OSDN Git Service
Vladimir Zapolskiy [Tue, 29 Jan 2019 19:20:41 +0000 (21:20 +0200)]
ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage
[ Upstream commit
dc141b99fc36cf910a1d8d5ee30f43f2442fd1bd ]
The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which
supplies SD/MMC card's power, has a constant output voltage level
of either 3.15V or 3.3V, the actual value depends on JP4 position,
the power rail is referenced as VCC_SDIO in the board hardware manual.
Fixes:
d06670e96267 ("arm: dts: phy3250: add SD fixed regulator")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Tue, 29 Jan 2019 19:20:40 +0000 (21:20 +0200)]
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property
[ Upstream commit
30fc01bae3cda747e7d9c352b1aa51ca113c8a9d ]
The originally added ARM PrimeCell PL111 clocks property misses
the required "clcdclk" clock, which is the same as a clock to enable
the LCD controller on NXP LPC3230 and NXP LPC3250 SoCs.
Fixes:
93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Tue, 29 Jan 2019 19:20:39 +0000 (21:20 +0200)]
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant
[ Upstream commit
7a0790a4121cbcd111cc537cdc801c46ccb789ee ]
ARM PrimeCell PL111 LCD controller is found on On NXP LPC3230
and LPC3250 SoCs variants, the original reference in compatible
property to an older one ARM PrimeCell PL110 is invalid.
Fixes:
e04920d9efcb3 ("ARM: LPC32xx: DTS files for device tree conversion")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Sat, 26 Jan 2019 14:29:21 +0000 (16:29 +0200)]
ARM: dts: lpc32xx: reparent keypad controller to SIC1
[ Upstream commit
489261c45f0ebbc1c2813f337bbdf858267f5033 ]
After switching to a new interrupt controller scheme by separating SIC1
and SIC2 from MIC interrupt controller just one SoC keypad controller
was not taken into account, fix it now:
WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:524 irq_domain_associate+0x50/0x1b0
error: hwirq 0x36 is too large for interrupt-controller@
40008000
...
lpc32xx_keys
40050000.key: failed to get platform irq
lpc32xx_keys: probe of
40050000.key failed with error -22
Fixes:
9b8ad3fb81ae ("ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Sat, 26 Jan 2019 14:29:20 +0000 (16:29 +0200)]
ARM: dts: lpc32xx: add required clocks property to keypad device node
[ Upstream commit
3e88bc38b9f6fe4b69cecf81badd3c19fde97f97 ]
NXP LPC32xx keypad controller requires a clock property to be defined.
The change fixes the driver initialization problem:
lpc32xx_keys
40050000.key: failed to get clock
lpc32xx_keys: probe of
40050000.key failed with error -2
Fixes:
93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device nodes")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Fri, 1 Feb 2019 00:52:45 +0000 (01:52 +0100)]
driver core: Do not call rpm_put_suppliers() in pm_runtime_drop_link()
[ Upstream commit
a1fdbfbb1da2063ba98a12eb6f1bdd07451c7145 ]
Calling rpm_put_suppliers() from pm_runtime_drop_link() is excessive
as it affects all suppliers of the consumer device and not just the
one pointed to by the device link being dropped. Worst case it may
cause the consumer device to stop working unexpectedly. Moreover, in
principle it is racy with respect to runtime PM of the consumer
device.
To avoid these problems drop runtime PM references on the particular
supplier pointed to by the link in question only and do that after
the link has been dropped from the consumer device's list of links to
suppliers, which is in device_link_free().
Fixes:
a0504aecba76 ("PM / runtime: Drop usage count for suppliers at device link removal")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Fri, 1 Feb 2019 00:49:14 +0000 (01:49 +0100)]
driver core: Fix handling of runtime PM flags in device_link_add()
[ Upstream commit
e2f3cd831a280fc226118d9369bf3f77aab58c56 ]
After commit
ead18c23c263 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally without updating its flags. It is
possible, however, that the second (or any subsequent) caller of
device_link_add() for the same consumer-supplier pair will pass
DL_FLAG_PM_RUNTIME, possibly along with DL_FLAG_RPM_ACTIVE, in flags
to it and the existing link may not behave as expected then.
First, if DL_FLAG_PM_RUNTIME is not set in the existing link's flags
at all, it needs to be set like during the original initialization of
the link.
Second, if DL_FLAG_RPM_ACTIVE is passed to device_link_add() in flags
(in addition to DL_FLAG_PM_RUNTIME), the existing link should to be
updated to reflect the "active" runtime PM configuration of the
consumer-supplier pair and extra care must be taken here to avoid
possible destructive races with runtime PM of the consumer.
To that end, redefine the rpm_active field in struct device_link
as a refcount, initialize it to 1 and make rpm_resume() (for the
consumer) and device_link_add() increment it whenever they acquire
a runtime PM reference on the supplier device. Accordingly, make
rpm_suspend() (for the consumer) and pm_runtime_clean_up_links()
decrement it and drop runtime PM references to the supplier
device in a loop until rpm_active becones 1 again.
Fixes:
ead18c23c263 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Fri, 1 Feb 2019 00:47:53 +0000 (01:47 +0100)]
driver core: Do not resume suppliers under device_links_write_lock()
[ Upstream commit
5db25c9eb893df8f6b93c1d97b8006d768e1b6f5 ]
It is incorrect to call pm_runtime_get_sync() under
device_links_write_lock(), because it may end up trying to take
device_links_read_lock() while resuming the target device and that
will deadlock in the non-SRCU case, so avoid that by resuming the
supplier device in device_link_add() before calling
device_links_write_lock().
Fixes:
21d5c57b3726 ("PM / runtime: Use device links")
Fixes:
baa8809f6097 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Fri, 1 Feb 2019 00:46:54 +0000 (01:46 +0100)]
driver core: Avoid careless re-use of existing device links
[ Upstream commit
f265df550a4350dce0a4d721a77c52e4b847ea40 ]
After commit
ead18c23c263 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally. However, if the flags passed to
it on the second (or any subsequent) attempt to create a device
link between the same consumer-supplier pair are not compatible with
the existing link's flags, that is incorrect.
First off, if the existing link is stateless and the next caller of
device_link_add() for the same consumer-supplier pair wants a
stateful one, or the other way around, the existing link cannot be
returned, because it will not match the expected behavior, so make
device_link_add() dump the stack and return NULL in that case.
Moreover, if the DL_FLAG_AUTOREMOVE_CONSUMER flag is passed to
device_link_add(), its caller will expect its reference to the link
to be dropped automatically on consumer driver removal, which will
not happen if that flag is not set in the link's flags (and
analogously for DL_FLAG_AUTOREMOVE_SUPPLIER). For this reason, make
device_link_add() update the existing link's flags accordingly
before returning it to the caller.
Fixes:
ead18c23c263 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Fri, 1 Feb 2019 00:45:55 +0000 (01:45 +0100)]
driver core: Fix DL_FLAG_AUTOREMOVE_SUPPLIER device link flag handling
[ Upstream commit
c8d50986da5d74ddfc233b13b91d0a13369fa164 ]
Change the list walk in device_links_driver_cleanup() to a safe one
to avoid use-after-free when dropping a link from the list during the
walk.
Also, while at it, fix device_link_add() to refuse to create
stateless device links with DL_FLAG_AUTOREMOVE_SUPPLIER set, which is
an invalid combination (setting that flag means that the driver core
should manage the link, so it cannot be stateless), and extend the
kerneldoc comment of device_link_add() to cover the
DL_FLAG_AUTOREMOVE_SUPPLIER flag properly too.
Fixes:
1689cac5b32a ("driver core: Add flag to autoremove device link on supplier unbind")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Wed, 23 Jan 2019 11:24:18 +0000 (11:24 +0000)]
crypto: crypto4xx - Fix wrong ppc4xx_trng_probe()/ppc4xx_trng_remove() arguments
[ Upstream commit
6e88098ca43a3d80ae86908f7badba683c8a0d84 ]
When building without CONFIG_HW_RANDOM_PPC4XX, I hit the following build failure:
drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_probe':
drivers/crypto/amcc/crypto4xx_core.c:1407:20: error: passing argument 1 of 'ppc4xx_trng_probe' from incompatible pointer type [-Werror=incompatible-pointer-types]
In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0:
drivers/crypto/amcc/crypto4xx_trng.h:28:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *'
drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_remove':
drivers/crypto/amcc/crypto4xx_core.c:1434:21: error: passing argument 1 of 'ppc4xx_trng_remove' from incompatible pointer type [-Werror=incompatible-pointer-types]
In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0:
drivers/crypto/amcc/crypto4xx_trng.h:30:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *'
This patch fix the needed argument of ppc4xx_trng_probe()/ppc4xx_trng_remove() in that case.
Fixes:
5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Jian [Tue, 22 Jan 2019 22:45:38 +0000 (06:45 +0800)]
driver: uio: fix possible use-after-free in __uio_register_device
[ Upstream commit
221a1f4ac12d2ab46246c160b2e00d1b1160d5d9 ]
In uio_dev_add_attributes() error handing case, idev is used after
device_unregister(), in which 'idev' has been released, touch idev cause
use-after-free.
Fixes:
a93e7b331568 ("uio: Prevent device destruction while fds are open")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Jian [Tue, 22 Jan 2019 22:45:37 +0000 (06:45 +0800)]
driver: uio: fix possible memory leak in __uio_register_device
[ Upstream commit
1a392b3de7c5747506b38fc14b2e79977d3c7770 ]
'idev' is malloced in __uio_register_device() and leak free it before
leaving from the uio_get_minor() error handing case, it will cause
memory leak.
Fixes:
a93e7b331568 ("uio: Prevent device destruction while fds are open")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Wed, 30 Jan 2019 10:30:51 +0000 (18:30 +0800)]
tty: ipwireless: Fix potential NULL pointer dereference
[ Upstream commit
7dd50e205b3348dc7784efbdf85723551de64a25 ]
There is a potential NULL pointer dereference in case
alloc_ctrl_packet() fails and returns NULL.
Fixes:
099dc4fb6265 ("ipwireless: driver for PC Card 3G/UMTS modem")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 22 Jan 2019 17:03:08 +0000 (09:03 -0800)]
bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
[ Upstream commit
9bd34c63f5536c490c152833c77fa47f59aeade3 ]
Commit
84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x2f8/0x388
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
Data Access in Supervisor mode during Functional access
...
__pm_runtime_idle
omap_dm_timer_disable
pwm_omap_dmtimer_start
pwm_omap_dmtimer_enable
pwm_apply_state
pwm_vibrator_start
pwm_vibrator_play_work
This is because the timer that pwm-omap-dmtimer is using is now being
probed with ti-sysc interconnect target module instead of omap_device
and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
compatible with what omap_device has been doing.
We could fix this by reverting the timer changes and have the timer
probe again with omap_device. Or we could add more quirk handling to
ti-sysc driver. But as these options don't work nicely as longer term
solutions, let's just make timers probe with ti-sysc without any
quirks.
To do this, all we need to do is remove quirks for timers for ti-sysc,
and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
We should not use pm_runtime_irq_safe() anyways for drivers as it will
take a permanent use count on the parent device blocking the parent
devices from idling and has been forcing ti-sysc driver to use a
quirk flag.
Note that we will move the timer data to DEBUG section later on in
clean-up patches.
Fixes:
84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-By: Andreas Kemnade <andreas@kemnade.info>
Tested-By: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Thu, 8 Nov 2018 08:51:56 +0000 (09:51 +0100)]
iwlwifi: mvm: fix A-MPDU reference assignment
[ Upstream commit
1f7698abedeeb3fef3cbcf78e16f925df675a179 ]
The current code assigns the reference, and then goes to increment
it if the toggle bit has changed. That way, we get
Toggle 0 0 0 0 1 1 1 1
ID 1 1 1 1 1 2 2 2
Fix that by assigning the post-toggle ID to get
Toggle 0 0 0 0 1 1 1 1
ID 1 1 1 1 2 2 2 2
Reported-by: Danny Alexander <danny.alexander@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
fbe4112791b8 ("iwlwifi: mvm: update mpdu metadata API")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Sun, 27 Jan 2019 16:39:30 +0000 (00:39 +0800)]
arm64: dts: allwinner: h6: Move GIC device node fix base address ordering
[ Upstream commit
52d9bcb3d0de3fa1e07aff3800f857836d30410d ]
The GIC device node was placed out of order in the initial device tree
submission. Move it so the nodes are correctly sorted by base address
again.
Fixes:
e54be32d0273 ("arm64: allwinner: h6: add the basical Allwinner H6 DTSI file")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wenxu [Tue, 22 Jan 2019 10:39:51 +0000 (18:39 +0800)]
ip_tunnel: Fix route fl4 init in ip_md_tunnel_xmit
[ Upstream commit
6e6b904ad4f9aed43ec320afbd5a52ed8461ab41 ]
Init the gre_key from tuninfo->key.tun_id and init the mark
from the skb->mark, set the oif to zero in the collect metadata
mode.
Fixes:
cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Moni Shoua [Wed, 26 Dec 2018 17:21:21 +0000 (19:21 +0200)]
net/mlx5: Take lock with IRQs disabled to avoid deadlock
[ Upstream commit
33814e5d127e21f53b52e17b0722c1b57d4f4d29 ]
The lock in qp_table might be taken from process context or from
interrupt context. This may lead to a deadlock unless it is taken with
IRQs disabled.
Discovered by lockdep
================================
WARNING: inconsistent lock state
4.20.0-rc6
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W}
python/12572 [HC1[1]:SC0[0]:HE0:SE1] takes:
00000000052a4df4 (&(&table->lock)->rlock#2){?.+.}, /0x50 [mlx5_core]
{HARDIRQ-ON-W} state was registered at:
_raw_spin_lock+0x33/0x70
mlx5_get_rsc+0x1a/0x50 [mlx5_core]
mlx5_ib_eqe_pf_action+0x493/0x1be0 [mlx5_ib]
process_one_work+0x90c/0x1820
worker_thread+0x87/0xbb0
kthread+0x320/0x3e0
ret_from_fork+0x24/0x30
irq event stamp: 103928
hardirqs last enabled at (103927): [] nk+0x1a/0x1c
hardirqs last disabled at (103928): [] unk+0x1a/0x1c
softirqs last enabled at (103924): [] tcp_sendmsg+0x31/0x40
softirqs last disabled at (103922): [] 80
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&table->lock)->rlock#2);
lock(&(&table->lock)->rlock#2);
*** DEADLOCK ***
Fixes:
032080ab43ac ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mordechay Goodstein [Sun, 21 Oct 2018 15:27:26 +0000 (18:27 +0300)]
iwlwifi: mvm: avoid possible access out of array.
[ Upstream commit
b0d795a9ae558209656b18930c2b4def5f8fdfb8 ]
The value in txq_id can be out of array scope,
validate it before accessing the array.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes:
cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Fri, 25 Jan 2019 03:23:04 +0000 (11:23 +0800)]
clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it
[ Upstream commit
108a459ef4cd17a28711d81092044e597b5c7618 ]
The PLL-MIPI clock is somewhat special as it has its own LDOs which
need to be turned on for this PLL to actually work and output a clock
signal.
Add the 2 LDO enable bits to the gate bits.
Fixes:
5690879d93e8 ("clk: sunxi-ng: Add A23 CCU")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Fri, 25 Jan 2019 03:23:10 +0000 (11:23 +0800)]
ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address
[ Upstream commit
d027521497592773cd23d016d36975574d3452db ]
The NAND controller device node was inserted into the wrong position,
probably due to a rebase or merge, as the file's structure does not
provide enough context for git to accurately match the previous device
node block.
Fixes:
d7b843df13ea ("ARM: dts: sun8i: add NAND controller node for A23/A33")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huazhong Tan [Tue, 22 Jan 2019 23:39:32 +0000 (07:39 +0800)]
net: hns3: fix bug of ethtool_ops.get_channels for VF
[ Upstream commit
8be7362186bd5ccb5f6f72be49751ad2778e2636 ]
The current code returns the number of all queues that can be used and
the number of queues that have been allocated, which is incorrect.
What should be returned is the number of queues allocated for each enabled
TC and the number of queues that can be allocated.
This patch fixes it.
Fixes:
849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Wed, 23 Jan 2019 12:00:22 +0000 (20:00 +0800)]
spi/topcliff_pch: Fix potential NULL dereference on allocation error
[ Upstream commit
e902cdcb5112b89ee445588147964723fd69ffb4 ]
In pch_spi_handle_dma, it doesn't check for NULL returns of kcalloc
so it would result in an Oops.
Fixes:
c37f3c2749b5 ("spi/topcliff_pch: DMA support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Wong [Sun, 6 Jan 2019 08:21:03 +0000 (08:21 +0000)]
rtc: cmos: ignore bogus century byte
[ Upstream commit
2a4daadd4d3e507138f8937926e6a4df49c6bfdc ]
Older versions of Libreboot and Coreboot had an invalid value
(`3' in my case) in the century byte affecting the GM45 in
the Thinkpad X200. Not everybody's updated their firmwares,
and Linux <= 4.2 was able to read the RTC without problems,
so workaround this by ignoring invalid values.
Fixes:
3c217e51d8a272b9 ("rtc: cmos: century support")
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sylvain Chouleur <sylvain.chouleur@intel.com>
Cc: Patrick McDermott <patrick.mcdermott@libiquity.com>
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maor Gottlieb [Thu, 17 Jan 2019 18:08:15 +0000 (20:08 +0200)]
IB/mlx5: Don't override existing ip_protocol
[ Upstream commit
6113cc44015b41ca51c0a76fed82522b68108dac ]
Two flow specifications can set the ip protocol field in
the flow table entry:
1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly.
2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users
who want to receive specific L4 packets.
We need to avoid overriding of the ip_protocol with zeros,
in case that the user first put the L4 specification and
only then the L3.
Fixes:
ca0d47538528b ('IB/mlx5: Add support in TOS and protocol to flow steering')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacopo Mondi [Thu, 17 Jan 2019 14:33:04 +0000 (12:33 -0200)]
media: tw9910: Unregister subdevice with v4l2-async
[ Upstream commit
341fe1d301f587c930509f6b9153436b957f649c ]
As the tw9910 subdevice is registered through the v4l2-async framework,
use the v4l2-async provided function to register it.
Fixes:
7b20f325a566 ("media: i2c: tw9910: Remove soc_camera dependencies")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huazhong Tan [Fri, 18 Jan 2019 08:13:12 +0000 (16:13 +0800)]
net: hns3: fix wrong combined count returned by ethtool -l
[ Upstream commit
c3b9c50d1567aa12be4448fe85b09626eba2499c ]
The current code returns the number of all queues that can be used and
the number of queues that have been allocated, which is incorrect.
What should be returned is the number of queues allocated for each enabled
TC and the number of queues that can be allocated.
This patch fixes it.
Fixes:
482d2e9c1cc7 ("net: hns3: add support to query tqps number")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Israel Rukshin [Thu, 17 Jan 2019 15:45:45 +0000 (15:45 +0000)]
IB/iser: Pass the correct number of entries for dma mapped SGL
[ Upstream commit
57b26497fabe1b9379b59fbc7e35e608e114df16 ]
ib_dma_map_sg() augments the SGL into a 'dma mapped SGL'. This process may
change the number of entries and the lengths of each entry.
Code that touches dma_address is iterating over the 'dma mapped SGL' and
must use dma_nents which returned from ib_dma_map_sg().
ib_sg_to_pages() and ib_map_mr_sg() are using dma_address so they must use
dma_nents.
Fixes:
39405885005a ("IB/iser: Port to new fast registration API")
Fixes:
bfe066e256d5 ("IB/iser: Reuse ib_sg_to_pages")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Fri, 18 Jan 2019 09:06:52 +0000 (10:06 +0100)]
ASoC: imx-sgtl5000: put of nodes if finding codec fails
[ Upstream commit
d9866572486802bc598a3e8576a5231378d190de ]
Make sure to properly put the of node in case finding the codec
fails.
Fixes:
81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Biggers [Thu, 10 Jan 2019 20:17:58 +0000 (12:17 -0800)]
crypto: tgr192 - fix unaligned memory access
[ Upstream commit
f990f7fb58ac8ac9a43316f09a48cff1a49dda42 ]
Fix an unaligned memory access in tgr192_transform() by using the
unaligned access helpers.
Fixes:
06ace7a9bafe ("[CRYPTO] Use standard byte order macros wherever possible")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Wed, 9 Jan 2019 06:11:18 +0000 (06:11 +0000)]
crypto: brcm - Fix some set-but-not-used warning
[ Upstream commit
707d0cf8f7cff6dfee9197002859912310532c4f ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/bcm/cipher.c: In function 'handle_ahash_req':
drivers/crypto/bcm/cipher.c:720:15: warning:
variable 'chunk_start' set but not used [-Wunused-but-set-variable]
drivers/crypto/bcm/cipher.c: In function 'spu_rx_callback':
drivers/crypto/bcm/cipher.c:1679:31: warning:
variable 'areq' set but not used [-Wunused-but-set-variable]
drivers/crypto/bcm/cipher.c:1678:22: warning:
variable 'ctx' set but not used [-Wunused-but-set-variable]
Fixes:
9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Tue, 15 Jan 2019 07:19:00 +0000 (16:19 +0900)]
kbuild: mark prepare0 as PHONY to fix external module build
[ Upstream commit
e00d8880481497474792d28c14479a9fb6752046 ]
Commit
c3ff2a5193fa ("powerpc/32: add stack protector support")
caused kernel panic on PowerPC when an external module is used with
CONFIG_STACKPROTECTOR because the 'prepare' target was not executed
for the external module build.
Commit
e07db28eea38 ("kbuild: fix single target build for external
module") turned it into a build error because the 'prepare' target is
now executed but the 'prepare0' target is missing for the external
module build.
External module on arm/arm64 with CONFIG_STACKPROTECTOR_PER_TASK is
also broken in the same way.
Move 'PHONY += prepare0' to the common place. GNU Make is fine with
missing rule for phony targets. I also removed the comment which is
wrong irrespective of this commit.
I minimize the change so it can be easily backported to 4.20.x
To fix v4.20, please backport
e07db28eea38 ("kbuild: fix single target
build for external module"), and then this commit.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201891
Fixes:
e07db28eea38 ("kbuild: fix single target build for external module")
Fixes:
c3ff2a5193fa ("powerpc/32: add stack protector support")
Fixes:
189af4657186 ("ARM: smp: add support for per-task stack canaries")
Fixes:
0a1213fa7432 ("arm64: enable per-task stack canaries")
Cc: linux-stable <stable@vger.kernel.org> # v4.20
Reported-by: Samuel Holland <samuel@sholland.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pawe? Chmiel [Wed, 9 Jan 2019 18:00:41 +0000 (13:00 -0500)]
media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL
[ Upstream commit
19c624c6b29e244c418f8b44a711cbf5e82e3cd4 ]
This commit corrects max and step values for v4l2 control for
V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1.
It was found by using v4l2-compliance tool and checking result of
VIDIOC_QUERY_EXT_CTRL/QUERYMENU test.
Previously it was complaining that step was bigger than difference
between max and min.
Fixes:
15f4bc3b1f42 ("[media] s5p-jpeg: Add JPEG controls support")
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 14 Jan 2019 10:49:46 +0000 (13:49 +0300)]
drm/etnaviv: NULL vs IS_ERR() buf in etnaviv_core_dump()
[ Upstream commit
f8261c376e7f8cb9024af5a6c54be540c7f9108e ]
The etnaviv_gem_get_pages() never returns NULL. It returns error
pointers on error.
Fixes:
a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Osipenko [Wed, 12 Dec 2018 20:38:51 +0000 (23:38 +0300)]
memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
[ Upstream commit
be4dbdec2bab8635c7a41573668624ee13d83022 ]
This fixes irrelevant "tegra-mc
7000f000.memory-controller: no memory
timings for RAM code 0 registered" warning message during of kernels
boot-up on Tegra20.
Fixes:
a8d502fd3348 ("memory: tegra: Squash tegra20-mc into common tegra-mc driver")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Thu, 10 Jan 2019 19:22:26 +0000 (20:22 +0100)]
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031
[ Upstream commit
1d16073a326891c2a964e4cb95bc18fbcafb5f74 ]
So far genphy_soft_reset was used automatically if the PHY driver
didn't implement the soft_reset callback. This changed with the
mentioned commit and broke KSZ9031. To fix this configure the
KSZ9031 PHY driver to use genphy_soft_reset.
Fixes:
6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raju Rangoju [Fri, 11 Jan 2019 14:57:18 +0000 (20:27 +0530)]
RDMA/iw_cxgb4: Fix the unchecked ep dereference
[ Upstream commit
3352976c892301fd576a2e9ff0ac7337b2e2ca48 ]
The patch
944661dd97f4: "RDMA/iw_cxgb4: atomically lookup ep and get a
reference" from May 6, 2016, leads to the following Smatch complaint:
drivers/infiniband/hw/cxgb4/cm.c:2953 terminate()
error: we previously assumed 'ep' could be null (see line 2945)
Fixes:
944661dd97f4 ("RDMA/iw_cxgb4: atomically lookup ep and get a reference")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Fri, 4 Jan 2019 18:08:09 +0000 (18:08 +0000)]
spi: cadence: Correct initialisation of runtime PM
[ Upstream commit
734882a8bf984c2ac8a57d8ac3ee53230bd0bed8 ]
Currently the driver calls pm_runtime_put_autosuspend but without ever
having done a pm_runtime_get, this causes the reference count in the pm
runtime core to become -1. The bad reference count causes the core to
sometimes suspend whilst an active SPI transfer is in progress.
arizona spi0.1: SPI transfer timed out
spi_master spi0: failed to transfer one message from queue
The correct proceedure is to do all the initialisation that requires the
hardware to be powered up before enabling the PM runtime, then enable
the PM runtime having called pm_runtime_set_active to inform it that the
hardware is currently powered up. The core will then power it down at
it's leisure and no explicit pm_runtime_put is required.
Fixes:
d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Fri, 14 Dec 2018 11:01:02 +0000 (12:01 +0100)]
arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD
[ Upstream commit
af61bef513ba179559e56908b8c465e587bc3890 ]
In the same way as for msm8974-hammerhead, l11 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).
Tested on Dragonboard-410c and DART-SD410 boards.
Fixes:
4c7d53d16d77 (arm64: dts: apq8016-sbc: add regulators support)
Reported-by: Manabu Igusa <migusa@arrowjapan.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Mon, 17 Dec 2018 09:18:30 +0000 (17:18 +0800)]
drm/shmob: Fix return value check in shmob_drm_probe
[ Upstream commit
06c3bbd3c12737a50c2e981821b5585e1786e73d ]
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes:
8f1597c8f1a5 ("drm: shmobile: Perform initialization/cleanup at probe/remove time")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gal Pressman [Mon, 7 Jan 2019 15:27:56 +0000 (17:27 +0200)]
RDMA/qedr: Fix out of bounds index check in query pkey
[ Upstream commit
dbe30dae487e1a232158c24b432d45281c2805b7 ]
The pkey table size is QEDR_ROCE_PKEY_TABLE_LEN, index should be tested
for >= QEDR_ROCE_PKEY_TABLE_LEN instead of > QEDR_ROCE_PKEY_TABLE_LEN.
Fixes:
a7efd7773e31 ("qedr: Add support for PD,PKEY and CQ verbs")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gal Pressman [Mon, 7 Jan 2019 15:27:55 +0000 (17:27 +0200)]
RDMA/ocrdma: Fix out of bounds index check in query pkey
[ Upstream commit
b188940796c7be31c1b8c25a9a0e0842c2e7a49e ]
The pkey table size is one element, index should be tested for > 0 instead
of > 1.
Fixes:
fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gal Pressman [Mon, 7 Jan 2019 15:27:54 +0000 (17:27 +0200)]
IB/usnic: Fix out of bounds index check in query pkey
[ Upstream commit
4959d5da5737dd804255c75b8cea0a2929ce279a ]
The pkey table size is one element, index should be tested for > 0 instead
of > 1.
Fixes:
e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shakeel Butt [Tue, 8 Jan 2019 23:22:57 +0000 (15:22 -0800)]
fork, memcg: fix cached_stacks case
[ Upstream commit
ba4a45746c362b665e245c50b870615f02f34781 ]
Commit
5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on
memcg charge fail") fixes a crash caused due to failed memcg charge of
the kernel stack. However the fix misses the cached_stacks case which
this patch fixes. So, the same crash can happen if the memcg charge of
a cached stack is failed.
Link: http://lkml.kernel.org/r/20190102180145.57406-1-shakeelb@google.com
Fixes:
5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on memcg charge fail")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Noralf Trønnes [Sat, 5 Jan 2019 18:18:46 +0000 (19:18 +0100)]
drm/fb-helper: generic: Fix setup error path
[ Upstream commit
6e1490cf439aa86b104e5124c36275b964238e1f ]
If register_framebuffer() fails during fbdev setup we will leak the
framebuffer, the GEM buffer and the shadow buffer for defio. This is
because drm_fb_helper_fbdev_setup() just calls drm_fb_helper_fini() on
error not taking into account that register_framebuffer() can fail.
Since the generic emulation uses DRM client for its framebuffer and
backing buffer in addition to a shadow buffer, it's necessary to open code
drm_fb_helper_fbdev_setup() to properly handle the error path.
Error cleanup is removed from .fb_probe and is handled by one function for
all paths.
Fixes:
9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation")
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105181846.26495-1-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 13 Jul 2018 15:00:18 +0000 (18:00 +0300)]
drm/etnaviv: fix some off by one bugs
[ Upstream commit
f5fd9fd4000984f19db689282054953981a50534 ]
The ->nr_signal is the supposed to be the number of elements in the
->signal array. There was one place where it was 5 but it was supposed
to be 4. That looks like a copy and paste bug. There were also two
checks that were off by one.
Fixes:
9e2c2e273012 ("drm/etnaviv: add infrastructure to query perf counter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biju Das [Mon, 10 Dec 2018 11:57:57 +0000 (11:57 +0000)]
ARM: dts: r8a7743: Remove generic compatible string from iic3
[ Upstream commit
072b817589b17660ef19c31d89f7b981dbed3fd2 ]
The iic3 block on RZ/G1M does not support automatic transmission, unlike
other R-Car SoC's. So dropping the compatibility with the generic version.
Fixes:
f523405f2a22cc0c307 ("ARM: dts: r8a7743: Add IIC cores to dtsi")
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Sat, 29 Dec 2018 02:49:07 +0000 (10:49 +0800)]
drm: Fix error handling in drm_legacy_addctx
[ Upstream commit
c39191feed4540fed98badeb484833dcf659bb96 ]
'ctx->handle' is unsigned, it never less than zero.
This patch use int 'tmp_handle' to handle the err condition.
Fixes:
62968144e673 ("drm: convert drm context code to use Linux idr")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181229024907.12852-1-yuehaibing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sibi Sankar [Fri, 28 Dec 2018 18:53:05 +0000 (00:23 +0530)]
remoteproc: qcom: q6v5-mss: Add missing regulator for MSM8996
[ Upstream commit
47b874748d500020026ee43b386b5598e20f3a68 ]
Add proxy vote for pll supply on MSM8996 SoC.
Fixes:
9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc on msm8996")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sibi Sankar [Fri, 28 Dec 2018 18:53:03 +0000 (00:23 +0530)]
remoteproc: qcom: q6v5-mss: Add missing clocks for MSM8996
[ Upstream commit
80ec419c3404106c563aaf56aa6b516a59c4cdfb ]
Proxy vote for QDSS clock and remove vote on handover interrupt
to provide MSS PBL with access to STM hardware registers during
boot. Add "snoc_axi" and "mnoc_axi" to the active clock list.
Rename "gpll0_mss_clk" to "gpll0_mss" for consistency across SoCs.
Fixes:
9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc on msm8996")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Fri, 28 Dec 2018 16:53:23 +0000 (17:53 +0100)]
arm64: defconfig: Re-enable bcm2835-thermal driver
[ Upstream commit
4d9226fd9a0d747030575d7cb184b30c6e64f155 ]
The bcm2835-thermal driver was added with commit
ac178e4280e6
("ARM64: bcm2835: add thermal driver to default config"). Unfortunately
this was accidentally dropped by commit
eb1e6716cc9c
("arm64: defconfig: sync with savedefconfig"). So enable the driver again.
Fixes:
eb1e6716cc9c ("arm64: defconfig: sync with savedefconfig")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonas Gorski [Sun, 30 Dec 2018 11:55:09 +0000 (12:55 +0100)]
MIPS: BCM63XX: drop unused and broken DSP platform device
[ Upstream commit
682fee802843b332f9c51ffc8e062de5ff773f2e ]
Trying to register the DSP platform device results in a null pointer
access:
[ 0.124184] CPU 0 Unable to handle kernel paging request at virtual address
00000000, epc ==
804e305c, ra ==
804e6f20
[ 0.135208] Oops[#1]:
[ 0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87
...
[ 0.197117] epc :
804e305c bcm63xx_dsp_register+0x80/0xa4
[ 0.202838] ra :
804e6f20 board_register_devices+0x258/0x390
...
This happens because it tries to copy the passed platform data over the
platform_device's unpopulated platform_data.
Since this code has been broken since its submission, no driver was ever
submitted for it, and apparently nobody was using it, just remove it
instead of trying to fix it.
Fixes:
e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:50:13 +0000 (08:50 -0500)]
clk: dove: fix refcount leak in dove_clk_init()
[ Upstream commit
8d726c5128298386b907963033be93407b0c4275 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes:
8f7fc5450b64 ("clk: mvebu: dove: maintain clock init order")
Fixes:
63b8d92c793f ("clk: add Dove PLL divider support for GPU, VMeta and AXI clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:48:05 +0000 (08:48 -0500)]
clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()
[ Upstream commit
9b4eedf627045ae5ddcff60a484200cdd554c413 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes:
337072604224 ("clk: mvebu: Expand mv98dx3236-core-clock support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:42:26 +0000 (08:42 -0500)]
clk: armada-xp: fix refcount leak in axp_clk_init()
[ Upstream commit
db20a90a4b6745dad62753f8bd2f66afdd5abc84 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes:
0a11a6ae9437 ("clk: mvebu: armada-xp: maintain clock init order")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:40:19 +0000 (08:40 -0500)]
clk: kirkwood: fix refcount leak in kirkwood_clk_init()
[ Upstream commit
e7beeab9c61591cd0e690d8733d534c3f4278ff8 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes:
58d516ae95cb ("clk: mvebu: kirkwood: maintain clock init order")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:36:58 +0000 (08:36 -0500)]
clk: armada-370: fix refcount leak in a370_clk_init()
[ Upstream commit
a3c24050bdf70c958a8d98c2823b66ea761e6a31 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixes:
07ad6836fa21 ("clk: mvebu: armada-370: maintain clock init order")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:59:36 +0000 (08:59 -0500)]
clk: vf610: fix refcount leak in vf610_clocks_init()
[ Upstream commit
567177024e0313e4f0dcba7ba10c0732e50e655d ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
1f2c5fd5f048 ("ARM: imx: add VF610 clock support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:57:16 +0000 (08:57 -0500)]
clk: imx7d: fix refcount leak in imx7d_clocks_init()
[ Upstream commit
5f8c183a996b76bb09748073c856e4246fd4ce95 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
8f6d8094b215 ("ARM: imx: add imx7d clk tree support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:55:10 +0000 (08:55 -0500)]
clk: imx6sx: fix refcount leak in imx6sx_clocks_init()
[ Upstream commit
1731e14fb30212dd8c1e9f8fc1af061e56498c55 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
d55135689019 ("ARM: imx: add clock driver for imx6sx")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:53:00 +0000 (08:53 -0500)]
clk: imx6q: fix refcount leak in imx6q_clocks_init()
[ Upstream commit
c9ec1d8fef31b5fc9e90e99f9bd685db5caa7c5e ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
2acd1b6f889c ("ARM: i.MX6: implement clocks using common clock framework")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:32:15 +0000 (08:32 -0500)]
clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()
[ Upstream commit
cee82eb9532090cd1dc953e845d71f9b1445c84e ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
e062b571777f ("clk: exynos4: register clocks using common clock framework")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:29:02 +0000 (08:29 -0500)]
clk: socfpga: fix refcount leak
[ Upstream commit
7f9705beeb3759e69165e7aff588f6488ff6c1ac ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
5343325ff3dd ("clk: socfpga: add a clock driver for the Arria 10 platform")
Fixes:
a30d27ed739b ("clk: socfpga: fix clock driver for 3.15")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:21:31 +0000 (08:21 -0500)]
clk: ti: fix refcount leak in ti_dt_clocks_register()
[ Upstream commit
2274d8001fbb5e1942fbcab5ad2eb15553b09ed2 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
5b385a45e001 ("clk: ti: add support for clkctrl aliases")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:14:42 +0000 (08:14 -0500)]
clk: qoriq: fix refcount leak in clockgen_init()
[ Upstream commit
70af6c5b5270e8101f318c4b69cc98a726edfab9 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
0dfc86b3173f ("clk: qoriq: Move chip-specific knowledge into driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Wed, 26 Dec 2018 13:10:01 +0000 (08:10 -0500)]
clk: highbank: fix refcount leak in hb_clk_init()
[ Upstream commit
5eb8ba90958de1285120dae5d3a5d2b1a360b3b4 ]
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes:
26cae166cff9 ("ARM: highbank: remove custom .init_time hook")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rik van Riel [Fri, 21 Dec 2018 22:30:54 +0000 (14:30 -0800)]
fork,memcg: fix crash in free_thread_stack on memcg charge fail
[ Upstream commit
5eed6f1dff87bfb5e545935def3843edf42800f2 ]
Commit
9b6f7e163cd0 ("mm: rework memcg kernel stack accounting") will
result in fork failing if allocating a kernel stack for a task in
dup_task_struct exceeds the kernel memory allowance for that cgroup.
Unfortunately, it also results in a crash.
This is due to the code jumping to free_stack and calling
free_thread_stack when the memcg kernel stack charge fails, but without
tsk->stack pointing at the freshly allocated stack.
This in turn results in the vfree_atomic in free_thread_stack oopsing
with a backtrace like this:
#5 [
ffffc900244efc88] die at
ffffffff8101f0ab
#6 [
ffffc900244efcb8] do_general_protection at
ffffffff8101cb86
#7 [
ffffc900244efce0] general_protection at
ffffffff818ff082
[exception RIP: llist_add_batch+7]
RIP:
ffffffff8150d487 RSP:
ffffc900244efd98 RFLAGS:
00010282
RAX:
0000000000000000 RBX:
ffff88085ef55980 RCX:
0000000000000000
RDX:
ffff88085ef55980 RSI:
343834343531203a RDI:
343834343531203a
RBP:
ffffc900244efd98 R8:
0000000000000001 R9:
ffff8808578c3600
R10:
0000000000000000 R11:
0000000000000001 R12:
ffff88029f6c21c0
R13:
0000000000000286 R14:
ffff880147759b00 R15:
0000000000000000
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#8 [
ffffc900244efda0] vfree_atomic at
ffffffff811df2c7
#9 [
ffffc900244efdb8] copy_process at
ffffffff81086e37
#10 [
ffffc900244efe98] _do_fork at
ffffffff810884e0
#11 [
ffffc900244eff10] sys_vfork at
ffffffff810887ff
#12 [
ffffc900244eff20] do_syscall_64 at
ffffffff81002a43
RIP:
000000000049b948 RSP:
00007ffcdb307830 RFLAGS:
00000246
RAX:
ffffffffffffffda RBX:
0000000000896030 RCX:
000000000049b948
RDX:
0000000000000000 RSI:
00007ffcdb307790 RDI:
00000000005d7421
RBP:
000000000067370f R8:
00007ffcdb3077b0 R9:
000000000001ed00
R10:
0000000000000008 R11:
0000000000000246 R12:
0000000000000040
R13:
000000000000000f R14:
0000000000000000 R15:
000000000088d018
ORIG_RAX:
000000000000003a CS: 0033 SS: 002b
The simplest fix is to assign tsk->stack right where it is allocated.
Link: http://lkml.kernel.org/r/20181214231726.7ee4843c@imladris.surriel.com
Fixes:
9b6f7e163cd0 ("mm: rework memcg kernel stack accounting")
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 21 Dec 2018 08:38:30 +0000 (00:38 -0800)]
Input: nomadik-ske-keypad - fix a loop timeout test
[ Upstream commit
4d8f727b83bcd6702c2d210330872c9122d2d360 ]
The loop exits with "timeout" set to -1 not to 0.
Fixes:
1158f0f16224 ("Input: add support for Nomadik SKE keypad controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Machata [Tue, 18 Dec 2018 13:16:02 +0000 (13:16 +0000)]
vxlan: changelink: Fix handling of default remotes
[ Upstream commit
ce5e098f7a10b4bf8e948c12fa350320c5c3afad ]
Default remotes are stored as FDB entries with an Ethernet address of
00:00:00:00:00:00. When a request is made to change a remote address of
a VXLAN device, vxlan_changelink() first deletes the existing default
remote, and then creates a new FDB entry.
This works well as long as the list of default remotes matches exactly
the configuration of a VXLAN remote address. Thus when the VXLAN device
has a remote of X, there should be exactly one default remote FDB entry
X. If the VXLAN device has no remote address, there should be no such
entry.
Besides using "ip link set", it is possible to manipulate the list of
default remotes by using the "bridge fdb". It is therefore easy to break
the above condition. Under such circumstances, the __vxlan_fdb_delete()
call doesn't delete the FDB entry itself, but just one remote. The
following vxlan_fdb_create() then creates a new FDB entry, leading to a
situation where two entries exist for the address 00:00:00:00:00:00,
each with a different subset of default remotes.
An even more obvious breakage rooted in the same cause can be observed
when a remote address is configured for a VXLAN device that did not have
one before. In that case vxlan_changelink() doesn't remove any remote,
and just creates a new FDB entry for the new address:
$ ip link add name vx up type vxlan id 2000 dstport 4789
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent
$ ip link set dev vx type vxlan remote 192.0.2.30
$ bridge fdb sh dev vx | grep 00:00:00:00:00:00
00:00:00:00:00:00 dst 192.0.2.30 self permanent <- new entry, 1 rdst
00:00:00:00:00:00 dst 192.0.2.20 self permanent <- orig. entry, 2 rdsts
00:00:00:00:00:00 dst 192.0.2.30 self permanent
To fix this, instead of calling vxlan_fdb_create() directly, defer to
vxlan_fdb_update(). That has logic to handle the duplicates properly.
Additionally, it also handles notifications, so drop that call from
changelink as well.
Fixes:
0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huazhong Tan [Tue, 18 Dec 2018 11:37:48 +0000 (19:37 +0800)]
net: hns3: fix error handling int the hns3_get_vector_ring_chain
[ Upstream commit
cda69d244585bc4497d3bb878c22fe2b6ad647c1 ]
When hns3_get_vector_ring_chain() failed in the
hns3_nic_init_vector_data(), it should do the error handling instead
of return directly.
Also, cur_chain should be freed instead of chain and head->next should
be set to NULL in error handling of hns3_get_vector_ring_chain.
This patch fixes them.
Fixes:
73b907a083b8 ("net: hns3: bugfix for buffer not free problem during resetting")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 13 Dec 2018 13:32:34 +0000 (14:32 +0100)]
pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 value
[ Upstream commit
4d374bacd7c9665179f9752a52d5d602c45d8190 ]
The IP10[5:3] field in Peripheral Function Select Register 10 has a
width of 3 bits, i.e. it allows programming one out of 8 different
configurations.
However, 9 values are provided instead of 8, overflowing into the
subsequent field in the register, and thus breaking the configuration of
the latter.
Fix this by dropping a bogus zero value.
Fixes:
ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 13 Dec 2018 13:27:56 +0000 (14:27 +0100)]
pinctrl: sh-pfc: sh7269: Add missing PCIOR0 field
[ Upstream commit
9540cbdfcd861caf67a6f0e4bb7f46d41c4aad86 ]
The Port C I/O Register 0 contains 7 reserved bits, but the descriptor
contains only dummy configuration values for 6 reserved bits, thus
breaking the configuration of all subsequent fields in the register.
Fix this by adding the two missing configuration values.
Fixes:
f5e811f2a43117b2 ("sh-pfc: Add sh7269 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 13 Dec 2018 12:59:42 +0000 (13:59 +0100)]
pinctrl: sh-pfc: r8a77995: Remove bogus SEL_PWM[0-3]_3 configurations
[ Upstream commit
e28dc3f09c9d2555a9bd982f0847988591052226 ]
While the SEL_PWM[0-3] fields in the Module Select Register 0 support 4
possible configurations per PWM pin, only the first 3 are valid.
Replace the invalid and unused configurations for SEL_PWM[0-3]_3 by
dummies.
Fixes:
794a6711764658a1 ("pinctrl: sh-pfc: Initial R8A77995 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 13:42:16 +0000 (14:42 +0100)]
pinctrl: sh-pfc: sh7734: Add missing IPSR11 field
[ Upstream commit
94482af7055e1ffa211c1135256b85590ebcac99 ]
The Peripheral Function Select Register 11 contains 3 reserved bits and
15 variable-width fields, but the variable field descriptor does not
contain the 3-bit field IP11[25:23].
Fixes:
856cb4bb337ee504 ("sh: Add support pinmux for SH7734")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 13:36:54 +0000 (14:36 +0100)]
pinctrl: sh-pfc: r8a77980: Add missing MOD_SEL0 field
[ Upstream commit
b0f77269f6bba385f1f4dce44e7756cf8fbc0176 ]
The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12
single-bit fields, but the variable field descriptor lacks a field of 4
reserved bits.
Fixes:
f59125248a691dfe ("pinctrl: sh-pfc: Add R8A77980 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 13:29:02 +0000 (14:29 +0100)]
pinctrl: sh-pfc: r8a77970: Add missing MOD_SEL0 field
[ Upstream commit
67d7745bc78e16ec6b3af02bc1da6c8c868cbd89 ]
The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12
single-bit fields, but the variable field descriptor lacks a field of 4
reserved bits.
Fixes:
b92ac66a1819602b ("pinctrl: sh-pfc: Add R8A77970 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 13:21:16 +0000 (14:21 +0100)]
pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 field
[ Upstream commit
6a6c195d98a1a5e70faa87f594d7564af1dd1bed ]
The Peripheral Function Select Register 9 contains 12 fields, but the
variable field descriptor contains a 13th bogus field of 3 bits.
Fixes:
43c4436e2f1890a7 ("pinctrl: sh-pfc: add R8A7794 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 10:20:14 +0000 (11:20 +0100)]
pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group
[ Upstream commit
124cde98f856b6206b804acbdec3b7c80f8c3427 ]
The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the
tpu4_to3_pins[] array lacks the corresponding pin number.
Add the missing pin number, for non-GPIO pin F26.
Fixes:
5da4eb049de803c7 ("sh-pfc: sh73a0: Add TPU pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 10:12:20 +0000 (11:12 +0100)]
pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group
[ Upstream commit
0d6256cb880166a4111bebce35790019e56b6e1b ]
The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of
the color components. The vin1_b_data18_pins[] array rightfully does
not include the corresponding pin numbers, as RGB18 is subset of RGB24,
containing only the 6 MSB bits of each component.
Fixes:
8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 10:05:57 +0000 (11:05 +0100)]
pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group
[ Upstream commit
884fa25fb6e5e63ab970d612a628313bb68f37cc ]
The qspi_data4_b_mux[] array contains pin marks for the clock and chip
select pins. The qspi_data4_b_pins[] array rightfully does not contain
the corresponding pin numbers, as the control pins are provided by a
separate group (qspi_ctrl_b).
Fixes:
2d0c386f135e4186 ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 10:00:27 +0000 (11:00 +0100)]
pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group
[ Upstream commit
96bb2a6ab4eca10e5b6490b3f0738e9f7ec22c2b ]
The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers,
but the lcd0_data24_1_mux[] array lacks the corresponding pin marks.
Fixes:
06c7dd866da70f6c ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 12 Dec 2018 09:57:27 +0000 (10:57 +0100)]
pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group
[ Upstream commit
1ebc589a7786f17f97b9e87b44e0fb4d0290d8f8 ]
The gether_gmii_mux[] array contains the REF125CK pin mark, but the
gether_gmii_pins[] array lacks the corresponding pin number.
Fixes:
bae11d30d0cafdc5 ("sh-pfc: r8a7740: Add GETHER pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willem de Bruijn [Mon, 17 Dec 2018 17:23:59 +0000 (12:23 -0500)]
ipv6: add missing tx timestamping on IPPROTO_RAW
[ Upstream commit
fbfb2321e950918b430e7225546296b2dcadf725 ]
Raw sockets support tx timestamping, but one case is missing.
IPPROTO_RAW takes a separate packet construction path. raw_send_hdrinc
has an explicit call to sock_tx_timestamp, but rawv6_send_hdrinc does
not. Add it.
Fixes:
11878b40ed5c ("net-timestamp: SOCK_RAW and PING timestamping")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kelvin Cao [Mon, 10 Dec 2018 09:12:20 +0000 (17:12 +0800)]
switchtec: Remove immediate status check after submitting MRPC command
[ Upstream commit
526180408b815aa7b96fd48bd23cdd33ef04e38e ]
After submitting a Firmware Download MRPC command, Switchtec firmware will
delay Management EP BAR MemRd TLP responses by more than 10ms. This is a
firmware limitation. Delayed MemRd completions are a problem for systems
with a low Completion Timeout (CTO).
The current driver checks the MRPC status immediately after submitting an
MRPC command, which results in a delayed MemRd completion that may cause a
Completion Timeout.
Remove the immediate status check and rely on the check after receiving an
interrupt or timing out.
This is only a software workaround to the READ issue and a proper fix of
this should be done in firmware.
Fixes:
080b47def5e5 ("MicroSemi Switchtec management interface driver")
Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Thu, 6 Dec 2018 18:28:52 +0000 (19:28 +0100)]
staging: bcm2835-camera: fix module autoloading
[ Upstream commit
3a2c20024a2b47adbf514e7f3ab79342739c3926 ]
In order to make the module bcm2835-camera load automatically, we need to
add a module alias.
Fixes:
4bebb0312ea9 ("staging/bcm2835-camera: Set ourselves up as a platform driver.")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Thu, 6 Dec 2018 18:28:51 +0000 (19:28 +0100)]
staging: bcm2835-camera: Abort probe if there is no camera
[ Upstream commit
7566f39dfdc11f8a97d5810c6e6295a88f97ef91 ]
Abort the probing of the camera driver in case there isn't a camera
actually connected to the Raspberry Pi. This solution also avoids a
NULL ptr dereference of mmal instance on driver unload.
Fixes:
7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 3 Dec 2018 14:50:11 +0000 (17:50 +0300)]
mailbox: ti-msgmgr: Off by one in ti_msgmgr_of_xlate()
[ Upstream commit
78f3ff524fca63e7d2a57149a34ade23d2c12798 ]
The > comparison should be >= or we access one element beyond the end
of the array.
(The inst->qinsts[] array is allocated in the ti_msgmgr_probe() function
and it has ->num_valid_queues elements.)
Fixes:
a2b79838b891 ("mailbox: ti-msgmgr: Add support for Secure Proxy")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuval Shaia [Sun, 9 Dec 2018 13:53:49 +0000 (15:53 +0200)]
IB/rxe: Fix incorrect cache cleanup in error flow
[ Upstream commit
6db21d8986e14e2e86573a3b055b05296188bd2c ]
Array iterator stays at the same slot, fix it.
Fixes:
8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viresh Kumar [Tue, 11 Dec 2018 11:09:36 +0000 (16:39 +0530)]
OPP: Fix missing debugfs supply directory for OPPs
[ Upstream commit
46f48aca2e5aef3f430e95d1a5fb68227ec8ec85 ]
There is one case where we may end up with no "supply" directory for the
OPPs in debugfs. That happens when the OPP core isn't managing the
regulators for the device and the device's OPP do have microvolt
property. It happens because the opp_table->regulator_count remains set
to 0 and the debugfs routines don't add any supply directory in such a
case.
This commit fixes that by setting opp_table->regulator_count to 1 in
that particular case. But to make everything work nicely and not break
other parts of the core, regulator_count is defined as "int" now instead
of "unsigned int" and it can have different special values now. It is
set to -1 initially to mark it "uninitialized" and later only we set it
to 0 or positive values after checking how many supplies are there.
This also helps in finding the bugs where only few of the OPPs have the
"opp-microvolt" property set and not all.
Fixes:
1fae788ed640 ("PM / OPP: Don't create debugfs "supply-0" directory unnecessarily")
Reported-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mitko Haralanov [Wed, 28 Nov 2018 18:19:15 +0000 (10:19 -0800)]
IB/hfi1: Correctly process FECN and BECN in packets
[ Upstream commit
fe4dd4239277486ca3a468e7bbeafd7ef3a5634e ]
A CA is supposed to ignore FECN bits in multicast, ACK, and CNP
packets. This patch corrects the behavior of the HFI1 driver in this
regard by ignoring FECNs in those packet types.
While fixing the above behavior, fix the extraction of the FECN and BECN
bits from the packet headers for both 9B and 16B packets.
Furthermore, this patch corrects the driver's response to a FECN in RDMA
READ RESPONSE packets. Instead of sending an "empty" ACK, the driver now
sends a CNP packet. While editing that code path, add the missing trace
for CNP packets.
Fixes:
88733e3b8450 ("IB/hfi1: Add 16B UD support")
Fixes:
f59fb9e05109 ("IB/hfi1: Fix handling of FECN marked multicast packet")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yoshihiro Shimoda [Wed, 28 Nov 2018 09:02:41 +0000 (09:02 +0000)]
net: phy: Fix not to call phy_resume() if PHY is not attached
[ Upstream commit
ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]
This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.
Fixes:
803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 29 Nov 2018 10:34:35 +0000 (11:34 +0100)]
arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
[ Upstream commit
41e30b515a003a90e336b7a456c7c82d8c3aa6a7 ]
While commit
3b7e7848f0e88b36 ("arm64: dts: renesas: r8a7795: Add IPMMU
device nodes") for R-Car H3 ES2.0 did include power-domains properties,
they were forgotten in the counterpart for older R-Car H3 ES1.x SoCs.
Fixes:
e4b9a493df45075b ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neil Armstrong [Thu, 8 Nov 2018 13:24:38 +0000 (14:24 +0100)]
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
[ Upstream commit
e1f2163deac059ad39f07aba9e314ebe605d5a7a ]
The hdmi_5v regulator must be enabled to provide power to the physical HDMI
PHY and enables the HDMI 5V presence loopback for the monitor.
Fixes:
b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lyude Paul [Tue, 13 Nov 2018 22:46:14 +0000 (17:46 -0500)]
drm/dp_mst: Skip validating ports during destruction, just ref
[ Upstream commit
c54c7374ff44de5e609506aca7c0deae4703b6d1 ]
Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I
accidentally introduced into DRM two years ago.
Pretend we have a topology like this:
|- DP-1: mst_primary
|- DP-4: active display
|- DP-5: disconnected
|- DP-6: active hub
|- DP-7: active display
|- DP-8: disconnected
|- DP-9: disconnected
If we unplug DP-6, the topology starting at DP-7 will be destroyed but
it's payloads will live on in DP-1's VCPI allocations and thus require
removal. However, this removal currently fails because
drm_dp_update_payload_part1() will (rightly so) try to validate the port
before accessing it, fail then abort. If we keep going, eventually we
run the MST hub out of bandwidth and all new allocations will start to
fail (or in my case; all new displays just start flickering a ton).
We could just teach drm_dp_update_payload_part1() not to drop the port
ref in this case, but then we also need to teach
drm_dp_destroy_payload_step1() to do the same thing, then hope no one
ever adds anything to the that requires a validated port reference in
drm_dp_destroy_connector_work(). Kind of sketchy.
So let's go with a more clever solution: any port that
drm_dp_destroy_connector_work() interacts with is guaranteed to still
exist in memory until we say so. While said port might not be valid we
don't really care: that's the whole reason we're destroying it in the
first place! So, teach drm_dp_get_validated_port_ref() to use the all
mighty current_work() function to avoid attempting to validate ports
from the context of mgr->destroy_connector_work. I can't see any
situation where this wouldn't be safe, and this avoids having to play
whack-a-mole in the future of trying to work around port validation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
Reported-by: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113224613.28809-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willem de Bruijn [Sat, 24 Nov 2018 19:21:16 +0000 (14:21 -0500)]
net: always initialize pagedlen
[ Upstream commit
aba36930a35e7f1fe1319b203f25c05d6c119936 ]
In ip packet generation, pagedlen is initialized for each skb at the
start of the loop in __ip(6)_append_data, before label alloc_new_skb.
Depending on compiler options, code can be generated that jumps to
this label, triggering use of an an uninitialized variable.
In practice, at -O2, the generated code moves the initialization below
the label. But the code should not rely on that for correctness.
Fixes:
15e36f5b8e98 ("udp: paged allocation with gso")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Pinchart [Wed, 17 Oct 2018 19:08:31 +0000 (22:08 +0300)]
drm: rcar-du: Fix vblank initialization
[ Upstream commit
3d61fe5f59dd3e6f96fc0772156d257cb04dc656 ]
The drm_vblank_init() takes the total number of CRTCs as an argument,
but the rcar-du driver passes a bitmask of the CRTC indices. Fix it.
Fixes:
4bf8e1962f91 ("drm: Renesas R-Car Display Unit DRM driver")
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Tue, 16 Oct 2018 06:58:25 +0000 (08:58 +0200)]
drm: rcar-du: Fix the return value in case of error in 'rcar_du_crtc_set_crc_source()'
[ Upstream commit
4d486f18d91b1876040bf87e9ad78981a08b15a6 ]
We return 0 unconditionally in 'rcar_du_crtc_set_crc_source()'.
However, 'ret' is set to some error codes if some function calls fail.
Return 'ret' instead to propagate the error code.
Fixes:
47a52d024e89 ("media: drm: rcar-du: Add support for CRC computation")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Mon, 19 Nov 2018 03:32:41 +0000 (11:32 +0800)]
exportfs: fix 'passing zero to ERR_PTR()' warning
[ Upstream commit
909e22e05353a783c526829427e9a8de122fba9c ]
Fix a static code checker warning:
fs/exportfs/expfs.c:171 reconnect_one() warn: passing zero to 'ERR_PTR'
The error path for lookup_one_len_unlocked failure
should set err to PTR_ERR.
Fixes:
bbf7a8a3562f ("exportfs: move most of reconnect_path to helper function")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Thu, 15 Nov 2018 22:46:53 +0000 (14:46 -0800)]
bus: ti-sysc: Add mcasp optional clocks flag
[ Upstream commit
2c63a833e4500b341a62bf97e67488909ae12086 ]
We have OPT_CLKS_NEEDED in legacy platform data, but it's missing
from the ti-sysc driver for device tree based configuration.
In order to pass OPT_CLKS_NEEDED quirk flag we need to update omap4 module
data and add a new compatible for dra7 as the module layout is different
from sysc_regbits_omap4_mcasp.
Fixes:
70a65240efb1 ("bus: ti-sysc: Add register bits for interconnect
target modules")
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>