OSDN Git Service
Rakesh Pandit [Mon, 5 Jun 2017 11:43:11 +0000 (14:43 +0300)]
nvme-pci: fix multiple ctrl removal scheduling
Commit
c5f6ce97c1210 tries to address multiple resets but fails as
work_busy doesn't involve any synchronization and can fail. This is
reproducible easily as can be seen by WARNING below which is triggered
with line:
WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)
Allowing multiple resets can result in multiple controller removal as
well if different conditions inside nvme_reset_work fail and which
might deadlock on device_release_driver.
[ 480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0
[ 480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast...
[ 480.327044] btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart..
[ 480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13
[ 480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016
[ 480.327066] Workqueue: nvme nvme_reset_work
[ 480.327067] task:
ffff880498ad8000 task.stack:
ffffc90002218000
[ 480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0
[ 480.327069] RSP: 0018:
ffffc9000221bdb8 EFLAGS:
00010246
[ 480.327070] RAX:
0000000000460000 RBX:
ffff880498a98128 RCX:
dead000000000200
[ 480.327070] RDX:
0000000000000001 RSI:
ffff8804b1028020 RDI:
ffff880498a98128
[ 480.327071] RBP:
ffffc9000221be50 R08:
0000000000000000 R09:
0000000000000000
[ 480.327071] R10:
ffffc90001963ce8 R11:
000000000000020d R12:
ffff880498a98000
[ 480.327072] R13:
ffff880498a53500 R14:
ffff880498a98130 R15:
ffff880498a98128
[ 480.327072] FS:
0000000000000000(0000) GS:
ffff8804c1cc0000(0000) knlGS:
0000000000000000
[ 480.327073] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 480.327074] CR2:
00007ffcf3c37f78 CR3:
0000000001e09000 CR4:
00000000003406e0
[ 480.327074] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 480.327075] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 480.327075] Call Trace:
[ 480.327079] ? __switch_to+0x227/0x400
[ 480.327081] process_one_work+0x18c/0x3a0
[ 480.327082] worker_thread+0x4e/0x3b0
[ 480.327084] kthread+0x109/0x140
[ 480.327085] ? process_one_work+0x3a0/0x3a0
[ 480.327087] ? kthread_park+0x60/0x60
[ 480.327102] ret_from_fork+0x2c/0x40
[ 480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f.....
This patch addresses the problem by using state of controller to
decide whether reset should be queued or not as state change is
synchronizated using controller spinlock. Also cancel_work_sync is
used to make sure remove cancels the reset_work and waits for it to
finish. This patch also changes return value from -ENODEV to more
appropriate -EBUSY if nvme_reset fails to change state.
Fixes:
c5f6ce97c1210 ("nvme: don't schedule multiple resets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Ming Lei [Fri, 2 Jun 2017 08:32:08 +0000 (16:32 +0800)]
nvme: fix hang in remove path
We need to start admin queues too in nvme_kill_queues()
for avoiding hang in remove path[1].
This patch is very similar with
806f026f9b901eaf(nvme: use
blk_mq_start_hw_queues() in nvme_kill_queues()).
[1] hang stack trace
[<
ffffffff813c9716>] blk_execute_rq+0x56/0x80
[<
ffffffff815cb6e9>] __nvme_submit_sync_cmd+0x89/0xf0
[<
ffffffff815ce7be>] nvme_set_features+0x5e/0x90
[<
ffffffff815ce9f6>] nvme_configure_apst+0x166/0x200
[<
ffffffff815cef45>] nvme_set_latency_tolerance+0x35/0x50
[<
ffffffff8157bd11>] apply_constraint+0xb1/0xc0
[<
ffffffff8157cbb4>] dev_pm_qos_constraints_destroy+0xf4/0x1f0
[<
ffffffff8157b44a>] dpm_sysfs_remove+0x2a/0x60
[<
ffffffff8156d951>] device_del+0x101/0x320
[<
ffffffff8156db8a>] device_unregister+0x1a/0x60
[<
ffffffff8156dc4c>] device_destroy+0x3c/0x50
[<
ffffffff815cd295>] nvme_uninit_ctrl+0x45/0xa0
[<
ffffffff815d4858>] nvme_remove+0x78/0x110
[<
ffffffff81452b69>] pci_device_remove+0x39/0xb0
[<
ffffffff81572935>] device_release_driver_internal+0x155/0x210
[<
ffffffff81572a02>] device_release_driver+0x12/0x20
[<
ffffffff815d36fb>] nvme_remove_dead_ctrl_work+0x6b/0x70
[<
ffffffff810bf3bc>] process_one_work+0x18c/0x3a0
[<
ffffffff810bf61e>] worker_thread+0x4e/0x3b0
[<
ffffffff810c5ac9>] kthread+0x109/0x140
[<
ffffffff8185800c>] ret_from_fork+0x2c/0x40
[<
ffffffffffffffff>] 0xffffffffffffffff
Fixes:
c5552fde102fc("nvme: Enable autonomous power state transitions")
Reported-by: Rakesh Pandit <rakesh@tuxera.com>
Tested-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Eric Biggers [Sat, 3 Jun 2017 03:35:51 +0000 (20:35 -0700)]
elevator: fix truncation of icq_cache_name
gcc 7.1 reports the following warning:
block/elevator.c: In function ‘elv_register’:
block/elevator.c:898:5: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
"%s_io_cq", e->elevator_name);
^~~~~~~~~~
block/elevator.c:897:3: note: ‘snprintf’ output between 7 and 22 bytes into a destination of size 21
snprintf(e->icq_cache_name, sizeof(e->icq_cache_name),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s_io_cq", e->elevator_name);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The bug is that the name of the icq_cache is 6 characters longer than
the elevator name, but only ELV_NAME_MAX + 5 characters were reserved
for it --- so in the case of a maximum-length elevator name, the 'q'
character in "_io_cq" would be truncated by snprintf(). Fix it by
reserving ELV_NAME_MAX + 6 characters instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Ming Lei [Tue, 6 Jun 2017 15:22:00 +0000 (23:22 +0800)]
blk-mq: fix direct issue
If queue is stopped, we shouldn't dispatch request into driver and
hardware, unfortunately the check is removed in
bd166ef183c2(blk-mq-sched:
add framework for MQ capable IO schedulers).
This patch fixes the issue by moving the check back into
__blk_mq_try_issue_directly().
This patch fixes request use-after-free[1][2] during canceling requets
of NVMe in nvme_dev_disable(), which can be triggered easily during
NVMe reset & remove test.
[1] oops kernel log when CONFIG_BLK_DEV_INTEGRITY is on
[ 103.412969] BUG: unable to handle kernel NULL pointer dereference at
000000000000000a
[ 103.412980] IP: bio_integrity_advance+0x48/0xf0
[ 103.412981] PGD
275a88067
[ 103.412981] P4D
275a88067
[ 103.412982] PUD
276c43067
[ 103.412983] PMD 0
[ 103.412984]
[ 103.412986] Oops: 0000 [#1] SMP
[ 103.412989] Modules linked in: vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd cryptd ipmi_ssif iTCO_wdt iTCO_vendor_support mxm_wmi glue_helper dcdbas ipmi_si mei_me pcspkr mei sg ipmi_devintf lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel nvme ahci nvme_core libahci libata tg3 i2c_core megaraid_sas ptp pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 103.413035] CPU: 0 PID: 102 Comm: kworker/0:2 Not tainted 4.11.0+ #1
[ 103.413036] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016
[ 103.413041] Workqueue: events nvme_remove_dead_ctrl_work [nvme]
[ 103.413043] task:
ffff9cc8775c8000 task.stack:
ffffc033c252c000
[ 103.413045] RIP: 0010:bio_integrity_advance+0x48/0xf0
[ 103.413046] RSP: 0018:
ffffc033c252fc10 EFLAGS:
00010202
[ 103.413048] RAX:
0000000000000000 RBX:
ffff9cc8720a8cc0 RCX:
ffff9cca72958240
[ 103.413049] RDX:
ffff9cca72958000 RSI:
0000000000000008 RDI:
ffff9cc872537f00
[ 103.413049] RBP:
ffffc033c252fc28 R08:
0000000000000000 R09:
ffffffffb963a0d5
[ 103.413050] R10:
000000000000063e R11:
0000000000000000 R12:
ffff9cc8720a8d18
[ 103.413051] R13:
0000000000001000 R14:
ffff9cc872682e00 R15:
00000000fffffffb
[ 103.413053] FS:
0000000000000000(0000) GS:
ffff9cc877c00000(0000) knlGS:
0000000000000000
[ 103.413054] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 103.413055] CR2:
000000000000000a CR3:
0000000276c41000 CR4:
00000000001406f0
[ 103.413056] Call Trace:
[ 103.413063] bio_advance+0x2a/0xe0
[ 103.413067] blk_update_request+0x76/0x330
[ 103.413072] blk_mq_end_request+0x1a/0x70
[ 103.413074] blk_mq_dispatch_rq_list+0x370/0x410
[ 103.413076] ? blk_mq_flush_busy_ctxs+0x94/0xe0
[ 103.413080] blk_mq_sched_dispatch_requests+0x173/0x1a0
[ 103.413083] __blk_mq_run_hw_queue+0x8e/0xa0
[ 103.413085] __blk_mq_delay_run_hw_queue+0x9d/0xa0
[ 103.413088] blk_mq_start_hw_queue+0x17/0x20
[ 103.413090] blk_mq_start_hw_queues+0x32/0x50
[ 103.413095] nvme_kill_queues+0x54/0x80 [nvme_core]
[ 103.413097] nvme_remove_dead_ctrl_work+0x1f/0x40 [nvme]
[ 103.413103] process_one_work+0x149/0x360
[ 103.413105] worker_thread+0x4d/0x3c0
[ 103.413109] kthread+0x109/0x140
[ 103.413111] ? rescuer_thread+0x380/0x380
[ 103.413113] ? kthread_park+0x60/0x60
[ 103.413120] ret_from_fork+0x2c/0x40
[ 103.413121] Code: 08 4c 8b 63 50 48 8b 80 80 00 00 00 48 8b 90 d0 03 00 00 31 c0 48 83 ba 40 02 00 00 00 48 8d 8a 40 02 00 00 48 0f 45 c1 c1 ee 09 <0f> b6 48 0a 0f b6 40 09 41 89 f5 83 e9 09 41 d3 ed 44 0f af e8
[ 103.413145] RIP: bio_integrity_advance+0x48/0xf0 RSP:
ffffc033c252fc10
[ 103.413146] CR2:
000000000000000a
[ 103.413157] ---[ end trace
cd6875d16eb5a11e ]---
[ 103.455368] Kernel panic - not syncing: Fatal exception
[ 103.459826] Kernel Offset: 0x37600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 103.850916] ---[ end Kernel panic - not syncing: Fatal exception
[ 103.857637] sched: Unexpected reschedule of offline CPU#1!
[ 103.863762] ------------[ cut here ]------------
[2] kernel hang in blk_mq_freeze_queue_wait() when CONFIG_BLK_DEV_INTEGRITY is off
[ 247.129825] INFO: task nvme-test:1772 blocked for more than 120 seconds.
[ 247.137311] Not tainted 4.12.0-rc2.upstream+ #4
[ 247.142954] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 247.151704] Call Trace:
[ 247.154445] __schedule+0x28a/0x880
[ 247.158341] schedule+0x36/0x80
[ 247.161850] blk_mq_freeze_queue_wait+0x4b/0xb0
[ 247.166913] ? remove_wait_queue+0x60/0x60
[ 247.171485] blk_freeze_queue+0x1a/0x20
[ 247.175770] blk_cleanup_queue+0x7f/0x140
[ 247.180252] nvme_ns_remove+0xa3/0xb0 [nvme_core]
[ 247.185503] nvme_remove_namespaces+0x32/0x50 [nvme_core]
[ 247.191532] nvme_uninit_ctrl+0x2d/0xa0 [nvme_core]
[ 247.196977] nvme_remove+0x70/0x110 [nvme]
[ 247.201545] pci_device_remove+0x39/0xc0
[ 247.205927] device_release_driver_internal+0x141/0x200
[ 247.211761] device_release_driver+0x12/0x20
[ 247.216531] pci_stop_bus_device+0x8c/0xa0
[ 247.221104] pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 247.227420] remove_store+0x7c/0x90
[ 247.231320] dev_attr_store+0x18/0x30
[ 247.235409] sysfs_kf_write+0x3a/0x50
[ 247.239497] kernfs_fop_write+0xff/0x180
[ 247.243867] __vfs_write+0x37/0x160
[ 247.247757] ? selinux_file_permission+0xe5/0x120
[ 247.253011] ? security_file_permission+0x3b/0xc0
[ 247.258260] vfs_write+0xb2/0x1b0
[ 247.261964] ? syscall_trace_enter+0x1d0/0x2b0
[ 247.266924] SyS_write+0x55/0xc0
[ 247.270540] do_syscall_64+0x67/0x150
[ 247.274636] entry_SYSCALL64_slow_path+0x25/0x25
[ 247.279794] RIP: 0033:0x7f5c96740840
[ 247.283785] RSP: 002b:
00007ffd00e87ee8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 247.292238] RAX:
ffffffffffffffda RBX:
0000000000000002 RCX:
00007f5c96740840
[ 247.300194] RDX:
0000000000000002 RSI:
00007f5c97060000 RDI:
0000000000000001
[ 247.308159] RBP:
00007f5c97060000 R08:
000000000000000a R09:
00007f5c97059740
[ 247.316123] R10:
0000000000000001 R11:
0000000000000246 R12:
00007f5c96a14400
[ 247.324087] R13:
0000000000000002 R14:
0000000000000001 R15:
0000000000000000
[ 370.016340] INFO: task nvme-test:1772 blocked for more than 120 seconds.
Fixes:
12d70958a2e8(blk-mq: don't fail allocating driver tag for stopped hw queue)
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Ming Lei [Tue, 6 Jun 2017 15:21:59 +0000 (23:21 +0800)]
blk-mq: pass correct hctx to blk_mq_try_issue_directly
When direct issue is done on request picked up from plug list,
the hctx need to be updated with the actual hw queue, otherwise
wrong hctx is used and may hurt performance, especially when
wrong SRCU readlock is acquired/released
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Dmitry Monakhov [Wed, 10 May 2017 15:20:44 +0000 (19:20 +0400)]
bio-integrity: Do not allocate integrity context for bio w/o data
If bio has no data, such as ones from blkdev_issue_flush(),
then we have nothing to protect.
This patch prevent bugon like follows:
kfree_debugcheck: out of range ptr ac1fa1d106742a5ah
kernel BUG at mm/slab.c:2773!
invalid opcode: 0000 [#1] SMP
Modules linked in: bcache
CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W
4.11.0-rc4-ext4-00041-g2ef0043-dirty #43
Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014
task:
ffff880137786440 task.stack:
ffffc90000ba8000
RIP: 0010:kfree_debugcheck+0x25/0x2a
RSP: 0018:
ffffc90000babde0 EFLAGS:
00010082
RAX:
0000000000000034 RBX:
ac1fa1d106742a5a RCX:
0000000000000007
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff88013f3ccb40
RBP:
ffffc90000babde8 R08:
0000000000000000 R09:
0000000000000000
R10:
00000000fcb76420 R11:
00000000725172ed R12:
0000000000000282
R13:
ffffffff8150e766 R14:
ffff88013a145e00 R15:
0000000000000001
FS:
00007fb09384bf40(0000) GS:
ffff88013f200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fd0172f9e40 CR3:
0000000137fa9000 CR4:
00000000000006f0
Call Trace:
kfree+0xc8/0x1b3
bio_integrity_free+0xc3/0x16b
bio_free+0x25/0x66
bio_put+0x14/0x26
blkdev_issue_flush+0x7a/0x85
blkdev_fsync+0x35/0x42
vfs_fsync_range+0x8e/0x9f
vfs_fsync+0x1c/0x1e
do_fsync+0x31/0x4a
SyS_fsync+0x10/0x14
entry_SYSCALL_64_fastpath+0x1f/0xc2
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Fri, 2 Jun 2017 19:29:03 +0000 (12:29 -0700)]
Merge tag 'xfs-4.12-fixes-3' of git://git./fs/xfs/xfs-linux
Pull XFS fix from Darrick Wong:
"I've one more bugfix for you for 4.12-rc4: Fix an unmount hang due to
a race in io buffer accounting"
* tag 'xfs-4.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: use ->b_state to fix buffer I/O accounting release race
Linus Torvalds [Fri, 2 Jun 2017 19:06:27 +0000 (12:06 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"ACPI-related fixes for arm64:
- GICC MADT entry validity check fix
- Skip IRQ registration with pmu=off in an ACPI guest
- struct acpi_pci_root_ops freeing on error path"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation
drivers/perf: arm_pmu_acpi: avoid perf IRQ init when guest PMU is off
ARM64: PCI: Fix struct acpi_pci_root_ops allocation failure path
Linus Torvalds [Fri, 2 Jun 2017 19:03:07 +0000 (12:03 -0700)]
Merge tag 'ceph-for-4.12-rc4' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A small fix for rbd FALLOC_FL_ZERO_RANGE/PUNCH_HOLE handling breakage
introduced in -rc1"
* tag 'ceph-for-4.12-rc4' of git://github.com/ceph/ceph-client:
rbd: implement REQ_OP_WRITE_ZEROES
Linus Torvalds [Fri, 2 Jun 2017 18:50:37 +0000 (11:50 -0700)]
Merge tag 'for-4.12/dm-fixes-3' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a DM verity fix for a mode when no salt is used
- a fix to DM to account for the possibility that PREFLUSH or FUA are
used without the SYNC flag if the underlying storage doesn't have a
volatile write-cache
- a DM ioctl memory allocation flag fix to use __GFP_HIGH to allow
emergency forward progress (by using memory reserves as last resort)
- a small DM integrity cleanup to use kvmalloc() instead of duplicating
the same
* tag 'for-4.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: make flush bios explicitly sync
dm ioctl: restore __GFP_HIGH in copy_params()
dm integrity: use kvmalloc() instead of dm_integrity_kvmalloc()
dm verity: fix no salt use case
Linus Torvalds [Fri, 2 Jun 2017 18:47:24 +0000 (11:47 -0700)]
Merge tag 'md/4.12-rc4' of git://git./linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
"Several patches for MD. One notable is making flush bios sync, others
fix small issues"
* tag 'md/4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md: Make flush bios explicitely sync
md: report sector of stripes with check mismatches
md: uuid debug statement now in processor byte order.
md-cluster: fix potential lock issue in add_new_disk
Linus Torvalds [Fri, 2 Jun 2017 18:44:46 +0000 (11:44 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes that should go into the next -rc. This contains:
- A use-after-free in the request_list exit for the legacy IO path,
from Bart.
- A fix for CFQ, fixing a recent regression with the conversion to
higher resolution timing for iops mode. From Hou Tao.
- A single fix for nbd, split in two patches, fixing a leak of a data
structure.
- A regression fix from Keith, ensuring that callers of
blk_mq_update_nr_hw_queues() hold the right lock"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Avoid that blk_exit_rl() triggers a use-after-free
cfq-iosched: fix the delay of cfq_group's vdisktime under iops mode
blk-mq: Take tagset lock when updating hw queues
nbd: don't leak nbd_config
nbd: nbd_reset() call in nbd_dev_add() is redundant
Linus Torvalds [Fri, 2 Jun 2017 18:32:38 +0000 (11:32 -0700)]
Merge tag 'drm-dp-quirk-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm displayport quirk support:
"DP quirk for usb c dongles.
As mentioned I have a separate request for fixing a regression, but
also keeping the broken hw working, for certain USB-C DP adapters they
require a minimised n/m parameters, but an attempt to do this
generically has failed, we need to quirk these specific adapters.
However doing it generically regressed some eDP panels.
This pull adds the infrastructure and a quirk for the adapter"
* tag 'drm-dp-quirk-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Detect USB-C specific dongles before reducing M and N
drm/dp: start a DPCD based DP sink/branch device quirk database
drm/i915: use drm DP helper to read DPCD desc
drm/dp: add helper for reading DP sink/branch device desc from DPCD
Linus Torvalds [Fri, 2 Jun 2017 16:40:47 +0000 (09:40 -0700)]
Merge tag 'sound-4.12-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains the fixes for a few reported regression for HD-audio and
USB-audio. All small, trivial, and boring"
* tag 'sound-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix applying MSI dual-codec mobo quirk
ALSA: usb: Avoid VLA in mixer_us16x08.c
ALSA: usb: Fix a typo in Tascam US-16x08 mixer element
Revert "ALSA: usb-audio: purge needless variable length array"
Linus Torvalds [Fri, 2 Jun 2017 16:26:42 +0000 (09:26 -0700)]
Merge tag 'dmaengine-fix-4.12-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Here is the dmaengine fixes request for 4.12. Fixes bunch of issues in
the driver, npthing exciting though..
- mv_xor_v2 driver fixes for handling descriptors, tx_submit
implementation, removing interrupt coalescing and setting DMA mask
properly
- fix usb-dmac DMAOR AE bit definition
- fix ep93xx start buffer from BASE0 and not drain the transfers in
terminate_all
- fix rcar-dmac to use right descriptor pointer for residue
calculation
- pl330 fix warn for irq freeup"
* tag 'dmaengine-fix-4.12-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: pl330: fix warning in pl330_remove
rcar-dmac: fixup descriptor pointer for descriptor mode
dmaengine: ep93xx: Don't drain the transfers in terminate_all()
dmaengine: ep93xx: Always start from BASE0
dmaengine: usb-dmac: Fix DMAOR AE bit definition
dmaengine: mv_xor_v2: set DMA mask to 40 bits
dmaengine: mv_xor_v2: remove interrupt coalescing
dmaengine: mv_xor_v2: fix tx_submit() implementation
dmaengine: mv_xor_v2: enable XOR engine after its configuration
dmaengine: mv_xor_v2: do not use descriptors not acked by async_tx
dmaengine: mv_xor_v2: properly handle wrapping in the array of HW descriptors
dmaengine: mv_xor_v2: handle mv_xor_v2_prep_sw_desc() error properly
Linus Torvalds [Fri, 2 Jun 2017 16:23:56 +0000 (09:23 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- corner-case oops fixes for Asus and Wacom drivers from Carlo Caione
and Jason Gerecke
- power management fix (reported on SIS0817 touchscreen) for i2c-hid
devices from Hans de Goede
- device-id-specific fixes and quirks from Hans de Goede, Diego Elio
Pettenò and Che-Liang Chiou
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: asus: Stop underlying hardware on remove
HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices
HID: asus: Add support for T100 keyboard
HID: elecom: extend to fix the descriptor for DEFT trackballs
HID: magicmouse: Set multi-touch keybits for Magic Mouse
HID: wacom: Have wacom_tpc_irq guard against possible NULL dereference
Linus Torvalds [Fri, 2 Jun 2017 15:59:17 +0000 (08:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching
Pull livepatching fix from Jiri Kosina:
"Kconfig dependency fix for livepatching infrastructure from Miroslav
Benes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Make livepatch dependent on !TRIM_UNUSED_KSYMS
Linus Torvalds [Fri, 2 Jun 2017 15:53:42 +0000 (08:53 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- revert a broken PAT commit that broke a number of systems
- fix two preemptability warnings/bugs that can trigger under certain
circumstances, in the debug code and in the microcode loader"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/PAT: Fix Xorg regression on CPUs that don't support PAT"
x86/debug/32: Convert a smp_processor_id() call to raw to avoid DEBUG_PREEMPT warning
x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug
Linus Torvalds [Fri, 2 Jun 2017 15:51:53 +0000 (08:51 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc fixes:
- three boot crash fixes for uncommon configurations
- silence a boot warning under virtualization
- plus a GCC 7 related (harmless) build warning fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/bgrt: Skip efi_bgrt_init() in case of non-EFI boot
x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled
x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map
efi: Remove duplicate 'const' specifiers
efi: Don't issue error message when booted under Xen
Lorenzo Pieralisi [Fri, 26 May 2017 16:40:02 +0000 (17:40 +0100)]
ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation
The BAD_MADT_GICC_ENTRY() macro checks if a GICC MADT entry passes
muster from an ACPI specification standpoint. Current macro detects the
MADT GICC entry length through ACPI firmware version (it changed from 76
to 80 bytes in the transition from ACPI 5.1 to ACPI 6.0 specification)
but always uses (erroneously) the ACPICA (latest) struct (ie struct
acpi_madt_generic_interrupt - that is 80-bytes long) length to check if
the current GICC entry memory record exceeds the MADT table end in
memory as defined by the MADT table header itself, which may result in
false negatives depending on the ACPI firmware version and how the MADT
entries are laid out in memory (ie on ACPI 5.1 firmware MADT GICC
entries are 76 bytes long, so by adding 80 to a GICC entry start address
in memory the resulting address may well be past the actual MADT end,
triggering a false negative).
Fix the BAD_MADT_GICC_ENTRY() macro by reshuffling the condition checks
and update them to always use the firmware version specific MADT GICC
entry length in order to carry out boundary checks.
Fixes:
b6cfb277378e ("ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro")
Reported-by: Julien Grall <julien.grall@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Al Stone <ahs3@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Carlo Caione [Tue, 30 May 2017 20:39:46 +0000 (22:39 +0200)]
HID: asus: Stop underlying hardware on remove
We are missing a call to hid_hw_stop() on the remove hook.
Among other things this is causing an Oops when (re-)starting GNOME /
upowerd / ... after the module has been already rmmod-ed.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jean-Philippe Brucker [Thu, 1 Jun 2017 18:22:01 +0000 (19:22 +0100)]
dmaengine: pl330: fix warning in pl330_remove
When removing a device with less than 9 IRQs (AMBA_NR_IRQS), we'll get a
big WARN_ON from devres.c because pl330_remove calls devm_free_irqs for
unallocated irqs. Similarly to pl330_probe, check that IRQ number is
present before calling devm_free_irq.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Dave Airlie [Fri, 2 Jun 2017 02:57:32 +0000 (12:57 +1000)]
Merge tag 'topic/dp-quirks-2017-05-31' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
DP sink specific quirks
* tag 'topic/dp-quirks-2017-05-31' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Detect USB-C specific dongles before reducing M and N
drm/dp: start a DPCD based DP sink/branch device quirk database
drm/i915: use drm DP helper to read DPCD desc
drm/dp: add helper for reading DP sink/branch device desc from DPCD
Linus Torvalds [Thu, 1 Jun 2017 23:24:48 +0000 (16:24 -0700)]
Merge tag 'nfsd-4.12-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Revert patch accidentally included in the merge window pull request,
and fix a crash that was likely a result of buggy client behavior"
* tag 'nfsd-4.12-1' of git://linux-nfs.org/~bfields/linux:
nfsd4: fix null dereference on replay
nfsd: Revert "nfsd: check for oversized NFSv2/v3 arguments"
Linus Torvalds [Thu, 1 Jun 2017 23:17:42 +0000 (16:17 -0700)]
Merge tag 'gcc-plugins-v4.12-rc4' of git://git./linux/kernel/git/kees/linux
Pull gcc-plugin prepwork from Kees Cook:
"Use designated initializers for mtk-vcodec, powerplay, amdgpu, and
sgi-xp. Use ERR_CAST() to avoid cross-structure cast in ocf2, ntfs,
and NFS.
Christoph Hellwig recommended that I send these fixes now, rather than
waiting for the v4.13 merge window. These are all initializer and cast
fixes needed for the future randstruct plugin that haven't been picked
up by the respective maintainers"
* tag 'gcc-plugins-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mtk-vcodec: Use designated initializers
drm/amd/powerplay: Use designated initializers
drm/amdgpu: Use designated initializers
sgi-xp: Use designated initializers
ocfs2: Use ERR_CAST() to avoid cross-structure cast
ntfs: Use ERR_CAST() to avoid cross-structure cast
NFS: Use ERR_CAST() to avoid cross-structure cast
Bart Van Assche [Wed, 31 May 2017 21:43:45 +0000 (14:43 -0700)]
block: Avoid that blk_exit_rl() triggers a use-after-free
Since the introduction of .init_rq_fn() and .exit_rq_fn() it is
essential that the memory allocated for struct request_queue
stays around until all blk_exit_rl() calls have finished. Hence
make blk_init_rl() take a reference on struct request_queue.
This patch fixes the following crash:
general protection fault: 0000 [#2] SMP
CPU: 3 PID: 28 Comm: ksoftirqd/3 Tainted: G D 4.12.0-rc2-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
task:
ffff88013a108040 task.stack:
ffffc9000071c000
RIP: 0010:free_request_size+0x1a/0x30
RSP: 0018:
ffffc9000071fd38 EFLAGS:
00010202
RAX:
6b6b6b6b6b6b6b6b RBX:
ffff880067362a88 RCX:
0000000000000003
RDX:
ffff880067464178 RSI:
ffff880067362a88 RDI:
ffff880135ea4418
RBP:
ffffc9000071fd40 R08:
0000000000000000 R09:
0000000100180009
R10:
ffffc9000071fd38 R11:
ffffffff81110800 R12:
ffff88006752d3d8
R13:
ffff88006752d3d8 R14:
ffff88013a108040 R15:
000000000000000a
FS:
0000000000000000(0000) GS:
ffff88013fd80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fa8ec1edb00 CR3:
0000000138ee8000 CR4:
00000000001406e0
Call Trace:
mempool_destroy.part.10+0x21/0x40
mempool_destroy+0xe/0x10
blk_exit_rl+0x12/0x20
blkg_free+0x4d/0xa0
__blkg_release_rcu+0x59/0x170
rcu_process_callbacks+0x260/0x4e0
__do_softirq+0x116/0x250
smpboot_thread_fn+0x123/0x1e0
kthread+0x109/0x140
ret_from_fork+0x31/0x40
Fixes: commit
e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Thu, 1 Jun 2017 17:48:09 +0000 (10:48 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Many small x86 bug fixes: SVM segment registers access rights, nested
VMX, preempt notifiers, LAPIC virtual wire mode, NMI injection"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix nmi injection failure when vcpu got blocked
KVM: SVM: do not zero out segment attributes if segment is unusable or not present
KVM: SVM: ignore type when setting segment registers
KVM: nVMX: fix nested_vmx_check_vmptr failure paths under debugging
KVM: x86: Fix virtual wire mode
KVM: nVMX: Fix handling of lmsw instruction
KVM: X86: Fix preempt the preemption timer cancel
Linus Torvalds [Thu, 1 Jun 2017 17:45:27 +0000 (10:45 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull Reiserfs and GFS2 fixes from Jan Kara:
"Fixes to GFS2 & Reiserfs for the fallout of the recent WRITE_FUA
cleanup from Christoph.
Fixes for other filesystems were already merged by respective
maintainers."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: Make flush bios explicitely sync
gfs2: Make flush bios explicitely sync
Linus Torvalds [Thu, 1 Jun 2017 17:40:41 +0000 (10:40 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target-pending fixes for v4.12-rc4:
- ibmviscsis ABORT_TASK handling fixes that missed the v4.12 merge
window. (Bryant Ly and Michael Cyr)
- Re-add a target-core check enforcing WRITE overflow reject that was
relaxed in v4.3, to avoid unsupported iscsi-target immediate data
overflow. (nab)
- Fix a target-core-user OOPs during device removal. (MNC + Bryant
Ly)
- Fix a long standing iscsi-target potential issue where kthread exit
did not wait for kthread_should_stop(). (Jiang Yi)
- Fix a iscsi-target v3.12.y regression OOPs involving initial login
PDU processing during asynchronous TCP connection close. (MNC +
nab)
This is a little larger than usual for an -rc4, primarily due to the
iscsi-target v3.12.y regression OOPs bug-fix.
However, it's an important patch as MNC + Hannes where both able to
trigger it using a reduced iscsi initiator login timeout combined with
a backend taking a long time to complete I/Os during iscsi login
driven session reinstatement"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Always wait for kthread_should_stop() before kthread exit
iscsi-target: Fix initial login PDU asynchronous socket close OOPs
tcmu: fix crash during device removal
target: Re-add check to reject control WRITEs with overflow data
ibmvscsis: Fix the incorrect req_lim_delta
ibmvscsis: Clear left-over abort_cmd pointers
Ingo Molnar [Thu, 1 Jun 2017 13:52:23 +0000 (15:52 +0200)]
Revert "x86/PAT: Fix Xorg regression on CPUs that don't support PAT"
This reverts commit
cbed27cdf0e3f7ea3b2259e86b9e34df02be3fe4.
As Andy Lutomirski observed:
"I think this patch is bogus. pat_enabled() sure looks like it's
supposed to return true if PAT is *enabled*, and these days PAT is
'enabled' even if there's no HW PAT support."
Reported-by: Bernhard Held <berny156@gmx.de>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: stable@vger.kernel.org # v4.2+
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ZhuangYanying [Fri, 26 May 2017 05:16:48 +0000 (13:16 +0800)]
KVM: x86: Fix nmi injection failure when vcpu got blocked
When spin_lock_irqsave() deadlock occurs inside the guest, vcpu threads,
other than the lock-holding one, would enter into S state because of
pvspinlock. Then inject NMI via libvirt API "inject-nmi", the NMI could
not be injected into vm.
The reason is:
1 It sets nmi_queued to 1 when calling ioctl KVM_NMI in qemu, and sets
cpu->kvm_vcpu_dirty to true in do_inject_external_nmi() meanwhile.
2 It sets nmi_queued to 0 in process_nmi(), before entering guest, because
cpu->kvm_vcpu_dirty is true.
It's not enough just to check nmi_queued to decide whether to stay in
vcpu_block() or not. NMI should be injected immediately at any situation.
Add checking nmi_pending, and testing KVM_REQ_NMI replaces nmi_queued
in vm_vcpu_has_events().
Do the same change for SMIs.
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Pen [Thu, 1 Jun 2017 08:55:03 +0000 (10:55 +0200)]
KVM: SVM: do not zero out segment attributes if segment is unusable or not present
This is a fix for the problem [1], where VMCB.CPL was set to 0 and interrupt
was taken on userspace stack. The root cause lies in the specific AMD CPU
behaviour which manifests itself as unusable segment attributes on SYSRET.
The corresponding work around for the kernel is the following:
61f01dd941ba ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue")
In other turn virtualization side treated unusable segment incorrectly and
restored CPL from SS attributes, which were zeroed out few lines above.
In current patch it is assured only that P bit is cleared in VMCB.save state
and segment attributes are not zeroed out if segment is not presented or is
unusable, therefore CPL can be safely restored from DPL field.
This is only one part of the fix, since QEMU side should be fixed accordingly
not to zero out attributes on its side. Corresponding patch will follow.
[1] Message id: CAJrWOzD6Xq==b-zYCDdFLgSRMPM-NkNuTSDFEtX=7MreT45i7Q@mail.gmail.com
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Mikhail Sennikovskii <mikhail.sennikovskii@profitbricks.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Takashi Iwai [Thu, 1 Jun 2017 07:35:30 +0000 (09:35 +0200)]
ALSA: hda - Fix applying MSI dual-codec mobo quirk
The previous commit [
63691587f7b0: ALSA: hda - Apply dual-codec quirk
for MSI Z270-Gaming mobo] attempted to apply the existing dual-codec
quirk for a MSI mobo. But it turned out that this isn't applied
properly due to the MSI-vendor quirk before this entry. I overlooked
such two MSI entries just because they were put in the wrong position,
although we have a list ordered by PCI SSID numbers.
This patch fixes it by rearranging the unordered entries.
Fixes:
63691587f7b0 ("ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo")
Reported-by: Rudolf Schmidt <info@rudolfschmidt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Thu, 1 Jun 2017 04:53:49 +0000 (21:53 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is the main set of fixes for rc4, one amdgpu fix, some exynos
regression fixes, some msm fixes and some i915 and GVT fixes.
I've got a second regression fix for some DP chips that might be a
bit large, but I think we'd like to land it now, I'll send it along
tomorrow, once you are happy with this set"
* tag 'drm-fixes-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux: (24 commits)
drm/amdgpu: Program ring for vce instance 1 at its register space
drm/exynos: clean up description of exynos_drm_crtc
drm/exynos: dsi: Remove bridge node reference in removal
drm/exynos: dsi: Fix the parse_dt function
drm/exynos: Merge pre/postclose hooks
drm/msm: Fix the check for the command size
drm/msm: Take the mutex before calling msm_gem_new_impl
drm/msm: for array in-fences, check if all backing fences are from our own context before waiting
drm/msm: constify irq_domain_ops
drm/msm/mdp5: release hwpipe(s) for unused planes
drm/msm: Reuse dma_fence_release.
drm/msm: Expose our reservation object when exporting a dmabuf.
drm/msm/gpu: check legacy clk names in get_clocks()
drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state()
drm/msm: select PM_OPP
drm/i915: Stop pretending to mask/unmask LPE audio interrupts
drm/i915/selftests: Silence compiler warning in igt_ctx_exec
Revert "drm/i915: Restore lost "Initialized i915" welcome message"
drm/i915/gvt: clean up unsubmited workloads before destroying kmem cache
drm/i915/gvt: Disable compression workaround for Gen9
...
Dave Airlie [Thu, 1 Jun 2017 02:07:48 +0000 (12:07 +1000)]
Merge tag 'exynos-drm-fixes-for-v4.12' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
- Fix a regression to description of exynos_drm_crtc
- Remove preclose hook of Exynos
. This was a exynos change of the patch series[1] merged already.
- Fix one dt broken issue
- Make sure to release bridge_node of Exynos MIPI-DSI driver.
[1] https://lists.freedesktop.org/archives/dri-devel/2017-March/135111.html
* tag 'exynos-drm-fixes-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: clean up description of exynos_drm_crtc
drm/exynos: dsi: Remove bridge node reference in removal
drm/exynos: dsi: Fix the parse_dt function
drm/exynos: Merge pre/postclose hooks
Dave Airlie [Thu, 1 Jun 2017 02:07:18 +0000 (12:07 +1000)]
Merge branch 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
* 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: Program ring for vce instance 1 at its register space
Dave Airlie [Thu, 1 Jun 2017 02:06:34 +0000 (12:06 +1000)]
Merge branch 'msm-fixes-4.12-rc4' of git://people.freedesktop.org/~robclark/linux into drm-fixes
a few fixes for 4.12..
* 'msm-fixes-4.12-rc4' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Fix the check for the command size
drm/msm: Take the mutex before calling msm_gem_new_impl
drm/msm: for array in-fences, check if all backing fences are from our own context before waiting
drm/msm: constify irq_domain_ops
drm/msm/mdp5: release hwpipe(s) for unused planes
drm/msm: Reuse dma_fence_release.
drm/msm: Expose our reservation object when exporting a dmabuf.
drm/msm/gpu: check legacy clk names in get_clocks()
drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state()
drm/msm: select PM_OPP
Dave Airlie [Thu, 1 Jun 2017 01:53:34 +0000 (11:53 +1000)]
Merge tag 'drm-intel-fixes-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.12-rc4
* tag 'drm-intel-fixes-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Stop pretending to mask/unmask LPE audio interrupts
drm/i915/selftests: Silence compiler warning in igt_ctx_exec
Revert "drm/i915: Restore lost "Initialized i915" welcome message"
drm/i915/gvt: clean up unsubmited workloads before destroying kmem cache
drm/i915/gvt: Disable compression workaround for Gen9
drm/i915: set initialised only when init_context callback is NULL
drm/i915: Fix new -Wint-in-bool-context gcc compiler warning
drm/i915: use vma->size for appgtt allocate_va_range
drm/i915: Do not sync RCU during shrinking
Jiang Yi [Tue, 16 May 2017 09:57:55 +0000 (17:57 +0800)]
iscsi-target: Always wait for kthread_should_stop() before kthread exit
There are three timing problems in the kthread usages of iscsi_target_mod:
- np_thread of struct iscsi_np
- rx_thread and tx_thread of struct iscsi_conn
In iscsit_close_connection(), it calls
send_sig(SIGINT, conn->tx_thread, 1);
kthread_stop(conn->tx_thread);
In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().
So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.
This is invalid according to the documentation of kthread_stop().
(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
early iscsi_target_rx_thread failure case - nab)
Signed-off-by: Jiang Yi <jiangyilism@gmail.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 25 May 2017 04:47:09 +0000 (21:47 -0700)]
iscsi-target: Fix initial login PDU asynchronous socket close OOPs
This patch fixes a OOPs originally introduced by:
commit
bb048357dad6d604520c91586334c9c230366a14
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Thu Sep 5 14:54:04 2013 -0700
iscsi-target: Add sk->sk_state_change to cleanup after TCP failure
which would trigger a NULL pointer dereference when a TCP connection
was closed asynchronously via iscsi_target_sk_state_change(), but only
when the initial PDU processing in iscsi_target_do_login() from iscsi_np
process context was blocked waiting for backend I/O to complete.
To address this issue, this patch makes the following changes.
First, it introduces some common helper functions used for checking
socket closing state, checking login_flags, and atomically checking
socket closing state + setting login_flags.
Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP
connection has dropped via iscsi_target_sk_state_change(), but the
initial PDU processing within iscsi_target_do_login() in iscsi_np
context is still running. For this case, it sets LOGIN_FLAGS_CLOSED,
but doesn't invoke schedule_delayed_work().
The original NULL pointer dereference case reported by MNC is now handled
by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before
transitioning to FFP to determine when the socket has already closed,
or iscsi_target_start_negotiation() if the login needs to exchange
more PDUs (eg: iscsi_target_do_login returned 0) but the socket has
closed. For both of these cases, the cleanup up of remaining connection
resources will occur in iscsi_target_start_negotiation() from iscsi_np
process context once the failure is detected.
Finally, to handle to case where iscsi_target_sk_state_change() is
called after the initial PDU procesing is complete, it now invokes
conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once
existing iscsi_target_sk_check_close() checks detect connection failure.
For this case, the cleanup of remaining connection resources will occur
in iscsi_target_do_login_rx() from delayed workqueue process context
once the failure is detected.
Reported-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Reported-by: Hannes Reinecke <hare@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Varun Prakash <varun@chelsio.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Leo Liu [Mon, 29 May 2017 17:13:59 +0000 (13:13 -0400)]
drm/amdgpu: Program ring for vce instance 1 at its register space
We need program ring buffer on instance 1 register space domain,
when only if instance 1 available, with two instances or instance 0,
and we need only program instance 0 regsiter space domain for ring.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jan Kara [Wed, 31 May 2017 07:44:33 +0000 (09:44 +0200)]
md: Make flush bios explicitely sync
Commit
b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions. generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions
Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.
CC: linux-raid@vger.kernel.org
CC: Shaohua Li <shli@kernel.org>
Fixes:
b685d3d65ac791406e0dfd8779cc9b3707fea5a3
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shaohua Li <shli@fb.com>
Linus Torvalds [Wed, 31 May 2017 15:29:02 +0000 (08:29 -0700)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix regressions:
- missing CONFIG_EXPORTFS dependency
- failure if upper fs doesn't support xattr
- bad error cleanup
This also adds the concept of "impure" directories complementing the
"origin" marking introduced in -rc1. Together they enable getting
consistent st_ino and d_ino for directory listings.
And there's a bug fix and a cleanup as well"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: filter trusted xattr for non-admin
ovl: mark upper merge dir with type origin entries "impure"
ovl: mark upper dir with type origin entries "impure"
ovl: remove unused arg from ovl_lookup_temp()
ovl: handle rename when upper doesn't support xattr
ovl: don't fail copy-up if upper doesn't support xattr
ovl: check on mount time if upper fs supports setting xattr
ovl: fix creds leak in copy up error path
ovl: select EXPORTFS
Hou Tao [Wed, 1 Mar 2017 01:02:33 +0000 (09:02 +0800)]
cfq-iosched: fix the delay of cfq_group's vdisktime under iops mode
When adding a cfq_group into the cfq service tree, we use CFQ_IDLE_DELAY
as the delay of cfq_group's vdisktime if there have been other cfq_groups
already.
When cfq is under iops mode, commit
9a7f38c42c2b ("cfq-iosched: Convert
from jiffies to nanoseconds") could result in a large iops delay and
lead to an abnormal io schedule delay for the added cfq_group. To fix
it, we just need to revert to the old CFQ_IDLE_DELAY value: HZ / 5
when iops mode is enabled.
Despite having the same value, the delay of a cfq_queue in idle class
and the delay of cfq_group are different things, so I define two new
macros for the delay of a cfq_group under time-slice mode and iops mode.
Fixes:
9a7f38c42c2b ("cfq-iosched: Convert from jiffies to nanoseconds")
Cc: <stable@vger.kernel.org> # 4.8+
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Brian Foster [Wed, 31 May 2017 15:22:52 +0000 (08:22 -0700)]
xfs: use ->b_state to fix buffer I/O accounting release race
We've had user reports of unmount hangs in xfs_wait_buftarg() that
analysis shows is due to btp->bt_io_count == -1. bt_io_count
represents the count of in-flight asynchronous buffers and thus
should always be >= 0. xfs_wait_buftarg() waits for this value to
stabilize to zero in order to ensure that all untracked (with
respect to the lru) buffers have completed I/O processing before
unmount proceeds to tear down in-core data structures.
The value of -1 implies an I/O accounting decrement race. Indeed,
the fact that xfs_buf_ioacct_dec() is called from xfs_buf_rele()
(where the buffer lock is no longer held) means that bp->b_flags can
be updated from an unsafe context. While a user-level reproducer is
currently not available, some intrusive hacks to run racing buffer
lookups/ioacct/releases from multiple threads was used to
successfully manufacture this problem.
Existing callers do not expect to acquire the buffer lock from
xfs_buf_rele(). Therefore, we can not safely update ->b_flags from
this context. It turns out that we already have separate buffer
state bits and associated serialization for dealing with buffer LRU
state in the form of ->b_state and ->b_lock. Therefore, replace the
_XBF_IN_FLIGHT flag with a ->b_state variant, update the I/O
accounting wrappers appropriately and make sure they are used with
the correct locking. This ensures that buffer in-flight state can be
modified at buffer release time without racing with modifications
from a buffer lock holder.
Fixes:
9c7504aa72b6 ("xfs: track and serialize in-flight async buffers against unmount")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Libor Pechacek <lpechacek@suse.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Jan Kara [Wed, 31 May 2017 07:44:32 +0000 (09:44 +0200)]
dm: make flush bios explicitly sync
Commit
b685d3d65ac7 ("block: treat REQ_FUA and REQ_PREFLUSH as
synchronous") removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions. generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions.
Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.
Fixes:
b685d3d65ac7 ("block: treat REQ_FUA and REQ_PREFLUSH as synchronous")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Takashi Iwai [Tue, 30 May 2017 21:24:45 +0000 (23:24 +0200)]
ALSA: usb: Avoid VLA in mixer_us16x08.c
This is another attempt to work around the VLA used in
mixer_us16x08.c. Basically the temporary array is used individually
for two cases, and we can declare locally in each block, instead of
hackish max() usage.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 30 May 2017 21:21:07 +0000 (23:21 +0200)]
ALSA: usb: Fix a typo in Tascam US-16x08 mixer element
A mixer element created in a quirk for Tascam US-16x08 contains a
typo: it should be "EQ MidLow Q" instead of "EQ MidQLow Q".
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875
Fixes:
d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 30 May 2017 07:23:41 +0000 (09:23 +0200)]
Revert "ALSA: usb-audio: purge needless variable length array"
This reverts commit
89b593c30e83 ("ALSA: usb-audio: purge needless
variable length array"). The patch turned out to cause a severe
regression, triggering an Oops at snd_usb_ctl_msg(). It was overseen
that snd_usb_ctl_msg() writes back the response to the given buffer,
while the patch changed it to a read-only const buffer. (One should
always double-check when an extra pointer cast is present...)
As a simple fix, just revert the affected commit. It was merely a
cleanup. Although it brings VLA again, it's clearer as a fix. We'll
address the VLA later in another patch.
Fixes:
89b593c30e83 ("ALSA: usb-audio: purge needless variable length array")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Tue, 30 May 2017 19:38:59 +0000 (12:38 -0700)]
"Yes, people use FOLL_FORCE ;)"
This effectively reverts commit
8ee74a91ac30 ("proc: try to remove use
of FOLL_FORCE entirely")
It turns out that people do depend on FOLL_FORCE for the /proc/<pid>/mem
case, and we're talking not just debuggers. Talking to the affected people, the use-cases are:
Keno Fischer:
"We used these semantics as a hardening mechanism in the julia JIT. By
opening /proc/self/mem and using these semantics, we could avoid
needing RWX pages, or a dual mapping approach. We do have fallbacks to
these other methods (though getting EIO here actually causes an assert
in released versions - we'll updated that to make sure to take the
fall back in that case).
Nevertheless the /proc/self/mem approach was our favored approach
because it a) Required an attacker to be able to execute syscalls
which is a taller order than getting memory write and b) didn't double
the virtual address space requirements (as a dual mapping approach
would).
I think in general this feature is very useful for anybody who needs
to precisely control the execution of some other process. Various
debuggers (gdb/lldb/rr) certainly fall into that category, but there's
another class of such processes (wine, various emulators) which may
want to do that kind of thing.
Now, I suspect most of these will have the other process under ptrace
control, so maybe allowing (same_mm || ptraced) would be ok, but at
least for the sandbox/remote-jit use case, it would be perfectly
reasonable to not have the jit server be a ptracer"
Robert O'Callahan:
"We write to readonly code and data mappings via /proc/.../mem in lots
of different situations, particularly when we're adjusting program
state during replay to match the recorded execution.
Like Julia, we can add workarounds, but they could be expensive."
so not only do people use FOLL_FORCE for both reads and writes, but they
use it for both the local mm and remote mm.
With these comments in mind, we likely also cannot add the "are we
actively ptracing" check either, so this keeps the new code organization
and does not do a real revert that would add back the original comment
about "Maybe we should limit FOLL_FORCE to actual ptrace users?"
Reported-by: Keno Fischer <keno@juliacomputing.com>
Reported-by: Robert O'Callahan <robert@ocallahan.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keith Busch [Tue, 30 May 2017 18:39:11 +0000 (14:39 -0400)]
blk-mq: Take tagset lock when updating hw queues
The tagset lock needs to be held when iterating the tag_list, so a
lockdep assert was added when updating number of hardware queues. The
drivers calling this API, however, were unaware of the new requirement,
so are failing the assertion.
This patch takes the lock within the blk-mq function so the drivers do
not have to be modified in order to be safe.
Fixes:
705cda97e ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list")
Reported-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Gioh Kim [Tue, 30 May 2017 13:24:45 +0000 (15:24 +0200)]
KVM: SVM: ignore type when setting segment registers
Commit
19bca6ab75d8 ("KVM: SVM: Fix cross vendor migration issue with
unusable bit") added checking type when setting unusable.
So unusable can be set if present is 0 OR type is 0.
According to the AMD processor manual, long mode ignores the type value
in segment descriptor. And type can be 0 if it is read-only data segment.
Therefore type value is not related to unusable flag.
This patch is based on linux-next v4.12.0-rc3.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Radim Krčmář [Fri, 19 May 2017 13:48:51 +0000 (15:48 +0200)]
KVM: nVMX: fix nested_vmx_check_vmptr failure paths under debugging
kvm_skip_emulated_instruction() will return 0 if userspace is
single-stepping the guest.
kvm_skip_emulated_instruction() uses return status convention of exit
handler: 0 means "exit to userspace" and 1 means "continue vm entries".
The problem is that nested_vmx_check_vmptr() return status means
something else: 0 is ok, 1 is error.
This means we would continue executing after a failure. Static checker
noticed it because vmptr was not initialized.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
6affcbedcac7 ("KVM: x86: Add kvm_skip_emulated_instruction and use it.")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ilya Dryomov [Tue, 23 May 2017 15:49:55 +0000 (17:49 +0200)]
nbd: don't leak nbd_config
nbd_config is allocated in nbd_alloc_config(), but never freed.
Fixes:
5ea8d10802ec ("nbd: separate out the config information")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Ilya Dryomov [Tue, 23 May 2017 15:49:54 +0000 (17:49 +0200)]
nbd: nbd_reset() call in nbd_dev_add() is redundant
There is nothing to clear -- nbd_device has just been allocated.
Fold nbd_reset() into its other caller, nbd_config_put().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Wei Huang [Tue, 30 May 2017 10:56:22 +0000 (11:56 +0100)]
drivers/perf: arm_pmu_acpi: avoid perf IRQ init when guest PMU is off
We saw perf IRQ init failures when running Linux kernel in an ACPI
guest without PMU (i.e. pmu=off). This is because perf IRQ is not
present when pmu=off, but arm_pmu_acpi still tries to register
or unregister GSI. This patch addresses the problem by checking
gicc->performance_interrupt. If it is 0, which is the value set
by qemu when pmu=off, we skip the IRQ register/unregister process.
[ 4.069470] bc00:
0000000000040b00 ffff0000089db190
[ 4.070267] [<
ffff000008134f80>] enable_percpu_irq+0xdc/0xe4
[ 4.071192] [<
ffff000008667cc4>] arm_perf_starting_cpu+0x108/0x10c
[ 4.072200] [<
ffff0000080cbdd4>] cpuhp_invoke_callback+0x14c/0x4ac
[ 4.073210] [<
ffff0000080ccd3c>] cpuhp_thread_fun+0xd4/0x11c
[ 4.074132] [<
ffff0000080f1394>] smpboot_thread_fn+0x1b4/0x1c4
[ 4.075081] [<
ffff0000080ec90c>] kthread+0x10c/0x138
[ 4.075921] [<
ffff0000080833c0>] ret_from_fork+0x10/0x50
[ 4.076947] genirq: Setting trigger mode 4 for irq 43 failed
(gic_set_type+0x0/0x74)
Signed-off-by: Wei Huang <wei@redhat.com>
[will: add comment justifying deviation from ACPI spec, removed redundant hunk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kuninori Morimoto [Tue, 23 May 2017 07:08:43 +0000 (07:08 +0000)]
rcar-dmac: fixup descriptor pointer for descriptor mode
In descriptor mode, the descriptor running pointer is not maintained
by the interrupt handler, thus, driver finds the running descriptor
from the descriptor pointer field in the CHCRB register.
But, CHCRB::DPTR indicates *next* descriptor pointer, not current.
Thus, The residue calculation will be missed. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Linus Torvalds [Mon, 29 May 2017 17:05:19 +0000 (10:05 -0700)]
Merge tag 'pinctrl-v4.12-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is an overdue pull request for pin control fixes, the most
prominent feature is to make Intel Chromebooks (and I suspect any
other Cherryview-based Intel thing) happy again, which we really want
to see.
There is a patch hitting drivers/firmware/* that I was uncertain to
who actually manages, but I got Andy Shevchenko's and Dmitry Torokov's
review tags on it and I trust them both 100% to do the right thing for
Intel platform drivers.
Summary:
- Make a few Intel Chromebooks with Cherryview DMI firmware work
smoothly.
- A fix for some bogus allocations in the generic group management
code.
- Some GPIO descriptor lookup table stubs. Merged through the pin
control tree for administrative reasons.
- Revert the "bi-directional" and "output-enable" generic properties:
we need more discussions around this. It seems other SoCs are using
input/output gate enablement and these terms are not correct.
- Fix mux and drive strength atomically in the MXS driver.
- Fix the SPDIF function on sunxi A83T.
- OF table terminators and other small fixes"
* tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: Fix SPDIF function name for A83T
pinctrl: mxs: atomically switch mux and drive strength config
pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems
firmware: dmi: Add DMI_PRODUCT_FAMILY identification string
pinctrl: core: Fix warning by removing bogus code
gpiolib: Add stubs for gpiod lookup table interface
Revert "pinctrl: generic: Add bi-directional and output-enable"
pinctrl: cherryview: Add terminate entry for dmi_system_id tables
Vegard Nossum [Mon, 29 May 2017 07:22:07 +0000 (09:22 +0200)]
kthread: fix boot hang (regression) on MIPS/OpenRISC
This fixes a regression in commit
4d6501dce079 where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().
We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().
Review notes:
- As far as I can tell, copy_process() is the only user of
copy_thread_tls(), which is the only caller of copy_thread() for
architectures that don't implement copy_thread_tls().
- After this patch, there is no arch-specific code touching
p->set_child_tid or p->clear_child_tid whatsoever.
- It may look like MIPS/OpenRISC wanted to always have these fields be
NULL, but that's not true, as copy_process() would unconditionally
set them again _after_ calling copy_thread_tls() before commit
4d6501dce079.
Fixes:
4d6501dce079c1eb6bf0b1d8f528a5e81770109e ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi [Mon, 29 May 2017 13:15:27 +0000 (15:15 +0200)]
ovl: filter trusted xattr for non-admin
Filesystems filter out extended attributes in the "trusted." domain for
unprivlieged callers.
Overlay calls underlying filesystem's method with elevated privs, so need
to do the filtering in overlayfs too.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Hans de Goede [Tue, 9 May 2017 08:04:36 +0000 (10:04 +0200)]
HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices
For ACPI devices which do not have a _PSC method, the ACPI subsys cannot
query their initial state at boot, so these devices are assumed to have
been put in D0 by the BIOS, but for touchscreens that is not always true.
This commit adds a call to acpi_device_fix_up_power to explicitly put
devices without a _PSC method into D0 state (for devices with a _PSC
method it is a nop). Note we only need to do this on probe, after a
resume the ACPI subsys knows the device is in D3 and will properly
put it in D0.
This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1
device failing to probe with a "hid_descr_cmd failed" error.
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jani Nikula [Thu, 18 May 2017 11:10:25 +0000 (14:10 +0300)]
drm/i915: Detect USB-C specific dongles before reducing M and N
The Analogix 7737 DP to HDMI converter requires reduced M and N values
when to operate correctly at HBR2. We tried to reduce the M/N values for
all devices in commit
9a86cda07af2 ("drm/i915/dp: reduce link M/N
parameters"), but that regressed some other sinks. Detect this IC by its
OUI value of 0x0022B9 via the DPCD quirk list, and only reduce the M/N
values for that.
v2 by Jani: Rebased on the DP quirk database
v3 by Jani: Rebased on the reworked DP quirk database
v4 by Jani: Improve commit message (Daniel)
Fixes:
9a86cda07af2 ("drm/i915/dp: reduce link M/N parameters")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93578
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100755
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/2d2e30f8f47d3f28c9b74ca2612336a54585c3ec.1495105635.git.jani.nikula@intel.com
Jani Nikula [Thu, 18 May 2017 11:10:24 +0000 (14:10 +0300)]
drm/dp: start a DPCD based DP sink/branch device quirk database
Face the fact, there are Display Port sink and branch devices out there
in the wild that don't follow the Display Port specifications, or they
have bugs, or just otherwise require special treatment. Start a common
quirk database the drivers can query based on the DP device
identification. At least for now, we leave the workarounds for the
drivers to implement as they see fit.
For starters, add a branch device that can't handle full 24-bit main
link Mdiv and Ndiv main link attributes properly. Naturally, the
workaround of reducing main link attributes for all devices ended up in
regressions for other devices. So here we are.
v2: Rebase on DRM DP desc read helpers
v3: Fix the OUI memcmp blunder (Clint)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # v2
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/91ec198dd95258dbf3bee2f6be739e0da73b4fdd.1495105635.git.jani.nikula@intel.com
Jani Nikula [Thu, 18 May 2017 11:10:23 +0000 (14:10 +0300)]
drm/i915: use drm DP helper to read DPCD desc
Switch to using the common DP helpers instead of using our own.
v2: also remove leftover struct intel_dp_desc (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jani Nikula [Thu, 18 May 2017 11:10:22 +0000 (14:10 +0300)]
drm/dp: add helper for reading DP sink/branch device desc from DPCD
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/acba54da7d80eafea9e59a893e27e3c31028c0ba.1495105635.git.jani.nikula@intel.com
Amir Goldstein [Wed, 24 May 2017 12:29:33 +0000 (15:29 +0300)]
ovl: mark upper merge dir with type origin entries "impure"
An upper dir is marked "impure" to let ovl_iterate() know that this
directory may contain non pure upper entries whose d_ino may need to be
read from the origin inode.
We already mark a non-merge dir "impure" when moving a non-pure child
entry inside it, to let ovl_iterate() know not to iterate the non-merge
dir directly.
Mark also a merge dir "impure" when moving a non-pure child entry inside
it and when copying up a child entry inside it.
This can be used to optimize ovl_iterate() to perform a "pure merge" of
upper and lower directories, merging the content of the directories,
without having to read d_ino from origin inodes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Ilya Dryomov [Mon, 22 May 2017 17:59:24 +0000 (19:59 +0200)]
rbd: implement REQ_OP_WRITE_ZEROES
Commit
93c1defedcae ("rbd: remove the discard_zeroes_data flag")
explicitly didn't implement REQ_OP_WRITE_ZEROES for rbd, while the
following commit
48920ff2a5a9 ("block: remove the discard_zeroes_data
flag") dropped ->discard_zeroes_data in favor of REQ_OP_WRITE_ZEROES.
rbd does support efficient zeroing via CEPH_OSD_OP_ZERO opcode and will
release either some or all blocks depending on whether the zeroing
request is rbd_obj_bytes() aligned. This is how we currently implement
discards, so REQ_OP_WRITE_ZEROES can be identical to REQ_OP_DISCARD for
now. Caveats:
- REQ_NOUNMAP is ignored, but AFAICT that's true of at least two other
current implementations - nvme and loop
- there is no ->write_zeroes_alignment and blk_bio_write_zeroes_split()
is hence less helpful than blk_bio_discard_split(), but this can (and
should) be fixed on the rbd side
In the future we will split these into two code paths to respect
REQ_NOUNMAP on zeroout and save on zeroing blocks that couldn't be
released on discard.
Fixes:
93c1defedcae ("rbd: remove the discard_zeroes_data flag")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Borislav Petkov [Sun, 28 May 2017 09:03:42 +0000 (11:03 +0200)]
x86/debug/32: Convert a smp_processor_id() call to raw to avoid DEBUG_PREEMPT warning
... to raw_smp_processor_id() to not trip the
BUG: using smp_processor_id() in preemptible [
00000000] code: swapper/0/1
check. The reasoning behind it is that __warn() already uses the raw_
variants but the show_regs() path on 32-bit doesn't.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170528092212.fiod7kygpjm23m3o@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Sun, 28 May 2017 20:04:14 +0000 (22:04 +0200)]
x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug
With CONFIG_DEBUG_PREEMPT enabled, I get:
BUG: using smp_processor_id() in preemptible [
00000000] code: swapper/0/1
caller is debug_smp_processor_id
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2
Call Trace:
dump_stack
check_preemption_disabled
debug_smp_processor_id
save_microcode_in_initrd_amd
? microcode_init
save_microcode_in_initrd
...
because, well, it says it above, we're using smp_processor_id() in
preemptible code.
But passing the CPU number is not really needed. It is only used to
determine whether we're on the BSP, and, if so, to save the microcode
patch for early loading.
[ We don't absolutely need to do it on the BSP but we do that
customarily there. ]
Instead, convert that function parameter to a boolean which denotes
whether the patch should be saved or not, thereby avoiding the use of
smp_processor_id() in preemptible code.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Inki Dae [Mon, 29 May 2017 00:59:05 +0000 (09:59 +0900)]
drm/exynos: clean up description of exynos_drm_crtc
This patch removes unnecessary descriptions on
exynos_drm_crtc structure and adds one description
which specifies what pipe_clk member does.
pipe_clk support had been added by below patch without any description,
drm/exynos: add support for pipeline clock to the framework
Commit-id :
f26b9343f582f44ec920474d71b4b2220b1ed9a8
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Hoegeun Kwon [Fri, 26 May 2017 01:02:01 +0000 (10:02 +0900)]
drm/exynos: dsi: Remove bridge node reference in removal
Since bridge node is referenced during in the probe, it should be
released on removal.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Hoegeun Kwon [Thu, 13 Apr 2017 06:05:26 +0000 (15:05 +0900)]
drm/exynos: dsi: Fix the parse_dt function
The dsi + panel is a parental relationship, so OF grpah is not needed.
Therefore, the current dsi_parse_dt function will throw an error,
because there is no linked OF graph for the case fimd + dsi + panel.
Parse the Pll burst and esc clock frequency properties in dsi_parse_dt()
and create a bridge_node only if there is an OF graph associated with dsi.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Daniel Vetter [Wed, 8 Mar 2017 14:12:53 +0000 (15:12 +0100)]
drm/exynos: Merge pre/postclose hooks
Again no apparent explanation for the split except hysterical raisins.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Linus Torvalds [Mon, 29 May 2017 00:20:53 +0000 (17:20 -0700)]
Linux 4.12-rc3
Linus Torvalds [Sun, 28 May 2017 23:18:27 +0000 (16:18 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC management fixes from Eduardo Valentin:
- fixes to TI SoC driver, Broadcom, qoriq
- small sparse warning fix on thermal core
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: broadcom: ns-thermal: default on iProc SoCs
ti-soc-thermal: Fix a typo in a comment line
ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
thermal: core: make thermal_emergency_poweroff static
thermal: qoriq: remove useless call for of_thermal_get_trip_points()
Kees Cook [Sat, 6 May 2017 08:10:06 +0000 (01:10 -0700)]
mtk-vcodec: Use designated initializers
The randstruct plugin requires designated initializers for structures
that are entirely function pointers.
Cc: Wu-Cheng Li <wuchengli@chromium.org>
Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Kees Cook [Sat, 6 May 2017 08:09:00 +0000 (01:09 -0700)]
drm/amd/powerplay: Use designated initializers
The randstruct plugin requires designated initializers for structures
that are entirely function pointers.
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Kees Cook [Sat, 6 May 2017 07:54:07 +0000 (00:54 -0700)]
drm/amdgpu: Use designated initializers
The randstruct plugin requires structures that are entirely function
pointers be initialized using designated initializers.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Kees Cook [Wed, 5 Apr 2017 05:07:10 +0000 (22:07 -0700)]
sgi-xp: Use designated initializers
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. In this case, no initializers
are needed (they can be NULL initialized and callers adjusted to check
for NULL, which is more efficient than an indirect call).
Cc: Robin Holt <robinmholt@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Kees Cook [Mon, 8 May 2017 21:49:27 +0000 (14:49 -0700)]
ocfs2: Use ERR_CAST() to avoid cross-structure cast
When trying to propagate an error result, the error return path attempts
to retain the error, but does this with an open cast across very different
types, which the upcoming structure layout randomization plugin flags as
being potentially dangerous in the face of randomization. This is a false
positive, but what this code actually wants to do is use ERR_CAST() to
retain the error value.
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Kees Cook [Mon, 8 May 2017 21:45:26 +0000 (14:45 -0700)]
ntfs: Use ERR_CAST() to avoid cross-structure cast
When trying to propagate an error result, the error return path attempts
to retain the error, but does this with an open cast across very different
types, which the upcoming structure layout randomization plugin flags as
being potentially dangerous in the face of randomization. This is a false
positive, but what this code actually wants to do is use ERR_CAST() to
retain the error value.
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Kees Cook [Wed, 5 Apr 2017 00:08:42 +0000 (17:08 -0700)]
NFS: Use ERR_CAST() to avoid cross-structure cast
When the call to nfs_devname() fails, the error path attempts to retain
the error via the mnt variable, but this requires a cast across very
different types (char * to struct vfsmount *), which the upcoming
structure layout randomization plugin flags as being potentially
dangerous in the face of randomization. This is a false positive, but
what this code actually wants to do is retain the error value, so this
patch explicitly sets it, instead of using what seems to be an
unexpected cast.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dave Young [Fri, 26 May 2017 11:36:51 +0000 (12:36 +0100)]
efi/bgrt: Skip efi_bgrt_init() in case of non-EFI boot
Sabrina Dubroca reported an early panic:
BUG: unable to handle kernel paging request at
ffffffffff240001
IP: efi_bgrt_init+0xdc/0x134
[...]
---[ end Kernel panic - not syncing: Attempted to kill the idle task!
... which was introduced by:
7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
The cause is that on this machine the firmware provides the EFI ACPI BGRT
table even on legacy non-EFI bootups - which table should be EFI only.
The garbage BGRT data causes the efi_bgrt_init() panic.
Add a check to skip efi_bgrt_init() in case non-EFI bootup to work around
this firmware bug.
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes:
7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170526113652.21339-6-matt@codeblueprint.co.uk
[ Rewrote the changelog to be more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Baoquan He [Fri, 26 May 2017 11:36:50 +0000 (12:36 +0100)]
x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled
For EFI with the 'efi=old_map' kernel option specified, the kernel will panic
when KASLR is enabled:
BUG: unable to handle kernel paging request at
000000007febd57e
IP: 0x7febd57e
PGD
1025a067
PUD 0
Oops: 0010 [#1] SMP
Call Trace:
efi_enter_virtual_mode()
start_kernel()
x86_64_start_reservations()
x86_64_start_kernel()
start_cpu()
The root cause is that the identity mapping is not built correctly
in the 'efi=old_map' case.
On 'nokaslr' kernels, PAGE_OFFSET is 0xffff880000000000 which is PGDIR_SIZE
aligned. We can borrow the PUD table from the direct mappings safely. Given a
physical address X, we have pud_index(X) == pud_index(__va(X)).
However, on KASLR kernels, PAGE_OFFSET is PUD_SIZE aligned. For a given physical
address X, pud_index(X) != pud_index(__va(X)). We can't just copy the PGD entry
from direct mapping to build identity mapping, instead we need to copy the
PUD entries one by one from the direct mapping.
Fix it.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: Frank Ramsay <frank.ramsay@hpe.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170526113652.21339-5-matt@codeblueprint.co.uk
[ Fixed and reworded the changelog and code comments to be more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sai Praneeth [Fri, 26 May 2017 11:36:49 +0000 (12:36 +0100)]
x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map
Booting kexec kernel with "efi=old_map" in kernel command line hits
kernel panic as shown below.
BUG: unable to handle kernel paging request at
ffff88007fe78070
IP: virt_efi_set_variable.part.7+0x63/0x1b0
PGD
7ea28067
PUD
7ea2b067
PMD
7ea2d067
PTE 0
[...]
Call Trace:
virt_efi_set_variable()
efi_delete_dummy_variable()
efi_enter_virtual_mode()
start_kernel()
x86_64_start_reservations()
x86_64_start_kernel()
start_cpu()
[ efi=old_map was never intended to work with kexec. The problem with
using efi=old_map is that the virtual addresses are assigned from the
memory region used by other kernel mappings; vmalloc() space.
Potentially there could be collisions when booting kexec if something
else is mapped at the virtual address we allocated for runtime service
regions in the initial boot - Matt Fleming ]
Since kexec was never intended to work with efi=old_map, disable
runtime services in kexec if booted with efi=old_map, so that we don't
panic.
Tested-by: Lee Chun-Yi <jlee@suse.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170526113652.21339-4-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnd Bergmann [Fri, 26 May 2017 11:36:48 +0000 (12:36 +0100)]
efi: Remove duplicate 'const' specifiers
gcc-7 shows these harmless warnings:
drivers/firmware/efi/libstub/secureboot.c:19:27: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
static const efi_char16_t const efi_SecureBoot_name[] = {
drivers/firmware/efi/libstub/secureboot.c:22:27: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
Removing one of the specifiers gives us the expected behavior.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes:
de8cb458625c ("efi: Get and store the secure boot status")
Link: http://lkml.kernel.org/r/20170526113652.21339-3-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Juergen Gross [Fri, 26 May 2017 11:36:47 +0000 (12:36 +0100)]
efi: Don't issue error message when booted under Xen
When booted as Xen dom0 there won't be an EFI memmap allocated. Avoid
issuing an error message in this case:
[ 0.144079] efi: Failed to allocate new EFI memmap
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170526113652.21339-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jordan Crouse [Mon, 8 May 2017 20:34:58 +0000 (14:34 -0600)]
drm/msm: Fix the check for the command size
The overrun check for the size of submitted commands is off by one.
It should allow the offset plus the size to be equal to the
size of the memory object when the command stream is very tightly
constructed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Jordan Crouse [Mon, 8 May 2017 20:34:57 +0000 (14:34 -0600)]
drm/msm: Take the mutex before calling msm_gem_new_impl
Amongst its other duties, msm_gem_new_impl adds the newly created
GEM object to the shared inactive list which may also be actively
modifiying the list during submission. All the paths to modify
the list are protected by the mutex except for the one through
msm_gem_import which can end up causing list corruption.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[add extra WARN_ON(!mutex_is_locked(&dev->struct_mutex))]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Philipp Zabel [Fri, 17 Mar 2017 18:38:40 +0000 (19:38 +0100)]
drm/msm: for array in-fences, check if all backing fences are from our own context before waiting
Use the dma_fence_match_context helper to check if all backing fences
are from our own context, in which case we don't have to wait.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
[rebased on code-motion]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tobias Klauser [Wed, 24 May 2017 16:12:19 +0000 (18:12 +0200)]
drm/msm: constify irq_domain_ops
struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sun, 21 May 2017 16:05:07 +0000 (12:05 -0400)]
drm/msm/mdp5: release hwpipe(s) for unused planes
Otherwise, if userspace doesn't re-use a given plane, it's hwpipe(s)
could stay permanently assigned.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Eric Anholt [Wed, 12 Apr 2017 19:12:00 +0000 (12:12 -0700)]
drm/msm: Reuse dma_fence_release.
If we follow the typical pattern of the base class being the first
member, we can use the default dma_fence_free function.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Eric Anholt [Wed, 12 Apr 2017 19:11:58 +0000 (12:11 -0700)]
drm/msm: Expose our reservation object when exporting a dmabuf.
Without this, polling on the dma-buf (and presumably other devices
synchronizing against our rendering) would return immediately, even
while the BO was busy.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 3 May 2017 14:43:14 +0000 (10:43 -0400)]
drm/msm/gpu: check legacy clk names in get_clocks()
Otherwise if someone was using old bindings with "core_clk" instead of
"core" as the clock name, we'd never find it and gpu would be stuck at
27MHz (or whatever it's slowest rate is).
Fixes:
98db803 ("msm/drm: gpu: Dynamically locate the clocks from the device tree")
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 3 May 2017 14:04:48 +0000 (10:04 -0400)]
drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state()
Somehow the helper was never retrofitted for mdp5. Which meant when
plane_state->fence was added, it could get copied into new state in
mdp5_plane_duplicate_state().
If an update to disable the plane (for example on rmfb) managed to sneak
in after an nonblock update had swapped state, but before it was
committed, we'd get a splat:
WARNING: CPU: 1 PID: 69 at ../drivers/gpu/drm/drm_atomic_helper.c:1061 drm_atomic_helper_wait_for_fences+0xe0/0xf8
Modules linked in:
CPU: 1 PID: 69 Comm: kworker/1:1 Tainted: G W 4.11.0-rc8+ #1187
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
Workqueue: events drm_mode_rmfb_work_fn
task:
ffffffc036560d00 task.stack:
ffffffc036550000
PC is at drm_atomic_helper_wait_for_fences+0xe0/0xf8
LR is at complete_commit.isra.1+0x44/0x1c0
pc : [<
ffffff80084f6040>] lr : [<
ffffff800854176c>] pstate:
20000145
sp :
ffffffc036553b60
x29:
ffffffc036553b60 x28:
ffffffc0264e6a00
x27:
ffffffc035659000 x26:
0000000000000000
x25:
ffffffc0240e8000 x24:
0000000000000038
x23:
0000000000000000 x22:
ffffff800858f200
x21:
ffffffc0240e8000 x20:
ffffffc02f56a800
x19:
0000000000000000 x18:
0000000000000000
x17:
0000000000000000 x16:
0000000000000000
x15:
0000000000000000 x14:
ffffffc00a192700
x13:
0000000000000004 x12:
0000000000000000
x11:
ffffff80089a1690 x10:
00000000000008f0
x9 :
ffffffc036553b20 x8 :
ffffffc036561650
x7 :
ffffffc03fe6cb40 x6 :
0000000000000000
x5 :
0000000000000001 x4 :
0000000000000002
x3 :
ffffffc035659000 x2 :
ffffffc0240e8c80
x1 :
0000000000000000 x0 :
ffffffc02adbe588
---[ end trace
13aeec77c3fb55e2 ]---
Call trace:
Exception stack(0xffffffc036553990 to 0xffffffc036553ac0)
3980:
0000000000000000 0000008000000000
39a0:
ffffffc036553b60 ffffff80084f6040 0000000000004ff0 0000000000000038
39c0:
ffffffc0365539d0 ffffff800857e098 ffffffc036553a00 ffffff800857e1b0
39e0:
ffffffc036553a10 ffffff800857c554 ffffffc0365e8400 ffffffc0365e8400
3a00:
ffffffc036553a20 ffffff8008103358 000000000001aad7 ffffff800851b72c
3a20:
ffffffc036553a50 ffffff80080e9228 ffffffc02adbe588 0000000000000000
3a40:
ffffffc0240e8c80 ffffffc035659000 0000000000000002 0000000000000001
3a60:
0000000000000000 ffffffc03fe6cb40 ffffffc036561650 ffffffc036553b20
3a80:
00000000000008f0 ffffff80089a1690 0000000000000000 0000000000000004
3aa0:
ffffffc00a192700 0000000000000000 0000000000000000 0000000000000000
[<
ffffff80084f6040>] drm_atomic_helper_wait_for_fences+0xe0/0xf8
[<
ffffff800854176c>] complete_commit.isra.1+0x44/0x1c0
[<
ffffff8008541c64>] msm_atomic_commit+0x32c/0x350
[<
ffffff8008516230>] drm_atomic_commit+0x50/0x60
[<
ffffff8008517548>] drm_atomic_remove_fb+0x158/0x250
[<
ffffff80085186d0>] drm_framebuffer_remove+0x50/0x158
[<
ffffff8008518818>] drm_mode_rmfb_work_fn+0x40/0x58
[<
ffffff80080d5668>] process_one_work+0x1d0/0x378
[<
ffffff80080d5a54>] worker_thread+0x244/0x488
[<
ffffff80080db7fc>] kthread+0xfc/0x128
[<
ffffff8008082ec0>] ret_from_fork+0x10/0x50
Fixes:
9626014 ("drm/fence: add in-fences support")
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 2 May 2017 16:39:53 +0000 (12:39 -0400)]
drm/msm: select PM_OPP
Otherwise, if nothing else enabled selects it, dev_pm_opp_of_add_table()
will return -ENOTSUPP.
Fixes:
e2af8b6 ("drm/msm: gpu: Use OPP tables if we can")
Signed-off-by: Rob Clark <robdclark@gmail.com>
Linus Torvalds [Sat, 27 May 2017 16:39:09 +0000 (09:39 -0700)]
Merge tag 'tty-4.12-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger
than normal, which is why I had them bake in linux-next for a few
weeks and didn't send them to you for -rc2.
They revert a few of the serdev patches from 4.12-rc1, and bring
things back to how they were in 4.11, to try to make things a bit more
stable there. Rob and Johan both agree that this is the way forward,
so this isn't people squabbling over semantics. Other than that, just
a few minor serial driver fixes that people have had problems with.
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: altera_uart: call iounmap() at driver remove
serial: imx: ensure UCR3 and UFCR are setup correctly
MAINTAINERS/serial: Change maintainer of jsm driver
serial: enable serdev support
tty/serdev: add serdev registration interface
serdev: Restore serdev_device_write_buf for atomic context
serial: core: fix crash in uart_suspend_port
tty: fix port buffer locking
tty: ehv_bytechan: clean up init error handling
serial: ifx6x60: fix use-after-free on module unload
serial: altera_jtaguart: adding iounmap()
serial: exar: Fix stuck MSIs
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
serdev: fix tty-port client deregistration
Revert "tty_port: register tty ports with serdev bus"
drivers/tty: 8250: only call fintek_8250_probe when doing port I/O
Linus Torvalds [Sat, 27 May 2017 16:28:34 +0000 (09:28 -0700)]
Merge tag 'powerpc-4.12-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix running SPU programs on Cell, and a few other minor fixes.
Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas
Piggin"
* tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions
powerpc/spufs: Fix hash faults for kernel regions
powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N
powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call
selftests/powerpc: Fix TM resched DSCR test with some compilers
Linus Torvalds [Sat, 27 May 2017 16:17:58 +0000 (09:17 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for X86:
- The final fix for the end-of-stack issue in the unwinder
- Handle non PAT systems gracefully
- Prevent access to uninitiliazed memory
- Move early delay calaibration after basic init
- Fix Kconfig help text
- Fix a cross compile issue
- Unbreak older make versions"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()
x86/PAT: Fix Xorg regression on CPUs that don't support PAT
x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation
x86/build: Permit building with old make versions
x86/unwind: Add end-of-stack check for ftrace handlers
Revert "x86/entry: Fix the end of the stack for newly forked tasks"
x86/boot: Use CROSS_COMPILE prefix for readelf