OSDN Git Service
David S. Miller [Wed, 23 Jan 2019 04:53:08 +0000 (20:53 -0800)]
Merge branch 'SPDX-tags-for-PHY-and-MDIO-drivers'
Andrew Lunn says:
====================
SPDX tags for PHY and MDIO drivers
This patchset adds SPDX tags to files where the license information is
clear and consistent. It also removes redundent license text when an
SPDX header is present.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 21 Jan 2019 18:05:51 +0000 (19:05 +0100)]
net: phy: Remove redundent License text when SPDX header is present
The SPDX header makes any license text redundent. Remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 21 Jan 2019 18:05:50 +0000 (19:05 +0100)]
net: phy: Convert some PHY and MDIO driver files to SPDX headers
Where the license text and the MODULE_LICENSE() value agree, convert
to using an SPDX header, removing the license text.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vishal Kulkarni [Mon, 21 Jan 2019 11:42:11 +0000 (17:12 +0530)]
cxgb4/cxgb4vf: Link management changes
1) Speed should be supported by Physical Port Capabilities.
2) report Forward Error Correction mode which are available.
3) Added few comments.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 Jan 2019 04:40:35 +0000 (20:40 -0800)]
Merge branch 'selftests-forwarding-Add-tests-for-VXLAN-routing'
Ido Schimmel says:
====================
selftests: forwarding: Add tests for VXLAN routing
VXLAN routing allows hosts in different overlay networks (i.e.,
different VNIs) to communicate with one another.
Two popular routing models are asymmetric and symmetric routing.
In asymmetric routing the ingress VTEP routes the packet into the
correct VXLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
In symmetric routing both the ingress and egress VTEPs perform routing
in the overlay network into / from the VXLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI. Different tenants
(VRFs) use different L3 VNIs.
Patch #1 adds a test for asymmetric routing. Patches #2-#3 reuse the
topology and add test cases for ARP decapsulation and suppression.
Patch #4 adds a test for symmetric routing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 21 Jan 2019 13:22:54 +0000 (13:22 +0000)]
selftests: forwarding: Add a test case for ARP suppression
ARP suppression allows the Linux bridge to answer ARP requests on behalf
of remote hosts. It reduces the amount of packets a VTEP needs to flood.
This test verifies that ARP suppression on / off works when a neighbour
exists and when it does not exist. It does so by sending an ARP request
from a host connected to one VTEP and checking whether it was received
by a second VTEP.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 21 Jan 2019 13:22:54 +0000 (13:22 +0000)]
selftests: forwarding: Add a test for VXLAN symmetric routing
In a similar fashion to the asymmetric test, add a test for symmetric
routing. In symmetric routing both the ingress and egress VTEPs perform
routing in the overlay network into / from the VXLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI. Different tenants
(VRFs) use different L3 VNIs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 21 Jan 2019 13:22:53 +0000 (13:22 +0000)]
selftests: forwarding: Add a test case for ARP decapsulation
Verify that ARP packets are correctly decapsulated by the ingress VTEP
by removing the neighbours configured on both VLAN interfaces and
running a ping test.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 21 Jan 2019 13:22:52 +0000 (13:22 +0000)]
selftests: forwarding: Add a test for VXLAN asymmetric routing
In asymmetric routing the ingress VTEP routes the packet into the
correct VXLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.
The test uses a simple topology with two VTEPs and two VNIs and verifies
that ping passes between hosts (local / remote) in the same VLAN (VNI)
and in different VLANs belonging to the same tenant (VRF).
While the test does not check VM mobility, it does configure an anycast
gateway using a macvlan device on both VTEPs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 Jan 2019 04:21:58 +0000 (20:21 -0800)]
Merge branch 'ptp_qoriq'
Yangbo Lu says:
====================
External trigger stamp fifo support for ptp_qoriq
This patch-set is to add external trigger stamp fifo support by a new
binding "fsl,extts-fifo", and to add fiper pulse loopback support which
is very useful for validating trigger without external hardware.
Also fixed issues in interrupt enabling/handling.
"fsl,extts-fifo" is required to be added into 1588 timer dts node whose
hardware supports it. The work will be done for some QorIQ platforms dts in
the near future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Mon, 21 Jan 2019 10:41:43 +0000 (18:41 +0800)]
MAINTAINERS: add drivers/ptp/ptp_qoriq_debugfs.c into QorIQ PTP list
Added drivers/ptp/ptp_qoriq_debugfs.c into QorIQ PTP clock driver list.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Mon, 21 Jan 2019 10:41:42 +0000 (18:41 +0800)]
ptp: add debugfs support for ptp_qoriq
This patch is to add debugfs support for ptp_qoriq. Current debugfs
supports to control fiper1/fiper2 loopback mode. If the loopback mode
is enabled, the fiper1/fiper2 pulse is looped back into trigger1/
trigger2 input. This is very useful for validating hardware and driver
without external hardware. Below is an example to enable fiper1 loopback.
echo 1 > /sys/kernel/debug/
2d10e00.ptp_clock/fiper1-loopback
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Mon, 21 Jan 2019 10:41:41 +0000 (18:41 +0800)]
ARM: dts: ls1021a: add 1588 external trigger stamp fifo support
This patch is to add external trigger stamp fifo support
for 1588 timer.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Mon, 21 Jan 2019 10:41:40 +0000 (18:41 +0800)]
dt-binding: ptp_qoriq: document "fsl,extts-fifo" property
Documented "fsl,extts-fifo" property.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Mon, 21 Jan 2019 10:41:39 +0000 (18:41 +0800)]
ptp_qoriq: support external trigger stamp FIFO
The external trigger stamp FIFO was introduced as a new feature
for QorIQ 1588 timer IP block. This patch is to support it by
adding a new dts property "fsl,extts-fifo". Any QorIQ 1588 timer
supporting this feature is required to add this property in its
dts node.
In addition, the FIFO should be cleaned up before enabling external
trigger interrupts. Otherwise, there will be interrupts immediately
just after enabling external trigger interrupts.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Mon, 21 Jan 2019 10:41:38 +0000 (18:41 +0800)]
ptp_qoriq: fix interrupt enabling and handling
The tmr_tevent register would update event bits
no matter tmr_temask bits were set or not. So we
should get interrupts by tmr_tevent & tmr_temask,
and clean up interrupts in tmr_tevent before
enabling them.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Mon, 21 Jan 2019 09:34:53 +0000 (09:34 +0000)]
devlink: Add missing check of nlmsg_put
nlmsg_put may fail, this fix add a check of its return value.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 Jan 2019 03:38:00 +0000 (19:38 -0800)]
Merge branch 'Qualcomm-ethqos'
Vinod Koul says:
====================
net: Add support for Qualcomm ethqos
Some Qualcomm SoCs sport a ethqos controller which use DW ip, so add
the glue driver which uses stmmac driver along with DT bindings for
this device.
This controller supports rgmii mode and doesn't work with existing
phy drivers as they do not remove the phy delay delay in this mode,
so fix the two phy drivers tested with this.
Changes in v3:
- Add description in DT and rename the file and compatible as suggested by
Rob
- Update changelog for QCA8K driver
- Update AT803x phy disable delay for all RGMxx modes
Changes in v2:
- Fix the example in dt-binding
- Remove DT property for disable the delay and disable delay for RGMII mode
in AT803x and QCA8K PHY drivers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinod Koul [Mon, 21 Jan 2019 09:13:18 +0000 (14:43 +0530)]
net: dsa: qca8k: disable delay for RGMII mode
In RGMII mode we should not have any delay in port MAC, so disable
the delay.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinod Koul [Mon, 21 Jan 2019 09:13:17 +0000 (14:43 +0530)]
net: phy: at803x: Disable phy delay for RGMII mode
For RGMII mode, phy delay should be disabled. Add this case along
with disable delay routines.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinod Koul [Mon, 21 Jan 2019 09:13:16 +0000 (14:43 +0530)]
MAINTAINER: Add entry for Qualcomm ETHQOS ethernet driver
Add myself and Niklas as maintainers for this driver
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinod Koul [Mon, 21 Jan 2019 09:13:15 +0000 (14:43 +0530)]
net: stmmac: Add driver for Qualcomm ethqos
Add glue driver to support Qualcomm ETHQOS using stmmac driver.
This is based on downstream driver written by Siddarth Gupta, Sunil
Kumar Paidimarri, Rahul Ankushrao Kawadgave, Nisha Menon, Jagadeesh
Babu Challagundla, Chaitanya Pratapa, Lakshit Tyagi, Suraj Jaiswal,
Sneh Shah and Ventrapragada Ravi Kanth
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinod Koul [Mon, 21 Jan 2019 09:13:14 +0000 (14:43 +0530)]
dt-bindings: net: Add Qualcomm ethqos binding
Add support for Qualcomm ethqos found in some SoCs like QCS404.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Artem Panfilov [Sun, 20 Jan 2019 16:05:15 +0000 (19:05 +0300)]
net: stmmac: implement the SIOCGHWTSTAMP ioctl
This patch adds support for the SIOCGHWTSTAMP ioctl which enables user
processes to read the current hwtstamp_config settings
non-destructively.
Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 Jan 2019 01:18:09 +0000 (17:18 -0800)]
Merge branch 'bridge-mrd'
Linus Lüssing says:
====================
bridge: implement Multicast Router Discovery (RFC4286)
This patchset adds initial Multicast Router Discovery support to
the Linux bridge (RFC4286). With MRD it is possible to detect multicast
routers and mark bridge ports and forward multicast packets to such routers
accordingly.
So far, multicast routers are detected via IGMP/MLD queries and PIM
messages in the Linux bridge. As there is only one active, selected
querier at a time RFC4541 ("Considerations for Internet Group Management
Protocol (IGMP) and Multicast Listener Discovery (MLD) Snooping
Switches") section 2.1.1.a) recommends snooping Multicast Router
Advertisements as provided by MRD (RFC4286).
The first two patches are refactoring some existing code which is reused
for parsing the Multicast Router Advertisements later in the fourth
patch. The third patch lets the bridge join the all-snoopers multicast
address to be able to reliably receive the Multicast Router
Advertisements.
What is not implemented yet from RFC4286 yet:
* Sending Multicast Router Solicitations:
-> RFC4286: "[...] may be sent when [...] an interface is
(re-)initialized [or] MRD is enabled"
* Snooping Multicast Router Terminations:
-> currently this only relies on our own timeouts
* Adjusting timeouts with the values provided in the announcements
Changes in v2:
* rebased to current net-next/master (no conflicts/changes)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Mon, 21 Jan 2019 06:26:28 +0000 (07:26 +0100)]
bridge: Snoop Multicast Router Advertisements
When multiple multicast routers are present in a broadcast domain then
only one of them will be detectable via IGMP/MLD query snooping. The
multicast router with the lowest IP address will become the selected and
active querier while all other multicast routers will then refrain from
sending queries.
To detect such rather silent multicast routers, too, RFC4286
("Multicast Router Discovery") provides a standardized protocol to
detect multicast routers for multicast snooping switches.
This patch implements the necessary MRD Advertisement message parsing
and after successful processing adds such routers to the internal
multicast router list.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Mon, 21 Jan 2019 06:26:27 +0000 (07:26 +0100)]
bridge: join all-snoopers multicast address
Next to snooping IGMP/MLD queries RFC4541, section 2.1.1.a) recommends
to snoop multicast router advertisements to detect multicast routers.
Multicast router advertisements are sent to an "all-snoopers"
multicast address. To be able to receive them reliably, we need to
join this group.
Otherwise other snooping switches might refrain from forwarding these
advertisements to us.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Mon, 21 Jan 2019 06:26:26 +0000 (07:26 +0100)]
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals
With this patch the internal use of the skb_trimmed is reduced to
the ICMPv6/IGMP checksum verification. And for the length checks
the newly introduced helper functions are used instead of calculating
and checking with skb->len directly.
These changes should hopefully make it easier to verify that length
checks are performed properly.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Mon, 21 Jan 2019 06:26:25 +0000 (07:26 +0100)]
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls
This patch refactors ip_mc_check_igmp(), ipv6_mc_check_mld() and
their callers (more precisely, the Linux bridge) to not rely on
the skb_trimmed parameter anymore.
An skb with its tail trimmed to the IP packet length was initially
introduced for the following three reasons:
1) To be able to verify the ICMPv6 checksum.
2) To be able to distinguish the version of an IGMP or MLD query.
They are distinguishable only by their size.
3) To avoid parsing data for an IGMPv3 or MLDv2 report that is
beyond the IP packet but still within the skb.
The first case still uses a cloned and potentially trimmed skb to
verfiy. However, there is no need to propagate it to the caller.
For the second and third case explicit IP packet length checks were
added.
This hopefully makes ip_mc_check_igmp() and ipv6_mc_check_mld() easier
to read and verfiy, as well as easier to use.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xue Chaojing [Sun, 20 Jan 2019 22:15:46 +0000 (22:15 +0000)]
hinic: Add pci device ids
This patch adds PCI device IDs to support following cards:
1. Add device id 0x0205 for HINIC 100GE dual port mezz card.
2. Add device id 0x0210 for HINIC 25GE quad port mezz card.
3. Delete device id 0x0201 for HINIC 100GE dual port card, because
this is used by other product.
4. Macro of device id 0x200 is modified for HINIC 100GE dual port card.
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 20 Jan 2019 10:45:20 +0000 (11:45 +0100)]
r8169: remove PCI DAC support
The old non-PCIe chip versions support PCI DAC, however this feature
seems to be fragile, see comment in the PCI error handler. Therefore
it's disabled per default. I think meanwhile it's time remove support
for this legacy feature. This helps to reduce complexity of the driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 20 Jan 2019 10:12:01 +0000 (11:12 +0100)]
r8169: improve rx buffer allocation
8 years ago, as part of
6f0333b8fde4 ("r8169: use 50% less ram for RX
ring"), the alignment requirement for rx buffers was silently changed
from 8 bytes to 16 bytes. I found nothing explaining this, also the
chip specs I have only mention an 8 byte requirement.
AFAICS kmalloc_node() guarantees allocated memory to be at least
"long long" aligned, what is 8 bytes on a 32 bit machine.
So we can take this memory as-is and avoid some overhead by changing
the alignment requirement back to 8 bytes.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 09:43:07 +0000 (10:43 +0100)]
net: phy: improve phy_init_hw
Currently the soft reset (if defined) is done only if the driver also
implements the config_init callback. I think this dependency is a
mistake, so let's remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 09:30:21 +0000 (10:30 +0100)]
net: phy: fix issue with loading PHY driver w/o initramfs
It was reported that on a system with nfsboot and w/o initramfs network
fails because trying to load the PHY driver returns -ENOENT. Reason was
that due to missing initramfs the modprobe binary isn't available.
So we have to ignore error code -ENOENT.
Fixes:
13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module")
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Jan 2019 22:32:58 +0000 (14:32 -0800)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2019-01-22
This series contains updates to i40e and xsk.
Jan exports xdp_get_umem_from_qid() for other drivers/modules to use.
Refactored the code use the netdev provided umems, instead of containing
them inside our i40e_vsi.
Aleksandr fixes an issue where RSS queues were misconfigured, so limit
the RSS queue number to the online CPU number.
Damian adds support for ethtool's setting and getting the FEC
configuration.
Grzegorz fixes a type mismatch, where the return value was not matching
the function declaration.
Sergey adds checks in the queue configuration handler to ensure the
number of queue pairs requested by the VF is less than maximum possible.
Lihong cleans up code left around from earlier silicon validation in the
i40e debugfs code.
Julia Lawall and Colin Ian King clean up white space indentation issues
found.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Jan 2019 20:04:15 +0000 (12:04 -0800)]
Merge branch 'bonding-add-3ad-stats-and-export-them-via-xstats'
Nikolay Aleksandrov says:
====================
bonding: add 3ad stats and export them via xstats
This set adds support for counting some 3ad-specific packet types and
exports the new stats via the xstats API. atomic64 counters are used
since these are not fastpaths and we can avoid the per-cpu allocations.
Each 3ad counter is exported as a separate attribute to be easily
extensible since we plan to add more later. The stats are per-slave and
when the master stats are requested the slaves' stats are summed up.
Patches 01 and 02 do minor cleanups in preparation for the new stats
API. Patch 03 adds the new stats and patch 04 adds xstats support to
export them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 18 Jan 2019 12:30:23 +0000 (14:30 +0200)]
bonding: add support for xstats and export 3ad stats
This patch adds support for extended statistics (xstats) call to the
bonding. The first user would be the 3ad code which counts the following
events:
- LACPDU Rx/Tx
- LACPDU unknown type Rx
- LACPDU illegal Rx
- Marker Rx/Tx
- Marker response Rx/Tx
- Marker unknown type Rx
All of these are exported via netlink as separate attributes to be
easily extensible as we plan to add more in the future.
Similar to how the bridge and other xstats exports, the structure
inside is:
[ IFLA_STATS_LINK_XSTATS ]
-> [ LINK_XSTATS_TYPE_BOND ]
-> [ BOND_XSTATS_3AD ]
-> [ 3ad stats attributes ]
With this structure it's easy to add more stat types later.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 18 Jan 2019 12:30:22 +0000 (14:30 +0200)]
bonding: add 3ad stats
Count the following types of 3ad packets per slave:
- rx/tx lacpdu
- rx/tx marker
- rx/tx marker response
- rx illegal lacpdus (right now counted on wrong length)
- rx unknown lacpdu type
- rx unknown marker type
The counters are using atomic64 since this is not fast path.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 18 Jan 2019 12:30:21 +0000 (14:30 +0200)]
bonding: 3ad: remove bond_3ad_rx_indication's length argument
Since the received lacpdu is accessed via skb_header_pointer() in
bond_3ad_lacpdu_recv() we no longer need to check for skb->len's length.
If the returned lacpdu pointer is not null that should be enough.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 18 Jan 2019 12:30:20 +0000 (14:30 +0200)]
bonding: adjust style of bond_3ad_rx_indication
No functional changes, adjust the style of bond_3ad_rx_indication to
prepare it for the stats changes:
- reduce indentation by returning early on wrong length
- remove extra new lines between switch cases
- add marker local variable and use it to reduce line length
- rearrange local variables in reverse xmas tree
- separate final return
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Atul Gupta [Fri, 18 Jan 2019 04:56:39 +0000 (20:56 -0800)]
cxgb4: TLS record offload enable
Enable Inline TLS record by default
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Atul Gupta [Fri, 18 Jan 2019 04:56:21 +0000 (20:56 -0800)]
net/tls: free ctx in sock destruct
free tls context in sock destruct. close may not be the last
call to free sock but force releasing the ctx in close
will result in GPF when ctx referred again in tcp_done
[ 515.330477] general protection fault: 0000 [#1] SMP PTI
[ 515.330539] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc7+ #10
[ 515.330657] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0b
11/07/2013
[ 515.330844] RIP: 0010:tls_hw_unhash+0xbf/0xd0
[
[ 515.332220] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 515.332340] CR2:
00007fab32c55000 CR3:
000000009261e000 CR4:
00000000000006e0
[ 515.332519] Call Trace:
[ 515.332632] <IRQ>
[ 515.332793] tcp_set_state+0x5a/0x190
[ 515.332907] ? tcp_update_metrics+0xe3/0x350
[ 515.333023] tcp_done+0x31/0xd0
[ 515.333130] tcp_rcv_state_process+0xc27/0x111a
[ 515.333242] ? __lock_is_held+0x4f/0x90
[ 515.333350] ? tcp_v4_do_rcv+0xaf/0x1e0
[ 515.333456] tcp_v4_do_rcv+0xaf/0x1e0
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Atul Gupta [Fri, 18 Jan 2019 04:55:53 +0000 (20:55 -0800)]
net/tls: build_protos moved to common routine
build protos is required for tls_hw_prot also hence moved to
'tls_build_proto' and called as required from tls_init
and tls_hw_proto. This is required since build_protos
for v4 is moved from tls_register to tls_init in
commit <
28cb6f1eaffdc5a6a9707cac55f4a43aa3fd7895>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 18 Jan 2019 07:27:11 +0000 (23:27 -0800)]
net: introduce a knob to control whether to inherit devconf config
There have been many people complaining about the inconsistent
behaviors of IPv4 and IPv6 devconf when creating new network
namespaces. Currently, for IPv4, we inherit all current settings
from init_net, but for IPv6 we reset all setting to default.
This patch introduces a new /proc file
/proc/sys/net/core/devconf_inherit_init_net to control the
behavior of whether to inhert sysctl current settings from init_net.
This file itself is only available in init_net.
As demonstrated below:
Initial setup in init_net:
# cat /proc/sys/net/ipv4/conf/all/rp_filter
2
# cat /proc/sys/net/ipv6/conf/all/accept_dad
1
Default value 0 (current behavior):
# ip netns del test
# ip netns add test
# ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
2
# ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
0
Set to 1 (inherit from init_net):
# echo 1 > /proc/sys/net/core/devconf_inherit_init_net
# ip netns del test
# ip netns add test
# ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
2
# ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
1
Set to 2 (reset to default):
# echo 2 > /proc/sys/net/core/devconf_inherit_init_net
# ip netns del test
# ip netns add test
# ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
0
# ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
0
Set to a value out of range (invalid):
# echo 3 > /proc/sys/net/core/devconf_inherit_init_net
-bash: echo: write error: Invalid argument
# echo -1 > /proc/sys/net/core/devconf_inherit_init_net
-bash: echo: write error: Invalid argument
Reported-by: Zhu Yanjun <Yanjun.Zhu@windriver.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 7 Jan 2019 22:59:28 +0000 (22:59 +0000)]
i40e: clean up several indentation issues
There are several statements that have incorrect levels of indentation,
fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Julia Lawall [Sun, 30 Dec 2018 15:53:10 +0000 (16:53 +0100)]
i40e: increase indentation
Convert spaces to tabs to get correct alignment.
Found with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alice Michael [Wed, 19 Dec 2018 14:45:42 +0000 (06:45 -0800)]
i40e: update version number
Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Lihong Yang [Wed, 19 Dec 2018 14:45:41 +0000 (06:45 -0800)]
i40e: remove debugfs tx_timeout support
The tx_timeout command from debugfs was originally intended to support
early silicon validation efforts. It is no longer needed. Thus remove it to
avoid misuse of triggering tx_timeout through debugfs.
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sergey Nemov [Wed, 19 Dec 2018 14:45:40 +0000 (06:45 -0800)]
i40e: check queue pairs num in config queues handler
Check if num_queue_pairs number requested by VF is less than
maximum possible value in VIRTCHNL_OP_CONFIG_VSI_QUEUES handler.
Also check if local_vf_id >= 0 in common handler since it is of
int type and can potentially be negative.
Signed-off-by: Sergey Nemov <sergey.nemov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Grzegorz Siwik [Wed, 19 Dec 2018 14:45:39 +0000 (06:45 -0800)]
i40e: Change unmatched function types
Change of function declaration from int to u64 due to
return type mismatch (u64).
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Damian Dybek [Wed, 19 Dec 2018 14:45:38 +0000 (06:45 -0800)]
i40e: Add support FEC configuration for Fortville 25G
This patch adds support for setting/getting FEC configuration
using ethtool options:
set/show-priv-flags rs-fec/base-r-fec
set/show-fec off/rs/baser/auto for kernels version >= 4.14
Signed-off-by: Damian Dybek <damian.dybek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Aleksandr Loktionov [Wed, 19 Dec 2018 14:45:37 +0000 (06:45 -0800)]
i40e: Limiting RSS queues to CPUs
Limiting RSS queues number to online CPUs number in order to
avoid issues with creating misconfigured RSS queues.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jan Sokolowski [Tue, 18 Dec 2018 13:45:14 +0000 (13:45 +0000)]
i40e: Remove umem from VSI
As current implementation of netdev already contains and provides
umems for us, we no longer have the need to contain these
structures in i40e_vsi.
Refactor the code to operate on netdev-provided umems.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jan Sokolowski [Tue, 18 Dec 2018 13:45:13 +0000 (13:45 +0000)]
xsk: export xdp_get_umem_from_qid
Export xdp_get_umem_from_qid for other modules to use.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Mon, 21 Jan 2019 22:41:32 +0000 (14:41 -0800)]
Merge git://git./linux/kernel/git/davem/net
Completely minor snmp doc conflict.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 21 Jan 2019 00:14:44 +0000 (13:14 +1300)]
Linux 5.0-rc3
Linus Torvalds [Mon, 21 Jan 2019 00:12:03 +0000 (13:12 +1300)]
Merge tag 'pstore-v5.0-rc4' of git://git./linux/kernel/git/kees/linux
Pull pstore fixes from Kees Cook:
- Fix console ramoops to show the previous boot logs (Sai Prakash
Ranjan)
- Avoid allocation and leak of platform data
* tag 'pstore-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Avoid allocation and leak of platform data
pstore/ram: Fix console ramoops to show the previous boot logs
Linus Torvalds [Mon, 21 Jan 2019 00:07:03 +0000 (13:07 +1300)]
Merge tag 'gcc-plugins-v5.0-rc4' of git://git./linux/kernel/git/kees/linux
Pull gcc-plugins fixes from Kees Cook:
"Fix ARM per-task stack protector plugin under GCC 9 (Ard Biesheuvel)"
* tag 'gcc-plugins-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: arm_ssp_per_task_plugin: fix for GCC 9+
gcc-plugins: arm_ssp_per_task_plugin: sign extend the SP mask
Linus Torvalds [Sun, 20 Jan 2019 23:52:31 +0000 (12:52 +1300)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix endless loop in nf_tables, from Phil Sutter.
2) Fix cross namespace ip6_gre tunnel hash list corruption, from
Olivier Matz.
3) Don't be too strict in phy_start_aneg() otherwise we might not allow
restarting auto negotiation. From Heiner Kallweit.
4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue.
5) Memory leak in act_tunnel_key, from Davide Caratti.
6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn.
7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet.
8) Missing udplite rehash callbacks, from Alexey Kodanev.
9) Log dirty pages properly in vhost, from Jason Wang.
10) Use consume_skb() in neigh_probe() as this is a normal free not a
drop, from Yang Wei. Likewise in macvlan_process_broadcast().
11) Missing device_del() in mdiobus_register() error paths, from Thomas
Petazzoni.
12) Fix checksum handling of short packets in mlx5, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits)
bpf: in __bpf_redirect_no_mac pull mac only if present
virtio_net: bulk free tx skbs
net: phy: phy driver features are mandatory
isdn: avm: Fix string plus integer warning from Clang
net/mlx5e: Fix cb_ident duplicate in indirect block register
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
net/mlx5e: Fix wrong error code return on FEC query failure
net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
tools: bpftool: Cleanup license mess
bpf: fix inner map masking to prevent oob under speculation
bpf: pull in pkt_sched.h header for tooling to fix bpftool build
selftests: forwarding: Add a test case for externally learned FDB entries
selftests: mlxsw: Test FDB offload indication
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
net: bridge: Mark FDB entries that were added by user as such
mlxsw: spectrum_fid: Update dummy FID index
mlxsw: pci: Return error on PCI reset timeout
mlxsw: pci: Increase PCI SW reset timeout
mlxsw: pci: Ring CQ's doorbell before RDQ's
MAINTAINERS: update email addresses of liquidio driver maintainers
...
Kees Cook [Sun, 20 Jan 2019 22:33:34 +0000 (14:33 -0800)]
pstore/ram: Avoid allocation and leak of platform data
Yue Hu noticed that when parsing device tree the allocated platform data
was never freed. Since it's not used beyond the function scope, this
switches to using a stack variable instead.
Reported-by: Yue Hu <huyue2@yulong.com>
Fixes:
35da60941e44 ("pstore/ram: add Device Tree bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Ard Biesheuvel [Fri, 18 Jan 2019 10:58:07 +0000 (11:58 +0100)]
gcc-plugins: arm_ssp_per_task_plugin: fix for GCC 9+
GCC 9 reworks the way the references to the stack canary are
emitted, to prevent the value from being spilled to the stack
before the final comparison in the epilogue, defeating the
purpose, given that the spill slot is under control of the
attacker that we are protecting ourselves from.
Since our canary value address is obtained without accessing
memory (as opposed to pre-v7 code that will obtain it from a
literal pool), it is unlikely (although not guaranteed) that
the compiler will spill the canary value in the same way, so
let's just disable this improvement when building with GCC9+.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Ard Biesheuvel [Fri, 18 Jan 2019 10:58:06 +0000 (11:58 +0100)]
gcc-plugins: arm_ssp_per_task_plugin: sign extend the SP mask
The ARM per-task stack protector GCC plugin hits an assert in
the compiler in some case, due to the fact the the SP mask
expression is not sign-extended as it should be. So fix that.
Suggested-by: Kugan Vivekanandarajah <kugan.vivekanandarajah@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
David S. Miller [Sun, 20 Jan 2019 19:12:59 +0000 (11:12 -0800)]
Merge branch 'mlxsw-spectrum_router-Add-GRE-tunnel-support-for-Spectrum-2'
Ido Schimmel says:
====================
mlxsw: spectrum_router: Add GRE tunnel support for Spectrum-2
Nir says:
In Spectrum-2, HW implementation of layer 3 tunnels differs from
Spectrum-1 when it comes to the underlay routing table selection.
Spectrum-2 uses a dedicated RIF that points to the virtual router used
for forwarding the encapsulated packets, while Spectrum-1 explicitly
specifies the virtual router itself.
Patches #1 and #2 add additional fields in RITR - Router interface table
register and RTDP - Routing tunnel decap properties respectively, the
fields are required for the new underlay RIF needed for Spectrum-2.
Patches #3-4 allow different set of RIF operations per ASIC type. The
first patch splits the operations and the following patch sets RIF ops
according to ASIC type.
Patches #5-9 introduce small changes to existing code to allow existence
of a dedicated underlay RIF along with the underlay virtual router, and
to support that new type of RIF that has no device.
Patch #10 takes care of updating the tunnel decap properties egress
underlay RIF required for Spectrum-2.
Patch #11 adds the implementation of Spectrum-2 specific RIF operations
and essentially enables layer 3 GRE tunnels on Spectrum-2.
Finally patches #12-18 add tests for GRE IP-in-IP tunnels, both in flat
and hierarchical topologies.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:58 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE hierarchical topology with keys test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where an ikey/okey pair is set. This test is based on hierarchical topology
described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:57 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE hierarchical topology with key test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where a key is set. This test is based on hierarchical topology described
in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:56 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE hierarchical topology test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
based on hierarchical topology described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:55 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE flat topology with keys test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where an ikey/okey pair is set. This test is based on flat topology
described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:54 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE flat topology with key test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where a key is set. This test is based on flat topology described in file
ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:53 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE flat topology test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
based on flat topology described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:52 +0000 (06:50 +0000)]
selftests: forwarding: Add IP tunneling lib
Add a library with helper functions, to be used in testing IP-in-IP and GRE
tunnels, both in flat and in hierarchical topologies.
The topologies used in this library cover the three scenarios of tunnels -
a tunel with no bound device, a tunnel with bound device in the same VRF
and a tunnel with a bound device in a different VRF.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:51 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Add GRE tunnel support for Spectrum-2
Spectrum-2 GRE tunnel implementation requires a specific underlay RIF that
points to the virtual router used for forwarding the encapsulated packet.
Add Spectrum-2 specific loopback router interface creation methods which
may create or reuse the dedicated underlay RIF.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:50 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Update tunnel decap properties
Spectrum-2 requires to specify the egress RIF when setting tunnel decap
properties. Add a method for accessing the underlay RIF index and then use
it when setting decap properties.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:49 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Support RIF without device
Spectrum-2 underlay RIF is merely an auxiliary RIF that points to the
virtual router used for encapsulated packets lookup. It exists only when
its overlay RIF exists but may be shared with other overlay RIFs.
Hence it is undesired to mark any device as related to it.
Therefore allow usage of NULL device when allocating RIF.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:48 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Change mlxsw_sp_ipip_lb_ul_vr_id()
For the sake of Spectrum-2 GRE support, as ul_vr_id field is reserved for
Spectrum-2, Change mlxsw_sp_ipip_lb_ul_vr_id() implementation not to use
the reserved field.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:47 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Add underlay RIF ID support
Spectrum-2 GRE tunnels underlay should be given not only the virtual router
information for an encapsulated packet lookup, but also an underlay RIF
object which belongs to a virtual router.
Therefore add ul_rif_id field in struct mlxsw_sp_rif_ipip_lb, to be used
later in Spectrum-2 underlay RIF implementation. This field complements
ul_vr_id field, already present and defined as reserved for Spectrum-2.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:46 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Mark RIF index as taken before creation
The presence of an allocated RIF in mlxsw_sp->router->rifs[rif_index] marks
that rif_index as taken.
Set the marking of a taken RIF to happen before calling ops->create in
order to allow creation of a GRE underlay RIF, which may be allocated and
created as part of an overlay RIF creation.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:42 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Adjust loopback RIF configuration
In Spectrum-2, the underlay routing table is pointed by an underlay router
interface in contrary to Spectrum where only an underlay virtual router
should be set. That makes the underlay virtual router field in RITR
reserved for Spectrum-2.
Change loopback RIF creation function to support the new underlay RIF
field, however leave this field reserved for Spectrum-1 updates.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:41 +0000 (06:50 +0000)]
mlxsw: spectrum: Set RIF ops per ASIC type
Set RIF ops array as member of mlxsw_sp in order to control which RIF
operations callbacks are called per ASIC type. This is needed to control
per ASIC handling of loopback RIF configurations.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:40 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Split RIF ops array for Spectrum-2 support
Split RIF ops array for Spectrum-1 and Spectrum-2 callbacks in order to
support different sets of operations for loopback RIF handling, as
underlying implementation differs between the ASICs.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 20 Jan 2019 06:50:39 +0000 (06:50 +0000)]
mlxsw: reg: Add underlay egress RIF field in RTDP register
In Spectrum-2 we need to specify the underlay egress router interface
when performing IP-in-IP and NVE packet decapsulation in the underlay
router.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:39 +0000 (06:50 +0000)]
mlxsw: reg: Add fields to RITR - Router Interface Table Register
Add fields relevant for Spectrum-2 Loopback IPinIP router interface
creation. Add additional Loopback RIF protocol value - Generic, used for
creation of an explicit underlay RIF, and also add a field named
underlay_rif used for specifying the underlay RIF of a tunnel.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 20 Jan 2019 18:37:16 +0000 (07:37 +1300)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: Use copy_to_iter() to send control queue response
vhost: return EINVAL if iovecs size does not match the message size
virtio-balloon: tweak config_changed implementation
virtio: don't allocate vqs when names[i] = NULL
virtio_pci: use queue idx instead of array idx to set up the vq
virtio: document virtio_config_ops restrictions
virtio: fix virtio_config_ops description
Linus Torvalds [Sun, 20 Jan 2019 18:35:26 +0000 (07:35 +1300)]
Merge tag 'for-5.0-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A handful of fixes (some of them in testing for a long time):
- fix some test failures regarding cleanup after transaction abort
- revert of a patch that could cause a deadlock
- delayed iput fixes, that can help in ENOSPC situation when there's
low space and a lot data to write"
* tag 'for-5.0-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: wakeup cleaner thread when adding delayed iput
btrfs: run delayed iputs before committing
btrfs: wait on ordered extents on abort cleanup
btrfs: handle delayed ref head accounting cleanup in abort
Revert "btrfs: balance dirty metadata pages in btrfs_finish_ordered_io"
Linus Torvalds [Sun, 20 Jan 2019 18:23:42 +0000 (07:23 +1300)]
Merge tags 'compiler-attributes-for-linus-v5.0-rc3' and 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux
Pull misc clang fixes from Miguel Ojeda:
- A fix for OPTIMIZER_HIDE_VAR from Michael S Tsirkin
- Update clang-format with the latest for_each macro list from Jason
Gunthorpe
* tag 'compiler-attributes-for-linus-v5.0-rc3' of git://github.com/ojeda/linux:
include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR
* tag 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux:
clang-format: Update .clang-format with the latest for_each macro list
Florian La Roche [Sat, 19 Jan 2019 15:14:50 +0000 (16:14 +0100)]
fix int_sqrt64() for very large numbers
If an input number x for int_sqrt64() has the highest bit set, then
fls64(x) is 64. (1UL << 64) is an overflow and breaks the algorithm.
Subtracting 1 is a better guess for the initial value of m anyway and
that's what also done in int_sqrt() implicitly [*].
[*] Note how int_sqrt() uses __fls() with two underscores, which already
returns the proper raw bit number.
In contrast, int_sqrt64() used fls64(), and that returns bit numbers
illogically starting at 1, because of error handling for the "no
bits set" case. Will points out that he bug probably is due to a
copy-and-paste error from the regular int_sqrt() case.
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Deacon [Sat, 19 Jan 2019 21:56:05 +0000 (21:56 +0000)]
x86: uaccess: Inhibit speculation past access_ok() in user_access_begin()
Commit
594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
makes the access_ok() check part of the user_access_begin() preceding a
series of 'unsafe' accesses. This has the desirable effect of ensuring
that all 'unsafe' accesses have been range-checked, without having to
pick through all of the callsites to verify whether the appropriate
checking has been made.
However, the consolidated range check does not inhibit speculation, so
it is still up to the caller to ensure that they are not susceptible to
any speculative side-channel attacks for user addresses that ultimately
fail the access_ok() check.
This is an oversight, so use __uaccess_begin_nospec() to ensure that
speculation is inhibited until the access_ok() check has passed.
Reported-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 20 Jan 2019 03:27:59 +0000 (15:27 +1200)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc3.
We've plugged a couple of nasty issues involving KASLR-enabled
kernels, and removed a redundant #define that was introduced as part
of the KHWASAN fixes from akpm at -rc2.
- Fix broken kpti page-table rewrite in bizarre KASLR configuration
- Fix module loading with KASLR
- Remove redundant definition of ARCH_SLAB_MINALIGN"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kasan, arm64: remove redundant ARCH_SLAB_MINALIGN define
arm64: kaslr: ensure randomized quantities are clean to the PoC
arm64: kpti: Update arm64_kernel_use_ng_mappings() when forced on
David S. Miller [Sun, 20 Jan 2019 00:38:12 +0000 (16:38 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-20
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem.
2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter.
3) Fix map in map masking to prevent out-of-bounds access under
speculative execution, from Daniel.
4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal
pacing, from Yuchung.
5) Fix json writer license in bpftool, from Thomas.
6) Fix AF_XDP to check if an actually queue exists during umem
setup, from Krzysztof.
7) Several fixes to BPF stackmap's build id handling. Another fix
for bpftool build to account for libbfd variations wrt linking
requirements, from Stanislav.
8) Fix BPF samples build with clang by working around missing asm
goto, from Yonghong.
9) Fix libbpf to retry program load on signal interrupt, from Lorenz.
10) Various minor compile warning fixes in BPF code, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 16 Jan 2019 01:19:22 +0000 (20:19 -0500)]
bpf: in __bpf_redirect_no_mac pull mac only if present
Syzkaller was able to construct a packet of negative length by
redirecting from bpf_prog_test_run_skb with BPF_PROG_TYPE_LWT_XMIT:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:345 [inline]
BUG: KASAN: slab-out-of-bounds in skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline]
BUG: KASAN: slab-out-of-bounds in __pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395
Read of size
4294967282 at addr
ffff8801d798009c by task syz-executor2/12942
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x23/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:345 [inline]
skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline]
__pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395
__pskb_copy include/linux/skbuff.h:1053 [inline]
pskb_copy include/linux/skbuff.h:2904 [inline]
skb_realloc_headroom+0xe7/0x120 net/core/skbuff.c:1539
ipip6_tunnel_xmit net/ipv6/sit.c:965 [inline]
sit_tunnel_xmit+0xe1b/0x30d0 net/ipv6/sit.c:1029
__netdev_start_xmit include/linux/netdevice.h:4325 [inline]
netdev_start_xmit include/linux/netdevice.h:4334 [inline]
xmit_one net/core/dev.c:3219 [inline]
dev_hard_start_xmit+0x295/0xc90 net/core/dev.c:3235
__dev_queue_xmit+0x2f0d/0x3950 net/core/dev.c:3805
dev_queue_xmit+0x17/0x20 net/core/dev.c:3838
__bpf_tx_skb net/core/filter.c:2016 [inline]
__bpf_redirect_common net/core/filter.c:2054 [inline]
__bpf_redirect+0x5cf/0xb20 net/core/filter.c:2061
____bpf_clone_redirect net/core/filter.c:2094 [inline]
bpf_clone_redirect+0x2f6/0x490 net/core/filter.c:2066
bpf_prog_41f2bcae09cd4ac3+0xb25/0x1000
The generated test constructs a packet with mac header, network
header, skb->data pointing to network header and skb->len 0.
Redirecting to a sit0 through __bpf_redirect_no_mac pulls the
mac length, even though skb->data already is at skb->network_header.
bpf_prog_test_run_skb has already pulled it as LWT_XMIT !is_l2.
Update the offset calculation to pull only if skb->data differs
from skb->network_header, which is not true in this case.
The test itself can be run only from commit
1cf1cae963c2 ("bpf:
introduce BPF_PROG_TEST_RUN command"), but the same type of packets
with skb at network header could already be built from lwt xmit hooks,
so this fix is more relevant to that commit.
Also set the mac header on redirect from LWT_XMIT, as even after this
change to __bpf_redirect_no_mac that field is expected to be set, but
is not yet in ip_finish_output2.
Fixes:
3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Sun, 20 Jan 2019 00:09:14 +0000 (16:09 -0800)]
Merge branch 'r8169-series-with-smaller-improvements'
Heiner Kallweit says:
====================
r8169: series with smaller improvements
Series with smaller improvements.
v2:
- fixed a small copy & paste error in patch 4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:07:34 +0000 (22:07 +0100)]
r8169: factor out getting ether_clk
rtl_init_one() is complex enough, so we better factor out getting the
ether_clk.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:07:05 +0000 (22:07 +0100)]
r8169: replace mii_bus member with phy_device member in struct rtl8169_private
Accessing the phy_device indirectly via the netdevice causes few issues:
- Accessing the phy_device when it's not attached may cause a NPE.
- If we have to access the phy_device when it's not attached we have
to use mdiobus_get_phy() to get a reference to the phy_device.
Therefore store a phy_device reference in struct rtl8169_private directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:06:25 +0000 (22:06 +0100)]
r8169: reset chip synchronously in __rtl8169_resume
Triggering an asynchronous reset is problematic for the following
reasons, therefore reset the chip synchronously.
- The reset routine resets registers and parameters behind our back
what may collide with code executed after triggering the reset.
- __rtl8169_resume() is called as part of pm_runtime_get_sync() and
callers expect that the chip is fully resumed afterwards.
In context of this driver triggering an asynchonous reset should be
considered an emergency procedure.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:05:48 +0000 (22:05 +0100)]
r8169: add helpers for locking / unlocking the config registers
Add helpers for locking / unlocking the config registers.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:05:14 +0000 (22:05 +0100)]
r8169: improve rtl_pcie_state_l2l3_enable
All calls to this function have the enable parameter set to false.
So we can replace the function with a disable-only version.
v2:
- fixed copy & paste error
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:03:49 +0000 (22:03 +0100)]
r8169: initialize task workqueue only once
It's sufficient to initialize the workqueue once, therefore remove the
additional initialization whenever rtl_open() is called.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:03:13 +0000 (22:03 +0100)]
r8169: remove unneeded call in pcierr
rtl8169_hw_reset() is called as part of the reset routine which is
scheduled in the line after. So we can remove the call to
rtl8169_hw_reset() here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:02:40 +0000 (22:02 +0100)]
r8169: remove rtl_get_events
This helper is used only once, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael S. Tsirkin [Fri, 18 Jan 2019 04:20:07 +0000 (23:20 -0500)]
virtio_net: bulk free tx skbs
Use napi_consume_skb() to get bulk free. Note that napi_consume_skb is
safe to call in a non-napi context as long as the napi_budget flag is
correct.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 18 Jan 2019 01:14:01 +0000 (17:14 -0800)]
net_sched: add performance counters for basic filter
Similar to u32 filter, it is useful to know how many times
we reach each basic filter and how many times we pass the
ematch attached to it.
Sample output:
filter protocol arp pref 49152 basic chain 0
filter protocol arp pref 49152 basic chain 0 handle 0x1 (rule hit 3 success 3)
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1 installed 81 sec used 4 sec
Action statistics:
Sent 126 bytes 3 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>