OSDN Git Service
Paul Hsieh [Tue, 7 Apr 2020 09:18:47 +0000 (17:18 +0800)]
drm/amd/display: dmcu wait loop calculation is incorrect in RV
[Why]
Driver already get display clock from SMU base on MHz, but driver read
again and mutiple 1000 cause wait loop value is overflow.
[How]
remove coding error
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sat, 28 Mar 2020 05:44:14 +0000 (01:44 -0400)]
drm/amd/display: move panel power seq to new panel struct
[Why]
panel power sequencer is currently just sitting in hwseq but it really
it tied to internal panels
[How]
make a new panel struct to contain power sequencer code
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Fri, 27 Mar 2020 22:23:16 +0000 (18:23 -0400)]
drm/amd/display: make all backlight calls link based
[Why]
Backlight adjustment is tied to a specific display. So make the calls
target a link rather than making it a global state.
[How]
make all backlight calls link based
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Wed, 25 Mar 2020 18:44:25 +0000 (14:44 -0400)]
drm/amd/display: Cap certain DML values for Low Pix Clk on DCN2.1
[WHY]
In certain conditions with low pixel clock, some values in DML may go
past the max due to margining for latency hiding. This causes assertions
to get hit.
[HOW]
If the pixel clock is low and some values are high, cap it to the max.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Sun, 5 Apr 2020 17:48:56 +0000 (13:48 -0400)]
drm/amd/display: Various fixes for PSR on DMCUB
[Why]
- Driver does not recognize new definitions of psr states.
- Internal tool is required for checking if psr is active.
[How]
- Parse psr state correctly so that driver will recognize psr state.
- Add visual confirmation that psr is active using existing mechanisms.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 6 Apr 2020 04:22:52 +0000 (00:22 -0400)]
drm/amd/display: 3.2.81
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 5 Apr 2020 19:35:16 +0000 (15:35 -0400)]
drm/amd/display: Update MPCC if requested
Don't skip MPCC tree updates if requested.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Fri, 3 Apr 2020 20:33:56 +0000 (16:33 -0400)]
drm/amd/display: Fix HDR visual confirm
Some cases were incorrectly reporting the wrong visual confirm, even
though they were working as expected.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 31 Mar 2020 20:50:12 +0000 (16:50 -0400)]
drm/amd/display: Use the correct input TF for video formats
[Why]
Color blending for NV12 formats is incorrect because we're using the
predefined SRGB degamma.
[How]
Calculate the correct input transfer function for degamma from the color
module depending on what the actual surface format is.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Haiyi Zhou [Fri, 3 Apr 2020 14:00:58 +0000 (10:00 -0400)]
drm/amd/display: Change infopacket type programming
[Why]
Certain displays may experience blanking if infopacket max range does
not equal nominal refresh rate.
[How]
Add additional infopacket versions to program range to full or forced
range in freesync states.
This does not change the vrr logic.
Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 2 Apr 2020 19:59:44 +0000 (15:59 -0400)]
drm/amd/display: Avoid NULL pointer in set_backlight when ABM is NULL
[Why]
On ASIC without ABM support (most dGPU) we run into a null pointer
dereference when attempting to set the backlight level.
[How]
This function requires ABM, so fix up the condition to only allow
DMCU to be optional.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Thu, 2 Apr 2020 13:31:45 +0000 (09:31 -0400)]
drm/amd/display: fix stream setting for diags on silicon
We need to set up stream even with virtual displays when running
diags.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Mon, 30 Mar 2020 21:16:23 +0000 (17:16 -0400)]
drm/amd/display: Cast int to float before division
[Why]:
Some inputs to dml_ceil have it dividied by int which causes a
truncation. This loss of precision means the ceil function becomes
redundant and does not round up.
[How]:
Cast parameter to float before division.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Mon, 30 Mar 2020 21:19:01 +0000 (17:19 -0400)]
drm/amd/display: Set meta_chunk_value to 0 in DML if DCC disabled in DCN2.1
[WHY]:
Calculating refcyc_per_meta_chunk_vblank_l when DCC is disabled may lead
to a large number causing an assert to get hit. In VBA, this value is 0
when DCC is disabled.
[HOW]:
Set value to 0 to avoid hitting the assert.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Tue, 31 Mar 2020 16:32:53 +0000 (12:32 -0400)]
drm/amd/display: add optc get crc support for timings with ODM/DSC
[why]
Optc needs to know if timing is enabled with ODM or DSC before computing
crc. Otherwise value computed will be inaccurate. Before this change,
the CRC computed without ODM is not equal to the CRC computed with ODM
for the same timing. This is unexpected as we are driving the same
timing despite of the underlaying hardware setup to achieve it. This is
caused by missing hardware programming sequence to support it.
[how]
Add the new programming sequence based on hardware guide.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jinze Xu [Wed, 25 Mar 2020 08:14:35 +0000 (16:14 +0800)]
drm/amd/display: Workaround to disable YCbCr
[Why]
Some mst dock can't translate DP to HDMI properly.
[How]
Bypass YCbCr timings on specific MST device.
Signed-off-by: Jinze Xu <jinze.xu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 31 Mar 2020 20:45:31 +0000 (16:45 -0400)]
drm/amd/display: Check ramp != NULL before applying lut1d for degamma
[Why]
A NULL ramp is a valid configuration for passing into
mod_color_calculate_degamma_params but we'll hit a NULL pointer if we do
so.
We need this in order to get the right transfer function to do degamma
on NV12 formats where we aren't supplied with a custom user degamma.
[How]
Add the NULL check.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Tue, 31 Mar 2020 13:31:16 +0000 (09:31 -0400)]
drm/amd/display: Unify psr feature flags
[Why]
As it stands, psr has feature flags in dm, stream, and link. Most are
not defined well enough, and different dm layers have different uses for
these same flags.
[How]
We define a new structure called psr_settings in dc_link that will hold
the following psr feature flags:
psr_feature_enable - psr is supported
psr_allow_active - psr is currently active
psr_version - internal psr version supported
psr_frame_capture_indication_req
psr_sdp_transmit_line_num_deadline
The last two flags were moved out of the power module
for the purposes of consolidating psr flags.
Their use is already well-defined.
Psr caps reported by sink will also be stored in dc_link,
in dpcd_caps.psr_caps.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stylon Wang [Thu, 26 Mar 2020 15:19:44 +0000 (23:19 +0800)]
drm/amd/display: Support plane-level gamut remap in DM
[Why]
Plane-level gamut remap is not enabled in DM, which is necessary to
support CTM as a plane-level property.
[How]
Enable gamut remap in DM.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Mon, 30 Mar 2020 13:04:05 +0000 (09:04 -0400)]
drm/amd/display: Add SetBacklight call to abm on dmcub
[Why]
Set backlight calls to firmware are are being prevented by dmcu == null
check. Dmcu is expected to be null in this case.
[How]
Only prevent call if dmcu and abm are null. Also rename variable
'use_smooth_brightness' to 'fw_set_brightness' as it's more appropriate.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Mon, 30 Mar 2020 13:58:29 +0000 (09:58 -0400)]
drm/amd/display: Remove byte swapping for dmcub abm config table
[Why]
Since x86 and dmcub are both little endian, byte swapping isn't
necessary. Dmcu requires byte swapping as it is big endian.
[How]
Add flag to function definitions to determine if byte swapping is
necessary.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Aberback [Mon, 30 Mar 2020 19:49:02 +0000 (15:49 -0400)]
drm/amd/display: Force watermark value propagation
[Why]
The HUBBUB watermark registers are in an area that cannot be power
gated, but the HUBP copies of the watermark values are in areas that can
be power gated. When we power on a pipe, it will not automatically take
the HUBBUB values, we need to force propagation by writing to a
watermark register.
[How]
- new HUBBUB function to re-write current value in a WM register
- touch WM register after enabling the plane in program_pipe
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Mon, 30 Mar 2020 13:08:04 +0000 (09:08 -0400)]
drm/amd/display: Move enable fractional pwm call
[Why]
Dmcu init fw call has some logic to initialize abm values. Since this
doesn't exist on dmcub, must find a proper place for it in the abm
sequence.
[How]
Move enable fractional pwm call.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Mon, 30 Mar 2020 13:11:09 +0000 (09:11 -0400)]
drm/amd/display: Add user backlight level reg write
[Why]
Porting abm from dmcu to dmcub missed one register write.
[How]
Add this register write in the SetBacklightLevel sequence.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dale Zhao [Fri, 27 Mar 2020 12:11:55 +0000 (20:11 +0800)]
drm/amd/display: Correct updating logic of dcn21's pipe VM flags
[Why]:
Renoir's pipe VM flags are not correctly updated if pipe strategy has
changed during some scenarios. It will result in watermarks mistakenly
calculation, thus underflow and garbage appear.
[How]:
Correctly update pipe VM flags to pipes which have been populated.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhan Liu [Thu, 16 Apr 2020 18:20:56 +0000 (14:20 -0400)]
drm/amd/display: Remove aconnector condition check for dpcd read
[Why]
Aconnector is not necessary to be NULL in order to read dpcd
successfully.
Actually if we rely on checking aconnector here, we won't be able
to turn off all displays before doing display detection. That will
cause some MST hubs not able to light up.
[How]
Remove aconnector check when turning off all displays at
hardware initialization stage.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Joseph Gravenor <joseph.gravenor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YueHaibing [Fri, 17 Apr 2020 10:12:47 +0000 (18:12 +0800)]
drm/amd/dc: remove unused variable 'video_optimized_pixel_rates'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1017:50:
warning: ‘video_optimized_pixel_rates’ defined but not used [-Wunused-const-variable=]
static const struct pixel_rate_range_table_entry video_optimized_pixel_rates[] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
commit
d8cd587d2bfd ("drm/amd/display: removing MODULO change for dcn2")
left behind this unused vairable, remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jason Yan [Fri, 17 Apr 2020 07:32:19 +0000 (15:32 +0800)]
drm/amd/powerplay: remove defined but not used variables
Fix the following gcc warning:
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:710:46:
warning: ‘PSMGCEDCThresholdConfig_vega10’ defined but not used
[-Wunused-const-variable=]
static const struct vega10_didt_config_reg
PSMGCEDCThresholdConfig_vega10[] =
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:654:46:
warning: ‘PSMSEEDCThresholdConfig_Vega10’ defined but not used
[-Wunused-const-variable=]
static const struct vega10_didt_config_reg
PSMSEEDCThresholdConfig_Vega10[] =
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Tue, 17 Mar 2020 19:43:41 +0000 (15:43 -0400)]
drm/amdgpu: fix race between pstate and remote buffer map
Vega20 arbitrates pstate at hive level and not device level. Last peer to
remote buffer unmap could drop P-State while another process is still
remote buffer mapped.
With this fix, P-States still needs to be disabled for now as SMU bug
was discovered on synchronous P2P transfers. This should be fixed in the
next FW update.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2020 18:44:52 +0000 (14:44 -0400)]
drm/amdgpu/display: give aux i2c buses more meaningful names
Mirror what we do for i2c display buses.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 16 Apr 2020 18:20:58 +0000 (14:20 -0400)]
drm/amdgpu/display: fix aux registration (v2)
We were registering the aux device in the MST late_register
rather than the regular one.
v2: handle eDP as well
Fixes:
405a1f9090d1ac ("drm/amdgpu/display: split dp connector registration (v4)")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1100
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Sandeep Raghuraman [Thu, 16 Apr 2020 20:07:45 +0000 (01:37 +0530)]
drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)
Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Sat, 11 Apr 2020 12:41:52 +0000 (08:41 -0400)]
Revert "drm/amdgpu: Disable gfx off if VCN is busy"
This reverts commit
3fded222f4bf7f4c56ef4854872a39a4de08f7a8
This is work around for vcn1 only. Currently vcn1 has separate
begin_use and idle work handle.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Tested-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Thu, 16 Apr 2020 15:41:07 +0000 (23:41 +0800)]
drm/amdgpu: fix kernel page fault issue by ras recovery on sGPU
When running ras uncorrectable error injection and triggering GPU
reset on sGPU, below issue is observed. It's caused by the list
uninitialized when accessing.
[ 80.047227] BUG: unable to handle page fault for address:
ffffffffc0f4f750
[ 80.047300] #PF: supervisor write access in kernel mode
[ 80.047351] #PF: error_code(0x0003) - permissions violation
[ 80.047404] PGD
12c20e067 P4D
12c20e067 PUD
12c210067 PMD
41c4ee067 PTE
404316061
[ 80.047477] Oops: 0003 [#1] SMP PTI
[ 80.047516] CPU: 7 PID: 377 Comm: kworker/7:2 Tainted: G OE 5.4.0-rc7-guchchen #1
[ 80.047594] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
[ 80.047888] Workqueue: events amdgpu_ras_do_recovery [amdgpu]
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Thu, 16 Apr 2020 12:22:28 +0000 (08:22 -0400)]
drm/amdgpu: Disable FRU read on Arcturus
Update the list with supported Arcturus chips, but disable for now until
final list is confirmed.
Ideally we can poll atombios for FRU support, instead of maintaining
this list of chips, but this will enable serial number reading for
supported ASICs for the time-being.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Wed, 15 Apr 2020 13:43:41 +0000 (21:43 +0800)]
drm/amd/powerplay: fix resume failed as smu table initialize early exit
When the amdgpu in the suspend/resume loop need notify the dpm disabled,
otherwise the smu table will be uninitialize and result in resume failed.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rajneesh Bhardwaj [Sun, 5 Apr 2020 19:22:07 +0000 (15:22 -0400)]
drm/amdgpu/gmc: Fix spelling mistake.
Fixes a minor typo in the file.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Wed, 15 Apr 2020 02:57:33 +0000 (10:57 +0800)]
drm/amdgpu: cache smu fw version info
reduce cmd submission to smu by caching version info
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Mon, 13 Apr 2020 18:15:44 +0000 (14:15 -0400)]
Revert "drm/amdgpu: use the BAR if possible in amdgpu_device_vram_access v2"
This reverts commit
c12b84d6e0d70f1185e6daddfd12afb671791b6e.
The original patch causes a RAS event and subsequent kernel hard-hang
when running the KFDMemoryTest.PtraceAccessInvisibleVram on VG20 and
Arcturus
dmesg output at hang time:
[drm] RAS event of type ERREVENT_ATHUB_INTERRUPT detected!
amdgpu 0000:67:00.0: GPU reset begin!
Evicting PASID 0x8000 queues
Started evicting pasid 0x8000
qcm fence wait loop timeout expired
The cp might be in an unrecoverable state due to an unsuccessful queues preemption
Failed to evict process queues
Failed to suspend process 0x8000
Finished evicting pasid 0x8000
Started restoring pasid 0x8000
Finished restoring pasid 0x8000
[drm] UVD VCPU state may lost due to RAS ERREVENT_ATHUB_INTERRUPT
amdgpu: [powerplay] Failed to send message 0x26, response 0x0
amdgpu: [powerplay] Failed to set soft min gfxclk !
amdgpu: [powerplay] Failed to upload DPM Bootup Levels!
amdgpu: [powerplay] Failed to send message 0x7, response 0x0
amdgpu: [powerplay] [DisableAllSMUFeatures] Failed to disable all smu features!
amdgpu: [powerplay] [DisableDpmTasks] Failed to disable all smu features!
amdgpu: [powerplay] [PowerOffAsic] Failed to disable DPM!
[drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <powerplay> failed -5
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Apr 2020 13:40:01 +0000 (09:40 -0400)]
drm/amdgpu/gfx9: add gfxoff quirk
Fix screen corruption with firefox.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207171
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Tue, 14 Apr 2020 07:22:29 +0000 (15:22 +0800)]
drm/amdgpu: set mp1 state before reload
Set MP1 state to prepare for unload before reloading SMU FW
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Tue, 14 Apr 2020 07:21:35 +0000 (15:21 +0800)]
drm/amdgpu: update psp fw loading sequence
Added dedicated function to check if particular fw should be skipped from loading.
Added dedicated function for SMU FW loading via PSP
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 13 Apr 2020 10:49:50 +0000 (18:49 +0800)]
drm/amd/powerplay: update Arcturus smu-driver if header
To fit the latest PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Apr 2020 06:37:42 +0000 (14:37 +0800)]
drm/amd/powerplay: properly set the dpm_enabled state
On the ASIC powered down(in baco or system suspend),
the dpm_enabled will be set as false. Then all access
(e.g. df state setting issued on RAS error event) to
SMU will be blocked.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 13 Apr 2020 05:26:22 +0000 (13:26 +0800)]
drm/amd/powerplay: correct i2c eeprom init/fini sequence
As data transfer may starts immediately after i2c eeprom init
completed. Thus i2c eeprom should be initialized after SMU
ready. And i2c data transfer should be prohibited when SMU
down. That is the i2c eeprom fini sequence needs to be
updated also.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 6 Mar 2020 10:08:41 +0000 (18:08 +0800)]
drm/amd/powerplay: bump the NAVI10 smu-driver if version
To fit the latest SMC firmware 42.53 and eliminate the
warning on driver loading.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 6 Mar 2020 09:54:44 +0000 (17:54 +0800)]
drm/amd/powerplay: revise the way to retrieve the board parameters
It can support different NV1x ASIC better. And this can guard
no member got missing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Mon, 13 Apr 2020 13:41:14 +0000 (21:41 +0800)]
drm/amdgpu: fix the hw hang during perform system reboot and reset
The system reboot failed as some IP blocks enter power gate before perform
hw resource destory. Meanwhile use unify interface to set device CGPG to ungate
state can simplify the amdgpu poweroff or reset ungate guard.
Fixes:
487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Fri, 10 Apr 2020 11:46:13 +0000 (12:46 +0100)]
drm/amd/display: remove redundant assignment to variable dp_ref_clk_khz
The variable dp_ref_clk_khz is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jason Yan [Mon, 13 Apr 2020 14:33:00 +0000 (22:33 +0800)]
drm/radeon: remove defined but not used variables in ci_dpm.c
Fix the following gcc warning:
drivers/gpu/drm/radeon/ci_dpm.c:82:36: warning: ‘defaults_saturn_pro’
defined but not used [-Wunused-const-variable=]
static const struct ci_pt_defaults defaults_saturn_pro =
^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:68:36: warning: ‘defaults_bonaire_pro’
defined but not used [-Wunused-const-variable=]
static const struct ci_pt_defaults defaults_bonaire_pro =
^~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jason Yan [Mon, 13 Apr 2020 14:32:45 +0000 (22:32 +0800)]
drm/radeon: remove defined but not used 'dte_data_tahiti_le'
Fix the following gcc warning:
drivers/gpu/drm/radeon/si_dpm.c:255:33: warning: ‘dte_data_tahiti_le’
defined but not used [-Wunused-const-variable=]
static const struct si_dte_data dte_data_tahiti_le =
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jason Yan [Mon, 13 Apr 2020 14:32:35 +0000 (22:32 +0800)]
drm/amdgpu: remove dead code in si_dpm.c
This code is dead, let's remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 9 Apr 2020 01:28:15 +0000 (21:28 -0400)]
drm/amd/amdgpu: remove hardcoded module name in prints
Let format prefixes take care of printing the module name
through pr_fmt and dev_fmt definitions.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 9 Apr 2020 01:28:14 +0000 (21:28 -0400)]
drm/amd/amdgpu: add print prefix for dev_* variants
Define dev_fmt macro for informative print messages
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 9 Apr 2020 01:28:13 +0000 (21:28 -0400)]
drm/amd/amdgpu: add prefix for pr_* prints
amdgpu uses lots of pr_* calls for printing error messages.
With this prefix, errors shall be more obvious to the end
use regarding its origin, and may help debugging.
Prefix format:
[xxx.xxxxx] amdgpu: ...
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jason Yan [Mon, 13 Apr 2020 08:22:49 +0000 (16:22 +0800)]
drm/amd/display: code clean up in dce80_hw_sequencer.c
Fix the following gcc warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_hw_sequencer.c:43:46:
warning: ‘reg_offsets’ defined but not used [-Wunused-const-variable=]
static const struct dce80_hw_seq_reg_offsets reg_offsets[] = {
^~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Apr 2020 20:04:39 +0000 (16:04 -0400)]
drm/amdgpu/ring: simplify scheduler setup logic
Set up a GPU scheduler based on the ring flag rather
than the ring type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Apr 2020 20:02:36 +0000 (16:02 -0400)]
drm/amdgpu/kiq: add no_scheduler flag to KIQ
We don't want a GPU scheduler for this ring.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 9 Apr 2020 19:56:05 +0000 (15:56 -0400)]
drm/amdgpu/ring: add no_scheduler flag
This allows IPs to flag whether a specific ring requires
a GPU scheduler or not. E.g., sometimes instances of an
IP are asymmetric and have different capabilities.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Mon, 16 Sep 2019 03:37:42 +0000 (11:37 +0800)]
drm/amdgpu/powerplay: get SMC FW size to a flexible way
Get SMC fw size before backdoor loading instead of giving an
certain value, as it may different for different ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 10 Apr 2020 07:38:44 +0000 (15:38 +0800)]
drm/amdgpu: fix wrong vram lost counter increment V2
Vram lost counter is wrongly increased by two during baco reset.
V2: assumed vram lost for mode1 reset on all ASICs
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Mon, 13 Apr 2020 06:39:09 +0000 (14:39 +0800)]
drm/amdgpu: replace DRM prefix with PCI device info for GFX RAS
Prefix RAS message printing in GFX IP with PCI device info,
which assists the debug in multiple GPU case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Mon, 13 Apr 2020 06:31:27 +0000 (14:31 +0800)]
drm/amdgpu: resume kiq access debugfs
If there is no GPU hang, user still can access
debugfs through kiq.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Monk Liu <Monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Fri, 10 Apr 2020 07:51:14 +0000 (15:51 +0800)]
drm/amdgpu: refine ras related message print
Prefix ras related kernel message logging with PCI
device info by replacing DRM_INFO/WARN/ERROR with
dev_info/warn/err. This can clearly tell user about
GPU device information where ras is. And add some
other ras message printing to make it more clear
and friendly as well.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Fri, 10 Apr 2020 03:41:54 +0000 (11:41 +0800)]
drm/amdgpu: add uncorrectable error count print in UMC ecc irq cb
Uncorrectable error count printing is missed when issuing UMC
UE injection. When going to the error count log function in GPU
recover work thread, there is no chance to get correct error count
value by last error injection and print, because the error status
register is automatically cleared after reading in UMC ecc irq
callback. So add such message printing in UMC ecc irq cb to be
consistent with other RAS error interrupt cases.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sergei Lopatin [Wed, 26 Jun 2019 09:56:59 +0000 (14:56 +0500)]
drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled
Should prevent flicker if PP_OVERDRIVE_MASK is set.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646
bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628
Signed-off-by: Sergei Lopatin <magist3r@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhan Liu [Thu, 9 Apr 2020 19:32:44 +0000 (15:32 -0400)]
drm/amd/display: Change "error" to "dc_log" at amdgpu_dm dpcd reading stage
[Why]
If reading dpcd happens ahead of hw initialization, then aconnector is NULL
at this point. This is expected, so there is no need to output an error (which will
spam dmesg.log)
[How]
Change type of message from "error" to "DC_LOG_DC".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Tue, 7 Apr 2020 10:08:39 +0000 (18:08 +0800)]
drm/amdgpu: restrict debugfs register access under SR-IOV
Under bare metal, there is no more else to take
care of the GPU register access through MMIO.
Under Virtualization, to access GPU register is
implemented through KIQ during run-time due to
world-switch.
Therefore, under SR-IOV user can only access
debugfs to r/w GPU registers when meets all
three conditions below.
- amdgpu_gpu_recovery=0
- TDR happened
- in_gpu_reset=0
v2: merge amdgpu_virt_can_access_debugfs() into
amdgpu_virt_enable_access_debugfs()
v3: drop ret variable in amdgpu_virt_enable_access_debugfs()
and directly return result
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 9 Apr 2020 07:32:41 +0000 (15:32 +0800)]
drm/amdgpu: increased atom cmd timeout
added macro to define timeout
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 24 Mar 2020 08:22:19 +0000 (16:22 +0800)]
drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset
This sequence is recommended by PMFW team for the baco reset
with PMFW reloaded. And it seems able to address the random
failure seen on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Tue, 7 Apr 2020 18:26:18 +0000 (14:26 -0400)]
amdgpu_kms: Remove unnecessary condition check
Execution will only reach here if the asserted condition is true.
Hence there is no need for the additional check.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 8 Apr 2020 13:30:11 +0000 (09:30 -0400)]
drm/amdgpu/display: fix warning when compiling without debugfs
fixes unused variable warning.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aaron Liu [Tue, 7 Apr 2020 09:46:04 +0000 (17:46 +0800)]
drm/amdgpu: unify fw_write_wait for new gfx9 asics
Make the fw_write_wait default case true since presumably all new
gfx9 asics will have updated firmware. That is using unique WAIT_REG_MEM
packet with opration=1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Yuxian Dai <Yuxian.Dai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Wed, 8 Apr 2020 08:18:52 +0000 (16:18 +0800)]
drm/amdgpu: support access regs outside of mmio bar
add indirect access support to registers outside of
mmio bar.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Fri, 3 Apr 2020 09:58:06 +0000 (17:58 +0800)]
drm/amdgpu: retire AMDGPU_REGS_KIQ flag
all the register access through kiq is redirected
to amdgpu_kiq_rreg/amdgpu_kiq_wreg
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Fri, 3 Apr 2020 09:51:42 +0000 (17:51 +0800)]
drm/amdgpu: retire RREG32_IDX/WREG32_IDX
those are not needed anymore
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Fri, 3 Apr 2020 09:37:39 +0000 (17:37 +0800)]
drm/amdgpu: retire indirect mmio reg support from cgs
not needed anymore
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Fri, 3 Apr 2020 09:30:00 +0000 (17:30 +0800)]
drm/amdgpu: replace indirect mmio access in non-dc code path
all the mmCUR_CONTROL instances are in mmr range and
can be accessd directly by using RREG32/WREG32
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Fri, 3 Apr 2020 08:40:35 +0000 (16:40 +0800)]
drm/amdgpu: remove inproper workaround for vega10
the workaround is not needed for soc15 ASICs except
for vega10. it is even not needed with latest vega10
vbios.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 3 Apr 2020 05:19:14 +0000 (13:19 +0800)]
drm/amd/powerplay: error out on forcing clock setting not supported
For Arcturus, forcing clock to some specific level is not supported
with 54.18 and onwards SMU firmware. As according to firmware team,
they adopt new gfx dpm tuned parameters which can cover all the use
case in a much smooth way. Thus setting through driver interface
is not needed and maybe do a disservice.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Tue, 7 Apr 2020 12:21:26 +0000 (20:21 +0800)]
drm/amdgpu: fix gfx hang during suspend with video playback (v2)
The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.
v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Mon, 24 Feb 2020 19:55:53 +0000 (14:55 -0500)]
drm/amd/display: add HDCP caps debugfs
Add debugfs to get HDCP capability. This is also useful for
kms_content_protection igt test.
Use:
cat /sys/kernel/debug/dri/0/DP-1/hdcp_sink_capability
cat /sys/kernel/debug/dri/0/HDMI-A-1/hdcp_sink_capability
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Wed, 1 Apr 2020 19:07:26 +0000 (15:07 -0400)]
drm/amd/display: query hdcp capability during link detect
[Why]
Query the hdcp caps of a link, it is useful and can be reported to the user
[How]
Create a query function and call it during link detect
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Fri, 3 Apr 2020 14:42:21 +0000 (10:42 -0400)]
drm/amdgpu: Re-enable FRU check for most models v5
There is at least 1 VG20 DID that does not have an FRU, and trying to read
that will cause a hang. For now, explicitly support reading the FRU for
Arcturus and for the WKS VG20 DIDs, and skip for everything else.
This re-enables serial number reporting for server cards
v2: Add ASIC check
v3: Don't default to true for pre-VG20
v4: Use DID instead of parsing the VBIOS
v5: Sqaush in overflow warning fix
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 5 Apr 2020 20:41:15 +0000 (16:41 -0400)]
drm/amd/display: 3.2.80
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Sun, 5 Apr 2020 20:41:14 +0000 (16:41 -0400)]
drm/amd/display: Make DMCUB bss/data firmware blob optional
[Why]
By moving everything out of .data into the other regions we can drop
the requirement for the second blob and unify it all into the inst/const
blob.
[How]
We need to still support the blob being there and not being there for
backwards compatibility.
Look for the DMCUB metadata section in the end of the inst/const blob
instead of bss/data is missing.
Clear CW2 if we don't have the data blob so we don't hang when
transitioning between data blob/blobless firmwares.
Don't memcpy the blob into CW2 region if it doesn't exist.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Sun, 5 Apr 2020 20:41:13 +0000 (16:41 -0400)]
drm/amd/display: determine USB C DP2 mode only when USB DP Alt is enabled
[why]
When display is connected with a native DP port, DP2 mode register value
is a don't care. Driver mistakenly reduce max supported lane count to 2
lane based on the don't care value.
[how]
Add additional check only if USB C DP alt mode is enabled, we will
determine max lane count supported based on current mode.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Sun, 5 Apr 2020 20:41:12 +0000 (16:41 -0400)]
drm/amd/display: Check for null fclk voltage when parsing clock table
[WHY]
In cases where a clock table is malformed such that fclk entries have
frequencies but not voltages listed, we don't catch the error and set
clocks to 0 instead of using hardcoded values as we should.
[HOW]
Add check for clock tables fclk entry's voltage as well
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Aberback [Sun, 5 Apr 2020 20:41:11 +0000 (16:41 -0400)]
drm/amd/display: Acknowledge wm_optimized_required
[Why]
If dc->clk_mgr->funcs->are_clock_states_equal is set, then
wm_optimized_required is never checked. In that case, when going from a
higher mode to a lower mode, wm_optimized_required remains true until
the next mode change.
[How]
- move from else-if to unconditional or
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jaehyun Chung [Sun, 5 Apr 2020 20:41:10 +0000 (16:41 -0400)]
drm/amd/display: Update DRAM watermark before checking to update TTU
[Why]
In most cases, DRAM watermark is large enough that the result of the
condition to increase TTU doesn't change after DRAM watermark is
increased. However, there is are cases where the condition fails and
becomes true after DRAM watermark is increased. This results in minTTU <
DRAM watermarks which leads to PSR hang since p-state is requested but
not allowed.
[How]
Check whether to update TTU after DRAM watermark is updated.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jerry (Fangzhi) Zuo [Sun, 5 Apr 2020 20:41:09 +0000 (16:41 -0400)]
drm/amd/display: Avoid create MST prop after registration
[Why]
Prop are created at boot stage, and not allowed to create new prop
after device registration.
[How]
Reuse the connector property from SST if exist.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Sun, 5 Apr 2020 20:41:08 +0000 (16:41 -0400)]
drm/amd/display: Make cursor source translation adjustment optional
[Why]
In some usecases, like tiled display, the stream and plane configuration
can be setup in a way where the caller expects DAL to perform the
clipping, eg:
P0:
src_rect(0, 0, w, h)
dst_rect(0, 0, w, h)
P1:
src_rect(w, 0, w, h)
dst_rect(0, 0, w, h)
Cursor is enabled on both streams with the same position.
This can result in double cursor on tiled display, even though this
behavior is technically correct from the DC interface point of view.
We need a mechanism to control this dynamically.
[How]
This is something that should live in the DM layer based on detection
of the specified configuration but it's not something that we really
have enough information to deal with today.
Add a flag to the cursor position state that specifies whether we
want DC to do the translation or not and make it opt-in and let
the DM decide when to do it.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Sun, 5 Apr 2020 20:41:05 +0000 (16:41 -0400)]
drm/amd/display: Revert to old formula in set_vtg_params
[Why]
New formula + cursor change causing underflow
on certain configs
[How]
Rever to old formula
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stylon Wang [Sun, 5 Apr 2020 20:41:04 +0000 (16:41 -0400)]
drm/amd/display: Refactor color management to take dm plane state
[Why]
- In amdgpu_dm_update_plane_color_mgmt() it is inconsistent in taking in
dm_crtc_state and dc_plane_state.
- Makes supporting plane-level color management with proper guard more
complicated than necessary.
[How]
Pass in dm_plane_state in place of dc_plane_state in
amdgpu_dm_update_plane_color_mgmt().
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Sun, 5 Apr 2020 20:41:03 +0000 (16:41 -0400)]
drm/amd/display: initialize get_max_link_cap
[why]
usb3->usb2 switch system hang.
driver needs to limit the max sink cap based on DP4 mode.
[how]
based on s_dpalt check and DP4 check:
limit the USB-C DPALT DP maximum supported lane count.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Sun, 5 Apr 2020 20:41:02 +0000 (16:41 -0400)]
drm/amd/display: fix dml pipe merge logic
Dml merges mpc/odm combine pipes to do calculations. This merge is
imperfect if there is a viewport overlap. This change saves pre overlap
viewport for dml use.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Isabel Zhang [Sun, 5 Apr 2020 20:41:01 +0000 (16:41 -0400)]
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
[Why]
After v_total_min and max are updated in vrr structure, the changes are
not reflected in stream adjust. When these values are read from stream
adjust it does not reflect the actual state of the system.
[How]
Set stream adjust values equal to vrr adjust values after vrr adjust
values are updated.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 5 Apr 2020 20:41:00 +0000 (16:41 -0400)]
drm/amd/display: 3.2.79
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Sun, 5 Apr 2020 20:40:59 +0000 (16:40 -0400)]
drm/amd/display: Remove unused defines
[Why]
Defines aren't used. Remove them.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Sun, 5 Apr 2020 20:40:57 +0000 (16:40 -0400)]
drm/amd/display: Calculate scaling ratios on every medium/full update
[Why]
If a plane isn't being actively enabled or disabled then DC won't
always recalculate scaling rects and ratios for the primary plane.
This results in only a partial or corrupted rect being displayed on
the screen instead of scaling to fit the screen.
[How]
Add back the logic to recalculate the scaling rects into
dc_commit_updates_for_stream since this is the expected place to
do it in DC.
This was previously removed a few years ago to fix an underscan issue
but underscan is still functional now with this change - and it should
be, since this is only updating to the latest plane state getting passed
in.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>