OSDN Git Service
gingold [Thu, 20 Nov 2008 09:28:06 +0000 (09:28 +0000)]
2008-11-20 Tristan Gingold <gingold@adacore.com>
* bfd.c (is32bit): Use architecture information for non-ELF
targets.
amodra [Thu, 20 Nov 2008 08:47:10 +0000 (08:47 +0000)]
* elf32-ppc.c (allocate_dynrelocs): Always use tlsld_got for
TLS_LD even when symbol is used with other TLS reloc types.
(ppc_elf_relocate_section): Bypass symbol checks when using tlsld_got.
Leave addend zero on LD DTPMOD dynamic reloc.
hp [Thu, 20 Nov 2008 02:48:28 +0000 (02:48 +0000)]
Forgot to save entry before commit:
* config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
on symbols in TLS relocs.
devans [Thu, 20 Nov 2008 00:35:22 +0000 (00:35 +0000)]
* inferior.h (proceed_to_finish): Delete, unused.
(stop_registers): Tweak comment.
* infrun.c (stop_registers): Tweak comment.
amodra [Thu, 20 Nov 2008 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Thu, 20 Nov 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
kevinb [Wed, 19 Nov 2008 21:17:06 +0000 (21:17 +0000)]
* frv-tdep.c (frv_skip_main_prologue): New function.
(frv_gdbarch_init): Register frv_skip_main_prologue.
* solib-frv.c (fetch_loadmap): Return early when no segments are
found.
(frv_relocate_main_executable): Return early when both interpreter
and executable loadmap addresses are zero.
jjohnstn [Wed, 19 Nov 2008 21:05:31 +0000 (21:05 +0000)]
2008-11-19 Joel Sherrill <joel.sherrill@oarcorp.com>
* libc/include/sys/config.h[__mips__]: Don't bother
setting __ATTRIBUTE_IMPURE_PTR__ here.
[__rtems__][__mips__]: No need to undef the __ATTRIBUTE_IMPURE_PTR__
macro anymore.
jjohnstn [Wed, 19 Nov 2008 20:56:22 +0000 (20:56 +0000)]
2008-11-19 Jeff Johnston <jjohnstn@redhat.com>
* libc/sys/linux/bits/dirent.h: New header file.
* libc/sys/linux/sys/dirent.h: Include <bits/dirent.h> instead of
<linux/dirent.h>.
* libc/posix/Makefile.am: Remove reallocf.
* libc/posix/Makefile.in: Regenerated.
* libc/posix/reallocf.c: Moved to...
* libc/stdlib/reallocf.c: Here
* libc/stdlib/malloc.c: Add reallocf documentation.
* libc/include/stdlib.h: Add reallocf and _reallocf_r prototypes.
* libc/stdlib/Makefile.am: Add reallocf.
* libc/stdlib/Makefile.in: Regenerated.
* libc/posix/_isatty.c: Set errno.
jjohnstn [Wed, 19 Nov 2008 20:55:51 +0000 (20:55 +0000)]
2008-11-19 Jeff Johnston <jjohnstn@redhat.com>
* libc/sys/linux/bits/dirent.h: New header file.
* libc/sys/linux/sys/dirent.h: Include <bits/dirent.h> instead of
<linux/dirent.h>.
* libc/posix/Makefile.am: Remove reallocf.
* libc/posix/Makefile.in: Regenerated.
* libc/posix/reallocf.c: Moved to...
* libc/stdlib/reallocf.c: Here
* libc/stdlib/malloc.c: Add reallocf documentation.
* libc/include/stdlib.h: Add reallocf and _reallocf_r prototypes.
* libc/stdlib/Makefile.am: Add reallocf.
* libc/stdlib/Makefile.in: Regenerated.
* libc/posix/_isatty.c: Set errno.
jjohnstn [Wed, 19 Nov 2008 20:04:09 +0000 (20:04 +0000)]
2008-11-19 Craig Howland <howland@LGSInnovations.com>
* libc/unix/collate.c (__collate_err): simplify to remove unnecessary
strdup() and strlen() calls, also getting rid of a compiler warning.
jjohnstn [Wed, 19 Nov 2008 19:48:29 +0000 (19:48 +0000)]
2008-11-19 Ralf Corsepius <ralf.corsepius@rtems.org>
* libc/include/sys/config.h: Don't put
__ATTRIBUTE_IMPURE_PTR__ into .sdata section for mips-rtems.
bwilson [Wed, 19 Nov 2008 18:29:44 +0000 (18:29 +0000)]
gdb/
* xtensa-config.c (rmap): Remove entries for ar32 through ar63. Add
threadptr, scompare1, mmid, epc5, epc6, epc7, eps5, eps6, eps7,
excsave5, excsave6, excsave7, cpenable, and vecbase registers.
(xtensa_submask0, xtensa_submask1, xtensa_submask2)
(xtensa_submask3, xtensa_submask4, xtensa_submask5, xtensa_submask6)
(xtensa_submask7, xtensa_submask8, xtensa_submask9, xtensa_submask10)
(xtensa_submask11, xtensa_submask12, xtensa_submask13, xtensa_submask14)
(xtensa_submask15): Adjust register numbers.
* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
(xtensa_regmap_table): Add entry for scompare1.
* regformats/reg-xtensa.dat: Remove ar32 through ar63. Add threadptr
and scompare1.
gdb/gdbserver/
* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
(xtensa_regmap_table): Add entry for scompare1.
bwilson [Wed, 19 Nov 2008 18:25:19 +0000 (18:25 +0000)]
include/
* xtensa-config.h (XCHAL_HAVE_MUL16, XCHAL_HAVE_MUL32, XCHAL_HAVE_DIV32)
(XCHAL_HAVE_MINMAX, XCHAL_HAVE_SEXT, XCHAL_HAVE_THREADPTR)
(XCHAL_HAVE_RELEASE_SYNC, XCHAL_HAVE_S32C1I): Change to 1.
(XCHAL_NUM_AREGS): Change to 32.
(XCHAL_ICACHE_SIZE, XCHAL_DCACHE_SIZE): Change to 16K.
(XCHAL_ICACHE_LINESIZE, XCHAL_DCACHE_LINESIZE): Change to 32.
(XCHAL_ICACHE_LINEWIDTH, XCHAL_DCACHE_LINEWIDTH): Change to 5.
(XCHAL_DCACHE_IS_WRITEBACK): Change to 1.
(XCHAL_DEBUGLEVEL): Change to 6.
bfd/
* xtensa-modules.c (sysregs): Add MMID, VECBASE, EPC5, EPC6, EPC7,
EXCSAVE5, EXCSAVE6, EXCSAVE7, EPS5, EPS6, EPS7, CPENABLE,
SCOMPARE1, and THREADPTR registers.
(NUM_SYSREGS, MAX_USER_REG): Update.
(states): Change width of INTERRUPT, WindowBase, WindowStart, and
INTENABLE. Add VECBASE, EPC5, EPC6, EPC7, EXCSAVE5, EXCSAVE6,
EXCSAVE7, EPS6, EPS6, EPS7, THREADPTR, CPENABLE, and SCOMPARE1 states.
(NUM_STATES): Update.
(enum xtensa_state_id): Add entries for new states.
(enum xtensa_field_id): Add entries for xt_wbr15_imm and xt_wbr18_imm
fields, along with functions to extract and set them.
(regfiles): Change number of AR registers to 32.
(Operand_ar0_encode, Operand_ar4_encode, Operand_ar8_encode,
Operand_ar12_encode, Operand_ars_entry_encode): Update register mask.
(operands): Add entries for tp7, xt_wbr15_label, xt_wbr18_label,
xt_wbr15_imm, and xt_wbr18_imm operands, along with functions to
encode and decode them.
(enum xtensa_operand_id): Add entries for new operands.
(Iclass_xt_iclass_rfi_stateArgs): Add EPC5, EPC6, EPC7, EPS5, EPS6, and
EPC7 states.
(Iclass_xt_iclass_rfdo_stateArgs): Replace EPC4 and EPS4 by EPC6 and
EPS6, respectively.
(iclasses): Add entries for rur_threadptr, wur_threadptr,
xt_iclass_wsr_176, xt_iclass_rsr_epc5, xt_iclass_wsr_epc5,
xt_iclass_xsr_epc5, xt_iclass_rsr_excsave5, xt_iclass_wsr_excsave5,
xt_iclass_xsr_excsave5, xt_iclass_rsr_epc6, xt_iclass_wsr_epc6,
xt_iclass_xsr_epc6, xt_iclass_rsr_excsave6, xt_iclass_wsr_excsave6,
xt_iclass_xsr_excsave6, xt_iclass_rsr_epc7, xt_iclass_wsr_epc7,
xt_iclass_xsr_epc7, xt_iclass_rsr_excsave7, xt_iclass_wsr_excsave7,
xt_iclass_xsr_excsave7, xt_iclass_rsr_eps5, xt_iclass_wsr_eps5,
xt_iclass_xsr_eps5, xt_iclass_rsr_eps6, xt_iclass_wsr_eps6,
xt_iclass_xsr_eps6, xt_iclass_rsr_eps7, xt_iclass_wsr_eps7,
xt_iclass_xsr_eps7, xt_iclass_rsr_vecbase, xt_iclass_wsr_vecbase,
xt_iclass_xsr_vecbase, xt_iclass_mul16, xt_iclass_wsr_mmid,
xt_iclass_icache_lock, xt_iclass_dcache_lock, xt_iclass_rsr_cpenable,
xt_iclass_wsr_cpenable, xt_iclass_xsr_cpenable, xt_iclass_clamp,
xt_iclass_minmax, xt_iclass_sx, xt_iclass_l32ai, xt_iclass_s32ri,
xt_iclass_s32c1i, xt_iclass_rsr_scompare1, xt_iclass_wsr_scompare1,
xt_iclass_xsr_scompare1, xt_iclass_div, and xt_iclass_mul32, along
with corresponding argument and state argument arrays. Change
number of state arguments for xt_iclass_rfi. Add arguments for
xt_iclass_rfdo.
(enum xtensa_iclass_id): Add entries for new iclasses.
(opcodes): Add entries for RUR_THREADPTR, WUR_THREADPTR, WSR_176,
RSR_EPC5, WSR_EPC5, XSR_EPC5, RSR_EXCSAVE5, WSR_EXCSAVE5, XSR_EXCSAVE5,
RSR_EPC6, WSR_EPC6, XSR_EPC6, RSR_EXCSAVE6, WSR_EXCSAVE6, XSR_EXCSAVE6,
RSR_EPC7, WSR_EPC7, XSR_EPC7, RSR_EXCSAVE7, WSR_EXCSAVE7, XSR_EXCSAVE7,
RSR_EPS5, WSR_EPS5, XSR_EPS5, RSR_EPS6, WSR_EPS6, XSR_EPS6, RSR_EPS7,
WSR_EPS7, XSR_EPS7, RSR_VECBASE, WSR_VECBASE, XSR_VECBASE, MUL16U,
MUL16S, WSR_MMID, IPFL, IHU, IIU, DPFL, DHU, DIU, RSR_CPENABLE,
WSR_CPENABLE, XSR_CPENABLE, CLAMPS, MIN, MAX, MINU, MAXU, SEXT, L32AI,
S32RI, S32C1I, RSR_SCOMPARE1, WSR_SCOMPARE1, XSR_SCOMPARE1, QUOU, QUOS,
REMU, REMS, and MULL opcodes, along with the corresponding functions
to encode them.
(enum xtensa_opcode_id): Add entries for new opcodes.
(Slot_inst_decode): Handle new opcodes.
(Slot_inst_get_field_fns, Slot_inst_set_field_fns): Add entries for
xt_wbr15_imm and xt_wbr18_imm fields.
(Slot_inst16a_get_field_fns, Slot_inst16a_set_field_fns): Likewise.
(Slot_inst16b_get_field_fns, Slot_inst16b_set_field_fns): Likewise.
(xtensa_modules): Update number of fields, operands, iclasses and
opcodes.
jjohnstn [Wed, 19 Nov 2008 17:13:12 +0000 (17:13 +0000)]
2008-11-19 Ralf Corsepius <ralf.corsepius@rtems.org>
* libc/posix/runetype.h: Add include of stddef.h and remove
defining standard types: size_t and wchar_t.
jjohnstn [Wed, 19 Nov 2008 17:02:32 +0000 (17:02 +0000)]
2008-11-19 Ralf Corsepius <ralf.corsepius@rtems.org>
* libc/include/pthread.h: Remove prototypes for
pthread_attr_getcputime and pthread_attr_setcputime which
were proposed but never approved by the POSIX standard.
nickc [Wed, 19 Nov 2008 16:22:46 +0000 (16:22 +0000)]
Change documentation license to FDL v1.3
palves [Wed, 19 Nov 2008 14:45:07 +0000 (14:45 +0000)]
* remote.c (escape_buffer): New.
(putpkt_binary, read_frame, getpkt_or_notif_sane_1): Use it. Make
sure debug output printing a packet buffer goes through a single
fprintf_unfiltered call.
* utils.c (vfprintf_unfiltered): If outputting timestamps, end
output with a newline if it wasn't going to already.
nickc [Wed, 19 Nov 2008 10:09:20 +0000 (10:09 +0000)]
* elf.c (swap_out_syms) [USE_STT_COMMON]: Fix syntax error.
nickc [Wed, 19 Nov 2008 09:25:56 +0000 (09:25 +0000)]
PR 7027
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Treat WPLT30 relocs
against local symbols in 64-bit binaries as if they were WDISP30
relocs.
(_bfd_sparc_elf_relocate_section): Likewise.
hp [Wed, 19 Nov 2008 06:16:54 +0000 (06:16 +0000)]
* gas/cris/rd-tls-1.d, gas/cris/rd-tls-1.s: Use a local thread
variable instead of .text location for :GD decoration test.
hp [Wed, 19 Nov 2008 06:16:04 +0000 (06:16 +0000)]
* config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
on symbols in TLS relocs.
amodra [Wed, 19 Nov 2008 00:00:09 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 19 Nov 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
jjohnstn [Tue, 18 Nov 2008 22:55:06 +0000 (22:55 +0000)]
2008-11-18 Joel Sherrill <joel.sherrill@oarcorp.com>
* libc/unix/ttyname.c: Use isatty() instead of tcgetattr().
ppluzhnikov [Tue, 18 Nov 2008 22:46:27 +0000 (22:46 +0000)]
2008-11-18 Paul Pluzhnikov <ppluzhnikov@google.com>
* maint.c (maintenance_translate_address): Fix a buglet.
ppluzhnikov [Tue, 18 Nov 2008 22:46:04 +0000 (22:46 +0000)]
2008-11-18 Paul Pluzhnikov <ppluzhnikov@google.com>
* maint.c (maintenance_translate_address): Fix a buglet.
jjohnstn [Tue, 18 Nov 2008 22:40:40 +0000 (22:40 +0000)]
2008-11-18 Jeff Johnston <jjohnstn@redhat.com>
* libc/unix/basename.c: Add !_NO_BASENAME flag check so code can be
ignored if desired by a platform.
* libc/unix/dirname.c: Ditto except replace BASENAME with file name.
* libc/unix/getcwd.c: Ditto.
* libc/unix/getlogin.c: Ditto.
* libc/unix/getpass.c: Ditto.
* libc/unix/getpwent.c: Ditto.
* libc/unix/getut.c: Ditto.
* libc/unix/pread.c: Ditto.
* libc/unix/pwrite.c: Ditto.
* libc/unix/sigset.c: Ditto.
bauermann [Tue, 18 Nov 2008 21:48:47 +0000 (21:48 +0000)]
gdb/
* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
rs6000/powerpc-isa205-altivec32l-expedite,
powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
rs6000/powerpc-isa205-altivec64l-expedite,
powerpc-isa205-vsx64l-expedite): New variables.
* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.
gdbserver/
* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
powerpc-isa205-64l.o, powerpc-isa205-64l.c,
powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
XML target descriptions.
* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
when inferior is running on an ISA 2.05 or later processor. Add
special case to return offset for full 64-bit slot of FPSCR when
in 32-bits.
jjohnstn [Tue, 18 Nov 2008 21:47:44 +0000 (21:47 +0000)]
2008-11-18 Jeff Johnston <jjohnstn@redhat.com>
* libc/unix/basename.c: Add !_NO_BASENAME flag check so code can be
ignored if desired by a platform.
* libc/unix/dirname.c: Ditto except replace BASENAME with file name.
* libc/unix/getcwd.c: Ditto.
* libc/unix/getlogin.c: Ditto.
* libc/unix/getpass.c: Ditto.
* libc/unix/getpwent.c: Ditto.
* libc/unix/getut.c: Ditto.
* libc/unix/pread.c: Ditto.
* libc/unix/pwrite.c: Ditto.
* libc/unix/sigset.c: Ditto.
bauermann [Tue, 18 Nov 2008 21:39:47 +0000 (21:39 +0000)]
gdb/
* ppc-linux-nat.c (ppc_register_u_addr): Add special case to return
offset for full 64-bit slot of FPSCR when in 32-bits.
(ppc_linux_read_description): Return target description with 64-bit
FPSCR when inferior is running on an ISA 2.05 or later processor.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Call
initialize_tdec_powerpc_isa205_32l,
initialize_tdec_powerpc_isa205_altivec32l,
initialize_tdec_powerpc_isa205_vsx32l,
initialize_tdec_powerpc_isa205_64l,
initialize_tdec_powerpc_isa205_altivec64l and
initialize_tdec_powerpc_isa205_vsx64l.
* ppc-linux-tdep.h: Add external declaration for
tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l,
tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_64l,
tdesc_powerpc_isa205_altivec64l and tdesc_powerpc_isa205_vsx64l.
* features/rs600/powerpc-fpu-isa205.xml: New file.
* features/rs600/powerpc-isa205-32l.xml: New file.
* features/rs600/powerpc-isa205-64l.xml: New file.
* features/rs600/powerpc-isa205-altivec32l.xml: New file.
* features/rs600/powerpc-isa205-altivec64l.xml: New file.
* features/rs600/powerpc-isa205-vsx32l.xml: New file.
* features/rs600/powerpc-isa205-vsx64l.xml: New file.
* features/rs600/powerpc-isa205-32l.c: Generate.
* features/rs600/powerpc-isa205-64l.c: Generate.
* features/rs600/powerpc-isa205-altivec32l.c: Generate.
* features/rs600/powerpc-isa205-altivec64l.c: Generate.
* features/rs600/powerpc-isa205-vsx32l.c: Generate.
* features/rs600/powerpc-isa205-vsx64l.c: Generate.
gdb/testsuite/
* gdb.arch/ppc-dfp.exp: New file.
* gdb.arch/ppc-dfp.c: New file.
jjohnstn [Tue, 18 Nov 2008 21:39:10 +0000 (21:39 +0000)]
2008-11-18 Craig Howland <howland@LGSInnovations.com>
* libc/unix/ttyname.c: Add ttyname_r and change ttyname to use
ttyname_r.
ppluzhnikov [Tue, 18 Nov 2008 21:31:26 +0000 (21:31 +0000)]
2008-11-18 Paul Pluzhnikov <ppluzhnikov@google.com>
* objfiles.h: New MULTI_OBJFILE_P macro.
* printcmd.c (sym_info): Print object name.
* maint.c (maintenance_translate_address): Likewise.
joel [Tue, 18 Nov 2008 21:30:36 +0000 (21:30 +0000)]
2008-11-18 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure: Regenerated.
* configure.ac: Add test for System V shared memory and semaphore.
* debug.c, debug.h: Add trace support for new devices.
* hw_sem.c, hw_shm.c: New files.
* Makefile.in: Add hw_sem.c and hw_shm.c.
brobecke [Tue, 18 Nov 2008 20:43:12 +0000 (20:43 +0000)]
* gdb.texinfo (Set Catchpoints): Remove the documentation of
commands "catch load" and "catch unload".
brobecke [Tue, 18 Nov 2008 20:41:42 +0000 (20:41 +0000)]
* NEWS: Document the removal of "catch load" and "catch unload".
clm [Tue, 18 Nov 2008 15:45:01 +0000 (15:45 +0000)]
Add support for ARM half-precision conversion instructions.
nickc [Tue, 18 Nov 2008 14:04:54 +0000 (14:04 +0000)]
* dwarf2.c (read_section): Fix formatting.
(read_n_bytes): Remove unhelpful comment.
(read_indirect_string): Pass symbol table to read_section in case
the .debug_str section needs relocating.
PR 7037
* elf32-cr16.c (cr16_elf_howto_table): Zero the src_mask field of
the reloc descriptions.
devans [Tue, 18 Nov 2008 00:13:01 +0000 (00:13 +0000)]
* infcall.c (call_function_by_hand): Fix punctuation and capitalization
on error messages.
* gdb.mi/mi-syn-frame.exp: Update expected output.
* gdb.mi/mi2-syn-frame.exp: Update expected output.
gdbadmin [Tue, 18 Nov 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Tue, 18 Nov 2008 00:00:08 +0000 (00:00 +0000)]
daily update
jjohnstn [Mon, 17 Nov 2008 22:08:05 +0000 (22:08 +0000)]
2008-11-17 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.host: RTEMS now uses posix subdirectory.
jjohnstn [Mon, 17 Nov 2008 22:05:11 +0000 (22:05 +0000)]
2008-11-17 Joel Sherrill <joel.sherrill@oarcorp.com>
* sys/rtems/include/limits.h: Add _POSIX2_RE_DUP_MAX.
* sys/rtems/sys/param.h: sys/rtprio.h not needed.
jjohnstn [Mon, 17 Nov 2008 21:58:28 +0000 (21:58 +0000)]
2008-11-17 Jeff Johnston <jjohnstn@redhat.com>
* m32r/Makefile.in: Add building m32r-stub.o from local copy instead
of up and over in gdb.
* m32r/m32r-stub.c: New file copied from gdb.
uweigand [Mon, 17 Nov 2008 20:11:48 +0000 (20:11 +0000)]
* configure.tgt [spu-*-elf*]: Set NATIVE_LIB_DIRS to '/lib'.
uweigand [Mon, 17 Nov 2008 18:50:21 +0000 (18:50 +0000)]
PR gdb/2250
* infrun.c (clear_proceed_status_thread): New function.
(clear_proceed_status_callback): New function.
(clear_proceed_status): In all-stop mode, clear per-thread
proceed status of *all* threads, not only the current.
(handle_inferior_event): In all-stop mode, if we're stepping
one thread, but got some inferior event in another thread
that does not cause GDB to break to the user interface,
ensure the interrupted stepping operation continues in the
original thread.
(currently_stepping): Move thread-related tests to ...
(currently_stepping_thread): ... this new function.
(currently_stepping_callback): New function.
nickc [Mon, 17 Nov 2008 17:44:31 +0000 (17:44 +0000)]
Update copyright year in --version messages.
vprus [Mon, 17 Nov 2008 16:43:32 +0000 (16:43 +0000)]
Implement =thread-selected notification.
* mi/mi-common.h (struct mi_interp): New, moved from ...
* mi/mi-interp.c: ...here.
* mi/mi-main.c (mi_execute_command): If the thread changed
as result of command, report that.
vprus [Mon, 17 Nov 2008 16:39:50 +0000 (16:39 +0000)]
Implement continue/interrupt of thread groups.
* mi/mi-main.c (proceed_thread_callback): New.
(mi_cmd_exec_continue): If --thread-group is specified, resume all
threads in that group.
(interrupt_thread_callback): New.
(mi_cmd_exec_interrupt): If --thread-group is specified, interrupt
all threads in that group.
vprus [Mon, 17 Nov 2008 16:37:32 +0000 (16:37 +0000)]
Implement '-target-detach pid'.
* infcmd.c (detach_command): Make nonstatic.
* inferior.h (detach_command): Declare.
* mi/mi-cmds.c (mi_cmds): Don't route -target-detach via CLI.
* mi/mi-cmds.h (mi_cmd_target_detach): Declare.
* mi/mi-main.c (find_thread_of_process, mi_cmd_target_detach): New.
vprus [Mon, 17 Nov 2008 12:34:18 +0000 (12:34 +0000)]
Include group-id in thread-created notification.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit): Include
group id in the output.
vprus [Mon, 17 Nov 2008 12:28:05 +0000 (12:28 +0000)]
Notification for attach/detach.
* inferior.c: Call the process observers.
* mi/mi-interp.c (mi_new_inferior, mi_inferior_exit): New.
(mi_interpreter_init): Register the above.
vprus [Mon, 17 Nov 2008 12:13:49 +0000 (12:13 +0000)]
Implement -list-thread-groups.
* thread.c (print_thread_info): New parameter pid, to print
threads of specific process.
* gdbthread.h (print_thread_info): New parameter pid.
* mi/mi-cmds.c (mi_cmds): Register -list-thread-groups.
* mi/mi-cmds.h (mi_cmd_list_thread_groups): New.
* mi/mi-main.c (mi_cmd_thread_info): Adjust.
(print_one_process, mi_cmd_list_thread_groups): New.
gdbadmin [Mon, 17 Nov 2008 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Mon, 17 Nov 2008 00:00:05 +0000 (00:00 +0000)]
daily update
brobecke [Sun, 16 Nov 2008 18:05:26 +0000 (18:05 +0000)]
Remove some unused macros related to the old load/unload catchpoints.
* breakpoint.c (SOLIB_LOADED_LIBRARY_PATHNAME)
(SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_CREATE_CATCH_LOAD_HOOK)
(SOLIB_CREATE_CATCH_UNLOAD_HOOK): Delete. No longer used.
brobecke [Sun, 16 Nov 2008 18:03:25 +0000 (18:03 +0000)]
* gdb.base/help.exp: Remove the "catch load" and "catch unload"
commands from the expected output for "help catch".
brobecke [Sun, 16 Nov 2008 18:01:46 +0000 (18:01 +0000)]
Remove support for catch load and catch unload commands.
* breakpoint.h (enum bptype): Remove bp_catch_load and bp_catch_unload.
(struct breakpoint): Remove fields dll_pathname and
triggered_dll_pathname.
(bpstat_get_triggered_catchpoints, ep_is_shlib_catchpoint): Delete.
* breakpoint.c (ep_is_catchpoint): Remove handling of
bp_catch_load and bp_catch_unload.
(print_it_typical, bpstat_check_location, bpstat_what)
(print_one_breakpoint_location, print_one_breakpoint_location)
(user_settable_breakpoint, allocate_bp_location)
(set_raw_breakpoint_without_location, mention, delete_breakpoint,
(breakpoint_re_set_one, disable_command, enable_command): Likewise.
(ep_is_shlib_catchpoint, bpstat_get_triggered_catchpoints)
(catch_load_command_1, catch_unload_command_1): Delete.
(_initialize_breakpoint): Remove the "catch load" and "catch unload"
command creation.
* infrun.c (handle_inferior_event): Remove the handling of
load/unload catchpoint events.
dannysmith [Sun, 16 Nov 2008 06:00:41 +0000 (06:00 +0000)]
* dlltool.c (identify_search_section): Cast argument, not return
value, of xstrdup to 'char*'.
amodra [Sun, 16 Nov 2008 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sun, 16 Nov 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
brobecke [Sat, 15 Nov 2008 18:49:50 +0000 (18:49 +0000)]
From Jerome Guitton <guitton@adacore.com>
* dwarf2read.c (dwarf2_debug_line_missing_end_sequence_complaint):
New function.
(dwarf_decode_lines): Detect null file numbers. Detect the end of
the line program sequence when no end sequence is emitted.
brobecke [Sat, 15 Nov 2008 18:30:38 +0000 (18:30 +0000)]
* gdb.ada/int_deref.exp: New testcase.
brobecke [Sat, 15 Nov 2008 18:27:27 +0000 (18:27 +0000)]
* ada-lang.c (ada_evaluate_subexp): Improve handling of integer
type dereferencing.
cwilson [Sat, 15 Nov 2008 18:15:18 +0000 (18:15 +0000)]
Added --identify option to dlltool.
drow [Sat, 15 Nov 2008 16:09:50 +0000 (16:09 +0000)]
* NEWS: Mention sparc64-linux-gnu gdbserver support.
ccoutant [Sat, 15 Nov 2008 01:40:23 +0000 (01:40 +0000)]
* reloc.cc (Sized_relobj::do_read_relocs): Use constant invalid_address
instead of -1U.
amodra [Sat, 15 Nov 2008 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sat, 15 Nov 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
drow [Fri, 14 Nov 2008 22:06:41 +0000 (22:06 +0000)]
2008-11-14 Daniel Gutson <dgutson@codesourcery.com>
* configure.tgt (sparc64-*-linux*): Added gdbserver support.
* regformats/reg-sparc64.dat: New file.
gdbserver/
2008-11-14 Daniel Gutson <dgutson@codesourcery.com>
* Makefile.in (SFILES, clean): Added sparc64 files.
(reg-sparc64.o, reg-sparc64.c): New.
* configure.srv (sparc*-*-linux*): New configuration.
* linux-low.c (regsets_fetch_inferior_registers): Swap ptrace
syscall arguments for SPARC.
(regsets_store_inferior_registers): Likewise.
* linux-sparc-low.c: New file.
eweddington [Fri, 14 Nov 2008 21:37:52 +0000 (21:37 +0000)]
/bfd:
2008-11-14 Eric B. Weddington <eric.weddington@atmel.com>
PR 7022
* elf32-avr.c (bfd_elf_avr_final_write_processing):
Add missing break statements.
tromey [Fri, 14 Nov 2008 18:38:31 +0000 (18:38 +0000)]
gdb
PR mi/2549:
* mi/mi-main.c (get_register): Use get_formatted_print_options.
gdb/testsuite
2008-11-14 Nick Roberts <nickrob@snap.net.nz>
* gdb.mi/gdb2549.exp: New file.
bwilson [Fri, 14 Nov 2008 17:37:28 +0000 (17:37 +0000)]
* xtensa-modules.c (xtensa_state_id): New enum, replacing STATE macros.
(xtensa_field_id, xtensa_regfile_id, xtensa_operand_id)
(xtensa_iclass_id, xtensa_opcode_id): New enums.
Replace hardcoded constants throughout this file with enum values.
dj [Fri, 14 Nov 2008 16:02:56 +0000 (16:02 +0000)]
merge from gcc
ktietz [Fri, 14 Nov 2008 15:13:05 +0000 (15:13 +0000)]
2008-11-14 Kai Tietz <kai.tietz@onevision.com>
* emultempl/pep.em (..._before_parse): initialize
pei386_runtime_pseudo_reloc by version 2.
(OPTION_DLL_ENABLE_RUNTIME_PSEUDO_RELOC_V1): New option.
(OPTION_DLL_ENABLE_RUNTIME_PSEUDO_RELOC_V2): New option.
(make_import_fixup): Use relocation size to read addend.
* emultempl/pe.em (..._before_parse): initialize
pei386_runtime_pseudo_reloc by version 1.
(OPTION_DLL_ENABLE_RUNTIME_PSEUDO_RELOC_V1): New option.
(OPTION_DLL_ENABLE_RUNTIME_PSEUDO_RELOC_V2): New option.
* pe-dll.c (pe-dll.h): Remove useless include.
(make_runtime_pseudo_reloc): Change addend to use bfd_vma.
Handle the two variants of pseudo-relocation.
(pe_create_import_fixup): Change addend to type bfd_vma.
Modify for the two pseudo_relocation variants.
(runtime_pseudp_reloc_v2_init): New static variable.
* pe-dll.h (pe_create_import_fixup): Change addend argument type
to bfd_vma.
* pep-dll.h (pep_create_import_fixup): Likewise.
* NEWS: Add comment.
drow [Fri, 14 Nov 2008 15:10:49 +0000 (15:10 +0000)]
Revert:
2008-10-24 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.tpl (HOST_EXPORTS): Correct CPPFLAGS typo.
* Makefile.in: Regenerated.
2008-10-22 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.def (flags_to_pass): Add CPPFLAGS_FOR_BUILD and CPPFLAGS.
* Makefile.tpl (BUILD_EXPORTS): Set CPPFLAGS.
(EXTRA_BUILD_FLAGS): Correct typo. Pass CPPFLAGS.
(HOST_EXPORTS): Pass CPPFLAGS.
(CPPFLAGS_FOR_BUILD, CPPFLAGS, CPPFLAGS_FOR_TARGET): Define.
(LDFLAGS_FOR_TARGET): Initialize from configure script.
(EXTRA_TARGET_FLAGS): Set CPPFLAGS.
* Makefile.in, configure: Regenerated.
* configure.ac: Set CPPFLAGS_FOR_TARGET, LDFLAGS_FOR_TARGET,
and CPPFLAGS_FOR_BUILD.
gingold [Fri, 14 Nov 2008 14:56:51 +0000 (14:56 +0000)]
2008-11-14 Tristan Gingold <gingold@adacore.com>
Remove outdated mach-o specific tests.
* objdump.c (load_debug_section): Remove mach-o specific test.
(mach_o_uncompressed_dwarf_sections): Removed.
(mach_o_compressed_dwarf_sections): Removed.
(generic_uncompressed_dwarf_sections): Removed.
(generic_compressed_dwarf_sections): Removed.
(check_mach_o_dwarf): Removed.
(dump_dwarf): Remove call to check_mach_o_dwarf.
nickc [Fri, 14 Nov 2008 14:44:08 +0000 (14:44 +0000)]
bfd/
* elf.c (assign_file_positions_for_load_sections): Use header_size
to avoid moving the load address of file headers.
(assign_file_positions_for_load_sections): Set header_size for
segments containing the file header.
include/elf/
* internal.h (struct elf_segment_map): Add header_size field.
nickc [Fri, 14 Nov 2008 13:03:25 +0000 (13:03 +0000)]
* read.c (emit_expr): Grow frag before filling it so that
dot_value remains valid.
gingold [Fri, 14 Nov 2008 09:57:33 +0000 (09:57 +0000)]
bfd/
2008-11-14 Tristan Gingold <gingold@adacore.com>
* configure.com: Handle bfd_default_target_size, BFD_HOST_LONG_LONG,
BFD_HOST_64BIT_LONG_LONG, BFD_HOSTPTR_T, bfd_file_ptr.
Generate bfdver.h.
* vms-hdr.c (_bfd_vms_write_hdr): Use strdup/free instead of alloca.
* hosts/alphavms.h: Defines macros to bypass i18n.
* makefile.vms (OBJS): Update file list.
(DEFS): Remove VMS_DEBUG, const, add DEBUGDIR.
(CFLAGS): Update flags.
* bfdio.c (real_fopen): Add code specific to VMS: extract attributes
from modes.
binutils/
2008-11-14 Tristan Gingold <gingold@adacore.com>
* configure.com: Get version from configure.in of bfd.
* makefile.vms-in (DEBUG_OBJS): Add dwarf.obj.
(CFLAGS): Update flags.
include/
2008-11-14 Tristan Gingold <gingold@adacore.com>
* fopen-vms.h (FOPEN_RB): Use a single string to match the
standard prototype.
(FOPEN_WB): Ditto.
(FOPEN_AB): Ditto.
(FOPEN_RUB): Ditto.
(FOPEN_WUB): Ditto.
(FOPEN_AUB): Ditto.
libiberty/
2008-11-14 Tristan Gingold <gingold@adacore.com>
* makefile.vms (OBJS): Update objects list.
(CFLAGS): Update.
(libiberty.olb): Remove alloca-conf.h dependency.
* config.h-vms: Use new macro sets, use builtin alloca.
opcodes/
2008-11-14 Tristan Gingold <gingold@adacore.com>
* makefile.vms (OBJS): Update list of objects.
(DEFS): Update
(CFLAGS): Update.
nickc [Fri, 14 Nov 2008 09:02:37 +0000 (09:02 +0000)]
PR 7026
* config/tc-arm.c: Ensure that all uses of as_bad have a
formatting string.
devans [Fri, 14 Nov 2008 06:55:40 +0000 (06:55 +0000)]
(set_lang_c): Delete.
(runto_main): If it fails, call fail instead of gdb_suppress_tests.
amodra [Fri, 14 Nov 2008 06:54:39 +0000 (06:54 +0000)]
* Makefile.am (spu_ovl.o_c): Add missing line continuations.
* Makefile.in: Regenerate.
amodra [Fri, 14 Nov 2008 00:00:09 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 14 Nov 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
brobecke [Thu, 13 Nov 2008 23:09:47 +0000 (23:09 +0000)]
* configure.in: Deactivate large-file support on native 32bit
sparc-solaris unless the user explicitly requested it.
* configure: Regenerate.
brobecke [Thu, 13 Nov 2008 22:26:15 +0000 (22:26 +0000)]
* printcmd.c: define PRINTF_HAS_LONG_LONG only if not yet defined.
fche [Thu, 13 Nov 2008 18:06:41 +0000 (18:06 +0000)]
2008-11-13 Frank Ch. Eigler <fche@elastic.org>
From Alon Bar-Lev <alon.barlev@gmail.com>:
* configure.am (EXTRA_INCLUDES): New macro.
* Makefile.am: Use it to supplement CPPFLAGS.
* aclocal.m4, configure.in, Makefile.in: Regenerated.
uweigand [Thu, 13 Nov 2008 15:07:53 +0000 (15:07 +0000)]
gdb/ChangeLog:
* auxv.c (fprint_target_auxv): Handle AT_BASE_PLATFORM and
AT_EXECFN. Re-sort AT_SECURE.
include/elf/ChangeLog:
* common.h (AT_BASE_PLATFORM, AT_EXECFN): Define.
jkratoch [Thu, 13 Nov 2008 15:02:12 +0000 (15:02 +0000)]
* monitor.c (monitor_insert_breakpoint): Remove unused variable `bp'.
hp [Thu, 13 Nov 2008 10:56:59 +0000 (10:56 +0000)]
* nm.c (filter_symbols): Only call memcpy when from != to.
brobecke [Thu, 13 Nov 2008 05:05:07 +0000 (05:05 +0000)]
* ia64-tdep.c: Remove commented out #define.
hp [Thu, 13 Nov 2008 03:01:14 +0000 (03:01 +0000)]
PR ld/7028
* elf.c (assign_file_positions_for_load_sections): Allocate phrds
with bfd_zalloc2 instead of bfd_alloc2. For the amount, use
the possibly-preset header-size, not the computed one.
brobecke [Thu, 13 Nov 2008 01:26:43 +0000 (01:26 +0000)]
* remote-sim.c (gdbsim_mourn_inferior): Use "target" parameter
instead of the "gdbsim_ops" global.
amodra [Thu, 13 Nov 2008 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Thu, 13 Nov 2008 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
joel [Wed, 12 Nov 2008 22:05:17 +0000 (22:05 +0000)]
2008-11-12 Joel Sherrill <joel.sherrill@oarcorp.com>
* aclocal.m4: Fix underquoting of function names.
amodra [Wed, 12 Nov 2008 22:04:03 +0000 (22:04 +0000)]
PR 7023
* elf.c (bfd_section_from_shdr <SHT_SYMTAB>): Fail on invalid sh_info.
corinna [Wed, 12 Nov 2008 11:04:26 +0000 (11:04 +0000)]
* autoload.cc (GetSystemDEPPolicy): Define.
(GetProcessDEPPolicy): Ditto.
(SetProcessDEPPolicy): Ditto.
* dcrt0.cc (disable_dep): New static function.
(dll_crt0_0): Call disable_dep on platforms requiring it. Add longish
comment to explain the circumstances.
* wincap.h (wincaps::ts_has_dep_problem): New element.
* wincap.cc: Implement above element throughout.
(wincapc::init): Set ts_has_dep_problem to true on 2008 Terminal
Servers.
* winsup.h (WINVER): Set to 0x0601.
gingold [Wed, 12 Nov 2008 10:27:57 +0000 (10:27 +0000)]
2008-11-12 Tristan Gingold <gingold@adacore.com>
* bfd.c (bfd_get_sign_extend_vma): Return 0 for mach-o.