OSDN Git Service
Marco Felsch [Fri, 30 Sep 2022 12:48:12 +0000 (14:48 +0200)]
media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
supports two operating modes:
1st) parallel-in -> mipi-csi out
2nd) mipi-csi in -> parallel out
This patch only adds the support for the 1st mode.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Marco Felsch [Fri, 30 Sep 2022 12:48:11 +0000 (14:48 +0200)]
media: dt-bindings: add bindings for Toshiba TC358746
Add the bindings for the Toshiba TC358746 Parallel <-> MIPI-CSI bridge
driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Marco Felsch [Fri, 30 Sep 2022 12:48:10 +0000 (14:48 +0200)]
phy: dphy: add support to calculate the timing based on hs_clk_rate
For MIPI-CSI sender use-case it is common to specify the allowed
link-frequencies which should be used for the MIPI link and is
half the hs-clock rate.
This commit adds a helper to calculate the D-PHY timing based on the
hs-clock rate so we don't need to calculate the timings within the
driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Marco Felsch [Fri, 30 Sep 2022 12:48:09 +0000 (14:48 +0200)]
phy: dphy: refactor get_default_config
Factor out the calculation into phy_mipi_dphy_calc_config(). This is
needed for the follow up patch which adds the support to calculate the
timings based on a given hs clock. No functional changes are done.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Sakari Ailus [Mon, 17 Oct 2022 07:04:32 +0000 (10:04 +0300)]
v4l: subdev: Warn if disabling streaming failed, return success
Complain in the newly added s_stream video op wrapper if disabling
streaming failed. Also return zero in this case as there's nothing the
caller can do to return the error.
This way drivers also won't need to bother with printing error messages.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Sakari Ailus [Mon, 17 Oct 2022 07:23:28 +0000 (10:23 +0300)]
dw9768: Enable low-power probe on ACPI
Add support for low-power probe to the driver. Also fix runtime PM API
usage in the driver.
Much of the hassle comes from different factors affecting device power
states during probe for ACPI and DT.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes:
859891228e56 ("media: i2c: dw9768: Add DW9768 VCM driver")
Laurent Pinchart [Sun, 16 Oct 2022 06:15:23 +0000 (09:15 +0300)]
media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
The IMX290 gain register controls the analogue gain. Replace the
V4L2_CID_GAIN control with V4L2_CID_ANALOGUE_GAIN.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:22 +0000 (09:15 +0300)]
media: i2c: imx290: Add crop selection targets support
Implement read-only access to crop selection rectangles to expose the
analogue crop rectangle. The public (leaked) IMX290 documentation is not
very clear on how cropping is implemented and configured exactly, so
the margins may not be entirely accurate.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:21 +0000 (09:15 +0300)]
media: i2c: imx290: Factor out format retrieval to separate function
The driver duplicates the same pattern to access the try or active
format in multiple locations. Factor it out to a separate function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:20 +0000 (09:15 +0300)]
media: i2c: imx290: Move registers with fixed value to init array
Registers 0x3012, 0x3013 and 0x3480 are not documented and are set in
the per-mode register arrays with values indentical for all modes. Move
them to the common array.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:19 +0000 (09:15 +0300)]
media: i2c: imx290: Create controls for fwnode properties
Create the V4L2_CID_ORIENTATION and V4L2_CID_ROTATION controls to
expose the corresponding fwnode properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:18 +0000 (09:15 +0300)]
media: i2c: imx290: Implement HBLANK and VBLANK controls
Add support for the V4L2_CID_HBLANK and V4L2_CID_VBLANK controls to the
imx290 driver. Make the controls read-only to start with, to report the
values to userspace for timing calculation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:17 +0000 (09:15 +0300)]
media: i2c: imx290: Split control initialization to separate function
The imx290_probe() function is too large. Split control initialzation to
a dedicated function to increase code readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:16 +0000 (09:15 +0300)]
media: i2c: imx290: Fix max gain value
The gain is expressed in multiple of 0.3dB, as a value between 0.0dB
and 72.0dB. Gains between 0.0dB and 30.0dB (included) apply analog gain
only, higher gains from 30.3dB to 72dB apply additional digital gain.
The maximum gain value is erroneously set to 72. Increase it to 100 to
cover the whole analog gain range. Support for digital gain can be added
separately if needed.
The IMX327 and IMX462 are largely compatible with the IMX290, but have
an analog gain range of 0.0dB to 29.4dB and 42dB of digital gain. When
support for those sensors gets added to the driver, the gain control
should be adjusted accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:15 +0000 (09:15 +0300)]
media: i2c: imx290: Add exposure time control
Support configuring the exposure time, which is expressed as the
complement of the exposure time (frame period minus integration time).
The frame period is currently fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Mon, 17 Oct 2022 08:35:45 +0000 (11:35 +0300)]
media: i2c: imx290: Define more register macros
Define macros for all registers programmed by the driver for which
documentation is available to increase readability. This starts making
use of 16-bit registers in the register arrays, so the value field has
to be increased to 32 bits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:13 +0000 (09:15 +0300)]
media: i2c: imx290: Simplify error handling when writing registers
Error handling for register writes requires checking the error status of
every single write. This makes the code complex, or incorrect when the
checks are omitted. Simplify this by passing a pointer to an error code
to the imx290_write_reg() function, which allows writing multiple
registers in a row and only checking for errors at the end.
While at it, rename imx290_write_reg() to imx290_write() as there's
nothing else than registers to write, and rename imx290_read_reg()
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:12 +0000 (09:15 +0300)]
media: i2c: imx290: Correct register sizes
Define registers with the appropriate size, using the variable-size
register access mechanism that has just been introduced. This simplifies
the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:11 +0000 (09:15 +0300)]
media: i2c: imx290: Support variable-sized registers
The IMX290 has registers of different sizes. To simplify the code,
handle this in the read/write functions instead of in the callers by
encoding the register size in the symbolic name macros. All registers
are defined as 8-bit for now, a subsequent change will move to larger
registers where applicable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:10 +0000 (09:15 +0300)]
media: i2c: imx290: Specify HMAX values in decimal
The HMAX value specifies the total line length in pixels. It's thus more
readable in decimal than hexadecimal. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:09 +0000 (09:15 +0300)]
media: i2c: imx290: Drop regmap cache
Only two registers are ever read, and once only. There's no need to
cache values.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:08 +0000 (09:15 +0300)]
media: i2c: imx290: Drop imx290_write_buffered_reg()
The imx290_write_buffered_reg() function wraps a register write with
register hold, to enable changing multiple registers synchronously. It
is used for the gain only, which is an 8-bit register, defeating its
purpose.
The feature is useful, but should be implemented differently. Drop the
function for now, to prepare for a rework of register access.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:07 +0000 (09:15 +0300)]
media: i2c: imx290: Replace macro with explicit ARRAY_SIZE()
Use ARRAY_SIZE(imx290->supplies) for code that needs the size of the
array, instead of relying on the IMX290_NUM_SUPPLIES. The result is less
error-prone as it ties the size to the array.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:06 +0000 (09:15 +0300)]
media: i2c: imx290: Print error code when I2C transfer fails
Knowing why I2C transfers fail is useful for debugging. Extend the error
message to print the error code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:05 +0000 (09:15 +0300)]
media: i2c: imx290: Use device lock for the control handler
The link frequency and pixel rate controls are set without holding the
control handler lock, resulting in kernel warnings. As the value of
those controls depend on the format, the simplest fix is to use the
device lock for the control handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Laurent Pinchart [Sun, 16 Oct 2022 06:15:04 +0000 (09:15 +0300)]
media: dt-bindings: Convert imx290.txt to YAML
Convert the Sony IMX290 DT binding from text to YAML. Add Manivannan as
a maintainer given that he is listed in MAINTAINERS for the file, as
volunteering myself.
The name of the input clock, "xclk", is wrong as the hardware manual
names it INCK. As the device has a single clock, the name could be
omitted, but that would require a corresponding change to the driver and
is thus a candidate for further patches.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Benjamin Mugnier [Tue, 11 Oct 2022 12:30:30 +0000 (14:30 +0200)]
media: i2c: Add driver for ST VGXY61 camera sensor
The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per
lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats.
The driver handles both sensor types:
- VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps.
- VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps.
The driver supports:
- HDR linearize mode, HDR substraction mode, and no HDR
- GPIOs LEDs strobing
- Digital binning and analog subsampling
- Horizontal and vertical flip
- Manual exposure
- Analog and digital gains
- Test patterns
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Benjamin Mugnier [Tue, 11 Oct 2022 12:30:29 +0000 (14:30 +0200)]
media: Documentation: Add ST VGXY61 driver documentation
Document V4L2_CID_HDR_MODE possible values for this sensor.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Benjamin Mugnier [Tue, 11 Oct 2022 12:30:28 +0000 (14:30 +0200)]
media: dt-bindings: Add ST VGXY61 camera sensor binding
Add device tree binding for the ST VGXY61 camera sensor, and update
MAINTAINERS file.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Benjamin Mugnier [Tue, 11 Oct 2022 12:16:02 +0000 (14:16 +0200)]
media: v4l: ctrls: Add a control for HDR mode
Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the
sensor, and its documentation.
Menu items are not standardized as they differ for each sensors.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Benjamin Mugnier [Tue, 11 Oct 2022 12:16:01 +0000 (14:16 +0200)]
media: v4l: Add 1X16 16-bit greyscale media bus code definition
This extends the greyscale media bus family originally from
MEDIA_BUS_FMT_Y8_1X8 up to MEDIA_BUS_FMT_Y14_1X14 by adding
MEDIA_BUS_FMT_Y16_1X16, and behaves the same way with 16 bits.
Add its documentation in subdev-formats.rst
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Mikhail Rudenko [Sat, 22 Oct 2022 16:20:07 +0000 (19:20 +0300)]
media: i2c: add support for OV4689
Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This
is a 4 Mpx image sensor using the I2C bus for control and the CSI-2
bus for data.
This driver supports following features:
- manual exposure and analog gain control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 2688x1520 at 30 fps
The driver provides all mandatory V4L2 controls for compatibility with
libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver
implements 4 lane mode only at this moment.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Mikhail Rudenko [Sat, 22 Oct 2022 16:20:06 +0000 (19:20 +0300)]
media: dt-bindings: i2c: document OV4689
Add device-tree binding documentation for OV4689 image sensor driver,
and the relevant MAINTAINERS entries.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Shawn Tu [Tue, 25 Oct 2022 02:27:38 +0000 (10:27 +0800)]
media: i2c: Add ov08x40 image sensor driver
Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 3856x2464 at 30FPS
+ 1928x1208 at 30FPS
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Marek Szyprowski [Fri, 23 Sep 2022 09:42:01 +0000 (11:42 +0200)]
media: exynos4-is: don't rely on the v4l2_async_subdev internals
Commit
1f391df44607 ("media: v4l2-async: Use endpoints in
__v4l2_async_nf_add_fwnode_remote()") changed the data that is stored in
the v4l2_async_subdev internals from the fwnode pointer to the parent
device to the fwnode pointer to the matched endpoint. This broke the
sensor matching code, which relied on the particular fwnode data in the
v4l2_async_subdev internals. Fix this by simply matching the
v4l2_async_subdev pointer, which is already available there.
Reported-by: Daniel Scally <djrscally@gmail.com>
Fixes:
fa91f1056f17 ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rafael Mendonca [Tue, 20 Sep 2022 14:27:48 +0000 (11:27 -0300)]
media: i2c: ov5648: Free V4L2 fwnode data on unbind
The V4L2 fwnode data structure doesn't get freed on unbind, which leads to
a memleak.
Fixes:
e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Hidenori Kobayashi [Wed, 21 Sep 2022 09:24:17 +0000 (18:24 +0900)]
media: ov8856: Add runtime PM callbacks
There were no runtime PM callbacks registered, leaving regulators being
enabled while the device is suspended on DT systems. Adjust and register
existing power controlling functions to turn them off/on.
Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Ricardo Ribalda [Wed, 21 Sep 2022 11:38:00 +0000 (13:38 +0200)]
media: i2c: ad5820: Fix error path
Error path seems to be swaped. Fix the order and provide some meaningful
names.
Fixes:
bee3d5115611 ("[media] ad5820: Add driver for auto-focus coil")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Lad Prabhakar [Mon, 19 Sep 2022 14:33:50 +0000 (15:33 +0100)]
media: i2c: ov5645: Drop fetching the clk reference by name
The OV5645 sensor has a single clock source, so just drop fetching the
clk reference by name.
This is in preparation to drop the "clock-names" property from the DT
binding.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rafael Mendonca [Mon, 19 Sep 2022 02:12:51 +0000 (23:12 -0300)]
media: i2c: hi846: Fix memory leak in hi846_parse_dt()
If any of the checks related to the supported link frequencies fail, then
the V4L2 fwnode resources don't get released before returning, which leads
to a memleak. Fix this by properly freeing the V4L2 fwnode data in a
designated label.
Fixes:
e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Sakari Ailus [Mon, 19 Sep 2022 10:07:30 +0000 (13:07 +0300)]
media: v4l: subdev: Document s_power() callback is deprecated
Runtime PM has been around for a decade or more, there's hardly a need to
use the V4L2 specific s_power() callback in drivers anymore. Document this
in s_power() callback documentation as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Laurent Pinchart [Thu, 8 Sep 2022 21:40:09 +0000 (00:40 +0300)]
media: Fix documentation typos in media-entity.h
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Maximilian Luz [Wed, 7 Sep 2022 22:44:09 +0000 (00:44 +0200)]
ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection()
Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.
The same issue has been addressed for imgu_subdev_get_selection() with
commit
30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().
Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection().
Fixes:
0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Linus Torvalds [Sun, 23 Oct 2022 22:27:33 +0000 (15:27 -0700)]
Linux 6.1-rc2
Linus Torvalds [Sun, 23 Oct 2022 22:00:43 +0000 (15:00 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
Jason A. Donenfeld [Sat, 8 Oct 2022 15:47:00 +0000 (09:47 -0600)]
Revert "mfd: syscon: Remove repetition of the regmap_get_val_endian()"
This reverts commit
72a95859728a7866522e6633818bebc1c2519b17.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes:
72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 23 Oct 2022 19:01:01 +0000 (12:01 -0700)]
kernel/utsname_sysctl.c: Fix hostname polling
Commit
bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.
Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c. But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes:
bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 23 Oct 2022 17:14:45 +0000 (10:14 -0700)]
Merge tag 'perf_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
Linus Torvalds [Sun, 23 Oct 2022 17:10:55 +0000 (10:10 -0700)]
Merge tag 'sched_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Adjust code to not trip up CFI
- Fix sched group cookie matching
* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Introduce struct balance_callback to avoid CFI mismatches
sched/core: Fix comparison in sched_group_cookie_match()
Linus Torvalds [Sun, 23 Oct 2022 17:07:01 +0000 (10:07 -0700)]
Merge tag 'objtool_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Fix ORC stack unwinding when GCOV is enabled
* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unreliable stack dump with gcov
Linus Torvalds [Sun, 23 Oct 2022 17:01:34 +0000 (10:01 -0700)]
Merge tag 'x86_urgent_for_v6.0_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
Linus Torvalds [Sun, 23 Oct 2022 16:55:50 +0000 (09:55 -0700)]
Merge tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
Linus Torvalds [Sat, 22 Oct 2022 23:04:34 +0000 (16:04 -0700)]
Merge tag 'hwmon-for-v6.1-rc2' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
Linus Torvalds [Sat, 22 Oct 2022 22:59:46 +0000 (15:59 -0700)]
Merge tag 'i2c-for-6.1-rc2' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"RPM fix for qcom-cci, platform module alias for xiic, build warning
fix for mlxbf, typo fixes in comments"
* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxbf: depend on ACPI; clean away ifdeffage
i2c: fix spelling typos in comments
i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
i2c: xiic: Add platform module alias
Linus Torvalds [Sat, 22 Oct 2022 22:52:36 +0000 (15:52 -0700)]
Merge tag 'pci-v6.1-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a simplification that broke pci-tegra due to a masking error
- Update MAINTAINERS for Kishon's email address change and TI
DRA7XX/J721E maintainer change
* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
Linus Torvalds [Sat, 22 Oct 2022 22:30:15 +0000 (15:30 -0700)]
Merge tag 'media/v6.1-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
Pavel Begunkov [Fri, 21 Oct 2022 10:16:41 +0000 (11:16 +0100)]
io_uring/net: fail zc sendmsg when unsupported by socket
The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 21 Oct 2022 10:16:40 +0000 (11:16 +0100)]
io_uring/net: fail zc send when unsupported by socket
If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 21 Oct 2022 10:16:39 +0000 (11:16 +0100)]
net: flag sockets supporting msghdr originated zerocopy
We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wilken Gottwalt [Sat, 8 Oct 2022 11:35:34 +0000 (11:35 +0000)]
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
Also update the documentation accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Paolo Bonzini [Sat, 22 Oct 2022 11:43:52 +0000 (07:43 -0400)]
tools: include: sync include/api/linux/kvm.h
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Fixes:
17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf [Mon, 17 Oct 2022 18:45:41 +0000 (20:45 +0200)]
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.
This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes:
1a155254ff937 ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <
20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf [Mon, 17 Oct 2022 18:45:40 +0000 (20:45 +0200)]
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <
20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf [Mon, 17 Oct 2022 18:45:39 +0000 (20:45 +0200)]
kvm: Add support for arch compat vm ioctls
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <
20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 22 Oct 2022 07:33:58 +0000 (03:33 -0400)]
Merge tag 'kvm-riscv-fixes-6.1-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.1, take #1
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
Paolo Bonzini [Sat, 22 Oct 2022 07:33:26 +0000 (03:33 -0400)]
Merge tag 'kvmarm-fixes-6.1-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.1, take #2
- Fix a bug preventing restoring an ITS containing mappings
for very large and very sparse device topology
- Work around a relocation handling error when compiling
the nVHE object with profile optimisation
Paolo Bonzini [Sat, 22 Oct 2022 07:32:23 +0000 (03:32 -0400)]
Merge tag 'kvmarm-fixes-6.1-1' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.1, take #1
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
Linus Torvalds [Sat, 22 Oct 2022 01:26:00 +0000 (18:26 -0700)]
Merge tag 'thermal-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"This fixes the control CPU selection in the intel_powerclamp thermal
driver"
* tag 'thermal-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel_powerclamp: Use first online CPU as control_cpu
Linus Torvalds [Sat, 22 Oct 2022 01:19:42 +0000 (18:19 -0700)]
Merge tag 'pm-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some issues and clean up code in ARM cpufreq drivers.
Specifics:
- Fix module loading in the Tegra124 cpufreq driver (Jon Hunter)
- Fix memory leak and update to read-only region in the qcom cpufreq
driver (Fabien Parent)
- Miscellaneous minor cleanups to cpufreq drivers (Fabien Parent,
Yang Yingliang)"
* tag 'pm-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: sun50i: Switch to use dev_err_probe() helper
cpufreq: qcom-nvmem: Switch to use dev_err_probe() helper
cpufreq: imx6q: Switch to use dev_err_probe() helper
cpufreq: dt: Switch to use dev_err_probe() helper
cpufreq: qcom: remove unused parameter in function definition
cpufreq: qcom: fix writes in read-only memory region
cpufreq: qcom: fix memory leak in error path
cpufreq: tegra194: Fix module loading
Linus Torvalds [Sat, 22 Oct 2022 01:08:30 +0000 (18:08 -0700)]
Merge tag 'acpi-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced during this merge window (ACPI/PCI, device
enumeration and documentation) and some other ones found recently.
Specifics:
- Add missing device reference counting to acpi_get_pci_dev() after
changing it recently (Rafael Wysocki)
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy)
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby)
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)
- Fix multiple error records handling in one of the ACPI extlog
driver code paths (Tony Luck)
- Prune DSDT override documentation from index after dropping it
(Bagas Sanjaya)"
* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Fix DMA range assignment
ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
ACPI: extlog: Handle multiple records
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
Documentation: ACPI: Prune DSDT override documentation from index
Linus Torvalds [Sat, 22 Oct 2022 01:02:36 +0000 (18:02 -0700)]
Merge tag 'efi-fixes-for-v6.1-1' of git://git./linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- fixes for the EFI variable store refactor that landed in v6.0
- fixes for issues that were introduced during the merge window
- back out some changes related to EFI zboot signing - we'll add a
better solution for this during the next cycle
* tag 'efi-fixes-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: runtime: Don't assume virtual mappings are missing if VA == PA == 0
efi: libstub: Fix incorrect payload size in zboot header
efi: libstub: Give efi_main() asmlinkage qualification
efi: efivars: Fix variable writes without query_variable_store()
efi: ssdt: Don't free memory if ACPI table was loaded successfully
efi: libstub: Remove zboot signing from build options
Linus Torvalds [Sat, 22 Oct 2022 00:47:39 +0000 (17:47 -0700)]
Merge tag 'iommu-fixes-v6.1-rc1' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Intel VT-d fixes:
- Fix a lockdep splat issue in intel_iommu_init()
- Allow NVS regions to pass RMRR check
- Domain cleanup in error path"
* tag 'iommu-fixes-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Clean up si_domain in the init_dmars() error path
iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
iommu/vt-d: Use rcu_lock in get_resv_regions
iommu: Add gfp parameter to iommu_alloc_resv_region
Linus Torvalds [Sat, 22 Oct 2022 00:41:57 +0000 (17:41 -0700)]
Merge tag 'for-linus-
2022102101' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- a 12 year old bug fix for the Apple Magic Trackpad v1 (José Expósito)
- a fix for a potential crash on removal of the Playstation controllers
(Roderick Colenbrander)
- a few new device IDs and device-specific quirks, most notably support
of the new Playstation DualSense Edge controller
* tag 'for-linus-
2022102101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Make array tp10ubkbd_led static const
HID: saitek: add madcatz variant of MMO7 mouse device ID
HID: playstation: support updated DualSense rumble mode.
HID: playstation: add initial DualSense Edge controller support
HID: playstation: stop DualSense output work on remove.
HID: magicmouse: Do not set BTN_MOUSE on double report
Linus Torvalds [Fri, 21 Oct 2022 23:01:53 +0000 (16:01 -0700)]
Merge tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- memory leak fixes
- fixes for directory leases, including an important one which fixes a
problem noticed by git functional tests
- fixes relating to missing free_xid calls (helpful for
tracing/debugging of entry/exit into cifs.ko)
- a multichannel fix
- a small cleanup fix (use of list_move instead of list_del/list_add)
* tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: fix memory leaks in session setup
cifs: drop the lease for cached directories on rmdir or rename
smb3: interface count displayed incorrectly
cifs: Fix memory leak when build ntlmssp negotiate blob failed
cifs: set rc to -ENOENT if we can not get a dentry for the cached dir
cifs: use LIST_HEAD() and list_move() to simplify code
cifs: Fix xid leak in cifs_get_file_info_unix()
cifs: Fix xid leak in cifs_ses_add_channel()
cifs: Fix xid leak in cifs_flock()
cifs: Fix xid leak in cifs_copy_file_range()
cifs: Fix xid leak in cifs_create()
Linus Torvalds [Fri, 21 Oct 2022 22:51:30 +0000 (15:51 -0700)]
Merge tag 'nfsd-6.1-2' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Fixes for patches merged in v6.1"
* tag 'nfsd-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: ensure we always call fh_verify_error tracepoint
NFSD: unregister shrinker when nfsd_init_net() fails
Chang S. Bae [Fri, 21 Oct 2022 18:58:44 +0000 (11:58 -0700)]
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
When an extended state component is not present in fpstate, but in init
state, the function copies from init_fpstate via copy_feature().
But, dynamic states are not present in init_fpstate because of all-zeros
init states. Then retrieving them from init_fpstate will explode like this:
BUG: kernel NULL pointer dereference, address:
0000000000000000
...
RIP: 0010:memcpy_erms+0x6/0x10
? __copy_xstate_to_uabi_buf+0x381/0x870
fpu_copy_guest_fpstate_to_uabi+0x28/0x80
kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm]
? __this_cpu_preempt_check+0x13/0x20
? vmx_vcpu_put+0x2e/0x260 [kvm_intel]
kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
? kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
? __fget_light+0xd4/0x130
__x64_sys_ioctl+0xe3/0x910
? debug_smp_processor_id+0x17/0x20
? fpregs_assert_state_consistent+0x27/0x50
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Adjust the 'mask' to zero out the userspace buffer for the features that
are not available both from fpstate and from init_fpstate.
The dynamic features depend on the compacted XSAVE format. Ensure it is
enabled before reading XCOMP_BV in init_fpstate.
Fixes:
2308ee57d93d ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: Yuan Yao <yuan.yao@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/lkml/BYAPR11MB3717EDEF2351C958F2C86EED95259@BYAPR11MB3717.namprd11.prod.outlook.com/
Link: https://lkml.kernel.org/r/20221021185844.13472-1-chang.seok.bae@intel.com
Linus Torvalds [Fri, 21 Oct 2022 22:19:43 +0000 (15:19 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small changes, one in the lpfc driver and the other in the core.
The core change is an additional footgun guard which prevents users
from writing the wrong state to sysfs and causing a hang"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Fix memory leak in lpfc_create_port()
scsi: core: Restrict legal sdev_state transitions via sysfs
Linus Torvalds [Fri, 21 Oct 2022 22:14:14 +0000 (15:14 -0700)]
Merge tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin)
- add a nvme-hwmong maintainer (Christoph Hellwig)
- fix error pointer dereference in error handling (Dan Carpenter)
- fix invalid memory reference in nvmet_subsys_attr_qid_max_show
(Daniel Wagner)
- don't limit the DMA segment size in nvme-apple (Russell King)
- fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg)
- disable write zeroes on various Kingston SSDs (Xander Li)
- fix a memory leak with block device tracing (Ye)
- flexible-array fix for ublk (Yushan)
- document the ublk recovery feature from this merge window
(ZiyangZhang)
- remove dead bfq variable in struct (Yuwei)
- error handling rq clearing fix (Yu)
- add an IRQ safety check for the cached bio freeing (Pavel)
- drbd bio cloning fix (Christoph)
* tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux:
blktrace: remove unnessary stop block trace in 'blk_trace_shutdown'
blktrace: fix possible memleak in '__blk_trace_remove'
blktrace: introduce 'blk_trace_{start,stop}' helper
bio: safeguard REQ_ALLOC_CACHE bio put
block, bfq: remove unused variable for bfq_queue
drbd: only clone bio if we have a backing device
ublk_drv: use flexible-array member instead of zero-length array
nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show
nvmet: fix workqueue MEM_RECLAIM flushing dependency
nvme-hwmon: kmalloc the NVME SMART log buffer
nvme-hwmon: consistently ignore errors from nvme_hwmon_init
nvme: add Guenther as nvme-hwmon maintainer
nvme-apple: don't limit DMA segement size
nvme-pci: disable write zeroes on various Kingston SSD
nvme: fix error pointer dereference in error handling
Documentation: document ublk user recovery feature
blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping()
Linus Torvalds [Fri, 21 Oct 2022 22:09:10 +0000 (15:09 -0700)]
Merge tag 'io_uring-6.1-2022-10-20' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix a potential memory leak in the error handling path of io-wq setup
(Rafael)
- Kill an errant debug statement that got added in this release (me)
- Fix an oops with an invalid direct descriptor with IORING_OP_MSG_RING
(Harshit)
- Remove unneeded FFS_SCM flagging (Pavel)
- Remove polling off the exit path (Pavel)
- Move out direct descriptor debug check to the cleanup path (Pavel)
- Use the proper helper rather than open-coding cached request get
(Pavel)
* tag 'io_uring-6.1-2022-10-20' of git://git.kernel.dk/linux:
io-wq: Fix memory leak in worker creation
io_uring/msg_ring: Fix NULL pointer dereference in io_msg_send_fd()
io_uring/rw: remove leftover debug statement
io_uring: don't iopoll from io_ring_ctx_wait_and_kill()
io_uring: reuse io_alloc_req()
io_uring: kill hot path fixed file bitmap debug checks
io_uring: remove FFS_SCM
Linus Torvalds [Fri, 21 Oct 2022 21:43:09 +0000 (14:43 -0700)]
Merge tag 'for-linus-6.1-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Just two fixes for the new 'virtio with grants' feature"
* tag 'for-linus-6.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Convert PAGE_SIZE/PAGE_SHIFT/PFN_UP to Xen counterparts
xen/virtio: Handle cases when page offset > PAGE_SIZE properly
Linus Torvalds [Fri, 21 Oct 2022 21:33:36 +0000 (14:33 -0700)]
Merge tag 'selinux-pr-
20221020' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small SELinux fix for a GFP_KERNEL allocation while a spinlock is
held.
The patch, while still fairly small, is a bit larger than one might
expect from a simple s/GFP_KERNEL/GFP_ATOMIC/ conversion because we
added support for the function to be called with different gfp flags
depending on the context, preserving GFP_KERNEL for those cases that
can safely sleep"
* tag 'selinux-pr-
20221020' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()
Linus Torvalds [Fri, 21 Oct 2022 19:33:03 +0000 (12:33 -0700)]
Merge tag 'mm-hotfixes-stable-2022-10-20' of git://git./linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morron:
"Seventeen hotfixes, mainly for MM.
Five are cc:stable and the remainder address post-6.0 issues"
* tag 'mm-hotfixes-stable-2022-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nouveau: fix migrate_to_ram() for faulting page
mm/huge_memory: do not clobber swp_entry_t during THP split
hugetlb: fix memory leak associated with vma_lock structure
mm/page_alloc: reduce potential fragmentation in make_alloc_exact()
mm: /proc/pid/smaps_rollup: fix maple tree search
mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
mm/mmap: fix MAP_FIXED address return on VMA merge
mm/mmap.c: __vma_adjust(): suppress uninitialized var warning
mm/mmap: undo ->mmap() when mas_preallocate() fails
init: Kconfig: fix spelling mistake "satify" -> "satisfy"
ocfs2: clear dinode links count in case of error
ocfs2: fix BUG when iput after ocfs2_mknod fails
gcov: support GCC 12.1 and newer compilers
zsmalloc: zs_destroy_pool: add size_class NULL check
mm/mempolicy: fix mbind_range() arguments to vma_merge()
mailmap: update email for Qais Yousef
mailmap: update Dan Carpenter's email address
Linus Torvalds [Fri, 21 Oct 2022 19:29:52 +0000 (12:29 -0700)]
Merge tag 'trace-tools-6.1-rc1' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing tool update from Steven Rostedt:
- Make dot2c generate monitor's automata definition static
* tag 'trace-tools-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv/dot2c: Make automaton definition static
Linus Torvalds [Fri, 21 Oct 2022 19:25:39 +0000 (12:25 -0700)]
Merge tag 'linux-watchdog-6.1-rc2' of git://linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add tracing events for the most common watchdog events
* tag 'linux-watchdog-6.1-rc2' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add tracing events for the most usual watchdog events
Rafael J. Wysocki [Fri, 21 Oct 2022 18:07:41 +0000 (20:07 +0200)]
Merge branches 'acpi-scan', 'acpi-resource', 'acpi-apei', 'acpi-extlog' and 'acpi-docs'
Merge assorted ACPI fixes for 6.1-rc2:
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy).
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby).
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra).
- Fix multiple error records handling in one of the ACPI extlog driver
code paths (Tony Luck).
- Prune DSDT override documentation from index after dropping it (Bagas
Sanjaya).
* acpi-scan:
ACPI: scan: Fix DMA range assignment
* acpi-resource:
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
* acpi-apei:
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
* acpi-extlog:
ACPI: extlog: Handle multiple records
* acpi-docs:
Documentation: ACPI: Prune DSDT override documentation from index
Chen Zhongjin [Wed, 27 Jul 2022 03:15:06 +0000 (11:15 +0800)]
x86/unwind/orc: Fix unreliable stack dump with gcov
When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:
# echo l > /proc/sysrq-trigger
[ 477.521031] sysrq: Show backtrace of all active CPUs
[ 477.523813] NMI backtrace for cpu 0
[ 477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
[ 477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
[ 477.526439] Call Trace:
[ 477.526854] <TASK>
[ 477.527216] ? dump_stack_lvl+0xc7/0x114
[ 477.527801] ? dump_stack+0x13/0x1f
[ 477.528331] ? nmi_cpu_backtrace.cold+0xb5/0x10d
[ 477.528998] ? lapic_can_unplug_cpu+0xa0/0xa0
[ 477.529641] ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
[ 477.530393] ? arch_trigger_cpumask_backtrace+0x1d/0x30
[ 477.531136] ? sysrq_handle_showallcpus+0x1b/0x30
[ 477.531818] ? __handle_sysrq.cold+0x4e/0x1ae
[ 477.532451] ? write_sysrq_trigger+0x63/0x80
[ 477.533080] ? proc_reg_write+0x92/0x110
[ 477.533663] ? vfs_write+0x174/0x530
[ 477.534265] ? handle_mm_fault+0x16f/0x500
[ 477.534940] ? ksys_write+0x7b/0x170
[ 477.535543] ? __x64_sys_write+0x1d/0x30
[ 477.536191] ? do_syscall_64+0x6b/0x100
[ 477.536809] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 477.537609] </TASK>
This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.) Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.
Fix it by reverting the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
The original justification for that commit no longer exists. That
original issue was later fixed in a different way, with the following
commit:
f2ac57a4c49d ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")
Fixes:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Ard Biesheuvel [Thu, 20 Oct 2022 13:16:09 +0000 (15:16 +0200)]
efi: runtime: Don't assume virtual mappings are missing if VA == PA == 0
The generic EFI stub can be instructed to avoid SetVirtualAddressMap(),
and simply run with the firmware's 1:1 mapping. In this case, it
populates the virtual address fields of the runtime regions in the
memory map with the physical address of each region, so that the mapping
code has to be none the wiser. Only if SetVirtualAddressMap() fails, the
virtual addresses are wiped and the kernel code knows that the regions
cannot be mapped.
However, wiping amounts to setting it to zero, and if a runtime region
happens to live at physical address 0, its valid 1:1 mapped virtual
address could be mistaken for a wiped field, resulting on loss of access
to the EFI services at runtime.
So let's only assume that VA == 0 means 'no runtime services' if the
region in question does not live at PA 0x0.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Thu, 20 Oct 2022 09:26:42 +0000 (11:26 +0200)]
efi: libstub: Fix incorrect payload size in zboot header
The linker script symbol definition that captures the size of the
compressed payload inside the zboot decompressor (which is exposed via
the image header) refers to '.' for the end of the region, which does
not give the correct result as the expression is not placed at the end
of the payload. So use the symbol name explicitly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Fri, 14 Oct 2022 17:29:57 +0000 (19:29 +0200)]
efi: libstub: Give efi_main() asmlinkage qualification
To stop the bots from sending sparse warnings to me and the list about
efi_main() not having a prototype, decorate it with asmlinkage so that
it is clear that it is called from assembly, and therefore needs to
remain external, even if it is never declared in a header file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Wed, 19 Oct 2022 21:29:58 +0000 (23:29 +0200)]
efi: efivars: Fix variable writes without query_variable_store()
Commit
bbc6d2c6ef22 ("efi: vars: Switch to new wrapper layer")
refactored the efivars layer so that the 'business logic' related to
which UEFI variables affect the boot flow in which way could be moved
out of it, and into the efivarfs driver.
This inadvertently broke setting variables on firmware implementations
that lack the QueryVariableInfo() boot service, because we no longer
tolerate a EFI_UNSUPPORTED result from check_var_size() when calling
efivar_entry_set_get_size(), which now ends up calling check_var_size()
a second time inadvertently.
If QueryVariableInfo() is missing, we support writes of up to 64k -
let's move that logic into check_var_size(), and drop the redundant
call.
Cc: <stable@vger.kernel.org> # v6.0
Fixes:
bbc6d2c6ef22 ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Fri, 14 Oct 2022 10:25:52 +0000 (12:25 +0200)]
efi: ssdt: Don't free memory if ACPI table was loaded successfully
Amadeusz reports KASAN use-after-free errors introduced by commit
3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from
variables"). The problem appears to be that the memory that holds the
new ACPI table is now freed unconditionally, instead of only when the
ACPI core reported a failure to load the table.
So let's fix this, by omitting the kfree() on success.
Cc: <stable@vger.kernel.org> # v6.0
Link: https://lore.kernel.org/all/a101a10a-4fbb-5fae-2e3c-76cf96ed8fbd@linux.intel.com/
Fixes:
3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from variables")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Mon, 17 Oct 2022 10:48:46 +0000 (12:48 +0200)]
efi: libstub: Remove zboot signing from build options
The zboot decompressor series introduced a feature to sign the PE/COFF
kernel image for secure boot as part of the kernel build. This was
necessary because there are actually two images that need to be signed:
the kernel with the EFI stub attached, and the decompressor application.
This is a bit of a burden, because it means that the images must be
signed on the the same system that performs the build, and this is not
realistic for distros.
During the next cycle, we will introduce changes to the zboot code so
that the inner image no longer needs to be signed. This means that the
outer PE/COFF image can be handled as usual, and be signed later in the
release process.
Let's remove the associated Kconfig options now so that they don't end
up in a LTS release while already being deprecated.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Jerry Snitselaar [Wed, 19 Oct 2022 00:44:47 +0000 (08:44 +0800)]
iommu/vt-d: Clean up si_domain in the init_dmars() error path
A splat from kmem_cache_destroy() was seen with a kernel prior to
commit
ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool")
when there was a failure in init_dmars(), because the iommu_domain
cache still had objects. While the mempool code is now gone, there
still is a leak of the si_domain memory if init_dmars() fails. So
clean up si_domain in the init_dmars() error path.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes:
86080ccc223a ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Charlotte Tan [Wed, 19 Oct 2022 00:44:46 +0000 (08:44 +0800)]
iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
arch_rmrr_sanity_check() warns if the RMRR is not covered by an ACPI
Reserved region, but it seems like it should accept an NVS region as
well. The ACPI spec
https://uefi.org/specs/ACPI/6.5/15_System_Address_Map_Interfaces.html
uses similar wording for "Reserved" and "NVS" region types; for NVS
regions it says "This range of addresses is in use or reserved by the
system and must not be used by the operating system."
There is an old comment on this mailing list that also suggests NVS
regions should pass the arch_rmrr_sanity_check() test:
The warnings come from arch_rmrr_sanity_check() since it checks whether
the region is E820_TYPE_RESERVED. However, if the purpose of the check
is to detect RMRR has regions that may be used by OS as free memory,
isn't E820_TYPE_NVS safe, too?
This patch overlaps with another proposed patch that would add the region
type to the log since sometimes the bug reporter sees this log on the
console but doesn't know to include the kernel log:
https://lore.kernel.org/lkml/
20220611204859.234975-3-atomlin@redhat.com/
Here's an example of the "Firmware Bug" apparent false positive (wrapped
for line length):
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR
[0x000000006f760000-0x000000006f762fff], contact BIOS vendor for
fixes
DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR
[0x000000006f760000-0x000000006f762fff]
This is the snippet from the e820 table:
BIOS-e820: [mem 0x0000000068bff000-0x000000006ebfefff] reserved
BIOS-e820: [mem 0x000000006ebff000-0x000000006f9fefff] ACPI NVS
BIOS-e820: [mem 0x000000006f9ff000-0x000000006fffefff] ACPI data
Fixes:
f036c7fa0ab6 ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved")
Cc: Will Mortensen <will@extrahop.com>
Link: https://lore.kernel.org/linux-iommu/64a5843d-850d-e58c-4fc2-0a0eeeb656dc@nec.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216443
Signed-off-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Link: https://lore.kernel.org/r/20220929044449.32515-1-charlotte@extrahop.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu [Wed, 19 Oct 2022 00:44:45 +0000 (08:44 +0800)]
iommu/vt-d: Use rcu_lock in get_resv_regions
Commit
5f64ce5411b46 ("iommu/vt-d: Duplicate iommu_resv_region objects
per device list") converted rcu_lock in get_resv_regions to
dmar_global_lock to allow sleeping in iommu_alloc_resv_region(). This
introduced possible recursive locking if get_resv_regions is called from
within a section where intel_iommu_init() already holds dmar_global_lock.
Especially, after commit
57365a04c921 ("iommu: Move bus setup to IOMMU
device registration"), below lockdep splats could always be seen.
============================================
WARNING: possible recursive locking detected
6.0.0-rc4+ #325 Tainted: G I
--------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_get_resv_regions+0x25/0x270
but task is already holding lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_init+0x36d/0x6ea
...
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5f
__lock_acquire.cold.73+0xad/0x2bb
lock_acquire+0xc2/0x2e0
? intel_iommu_get_resv_regions+0x25/0x270
? lock_is_held_type+0x9d/0x110
down_read+0x42/0x150
? intel_iommu_get_resv_regions+0x25/0x270
intel_iommu_get_resv_regions+0x25/0x270
iommu_create_device_direct_mappings.isra.28+0x8d/0x1c0
? iommu_get_dma_cookie+0x6d/0x90
bus_iommu_probe+0x19f/0x2e0
iommu_device_register+0xd4/0x130
intel_iommu_init+0x3e1/0x6ea
? iommu_setup+0x289/0x289
? rdinit_setup+0x34/0x34
pci_iommu_init+0x12/0x3a
do_one_initcall+0x65/0x320
? rdinit_setup+0x34/0x34
? rcu_read_lock_sched_held+0x5a/0x80
kernel_init_freeable+0x28a/0x2f3
? rest_init+0x1b0/0x1b0
kernel_init+0x1a/0x130
ret_from_fork+0x1f/0x30
</TASK>
This rolls back dmar_global_lock to rcu_lock in get_resv_regions to avoid
the lockdep splat.
Fixes:
57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu [Wed, 19 Oct 2022 00:44:44 +0000 (08:44 +0800)]
iommu: Add gfp parameter to iommu_alloc_resv_region
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Anup Patel [Fri, 21 Oct 2022 06:22:45 +0000 (11:52 +0530)]
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
The kvm_riscv_vcpu_timer_pending() checks per-VCPU next_cycles
and per-VCPU software injected VS timer interrupt. This function
returns incorrect value when Sstc is available because the per-VCPU
next_cycles are only updated by kvm_riscv_vcpu_timer_save() called
from kvm_arch_vcpu_put(). As a result, when Sstc is available the
VCPU does not block properly upon WFI traps.
To fix the above issue, we introduce kvm_riscv_vcpu_timer_sync()
which will update per-VCPU next_cycles upon every VM exit instead
of kvm_riscv_vcpu_timer_save().
Fixes:
8f5cb44b1bae ("RISC-V: KVM: Support sstc extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Andrew Jones [Fri, 21 Oct 2022 06:22:39 +0000 (11:52 +0530)]
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
riscv_cbom_block_size and riscv_init_cbom_blocksize() should always
be available and riscv_init_cbom_blocksize() should always be
invoked, even when compiling without RISCV_ISA_ZICBOM enabled. This
is because disabling RISCV_ISA_ZICBOM means "don't use zicbom
instructions in the kernel" not "pretend there isn't zicbom, even
when there is". When zicbom is available, whether the kernel enables
its use with RISCV_ISA_ZICBOM or not, KVM will offer it to guests.
Ensure we can build KVM and that the block size is initialized even
when compiling without RISCV_ISA_ZICBOM.
Fixes:
8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
Adam Borowski [Mon, 10 Oct 2022 18:33:51 +0000 (20:33 +0200)]
i2c: mlxbf: depend on ACPI; clean away ifdeffage
This fixes maybe_unused warnings/errors.
According to a comment during device tree removal, only ACPI is supported,
thus let's actually require it.
Fixes:
be18c5ede25d ("i2c: mlxbf: remove device tree support")
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Alistair Popple [Wed, 19 Oct 2022 12:29:34 +0000 (23:29 +1100)]
nouveau: fix migrate_to_ram() for faulting page
Commit
16ce101db85d ("mm/memory.c: fix race when faulting a device private
page") changed the migrate_to_ram() callback to take a reference on the
device page to ensure it can't be freed while handling the fault.
Unfortunately the corresponding update to Nouveau to accommodate this
change was inadvertently dropped from that patch causing GPU to CPU
migration to fail so add it here.
Link: https://lkml.kernel.org/r/20221019122934.866205-1-apopple@nvidia.com
Fixes:
16ce101db85d ("mm/memory.c: fix race when faulting a device private page")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>