OSDN Git Service
David S. Miller [Tue, 18 Feb 2020 23:44:13 +0000 (15:44 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This batch contains Netfilter fixes for net:
1) Restrict hashlimit size to
1048576, from Cong Wang.
2) Check for offload flags from nf_flow_table_offload_setup(),
this fixes a crash in case the hardware offload is disabled.
From Florian Westphal.
3) Three preparation patches to extend the conntrack clash resolution,
from Florian.
4) Extend clash resolution to deal with DNS packets from the same flow
racing to set up the NAT configuration.
5) Small documentation fix in pipapo, from Stefano Brivio.
6) Remove misleading unlikely() from pipapo_refill(), also from Stefano.
7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually
triggering another problem, still under discussion, another patch to
fix this will follow up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 14 Feb 2020 17:14:14 +0000 (18:14 +0100)]
netfilter: nft_set_pipapo: Don't abuse unlikely() in pipapo_refill()
I originally used unlikely() in the if (match_only) clause, which
we hit on the mapping table for the last field in a set, to ensure
we avoid branching to the rest of for loop body, which is executed
more frequently.
However, Pablo reports, this is confusing as it gives the impression
that this is not a common case, and it's actually not the intended
usage of unlikely().
I couldn't observe any statistical difference in matching rates on
x864_64 and aarch64 without it, so just drop it.
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes:
3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stefano Brivio [Fri, 14 Feb 2020 17:14:13 +0000 (18:14 +0100)]
netfilter: nft_set_pipapo: Fix mapping table example in comments
In both insertion and lookup examples, the two element pointers
of rule mapping tables were swapped. Fix that.
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes:
3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Madhuparna Bhowmik [Tue, 18 Feb 2020 19:58:20 +0000 (01:28 +0530)]
flow_table.c: Use built-in RCU list checking
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madhuparna Bhowmik [Tue, 18 Feb 2020 19:58:02 +0000 (01:28 +0530)]
datapath.c: Use built-in RCU list checking
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madhuparna Bhowmik [Tue, 18 Feb 2020 19:57:42 +0000 (01:27 +0530)]
vport.c: Use built-in RCU list checking
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madhuparna Bhowmik [Tue, 18 Feb 2020 19:54:25 +0000 (01:24 +0530)]
meter.c: Use built-in RCU list checking
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madhuparna Bhowmik [Tue, 18 Feb 2020 18:41:32 +0000 (00:11 +0530)]
netlabel_domainhash.c: Use built-in RCU list checking
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madhuparna Bhowmik [Tue, 18 Feb 2020 18:17:18 +0000 (23:47 +0530)]
net: netlabel: Use built-in RCU list checking
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Tue, 18 Feb 2020 17:15:44 +0000 (18:15 +0100)]
Revert "net: dev: introduce support for sch BYPASS for lockless qdisc"
This reverts commit
ba27b4cdaaa66561aaedb2101876e563738d36fe
Ahmed reported ouf-of-order issues bisected to commit
ba27b4cdaaa6
("net: dev: introduce support for sch BYPASS for lockless qdisc").
I can't find any working solution other than a plain revert.
This will introduce some minor performance regressions for
pfifo_fast qdisc. I plan to address them in net-next with more
indirect call wrapper boilerplate for qdiscs.
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes:
ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Neuschäfer [Tue, 18 Feb 2020 15:47:01 +0000 (16:47 +0100)]
net: phy: broadcom: Fix a typo ("firsly")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 17 Feb 2020 15:54:38 +0000 (16:54 +0100)]
mptcp: fix bogus socket flag values
Dan Carpenter reports static checker warnings due to bogus BIT() usage:
net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number
net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number
net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number
[..]
This is harmless (we use bits 1 & 2 instead of 0 and 1), but would
break eventually when adding BIT(5) (or 6, depends on size of 'long').
Just use 0 and 1, the values are only passed to test/set/clear_bit
functions.
Fixes:
648ef4b88673 ("mptcp: Implement MPTCP receive path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 17 Feb 2020 11:37:18 +0000 (13:37 +0200)]
qede: Fix race between rdma destroy workqueue and link change event
If an event is added while the rdma workqueue is being destroyed
it could lead to several races, list corruption, null pointer
dereference during queue_work or init_queue.
This fixes the race between the two flows which can occur during
shutdown.
A kref object and a completion object are added to the rdma_dev
structure, these are initialized before the workqueue is created.
The refcnt is used to indicate work is being added to the
workqueue and ensures the cleanup flow won't start while we're in
the middle of adding the event.
Once the work is added, the refcnt is decreased and the cleanup flow
is safe to run.
Fixes:
cee9fbd8e2e ("qede: Add qedr framework")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Mon, 17 Feb 2020 03:43:15 +0000 (11:43 +0800)]
selftests: forwarding: vxlan_bridge_1d: use more proper tos value
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes:
4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandre Belloni [Fri, 14 Feb 2020 14:32:24 +0000 (15:32 +0100)]
net: cnic: fix spelling mistake "reserverd" -> "reserved"
The reserved member should be named reserved3.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 18 Feb 2020 04:07:53 +0000 (12:07 +0800)]
sctp: move the format error check out of __sctp_sf_do_9_1_abort
When T2 timer is to be stopped, the asoc should also be deleted,
otherwise, there will be no chance to call sctp_association_free
and the asoc could last in memory forever.
However, in sctp_sf_shutdown_sent_abort(), after adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the
format error from __sctp_sf_do_9_1_abort() and miss adding
SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.
This patch is to fix it by moving the format error check out of
__sctp_sf_do_9_1_abort(), and do it before adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer.
Thanks Hangbin for reporting this issue by the fuzz testing.
v1->v2:
- improve the comment in the code as Marcelo's suggestion.
Fixes:
96ca468b86b0 ("sctp: check invalid value of length parameter in error cause")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Mon, 17 Feb 2020 20:38:09 +0000 (15:38 -0500)]
net: sched: correct flower port blocking
tc flower rules that are based on src or dst port blocking are sometimes
ineffective due to uninitialized stack data. __skb_flow_dissect() extracts
ports from the skb for tc flower to match against. However, the port
dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in
key_control->flags. All callers of __skb_flow_dissect(), zero-out the
key_control field except for fl_classify() as used by the flower
classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to
__skb_flow_dissect(), since key_control is allocated on the stack
and may not be initialized.
Since key_basic and key_control are present for all flow keys, let's
make sure they are initialized.
Fixes:
62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 17 Feb 2020 08:31:33 +0000 (09:31 +0100)]
net: mscc: fix in frame extraction
Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted
by reading chuncks of 4 bytes from a register.
In case the IFH and frames were read corretly it would try to read the next
frame. In case there are no more frames in the queue, it checks if there
were any previous errors and in that case clear the queue. But this check
will always succeed also when there are no errors. Because when extracting
the IFH the error is checked against 4(number of bytes read) and then the
error is set only if the extraction of the frame failed. So in a happy case
where there are no errors the err variable is still 4. So it could be
a case where after the check that there are no more frames in the queue, a
frame will arrive in the queue but because the error is not reseted, it
would try to flush the queue. So the frame will be lost.
The fix consist in resetting the error after reading the IFH.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 3 Feb 2020 16:37:07 +0000 (17:37 +0100)]
netfilter: conntrack: allow insertion of clashing entries
This patch further relaxes the need to drop an skb due to a clash with
an existing conntrack entry.
Current clash resolution handles the case where the clash occurs between
two identical entries (distinct nf_conn objects with same tuples), i.e.:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
... existing handling will discard the unconfirmed clashing entry and
makes skb->_nfct point to the existing one. The skb can then be
processed normally just as if the clash would not have existed in the
first place.
For other clashes, the skb needs to be dropped.
This frequently happens with DNS resolvers that send A and AAAA queries
back-to-back when NAT rules are present that cause packets to get
different DNAT transformations applied, for example:
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.6:5353
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.7:5353
In this case the A or AAAA query is dropped which incurs a costly
delay during name resolution.
This patch also allows this collision type:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.7:5353
In this case, clash is in original direction -- the reply direction
is still unique.
The change makes it so that when the 2nd colliding packet is received,
the clashing conntrack is tagged with new IPS_NAT_CLASH_BIT, gets a fixed
1 second timeout and is inserted in the reply direction only.
The entry is hidden from 'conntrack -L', it will time out quickly
and it can be early dropped because it will never progress to the
ASSURED state.
To avoid special-casing the delete code path to special case
the ORIGINAL hlist_nulls node, a new helper, "hlist_nulls_add_fake", is
added so hlist_nulls_del() will work.
Example:
CPU A: CPU B:
1. 10.2.3.4:42 -> 10.8.8.8:53 (A)
2. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
3. Apply DNAT, reply changed to 10.0.0.6
4. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
5. Apply DNAT, reply changed to 10.0.0.7
6. confirm/commit to conntrack table, no collisions
7. commit clashing entry
Reply comes in:
10.2.3.4:42 <- 10.0.0.6:5353 (A)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
10.2.3.4:42 <- 10.0.0.7:5353 (AAAA)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
The conntrack entry is deleted from table, as it has the NAT_CLASH
bit set.
In case of a retransmit from ORIGINAL dir, all further packets will get
the DNAT transformation to 10.0.0.6.
I tried to come up with other solutions but they all have worse
problems.
Alternatives considered were:
1. Confirm ct entries at allocation time, not in postrouting.
a. will cause uneccesarry work when the skb that creates the
conntrack is dropped by ruleset.
b. in case nat is applied, ct entry would need to be moved in
the table, which requires another spinlock pair to be taken.
c. breaks the 'unconfirmed entry is private to cpu' assumption:
we would need to guard all nfct->ext allocation requests with
ct->lock spinlock.
2. Make the unconfirmed list a hash table instead of a pcpu list.
Shares drawback c) of the first alternative.
3. Document this is expected and force users to rearrange their
ruleset (e.g. by using "-m cluster" instead of "-m statistics").
nft has the 'jhash' expression which can be used instead of 'numgen'.
Major drawback: doesn't fix what I consider a bug, not very realistic
and I believe its reasonable to have the existing rulesets to 'just
work'.
4. Document this is expected and force users to steer problematic
packets to the same CPU -- this would serialize the "allocate new
conntrack entry/nat table evaluation/perform nat/confirm entry", so
no race can occur. Similar drawback to 3.
Another advantage of this patch compared to 1) and 2) is that there are
no changes to the hot path; things are handled in the udp tracker and
the clash resolution path.
Cc: rcu@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Paul Cercueil [Sun, 16 Feb 2020 19:39:43 +0000 (16:39 -0300)]
net: ethernet: dm9000: Handle -EPROBE_DEFER in dm9000_parse_dt()
The call to of_get_mac_address() can return -EPROBE_DEFER, for instance
when the MAC address is read from a NVMEM driver that did not probe yet.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Sat, 15 Feb 2020 23:34:07 +0000 (15:34 -0800)]
skbuff.h: fix all kernel-doc warnings
Fix all kernel-doc warnings in <linux/skbuff.h>.
Fixes these warnings:
../include/linux/skbuff.h:890: warning: Function parameter or member 'list' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Sat, 15 Feb 2020 21:41:12 +0000 (13:41 -0800)]
skbuff: remove stale bit mask comments
Remove stale comments since this flag is no longer a bit mask
but is a bit field.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Sat, 15 Feb 2020 19:42:37 +0000 (11:42 -0800)]
net/sock.h: fix all kernel-doc warnings
Fix all kernel-doc warnings for <net/sock.h>.
Fixes these warnings:
../include/net/sock.h:232: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
../include/net/sock.h:498: warning: Function parameter or member 'sk_rx_skb_cache' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_tx_skb_cache' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_bpf_storage' not described in 'sock'
../include/net/sock.h:2024: warning: No description found for return value of 'sk_wmem_alloc_get'
../include/net/sock.h:2035: warning: No description found for return value of 'sk_rmem_alloc_get'
../include/net/sock.h:2046: warning: No description found for return value of 'sk_has_allocations'
../include/net/sock.h:2082: warning: No description found for return value of 'skwq_has_sleeper'
../include/net/sock.h:2244: warning: No description found for return value of 'sk_page_frag'
../include/net/sock.h:2444: warning: Function parameter or member 'tcp_rx_skb_cache_key' not described in 'DECLARE_STATIC_KEY_FALSE'
../include/net/sock.h:2444: warning: Excess function parameter 'sk' description in 'DECLARE_STATIC_KEY_FALSE'
../include/net/sock.h:2444: warning: Excess function parameter 'skb' description in 'DECLARE_STATIC_KEY_FALSE'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Sat, 15 Feb 2020 16:54:19 +0000 (17:54 +0100)]
net: ks8851-ml: Fix 16-bit IO operation
The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that
BE[3:0] signals are active high. This contradicts the measurements
of the behavior of the actual chip, where these signals behave as
active low. For example, to read the CIDER register, the bus must
expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Sat, 15 Feb 2020 16:54:18 +0000 (17:54 +0100)]
net: ks8851-ml: Fix 16-bit data access
The packet data written to and read from Micrel KSZ8851-16MLLI must be
byte-swapped in 16-bit mode, add this byte-swapping.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Sat, 15 Feb 2020 16:54:17 +0000 (17:54 +0100)]
net: ks8851-ml: Remove 8-bit bus accessors
This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown,
however the speculation is that this was some sort of attempt to support
the 8-bit bus mode.
As per the KS8851-16MLL documentation, all two registers accessed via the
8-bit accessors are internally 16-bit registers, so reading them using
16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read
outright, as it is already a concatenation of two 8-bit reads of that
register. The KS_RXQCR accesses are 8-bit only, however writing the top
8 bits of the register is OK as well, since the driver caches the entire
16-bit register value anyway.
Finally, the driver is not used by any hardware in the kernel right now.
The only hardware available to me is one with 16-bit bus, so I have no
way to test the 8-bit bus mode, however it is unlikely this ever really
worked anyway. If the 8-bit bus mode is ever required, it can be easily
added by adjusting the 16-bit accessors to do 2 consecutive accesses,
which is how this should have been done from the beginning.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Sat, 15 Feb 2020 14:45:56 +0000 (15:45 +0100)]
mptcp: select CRYPTO
Without this modification and if CRYPTO is not selected, we have this
warning:
WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- MPTCP [=y] && NET [=y] && INET [=y]
MPTCP selects CRYPTO_LIB_SHA256 which seems to depend on CRYPTO. CRYPTO
is now selected to avoid this issue.
Even though the config system prints that warning, it looks like
sha256.c is compiled and linked even without CONFIG_CRYPTO. Since MPTCP
will end up needing CONFIG_CRYPTO anyway in future commits -- currently
in preparation for net-next -- we propose to add it now to fix the
warning.
The dependency in the config system comes from the fact that
CRYPTO_LIB_SHA256 is defined in "lib/crypto/Kconfig" which is sourced
from "crypto/Kconfig" only if CRYPTO is selected.
Fixes:
65492c5a6ab5 (mptcp: move from sha1 (v0) to sha256 (v1))
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Feb 2020 03:32:11 +0000 (19:32 -0800)]
Merge branch 'bonding-fix-bonding-interface-bugs'
Taehee Yoo says:
====================
bonding: fix bonding interface bugs
This patchset fixes lockdep problem in bonding interface
1. The first patch is to add missing netdev_update_lockdep_key().
After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().
2. The second patch is to export netdev_next_lower_dev_rcu symbol.
netdev_next_lower_dev_rcu() is useful to implement the function,
which is to walk their all lower interfaces.
This patch is actually a preparing patch for the third patch.
3. The last patch is to fix lockdep waring in bond_get_stats().
The stats_lock uses a dynamic lockdep key.
So, after "nomaster" operation, updating the dynamic lockdep key
routine is needed. but it doesn't
So, lockdep warning occurs.
Change log:
v1 -> v2:
- Update headline from "fix bonding interface bugs"
to "bonding: fix bonding interface bugs"
- Drop a patch("bonding: do not collect slave's stats")
- Add new patches
- ("net: export netdev_next_lower_dev_rcu()")
- ("bonding: fix lockdep warning in bond_get_stats()")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sat, 15 Feb 2020 10:50:40 +0000 (10:50 +0000)]
bonding: fix lockdep warning in bond_get_stats()
In the "struct bonding", there is stats_lock.
This lock protects "bond_stats" in the "struct bonding".
bond_stats is updated in the bond_get_stats() and this function would be
executed concurrently. So, the lock is needed.
Bonding interfaces would be nested.
So, either stats_lock should use dynamic lockdep class key or stats_lock
should be used by spin_lock_nested(). In the current code, stats_lock is
using a dynamic lockdep class key.
But there is no updating stats_lock_key routine So, lockdep warning
will occur.
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ip link set bond0 master bond1
ip link set bond0 nomaster
ip link set bond1 master bond0
Splat looks like:
[ 38.420603][ T957] 5.5.0+ #394 Not tainted
[ 38.421074][ T957] ------------------------------------------------------
[ 38.421837][ T957] ip/957 is trying to acquire lock:
[ 38.422399][ T957]
ffff888063262cd8 (&bond->stats_lock_key#2){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[ 38.423528][ T957]
[ 38.423528][ T957] but task is already holding lock:
[ 38.424526][ T957]
ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[ 38.426075][ T957]
[ 38.426075][ T957] which lock already depends on the new lock.
[ 38.426075][ T957]
[ 38.428536][ T957]
[ 38.428536][ T957] the existing dependency chain (in reverse order) is:
[ 38.429475][ T957]
[ 38.429475][ T957] -> #1 (&bond->stats_lock_key){+.+.}:
[ 38.430273][ T957] _raw_spin_lock+0x30/0x70
[ 38.430812][ T957] bond_get_stats+0x90/0x4d0 [bonding]
[ 38.431451][ T957] dev_get_stats+0x1ec/0x270
[ 38.432088][ T957] bond_get_stats+0x1a5/0x4d0 [bonding]
[ 38.432767][ T957] dev_get_stats+0x1ec/0x270
[ 38.433322][ T957] rtnl_fill_stats+0x44/0xbe0
[ 38.433866][ T957] rtnl_fill_ifinfo+0xeb2/0x3720
[ 38.434474][ T957] rtmsg_ifinfo_build_skb+0xca/0x170
[ 38.435081][ T957] rtmsg_ifinfo_event.part.33+0x1b/0xb0
[ 38.436848][ T957] rtnetlink_event+0xcd/0x120
[ 38.437455][ T957] notifier_call_chain+0x90/0x160
[ 38.438067][ T957] netdev_change_features+0x74/0xa0
[ 38.438708][ T957] bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[ 38.439522][ T957] bond_enslave+0x3639/0x47b0 [bonding]
[ 38.440225][ T957] do_setlink+0xaab/0x2ef0
[ 38.440786][ T957] __rtnl_newlink+0x9c5/0x1270
[ 38.441463][ T957] rtnl_newlink+0x65/0x90
[ 38.442075][ T957] rtnetlink_rcv_msg+0x4a8/0x890
[ 38.442774][ T957] netlink_rcv_skb+0x121/0x350
[ 38.443451][ T957] netlink_unicast+0x42e/0x610
[ 38.444282][ T957] netlink_sendmsg+0x65a/0xb90
[ 38.444992][ T957] ____sys_sendmsg+0x5ce/0x7a0
[ 38.445679][ T957] ___sys_sendmsg+0x10f/0x1b0
[ 38.446365][ T957] __sys_sendmsg+0xc6/0x150
[ 38.447007][ T957] do_syscall_64+0x99/0x4f0
[ 38.447668][ T957] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 38.448538][ T957]
[ 38.448538][ T957] -> #0 (&bond->stats_lock_key#2){+.+.}:
[ 38.449554][ T957] __lock_acquire+0x2d8d/0x3de0
[ 38.450148][ T957] lock_acquire+0x164/0x3b0
[ 38.450711][ T957] _raw_spin_lock+0x30/0x70
[ 38.451292][ T957] bond_get_stats+0x90/0x4d0 [bonding]
[ 38.451950][ T957] dev_get_stats+0x1ec/0x270
[ 38.452425][ T957] bond_get_stats+0x1a5/0x4d0 [bonding]
[ 38.453362][ T957] dev_get_stats+0x1ec/0x270
[ 38.453825][ T957] rtnl_fill_stats+0x44/0xbe0
[ 38.454390][ T957] rtnl_fill_ifinfo+0xeb2/0x3720
[ 38.456257][ T957] rtmsg_ifinfo_build_skb+0xca/0x170
[ 38.456998][ T957] rtmsg_ifinfo_event.part.33+0x1b/0xb0
[ 38.459351][ T957] rtnetlink_event+0xcd/0x120
[ 38.460086][ T957] notifier_call_chain+0x90/0x160
[ 38.460829][ T957] netdev_change_features+0x74/0xa0
[ 38.461752][ T957] bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[ 38.462705][ T957] bond_enslave+0x3639/0x47b0 [bonding]
[ 38.463476][ T957] do_setlink+0xaab/0x2ef0
[ 38.464141][ T957] __rtnl_newlink+0x9c5/0x1270
[ 38.464897][ T957] rtnl_newlink+0x65/0x90
[ 38.465522][ T957] rtnetlink_rcv_msg+0x4a8/0x890
[ 38.466215][ T957] netlink_rcv_skb+0x121/0x350
[ 38.466895][ T957] netlink_unicast+0x42e/0x610
[ 38.467583][ T957] netlink_sendmsg+0x65a/0xb90
[ 38.468285][ T957] ____sys_sendmsg+0x5ce/0x7a0
[ 38.469202][ T957] ___sys_sendmsg+0x10f/0x1b0
[ 38.469884][ T957] __sys_sendmsg+0xc6/0x150
[ 38.470587][ T957] do_syscall_64+0x99/0x4f0
[ 38.471245][ T957] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 38.472093][ T957]
[ 38.472093][ T957] other info that might help us debug this:
[ 38.472093][ T957]
[ 38.473438][ T957] Possible unsafe locking scenario:
[ 38.473438][ T957]
[ 38.474898][ T957] CPU0 CPU1
[ 38.476234][ T957] ---- ----
[ 38.480171][ T957] lock(&bond->stats_lock_key);
[ 38.480808][ T957] lock(&bond->stats_lock_key#2);
[ 38.481791][ T957] lock(&bond->stats_lock_key);
[ 38.482754][ T957] lock(&bond->stats_lock_key#2);
[ 38.483416][ T957]
[ 38.483416][ T957] *** DEADLOCK ***
[ 38.483416][ T957]
[ 38.484505][ T957] 3 locks held by ip/957:
[ 38.485048][ T957] #0:
ffffffffbccf6230 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890
[ 38.486198][ T957] #1:
ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[ 38.487625][ T957] #2:
ffffffffbc9254c0 (rcu_read_lock){....}, at: bond_get_stats+0x5/0x4d0 [bonding]
[ 38.488897][ T957]
[ 38.488897][ T957] stack backtrace:
[ 38.489646][ T957] CPU: 1 PID: 957 Comm: ip Not tainted 5.5.0+ #394
[ 38.490497][ T957] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 38.492810][ T957] Call Trace:
[ 38.493219][ T957] dump_stack+0x96/0xdb
[ 38.493709][ T957] check_noncircular+0x371/0x450
[ 38.494344][ T957] ? lookup_address+0x60/0x60
[ 38.494923][ T957] ? print_circular_bug.isra.35+0x310/0x310
[ 38.495699][ T957] ? hlock_class+0x130/0x130
[ 38.496334][ T957] ? __lock_acquire+0x2d8d/0x3de0
[ 38.496979][ T957] __lock_acquire+0x2d8d/0x3de0
[ 38.497607][ T957] ? register_lock_class+0x14d0/0x14d0
[ 38.498333][ T957] ? check_chain_key+0x236/0x5d0
[ 38.499003][ T957] lock_acquire+0x164/0x3b0
[ 38.499800][ T957] ? bond_get_stats+0x90/0x4d0 [bonding]
[ 38.500706][ T957] _raw_spin_lock+0x30/0x70
[ 38.501435][ T957] ? bond_get_stats+0x90/0x4d0 [bonding]
[ 38.502311][ T957] bond_get_stats+0x90/0x4d0 [bonding]
[ ... ]
But, there is another problem.
The dynamic lockdep class key is protected by RTNL, but bond_get_stats()
would be called outside of RTNL.
So, it would use an invalid dynamic lockdep class key.
In order to fix this issue, stats_lock uses spin_lock_nested() instead of
a dynamic lockdep key.
The bond_get_stats() calls bond_get_lowest_level_rcu() to get the correct
nest level value, which will be used by spin_lock_nested().
The "dev->lower_level" indicates lower nest level value, but this value
is invalid outside of RTNL.
So, bond_get_lowest_level_rcu() returns valid lower nest level value in
the RCU critical section.
bond_get_lowest_level_rcu() will be work only when LOCKDEP is enabled.
Fixes:
089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sat, 15 Feb 2020 10:50:21 +0000 (10:50 +0000)]
net: export netdev_next_lower_dev_rcu()
netdev_next_lower_dev_rcu() will be used to implement a function,
which is to walk all lower interfaces.
There are already functions that they walk their lower interface.
(netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()).
But, there would be cases that couldn't be covered by given
netdev_walk_all_lower_dev_{rcu}() function.
So, some modules would want to implement own function,
which is to walk all lower interfaces.
In the next patch, netdev_next_lower_dev_rcu() will be used.
In addition, this patch removes two unused prototypes in netdevice.h.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sat, 15 Feb 2020 10:50:08 +0000 (10:50 +0000)]
bonding: add missing netdev_update_lockdep_key()
After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ifenslave bond0 bond1
ifenslave -d bond0 bond1
ifenslave bond1 bond0
Splat looks like:
[ 29.501182][ T1046] WARNING: possible circular locking dependency detected
[ 29.501945][ T1039] hardirqs last disabled at (1962): [<
ffffffffac6c807f>] handle_mm_fault+0x13f/0x700
[ 29.503442][ T1046] 5.5.0+ #322 Not tainted
[ 29.503447][ T1046] ------------------------------------------------------
[ 29.504277][ T1039] softirqs last enabled at (1180): [<
ffffffffade00678>] __do_softirq+0x678/0x981
[ 29.505443][ T1046] ifenslave/1046 is trying to acquire lock:
[ 29.505886][ T1039] softirqs last disabled at (1169): [<
ffffffffac19c18a>] irq_exit+0x17a/0x1a0
[ 29.509997][ T1046]
ffff88805d5da280 (&dev->addr_list_lock_key#3){+...}, at: dev_mc_sync_multiple+0x95/0x120
[ 29.511243][ T1046]
[ 29.511243][ T1046] but task is already holding lock:
[ 29.512192][ T1046]
ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[ 29.514124][ T1046]
[ 29.514124][ T1046] which lock already depends on the new lock.
[ 29.514124][ T1046]
[ 29.517297][ T1046]
[ 29.517297][ T1046] the existing dependency chain (in reverse order) is:
[ 29.518231][ T1046]
[ 29.518231][ T1046] -> #1 (&dev->addr_list_lock_key#4){+...}:
[ 29.519076][ T1046] _raw_spin_lock+0x30/0x70
[ 29.519588][ T1046] dev_mc_sync_multiple+0x95/0x120
[ 29.520208][ T1046] bond_enslave+0x448d/0x47b0 [bonding]
[ 29.520862][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding]
[ 29.521640][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding]
[ 29.522438][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding]
[ 29.523251][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[ 29.524082][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[ 29.524959][ T1046] kernfs_fop_write+0x276/0x410
[ 29.525620][ T1046] vfs_write+0x197/0x4a0
[ 29.526218][ T1046] ksys_write+0x141/0x1d0
[ 29.526818][ T1046] do_syscall_64+0x99/0x4f0
[ 29.527430][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 29.528265][ T1046]
[ 29.528265][ T1046] -> #0 (&dev->addr_list_lock_key#3){+...}:
[ 29.529272][ T1046] __lock_acquire+0x2d8d/0x3de0
[ 29.529935][ T1046] lock_acquire+0x164/0x3b0
[ 29.530638][ T1046] _raw_spin_lock+0x30/0x70
[ 29.531187][ T1046] dev_mc_sync_multiple+0x95/0x120
[ 29.531790][ T1046] bond_enslave+0x448d/0x47b0 [bonding]
[ 29.532451][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding]
[ 29.533163][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding]
[ 29.533789][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding]
[ 29.534595][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[ 29.535500][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[ 29.536379][ T1046] kernfs_fop_write+0x276/0x410
[ 29.537057][ T1046] vfs_write+0x197/0x4a0
[ 29.537640][ T1046] ksys_write+0x141/0x1d0
[ 29.538251][ T1046] do_syscall_64+0x99/0x4f0
[ 29.538870][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 29.539659][ T1046]
[ 29.539659][ T1046] other info that might help us debug this:
[ 29.539659][ T1046]
[ 29.540953][ T1046] Possible unsafe locking scenario:
[ 29.540953][ T1046]
[ 29.541883][ T1046] CPU0 CPU1
[ 29.542540][ T1046] ---- ----
[ 29.543209][ T1046] lock(&dev->addr_list_lock_key#4);
[ 29.543880][ T1046] lock(&dev->addr_list_lock_key#3);
[ 29.544873][ T1046] lock(&dev->addr_list_lock_key#4);
[ 29.545863][ T1046] lock(&dev->addr_list_lock_key#3);
[ 29.546525][ T1046]
[ 29.546525][ T1046] *** DEADLOCK ***
[ 29.546525][ T1046]
[ 29.547542][ T1046] 5 locks held by ifenslave/1046:
[ 29.548196][ T1046] #0:
ffff88806044c478 (sb_writers#5){.+.+}, at: vfs_write+0x3bb/0x4a0
[ 29.549248][ T1046] #1:
ffff88805af00890 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cf/0x410
[ 29.550343][ T1046] #2:
ffff88805b8b54b0 (kn->count#157){.+.+}, at: kernfs_fop_write+0x1f2/0x410
[ 29.551575][ T1046] #3:
ffffffffaecf4cf0 (rtnl_mutex){+.+.}, at: bond_opt_tryset_rtnl+0x5f/0xf0 [bonding]
[ 29.552819][ T1046] #4:
ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[ 29.554175][ T1046]
[ 29.554175][ T1046] stack backtrace:
[ 29.554907][ T1046] CPU: 0 PID: 1046 Comm: ifenslave Not tainted 5.5.0+ #322
[ 29.555854][ T1046] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 29.557064][ T1046] Call Trace:
[ 29.557504][ T1046] dump_stack+0x96/0xdb
[ 29.558054][ T1046] check_noncircular+0x371/0x450
[ 29.558723][ T1046] ? print_circular_bug.isra.35+0x310/0x310
[ 29.559486][ T1046] ? hlock_class+0x130/0x130
[ 29.560100][ T1046] ? __lock_acquire+0x2d8d/0x3de0
[ 29.560761][ T1046] __lock_acquire+0x2d8d/0x3de0
[ 29.561366][ T1046] ? register_lock_class+0x14d0/0x14d0
[ 29.562045][ T1046] ? find_held_lock+0x39/0x1d0
[ 29.562641][ T1046] lock_acquire+0x164/0x3b0
[ 29.563199][ T1046] ? dev_mc_sync_multiple+0x95/0x120
[ 29.563872][ T1046] _raw_spin_lock+0x30/0x70
[ 29.564464][ T1046] ? dev_mc_sync_multiple+0x95/0x120
[ 29.565146][ T1046] dev_mc_sync_multiple+0x95/0x120
[ 29.565793][ T1046] bond_enslave+0x448d/0x47b0 [bonding]
[ 29.566487][ T1046] ? bond_update_slave_arr+0x940/0x940 [bonding]
[ 29.567279][ T1046] ? bstr_printf+0xc20/0xc20
[ 29.567857][ T1046] ? stack_trace_consume_entry+0x160/0x160
[ 29.568614][ T1046] ? deactivate_slab.isra.77+0x2c5/0x800
[ 29.569320][ T1046] ? check_chain_key+0x236/0x5d0
[ 29.569939][ T1046] ? sscanf+0x93/0xc0
[ 29.570442][ T1046] ? vsscanf+0x1e20/0x1e20
[ 29.571003][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding]
[ ... ]
Fixes:
ab92d68fc22f ("net: core: add generic lockdep keys")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Sat, 15 Feb 2020 07:17:28 +0000 (08:17 +0100)]
NFC: pn544: Fix a typo in a debug message
The ending character of the string shoulb be \n, not \b.
Fixes:
17936b43f0fd ("NFC: Standardize logging style")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Sat, 15 Feb 2020 00:55:53 +0000 (01:55 +0100)]
ethtool: fix application of verbose no_mask bitset
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. This can
cause incorrect results like
lion:~ # ethtool eth0 | grep Wake
Supports Wake-on: pumbg
Wake-on: g
lion:~ # ethtool -s eth0 wol u
lion:~ # ethtool eth0 | grep Wake
Supports Wake-on: pumbg
Wake-on: ug
when the second ethtool command issues request
ETHTOOL_MSG_WOL_SET
ETHTOOL_A_WOL_HEADER
ETHTOOL_A_HEADER_DEV_NAME = "eth0"
ETHTOOL_A_WOL_MODES
ETHTOOL_A_BITSET_NOMASK
ETHTOOL_A_BITSET_BITS
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_BITSET_BIT_INDEX = 1
Fix the logic by clearing the whole target bitmap before we start iterating
through the request bits.
Fixes:
10b518d4e6dd ("ethtool: netlink bitset handling")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 14 Feb 2020 23:26:19 +0000 (15:26 -0800)]
net: dsa: b53: Ensure the default VID is untagged
We need to ensure that the default VID is untagged otherwise the switch
will be sending tagged frames and the results can be problematic. This
is especially true with b53 switches that use VID 0 as their default
VLAN since VID 0 has a special meaning.
Fixes:
fea83353177a ("net: dsa: b53: Fix default VLAN ID")
Fixes:
061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Feb 2020 03:21:56 +0000 (19:21 -0800)]
Merge branch 'wireguard-fixes'
Jason A. Donenfeld says:
====================
wireguard fixes for 5.6-rc2
Here are four fixes for wireguard collected since rc1:
1) Some small cleanups to the test suite to help massively parallel
builds.
2) A change in how we reset our load calculation to avoid a more
expensive comparison, suggested by Matt Dunwoodie.
3) I've been loading more and more of wireguard's surface into
syzkaller, trying to get our coverage as complete as possible,
leading in this case to a fix for mtu=0 devices.
4) A removal of superfluous code, pointed out by Eric Dumazet.
v2 fixes a logical problem in the patch for (3) pointed out by Eric Dumazet. v3
replaces some non-obvious bitmath in (3) with a more obvious expression, and
adds patch (4).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Fri, 14 Feb 2020 22:57:23 +0000 (23:57 +0100)]
wireguard: socket: remove extra call to synchronize_net
synchronize_net() is a wrapper around synchronize_rcu(), so there's no
point in having synchronize_net and synchronize_rcu back to back,
despite the documentation comment suggesting maybe it's somewhat useful,
"Wait for packets currently being received to be done." This commit
removes the extra call.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Fri, 14 Feb 2020 22:57:22 +0000 (23:57 +0100)]
wireguard: send: account for mtu=0 devices
It turns out there's an easy way to get packets queued up while still
having an MTU of zero, and that's via persistent keep alive. This commit
makes sure that in whatever condition, we don't wind up dividing by
zero. Note that an MTU of zero for a wireguard interface is something
quasi-valid, so I don't think the correct fix is to limit it via
min_mtu. This can be reproduced easily with:
ip link add wg0 type wireguard
ip link add wg1 type wireguard
ip link set wg0 up mtu 0
ip link set wg1 up
wg set wg0 private-key <(wg genkey)
wg set wg1 listen-port 1 private-key <(wg genkey) peer $(wg show wg0 public-key)
wg set wg0 peer $(wg show wg1 public-key) persistent-keepalive 1 endpoint 127.0.0.1:1
However, while min_mtu=0 seems fine, it makes sense to restrict the
max_mtu. This commit also restricts the maximum MTU to the greatest
number for which rounding up to the padding multiple won't overflow a
signed integer. Packets this large were always rejected anyway
eventually, due to checks deeper in, but it seems more sound not to even
let the administrator configure something that won't work anyway.
We use this opportunity to clean up this function a bit so that it's
clear which paths we're expecting.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Fri, 14 Feb 2020 22:57:21 +0000 (23:57 +0100)]
wireguard: receive: reset last_under_load to zero
This is a small optimization that prevents more expensive comparisons
from happening when they are no longer necessary, by clearing the
last_under_load variable whenever we wind up in a state where we were
under load but we no longer are.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Matt Dunwoodie <ncon@noconroy.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Fri, 14 Feb 2020 22:57:20 +0000 (23:57 +0100)]
wireguard: selftests: reduce complexity and fix make races
This gives us fewer dependencies and shortens build time, fixes up some
hash checking race conditions, and also fixes missing directory creation
that caused issues on massively parallel builds.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau [Fri, 14 Feb 2020 22:14:29 +0000 (14:14 -0800)]
mptcp: Protect subflow socket options before connection completes
Userspace should not be able to directly manipulate subflow socket
options before a connection is established since it is not yet known if
it will be an MPTCP subflow or a TCP fallback subflow. TCP fallback
subflows can be more directly controlled by userspace because they are
regular TCP connections, while MPTCP subflow sockets need to be
configured for the specific needs of MPTCP. Use the same logic as
sendmsg/recvmsg to ensure that socket option calls are only passed
through to known TCP fallback subflows.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Parameswaran [Fri, 14 Feb 2020 21:47:46 +0000 (13:47 -0800)]
net: phy: restore mdio regs in the iproc mdio driver
The mii management register in iproc mdio block
does not have a retention register so it is lost on suspend.
Save and restore value of register while resuming from suspend.
Fixes:
bb1a619735b4 ("net: phy: Initialize mdio clock at probe function")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 14 Feb 2020 15:53:53 +0000 (07:53 -0800)]
net: add strict checks in netdev_name_node_alt_destroy()
netdev_name_node_alt_destroy() does a lookup over all
device names of a namespace.
We need to make sure the name belongs to the device
of interest, and that we do not destroy its primary
name, since we rely on it being not deleted :
dev->name_node would indeed point to freed memory.
syzbot report was the following :
BUG: KASAN: use-after-free in dev_net include/linux/netdevice.h:2206 [inline]
BUG: KASAN: use-after-free in mld_force_mld_version net/ipv6/mcast.c:1172 [inline]
BUG: KASAN: use-after-free in mld_in_v2_mode_only net/ipv6/mcast.c:1180 [inline]
BUG: KASAN: use-after-free in mld_in_v1_mode+0x203/0x230 net/ipv6/mcast.c:1190
Read of size 8 at addr
ffff88809886c588 by task swapper/1/0
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
dev_net include/linux/netdevice.h:2206 [inline]
mld_force_mld_version net/ipv6/mcast.c:1172 [inline]
mld_in_v2_mode_only net/ipv6/mcast.c:1180 [inline]
mld_in_v1_mode+0x203/0x230 net/ipv6/mcast.c:1190
mld_send_initial_cr net/ipv6/mcast.c:2083 [inline]
mld_dad_timer_expire+0x24/0x230 net/ipv6/mcast.c:2118
call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786
__do_softirq+0x262/0x98c kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x19b/0x1e0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61
Code: 68 73 c5 f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 94 be 59 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 84 be 59 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 de 2a 74 f9 e8 09
RSP: 0018:
ffffc90000d3fd68 EFLAGS:
00000282 ORIG_RAX:
ffffffffffffff13
RAX:
1ffffffff136761a RBX:
ffff8880a99fc340 RCX:
0000000000000000
RDX:
dffffc0000000000 RSI:
0000000000000006 RDI:
ffff8880a99fcbd4
RBP:
ffffc90000d3fd98 R08:
ffff8880a99fc340 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
dffffc0000000000
R13:
ffffffff8aa5a1c0 R14:
0000000000000000 R15:
0000000000000001
arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:686
default_idle_call+0x84/0xb0 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361
start_secondary+0x2f4/0x410 arch/x86/kernel/smpboot.c:264
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242
Allocated by task 10229:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:515 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:488
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
__do_kmalloc_node mm/slab.c:3616 [inline]
__kmalloc_node+0x4e/0x70 mm/slab.c:3623
kmalloc_node include/linux/slab.h:578 [inline]
kvmalloc_node+0x68/0x100 mm/util.c:574
kvmalloc include/linux/mm.h:645 [inline]
kvzalloc include/linux/mm.h:653 [inline]
alloc_netdev_mqs+0x98/0xe40 net/core/dev.c:9797
rtnl_create_link+0x22d/0xaf0 net/core/rtnetlink.c:3047
__rtnl_newlink+0xf9f/0x1790 net/core/rtnetlink.c:3309
rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3377
rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
__sys_sendto+0x262/0x380 net/socket.c:1998
__do_compat_sys_socketcall net/compat.c:771 [inline]
__se_compat_sys_socketcall net/compat.c:719 [inline]
__ia32_compat_sys_socketcall+0x530/0x710 net/compat.c:719
do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline]
do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
Freed by task 10229:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:337 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:476
kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
__netdev_name_node_alt_destroy+0x1ff/0x2a0 net/core/dev.c:322
netdev_name_node_alt_destroy+0x57/0x80 net/core/dev.c:334
rtnl_alt_ifname net/core/rtnetlink.c:3518 [inline]
rtnl_linkprop.isra.0+0x575/0x6f0 net/core/rtnetlink.c:3567
rtnl_dellinkprop+0x46/0x60 net/core/rtnetlink.c:3588
rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__compat_sys_sendmsg net/compat.c:642 [inline]
__do_compat_sys_sendmsg net/compat.c:649 [inline]
__se_compat_sys_sendmsg net/compat.c:646 [inline]
__ia32_compat_sys_sendmsg+0x7a/0xb0 net/compat.c:646
do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline]
do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
The buggy address belongs to the object at
ffff88809886c000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1416 bytes inside of
4096-byte region [
ffff88809886c000,
ffff88809886d000)
The buggy address belongs to the page:
page:
ffffea0002621b00 refcount:1 mapcount:0 mapping:
ffff8880aa402000 index:0x0 compound_mapcount: 0
flags: 0xfffe0000010200(slab|head)
raw:
00fffe0000010200 ffffea0002610d08 ffffea0002607608 ffff8880aa402000
raw:
0000000000000000 ffff88809886c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88809886c480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88809886c500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff88809886c580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88809886c600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88809886c680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes:
36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Feb 2020 03:03:40 +0000 (19:03 -0800)]
Merge branch 'atlantic-fixes'
Igor Russkikh says:
====================
Marvell atlantic 2020/02 updates
Hi David, here is another set of bugfixes on AQC family found on
last integration phase.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 14 Feb 2020 15:44:58 +0000 (18:44 +0300)]
net: atlantic: fix out of range usage of active_vlans array
fix static checker warning:
drivers/net/ethernet/aquantia/atlantic/aq_filters.c:166 aq_check_approve_fvlan()
error: passing untrusted data to 'test_bit()'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
7975d2aff5af: ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Fri, 14 Feb 2020 15:44:57 +0000 (18:44 +0300)]
net: atlantic: possible fault in transition to hibernation
during hibernation freeze, aq_nic_stop could be invoked
on a stopped device. That may cause panic on access to
not yet allocated vector/ring structures.
Add a check to stop device if it is not yet stopped.
Similiarly after freeze in hibernation thaw, aq_nic_start
could be invoked on a not initialized net device.
Result will be the same.
Add a check to start device if it is initialized.
In our case, this is the same as started.
Fixes:
8aaa112a57c1 ("net: atlantic: refactoring pm logic")
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Fri, 14 Feb 2020 15:44:56 +0000 (18:44 +0300)]
net: atlantic: fix potential error handling
Code inspection found that in case of mapping error we do return current
'ret' value. But beside error, it is used to count number of descriptors
allocated for the packet. In that case map_skb function could return '1'.
Changing it to return zero (number of mapped descriptors for skb)
Fixes:
018423e90bee ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Fri, 14 Feb 2020 15:44:55 +0000 (18:44 +0300)]
net: atlantic: fix use after free kasan warn
skb->len is used to calculate statistics after xmit invocation.
Under a stress load it may happen that skb will be xmited,
rx interrupt will come and skb will be freed, all before xmit function
is even returned.
Eventually, skb->len will access unallocated area.
Moving stats calculation into tx_clean routine.
Fixes:
018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Danilov [Fri, 14 Feb 2020 15:44:54 +0000 (18:44 +0300)]
net: atlantic: better loopback mode handling
Add checks to not enable multiple loopback modes simultaneously,
It was also discovered that for dma loopback to function correctly
promisc mode should be enabled on device.
Fixes:
ea4b4d7fc106 ("net: atlantic: loopback tests via private flags")
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Egor Pomozov [Fri, 14 Feb 2020 15:44:53 +0000 (18:44 +0300)]
net: atlantic: ptp gpio adjustments
Clock adjustment data should be passed to FW as well, otherwise in some
cases a drift was observed when using GPIO features.
Signed-off-by: Egor Pomozov <epomozov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 14 Feb 2020 15:44:52 +0000 (18:44 +0300)]
net: atlantic: check rpc result and wait for rpc address
Artificial HW reliability tests revealed a possible hangup in
the driver. Normally, when device disappears from bus, all
register reads returns 0xFFFFFFFF.
At remote procedure invocation towards FW there is a logic
where result is compared with -1 in a loop.
That caused an infinite loop if hardware due to some issues
disappears from bus.
Add extra result checks to prevent this.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bezrukov [Fri, 14 Feb 2020 15:44:51 +0000 (18:44 +0300)]
net: atlantic: checksum compat issue
Yet another checksum offload compatibility issue was found.
The known issue is that AQC HW marks tcp packets with 0xFFFF checksum
as invalid (1). This is workarounded in driver, passing all the suspicious
packets up to the stack for further csum validation.
Another HW problem (2) is that it hides invalid csum of LRO aggregated
packets inside of the individual descriptors. That was workarounded
by forced scan of all LRO descriptors for checksum errors.
However the scan logic was joint for both LRO and multi-descriptor
packets (jumbos). And this causes the issue.
We have to drop LRO packets with the detected bad checksum
because of (2), but we have to pass jumbo packets to stack because of (1).
When using windows tcp partner with jumbo frames but with LSO disabled
driver discards such frames as bad checksummed. But only LRO frames
should be dropped, not jumbos.
On such a configurations tcp stream have a chance of drops and stucks.
(1)
76f254d4afe2 ("net: aquantia: tcp checksum 0xffff being handled incorrectly")
(2)
d08b9a0a3ebd ("net: aquantia: do not pass lro session with invalid tcp checksum")
Fixes:
d08b9a0a3ebd ("net: aquantia: do not pass lro session with invalid tcp checksum")
Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 13 Feb 2020 09:40:54 +0000 (17:40 +0800)]
selftests: forwarding: vxlan_bridge_1d: fix tos value
After commit
71130f29979c ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes:
d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 13 Feb 2020 04:58:26 +0000 (20:58 -0800)]
net: rtnetlink: fix bugs in rtnl_alt_ifname()
Since IFLA_ALT_IFNAME is an NLA_STRING, we have no
guarantee it is nul terminated.
We should use nla_strdup() instead of kstrdup(), since this
helper will make sure not accessing out-of-bounds data.
BUG: KMSAN: uninit-value in strlen+0x5e/0xa0 lib/string.c:535
CPU: 1 PID: 19157 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
strlen+0x5e/0xa0 lib/string.c:535
kstrdup+0x7f/0x1a0 mm/util.c:59
rtnl_alt_ifname net/core/rtnetlink.c:3495 [inline]
rtnl_linkprop+0x85d/0xc00 net/core/rtnetlink.c:3553
rtnl_newlinkprop+0x9d/0xb0 net/core/rtnetlink.c:3568
rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
___sys_sendmsg net/socket.c:2384 [inline]
__sys_sendmsg+0x451/0x5f0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45b3b9
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007ff1c7b1ac78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007ff1c7b1b6d4 RCX:
000000000045b3b9
RDX:
0000000000000000 RSI:
0000000020000040 RDI:
0000000000000003
RBP:
000000000075bf20 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000000009cb R14:
00000000004cb3dd R15:
000000000075bf2c
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
slab_alloc_node mm/slub.c:2774 [inline]
__kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
___sys_sendmsg net/socket.c:2384 [inline]
__sys_sendmsg+0x451/0x5f0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandre Belloni [Wed, 12 Feb 2020 16:45:38 +0000 (17:45 +0100)]
net: macb: ensure interface is not suspended on at91rm9200
Because of autosuspend, at91ether_start is called with clocks disabled.
Ensure that pm_runtime doesn't suspend the interface as soon as it is
opened as there is no pm_runtime support is the other relevant parts of the
platform support for at91rm9200.
Fixes:
d54f89af6cc4 ("net: macb: Add pm runtime support")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jethro Beekman [Wed, 12 Feb 2020 15:43:41 +0000 (16:43 +0100)]
net: fib_rules: Correctly set table field when table number exceeds 8 bits
In
709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to
allow legacy software to deal with routing table numbers >= 256, but the
same change to FIB rule queries was overlooked.
Signed-off-by: Jethro Beekman <jethro@fortanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Wed, 12 Feb 2020 03:03:55 +0000 (19:03 -0800)]
net/rds: Track user mapped pages through special API
Convert net/rds to use the newly introduces pin_user_pages() API,
which properly sets FOLL_PIN. Setting FOLL_PIN is now required for
code that requires tracking of pinned pages.
Note that this effectively changes the code's behavior: it now
ultimately calls set_page_dirty_lock(), instead of set_page_dirty().
This is probably more accurate.
As Christoph Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [1]
[1] https://lore.kernel.org/r/
20190723153640.GB720@lst.de
Cc: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Wed, 12 Feb 2020 01:41:07 +0000 (10:41 +0900)]
ipv6: Fix nlmsg_flags when splitting a multipath route
When splitting an RTA_MULTIPATH request into multiple routes and adding the
second and later components, we must not simply remove NLM_F_REPLACE but
instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink
message was malformed.
For example,
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \
nexthop via fe80::30:2 dev dummy0
results in the following warnings:
[ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE
[ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route
This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to
what it would get if the multipath route had been added in multiple netlink
operations:
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0
ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0
Fixes:
27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Wed, 12 Feb 2020 01:41:06 +0000 (10:41 +0900)]
ipv6: Fix route replacement with dev-only route
After commit
27596472473a ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.
Fixes:
27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Tue, 11 Feb 2020 07:32:56 +0000 (15:32 +0800)]
selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testing
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes:
ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 14 Feb 2020 20:40:38 +0000 (12:40 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew
Lunn.
2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen.
3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet.
4) Add some missing netlink attribute validation to matchall and
flower, from Davide Caratti.
5) Send icmp responses properly when NAT has been applied to the frame
before we get to the tunnel emitting the icmp, from Jason Donenfeld.
6) Make sure there is enough SKB headroom when adding dsa tags for qca
and ar9331. From Per Forlin.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
netdevice.h: fix all kernel-doc and Sphinx warnings
net: dsa: tag_ar9331: Make sure there is headroom for tag
net: dsa: tag_qca: Make sure there is headroom for tag
net, ip6_tunnel: enhance tunnel locate with link check
net/smc: no peer ID in CLC decline for SMCD
net/smc: transfer fasync_list in case of fallback
net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
net: hns3: fix VF bandwidth does not take effect in some case
net: hns3: add management table after IMP reset
mac80211: fix wrong 160/80+80 MHz setting
cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
xfrm: interface: use icmp_ndo_send helper
wireguard: device: use icmp_ndo_send helper
sunvnet: use icmp_ndo_send helper
gtp: use icmp_ndo_send helper
icmp: introduce helper for nat'd source address in network device context
net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
net/flow_dissector: remove unexist field description
page_pool: refill page when alloc.count of pool is zero
...
Linus Torvalds [Fri, 14 Feb 2020 20:34:30 +0000 (12:34 -0800)]
Merge tag 'pm-5.6-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix three issues related to the handling of wakeup events signaled
through the ACPI SCI while suspended to idle (Rafael Wysocki) and
unexport an internal cpufreq variable (Yangtao Li)"
* tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system
ACPICA: Introduce acpi_any_gpe_status_set()
ACPI: PM: s2idle: Avoid possible race related to the EC GPE
ACPI: EC: Fix flushing of pending work
cpufreq: Make cpufreq_global_kobject static
Linus Torvalds [Fri, 14 Feb 2020 20:27:54 +0000 (12:27 -0800)]
Merge tag 'sound-5.6-rc2' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only common change is the regression fix of the previous PCM fix
patch for managed buffers while the rest are usual suspects, USB-audio
and HD-audio device-specific quirks.
The change for UAC2 clock validation workaround became a bit big, but
the changes are fairly straightforward"
* tag 'sound-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix double hw_free calls
ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000
ALSA: hda/realtek - Fix silent output on MSI-GL73
ALSA: hda/realtek - Add more codec supported Headset Button
ALSA: usb-audio: Apply sample rate quirk for Audioengine D1
ALSA: usb-audio: Fix UAC2/3 effect unit parsing
ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headset
Linus Torvalds [Fri, 14 Feb 2020 20:23:16 +0000 (12:23 -0800)]
Merge tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"The core has a build fix for edid code on certain compilers/arches/,
one MST fix and one vgem fix. Regular amdgpu fixes, and a couple of
small driver fixes.
The i915 fixes are bit larger than normal for this stage, but they
were having CI issues last week, and they hadn't sent any fixes last
week due to this.
core:
- edid build fix
mst:
- fix NULL ptr deref
vgem:
- fix close after free
msm:
- better dma-api usage
sun4i:
- disable allow_fb_modifiers
amdgpu:
- Additional OD fixes for navi
- Misc display fixes
- VCN 2.5 DPG fix
- Prevent build errors on PowerPC on some configs
- GDS EDC fix
i915:
- dsi/acpi fixes
- gvt locking and allocation fixes
- gem/gt fixes
- bios timing parameters fix"
* tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm: (50 commits)
drm/i915: Mark the removal of the i915_request from the sched.link
drm/i915/execlists: Reclaim the hanging virtual request
drm/i915/execlists: Take a reference while capturing the guilty request
drm/i915/execlists: Offline error capture
drm/i915/gt: Allow temporary suspension of inflight requests
drm/i915: Keep track of request among the scheduling lists
drm/i915/gem: Tighten checks and acquiring the mmap object
drm/i915: Fix preallocated barrier list append
drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutex
drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release
drm/i915: Stub out i915_gpu_coredump_put
drm/amdgpu:/navi10: use the ODCAP enum to index the caps array
drm/amdgpu: update smu_v11_0_pptable.h
drm/amdgpu: correct comment to clear up the confusion
drm/amd/display: DCN2.x Do not program DPPCLK if same value
drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT
drm/amdgpu/vcn2.5: fix warning
drm/amdgpu: limit GDS clearing workaround in cold boot sequence
drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf
amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags
...
Randy Dunlap [Thu, 13 Feb 2020 06:28:20 +0000 (22:28 -0800)]
netdevice.h: fix all kernel-doc and Sphinx warnings
Eliminate all kernel-doc and Sphinx warnings in
<linux/netdevice.h>. Fixes these warnings:
../include/linux/netdevice.h:2100: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'name_assign_type' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'mpls_ptr' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_prog' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_bulkq' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'qdisc_hash' not described in 'net_device'
../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string.
../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 14 Feb 2020 15:34:51 +0000 (07:34 -0800)]
Merge branch 'dsa-headroom'
Per Forlin says:
====================
net: dsa: Make sure there is headroom for tag
Sorry for re-posting yet another time....
I manage to include multiple email-senders and forgot to include cover-letter.
Let's hope everyhthing is in order this time.
Fix two tag drivers to make sure there is headroom for the tag data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Per Forlin [Thu, 13 Feb 2020 14:37:10 +0000 (15:37 +0100)]
net: dsa: tag_ar9331: Make sure there is headroom for tag
Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.
Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Per Forlin [Thu, 13 Feb 2020 14:37:09 +0000 (15:37 +0100)]
net: dsa: tag_qca: Make sure there is headroom for tag
Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.
Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Dauchy [Thu, 13 Feb 2020 17:19:22 +0000 (18:19 +0100)]
net, ip6_tunnel: enhance tunnel locate with link check
With ipip, it is possible to create an extra interface explicitly
attached to a given physical interface:
# ip link show tunl0
4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 0.0.0.0 brd 0.0.0.0
# ip link add tunl1 type ipip dev eth0
# ip link show tunl1
6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 0.0.0.0 brd 0.0.0.0
But it is not possible with ip6tnl:
# ip link show ip6tnl0
5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/tunnel6 :: brd ::
# ip link add ip6tnl1 type ip6tnl dev eth0
RTNETLINK answers: File exists
This patch aims to make it possible by adding link comparaison in both
tunnel locate and lookup functions; we also modify mtu calculation when
attached to an interface with a lower mtu.
This permits to make use of x-netns communication by moving the newly
created tunnel in a given netns.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 14 Feb 2020 15:16:08 +0000 (07:16 -0800)]
Merge tag 'mac80211-for-net-2020-02-14' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few fixes:
* avoid running out of tracking space for frames that need
to be reported to userspace by using more bits
* fix beacon handling suppression by adding some relevant
elements to the CRC calculation
* fix quiet mode in action frames
* fix crash in ethtool for virt_wifi and similar
* add a missing policy entry
* fix 160 & 80+80 bandwidth to take local capabilities into
account
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 14 Feb 2020 15:09:36 +0000 (07:09 -0800)]
Merge branch 'smc-fixes'
Karsten Graul says:
====================
net/smc: fixes for -net
Fix a syzbot finding and a problem with the CLC handshake content.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 14 Feb 2020 07:59:00 +0000 (08:59 +0100)]
net/smc: no peer ID in CLC decline for SMCD
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be
zero for SMCD.
Fixes:
c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 14 Feb 2020 07:58:59 +0000 (08:58 +0100)]
net/smc: transfer fasync_list in case of fallback
SMC does not work together with FASTOPEN. If sendmsg() is called with
flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to
fallback mode. To handle the previous ioctl FIOASYNC call correctly
in this case, it is necessary to transfer the socket wait queue
fasync_list to the internal TCP socket.
Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com
Fixes:
ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 14 Feb 2020 15:05:18 +0000 (07:05 -0800)]
Merge branch 'hns3-fixes'
Huazhong Tan says:
====================
net: hns3: fixes for -net
This series includes three bugfixes for the HNS3 ethernet driver.
[patch 1] fixes a management table lost issue after IMP reset.
[patch 2] fixes a VF bandwidth configuration not work problem.
[patch 3] fixes a problem related to IPv6 address copying.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Fri, 14 Feb 2020 01:53:43 +0000 (09:53 +0800)]
net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
The IPv6 address defined in struct in6_addr is specified as
big endian, but there is no specified endian in struct
hclge_fd_rule_tuples, so it will cause a problem if directly
use memcpy() to copy ipv6 address between these two structures
since this field in struct hclge_fd_rule_tuples is little endian.
This patch fixes this problem by using be32_to_cpu() to convert
endian of IPv6 address of struct in6_addr before copying.
Fixes:
d93ed94fbeaf ("net: hns3: add aRFS support for PF")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Fri, 14 Feb 2020 01:53:42 +0000 (09:53 +0800)]
net: hns3: fix VF bandwidth does not take effect in some case
When enabling 4 TC after setting the bandwidth of VF, the bandwidth
of VF will resume to default value, because of the qset resources
changed in this case.
This patch fixes it by using a fixed VF's qset resources according to
HNAE3_MAX_TC macro.
Fixes:
ee9e44248f52 ("net: hns3: add support for configuring bandwidth of VF on the host")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Fri, 14 Feb 2020 01:53:41 +0000 (09:53 +0800)]
net: hns3: add management table after IMP reset
In the current process, the management table is missing after the
IMP reset. This patch adds the management table to the reset process.
Fixes:
f5aac71c0327 ("net: hns3: add manager table initialization for hardware")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Fri, 14 Feb 2020 09:40:48 +0000 (10:40 +0100)]
Merge branch 'pm-cpufreq'
* pm-cpufreq:
cpufreq: Make cpufreq_global_kobject static
Shay Bar [Mon, 10 Feb 2020 13:07:28 +0000 (15:07 +0200)]
mac80211: fix wrong 160/80+80 MHz setting
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only.
This is wrong because STA may not support > 80MHz BW.
Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz.
The "support_80_80" and "support_160" setting is based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
From "Draft P802.11REVmd_D3.0.pdf"
Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sergey Matyukevich [Thu, 13 Feb 2020 13:16:16 +0000 (13:16 +0000)]
cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute.
As a result, for strictly validated commands, it's assumed to not be
supported.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Dave Airlie [Fri, 14 Feb 2020 03:03:51 +0000 (13:03 +1000)]
Merge tag 'drm-intel-next-fixes-2020-02-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.6-rc2
Most of these were aimed at a "next fixes" pull already during the merge
window, but there were issues with the baseline I used, which resulted
in a lot of issues in CI. I've regenerated this stuff piecemeal now,
adding gradually to it, and it seems healthy now.
Due to the issues this is much bigger than I'd like. But it was
obviously necessary to take the time to ensure it's not garbage...
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878sl6yfrn.fsf@intel.com
Dave Airlie [Fri, 14 Feb 2020 03:00:56 +0000 (13:00 +1000)]
Merge tag 'amd-drm-fixes-5.6-2020-02-12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.6-2020-02-12:
amdgpu:
- Additional OD fixes for navi
- Misc display fixes
- VCN 2.5 DPG fix
- Prevent build errors on PowerPC on some configs
- GDS EDC fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212224746.3992-1-alexander.deucher@amd.com
Dave Airlie [Fri, 14 Feb 2020 02:57:47 +0000 (12:57 +1000)]
Merge tag 'drm-misc-next-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-next fixes for v5.6:
- Fix build error in drm/edid.
- Plug close-after-free race in vgem_gem_create.
- Handle CONFIG_DMA_API_DEBUG_SG better in drm/msm.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/551b6183-a581-9d12-10a9-24cd929de425@linux.intel.com
Dave Airlie [Fri, 14 Feb 2020 02:52:49 +0000 (12:52 +1000)]
Merge tag 'drm-misc-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v5.6:
- Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3.
- Fix null pointer deref in drm_dp_mst_process_up_req().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
Linus Torvalds [Thu, 13 Feb 2020 22:36:57 +0000 (14:36 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Summary below, but it's all reasonably straightforward. There are some
more fixes on the horizon, but nothing disastrous yet.
Summary:
- Fix build when KASLR is enabled but CONFIG_ARCH_RANDOM is not set
- Fix context-switching of SSBS state on systems that implement it
- Fix spinlock compiler warning introduced during the merge window
- Fix incorrect header inclusion (linux/clk-provider.h)
- Use SYSCTL_{ZERO,ONE} instead of rolling our own static variables
- Don't scream if optional SMMUv3 PMU irq is missing
- Remove some unused function prototypes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
arm64: Fix CONFIG_ARCH_RANDOM=n build
perf/smmuv3: Use platform_get_irq_optional() for wired interrupt
arm64/spinlock: fix a -Wunused-function warning
arm64: ssbs: Fix context-switch when SSBS is present on all CPUs
arm64: use shared sysctl constants
arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations
Linus Torvalds [Thu, 13 Feb 2020 22:34:58 +0000 (14:34 -0800)]
Merge tag 'gpio-v5.6-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- Revert two patches to gpio_do_set_config() and implement the proper
solution that works, also drop an unecessary call in set_config()
- Fix up the lockdep class for hierarchical IRQ domains.
- Remove some bridge code for line directions.
- Fix a register access bug in the Xilinx driver.
* tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: sifive: fix static checker warning
spmi: pmic-arb: Set lockdep class for hierarchical irq domains
gpio: xilinx: Fix bug where the wrong GPIO register is written to
gpiolib: remove unnecessary argument from set_config call
gpio:
bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT
MAINTAINERS: Sort entries in database for GPIO
gpiolib: fix gpio_do_set_config()
Revert "gpiolib: remove set but not used variable 'config'"
Revert "gpiolib: Remove duplicated function gpio_do_set_config()"
David S. Miller [Thu, 13 Feb 2020 22:19:00 +0000 (14:19 -0800)]
Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'
Jason A. Donenfeld says:
====================
icmp: account for NAT when sending icmps from ndo layer
The ICMP routines use the source address for two reasons:
1. Rate-limiting ICMP transmissions based on source address, so
that one source address cannot provoke a flood of replies. If
the source address is wrong, the rate limiting will be
incorrectly applied.
2. Choosing the interface and hence new source address of the
generated ICMP packet. If the original packet source address
is wrong, ICMP replies will be sent from the wrong source
address, resulting in either a misdelivery, infoleak, or just
general network admin confusion.
Most of the time, the icmp_send and icmpv6_send routines can just reach
down into the skb's IP header to determine the saddr. However, if
icmp_send or icmpv6_send is being called from a network device driver --
there are a few in the tree -- then it's possible that by the time
icmp_send or icmpv6_send looks at the packet, the packet's source
address has already been transformed by SNAT or MASQUERADE or some other
transformation that CONNTRACK knows about. In this case, the packet's
source address is most certainly the *wrong* source address to be used
for the purpose of ICMP replies.
Rather, the source address we want to use for ICMP replies is the
original one, from before the transformation occurred.
Fortunately, it's very easy to just ask CONNTRACK if it knows about this
packet, and if so, how to fix it up. The saddr is the only field in the
header we need to fix up, for the purposes of the subsequent processing
in the icmp_send and icmpv6_send functions, so we do the lookup very
early on, so that the rest of the ICMP machinery can progress as usual.
Changes v3->v4:
- Add back the skb_shared checking, since the previous assumption isn't
actually true [Eric]. This implies dropping the additional patches v3 had
for removing skb_share_check from various drivers. We can revisit that
general set of ideas later, but that's probably better suited as a net-next
patchset rather than this stable one which is geared at fixing bugs. So,
this implements things in the safe conservative way.
Changes v2->v3:
- Add selftest to ensure this actually does what we want and never regresses.
- Check the size of the skb header before operating on it.
- Use skb_ensure_writable to ensure we can modify the cloned skb [Florian].
- Conditionalize this on IPS_SRC_NAT so we don't do anything unnecessarily
[Florian].
- It turns out that since we're calling these from the xmit path,
skb_share_check isn't required, so remove that [Florian]. This simplifes the
code a bit too. **The supposition here is that skbs passed to ndo_start_xmit
are _never_ shared. If this is not correct NOW IS THE TIME TO PIPE UP, for
doom awaits us later.**
- While investigating the shared skb business, several drivers appeared to be
calling it incorrectly in the xmit path, so this series also removes those
unnecessary calls, based on the supposition mentioned in the previous point.
Changes v1->v2:
- icmpv6 takes subtly different types than icmpv4, like u32 instead of be32,
u8 instead of int.
- Since we're technically writing to the skb, we need to make sure it's not
a shared one [Dave, 2017].
- Restore the original skb data after icmp_send returns. All current users
are freeing the packet right after, so it doesn't matter, but future users
might not.
- Remove superfluous route lookup in sunvnet [Dave].
- Use NF_NAT instead of NF_CONNTRACK for condition [Florian].
- Include this cover letter [Dave].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 11 Feb 2020 19:47:09 +0000 (20:47 +0100)]
xfrm: interface: use icmp_ndo_send helper
Because xfrmi is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 11 Feb 2020 19:47:08 +0000 (20:47 +0100)]
wireguard: device: use icmp_ndo_send helper
Because wireguard is calling icmp from network device context, it should
use the ndo helper so that the rate limiting applies correctly. This
commit adds a small test to the wireguard test suite to ensure that the
new functions continue doing the right thing in the context of
wireguard. It does this by setting up a condition that will definately
evoke an icmp error message from the driver, but along a nat'd path.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 11 Feb 2020 19:47:07 +0000 (20:47 +0100)]
sunvnet: use icmp_ndo_send helper
Because sunvnet is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly. While we're
at it, doing the additional route lookup before calling icmp_ndo_send is
superfluous, since this is the job of the icmp code in the first place.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 11 Feb 2020 19:47:06 +0000 (20:47 +0100)]
gtp: use icmp_ndo_send helper
Because gtp is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 11 Feb 2020 19:47:05 +0000 (20:47 +0100)]
icmp: introduce helper for nat'd source address in network device context
This introduces a helper function to be called only by network drivers
that wraps calls to icmp[v6]_send in a conntrack transformation, in case
NAT has been used. We don't want to pollute the non-driver path, though,
so we introduce this as a helper to be called by places that actually
make use of this, as suggested by Florian.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 13 Feb 2020 22:17:39 +0000 (14:17 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a Kconfig anomaly when lib/crypto is enabled without Crypto
API"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: Kconfig - allow tests to be disabled when manager is disabled
David S. Miller [Thu, 13 Feb 2020 22:16:35 +0000 (14:16 -0800)]
Merge branch 'skip_sw-skip_hw-validation'
Davide Caratti says:
====================
add missing validation of 'skip_hw/skip_sw'
ensure that all classifiers currently supporting HW offload
validate the 'flags' parameter provided by user:
- patch 1/2 fixes cls_matchall
- patch 2/2 fixes cls_flower
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Tue, 11 Feb 2020 18:33:40 +0000 (19:33 +0100)]
net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of
netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry
to fl_policy.
Fixes:
5b33f48842fa ("net/flower: Introduce hardware offload support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Tue, 11 Feb 2020 18:33:39 +0000 (19:33 +0100)]
net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size
of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper
entry to mall_policy.
Fixes:
b87f7936a932 ("net/sched: Add match-all classifier hw offloading.")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Tue, 11 Feb 2020 10:31:54 +0000 (18:31 +0800)]
net/flow_dissector: remove unexist field description
@thoff has moved to struct flow_dissector_key_control.
Fixes:
42aecaa9bb2b ("net: Get skb hash over flow_keys structure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li RongQing [Tue, 11 Feb 2020 02:13:44 +0000 (10:13 +0800)]
page_pool: refill page when alloc.count of pool is zero
"do {} while" in page_pool_refill_alloc_cache will always
refill page once whether refill is true or false, and whether
alloc.count of pool is less than PP_ALLOC_CACHE_REFILL or not
this is wrong, and will cause overflow of pool->alloc.cache
the caller of __page_pool_get_cached should provide guarantee
that pool->alloc.cache is safe to access, so in_serving_softirq
should be removed as suggested by Jesper Dangaard Brouer in
https://patchwork.ozlabs.org/patch/
1233713/
so fix this issue by calling page_pool_refill_alloc_cache()
only when pool->alloc.count is zero
Fixes:
44768decb7c0 ("page_pool: handle page recycle for NUMA_NO_NODE condition")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 13 Feb 2020 22:10:11 +0000 (14:10 -0800)]
Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-02-12
This series contains fixes to only the ice driver.
Dave fixes logic flaws in the DCB rebuild function which is used after a
reset. Also fixed a configuration issue when switching between firmware
and software LLDP mode where the number of TLV's configured was getting
out of sync with what lldpad thinks is configured.
Paul fixes how the driver displayed all the supported and advertised
link modes by basing it on the PHY capabilities, and in the process
cleaned up a lot of code.
Brett fixes duplicate receive tail bumps by comparing the value we are
writing to tail with the previously written tail value. Also cleaned up
workarounds that are no longer needed with the latest NVM images.
Anirudh cleaned up unnecessary CONFIG_PCI_IOV wrappers. Updated the
driver to use ice_pf_to_dev() instead of &pf->pdev->dev or
&vsi->back->pdev->dev. Cleaned up the string format in print function
calls to remove newlines where applicable.
Akeem updates the link message logging to include "Full Duplex" and
"Negotiated", to help distinguish from "Requested" for FEC.
Bruce fixes and consolidates the logging of firmware/NVM information
during driver load, since the information is duplicate of what is
available via ethtool. Fixed the checking of the Unit Load Status bits
after reset to ensure they are 0x7FF before continuing, by updating the
mask. Cleanup up possible NULL dereferences that were created by a
previous commit.
Ben fixes the driver to use the correct netif_msg_tx/rx_error() to
determine whether to print the MDD event type.
Tony provides several trivial fixes, which include whitespace, typos,
function header comments, reverse Christmas tree issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Thu, 13 Feb 2020 06:03:49 +0000 (07:03 +0100)]
ALSA: pcm: Fix double hw_free calls
The commit
66f2d19f8116 ("ALSA: pcm: Fix memory leak at closing a
stream without hw_free") tried to fix the regression wrt the missing
hw_free call at closing without SNDRV_PCM_IOCTL_HW_FREE ioctl.
However, the code change dropped mistakenly the state check, resulting
in calling hw_free twice when SNDRV_PCM_IOCTL_HW_FRE got called
beforehand. For most drivers, this is almost harmless, but the
drivers like SOF show another regression now.
This patch adds the state condition check before calling do_hw_free()
at releasing the stream for avoiding the double hw_free calls.
Fixes:
66f2d19f8116 ("ALSA: pcm: Fix memory leak at closing a stream without hw_free")
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hd0ajyprg.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alexander Tsoy [Wed, 12 Feb 2020 23:54:50 +0000 (02:54 +0300)]
ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000
It should be safe to ignore clock validity check result if the following
conditions are met:
- only one single sample rate is supported;
- the terminal is directly connected to the clock source;
- the clock type is internal.
This is to deal with some Denon DJ controllers that always reports that
clock is invalid.
Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>