OSDN Git Service
Junio C Hamano [Mon, 14 Jan 2013 15:48:39 +0000 (07:48 -0800)]
Merge branch 'jk/maint-fast-import-doc-dedup-done' into maint
* jk/maint-fast-import-doc-dedup-done:
git-fast-import(1): remove duplicate '--done' option
Junio C Hamano [Mon, 14 Jan 2013 15:34:37 +0000 (07:34 -0800)]
Merge branch 'jc/comment-cygwin-win32api-in-makefile' into maint
* jc/comment-cygwin-win32api-in-makefile:
Makefile: add comment on CYGWIN_V15_WIN32API
Junio C Hamano [Mon, 14 Jan 2013 15:34:12 +0000 (07:34 -0800)]
Merge branch 'rs/leave-base-name-in-name-field-of-tar' into maint
A tar archive created by "git archive" recorded a directory in a
way that made NetBSD's implementation of "tar" sometimes unhappy.
* rs/leave-base-name-in-name-field-of-tar:
archive-tar: split long paths more carefully
Junio C Hamano [Mon, 14 Jan 2013 15:33:48 +0000 (07:33 -0800)]
Merge branch 'jl/interrupt-clone-remove-separate-git-dir' into maint
When "git clone --separate-git-dir=$over_there" is interrupted, it
failed to remove the real location of the $GIT_DIR it created. This
was most visible when interrupting a submodule update.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
Junio C Hamano [Mon, 14 Jan 2013 15:33:30 +0000 (07:33 -0800)]
Merge branch 'jc/maint-fmt-merge-msg-no-edit-lose-credit' into maint
"git merge --no-edit" computed who were involved in the work done
on the side branch, even though that information is to be discarded
without getting seen in the editor.
* jc/maint-fmt-merge-msg-no-edit-lose-credit:
merge --no-edit: do not credit people involved in the side branch
Junio C Hamano [Mon, 14 Jan 2013 15:33:08 +0000 (07:33 -0800)]
Merge branch 'jc/apply-trailing-blank-removal' into maint
"git apply" misbehaved when fixing whitespace breakages by removing
excess trailing blank lines.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
Junio C Hamano [Mon, 14 Jan 2013 15:32:25 +0000 (07:32 -0800)]
Merge branch 'pf/editor-ignore-sigint' into maint
The behaviour visible to the end users was confusing, when they
attempt to kill a process spawned in the editor that was in turn
launched by Git with SIGINT (or SIGQUIT), as Git would catch that
signal and die. We ignore these signals now.
* pf/editor-ignore-sigint:
fix compilation with NO_PTHREADS
launch_editor: propagate signals from editor to git
run-command: do not warn about child death from terminal
launch_editor: ignore terminal signals while editor has control
launch_editor: refactor to use start/finish_command
run-command: drop silent_exec_failure arg from wait_or_whine
Junio C Hamano [Mon, 14 Jan 2013 15:32:18 +0000 (07:32 -0800)]
Merge branch 'mk/maint-graph-infinity-loop' into maint
* mk/maint-graph-infinity-loop:
graph.c: infinite loop in git whatchanged --graph -m
Junio C Hamano [Sat, 12 Jan 2013 00:51:01 +0000 (16:51 -0800)]
Merge branch 'as/api-allocation-doc' into maint
* as/api-allocation-doc:
api-allocation-growing.txt: encourage better variable naming
Junio C Hamano [Sat, 12 Jan 2013 00:49:37 +0000 (16:49 -0800)]
Merge branch 'jk/enable-test-lint-by-default' into maint
We have two simple and quick tests to catch common mistakes when
writing test scripts, but we did not run them by default when
running tests.
* jk/enable-test-lint-by-default:
tests: turn on test-lint by default
Junio C Hamano [Sat, 12 Jan 2013 00:49:01 +0000 (16:49 -0800)]
Merge branch 'ap/merge-stop-at-prepare-commit-msg-failure' into maint
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
Junio C Hamano [Sat, 12 Jan 2013 00:48:54 +0000 (16:48 -0800)]
Merge branch 'jc/submittingpatches' into maint
* jc/submittingpatches:
SubmittingPatches: give list and maintainer addresses
SubmittingPatches: remove overlong checklist
SubmittingPatches: mention subsystems with dedicated repositories
SubmittingPatches: who am I and who cares?
Junio C Hamano [Sat, 12 Jan 2013 00:48:30 +0000 (16:48 -0800)]
Merge branch 'os/gitweb-highlight-uncaptured' into maint
"gitweb", when sorting by age to show repositories with new
activities first, used to sort repositories with absolutely nothing
in it early, which was not very useful.
* os/gitweb-highlight-uncaptured:
gitweb: fix error in sanitize when highlight is enabled
Junio C Hamano [Sat, 12 Jan 2013 00:48:03 +0000 (16:48 -0800)]
Merge branch 'jn/less-reconfigure' into maint
When autoconf is used, any build on a different commit always ran
"config.status --recheck" even when unnecessary.
* jn/less-reconfigure:
build: do not automatically reconfigure unless configure.ac changed
Junio C Hamano [Sat, 12 Jan 2013 00:47:56 +0000 (16:47 -0800)]
Merge branch 'kb/maint-bundle-doc' into maint
* kb/maint-bundle-doc:
Documentation: full-ness of a bundle is significant for cloning
Documentation: correct example restore from bundle
Junio C Hamano [Sat, 12 Jan 2013 00:47:34 +0000 (16:47 -0800)]
Merge branch 'as/test-name-alias-uniquely' into maint
* as/test-name-alias-uniquely:
Use longer alias names in subdirectory tests
Junio C Hamano [Sat, 12 Jan 2013 00:47:07 +0000 (16:47 -0800)]
Merge branch 'jn/warn-on-inaccessible-loosen' into maint
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Junio C Hamano [Sat, 12 Jan 2013 00:46:46 +0000 (16:46 -0800)]
Merge branch 'ja/directory-attrs' into maint
The attribute mechanism didn't allow limiting attributes to be
applied to only a single directory itself with "path/" like the
exclude mechanism does.
* ja/directory-attrs:
Add directory pattern matching to attributes
Junio C Hamano [Sat, 12 Jan 2013 00:45:44 +0000 (16:45 -0800)]
Merge branch 'jc/fetch-ignore-symref' into maint
"git fetch --mirror" and fetch that uses other forms of refspec with
wildcard used to attempt to update a symbolic ref that match the
wildcard on the receiving end, which made little sense (the real ref
that is pointed at by the symbolic ref would be updated anyway).
Symbolic refs no longer are affected by such a fetch.
* jc/fetch-ignore-symref:
fetch: ignore wildcarded refspecs that update local symbolic refs
Junio C Hamano [Sat, 12 Jan 2013 00:45:06 +0000 (16:45 -0800)]
Merge branch 'ss/svn-prompt' into maint
The way "git svn" asked for password using SSH_ASKPASS and
GIT_ASKPASS was not in line with the rest of the system.
* ss/svn-prompt:
git-svn, perl/Git.pm: extend and use Git->prompt method for querying users
perl/Git.pm: Honor SSH_ASKPASS as fallback if GIT_ASKPASS is not set
git-svn, perl/Git.pm: add central method for prompting passwords
Junio C Hamano [Thu, 10 Jan 2013 22:17:13 +0000 (14:17 -0800)]
Prepare for 1.8.1.1
Christian Couder [Tue, 18 Dec 2012 15:26:38 +0000 (16:26 +0100)]
Makefile: detect when PYTHON_PATH changes
When make is run, the python scripts are created from *.py files that
are changed to use the python given by PYTHON_PATH. And PYTHON_PATH
is set by default to /usr/bin/python on Linux.
However, next time make is run with a different value in PYTHON_PATH,
we failed to regenerate these scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 10 Jan 2013 22:11:18 +0000 (14:11 -0800)]
Merge branch 'ta/remove-stale-translated-tut' into maint
* ta/remove-stale-translated-tut:
Remove Documentation/pt_BR/gittutorial.txt
Junio C Hamano [Thu, 10 Jan 2013 22:10:40 +0000 (14:10 -0800)]
Merge branch 'tb/test-t9810-no-sed-i' into maint
* tb/test-t9810-no-sed-i:
t9810: Do not use sed -i
Junio C Hamano [Thu, 10 Jan 2013 22:10:36 +0000 (14:10 -0800)]
Merge branch 'tb/test-t9020-no-which' into maint
* tb/test-t9020-no-which:
t9020: which is not portable
Junio C Hamano [Thu, 10 Jan 2013 22:04:26 +0000 (14:04 -0800)]
Merge branch 'mh/pthreads-autoconf' into maint
* mh/pthreads-autoconf:
configure.ac: fix pthreads detection on Mac OS X
Junio C Hamano [Thu, 10 Jan 2013 22:04:24 +0000 (14:04 -0800)]
Merge branch 'jc/same-encoding' into maint
* jc/same-encoding:
format_commit_message(): simplify calls to logmsg_reencode()
Junio C Hamano [Thu, 10 Jan 2013 22:04:22 +0000 (14:04 -0800)]
Merge branch 'sp/shortlog-missing-lf' into maint
* sp/shortlog-missing-lf:
strbuf_add_wrapped*(): Remove unused return value
shortlog: fix wrapping lines of wraplen
Junio C Hamano [Thu, 10 Jan 2013 22:04:21 +0000 (14:04 -0800)]
Merge branch 'md/gitweb-sort-by-age' into maint
* md/gitweb-sort-by-age:
gitweb: Sort projects with undefined ages last
Junio C Hamano [Thu, 10 Jan 2013 22:04:19 +0000 (14:04 -0800)]
Merge branch 'nd/invalidate-i-t-a-cache-tree' into maint
* nd/invalidate-i-t-a-cache-tree:
cache-tree: invalidate i-t-a paths after generating trees
cache-tree: fix writing cache-tree when CE_REMOVE is present
cache-tree: replace "for" loops in update_one with "while" loops
cache-tree: remove dead i-t-a code in verify_cache()
Junio C Hamano [Thu, 10 Jan 2013 22:04:17 +0000 (14:04 -0800)]
Merge branch 'jk/repack-ref-racefix' into maint
* jk/repack-ref-racefix:
refs: do not use cached refs in repack_without_ref
Junio C Hamano [Thu, 10 Jan 2013 22:03:54 +0000 (14:03 -0800)]
Merge branch 'rb/http-cert-cred-no-username-prompt' into maint
* rb/http-cert-cred-no-username-prompt:
http.c: Avoid username prompt for certifcate credentials
John Keeping [Mon, 7 Jan 2013 11:57:09 +0000 (11:57 +0000)]
git-fast-import(1): remove duplicate '--done' option
The '--done' option to git-fast-import is documented twice in its manual
page. Combine the best bits of each description, keeping the location
of the instance that was added first.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 8 Jan 2013 20:23:01 +0000 (21:23 +0100)]
t1402: work around shell quoting issue on NetBSD
The test fails for me on NetBSD 6.0.1 and reports:
ok 1 - ref name '' is invalid
ok 2 - ref name '/' is invalid
ok 3 - ref name '/' is invalid with options --allow-onelevel
ok 4 - ref name '/' is invalid with options --normalize
error: bug in the test script: not 2 or 3 parameters to test-expect-success
The alleged bug is in this line:
invalid_ref NOT_MINGW '/' '--allow-onelevel --normalize'
invalid_ref() constructs a test case description using its last argument,
but the shell seems to split it up into two pieces if it contains a
space. Minimal test case:
# on NetBSD with /bin/sh
$ a() { echo $#-$1-$2; }
$ t="x"; a "${t:+$t}"
1-x-
$ t="x y"; a "${t:+$t}"
2-x-y
$ t="x y"; a "${t:+x y}"
1-x y-
# and with bash
$ t="x y"; a "${t:+$t}"
1-x y-
$ t="x y"; a "${t:+x y}"
1-x y-
This may be a bug in the shell, but here's a simple workaround: Construct
the description string first and store it in a variable, and then use
that to call test_expect_success().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 8 Jan 2013 19:17:10 +0000 (11:17 -0800)]
Merge branch 'ms/subtree-fixlets' into maint
* ms/subtree-fixlets:
git-subtree: fix typo in manpage
git-subtree: ignore git-subtree executable
Junio C Hamano [Tue, 8 Jan 2013 19:17:07 +0000 (11:17 -0800)]
Merge branch 'ss/nedmalloc-compilation' into maint
* ss/nedmalloc-compilation:
nedmalloc: Fix a compile warning (exposed as error) with GCC 4.7.2
Junio C Hamano [Tue, 8 Jan 2013 19:17:05 +0000 (11:17 -0800)]
Merge branch 'jc/maint-fnmatch-old-style-definition' into maint
* jc/maint-fnmatch-old-style-definition:
compat/fnmatch: update old-style definition to ANSI
Junio C Hamano [Tue, 8 Jan 2013 19:17:03 +0000 (11:17 -0800)]
Merge branch 'jc/test-portability' into maint
* jc/test-portability:
t9020: use configured Python to run the test helper
t3600: Avoid "cp -a", which is a GNUism
Junio C Hamano [Tue, 8 Jan 2013 19:17:01 +0000 (11:17 -0800)]
Merge branch 'jc/maint-fbsd-sh-ifs-workaround' into maint
* jc/maint-fbsd-sh-ifs-workaround:
sh-setup: work around "unset IFS" bug in some shells
Junio C Hamano [Tue, 8 Jan 2013 19:16:58 +0000 (11:16 -0800)]
Merge branch 'jc/mkstemp-more-careful-error-reporting' into maint
* jc/mkstemp-more-careful-error-reporting:
xmkstemp(): avoid showing truncated template more carefully
Junio C Hamano [Tue, 8 Jan 2013 19:16:56 +0000 (11:16 -0800)]
Merge branch 'jc/test-cvs-no-init-in-existing-dir' into maint
* jc/test-cvs-no-init-in-existing-dir:
t9200: let "cvs init" create the test repository
Junio C Hamano [Tue, 8 Jan 2013 19:16:52 +0000 (11:16 -0800)]
Merge branch 'jc/maint-test-portability' into maint
* jc/maint-test-portability:
t4014: fix arguments to grep
t9502: do not assume GNU tar
t0200: "locale" may not exist
W. Trevor King [Tue, 8 Jan 2013 15:47:37 +0000 (10:47 -0500)]
remote-hg: Fix biridectionality -> bidirectionality typos
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Levedahl [Sun, 6 Jan 2013 19:56:33 +0000 (11:56 -0800)]
Makefile: add comment on CYGWIN_V15_WIN32API
There is no documented, reliable, and future-proof method to
determine the installed w32api version on Cygwin. There are many
things that can be done that will work frequently, except when they
won't.
The only sane thing is to follow the guidance of the Cygwin
developers: the only supported configuration is that which the
current setup.exe produces, and in the case of problems, if the
installation is not up to date then updating is the first required
action.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adam Spiers [Sun, 6 Jan 2013 15:35:05 +0000 (15:35 +0000)]
api-allocation-growing.txt: encourage better variable naming
The documentation for the ALLOC_GROW API implicitly encouraged
developers to use "ary" as the variable name for the array which is
dynamically grown. However "ary" is an unusual abbreviation hardly
used anywhere else in the source tree, and it is also better to name
variables based on their contents not on their type.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 5 Jan 2013 22:49:54 +0000 (23:49 +0100)]
archive-tar: split long paths more carefully
The name field of a tar header has a size of 100 characters. This limit
was extended long ago in a backward compatible way by providing the
additional prefix field, which can hold 155 additional characters. The
actual path is constructed at extraction time by concatenating the prefix
field, a slash and the name field.
get_path_prefix() is used to determine which slash in the path is used as
the cutting point and thus which part of it is placed into the field
prefix and which into the field name. It tries to cram as much into the
prefix field as possible. (And only if we can't fit a path into the
provided 255 characters we use a pax extended header to store it.)
If a path is longer than 100 but shorter than 156 characters and ends
with a slash (i.e. is for a directory) then get_path_prefix() puts the
whole path in the prefix field and leaves the name field empty. GNU tar
reconstructs the path without complaint, but the tar included with
NetBSD 6 does not: It reports the header to be invalid.
For compatibility with this version of tar, make sure to never leave the
name field empty. In order to do that, trim the trailing slash from the
part considered as possible prefix, if it exists -- that way the last
path component (or more, but not less) will end up in the name field.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 5 Jan 2013 14:52:29 +0000 (09:52 -0500)]
fix compilation with NO_PTHREADS
Commit
1327452 cleaned up an unused parameter from
wait_or_whine, but forgot to update a caller that is inside
"#ifdef NO_PTHREADS".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sat, 5 Jan 2013 20:17:04 +0000 (21:17 +0100)]
clone: support atomic operation with --separate-git-dir
Since
b57fb80a7d (init, clone: support --separate-git-dir for .git file)
git clone supports the --separate-git-dir option to create the git dir
outside the work tree. But when that option is used, the git dir won't be
deleted in case the clone fails like it would be without this option. This
makes clone lose its atomicity as in case of a failure a partly set up git
dir is left behind. A real world example where this leads to problems is
when "git submodule update" fails to clone a submodule and later calls to
"git submodule update" stumble over the partially set up git dir and try
to revive the submodule from there, which then fails with a not very user
friendly error message.
Fix that by updating the junk_git_dir variable (used to remember if and
what git dir should be removed in case of failure) to the new value given
with the --seperate-git-dir option. Also add a test for this to t5600 (and
while at it fix the former last test to not cd into a directory to test
for its existence but use "test -d" instead).
Reported-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Antoine Pelisse [Wed, 2 Jan 2013 18:42:50 +0000 (19:42 +0100)]
merge: Honor prepare-commit-msg return code
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 3 Jan 2013 07:17:51 +0000 (02:17 -0500)]
tests: turn on test-lint by default
The test Makefile knows about a few "lint" checks for common
errors. However, they are not enabled as part of "make test"
by default, which means that many people do not bother
running them. Since they are both quick to run and accurate
(i.e., no false positives), there should be no harm in
turning them on and helping submitters catch errors earlier.
We could just set:
TEST_LINT = test-lint
to enable all tests. But that would be unnecessarily
annoying later on if we add slower or less accurate tests
that should not be part of the default. Instead, we name the
tests individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Wed, 2 Jan 2013 08:25:44 +0000 (00:25 -0800)]
build: do not automatically reconfigure unless configure.ac changed
Starting with v1.7.12-rc0~4^2 (build: reconfigure automatically if
configure.ac changes, 2012-07-19), "config.status --recheck" is
automatically run every time the "configure" script changes. In
particular, that means the configuration procedure repeats whenever
the version number changes (since the configure script changes to
support "./configure --version" and "./configure --help"), making
bisecting painfully slow.
The intent was to make the reconfiguration process only trigger for
changes to configure.ac's logic. Tweak the Makefile rule to match
that intent by depending on configure.ac instead of configure.
Reported-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 2 Jan 2013 17:31:54 +0000 (09:31 -0800)]
SubmittingPatches: give list and maintainer addresses
We told readers to "send it to the list" (or the maintainer) without
telling what addresses are to be used. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 1 Jan 2013 23:19:00 +0000 (15:19 -0800)]
SubmittingPatches: remove overlong checklist
The section is no longer a concise checklist. It also talks about
things that are not covered in the "Long version" text, which means
people need to read both, covering more or less the same thing in
different phrasing.
Fold the details into the main text and remove the section.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Torsten Bögershausen [Tue, 1 Jan 2013 21:42:03 +0000 (22:42 +0100)]
t9020: which is not portable
Use type instead
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Torsten Bögershausen [Tue, 1 Jan 2013 21:40:37 +0000 (22:40 +0100)]
t9810: Do not use sed -i
sed -i is not portable on all systems. Use sed with different input
and output files. Utilize a tmp file whenever needed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Orgad Shaneh [Sun, 30 Dec 2012 11:52:53 +0000 (13:52 +0200)]
gitweb: fix error in sanitize when highlight is enabled
$1 becomes undef by internal regex, since it has no capture groups.
Match against accpetable control characters using index() instead of a regex.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 1 Jan 2013 20:46:15 +0000 (12:46 -0800)]
Documentation: full-ness of a bundle is significant for cloning
Not necessarily every bundle file can be cloned from. Only the ones
that do not need prerequisites can.
When
1d52b02 (Documentation: minor grammatical fixes and rewording
in git-bundle.txt, 2009-03-22) reworded this paragraph, it lost a
critical hint to tell readers why this particular bundle can be
cloned from. Resurrect it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 1 Jan 2013 22:37:56 +0000 (14:37 -0800)]
SubmittingPatches: mention subsystems with dedicated repositories
These were only mentioned in periodical "A note from the maintainer"
posting and not in the documentation suite. SubmittingPatches has a
section to help contributors decide on what commit to base their
changes, which is the most suitable place for this information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 1 Jan 2013 22:35:22 +0000 (14:35 -0800)]
SubmittingPatches: who am I and who cares?
The introductory text in the "long version" talks about the origin
of this document with "I started ...", but it is unclear who that I
is, and more importantly, it is not interesting how it was started.
Just state the purpose of the document to help readers decide if it
is releavant to them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kirill Brilliantov [Tue, 1 Jan 2013 13:54:44 +0000 (17:54 +0400)]
Documentation: correct example restore from bundle
Because the bundle created in the example does not record HEAD, "git
clone" will not check out the files to the working tree:
$ git clone pr.bundle q/
Cloning into 'q'...
Receiving objects: 100% (619/619), 13.52 MiB | 18.74 MiB/s, done.
Resolving deltas: 100% (413/413), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Avoid alarming the readers by adding "-b master" to the example. A
better fix may be to arrange the bundle created in the earlier step
to record HEAD, so that it can be cloned without this workaround.
Signed-off-by: Brilliantov Kirill Vladimirovich <brilliantov@inbox.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 31 Dec 2012 22:24:22 +0000 (14:24 -0800)]
Git 1.8.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 28 Dec 2012 23:29:31 +0000 (15:29 -0800)]
merge --no-edit: do not credit people involved in the side branch
The credit lines "By" and "Via" to credit authors and committers for
their contributions on the side branch are meant as a hint to the
integrator to decide whom to mention in the log message text. After
the integrator saves the message in the editor, they are meant to go
away and that is why they are commented out.
When a merge is recorded without editing the generated message,
however, its contents do not go through the normal stripspace()
and these lines are left in the merge.
Stop producing them when we know the merge is going to be recorded
without editing, i.e. when --no-edit is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aaron Schrab [Fri, 28 Dec 2012 23:03:06 +0000 (18:03 -0500)]
Use longer alias names in subdirectory tests
When testing aliases in t/t1020-subdirectory.sh use longer names so that
they're less likely to conflict with a git-* command somewhere in the
$PATH.
I have a git-ss command in my path which prevents the 'ss' alias from
being used. This command will always fail for git.git, causing the test
to fail. Even if the command succeeded, that would be a false success
for the test since the alias wasn't actually used. A longer, more
descriptive name will make it much less likely that somebody has a
command in their $PATH which will shadow the alias created for the test.
While here, use a longer name for the 'test' alias as well since that is
also short and meaningful enough to make it not unlikely that somebody
would have a command in their $PATH which will shadow that as well.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 28 Dec 2012 00:00:07 +0000 (16:00 -0800)]
Merge branch 'so/prompt-command'
Finishing touches...
* so/prompt-command:
make __git_ps1 accept a third parameter in pcmode
Junio C Hamano [Thu, 27 Dec 2012 23:59:42 +0000 (15:59 -0800)]
Sync with 1.8.0.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2012 23:57:20 +0000 (15:57 -0800)]
Git 1.8.0.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 12 Dec 2012 18:06:24 +0000 (10:06 -0800)]
git(1): show link to contributor summary page
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2012 23:38:34 +0000 (15:38 -0800)]
Merge branch 'sl/maint-git-svn-docs' into maint
* sl/maint-git-svn-docs:
git-svn: Note about tags.
git-svn: Expand documentation for --follow-parent
git-svn: Recommend use of structure options.
git-svn: Document branches with at-sign(@).
Sebastian Leske [Fri, 23 Nov 2012 07:29:38 +0000 (08:29 +0100)]
git-svn: Note about tags.
Document that 'git svn' will import SVN tags as branches.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sebastian Leske [Fri, 30 Nov 2012 07:16:30 +0000 (08:16 +0100)]
git-svn: Expand documentation for --follow-parent
Describe what the option --follow-parent does, and what happens if it is
set or unset.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sebastian Leske [Fri, 30 Nov 2012 07:16:30 +0000 (08:16 +0100)]
git-svn: Recommend use of structure options.
Document that when using git svn, one should usually either use the
directory structure options to import branches as branches, or only
import one subdirectory. The default behaviour of cloning all branches
and tags as subdirectories in the working copy is usually not what the
user wants.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sebastian Leske [Fri, 30 Nov 2012 07:16:30 +0000 (08:16 +0100)]
git-svn: Document branches with at-sign(@).
git svn sometimes creates branches with an at-sign in the name
(branchname@revision). These branches confuse many users and it is a FAQ
why they are created. Document when git svn creates them.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2012 23:34:37 +0000 (15:34 -0800)]
Merge branch 'gb/maint-doc-svn-log-window-size' into maint
* branch 'gb/maint-doc-svn-log-window-size':
Document git-svn fetch --log-window-size parameter
Junio C Hamano [Thu, 27 Dec 2012 23:32:27 +0000 (15:32 -0800)]
Merge branch 'km/maint-doc-git-reset' into maint
* branch 'km/maint-doc-git-reset':
doc: git-reset: make "<mode>" optional
Max Horn [Tue, 27 Nov 2012 23:03:21 +0000 (00:03 +0100)]
git-remote-helpers.txt: document invocation before input format
In the distant past, the order things were documented was
'Invocation', 'Commands', 'Capabilities', ...
Then it was decided that before giving a list of Commands, there
should be an overall description of the 'Input format', which was
a wise decision. However, this description was put as the very
first thing, with the rationale that any implementor would want
to know that first.
However, it seems an implementor would actually first need to
know how the remote helper will be invoked, so moving
'Invocation' to the front again seems logical. Moreover, we now
don't switch from discussing the input format to the invocation
style and then back to input related stuff.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Dec 2012 23:27:46 +0000 (15:27 -0800)]
Merge branch 'jk/avoid-mailto-invalid-in-doc' into maint
* jk/avoid-mailto-invalid-in-doc:
Documentation: don't link to example mail addresses
Junio C Hamano [Thu, 27 Dec 2012 23:24:51 +0000 (15:24 -0800)]
Merge branch 'tj/maint-doc-commit-sign' into maint
* branch 'tj/maint-doc-commit-sign':
Add -S, --gpg-sign option to manpage of "git commit"
Ramkumar Ramachandra [Tue, 13 Nov 2012 15:42:44 +0000 (21:12 +0530)]
Documentation: move diff.wordRegex from config.txt to diff-config.txt
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Ackermann [Thu, 27 Dec 2012 14:15:52 +0000 (15:15 +0100)]
Remove Documentation/pt_BR/gittutorial.txt
This file is rather outdated and IMHO shouldn't be there in the first place.
(If there are translations of the Git documentation they are better be kept
separate from the original documentation.)
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simon Oosthoek [Wed, 26 Dec 2012 19:15:05 +0000 (20:15 +0100)]
make __git_ps1 accept a third parameter in pcmode
The optional third parameter when __git_ps1 is used in
PROMPT_COMMAND mode as format string for printf to further
customize the way the git status string is embedded in the
user's PS1 prompt.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 25 Dec 2012 01:09:49 +0000 (17:09 -0800)]
t9200: let "cvs init" create the test repository
Some platforms (e.g. NetBSD 6.0) seem to configure their CVS to
allow "cvs init" in an existing directory only to members of
"cvsadmin".
Instead of preparing an empty directory and then running "cvs init"
on it, let's run "cvs init" and let it create the necessary
directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 23 Dec 2012 04:40:07 +0000 (20:40 -0800)]
Merge branch 'maint'
Junio C Hamano [Sun, 23 Dec 2012 04:38:07 +0000 (20:38 -0800)]
Merge branch 'jc/doc-diff-blobs' into maint
* jc/doc-diff-blobs:
Documentation: Describe "git diff <blob> <blob>" separately
Junio C Hamano [Sun, 23 Dec 2012 04:38:02 +0000 (20:38 -0800)]
Merge branch 'cr/doc-checkout-branch' into maint
* cr/doc-checkout-branch:
Documentation/git-checkout.txt: document
70c9ac2 behavior
Documentation/git-checkout.txt: clarify usage
Junio C Hamano [Sun, 23 Dec 2012 04:37:42 +0000 (20:37 -0800)]
Merge branch 'ta/api-index-doc' into maint
* ta/api-index-doc:
Remove misleading date from api-index-skel.txt
Junio C Hamano [Sun, 23 Dec 2012 04:37:33 +0000 (20:37 -0800)]
Merge branch 'as/doc-for-devs' into maint
* as/doc-for-devs:
Documentation: move support for old compilers to CodingGuidelines
SubmittingPatches: add convention of prefixing commit messages
Junio C Hamano [Sun, 23 Dec 2012 04:37:27 +0000 (20:37 -0800)]
Merge branch 'sl/readme-gplv2' into maint
* sl/readme-gplv2:
README: it does not matter who the current maintainer is
README: Git is released under the GPLv2, not just "the GPL"
Junio C Hamano [Sun, 23 Dec 2012 04:37:22 +0000 (20:37 -0800)]
Merge branch 'jc/fetch-tags-doc' into maint
* jc/fetch-tags-doc:
fetch --tags: clarify documentation
Junio C Hamano [Sun, 23 Dec 2012 04:37:09 +0000 (20:37 -0800)]
Merge branch 'nd/index-format-doc' into maint
* nd/index-format-doc:
index-format.txt: clarify what is "invalid"
Junio C Hamano [Sun, 23 Dec 2012 04:36:42 +0000 (20:36 -0800)]
Merge branch 'jk/mailmap-cleanup' into maint
* jk/mailmap-cleanup:
contrib: update stats/mailmap script
.mailmap: normalize emails for Linus Torvalds
.mailmap: normalize emails for Jeff King
.mailmap: fix broken entry for Martin Langhoff
.mailmap: match up some obvious names/emails
Junio C Hamano [Sun, 23 Dec 2012 04:35:34 +0000 (20:35 -0800)]
Merge branch 'ta/doc-cleanup' into maint
* ta/doc-cleanup:
Documentation: build html for all files in technical and howto
Documentation/howto: convert plain text files to asciidoc
Documentation/technical: convert plain text files to asciidoc
Change headline of technical/send-pack-pipeline.txt to not confuse its content with content from git-send-pack.txt
Shorten two over-long lines in git-bisect-lk2009.txt by abbreviating some sha1
Split over-long synopsis in git-fetch-pack.txt into several lines
Thomas Ackermann [Sat, 22 Dec 2012 18:34:27 +0000 (19:34 +0100)]
Sort howto documents in howto-index.txt
Howto documents in howto-index.txt were listed in a rather
random order. So better sort them.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Schubert [Sat, 22 Dec 2012 14:46:02 +0000 (15:46 +0100)]
git-subtree: fix typo in manpage
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Schubert [Sat, 22 Dec 2012 14:45:40 +0000 (15:45 +0100)]
git-subtree: ignore git-subtree executable
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 22 Dec 2012 19:48:47 +0000 (11:48 -0800)]
Git 1.8.1-rc3
The changes since -rc2 are mostly documentation updates.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 21 Dec 2012 23:19:25 +0000 (15:19 -0800)]
Merge branch 'ta/new-command-howto'
* ta/new-command-howto:
Move ./technical/api-command.txt to ./howto/new-command.txt
Junio C Hamano [Fri, 21 Dec 2012 23:19:13 +0000 (15:19 -0800)]
Merge branch 'jc/doc-diff-blobs'
"git diff <blob> <blob>" was not documented and was only hinted as
an extension to "git diff <commit> <commit> -- <pathspec>", but
comparison between two blobs are more special than that. It does
not take any pathspec to begin with.
* jc/doc-diff-blobs:
Documentation: Describe "git diff <blob> <blob>" separately
Junio C Hamano [Fri, 21 Dec 2012 23:19:08 +0000 (15:19 -0800)]
Merge branch 'cr/doc-checkout-branch'
Document the magic "git checkout <no-such-branch>" hack to create
local branch out of a remote tracking branch that hasn't been
documented so far.
* cr/doc-checkout-branch:
Documentation/git-checkout.txt: document
70c9ac2 behavior
Documentation/git-checkout.txt: clarify usage
Junio C Hamano [Fri, 21 Dec 2012 23:19:04 +0000 (15:19 -0800)]
Merge branch 'ta/api-index-doc'
* ta/api-index-doc:
Remove misleading date from api-index-skel.txt
Junio C Hamano [Fri, 21 Dec 2012 23:18:57 +0000 (15:18 -0800)]
Merge branch 'jk/avoid-mailto-invalid-in-doc'
Avoids invalid sample e-mail addresses from becoming mailto links
in the formatted output.
* jk/avoid-mailto-invalid-in-doc:
Documentation: don't link to example mail addresses