OSDN Git Service
Frank [Tue, 22 Nov 2022 08:42:32 +0000 (16:42 +0800)]
net: phy: add Motorcomm YT8531S phy id.
We added patch for motorcomm.c to support YT8531S. This patch has
been tested on AM335x platform which has one YT8531S interface
card and passed all test cases.
The tested cases indluding: YT8531S UTP function with support of
10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M;
and YT8531S Combo function that supports auto detection of media type.
Since most functions of YT8531S are similar to YT8521 and we reuse some
codes for YT8521 in the patch file.
Signed-off-by: Frank <Frank.Sae@motor-comm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislav Fomichev [Wed, 23 Nov 2022 04:09:47 +0000 (20:09 -0800)]
net: use %pS for kfree_skb tracing event location
For the cases where 'reason' doesn't give any clue, it's still
nice to be able to track the kfree_skb caller location. %p doesn't
help much so let's use %pS which prints the symbol+offset.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221123040947.1015721-1-sdf@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Thu, 24 Nov 2022 04:15:13 +0000 (20:15 -0800)]
Merge branch 'bonding-fix-bond-recovery-in-mode-2'
Jonathan Toppins says:
====================
bonding: fix bond recovery in mode 2
When a bond is configured with a non-zero updelay and in mode 2 the bond
never recovers after all slaves lose link. The first patch adds
selftests that demonstrate the issue and the second patch fixes the
issue by ignoring the updelay when there are no usable slaves.
====================
Link: https://lore.kernel.org/r/cover.1669147951.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Toppins [Tue, 22 Nov 2022 21:24:29 +0000 (16:24 -0500)]
bonding: fix link recovery in mode 2 when updelay is nonzero
Before this change when a bond in mode 2 lost link, all of its slaves
lost link, the bonding device would never recover even after the
expiration of updelay. This change removes the updelay when the bond
currently has no usable links. Conforming to bonding.txt section 13.1
paragraph 4.
Fixes:
41f891004063 ("bonding: ignore updelay param when there is no active slave")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Toppins [Tue, 22 Nov 2022 20:25:04 +0000 (15:25 -0500)]
selftests: bonding: up/down delay w/ slave link flapping
Verify when a bond is configured with {up,down}delay and the link state
of slave members flaps if there are no remaining members up the bond
should immediately select a member to bring up. (from bonding.txt
section 13.1 paragraph 4)
Suggested-by: Liang Li <liali@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxim Korotkov [Tue, 22 Nov 2022 12:29:01 +0000 (15:29 +0300)]
ethtool: avoiding integer overflow in ethtool_phys_id()
The value of an arithmetic expression "n * id.data" is subject
to possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 23 Nov 2022 20:50:11 +0000 (12:50 -0800)]
Merge branch 'net-complete-conversion-to-i2c_probe_new'
Jakub Kicinski says:
====================
net: Complete conversion to i2c_probe_new
Reposting for Uwe the networking slice of his mega-series:
https://lore.kernel.org/all/
20221118224540.619276-1-uwe@kleine-koenig.org/
so that our build bot can confirm the obvious.
fix mlx5 -> mlxsw while at it.
====================
Link: https://lore.kernel.org/r/20221123045507.2091409-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:07 +0000 (20:55 -0800)]
nfc: st21nfca: i2c: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:06 +0000 (20:55 -0800)]
nfc: st-nci: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:05 +0000 (20:55 -0800)]
nfc: s3fwrn5: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:04 +0000 (20:55 -0800)]
nfc: pn544: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:03 +0000 (20:55 -0800)]
nfc: pn533: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:02 +0000 (20:55 -0800)]
NFC: nxp-nci: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:01 +0000 (20:55 -0800)]
nfc: mrvl: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:55:00 +0000 (20:55 -0800)]
nfc: microread: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:54:59 +0000 (20:54 -0800)]
net/mlxsw: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:54:58 +0000 (20:54 -0800)]
net: dsa: xrs700x: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:54:57 +0000 (20:54 -0800)]
net: dsa: microchip: ksz9477: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König [Wed, 23 Nov 2022 04:54:56 +0000 (20:54 -0800)]
net: dsa: lan9303: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Mon, 21 Nov 2022 21:37:08 +0000 (21:37 +0000)]
sfc: ensure type is valid before updating seen_gen
In the case of invalid or corrupted v2 counter update packets,
efx_tc_rx_version_2() returns EFX_TC_COUNTER_TYPE_MAX. In this case
we should not attempt to update generation counts as this will write
beyond the end of the seen_gen array.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID:
1527356 ("Memory - illegal accesses")
Fixes:
25730d8be5d8 ("sfc: add extra RX channel to receive MAE counter updates on ef100")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislav Fomichev [Mon, 21 Nov 2022 18:29:13 +0000 (10:29 -0800)]
ppp: associate skb with a device at tx
Syzkaller triggered flow dissector warning with the following:
r0 = openat$ppp(0xffffffffffffff9c, &(0x7f0000000000), 0xc0802, 0x0)
ioctl$PPPIOCNEWUNIT(r0, 0xc004743e, &(0x7f00000000c0))
ioctl$PPPIOCSACTIVE(r0, 0x40107446, &(0x7f0000000240)={0x2, &(0x7f0000000180)=[{0x20, 0x0, 0x0, 0xfffff034}, {0x6}]})
pwritev(r0, &(0x7f0000000040)=[{&(0x7f0000000140)='\x00!', 0x2}], 0x1, 0x0, 0x0)
[ 9.485814] WARNING: CPU: 3 PID: 329 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0x1ee0/0x1fa0
[ 9.485929] skb_get_poff+0x53/0xa0
[ 9.485937] bpf_skb_get_pay_offset+0xe/0x20
[ 9.485944] ? ppp_send_frame+0xc2/0x5b0
[ 9.485949] ? _raw_spin_unlock_irqrestore+0x40/0x60
[ 9.485958] ? __ppp_xmit_process+0x7a/0xe0
[ 9.485968] ? ppp_xmit_process+0x5b/0xb0
[ 9.485974] ? ppp_write+0x12a/0x190
[ 9.485981] ? do_iter_write+0x18e/0x2d0
[ 9.485987] ? __import_iovec+0x30/0x130
[ 9.485997] ? do_pwritev+0x1b6/0x240
[ 9.486016] ? trace_hardirqs_on+0x47/0x50
[ 9.486023] ? __x64_sys_pwritev+0x24/0x30
[ 9.486026] ? do_syscall_64+0x3d/0x80
[ 9.486031] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
Flow dissector tries to find skb net namespace either via device
or via socket. Neigher is set in ppp_send_frame, so let's manually
use ppp->dev.
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Reported-by: syzbot+41cab52ab62ee99ed24a@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bagas Sanjaya [Mon, 21 Nov 2022 03:58:55 +0000 (10:58 +0700)]
Documentation: devlink: Add blank line padding on numbered lists in Devlink Port documentation
kernel test robot reported indentation warnings:
Documentation/networking/devlink/devlink-port.rst:220: WARNING: Unexpected indentation.
Documentation/networking/devlink/devlink-port.rst:222: WARNING: Block quote ends without a blank line; unexpected unindent.
These warnings cause lists (arbitration flow for which the warnings blame to
and 3-step subfunction setup) to be rendered inline instead. Also, for the
former list, automatic list numbering is messed up.
Fix these warnings by adding missing blank line padding.
Link: https://lore.kernel.org/linux-doc/202211200926.kfOPiVti-lkp@intel.com/
Fixes:
242dd64375b80a ("Documentation: Add documentation for new devlink-rate attributes")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 23 Nov 2022 04:42:11 +0000 (20:42 -0800)]
Merge branch 'revert-veth-avoid-drop-packets-when-xdp_redirect-performs-and-its-fix'
Heng Qi says:
====================
Revert "veth: Avoid drop packets when xdp_redirect performs" and its fix
This patch
2e0de6366ac16 enables napi of the peer veth automatically when
the veth loads the xdp, but it breaks down as reported by Paolo and John.
So reverting it and its fix, we will rework the patch and make it more
robust based on comments.
====================
Link: https://lore.kernel.org/r/20221122035015.19296-1-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heng Qi [Tue, 22 Nov 2022 03:50:15 +0000 (11:50 +0800)]
Revert "veth: Avoid drop packets when xdp_redirect performs"
This reverts commit
2e0de6366ac16ab4d0abb2aaddbc8a1eba216d11.
Based on the issues reported by John and Paolo and their comments,
this patch and the corresponding fix
5e5dc33d5da are reverted, and
we'll remake it.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heng Qi [Tue, 22 Nov 2022 03:50:14 +0000 (11:50 +0800)]
Revert "bpf: veth driver panics when xdp prog attached before veth_open"
This reverts commit
5e5dc33d5dacb34b0165061bc5a10efd2fd3b66f.
This patch fixes the panic maked by
2e0de6366ac16. Now Paolo
and Toke suggest reverting the patch
2e0de6366ac16 and making
it stronger, so do this first.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 23 Nov 2022 04:41:57 +0000 (20:41 -0800)]
Merge branch 'remove-dsa_priv-h'
Vladimir Oltean says:
====================
Remove dsa_priv.h
After working on the "Autoload DSA tagging driver when dynamically
changing protocol" series:
https://patchwork.kernel.org/project/netdevbpf/cover/
20221115011847.
2843127-1-vladimir.oltean@nxp.com/
it became clear to me that the situation with DSA headers is a bit
messy, and I put the tagging protocol driver macros in a pretty random
temporary spot in dsa_priv.h.
Now is the time to make the net/dsa/ folder a bit more organized, and to
make tagging protocol driver modules include just headers they're going
to use.
Another thing is the merging and cleanup of dsa.c and dsa2.c. Before,
dsa.c had 589 lines and dsa2.c had 1817 lines. Now, the combined dsa.c
has 1749 lines, the rest went to some other places.
Sorry for the set size, I know the rules, but since this is basically
code movement for the most part, I thought more patches are better.
====================
Link: https://lore.kernel.org/r/20221121135555.1227271-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:55 +0000 (15:55 +0200)]
net: dsa: kill off dsa_priv.h
The last remnants in dsa_priv.h are a netlink-related definition for
which we create a new header, and DSA_MAX_NUM_OFFLOADING_BRIDGES which
is only used from dsa.c, so move it there.
Some inclusions need to be adjusted now that we no longer have headers
included transitively from dsa_priv.h.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:54 +0000 (15:55 +0200)]
net: dsa: move tag_8021q headers to their proper place
tag_8021q definitions are all over the place. Some are exported to
linux/dsa/8021q.h (visible by DSA core, taggers, switch drivers and
everyone else), and some are in dsa_priv.h.
Move the structures that don't need external visibility into tag_8021q.c,
and the ones which don't need the world or switch drivers to see them
into tag_8021q.h.
We also have the tag_8021q.h inclusion from switch.c, which is basically
the entire reason why tag_8021q.c was built into DSA in commit
8b6e638b4be2 ("net: dsa: build tag_8021q.c as part of DSA core").
I still don't know how to better deal with that, so leave it alone.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:53 +0000 (15:55 +0200)]
net: dsa: move definitions from dsa_priv.h to slave.c
There are some definitions in dsa_priv.h which are only used from
slave.c. So move them to slave.c.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:52 +0000 (15:55 +0200)]
net: dsa: rename dsa2.c back into dsa.c and create its header
The previous change moved the code into the larger file (dsa2.c) to
minimize the delta. Rename that now to dsa.c, and create dsa.h, where
all related definitions from dsa_priv.h go.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:51 +0000 (15:55 +0200)]
net: dsa: merge dsa.c into dsa2.c
There is no longer a meaningful distinction between what goes into
dsa2.c and what goes into dsa.c. Merge the 2 into a single file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:50 +0000 (15:55 +0200)]
net: dsa: move notifier definitions to switch.h
Reduce bloat in dsa_priv.h by moving the cross-chip notifier data
structures to switch.h.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:49 +0000 (15:55 +0200)]
net: dsa: move dsa_tree_notify() and dsa_broadcast() to switch.c
There isn't an intuitive place for these 2 cross-chip notifier functions
according to the function-to-file classification based on names
(dsa_switch_*() goes to switch.c), but I consider these to be part of
the cross-chip notifier handling, therefore part of switch.c. Move them
there to reduce bloat in dsa2.c (the place where all code with no better
place to go goes).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:48 +0000 (15:55 +0200)]
net: dsa: move headers exported by switch.c to switch.h
Reduce code bloat in dsa_priv.h by moving the prototypes exported by
switch.h into their own header file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:47 +0000 (15:55 +0200)]
net: dsa: move tagging protocol code to tag.{c,h}
It would be nice if tagging protocol drivers could include just the
header they need, since they are (mostly) data path and isolated from
most of the other DSA core code does.
Create a tag.c and a tag.h file which are meant to support tagging
protocol drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:46 +0000 (15:55 +0200)]
net: dsa: move headers exported by slave.c to slave.h
Minimize the use of the bloated dsa_priv.h by moving the prototypes
exported by slave.c to their own header file.
This is just approximate to get the code structure right. There are some
interdependencies with static inline code left in dsa_priv.h, so leave
slave.h included from there for now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:45 +0000 (15:55 +0200)]
net: dsa: move headers exported by c to master.h
Minimize the use of the bloated dsa_priv.h by moving the prototypes
exported by master.c to their own header file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:44 +0000 (15:55 +0200)]
net: dsa: move headers exported by port.c to port.h
Minimize the use of the bloated dsa_priv.h by moving the prototypes
exported by port.c to their own header file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:43 +0000 (15:55 +0200)]
net: dsa: move rest of devlink setup/teardown to devlink.c
The code that needed further refactoring into dedicated functions in
dsa2.c was left aside. Move it now to devlink.c, and make dsa2.c stop
including net/devlink.h.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:42 +0000 (15:55 +0200)]
net: dsa: if ds->setup is true, ds->devlink is always non-NULL
Simplify dsa_switch_teardown() to remove the NULL checking for
ds->devlink.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:41 +0000 (15:55 +0200)]
net: dsa: move bulk of devlink code to devlink.{c,h}
dsa.c and dsa2.c are bloated with too much off-topic code. Identify all
code related to devlink and move it to a new devlink.c file.
Steer clear of the dsa_priv.h dumping ground antipattern and create a
dedicated devlink.h for it, which will be included only by the C files
which need it. Usage of dsa_priv.h will be minimized in later patches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:40 +0000 (15:55 +0200)]
net: dsa: modularize DSA_TAG_PROTO_NONE
There is no reason that I can see why the no-op tagging protocol should
be registered manually, so make it a module and make all drivers which
have any sort of reference to DSA_TAG_PROTO_NONE select it.
Note that I don't know if ksz_get_tag_protocol() really needs this,
or if it's just the logic which is poorly written. All switches seem to
have their own tagging protocol, and DSA_TAG_PROTO_NONE is just a
fallback that never gets used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 21 Nov 2022 13:55:39 +0000 (15:55 +0200)]
net: dsa: unexport dsa_dev_to_net_device()
dsa.o and dsa2.o are linked into the same dsa_core.o, there is no reason
to export this symbol when its only caller is local.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Moshe Shemesh [Sun, 20 Nov 2022 08:36:52 +0000 (10:36 +0200)]
devlink: remove redundant health state set to error
Reporter health_state is set twice to error in devlink_health_report().
Remove second time as it is redundant.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1668933412-5498-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed [Tue, 22 Nov 2022 18:41:58 +0000 (10:41 -0800)]
tcp: Fix build break when CONFIG_IPV6=n
The cited commit caused the following build break when CONFIG_IPV6 was
disabled
net/ipv4/tcp_input.c: In function ‘tcp_syn_flood_action’:
include/net/sock.h:387:37: error: ‘const struct sock_common’ has no member named ‘skc_v6_rcv_saddr’; did you mean ‘skc_rcv_saddr’?
Fix by using inet6_rcv_saddr() macro which handles this situation
nicely.
Fixes:
d9282e48c608 ("tcp: Add listening address to SYN flood message")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
CC: Matthieu Baerts <matthieu.baerts@tessares.net>
CC: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221122184158.170798-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 23 Nov 2022 03:50:20 +0000 (19:50 -0800)]
Merge branch 'i2c/client_device_id_helper-immutable' of git://git./linux/kernel/git/wsa/linux
Pull in a dependency for an API cleanup:
https://lore.kernel.org/all/
20221118224540.619276-1-uwe@kleine-koenig.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 22 Nov 2022 14:36:45 +0000 (15:36 +0100)]
Merge branch 'cleanup-ocelot_stats-exposure'
Colin Foster says:
====================
cleanup ocelot_stats exposure
The ocelot_stats structures became redundant across all users. Replace
this redundancy with a static const struct. After doing this, several
definitions inside include/soc/mscc/ocelot.h no longer needed to be
shared. Patch 2 removes them.
Checkpatch throws an error for a complicated macro not in parentheses. I
understand the reason for OCELOT_COMMON_STATS was to allow expansion, but
interestingly this patch set is essentially reverting the ability for
expansion. I'm keeping the macro in this set, but am open to remove it,
since it doesn't _actually_ provide any immediate benefits anymore.
====================
Link: https://lore.kernel.org/r/20221119231406.3167852-1-colin.foster@in-advantage.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Colin Foster [Sat, 19 Nov 2022 23:14:06 +0000 (15:14 -0800)]
net: mscc: ocelot: issue a warning if stats are incorrectly ordered
Ocelot uses regmap_bulk_read() operations to efficiently read stats
registers. Currently the implementation relies on the stats layout to be
ordered to be most efficient.
Issue a warning if any future implementations happen to break this pattern.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Colin Foster [Sat, 19 Nov 2022 23:14:05 +0000 (15:14 -0800)]
net: mscc: ocelot: remove unnecessary exposure of stats structures
Since commit
4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") there is no longer a need to share the
stats structures to the world. Relocate these definitions to inside
ocelot_stats.c instead of a global include header.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Colin Foster [Sat, 19 Nov 2022 23:14:04 +0000 (15:14 -0800)]
net: mscc: ocelot: remove redundant stats_layout pointers
Ever since commit
4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") the stats_layout entry in ocelot and
felix drivers have become redundant. Remove the unnecessary code.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Björn Töpel [Sat, 19 Nov 2022 17:18:41 +0000 (18:18 +0100)]
selftests: net: Add cross-compilation support for BPF programs
The selftests/net does not have proper cross-compilation support, and
does not properly state libbpf as a dependency. Mimic/copy the BPF
build from selftests/bpf, which has the nice side-effect that libbpf
is built as well.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20221119171841.2014936-1-bjorn@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tiezhu Yang [Sat, 19 Nov 2022 02:55:04 +0000 (10:55 +0800)]
samples: pktgen: Use "grep -E" instead of "egrep"
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl samples/pktgen`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1668826504-32162-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Suman Ghosh [Fri, 18 Nov 2022 05:33:29 +0000 (11:03 +0530)]
octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules
1. If a profile does not support DMAC extraction then avoid installing NPC
flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not
supported by the profile then avoid installing broadcast and multicast
rules.
2. Allow MCAM entry insertion for promiscuous mode.
3. For the profiles where DMAC is not extracted in MKEX key default
unicast entry installed by AF is not valid. Hence do not use action
from the AF installed default unicast entry for such cases.
4. Adjacent packet header fields in a packet like IP header source
and destination addresses or UDP/TCP header source port and destination
can be extracted together in MKEX profile. Therefore MKEX profile can be
configured to in two ways:
a. Total of 4 bytes from start of UDP header(src port
+ destination port)
or
b. Two bytes from start and two bytes from offset 2
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Florian Fainelli [Fri, 18 Nov 2022 21:37:54 +0000 (13:37 -0800)]
net: bcmgenet: Clear RGMII_LINK upon link down
Clear the RGMII_LINK bit upon detecting link down to be consistent with
setting the bit upon link up. We also move the clearing of the
out-of-band disable to the runtime initialization rather than for each
link up/down transition.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221118213754.1383364-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Fri, 18 Nov 2022 15:12:52 +0000 (18:12 +0300)]
net: microchip: sparx5: fix uninitialized variables
Smatch complains that "err" can be uninitialized on these paths. Also
it's just nicer to "return 0;" instead of "return err;"
Fixes:
3a344f99bb55 ("net: microchip: sparx5: Add support for TC flower ARP dissector")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y3eg9Ml/LmLR3L3C@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 18 Nov 2022 04:38:43 +0000 (04:38 +0000)]
net: fix __sock_gen_cookie()
I was mistaken how atomic64_try_cmpxchg(&sk_cookie, &res, new)
is working.
I was assuming @res would contain the final sk_cookie value,
regardless of the success of our cmpxchg()
We could do something like:
if (atomic64_try_cmpxchg(&sk_cookie, &res, new)
res = new;
But we can avoid a conditional and read sk_cookie again.
atomic64_cmpxchg(&sk_cookie, res, new);
res = atomic64_read(&sk_cookie);
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID:
1527347 ("Error handling issues")
Fixes:
4ebf802cf1c6 ("net: __sock_gen_cookie() cleanup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221118043843.3703186-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Mon, 21 Nov 2022 13:09:08 +0000 (13:09 +0000)]
Merge branch 'mptcp-netlink'
Mat Martineau says:
====================
mptcp: More specific netlink command errors
This series makes the error reporting for the MPTCP_PM_CMD_ADD_ADDR netlink
command more specific, since there are multiple reasons the command could
fail.
Note that patch 2 adds a GENL_SET_ERR_MSG_FMT() macro to genetlink.h,
which is outside the MPTCP subsystem.
Patch 1 refactors in-kernel listening socket and endpoint creation to
simplify the second patch.
Patch 2 updates the error values returned by the in-kernel path manager
when it fails to create a local endpoint.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 18 Nov 2022 18:46:08 +0000 (10:46 -0800)]
mptcp: more detailed error reporting on endpoint creation
Endpoint creation can fail for a number of reasons; in case of failure
append the error number to the extended ack message, using a newly
introduced generic helper.
Additionally let mptcp_pm_nl_append_new_local_addr() report different
error reasons.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 18 Nov 2022 18:46:07 +0000 (10:46 -0800)]
mptcp: deduplicate error paths on endpoint creation
When endpoint creation fails, we need to free the newly allocated
entry and eventually destroy the paired mptcp listener socket.
Consolidate such action in a single point let all the errors path
reach it.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima [Fri, 18 Nov 2022 18:25:06 +0000 (10:25 -0800)]
net: Return errno in sk->sk_prot->get_port().
We assume the correct errno is -EADDRINUSE when sk->sk_prot->get_port()
fails, so some ->get_port() functions return just 1 on failure and the
callers return -EADDRINUSE instead.
However, mptcp_get_port() can return -EINVAL. Let's not ignore the error.
Note the only exception is inet_autobind(), all of whose callers return
-EAGAIN instead.
Fixes:
cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda [Fri, 18 Nov 2022 00:27:24 +0000 (09:27 +0900)]
net: ethernet: renesas: rswitch: Fix MAC address info
Smatch detected the following warning.
drivers/net/ethernet/renesas/rswitch.c:1717 rswitch_init() warn:
'%pM' cannot be followed by 'n'
The 'n' should be '\n'.
Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes:
3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Nov 2022 11:33:02 +0000 (11:33 +0000)]
Merge branch 'sarx5-VCAP-debugfs'
netdev.vger.kernel.org archive mirror
Steen Hegelund says:
====================
net: Add support for VCAP debugFS in Sparx5
This provides support for getting VCAP instance, VCAP rule and VCAP port
keyset configuration information via the debug file system.
It builds on top of the initial IS2 VCAP support found in these series:
https://lore.kernel.org/all/
20221020130904.
1215072-1-steen.hegelund@microchip.com/
https://lore.kernel.org/all/
20221109114116.
3612477-1-steen.hegelund@microchip.com/
https://lore.kernel.org/all/
20221111130519.
1459549-1-steen.hegelund@microchip.com/
Functionality:
==============
The VCAP API exposes a /sys/kernel/debug/sparx5/vcaps folder containing
the following entries:
- raw_<vcap>_<instance>
This is a raw dump of the VCAP instance with a line for each available
VCAP rule. This information is limited to the VCAP rule address, the
rule size and the rule keyset name as this requires very little
information from the VCAP cache.
This can be used to detect if a valid rule is stored at the correct
address.
- <vcap>_<instance>
This dumps the VCAP instance configuration: address ranges, chain id
ranges, word size of keys and actions etc, and for each VCAP rule the
details of keys (values and masks) and actions are shown.
This is useful when discovering if the expected rule is present and in
which order it will be matched.
- <interface>
This shows the keyset configuration per lookup and traffic type and the
set of sticky bits (common for all interfaces). This is cleared when
shown, so it is possible to sample over a period of time.
It also shows if this port/lookup is enabled for matching in the VCAP.
This can be used to find out which keyset the traffic being sent to a
port, will be matched against, and if such traffic has been seen by one
of the ports.
Delivery:
=========
This is current plan for delivering the full VCAP feature set of Sparx5:
- TC protocol all support for IS2 VCAP
- Sparx5 IS0 VCAP support
- TC policer and drop action support (depends on the Sparx5 QoS support
upstreamed separately)
- Sparx5 ES0 VCAP support
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support
Version History:
================
v2 Removed a 'support' folder (used for integration testing) that had
been added in patch 6/8 by a mistake.
Wrapped long lines.
v1 Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:14 +0000 (22:31 +0100)]
net: microchip: sparx5: Add VCAP debugfs KUNIT test
This tests the functionality of the debugFS support:
- finding valid keyset on an address
- raw VCAP output
- full rule VCAP output
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:13 +0000 (22:31 +0100)]
net: microchip: sparx5: Add VCAP locking to protect rules
This ensures that the VCAP cache and the lists maintained in the VCAP
instance is protected when accessed by different clients.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:12 +0000 (22:31 +0100)]
net: microchip: sparx5: Add VCAP debugFS key/action support for the VCAP API
This add support for displaying the keys and actions in a rule.
The keys and action display format will be determined by the size and the
type of the key or action. The longer keys will typically be displayed as a
hexadecimal byte array.
The actionset is not decoded in full as the Sparx5 IS2 only has one
supported action, so this will be added later with other VCAP types.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:11 +0000 (22:31 +0100)]
net: microchip: sparx5: Add VCAP rule debugFS support for the VCAP API
This add support to show all rules in a VCAP instance. The information
shown is:
- rule id
- address range
- size
- chain id
- keyset name, subword size, register span
- actionset name, subword size, register span
- counter value
- sticky bit (one bit width counter)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:10 +0000 (22:31 +0100)]
net: microchip: sparx5: Add raw VCAP debugFS support for the VCAP API
This adds support for decoding VCAP rules with a minimum number of
attributes: address, rule size and keyset.
This allows for a quick inspection of a VCAP instance to determine if the
rule are present and in the correct order.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:09 +0000 (22:31 +0100)]
net: microchip: sparx5: Add VCAP debugFS support
Add a debugFS root folder for Sparx5 and add a vcap folder underneath with
the VCAP instances and the ports
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:08 +0000 (22:31 +0100)]
net: microchip: sparx5: Ensure VCAP last_used_addr is set back to default
This ensures that the last_used_addr in a VCAP instance is returned to the
default value when all rules have been deleted.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund [Thu, 17 Nov 2022 21:31:07 +0000 (22:31 +0100)]
net: microchip: sparx5: Ensure L3 protocol has a default value
This ensures that the l3_proto always have a valid value and that any
dissector parsing errors causes the flower rule to be discarded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Nov 2022 10:52:14 +0000 (10:52 +0000)]
Merge branch 'gve-alternate-missed-completions'
Jeroen de Borst says:
====================
gve: Handle alternate miss-completions
Some versions of the virtual NIC present miss-completions in
an alternative way. Let the diver handle these alternate completions
and announce this capability to the device.
The capability is announced uing a new AdminQ command that sends
driver information to the device. The device can refuse a driver
if it is lacking support for a capability, or it can adopt it's
behavior to work around OS specific issues.
Changed in v5:
- Removed comments in fucntion calls
- Switched ENOTSUPP back to EOPNOTSUPP and made sure it gets passed
Changed in v4:
- Clarified new AdminQ command in cover letter
- Changed EOPNOTSUPP to ENOTSUPP to match device's response
Changed in v3:
- Rewording cover letter
- Added 'Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>'
Changes in v2:
- Changed the subject to include 'gve:'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeroen de Borst [Thu, 17 Nov 2022 16:27:01 +0000 (08:27 -0800)]
gve: Handle alternate miss completions
The virtual NIC has 2 ways of indicating a miss-path
completion. This handles the alternate.
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeroen de Borst [Thu, 17 Nov 2022 16:27:00 +0000 (08:27 -0800)]
gve: Adding a new AdminQ command to verify driver
Check whether the driver is compatible with the device
presented.
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Vyukov [Thu, 17 Nov 2022 16:21:01 +0000 (17:21 +0100)]
NFC: nci: Extend virtual NCI deinit test
Extend the test to check the scenario when NCI core tries to send data
to already closed device to ensure that nothing bad happens.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Bongsu Jeon <bongsu.jeon@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Nov 2022 10:36:04 +0000 (10:36 +0000)]
Merge branch 'axiennet-mdio-bus-freq'
Andy Chiu says:
====================
net: axienet: Use a DT property to configure frequency of the MDIO bus
Some FPGA platforms have to set frequency of the MDIO bus lower than 2.5
MHz. Thus, we use a DT property, which is "clock-frequency", to work
with it at boot time. The default 2.5 MHz would be set if the property
is not pressent. Also, factor out mdio enable/disable functions due to
the api change since
253761a0e61b7.
Changelog:
--- v5 ---
1. Make dt-binding patch prior to the implementation patch.
2. Disable mdio bus in error path.
3. Update description of some functions.
--- v4 ---
1. change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ as suggested by Andrew.
--- v3 RESEND ---
1. Repost the exact same patch again
--- v3 ---
1. Fix coding style, and make probing of the driver fail if MDC overflow
--- v2 ---
1. Use clock-frequency, as defined in mdio.yaml, to configure MDIO
clock.
2. Only print out frequency if it is set to a non-standard value.
3. Reduce the scope of axienet_mdio_enable and remove
axienet_mdio_disable because no one really uses it anymore.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Chiu [Thu, 17 Nov 2022 15:40:14 +0000 (23:40 +0800)]
net: axienet: set mdio clock according to bus-frequency
Some FPGA platforms have 80KHz MDIO bus frequency constraint when
connecting Ethernet to its on-board external Marvell PHY. Thus, we may
have to set MDIO clock according to the DT. Otherwise, use the default
2.5 MHz, as specified by 802.3, if the entry is not present.
Also, change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ because we may actually
set MDIO bus frequency higher than 2.5MHz if undelying devices support
it. And properly disable the mdio bus clock in error path.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Chiu [Thu, 17 Nov 2022 15:40:13 +0000 (23:40 +0800)]
dt-bindings: describe the support of "clock-frequency" in mdio
mdio bus frequency is going to be configurable at boottime by a property
in DT now, so add a description to it.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Chiu [Thu, 17 Nov 2022 15:40:12 +0000 (23:40 +0800)]
net: axienet: Unexport and remove unused mdio functions
Both axienet_mdio_{enable/disable} functions are no longer used in
xilinx_axienet_main.c due to
253761a0e61b7. And axienet_mdio_disable is
not even used in the mdio.c. So unexport and remove them.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 17 Nov 2022 15:29:05 +0000 (18:29 +0300)]
net: microchip: sparx5: prevent uninitialized variable
Smatch complains that:
drivers/net/ethernet/microchip/sparx5/sparx5_dcb.c:112
sparx5_dcb_apptrust_validate() error: uninitialized symbol 'match'.
This would only happen if the:
if (sparx5_dcb_apptrust_policies[i].nselectors != nselectors)
condition is always true (they are not equal). The "nselectors"
variable comes from dcbnl_ieee_set() and it is a number between 0-256.
This seems like a probably a real bug.
Fixes:
23f8382cd95d ("net: microchip: sparx5: add support for apptrust")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Thu, 17 Nov 2022 14:29:53 +0000 (15:29 +0100)]
net: ethernet: mtk_eth_soc: fix RSTCTRL_PPE{0,1} definitions
Fix RSTCTRL_PPE0 and RSTCTRL_PPE1 register mask definitions for
MTK_NETSYS_V2.
Remove duplicated definitions.
Fixes:
160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Thu, 17 Nov 2022 13:28:12 +0000 (14:28 +0100)]
net: microchip: sparx5: kunit test: Fix compile warnings.
When VCAP_KUNIT_TEST is enabled the following warnings are generated:
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:257:34: warning: Using plain integer as NULL pointer
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:258:41: warning: Using plain integer as NULL pointer
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:342:23: warning: Using plain integer as NULL pointer
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:359:23: warning: Using plain integer as NULL pointer
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:1327:34: warning: Using plain integer as NULL pointer
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:1328:41: warning: Using plain integer as NULL pointer
Therefore fix this.
Fixes:
dccc30cc4906 ("net: microchip: sparx5: Add KUNIT test of counters and sorted rules")
Fixes:
c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API")
Fixes:
67d637516fa9 ("net: microchip: sparx5: Adding KUNIT test for the VCAP API")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Nov 2022 08:51:36 +0000 (08:51 +0000)]
Merge branch 'nfp-ipsec-offload'
Simon Horman says:
====================
nfp: IPsec offload support
Huanhuan Wang says:
this series adds support for IPsec offload to the NFP driver.
It covers three enhancements:
1. Patches 1/3:
- Extend the capability word and control word to to support
new features.
2. Patch 2/3:
- Add framework to support IPsec offloading for NFP driver,
but IPsec offload control plane interface xfrm callbacks which
interact with upper layer are not implemented in this patch.
3. Patch 3/3:
- IPsec control plane interface xfrm callbacks are implemented
in this patch.
Changes since v3
* Remove structure fields that describe firmware but
are not used for Kernel offload
* Add WARN_ON(!xa_empty()) before call to xa_destroy()
* Added helpers for hash methods
Changes since v2
* OFFLOAD_HANDLE_ERROR macro and the associated code removed
* Unnecessary logging removed
* Hook function xdo_dev_state_free in struct xfrmdev_ops removed
* Use Xarray to maintain SA entries
Changes since v1
* Explicitly return failure when XFRM_STATE_ESN is set
* Fix the issue that AEAD algorithm is not correctly offloaded
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Huanhuan Wang [Thu, 17 Nov 2022 13:21:02 +0000 (14:21 +0100)]
nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer
Xfrm callbacks are implemented to offload SA info into firmware
by mailbox. It supports 16K SA info in total.
Expose ipsec offload feature to upper layer, this feature will
signal the availability of the offload.
Based on initial work of Norm Bagley <norman.bagley@netronome.com>.
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huanhuan Wang [Thu, 17 Nov 2022 13:21:01 +0000 (14:21 +0100)]
nfp: add framework to support ipsec offloading
A new metadata type and config structure are introduced to
interact with firmware to support ipsec offloading. This
feature relies on specific firmware that supports ipsec
encrypt/decrypt by advertising related capability bit.
The xfrm callbacks which interact with upper layer are
implemented in the following patch.
Based on initial work of Norm Bagley <norman.bagley@netronome.com>.
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yinjun Zhang [Thu, 17 Nov 2022 13:21:00 +0000 (14:21 +0100)]
nfp: extend capability and control words
Currently the 32-bit capability word is almost exhausted, now
allocate some more words to support new features, and control
word is also extended accordingly. Packet-type offloading is
implemented in NIC application firmware, but it's not used in
kernel driver, so reserve this bit here in case it's redefined
for other use.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Wed, 16 Nov 2022 16:59:44 +0000 (10:59 -0600)]
bna: Avoid clashing function prototypes
When built with Control Flow Integrity, function prototypes between
caller and function declaration must match. These mismatches are visible
at compile time with the new -Wcast-function-type-strict in Clang[1].
Fix a total of 227 warnings like these:
drivers/net/ethernet/brocade/bna/bna_enet.c:519:3: warning: cast from 'void (*)(struct bna_ethport *, enum bna_ethport_event)' to 'bfa_fsm_t' (aka 'void (*)(void *, int)') converts to incompatible function type [-Wcast-function-type-strict]
bfa_fsm_set_state(ethport, bna_ethport_sm_down);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The bna state machine code heavily overloads its state machine functions,
so these have been separated into their own sets of structs, enums,
typedefs, and helper functions. There are almost zero binary code changes,
all seem to be related to header file line numbers changing, or the
addition of the new stats helper.
Important to mention is that while I was manually implementing this changes
I was staring at this[2] patch from Kees Cook. Thanks, Kees. :)
Link: https://github.com/KSPP/linux/issues/240
[1] https://reviews.llvm.org/
D134831
[2] https://lore.kernel.org/linux-hardening/
20220929230334.
2109344-1-keescook@chromium.org/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Wed, 16 Nov 2022 08:07:34 +0000 (09:07 +0100)]
net: ethernet: mediatek: ppe: assign per-port queues for offloaded traffic
Keeps traffic sent to the switch within link speed limits
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221116080734.44013-7-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Felix Fietkau [Wed, 16 Nov 2022 08:07:33 +0000 (09:07 +0100)]
net: dsa: tag_mtk: assign per-port queues
Keeps traffic sent to the switch within link speed limits
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221116080734.44013-6-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Felix Fietkau [Wed, 16 Nov 2022 08:07:32 +0000 (09:07 +0100)]
net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues
When sending traffic to multiple ports with different link speeds, queued
packets to one port can drown out tx to other ports.
In order to better handle transmission to multiple ports, use the hardware
shaper feature to implement weighted fair queueing between ports.
Weight and maximum rate are automatically adjusted based on the link speed
of the port.
The first 3 queues are unrestricted and reserved for non-DSA direct tx on
GMAC ports. The following queues are automatically assigned by the MTK DSA
tag driver based on the target port number.
The PPE offload code configures the queues for offloaded traffic in the same
way.
This feature is only supported on devices supporting QDMA. All queues still
share the same DMA ring and descriptor pool.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221116080734.44013-5-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Felix Fietkau [Wed, 16 Nov 2022 08:07:31 +0000 (09:07 +0100)]
net: ethernet: mtk_eth_soc: avoid port_mg assignment on MT7622 and newer
On newer chips, this field is unused and contains some bits related to queue
assignment. Initialize it to 0 in those cases.
Fix offload_version on MT7621 and MT7623, which still need the previous value.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221116080734.44013-4-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Felix Fietkau [Wed, 16 Nov 2022 08:07:30 +0000 (09:07 +0100)]
net: ethernet: mtk_eth_soc: drop packets to WDMA if the ring is full
Improves handling of DMA ring overflow.
Clarify other WDMA drop related comment.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221116080734.44013-3-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Felix Fietkau [Wed, 16 Nov 2022 08:07:29 +0000 (09:07 +0100)]
net: ethernet: mtk_eth_soc: increase tx ring size for QDMA devices
In order to use the hardware traffic shaper feature, a larger tx ring is
needed, especially for the scratch ring, which the hardware shaper uses to
reorder packets.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221116080734.44013-2-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Wed, 16 Nov 2022 10:24:50 +0000 (11:24 +0100)]
net: fman: remove reference to non-existing config PCS
Commit
a7c2a32e7f22 ("net: fman: memac: Use lynx pcs driver") makes the
Freescale Data-Path Acceleration Architecture Frame Manager use lynx pcs
driver by selecting PCS_LYNX.
It also selects the non-existing config PCS as well, which has no effect.
Remove this select to a non-existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20221116102450.13928-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 18 Nov 2022 03:39:03 +0000 (19:39 -0800)]
netlink: remove the flex array from struct nlmsghdr
I've added a flex array to struct nlmsghdr in
commit
738136a0e375 ("netlink: split up copies in the ack construction")
to allow accessing the data easily. It leads to warnings with clang,
if user space wraps this structure into another struct and the flex
array is not at the end of the container.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/all/20221114023927.GA685@u2004-local/
Link: https://lore.kernel.org/r/20221118033903.1651026-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Schspa Shi [Wed, 16 Nov 2022 11:45:11 +0000 (19:45 +0800)]
mrp: introduce active flags to prevent UAF when applicant uninit
The caller of del_timer_sync must prevent restarting of the timer, If
we have no this synchronization, there is a small probability that the
cancellation will not be successful.
And syzbot report the fellowing crash:
==================================================================
BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline]
BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
Write at addr
f9ff000024df6058 by task syz-fuzzer/2256
Pointer tag: [f9], memory tag: [fe]
CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008-
ge01d50cbd6ee #0
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156
dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline]
show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x1a8/0x4a0 mm/kasan/report.c:395
kasan_report+0x94/0xb4 mm/kasan/report.c:495
__do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320
do_bad_area arch/arm64/mm/fault.c:473 [inline]
do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749
do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825
el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367
el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427
el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576
hlist_add_head include/linux/list.h:929 [inline]
enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
mod_timer+0x14/0x20 kernel/time/timer.c:1161
mrp_periodic_timer_arm net/802/mrp.c:614 [inline]
mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627
call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474
expire_timers+0x98/0xc4 kernel/time/timer.c:1519
To fix it, we can introduce a new active flags to make sure the timer will
not restart.
Reported-by: syzbot+6fd64001c20aa99e34a4@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Nov 2022 12:09:20 +0000 (12:09 +0000)]
Merge tag 'rxrpc-next-
20221116' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix oops and missing config conditionals
The patches that were pulled into net-next previously[1] had some issues
that this patchset fixes:
(1) Fix missing IPV6 config conditionals.
(2) Fix an oops caused by calling udpv6_sendmsg() directly on an AF_INET
socket.
(3) Fix the validation of network addresses on entry to socket functions
so that we don't allow an AF_INET6 address if we've selected an
AF_INET transport socket.
Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 17 Nov 2022 09:26:41 +0000 (09:26 +0000)]
net: fix napi_disable() logic error
Dan reported a new warning after my recent patch:
New smatch warnings:
net/core/dev.c:6409 napi_disable() error: uninitialized symbol 'new'.
Indeed, we must first wait for STATE_SCHED and STATE_NPSVC to be cleared,
to make sure @new variable has been initialized properly.
Fixes:
4ffa1d1c6842 ("net: adopt try_cmpxchg() in napi_{enable|disable}()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 17 Nov 2022 07:44:02 +0000 (10:44 +0300)]
rxrpc: uninitialized variable in rxrpc_send_ack_packet()
The "pkt" was supposed to have been deleted in a previous patch. It
leads to an uninitialized variable bug.
Fixes:
72f0c6fb0579 ("rxrpc: Allocate ACK records at proposal and queue for transmission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 17 Nov 2022 07:43:38 +0000 (10:43 +0300)]
rxrpc: fix rxkad_verify_response()
The error handling for if skb_copy_bits() fails was accidentally deleted
so the rxkad_decrypt_ticket() function is not called.
Fixes:
5d7edbc9231e ("rxrpc: Get rid of the Rx ring")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Wed, 16 Nov 2022 23:58:46 +0000 (00:58 +0100)]
net: ethernet: mtk_eth_soc: remove cpu_relax in mtk_pending_work
Get rid of cpu_relax in mtk_pending_work routine since MTK_RESETTING is
set only in mtk_pending_work() and it runs holding rtnl lock
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>