OSDN Git Service
Hannes Reinecke [Tue, 1 Dec 2015 09:16:58 +0000 (10:16 +0100)]
scsi_dh_alua: use scsi_vpd_tpg_id()
Use the common function 'scsi_vpd_tpg_id()' instead of open-coding
it in scsi_dh_alua.
[mkp: Applied by hand]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:57 +0000 (10:16 +0100)]
scsi: Add scsi_vpd_tpg_id()
Implement scsi_vpd_tpg_id() to extract the target
port group id and the relative port id from
SCSI VPD page 0x83.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:56 +0000 (10:16 +0100)]
scsi: export 'wwid' to sysfs
Use scsi_vpd_lun_id() to export the world-wide unique id (wwid) to
sysfs. Note that this is the 'best' wwid according to the rules in
scsi_vpd_lun_id(), not every possible wwid presented by the drive.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:55 +0000 (10:16 +0100)]
scsi: Add scsi_vpd_lun_id()
Add a function scsi_vpd_lun_id() to return a unique device
identifcation based on the designation descriptors of
VPD page 0x83.
As devices might implement several descriptors the order
of preference is:
- NAA IEE Registered Extended
- EUI-64 based 16-byte
- EUI-64 based 12-byte
- NAA IEEE Registered
- NAA IEEE Extended
A SCSI name string descriptor is preferred to all of them
if the identification is longer than 16 bytes.
The returned unique device identification will be formatted
as a SCSI Name string to avoid clashes between different
designator types.
[mkp: Fixed up kernel doc comment from Johannes]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:54 +0000 (10:16 +0100)]
scsi_dh_alua: simplify sense code handling
Most sense code is already handled in the generic
code, so we shouldn't be adding special cases here.
However, when doing so we need to check for
unit attention whenever we're sending an internal
command.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:53 +0000 (10:16 +0100)]
scsi_dh_alua: rework alua_check_tpgs() to return the tpgs mode
Instead of returning an error code in alua_check_tpgs() we should
rather return the tpgs mode directly and have a cleaner syntax.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:52 +0000 (10:16 +0100)]
scsi_dh_alua: use unaligned access macros
Use 'get_unaligned_XX' and 'put_unaligned_XX' instead of
open-coding it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:51 +0000 (10:16 +0100)]
scsi_dh_alua: use flag for RTPG extended header
We should be using a flag when RTPG extended header is not
supported, that saves us sending RTPG twice for older arrays.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:50 +0000 (10:16 +0100)]
scsi: remove scsi_show_sense_hdr()
Last caller is gone, so remove it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:49 +0000 (10:16 +0100)]
scsi_dh_alua: fixup description of stpg_endio()
Fixup copy-and-paste error in the description of stpg_endio().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:48 +0000 (10:16 +0100)]
scsi_dh_alua: return standard SCSI return codes in submit_rtpg
Fixup submit_rtpg() to always return a standard SCSI return code.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:47 +0000 (10:16 +0100)]
scsi_dh_alua: use standard logging functions
Use standard logging functions instead of hand-crafted ones.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:46 +0000 (10:16 +0100)]
scsi_dh_alua: sanitze sense code handling
The only check for a valid sense code is calling scsi_normalize_sense()
and check the return value. So drop the pointless checks and rely on
scsi_normalize_sense() to figure out if the sense code is valid.
With that we can also remove the 'senselen' field.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Reviewed-by: Bart van Assche <bvanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:45 +0000 (10:16 +0100)]
scsi_dh_alua: improved logging
Issue different logging messages if ALUA is not supported
or the TPGS setting is invalid.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:44 +0000 (10:16 +0100)]
scsi_dh_alua: Use vpd_pg83 information
The SCSI device now has the VPD page 0x83 information attached,
so there is no need to query it again.
[mkp: Fixed a checkpatch warning]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:43 +0000 (10:16 +0100)]
scsi_dh_alua: Disable ALUA handling for non-disk devices
Non-disk devices might support ALUA, but the firmware
implementation is untested and frequently broken.
As we're don't actually need it disable ALUA support
for non-disk device for now.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:42 +0000 (10:16 +0100)]
scsi: ignore errors from scsi_dh_add_device()
device handler initialisation might fail due to a number of
reasons. But as device_handlers are optional this shouldn't
cause us to disable the device entirely.
So just ignore errors from scsi_dh_add_device().
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Dec 2015 09:16:41 +0000 (10:16 +0100)]
scsi_dh: move 'dh_state' sysfs attribute to generic code
As scsi_dh.c is now always compiled in we should be moving
the 'dh_state' attribute to the generic code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luis de Bethencourt [Mon, 30 Nov 2015 14:32:17 +0000 (14:32 +0000)]
mvsas: fix misleading indentation
Fix a smatch warning:
drivers/scsi/mvsas/mv_sas.c:740 mvs_task_prep() warn: curly braces intended?
The code is correct, the indention is misleading. When the device is not
ready we want to return SAS_PHY_DOWN. But current indentation makes it
look like we only do so in the else branch of if (mvi_dev).
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Sat, 28 Nov 2015 16:33:56 +0000 (16:33 +0000)]
scsi: ufs: fix spelling mistake in error message
Minor issue, fix spelling mistake, Intialization -> Initialization
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Thu, 26 Nov 2015 11:44:55 +0000 (19:44 +0800)]
arcmsr: change driver version to v1.30.00.22-
20151126
Change driver version to v1.30.00.22-
20151126
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Thu, 26 Nov 2015 11:41:15 +0000 (19:41 +0800)]
arcmsr: Split dma resource allocation to a new function
Split dma resource allocation and io register assignment from get_config
to a new function arcmsr_alloc_io_queue.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Thu, 26 Nov 2015 11:33:56 +0000 (19:33 +0800)]
arcmsr: more readability improvements
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Wed, 25 Nov 2015 11:52:15 +0000 (19:52 +0800)]
arcmsr: changes driver version number
Changes driver version number.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Wed, 25 Nov 2015 11:49:33 +0000 (19:49 +0800)]
arcmsr: adds code to support new Areca adapter ARC1203
Support Areca's new PCIe to SATA RAID adapter ARC1203.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Wed, 25 Nov 2015 11:45:16 +0000 (19:45 +0800)]
arcmsr: make code more readable
[mkp: Fixed checkpatch whitespace warning]
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Wed, 25 Nov 2015 11:41:23 +0000 (19:41 +0800)]
arcmsr: fixes not release allocated resource
Releasing allocated resource if get configuration data failed.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ching Huang [Wed, 25 Nov 2015 11:36:02 +0000 (19:36 +0800)]
arcmsr: fixed getting wrong configuration data
Fixed getting wrong configuration data of adapter type B and type D.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Fri, 20 Nov 2015 21:33:04 +0000 (13:33 -0800)]
scsi_transport_fc: Introduce scsi_host_{get,put}()
Use scsi_host_{get,put}() instead of open-coding these functions.
Compile-tested only.
[mkp: Dropped CC:stable and fixed James Smart's email address]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James Smart <james.smart@avagotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Andy Shevchenko [Thu, 26 Nov 2015 18:22:50 +0000 (20:22 +0200)]
scsi_debug: check for bigger value first
Even for signed types we have to check for bigger positive value first.
Otherwise it will be never happened.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Mon, 9 Nov 2015 12:24:28 +0000 (13:24 +0100)]
scsi: rescan VPD attributes
The VPD page information might change, so we need to be able to update
it. This patch implements a VPD page rescan whenever the 'rescan' sysfs
attribute is triggered.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fengguang Wu [Tue, 10 Nov 2015 05:59:06 +0000 (13:59 +0800)]
aacraid: aac_release_resources() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Fri, 20 Nov 2015 16:38:28 +0000 (17:38 +0100)]
scsi: use sector_div instead of do_div
do_div is the wrong way to divide a sector_t, as it is less efficient
when sector_t is 32-bit wide. With the upcoming do_div optimizations,
the kernel starts warning about this:
drivers/scsi/scsi_debug.c: In function 'dif_store':
include/asm-generic/div64.h:207:28: warning: comparison of distinct pointer types lacks a cast
This changes the code to use sector_div instead, which always produces
optimal code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Thu, 19 Nov 2015 12:23:59 +0000 (20:23 +0800)]
hisi_sas: Remove dependency on of_irq_count
Originally the driver would use of_irq_count to calculate how much
memory is required for storing the interrupt names, since the number of
interrupt sources for the controller is variable. Since of_irq_count
cannot be used by the driver, use fixed names.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:59 +0000 (00:50 +0800)]
MAINTAINERS: Add maintainer for HiSi SAS driver
Add maintainer for HiSilicon SAS driver.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:58 +0000 (00:50 +0800)]
hisi_sas: Add fatal irq handler
Add handlers for fatal interrupts.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:57 +0000 (00:50 +0800)]
hisi_sas: Add control phy handler
Add method for lldd_control_phy. Currently link rate control and spinup
hold is unsupported.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:56 +0000 (00:50 +0800)]
hisi_sas: Add tmf methods
Add function methods for tmf's.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:55 +0000 (00:50 +0800)]
hisi_sas: Add scan finished and start
Add functions for scsi host template scan_finished and scan_start
methods.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:54 +0000 (00:50 +0800)]
hisi_sas: Add smp protocol support
Add support for smp function, which allows devices attached by expander
to be controlled.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:53 +0000 (00:50 +0800)]
hisi_sas: Add bcast interrupt handler
This is for expander broadcast event.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:52 +0000 (00:50 +0800)]
hisi_sas: Add abnormal irq handler
Add abnormal irq handler. This handler is concerned with phy down event.
Also add port formed and port deformed handlers.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:51 +0000 (00:50 +0800)]
hisi_sas: Add dev_found and dev_gone
Add functions to deal with lldd_dev_found and lldd_dev_gone.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:50 +0000 (00:50 +0800)]
hisi_sas: Add cq interrupt handler
Add cq interrupt handler and also slot error handler function.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:49 +0000 (00:50 +0800)]
hisi_sas: Add ssp command function
Add path to send ssp command to HW.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:48 +0000 (00:50 +0800)]
hisi_sas: Add path from phyup irq to SAS framework
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:47 +0000 (00:50 +0800)]
hisi_sas: Add v1 hardware interrupt init
Add code to interrupts, so now we can get a phy up interrupt when a disk
is connected.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:46 +0000 (00:50 +0800)]
hisi_sas: Add v1 hardware initialisation code
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:45 +0000 (00:50 +0800)]
hisi_sas: Add v1 hardware register definitions
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:44 +0000 (00:50 +0800)]
hisi_sas: Add v1 hw module init
Add module init code for v1 hw.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:43 +0000 (00:50 +0800)]
hisi_sas: Add timer and spinlock init
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:42 +0000 (00:50 +0800)]
hisi_sas: Add phy and port init
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:41 +0000 (00:50 +0800)]
hisi_sas: Add hisi sas device type
Include initialisation.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:40 +0000 (00:50 +0800)]
hisi_sas: Add hisi_hba workqueue
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:39 +0000 (00:50 +0800)]
hisi_sas: Set dev DMA mask
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:38 +0000 (00:50 +0800)]
hisi_sas: Add phy SAS ADDR initialization
The SAS address for the HBA comes from the device tree.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:37 +0000 (00:50 +0800)]
hisi_sas: Add cq structure initialization
Each completion queue has a structure. This is mainly for passing to irq
handler so we know which queue the irq occured on.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:36 +0000 (00:50 +0800)]
hisi_sas: Add slot init code
Add functionality to init slot indexing.
Slot indexing is for the host to track which slots (or tags) are free
and which are used.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:35 +0000 (00:50 +0800)]
hisi_sas: Add hisi_sas_remove
This patch also includes relevant memory/pool freeing and sas/scsi host
removal.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:34 +0000 (00:50 +0800)]
hisi_sas: Allocate memories and create pools
Allocate DMA and non-DMA memories for the controller. Also create DMA
pools.
These include:
- Delivery queues
- Completion queues
- Command status buffer
- Command table
- ITCT (For device context)
- Host slot info
- IO status
- Breakpoint
- host slot indexing
- SG data
- FIS
- interrupts names
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:33 +0000 (00:50 +0800)]
hisi_sas: Add HW DMA structures
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:32 +0000 (00:50 +0800)]
hisi_sas: Scan device tree
Scan the device tree for all properties. Also do this:
- do ioremap for SAS registers
- allocate memory for interrupt names
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:31 +0000 (00:50 +0800)]
hisi_sas: Add scsi host registration
Add functionality to register device as a scsi host.
The SAS domain transport ops are empty at this point.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:30 +0000 (00:50 +0800)]
hisi_sas: Add initial bare main driver
This patch adds the initial bare main driver for the HiSilicon SAS
HBA. This only introduces the changes to build and load the main driver
module.
The complete driver consists of the core main module and also a module
platform driver for driving the hw.
The HBA is a platform device.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:29 +0000 (00:50 +0800)]
devicetree: bindings: scsi: HiSi SAS
Add devicetree bindings for HiSilicon SAS driver.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 17 Nov 2015 16:50:28 +0000 (00:50 +0800)]
scsi: Centralise ssp frame information units
The xfer_rdy, command, and task frame's iu structures are not available
in <scsi/sas.h>, but only aic94xx driver folder. Add them to
include/scsi/sas.h
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:28 +0000 (19:24 +0100)]
atp870u: Introduce atp870_init()
Move 870-specific init code to a separate function atp870_init()
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:27 +0000 (19:24 +0100)]
atp870u: Introduce atp885_init()
Move 885-specific init code to a separate function atp885_init()
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:26 +0000 (19:24 +0100)]
atp870u: Introduce atp880_init()
Move 880-specific init code to a separate function atp880_init()
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:25 +0000 (19:24 +0100)]
atp870u: Initialize tables earlier
Call _init_tables before chip-specific initialization. This avoids code
duplication and fixes a bug(?) in 880 init where the values read from flash
into atpdev->sp are then overwritten by calling init_tables.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:24 +0000 (19:24 +0100)]
atp870u: Remove scam_on from struct atp_unit
scam_on is used only during probe, no need to keep it later.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:23 +0000 (19:24 +0100)]
atp870u: Request IRQ later, remove weird locking
Allocate IRQ later during probe to avoid code duplication and also
remove the need for weird locking in _probe.
(It was probably there to prevent race with the IRQ handler?)
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:22 +0000 (19:24 +0100)]
atp870u: Use pci_request_regions
Use pci_request_regions and do it before accessing the I/O ports.
Also add missing pci_disable_device() call to atp870u_remove().
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:21 +0000 (19:24 +0100)]
atp870u: Introduce is880(), is885() and remove dev_id
Introduce chip type inline functions to simplify code, allowing to delete
dev_id from struct atp_unit.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:20 +0000 (19:24 +0100)]
atp870u: Simplify _probe()
Move shpnt common code to the top, remove base_io, use pci_resource_len.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:19 +0000 (19:24 +0100)]
atp870u: Remove chip_ver from struct atp_unit
chip_ver is used for wide chip detection only. Remove it and use a local
variable instead (for 870; 880 and 885 are always wide).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:18 +0000 (19:24 +0100)]
atp870u: Improve unsupported chip detection
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:17 +0000 (19:24 +0100)]
atp870u: Improve _probe()
Move scsi_host_alloc() to the top of _probe() to remove code duplication,
*p and unneeded atpdev (de)allocation and copying. While at it, fix the
error paths to return real error codes and also add missing
pci_disble_device() call.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:16 +0000 (19:24 +0100)]
atp870u: Remove unused irq from struct atp_unit
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:15 +0000 (19:24 +0100)]
atp870u: Remove useless and broken card counting
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:14 +0000 (19:24 +0100)]
atp870u: Use n_io_port in request_region and release_region
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:13 +0000 (19:24 +0100)]
atp870u: Use module_pci_driver
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:12 +0000 (19:24 +0100)]
atp870u: Remove empty tscam_885()
tscam_885() is empty (except a delay) so remove it.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:11 +0000 (19:24 +0100)]
atp870u: Reduce log spam on module load/unload
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:10 +0000 (19:24 +0100)]
atp870u: Introduce atp_set_host_id
The code for setting host adapter ID is the same for all chips.
Move it to a common function.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:09 +0000 (19:24 +0100)]
atp870u: Fix incorrect writeb_io access to register 0x3a
The ioport region is 0x20 bytes long so accessing 0x3a register using
writeb_io is incorrect. Use writeb_base instead.
There's no change in behavior as 870 chips have ioport = baseport.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:08 +0000 (19:24 +0100)]
atp870u: Replace port 0x80 delay by udelay
tscam() is using port 0x80 access for delays but that's x86-only.
Use udelay(2) instead.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:07 +0000 (19:24 +0100)]
atp870u: Convert remaining in[bwl] and out[bwl] to wrappers
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:06 +0000 (19:24 +0100)]
atp870u: Rename is885() to atp_is()
Now that all the is* functions except is885() are gone, rename is885() to
atp_is() to avoid confusion. Don't know what "is" means, though...
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:05 +0000 (19:24 +0100)]
atp870u: Remove is870()
Now that is885() supports everything from is870() and the rest of the code
is almost identical, remove is870() and use is885() instead.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:04 +0000 (19:24 +0100)]
atp870u: Move 870-specific code out of is870()
Move few remaining 870-specific code lines out of is870()
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:03 +0000 (19:24 +0100)]
atp870u: Add remaining 870 support to is885()
Add remaining 870 support to is885():
- different synw, no synuw
- synu[4] = 0x0c
- atp_writeb_io(dev, c, 0x04, 0x00); instead of
atp_writeb_io(dev, c, 0x14, 0x00); (isn't that a bug?)
- atp_writeb_io(dev, c, 0x14, 0xff); instead of
atp_writeb_io(dev, c, 0x14, 0x06);
- different mbuf[3] and mbuf[4] checks
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:02 +0000 (19:24 +0100)]
atp870u: Add wide_chip parameter to is870() and is885()
Don't check chip_ver in is870() but add wide_chip parameter for that.
Then add the non-wide support to is885().
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:01 +0000 (19:24 +0100)]
atp870u: Remove is880()
Now that is880() and is885() are almost identical (except for some cpu_relax()
calls and debug printks), remove is880() and use is885() instead.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:24:00 +0000 (19:24 +0100)]
atp870u: Move chip-specific lines out of is880() and is885()
Move few chip-specifis lines out of is880() and is885() so they become
almost identical.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:23:59 +0000 (19:23 +0100)]
atp870u: Add channel parameter to is870() and is880()
Add channel parameter to is870() and is880() functions to simplify comparing
them with is885().
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:23:58 +0000 (19:23 +0100)]
atp870u: Unify code format in is870(), is880() and is885()
Unify code formatting in is870(), is880() and is885() functions to simplify
comparing them.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:23:57 +0000 (19:23 +0100)]
atp870u: Convert is885() to use wrappers
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:23:56 +0000 (19:23 +0100)]
atp870u: Convert is880() to use wrappers
Subtract 0x40 to use _io access wrappers. Now it's obvious that is870()
and is880() are very similar.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ondrej Zary [Tue, 17 Nov 2015 18:23:55 +0000 (19:23 +0100)]
atp870u: Convert is870() to use wrappers
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>