OSDN Git Service
Eric Laurent [Wed, 12 Jun 2013 15:44:42 +0000 (15:44 +0000)]
Merge "audioflinger: fix effects on direct output threads" into jb-mr2-dev
Eino-Ville Talvala [Tue, 11 Jun 2013 23:04:06 +0000 (16:04 -0700)]
Camera3: Skip no-op stream configurations.
If configuring the same set of streams more than once, don't actually
call into the HAL for the second and subsequent configure calls, since
they're no-ops.
This can speed up camera operation substantially if the
HAL implementation does not detect no-ops on its own and does a full
shutdown/restart on each configure call.
Bug:
9392513
Change-Id: I23baf4acbae2304735899adcf8e17565fa94d31d
Eric Laurent [Tue, 11 Jun 2013 21:38:48 +0000 (14:38 -0700)]
audioflinger: fix effects on direct output threads
PlaybackThread::addTrack_l() uses the assumption that
effects are attached to a track only if the track accumulation
buffer is different from the mixer thread output buffer.
This is not true for direct output threads where only one track is active
an only one buffer is needed.
This assumption is an optimization to avoid checking for effect chains with
the same session ID each time a track is processed. The optimization
is not key if only one track is attached to the thread which is the case for
direct outputs.
Current code fails to increment the active track count in the effect chain
on direct output threads when a track is started thus making the effect
framework clear the mix buffer and produce silence each time the mixer runs.
The fix consists in removing the optimization described above.
Bug:
9324989.
Change-Id: Id7a6337450ed90d326299c2ce9fc02f4b9e2fa6f
Zhijun He [Fri, 7 Jun 2013 16:58:12 +0000 (16:58 +0000)]
Merge "camera2/3: Fix deadlock take picture while preview callback" into jb-mr2-dev
Eric Laurent [Fri, 7 Jun 2013 15:52:59 +0000 (15:52 +0000)]
Merge "AudioFlinger: do not cache audio device when 0." into jb-mr2-dev
Eric Laurent [Fri, 7 Jun 2013 01:29:01 +0000 (18:29 -0700)]
AudioFlinger: do not cache audio device when 0.
AudioFlinger should not cache the audio device
passed to the audio HAL when it is AUDIO_DEVICE_NONE
but keep previous valid selection instead.
Bug:
9323399.
Change-Id: I6f9480e55a21be4115453e6a5eebc5cf2536c476
Zhijun He [Thu, 6 Jun 2013 23:52:02 +0000 (16:52 -0700)]
camera2/3: Fix deadlock take picture while preview callback
Acquiring mInputMutex before SharedParameters mutex in preview callback thread
causes circular locking dependency between callback thread and capture callback
thread.
Enforce the right lock ordering to break the dead lock.
Bug:
9323319
Change-Id: Iea2e025e4d9e29debcf74297c19930075017e179
Zhijun He [Thu, 6 Jun 2013 20:51:22 +0000 (13:51 -0700)]
camera3: Fix crash in set error state.
When camera open fails in camera3device initialize call, setErrorStateLockedV()
tries to access RequestThread object that is not created yet.
Bug:
9319518
Change-Id: Id5c6c0150ecaecb198045d5c6eb1b2ceebf5a727
Zhijun He [Thu, 6 Jun 2013 03:00:09 +0000 (20:00 -0700)]
camera2/3: Add protection to callback processing call
Callback stream in callbackprocessor could be delleted while process or
discard callback are ongoing, which leads CpuConsumer related call crash.
Bug
9303911
Change-Id: Ib6137e512208e5603468eba166640729b744e8f9
Eino-Ville Talvala [Tue, 4 Jun 2013 23:34:35 +0000 (16:34 -0700)]
Camera2/3: Move recording frame processing to its own thread.
Due to new deadlock opportunities from HAL3 integration, recording
frame processing needs to move out of the new frame handler into its
own thread in StreamingProcessor.
Bug:
9282913
Change-Id: I8d2926f2de9d0d395eef3c328c65caebbdbd2827
Eino-Ville Talvala [Tue, 4 Jun 2013 16:17:17 +0000 (16:17 +0000)]
Merge "Camera2/3: Don't trigger AF when in INFINITY focus mode." into jb-mr2-dev
Eino-Ville Talvala [Mon, 3 Jun 2013 23:50:53 +0000 (16:50 -0700)]
Camera2/3: Don't trigger AF when in INFINITY focus mode.
While the HAL should ignore it, it's faster to immediately respond
with success.
Also filter out cancel autofocus calls for FIXED/INFINITY focus.
Bug:
9263856
Change-Id: I637ec7c8b459d654ef11cb1142b959f2674224c5
Lajos Molnar [Mon, 3 Jun 2013 20:30:48 +0000 (20:30 +0000)]
Merge "stagefright: Fix port-reconfiguration & output-buffer-filled race condition" into jb-mr2-dev
Andreas Huber [Wed, 29 May 2013 21:20:52 +0000 (14:20 -0700)]
Update HTTP proxy configuration for all media playback inside stagefright.
Change-Id: Ie0dd00045aba668d8b49da73224e7a7c9c04f69b
related-to-bug:
8873723
(cherry picked from commit
2704965b8a1ff3b7450ff58ccecf86d8ec688c40)
Lajos Molnar [Fri, 26 Apr 2013 23:11:45 +0000 (16:11 -0700)]
stagefright: Fix port-reconfiguration & output-buffer-filled race condition
Remove the invalid assumption that when a port-reconfiguration event
is received, buffers cannot be downstream (waiting to be rendered).
Luckily, these buffers are properly handled (freed) after they are
sent to be rendered.
Change-Id: I1df39c1ffc2bfb96f8b7b4ee5be07cae654f956f
Signed-off-by: Lajos Molnar <lajos@google.com>
Bug:
8736466
Lajos Molnar [Wed, 29 May 2013 19:11:25 +0000 (19:11 +0000)]
Merge "MediaMuxer: Remove SAMPLE_FLAG_SYNC flag" into jb-mr2-dev
Igor Murashkin [Tue, 28 May 2013 23:47:00 +0000 (23:47 +0000)]
Merge "camera3: Don't try to disconnect stream native windows more than once" into jb-mr2-dev
Lajos Molnar [Tue, 28 May 2013 17:11:35 +0000 (10:11 -0700)]
MediaMuxer: Remove SAMPLE_FLAG_SYNC flag
MediaMuxer.writeSampleData() uses MediaCodec.BufferInfo
objects to specify the flags, so use directly the MediaCodec
flags. This is more intuitive and avoids users of the
MediaMuxer API having to create translations between
MediaMuxer's and MediaCodec's flag constants.
Change-Id: I18e12a6839ffb2c63da62516a4dc4c94e8bb3d17
Signed-off-by: Lajos Molnar <lajos@google.com>
Bug:
9169479
Igor Murashkin [Tue, 28 May 2013 22:31:39 +0000 (15:31 -0700)]
camera3: Don't try to disconnect stream native windows more than once
This fixes the multiple-disconnect-from-BufferQueue bug.
(In logs)
BufferQueue: [SurfaceView] disconnect: connected to another api (cur=0, req=4)
Bug:
9114681
Change-Id: I21ae1c5bd993701eea13648aa9994979a24eb210
Zhijun He [Fri, 24 May 2013 15:32:48 +0000 (15:32 +0000)]
Merge "Camera3: Fix the deadlock during recording pinch zooming" into jb-mr2-dev
Ed Heyl [Fri, 24 May 2013 05:15:23 +0000 (05:15 +0000)]
Merge "camera3: Disable ZSL for limited mode camera HALs" into jb-mr2-dev
Igor Murashkin [Thu, 23 May 2013 23:51:44 +0000 (16:51 -0700)]
camera3: Disable ZSL for limited mode camera HALs
Bug:
9111852
Change-Id: Idad7e0d2f912341bd643d0ad1a0861fb2043aa90
Igor Murashkin [Thu, 23 May 2013 20:42:32 +0000 (20:42 +0000)]
Merge "camera3: Fix zsl buffers released-while-in-use race condition" into jb-mr2-dev
Zhijun He [Wed, 22 May 2013 21:01:30 +0000 (14:01 -0700)]
Camera3: Fix the deadlock during recording pinch zooming
When zooming during recording, hal callback thread and request update thread run
into deadlock due to lock circular dependency. This change release lock during
queuebuffer in callback thread to break the dependency.
Bug:
9091576
Change-Id: Ia7b3f0ec17573cb32a5696dcde419ca28f42cfb8
Igor Murashkin [Thu, 23 May 2013 17:57:16 +0000 (17:57 +0000)]
Merge "Camera3: Make sure new metadata results signal other threads waiting" into jb-mr2-dev
Igor Murashkin [Wed, 22 May 2013 22:54:57 +0000 (15:54 -0700)]
camera3: Fix zsl buffers released-while-in-use race condition
Bug:
9007356
Change-Id: I0ced31020410978c549d408b2815f925e9c9ffcf
Igor Murashkin [Wed, 22 May 2013 19:54:28 +0000 (19:54 +0000)]
Merge "camera3: Fix recording failure when switching resolutions while preview on" into jb-mr2-dev
Mansoor Aftab [Wed, 22 May 2013 01:58:53 +0000 (18:58 -0700)]
Camera3: Fix Bug minTimestamp is never greater than frame timestamp
Bug in logic since minTimestamp is initialized to -1, and this needs
to be updated for the first frame atleast for logic to work correctly
for subsequent frames.
Bug:
9007356
Change-Id: I70edc4d9f34ff67a141c027c67396dc2ca9e413a
Signed-off-by: Igor Murashkin <iam@google.com>
Igor Murashkin [Tue, 21 May 2013 18:38:49 +0000 (11:38 -0700)]
camera3: Fix recording failure when switching resolutions while preview on
Bug:
9069574
Change-Id: Ife2ae5467f799dbe37e66714b3a6c9a51e1fe328
Igor Murashkin [Fri, 17 May 2013 21:39:53 +0000 (14:39 -0700)]
Camera3: Make sure new metadata results signal other threads waiting
- Also adds a lot of logging around shuffling around metadata frames
Bug:
9007356
Change-Id: I4285f4f55b4b899ea4928d43062c705619c8248a
Jamie Gennis [Tue, 21 May 2013 18:37:54 +0000 (18:37 +0000)]
Merge "Avoid a deadlock during EmptyBufferDone" into jb-mr2-dev
Andreas Huber [Mon, 20 May 2013 16:13:23 +0000 (09:13 -0700)]
Avoid a deadlock during EmptyBufferDone
The deadlock happens withen in the case where we use an OMX encoder with a
GraphicBufferSource.
Bug:
8329090
Change-Id: Icec58bb85ff3839ad1a2e3eca02fa9d6d133ca45
Zhijun He [Mon, 20 May 2013 18:18:39 +0000 (11:18 -0700)]
Camera2/3: Increase digital zoom steps
Digitial zoom number of steps was 30 and a bit rough. Change it to 100 to make
smooth zoom smoother.
Bug:
9050908
Change-Id: I141bc0335d58cdcd6530c14cbbfe6c4ffb4c6dc6
Mathias Agopian [Fri, 17 May 2013 17:15:07 +0000 (17:15 +0000)]
Merge "update to Fence::waitForever() API change" into jb-mr2-dev
Andy McFadden [Fri, 17 May 2013 16:48:14 +0000 (16:48 +0000)]
Merge "Adjust timestamp scale" into jb-mr2-dev
Mathias Agopian [Fri, 17 May 2013 01:07:35 +0000 (18:07 -0700)]
update to Fence::waitForever() API change
Bug:
8988871
Change-Id: I24a2620d356f3bb6207ed834c79fd3e48b429695
Andy McFadden [Wed, 15 May 2013 23:48:19 +0000 (16:48 -0700)]
Adjust timestamp scale
BufferQueue item timestamps are in nanoseconds, MediaCodec buffer
timestamps are in microseconds. Adjust.
Bug
8988357
Change-Id: Ib12824d7eea0316a14543c756e3a127c0866db6b
Chong Zhang [Thu, 16 May 2013 01:47:26 +0000 (18:47 -0700)]
wifi-display: retry UDP read/write to improve connection robustness
Bug:
8922753
Change-Id: Ie6d18f03afcb23d11e6f0e63403e8f0d59b70be8
Conley Owens [Wed, 15 May 2013 22:00:10 +0000 (15:00 -0700)]
Merge branch 'jb-mr1-dev-plus-aosp' into jb-mr2-dev
-s ours, so that jb-mr1-dev-plus-aosp can continue fastforwarding to
jb-mr2-dev.
Eino-Ville Talvala [Wed, 15 May 2013 15:58:27 +0000 (15:58 +0000)]
Merge "Camera3: Fix fast flexible YUV->NV21 path." into jb-mr2-dev
Chong Zhang [Wed, 15 May 2013 02:13:15 +0000 (02:13 +0000)]
Merge "wifi-display: misc fixes for M3 response parsing" into jb-mr2-dev
Eino-Ville Talvala [Tue, 14 May 2013 23:05:27 +0000 (16:05 -0700)]
Camera3: Fix fast flexible YUV->NV21 path.
A U by any other name may smell just as sweet, but the color's pretty
awful if you call it a V.
Henceforth they never will be UV.
Bug:
8949720
Change-Id: I4897e93d5a293e576bb1d7ba44d91792b869ad42
Igor Murashkin [Tue, 14 May 2013 23:17:12 +0000 (16:17 -0700)]
Camera: don't spam RingBufferConsumer logs in eng builds
Bug:
8969579
Change-Id: Ia51d4072725754fd3b6ca028232a605885376287
Conley Owens [Tue, 14 May 2013 18:03:59 +0000 (11:03 -0700)]
am
72c324ef: Empty test commit for AOSP
* commit '
72c324efd5a0f632d8f2b57b9f587a540d809b82':
Empty test commit for AOSP
Igor Murashkin [Tue, 14 May 2013 18:02:26 +0000 (18:02 +0000)]
Merge "Camera: Pause preview when needing to delete jpeg/zsl streams" into jb-mr2-dev
Conley Owens [Tue, 14 May 2013 17:14:40 +0000 (10:14 -0700)]
Empty test commit for AOSP
Eric Laurent [Tue, 14 May 2013 15:44:43 +0000 (15:44 +0000)]
Merge "Fix unreleased mutex in ToneGenerator stopTone()" into jb-mr2-dev
Igor Murashkin [Mon, 13 May 2013 21:53:44 +0000 (14:53 -0700)]
Camera: Pause preview when needing to delete jpeg/zsl streams
Bug:
8876221
Change-Id: Idf9490a48462fa44d49c4ebe99425c3149ae6378
Igor Murashkin [Mon, 13 May 2013 20:47:17 +0000 (20:47 +0000)]
Merge "Camera3: Refactor stream code to be DRY" into jb-mr2-dev
Eric Laurent [Mon, 13 May 2013 19:47:53 +0000 (12:47 -0700)]
Fix unreleased mutex in ToneGenerator stopTone()
Commit
09108ade introduced a regression by not releasing
the ToneGenerator mutex before exiting in case of error.
Bug:
8852855
Change-Id: I8ba2755b218842e2034ed8dbd54b18bf2a5fc571
Chong Zhang [Thu, 9 May 2013 08:27:59 +0000 (01:27 -0700)]
wifi-display: misc fixes for M3 response parsing
- fix wfd_video_format parsing w/ multiple H264-Codec
- fix handling of CRLF at end of M3 response
- fix missing wfd_client_rtp_ports
Bug:
8871667
Bug:
8875749
Change-Id: Idb0b5605313bba6ff067bcd765512bbed42e5202
Marco Nelissen [Sat, 11 May 2013 00:35:30 +0000 (00:35 +0000)]
Merge "Don't purge effects we're about to start using" into jb-mr2-dev
Marco Nelissen [Sat, 11 May 2013 00:34:58 +0000 (00:34 +0000)]
Merge "Don't render buffers that have size 0" into jb-mr2-dev
Eino-Ville Talvala [Fri, 10 May 2013 23:59:04 +0000 (23:59 +0000)]
Merge "Camera2/3: Optimize a few YCbCr_420_888 copy paths" into jb-mr2-dev
Alex Ray [Fri, 10 May 2013 20:07:33 +0000 (20:07 +0000)]
Merge "Camera2: FoV quirk crop regions" into jb-mr2-dev
Igor Murashkin [Thu, 9 May 2013 01:03:15 +0000 (18:03 -0700)]
Camera3: Refactor stream code to be DRY
Bug:
8851039
Change-Id: Iaac2926bfa25dd6e9db8b307765d4fe709b88d21
Marco Nelissen [Fri, 10 May 2013 17:10:42 +0000 (10:10 -0700)]
Don't purge effects we're about to start using
By acquiring the new session id before releasing the old, we prevent
purging existing effects with the new session id that aren't currently
attached but will be once the player is switched to the new session id.
b/
8767565
Change-Id: I703881b69c5accd8832ac834246925a20ada4c21
Marco Nelissen [Thu, 9 May 2013 16:15:34 +0000 (09:15 -0700)]
Don't render buffers that have size 0
b/
8857451
Change-Id: I12a31a2f85af76602db9e6f0ec80632954b3f7ed
Eino-Ville Talvala [Fri, 10 May 2013 00:03:54 +0000 (17:03 -0700)]
Camera3: Fix initial orientation configuration.
One call to set orientation too many.
Bug:
8683719
Change-Id: I4b776fc8665eed940a1f18a6f617be4f1406e41a
Eino-Ville Talvala [Thu, 9 May 2013 19:10:35 +0000 (12:10 -0700)]
Camera2/3: Optimize a few YCbCr_420_888 copy paths
Covers cases where the HAL format and the API format have the same
chroma layout.
Bug:
8734880
Change-Id: Ia735082c260b5914fc14f12551f91917c4e53b01
Igor Murashkin [Thu, 9 May 2013 19:01:31 +0000 (19:01 +0000)]
Merge "camera3: Manage fences properly when buffers are returned with an error" into jb-mr2-dev
Igor Murashkin [Thu, 9 May 2013 19:01:18 +0000 (19:01 +0000)]
Merge "camera2: Add height to the crop region metadata property" into jb-mr2-dev
Eino-Ville Talvala [Thu, 9 May 2013 17:13:44 +0000 (17:13 +0000)]
Merge "Camera3: Support flexible YUV for preview callbacks" into jb-mr2-dev
Igor Murashkin [Tue, 7 May 2013 17:58:13 +0000 (10:58 -0700)]
camera3: Manage fences properly when buffers are returned with an error
Bug:
8622089
Change-Id: I4df0258d6803d460d4dd98f0a80829eb844ca30d
Igor Murashkin [Tue, 7 May 2013 23:42:30 +0000 (23:42 +0000)]
Merge "Camera: Hotplug - conditionally transition to PRESENT when clients disconnect" into jb-mr2-dev
Alex Ray [Tue, 7 May 2013 21:31:02 +0000 (14:31 -0700)]
Camera2: FoV quirk crop regions
Bug:
8484377
Change-Id: I5ffcc20b68dc92b502acc9898e57f12cadb92848
Igor Murashkin [Tue, 7 May 2013 20:22:15 +0000 (13:22 -0700)]
camera2: Add height to the crop region metadata property
Bug:
8756080
Change-Id: I90b9166440e92f7675255a01ddc4a980c2e52201
Eino-Ville Talvala [Sun, 5 May 2013 01:24:30 +0000 (18:24 -0700)]
Camera3: Support flexible YUV for preview callbacks
When the HAL supports it, and the client asks for YV12 or NV21,
use the new flexible YUV format instead.
Bug:
8734880
Change-Id: Ib0129d9c26a6b30f3be7aa624c2439c6edba1bbd
Glenn Kasten [Mon, 6 May 2013 23:06:24 +0000 (16:06 -0700)]
Fix Audioflinger crash when TeeSink is enabled
Bug:
8834855
Change-Id: I54665f16d79901970348a8247d9a354da2990f42
Igor Murashkin [Mon, 6 May 2013 03:20:18 +0000 (03:20 +0000)]
Merge "camera: Use new camera_metadata structure validation functions" into jb-mr2-dev
Igor Murashkin [Mon, 6 May 2013 03:18:23 +0000 (03:18 +0000)]
Merge "camera3: Don't eagerly finish configuring bidi streams more than once" into jb-mr2-dev
Eric Laurent [Fri, 3 May 2013 15:39:52 +0000 (15:39 +0000)]
Merge "Remove timing jitter during startup of audio" into jb-mr2-dev
Igor Murashkin [Wed, 1 May 2013 22:42:20 +0000 (15:42 -0700)]
Camera: Hotplug - conditionally transition to PRESENT when clients disconnect
Fixes an issue where a client could unconditionally transition to PRESENT
after a client disconnects, even though the underlying HAL status was actually
NOT_PRESENT or ENUMERATING.
Bug:
8780114
Change-Id: I68adb5fc819eec3b046ddcb2507b84bedc999a0f
Igor Murashkin [Wed, 1 May 2013 01:18:06 +0000 (18:18 -0700)]
camera: Use new camera_metadata structure validation functions
* Reject unvalidated metadata across binder boundaries
* Sanity check in-process CameraMetadata when mutating data
Bug:
8713951
Change-Id: I121d8e15f8fdc9cdbbaf27dfd947813e11831e1c
Igor Murashkin [Thu, 2 May 2013 23:03:48 +0000 (23:03 +0000)]
Merge "camera3: Don't crash when taking a still capture with ZSL disabled" into jb-mr2-dev
Igor Murashkin [Thu, 2 May 2013 21:59:28 +0000 (14:59 -0700)]
camera3: Don't eagerly finish configuring bidi streams more than once
Finishing all stream configuration immediately is good, but when a stream is
both input and output it attempted to finish configuring bidi streams twice.
Since all ZSL streams are bidi, when we had a ZSL stream active preview would
immediately stop working.
Bug:
8563838
Change-Id: Iec998f11f6405fc15f3f31bd7cd29f03a7968d14
Andreas Huber [Mon, 29 Apr 2013 20:17:50 +0000 (13:17 -0700)]
A reference to the psi section data could become invalid if more
sections were added to the KeyedVector.
Change-Id: I095b5452ccfad89d69fc502fb21ce39495e201c3
related-to-bug:
8754565
Eino-Ville Talvala [Thu, 2 May 2013 21:17:44 +0000 (21:17 +0000)]
Merge "Camera2/3: Fix still image FOV reporting." into jb-mr2-dev
Andreas Huber [Thu, 2 May 2013 21:17:20 +0000 (21:17 +0000)]
Merge "The software FLAC encoder now properly signals an error if client" into jb-mr2-dev
Andreas Huber [Thu, 2 May 2013 21:16:23 +0000 (21:16 +0000)]
Merge "Don't even try to verify the native resolution validity a" into jb-mr2-dev
Andreas Huber [Thu, 2 May 2013 21:16:08 +0000 (21:16 +0000)]
Merge "Fix miracast source code to ignore the encoder output format change" into jb-mr2-dev
Igor Murashkin [Thu, 2 May 2013 18:53:00 +0000 (11:53 -0700)]
camera3: Don't crash when taking a still capture with ZSL disabled
Bug:
8790212
Change-Id: I4bf7ac5ab856b0ea1738844182efb86137e14083
Eric Laurent [Wed, 1 May 2013 23:53:44 +0000 (23:53 +0000)]
Merge "Fix reverb at 48kHz" into jb-mr2-dev
Eric Laurent [Wed, 1 May 2013 23:15:49 +0000 (16:15 -0700)]
Fix reverb at 48kHz
The LVM reverb wrapper had a test to only accept input
sampling rate of 44.1 kHz. As the LVM reberb engine
supports multiple sampling rate we can remove this test.
The fix for issue
8512027 (commit
2a9c5cd4) caused a regression
because the framework now checks the return code of the effect
configure command and ignores subsequent commands in case of error.
Bug:
8630044
Change-Id: I3146871f1ad8f7945a2e63ea763dd7b87368337d
Andreas Huber [Wed, 1 May 2013 23:03:28 +0000 (16:03 -0700)]
Fix miracast source code to ignore the encoder output format change
it doesn't care about.
Change-Id: Iec1594775a98b0c1aba662cc9f08652d2f8d4805
related-to-bug:
8616651
Eino-Ville Talvala [Mon, 29 Apr 2013 20:50:24 +0000 (13:50 -0700)]
Camera2/3: Fix still image FOV reporting.
Still FOV can vary as a function of the output sizes, with
the function depending on the HAL version.
Calculate and update the FOV whenever the output sizes might change.
Bug:
8484377
Change-Id: I56f2cc768a1e128a159b326588be55b2752db06e
Andreas Huber [Wed, 1 May 2013 21:47:29 +0000 (21:47 +0000)]
Merge "Support MediaCodec::getOutputFormat for encoders" into jb-mr2-dev
Andreas Huber [Wed, 1 May 2013 21:13:26 +0000 (14:13 -0700)]
Don't even try to verify the native resolution validity a
miracast sink advertises, even if it were valid we couldn't use it
since it's not consistently implemented by sinks.
Change-Id: Ibee6b3e23b5a55270fc3c419a581e2626530e3af
related-to-bug:
8772006
Andreas Huber [Wed, 1 May 2013 20:58:36 +0000 (13:58 -0700)]
The software FLAC encoder now properly signals an error if client
attempts to configure it with too large an input buffer size.
Previously this would lead to memory corruption during encoding due to a
typo.
Change-Id: I229b07b7dbe87fb8424419706671b66a8d58ec6b
related-to-bug:
8778893
Igor Murashkin [Wed, 1 May 2013 18:25:44 +0000 (18:25 +0000)]
Merge "Camera3: Add missing buffer listener include (for ZSL)" into jb-mr2-dev
Igor Murashkin [Wed, 1 May 2013 18:18:40 +0000 (11:18 -0700)]
Camera3: Add missing buffer listener include (for ZSL)
Bug:
8563838
Change-Id: Ie053655f5583d20003abdabccee68980d7cdcbfd
Igor Murashkin [Wed, 1 May 2013 17:48:57 +0000 (17:48 +0000)]
Merge changes I2feda142,I5a95e0be,Ia0c21ef0 into jb-mr2-dev
* changes:
Camera3: Add ZSL stream support
camera: Add new RingBufferConsumer to keep a ring buffer of acquired frames
Camera3: Add input stream support
Andreas Huber [Tue, 30 Apr 2013 23:08:47 +0000 (16:08 -0700)]
Support MediaCodec::getOutputFormat for encoders
codec specific data is provided as part of the MediaFormat if available.
Change-Id: I5a79c936e2411fe66ebc694791071faefc33941e
related-to-bug:
8616651
Igor Murashkin [Tue, 30 Apr 2013 20:06:15 +0000 (13:06 -0700)]
Camera: Don't complain repeatedly about missing android.led.availableLeds
Bug:
8765726
Change-Id: I78f5f98315068aaad3a39d56698b9c8a18cc8f4a
Igor Murashkin [Mon, 22 Apr 2013 21:03:54 +0000 (14:03 -0700)]
Camera3: Add ZSL stream support
Bug:
8563838
Change-Id: I2feda142ff5172aba17ade5c8d502f9bb5d5b766
Igor Murashkin [Mon, 29 Apr 2013 17:31:06 +0000 (10:31 -0700)]
camera: Add new RingBufferConsumer to keep a ring buffer of acquired frames
Bug:
8563838
Change-Id: I5a95e0be94e5388b30639905efae42d3c3279f72
Igor Murashkin [Sat, 27 Apr 2013 00:43:13 +0000 (00:43 +0000)]
Merge "ProCamera: Add security permission checks for disabling transmit LED" into jb-mr2-dev
Eino-Ville Talvala [Sat, 27 Apr 2013 00:10:38 +0000 (00:10 +0000)]
Merge "Camera2: Fix deadlock on shutdown due to client getting killed." into jb-mr2-dev
Igor Murashkin [Mon, 15 Apr 2013 21:59:22 +0000 (14:59 -0700)]
Camera3: Add input stream support
- Untested with actual CAMERA3_STREAM_INPUT streams.
Bug:
8629088
Change-Id: Ia0c21ef0a2c951e401ea8babd15d3cceb4bb25a1
Eino-Ville Talvala [Tue, 23 Apr 2013 22:16:57 +0000 (15:16 -0700)]
Camera2: Fix deadlock on shutdown due to client getting killed.
When the binder connection dies and is the only holder of a strong
pointer to the Camera2Client, disconnect is called from the
destructor. At this point, all weak pointers to Camera2Client are no
longer promotable, and lots of cleanup code paths are broken as a
result.
Rework all such code paths to not need the client pointer, and to
discard image buffers that arrive during shutdown.
Bug:
8696047
Change-Id: Ic0672ecde7c1baaf65079f925a45bd5be45f1fb3