OSDN Git Service
Cornelia Huck [Fri, 10 Jun 2016 09:04:11 +0000 (11:04 +0200)]
virtio-ccw: convert to ioeventfd callbacks
Use the new interface.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cornelia Huck [Fri, 10 Jun 2016 09:04:10 +0000 (11:04 +0200)]
virtio-bus: have callers tolerate new host notifier api
Have vhost and dataplane use the new api for transports that
have been converted.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cornelia Huck [Fri, 10 Jun 2016 09:04:09 +0000 (11:04 +0200)]
virtio-bus: common ioeventfd infrastructure
Introduce a set of ioeventfd callbacks on the virtio-bus level
that can be implemented by the individual transports. At the
virtio-bus level, do common handling for host notifiers (which
is actually most of it).
Two things of note:
- When setting the host notifier, we only switch from/to the
generic ioeventfd handler. This fixes a latent bug where we
had no ioeventfd assigned for a certain window.
- We always iterate over all possible virtio queues, even though
ccw (currently) has a lower limit. It does not really matter
here.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Thu, 16 Jun 2016 12:23:48 +0000 (14:23 +0200)]
pc: acpi: drop intermediate PCMachineState.node_cpu
PCMachineState.node_cpu was used for mapping APIC ID
to numa node id as CPU entries in SRAT used to be
built on sparse APIC ID bitmap (up to apic_id_limit).
However since commit
5803fce pc: acpi: SRAT: create only valid processor lapic entries
CPU entries in SRAT aren't build using apic bitmap
but using 0..maxcpus index instead which is also used
for creating numa_info[x].node_cpu map.
So instead of doing useless intermediate conversion from
1. node by cpu index -> node by apic id
i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu
2. apic id -> srat entry PMX
PCMachineState.node_cpu[apic id] -> PMX value
use numa_info[x].node_cpu map directly like ARM does and do
1. numa_info[x].node_cpu -> PMX value using index
in range 0..maxcpus
and drop not necessary PCMachineState.node_cpu and related
code.
That also removes the last (not counting legacy hotplug)
dependency of ACPI code on apic_id_limit and need to allocate
huge sparse PCMachineState.node_cpu array in case of 32-bit
APIC IDs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Fri, 24 Jun 2016 04:45:28 +0000 (07:45 +0300)]
acpi-test-data: update expected
switched to new cpu hotplug interface, aml changed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 15 Jun 2016 09:25:23 +0000 (11:25 +0200)]
pc: use new CPU hotplug interface since 2.7 machine type
For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.
While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Fri, 22 Apr 2016 17:06:36 +0000 (19:06 +0200)]
acpi: cpuhp: add cpu._OST handling
it adds HW and AML parts for CPU_Device._OST method
handling to allow OSPM reports status of hot-(un)plug
operation.
And extends QMP command query-acpi-ospm-status to report
CPU's OST info along with already reported PC-DIMM devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Tue, 14 Jun 2016 14:14:02 +0000 (16:14 +0200)]
acpi: cpuhp: implement hot-remove parts of CPU hotplug interface
it adds hw registers needed for handling CPU hot-remove and
corresponding AML methods to request and eject a CPU with
necessary hotplug callbacks in pc,piix4,ich9 code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Tue, 14 Jun 2016 14:13:32 +0000 (16:13 +0200)]
acpi: cpuhp: implement hot-add parts of CPU hotplug interface
it adds hw registers needed for handling CPU hot-add and
corresponding AML methods to handle hot-add events on
guest side.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 20 Apr 2016 09:28:57 +0000 (11:28 +0200)]
pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook
Add madt_cpu callback to AcpiDeviceIfClass and use
it for generating LAPIC MADT entries for CPUs.
Later it will be used for generating x2APIC
entries in case of more than 255 CPUs and also
would be reused by ARM target when ACPI CPU hotplug
is introduced there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Tue, 14 Jun 2016 14:02:06 +0000 (16:02 +0200)]
acpi: cpuhp: add CPU devices AML with _STA method
it adds CPU objects to DSDT with _STA method
and QEMU side of CPU hotplug interface initialization
with registers sufficient to handle _STA requests,
including necessary hotplug callbacks in piix4,ich9 code.
Hot-(un)plug hw/acpi parts will be added by
corresponding follow up patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 11 Apr 2016 15:25:54 +0000 (17:25 +0200)]
pc: piix4/ich9: add 'cpu-hotplug-legacy' property
It will be used to select which hotplug call-back is called
and for switching from legacy mode into new one.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 May 2016 09:42:59 +0000 (11:42 +0200)]
docs: update ACPI CPU hotplug spec with new protocol
Add description of new CPU hotplug interface.
To switch from from legacy mode into new mode use fact
that write accesses into CPU present bitmap were never
used before and were ignored by QEMU.
So use it to as a way to switch from legacy mode.
That way pc/q35 machine starts in legacy mode and
QEMU generated ACPI tables will switch to new CPU
hotplug interface during runtime.
In case QEMU is started with legacy BIOS (that doesn't
support QEMU generated ACPI tables), legacy CPU hotplug
will remain active and could be used by BIOS built in
ACPI tables for CPU hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ido Yariv [Sat, 18 Jun 2016 20:42:05 +0000 (16:42 -0400)]
i386: pci-assign: Fix MSI-X table size
The current code creates a whole page mmio region for the MSI-X table
size.
However, the page containing the MSI-X table may contain other registers
not related to MSI-X. Creating an mmio region for the whole page masks
such registers and may break drivers in the guest OS.
Since maximal number of entries is known, use that instead to deduce the
table size when setting up the mmio region.
Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:09 +0000 (20:22 +0800)]
docs: add NVDIMM ACPI documentation
It describes the basic concepts of NVDIMM ACPI and the interfaces
between QEMU and the ACPI BIOS
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:08 +0000 (20:22 +0800)]
nvdimm acpi: support Set Namespace Label Data function
Function 6 is used to set Namespace Label Data
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:07 +0000 (20:22 +0800)]
nvdimm acpi: support Get Namespace Label Data function
Function 5 is used to get Namespace Label Data
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:06 +0000 (20:22 +0800)]
nvdimm acpi: support Get Namespace Label Size function
Function 4 is used to get Namespace label size
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:05 +0000 (20:22 +0800)]
nvdimm acpi: check revision
Currently only revision 1 is supported
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:04 +0000 (20:22 +0800)]
nvdimm acpi: abstract the operations for root & nvdimm devices
It separates the operations between root device and nvdimm devices
in order to introducing label functions support for nvdimm device
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:03 +0000 (20:22 +0800)]
nvdimm acpi: check UUID
Check arg0 which indicates UUID to see if it is valid
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:02 +0000 (20:22 +0800)]
nvdimm acpi: save arg3 of _DSM method
Check if the input Arg3 is valid then store it into ARG3 if it is
needed
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:01 +0000 (20:22 +0800)]
nvdimm acpi: set HDLE properly
Now we pass HDLE to Qemu properly, use 0 for root device and use the
handle for nvdimm devices
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:22:00 +0000 (20:22 +0800)]
acpi: add aml_call5
It will be used by NVDIMM ACPI
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:21:59 +0000 (20:21 +0800)]
acpi: add aml_object_type
Implement ObjectType which is used by NVDIMM _DSM method in
later patch
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:21:58 +0000 (20:21 +0800)]
nvdimm: support nvdimm label
Introduce a parameter, 'label-size', which is the size of nvdimm label
data area which is reserved at the end of backend memory. It is required
at least 128k
Two callbacks, read_label_data() and write_label_data(), are used to
operate the label area
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiao Guangrong [Tue, 7 Jun 2016 12:21:57 +0000 (20:21 +0800)]
pc-dimm: introduce get_vmstate_memory_region callback
This callback returns the MemoryRegion that is the memory of dimm should
be kept during live migration
nvdimm device is different with pc-dimm as its memory includes not only
the MemoryRegion directly mapping to guest's address space but also the
memory used as label data
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Fri, 10 Jun 2016 09:15:43 +0000 (04:15 -0500)]
bios: Add tests for the IPMI ACPI and SMBIOS entries
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Fri, 10 Jun 2016 09:15:42 +0000 (04:15 -0500)]
acpi: Add IPMI table entries
Use the ACPI table construction tools to create an ACPI entry
for IPMI. This adds a function called build_acpi_ipmi_devices
to add an DSDT entry for IPMI if IPMI is compiled in and an
IPMI device exists. It also adds a dummy function if IPMI
is not compiled in.
This conforms to section "C3-2 Locating IPMI System Interfaces in
ACPI Name Space" in the IPMI 2.0 specification.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Fri, 10 Jun 2016 09:15:41 +0000 (04:15 -0500)]
ipmi: Add SMBIOS table entry
Add an IPMI table entry to the SMBIOS.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Fri, 10 Jun 2016 09:15:40 +0000 (04:15 -0500)]
smbios: Move table build tools into an include file.
This will let things in other files (like IPMI) build SMBIOS tables.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Thu, 23 Jun 2016 10:53:14 +0000 (11:53 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-
20160623' into staging
ppc patch queue for 2016-06-23
Currently outstanding patches for spapr, target-ppc and related
devices. This batch has:
* Significant new progress towards full support for hypervisor
mode
* Assorted bugfixes
* Some preliminary patches towards dynamic DMA window support
The last involves a change to memory.c, which Paolo has said I can
take through this tree.
# gpg: Signature made Thu 23 Jun 2016 06:47:53 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-
20160623:
ppc: Disable huge page support if it is not available for main RAM
ppc: Add P7/P8 Power Management instructions
ppc: Move exception generation code out of line
ppc: Turn a bunch of booleans from int to bool
ppc: Add real mode CI load/store instructions for P7 and P8
ppc: Rework generation of priv and inval interrupts
ppc: Fix generation if ISI/DSI vs. HV mode
ppc: Fix POWER7 and POWER8 exception definitions
ppc: fix exception model for HV mode
ppc: define a default LPCR value
ppc: Fix rfi/rfid/hrfi/... emulation
memory: Add reporting of supported page sizes
ppc: Improve emulation of THRM registers
target-ppc: Fix rlwimi, rlwinm, rlwnm again
ppc64: disable gen_pause() for linux-user mode
tests: Use '+=' to add additional tests, not '='
powerpc/mm: Update the WIMG check during H_ENTER
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 23 Jun 2016 10:18:57 +0000 (11:18 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-
20160622-2' into staging
usb: add hotplug support for usb-bot and usb-uas.
# gpg: Signature made Wed 22 Jun 2016 12:45:46 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/pull-usb-
20160622-2:
usb-uas: hotplug support
usb-bot: hotplug support
usb: Add QOM property "attached".
usb: make USBDevice->attached bool
usb-storage: qcow2 encryption support is finally gone, zap dead code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 23 Jun 2016 09:44:56 +0000 (10:44 +0100)]
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-
20160622-tag' into staging
xen-
20160622
# gpg: Signature made Wed 22 Jun 2016 12:45:56 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-
20160622-tag:
xen: move xen_sysdev to xen_backend.c
xen: fix qdisk BLKIF_OP_DISCARD for 32/64 word size mix
xen: fix style of hw/block/xen_blkif.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Wed, 22 Jun 2016 08:50:05 +0000 (10:50 +0200)]
ppc: Disable huge page support if it is not available for main RAM
On powerpc, we must only signal huge page support to the guest if
all memory areas are capable of supporting huge pages. The commit
2d103aae8765 ("fix hugepage support when using memory-backend-file")
already fixed the case when the user specified the mem-path property
for NUMA memory nodes instead of using the global "-mem-path" option.
However, there is one more case where it currently can go wrong.
When specifying additional memory DIMMs without using NUMA, e.g.
qemu-system-ppc64 -enable-kvm ... -m 1G,slots=2,maxmem=2G \
-device pc-dimm,id=dimm-mem1,memdev=mem1 -object \
memory-backend-file,policy=default,mem-path=/...,size=1G,id=mem1
the code in getrampagesize() currently assumes that huge pages
are possible since they are enabled for the mem1 object. But
since the main RAM is not backed by a huge page filesystem,
the guest Linux kernel then crashes very quickly after being
started. So in case the we've got "normal" memory without NUMA
and without the global "-mem-path" option, we must not announce
huge pages to the guest. Since this is likely a mis-configuration
by the user, also spill out a message in this case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:55 +0000 (23:48 +0200)]
ppc: Add P7/P8 Power Management instructions
This adds the ISA 2.06 and later power management instructions
(doze, nap, sleep and rvwinkle) and associated wakeup cause testing
in LPCR
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:54 +0000 (23:48 +0200)]
ppc: Move exception generation code out of line
There's no point inlining this, if you hit the exception case you exit
anyway, and not inlining saves about 100K of code size (and cache
footprint).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: removed '__attribute__((noinline))' from original patch ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:53 +0000 (23:48 +0200)]
ppc: Turn a bunch of booleans from int to bool
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:52 +0000 (23:48 +0200)]
ppc: Add real mode CI load/store instructions for P7 and P8
Those instructions are only available in hypervisor real mode and
allow cache inhibited garded access to devices in that mode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:51 +0000 (23:48 +0200)]
ppc: Rework generation of priv and inval interrupts
Recent server processors use the Hypervisor Emulation Assistance
interrupt for illegal instructions and *some* type of SPR accesses.
Also the code was always generating inval instructions even for priv
violations due to setting the wrong flags
Finally, the checking for PR/HV was open coded everywhere.
This reworks it all, using little helper macros for checking, and
adding the HV interrupt (which gets converted back to program check
in the slow path of excp_helper.c on CPUs that don't want it).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:50 +0000 (23:48 +0200)]
ppc: Fix generation if ISI/DSI vs. HV mode
Under some circumstances, we need to direct ISI and DSI interrupts
at the hypervisor, turning them into HISI/HDSI, and using different
SPRs (HDSISR and HDAR) depending on the combination of MSR_DR and
the corresponding VPM bits in LPCR.
This moves part of the code into helpers that are fixed to select
the right exception type and registers. On pre-P7 processors, LPCR
is 0 which provides the old behaviour of directing the interrupts
at the supervisor.
Thanks to Andrei Warkentin for finding a bug when HV=1
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: Merged a fix on POWERPC_EXCP_HDSI fixing the condition on
msr_hv, from Andrei Warkentin <andrey.warkentin@gmail.com> ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:49 +0000 (23:48 +0200)]
ppc: Fix POWER7 and POWER8 exception definitions
We were initializing unused ones and missing some
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:48 +0000 (23:48 +0200)]
ppc: fix exception model for HV mode
This properly implements LPES0 handling for HV vs. !HV mode and
removes the unsupported LPES1. This has been removed from the specs
since ISA v2.07.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: AIL implementation was fixed in commit
5c94b2a5e5ef. This patch
only contains the bits of the original patch related to LPES0
handling, adapted commit log.
fixed checkpatch.pl errors. ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:47 +0000 (23:48 +0200)]
ppc: define a default LPCR value
This allows us to set the appropriate LPCR bits which will be used
when fixing the exception model for the HV mode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: previous commit
26a7f1291bb5 did not include the LPCR setting as
it was not needed at the time, adapted commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Tue, 21 Jun 2016 21:48:46 +0000 (23:48 +0200)]
ppc: Fix rfi/rfid/hrfi/... emulation
This reworks emulation of the various "rfi" variants. I removed
some masking bits that I couldn't make sense of, the only bit that
I am aware we should mask here is POW, the CPU's MSR mask should
take care of the rest.
This also fixes some problems when running 32-bit userspace under
a 64-bit kernel.
This patch broke 32bit OpenBIOS when run under a 970 cpu. A fix was
proposed here :
https://www.coreboot.org/pipermail/openbios/2016-June/009452.html
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: updated the commit log with the reference of the openbios fix ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Remove hunk which disabled rfi on 64-bit CPUS. The change was
correct, but we need to fix OpenBIOS before applying it]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Gerd Hoffmann [Wed, 15 Jun 2016 09:46:59 +0000 (11:46 +0200)]
usb-uas: hotplug support
Make attached property settable and turns off auto-attach in case the
device was hotplugged. Hotplugging works simliar to usb-bot now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1465984019-28963-6-git-send-email-kraxel@redhat.com
Gerd Hoffmann [Wed, 15 Jun 2016 09:46:58 +0000 (11:46 +0200)]
usb-bot: hotplug support
This patch marks usb-bot as hot-pluggable device, makes attached
property settable and turns off auto-attach in case the device
was hotplugged.
Hot-plugging a usb-bot device with one or more scsi devices can be
done this way now:
(1) device-add usb-bot,id=foo
(2) device-add scsi-{hd,cd},bus=foo.0,lun=0
(2b) optionally add more devices (luns 0 ... 15).
(3) qom-set foo.attached = true
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1465984019-28963-5-git-send-email-kraxel@redhat.com
Gerd Hoffmann [Wed, 15 Jun 2016 09:46:57 +0000 (11:46 +0200)]
usb: Add QOM property "attached".
USB devices in attached state are visible to the guest. This patch adds
a QOM property for this. Write access is opt-in per device. Some
devices manage attached state automatically (usb-host, usb-serial,
usb-redir), so we can't enable write access universally but have to do
it on a case by case base. So far, no device opts in.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1465984019-28963-4-git-send-email-kraxel@redhat.com
[ minor codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 15 Jun 2016 09:46:56 +0000 (11:46 +0200)]
usb: make USBDevice->attached bool
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
1465984019-28963-3-git-send-email-kraxel@redhat.com
Gerd Hoffmann [Wed, 15 Jun 2016 09:46:55 +0000 (11:46 +0200)]
usb-storage: qcow2 encryption support is finally gone, zap dead code
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
1465984019-28963-2-git-send-email-kraxel@redhat.com
Juergen Gross [Mon, 13 Jun 2016 09:12:21 +0000 (11:12 +0200)]
xen: move xen_sysdev to xen_backend.c
Commit
9432e53a5bc88681b2d3aec4dac9db07c5476d1b added xen_sysdev as a
system device to serve as an anchor for removable virtual buses. This
introduced a build failure for non-x86 builds with CONFIG_XEN_BACKEND
set, as xen_sysdev was defined in a x86 specific file while being
consumed in an architecture independent source.
Move the xen_sysdev definition and initialization to xen_backend.c to
avoid the build failure.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Juergen Gross [Mon, 20 Jun 2016 07:55:43 +0000 (09:55 +0200)]
xen: fix qdisk BLKIF_OP_DISCARD for 32/64 word size mix
In case the word size of the domU and qemu running the qdisk backend
differ BLKIF_OP_DISCARD will not work reliably, as the request
structure in the ring have different layouts for different word size.
Correct this by copying the request structure in case of different
word size element by element in the BLKIF_OP_DISCARD case, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Juergen Gross [Mon, 20 Jun 2016 07:55:42 +0000 (09:55 +0200)]
xen: fix style of hw/block/xen_blkif.h
Fix hw/block/xen_blkif.h to match qemu coding style.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Alexey Kardashevskiy [Tue, 21 Jun 2016 01:14:01 +0000 (11:14 +1000)]
memory: Add reporting of supported page sizes
Every IOMMU has some granularity which MemoryRegionIOMMUOps::translate
uses when translating, however this information is not available outside
the translate context for various checks.
This adds a get_min_page_size callback to MemoryRegionIOMMUOps and
a wrapper for it so IOMMU users (such as VFIO) can know the minimum
actual page size supported by an IOMMU.
As IOMMU MR represents a guest IOMMU, this uses TARGET_PAGE_SIZE
as fallback.
This removes vfio_container_granularity() and uses new helper in
memory_region_iommu_replay() when replaying IOMMU mappings on added
IOMMU memory region.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[dwg: Removed an unnecessary calculation]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Benjamin Herrenschmidt [Mon, 20 Jun 2016 01:27:14 +0000 (11:27 +1000)]
ppc: Improve emulation of THRM registers
The 75x and 74xx processors have some thermal monitoring SPRs that
some OSes such as MacOS do use. Our current "dumb" implementation
isn't good enough and will cause some versions of MacOS to hang during
boot.
This lifts an improved emulation from MacOnLinux and adapts it to
qemu, thus fixing the problem.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Fixed typo in comment, a number of minor checkpatch warnings,
and a compile failure with CONFIG_USER_ONLY]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Richard Henderson [Mon, 20 Jun 2016 01:03:37 +0000 (11:03 +1000)]
target-ppc: Fix rlwimi, rlwinm, rlwnm again
In
63ae0915f8ec, I arranged to use a 32-bit rotate, without
considering the effect of a mask value that wraps around to
the high bits of the word.
[dwg: In
2e11b15 this was partially fixed, but an edge case was still
incorrect, which this fixes]
Signed-off-by: Richard Henderson <rth@twiddle.net>
[dwg: Folded with a revert of
2e11b15, an earlier buggy version of
this patch which already went upstream]
Tested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Laurent Vivier [Sun, 19 Jun 2016 19:19:24 +0000 (21:19 +0200)]
ppc64: disable gen_pause() for linux-user mode
While trying to install a fedora container with
"lxc-create -t fedora -- -I qemu-ppc64" the installation abort with
the following error:
qemu: fatal: Unknown exception 0x65537. Aborting
NIP
0000004000927924 LR
00000040009e325c CTR
0000004000927480 XER
0000000000000000 CPU#0
MSR
9000000102806000 HID0
0000000000000000 HF
9000000002806000 iidx 3 didx 3
TB
00248932 1069155773327487
GPR00
00000040009e325c 00000040007ff800 0000004000aba098 0000000000000000
GPR04
00000040007ff878 0000004000dcb588 0000004000dcb830 0000004000a7a098
GPR08
0000000000000000 0000000000000000 00000040007ff878 0000004000927960
GPR12
0000000022022448 0000004000e2aef0 0000000000000000 0000000000000000
GPR16
0000000000000000 0000000000000000 0000000000000002 0000000000000001
GPR20
0000000000000000 0000000000000000 0000000000000000 0000004000800699
GPR24
0000004000e13320 0000000000000000 0000004000ac9ad8 0000004000ac9ae0
GPR28
0000000000000001 00000000100210a0 0000000000000000 0000000000000038
CR
22022442 [ E E - E E G G E ] RES
ffffffffffffffff
FPR00
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR04
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR08
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR12
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR16
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR20
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR24
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR28
0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPSCR
0000000000000000
/usr/share/lxc/templates/lxc-fedora: line 487: 26661 Aborted (core dumped) chroot . yum -y --nogpgcheck --installroot /run/install install python rpm yum
I've bisected until the commit:
commit
b68e60e6f0d2865e961a800fb8db96a7fc6494c4
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue May 3 18:03:33 2016 +0200
ppc: Get out of emulation on SMT "OR" ops
Otherwise tight loops at smt_low for example, which OPAL does,
eat so much CPU that we can't boot a kernel anymore. With that,
I can boot 8 CPUs just fine with powernv.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can fix that by preventing to send EXCP_HLT in the case of linux-user mode,
as the main loop doesn't know how to manage it.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Fri, 17 Jun 2016 13:16:17 +0000 (15:16 +0200)]
tests: Use '+=' to add additional tests, not '='
The recent commit that added the prom-env-test accidentially
overwrote the check-qtest-ppc-y, check-qtest-ppc64-y and
check-qtest-sparc-y variables instead of extending them.
Fixes:
fcbf4a3c0c576eec1321f9cff4fa0dd8e0b1a82f
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Aneesh Kumar K.V [Fri, 17 Jun 2016 10:37:20 +0000 (16:07 +0530)]
powerpc/mm: Update the WIMG check during H_ENTER
Support for 0 value for memeory coherence is optional and with ppc64
we can always enable memory coherence. Linux kernel did that during
the development of 4.7 kernel. But that resulted in failure in Qemu
in H_ENTER hcall due to below check. The mentioned change was reverted
in the kernel and kernel right now enable memory coherence only if
cache inhibited is not set. Nevertheless update qemu WIMG flag check
to cover the case where we enable memory coherence along with cache
inhibited flag.
In order to handle older and newer kernel version consider both Cache
inhibitted and (cache inhibitted | memory conference) as valid values
for wimg flags.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell [Tue, 21 Jun 2016 14:19:58 +0000 (15:19 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-travis-
20160621-1' into staging
This pull request contains:
- disable sparse testing
- add trusty build target
- add libnfs-dev for NFS block driver
These are the same patches posted last week for any last minute review.
# gpg: Signature made Tue 21 Jun 2016 10:06:34 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-travis-
20160621-1:
.travis.yml: disable Sparse testing
.travis.yml: add trusty GCE target
.travis.yml: add libnfs-dev for NFS block driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Tue, 21 Jun 2016 10:11:51 +0000 (12:11 +0200)]
milkymist: fix tmu2.c build failure (missing error.h include)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 21 Jun 2016 09:36:16 +0000 (10:36 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Mon 20 Jun 2016 21:55:23 BST
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-signed:
MAINTAINERS: remove Blue Swirl as SPARC maintainer
MAINTAINERS: add Artyom Tarasenko as SPARC maintainer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 20 Jun 2016 21:30:34 +0000 (22:30 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Mon, 20 Jun 2016 20:55:16 +0000 (21:55 +0100)]
MAINTAINERS: remove Blue Swirl as SPARC maintainer
Blue is no longer active in the QEMU project, so remove him from the list of
SPARC maintainers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
Mark Cave-Ayland [Mon, 20 Jun 2016 20:55:16 +0000 (21:55 +0100)]
MAINTAINERS: add Artyom Tarasenko as SPARC maintainer
Artyom has been working on QEMU's SPARC emulation for several years, providing
initial support for Solaris under qemu-system-sparc and more recently bugfixes
for qemu-system-sparc64 and TCG patch reviews. As work progresses on improving
emulation for sun4u machines and beyond, Artyom has agreed to take on
co-maintainership of SPARC with a focus on 64-bit architecture.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Peter Maydell [Mon, 20 Jun 2016 17:14:26 +0000 (18:14 +0100)]
Merge remote-tracking branch 'remotes/mwalle/tags/lm32-queue/
20160620' into staging
lm32/milkymist: some qomifying
# gpg: Signature made Mon 20 Jun 2016 17:27:53 BST
# gpg: using RSA key 0xB458ABB0D8D378E3
# gpg: Good signature from "Michael Walle <michael@walle.cc>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2190 3E48 4537 A7C2 90CE 3EB2 B458 ABB0 D8D3 78E3
* remotes/mwalle/tags/lm32-queue/
20160620:
milkymist: update specification URLs
hw/intc: QOM'ify lm32_pic.c
hw/display: QOM'ify milkymist-vgafb.c
hw/display: QOM'ify milkymist-tmu2.c
hw/timer: QOM'ify milkymist_sysctl
hw/timer: QOM'ify lm32_timer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:26 +0000 (09:40 +0100)]
trace: split out trace events for linux-user/ directory
Move all trace-events for files in the linux-user/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id:
1466066426-16657-41-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:25 +0000 (09:40 +0100)]
trace: split out trace events for qom/ directory
Move all trace-events for files in the qom/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-40-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:24 +0000 (09:40 +0100)]
trace: split out trace events for target-ppc/ directory
Move all trace-events for files in the target-ppc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
1466066426-16657-39-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:23 +0000 (09:40 +0100)]
trace: split out trace events for target-s390x/ directory
Move all trace-events for files in the target-s390x/ directory to
their own file.
[Added missing newline in target-s390x/trace-events as suggested by
Cornelia Huck <cornelia.huck@de.ibm.com>.
--Stefan]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id:
1466066426-16657-38-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:22 +0000 (09:40 +0100)]
trace: split out trace events for target-sparc/ directory
Move all trace-events for files in the target-sparc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-37-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:21 +0000 (09:40 +0100)]
trace: split out trace events for net/ directory
Move all trace-events for files in the net/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-36-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:20 +0000 (09:40 +0100)]
trace: split out trace events for audio/ directory
Move all trace-events for files in the audio/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-35-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:19 +0000 (09:40 +0100)]
trace: split out trace events for ui/ directory
Move all trace-events for files in the ui/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-34-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:18 +0000 (09:40 +0100)]
trace: split out trace events for hw/alpha/ directory
Move all trace-events for files in the hw/alpha/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-33-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:17 +0000 (09:40 +0100)]
trace: split out trace events for hw/arm/ directory
Move all trace-events for files in the hw/arm/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-32-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:16 +0000 (09:40 +0100)]
trace: split out trace events for hw/acpi/ directory
Move all trace-events for files in the hw/acpi/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-31-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:15 +0000 (09:40 +0100)]
trace: split out trace events for hw/vfio/ directory
Move all trace-events for files in the hw/vfio/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-30-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:14 +0000 (09:40 +0100)]
trace: split out trace events for hw/s390x/ directory
Move all trace-events for files in the hw/s390x/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id:
1466066426-16657-29-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:13 +0000 (09:40 +0100)]
trace: split out trace events for hw/pci/ directory
Move all trace-events for files in the hw/pci/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-28-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:12 +0000 (09:40 +0100)]
trace: split out trace events for hw/ppc/ directory
Move all trace-events for files in the hw/ppc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
1466066426-16657-27-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:11 +0000 (09:40 +0100)]
trace: split out trace events for hw/9pfs/ directory
Move all trace-events for files in the hw/9pfs/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-26-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:10 +0000 (09:40 +0100)]
trace: split out trace events for hw/i386/ directory
Move all trace-events for files in the hw/i386/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-25-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:09 +0000 (09:40 +0100)]
trace: split out trace events for hw/isa/ directory
Move all trace-events for files in the hw/isa/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-24-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:08 +0000 (09:40 +0100)]
trace: split out trace events for hw/sd/ directory
Move all trace-events for files in the hw/sd/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-23-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:07 +0000 (09:40 +0100)]
trace: split out trace events for hw/sparc/ directory
Move all trace-events for files in the hw/sparc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-22-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:06 +0000 (09:40 +0100)]
trace: split out trace events for hw/dma/ directory
Move all trace-events for files in the hw/dma/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-21-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:05 +0000 (09:40 +0100)]
trace: split out trace events for hw/timer/ directory
Move all trace-events for files in the hw/timer/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-20-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:04 +0000 (09:40 +0100)]
trace: split out trace events for hw/input/ directory
Move all trace-events for files in the hw/input/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-19-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:03 +0000 (09:40 +0100)]
trace: split out trace events for hw/display/ directory
Move all trace-events for files in the hw/display/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-18-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:02 +0000 (09:40 +0100)]
trace: split out trace events for hw/nvram/ directory
Move all trace-events for files in the hw/nvram/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:01 +0000 (09:40 +0100)]
trace: split out trace events for hw/scsi/ directory
Move all trace-events for files in the hw/scsi/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-16-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:40:00 +0000 (09:40 +0100)]
trace: split out trace events for hw/usb/ directory
Move all trace-events for files in the hw/usb/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-15-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:39:59 +0000 (09:39 +0100)]
trace: split out trace events for hw/misc/ directory
Move all trace-events for files in the hw/misc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:39:58 +0000 (09:39 +0100)]
trace: split out trace events for hw/audio/ directory
Move all trace-events for files in the hw/audio/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-13-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:39:57 +0000 (09:39 +0100)]
trace: split out trace events for hw/virtio/ directory
Move all trace-events for files in the hw/virtio/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-12-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:39:56 +0000 (09:39 +0100)]
trace: split out trace events for hw/net/ directory
Move all trace-events for files in the hw/net/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-11-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:39:55 +0000 (09:39 +0100)]
trace: split out trace events for hw/intc/ directory
Move all trace-events for files in the hw/intc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-10-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:39:54 +0000 (09:39 +0100)]
trace: split out trace events for hw/char/ directory
Move all trace-events for files in the hw/char/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-9-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel P. Berrange [Thu, 16 Jun 2016 08:39:53 +0000 (09:39 +0100)]
trace: split out trace events for hw/block/ directory
Move all trace-events for files in the hw/block/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1466066426-16657-8-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>