OSDN Git Service
Pravin Shedge [Mon, 11 Dec 2017 16:39:46 +0000 (22:09 +0530)]
net: remove duplicate includes
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 11 Dec 2017 15:17:39 +0000 (07:17 -0800)]
ipv4: igmp: guard against silly MTU values
IPv4 stack reacts to changes to small MTU, by disabling itself under
RTNL.
But there is a window where threads not using RTNL can see a wrong
device mtu. This can lead to surprises, in igmp code where it is
assumed the mtu is suitable.
Fix this by reading device mtu once and checking IPv4 minimal MTU.
This patch adds missing IPV4_MIN_MTU define, to not abuse
ETH_MIN_MTUÂ anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 11 Dec 2017 15:03:38 +0000 (07:03 -0800)]
ipv6: mcast: better catch silly mtu values
syzkaller reported crashes in IPv6 stack [1]
Xin Long found that lo MTU was set to silly values.
IPv6 stack reacts to changes to small MTU, by disabling itself under
RTNL.
But there is a window where threads not using RTNL can see a wrong
device mtu. This can lead to surprises, in mld code where it is assumed
the mtu is suitable.
Fix this by reading device mtu once and checking IPv6 minimal MTU.
[1]
skbuff: skb_over_panic: text:
0000000010b86b8d len:196 put:20
head:
000000003b477e60 data:
000000000e85441e tail:0xd4 end:0xc0 dev:lo
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:104!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100
RSP: 0018:
ffff8801db307508 EFLAGS:
00010286
RAX:
0000000000000082 RBX:
ffff8801c517e840 RCX:
0000000000000000
RDX:
0000000000000082 RSI:
1ffff1003b660e61 RDI:
ffffed003b660e95
RBP:
ffff8801db307570 R08:
1ffff1003b660e23 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffffffff85bd4020
R13:
ffffffff84754ed2 R14:
0000000000000014 R15:
ffff8801c4e26540
FS:
0000000000000000(0000) GS:
ffff8801db300000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000463610 CR3:
00000001c6698000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<IRQ>
skb_over_panic net/core/skbuff.c:109 [inline]
skb_put+0x181/0x1c0 net/core/skbuff.c:1694
add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695
add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817
mld_send_cr net/ipv6/mcast.c:1903 [inline]
mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448
call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320
expire_timers kernel/time/timer.c:1357 [inline]
__run_timers+0x7e1/0xb60 kernel/time/timer.c:1660
run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686
__do_softirq+0x29d/0xbb2 kernel/softirq.c:285
invoke_softirq kernel/softirq.c:365 [inline]
irq_exit+0x1d3/0x210 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:540 [inline]
smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Mon, 11 Dec 2017 08:54:09 +0000 (09:54 +0100)]
Revert "ravb: add workaround for clock when resuming with WoL enabled"
This reverts commit
fbf3d034f2ff6264183cfa6845770e8cc2a986c8.
As of commit
560869100b99a3da ("clk: renesas: cpg-mssr: Restore module
clocks during resume"), the workaround is no longer needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Paasch [Mon, 11 Dec 2017 08:05:46 +0000 (00:05 -0800)]
tcp md5sig: Use skb's saddr when replying to an incoming segment
The MD5-key that belongs to a connection is identified by the peer's
IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying
to an incoming segment from tcp_check_req() that failed the seq-number
checks.
Thus, to find the correct key, we need to use the skb's saddr and not
the daddr.
This bug seems to have been there since quite a while, but probably got
unnoticed because the consequences are not catastrophic. We will call
tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer,
thus the connection doesn't really fail.
Fixes:
9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 10 Dec 2017 08:56:00 +0000 (16:56 +0800)]
fou: fix some member types in guehdr
guehdr struct is used to build or parse gue packets, which
are always in big endian. It's better to define all guehdr
members as __beXX types.
Also, in validate_gue_flags it's not good to use a __be32
variable for both Standard flags(__be16) and Private flags
(__be32), and pass it to other funcions.
This patch could fix a bunch of sparse warnings from fou.
Fixes:
5024c33ac354 ("gue: Add infrastructure for flags and options")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 10 Dec 2017 07:40:51 +0000 (15:40 +0800)]
sctp: make sure stream nums can match optlen in sctp_setsockopt_reset_streams
Now in sctp_setsockopt_reset_streams, it only does the check
optlen < sizeof(*params) for optlen. But it's not enough, as
params->srs_number_streams should also match optlen.
If the streams in params->srs_stream_list are less than stream
nums in params->srs_number_streams, later when dereferencing
the stream list, it could cause a slab-out-of-bounds crash, as
reported by syzbot.
This patch is to fix it by also checking the stream numbers in
sctp_setsockopt_reset_streams to make sure at least it's not
greater than the streams in the list.
Fixes:
7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mohamed Ghannam [Sun, 10 Dec 2017 03:50:58 +0000 (03:50 +0000)]
net: ipv4: fix for a race condition in raw_sendmsg
inet->hdrincl is racy, and could lead to uninitialized stack pointer
usage, so its value should be read only once.
Fixes:
c008ba5bdc9f ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt")
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Cernekee [Wed, 6 Dec 2017 20:12:27 +0000 (12:12 -0800)]
netlink: Add netns check on taps
Currently, a nlmon link inside a child namespace can observe systemwide
netlink activity. Filter the traffic so that nlmon can only sniff
netlink messages from its own netns.
Test case:
vpnns -- bash -c "ip link add nlmon0 type nlmon; \
ip link set nlmon0 up; \
tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" &
sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \
spi 0x1 mode transport \
auth sha1 0x6162633132330000000000000000000000000000 \
enc aes 0x00000000000000000000000000000000
grep --binary abc123 /tmp/nlmon.pcap
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Fri, 8 Dec 2017 15:35:40 +0000 (16:35 +0100)]
net: sh_eth: do not advertise Gigabit capabilities when not available
Not all variants of the sh_eth hardware have Gigabit
support. Unfortunately, the current driver doesn't tell the PHY about
the limited MAC capabilities. Due to this, if you have a Gigabit
capable PHY, the PHY will advertise its Gigabit capability and
establish a link at 1Gbit/s, even though the MAC doesn't support it.
In order to avoid this, we use the recently introduced
phy_set_max_speed() to tell the PHY to not advertise speed higher than
100 MBit/s.
Tested on a SH7786 platform, with a Gigabit PHY.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jerome Brunet [Fri, 8 Dec 2017 11:08:11 +0000 (12:08 +0100)]
net: phy: meson-gxl: detect LPA corruption
The purpose of this change is to fix the incorrect detection of the link
partner (LP) advertised capabilities which sometimes happens with this PHY
(roughly 1 time in a dozen)
This issue may cause the link to be negotiated at 10Mbps/Full or
10Mbps/Half when 100MBps/Full is actually possible. In some case, the link
is even completely broken and no communication is possible.
To detect the corruption, we must look for a magic undocumented bit in the
WOL bank (hint given by the SoC vendor kernel) but this is not enough to
cover all cases. We also have to look at the LPA ack. If the LP supports
Aneg but did not ack our base code when aneg is completed, we assume
something went wrong.
The detection of a corrupted LPA triggers a restart of the aneg process.
This solves the problem but may take up to 6 retries to complete.
Fixes:
7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael S. Tsirkin [Tue, 5 Dec 2017 19:29:37 +0000 (21:29 +0200)]
ptr_ring: add barriers
Users of ptr_ring expect that it's safe to give the
data structure a pointer and have it be available
to consumers, but that actually requires an smb_wmb
or a stronger barrier.
In absence of such barriers and on architectures that reorder writes,
consumer might read an un=initialized value from an skb pointer stored
in the skb array. This was observed causing crashes.
To fix, add memory barriers. The barrier we use is a wmb, the
assumption being that producers do not need to read the value so we do
not need to order these reads.
Reported-by: George Cherian <george.cherian@cavium.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 11 Dec 2017 14:39:14 +0000 (09:39 -0500)]
Merge tag 'mac80211-for-davem-2017-12-11' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Three fixes:
* for certificate C file generation, don't use hexdump as it's
not always installed by default, use pure posix instead (od/sed)
* for certificate C file generation, don't write the file if
anything fails, so the build abort will not cause a bad build
upon a second attempt
* fix locking in ieee80211_sta_tear_down_BA_sessions() which had
been causing lots of locking warnings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Sat, 9 Dec 2017 20:10:10 +0000 (21:10 +0100)]
mac80211: fix locking in ieee80211_sta_tear_down_BA_sessions
Due to overlap between
commit
1281103770e9 ("mac80211: Simplify locking in ieee80211_sta_tear_down_BA_sessions()")
and the way that Luca modified
commit
72e2c3438ba3 ("mac80211: tear down RX aggregations first")
when sending it upstream from Intel's internal tree, we get
the following warning:
WARNING: CPU: 0 PID: 5472 at net/mac80211/agg-tx.c:315 ___ieee80211_stop_tx_ba_session+0x158/0x1f0
since there's no appropriate locking around the call to
___ieee80211_stop_tx_ba_session; Sara's original just had
a call to the locked __ieee80211_stop_tx_ba_session (one
less underscore) but it looks like Luca modified both of
the calls when fixing it up for upstream, leading to the
problem at hand.
Move the locking appropriately to fix this problem.
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Michal Hocko [Wed, 6 Dec 2017 10:27:57 +0000 (11:27 +0100)]
kmemcheck: rip it out for real
Commit
4675ff05de2d ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place. This looks like a rebase
mistake in the mmotm tree or the merge mistake. Let's drop those
leftovers as well.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 8 Dec 2017 21:32:44 +0000 (13:32 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
Linus Torvalds [Fri, 8 Dec 2017 21:18:47 +0000 (13:18 -0800)]
Merge tag 'media/v4.15-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the media subsytem:
- The largest amount of fixes in this series is with regards to
comments that aren't kernel-doc, but start with "/**".
A new check added for 4.15 makes it to produce a *huge* amount of
new warnings (I'm compiling here with W=1). Most of the patches in
this series fix those.
No code changes - just comment changes at the source files
- rc: some fixed in order to better handle RC repetition codes
- v4l-async: use the v4l2_dev from the root notifier when matching
sub-devices
- v4l2-fwnode: Check subdev count after checking port
- ov 13858 and et8ek8: compilation fix with randconfigs
- usbtv: a trivial new USB ID addition
- dibusb-common: don't do DMA on stack on firmware load
- imx274: Fix error handling, add MAINTAINERS entry
- sir_ir: detect presence of port"
* tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits)
media: imx274: Fix error handling, add MAINTAINERS entry
media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices
media: v4l2-fwnode: Check subdev count after checking port
media: et8ek8: select V4L2_FWNODE
media: ov13858: Select V4L2_FWNODE
media: rc: partial revert of "media: rc: per-protocol repeat period"
media: dvb: i2c transfers over usb cannot be done from stack
media: dvb-frontends: complete kernel-doc markups
media: docs: add documentation for frontend attach info
media: dvb_frontends: fix kernel-doc macros
media: drivers: remove "/**" from non-kernel-doc comments
media: lm3560: add a missing kernel-doc parameter
media: rcar_jpu: fix two kernel-doc markups
media: vsp1: add a missing kernel-doc parameter
media: soc_camera: fix a kernel-doc markup
media: mt2063: fix some kernel-doc warnings
media: radio-wl1273: fix a parameter name at kernel-doc macro
media: s3c-camif: add missing description at s3c_camif_find_format()
media: mtk-vpu: add description for wdt fields at struct mtk_vpu
media: vdec: fix some kernel-doc warnings
...
Linus Torvalds [Fri, 8 Dec 2017 21:11:57 +0000 (13:11 -0800)]
Merge tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This pull is a bit larger than I'd like but a large bunch of it is
license fixes, AMD wanted to fix the licenses for a bunch of files
that were missing them,
Otherwise a bunch of TTM regression fix since the hugepage support,
some i915 and gvt fixes, a core connector free in a safe context fix,
and one bridge fix"
* tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux: (26 commits)
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
drm/exynos: remove unnecessary function declaration
drm/exynos: remove unnecessary descrptions
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
drm/exynos: Fix dma-buf import
drm/ttm: swap consecutive allocated pooled pages v4
drm: safely free connectors from connector_iter
drm/i915/gvt: set max priority for gvt context
drm/i915/gvt: Don't mark vgpu context as inactive when preempted
drm/i915/gvt: Limit read hw reg to active vgpu
drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
drm/i915/gvt: Emulate PCI expansion ROM base address register
drm/ttm: swap consecutive allocated cached pages v3
drm/ttm: roundup the shrink request to prevent skip huge pool
drm/ttm: add page order support in ttm_pages_put
drm/ttm: add set_pages_wb for handling page order more than zero
drm/ttm: add page order in page pool
...
Linus Torvalds [Fri, 8 Dec 2017 21:03:02 +0000 (13:03 -0800)]
Merge tag 'md/4.15-rc2' of git://git./linux/kernel/git/shli/md
Pull md fixes from Shaohua Li:
"Some MD fixes.
The notable one is a raid5-cache deadlock bug with dm-raid, others are
not significant"
* tag 'md/4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid1/10: add missed blk plug
md: limit mdstat resync progress to max_sectors
md/r5cache: move mddev_lock() out of r5c_journal_mode_set()
md/raid5: correct degraded calculation in raid5_error
Linus Torvalds [Fri, 8 Dec 2017 21:00:51 +0000 (13:00 -0800)]
Merge tag 'devicetree-fixes-for-4.15-part2' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
"Another set of DT fixes:
- Fixes from overlay code rework. A trifecta of fixes to the locking,
an out of bounds access, and a memory leak in of_overlay_apply()
- Clean-up at25 eeprom binding document
- Remove leading '0x' in unit-addresses from binding docs"
* tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: overlay: Make node skipping in init_overlay_changeset() clearer
of: overlay: Fix out-of-bounds write in init_overlay_changeset()
of: overlay: Fix (un)locking in of_overlay_apply()
of: overlay: Fix memory leak in of_overlay_apply() error path
dt-bindings: eeprom: at25: Document device-specific compatible values
dt-bindings: eeprom: at25: Grammar s/are can/can/
dt-bindings: Remove leading 0x from bindings notation
of: overlay: Remove else after goto
of: Spelling s/changset/changeset/
of: unittest: Remove bogus overlay mutex release from overlay_data_add()
Linus Torvalds [Fri, 8 Dec 2017 20:58:51 +0000 (12:58 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio bugfixes from Michael Tsirkin:
"A couple of minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_net: fix return value check in receive_mergeable()
virtio_mmio: add cleanup for virtio_mmio_remove
virtio_mmio: add cleanup for virtio_mmio_probe
Linus Torvalds [Fri, 8 Dec 2017 20:53:43 +0000 (12:53 -0800)]
Merge tag 'for-linus-4.15-rc3-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Just two small fixes for the new pvcalls frontend driver"
* tag 'for-linus-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: Fix a check in pvcalls_front_remove()
xen/pvcalls: check for xenbus_read() errors
Linus Torvalds [Fri, 8 Dec 2017 20:52:09 +0000 (12:52 -0800)]
Merge tag 'powerpc-4.15-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One notable fix for kexec on Power9, where we were not clearing MMU
PID properly which sometimes leads to hangs. Finally debugged to a
root cause by Nick.
A revert of a patch which tried to rework our panic handling to get
more output on the console, but inadvertently broke reporting the
panic to the hypervisor, which apparently people care about.
Then a fix for an oops in the PMU code, and finally some s/%p/%px/ in
xmon.
Thanks to: David Gibson, Nicholas Piggin, Ravi Bangoria"
* tag 'powerpc-4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xmon: Don't print hashed pointers in xmon
powerpc/64s: Initialize ISAv3 MMU registers before setting partition table
Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"
powerpc/perf: Fix oops when grouping different pmu events
David S. Miller [Fri, 8 Dec 2017 19:53:54 +0000 (14:53 -0500)]
Merge tag 'linux-can-fixes-for-4.15-
20171208' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2017-12-08
this is a pull request of 6 patches for net/master.
Martin Kelly provides 5 patches for various USB based CAN drivers, that
properly cancel the URBs on adapter unplug, so that the driver doesn't
end up in an endless loop. Stephane Grosjean provides a patch to restart
the tx queue if zero length packages are transmitted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Dec 2017 19:48:49 +0000 (14:48 -0500)]
Merge tag 'wireless-drivers-for-davem-2017-12-08' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
Second set of fixes for 4.15. This time a lot of iwlwifi patches and
two brcmfmac patches. Most important here are the MIC and IVC fixes
for iwlwifi to unbreak 9000 series.
iwlwifi
* fix rate-scaling to not start lowest possible rate
* fix the TX queue hang detection for AP/GO modes
* fix the TX queue hang timeout in monitor interfaces
* fix packet injection
* remove a wrong error message when dumping PCI registers
* fix race condition with RF-kill
* tell mac80211 when the MIC has been stripped (9000 series)
* tell mac80211 when the IVC has been stripped (9000 series)
* add 2 new PCI IDs, one for 9000 and one for 22000
* fix a queue hang due during a P2P Remain-on-Channel operation
brcmfmac
* fix a race which sometimes caused a crash during sdio unbind
* fix a kernel-doc related build error
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Fri, 8 Dec 2017 09:24:20 +0000 (10:24 +0100)]
net: mvpp2: fix the RSS table entry offset
The macro used to access or set an RSS table entry was using an offset
of 8, while it should use an offset of 0. This lead to wrongly configure
the RSS table, not accessing the right entries.
Fixes:
1d7d15d79fb4 ("net: mvpp2: initialize the RSS tables")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Dec 2017 19:14:12 +0000 (14:14 -0500)]
Merge branch 'tcp-RACK-loss-recovery-bug-fixes'
Yuchung Cheng says:
====================
tcp: RACK loss recovery bug fixes
This patch set has four minor bug fixes in TCP RACK loss recovery.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 7 Dec 2017 19:33:33 +0000 (11:33 -0800)]
tcp: evaluate packet losses upon RTT change
RACK skips an ACK unless it advances the most recently delivered
TX timestamp (rack.mstamp). Since RACK also uses the most recent
RTT to decide if a packet is lost, RACK should still run the
loss detection whenever the most recent RTT changes. For example,
an ACK that does not advance the timestamp but triggers the cwnd
undo due to reordering, would then use the most recent (higher)
RTT measurement to detect further losses.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 7 Dec 2017 19:33:32 +0000 (11:33 -0800)]
tcp: fix off-by-one bug in RACK
RACK should mark a packet lost when remaining wait time is zero.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 7 Dec 2017 19:33:31 +0000 (11:33 -0800)]
tcp: always evaluate losses in RACK upon undo
When sender detects spurious retransmission, all packets
marked lost are remarked to be in-flight. However some may
be considered lost based on its timestamps in RACK. This patch
forces RACK to re-evaluate, which may be skipped previously if
the ACK does not advance RACK timestamp.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 7 Dec 2017 19:33:30 +0000 (11:33 -0800)]
tcp: correctly test congestion state in RACK
RACK does not test the loss recovery state correctly to compute
the reordering window. It assumes if lost_out is zero then TCP is
not in loss recovery. But it can be zero during recovery before
calling tcp_rack_detect_loss(): when an ACK acknowledges all
packets marked lost before receiving this ACK, but has not yet
to discover new ones by tcp_rack_detect_loss(). The fix is to
simply test the congestion state directly.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calvin Owens [Fri, 8 Dec 2017 17:05:26 +0000 (09:05 -0800)]
bnxt_en: Fix sources of spurious netpoll warnings
After applying
2270bc5da3497945 ("bnxt_en: Fix netpoll handling") and
903649e718f80da2 ("bnxt_en: Improve -ENOMEM logic in NAPI poll loop."),
we still see the following WARN fire:
------------[ cut here ]------------
WARNING: CPU: 0 PID:
1875170 at net/core/netpoll.c:165 netpoll_poll_dev+0x15a/0x160
bnxt_poll+0x0/0xd0 exceeded budget in poll
<snip>
Call Trace:
[<
ffffffff814be5cd>] dump_stack+0x4d/0x70
[<
ffffffff8107e013>] __warn+0xd3/0xf0
[<
ffffffff8107e07f>] warn_slowpath_fmt+0x4f/0x60
[<
ffffffff8179519a>] netpoll_poll_dev+0x15a/0x160
[<
ffffffff81795f38>] netpoll_send_skb_on_dev+0x168/0x250
[<
ffffffff817962fc>] netpoll_send_udp+0x2dc/0x440
[<
ffffffff815fa9be>] write_ext_msg+0x20e/0x250
[<
ffffffff810c8125>] call_console_drivers.constprop.23+0xa5/0x110
[<
ffffffff810c9549>] console_unlock+0x339/0x5b0
[<
ffffffff810c9a88>] vprintk_emit+0x2c8/0x450
[<
ffffffff810c9d5f>] vprintk_default+0x1f/0x30
[<
ffffffff81173df5>] printk+0x48/0x50
[<
ffffffffa0197713>] edac_raw_mc_handle_error+0x563/0x5c0 [edac_core]
[<
ffffffffa0197b9b>] edac_mc_handle_error+0x42b/0x6e0 [edac_core]
[<
ffffffffa01c3a60>] sbridge_mce_output_error+0x410/0x10d0 [sb_edac]
[<
ffffffffa01c47cc>] sbridge_check_error+0xac/0x130 [sb_edac]
[<
ffffffffa0197f3c>] edac_mc_workq_function+0x3c/0x90 [edac_core]
[<
ffffffff81095f8b>] process_one_work+0x19b/0x480
[<
ffffffff810967ca>] worker_thread+0x6a/0x520
[<
ffffffff8109c7c4>] kthread+0xe4/0x100
[<
ffffffff81884c52>] ret_from_fork+0x22/0x40
This happens because we increment rx_pkts on -ENOMEM and -EIO, resulting
in rx_pkts > 0. Fix this by only bumping rx_pkts if we were actually
given a non-zero budget.
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Dec 2017 18:27:44 +0000 (13:27 -0500)]
Merge branch 'tcp-bbr-sampling-fixes'
Neal Cardwell says:
====================
TCP BBR sampling fixes for loss recovery undo
This patch series has a few minor bug fixes for cases where spurious
loss recoveries can trick BBR estimators into estimating that the
available bandwidth is much lower than the true available bandwidth.
In both cases the fix here is to just reset the estimator upon loss
recovery undo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 7 Dec 2017 17:43:32 +0000 (12:43 -0500)]
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
Fix BBR so that upon notification of a loss recovery undo BBR resets
long-term bandwidth sampling.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
can cause BBR to spuriously estimate that we are seeing loss rates
high enough to trigger long-term bandwidth estimation. To avoid that
problem, this commit resets long-term bandwidth sampling on loss
recovery undo events.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 7 Dec 2017 17:43:31 +0000 (12:43 -0500)]
tcp_bbr: reset full pipe detection on loss recovery undo
Fix BBR so that upon notification of a loss recovery undo BBR resets
the full pipe detection (STARTUP exit) state machine.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
could previously cause BBR to spuriously estimate that the pipe is
full.
Since spurious loss recovery means that our overall sending will have
slowed down spuriously, this commit gives a flow more time to probe
robustly for bandwidth and decide the pipe is really full.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 7 Dec 2017 17:43:30 +0000 (12:43 -0500)]
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
This commit records the "full bw reached" decision in a new
full_bw_reached bit. This is a pure refactor that does not change the
current behavior, but enables subsequent fixes and improvements.
In particular, this enables simple and clean fixes because the full_bw
and full_bw_cnt can be unconditionally zeroed without worrying about
forgetting that we estimated we filled the pipe in Startup. And it
enables future improvements because multiple code paths can be used
for estimating that we filled the pipe in Startup; any new code paths
only need to set this bit when they think the pipe is full.
Note that this fix intentionally reduces the width of the full_bw_cnt
counter, since we have never used the most significant bit.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 7 Dec 2017 17:18:58 +0000 (17:18 +0000)]
sfc: pass valid pointers from efx_enqueue_unwind
The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers
cannot be NULL. Add a paranoid warning to check this condition and fix
the one case where they were NULL.
efx_enqueue_unwind() is called very rarely, during error handling.
Without this fix it would fail with a NULL pointer dereference in
efx_dequeue_buffer, with efx_enqueue_skb in the call stack.
Fixes:
e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Reported-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Thu, 7 Dec 2017 16:44:23 +0000 (18:44 +0200)]
gianfar: Disable EEE autoneg by default
This controller does not support EEE, but it may connect to a PHY
which supports EEE and advertises EEE by default, while its link
partner also advertises EEE. If this happens, the PHY enters low
power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
gianfar connects to, to prevent the above unwanted outcome.
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Tested-by: Yangbo Lu <Yangbo.lu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 8 Dec 2017 18:10:17 +0000 (10:10 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- three more patches in regard to the SPDX license tags. The missing
tags for the files in arch/s390/kvm will be merged via the KVM tree.
With that all s390 related files should have their SPDX tags.
- a patch to get rid of 'struct timespec' in the DASD driver.
- bug fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix compat system call table
s390/mm: fix off-by-one bug in 5-level page table handling
s390: Remove redudant license text
s390: add a few more SPDX identifiers
s390/dasd: prevent prefix I/O error
s390: always save and restore all registers on context switch
s390/dasd: remove 'struct timespec' usage
s390/qdio: restrict target-full handling to IQDIO
s390/qdio: consider ERROR buffers for inbound-full condition
s390/virtio: add BSD license to virtio-ccw
Linus Torvalds [Fri, 8 Dec 2017 18:08:23 +0000 (10:08 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Fix some more FP register fallout from the SVE patches and also some
problems with the PGD tracking in our software PAN emulation code,
after we received a crash report from a 3.18 kernel running a
backport.
Summary:
- fix SW PAN pgd shadowing for kernel threads, EFI and exiting user
tasks
- fix FP register leak when a task_struct is re-allocated
- fix potential use-after-free in FP state tracking used by KVM"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sve: Avoid dereference of dead task_struct in KVM guest entry
arm64: SW PAN: Update saved ttbr0 value on enter_lazy_tlb
arm64: SW PAN: Point saved ttbr0 at the zero page when switching to init_mm
arm64: fpsimd: Abstract out binding of task's fpsimd context to the cpu.
arm64: fpsimd: Prevent registers leaking from dead tasks
Linus Torvalds [Fri, 8 Dec 2017 18:05:53 +0000 (10:05 -0800)]
Merge tag 'acpi-4.15-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes an out of bounds warning from KASAN in the ACPI CPPC
driver"
* tag 'acpi-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / CPPC: Fix KASAN global out of bounds warning
Linus Torvalds [Fri, 8 Dec 2017 17:58:10 +0000 (09:58 -0800)]
Merge tag 'pm-4.15-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes an issue in the device runtime PM framework that prevents
customer devices from resuming if runtime PM is disabled for one or
more of their supplier devices (as reflected by device links between
those devices)"
* tag 'pm-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / runtime: Fix handling of suppliers with disabled runtime PM
Geert Uytterhoeven [Fri, 8 Dec 2017 13:13:03 +0000 (14:13 +0100)]
of: overlay: Make node skipping in init_overlay_changeset() clearer
Make it more clear that nodes without "__overlay__" subnodes are
skipped, by reverting the logic and using continue.
This also reduces indentation level.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Geert Uytterhoeven [Fri, 8 Dec 2017 13:13:02 +0000 (14:13 +0100)]
of: overlay: Fix out-of-bounds write in init_overlay_changeset()
If an overlay has no "__symbols__" node, but it has nodes without
"__overlay__" subnodes at the end (e.g. a "__fixups__" node), after
filling in all fragments for nodes with "__overlay__" subnodes,
"fragment = &fragments[cnt]" will point beyond the end of the allocated
array.
Hence writing to "fragment->overlay" will overwrite unallocated memory,
which may lead to a crash later.
Fix this by deferring both the assignment to "fragment" and the
offending write afterwards until we know for sure the node has an
"__overlay__" subnode, and thus a valid entry in "fragments[]".
Fixes:
61b4de4e0b384f4a ("of: overlay: minor restructuring")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Yousuk Seung [Thu, 7 Dec 2017 21:41:34 +0000 (13:41 -0800)]
tcp: invalidate rate samples during SACK reneging
Mark tcp_sock during a SACK reneging event and invalidate rate samples
while marked. Such rate samples may overestimate bw by including packets
that were SACKed before reneging.
< ack 6001 win 10000 sack 7001:38001
< ack 7001 win 0 sack 8001:38001 // Reneg detected
> seq 7001:8001 // RTO, SACK cleared.
< ack 38001 win 10000
In above example the rate sample taken after the last ack will count
7001-38001 as delivered while the actual delivery rate likely could
be much lower i.e. 7001-8001.
This patch adds a new field tcp_sock.sack_reneg and marks it when we
declare SACK reneging and entering TCP_CA_Loss, and unmarks it after
the last rate sample was taken before moving back to TCP_CA_Open. This
patch also invalidates rate samples taken while tcp_sock.is_sack_reneg
is set.
Fixes:
b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephane Grosjean [Thu, 7 Dec 2017 15:13:43 +0000 (16:13 +0100)]
can: peak/pcie_fd: fix potential bug in restarting tx queue
Don't rely on can_get_echo_skb() return value to wake the network tx
queue up: can_get_echo_skb() returns 0 if the echo array slot was not
occupied, but also when the DLC of the released echo frame was 0.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 19:15:50 +0000 (11:15 -0800)]
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 19:15:49 +0000 (11:15 -0800)]
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 19:15:48 +0000 (11:15 -0800)]
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 19:15:47 +0000 (11:15 -0800)]
can: ems_usb: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 18:34:03 +0000 (10:34 -0800)]
can: mcba_usb: cancel urb on -EPROTO
When we unplug the device, we can see both -EPIPE and -EPROTO depending
on exact timing and what system we run on. If we continue to resubmit
URBs, they will immediately fail, and they can cause stalls, especially
on slower CPUs.
Fix this by not resubmitting on -EPROTO, as we already do on -EPIPE.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dave Airlie [Thu, 7 Dec 2017 22:17:53 +0000 (08:17 +1000)]
Merge tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
regression fix for vc4 + rpm stable fix for analogix bridge
* tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
Dave Airlie [Thu, 7 Dec 2017 22:17:09 +0000 (08:17 +1000)]
Merge tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for fd.o bug #103997 CNL eDP + HDMI causing a machine hard hang (James)
- Fix to allow suspending with a wedged GPU to hopefully unwedge it (Chris)
- Fix for Gen2 vblank timestap/frame counter jumps (Ville)
- Revert of a W/A for enabling FBC on CNL/GLK for certain images
and sizes (Rodrigo)
- Lockdep fix for i915 userptr code (Chris)
gvt-fixes-2017-12-06
- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)
* tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel:
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
drm/i915/gvt: set max priority for gvt context
drm/i915/gvt: Don't mark vgpu context as inactive when preempted
drm/i915/gvt: Limit read hw reg to active vgpu
drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
drm/i915/gvt: Emulate PCI expansion ROM base address register
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Skip switch-to-kernel-context on suspend when wedged
Dave Airlie [Thu, 7 Dec 2017 22:15:09 +0000 (08:15 +1000)]
Merge tag 'exynos-drm-fixes-for-v4.15-rc3' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
- fix page fault issue due to using wrong device object in prime import.
- drop NONCONTIG flag without IOMMU support.
- remove unnecessary members and declaration.
* tag 'exynos-drm-fixes-for-v4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: remove unnecessary function declaration
drm/exynos: remove unnecessary descrptions
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
drm/exynos: Fix dma-buf import
David S. Miller [Thu, 7 Dec 2017 21:22:51 +0000 (16:22 -0500)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-06
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fixing broken uapi for BPF tracing programs for s390 and arm64
architectures due to pt_regs being in-kernel only, and not part
of uapi right now. A wrapper is added that exports pt_regs in
an asm-generic way. For arm64 this maps to existing user_pt_regs
structure and for s390 a user_pt_regs structure exporting the
beginning of pt_regs is added and uapi-exported, thus fixing the
BPF issues seen in perf (and BPF selftests), all from Hendrik.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Wed, 6 Dec 2017 19:21:24 +0000 (20:21 +0100)]
usbnet: fix alignment for frames with no ethernet header
The qmi_wwan minidriver support a 'raw-ip' mode where frames are
received without any ethernet header. This causes alignment issues
because the skbs allocated by usbnet are "IP aligned".
Fix by allowing minidrivers to disable the additional alignment
offset. This is implemented using a per-device flag, since the same
minidriver also supports 'ethernet' mode.
Fixes:
32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode")
Reported-and-tested-by: Jay Foster <jay@systech.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 6 Dec 2017 19:08:19 +0000 (11:08 -0800)]
tcp: use current time in tcp_rcv_space_adjust()
When I switched rcv_rtt_est to high resolution timestamps, I forgot
that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust()
Using an old timestamp leads to autotuning lags.
Fixes:
645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 7 Dec 2017 04:09:12 +0000 (20:09 -0800)]
netlink: Relax attr validation for fixed length types
Commit
28033ae4e0f5 ("net: netlink: Update attr validation to require
exact length for some types") requires attributes using types NLA_U* and
NLA_S* to have an exact length. This change is exposing bugs in various
userspace commands that are sending attributes with an invalid length
(e.g., attribute has type NLA_U8 and userspace sends NLA_U32). While
the commands are clearly broken and need to be fixed, users are arguing
that the sudden change in enforcement is breaking older commands on
newer kernels for use cases that otherwise "worked".
Relax the validation to print a warning mesage similar to what is done
for messages containing extra bytes after parsing.
Fixes:
28033ae4e0f5 ("net: netlink: Update attr validation to require exact length for some types")
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita V. Shirokov [Thu, 7 Dec 2017 01:15:43 +0000 (17:15 -0800)]
adding missing rcu_read_unlock in ipxip6_rcv
commit
8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
introduced new exit point in ipxip6_rcv. however rcu_read_unlock is
missing there. this diff is fixing this
v1->v2:
instead of doing rcu_read_unlock in place, we are going to "drop"
section (to prevent skb leakage)
Fixes:
8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Dec 2017 18:53:05 +0000 (13:53 -0500)]
Merge branch 'mv88e6xxx-error-patch-fixes'
Andrew Lunn says:
====================
mv88e6xxx error patch fixes
While trying to bring up a new PHY on a board, i exercised the error
paths a bit, and discovered some bugs. The unwind for interrupt
handling deadlocks, and the MDIO code hits a BUG() when a registered
MDIO device is freed without first being unregistered.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 7 Dec 2017 00:05:57 +0000 (01:05 +0100)]
net: dsa: mv88e6xxx: Unregister MDIO bus on error path
The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.
Fixes:
a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 7 Dec 2017 00:05:56 +0000 (01:05 +0100)]
net: dsa: mv88e6xxx: Fix interrupt masking on removal
When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.
Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.
Fixes:
3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Branislav Radocaj [Wed, 6 Dec 2017 23:07:38 +0000 (00:07 +0100)]
net: ethernet: arc: fix error handling in emac_rockchip_probe
If clk_set_rate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Jordan [Wed, 6 Dec 2017 14:23:23 +0000 (15:23 +0100)]
net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case
add appropriate calls to clk_disable_unprepare() by jumping to out_mdio
in case orion_mdio_probe() returns -EPROBE_DEFER.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes:
3d604da1e954 ("net: mvmdio: get and enable optional clock")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunjian Wang [Mon, 4 Dec 2017 06:02:19 +0000 (14:02 +0800)]
virtio_net: fix return value check in receive_mergeable()
The function virtqueue_get_buf_ctx() could return NULL, the return
value 'buf' need to be checked with NULL, not value 'ctx'.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
weiping zhang [Wed, 6 Dec 2017 13:59:32 +0000 (21:59 +0800)]
virtio_mmio: add cleanup for virtio_mmio_remove
cleanup all resource allocated by virtio_mmio_probe.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
weiping zhang [Wed, 6 Dec 2017 13:59:16 +0000 (21:59 +0800)]
virtio_mmio: add cleanup for virtio_mmio_probe
As mentioned at drivers/base/core.c:
/*
* NOTE: _Never_ directly free @dev after calling this function, even
* if it returned an error! Always use put_device() to give up the
* reference initialized in this function instead.
*/
so we don't free vm_dev until vm_dev.dev.release be called.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Marek Szyprowski [Tue, 21 Nov 2017 07:49:36 +0000 (08:49 +0100)]
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
get_modes() callback might be called asynchronously from the DRM core and
it is not synchronized with bridge_enable(), which sets proper runtime PM
state of the main DP device. Fix this by calling pm_runtime_get_sync()
before calling drm_get_edid(), which in turn calls drm_dp_i2c_xfer() and
analogix_dp_transfer() to ensure that main DP device is runtime active
when doing any access to its registers.
This fixes the following kernel issue on Samsung Exynos5250 Snow board:
Unhandled fault: imprecise external abort (0x406) at 0x00000000
pgd =
c0004000
[
00000000] *pgd=
00000000
Internal error: : 406 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 62 Comm: kworker/0:2 Not tainted
4.13.0-rc2-00364-g4a97a3da420b #3357
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events output_poll_execute
task:
edc14800 task.stack:
edcb2000
PC is at analogix_dp_transfer+0x15c/0x2fc
LR is at analogix_dp_transfer+0x134/0x2fc
pc : [<
c0468538>] lr : [<
c0468510>] psr:
60000013
sp :
edcb3be8 ip :
0000002a fp :
00000001
r10:
00000000 r9 :
edcb3cd8 r8 :
edcb3c40
r7 :
00000000 r6 :
edd3b380 r5 :
edd3b010 r4 :
00000064
r3 :
00000000 r2 :
f0ad3000 r1 :
edcb3c40 r0 :
edd3b010
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
10c5387d Table:
4000406a DAC:
00000051
Process kworker/0:2 (pid: 62, stack limit = 0xedcb2210)
Stack: (0xedcb3be8 to 0xedcb4000)
[<
c0468538>] (analogix_dp_transfer) from [<
c0424ba4>] (drm_dp_i2c_do_msg+0x8c/0x2b4)
[<
c0424ba4>] (drm_dp_i2c_do_msg) from [<
c0424e64>] (drm_dp_i2c_xfer+0x98/0x214)
[<
c0424e64>] (drm_dp_i2c_xfer) from [<
c057b2d8>] (__i2c_transfer+0x140/0x29c)
[<
c057b2d8>] (__i2c_transfer) from [<
c057b4a4>] (i2c_transfer+0x70/0xe4)
[<
c057b4a4>] (i2c_transfer) from [<
c0441de4>] (drm_do_probe_ddc_edid+0xb4/0x114)
[<
c0441de4>] (drm_do_probe_ddc_edid) from [<
c0441e5c>] (drm_probe_ddc+0x18/0x28)
[<
c0441e5c>] (drm_probe_ddc) from [<
c0445728>] (drm_get_edid+0x124/0x2d4)
[<
c0445728>] (drm_get_edid) from [<
c0465ea0>] (analogix_dp_get_modes+0x90/0x114)
[<
c0465ea0>] (analogix_dp_get_modes) from [<
c0425e8c>] (drm_helper_probe_single_connector_modes+0x198/0x68c)
[<
c0425e8c>] (drm_helper_probe_single_connector_modes) from [<
c04325d4>] (drm_setup_crtcs+0x1b4/0xd18)
[<
c04325d4>] (drm_setup_crtcs) from [<
c04344a8>] (drm_fb_helper_hotplug_event+0x94/0xd0)
[<
c04344a8>] (drm_fb_helper_hotplug_event) from [<
c0425a50>] (drm_kms_helper_hotplug_event+0x24/0x28)
[<
c0425a50>] (drm_kms_helper_hotplug_event) from [<
c04263ec>] (output_poll_execute+0x6c/0x174)
[<
c04263ec>] (output_poll_execute) from [<
c0136f18>] (process_one_work+0x188/0x3fc)
[<
c0136f18>] (process_one_work) from [<
c01371f4>] (worker_thread+0x30/0x4b8)
[<
c01371f4>] (worker_thread) from [<
c013daf8>] (kthread+0x128/0x164)
[<
c013daf8>] (kthread) from [<
c0108510>] (ret_from_fork+0x14/0x24)
Code:
0a000002 ea000009 e2544001 0a00004a (
e59537c8)
---[ end trace
cddc7919c79f7878 ]---
Reported-by: Misha Komarovskiy <zombah@gmail.com>
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121074936.22520-1-m.szyprowski@samsung.com
Kalle Valo [Thu, 7 Dec 2017 13:50:34 +0000 (15:50 +0200)]
Merge tag 'iwlwifi-for-kalle-2017-12-05' of git://git./linux/kernel/git/iwlwifi/iwlwifi-fixes
Third batch of iwlwifi patches intended for 4.15.
* Tell mac80211 when the MAC has been stripped (9000 series);
* Tell mac80211 when the IVC has been stripped (9000 series);
* Add 2 new PCI IDs, one for 9000 and one for 22000;
* Fix a queue hang due during ROC.
Andy Shevchenko [Thu, 23 Nov 2017 15:57:04 +0000 (17:57 +0200)]
brcmfmac: Avoid build error with make W=1
When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for
the first run, all next ones are okay.
CC [M] drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!
scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed
Seems like something happened with W=1 and wrong kernel doc format.
As a quick fix remove dubious /** in the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Joonas Lahtinen [Thu, 7 Dec 2017 11:35:32 +0000 (13:35 +0200)]
Merge tag 'gvt-fixes-2017-12-06' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2017-12-06
- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206075105.wlh2ojubjczlstox@zhen-hp.sh.intel.com
Radhakrishna Sripada [Wed, 6 Dec 2017 22:25:07 +0000 (14:25 -0800)]
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
This reverts commit
8f067837c4b713ce2e69be95af7b2a5eb3bd7de8.
HSD says "WA withdrawn. It was causing corruption with some images.
WA is not strictly necessary since this bug just causes loss of FBC
compression with some sizes and images, but doesn't break anything."
Fixes:
8f067837c4b7 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117010825.23118-1-radhakrishna.sripada@intel.com
(cherry picked from commit
0cfecb7c4b9b45ed1776162e132b43f92564f3f4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Boris Brezillon [Wed, 22 Nov 2017 20:39:28 +0000 (21:39 +0100)]
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
With CONFIG_REFCOUNT_FULL enabled, refcount_inc() complains when it's
passed a refcount object that has its counter set to 0. In this driver,
this is a valid use case since we want to increment ->usecnt only when
the BO object starts to be used by real HW components and this is
definitely not the case when the BO is created.
Fix the problem by using refcount_inc_not_zero() instead of
refcount_inc() and fallback to refcount_set(1) when
refcount_inc_not_zero() returns false. Note that this 2-steps operation
is not racy here because the whole section is protected by a mutex
which guarantees that the counter does not change between the
refcount_inc_not_zero() and refcount_set() calls.
Fixes:
b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122203928.28135-1-boris.brezillon@free-electrons.com
Chris Wilson [Wed, 22 Nov 2017 17:26:21 +0000 (17:26 +0000)]
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
We don't need struct_mutex to initialise userptr (it just allocates a
workqueue for itself etc), but we do need struct_mutex later on in
i915_gem_init() in order to feed requests onto the HW.
This should break the chain
[ 385.697902] ======================================================
[ 385.697907] WARNING: possible circular locking dependency detected
[ 385.697913] 4.14.0-CI-Patchwork_7234+ #1 Tainted: G U
[ 385.697917] ------------------------------------------------------
[ 385.697922] perf_pmu/2631 is trying to acquire lock:
[ 385.697927] (&mm->mmap_sem){++++}, at: [<
ffffffff811bfe1e>] __might_fault+0x3e/0x90
[ 385.697941]
but task is already holding lock:
[ 385.697946] (&cpuctx_mutex){+.+.}, at: [<
ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0
[ 385.697957]
which lock already depends on the new lock.
[ 385.697963]
the existing dependency chain (in reverse order) is:
[ 385.697970]
-> #4 (&cpuctx_mutex){+.+.}:
[ 385.697980] __mutex_lock+0x86/0x9b0
[ 385.697985] perf_event_init_cpu+0x5a/0x90
[ 385.697991] perf_event_init+0x178/0x1a4
[ 385.697997] start_kernel+0x27f/0x3f1
[ 385.698003] verify_cpu+0x0/0xfb
[ 385.698006]
-> #3 (pmus_lock){+.+.}:
[ 385.698015] __mutex_lock+0x86/0x9b0
[ 385.698020] perf_event_init_cpu+0x21/0x90
[ 385.698025] cpuhp_invoke_callback+0xca/0xc00
[ 385.698030] _cpu_up+0xa7/0x170
[ 385.698035] do_cpu_up+0x57/0x70
[ 385.698039] smp_init+0x62/0xa6
[ 385.698044] kernel_init_freeable+0x97/0x193
[ 385.698050] kernel_init+0xa/0x100
[ 385.698055] ret_from_fork+0x27/0x40
[ 385.698058]
-> #2 (cpu_hotplug_lock.rw_sem){++++}:
[ 385.698068] cpus_read_lock+0x39/0xa0
[ 385.698073] apply_workqueue_attrs+0x12/0x50
[ 385.698078] __alloc_workqueue_key+0x1d8/0x4d8
[ 385.698134] i915_gem_init_userptr+0x5f/0x80 [i915]
[ 385.698176] i915_gem_init+0x7c/0x390 [i915]
[ 385.698213] i915_driver_load+0x99e/0x15c0 [i915]
[ 385.698250] i915_pci_probe+0x33/0x90 [i915]
[ 385.698256] pci_device_probe+0xa1/0x130
[ 385.698262] driver_probe_device+0x293/0x440
[ 385.698267] __driver_attach+0xde/0xe0
[ 385.698272] bus_for_each_dev+0x5c/0x90
[ 385.698277] bus_add_driver+0x16d/0x260
[ 385.698282] driver_register+0x57/0xc0
[ 385.698287] do_one_initcall+0x3e/0x160
[ 385.698292] do_init_module+0x5b/0x1fa
[ 385.698297] load_module+0x2374/0x2dc0
[ 385.698302] SyS_finit_module+0xaa/0xe0
[ 385.698307] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 385.698311]
-> #1 (&dev->struct_mutex){+.+.}:
[ 385.698320] __mutex_lock+0x86/0x9b0
[ 385.698361] i915_mutex_lock_interruptible+0x4c/0x130 [i915]
[ 385.698403] i915_gem_fault+0x206/0x760 [i915]
[ 385.698409] __do_fault+0x1a/0x70
[ 385.698413] __handle_mm_fault+0x7c4/0xdb0
[ 385.698417] handle_mm_fault+0x154/0x300
[ 385.698440] __do_page_fault+0x2d6/0x570
[ 385.698445] page_fault+0x22/0x30
[ 385.698449]
-> #0 (&mm->mmap_sem){++++}:
[ 385.698459] lock_acquire+0xaf/0x200
[ 385.698464] __might_fault+0x68/0x90
[ 385.698470] _copy_to_user+0x1e/0x70
[ 385.698475] perf_read+0x1aa/0x290
[ 385.698480] __vfs_read+0x23/0x120
[ 385.698484] vfs_read+0xa3/0x150
[ 385.698488] SyS_read+0x45/0xb0
[ 385.698493] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 385.698497]
other info that might help us debug this:
[ 385.698505] Chain exists of:
&mm->mmap_sem --> pmus_lock --> &cpuctx_mutex
[ 385.698517] Possible unsafe locking scenario:
[ 385.698522] CPU0 CPU1
[ 385.698526] ---- ----
[ 385.698529] lock(&cpuctx_mutex);
[ 385.698553] lock(pmus_lock);
[ 385.698558] lock(&cpuctx_mutex);
[ 385.698564] lock(&mm->mmap_sem);
[ 385.698568]
*** DEADLOCK ***
[ 385.698574] 1 lock held by perf_pmu/2631:
[ 385.698578] #0: (&cpuctx_mutex){+.+.}, at: [<
ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0
[ 385.698589]
stack backtrace:
[ 385.698595] CPU: 3 PID: 2631 Comm: perf_pmu Tainted: G U 4.14.0-CI-Patchwork_7234+ #1
[ 385.698602] Hardware name: /NUC6CAYB, BIOS AYAPLCEL.86A.0040.2017.0619.1722 06/19/2017
[ 385.698609] Call Trace:
[ 385.698615] dump_stack+0x5f/0x86
[ 385.698621] print_circular_bug.isra.18+0x1d0/0x2c0
[ 385.698627] __lock_acquire+0x19c3/0x1b60
[ 385.698634] ? generic_exec_single+0x77/0xe0
[ 385.698640] ? lock_acquire+0xaf/0x200
[ 385.698644] lock_acquire+0xaf/0x200
[ 385.698650] ? __might_fault+0x3e/0x90
[ 385.698655] __might_fault+0x68/0x90
[ 385.698660] ? __might_fault+0x3e/0x90
[ 385.698665] _copy_to_user+0x1e/0x70
[ 385.698670] perf_read+0x1aa/0x290
[ 385.698675] __vfs_read+0x23/0x120
[ 385.698682] ? __fget+0x101/0x1f0
[ 385.698686] vfs_read+0xa3/0x150
[ 385.698691] SyS_read+0x45/0xb0
[ 385.698696] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 385.698701] RIP: 0033:0x7ff1c46876ed
[ 385.698705] RSP: 002b:
00007fff13552f90 EFLAGS:
00000293 ORIG_RAX:
0000000000000000
[ 385.698712] RAX:
ffffffffffffffda RBX:
ffffc90000647ff0 RCX:
00007ff1c46876ed
[ 385.698718] RDX:
0000000000000010 RSI:
00007fff13552fa0 RDI:
0000000000000005
[ 385.698723] RBP:
000056063d300580 R08:
0000000000000000 R09:
0000000000000060
[ 385.698729] R10:
0000000000000000 R11:
0000000000000293 R12:
0000000000000046
[ 385.698734] R13:
00007fff13552c6f R14:
00007ff1c6279d00 R15:
00007ff1c6279a40
Testcase: igt/perf_pmu
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122172621.16158-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit
ee48700dd57d9ce783ec40f035b324d0b75632e4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Heiko Carstens [Wed, 6 Dec 2017 15:11:27 +0000 (16:11 +0100)]
s390: fix compat system call table
When wiring up the socket system calls the compat entries were
incorrectly set. Not all of them point to the corresponding compat
wrapper functions, which clear the upper 33 bits of user space
pointers, like it is required.
Fixes:
977108f89c989 ("s390: wire up separate socketcalls system calls")
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds [Thu, 7 Dec 2017 02:33:17 +0000 (18:33 -0800)]
Merge tag 'for_linus-4.15-rc2' of git://git./linux/kernel/git/jwessel/kgdb
Pull kgdb fixes from Jason Wessel:
- Fix long standing problem with kdb kallsyms_symbol_next() return
value
- Add new co-maintainer Daniel Thompson
* tag 'for_linus-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kgdb/kdb/debug_core: Add co-maintainer Daniel Thompson
kdb: Fix handling of kallsyms_symbol_next() return value
Linus Torvalds [Thu, 7 Dec 2017 02:23:27 +0000 (18:23 -0800)]
proc: show si_ptr in /proc/<pid>/timers without hashing
It's a user pointer, and while the permissions of the file are pretty
questionable (should it really be readable to everybody), hashing the
pointer isn't going to be the solution.
We should take a closer look at more of the /proc/<pid> file permissions
in general. Sure, we do want many of them to often be readable (for
'ps' and friends), but I think we should probably do a few conversions
from S_IRUGO to S_IRUSR.
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 7 Dec 2017 02:16:20 +0000 (18:16 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu fixes from Greg Ungerer:
"There are two fixes here. One to add a missing linker section to the
m68k architecture linker scripts, the other to fix a defconfig build
problem"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k/defconfig: fix stmark2 broken local compilation
m68k: add missing SOFTIRQENTRY_TEXT linker section
Linus Torvalds [Thu, 7 Dec 2017 01:47:29 +0000 (17:47 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- make CR4 handling irq-safe, which bug vmware guests ran into
- don't crash on early IRQs in Xen guests
- don't crash secondary CPU bringup if #UD assisted WARN()ings are
triggered
- make X86_BUG_FXSAVE_LEAK optional on newer AMD CPUs that have the fix
- fix AMD Fam17h microcode loading
- fix broadcom_postcore_init() if ACPI is disabled
- fix resume regression in __restore_processor_context()
- fix Sparse warnings
- fix a GCC-8 warning
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Change time() prototype to match __vdso_time()
x86: Fix Sparse warnings about non-static functions
x86/power: Fix some ordering bugs in __restore_processor_context()
x86/PCI: Make broadcom_postcore_init() check acpi_disabled
x86/microcode/AMD: Add support for fam17h microcode loading
x86/cpufeatures: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
x86/idt: Load idt early in start_secondary
x86/xen: Support early interrupts in xen pv guests
x86/tlb: Disable interrupts when changing CR4
x86/tlb: Refactor CR4 setting and shadow write
Linus Torvalds [Thu, 7 Dec 2017 01:45:36 +0000 (17:45 -0800)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"A single fix moving the smp-call queue flush step to the intended
point in the state machine"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/hotplug: Move step CPUHP_AP_SMPCFD_DYING to the correct place
Linus Torvalds [Thu, 7 Dec 2017 01:43:26 +0000 (17:43 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"This includes a fix for the add_wait_queue() queue ordering brown
paperbag bug, plus PELT accounting fixes for cgroups scheduling
artifacts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Update and fix the runnable propagation rule
sched/wait: Fix add_wait_queue() behavioral change
Linus Torvalds [Thu, 7 Dec 2017 01:41:24 +0000 (17:41 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This includes perf namespace support kernel side fixes, plus an
accumulated set of perf tooling fixes - including UAPI header
synchronization that should make the perf build less noisy"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
tooling/headers: Synchronize updated s390 and x86 UAPI headers
tools headers: Syncronize mman.h ABI header
tools headers: Synchronize prctl.h ABI header
tools headers: Synchronize KVM arch ABI headers
tools headers: Synchronize drm/i915_drm.h
tools headers uapi: Synchronize drm/drm.h
tools headers: Synchronize perf_event.h header
tools headers: Synchronize kernel ABI headers wrt SPDX tags
tools/headers: Synchronize kernel x86 UAPI headers
perf intel-pt: Bring instruction decoder files into line with the kernel
perf test: Fix test 21 for s390x
perf bench numa: Fixup discontiguous/sparse numa nodes
perf top: Use signal interface for SIGWINCH handler
perf top: Fix window dimensions change handling
perf: Fix header.size for namespace events
perf top: Ignore kptr_restrict when not sampling the kernel
perf record: Ignore kptr_restrict when not sampling the kernel
perf report: Ignore kptr_restrict when not sampling the kernel
perf evlist: Add helper to check if attr.exclude_kernel is set in all evsels
perf test shell: Fix test case probe libc's inet_pton on s390x
...
Linus Torvalds [Thu, 7 Dec 2017 01:39:44 +0000 (17:39 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull lockdep fix from Ingo Molnar:
"Fix a possible NULL dereference for the (rare) case when a task
doesn't have ->xhlocks space allocated due to kmalloc() OOM-ing"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix possible NULL deref
Inki Dae [Thu, 23 Nov 2017 09:27:57 +0000 (18:27 +0900)]
drm/exynos: remove unnecessary function declaration
Removed exynos_drm_get_dma_device funtion declaration on top
of exynos_drm_drv.c file.
We can remove this declaration by moving the implementation
of this function upwards.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Thu, 23 Nov 2017 09:32:06 +0000 (18:32 +0900)]
drm/exynos: remove unnecessary descrptions
Removed two descriptions to 'da_start' and 'da_space_size'
from exynos_drm_private structure.
These members don't exist anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Wed, 22 Nov 2017 13:14:47 +0000 (14:14 +0100)]
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver
are contiguous, because of the underlying dma_alloc_attrs() function
provides only such buffers. In such case it makes no sense to keep
BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid
failures for buffer contiguity checks in the subsequent operations on GEM
objects.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
CC: stable@vger.kernel.org # v4.4+
Marek Szyprowski [Mon, 30 Oct 2017 07:28:09 +0000 (08:28 +0100)]
drm/exynos: Fix dma-buf import
When IOMMU support was enabled, dma-buf import in Exynos DRM was broken
since commit
f43c35966a5a ("drm/exynos: use real device for DMA-mapping
operations") due to using wrong struct device in drm_gem_prime_import()
function. This patch fixes following kernel BUG caused by incorrect buffer
mapping to DMA address space:
exynos-sysmmu
14650000.sysmmu:
14450000.mixer: PAGE FAULT occurred at 0xb2e00000
------------[ cut here ]------------
kernel BUG at drivers/iommu/exynos-iommu.c:449!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.14.0-rc4-next-20171016-00033-g990d723669fd #3165
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task:
c0e0b7c0 task.stack:
c0e00000
PC is at exynos_sysmmu_irq+0x1d0/0x24c
LR is at exynos_sysmmu_irq+0x154/0x24c
------------[ cut here ]------------
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Fixes:
f43c35966a5a ("drm/exynos: use real device for DMA-mapping operations")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Linus Torvalds [Wed, 6 Dec 2017 23:47:51 +0000 (15:47 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes: use bool type consistently, plus a irq_matrix_available()
bugfix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdesc: Use bool return type instead of int
genirq/matrix: Fix the precedence fix for real
Linus Torvalds [Wed, 6 Dec 2017 23:20:51 +0000 (15:20 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc fixes: world-readable pointer removal from sysfs, a ESRT kfree()
bug fix and a comment update"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Add comment to avoid future expanding of sysfs systab
efi/esrt: Use memunmap() instead of kfree() to free the remapping
efi: Move some sysfs files to be read-only by root
Linus Torvalds [Wed, 6 Dec 2017 22:53:32 +0000 (14:53 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
"Two fixes:
- objtool cross-build fixes
- removal of an obsolete CPU-hotplug state name from comments"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix 64-bit build on 32-bit host
cpu/hotplug: Fix state name in takedown_cpu() comment
Dave Airlie [Wed, 6 Dec 2017 22:29:26 +0000 (08:29 +1000)]
Merge tag 'drm-misc-fixes-2017-12-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Just the connector_iter corner-case regression fix.
* tag 'drm-misc-fixes-2017-12-06' of git://anongit.freedesktop.org/drm/drm-misc:
drm: safely free connectors from connector_iter
Jason Wessel [Tue, 5 Dec 2017 19:26:27 +0000 (13:26 -0600)]
kgdb/kdb/debug_core: Add co-maintainer Daniel Thompson
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Daniel Thompson [Mon, 2 Mar 2015 14:13:36 +0000 (14:13 +0000)]
kdb: Fix handling of kallsyms_symbol_next() return value
kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.
This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Geert Uytterhoeven [Tue, 5 Dec 2017 15:27:03 +0000 (16:27 +0100)]
of: overlay: Fix (un)locking in of_overlay_apply()
The special overlay mutex is taken first, hence it should be released
last in the error path.
of_resolve_phandles() must be called with of_mutex held. Without it, a
node and new phandle could be added via of_attach_node(), making the max
phandle wrong.
free_overlay_changeset() must be called with of_mutex held, if any
non-trivial cleanup is to be done.
Hence move "mutex_lock(&of_mutex)" up, as suggested by Frank, and merge
the two tail statements of the success and error paths, now they became
identical.
Note that while the two mutexes are adjacent, we still need both:
__of_changeset_apply_notify(), which is called by __of_changeset_apply()
unlocks of_mutex, then does notifications then locks of_mutex. So the
mutex get released in the middle of of_overlay_apply()
Fixes:
f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Geert Uytterhoeven [Tue, 5 Dec 2017 15:27:02 +0000 (16:27 +0100)]
of: overlay: Fix memory leak in of_overlay_apply() error path
If of_resolve_phandles() fails, free_overlay_changeset() is called in
the error path. However, that function returns early if the list hasn't
been initialized yet, before freeing the object.
Explicitly calling kfree() instead would solve that issue. However, that
complicates matter, by having to consider which of two different methods
to use to dispose of the same object.
Hence make free_overlay_changeset() consider initialization state of the
different parts of the object, making it always safe to call (once!) to
dispose of a (partially) initialized overlay_changeset:
- Only destroy the changeset if the list was initialized,
- Make init_overlay_changeset() store the ID in ovcs->id on success,
to avoid calling idr_remove() with an error value or an already
released ID.
Reported-by: Colin King <colin.king@canonical.com>
Fixes:
f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Ingo Molnar [Wed, 6 Dec 2017 21:41:53 +0000 (22:41 +0100)]
tooling/headers: Synchronize updated s390 and x86 UAPI headers
There were two trivial updates to these upstream UAPI headers:
arch/s390/include/uapi/asm/kvm.h
arch/s390/include/uapi/asm/kvm_perf.h
arch/x86/lib/x86-opcode-map.txt
Synchronize them with their tooling copies.
(The x86 opcode map includes a new instruction pattern now.)
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 6 Dec 2017 21:39:39 +0000 (22:39 +0100)]
Merge branch 'linus' into perf/urgent, to synchronize UAPI headers
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mikulas Patocka [Sat, 2 Dec 2017 22:17:44 +0000 (16:17 -0600)]
objtool: Fix 64-bit build on 32-bit host
The new ORC unwinder breaks the build of a 64-bit kernel on a 32-bit
host. Building the kernel on a i386 or x32 host fails with:
orc_dump.c: In function 'orc_dump':
orc_dump.c:105:26: error: passing argument 2 of 'elf_getshdrnum' from incompatible pointer type [-Werror=incompatible-pointer-types]
if (elf_getshdrnum(elf, &nr_sections)) {
^
In file included from /usr/local/include/gelf.h:32:0,
from elf.h:22,
from warn.h:26,
from orc_dump.c:20:
/usr/local/include/libelf.h:304:12: note: expected 'size_t * {aka unsigned int *}' but argument is of type 'long unsigned int *'
extern int elf_getshdrnum (Elf *__elf, size_t *__dst);
^~~~~~~~~~~~~~
orc_dump.c:190:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Sxword {aka long long int}' [-Werror=format=]
printf("%s+%lx:", name, rela.r_addend);
~~^ ~~~~~~~~~~~~~
%llx
Fix the build failure.
Another problem is that if the user specifies HOSTCC or HOSTLD
variables, they are ignored in the objtool makefile. Change the
Makefile to respect these variables.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Joachim <svenjoac@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
627fce14809b ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/19f0e64d8e07e30a7b307cd010eb780c404fe08d.1512252895.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Geert Uytterhoeven [Thu, 30 Nov 2017 13:29:46 +0000 (14:29 +0100)]
dt-bindings: eeprom: at25: Document device-specific compatible values
Document the recommended presence of a device-specific compatible value,
and list examples that are already in use or soon will be.
This will allow checkpatch to validate compatible values in DTS.
Update the example to match current best practices (generic node name,
specific compatible value first).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Geert Uytterhoeven [Thu, 30 Nov 2017 13:29:45 +0000 (14:29 +0100)]
dt-bindings: eeprom: at25: Grammar s/are can/can/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>