OSDN Git Service
David Howells [Sat, 17 Sep 2016 10:13:31 +0000 (11:13 +0100)]
rxrpc: Add a tracepoint to follow what recvmsg does
Add a tracepoint to follow what recvmsg does within AF_RXRPC.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:13 +0000 (10:49 +0100)]
rxrpc: Add a tracepoint to follow packets in the Rx buffer
Add a tracepoint to follow the life of packets that get added to a call's
receive buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:13 +0000 (10:49 +0100)]
rxrpc: Add a tracepoint to log ACK transmission
Add a tracepoint to log information about ACK transmission.
Signed-off-by: David Howels <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:13 +0000 (10:49 +0100)]
rxrpc: Add a tracepoint to log received ACK packets
Add a tracepoint to log information from received ACK packets.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:13 +0000 (10:49 +0100)]
rxrpc: Add a tracepoint to follow the life of a packet in the Tx buffer
Add a tracepoint to follow the insertion of a packet into the transmit
buffer, its transmission and its rotation out of the buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:14 +0000 (10:49 +0100)]
rxrpc: Add connection tracepoint and client conn state tracepoint
Add a pair of tracepoints, one to track rxrpc_connection struct ref
counting and the other to track the client connection cache state.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:14 +0000 (10:49 +0100)]
rxrpc: Add some additional call tracing
Add additional call tracepoint points for noting call-connected,
call-released and connection-failed events.
Also fix one tracepoint that was using an integer instead of the
corresponding enum value as the point type.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:13 +0000 (10:49 +0100)]
rxrpc: Print the packet type name in the Rx packet trace
Print a symbolic packet type name for each valid received packet in the
trace output, not just a number.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:12 +0000 (10:49 +0100)]
rxrpc: Fix the basic transmit DATA packet content size at 1412 bytes
Fix the basic transmit DATA packet content size at 1412 bytes so that they
can be arbitrarily assembled into jumbo packets.
In the future, I'm thinking of moving to keeping a jumbo packet header at
the beginning of each packet in the Tx queue and creating the packet header
on the spot when kernel_sendmsg() is invoked. That way, jumbo packets can
be assembled on the spur of the moment for (re-)transmission.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:12 +0000 (10:49 +0100)]
rxrpc: Be consistent about switch value in rxrpc_send_call_packet()
rxrpc_send_call_packet() should use type in both its switch-statements
rather than using pkt->whdr.type. This might give the compiler an easier
job of uninitialised variable checking.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:13 +0000 (10:49 +0100)]
rxrpc: Don't transmit an ACK if there's no reason set
Don't transmit an ACK if call->ackr_reason in unset. There's the
possibility of a race between recvmsg() sending an ACK and the background
processing thread trying to send the same one.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:12 +0000 (10:49 +0100)]
rxrpc: Fix retransmission algorithm
Make the retransmission algorithm use for-loops instead of do-loops and
move the counter increments into the for-statement increment slots.
Though the do-loops are slighly more efficient since there will be at least
one pass through the each loop, the counter increments are harder to get
right as the continue-statements skip them.
Without this, if there are any positive acks within the loop, the do-loop
will cycle forever because the counter increment is never done.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:12 +0000 (10:49 +0100)]
rxrpc: Fix the parsing of soft-ACKs
The soft-ACK parser doesn't increment the pointer into the soft-ACK list,
resulting in the first ACK/NACK value being applied to all the relevant
packets in the Tx queue. This has the potential to miss retransmissions
and cause excessive retransmissions.
Fix this by incrementing the pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:12 +0000 (10:49 +0100)]
rxrpc: Fix unexposed client conn release
If the last call on a client connection is release after the connection has
had a bunch of calls allocated but before any DATA packets are sent (so
that it's not yet marked RXRPC_CONN_EXPOSED), an assertion will happen in
rxrpc_disconnect_client_call().
af_rxrpc: Assertion failed - 1(0x1) >= 2(0x2) is false
------------[ cut here ]------------
kernel BUG at ../net/rxrpc/conn_client.c:753!
This is because it's expecting the conn to have been exposed and to have 2
or more refs - but this isn't necessarily the case.
Simply remove the assertion. This allows the conn to be moved into the
inactive state and deleted if it isn't resurrected before the final put is
called.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:12 +0000 (10:49 +0100)]
rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()
Call rxrpc_release_call() on getting an error in rxrpc_new_client_call()
rather than trying to do the cleanup ourselves. This isn't a problem,
provided we set RXRPC_CALL_HAS_USERID only if we actually add the call to
the calls tree as cleanup code fragments that would otherwise cause
problems are conditional.
Without this, we miss some of the cleanup.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:12 +0000 (10:49 +0100)]
rxrpc: Fix the putting of client connections
In rxrpc_put_one_client_conn(), if a connection has RXRPC_CONN_COUNTED set
on it, then it's accounted for in rxrpc_nr_client_conns and may be on
various lists - and this is cleaned up correctly.
However, if the connection doesn't have RXRPC_CONN_COUNTED set on it, then
the put routine returns rather than just skipping the extra bit of cleanup.
Fix this by making the extra bit of clean up conditional instead and always
killing off the connection.
This manifests itself as connections with a zero usage count hanging around
in /proc/net/rxrpc_conns because the connection allocated, but discarded,
due to a race with another process that set up a parallel connection, which
was then shared instead.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:11 +0000 (10:49 +0100)]
rxrpc: Purge the to_be_accepted queue on socket release
Purge the queue of to_be_accepted calls on socket release. Note that
purging sock_calls doesn't release the ref owned by to_be_accepted.
Probably the sock_calls list is redundant given a purges of the recvmsg_q,
the to_be_accepted queue and the calls tree.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:11 +0000 (10:49 +0100)]
rxrpc: Record calls that need to be accepted
Record calls that need to be accepted using sk_acceptq_added() otherwise
the backlog counter goes negative because sk_acceptq_removed() is called.
This causes the preallocator to malfunction.
Calls that are preaccepted by AFS within the kernel aren't affected by
this.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:11 +0000 (10:49 +0100)]
rxrpc: Fix handling of the last packet in rxrpc_recvmsg_data()
The code for determining the last packet in rxrpc_recvmsg_data() has been
using the RXRPC_CALL_RX_LAST flag to determine if the rx_top pointer points
to the last packet or not. This isn't a good idea, however, as the input
code may be running simultaneously on another CPU and that sets the flag
*before* updating the top pointer.
Fix this by the following means:
(1) Restrict the use of RXRPC_CALL_RX_LAST to the input routines only.
There's otherwise a synchronisation problem between detecting the flag
and checking tx_top. This could probably be dealt with by appropriate
application of memory barriers, but there's a simpler way.
(2) Set RXRPC_CALL_RX_LAST after setting rx_top.
(3) Make rxrpc_rotate_rx_window() consult the flags header field of the
DATA packet it's about to discard to see if that was the last packet.
Use this as the basis for ending the Rx phase. This shouldn't be a
problem because the recvmsg side of things is guaranteed to see the
packets in order.
(4) Make rxrpc_recvmsg_data() return 1 to indicate the end of the data if:
(a) the packet it has just processed is marked as RXRPC_LAST_PACKET
(b) the call's Rx phase has been ended.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:11 +0000 (10:49 +0100)]
rxrpc: Check the return value of rxrpc_locate_data()
Check the return value of rxrpc_locate_data() in rxrpc_recvmsg_data().
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:11 +0000 (10:49 +0100)]
rxrpc: Move the check of rx_pkt_offset from rxrpc_locate_data() to caller
Move the check of rx_pkt_offset from rxrpc_locate_data() to the caller,
rxrpc_recvmsg_data(), so that it's more clear what's going on there.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 09:49:11 +0000 (10:49 +0100)]
rxrpc: Remove some whitespace.
Remove a tab that's on a line that should otherwise be blank.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Sat, 17 Sep 2016 06:26:01 +0000 (07:26 +0100)]
rxrpc: Make IPv6 support conditional on CONFIG_IPV6
Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it.
This is then made conditional on CONFIG_IPV6.
Without this, the following can be seen:
net/built-in.o: In function `rxrpc_init_peer':
>> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 08:31:56 +0000 (04:31 -0400)]
Merge branch 'QCA8K'
John Crispin says:
====================
net-next: dsa: add QCA8K support
This series is based on the AR8xxx series posted by Matthieu Olivari in may
2015. The following changes were made since then
* fixed the nitpicks from the previous review
* updated to latest API
* turned it into an mdio device
* added callbacks for fdb, bridge offloading, stp, eee, port status
* fixed several minor issues to the port setup and arp learning
* changed the namespacing as this driver to qca8k
The driver has so far only been tested on qca8337/N. It should work on other QCA
switches such as the qca8327 with minor changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Thu, 15 Sep 2016 14:26:41 +0000 (16:26 +0200)]
net-next: dsa: add new driver for qca8xxx family
This patch contains initial support for the QCA8337 switch. It
will detect a QCA8337 switch, if present and declared in the DT.
Each port will be represented through a standalone net_device interface,
as for other DSA switches. CPU can communicate with any of the ports by
setting an IP@ on ethN interface. Most of the extra callbacks of the DSA
subsystem are already supported, such as bridge offloading, stp, fdb.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Thu, 15 Sep 2016 14:26:40 +0000 (16:26 +0200)]
net-next: dsa: add Qualcomm tag RX/TX handler
Add support for the 2-bytes Qualcomm tag that gigabit switches such as
the QCA8337/N might insert when receiving packets, or that we need
to insert while targeting specific switch ports. The tag is inserted
directly behind the ethernet header.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Thu, 15 Sep 2016 14:26:39 +0000 (16:26 +0200)]
Documentation: devicetree: add qca8k binding
Add device-tree binding for ar8xxx switch families.
Cc: devicetree@vger.kernel.org
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:26:10 +0000 (02:26 +0000)]
net: emac: remove .owner field for driver
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:25:52 +0000 (02:25 +0000)]
net: emac: remove unnecessary dev_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:24:37 +0000 (02:24 +0000)]
net: dsa: b53: Remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 15 Sep 2016 02:24:13 +0000 (02:24 +0000)]
net: dsa: bcm_sf2: Fix non static symbol warning
Fixes the following sparse warning:
drivers/net/dsa/bcm_sf2.c:963:19: warning:
symbol 'bcm_sf2_io_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 14 Sep 2016 05:55:05 +0000 (22:55 -0700)]
tcp: fix a stale ooo_last_skb after a replace
When skb replaces another one in ooo queue, I forgot to also
update tp->ooo_last_skb as well, if the replaced skb was the last one
in the queue.
To fix this, we simply can re-use the code that runs after an insertion,
trying to merge skbs at the right of current skb.
This not only fixes the bug, but also remove all small skbs that might
be a subset of the new one.
Example:
We receive segments 2001:3001, 4001:5001
Then we receive 2001:8001 : We should replace 2001:3001 with the big
skb, but also remove 4001:50001 from the queue to save space.
packetdrill test demonstrating the bug
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+0.100 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0.01 < . 1001:2001(1000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001>
+0.01 < . 1001:3001(2000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001>
Fixes:
9f5afeae5152 ("tcp: use an RB tree for ooo receive queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Cc: Yaogong Wang <wygivan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 06:23:06 +0000 (02:23 -0400)]
Merge branch 'mediatek-reset-flow'
Sean Wang says:
====================
mediatek: add enhancement into the existing reset flow
Current driver only resets DMA used by descriptor rings which
can't guarantee it can recover all various kinds of fatal
errors, so the patch
1) tries to reset the underlying hardware resource from scratch on
Mediatek SoC required for ethernet running.
2) refactors code in order to the reusability of existing code.
3) considers handling for race condition between the reset flow and
callbacks registered into core driver called about hardware accessing.
4) introduces power domain usage to hardware setup which leads to have
cleanly and completely restore to the state as the initial.
Changes since v1:
- fix the build error with module built causing undefined symbol for
pinctrl_bind_pins, so using pinctrl_select_state instead accomplishes
the pin mux setup during the reset process.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:21 +0000 (23:13 +0800)]
net: ethernet: mediatek: avoid race condition during the reset process
add the protection of the race condition between
the reset process and hardware access happening
on the related callbacks.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:20 +0000 (23:13 +0800)]
net: ethernet: mediatek: add more resets for internal ethernet circuit block
struct mtk_eth has already contained struct regmap ethsys pointer
to the address range of the internal circuit reset, so we reuse it
to reset more internal blocks on ethernet hardware such as packet
processing engine (PPE) and frame engine (FE) instead of rstc which
deals with FE only.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:19 +0000 (23:13 +0800)]
net: ethernet: mediatek: add the whole ethernet reset into the reset process
1) original driver only resets DMA used by descriptor rings
which can't guarantee it can recover all various kinds of fatal
errors, so the patch tries to reset the underlying hardware
resource from scratch on Mediatek SoC required for ethernet
running, including power, pin mux control, clock and internal
circuits on the ethernet in order to restore into the initial
state which the rebooted machine gives.
2) add state variable inside structure mtk_eth to help distinguish
mtk_hw_init is called between the initialization during boot time
or re-initialization during the reset process.
3) add ge_mode variable inside structure mtk_mac for restoring
the interface mode of the current setup for the target MAC.
4) remove __init attribute from mtk_hw_init definition
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:18 +0000 (23:13 +0800)]
net: ethernet: mediatek: add controlling power domain the ethernet belongs to
introduce power domain control which the digital circuit of
the ethernet belongs to inside the flow of hardware initialization
and deinitialization which helps the entire ethernet hardware block
could restart cleanly and completely as being back to the initial
state when the whole machine reboot.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:17 +0000 (23:13 +0800)]
net: ethernet: mediatek: cleanup error path inside mtk_hw_init
This cleans up the error path inside mtk_hw_init call, causing it able
to exit appropriately when something fails and also includes refactoring
mtk_cleanup call to make the partial logic reusable on the error path.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:16 +0000 (23:13 +0800)]
net: ethernet: mediatek: add mtk_hw_deinit call as the opposite to mtk_hw_init call
grouping things related to the deinitialization of what
mtk_hw_init call does that help to be reused by the reset
process and the error path handling.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Wed, 14 Sep 2016 15:13:15 +0000 (23:13 +0800)]
net: ethernet: mediatek: refactoring mtk_hw_init to be reused
the existing mtk_hw_init includes hardware and software
initialization inside so that it is slightly hard to reuse
them for the process of the reset recovery, so some splitting
is made here for keeping hardware initializing relevant thing
and the else such as IRQ registration and MDIO initialization
what are all about to the interface of core driver moved to the
other proper place because they have no needs to register IRQ and
re-initialize structure again during the reset process.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 05:57:19 +0000 (01:57 -0400)]
Merge tag 'rxrpc-rewrite-
20160913-2' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Support IPv6
Here is a set of patches that add IPv6 support. They need to be applied on
top of the just-posted miscellaneous fix patches. They are:
(1) Make autobinding of an unconnected socket work when sendmsg() is
called to initiate a client call.
(2) Don't specify the protocol when creating the client socket, but rather
take the default instead.
(3) Use rxrpc_extract_addr_from_skb() in a couple of places that were
doing the same thing manually. This allows the IPv6 address
extraction to be done in fewer places.
(4) Add IPv6 support. With this, calls can be made to IPv6 servers from
userspace AF_RXRPC programs; AFS, however, can't use IPv6 yet as the
RPC calls need to be upgradeable.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 05:52:20 +0000 (01:52 -0400)]
Merge tag 'rxrpc-rewrite-
20160913-1' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Miscellaneous fixes
Here's a set of miscellaneous fix patches. There are a couple of points of
note:
(1) There is one non-fix patch that adjusts the call ref tracking
tracepoint to make kernel API-held refs on calls more obvious. This
is a prerequisite for the patch that fixes prealloc refcounting.
(2) The final patch alters how jumbo packets that partially exceed the
receive window are handled. Previously, space was being left in the
Rx buffer for them, but this significantly hurts performance as the Rx
window can't be increased to match the OpenAFS Tx window size.
Instead, the excess subpackets are discarded and an EXCEEDS_WINDOW ACK
is generated for the first. To avoid the problem of someone trying to
run the kernel out of space by feeding the kernel a series of
overlapping maximal jumbo packets, we stop allowing jumbo packets on a
call if we encounter more than three jumbo packets with duplicate or
excessive subpackets.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 00:49:30 +0000 (20:49 -0400)]
Merge branch 'libcxgb-next'
Varun Prakash says:
====================
iw_cxgb4,cxgbit: remove duplicate code
This patch series removes duplicate code from
iw_cxgb4 and cxgbit by adding common function
definitions in libcxgb.
Please review.
====================
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:06 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_rx_data_ack()
Add cxgb_mk_rx_data_ack() to remove duplicate
code to form CPL_RX_DATA_ACK hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:05 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_abort_rpl()
Add cxgb_mk_abort_rpl() to remove duplicate
code to form CPL_ABORT_RPL hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:04 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_abort_req()
Add cxgb_mk_abort_req() to remove duplicate code
to form CPL_ABORT_REQ hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:03 +0000 (21:24 +0530)]
libcxgb, iw_cxgb4, cxgbit: add cxgb_mk_close_con_req()
Add cxgb_mk_close_con_req() to remove duplicate
code to form CPL_CLOSE_CON_REQ hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:02 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_mk_tid_release()
Add cxgb_mk_tid_release() to remove duplicate code
to form CPL_TID_RELEASE hardware command.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:01 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_compute_wscale()
Add cxgb_compute_wscale() in libcxgb_cm.h to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:54:00 +0000 (21:24 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_best_mtu()
Add cxgb_best_mtu() in libcxgb_cm.h to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:59 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_is_neg_adv()
Add cxgb_is_neg_adv() in libcxgb_cm.h to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:58 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route6()
Add cxgb_find_route6() in libcxgb_cm.c to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:57 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()
Add cxgb_find_route() in libcxgb_cm.c to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Varun Prakash [Tue, 13 Sep 2016 15:53:56 +0000 (21:23 +0530)]
libcxgb,iw_cxgb4,cxgbit: add cxgb_get_4tuple()
Add cxgb_get_4tuple() in libcxgb_cm.c to remove
it's duplicate definitions from cxgb4/cm.c and
cxgbit/cxgbit_cm.c.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lance Richardson [Tue, 13 Sep 2016 14:08:54 +0000 (10:08 -0400)]
openvswitch: avoid deferred execution of recirc actions
The ovs kernel data path currently defers the execution of all
recirc actions until stack utilization is at a minimum.
This is too limiting for some packet forwarding scenarios due to
the small size of the deferred action FIFO (10 entries). For
example, broadcast traffic sent out more than 10 ports with
recirculation results in packet drops when the deferred action
FIFO becomes full, as reported here:
http://openvswitch.org/pipermail/dev/2016-March/067672.html
Since the current recursion depth is available (it is already tracked
by the exec_actions_level pcpu variable), we can use it to determine
whether to execute recirculation actions immediately (safe when
recursion depth is low) or defer execution until more stack space is
available.
With this change, the deferred action fifo size becomes a non-issue
for currently failing scenarios because it is no longer used when
there are three or fewer recursions through ovs_execute_actions().
Suggested-by: Pravin Shelar <pshelar@ovn.org>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 16 Sep 2016 00:27:30 +0000 (20:27 -0400)]
Merge branch 'cls_flower-port-masks'
Or Gerlitz says:
====================
net/sched: cls_flower: Add ports masks
This series adds the ability to specify tcp/udp ports masks
for TC/flower filter matches.
I also removed an unused fields from the flower keys struct
and clarified the format of the recently added vlan attibutes.
v1--> v2 changes:
* fixes typo in patch #2 title and change log (Sergei)
* added acks provided by Jiri on v1
FWIW, by mistake the cover letter of V1 (but not the patches)
carried V2 tag, hope this doesn't create too much confusion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 15 Sep 2016 12:28:24 +0000 (15:28 +0300)]
net/sched: cls_flower: Specify vlan attributes format in the UAPI header
Specify the format (size and endianess) for the vlan attributes.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 15 Sep 2016 12:28:23 +0000 (15:28 +0300)]
net/sched: cls_flower: Remove an unused field from the filter key structure
Commit
c3f8324188fa "net: Add full IPv6 addresses to flow_keys" added an
unused instance of struct flow_dissector_key_addrs into struct fl_flow_key,
remove it.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 15 Sep 2016 12:28:22 +0000 (15:28 +0300)]
net/sched: cls_flower: Support masking for matching on tcp/udp ports
Add the definitions for src/dst udp/tcp port masks and use
them when setting && dumping the relevant keys.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Regnery [Tue, 13 Sep 2016 10:06:57 +0000 (12:06 +0200)]
alx: fix error handling in __alx_open
In commit
9ee7b683ea63 we moved the enablement of msi interrupts earlier in
alx_init_intr. If there is an error in alx_alloc_rings, __alx_open returns
with an error but msi (or msi-x) interrupts stays enabled. Add a new error
label to disable msi (or msi-x) interrupts.
Fixes:
9ee7b683ea63 ("alx: refactor msi enablement and disablement")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Tue, 13 Sep 2016 08:09:24 +0000 (13:39 +0530)]
cxgb4vf: don't offload Rx checksums for IPv6 fragments
The checksum provided by the device doesn't include the L3 headers,
as IPv6 expects
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Tue, 13 Sep 2016 00:13:09 +0000 (20:13 -0400)]
net_sched: Introduce skbmod action
This action is intended to be an upgrade from a usability perspective
from pedit (as well as operational debugability).
Compare this:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action pedit munge offset -14 u8 set 0x02 \
munge offset -13 u8 set 0x15 \
munge offset -12 u8 set 0x15 \
munge offset -11 u8 set 0x15 \
munge offset -10 u16 set 0x1515 \
pipe
to:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbmod dmac 02:15:15:15:15:15
Also try to do a MAC address swap with pedit or worse
try to debug a policy with destination mac, source mac and
etherype. Then make few rules out of those and you'll get my point.
In the future common use cases on pedit can be migrated to this action
(as an example different fields in ip v4/6, transports like tcp/udp/sctp
etc). For this first cut, this allows modifying basic ethernet header.
The most important ethernet use case at the moment is when redirecting or
mirroring packets to a remote machine. The dst mac address needs a re-write
so that it doesnt get dropped or confuse an interconnecting (learning) switch
or dropped by a target machine (which looks at the dst mac). And at times
when flipping back the packet a swap of the MAC addresses is needed.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 15 Sep 2016 23:29:53 +0000 (19:29 -0400)]
Merge branch 'bpf-next'
Daniel Borkmann says:
====================
Misc cls_bpf/act_bpf improvements
Two minor improvements to {cls,act}_bpf. For details please see
individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 12 Sep 2016 21:38:43 +0000 (23:38 +0200)]
bpf: use skb_at_tc_ingress helper in tcf_bpf
We have a small skb_at_tc_ingress() helper for testing for ingress, so
make use of it. cls_bpf already uses it and so should act_bpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 12 Sep 2016 21:38:42 +0000 (23:38 +0200)]
bpf: drop unnecessary test in cls_bpf_classify and tcf_bpf
The skb_mac_header_was_set() test in cls_bpf's and act_bpf's fast-path is
actually unnecessary and can be removed altogether. This was added by
commit
a166151cbe33 ("bpf: fix bpf helpers to use skb->mac_header relative
offsets"), which was later on improved by
3431205e0397 ("bpf: make programs
see skb->data == L2 for ingress and egress"). We're always guaranteed to
have valid mac header at the time we invoke cls_bpf_classify() or tcf_bpf().
Reason is that since
6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
we do skb_reset_mac_header() in __dev_queue_xmit() before we could call
into sch_handle_egress() or any subsequent enqueue. sch_handle_ingress()
always sees a valid mac header as well (things like skb_reset_mac_len()
would badly fail otherwise). Thus, drop the unnecessary test in classifier
and action case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hadar Hen Zion [Mon, 12 Sep 2016 12:19:21 +0000 (15:19 +0300)]
net/sched: act_tunnel_key: Remove rcu_read_lock protection
Remove rcu_read_lock protection from tunnel_key_dump and use
rtnl_dereference, dump operation is protected by rtnl lock.
Also, remove rcu_read_lock from tunnel_key_release and use
rcu_dereference_protected.
Both operations are running exclusively and a writer couldn't modify
t->params while those functions are executed.
Fixes:
54d94fd89d90 ('net/sched: Introduce act_tunnel_key')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 12 Sep 2016 12:04:57 +0000 (13:04 +0100)]
test_bpf: fix the dummy skb after dissector changes
Commit
d5709f7ab776 ("flow_dissector: For stripped vlan, get vlan
info from skb->vlan_tci") made flow dissector look at vlan_proto
when vlan is present. Since test_bpf sets skb->vlan_tci to ~0
(including VLAN_TAG_PRESENT) we have to populate skb->vlan_proto.
Fixes false negative on test #24:
test_bpf: #24 LD_PAYLOAD_OFF jited:0 175 ret 0 != 42 FAIL (1 times)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 12 Sep 2016 12:01:50 +0000 (13:01 +0100)]
atm: iphase: fix newline escape and minor tweak to source formatting
The newline escape is incorrect and needs fixing. Also adjust source
formatting / indentation and add { } to trailing else.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Tue, 13 Sep 2016 07:49:05 +0000 (08:49 +0100)]
rxrpc: Add IPv6 support
Add IPv6 support to AF_RXRPC. With this, AF_RXRPC sockets can be created:
service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET6);
instead of:
service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET);
The AFS filesystem doesn't support IPv6 at the moment, though, since that
requires upgrades to some of the RPC calls.
Note that a good portion of this patch is replacing "%pI4:%u" in print
statements with "%pISpc" which is able to handle both protocols and print
the port.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 07:49:05 +0000 (08:49 +0100)]
rxrpc: Use rxrpc_extract_addr_from_skb() rather than doing this manually
There are two places that want to transmit a packet in response to one just
received and manually pick the address to reply to out of the sk_buff.
Make them use rxrpc_extract_addr_from_skb() instead so that IPv6 is handled
automatically.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 07:49:05 +0000 (08:49 +0100)]
rxrpc: Don't specify protocol to when creating transport socket
Pass 0 as the protocol argument when creating the transport socket rather
than IPPROTO_UDP.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 07:49:05 +0000 (08:49 +0100)]
rxrpc: Create an address for sendmsg() to bind unbound socket with
Create an address for sendmsg() to bind unbound socket with rather than
using a completely blank address otherwise the transport socket creation
will fail because it will try to use address family 0.
We use the address family specified in the protocol argument when the
AF_RXRPC socket was created and SOCK_DGRAM as the default. For anything
else, bind() must be used.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 21:36:22 +0000 (22:36 +0100)]
rxrpc: Correctly initialise, limit and transmit call->rx_winsize
call->rx_winsize should be initialised to the sysctl setting and the sysctl
setting should be limited to the maximum we want to permit. Further, we
need to place this in the ACK info instead of the sysctl setting.
Furthermore, discard the idea of accepting the subpackets of a jumbo packet
that lie beyond the receive window when the first packet of the jumbo is
within the window. Just discard the excess subpackets instead. This
allows the receive window to be opened up right to the buffer size less one
for the dead slot.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 08:05:14 +0000 (09:05 +0100)]
rxrpc: Fix prealloc refcounting
The preallocated call buffer holds a ref on the calls within that buffer.
The ref was being released in the wrong place - it worked okay for incoming
calls to the AFS cache manager service, but doesn't work right for incoming
calls to a userspace service.
Instead of releasing an extra ref service calls in rxrpc_release_call(),
the ref needs to be released during the acceptance/rejectance process. To
this end:
(1) The prealloc ref is now normally released during
rxrpc_new_incoming_call().
(2) For preallocated kernel API calls, the kernel API's ref needs to be
released when the call is discarded on socket close.
(3) We shouldn't take a second ref in rxrpc_accept_call().
(4) rxrpc_recvmsg_new_call() needs to get a ref of its own when it adds
the call to the to_be_accepted socket queue.
In doing (4) above, we would prefer not to put the call's refcount down to
0 as that entails doing cleanup in softirq context, but it's unlikely as
there are several refs held elsewhere, at least one of which must be put by
someone in process context calling rxrpc_release_call(). However, it's not
a problem if we do have to do that.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 08:12:34 +0000 (09:12 +0100)]
rxrpc: Adjust the call ref tracepoint to show kernel API refs
Adjust the call ref tracepoint to show references held on a call by the
kernel API separately as much as possible and add an additional trace to at
the allocation point from the preallocation buffer for an incoming call.
Note that this doesn't show the allocation of a client call for the kernel
separately at the moment.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 09:23:01 +0000 (10:23 +0100)]
rxrpc: Allow tx_winsize to grow in response to an ACK
Allow tx_winsize to grow when the ACK info packet shows a larger receive
window at the other end rather than only permitting it to shrink.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 21:36:22 +0000 (22:36 +0100)]
rxrpc: Use skb->len not skb->data_len
skb->len should be used rather than skb->data_len when referring to the
amount of data in a packet. This will only cause a malfunction in the
following cases:
(1) We receive a jumbo packet (validation and splitting both are wrong).
(2) We see if there's extra ACK info in an ACK packet (we think it's not
there and just ignore it).
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 21:36:22 +0000 (22:36 +0100)]
rxrpc: Add missing unlock in rxrpc_call_accept()
Add a missing unlock in rxrpc_call_accept() in the path taken if there's no
call to wake up.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 21:36:21 +0000 (22:36 +0100)]
rxrpc: Requeue call for recvmsg if more data
rxrpc_recvmsg() needs to make sure that the call it has just been
processing gets requeued for further attention if the buffer has been
filled and there's more data to be consumed. The softirq producer only
queues the call and wakes the socket if it fills the first slot in the
window, so userspace might end up sleeping forever otherwise, despite there
being data available.
This is not a problem provided the userspace buffer is big enough or it
empties the buffer completely before more data comes in.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 21:36:21 +0000 (22:36 +0100)]
rxrpc: The IDLE ACK packet should use rxrpc_idle_ack_delay
The IDLE ACK packet should use the rxrpc_idle_ack_delay setting when the
timer is set for it.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 21:36:21 +0000 (22:36 +0100)]
rxrpc: Add missing wakeup on Tx window rotation
We need to wake up the sender when Tx window rotation due to an incoming
ACK makes space in the buffer otherwise the sender is liable to just hang
endlessly.
This problem isn't noticeable if the Tx phase transfers no more than will
fit in a single window or the Tx window rotates fast enough that it doesn't
get full.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Tue, 13 Sep 2016 21:36:21 +0000 (22:36 +0100)]
rxrpc: Make sure we initialise the peer hash key
Peer records created for incoming connections weren't getting their hash
key set. This meant that incoming calls wouldn't see more than one DATA
packet - which is not a problem for AFS CM calls with small request data
blobs.
Signed-off-by: David Howells <dhowells@redhat.com>
David S. Miller [Tue, 13 Sep 2016 16:16:44 +0000 (12:16 -0400)]
Merge branch 'mlxsw-ethtool'
Jiri Pirko says:
====================
mlxsw: ethtool enhancements
Ido says:
Patches 1-4 do some minor cleanup in current ethtool ops. Patch 5
replace legacy {get,set}_settings callbacks with
{get,set}_link_ksettings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 12 Sep 2016 11:26:27 +0000 (13:26 +0200)]
mlxsw: spectrum: Add support for new ethtool API
Remove the deprecated {get,set}_settings callbacks and instead add
{get,set}_link_ksettings along with support for newly available speeds.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 12 Sep 2016 11:26:26 +0000 (13:26 +0200)]
mlxsw: spectrum: Indicate support of multiple port types
The device can support multiple port types, so don't return on first
match.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 12 Sep 2016 11:26:25 +0000 (13:26 +0200)]
mlxsw: spectrum: Report port type according to operational speed
In case port isn't operational we shouldn't report the port type, but
instead return PORT_OTHER. This is consistent with most other drivers
that return PORT_OTHER when media type can't be determined.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 12 Sep 2016 11:26:24 +0000 (13:26 +0200)]
mlxsw: spectrum: Report link partner's advertised speeds
If autonegotiation was performed successfully, then we should report the
link partner's advertised speeds instead of the operational speed of the
port.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 12 Sep 2016 11:26:23 +0000 (13:26 +0200)]
mlxsw: spectrum: Correctly report autonegotiation
Up until now the device always reported autonegotiation to be off
although it was on by default.
Allow the user to disable / enable autonegotiation and report its status
correctly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philippe Reynes [Sun, 11 Sep 2016 15:54:04 +0000 (17:54 +0200)]
net: ethernet: apm: xgene: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philippe Reynes [Sun, 11 Sep 2016 15:54:03 +0000 (17:54 +0200)]
net: ethernet: apm: xgene: use phydev from struct net_device
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy_dev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Sat, 10 Sep 2016 12:31:30 +0000 (12:31 +0000)]
net: ethernet: dwmac: fix non static symbol warning
Fixes the following sparse warning:
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c:172:1: warning:
symbol 'stm32_dwmac_pm_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Sat, 10 Sep 2016 11:17:57 +0000 (11:17 +0000)]
net: macb: fix missing unlock on error in macb_start_xmit()
Fix missing unlock before return from function macb_start_xmit()
in the error handling case.
Fixes:
007e4ba3ee13 ("net: macb: initialize checksum when using
checksum offloading")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Ellerman [Sat, 10 Sep 2016 09:59:05 +0000 (19:59 +1000)]
net: Remove NO_IRQ from powerpc-only network drivers
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
from powerpc-only drivers.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Sat, 10 Sep 2016 00:56:55 +0000 (00:56 +0000)]
tipc: fix possible memory leak in tipc_udp_enable()
'ub' is malloced in tipc_udp_enable() and should be freed before
leaving from the error handling cases, otherwise it will cause
memory leak.
Fixes:
ba5aa84a2d22 ("tipc: split UDP nl address parsing")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 8 Sep 2016 16:50:43 +0000 (12:50 -0400)]
net: bridge: add helper to call /sbin/bridge-stp
If /sbin/bridge-stp is available on the system, bridge tries to execute
it instead of the kernel implementation when starting/stopping STP.
If anything goes wrong with /sbin/bridge-stp, bridge silently falls back
to kernel STP, making hard to debug userspace STP.
This patch adds a br_stp_call_user helper to start/stop userspace STP
and debug errors from the program: abnormal exit status is stored in the
lower byte and normal exit status is stored in higher byte.
Below is a simple example on a kernel with dynamic debug enabled:
# ln -s /bin/false /sbin/bridge-stp
# brctl stp br0 on
br0: failed to start userspace STP (256)
# dmesg
br0: /sbin/bridge-stp exited with code 1
br0: failed to start userspace STP (256)
br0: using kernel STP
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Javier Martinez Canillas [Mon, 12 Sep 2016 14:03:46 +0000 (10:03 -0400)]
iwlegacy: use IS_ENABLED() instead of checking for built-in or module
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Javier Martinez Canillas [Mon, 12 Sep 2016 14:03:45 +0000 (10:03 -0400)]
hamradio: use IS_ENABLED() instead of checking for built-in or module
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Javier Martinez Canillas [Mon, 12 Sep 2016 14:03:44 +0000 (10:03 -0400)]
stmmac: use IS_ENABLED() instead of checking for built-in or module
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Javier Martinez Canillas [Mon, 12 Sep 2016 14:03:43 +0000 (10:03 -0400)]
sis900: use IS_ENABLED() instead of checking for built-in or module
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Daniele Venzano <venza@brownhat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Javier Martinez Canillas [Mon, 12 Sep 2016 14:03:42 +0000 (10:03 -0400)]
sfc: use IS_ENABLED() instead of checking for built-in or module
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>