OSDN Git Service
Jani Nikula [Mon, 20 Apr 2020 14:04:38 +0000 (17:04 +0300)]
drm/i915: drop a bunch of superfluous inlines
Remove a number of inlines from .c files, and let the compiler decide
what's best. There's more to do, but need to start somewhere, and need
to start setting the example.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420140438.14672-2-jani.nikula@intel.com
Jani Nikula [Mon, 20 Apr 2020 14:04:37 +0000 (17:04 +0300)]
drm/i915/hdmi: remove unused intel_hdmi_hdcp2_protocol()
Unused, hiding from the compiler warnings behind the inline keyword.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420140438.14672-1-jani.nikula@intel.com
Matt Roper [Wed, 15 Apr 2020 23:34:35 +0000 (16:34 -0700)]
drm/i915: Use single set of AUX powerwell ops for gen11+
AUX power wells sometimes need additional handling besides just
programming the specific power well registers:
* Type-C PHY's also require additional Type-C register programming
* ICL combo PHY's require additional workarounds
* TGL & EHL combo PHY's can be treated like any other power well
Today we have dedicated aux ops for the ICL combo PHY and Type-C cases.
This works fine, but means that when a new platform shows up with
identical general power well handling, but different types of PHYs on
its outputs, we have to define an entire new power well table for that
platform and can't just re-use the table from the earlier platform -- as
an example, see ehl_power_wells[], which is a subset of
icl_power_wells[], *except* that we need to specify different AUX ops
for the third display.
If we instead create a single set of top-level aux ops that will check
the PHY type and then dispatch to the appropriate handlers, we can get
more reuse out of our power well definitions. This allows us to
immediately eliminate ehl_power_wells[] and simply reuse the ICL table;
if future platforms follow the same general power well assignments as
either ICL or TGL, we'll be able to re-use those tables in the same way.
Note that I've only changed ICL+ platforms over to using the new icl_aux
ops; at this point it's unlikely that we'll have any new platforms that
re-use gen9 or earlier power well configurations.
v2:
- ICL_AUX_PW_TO_PHY() won't return the proper PHY for TBT AUX power
wells. But we know those wells will only used on Type-C outputs
anyway, so we can just check is is_tc_tbt flag in the condition.
(Jose).
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-2-matthew.d.roper@intel.com
Xiyu Yang [Mon, 20 Apr 2020 05:41:54 +0000 (13:41 +0800)]
drm/i915/selftests: Fix i915_address_space refcnt leak
igt_ppgtt_pin_update() invokes i915_gem_context_get_vm_rcu(), which
returns a reference of the i915_address_space object to "vm" with
increased refcount.
When igt_ppgtt_pin_update() returns, "vm" becomes invalid, so the
refcount should be decreased to keep refcount balanced.
The reference counting issue happens in two exception handling paths of
igt_ppgtt_pin_update(). When i915_gem_object_create_internal() returns
IS_ERR, the refcnt increased by i915_gem_context_get_vm_rcu() is not
decreased, causing a refcnt leak.
Fix this issue by jumping to "out_vm" label when
i915_gem_object_create_internal() returns IS_ERR.
Fixes:
a4e7ccdac38e ("drm/i915: Move context management under GEM")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1587361342-83494-1-git-send-email-xiyuyang19@fudan.edu.cn
Chris Wilson [Mon, 20 Apr 2020 17:27:39 +0000 (18:27 +0100)]
drm/i915/selftests: Exercise dynamic reclocking with RPS
After having testing all the RPS controls individually, we need to take
a step back and check how our RPS worker integrates them to perform
dynamic GPU reclocking. So do that by submitting a spinner and wait and
see what happens.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-6-chris@chris-wilson.co.uk
Chris Wilson [Mon, 20 Apr 2020 17:27:38 +0000 (18:27 +0100)]
drm/i915/selftests: Show the pcode frequency table on error
If we encounter an error while scaling, read back the frequency tables
from the pcu.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-5-chris@chris-wilson.co.uk
Chris Wilson [Mon, 20 Apr 2020 17:27:37 +0000 (18:27 +0100)]
drm/i915/selftests: Split RPS frequency measurement
Split the frequency measurement into two modes, so that we can judge the
impact of the llc setup on top of the pure CS frequency scaling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-4-chris@chris-wilson.co.uk
Chris Wilson [Mon, 20 Apr 2020 17:27:36 +0000 (18:27 +0100)]
drm/i915/selftests: Check RPS controls
Check that the GPU does respond to our RPS frequency requests by setting
our desired frequency.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-3-chris@chris-wilson.co.uk
Chris Wilson [Mon, 20 Apr 2020 17:27:35 +0000 (18:27 +0100)]
drm/i915/selftests: Skip energy consumption tests if not controlling freq
If we can not manipulate the frequency with RPS, then comparing min/max
power consumption is pointless / misleading. We will leave the warning
about not being able to control the frequency selection via RPS to other
tests so as not to confuse this more specialised check.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 20 Apr 2020 17:27:34 +0000 (18:27 +0100)]
drm/i915/selftests: Verify frequency scaling with RPS
One of the core tenents of reclocking the GPU is that its throughput
scales with the clock frequency. We can observe this by incrementing a
loop counter on the GPU, and compare the different execution rates at
the notional RPS frequencies.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-1-chris@chris-wilson.co.uk
Ville Syrjälä [Fri, 17 Apr 2020 15:27:34 +0000 (18:27 +0300)]
drm/i915: Push MST link retraining to the hotplug work
We shouldn't try to do link retraining from the short hpd handler.
We can't take any modeset locks there so this is racy as hell.
Push the whole thing into the hotplug work like we do with SST.
We'll just have to adjust the SST retraining code to deal with
the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and
do a full modeset instead. Stuff like port sync and the tgl+
MST master transcoder stuff maybe doesn't work well if we
try to retrain without following the proper modeset sequence.
So far haven't done any actual tests to confirm that though.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Ville Syrjälä [Fri, 17 Apr 2020 15:27:33 +0000 (18:27 +0300)]
drm/i915: Flatten intel_dp_check_mst_status() a bit
Make intel_dp_check_mst_status() somewhat legible by humans.
Note that the return value of drm_dp_mst_hpd_irq() is always
either 0 or -ENOMEM, and we never did anything with the latter
so we can just ignore the whole thing.
We can also get rid of the direct drm_dp_mst_topology_mgr_set_mst(false)
call since returning -EINVAL causes the caller to do the very same call
for us.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Ville Syrjälä [Fri, 17 Apr 2020 13:47:20 +0000 (16:47 +0300)]
drm/i915: Pass encoder all the way to intel_ddi_transcoder_func_reg_val_get()
Pass the encoder all the way down to
intel_ddi_transcoder_func_reg_val_get(). Allows us eliminate the
intel_ddi_get_crtc_encoder() eyesore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Fri, 17 Apr 2020 13:47:19 +0000 (16:47 +0300)]
drm/i915: Push TRANS_DDI_FUNC_CTL into the encoder->enable() hook
Push the TRANS_DDI_FUNC_CTL into the encoder enable hook. The disable
is already there, and as a followup will enable us to pass the encoder
all the way down.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Fri, 17 Apr 2020 13:47:18 +0000 (16:47 +0300)]
drm/i915: Move the TRANS_DDI_FUNC_CTL enable to a later point
No reason that I can see why we should enable TRANS_DDI_FUNC_CTL
before we set up the watermarks of configure the mbus stuff.
In fact reordering these seems to match the bspec sequence better,
and crucially will allow us to push the TRANS_DDI_FUNC_CTL enable
into the encoder enable hook as a followup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-2-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Fri, 17 Apr 2020 13:47:17 +0000 (16:47 +0300)]
drm/i915: Pass encoder to intel_ddi_enable_pipe_clock()
Since intel_ddi_enable_pipe_clock() was pushed down into the
encoder hooks we can pass on the encoder instead of having
to use intel_ddi_get_crtc_encoder().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Peter Jones [Fri, 6 Jul 2018 19:04:24 +0000 (15:04 -0400)]
Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()
This was sort of annoying me:
random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47
This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().
Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Chris Wilson [Mon, 20 Apr 2020 12:53:56 +0000 (13:53 +0100)]
drm/i915/gt: Move the late flush_submission in retire to the end
Avoid flushing the submission queue (of others) under the client's
timeline lock, but instead move it to the end so that we may catch more.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1066
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420125356.26614-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 20 Apr 2020 12:53:55 +0000 (13:53 +0100)]
drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane
Since moving the obj->vma.list to a spin_lock, and the vm->bound_list to
its vm->mutex, along with tracking shrinkable status under its own
spinlock, we no long require the object to be locked by the caller.
This is fortunate as it appears we can be called with the lock along an
error path in flipping:
<4> [139.942851] WARN_ON(debug_locks && !lock_is_held(&(&((obj)->base.resv)->lock.base)->dep_map))
<4> [139.943242] WARNING: CPU: 0 PID: 1203 at drivers/gpu/drm/i915/gem/i915_gem_domain.c:405 i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943263] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_realtek snd_hda_codec_generic coretemp snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core r8169 lpc_ich snd_pcm realtek prime_numbers [last unloaded: i915]
<4> [139.943347] CPU: 0 PID: 1203 Comm: kms_flip Tainted: G U
5.6.0-gd0fda5c2cf3f1-drmtip_474+ #1
<4> [139.943363] Hardware name: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010
<4> [139.943589] RIP: 0010:i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943589] Code: 85 28 01 00 00 be ff ff ff ff 48 8d 78 60 e8 d7 9b f0 e2 85 c0 75 b9 48 c7 c6 50 b9 38 c0 48 c7 c7 e9 48 3c c0 e8 20 d4 e9 e2 <0f> 0b eb a2 48 c7 c1 08 bb 38 c0 ba 0a 01 00 00 48 c7 c6 88 a3 35
<4> [139.943589] RSP: 0018:
ffffb774c0603b48 EFLAGS:
00010282
<4> [139.943589] RAX:
0000000000000000 RBX:
ffff9a142fa36e80 RCX:
0000000000000006
<4> [139.943589] RDX:
000000000000160d RSI:
ffff9a142c1a88f8 RDI:
ffffffffa434a64d
<4> [139.943589] RBP:
ffff9a1410a513c0 R08:
ffff9a142c1a88f8 R09:
0000000000000000
<4> [139.943589] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff9a1436ee94b8
<4> [139.943589] R13:
0000000000000001 R14:
00000000ffffffff R15:
ffff9a1410960000
<4> [139.943589] FS:
00007fc73a744e40(0000) GS:
ffff9a143da00000(0000) knlGS:
0000000000000000
<4> [139.943589] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [139.943589] CR2:
00007fc73997e098 CR3:
000000002f5fe000 CR4:
00000000000006f0
<4> [139.943589] Call Trace:
<4> [139.943589] intel_pin_and_fence_fb_obj+0x1c9/0x1f0 [i915]
<4> [139.943589] intel_plane_pin_fb+0x3f/0xd0 [i915]
<4> [139.943589] intel_prepare_plane_fb+0x13b/0x5c0 [i915]
<4> [139.943589] drm_atomic_helper_prepare_planes+0x85/0x110
<4> [139.943589] intel_atomic_commit+0xda/0x390 [i915]
<4> [139.943589] drm_atomic_helper_page_flip+0x9c/0xd0
<4> [139.943589] ? drm_event_reserve_init+0x46/0x60
<4> [139.943589] drm_mode_page_flip_ioctl+0x587/0x5d0
This completes the symmetry lost in commit
8b1c78e06e61 ("drm/i915: Avoid
calling i915_gem_object_unbind holding object lock").
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1743
Fixes:
8b1c78e06e61 ("drm/i915: Avoid calling i915_gem_object_unbind holding object lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420125356.26614-1-chris@chris-wilson.co.uk
Lyude Paul [Mon, 13 Apr 2020 21:44:06 +0000 (17:44 -0400)]
drm/i915/dpcd_bl: Unbreak enable_dpcd_backlight modparam
Looks like I accidentally made it so you couldn't force DPCD backlight
support on, whoops. Fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
17f5d57915be ("drm/i915: Force DPCD backlight mode on X1 Extreme 2nd Gen 4K AMOLED panel")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413214407.1851002-1-lyude@redhat.com
Jani Nikula [Fri, 17 Apr 2020 06:51:32 +0000 (09:51 +0300)]
drm/i915/audio: error log non-zero audio power refcount after unbind
We have some module unload/reload tests hitting an issue with i915
unbinding the component interface before the audio driver has properly
put the power. Log an error about it for ease of debugging. (Normally
this leads to a wakeref debug splat on the power well.)
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417065132.23048-1-jani.nikula@intel.com
Jani Nikula [Fri, 17 Apr 2020 13:01:09 +0000 (16:01 +0300)]
drm/i915: fix Sphinx build duplicate label warning
Fix the warning caused by enabling the autosectionlabel extension in the
kernel Sphinx build:
Documentation/gpu/i915.rst:610: WARNING: duplicate label
gpu/i915:layout, other instance in Documentation/gpu/i915.rst
The autosectionlabel extension adds labels to each section title for
cross-referencing, but forbids identical section titles in a
document. With kernel-doc, this includes sections titles in the included
kernel-doc comments.
In the warning message, Sphinx is unable to reference the labels in
their true locations in the kernel-doc comments in source. In this case,
there's "Layout" sections in both gt/intel_workarounds.c and
i915_reg.h. Rename the section in the latter to "File Layout".
Fixes:
58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417130109.12791-1-jani.nikula@intel.com
Michael J. Ruhl [Fri, 17 Apr 2020 19:51:07 +0000 (15:51 -0400)]
drm/i915: Refactor setting dma info to a common helper
DMA_MASK bit values are different for different generations.
This will become more difficult to manage over time with the open
coded usage of different versions of the device.
Fix by:
disallow setting of dma mask in AGP path (< GEN(5) for i915,
add dma_mask_size to the device info configuration,
updating open code call sequence to the latest interface,
refactoring into a common function for setting the dma segment
and mask info
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
cc: Brian Welty <brian.welty@intel.com>
cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417195107.68732-1-michael.j.ruhl@intel.com
Colin Ian King [Fri, 17 Apr 2020 16:08:29 +0000 (17:08 +0100)]
drm/i915: remove redundant assignment to variable test_result
The variable test_result is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417160829.112776-1-colin.king@canonical.com
Anshuman Gupta [Fri, 17 Apr 2020 17:28:35 +0000 (22:58 +0530)]
drm/i915: Add ICL PG3 PW ID for EHL
Gen11 onwards PG3 contains functions for pipe B,
external displays, and VGA. Add missing ICL_DISP_PW_3
for ehl_power_wells.
Cc: Animesh Manna <animesh.manna@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1737
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417172835.15461-1-anshuman.gupta@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 23:04:40 +0000 (16:04 -0700)]
drm/i915/display: Load DP_TP_CTL/STATUS offset before use it
Right now dp.regs.dp_tp_ctl/status are only set during the encoder
pre_enable() hook, what is causing all reads and writes to those
registers to go to offset 0x0 before pre_enable() is executed.
So if i915 takes the BIOS state and don't do a modeset any following
link retraing will fail.
In the case that i915 needs to do a modeset, the DDI disable sequence
will write to a wrong register not disabling DP 'Transport Enable' in
DP_TP_CTL, making a HDMI modeset in the same port/transcoder to
not light up the monitor.
So here for GENs older than 12, that have those registers fixed at
port offset range it is loading at encoder/port init while for GEN12
it will keep setting it at encoder pre_enable() and during HW state
readout.
Fixes:
4444df6e205b ("drm/i915/tgl: move DP_TP_* to transcoder")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414230442.262092-1-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:56 +0000 (12:49 -0700)]
drm/i915/tc: Do not warn when aux power well of static TC ports timeout
This is a expected timeout of static TC ports not conneceted, so
not throwing warnings that would taint CI.
v3:
- moved checks to tc_phy_aux_timeout_expected()
v4:
- moved and add comments to tc_phy_aux_timeout_expected()
v5:
- only checking tc_legacy_port for TC ports
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-8-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:55 +0000 (12:49 -0700)]
drm/i915/tc: Catch TC users accessing FIA registers without enable aux
As described in "drm/i915/tc/icl: Implement TC cold sequences" users
of TC functions should held aux power well during access to avoid
read garbage due HW in TC cold state.
v3:
- renamed is_tc_cold_blocked() to assert_tc_cold_blocked()
- restored the removed 0xffffffff checks
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-7-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:54 +0000 (12:49 -0700)]
drm/i915/tc/tgl: Implement TC cold sequences
TC ports can enter in TCCOLD to save power and is required to request
to PCODE to exit this state before use or read to TC registers.
For TGL there is a new MBOX command to do that with a parameter to ask
PCODE to exit and block TCCOLD entry or unblock TCCOLD entry.
So adding a new power domain to reuse the refcount and only allow
TC cold when all TC ports are not in use.
v2:
- fixed missing case in intel_display_power_domain_str()
- moved tgl_tc_cold_request to intel_display_power.c
- renamed TGL_TC_COLD_OFF to TGL_TC_COLD_OFF_POWER_DOMAINS
- added all TC and TBT aux power domains to
TGL_TC_COLD_OFF_POWER_DOMAINS
v3:
- added one msec sleep when PCODE returns -EAGAIN
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
v4:
- Made failure to block or unblock TC cold a error
- removed 5msec timeout, instead giving PCODE 1msec by up 3 times to
recover from the internal error
v5:
- only sleeping 1msec when ret is -EAGAIN
BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-6-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:53 +0000 (12:49 -0700)]
drm/i915/tc: Skip ref held check for TC legacy aux power wells
As part of ICL TC cold exit sequences we need to request aux power
well before lock the access to TC ports, so skiping the
intel_tc_port_ref_held() check for TC legacy ports.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-5-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:52 +0000 (12:49 -0700)]
drm/i915/tc/icl: Implement TC cold sequences
This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.
Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.
So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.
The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.
Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.
v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access
v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN
v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future
BSpec: 21750
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-4-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:51 +0000 (12:49 -0700)]
drm/i915/display: Split hsw_power_well_enable() into two
This is a preparation for ICL TC cold exit sequences.
v2:
- renamed new functions to hsw_power_well_enable_prepare()/complete()
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-3-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:50 +0000 (12:49 -0700)]
drm/i915/display: Add intel_legacy_aux_to_power_domain()
This is a similar function to intel_aux_power_domain() but it do not
care about TBT ports, this will be needed by ICL TC sequences.
v2:
- renamed to intel_legacy_aux_to_power_domain()
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-2-jose.souza@intel.com
José Roberto de Souza [Tue, 14 Apr 2020 19:49:49 +0000 (12:49 -0700)]
drm/i915/display: Move out code to return the digital_port of the aux ch
Moving the code to return the digital port of the aux channel also
removing the intel_phy_is_tc() to make it generic.
digital_port will be needed in icl_tc_phy_aux_power_well_enable()
so adding it as a parameter to icl_tc_port_assert_ref_held().
While at at removing the duplicated call to icl_tc_phy_aux_ch() in
icl_tc_port_assert_ref_held().
v2:
- fixed build when DRM_I915_DEBUG_RUNTIME_PM is not set
- moved to before hsw_wait_for_power_well_enable() as it will be
needed by hsw_wait_for_power_well_enable() in a future patch
v4:
- fixed action of if (!dig_port), continue instead of return
Cc: You-Sheng Yang <vicamo@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-1-jose.souza@intel.com
José Roberto de Souza [Thu, 16 Apr 2020 18:58:41 +0000 (11:58 -0700)]
drm/i915: Add missing deinitialization cases of load failure
The intel_display_power_put_async() used in TC cold sequences made
easy to hit the missing deinitialization of driver in case of load
failure as seen in the stack trace bellow.
intel_modeset_driver_remove_noirq() had to be removed from
i915_driver_modeset_remove_noirq() as those are different
initialialition steps with IRQ and GEM initialization in between then.
[drm:__intel_engine_init_ctx_wa [i915]] Initialized 3 context workarounds on rcs'0
[drm:__i915_inject_probe_error [i915]] Injecting failure -19 at checkpoint 36 [__uc_init:294]
[drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind
[drm:edp_panel_vdd_off_sync [i915]] Turning [ENCODER:275:DDI A] VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
[drm:intel_power_well_disable [i915]] disabling AUX A
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 1142 Comm: kworker/u16:20 Tainted: G U 5.6.0-CI-Patchwork_17226+ #1
Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2457.A16.
1912270059 12/27/2019
Workqueue: events_unbound intel_display_power_put_async_work [i915]
RIP: 0010:__intel_display_power_put_domain+0xa5/0x180 [i915]
Code: 48 85 c0 78 54 44 89 e1 41 bd 01 00 00 00 49 c7 c4 80 44 41 a0 49 d3 e5 eb 0d 48 83 eb 10 48 3b 9d 08 ad 00 00 78 32 48 8b 03 <4c> 85 68 10 74 ea 8b 53 08 85 d2 74 2d 83 ea 01 85 d2 89 53 08 75
RSP: 0018:
ffffc9000061fdb0 EFLAGS:
00010206
RAX:
6b6b6b6b6b6b6b6b RBX:
ffff8884948f5df0 RCX:
000000000000003d
RDX:
0000000080000001 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffff888479be0000 R08:
ffff88849a180920 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffffffffa0414480
R13:
2000000000000000 R14:
ffff888479beb320 R15:
2000000000000000
FS:
0000000000000000(0000) GS:
ffff88849ff80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00005634fa8ed670 CR3:
0000000005610004 CR4:
0000000000760ee0
PKRU:
55555554
Call Trace:
release_async_put_domains+0x9b/0x110 [i915]
intel_display_power_put_async_work+0x91/0xf0 [i915]
process_one_work+0x260/0x600
? worker_thread+0xc9/0x380
worker_thread+0x37/0x380
? process_one_work+0x600/0x600
kthread+0x119/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x24/0x50
Modules linked in: i915(+) vgem snd_hda_codec_hdmi mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul cdc_ether usbnet mii snd_intel_dspcfg ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core e1000e ptp mei_me snd_pcm pps_core mei intel_lpss_pci prime_numbers [last unloaded: i915]
---[ end trace
b402d1b4060f8b97 ]---
BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1142, name: kworker/u16:20
INFO: lockdep is turned off.
Preemption disabled at:
[<
0000000000000000>] 0x0
CPU: 3 PID: 1142 Comm: kworker/u16:20 Tainted: G UD 5.6.0-CI-Patchwork_17226+ #1
Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2457.A16.
1912270059 12/27/2019
Workqueue: events_unbound intel_display_power_put_async_work [i915]
Call Trace:
dump_stack+0x71/0x9b
___might_sleep+0x178/0x260
wait_for_completion+0x37/0x1a0
virt_efi_query_variable_info+0x161/0x1b0
efi_query_variable_store+0xb3/0x1a0
? efivar_entry_set_safe+0x19c/0x220
efivar_entry_set_safe+0x19c/0x220
? efi_pstore_write+0x10b/0x150
? efi_pstore_write+0xa0/0x150
efi_pstore_write+0x10b/0x150
pstore_dump+0x123/0x340
kmsg_dump+0x87/0x1b0
oops_end+0x3e/0x90
do_general_protection+0x1c3/0x2f0
general_protection+0x2d/0x40
RIP: 0010:__intel_display_power_put_domain+0xa5/0x180 [i915]
Code: 48 85 c0 78 54 44 89 e1 41 bd 01 00 00 00 49 c7 c4 80 44 41 a0 49 d3 e5 eb 0d 48 83 eb 10 48 3b 9d 08 ad 00 00 78 32 48 8b 03 <4c> 85 68 10 74 ea 8b 53 08 85 d2 74 2d 83 ea 01 85 d2 89 53 08 75
RSP: 0018:
ffffc9000061fdb0 EFLAGS:
00010206
RAX:
6b6b6b6b6b6b6b6b RBX:
ffff8884948f5df0 RCX:
000000000000003d
RDX:
0000000080000001 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffff888479be0000 R08:
ffff88849a180920 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffffffffa0414480
R13:
2000000000000000 R14:
ffff888479beb320 R15:
2000000000000000
release_async_put_domains+0x9b/0x110 [i915]
intel_display_power_put_async_work+0x91/0xf0 [i915]
process_one_work+0x260/0x600
? worker_thread+0xc9/0x380
worker_thread+0x37/0x380
? process_one_work+0x600/0x600
kthread+0x119/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x24/0x50
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1142 at kernel/rcu/tree_plugin.h:293 rcu_note_context_switch+0x87/0x650
Modules linked in: i915(+) vgem snd_hda_codec_hdmi mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul cdc_ether usbnet mii snd_intel_dspcfg ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core e1000e ptp mei_me snd_pcm pps_core mei intel_lpss_pci prime_numbers [last unloaded: i915]
v2:
- fixed handling in case of failure in drm_vblank_init()
- moved i915_gem_driver_remove() call to before
i915_driver_modeset_remove_noirq() this match initialization order too
v3:
- reverting call swap between i915_reset_error_state() and i915_gem_driver_remove()
call order
- improved label naming in i915_driver_modeset_probe_noirq()
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1647
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416185841.125686-1-jose.souza@intel.com
Radhakrishna Sripada [Thu, 16 Apr 2020 16:46:10 +0000 (09:46 -0700)]
drm/i915/icl: Update forcewake firmware ranges
Some workarounds are not sticking across suspend resume cycles. The
forcewake ranges table has been updated and would reflect the hardware
appropriately.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1222
v2: Simplify the table and use 0 for some unused ranges(Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416164610.15422-1-radhakrishna.sripada@intel.com
Chris Wilson [Fri, 17 Apr 2020 15:20:18 +0000 (16:20 +0100)]
drm/i915/selftests: Check power consumption at min/max frequencies
A basic premise of RPS is that at lower frequencies, not only do we run
slower, but we save power compared to higher frequencies. For example,
when idle, we set the minimum frequency just in case there is some
residual current. Since the power curve should be a physical
relationship, if we find no power saving it's likely that we've broken
our frequency handling, so test!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152018.13079-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Apr 2020 15:20:17 +0000 (16:20 +0100)]
drm/i915/selftests: Move gpu energy measurement into its own little lib
Move the handy utility to measure the GPU energy consumption using RAPL
msr into a common lib so that it can be reused easily.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152018.13079-1-chris@chris-wilson.co.uk
Stanislav Lisovskiy [Wed, 15 Apr 2020 14:39:04 +0000 (17:39 +0300)]
drm/i915: Add pre/post plane updates for SAGV
Lets have a unified way to handle SAGV changes,
espoecially considering the upcoming Gen12 changes.
Current "standard" way of doing this in commit_tail
is pre/post plane updates, when everything which
has to be forbidden and not supported in new config
has to be restricted before update and relaxed after
plane update.
v2: - Removed unneeded returns(Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415143911.10244-5-stanislav.lisovskiy@intel.com
Stanislav Lisovskiy [Wed, 15 Apr 2020 14:57:40 +0000 (17:57 +0300)]
drm/i915: Prepare to extract gen specific functions from intel_can_enable_sagv
Addressing one of the comments, recommending to extract platform
specific code from intel_can_enable_sagv as a preparation, before
we are going to add support for tgl+.
v2: - Removed whitespace
v3: - Removed premature debug and new cycle introduction(Ville)
- Added missing no active pipes check(Ville)
v4: - Fixed stupid mistake with plane_state caused by stupid macro change
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415145740.28241-1-stanislav.lisovskiy@intel.com
Stanislav Lisovskiy [Wed, 15 Apr 2020 14:39:02 +0000 (17:39 +0300)]
drm/i915: Add intel_atomic_get_bw_*_state helpers
Add correspondent helpers to be able to get old/new bandwidth
global state object.
v2: - Fixed typo in function call
v3: - Changed new functions naming to use convention proposed
by Jani Nikula, i.e intel_bw_* in intel_bw.c file.
v4: - Change function naming back to intel_atomic* pattern,
was decided to rename in a separate patch series.
v5: - Fix function naming to match existing practices(Ville)
v6: - Removed spurious whitespace
v7: - Removed bw_state NULL checks(Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415143911.10244-3-stanislav.lisovskiy@intel.com
Chris Wilson [Fri, 17 Apr 2020 09:39:28 +0000 (10:39 +0100)]
drm/i915/selftests: Take the engine wakeref around __rps_up_interrupt
Since we are touching the device to read the registers, we are required
to ensure the device is awake at the time. Currently, we believe
ourselves to be inside the active request [thus an active engine
wakeref], but since that may be retired in the background, we can
spontaneously lose the wakeref and the ability to probe the HW.
<4> [379.686703] RPM wakelock ref not held during HW access
<4> [379.686805] WARNING: CPU: 7 PID: 4869 at ./drivers/gpu/drm/i915/intel_runtime_pm.h:115 gen12_fwtable_read32+0x233/0x300 [i915]
<4> [379.686808] Modules linked in: i915(+) vgem snd_hda_codec_hdmi mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ax88179_178a usbnet mii ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm e1000e mei_me ptp mei pps_core intel_lpss_pci prime_numbers [last unloaded: i915]
<4> [379.686827] CPU: 7 PID: 4869 Comm: i915_selftest Tainted: G U 5.7.0-rc1-CI-CI_DRM_8313+ #1
<4> [379.686830] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2457.A13.
1912190237 12/19/2019
<4> [379.686883] RIP: 0010:gen12_fwtable_read32+0x233/0x300 [i915]
<4> [379.686887] Code: d8 ea e0 0f 0b e9 19 fe ff ff 80 3d ad 12 2d 00 00 0f 85 17 fe ff ff 48 c7 c7 b0 32 3e a0 c6 05 99 12 2d 00 01 e8 2d d8 ea e0 <0f> 0b e9 fd fd ff ff 8b 05 c4 75 56 e2 85 c0 0f 85 84 00 00 00 48
<4> [379.686889] RSP: 0018:
ffffc90000727970 EFLAGS:
00010286
<4> [379.686892] RAX:
0000000000000000 RBX:
ffff88848cc20ee8 RCX:
0000000000000001
<4> [379.686894] RDX:
0000000080000001 RSI:
ffff88843b1f0900 RDI:
00000000ffffffff
<4> [379.686896] RBP:
0000000000000000 R08:
ffff88843b1f0900 R09:
0000000000000000
<4> [379.686898] R10:
0000000000000000 R11:
0000000000000000 R12:
000000000000a058
<4> [379.686900] R13:
0000000000000001 R14:
ffff88848cc2bf30 R15:
00000000ffffffea
<4> [379.686902] FS:
00007f7d63f5e300(0000) GS:
ffff8884a0180000(0000) knlGS:
0000000000000000
<4> [379.686904] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [379.686907] CR2:
000055e5c30f4988 CR3:
000000042e190002 CR4:
0000000000760ee0
<4> [379.686910] PKRU:
55555554
<4> [379.686911] Call Trace:
<4> [379.686986] live_rps_interrupt+0xb14/0xc10 [i915]
<4> [379.687051] ? intel_rps_unpark+0xb0/0xb0 [i915]
<4> [379.687057] ? __trace_bprintk+0x57/0x80
<4> [379.687143] __i915_subtests+0xb8/0x210 [i915]
<4> [379.687222] ? __i915_live_teardown+0x50/0x50 [i915]
<4> [379.687291] ? __intel_gt_live_setup+0x30/0x30 [i915]
<4> [379.687361] __run_selftests+0x112/0x170 [i915]
<4> [379.687431] i915_live_selftests+0x2c/0x60 [i915]
<4> [379.687491] i915_pci_probe+0x93/0x1b0 [i915]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417093928.17822-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Apr 2020 09:39:27 +0000 (10:39 +0100)]
drm/i915/selftests: Delay spinner before waiting for an interrupt
It seems that although (perhaps because of the memory stall?) the
spinner has signaled that it has started, it still takes some time to
spin up to 100% utilisation of the HW. Since the test depends on the
full utilisation of the HW to trigger the RPS interrupt, wait a little
bit and flush the interrupt status to be sure that the event we see if
from the spinner.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417093928.17822-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 16 Apr 2020 11:41:17 +0000 (12:41 +0100)]
drm/i915/gt: Scrub execlists state on resume
Before we resume, we reset the HW so we restart from a known good state.
However, as a part of the reset process, we drain our pending CS event
queue -- and if we are resuming that does not correspond to internal
state. On setup, we are scrubbing the CS pointers, but alas only on
setup.
Apply the sanitization not just to setup, but to all resumes.
Reported-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416114117.3460-1-chris@chris-wilson.co.uk
Uma Shankar [Thu, 16 Apr 2020 10:54:19 +0000 (16:24 +0530)]
drm/i915/display: Enable DP Display Audio WA
For certain DP VDSC bpp settings, hblank asserts before hblank_early,
leading to a bad audio state. Driver need to program "hblank early
enable" and "samples per line" parameters in AUDIO_CONFIG_BE
register.
This is Display Audio WA #
1406928334 for 4k+VDSC usecase
applicable on DP encoders. Implemented the same.
v2: Fixed build failures on 32bit machine.
v3: Dropped u64, added helpers for sample room calculation,
other general comments as per Jani Nikula's feedback.
Also fixed connector type check (spotted by Anshuman)
v4: Addressed Jani Nikula and Kai's review comments.
v5: Addressed Anshuman's review comment and used crtc_* variable
to get timings.
v6: Dropped a redundant initialization.
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416105419.9664-1-uma.shankar@intel.com
Anshuman Gupta [Wed, 15 Apr 2020 17:05:55 +0000 (22:35 +0530)]
drm/i915: Add i915_lpsp_status debugfs attribute
It requires a separate debugfs attribute to expose lpsp
status to user space, as there may be display less configuration
without any valid connected output, those configuration will not be
able to test lpsp status, if lpsp status exposed from a connector
based debugfs attribute.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-5-anshuman.gupta@intel.com
Anshuman Gupta [Wed, 15 Apr 2020 17:05:54 +0000 (22:35 +0530)]
drm/i915: Add connector dbgfs for all connectors
Add connector debugfs attributes for each intel
connector which is getting register.
v2:
- adding connector debugfs for each connector in
intel_connector_register() to fix CI failure for legacy connectors.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-4-anshuman.gupta@intel.com
Anshuman Gupta [Wed, 15 Apr 2020 17:05:53 +0000 (22:35 +0530)]
drm/i915: Add i915_lpsp_capability debugfs
New i915_pm_lpsp igt solution approach relies on connector specific
debugfs attribute i915_lpsp_capability, it exposes whether an output is
capable of driving lpsp.
v2:
- CI fixup.
v3:
- register i915_lpsp_info only for supported connector. [Jani]
- use intel_display_power_well_is_enabled() instead of looking
inside power_well count. [Jani]
- fixes the lpsp capable conditional logic. [Jani]
- combined the lpsp capable and enable info. [Jani]
v4:
- Separate out connector based debugfs i915_lpsp_capability
lpsp enable status would be exposes by different entry. [Animesh]
v5:
- Add Platform Gen condition to add i915_lpsp_capability
and some cosmetic nitpick changes. [Animesh]
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-3-anshuman.gupta@intel.com
Anshuman Gupta [Wed, 15 Apr 2020 17:05:52 +0000 (22:35 +0530)]
drm/i915: Power well id for ICL PG3
Gen11 onwards PG3 is contains functions for pipe B,
external displays, and VGA. It make sense to add
a power well id with name ICL_DISP_PW_3 rather then
TGL_DISP_PW_3, Also PG3 power well id requires to
know if lpsp is enabled.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-2-anshuman.gupta@intel.com
Joonas Lahtinen [Fri, 17 Apr 2020 06:35:00 +0000 (09:35 +0300)]
drm/i915: Update DRIVER_DATE to
20200417
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Matt Roper [Wed, 15 Apr 2020 23:34:34 +0000 (16:34 -0700)]
drm/i915/tgl: TBT AUX should use TC power well ops
As on ICL, we want to use the Type-C aux handlers for the TBT aux wells
to ensure the DP_AUX_CH_CTL_TBT_IO flag is set properly.
Fixes:
656409bbaf87 ("drm/i915/tgl: Add power well support")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Joonas Lahtinen [Thu, 16 Apr 2020 11:36:38 +0000 (14:36 +0300)]
Merge tag 'topic/phy-compliance-2020-04-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued
Topic pull request for topic/phy-compliance:
- Standardize DP_PHY_TEST_PATTERN name.
- Add support for setting/getting test pattern from sink.
- Implement DP PHY compliance to i915.
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efb3d0d9-2cf7-046b-3a9b-2548d086258e@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joonas Lahtinen [Thu, 16 Apr 2020 11:35:16 +0000 (14:35 +0300)]
Merge drm/drm-next into drm-intel-next-queued
Backmerging in order to pull "topic/phy-compliance".
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oliver Barta [Sat, 28 Mar 2020 10:41:00 +0000 (11:41 +0100)]
drm/i915: HDCP: fix Ri prime check done during link check
The check was always succeeding even in case of a mismatch due to the
HDCP_STATUS_ENC bit being set. Make sure both bits are actually set.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Fixes:
2320175feb74 ("drm/i915: Implement HDCP for HDMI")
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328104100.12162-1-oliver.barta@aptiv.com
Stanislav Lisovskiy [Tue, 7 Apr 2020 21:55:46 +0000 (14:55 -0700)]
drm/i915: Add YUV444 packed format support for skl+
PLANE_CTL_FORMAT_AYUV is already supported, according to hardware
specification.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407215546.5445-2-bob.j.paauwe@intel.com
Chris Wilson [Wed, 15 Apr 2020 17:03:18 +0000 (18:03 +0100)]
drm/i915/gt: Update PMINTRMSK holding fw
If we use a non-forcewaked write to PMINTRMSK, it does not take effect
until much later, if at all, causing a loss of RPS interrupts and no GPU
reclocking, leaving the GPU running at the wrong frequency for long
periods of time.
Reported-by: Francisco Jerez <currojerez@riseup.net>
Suggested-by: Francisco Jerez <currojerez@riseup.net>
Fixes:
35cc7f32c298 ("drm/i915/gt: Use non-forcewake writes for RPS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170318.16771-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 15 Apr 2020 17:03:17 +0000 (18:03 +0100)]
drm/i915/selftests: Exercise basic RPS interrupt generation
Since we depend upon RPS generating interrupts after evaluation
intervals to determine when to up/down clock the GPU, it is imperative
that we successfully enable interrupt generation! Verify that we do see
an interrupt if we keep the GPU busy for an entire EI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170318.16771-1-chris@chris-wilson.co.uk
Matt Roper [Tue, 14 Apr 2020 21:11:18 +0000 (14:11 -0700)]
drm/i915/tgl: Initialize multicast register steering for workarounds
Even though the bspec is missing gen12 register details for the MCR
selector register (0xFDC), this is confirmed by hardware folks to be a
mistake; the register does exist and we do indeed need to steer
multicast register reads to an appropriate instance the same as we did
on gen11.
Note that despite the lack of documentation we were still using the MCR
selector to read INSTDONE and such in read_subslice_reg() too.
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414211118.2787489-4-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Matt Roper [Tue, 14 Apr 2020 21:11:16 +0000 (14:11 -0700)]
drm/i915/tgl: Extend Wa_1409767108:tgl to B0 stepping
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414211118.2787489-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Matt Roper [Tue, 14 Apr 2020 21:11:17 +0000 (14:11 -0700)]
drm/i915/tgl: Add Wa_14010477008:tgl
Media decompression support should not be advertised on any display
planes for steppings A0-C0.
Bspec: 53273
Fixes:
2dfbf9d2873a ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414211118.2787489-3-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Matt Atwood [Mon, 13 Apr 2020 17:53:22 +0000 (13:53 -0400)]
drm/i915/ehl: extended Wa_2006604312 to ehl
Reflect recent bspec changes.
Bspec: 33451
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413175322.12162-1-matthew.s.atwood@intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Stanislav Lisovskiy [Thu, 9 Apr 2020 15:47:18 +0000 (18:47 +0300)]
drm/i915: Start passing latency as parameter
We need to start passing memory latency as a
parameter when calculating plane wm levels,
as latency can get changed in different
circumstances(for example with or without SAGV).
So we need to be more flexible on that matter.
v2: Changed latency type from u32 to unsigned int(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409154730.18568-2-stanislav.lisovskiy@intel.com
Kai Vehmanen [Mon, 30 Mar 2020 14:44:21 +0000 (17:44 +0300)]
drm/i915: do AUD_FREQ_CNTRL state save on all gen9+ platforms
Replace the TGL/ICL specific platform checks with a more generic check
using INTEL_GEN(). Fixes bug with broken audio after S3 resume on JSL
platforms.
An initial version of state save and restore of AUD_FREQ_CNTRL register
was added for subset of platforms in commit
87c1694533c9
("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend"). The state
save has proven to work well and it is needed in newer platforms, so needs
to be extended. Although the logic is not in practise needed on GEN9/10
systems, follow the hardware specification and apply state and restore on
all gen9+ platforms.
Bspec: 49281
Link: https://github.com/thesofproject/linux/issues/1719
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330144421.11632-1-kai.vehmanen@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Linus Torvalds [Sun, 12 Apr 2020 19:35:55 +0000 (12:35 -0700)]
Linux 5.7-rc1
Linus Torvalds [Sun, 12 Apr 2020 18:04:58 +0000 (11:04 -0700)]
MAINTAINERS: sort field names for all entries
This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file. But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.
This was entirely scripted:
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 12 Apr 2020 18:03:52 +0000 (11:03 -0700)]
MAINTAINERS: sort entries by entry name
They are all supposed to be sorted, but people who add new entries don't
always know the alphabet. Plus sometimes the entry names get edited,
and people don't then re-order the entry.
Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time. Fingers crossed.
This was scripted with
/scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS
but then I also ended up manually upper-casing a few entry names that
stood out when looking at the end result.
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 12 Apr 2020 17:17:16 +0000 (10:17 -0700)]
Merge tag 'x86-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of three patches to fix the fallout of the newly added split
lock detection feature.
It addressed the case where a KVM guest triggers a split lock #AC and
KVM reinjects it into the guest which is not prepared to handle it.
Add proper sanity checks which prevent the unconditional injection
into the guest and handles the #AC on the host side in the same way as
user space detections are handled. Depending on the detection mode it
either warns and disables detection for the task or kills the task if
the mode is set to fatal"
* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
KVM: x86: Emulate split-lock access as a write in emulator
x86/split_lock: Provide handle_guest_split_lock()
Linus Torvalds [Sun, 12 Apr 2020 17:13:14 +0000 (10:13 -0700)]
Merge tag 'timers-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull time(keeping) updates from Thomas Gleixner:
- Fix the time_for_children symlink in /proc/$PID/ so it properly
reflects that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time
namespaces, which was half defined but the actual array member was
not added. This went unnoticed as the array has an exessive empty
member at the end but introduced a user visible regression as the
output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
to catch half updated data.
* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ucount: Make sure ucounts in /proc/sys/user don't regress again
time/namespace: Add max_time_namespaces ucount
time/namespace: Fix time_for_children symlink
Linus Torvalds [Sun, 12 Apr 2020 17:09:19 +0000 (10:09 -0700)]
Merge tag 'sched-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes/updates from Thomas Gleixner:
- Deduplicate the average computations in the scheduler core and the
fair class code.
- Fix a raise between runtime distribution and assignement which can
cause exceeding the quota by up to 70%.
- Prevent negative results in the imbalanace calculation
- Remove a stale warning in the workqueue code which can be triggered
since the call site was moved out of preempt disabled code. It's a
false positive.
- Deduplicate the print macros for procfs
- Add the ucmap values to the SCHED_DEBUG procfs output for completness
* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Add task uclamp values to SCHED_DEBUG procfs
sched/debug: Factor out printing formats into common macros
sched/debug: Remove redundant macro define
sched/core: Remove unused rq::last_load_update_tick
workqueue: Remove the warning in wq_worker_sleeping()
sched/fair: Fix negative imbalance in imbalance calculation
sched/fair: Fix race between runtime distribution and assignment
sched/fair: Align rq->avg_idle and rq->avg_scan_cost
Linus Torvalds [Sun, 12 Apr 2020 17:05:24 +0000 (10:05 -0700)]
Merge tag 'perf-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixes/updates for perf:
- Fix the perf event cgroup tracking which tries to track the cgroup
even for disabled events.
- Add Ice Lake server support for uncore events
- Disable pagefaults when retrieving the physical address in the
sampling code"
* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Disable page faults when getting phys address
perf/x86/intel/uncore: Add Ice Lake server uncore support
perf/cgroup: Correct indirection in perf_less_group_idx()
perf/core: Fix event cgroup tracking
Linus Torvalds [Sun, 12 Apr 2020 16:47:10 +0000 (09:47 -0700)]
Merge tag 'locking-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Three small fixes/updates for the locking core code:
- Plug a task struct reference leak in the percpu rswem
implementation.
- Document the refcount interaction with PID_MAX_LIMIT
- Improve the 'invalid wait context' data dump in lockdep so it
contains all information which is required to decode the problem"
* tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Improve 'invalid wait context' splat
locking/refcount: Document interaction with PID_MAX_LIMIT
locking/percpu-rwsem: Fix a task_struct refcount
Linus Torvalds [Sun, 12 Apr 2020 16:41:01 +0000 (09:41 -0700)]
Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Ten cifs/smb fixes:
- five RDMA (smbdirect) related fixes
- add experimental support for swap over SMB3 mounts
- also a fix which improves performance of signed connections"
* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: enable swap on SMB3 mounts
smb3: change noisy error message to FYI
smb3: smbdirect support can be configured by default
cifs: smbd: Do not schedule work to send immediate packet on every receive
cifs: smbd: Properly process errors on ib_post_send
cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
cifs: smbd: Check send queue size before posting a send
cifs: smbd: Merge code to track pending packets
cifs: ignore cached share root handle closing errors
Linus Torvalds [Sun, 12 Apr 2020 16:39:47 +0000 (09:39 -0700)]
Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfix from Trond Myklebust:
"Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()"
* tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS: Fix RCU lock leakage
Linus Torvalds [Sat, 11 Apr 2020 18:38:44 +0000 (11:38 -0700)]
Merge tag 'nios2-v5.7-rc1' of git://git./linux/kernel/git/lftan/nios2
Pull nios2 updates from Ley Foon Tan:
- Remove nios2-dev@lists.rocketboards.org from MAINTAINERS
- remove 'resetvalue' property
- rename 'altr,gpio-bank-width' -> 'altr,ngpio'
- enable the common clk subsystem on Nios2
* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
arch: nios2: remove 'resetvalue' property
arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
arch: nios2: Enable the common clk subsystem on Nios2
Linus Torvalds [Sat, 11 Apr 2020 18:34:36 +0000 (11:34 -0700)]
Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix an integer truncation in dma_direct_get_required_mask
(Kishon Vijay Abraham)
- fix the display of dma mapping types (Grygorii Strashko)
* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix displaying of dma allocation type
dma-direct: fix data truncation in dma_direct_get_required_mask()
Linus Torvalds [Sat, 11 Apr 2020 16:46:12 +0000 (09:46 -0700)]
Merge tag 'kbuild-v5.7-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
Sedat Dilek [Sat, 11 Apr 2020 13:29:43 +0000 (15:29 +0200)]
mailmap: Add Sedat Dilek (replacement for expired email address)
I do not longer work for credativ Germany.
Please, use my private email address instead.
This is for the case when people want to CC me on
patches sent from my old business email address.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trond Myklebust [Sat, 11 Apr 2020 15:37:18 +0000 (11:37 -0400)]
pNFS: Fix RCU lock leakage
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking
the RCU lock.
Fixes:
a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Xiaoyao Li [Fri, 10 Apr 2020 11:54:02 +0000 (13:54 +0200)]
KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
Two types of #AC can be generated in Intel CPUs:
1. legacy alignment check #AC
2. split lock #AC
Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.
If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.
[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
helper function. ]
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
Xiaoyao Li [Fri, 10 Apr 2020 11:54:01 +0000 (13:54 +0200)]
KVM: x86: Emulate split-lock access as a write in emulator
Emulate split-lock accesses as writes if split lock detection is on
to avoid #AC during emulation, which will result in a panic(). This
should never occur for a well-behaved guest, but a malicious guest can
manipulate the TLB to trigger emulation of a locked instruction[1].
More discussion can be found at [2][3].
[1] https://lkml.kernel.org/r/
8c5b11c9-58df-38e7-a514-
dc12d687b198@redhat.com
[2] https://lkml.kernel.org/r/
20200131200134.GD18946@linux.intel.com
[3] https://lkml.kernel.org/r/
20200227001117.GX9940@linux.intel.com
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de
Thomas Gleixner [Fri, 10 Apr 2020 11:54:00 +0000 (13:54 +0200)]
x86/split_lock: Provide handle_guest_split_lock()
Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.
It will inject the #AC blindly into the guest whether the guest is
prepared or not.
Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.
[ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de
Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
Masahiro Yamada [Wed, 8 Apr 2020 18:29:19 +0000 (03:29 +0900)]
kbuild: fix comment about missing include guard detection
The keyword here is 'twice' to explain the trick.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sat, 11 Apr 2020 00:57:48 +0000 (17:57 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
Linus Torvalds [Sat, 11 Apr 2020 00:53:43 +0000 (17:53 -0700)]
Merge tag 'docs-5.7-2' of git://git.lwn.net/linux
Pull Documentation fixes from Jonathan Corbet:
"A handful of late-arriving fixes for the documentation tree"
* tag 'docs-5.7-2' of git://git.lwn.net/linux:
Documentation: android: binderfs: add 'stats' mount option
Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links
docs: driver-api: address duplicate label warning
Documentation: sysrq: fix RST formatting
docs: kernel-parameters.txt: Fix broken references
docs: kernel-parameters.txt: Remove nompx
docs: filesystems: fix typo in qnx6.rst
Linus Torvalds [Sat, 11 Apr 2020 00:50:01 +0000 (17:50 -0700)]
Merge tag 'for-linus-5.7-ofs1' of git://git./linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.
Fix:
- Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he sent a
reversion patch. I had to modify his patch since reverting at this
point broke Orangefs.
Cleanups:
- Christoph Hellwig noticed that we were doing some unnecessary work
in orangefs_flush, so he sent in a patch that removed the un-needed
code.
- Al Viro told me he had trouble building Orangefs. Orangefs should
be easy to build, even for Al :-).
I looked back at the test server build notes in orangefs.txt, just
in case that's where the trouble really is, and found a couple of
typos and made a couple of clarifications"
* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: clarify build steps for test server in orangefs.txt
orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
orangefs: get rid of knob code...
Linus Torvalds [Sat, 11 Apr 2020 00:39:20 +0000 (17:39 -0700)]
Merge tag 'xtensa-
20200410' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- replace setup_irq() by request_irq()
- cosmetic fixes in xtensa Kconfig and boot/Makefile
* tag 'xtensa-
20200410' of git://github.com/jcmvbkbc/linux-xtensa:
arch/xtensa: fix grammar in Kconfig help text
xtensa: remove meaningless export ccflags-y
xtensa: replace setup_irq() by request_irq()
Linus Torvalds [Sat, 11 Apr 2020 00:20:06 +0000 (17:20 -0700)]
Merge tag 'for-linus-5.7-rc1b-tag' of git://git./linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- two cleanups
- fix a boot regression introduced in this merge window
- fix wrong use of memory allocation flags
* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix booting 32-bit pv guest
x86/xen: make xen_pvmmu_arch_setup() static
xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
xen: Use evtchn_type_t as a type for event channels
Vasily Averin [Fri, 10 Apr 2020 21:34:13 +0000 (14:34 -0700)]
ipc/util.c: sysvipc_find_ipc() should increase position index
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 10 Apr 2020 21:34:10 +0000 (14:34 -0700)]
kernel/gcov/fs.c: gcov_seq_next() should increase position index
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 10 Apr 2020 21:34:06 +0000 (14:34 -0700)]
fs/seq_file.c: seq_read(): add info message about buggy .next functions
Patch series "seq_file .next functions should increase position index".
In Aug 2018 NeilBrown noticed commit
1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed. A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps. This will always show the whole
last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition
4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition
4194812 97536 -2
/dev/dm-0 partition
4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*
I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly
https://bugzilla.kernel.org/show_bug.cgi?id=206283
This patch (of 4):
Add debug code to seq_read() to detect missed or out-of-tree incorrect
.next seq_file functions.
[akpm@linux-foundation.org: s/pr_info/pr_info_ratelimited/, per Qian Cai]
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/244674e5-760c-86bd-d08a-047042881748@virtuozzo.com
Link: http://lkml.kernel.org/r/7c24087c-e280-e580-5b0c-0cdaeb14cd18@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kbuild test robot [Fri, 10 Apr 2020 21:34:03 +0000 (14:34 -0700)]
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Fixes:
6c41ac96ad92 ("dmaengine: tegra-apb: Support COMPILE_TEST")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002271133450.2973@hadrien
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pali Rohár [Fri, 10 Apr 2020 21:34:00 +0000 (14:34 -0700)]
change email address for Pali Rohár
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:57 +0000 (14:33 -0700)]
selftests: kmod: test disabling module autoloading
Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.
Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".
Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:53 +0000 (14:33 -0700)]
selftests: kmod: fix handling test numbers above 9
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:50 +0000 (14:33 -0700)]
docs: admin-guide: document the kernel.modprobe sysctl
Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.
[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:47 +0000 (14:33 -0700)]
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().
The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.
Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().
Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.
Fixes:
41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:43 +0000 (14:33 -0700)]
kmod: make request_module() return an error when autoloading is disabled
Patch series "module autoloading fixes and cleanups", v5.
This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.
It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/
20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().
This patch (of 4):
It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.
This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.
However, when module autoloading is disabled in this way,
request_module() returns 0. This is broken because callers expect 0 to
mean that the module was successfully loaded.
Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.
But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:
if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}
This is easily reproduced with:
echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /
It causes:
request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]
This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails. So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.
I've also sent patches to document and test this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:39 +0000 (14:33 -0700)]
mm/memremap: set caching mode for PCI P2PDMA memory to WC
PCI BAR IO memory should never be mapped as WB, however prior to this
the PAT bits were set WB and it was typically overridden by MTRR
registers set by the firmware.
Set PCI P2PDMA memory to be UC as this is what it currently, typically,
ends up being mapped as on x86 after the MTRR registers override the
cache setting.
Future use-cases may need to generalize this by adding flags to select
the caching type, as some P2PDMA cases may not want UC. However, those
use-cases are not upstream yet and this can be changed when they arrive.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-8-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:36 +0000 (14:33 -0700)]
mm/memory_hotplug: add pgprot_t to mhp_params
devm_memremap_pages() is currently used by the PCI P2PDMA code to create
struct page mappings for IO memory. At present, these mappings are
created with PAGE_KERNEL which implies setting the PAT bits to be WB.
However, on x86, an mtrr register will typically override this and force
the cache type to be UC-. In the case firmware doesn't set this
register it is effectively WB and will typically result in a machine
check exception when it's accessed.
Other arches are not currently likely to function correctly seeing they
don't have any MTRR registers to fall back on.
To solve this, provide a way to specify the pgprot value explicitly to
arch_add_memory().
Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a
simple change to pass the pgprot_t down to their respective functions
which set up the page tables. For x86_32, set the page tables
explicitly using _set_memory_prot() (seeing they are already mapped).
For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this
should be fine, for now, seeing these architectures don't support
ZONE_DEVICE.
A check in __add_pages() is also added to ensure the pgprot parameter
was set for all arches.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:32 +0000 (14:33 -0700)]
powerpc/mm: thread pgprot_t through create_section_mapping()
In prepartion to support a pgprot_t argument for arch_add_memory().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-6-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>