OSDN Git Service
Emil Velikov [Sat, 22 Aug 2015 10:04:11 +0000 (11:04 +0100)]
docs: add news item and link release notes for 10.6.5
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Sat, 22 Aug 2015 10:00:47 +0000 (11:00 +0100)]
docs: add sha256 checksums for 10.6.5
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit
fa34225167396008e75e93f23696666caba8a7bf)
Emil Velikov [Sat, 22 Aug 2015 09:20:54 +0000 (10:20 +0100)]
docs: add release notes for 10.6.5
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit
a43b3dd99bd4c114d0f3e90f4fd4792164fe7539)
Chris Wilson [Fri, 21 Aug 2015 14:28:22 +0000 (15:28 +0100)]
i965: Move control flush into pipelined conditional render
The nv_conditional_render piglits were sporadically failing. Moving
the control flush from the write and placing it just before the read
was sufficient to make the piglits pass a 1000/1000 times. The bspec
says that the flush enable bit "waits until all previous writes of
immediate data from post sync circles are complete before executing the
next command" - the operative word being previous!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90691
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Neil Roberts <neil@linux.intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Eric Anholt [Fri, 21 Aug 2015 17:57:24 +0000 (10:57 -0700)]
vc4: Actually allow math results to allocate into r4.
I switched us to tracking whether the results *could* go to r4, but then
didn't make a separate register class for the class bits that included r4.
Switch the "any" class to actually be "any", and name the "any but r4"
class more appropriately.
total instructions in shared programs: 96798 -> 94680 (-2.19%)
instructions in affected programs: 62736 -> 60618 (-3.38%)
Eric Anholt [Fri, 21 Aug 2015 07:08:13 +0000 (00:08 -0700)]
vc4: Fold the 16-bit integer pack into the instructions generating it.
total instructions in shared programs: 97580 -> 96798 (-0.80%)
instructions in affected programs: 52826 -> 52044 (-1.48%)
Eric Anholt [Fri, 21 Aug 2015 07:04:36 +0000 (00:04 -0700)]
vc4: Reuse QPU dumping for packing bits in QIR.
Eric Anholt [Wed, 19 Aug 2015 03:26:05 +0000 (20:26 -0700)]
vc4: Make _dest variants of qir ALU helpers to provide an explicit dest.
Eric Anholt [Fri, 21 Aug 2015 16:22:32 +0000 (09:22 -0700)]
vc4: Use the SSA defs list for figuring out eligible MOVs for copy prop.
I thought I'd converted this over previously. It was copy propagating
MOVs badly with the new destination packing flags.
Krzysztof Sobiecki [Thu, 20 Aug 2015 21:19:30 +0000 (23:19 +0200)]
st/nine: Always use user constant buffers
We had several reports of users hitting bugs
with the other path to upload constants,
and switching to the user constant buffer
path solves the bugs.
User constant buffers are expected to be slower
for Nvidia cards, so ideally this patch should be
reverted when the path is fixed.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Krzysztof Sobiecki <sobkas@gmail.com>
Axel Davy [Sun, 16 Aug 2015 11:11:50 +0000 (13:11 +0200)]
st/nine: Silent warning in nine_ff
release build was complaining
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 16 Aug 2015 11:11:27 +0000 (13:11 +0200)]
st/nine: Silent warning in sm1_declusage_to_tgsi
release build was complaining
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 16 Aug 2015 10:58:41 +0000 (12:58 +0200)]
st/nine: Silent warning in NineCubeTexture9_ctor
The compiler was complaining the value may be uninitialised
when it is used (which is wrong). Initialize to NULL to silent
the warning.
Axel Davy [Sun, 16 Aug 2015 10:57:40 +0000 (12:57 +0200)]
st/nine: Silent warning in update_vertex_buffer
There was an unused variable
Axel Davy [Sun, 9 Aug 2015 17:06:01 +0000 (19:06 +0200)]
st/nine: Catch setting the same shader
This is quite rare that an app does set again
the same shaders, but it isn't an expensive check
either.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 9 Aug 2015 17:02:02 +0000 (19:02 +0200)]
st/nine: Avoid Constant upload when there is no change
It is very common for d3d9 apps to set again the constants
they need before every draw call, even if nothing changed.
Since we are mostly gpu bound, it is better to check
for change, and upload constants again (and thus use
gpu bandwith) only if the constants changed.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sat, 25 Jul 2015 15:54:26 +0000 (17:54 +0200)]
st/nine: Fix the number of texture stages
The number of texture stages is 8.
'tex_stage' array was too big, and thus
the checks with 'Elements(state->ff.tex_stage)' were passing,
causing some invalid API calls to pass, and crash because of
out of bounds write since bumpmap_vars was just the correct size.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Thu, 14 May 2015 17:24:57 +0000 (19:24 +0200)]
st/nine: Use CSO cache for sampler views
The CSO cache unbinds views that are not needed anymore,
which we don't do.
It checks for change before committing the views.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Thu, 14 May 2015 17:10:41 +0000 (19:10 +0200)]
st/nine: Calculate dummy sampler state only once
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Thu, 14 May 2015 13:42:50 +0000 (15:42 +0200)]
st/nine: Better check shader constant limits
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Thu, 13 Aug 2015 17:24:02 +0000 (19:24 +0200)]
st/nine: Remove NINED3DRS_ZBIASSCALE
It wasn't giving the expected result.
This fixes some object being transparents
in games like FEAR.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sat, 16 May 2015 22:22:33 +0000 (00:22 +0200)]
st/nine: Implement special DOTPRODUCT3 behaviour
Taken from wine tests
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sat, 16 May 2015 10:14:54 +0000 (12:14 +0200)]
st/nine: Implement ff vertex data passthrough
Fixes Wine tests
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Fri, 15 May 2015 23:24:29 +0000 (01:24 +0200)]
st/nine: Change nine_state_update order
nine_update_state called every draw call.
This patch attemps to change the order
of the checks to have better control flow
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Wed, 13 May 2015 23:27:33 +0000 (01:27 +0200)]
st/nine: Programmable ps D3DTTSS_PROJECTED support
The implementation used Wine tests for conformance
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 12 May 2015 21:49:54 +0000 (23:49 +0200)]
st/nine: Complete ff texture transform implementation
Wine tests were used to get it right.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sat, 15 Aug 2015 20:52:19 +0000 (22:52 +0200)]
st/nine: Change a few advertised caps
There were flags all sm3 cards do advertise,
and we weren't.
Some games can trigger buggy rendering path
if the caps are not what they expect.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Fri, 8 May 2015 17:50:15 +0000 (19:50 +0200)]
st/nine: Advertise Fog flags
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 16 Aug 2015 12:59:52 +0000 (14:59 +0200)]
st/nine: Revert to userbuf path when needed
Automatically switch to userbuf path when
we would need to upload fog or bumpmat
constants
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 12 May 2015 19:56:04 +0000 (21:56 +0200)]
st/nine: Finish Fog implementation
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Mon, 11 May 2015 19:32:57 +0000 (21:32 +0200)]
st/nine: Rework shader states
Separate state setting and commit
Changes how the shader key is computed
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 10 May 2015 09:42:25 +0000 (11:42 +0200)]
st/nine: Remove some useless variables
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Axel Davy [Sun, 10 May 2015 10:01:10 +0000 (12:01 +0200)]
st/nine: Fix nine_ff_ps_key padding
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Fri, 8 May 2015 17:48:45 +0000 (19:48 +0200)]
st/nine: Begin programmable shader fog support
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Fri, 8 May 2015 17:26:20 +0000 (19:26 +0200)]
st/nine: Fix fixed function fog support
Previous code had only a subcase of fog working right.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 24 Mar 2015 10:06:22 +0000 (11:06 +0100)]
st/nine: Rework ff constant buffers
Always use a user constant buffer for ff.
It means we have to:
. commit the user constant buffer for ff when we use it
. commit back the non-ff constant buffer when we stop using it
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 24 Mar 2015 09:47:35 +0000 (10:47 +0100)]
st/nine: Rework constant buffer state handling
We have two paths:
. One that uses a fixed constant buffer, and updates it when needed
. One that uses a user constant buffer, and uploads it when needed.
This patch separates the preparation of the constant buffer
and the commit.
It also removes NineDevice9_RestoreNonCSOState, which was
used to restore all states. Instead the commit of the constant
buffer is moved to nine_state, and the other field settings
moved to other functions where more appropriate.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 24 Mar 2015 09:10:25 +0000 (10:10 +0100)]
st/nine: Rework blend states
Separate state preparation and state commit
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sat, 3 Jan 2015 10:36:09 +0000 (11:36 +0100)]
st/nine: Improve fallback when driver doesn't support user buffers.
For now the path updated is only used by Amd drivers, but a later
patch will make it used by all drivers. Some drivers like llvmpipe
doesn't support the uploading of constants from user buffers, so improve
the path to work for all drivers
Inspired from the gl state tracker.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 15 Feb 2015 15:22:43 +0000 (16:22 +0100)]
st/nine: Avoid useless updates in SetSamplerState
Check for redundant settings
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Axel Davy [Tue, 24 Mar 2015 09:16:59 +0000 (10:16 +0100)]
st/nine: Rework rasterizer states
Separate state preparation and state commit
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Fri, 15 May 2015 21:52:09 +0000 (23:52 +0200)]
st/nine: Reorder DSA state settings
Separate state preparation and state commit
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 24 Mar 2015 08:35:18 +0000 (09:35 +0100)]
st/nine: Reorder nine_state.
Instead of mixing state preparation (filling pipe_****)
and state commit (pipe->set_*****),
begin doing so in two separate functions.
This will allow to implement efficient Stateblocks,
and eventually lead to optimisation where the complete
pipe_*** structure is only partially updated.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 15 Feb 2015 08:19:16 +0000 (09:19 +0100)]
st/nine: Remove group_mask argument from nine_update_state
It was only used to discriminate update framebuffer vs update
everything. Instead use two functions.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Tiziano Bacocco [Fri, 30 Jan 2015 19:10:38 +0000 (20:10 +0100)]
st/nine: Implement TEXBEM,TEXBEML and BEM
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
Patrick Rudolph [Sun, 17 May 2015 10:46:42 +0000 (12:46 +0200)]
st/nine: Fix use of uninitialized values
Set all values to 0 after allocation. Found using valgrind.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Sat, 16 May 2015 17:47:00 +0000 (19:47 +0200)]
st/nine: Prevent possible crash
In case NineBaseTexture9_ctor returns an error
This->surfaces[l] might be NULL.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Tue, 19 May 2015 18:18:29 +0000 (20:18 +0200)]
st/nine: Return correct error codes in NineDevice9_Reset
Allow more than two errors, and return D3DERR_INVALIDCALL
for failed display resolution changes.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Wed, 13 May 2015 17:51:30 +0000 (19:51 +0200)]
st/nine: Fail on D3DUSAGE_DYNAMIC for D3DPOOL_SCRATCH textures
Texture with pool D3DPOOL_SCRATCH and D3DPOOL_MANAGED
cannot be used with flag D3DUSAGE_DYNAMIC.
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Axel Davy [Thu, 14 May 2015 15:22:26 +0000 (17:22 +0200)]
st/nine: Fix Lock Checks for Compressed textures
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Thu, 14 May 2015 15:01:40 +0000 (17:01 +0200)]
st/nine: Impose restrictions on DXTN texture sizes
This is the expected behaviour.
Fixes wine tests.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Patrick Rudolph [Wed, 13 May 2015 17:43:04 +0000 (19:43 +0200)]
st/nine: Return NULL pointer in lock error cases
Tests showed, that in case of errors, the pBits pointer is set to NULL.
The pBits field isn't set to NULL in case of an already locked object.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Wed, 13 May 2015 05:19:11 +0000 (07:19 +0200)]
st/nine: Fix resource SetPriority/GetPriority
Return 0 for non MANAGED textures and surfaces.
Fixes failing wine d3d9 tests device.c test_resource_priority.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Tue, 12 May 2015 18:28:17 +0000 (20:28 +0200)]
st/nine: Clean GetPrivateData
Move the assert to return error codes in the correct order.
Always set the pSizeOfData to the required buffer size.
Fixes failing wine test device.c test_private_data()
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Mon, 20 Apr 2015 17:26:55 +0000 (19:26 +0200)]
st/nine: Allow lock coordinates outside range
This fixes wine test device.c test_lockrect_invalid()
Mimic WindowsXp behaviour and allow negative values in the rectangle passed.
Add comment to point out behaviour used.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Tue, 12 May 2015 18:07:09 +0000 (20:07 +0200)]
st/nine: Fix GenerateMipSubLevels potential crash
For the case of D3DPOOL_MANAGED textures, This->base.resource can be NULL
at the start of the function. In This case, UploadSelf will take care
of the defining. Assign resource after the UploadSelf call
to prevent NULL pointer exception.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Axel Davy [Sat, 16 May 2015 16:40:02 +0000 (18:40 +0200)]
st/nine: Fix FillColor Flag check
IT is better check if the surface was created with RT flag,
instead of checking capability (llvmpipe was complaining)
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Thu, 7 May 2015 23:29:35 +0000 (01:29 +0200)]
st/nine: Fix StretchRect checks
Fixes Wine tests
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Fri, 8 May 2015 14:54:53 +0000 (16:54 +0200)]
st/nine: Implement EvictManagedResources
EvictManagedResources is used by apps to free
the gpu memory of MANAGED textures (which have
a cpu memory backing)
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Wed, 6 May 2015 22:03:21 +0000 (00:03 +0200)]
st/nine: Track managed textures
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 5 May 2015 18:40:12 +0000 (20:40 +0200)]
st/nine: Only update dirty rect for UpdateTexture
UpdateTexture is supposed to optimise by uploading only for the
dirty region of the source (d3d9 doc, wine tests).
This patch adds the behaviour for surfaces, but not entirely for
volumes.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 3 May 2015 22:17:09 +0000 (00:17 +0200)]
st/nine: Textures start dirty
According to the spec all textures start
dirty.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 3 May 2015 21:53:48 +0000 (23:53 +0200)]
st/nine: Track dirty region for SYSTEMMEM too
Dirty regions should be tracked for both MANAGED
and SYSTEMMEM.
Until now we didn't bother to track for SYSTEMMEM,
because we hadn't implemented using the dirty region
to avoid some copies
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 3 May 2015 21:46:14 +0000 (23:46 +0200)]
st/nine: Add missing BASETEX_REGISTER_UPDATE calls
If the texture is bound and dirty_mip is true,
BASETEX_REGISTER_UPDATE adds the texture to the list
of things to update before the next draw call.
Some calls to it were missing.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 3 May 2015 21:28:25 +0000 (23:28 +0200)]
st/nine: SetAutoGenFilterType should regenerate the sublevels
It should regenerate the sublevels according to the spec
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 3 May 2015 20:57:13 +0000 (22:57 +0200)]
st/nine: Simplify NineVolume9_CopyVolume
We had only one usage for this function.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sun, 3 May 2015 20:40:38 +0000 (22:40 +0200)]
st/nine: Split NineSurface9_CopySurface
NineSurface9_CopySurface was supporting more cases than what
we needed, and doing checks that were innapropriate for
some NineSurface9_CopySurface use cases.
This patch splits it into two for the two use cases, and moves
the checks to the caller.
This patch also adds a few checks to NineDevice9_UpdateSurface
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Tue, 5 May 2015 21:51:24 +0000 (23:51 +0200)]
st/nine: Simplify Volume9 dirty region tracking
Similar to what was done for Surface9, track the dirty region
only in VolumeTexture9.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Marek Olšák [Sat, 8 Nov 2014 12:02:47 +0000 (13:02 +0100)]
util/u_blitter: implement alpha blending for pipe->blit
Christoph Bumiller [Sat, 31 May 2014 21:13:24 +0000 (23:13 +0200)]
gallium: Add blending to pipe blit
This type of blending is used for gallium nine software cursor
Signed-off-by: David Heidelberg <david@ixit.cz>
Axel Davy [Sat, 21 Mar 2015 21:28:59 +0000 (22:28 +0100)]
st/nine: Revert to sw cursor in case of failure to set hw cursor
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Axel Davy [Sat, 21 Mar 2015 21:23:56 +0000 (22:23 +0100)]
st/nine: Do not call ID3DPresent_GetCursorPos for sw cursor
For sw cursor we do not tell wine the cursor position (the app
tells us directly). We shouldn't use ID3DPresent_GetCursorPos.
device->cursor.pos already contains the coordinates the app
gave us.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Axel Davy [Sun, 22 Mar 2015 17:48:07 +0000 (18:48 +0100)]
st/nine: Force hw cursor for Windowed mode
According to the spec, Windowed mode must
have hw cursor
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Axel Davy [Sat, 21 Mar 2015 21:21:14 +0000 (22:21 +0100)]
st/nine: Hide hardware cursor when we don't use it
We have either hardware cursor or software cursor.
When we use software cursor, we should hide the hardware
cursor.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Axel Davy [Sun, 15 Feb 2015 20:30:44 +0000 (21:30 +0100)]
st/nine: fix D3DRS_DITHERENABLE wrong state group
D3DRS_DITHERENABLE was assigned to the rasterizer state
group, but it was used for the blend group.
Assign it to the blend group.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Patrick Rudolph [Sun, 19 Apr 2015 08:14:30 +0000 (10:14 +0200)]
st/nine: Account POINTSIZE_MIN and POINTSIZE_MAX for point size
When using D3DRS_POINTSIZE make sure the value is at least
D3DRS_POINTSIZE_MIN but not greater than D3DRS_POINTSIZE_MAX.
Fixes some Wine tests.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Patrick Rudolph [Tue, 12 May 2015 05:27:37 +0000 (07:27 +0200)]
st/nine: Align texture memory
Align texture memory on 32 byte boundry to allow
SSE/AVX memcpy to work on locked rects.
This fixes some crashes with games using SSE.
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Axel Davy [Sat, 16 May 2015 16:41:51 +0000 (18:41 +0200)]
st/nine: Always set point_quad_rasterization to 1
Both Points and Point Sprites are rasterized like quads,
according to d3d9 doc and gallium rasterizer doc.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Axel Davy [Sat, 16 May 2015 20:41:26 +0000 (22:41 +0200)]
st/nine: Fix Swizzle for ATI2 format
We had red and green in the wrong channels
for the ATI2 format (RGTC2).
Found thanks to wine tests.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: David Heidelberg <david@ixit.cz>
Patrick Rudolph [Mon, 25 May 2015 08:36:21 +0000 (10:36 +0200)]
target/d3dadapter9: Return Windows like card names
Add support for multiple cards and fill in Win
like card name, driver name and version info.
Use fallback for unknown vendors and unknown card names.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
David Heidelberg [Fri, 10 Apr 2015 22:13:53 +0000 (00:13 +0200)]
st/nine: Require gcc >= 4.6
Nine code uses some C11 features, and this
leads to compile error on gcc <= 4.5
Another way would have been to use the
-fms-extensions CFLAG
Signed-off-by: David Heidelberg <david@ixit.cz>
Cc: "10.4 10.5 10.6" <mesa-stable@lists.freedesktop.org>
Ilia Mirkin [Fri, 21 Aug 2015 19:08:15 +0000 (15:08 -0400)]
glsl: fix error message when validating tcs output decls
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Rob Clark [Mon, 10 Aug 2015 21:27:19 +0000 (17:27 -0400)]
relnote updates
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Ilia Mirkin [Fri, 21 Aug 2015 00:06:50 +0000 (20:06 -0400)]
st/mesa: pass through 4th opcode argument in bitmap/pixel visitors
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Ilia Mirkin [Thu, 20 Aug 2015 23:59:04 +0000 (19:59 -0400)]
st/mesa: fix assignments with 4-operand arguments (i.e. BFI)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Martin Peres [Fri, 21 Aug 2015 13:25:14 +0000 (16:25 +0300)]
i965: allow image_size on float images
This got missed because the piglit test only tested int images to avoid a
combinatiorial explosion of format, targets, stages and sizes which
takes more than 5 minutes to test on nvidia's driver.
This patch also drops the IMAGE_FUNCTION_AVAIL_ATOMIC which is not applicable
to the image_size codepath but was not hurting in any way.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Zoltan Gilian [Wed, 19 Aug 2015 09:56:08 +0000 (11:56 +0200)]
clover: fix llvm 3.5 build error
There is no MDOperand in llvm 3.5.
v2: Check if kernel metadata is present to avoid crash (EdB).
v3: Second attempt to avoid crash: switch off metadata query for llvm < 3.6.
Reviewed-by: Serge Martin (EdB) <edb+mesa@sigluy.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Tapani Pälli [Thu, 20 Aug 2015 07:25:59 +0000 (10:25 +0300)]
mesa: update fbo state in glTexStorage
We have to re-validate FBOs rendering to the texture like is done
with TexImage and CopyTexImage.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91673
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Eric Anholt [Wed, 19 Aug 2015 05:19:12 +0000 (22:19 -0700)]
vc4: Add algebraic opt for rcp(1.0).
We're generating rcps as part of backend lowering of the packed coordinate
in the CS, and we don't want to lower them in NIR because of the extra
newton-raphson steps in the common case. However, GLB2.7 is moving a
vertex attribute with a 1.0 W component to the position, and that makes us
produce some silly RCPs.
total instructions in shared programs: 97590 -> 97580 (-0.01%)
instructions in affected programs: 74 -> 64 (-13.51%)
Eric Anholt [Wed, 19 Aug 2015 05:07:47 +0000 (22:07 -0700)]
vc4: Allow unpack_8[abcd]_f's src to stay in r4.
I had QPU emit code to do it, but forgot to flag the register class.
total instructions in shared programs: 97974 -> 97590 (-0.39%)
instructions in affected programs: 25291 -> 24907 (-1.52%)
Eric Anholt [Wed, 19 Aug 2015 04:26:05 +0000 (21:26 -0700)]
vc4: Pack the unorm-packing bits into a src MUL instruction when possible.
Now that we do non-SSA QIR instructions, we can take a NIR SSA src that's
only used by the unorm packing and just stuff the pack bits into it.
total instructions in shared programs: 98136 -> 97974 (-0.17%)
instructions in affected programs: 4149 -> 3987 (-3.90%)
Eric Anholt [Wed, 19 Aug 2015 04:43:42 +0000 (21:43 -0700)]
vc4: Add a QIR helper for whether the op is a MUL type.
Eric Anholt [Wed, 19 Aug 2015 03:18:51 +0000 (20:18 -0700)]
vc4: Drop an unused algebraic op.
NIR now handles this optimization for us.
Eric Anholt [Thu, 6 Aug 2015 03:54:02 +0000 (20:54 -0700)]
vc4: Switch QPU_PACK_SCALED to be two non-SSA instructions.
total instructions in shared programs: 98159 -> 98136 (-0.02%)
instructions in affected programs: 12279 -> 12256 (-0.19%)
Eric Anholt [Thu, 6 Aug 2015 03:31:21 +0000 (20:31 -0700)]
vc4: Make the pack-to-unorm instructions be non-SSA.
This helps ensure that the register allocator doesn't force the later pack
operations to insert extra MOVs.
total instructions in shared programs: 98170 -> 98159 (-0.01%)
instructions in affected programs: 2134 -> 2123 (-0.52%)
Eric Anholt [Tue, 4 Aug 2015 02:25:47 +0000 (19:25 -0700)]
vc4: Allow QIR registers to be non-SSA.
Now that we have NIR, most of the optimization we still need to do is
peepholes on instruction selection rather than general dataflow
operations. This means we want to be able to have QIR be a lot closer to
the actual QPU instructions, just with virtual registers. Allowing
multiple instructions writing the same register opens up a lot of
possibilities.
Eric Anholt [Thu, 6 Aug 2015 03:11:07 +0000 (20:11 -0700)]
vc4: We can now move TEX_RESULT accesses across other r4 ops.
No difference on shader-db.
Timothy Arceri [Wed, 27 May 2015 10:12:42 +0000 (20:12 +1000)]
glsl: fix binding validation for interface blocks
V2: rebase on SSBO changes
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Timothy Arceri [Sun, 16 Aug 2015 04:26:23 +0000 (14:26 +1000)]
glsl: interleave constant propagation and folding
The constant folding pass can take a long time to complete
so rather than running through the entire pass each time
a new constant is propagated (and vice versa) interleave them.
This change helps ES31-CTS.arrays_of_arrays.InteractionFunctionCalls1
go from around 2 min -> 23 sec.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Ilia Mirkin [Fri, 21 Aug 2015 02:13:48 +0000 (22:13 -0400)]
nv50/ir: pre-compute BFE arg when both bits and offset are imm
Due to a quirk in how the nv50 opt passes run, the algebraic
optimization that looks for these BFE's happens before the constant
folding pass. Rearranging these passes isn't a great idea, but this is
easy enough to fix. Allows a following cvt to eliminate the bfe in
certain situations.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>