OSDN Git Service
Rafał Miłecki [Wed, 6 Jan 2021 09:09:15 +0000 (10:09 +0100)]
net: dsa: print error on invalid port index
Looking for an -EINVAL all over the dsa code could take hours for
inexperienced DSA users.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210106090915.21439-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Masanari Iida [Tue, 5 Jan 2021 14:40:29 +0000 (23:40 +0900)]
net-next: docs: Fix typos in snmp_counter.rst
This patch fixes some spelling typos in snmp_counter.rst
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Jan 2021 01:05:12 +0000 (17:05 -0800)]
Merge branch 'net-ks8851-Add-KS8851-PHY-support'
Marek Vasut says:
====================
net: ks8851: Add KS8851 PHY support
The KS8851 has a reduced internal PHY, which is accessible through its
registers at offset 0xe4. The PHY is compatible with KS886x PHY present
in Micrel switches, including the PHY ID Low/High registers swap, which
is present both in the MAC and the switch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Tue, 5 Jan 2021 14:11:51 +0000 (15:11 +0100)]
net: ks8851: Register MDIO bus and the internal PHY
The KS8851 has a reduced internal PHY, which is accessible through its
registers at offset 0xe4. The PHY is compatible with KS886x PHY present
in Micrel switches, except the PHY ID Low/High registers are swapped.
Register MDIO bus so this PHY can be detected and probed by phylib.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Tue, 5 Jan 2021 14:11:50 +0000 (15:11 +0100)]
net: phy: micrel: Add KS8851 PHY support
The KS8851 has a reduced internal PHY, which is accessible through its
registers at offset 0xe4. The PHY is compatible with KS886x PHY present
in Micrel switches, including the PHY ID Low/High registers swap, which
is present both in the MAC and the switch.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunjian Wang [Tue, 5 Jan 2021 06:31:34 +0000 (14:31 +0800)]
macvlan: remove redundant null check on data
Because macvlan_common_newlink() and macvlan_changelink() already
checked NULL data parameter, so the additional check is unnecessary,
just remove it.
Fixes:
79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Mon, 4 Jan 2021 07:20:39 +0000 (12:50 +0530)]
octeontx2-pf: Add RSS multi group support
Hardware supports 8 RSS groups per interface. Currently we are using
only group '0'. This patch allows user to create new RSS groups/contexts
and use the same as destination for flow steering rules.
usage:
To steer the traffic to RQ 2,3
ethtool -X eth0 weight 0 0 1 1 context new
(It will print the allocated context id number)
New RSS context is 1
ethtool -N eth0 flow-type tcp4 dst-port 80 context 1 loc 1
To delete the context
ethtool -X eth0 context 1 delete
When an RSS context is removed, the active classification
rules using this context are also removed.
Change-log:
v4
- Fixed compiletime warning.
- Address Saeed's comments on v3.
v3
- Coverted otx2_set_rxfh() to use new function.
v2
- Removed unrelated whitespace
- Coverted otx2_get_rxfh() to use new function.
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bongsu Jeon [Thu, 31 Dec 2020 02:59:26 +0000 (11:59 +0900)]
net: nfc: nci: Change the NCI close sequence
If there is a NCI command in work queue after closing the NCI device at
nci_unregister_device, The NCI command timer starts at flush_workqueue
function and then NCI command timeout handler would be called 5 second
after flushing the NCI command work queue and destroying the queue.
At that time, the timeout handler would try to use NCI command work queue
that is destroyed already. it will causes the problem. To avoid this
abnormal situation, change the sequence to prevent the NCI command timeout
handler from being called after destroying the NCI command work queue.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 30 Dec 2020 09:18:09 +0000 (17:18 +0800)]
net: kcm: Replace fput with sockfd_put
The function sockfd_lookup uses fget on the value that is stored in
the file field of the returned structure, so fput should ultimately be
applied to this value. This can be done directly, but it seems better
to use the specific macro sockfd_put, which does the same thing.
Perform a source code refactoring by using the following semantic patch.
// <smpl>
@@
expression s;
@@
s = sockfd_lookup(...)
...
+ sockfd_put(s);
- fput(s->file);
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Wed, 30 Dec 2020 08:18:35 +0000 (16:18 +0800)]
net/mlxfw: Use kzalloc for allocating only one thing
Use kzalloc rather than kcalloc(1,...)
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
@@
- kcalloc(1,
+ kzalloc(
...)
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 5 Jan 2021 23:44:45 +0000 (15:44 -0800)]
Merge tag 'mlx5-updates-2021-01-05' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-01-05
SW steering, Refactor to have a device specific STE layer below dr_ste
This series introduces some improvements and refactoring by adding a new layer
below dr_ste to allow support for different devices format.
It adds a struct of device specific callbacks for STE layer below dr_ste.
Each device will implement its HW-specific function, and a common logic
from the DR code will access these functions through the new ste_ctx API.
Connect-X5-style steering format is called STE_v0.
In the next patch series we bring the Connect-X6-style format - STE_v1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:53:09 +0000 (21:53 +0800)]
octeontx2-af: Use kzalloc for allocating only one thing
Use kzalloc rather than kcalloc(1,...)
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
@@
- kcalloc(1,
+ kzalloc(
...)
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:53:01 +0000 (21:53 +0800)]
iavf: Use kzalloc for allocating only one thing
Use kzalloc rather than kcalloc(1,...)
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
@@
- kcalloc(1,
+ kzalloc(
...)
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:52:54 +0000 (21:52 +0800)]
liquidio: Use kzalloc for allocating only one thing
Use kzalloc rather than kcalloc(1,...)
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
@@
- kcalloc(1,
+ kzalloc(
...)
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:52:46 +0000 (21:52 +0800)]
bnxt_en: Use kzalloc for allocating only one thing
Use kzalloc rather than kcalloc(1,...)
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
@@
- kcalloc(1,
+ kzalloc(
...)
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:52:38 +0000 (21:52 +0800)]
net: dsa: sja1105: Use kzalloc for allocating only one thing
Use kzalloc rather than kcalloc(1,...)
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
@@
- kcalloc(1,
+ kzalloc(
...)
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:49:54 +0000 (21:49 +0800)]
cavium/liquidio: Use DEFINE_SPINLOCK() for spinlock
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:49:47 +0000 (21:49 +0800)]
net: ixp4xx_eth: Use DEFINE_SPINLOCK() for spinlock
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:49:27 +0000 (21:49 +0800)]
net: usb: Use DEFINE_SPINLOCK() for spinlock
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:49:18 +0000 (21:49 +0800)]
net: wan: Use DEFINE_SPINLOCK() for spinlock
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:49:04 +0000 (21:49 +0800)]
net: tipc: Replace expression with offsetof()
Use the existing offsetof() macro instead of duplicating code.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yongjun [Tue, 29 Dec 2020 13:48:56 +0000 (21:48 +0800)]
net: wan: Replace simple_strtol by simple_strtoul
The simple_strtol() function is deprecated, use simple_strtoul() instead.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loic Poulain [Tue, 29 Dec 2020 09:04:54 +0000 (10:04 +0100)]
net: mhi: Add raw IP mode support
MHI net is protocol agnostic, the payload protocol depends on the modem
configuration, which can be either RMNET (IP muxing and aggregation) or
raw IP. This patch adds support for incomming IPv4/IPv6 packets, that
was previously unconditionnaly reported as RMNET packets.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 5 Jan 2021 23:19:19 +0000 (15:19 -0800)]
Merge branch 'enetc-code-cleanups'
Michael Walle says:
====================
enetc: code cleanups
This are some code cleanups in the MDIO part of the enetc. They are
intended to make the code more readable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Mon, 28 Dec 2020 13:00:34 +0000 (14:00 +0100)]
enetc: reorder macros and functions
Now that there aren't any more macros with parameters, move the macros
above any functions.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Mon, 28 Dec 2020 13:00:33 +0000 (14:00 +0100)]
enetc: drop MDIO_DATA() macro
value is u16, masking with 0xffff is a nop. Drop it.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Mon, 28 Dec 2020 13:00:32 +0000 (14:00 +0100)]
enetc: don't use macro magic for the readx_poll_timeout() callback
The macro enetc_mdio_rd_reg() is just used in that particular case and
has a hardcoded parameter name "mdio_priv". Define a specific function
to use for readx_poll_timeout() instead. Also drop the TIMEOUT macro
since it is used just once.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Mon, 28 Dec 2020 13:00:31 +0000 (14:00 +0100)]
enetc: drop unneeded indirection
Before commit
6517798dd343 ("enetc: Make MDIO accessors more generic and
export to include/linux/fsl") these macros actually had some benefits.
But after the commit it just makes the code hard to read. Drop the macro
indirections.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevgeny Kliteynik [Thu, 19 Nov 2020 05:15:49 +0000 (07:15 +0200)]
net/mlx5: DR, Move STEv0 modify header logic
Move HW specific modify header fields and logic to STEv0 file
and use the new STE context callbacks.
Since STEv0 and STEv1 modify actions values are different, each
version has its own implementation.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 05:14:27 +0000 (07:14 +0200)]
net/mlx5: DR, Add STE modify header actions per-device API
Extend the STE context struct with per-device modify header actions.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 05:03:43 +0000 (07:03 +0200)]
net/mlx5: DR, Move STEv0 action apply logic
Use STE tx/rx actions per-device API: move HW specific
action apply logic from dr_ste to STEv0 file - STEv0 and
STEv1 actions format is different, each version should
have its own implementation.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 04:48:33 +0000 (06:48 +0200)]
net/mlx5: DR, Add STE tx/rx actions per-device API
Extend the STE context struct with per-device
tx/rx actions.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 04:44:45 +0000 (06:44 +0200)]
net/mlx5: DR, Move STEv0 setters and getters
Use the new setters and getters API for STEv0: move HW specific setter and
getters from dr_ste to STEv0 file. Since STEv0 and STEv1 format are
different each version should implemented different setters and getters.
Rename remaining static functions w/o mlx5 prefix.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 04:41:57 +0000 (06:41 +0200)]
net/mlx5: DR, Add STE setters and getters per-device API
Extend the STE context struct with various per-device
setters and getters.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 22 Sep 2020 01:22:31 +0000 (04:22 +0300)]
net/mlx5: DR, Move action apply logic to dr_ste
The action apply logic is device specific per STE version,
moving to the STE layer will allow implementing it for
both devices while keeping DR upper layers the same.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 22 Sep 2020 01:22:24 +0000 (04:22 +0300)]
net/mlx5: DR, Refactor ICMP STE builder
Reworked ICMP tag builder to better handle ICMP v4/6 fields and avoid unneeded
code duplication and 'if' statements, removed unused macro, changed bitfield
of len 8 to u8.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 22 Sep 2020 01:22:12 +0000 (04:22 +0300)]
net/mlx5: DR, Move STEv0 look up types from mlx5_ifc_dr header
The lookup types are device specific and should not be
exposed to DR upper layers, matchers/tables.
Each HW STE version should keep them internal.
The lu_type size is updated to support larger lu_types as
required for STEv1.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 22 Sep 2020 01:22:02 +0000 (04:22 +0300)]
net/mlx5: DR, Merge similar DR STE SET macros
Merge DR_STE_STE macros for better code reuse, the macro
DR_STE_SET_MASK_V and DR_STE_SET_TAG are merged to avoid
tag and bit_mask function creation which are usually the
same.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Wed, 28 Oct 2020 23:33:00 +0000 (01:33 +0200)]
net/mlx5: DR, Fix STEv0 source_eswitch_owner_vhca_id support
Check vport_cap only if match on source gvmi is required.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 04:20:07 +0000 (06:20 +0200)]
net/mlx5: DR, Remove unused macro definition from dr_ste
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 04:18:01 +0000 (06:18 +0200)]
net/mlx5: DR, Move HW STEv0 match logic to a separate file
Move current STE match logic to a seprate file.
This file will be used for HW specific STEv0.
Future patches will add functionality for v1 steering.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 04:03:40 +0000 (06:03 +0200)]
net/mlx5: DR, Use the new HW specific STE infrastructure
Split the STE builders functionality into the common part and
device-specific part. All the device-specific part (with 'v0' in
the function names) is accessed through the STE context structure.
Subsequent patches will have the device-specific logic moved to a
separate file.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 03:16:38 +0000 (05:16 +0200)]
net/mlx5: DR, Move macros from dr_ste.c to header
Move some macros from dr_ste.c to header - these macros
will be used by all the format-specific functions.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 19 Nov 2020 02:53:53 +0000 (04:53 +0200)]
net/mlx5: DR, Add infrastructure for supporting several steering formats
Add a struct of device specific callbacks for STE layer below dr_ste.
Each device will implement its HW-specific function, and a comon logic
from the DR code will access these functions through the new ste_ctx API.
More callbacks will follow in the subsequent patches.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Linus Torvalds [Tue, 5 Jan 2021 20:46:27 +0000 (12:46 -0800)]
Merge tag 'arc-5.11-rc3' of git://git./linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
"Things are quieter on upstreaming front as we are mostly focusing on
ARCv3/ARC64 port.
This contains just build system updates from Masahiro Yamada"
* tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: use $(READELF) instead of hard-coded readelf
ARC: build: remove unneeded extra-y
ARC: build: move symlink creation to arch/arc/Makefile to avoid race
ARC: build: add boot_targets to PHONY
ARC: build: add uImage.lzma to the top-level target
ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
Linus Torvalds [Tue, 5 Jan 2021 20:38:56 +0000 (12:38 -0800)]
Merge tag 'net-5.11-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
Linus Torvalds [Tue, 5 Jan 2021 19:55:46 +0000 (11:55 -0800)]
Merge tag 'afs-fixes-
04012021' of git://git./linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Two fixes.
The first is the fix for the strnlen() array limit check and the
second fixes the calculation of the number of dirent records used to
represent any particular filename length"
* tag 'afs-fixes-
04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix directory entry size calculation
afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
Linus Torvalds [Tue, 5 Jan 2021 19:33:00 +0000 (11:33 -0800)]
mm: make wait_on_page_writeback() wait for multiple pending writebacks
Ever since commit
2a9127fcf229 ("mm: rewrite wait_on_page_bit_common()
logic") we've had some very occasional reports of BUG_ON(PageWriteback)
in write_cache_pages(), which we thought we already fixed in commit
073861ed77b6 ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)").
But syzbot just reported another one, even with that commit in place.
And it turns out that there's a simpler way to trigger the BUG_ON() than
the one Hugh found with page re-use. It all boils down to the fact that
the page writeback is ostensibly serialized by the page lock, but that
isn't actually really true.
Yes, the people _setting_ writeback all do so under the page lock, but
the actual clearing of the bit - and waking up any waiters - happens
without any page lock.
This gives us this fairly simple race condition:
CPU1 = end previous writeback
CPU2 = start new writeback under page lock
CPU3 = write_cache_pages()
CPU1 CPU2 CPU3
---- ---- ----
end_page_writeback()
test_clear_page_writeback(page)
... delayed...
lock_page();
set_page_writeback()
unlock_page()
lock_page()
wait_on_page_writeback();
wake_up_page(page, PG_writeback);
.. wakes up CPU3 ..
BUG_ON(PageWriteback(page));
where the BUG_ON() happens because we woke up the PG_writeback bit
becasue of the _previous_ writeback, but a new one had already been
started because the clearing of the bit wasn't actually atomic wrt the
actual wakeup or serialized by the page lock.
The reason this didn't use to happen was that the old logic in waiting
on a page bit would just loop if it ever saw the bit set again.
The nice proper fix would probably be to get rid of the whole "wait for
writeback to clear, and then set it" logic in the writeback path, and
replace it with an atomic "wait-to-set" (ie the same as we have for page
locking: we set the page lock bit with a single "lock_page()", not with
"wait for lock bit to clear and then set it").
However, out current model for writeback is that the waiting for the
writeback bit is done by the generic VFS code (ie write_cache_pages()),
but the actual setting of the writeback bit is done much later by the
filesystem ".writepages()" function.
IOW, to make the writeback bit have that same kind of "wait-to-set"
behavior as we have for page locking, we'd have to change our roughly
~50 different writeback functions. Painful.
Instead, just make "wait_on_page_writeback()" loop on the very unlikely
situation that the PG_writeback bit is still set, basically re-instating
the old behavior. This is very non-optimal in case of contention, but
since we only ever set the bit under the page lock, that situation is
controlled.
Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com
Fixes:
2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Mon, 4 Jan 2021 22:02:02 +0000 (14:02 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing sanitization of rateest userspace string, bug has been
triggered by syzbot, patch from Florian Westphal.
2) Report EOPNOTSUPP on missing set features in nft_dynset, otherwise
error reporting to userspace via EINVAL is misleading since this is
reserved for malformed netlink requests.
3) New binaries with old kernels might silently accept several set
element expressions. New binaries set on the NFT_SET_EXPR and
NFT_DYNSET_F_EXPR flags to request for several expressions per
element, hence old kernels which do not support for this bail out
with EOPNOTSUPP.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables: add set expression flags
netfilter: nft_dynset: report EOPNOTSUPP on missing set feature
netfilter: xt_RATEEST: reject non-null terminated string from userspace
====================
Link: https://lore.kernel.org/r/20210103192920.18639-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 4 Jan 2021 21:47:17 +0000 (13:47 -0800)]
Merge branch 'net-dsa-lantiq_gswip-two-fixes-for-net-stable'
Martin Blumenstingl says:
====================
net: dsa: lantiq_gswip: two fixes for -net/-stable
While testing the lantiq_gswip driver in OpenWrt at least one board had
a non-working Ethernet port connected to an internal 100Mbit/s PHY22F
GPHY. The problem which could be observed:
- the PHY would detect the link just fine
- ethtool stats would see the TX counter rise
- the RX counter in ethtool was stuck at zero
It turns out that two independent patches are needed to fix this:
- first we need to enable the MII data lines also for internal PHYs
- second we need to program the GSWIP_MII_CFG registers for all ports
except the CPU port
These two patches have also been tested by back-porting them on top of
Linux 5.4.86 in OpenWrt.
Special thanks to Hauke for debugging and brainstorming this on IRC
with me!
====================
Link: https://lore.kernel.org/r/20210103012544.3259029-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl [Sun, 3 Jan 2021 01:25:44 +0000 (02:25 +0100)]
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
There is one GSWIP_MII_CFG register for each switch-port except the CPU
port. The register offset for the first port is 0x0, 0x02 for the
second, 0x04 for the third and so on.
Update the driver to not only restrict the GSWIP_MII_CFG registers to
ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This
means we are not overwriting the configuration for the third port (port
two since we start counting from zero) with the settings for the sixth
port (with number five) anymore.
The GSWIP_MII_PCDU(p) registers are not updated because there's really
only three (one for each of the following ports: 0, 1, 5).
Fixes:
14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl [Sun, 3 Jan 2021 01:25:43 +0000 (02:25 +0100)]
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow.
Without this the PHY link is detected properly and ethtool statistics
for TX are increasing but there's no RX traffic coming in.
Fixes:
14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xie He [Thu, 31 Dec 2020 17:43:31 +0000 (09:43 -0800)]
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
In lapb_device_event, lapb_devtostruct is called to get a reference to
an object of "struct lapb_cb". lapb_devtostruct increases the refcount
of the object and returns a pointer to it. However, we didn't decrease
the refcount after we finished using the pointer. This patch fixes this
problem.
Fixes:
a4989fa91110 ("net/lapb: support netdev events")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201231174331.64539-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Wed, 30 Dec 2020 18:33:34 +0000 (19:33 +0100)]
r8169: work around power-saving bug on some chip versions
A user reported failing network with RTL8168dp (a quite rare chip
version). Realtek confirmed that few chip versions suffer from a PLL
power-down hw bug.
Fixes:
07df5bd874f0 ("r8169: power down chip in probe")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjørn Mork [Wed, 30 Dec 2020 15:24:51 +0000 (16:24 +0100)]
net: usb: qmi_wwan: add Quectel EM160R-GL
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA,
and ff/ff/ff for RMNET/QMI.
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=
e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Wed, 30 Dec 2020 11:42:51 +0000 (13:42 +0200)]
selftests: mlxsw: Set headroom size of correct port
The test was setting the headroom size of the wrong port. This was not
visible because of a firmware bug that canceled this bug.
Set the headroom size of the correct port, so that the test will pass
with both old and new firmware versions.
Fixes:
bfa804784e32 ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20201230114251.394009-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Charles Keepax [Mon, 4 Jan 2021 10:38:02 +0000 (10:38 +0000)]
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
macb_set_tx_clk were gated on the presence of this flag.
- if (!clk)
+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
However the flag was not added to anything other than the new
sama7g5_gem, turning that function call into a no op for all other
systems. This breaks the networking on Zynq.
The commit message adding this states: a new capability so that
macb_set_tx_clock() to not be called for IPs having this
capability
This strongly implies that present of the flag was intended to skip
the function not absence of the flag. Update the if statement to
this effect, which repairs the existing users.
Fixes:
daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YANG LI [Wed, 30 Dec 2020 07:23:14 +0000 (15:23 +0800)]
ibmvnic: fix: NULL pointer dereference.
The error is due to dereference a null pointer in function
reset_one_sub_crq_queue():
if (!scrq) {
netdev_dbg(adapter->netdev,
"Invalid scrq reset. irq (%d) or msgs(%p).\n",
scrq->irq, scrq->msgs);
return -EINVAL;
}
If the expression is true, scrq must be a null pointer and cannot
dereference.
Fixes:
9281cf2d5840 ("ibmvnic: avoid memset null scrq msgs")
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci <abaci@linux.alibaba.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Baruch Siach [Tue, 29 Dec 2020 09:08:39 +0000 (11:08 +0200)]
docs: networking: packet_mmap: fix old config reference
Before commit
889b8f964f2f ("packet: Kill CONFIG_PACKET_MMAP.") there
used to be a CONFIG_PACKET_MMAP config symbol that depended on
CONFIG_PACKET. The text still implies that PACKET_MMAP can be disabled.
Remove that from the text, as well as reference to old kernel versions.
Also, drop reference to broken link to information for pre 2.6.5
kernels.
Make a slight working improvement (s/In/On/) while at it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/80089f3783372c8fd7833f28ce774a171b2ef252.1609232919.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Baruch Siach [Tue, 29 Dec 2020 09:08:38 +0000 (11:08 +0200)]
docs: networking: packet_mmap: fix formatting for C macros
The citation of macro definitions should appear in a code block.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/5cb47005e7a59b64299e038827e295822193384c.1609232919.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunjian Wang [Tue, 29 Dec 2020 02:01:48 +0000 (10:01 +0800)]
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
Currently the vhost_zerocopy_callback() maybe be called to decrease
the refcount when sendmsg fails in tun. The error handling in vhost
handle_tx_zerocopy() will try to decrease the same refcount again.
This is wrong. To fix this issue, we only call vhost_net_ubuf_put()
when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS.
Fixes:
bab632d69ee4 ("vhost: vhost TX zero-copy support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 28 Dec 2020 15:21:46 +0000 (15:21 +0000)]
bareudp: Fix use of incorrect min_headroom size
In the bareudp6_xmit_skb(), it calculates min_headroom.
At that point, it uses struct iphdr, but it's not correct.
So panic could occur.
The struct ipv6hdr should be used.
Test commands:
ip netns add A
ip netns add B
ip link add veth0 netns A type veth peer name veth1 netns B
ip netns exec A ip link set veth0 up
ip netns exec A ip a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set veth1 up
ip netns exec B ip a a 2001:db8:0::2/64 dev veth1
for i in {10..1}
do
let A=$i-1
ip netns exec A ip link add bareudp$i type bareudp dstport $i \
ethertype 0x86dd
ip netns exec A ip link set bareudp$i up
ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i
ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \
2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \
dev bareudp$i
ip netns exec B ip link add bareudp$i type bareudp dstport $i \
ethertype 0x86dd
ip netns exec B ip link set bareudp$i up
ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i
ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \
2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \
dev bareudp$i
done
ip netns exec A ping 2001:db8:7::2
Splat looks like:
[ 66.436679][ C2] skbuff: skb_under_panic: text:
ffffffff928614c8 len:454 put:14 head:
ffff88810abb4000 data:
ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0
[ 66.441626][ C2] ------------[ cut here ]------------
[ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109!
[ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819
[ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f
[ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80
[ 66.462314][ C2] RSP: 0018:
ffff888119209648 EFLAGS:
00010286
[ 66.464281][ C2] RAX:
0000000000000089 RBX:
ffff888003159000 RCX:
0000000000000000
[ 66.467216][ C2] RDX:
0000000000000089 RSI:
0000000000000008 RDI:
ffffed10232412c0
[ 66.469768][ C2] RBP:
ffff88810a53d440 R08:
ffffed102328018d R09:
ffffed102328018d
[ 66.472297][ C2] R10:
ffff888119400c67 R11:
ffffed102328018c R12:
000000000000000e
[ 66.474833][ C2] R13:
ffff88810abb3ffa R14:
00000000000001c0 R15:
0000000000003ec0
[ 66.477361][ C2] FS:
00007f37c0c72f00(0000) GS:
ffff888119200000(0000) knlGS:
0000000000000000
[ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 66.482296][ C2] CR2:
000055a058808570 CR3:
000000011039e002 CR4:
00000000003706e0
[ 66.484811][ C2] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 66.487793][ C2] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 66.490424][ C2] Call Trace:
[ 66.491469][ C2] <IRQ>
[ 66.492374][ C2] ? eth_header+0x28/0x190
[ 66.494054][ C2] ? eth_header+0x28/0x190
[ 66.495401][ C2] skb_push.cold.99+0x22/0x22
[ 66.496700][ C2] eth_header+0x28/0x190
[ 66.497867][ C2] neigh_resolve_output+0x3de/0x720
[ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0
[ 66.501176][ C2] __neigh_update+0x8bd/0x20a0
[ 66.502749][ C2] ndisc_update+0x34/0xc0
[ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80
[ 66.505041][ C2] ? pndisc_redo+0x20/0x20
[ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 66.506965][ C2] ndisc_rcv+0x3a0/0x470
[ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00
[ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560
[ 66.509719][ C2] ip6_input_finish+0x5b/0xf0
[ 66.510615][ C2] ip6_input+0xcd/0x2d0
[ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0
[ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0
[ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560
[ 66.514414][ C2] ipv6_rcv+0xe8/0x300
[ ... ]
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes:
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 28 Dec 2020 15:21:36 +0000 (15:21 +0000)]
bareudp: set NETIF_F_LLTX flag
Like other tunneling interfaces, the bareudp doesn't need TXLOCK.
So, It is good to set the NETIF_F_LLTX flag to improve performance and
to avoid lockdep's false-positive warning.
Test commands:
ip netns add A
ip netns add B
ip link add veth0 netns A type veth peer name veth1 netns B
ip netns exec A ip link set veth0 up
ip netns exec A ip a a 10.0.0.1/24 dev veth0
ip netns exec B ip link set veth1 up
ip netns exec B ip a a 10.0.0.2/24 dev veth1
for i in {2..1}
do
let A=$i-1
ip netns exec A ip link add bareudp$i type bareudp \
dstport $i ethertype ip
ip netns exec A ip link set bareudp$i up
ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i
ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \
dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i
ip netns exec B ip link add bareudp$i type bareudp \
dstport $i ethertype ip
ip netns exec B ip link set bareudp$i up
ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i
ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \
dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i
done
ip netns exec A ping 10.0.2.2
Splat looks like:
[ 96.992803][ T822] ============================================
[ 96.993954][ T822] WARNING: possible recursive locking detected
[ 96.995102][ T822] 5.10.0+ #819 Not tainted
[ 96.995927][ T822] --------------------------------------------
[ 96.997091][ T822] ping/822 is trying to acquire lock:
[ 96.998083][ T822]
ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[ 96.999813][ T822]
[ 96.999813][ T822] but task is already holding lock:
[ 97.001192][ T822]
ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[ 97.002908][ T822]
[ 97.002908][ T822] other info that might help us debug this:
[ 97.004401][ T822] Possible unsafe locking scenario:
[ 97.004401][ T822]
[ 97.005784][ T822] CPU0
[ 97.006407][ T822] ----
[ 97.007010][ T822] lock(_xmit_NONE#2);
[ 97.007779][ T822] lock(_xmit_NONE#2);
[ 97.008550][ T822]
[ 97.008550][ T822] *** DEADLOCK ***
[ 97.008550][ T822]
[ 97.010057][ T822] May be due to missing lock nesting notation
[ 97.010057][ T822]
[ 97.011594][ T822] 7 locks held by ping/822:
[ 97.012426][ T822] #0:
ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00
[ 97.014191][ T822] #1:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[ 97.016045][ T822] #2:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[ 97.017897][ T822] #3:
ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[ 97.019684][ T822] #4:
ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp]
[ 97.021573][ T822] #5:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[ 97.023424][ T822] #6:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[ 97.025259][ T822]
[ 97.025259][ T822] stack backtrace:
[ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819
[ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 97.029407][ T822] Call Trace:
[ 97.030015][ T822] dump_stack+0x99/0xcb
[ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9
[ 97.031773][ T822] ? stack_trace_save+0x81/0xa0
[ 97.032661][ T822] ? register_lock_class+0x1910/0x1910
[ 97.033673][ T822] ? register_lock_class+0x1910/0x1910
[ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0
[ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0
[ 97.036690][ T822] lock_acquire+0x1b2/0x730
[ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960
[ 97.038466][ T822] ? check_flags+0x50/0x50
[ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0
[ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10
[ 97.041151][ T822] _raw_spin_lock+0x30/0x70
[ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960
[ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960
[ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290
[ 97.044824][ T822] ? mark_held_locks+0xb7/0x120
[ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0
[ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0
[ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0
[ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120
[ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0
[ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0
[ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0
[ 97.052443][ T822] ? check_chain_key+0x244/0x5f0
[ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0
[ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020
[ 97.055263][ T822] ? pneigh_lookup+0x410/0x410
[ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020
[ ... ]
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes:
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 4 Jan 2021 18:55:19 +0000 (10:55 -0800)]
Merge branch 'rcu/urgent' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This is a fix for a regression in the v5.10 merge window, but it was
reported quite late in the v5.10 process, plus generating and testing
the fix took some time.
The regression is due to commit
36dadef23fcc ("kprobes: Init kprobes
in early_initcall") which on powerpc can use RCU Tasks before
initialization, resulting in boot failures.
The fix is straightforward, simply moving initialization of RCU Tasks
before the early_initcall()s. The fix has been exposed to -next and
kbuild test robot testing, and has been tested by the PowerPC guys"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Move RCU-tasks initialization to before early_initcall()
Linus Torvalds [Mon, 4 Jan 2021 18:47:38 +0000 (10:47 -0800)]
Merge tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux
Pull ENABLE_MUST_CHECK removal from Miguel Ojeda:
"Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)"
Note that this removes the config option by making the must-check
unconditional, not by removing must check itself.
* tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux:
Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK
David Howells [Wed, 23 Dec 2020 10:39:57 +0000 (10:39 +0000)]
afs: Fix directory entry size calculation
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.
The calculation we need to use is:
1 + (((strlen(name) + 1) + 15) >> 5)
where we are adding one to the strlen() result to account for the NUL
termination.
Fix this by the following means:
(1) Create an inline function to do the calculation for a given name
length.
(2) Use the function to calculate the number of records used for a dirent
in afs_dir_iterate_block().
Use this to move the over-end check out of the loop since it only
needs to be done once.
Further use this to only go through the loop for the 2nd+ records
composing an entry. The only test there now is for if the record is
allocated - and we already checked the first block at the top of the
outer loop.
(3) Add a max name length check in afs_dir_iterate_block().
(4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
from (1) to calculate the number of blocks rather than doing it
incorrectly themselves.
Fixes:
63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
David Howells [Mon, 21 Dec 2020 22:37:58 +0000 (22:37 +0000)]
afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
AFS has a structured layout in its directory contents (AFS dirs are
downloaded as files and parsed locally by the client for lookup/readdir).
The slots in the directory are defined by union afs_xdr_dirent. This,
however, only directly allows a name of a length that will fit into that
union. To support a longer name, the next 1-8 contiguous entries are
annexed to the first one and the name flows across these.
afs_dir_iterate_block() uses strnlen(), limited to the space to the end of
the page, to find out how long the name is. This worked fine until
6a39e62abbaf. With that commit, the compiler determines the size of the
array and asserts that the string fits inside that array. This is a
problem for AFS because we *expect* it to overflow one or more arrays.
A similar problem also occurs in afs_dir_scan_block() when a directory file
is being locally edited to avoid the need to redownload it. There strlen()
was being used safely because each page has the last byte set to 0 when the
file is downloaded and validated (in afs_dir_check_page()).
Fix this by changing the afs_xdr_dirent union name field to an
indeterminate-length array and dropping the overflow field.
(Note that whilst looking at this, I realised that the calculation of the
number of slots a dirent used is non-standard and not quite right, but I'll
address that in a separate patch.)
The issue can be triggered by something like:
touch /afs/example.com/thisisaveryveryverylongname
and it generates a report that looks like:
detected buffer overflow in strnlen
------------[ cut here ]------------
kernel BUG at lib/string.c:1149!
...
RIP: 0010:fortify_panic+0xf/0x11
...
Call Trace:
afs_dir_iterate_block+0x12b/0x35b
afs_dir_iterate+0x14e/0x1ce
afs_do_lookup+0x131/0x417
afs_lookup+0x24f/0x344
lookup_open.isra.0+0x1bb/0x27d
open_last_lookups+0x166/0x237
path_openat+0xe0/0x159
do_filp_open+0x48/0xa4
? kmem_cache_alloc+0xf5/0x16e
? __clear_close_on_exec+0x13/0x22
? _raw_spin_unlock+0xa/0xb
do_sys_openat2+0x72/0xde
do_sys_open+0x3b/0x58
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: Daniel Axtens <dja@axtens.net>
Linus Torvalds [Sun, 3 Jan 2021 23:55:30 +0000 (15:55 -0800)]
Linux 5.11-rc2
Linus Torvalds [Sat, 2 Jan 2021 20:22:46 +0000 (12:22 -0800)]
Merge tag 's390-5.11-3' of git://git./linux/kernel/git/s390/linux
Pull s390 cleanups from Vasily Gorbik:
"Update defconfigs and sort config select list"
* tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/Kconfig: sort config S390 select list once again
s390: update defconfigs
Linus Torvalds [Sat, 2 Jan 2021 19:53:05 +0000 (11:53 -0800)]
Merge tag 'pm-5.11-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash in intel_pstate during resume from suspend-to-RAM
that may occur after recent changes and two resource leaks in error
paths in the operating performance points (OPP) framework, add a new
C-states table to intel_idle and update the cpuidle MAINTAINERS entry
to cover the governors too.
Specifics:
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in the
OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that the
governors are covered by it too (Lukas Bulwahn)"
* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: add SnowRidge C-state table
cpufreq: intel_pstate: Fix fast-switch fallback path
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
Rafael J. Wysocki [Sat, 2 Jan 2021 09:16:32 +0000 (10:16 +0100)]
Merge branches 'pm-cpufreq' and 'pm-cpuidle'
* pm-cpufreq:
cpufreq: intel_pstate: Fix fast-switch fallback path
* pm-cpuidle:
intel_idle: add SnowRidge C-state table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
Linus Torvalds [Fri, 1 Jan 2021 20:58:07 +0000 (12:58 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
Linus Torvalds [Fri, 1 Jan 2021 20:49:09 +0000 (12:49 -0800)]
Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two minor block fixes from this last week that should go into 5.11:
- Add missing NOWAIT debugfs definition (Andres)
- Fix kerneldoc warning introduced this merge window (Randy)"
* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
Linus Torvalds [Fri, 1 Jan 2021 20:29:49 +0000 (12:29 -0800)]
Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
Linus Torvalds [Mon, 28 Dec 2020 19:40:22 +0000 (11:40 -0800)]
depmod: handle the case of /sbin/depmod without /sbin in PATH
Commit
436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).
Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:16 +0000 (21:34 +0000)]
kernel/io_uring: cancel io_uring before task works
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:15 +0000 (21:34 +0000)]
io_uring: fix io_sqe_files_unregister() hangs
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:14 +0000 (21:34 +0000)]
io_uring: add a helper for setting a ref node
Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Wed, 30 Dec 2020 20:02:12 +0000 (12:02 -0800)]
Merge tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for an edge case in MClientRequest encoding and a couple of
trivial fixups for the new msgr2 support"
* tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client:
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
libceph: align session_key and con_secret to 16 bytes
libceph: fix auth_signature buffer allocation in secure mode
ceph: reencode gid_list when reconnecting
Artem Bityutskiy [Sun, 27 Dec 2020 10:11:16 +0000 (12:11 +0200)]
intel_idle: add SnowRidge C-state table
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville
platforms.
The following has been changed.
1. C1E latency changed from 10us to 15us. It was measured using the
open source "wult" tool (the "nic" method, 15us is the 99.99th
percentile).
2. C1E power break even changed from 20us to 25us, which may result
in less C1E residency in some workloads.
3. C6 latency changed from 50us to 130us. Measured the same way as C1E.
The C6 C-state is supported only by some SnowRidge revisions, so add a C-state
table commentary about this.
On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of
the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even
though C6 is present in the table, the driver will only use it if the CPU does
support it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Tue, 29 Dec 2020 17:08:18 +0000 (18:08 +0100)]
cpufreq: intel_pstate: Fix fast-switch fallback path
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit
a365ab6b9dfb ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes:
a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 30 Dec 2020 17:19:34 +0000 (18:19 +0100)]
Merge branch 'opp/linux-next' of git://git./linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for 5.11-rc2
from Viresh Kumar:
"This contains two patches to fix freeing of resources in error paths."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
Heiko Carstens [Mon, 28 Dec 2020 08:51:57 +0000 (09:51 +0100)]
s390/Kconfig: sort config S390 select list once again
...and add comments at the top and bottom.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Heiko Carstens [Wed, 18 Nov 2020 20:23:33 +0000 (21:23 +0100)]
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Andres Freund [Mon, 28 Dec 2020 19:27:18 +0000 (11:27 -0800)]
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
This was missed in
021a24460dc2. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes:
021a24460dc28e7412aecfae89f60e1847e685c0
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Randy Dunlap [Tue, 29 Dec 2020 03:47:06 +0000 (19:47 -0800)]
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
Fix new kernel-doc warnings in fs/block_dev.c:
../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'
Fixes:
4e7b5671c6a8 ("block: remove i_bdev")
Fixes:
37c3fc9abb25 ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Tue, 29 Dec 2020 23:45:49 +0000 (15:45 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 patches
Subsystems affected by this patch series: mm (selftests, hugetlb,
pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and
lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slub: call account_slab_page() after slab page initialization
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
lib/zlib: fix inflating zlib streams on s390
lib/genalloc: fix the overflow when size is too big
kdev_t: always inline major/minor helper functions
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
local64.h: make <asm/local64.h> mandatory
kasan: fix null pointer dereference in kasan_record_aux_stack
mm: generalise COW SMC TLB flushing race comment
mm/mremap.c: fix extent calculation
mm: memmap defer init doesn't work as expected
mm: add prototype for __add_to_page_cache_locked()
checkpatch: prefer strscpy to strlcpy
Revert "kbuild: avoid static_assert for genksyms"
mm/hugetlb: fix deadlock in hugetlb_cow error path
selftests/vm: fix building protection keys test
Roman Gushchin [Tue, 29 Dec 2020 23:15:07 +0000 (15:15 -0800)]
mm: slub: call account_slab_page() after slab page initialization
It's convenient to have page->objects initialized before calling into
account_slab_page(). In particular, this information can be used to
pre-alloc the obj_cgroup vector.
Let's call account_slab_page() a bit later, after the initialization of
page->objects.
This commit doesn't bring any functional change, but is required for
further optimizations.
[akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch]
Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 29 Dec 2020 23:15:04 +0000 (15:15 -0800)]
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
In commit
11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.
However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.
[rdunlap@infradead.org: remove dfltcc_syms.o from Makefile]
Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org
Fixes:
11fb479ff5d9 ("zlib: export S390 symbols for zlib modules")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya Leoshkevich [Tue, 29 Dec 2020 23:15:01 +0000 (15:15 -0800)]
lib/zlib: fix inflating zlib streams on s390
Decompressing zlib streams on s390 fails with "incorrect data check"
error.
Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior. At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values. For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.
Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.
Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com
Fixes:
126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Shijie [Tue, 29 Dec 2020 23:14:58 +0000 (15:14 -0800)]
lib/genalloc: fix the overflow when size is too big
Some graphic card has very big memory on chip, such as 32G bytes.
In the following case, it will cause overflow:
pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);
va = gen_pool_alloc(pool, SZ_4G);
The overflow occurs in gen_pool_alloc_algo_owner():
....
size = nbits << order;
....
The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.
This patch converts some "int" to "unsigned long", and
changes the compare code in while.
Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josh Poimboeuf [Tue, 29 Dec 2020 23:14:55 +0000 (15:14 -0800)]
kdev_t: always inline major/minor helper functions
Silly GCC doesn't always inline these trivial functions.
Fixes the following warning:
arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled
Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Shijie [Tue, 29 Dec 2020 23:14:52 +0000 (15:14 -0800)]
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
Add these macros, since we can use them in drivers.
Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 29 Dec 2020 23:14:49 +0000 (15:14 -0800)]
local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.
This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.
Build-tested on 21 of 25 arch-es. (tools problems on the others)
Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.
Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Walter Wu [Tue, 29 Dec 2020 23:14:46 +0000 (15:14 -0800)]
kasan: fix null pointer dereference in kasan_record_aux_stack
Syzbot reported the following [1]:
BUG: kernel NULL pointer dereference, address:
0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
2d993067 P4D
2d993067 PUD
19a3c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events free_ipc
RIP: 0010:kasan_record_aux_stack+0x77/0xb0
Add null checking slab object from kasan_get_alloc_meta() in order to
avoid null pointer dereference.
[1] https://syzkaller.appspot.com/x/log.txt?x=
10a82a50d00000
Link: https://lkml.kernel.org/r/20201228080018.23041-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicholas Piggin [Tue, 29 Dec 2020 23:14:43 +0000 (15:14 -0800)]
mm: generalise COW SMC TLB flushing race comment
I'm not sure if I'm completely missing something here, but AFAIKS the
reference to the mysterious "COW SMC race" confuses the issue. The
original changelog and mailing list thread didn't help me either.
This SMC race is where the problem was detected, but isn't the general
problem bigger and more obvious: that the new PTE could be picked up at
any time by any TLB while entries for the old PTE exist in other TLBs
before the TLB flush takes effect?
The case where the iTLB and dTLB of a CPU are pointing at different pages
is an interesting one but follows from the general problem.
The other (minor) thing with the comment I think it makes it a bit clearer
to say what the old code was doing (i.e., it avoids the race as opposed to
what?).
References:
4ce072f1faf29 ("mm: fix a race condition under SMC + COW")
Link: https://lkml.kernel.org/r/20201215121119.351650-1-npiggin@gmail.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kalesh Singh [Tue, 29 Dec 2020 23:14:40 +0000 (15:14 -0800)]
mm/mremap.c: fix extent calculation
When `next < old_addr`, `next - old_addr` arithmetic underflows causing
`extent` to be incorrect.
Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`.
Link: https://lkml.kernel.org/r/20201219170433.2418867-1-kaleshsingh@google.com
Fixes:
c49dd34018026 ("mm: speedup mremap on 1GB or larger regions")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Tue, 29 Dec 2020 23:14:37 +0000 (15:14 -0800)]
mm: memmap defer init doesn't work as expected
VMware observed a performance regression during memmap init on their
platform, and bisected to commit
73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.
Before the commit:
[0.033176] Normal zone:
1445888 pages used for memmap
[0.033176] Normal zone:
89391104 pages, LIFO batch:63
[0.035851] ACPI: PM-Timer IO Port: 0x448
With commit
[0.026874] Normal zone:
1445888 pages used for memmap
[0.026875] Normal zone:
89391104 pages, LIFO batch:63
[2.028450] ACPI: PM-Timer IO Port: 0x448
The root cause is the current memmap defer init doesn't work as expected.
Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node. However, since commit
73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.
E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2. The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's
only one memory section's memmap initialized. That's why more time is
costed at the time.
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]
Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.
Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit
73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Souptick Joarder [Tue, 29 Dec 2020 23:14:34 +0000 (15:14 -0800)]
mm: add prototype for __add_to_page_cache_locked()
Otherwise it causes a gcc warning:
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.
Adding a prototype will silence the warning.
Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 29 Dec 2020 23:14:31 +0000 (15:14 -0800)]
checkpatch: prefer strscpy to strlcpy
Prefer strscpy over the deprecated strlcpy function.
Link: https://lkml.kernel.org/r/19fe91084890e2c16fe56f960de6c570a93fa99b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>