OSDN Git Service
Linus Torvalds [Fri, 3 Dec 2010 18:08:52 +0000 (10:08 -0800)]
Merge branches 'upstream/core' and 'upstream/bugfix' of git://git./linux/kernel/git/jeremy/xen
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: allocate irq descs on any NUMA node
xen: prevent crashes with non-HIGHMEM 32-bit kernels with largeish memory
xen: use default_idle
xen: clean up "extra" memory handling some more
* 'upstream/bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: x86/32: perform initial startup on initial_page_table
xen: don't bother to stop other cpus on shutdown/reboot
Linus Torvalds [Fri, 3 Dec 2010 17:20:41 +0000 (09:20 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: omap: N810: Don't select CONFIG_OMAP_MUX but make it as dependency
ALSA: hda: Use "alienware" model quirk for another SSID
ASoC: WM8731: Fix incorrect mask for bypass path disable
s6105-ipcam: fix compilation
s6000-pcm: fix compilation
s6000-i2s: fix compilation
ASoC: Fix missing spin_unlock_irqrestore
ALSA: Fix SNDCTL_DSP_RESET ioctl for OSS emulation
ASoC: Add missing dev_set_drvdata in p1022_ds_probe
ASoC: Add missing dev_set_drvdata in mpc8610_hpcd_probe
ASoC: Remove unneeded !! operations while checking return value of nuc900_checkready
ASoC: Fix compile error for nuc900-pcm.c
ASoC: Fix prototype for nuc900_ac97_probe and nuc900_ac97_remove
ASoC: Fix compile error for nuc900-ac97.c
ALSA: hda: Use BIOS auto-parsing instead of existing model quirk for MEDION MD2
Linus Torvalds [Fri, 3 Dec 2010 17:20:21 +0000 (09:20 -0800)]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6
* 'linux-next' of git://git.infradead.org/ubi-2.6:
UBI: fix corrupted PEB detection for NOR flash
Linus Torvalds [Fri, 3 Dec 2010 17:19:54 +0000 (09:19 -0800)]
Merge branch 'sh-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: se/7724: Remove FSI/B of GPIO init code
sh: se/7724: Update clock framework of FSI clock to non-legacy
sh: Assume new page cache pages have dirty dcache lines.
sh: boards: mach-se: use IS_ERR() instead of NULL check
sh: Add div6_reparent_clks to clock framework for FSI
dma: shdma: add a MODULE_ALIAS() to allow module autoloading
Linus Torvalds [Fri, 3 Dec 2010 17:19:31 +0000 (09:19 -0800)]
Merge branch 'fbdev-fixes-for-linus' of git://git./linux/kernel/git/lethal/fbdev-2.6
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
lxfb: Maintain video processor palette through suspend/resume
video: da8xx: Register IRQ as last thing in driver probing.
framebuffer: fix fbcmap.c kernel-doc warning
David Howells [Fri, 3 Dec 2010 15:59:50 +0000 (15:59 +0000)]
MN10300: Implement asm/syscall.h
Implement asm/syscall.h for the MN10300 arch.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy [Thu, 2 Dec 2010 04:34:01 +0000 (06:34 +0200)]
UBI: fix corrupted PEB detection for NOR flash
My new shiny code for corrupted PEB detection has NOR specific bug.
We tread PEB as corrupted and preserve it, if
1. EC header is OK.
2. VID header is corrupted.
3. data area is not "all 0xFFs"
In case of NOR we have 'nor_erase_prepare()' quirk, which invalidates
the headers before erasing the PEB. And we invalidate first the VID
header, and then the EC header. So if a power cut happens after we have
invalidated the VID header, but before we have invalidated the EC
header, we end up with a PEB which satisfies the above 3 conditions,
and the scanning code will treat it as corrupted, and will print
scary warnings, wrongly.
This patch fixes the issue by firt invalidating the EC header, then
invalidating the VID header. In case of power cut inbetween, we still
just lose the EC header, and UBI can deal with this situation gracefully.
Thanks to Anatolij Gustschin <agust@denx.de> for tracking this down.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reported-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Anatolij Gustschin <agust@denx.de>
Paul Mundt [Fri, 3 Dec 2010 05:42:29 +0000 (14:42 +0900)]
Merge branch 'sh/urgent' into sh-fixes-for-linus
Nobuhiro Iwamatsu [Fri, 3 Dec 2010 05:37:54 +0000 (05:37 +0000)]
sh: se/7724: Remove FSI/B of GPIO init code
se7724 board does not have FSI/B.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Nobuhiro Iwamatsu [Fri, 3 Dec 2010 05:37:53 +0000 (05:37 +0000)]
sh: se/7724: Update clock framework of FSI clock to non-legacy
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Fri, 3 Dec 2010 01:40:04 +0000 (17:40 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: length resolution should be reported units/mm
HID: add support for F430 Force Feedback Wheel
HID: egalax: Use kzalloc
HID: Remove KERN_DEBUG from dbg_hid use
Manually fixed trivial conflict in drivers/hid/hid-input.c (due to
removal of KERN_DEBUG from dbg_hid use clashing with new keycode
interface switch)
Jeremy Fitzhardinge [Fri, 3 Dec 2010 00:14:27 +0000 (16:14 -0800)]
xen: allocate irq descs on any NUMA node
Allocate irq descs on any NUMA node (we don't care) rather than
specifically node 0, which may not exist.
(At the moment NUMA is meaningless within a domain, so any info
the kernel has is just from an SRAT table we haven't suppressed/disabled.)
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Jeremy Fitzhardinge [Thu, 2 Dec 2010 23:30:06 +0000 (15:30 -0800)]
xen: prevent crashes with non-HIGHMEM 32-bit kernels with largeish memory
If this is a non-HIGHMEM 32-bit kernel, then the page structures only go
up to the limit of addressable memory, even if more memory is physically
present. Don't try to add that extra memory to the balloon.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Nelson Elhage [Thu, 2 Dec 2010 22:31:21 +0000 (14:31 -0800)]
do_exit(): make sure that we run with get_fs() == USER_DS
If a user manages to trigger an oops with fs set to KERNEL_DS, fs is not
otherwise reset before do_exit(). do_exit may later (via mm_release in
fork.c) do a put_user to a user-controlled address, potentially allowing
a user to leverage an oops into a controlled write into kernel memory.
This is only triggerable in the presence of another bug, but this
potentially turns a lot of DoS bugs into privilege escalations, so it's
worth fixing. I have proof-of-concept code which uses this bug along
with CVE-2010-3849 to write a zero to an arbitrary kernel address, so
I've tested that this is not theoretical.
A more logical place to put this fix might be when we know an oops has
occurred, before we call do_exit(), but that would involve changing
every architecture, in multiple places.
Let's just stick it in do_exit instead.
[akpm@linux-foundation.org: update code comment]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KOSAKI Motohiro [Thu, 2 Dec 2010 22:31:20 +0000 (14:31 -0800)]
ksm: annotate ksm_thread_mutex is no deadlock source
commit
62b61f611e ("ksm: memory hotremove migration only") caused the
following new lockdep warning.
=======================================================
[ INFO: possible circular locking dependency detected ]
-------------------------------------------------------
bash/1621 is trying to acquire lock:
((memory_chain).rwsem){.+.+.+}, at: [<
ffffffff81079339>]
__blocking_notifier_call_chain+0x69/0xc0
but task is already holding lock:
(ksm_thread_mutex){+.+.+.}, at: [<
ffffffff8113a3aa>]
ksm_memory_callback+0x3a/0xc0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (ksm_thread_mutex){+.+.+.}:
[<
ffffffff8108b70a>] lock_acquire+0xaa/0x140
[<
ffffffff81505d74>] __mutex_lock_common+0x44/0x3f0
[<
ffffffff81506228>] mutex_lock_nested+0x48/0x60
[<
ffffffff8113a3aa>] ksm_memory_callback+0x3a/0xc0
[<
ffffffff8150c21c>] notifier_call_chain+0x8c/0xe0
[<
ffffffff8107934e>] __blocking_notifier_call_chain+0x7e/0xc0
[<
ffffffff810793a6>] blocking_notifier_call_chain+0x16/0x20
[<
ffffffff813afbfb>] memory_notify+0x1b/0x20
[<
ffffffff81141b7c>] remove_memory+0x1cc/0x5f0
[<
ffffffff813af53d>] memory_block_change_state+0xfd/0x1a0
[<
ffffffff813afd62>] store_mem_state+0xe2/0xf0
[<
ffffffff813a0bb0>] sysdev_store+0x20/0x30
[<
ffffffff811bc116>] sysfs_write_file+0xe6/0x170
[<
ffffffff8114f398>] vfs_write+0xc8/0x190
[<
ffffffff8114fc14>] sys_write+0x54/0x90
[<
ffffffff810028b2>] system_call_fastpath+0x16/0x1b
-> #0 ((memory_chain).rwsem){.+.+.+}:
[<
ffffffff8108b5ba>] __lock_acquire+0x155a/0x1600
[<
ffffffff8108b70a>] lock_acquire+0xaa/0x140
[<
ffffffff81506601>] down_read+0x51/0xa0
[<
ffffffff81079339>] __blocking_notifier_call_chain+0x69/0xc0
[<
ffffffff810793a6>] blocking_notifier_call_chain+0x16/0x20
[<
ffffffff813afbfb>] memory_notify+0x1b/0x20
[<
ffffffff81141f1e>] remove_memory+0x56e/0x5f0
[<
ffffffff813af53d>] memory_block_change_state+0xfd/0x1a0
[<
ffffffff813afd62>] store_mem_state+0xe2/0xf0
[<
ffffffff813a0bb0>] sysdev_store+0x20/0x30
[<
ffffffff811bc116>] sysfs_write_file+0xe6/0x170
[<
ffffffff8114f398>] vfs_write+0xc8/0x190
[<
ffffffff8114fc14>] sys_write+0x54/0x90
[<
ffffffff810028b2>] system_call_fastpath+0x16/0x1b
But it's a false positive. Both memory_chain.rwsem and ksm_thread_mutex
have an outer lock (mem_hotplug_mutex). So they cannot deadlock.
Thus, This patch annotate ksm_thread_mutex is not deadlock source.
[akpm@linux-foundation.org: update comment, from Hugh]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KOSAKI Motohiro [Thu, 2 Dec 2010 22:31:19 +0000 (14:31 -0800)]
mem-hotplug: introduce {un}lock_memory_hotplug()
Presently hwpoison is using lock_system_sleep() to prevent a race with
memory hotplug. However lock_system_sleep() is a no-op if
CONFIG_HIBERNATION=n. Therefore we need a new lock.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Thu, 2 Dec 2010 22:31:19 +0000 (14:31 -0800)]
Documentation/filesystems/vfs.txt: fix ->repeasepage() description
->releasepage() does not remove the page from the mapping.
Acked-by: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeremy Fitzhardinge [Thu, 2 Dec 2010 22:31:18 +0000 (14:31 -0800)]
vmalloc: eagerly clear ptes on vunmap
On stock 2.6.37-rc4, running:
# mount lilith:/export /mnt/lilith
# find /mnt/lilith/ -type f -print0 | xargs -0 file
crashes the machine fairly quickly under Xen. Often it results in oops
messages, but the couple of times I tried just now, it just hung quietly
and made Xen print some rude messages:
(XEN) mm.c:2389:d80 Bad type (saw
7400000000000001 != exp
3000000000000000) for mfn 1d7058 (pfn 18fa7)
(XEN) mm.c:964:d80 Attempt to create linear p.t. with write perms
(XEN) mm.c:2389:d80 Bad type (saw
7400000000000010 != exp
1000000000000000) for mfn 1d2e04 (pfn 1d1fb)
(XEN) mm.c:2965:d80 Error while pinning mfn 1d2e04
Which means the domain tried to map a pagetable page RW, which would
allow it to map arbitrary memory, so Xen stopped it. This is because
vm_unmap_ram() left some pages mapped in the vmalloc area after NFS had
finished with them, and those pages got recycled as pagetable pages
while still having these RW aliases.
Removing those mappings immediately removes the Xen-visible aliases, and
so it has no problem with those pages being reused as pagetable pages.
Deferring the TLB flush doesn't upset Xen because it can flush the TLB
itself as needed to maintain its invariants.
When unmapping a region in the vmalloc space, clear the ptes
immediately. There's no point in deferring this because there's no
amortization benefit.
The TLBs are left dirty, and they are flushed lazily to amortize the
cost of the IPIs.
This specific motivation for this patch is an oops-causing regression
since 2.6.36 when using NFS under Xen, triggered by the NFS client's use
of vm_map_ram() introduced in
56e4ebf877b60 ("NFS: readdir with vmapped
pages") . XFS also uses vm_map_ram() and could cause similar problems.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andres Salomon [Thu, 2 Dec 2010 22:31:17 +0000 (14:31 -0800)]
cs5535-gpio: apply CS5536 errata workaround for GPIOs
The AMD Geode CS5536 Companion Device Silicon Revision B1 Specification
Update mentions the follow as issue #36:
"Atomic write transactions to the atomic GPIO High Bank Feature Bit
registers should only affect the bits selected [...]"
"after Suspend, an atomic write transaction [...] will clear all
non-selected bits of the accessed register."
In other words, writing to the high bank for a single GPIO bit will
clear every other GPIO bit (but only sometimes after a suspend).
The workaround described is obvious and simple; do a read-modify-write.
This patch does that, and documents why we're doing it.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frederic Weisbecker [Thu, 2 Dec 2010 22:31:16 +0000 (14:31 -0800)]
reiserfs: don't acquire lock recursively in reiserfs_acl_chmod
reiserfs_acl_chmod() can be called by reiserfs_set_attr() and then take
the reiserfs lock a second time. Thereafter it may call journal_begin()
that definitely requires the lock not to be nested in order to release
it before taking the journal mutex because the reiserfs lock depends on
the journal mutex already.
So, aviod nesting the lock in reiserfs_acl_chmod().
Reported-by: Pawel Zawora <pzawora@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Pawel Zawora <pzawora@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <stable@kernel.org> [2.6.32.x+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Berg [Thu, 2 Dec 2010 22:31:14 +0000 (14:31 -0800)]
leds: fix up dependencies
It's not useful to build LED triggers when there's no LEDs that can be
triggered by them. Therefore, fix up the dependencies so that this
cannot happen, and fix a few users that select triggers to depend on
LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS,
which is OK).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Arnd Hannemann <arnd@arndnet.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wu Fengguang [Thu, 2 Dec 2010 22:31:13 +0000 (14:31 -0800)]
vmstat: fix dirty threshold ordering
The nr_dirty_[background_]threshold fields are misplaced before the
numa_* fields, and users will read strange values.
This is the right order. Before patch, nr_dirty_background_threshold
will read as 0 (the value from numa_miss).
numa_hit 128501
numa_miss 0
numa_foreign 0
numa_interleave 7388
numa_local 128501
numa_other 0
nr_dirty_threshold 144291
nr_dirty_background_threshold 72145
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zeng Zhaoming [Thu, 2 Dec 2010 22:31:13 +0000 (14:31 -0800)]
mm/mempolicy.c: add rcu read lock to protect pid structure
find_task_by_vpid() should be protected by rcu_read_lock(), to prevent
free_pid() reclaiming pid.
Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dean Nelson [Thu, 2 Dec 2010 22:31:12 +0000 (14:31 -0800)]
mm/hugetlb.c: avoid double unlock_page() in hugetlb_fault()
Have hugetlb_fault() call unlock_page(page) only if it had previously
called lock_page(page).
Setting CONFIG_DEBUG_VM=y and then running the libhugetlbfs test suite,
resulted in the tripping of VM_BUG_ON(!PageLocked(page)) in
unlock_page() having been called by hugetlb_fault() when page ==
pagecache_page. This patch remedied the problem.
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 2 Dec 2010 20:59:11 +0000 (12:59 -0800)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (27 commits)
Staging: rt2870: Add USB ID for Buffalo Airstation WLI-UC-GN
staging: easycap needs smp_lock.h, fixes build error
Staging: batman-adv: ensure that eth_type_trans gets linear memory
Staging: batman-adv: Don't remove interface with spinlock held
staging: brcm80211: updated maintainers contact information
staging: fix winbond build, needs delay.h
Staging: line6: fix up my fixup for some sysfs attribute permissions
Staging: zram: fix up my fixup for some sysfs attribute permissions
Staging: udlfb: fix up my fixup for some sysfs attribute permissions
Staging: samsung-laptop: fix up my fixup for some sysfs attribute permissions
Staging: iio: adis16220: fix up my fixup for some sysfs attribute permissions
Staging: frontier: fix up my fixup for some sysfs attribute permissions
Staging: asus_oled: fix up my fixup for some sysfs attribute permissions
staging: spectra: fix build error
Staging: intel_sst: fix memory leak
Staging: rtl8712: signedness bug in init
staging: rtl8187se: Change panic to warn when RF switch turned off
staging: comedi: fix memory leak
Staging: quickstart: free after input_unregister_device()
Staging: speakup: free after input_unregister_device()
...
Linus Torvalds [Thu, 2 Dec 2010 20:58:36 +0000 (12:58 -0800)]
Merge branch 'driver-core-linus' of git://git./linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
uio: Change mail address of Hans J. Koch
driver core: prune docs about device_interface
driver core: the development tree has switched to git
Linus Torvalds [Thu, 2 Dec 2010 20:58:16 +0000 (12:58 -0800)]
Merge branch 'tty-linus' of git://git./linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
serial: mfd: adjust the baud rate setting
TTY: open/hangup race fixup
TTY: don't allow reopen when ldisc is changing
NET: wan/x25, fix ldisc->open retval
TTY: ldisc, fix open flag handling
serial8250: Mark console as CON_ANYTIME
Linus Torvalds [Thu, 2 Dec 2010 20:57:35 +0000 (12:57 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: fix autosuspend bug in usb-serial
USB: ehci: disable LPM and PPCD for nVidia MCP89 chips
USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added
USB: yurex: add .llseek fop to file_operations
USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable
usb: musb: do not use dma for control transfers
usb: musb: gadget: fix compilation warning
usb: musb: clear RXCSR_AUTOCLEAR before PIO read
usb: musb: unmap dma buffer when switching to PIO
xhci: Don't let the USB core disable SuperSpeed ports.
xhci: Setup array of USB 2.0 and USB 3.0 ports.
xhci: Fix reset-device and configure-endpoint commands
Linus Torvalds [Thu, 2 Dec 2010 20:11:31 +0000 (12:11 -0800)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: it8712f_wdt: add note to Kconfig
watchdog: gef_wdt: include fs.h
watchdog: bcm63xx_wdt: improve platform part.
watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCH
Linus Torvalds [Thu, 2 Dec 2010 20:10:56 +0000 (12:10 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB: Fix information leak in marshalling code
IB/pack: Remove some unused code added by the IBoE patches
IB/mlx4: Fix IBoE link state
IB/mlx4: Fix IBoE reported link rate
mlx4_core: Workaround firmware bug in query dev cap
IB/mlx4: Fix memory ordering of VLAN insertion control bits
MAINTAINERS: Update NetEffect entry
Linus Torvalds [Thu, 2 Dec 2010 17:13:36 +0000 (09:13 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: only run xfs_error_test if error injection is active
xfs: avoid moving stale inodes in the AIL
xfs: delayed alloc blocks beyond EOF are valid after writeback
xfs: push stale, pinned buffers on trylock failures
xfs: fix failed write truncation handling.
Takashi Iwai [Thu, 2 Dec 2010 16:33:53 +0000 (17:33 +0100)]
Merge branch 'fix/asoc' into for-linus
Takashi Iwai [Thu, 2 Dec 2010 16:31:18 +0000 (17:31 +0100)]
Merge branch 'for-2.6.37' of git://git./linux/kernel/git/lrg/asoc-2.6 into fix/asoc
Takashi Iwai [Thu, 2 Dec 2010 16:14:50 +0000 (17:14 +0100)]
Merge branch 'fix/hda' into for-linus
Linus Torvalds [Thu, 2 Dec 2010 16:06:16 +0000 (08:06 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: fix kernel-doc for set_consumer_device_supply
regulator: enable supply regulator only when use count is zero
regulator: twl-regulator - fix twlreg_set_mode
regulator: lock supply in regulator enable
regulator: Return proper error for regulator_register()
regulator: Ensure enough delay time for enabling regulator
regulator: Remove a redundant device_remove_file call in create_regulator
regulator: Staticise mc13783_powermisc_rmw()
regulator: regulator disable supply fix
Linus Torvalds [Thu, 2 Dec 2010 16:05:56 +0000 (08:05 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions
[media] v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev* (2)
Linus Torvalds [Thu, 2 Dec 2010 16:05:22 +0000 (08:05 -0800)]
Merge branch 'rbd-sysfs' of git://git./linux/kernel/git/sage/ceph-client
* 'rbd-sysfs' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: replace the rbd sysfs interface
Linus Torvalds [Thu, 2 Dec 2010 16:04:21 +0000 (08:04 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix parsing of hostname in dfs referrals
cifs: display fsc in /proc/mounts
cifs: enable fscache iff fsc mount option is used explicitly
cifs: allow fsc mount option only if CONFIG_CIFS_FSCACHE is set
cifs: Handle extended attribute name cifs_acl to generate cifs acl blob (try #4)
cifs: Misc. cleanup in cifsacl handling [try #4]
cifs: trivial comment fix for cifs_invalidate_mapping
[CIFS] fs/cifs/Kconfig: CIFS depends on CRYPTO_HMAC
cifs: don't take extra tlink reference in initiate_cifs_search
cifs: Percolate error up to the caller during get/set acls [try #4]
cifs: fix another memleak, in cifs_root_iget
cifs: fix potential use-after-free in cifs_oplock_break_put
Wim Van Sebroeck [Thu, 2 Dec 2010 14:03:29 +0000 (14:03 +0000)]
watchdog: it8712f_wdt: add note to Kconfig
On some motherboards the it8712f watchdog does not work unless
the game port was enabled. see Bug 13140. We therefor add a note
to Kconfig.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wolfram Sang & Martyn Welch [Wed, 1 Dec 2010 23:11:16 +0000 (00:11 +0100)]
watchdog: gef_wdt: include fs.h
Add missing include "linux/fs.h".
This fixes compile failure.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Sat, 23 Oct 2010 20:59:42 +0000 (20:59 +0000)]
watchdog: bcm63xx_wdt: improve platform part.
* fix devinit and devexit sections
* fix platform removal code so that the iounmap happens after the removal of the timer.
* changes the reboot_notifier by a platform shutdown method.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Seth Heasley [Wed, 17 Nov 2010 19:15:08 +0000 (12:15 -0700)]
watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCH
This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH for TCO Watchdog.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Jarkko Nikula [Wed, 1 Dec 2010 09:01:20 +0000 (11:01 +0200)]
ASoC: omap: N810: Don't select CONFIG_OMAP_MUX but make it as dependency
Not all omap boards use kernel based pin multiplexing so
CONFIG_SND_OMAP_SOC_N810 should not select it by default as it can make
harm to other boards in multi-board kernels.
Therefore put CONFIG_OMAP_MUX as a dependency to N810 ASoC machine driver.
Thanks to Tony Lindgren <tony@atomide.com> for noticing.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Dmitry Torokhov [Thu, 2 Dec 2010 10:49:06 +0000 (11:49 +0100)]
HID: length resolution should be reported units/mm
Input ABI requires reporting resolution on main axes in units per
millimeter, not units per inch, so we need to convert accordingly.
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Daniel T Chen [Thu, 2 Dec 2010 00:16:07 +0000 (19:16 -0500)]
ALSA: hda: Use "alienware" model quirk for another SSID
BugLink: https://launchpad.net/bugs/683695
The original reporter states that headphone jacks do not appear to
work. Upon inspecting his codec dump, and upon further testing, it is
confirmed that the "alienware" model quirk is correct.
Reported-and-tested-by: Cody Thierauf
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Roland Dreier [Thu, 2 Dec 2010 00:33:47 +0000 (16:33 -0800)]
Merge branches 'misc', 'mlx4' and 'nes' into for-next
Vasiliy Kulikov [Sun, 14 Nov 2010 09:22:52 +0000 (09:22 +0000)]
IB: Fix information leak in marshalling code
ib_ucm_init_qp_attr() and ucma_init_qp_attr() pass struct ib_uverbs_qp_attr
with reserved, qp_state, {ah_attr,alt_ah_attr}{reserved,->grh.reserved}
fields uninitialized to copy_to_user(). This leads to leaking of
contents of kernel stack memory to userspace.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Or Gerlitz [Mon, 29 Nov 2010 07:20:50 +0000 (07:20 +0000)]
IB/pack: Remove some unused code added by the IBoE patches
Remove unused functions added by commit
ff7f5aab354d ("IB/pack: IBoE UD
packet packing support").
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Eli Cohen [Thu, 11 Nov 2010 21:05:58 +0000 (21:05 +0000)]
IB/mlx4: Fix IBoE link state
Use netif_running() and netif_carrier_ok() to report link state,
exactly as is done to report Ethernet link state in sysfs.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Eli Cohen [Mon, 15 Nov 2010 14:04:39 +0000 (14:04 +0000)]
IB/mlx4: Fix IBoE reported link rate
The link rate is the product of the link speed in the link width. For
Etherent ports the rate is 10G, so we use 1 for the width and 4 for
speed to get the correct rate.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Eli Cohen [Wed, 10 Nov 2010 12:52:37 +0000 (12:52 +0000)]
mlx4_core: Workaround firmware bug in query dev cap
ConnectX firmware is supposed to report the number blue flame
registers per page as log2 of the value. However, due to a firmware
bug, it reports actual number. This patch works around this by
checking if the number of registers calculated fits within a page. If
it does not, we use 8 registers per page.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Yehuda Sadeh [Fri, 19 Nov 2010 22:51:04 +0000 (14:51 -0800)]
rbd: replace the rbd sysfs interface
The new interface creates directories per mapped image
and under each it creates a subdir per available snapshot.
This allows keeping a cleaner interface within the sysfs
guidelines. The ABI documentation was updated too.
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Eli Cohen [Wed, 17 Nov 2010 13:39:43 +0000 (13:39 +0000)]
IB/mlx4: Fix memory ordering of VLAN insertion control bits
We must fully update the control segment before marking it as valid,
so that hardware doesn't start executing it before we're ready.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
[ Move VLAN control bit setting to before wmb(). - Roland ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Chien Tung [Tue, 2 Nov 2010 16:29:54 +0000 (16:29 +0000)]
MAINTAINERS: Update NetEffect entry
Correct web link as www.neteffect.com is no longer valid. Remove
Chien Tung as maintainer. I am moving on to other responsibilities at
Intel. Thanks for all the fish.
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dave Chinner [Tue, 30 Nov 2010 04:15:31 +0000 (15:15 +1100)]
xfs: only run xfs_error_test if error injection is active
Recent tests writing lots of small files showed the flusher thread
being CPU bound and taking a long time to do allocations on a debug
kernel. perf showed this as the prime reason:
samples pcnt function DSO
_______ _____ ___________________________ _________________
224648.00 36.8% xfs_error_test [kernel.kallsyms]
86045.00 14.1% xfs_btree_check_sblock [kernel.kallsyms]
39778.00 6.5% prandom32 [kernel.kallsyms]
37436.00 6.1% xfs_btree_increment [kernel.kallsyms]
29278.00 4.8% xfs_btree_get_rec [kernel.kallsyms]
27717.00 4.5% random32 [kernel.kallsyms]
Walking btree blocks during allocation checking them requires each
block (a cache hit, so no I/O) call xfs_error_test(), which then
does a random32() call as the first operation. IOWs, ~50% of the
CPU is being consumed just testing whether we need to inject an
error, even though error injection is not active.
Kill this overhead when error injection is not active by adding a
global counter of active error traps and only calling into
xfs_error_test when fault injection is active.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dave Chinner [Tue, 30 Nov 2010 04:15:46 +0000 (15:15 +1100)]
xfs: avoid moving stale inodes in the AIL
When an inode has been marked stale because the cluster is being
freed, we don't want to (re-)insert this inode into the AIL. There
is a race condition where the cluster buffer may be unpinned before
the inode is inserted into the AIL during transaction committed
processing. If the buffer is unpinned before the inode item has been
committed and inserted, then it is possible for the buffer to be
released and hence processthe stale inode callbacks before the inode
is inserted into the AIL.
In this case, we then insert a clean, stale inode into the AIL which
will never get removed by an IO completion. It will, however, get
reclaimed and that triggers an assert in xfs_inode_free()
complaining about freeing an inode still in the AIL.
This race can be avoided by not moving stale inodes forward in the AIL
during transaction commit completion processing. This closes the
race condition by ensuring we never insert clean stale inodes into
the AIL. It is safe to do this because a dirty stale inode, by
definition, must already be in the AIL.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dave Chinner [Tue, 30 Nov 2010 04:16:02 +0000 (15:16 +1100)]
xfs: delayed alloc blocks beyond EOF are valid after writeback
There is an assumption in the parts of XFS that flushing a dirty
file will make all the delayed allocation blocks disappear from an
inode. That is, that after calling xfs_flush_pages() then
ip->i_delayed_blks will be zero.
This is an invalid assumption as we may have specualtive
preallocation beyond EOF and they are recorded in
ip->i_delayed_blks. A flush of the dirty pages of an inode will not
change the state of these blocks beyond EOF, so a non-zero
deeelalloc block count after a flush is valid.
The bmap code has an invalid ASSERT() that needs to be removed, and
the swapext code has a bug in that while it swaps the data forks
around, it fails to swap the i_delayed_blks counter associated with
the fork and hence can get the block accounting wrong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dave Chinner [Tue, 30 Nov 2010 04:16:16 +0000 (15:16 +1100)]
xfs: push stale, pinned buffers on trylock failures
As reported by Nick Piggin, XFS is suffering from long pauses under
highly concurrent workloads when hosted on ramdisks. The problem is
that an inode buffer is stuck in the pinned state in memory and as a
result either the inode buffer or one of the inodes within the
buffer is stopping the tail of the log from being moved forward.
The system remains in this state until a periodic log force issued
by xfssyncd causes the buffer to be unpinned. The main problem is
that these are stale buffers, and are hence held locked until the
transaction/checkpoint that marked them state has been committed to
disk. When the filesystem gets into this state, only the xfssyncd
can cause the async transactions to be committed to disk and hence
unpin the inode buffer.
This problem was encountered when scaling the busy extent list, but
only the blocking lock interface was fixed to solve the problem.
Extend the same fix to the buffer trylock operations - if we fail to
lock a pinned, stale buffer, then force the log immediately so that
when the next attempt to lock it comes around, it will have been
unpinned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dave Chinner [Tue, 30 Nov 2010 04:14:39 +0000 (15:14 +1100)]
xfs: fix failed write truncation handling.
Since the move to the new truncate sequence we call xfs_setattr to
truncate down excessively instanciated blocks. As shown by the testcase
in kernel.org BZ #22452 that doesn't work too well. Due to the confusion
of the internal inode size, and the VFS inode i_size it zeroes data that
it shouldn't.
But full blown truncate seems like overkill here. We only instanciate
delayed allocations in the write path, and given that we never released
the iolock we can't have converted them to real allocations yet either.
The only nasty case is pre-existing preallocation which we need to skip.
We already do this for page discard during writeback, so make the delayed
allocation block punching a generic function and call it from the failed
write path as well as xfs_aops_discard_page. The callers are
responsible for ensuring that partial blocks are not truncated away,
and that they hold the ilock.
Based on a fix originally from Christoph Hellwig. This version used
filesystem blocks as the range unit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dimitris Papastamos [Wed, 1 Dec 2010 09:38:55 +0000 (09:38 +0000)]
ASoC: WM8731: Fix incorrect mask for bypass path disable
According to the datasheet the bypass path enable/disable is
bit 3 therefore we need 0x8 and not 0x4.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Daniel Drake [Tue, 30 Nov 2010 20:34:52 +0000 (20:34 +0000)]
lxfb: Maintain video processor palette through suspend/resume
The Geode X driver uses both of the LX's palettes, one for gamma
correction and one for colormaps.
The kernel driver currently only backs up the one used for colormaps
during suspend/resume. If you mess with gamma settings and do a
suspend/resume, colors go funny.
Fix this by backing up the video proc palette during suspend/resume,
alongside the display controller one which is already handled.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Caglar Akyuz [Tue, 30 Nov 2010 20:04:14 +0000 (20:04 +0000)]
video: da8xx: Register IRQ as last thing in driver probing.
Following commit exposed a bug in driver:
"fbdev: da8xx/omap-l1xx: implement double buffering"
Bug is, if interrupt handler is called before initialization is
finished, raster controller is enabled and following register
modifications causes hardware to stay in a broken state.
By looking at this one may say that proper locking is missing in
this driver, and a more proper fix should be prepared. However,
aformentioned commit causes a regression in the driver and some
fix to current one should be applied first.
Signed-off-by: Caglar Akyuz <caglar@bilkon-kontrol.com.tr>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Wed, 1 Dec 2010 07:39:08 +0000 (16:39 +0900)]
Merge branch 'sh/cachetlb' into sh-fixes-for-linus
Paul Mundt [Wed, 1 Dec 2010 06:39:51 +0000 (15:39 +0900)]
sh: Assume new page cache pages have dirty dcache lines.
This follows the ARM change
c01778001a4f5ad9c62d882776235f3f31922fdd
("ARM: 6379/1: Assume new page cache pages have dirty D-cache") for the
same rationale:
There are places in Linux where writes to newly allocated page
cache pages happen without a subsequent call to flush_dcache_page()
(several PIO drivers including USB HCD). This patch changes the
meaning of PG_arch_1 to be PG_dcache_clean and always flush the
D-cache for a newly mapped page in update_mmu_cache().
This addresses issues seen with executing binaries from MMC, in
addition to some of the other HCDs that don't explicitly do cache
management for their pipe-in buffers.
Requested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Wed, 1 Dec 2010 04:13:35 +0000 (20:13 -0800)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: add workaround for dce3 ddc line vbios bug
drm/radeon/kms: fix interlaced and doublescan handling
drm/radeon/kms: fix typos in disabled vbios code
Revert "drm/i915/dp: use VBT provided eDP params if available"
drm/i915: Clear pfit registers when not used by any outputs
drm: record monitor status in output_poll_execute
drm: Set connector DPMS status to ON in drm_crtc_helper_set_config
drm/i915: fix regression due to
ba3d8d749b01548b9
Revert "drm/radeon/kms: fix typo in r600 cs checker"
drm/i915/sdvo: Always add a 30ms delay to make SDVO TV detection reliable
MAINTAINERS: INTEL DRM DRIVERS list (intel-gfx) is subscribers-only
drm/i915/sdvo: Always fallback to querying the shared DDC line
drm/i915: Handle pagefaults in execbuffer user relocations
drm/i915/sdvo: Only enable HDMI encodings only if the commandset is supported
drm/radeon/kms: fix resume regression for some r5xx laptops
drm/radeon/kms: fix regression in rs4xx i2c setup
drm/i915: Only save/restore cursor regs if !KMS
drm/i915: Prevent integer overflow when validating the execbuffer
Alex Deucher [Tue, 30 Nov 2010 05:15:10 +0000 (00:15 -0500)]
drm/radeon/kms: add workaround for dce3 ddc line vbios bug
fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=23752
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc:stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 30 Nov 2010 20:46:47 +0000 (15:46 -0500)]
drm/radeon/kms: fix interlaced and doublescan handling
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 1 Dec 2010 00:11:45 +0000 (19:11 -0500)]
drm/radeon/kms: fix typos in disabled vbios code
6xx/7xx was hitting the wrong BUS_CNTL reg and bits.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 1 Dec 2010 02:10:34 +0000 (12:10 +1000)]
Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixes
* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
Revert "drm/i915/dp: use VBT provided eDP params if available"
drm/i915: Clear pfit registers when not used by any outputs
drm/i915: fix regression due to
ba3d8d749b01548b9
Linus Torvalds [Wed, 1 Dec 2010 01:57:57 +0000 (17:57 -0800)]
Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91:
at91/board-yl-9200: fix typo in video support
atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'
at91/picotux200: remove commenting usb device and dataflash support
at91: rename rm9200ek and rm9200dk board file name
at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used
at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used
at91: Convert remaining boards to new-style UART initialization
at91: merge all at91rm9200 defconfig in one single file
Oleg Nesterov [Tue, 30 Nov 2010 19:56:02 +0000 (20:56 +0100)]
exec: copy-and-paste the fixes into compat_do_execve() paths
Note: this patch targets 2.6.37 and tries to be as simple as possible.
That is why it adds more copy-and-paste horror into fs/compat.c and
uglifies fs/exec.c, this will be cleanuped later.
compat_copy_strings() plays with bprm->vma/mm directly and thus has
two problems: it lacks the RLIMIT_STACK check and argv/envp memory
is not visible to oom killer.
Export acct_arg_size() and get_arg_page(), change compat_copy_strings()
to use get_arg_page(), change compat_do_execve() to do acct_arg_size(0)
as do_execve() does.
Add the fatal_signal_pending/cond_resched checks into compat_count() and
compat_copy_strings(), this matches the code in fs/exec.c and certainly
makes sense.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Tue, 30 Nov 2010 19:55:34 +0000 (20:55 +0100)]
exec: make argv/envp memory visible to oom-killer
Brad Spengler published a local memory-allocation DoS that
evades the OOM-killer (though not the virtual memory RLIMIT):
http://www.grsecurity.net/~spender/64bit_dos.c
execve()->copy_strings() can allocate a lot of memory, but
this is not visible to oom-killer, nobody can see the nascent
bprm->mm and take it into account.
With this patch get_arg_page() increments current's MM_ANONPAGES
counter every time we allocate the new page for argv/envp. When
do_execve() succeds or fails, we change this counter back.
Technically this is not 100% correct, we can't know if the new
page is swapped out and turn MM_ANONPAGES into MM_SWAPENTS, but
I don't think this really matters and everything becomes correct
once exec changes ->mm or fails.
Reported-by: Brad Spengler <spender@grsecurity.net>
Reviewed-and-discussed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Feng Tang [Fri, 19 Nov 2010 03:01:48 +0000 (11:01 +0800)]
serial: mfd: adjust the baud rate setting
Previous baud rate setting code only has been tested with 3.5M/9600/
115200/230400/460800 bps, and recently we got a 3M bps device to test,
which needs to modify current MUL register setting, and with this
patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a MUL
value scale down from 3M's.
Also got some reference register setting from silicon guys for
different baud rates, which tries to keep the pre-scalar register value
to 16.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 30 Nov 2010 23:52:04 +0000 (15:52 -0800)]
Merge branch 'for-greg' of git://gitorious.org/usb/usb into work
Greg Kroah-Hartman [Tue, 30 Nov 2010 23:38:41 +0000 (15:38 -0800)]
Merge branch 'for-usb-linus' of git://git./linux/kernel/git/sarah/xhci into work
Jeff Layton [Tue, 30 Nov 2010 20:14:48 +0000 (15:14 -0500)]
cifs: fix parsing of hostname in dfs referrals
The DFS referral parsing code does a memchr() call to find the '\\'
delimiter that separates the hostname in the referral UNC from the
sharename. It then uses that value to set the length of the hostname via
pointer subtraction. Instead of subtracting the start of the hostname
however, it subtracts the start of the UNC, which causes the code to
pass in a hostname length that is 2 bytes too long.
Regression introduced in commit
1a4240f4.
Reported-and-Tested-by: Robbert Kouprie <robbert@exx.nl>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Wang Lei <wang840925@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Steve French <sfrench@us.ibm.com>
Alan Stern [Mon, 29 Nov 2010 15:17:22 +0000 (10:17 -0500)]
USB: fix autosuspend bug in usb-serial
This patch (as1437) fixes a bug in the usb-serial autosuspend
handling. Since the usb-serial core now has autosuspend support, it
must set the .supports_autosuspend member in every serial driver it
registers. Otherwise the usb_autopm_get_interface() call won't work.
This fixes Bugzilla #23012.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable@kernel.org
Reported-by: Kevin Smith <thirdwiggin@gmail.com>
Reported-and-tested-by: Simon Gerber <gesimu@gmail.com>
Reported-and-tested-by: Matteo Croce <matteo@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brian J. Tarricone [Mon, 22 Nov 2010 05:15:52 +0000 (21:15 -0800)]
USB: ehci: disable LPM and PPCD for nVidia MCP89 chips
Tested on MacBookAir3,1. Without this, we get EPROTO errors when
fetching device config descriptors.
Signed-off-by: Brian Tarricone <brian@tarricone.org>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Tested-by: Edgar Hucek <gimli@dark-green.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jacques Viviers [Wed, 24 Nov 2010 09:56:38 +0000 (11:56 +0200)]
USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added
Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485
converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001.
This should also work with the stable branches for:
2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36
Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomoki Sekiyama [Mon, 22 Nov 2010 10:29:23 +0000 (19:29 +0900)]
USB: yurex: add .llseek fop to file_operations
Default llseek operation behavior was changed by the patch named
"vfs: make no_llseek the default" after the yurex driver had been merged,
so the llseek to yurex is now ignored.
This patch add llseek fop with default_llseek to yurex driver
to catch up to the change.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Stuermer [Wed, 17 Nov 2010 23:45:43 +0000 (00:45 +0100)]
USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable
Another variant of the RT Systems programming cable for ham radios.
Signed-off-by: Michael Stuermer <ms@mallorn.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trond Myklebust [Tue, 30 Nov 2010 17:42:34 +0000 (12:42 -0500)]
NFS: Fix a readdirplus bug
When comparing filehandles in the helper nfs_same_file(), we should not be
using 'strncmp()': filehandles are not null terminated strings.
Instead, we should just use the existing helper nfs_compare_fh().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 21 Nov 2010 03:24:07 +0000 (11:24 +0800)]
at91/board-yl-9200: fix typo in video support
for the epson frambuffer support it's CONFIG_FB_S1D13XXX
not CONFIG_FB_S1D135XX
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 20 Nov 2010 06:52:53 +0000 (14:52 +0800)]
atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'
passing argument 2 of 'dma_map_single' discards qualifiers from pointer target type
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 21 Nov 2010 02:31:19 +0000 (10:31 +0800)]
at91/picotux200: remove commenting usb device and dataflash support
as based on http://www.picotux.com/pt200/picotux200.pdf
these board does not have such I/O
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 19 Nov 2010 14:34:38 +0000 (22:34 +0800)]
at91: rename rm9200ek and rm9200dk board file name
to be a few more concistant with the other boards
as ek is for evaluation kit and dk for development kit
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 19 Nov 2010 14:31:35 +0000 (22:31 +0800)]
at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 19 Nov 2010 14:31:03 +0000 (22:31 +0800)]
at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 19 Nov 2010 14:23:28 +0000 (22:23 +0800)]
at91: Convert remaining boards to new-style UART initialization
Convert the following AT91RM9200-based boards to the new-style UART
initialization:
- Ajeco 1ARM Single Board Computer
- Sperry-Sun KAFA board
- picotux 200
Remove the deprecated at91_init_serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Randy Dunlap [Thu, 18 Nov 2010 23:02:26 +0000 (15:02 -0800)]
regulator: fix kernel-doc for set_consumer_device_supply
Fix kernel-doc warning for set_consumer_device_supply():
Warning(drivers/regulator/core.c:912): missing initial short description on line:
* set_consumer_device_supply: Bind a regulator to a symbolic supply
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Bengt Jonsson [Wed, 10 Nov 2010 10:06:22 +0000 (11:06 +0100)]
regulator: enable supply regulator only when use count is zero
Supply regulators are disabled only when the last
reference count is removed on the child regulator
(the use count goes from 1 to 0). This patch changes
the behaviour of enable so the supply regulator is
enabled only when the use count of the child
regulator goes from 0 to 1.
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Axel Lin [Fri, 22 Oct 2010 08:38:22 +0000 (16:38 +0800)]
regulator: twl-regulator - fix twlreg_set_mode
The Singular Message is 16 bits:
DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
Current implementation return immedially after sucessfuly write MSB part.
To properly set mode, we need to write the complete message ( MSB and LSB ).
In twl.h, now we have defines for PM Master module register offsets,
use it instead of hard coded 0x15/0x16.
Use "message & 0xff" to ensure we send correct value for LSB.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Lesly Arackal Manuel <leslyam@ti.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mattias Wallin [Thu, 4 Nov 2010 10:01:31 +0000 (11:01 +0100)]
regulator: lock supply in regulator enable
This patch add locks around regulator supply enable.
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Axel Lin [Fri, 5 Nov 2010 07:27:17 +0000 (15:27 +0800)]
regulator: Return proper error for regulator_register()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Axel Lin [Fri, 5 Nov 2010 13:51:32 +0000 (21:51 +0800)]
regulator: Ensure enough delay time for enabling regulator
Integer division will truncate the result, this patch ensures we have
enough delay time for enabling regulator.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Axel Lin [Fri, 5 Nov 2010 07:25:12 +0000 (15:25 +0800)]
regulator: Remove a redundant device_remove_file call in create_regulator
We already have device_remove_file() in error path,
no need to call it before goto link_name_err.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mark Brown [Wed, 3 Nov 2010 04:08:04 +0000 (00:08 -0400)]
regulator: Staticise mc13783_powermisc_rmw()
It is not used outside this driver so no need to make the symbol global.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Mattias Wallin [Tue, 2 Nov 2010 13:55:34 +0000 (14:55 +0100)]
regulator: regulator disable supply fix
This patch fixes a disable failure when regulator supply is used.
A while loop in regulator disable checks for supply pointer != NULL
but the pointer is not always updated, resulting in the while loop
running too many times causing a disable failure.
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Daniel Glöckner [Tue, 30 Nov 2010 00:00:18 +0000 (01:00 +0100)]
s6105-ipcam: fix compilation
When the s6105-ipcam ASoC driver had been converted to the
multi-component API, a single reference to a former structure
element remained, blocking successful compilation.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Daniel Glöckner [Tue, 30 Nov 2010 00:00:17 +0000 (01:00 +0100)]
s6000-pcm: fix compilation
s6000_soc_platform has lost its forward declaration and there no
longer is a name element in it, so use a string constant when
calling request_irq.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>