OSDN Git Service
Dave Airlie [Tue, 4 Aug 2020 02:56:24 +0000 (12:56 +1000)]
drm/ttm: drop priv pointer in memory manager
This isn't needed anymore by any drivers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-52-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:23 +0000 (12:56 +1000)]
drm/nouveau/ttm: move to driver allocated manager
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-51-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:22 +0000 (12:56 +1000)]
drm/vmwgfx/gmrid: convert to driver controlled allocation.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-50-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:21 +0000 (12:56 +1000)]
drm/vmwgfx/ttm: move thp to driver managed
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-49-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:20 +0000 (12:56 +1000)]
drm/ttm: move range manager to subclassed driver allocation
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-48-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:19 +0000 (12:56 +1000)]
drm/ttm: make ttm_range_man_init/takedown take type + args
This makes it easier to move these to a driver allocated system
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-47-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:18 +0000 (12:56 +1000)]
drm/amdgpu/ttm: use bo manager subclassing for vram/gtt mgrs
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-46-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:17 +0000 (12:56 +1000)]
drm/ttm: allow drivers to provide their own manager subclasses
This will get removed eventually and all drivers will use this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-45-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:16 +0000 (12:56 +1000)]
drm/ttm: rename manager variable to make sure wrapper is used.
Other users of this should notice this change and switch to wrapper.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-44-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:15 +0000 (12:56 +1000)]
drm/vmwgfx/ttm: use wrapper to access memory manager
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-43-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:14 +0000 (12:56 +1000)]
drm/radeon/ttm: use wrapper to access memory manager
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-42-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:13 +0000 (12:56 +1000)]
drm/qxl/ttm: use wrapper to access memory manager
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-41-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:12 +0000 (12:56 +1000)]
drm/nouveau/ttm: use wrapper to access memory managers
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-40-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:11 +0000 (12:56 +1000)]
drm/vram-helper: use wrapper to access memory managers
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-39-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:10 +0000 (12:56 +1000)]
drm/amdgfx/ttm: use wrapper to get ttm memory managers
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-38-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:09 +0000 (12:56 +1000)]
drm/ttm: add wrapper to get manager from bdev.
This will allow different abstractions later.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-37-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:08 +0000 (12:56 +1000)]
drm/ttm: make TTM responsible for cleaning system only.
Drivers should all be cleaning up their memory managers
themselves now, so let the core just clean the system one up.
Remove the legacy cleaning interface.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-36-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:07 +0000 (12:56 +1000)]
drm/ttm: remove range manager legacy takedown path
Now all drivers have been converted, drop the non-driver path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-35-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:06 +0000 (12:56 +1000)]
drm/vmwgfx: fix gmrid takedown paths to new interface
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-34-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:05 +0000 (12:56 +1000)]
drm/qxl/ttm: use new takedown path
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-33-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:04 +0000 (12:56 +1000)]
drm/radeon/ttm: use new takedown paths
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-32-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:03 +0000 (12:56 +1000)]
drm/nouveau: use new cleanup paths
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-31-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:02 +0000 (12:56 +1000)]
drm/vram_helper: call explicit mm takedown
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-30-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:01 +0000 (12:56 +1000)]
drm/vmwgfx: takedown vram manager
Don't bother returning EBUSY, nobody cares enough,
if the driver has a problem, it should deal with it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-29-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:56:00 +0000 (12:56 +1000)]
drm/amdgpu/ttm: use new takedown path
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-28-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:59 +0000 (12:55 +1000)]
drm/ttm: start allowing drivers to use new takedown path (v2)
Allow the takedown path callback to be optional as well.
v2: use fini for range manager
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-27-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:58 +0000 (12:55 +1000)]
drm/ttm: make some inline helper functions for cleanup paths. (v2)
The disable path is just temporary for now, it will be dropped once has_type
is gone in a later patch.
v2: add docs.
rename to ttm_mem_type_manager namespace
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-26-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:57 +0000 (12:55 +1000)]
drm/ttm: pass man around instead of mem_type in some places
This makes it easier to cleanup things
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-25-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:56 +0000 (12:55 +1000)]
drm/ttm: purge old manager init path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-24-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:55 +0000 (12:55 +1000)]
drm/ttm: convert system manager init to new code.
Remove the exit path, since this can't fail now.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-23-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:54 +0000 (12:55 +1000)]
drm/vmwgfx/ttm: switch gmrid allocator to new init paths.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-22-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:53 +0000 (12:55 +1000)]
drm/vmwgfx/ttm: convert vram mm init to new code paths
Split out the vram thp init path vs the range manager init.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-21-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:52 +0000 (12:55 +1000)]
drm/nouveau: use new memory manager init paths
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-20-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:51 +0000 (12:55 +1000)]
drm/vram_helper: use new ttm manager init function
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-19-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:50 +0000 (12:55 +1000)]
drm/qxl/ttm: use new init path for manager
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-18-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:49 +0000 (12:55 +1000)]
drm/radeon: use new ttm man init path
Use the new common manager init path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-17-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:48 +0000 (12:55 +1000)]
drm/amdgpu/ttm: init managers from the driver side.
Use new init calls to unwrap manager init
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-16-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:47 +0000 (12:55 +1000)]
drm/ttm: provide a driver-led init path for range mm manager. (v2)
This lets the generic range mm manager be initialised by the driver.
v2: add docs.
rename api to range_man_init for now.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-15-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:46 +0000 (12:55 +1000)]
drm/ttm: split the mm manager init code (v2)
This will allow the driver to control the ordering here better.
Eventually the old path will be removed.
v2: add docs for new APIs.
rename new path to ttm_mem_type_manager_init/set_used(for now)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-14-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:45 +0000 (12:55 +1000)]
drm/vram-helper: call the ttm manager debug function
This code was assuming there was a drm_mm here, don't do
that call the correct API.
v2: use the new exported interface.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-13-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:44 +0000 (12:55 +1000)]
drm/qxl/ttm: call ttm manager debug (v2)
v2: use the new exported interface.
This code was poking inside a struct and assuming it was a drm_mm
at the start. Call the proper API.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-12-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:43 +0000 (12:55 +1000)]
drm/vmwgfx/gmrid: don't provide pointless ttm debug callback
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-11-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:42 +0000 (12:55 +1000)]
drm/nouveau/ttm: don't fill in blank ttm debug callback
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-10-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:41 +0000 (12:55 +1000)]
drm/ttm: export memory type debug entrypoint.
As suggested on review, just export the memory type debug for
drivers to use, while also making the debug callback optional
(don't need to test for system as it won't init it).
rename it to be more consistent with object name for now.
(we may rename all the objects later.)
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-9-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:40 +0000 (12:55 +1000)]
drm/vram-helper: remove populate/unpopulate
The default path for populate/unpopulate is already this.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-8-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:39 +0000 (12:55 +1000)]
drm/ttm: use a helper for unlocked moves to the lru tail
The pattern was repeated a few times, just make an inline for it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-7-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:38 +0000 (12:55 +1000)]
drm/ttm/amdgpu: consolidate ttm reserve paths
Drop the WARN_ON and consolidate the two paths into one.
Use the consolidate slowpath in the execbuf utils code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-6-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:37 +0000 (12:55 +1000)]
qxl/ttm: drop the unusued no wait flag to reserve function
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-5-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:36 +0000 (12:55 +1000)]
nouveau: use ttm populate mapping functions. (v2)
Instead of rolling driver copies of them.
v2: cleanup return handling (Ben)
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-4-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:35 +0000 (12:55 +1000)]
drm/vmwgfx: drop bo map/unmap dma functions.
The map one was used once, just inline it, and drop them both.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-3-airlied@gmail.com
Dave Airlie [Tue, 4 Aug 2020 02:55:34 +0000 (12:55 +1000)]
drm/vmwgfx: consolidate ttm object creation and populate
These two functions has the same code in them, create a common
helper function instead.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-2-airlied@gmail.com
Tom Rix [Mon, 20 Jul 2020 19:18:45 +0000 (12:18 -0700)]
video: fbdev: pvr2fb: initialize variables
clang static analysis reports this repesentative error
pvr2fb.c:1049:2: warning: 1st function call argument
is an uninitialized value [core.CallAndMessage]
if (*cable_arg)
^~~~~~~~~~~~~~~
Problem is that cable_arg depends on the input loop to
set the cable_arg[0]. If it does not, then some random
value from the stack is used.
A similar problem exists for output_arg.
So initialize cable_arg and output_arg.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720191845.20115-1-trix@redhat.com
Thomas Zimmermann [Tue, 4 Aug 2020 06:51:58 +0000 (08:51 +0200)]
drm/mgag200: Set PCI option register in G200SE models
The initial value of the PCI option register got lost while refactoring
the driver init code. Restore the setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
2021708e0d6e ("drm/mgag200: Initialize PCI registers early during device setup")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804065158.21049-1-tzimmermann@suse.de
Gustavo A. R. Silva [Tue, 7 Jul 2020 21:05:39 +0000 (16:05 -0500)]
fbdev: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707210539.GA12530@embeddedor
Linus Walleij [Mon, 6 Jul 2020 12:59:31 +0000 (14:59 +0200)]
omapfb/dss: Include the right header
The hdmi4.c and hdmi5.c files include the legacy GPIO
header <linux/gpio.h> but does not use any of the symbols
from this file.
What it does use is the implicit inclusion of <linux/of.h>
leading to compile errors if we just drop this include.
Include the right header.
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706125931.752539-1-linus.walleij@linaro.org
Thomas Zimmermann [Wed, 29 Jul 2020 13:41:44 +0000 (15:41 +0200)]
fbdev: Remove trailing whitespace
Removes trailing whitespaces in several places.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729134148.6855-2-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:44 +0000 (12:28 +0200)]
drm/mgag200: Add support for G200 desktop cards
This patch adds support for G200 desktop cards. We can reuse the whole
memory and modesetting code. A few PCI and DAC register values have to
be updated accordingly.
The most significant change is in the PLL setup. The driver parses the
device's BIOS to retrieve clock limits and reference clocks. With no BIOS
found, safe defaults are being used.
v2:
* copy BIOS ROM to system memory and access with regular
load/store; resolves potential HW limitations
* fix some stray whitespaces
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Co-developed-by: Egbert Eich <eich@suse.com>
Signed-off-by: Egbert Eich <eich@suse.com>
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-9-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:43 +0000 (12:28 +0200)]
drm/mgag200: Move G200SE's unique id into model-specific data
The unique revision id is only useful for G200SE devices. Store the
value in model-specific data within struct mga_device. While at it,
the patch also adds an init helper for the value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-8-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:42 +0000 (12:28 +0200)]
drm/mgag200: Clear <page> field during MM init
The modesetting code initialized the memory-related register CRTCEXT4.
Move this code to MM initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-7-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:41 +0000 (12:28 +0200)]
drm/mgag200: Set MISC memory flags in mm init code
The modesetting code initialized several memory-related flags in the
MISC register. Move this code to MM initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-6-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:40 +0000 (12:28 +0200)]
drm/mgag200: Enable MGA mode during device register initialization
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with
the latter being required for KMS. So far, MGA mode was enabled during
modesetting. As it's fundamental for device operation, the patch moves
it next to the device register setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-5-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:39 +0000 (12:28 +0200)]
drm/mgag200: Initialize PCI registers early during device setup
So far, PCI option registers were initialized as part of modesetting,
which is late in the process. As these registers control fundamental
operation, they should be set early.
The patch moves the PCI option handling into device register setup,
before even the device MMIO memory is being mapped. No functional
changes made.
Moving the PCI code next to the device-register setup also allows to
remove the has_sdram field from struct mga_device. The state is now
local to the init helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-4-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:38 +0000 (12:28 +0200)]
drm/mgag200: Move register initialization into helper function
The mgag200 driver maps registers into the address space. Move the
code into a separate helper function. No functional changes.
One small difference is in the handling of SDRAM/SGRAM. MGA devices
can come with either SDRAM or SGRAM. So far, the driver checked for
SDRAM, which is the common case. The patch moves this code into a
separate helper and checks for SGRAM, which is the special case. The
test itself is the same as before.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-3-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 10:28:37 +0000 (12:28 +0200)]
drm/mgag200: Enable caching for SHMEM pages
SHMEM pages use write-combine caching by default, but can also use the
platform's default page caching. Doing so may improve the performance
of I/O on the framebuffer.
Mgag200's hardware does not access framebuffer pages directly (i.e.,
via DMA), so enabling caching does not have an effect on consistency
of the framebuffer memory or the displayed data.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-2-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:52:06 +0000 (15:52 +0200)]
drm/ast: Managed device release
This turns the ast's device cleanup code into a managed release helper
function. Note that the code uses devres helpers. The release function
switches the device back to VGA mode and therefore runs during HW device
cleanup; not at DRM device cleanup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-10-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:52:05 +0000 (15:52 +0200)]
drm/ast: Manage release of firmware backup memory
The ast driver keeps a backup copy of the DP501 encoder's firmware. This
patch adds managed release of the allocated memory.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-9-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:52:04 +0000 (15:52 +0200)]
drm/ast: Managed release of ast firmware
The ast driver loads firmware for the DP501 display encoder. The
patch replaces the removal code with a managed release function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-8-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:52:03 +0000 (15:52 +0200)]
drm/ast: Embed struct drm_device in struct ast_private
Turns struct ast_private into a subclass of struct drm_device by
embedding the latter. This allows for using DRM's managed device
allocation.
The use of struct drm_device.dev_private is deprecated. The patch
converts the last remaining users to to_ast_private().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-7-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:52:02 +0000 (15:52 +0200)]
drm/ast: Don't use ast->dev if dev is available
Several places in ast use ast->dev, when a dev pointer is already
available within the function. Remove the extra indirection. No
functional changes made.
This is just a small cleanup before embedding the DRM device instance
in struct ast_private.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-6-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:52:01 +0000 (15:52 +0200)]
drm/ast: Replace struct_drm_device.dev_private with to_ast_private()
The ast code still references dev_private in several place when looking
up the ast device structure. Convert the remaining locations to use
to_ast_private().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-5-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:52:00 +0000 (15:52 +0200)]
drm/ast: Replace driver load/unload functions with device create/destroy
The ast driver's load and unload functions are left-overs from when
struct drm_driver.load/unload was still in use. The PCI probe helper
allocated the DRM device and ran load to initialize it.
This patch replaces this code with device create and destroy. The
main difference is that the device's create function allocates the
DRM device and ast structures in the same place. This will be required
for switching ast to managed allocations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:51:59 +0000 (15:51 +0200)]
drm/ast: Separate DRM driver from PCI code
Putting the DRM driver to the top of the file and the PCI code to the
bottom makes ast_drv.c more readable. While at it, the patch prefixes
file-scope variables with ast_.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-3-tzimmermann@suse.de
Thomas Zimmermann [Thu, 30 Jul 2020 13:51:58 +0000 (15:51 +0200)]
drm/ast: Embed CRTC and connector in struct ast_private
Only single instances of CRTC and connector are supported per
device. Embed both in ast's structure and remove the individual
memory allocations. DRM's CRTC cleanup helpers replace the rsp.
destroy function in ast.
While at it, also convert to_ast_connector() to a function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-2-tzimmermann@suse.de
Daniel Vetter [Sat, 1 Aug 2020 09:26:25 +0000 (11:26 +0200)]
drm/syncobj: Tune down unordered timeline DRM_ERROR
Userspace can provoke this, we generally don't allow userspace to spam
dmesg. Tune it down to debug. Unfortunately we don't have easy access
to the drm_device here (not at all without changing a few things), so
leave it as old style dmesg output for now.
References: https://patchwork.freedesktop.org/series/80146/
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801092625.1107609-1-daniel.vetter@ffwll.ch
Melissa Wen [Thu, 30 Jul 2020 20:25:24 +0000 (17:25 -0300)]
drm/vkms: fix xrgb on compute crc
The previous memset operation was not correctly zeroing the alpha
channel to compute the crc, and as a result, the IGT subtest
kms_cursor_crc/pipe-A-cursor-alpha-transparent fails.
Fixes:
db7f419c06d7c ("drm/vkms: Compute CRC with Cursor Plane")
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730202524.5upzuh4irboru7my@smtp.gmail.com
Marek Vasut [Tue, 28 Jul 2020 20:12:42 +0000 (22:12 +0200)]
drm/panel: simple: Add Chefree CH101OLHLWH-002 panel
Add support for the Chefree CH101OLHLWH-002 10.1" (1280x800)
color TFT LCD panel, connected over LVDS.
Timings are taken from the datasheet version P0.5.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728201242.4336-3-marex@denx.de
Marek Vasut [Tue, 28 Jul 2020 20:12:41 +0000 (22:12 +0200)]
dt-bindings: Add DT bindings for Chefree CH101OLHLWH-002
Add DT bindings for Chefree CH101OLHLWH-002 10.1" 1280x800 LCD.
This panel is connected via LVDS.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728201242.4336-2-marex@denx.de
Marek Vasut [Tue, 28 Jul 2020 20:12:40 +0000 (22:12 +0200)]
dt-bindings: Add vendor prefix for Chefree
The Chefree Technology Corp. is an LCD panel manufacturer.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728201242.4336-1-marex@denx.de
Bernard Zhao [Sat, 1 Aug 2020 12:02:13 +0000 (20:02 +0800)]
drm/panel: remove return value of function drm_panel_add
The function "int drm_panel_add(struct drm_panel *panel)"
always returns 0, this return value is meaningless.
Also, there is no need to check return value which calls
"drm_panel_add and", error branch code will never run.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
Christian König [Thu, 23 Jul 2020 15:13:47 +0000 (17:13 +0200)]
drm/ttm: remove the init_mem_type callback
It is a very strange concept to call a function which just
calls back the caller for the functions parameters.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382085/
Christian König [Thu, 23 Jul 2020 14:40:17 +0000 (16:40 +0200)]
drm/vram-helper: stop implementing init_mem_type
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382086/
Christian König [Thu, 23 Jul 2020 14:29:59 +0000 (16:29 +0200)]
drm/qxl: stop implementing init_mem_type
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382083/
Christian König [Thu, 23 Jul 2020 13:39:57 +0000 (15:39 +0200)]
drm/nouveau: stop implementing init_mem_type
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382081/
Christian König [Thu, 23 Jul 2020 13:19:49 +0000 (15:19 +0200)]
drm/vmwgfx: stop implementing init_mem_type v2
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
v2: keep extra system domain handling
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382082/
Christian König [Thu, 23 Jul 2020 13:07:45 +0000 (15:07 +0200)]
drm/amdgpu: stop implementing init_mem_type
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382084/
Christian König [Thu, 23 Jul 2020 09:47:57 +0000 (11:47 +0200)]
drm/radeon: stop implementing init_mem_type
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382080/
Christian König [Tue, 21 Jul 2020 07:58:13 +0000 (09:58 +0200)]
drm/ttm: remove TTM_MEMTYPE_FLAG_FIXED v2
Instead use a boolean field in the memory manager structure.
Also invert the meaning of the field since the use of a TT
structure is the special case here.
v2: cleanup zero init.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382079/
Christian König [Mon, 20 Jul 2020 12:41:31 +0000 (14:41 +0200)]
drm/ttm: initialize the system domain with defaults v2
Instead of repeating that in each driver.
v2: keep the caching limitation for VMWGFX for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/382078/
Paul Cercueil [Thu, 30 Jul 2020 14:48:30 +0000 (16:48 +0200)]
drm/ingenic: ipu: Only enable clock when needed
Instead of keeping the IPU clock enabled constantly, enable and disable
it on demand, when the IPU plane is used. That way, we won't use any
extra power when the IPU is not used.
v2: Explain the reason of this patch
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730144830.10479-4-paul@crapouillou.net
Paul Cercueil [Thu, 30 Jul 2020 14:48:29 +0000 (16:48 +0200)]
drm/ingenic: ipu: Remove YUV422 from supported formats on JZ4725B
When configuring the IPU for packed YUV 4:2:2, depending on the scaling
ratios given by the source and destination resolutions, it is possible
to crash the IPU block, to the point where a software reset of the IP
does not fix it. This can happen anytime, in the first few frames, or
after dozens of minutes. The same crash also happens when the IPU is
fully controlled by the LCD controller (in that case no HW register is
written at any moment after startup), which points towards a hardware
bug.
Thanksfully multiplanar YUV is not affected.
Until this bug is fixed or worked around, address this issue by removing
support for YUV 4:2:2 on the IPU of the JZ4725B.
v2: Update commit message (remove the "crash beyond repair" bit)
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730144830.10479-3-paul@crapouillou.net
Paul Cercueil [Thu, 30 Jul 2020 14:48:28 +0000 (16:48 +0200)]
drm/ingenic: ipu: Only restart manually on older SoCs
On older SoCs, it is necessary to restart manually the IPU when a frame
is done processing. Doing so on newer SoCs (JZ4760/70) kinds of work
too, until the input or output resolutions or the framerate are too
high.
Make it work properly on newer SoCs by letting the LCD controller
trigger the IPU frame restart signal.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730144830.10479-2-paul@crapouillou.net
Pekka Paalanen [Tue, 7 Jul 2020 11:38:05 +0000 (14:38 +0300)]
drm/doc: device hot-unplug for userspace
Set up the expectations on how hot-unplugging a DRM device should look like to
userspace.
Written by Daniel Vetter's request and largely based on his comments in IRC and
from https://lists.freedesktop.org/archives/dri-devel/2020-May/265484.html .
A related Wayland protocol change proposal is at
https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/35
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: Karol Herbst <kherbst@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707113805.30936-1-ppaalanen@gmail.com
Tian Tao [Tue, 28 Jul 2020 12:55:07 +0000 (20:55 +0800)]
drm/hisilicon: Fixed the warning: Assignment of 0/1 to bool variable
fixed the following warning:
hibmc_drm_drv.c:296:1-18:WARNING: Assignment of 0/1 to bool variable.
hibmc_drm_drv.c:301:2-19: WARNING: Assignment of 0/1 to bool variable.
v2:
using the pci_dev.msi_enabled instead of priv->msi_enabled.
v3:
just call pci_enable_msi() and pci_disable_msi(), it's no need to
set dev->pdev->msi_enabled again.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-By: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1595940907-17874-1-git-send-email-tiantao6@hisilicon.com
Paul Cercueil [Tue, 28 Jul 2020 15:16:41 +0000 (17:16 +0200)]
drm/ingenic: Validate mode in a .mode_valid callback
Validate modes in the drm_crtc_helper_funcs.mode_valid() callback, which
is designed for this purpose, instead of doing it in
drm_crtc_helper_funcs.atomic_check().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728151641.26124-3-paul@crapouillou.net
Paul Cercueil [Tue, 28 Jul 2020 15:16:40 +0000 (17:16 +0200)]
drm/ingenic: Handle errors of drm_atomic_get_plane_state
drm_atomic_get_plane_state() can return errors, so we need to handle
these.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728151641.26124-2-paul@crapouillou.net
Marek Vasut [Tue, 28 Jul 2020 12:12:46 +0000 (14:12 +0200)]
drm/panel: simple: Add Powertip PH800480T013 panel
Add support for Powertip PH800480T013 800x480 parallel LCD, this
one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728121246.23304-3-marex@denx.de
Marek Vasut [Tue, 28 Jul 2020 12:12:45 +0000 (14:12 +0200)]
dt-bindings: Add DT bindings for Powertip PH800480T013
Add DT bindings for Powertip PH800480T013 800x480 parallel LCD,
this one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728121246.23304-2-marex@denx.de
Marek Vasut [Tue, 28 Jul 2020 12:12:44 +0000 (14:12 +0200)]
dt-bindings: Add vendor prefix for Powertip
The Powertip Tech. Corp. is an LCD panel manufacturer.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728121246.23304-1-marex@denx.de
Laurent Pinchart [Mon, 27 Jul 2020 02:06:54 +0000 (05:06 +0300)]
drm: mxsfb: Support the alpha plane
The LCDIF in the i.MX6SX and i.MX7 have a second plane called the alpha
plane. Support it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-23-laurent.pinchart@ideasonboard.com
Laurent Pinchart [Mon, 27 Jul 2020 02:06:53 +0000 (05:06 +0300)]
drm: mxsfb: Remove unnecessary spaces after tab
This is a cosmetic change only, no code change is included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-22-laurent.pinchart@ideasonboard.com