Merge tag 'qga-win32-pull-2022-07-13' of github.com:kostyanf14/qemu into staging

qga-win32-pull-2022-07-13

# gpg: Signature made Wed 13 Jul 2022 11:13:32 BST
# gpg:                using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423  EB84 EF5D 5E81 61BA 84E7

* tag 'qga-win32-pull-2022-07-13' of github.com:kostyanf14/qemu:
  qga: add command 'guest-get-cpustats'
  qapi: Avoid generating C identifier 'linux'
  MAINTAINERS: Add myself as Guest Agent reviewer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'darwin-20220712' of https://github.com/philmd/qemu into staging

Darwin patches:

- Enable RDTSCP support on HVF
- ui/cocoa: Take refresh rate into account

Few buildsys fixes:

- Restrict TCG to emulation
- Remove a unused-but-set-variable warning
- Allow running Avocado from pseudo-"in source tree" builds

# gpg: Signature made Tue 12 Jul 2022 23:14:37 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'darwin-20220712' of https://github.com/philmd/qemu:
  avocado: Fix BUILD_DIR if it's equal to SOURCE_DIR
  ui/cocoa: Take refresh rate into account
  ui/cocoa: Fix switched_to_fullscreen warning
  configure: Restrict TCG to emulation
  hvf: Enable RDTSCP support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'mips-20220712' of https://github.com/philmd/qemu into staging

MIPS patches queue

- Cavium Octeon MIPS extension and CPU model (Pavel Dovgalyuk)
- Semihosting cleanup (Richard Henderson)

# gpg: Signature made Tue 12 Jul 2022 21:52:52 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'mips-20220712' of https://github.com/philmd/qemu:
  target/mips: Remove GET_TARGET_STRING and FREE_TARGET_STRING
  target/mips: Simplify UHI_argnlen and UHI_argn
  semihosting: Remove qemu_semihosting_log_out
  target/mips: Use error_report for UHI_assert
  target/mips: Avoid qemu_semihosting_log_out for UHI_plog
  target/mips: Use semihosting/syscalls.h
  target/mips: Drop link syscall from semihosting
  target/mips: Create report_fault for semihosting
  target/mips: introduce Cavium Octeon CPU model
  target/mips: implement Octeon-specific arithmetic instructions
  target/mips: implement Octeon-specific BBIT instructions
  target/mips: introduce decodetree structure for Cavium Octeon extension

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qga: add command 'guest-get-cpustats'

A vCPU thread always reaches 100% utilization when:
- guest uses idle=poll
- disable HLT vm-exit
- enable MWAIT

Add new guest agent command 'guest-get-cpustats' to get guest CPU
statistics, we can know the guest workload and how busy the CPU is.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220707005602.696557-3-pizhenwei@bytedance.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>

qapi: Avoid generating C identifier 'linux'

'linux' is not usable as identifier, because C compilers targeting
Linux predefine it as a macro expanding to 1.  Add it to
@polluted_words. 'unix' is already there.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220707005602.696557-2-pizhenwei@bytedance.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>

MAINTAINERS: Add myself as Guest Agent reviewer

Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220712092715.2136898-1-kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>

avocado: Fix BUILD_DIR if it's equal to SOURCE_DIR

I like to build QEMU from the root source directory [*], rather
than cd'ing into the build directory. This code may as well include
a search path for that, so that you can run avocado tests individually
without specifying "-p qemu_bin=build/qemu-system-arm" manually.

[*] See commit dedad02720 ("configure: add support for pseudo-"in source tree" builds")

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220702185604.46643-1-peter@pjd.dev>
[PMD: Mention commit dedad02720]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

ui/cocoa: Take refresh rate into account

Retrieve the refresh rate of the display and reflect it with
dpy_set_ui_info() and update_displaychangelistener(), allowing the
guest and DisplayChangeListener to consume the information.

The information will be used as a hint how often the display should
be updated. For example, when we run 30 Hz physical display updates
it is pointless for the guest to update the screen at 60Hz
frequency, the guest can spare some work instead.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220702142519.12188-1-akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

ui/cocoa: Fix switched_to_fullscreen warning

I noticed this error while building QEMU on Mac OS X:

    [1040/1660] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o
    ../ui/cocoa.m:803:17: warning: variable 'switched_to_fullscreen' set but not used [-Wunused-but-set-variable]
        static bool switched_to_fullscreen = false;
                    ^
    1 warning generated.

I think the behavior is fine if you remove "switched_to_fullscreen", I can
still switch in and out of mouse grabbed mode and fullscreen mode with this
change, and Command keycodes will only be passed to the guest if the mouse
is grabbed, which I think is the right behavior. I'm not sure why a static
piece of state was needed to handle that in the first place. Perhaps the
refactoring of the flags-state-change fixed that by toggling the Command
keycode on.

I tested this with an Ubuntu core image on macOS 12.4

    wget https://cdimage.ubuntu.com/ubuntu-core/18/stable/current/ubuntu-core-18-i386.img.xz
    xz -d ubuntu-core-18-i386.img.xz
    qemu-system-x86_64 -drive file=ubuntu-core-18.i386.img,format=raw

Fixes: 6d73bb643aa7 ("ui/cocoa: Clear modifiers whenever possible")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220702044304.90553-1-peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

configure: Restrict TCG to emulation

If we don't need to emulate any target, we certainly don't need TCG.

This should also help to compile again with
 ".../configure --enable-tools --disable-system --disable-user"
on systems that do not have a TCG backend.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: Re-arranged the code, remove check-softfloat from buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220706153816.768143-1-thuth@redhat.com>

hvf: Enable RDTSCP support

Pass through RDPID and RDTSCP support in CPUID if host supports it.
Correctly detect if CPU_BASED_TSC_OFFSET and CPU_BASED2_RDTSCP would
be supported in primary and secondary processor-based VM-execution
controls.  Enable RDTSCP in secondary processor controls if RDTSCP
support is indicated in CPUID.

Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <20220214185605.28087-7-f4bug@amsat.org>
Tested-by: Silvio Moioli <moio@suse.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1011
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: Remove GET_TARGET_STRING and FREE_TARGET_STRING

Inline these macros into the only two callers.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220628111701.677216-9-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: Simplify UHI_argnlen and UHI_argn

With semihosting_get_arg, we already have a check vs argc, so
there's no point replicating it -- just check the result vs NULL.
Merge copy_argn_to_target into its caller.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-8-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

semihosting: Remove qemu_semihosting_log_out

The function is no longer used.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220628111701.677216-7-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: Use error_report for UHI_assert

Always log the assert locally.  Do not report_fault, but
instead include the fact of the fault in the assertion.
Don't bother freeing allocated strings before the abort().

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-6-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: Avoid qemu_semihosting_log_out for UHI_plog

Use semihost_sys_write and/or qemu_semihosting_console_write
for implementing plog.  When using gdbstub, copy the temp
string below the stack so that gdb has a guest address from
which to perform the log.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-5-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: Use semihosting/syscalls.h

This separates guest file descriptors from host file descriptors,
and utilizes shared infrastructure for integration with gdbstub.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: Drop link syscall from semihosting

We don't implement it with _WIN32 hosts, and the syscall
is missing from the gdb remote file i/o interface.
Since we can't implement it universally, drop it.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: Create report_fault for semihosting

The UHI specification does not have an EFAULT value,
and further specifies that "undefined UHI operations
should not return control to the target".

So, log the error and abort.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: introduce Cavium Octeon CPU model

This patch adds Cavium Octeon 68XX vCPU which provides
Octeon-specific instructions.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <165572673785.167724.7604881144978983510.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: implement Octeon-specific arithmetic instructions

This patch implements several Octeon-specific instructions:
- BADDU
- DMUL
- EXTS/EXTS32
- CINS/CINS32
- POP/DPOP
- SEQ/SEQI
- SNE/SNEI

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572673245.167724.17377788816335619000.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: implement Octeon-specific BBIT instructions

This patch introduces Octeon-specific decoder and implements
check-bit-and-jump instructions.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572672705.167724.16667636081912075906.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

target/mips: introduce decodetree structure for Cavium Octeon extension

This patch adds decodetree for Cavium Octeon extension and
an instruction set extension flag for using it in CPU models.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572672162.167724.13656301229517693806.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Merge tag 'pull-block-2022-07-12' of https://gitlab.com/hreitz/qemu into staging

Block patches:
- Refactoring for non-coroutine variants of bdrv/blk_co_* functions:
  Auto-generate more of them with the block coroutine wrapper generator
  script
- iotest fixes
- Both for the storage daemon and the system emulator: Fix PID file
  handling when daemonizing (store the absolute path and delete that on
  exit, which is necessary because daemonizing will change the working
  directory to /)

# gpg: Signature made Tue 12 Jul 2022 19:04:14 BST
# gpg:                using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg:                issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00  4D34 A1FA 40D0 9801 9CDF

* tag 'pull-block-2022-07-12' of https://gitlab.com/hreitz/qemu: (35 commits)
  vl: Unlink absolute PID file path
  vl: Conditionally register PID file unlink notifier
  qsd: Unlink absolute PID file path
  iotests/297: Have mypy ignore unused ignores
  qsd: Do not use error_report() before monitor_init
  block: Remove remaining unused symbols in coroutines.h
  block: Reorganize some declarations in block-backend-io.h
  block: Add blk_co_truncate()
  block: Add blk_co_ioctl()
  block: Implement blk_flush() using generated_co_wrapper
  block: Implement blk_pdiscard() using generated_co_wrapper
  block: Implement blk_pwrite_zeroes() using generated_co_wrapper
  block: Add blk_co_pwrite_compressed()
  block: Change blk_pwrite_compressed() param order
  block: Export blk_pwritev_part() in block-backend-io.h
  block: Add blk_[co_]preadv_part()
  block: Add blk_{preadv,pwritev}()
  block: Implement blk_{pread,pwrite}() using generated_co_wrapper
  block: Make blk_co_pwrite() take a const buffer
  block: Make 'bytes' param of blk_{pread,pwrite}() an int64_t
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* fuzzing fixes (Alexander)
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)

# gpg: Signature made Tue 12 Jul 2022 13:47:19 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
  meson: place default firmware path under .../share
  qga: Relocate a path emitted in the help text
  build: Do not depend on pc-bios for config-host.mak
  accel: kvm: Fix memory leak in find_stats_descriptors
  audio/dbus: fix building
  fuzz: only use generic-fuzz targets on oss-fuzz
  build: improve -fsanitize-coverage-allowlist check
  build: try both native and cross compilers
  configure: pass whole target name to probe_target_compiler
  tests/tcg: compile system emulation tests as freestanding
  configure: write EXTRA_CFLAGS for all sub-Makefiles
  configure: allow more host/target combos to use the host compiler
  configure, pc-bios/vof: pass cross CFLAGS correctly
  configure, pc-bios/s390-ccw: pass cross CFLAGS correctly
  configure, pc-bios/optionrom: pass cross CFLAGS correctly
  pc-bios/optionrom: use -m16 unconditionally
  scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
  tests/vm: do not specify -bios option

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# pc-bios/s390-ccw/netboot.mak

meson: place default firmware path under .../share

Fixes: c09c1ce7e9 ("configure: switch directory options to automatic parsing", 2022-05-07)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vl: Unlink absolute PID file path

After writing the PID file, we register an exit notifier to unlink it
when the process terminates.  However, if the process has changed its
working directory in the meantime (e.g. in os_setup_post() when
daemonizing), this will not work when the PID file path was relative.
Therefore, pass the absolute path (created with realpath()) to the
unlink() call in the exit notifier.

(realpath() needs a path pointing to an existing file, so we cannot use
it before qemu_write_pidfile().)

Reproducer:
$ cd /tmp
$ qemu-system-x86_64 --daemonize --pidfile qemu.pid
$ file qemu.pid
qemu.pid: ASCII text
$ kill $(cat qemu.pid)
$ file qemu.pid
qemu.pid: ASCII text

(qemu.pid should be gone after the process has terminated.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220609122701.17172-4-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

vl: Conditionally register PID file unlink notifier

Currently, the exit notifier for unlinking the PID file is registered
unconditionally.  Limit it to only when we actually do create a PID
file.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220609122701.17172-3-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

qsd: Unlink absolute PID file path

After writing the PID file, we register an atexit() handler to unlink it
when the process terminates.  However, if the process has changed its
working directory in the meantime (e.g. in os_setup_post() when
daemonizing), this will not work when the PID file path was relative.
Therefore, pass the absolute path (created with realpath()) to the
unlink() call in the atexit() handler.

(realpath() needs a path pointing to an existing file, so we cannot use
it before qemu_write_pidfile().)

Reproducer:
$ cd /tmp
$ qemu-storage-daemon --daemonize --pidfile qsd.pid
$ file qsd.pid
qsd.pid: ASCII text
$ kill $(cat qsd.pid)
$ file qsd.pid
qsd.pid: ASCII text

(qsd.pid should be gone after the process has terminated.)

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2092322
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220609122701.17172-2-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

iotests/297: Have mypy ignore unused ignores

e7874a50ff3f5b20fb46f36958ad ("python: update for mypy 0.950") has added
`warn_unused_ignores = False` to python/setup.cfg, to be able to keep
compatibility with both pre- and post-0.950 mypy versions.

The iotests' mypy.ini needs the same, or 297 will fail (on both pre- and
post-0.950 mypy, as far as I can tell; just for different `ignore`
lines).

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220621092536.19837-1-hreitz@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>

qsd: Do not use error_report() before monitor_init

error_report() only works once monitor_init_globals_core() has been
called, which is not the case when parsing the --daemonize option.  Use
fprintf(stderr, ...) instead.

Fixes: 2525edd85fec53e23fda98974a15e3b3c8957596 ("qsd: Add --daemonize")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220609122852.21140-1-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

block: Remove remaining unused symbols in coroutines.h

Some can be made static, others are unused generated_co_wrappers.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-19-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Reorganize some declarations in block-backend-io.h

Keep generated_co_wrapper and coroutine_fn pairs together. This should
make it clear that each I/O function has these two versions.

Also move blk_co_{pread,pwrite}()'s implementations out of the header
file for consistency.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220705161527.1054072-18-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add blk_co_truncate()

Also convert blk_truncate() into a generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-17-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add blk_co_ioctl()

Also convert blk_ioctl() into a generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-16-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Implement blk_flush() using generated_co_wrapper

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-15-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Implement blk_pdiscard() using generated_co_wrapper

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-14-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Implement blk_pwrite_zeroes() using generated_co_wrapper

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-13-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add blk_co_pwrite_compressed()

Also convert blk_pwrite_compressed() into a generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-12-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Change blk_pwrite_compressed() param order

Swap 'buf' and 'bytes' around for consistency with other I/O functions.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-11-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Export blk_pwritev_part() in block-backend-io.h

Also convert it into a generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-10-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add blk_[co_]preadv_part()

Implement blk_preadv_part() using generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-9-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add blk_{preadv,pwritev}()

Implement them using generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-8-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Implement blk_{pread,pwrite}() using generated_co_wrapper

We need to add include/sysemu/block-backend-io.h to the inputs of the
block-gen.c target defined in block/meson.build.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-7-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Make blk_co_pwrite() take a const buffer

It does not mutate the buffer.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-6-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Make 'bytes' param of blk_{pread,pwrite}() an int64_t

For consistency with other I/O functions, and in preparation to
implement them using generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-5-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Change blk_{pread,pwrite}() param order

Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.

Callers were updated using this Coccinelle script:

    @@ expression blk, offset, buf, bytes, flags; @@
    - blk_pread(blk, offset, buf, bytes, flags)
    + blk_pread(blk, offset, bytes, buf, flags)

    @@ expression blk, offset, buf, bytes, flags; @@
    - blk_pwrite(blk, offset, buf, bytes, flags)
    + blk_pwrite(blk, offset, bytes, buf, flags)

It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.

Overly-long lines were then fixed by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add a 'flags' param to blk_pread()

For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.

Callers were updated using this Coccinelle script:

    @@ expression blk, offset, buf, bytes; @@
    - blk_pread(blk, offset, buf, bytes)
    + blk_pread(blk, offset, buf, bytes, 0)

It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.

Overly-long lines were then fixed by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Make blk_{pread,pwrite}() return 0 on success

They currently return the value of their 'bytes' parameter on success.

Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220705161527.1054072-2-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

tests/qemu-iotests: skip 108 when FUSE is not loaded

In certain container environments we may not have FUSE at all, so skip
the test in this circumstance too.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220616142659.3184115-3-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

tests/qemu-iotests: hotfix for 307, 223 output

Fixes: 58a6fdcc
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220616142659.3184115-2-jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block/qcow2: Use bdrv_pwrite_sync() in qcow2_mark_dirty()

Use bdrv_pwrite_sync() instead of calling bdrv_pwrite() and bdrv_flush()
separately.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-11-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Use bdrv_co_pwrite_sync() when caller is coroutine_fn

Convert uses of bdrv_pwrite_sync() into bdrv_co_pwrite_sync() when the
callers are already coroutine_fn.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-10-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add bdrv_co_pwrite_sync()

Also convert bdrv_pwrite_sync() to being implemented using
generated_co_wrapper.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-9-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Implement bdrv_{pread,pwrite,pwrite_zeroes}() using generated_co_wrapper

bdrv_{pread,pwrite}() now return -EIO instead of -EINVAL when 'bytes' is
negative, making them consistent with bdrv_{preadv,pwritev}() and
bdrv_co_{pread,pwrite,preadv,pwritev}().

bdrv_pwrite_zeroes() now also calls trace_bdrv_co_pwrite_zeroes() and
clears the BDRV_REQ_MAY_UNMAP flag when appropriate, which it didn't
previously.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220609152744.3891847-8-afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Make 'bytes' param of bdrv_co_{pread,pwrite,preadv,pwritev}() an int64_t

For consistency with other I/O functions, and in preparation to
implement bdrv_{pread,pwrite}() using generated_co_wrapper.

unsigned int fits in int64_t, so all callers remain correct.

bdrv_check_request32() is called further down the stack and causes -EIO
to be returned if 'bytes' is negative or greater than
BDRV_REQUEST_MAX_BYTES, which in turns never exceeds SIZE_MAX.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220609152744.3891847-7-afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Make bdrv_co_pwrite() take a const buffer

It does not mutate the buffer.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-6-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

crypto: Make block callbacks return 0 on success

They currently return the value of their headerlen/buflen parameter on
success. Returning 0 instead makes it clear that short reads/writes are
not possible.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-5-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Make bdrv_{pread,pwrite}() return 0 on success

They currently return the value of their 'bytes' parameter on success.

Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.

The few callers that rely on the previous behavior are adjusted
accordingly by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-4-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Change bdrv_{pread,pwrite,pwrite_sync}() param order

Swap 'buf' and 'bytes' around for consistency with
bdrv_co_{pread,pwrite}(), and in preparation to implement these
functions using generated_co_wrapper.

Callers were updated using this Coccinelle script:

    @@ expression child, offset, buf, bytes, flags; @@
    - bdrv_pread(child, offset, buf, bytes, flags)
    + bdrv_pread(child, offset, bytes, buf, flags)

    @@ expression child, offset, buf, bytes, flags; @@
    - bdrv_pwrite(child, offset, buf, bytes, flags)
    + bdrv_pwrite(child, offset, bytes, buf, flags)

    @@ expression child, offset, buf, bytes, flags; @@
    - bdrv_pwrite_sync(child, offset, buf, bytes, flags)
    + bdrv_pwrite_sync(child, offset, bytes, buf, flags)

Resulting overly-long lines were then fixed by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220609152744.3891847-3-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

block: Add a 'flags' param to bdrv_{pread,pwrite,pwrite_sync}()

For consistency with other I/O functions, and in preparation to
implement them using generated_co_wrapper.

Callers were updated using this Coccinelle script:

    @@ expression child, offset, buf, bytes; @@
    - bdrv_pread(child, offset, buf, bytes)
    + bdrv_pread(child, offset, buf, bytes, 0)

    @@ expression child, offset, buf, bytes; @@
    - bdrv_pwrite(child, offset, buf, bytes)
    + bdrv_pwrite(child, offset, buf, bytes, 0)

    @@ expression child, offset, buf, bytes; @@
    - bdrv_pwrite_sync(child, offset, buf, bytes)
    + bdrv_pwrite_sync(child, offset, buf, bytes, 0)

Resulting overly-long lines were then fixed by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220609152744.3891847-2-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests/copy-before-write: specify required_fmts

Declare that we need copy-before-write filter to avoid failure when
filter is not whitelisted.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220706170834.242277-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

iotests: fix copy-before-write for macOS and FreeBSD

strerror() represents ETIMEDOUT a bit different in Linux and macOS /
FreeBSD. Let's support the latter too.

Fixes: 9d05a87b77 ("iotests: copy-before-write: add cases for cbw-timeout option")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705153708.186418-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

gitlab-ci/cirrus: Update freebsd to python 3.9 packages

FreeBSD has stopped shipping python 3.8, causing our cirrus
builds to fail immediately.  Upstream lcitool has an update
to address this, but has also reorganized its source tree so
additional changes are required for 'make lcitool-update'.

In the meantime, fix the build.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-tcg-20220712' of https://gitlab.com/rth7680/qemu into staging

Fix for duplicate tlb check on unaligned access.
Fix for w^x code gen buffer mapping.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmLNEksdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8KPwf9EybXFrlI1u9A2nOK
# 8puFCKdN7eGjYo2dkRd/CyqugmsaS3IuL9cooWi7/A6pOtyuIWdlyI/r+PAZat3p
# GfvZvx9GejWpbUv6GYX2extZAev1EbhaaM6ZOg/EZGOWTjiINZMztuIWhbjftRUj
# 6E8FLkj/5PWQzYvi6TbMMAMqg5QsYERZIZ4SfDfjE2a8s8rloYDBdvVEaG35NOa/
# pv93clb7OrnE5VyJLHyfs8VwpbtJKsQy/Twwh1+828X/fetwJWT5AKfPZTIHLELL
# tVuABJA25wSfPPmjtXTzDjq5x5/UWKc16Zvk1tbcxuknLegxUH0Agy+qJRI3x5FA
# M3ZHOg==
# =b4EN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Jul 2022 11:48:51 AM +0530
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-tcg-20220712' of https://gitlab.com/rth7680/qemu:
  accel/tcg: Fix unaligned stores to s390x low-address-protected lowcore
  tcg: Fix returned type in alloc_code_gen_buffer_splitwx_memfd()

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Fix unaligned stores to s390x low-address-protected lowcore

If low-address-protection is active, unaligned stores to non-protected
parts of lowcore lead to protection exceptions. The reason is that in
such cases tlb_fill() call in store_helper_unaligned() covers
[0, addr + size) range, which contains the protected portion of
lowcore. This range is too large.

The most straightforward fix would be to make sure we stay within the
original [addr, addr + size) range. However, if an unaligned access
affects a single page, we don't need to call tlb_fill() in
store_helper_unaligned() at all, since it would be identical to
the previous tlb_fill() call in store_helper(), and therefore a no-op.
If an unaligned access covers multiple pages, this situation does not
occur.

Therefore simply skip TLB handling in store_helper_unaligned() if we
are dealing with a single page.

Fixes: 2bcf018340cb ("s390x/tcg: low-address protection support")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220711185640.3558813-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Fix returned type in alloc_code_gen_buffer_splitwx_memfd()

This fixes a bug in POSIX-compliant environments. Since we had allocated
a buffer named 'tcg-jit' with read-write access protections we need a int
type to combine these access flags and return it, whereas we had inexplicably
return a bool type. It may cause an unnecessary protection change in
tcg_region_init().

Cc: qemu-stable@nongnu.org
Fixes: 7be9ebcf924c ("tcg: Return the map protection from alloc_code_gen_buffer")
Signed-off-by: Shaobo Song <shnusongshaobo@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220624150216.3627-1-shnusongshaobo@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-target-arm-20220711' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm:
 * Implement SME emulation, for both system and linux-user

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmLMLC8ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sR6D/wN7+rQ86FnPEpeqqh37Chx
# dyCwmAjad7cSJWY4d6RlhNBll35D2nPIdo7MQrUi7ViNL+mDRGr4xSeYOU3IBXd7
# hxRY2rAjwlVtpL6WWJkHeZTr7n+gHtds/Pda+f7d8E7RmsXtD4uRSnbGG82HVGy0
# suG6MJwDYncSoa4AlX/J6sBBYha0cusTguTbkGkEfRonKgvQ6PAogYU8zAmI4EEz
# BsdhXOjH3FGO6aUUVjZKJd1CuISNYe32sZY1OcfuiB1KbBQaRHt2LbxfKSQGMKwd
# 0GzXZK9NJ0xIteAX/ESHVakudennqaBY7kdbBdLwb485pQ25r7P2jGyPM4J4fota
# fXScOQKGGVfNySPwTOPR0QLzshcckWw7+Y+AOBg/rpbepSNT41bwI6Ldjs8oNtcI
# O44wNgbN4uvbVul4dj0rOrc5azMvfH0cU+SSrZAInahEHpCN9o/NQz1D2fju7j9W
# MujJCzRVBQSCvUwD1jX6+YDTJU3y84HeGYB/whXt8tg67Ump/5IgUInACgQzwwEZ
# ZP+vxFmhuMlIkbfaiDgYdx2CLjTVSJ7YHjGx/rkqlpLVx6DgGA0klzgHV4L8fbWh
# RFY8fejQve5QzsdiiDdeRWigFY2LnDEnphwOAy7tzktRpai8FnK3aMZyIj/5WODL
# uu+gSmYoToLhC35Uan5otg==
# =D1/T
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Jul 2022 07:27:03 PM +0530
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220711' of https://git.linaro.org/people/pmaydell/qemu-arm: (45 commits)
  linux-user/aarch64: Add SME related hwcap entries
  target/arm: Enable SME for user-only
  target/arm: Only set ZEN in reset if SVE present
  linux-user/aarch64: Implement PR_SME_GET_VL, PR_SME_SET_VL
  linux-user: Rename sve prctls
  linux-user/aarch64: Implement SME signal handling
  linux-user/aarch64: Move sve record checks into restore
  linux-user/aarch64: Verify extra record lock succeeded
  linux-user/aarch64: Do not allow duplicate or short sve records
  linux-user/aarch64: Tidy target_restore_sigframe error return
  linux-user/aarch64: Add SM bit to SVE signal context
  linux-user/aarch64: Reset PSTATE.SM on syscalls
  linux-user/aarch64: Clear tpidr2_el0 if CLONE_SETTLS
  target/arm: Enable SME for -cpu max
  target/arm: Reset streaming sve state on exception boundaries
  target/arm: Implement SCLAMP, UCLAMP
  target/arm: Implement REVD
  target/arm: Implement PSEL
  target/arm: Implement SME integer outer product
  target/arm: Implement FMOPA, FMOPS (widening)
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/aarch64: Add SME related hwcap entries

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Enable SME for user-only

Enable SME, TPIDR2_EL0, and FA64 if supported by the cpu.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-45-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Only set ZEN in reset if SVE present

There's no reason to set CPACR_EL1.ZEN if SVE disabled.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Implement PR_SME_GET_VL, PR_SME_SET_VL

These prctl set the Streaming SVE vector length, which may
be completely different from the Normal SVE vector length.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user: Rename sve prctls

Add "sve" to the sve prctl functions, to distinguish
them from the coming "sme" prctls with similar names.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Implement SME signal handling

Set the SM bit in the SVE record on signal delivery, create the ZA record.
Restore SM and ZA state according to the records present on return.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Move sve record checks into restore

Move the checks out of the parsing loop and into the
restore function.  This more closely mirrors the code
structure in the kernel, and is slightly clearer.

Reject rather than silently skip incorrect VL and SVE record sizes,
bringing our checks in to line with those the kernel does.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Verify extra record lock succeeded

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-39-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Do not allow duplicate or short sve records

In parse_user_sigframe, the kernel rejects duplicate sve records,
or records that are smaller than the header.  We were silently
allowing these cases to pass, dropping the record.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Tidy target_restore_sigframe error return

Fold the return value setting into the goto, so each
point of failure need not do both.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Add SM bit to SVE signal context

Make sure to zero the currently reserved fields.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Reset PSTATE.SM on syscalls

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Clear tpidr2_el0 if CLONE_SETTLS

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Enable SME for -cpu max

Note that SME remains effectively disabled for user-only,
because we do not yet set CPACR_EL1.SMEN.  This needs to
wait until the kernel ABI is implemented.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Reset streaming sve state on exception boundaries

We can handle both exception entry and exception return by
hooking into aarch64_sve_change_el.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SCLAMP, UCLAMP

This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement REVD

This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement PSEL

This is an SVE instruction that operates using the SVE vector
length but that it is present only if SME is implemented.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SME integer outer product

This is SMOPA, SUMOPA, USMOPA_s, UMOPA, for both Int8 and Int16.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement FMOPA, FMOPS (widening)

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement BFMOPA, BFMOPS

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement FMOPA, FMOPS (non-widening)

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SME ADDHA, ADDVA

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SME LDR, STR

We can reuse the SVE functions for LDR and STR, passing in the
base of the ZA vector and a zero offset.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Export unpredicated ld/st from translate-sve.c

Add a TCGv_ptr base argument, which will be cpu_env for SVE.
We will reuse this for SME save and restore array insns.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SME LD1, ST1

We cannot reuse the SVE functions for LD[1-4] and ST[1-4],
because those functions accept only a Zreg register number.
For SME, we want to pass a pointer into ZA storage.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SME MOVA

We can reuse the SVE functions for implementing moves to/from
horizontal tile slices, but we need new ones for moves to/from
vertical tile slices.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SME ZERO

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SME RDSVL, ADDSVL, ADDSPL

These SME instructions are nominally within the SVE decode space,
so we add them to sve.decode and translate-sve.c.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Handle SME in sve_access_check

The pseudocode for CheckSVEEnabled gains a check for Streaming
SVE mode, and for SME present but SVE absent.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add SME enablement checks

These functions will be used to verify that the cpu
is in the correct state for a given instruction.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Mark LD1RO as non-streaming

Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>