OSDN Git Service
Treehugger Robot [Fri, 29 Jun 2018 18:55:56 +0000 (18:55 +0000)]
Merge "Fix double close in btif.cc's dump."
Benson Li [Mon, 25 Jun 2018 06:11:20 +0000 (14:11 +0800)]
AVRCP: Reject SetAddressedPlayer command only if remote set invalid player ID
Implement HandleSetAddressedPlayer() to check if remote set valid
player ID and properly respond to remote.
Bug:
110632860
Test: PTS Test AVRCP/TG/MPS/BI-01-C AVRCP/TG/MPS/BV-02-C
Change-Id: Ice13e7ea97cdac369c4d021171a24bf9d96c9da8
Treehugger Robot [Thu, 28 Jun 2018 00:31:05 +0000 (00:31 +0000)]
Merge "Move sepolicy files to system/sepolicy"
Myles Watson [Tue, 26 Jun 2018 00:09:27 +0000 (17:09 -0700)]
Move sepolicy files to system/sepolicy
Test: Toggle Bluetooth, ls -alZ /vendor/bin/hw/*blue*
Change-Id: Ibf72f8bacc2f4975d06f4892e3b33ef6fb08aab7
Merged-In: Ibf72f8bacc2f4975d06f4892e3b33ef6fb08aab7
Josh Gao [Tue, 26 Jun 2018 21:01:06 +0000 (14:01 -0700)]
Fix double close in btif.cc's dump.
dump closes a file descriptor that is still owned by a
ParcelFileDescriptor which leads eventually to a double close.
Test: treehugger
Change-Id: Id351b5429cb17b48e37313850a363d739d78c4a1
Pavlin Radoslavov [Thu, 21 Jun 2018 01:28:33 +0000 (18:28 -0700)]
If command_timed_out() is triggered don't get blocked by a deadlock
If command_timed_out() is triggered and we cannot acquire the
commands_pending_response_mutex to print the debug info, then proceed
with the rest of the operations until the process aborts.
Similarly, if startup_timer_expired() is triggered and we are blocked
by a deadlock, just abort() because there is no way to recover.
Bug:
110441099
Test: Code compilation
Change-Id: I367332bbbd9c1d887bd2bc829b9f617114fc96fc
Jakub Pawlowski [Thu, 21 Jun 2018 12:23:47 +0000 (14:23 +0200)]
Move crypto related functions into crypto_toolbox
Also clean up the code:
* remove spurious logging, or replace with DVLOG
* use std::copy and std::reverse_copy instead of ARRAY_TO_STREAM and
REVERSE_ARRAY_TO_STREAM
Test: CryptoToolboxTest already cover all those functions
Change-Id: I3221d0966d2dd6ca229adf441ceb75dd37a54d7c
Merged-In: I3221d0966d2dd6ca229adf441ceb75dd37a54d7c
Treehugger Robot [Tue, 26 Jun 2018 03:02:47 +0000 (03:02 +0000)]
Merge "Reset a2dp_cmd_pending as appropriate for A2DP HW offload HAL commands"
Treehugger Robot [Tue, 26 Jun 2018 02:50:44 +0000 (02:50 +0000)]
Merge "Add missing btif_a2dp_audio_interface_end_session() call during disconnect"
Treehugger Robot [Tue, 26 Jun 2018 02:07:46 +0000 (02:07 +0000)]
Merge "a2dp_vendor_ldac: add missing break"
Pavlin Radoslavov [Mon, 25 Jun 2018 22:22:13 +0000 (15:22 -0700)]
Reset a2dp_cmd_pending as appropriate for A2DP HW offload HAL commands
Previously, the a2dp_cmd_pending was set to the last pending command,
but was never reset to A2DP_CTRL_CMD_NONE after the command processing
was completed.
Bug:
110712574
Test: Manual: Pair with two headsets, start/suspend/stop/switch active
device
Change-Id: I464e6e9d41a221df44eba21e538b499a9ac1dcfb
Pavlin Radoslavov [Mon, 25 Jun 2018 23:34:17 +0000 (16:34 -0700)]
Add missing btif_a2dp_audio_interface_end_session() call during disconnect
Update the logic inside btif_a2dp_source_end_session_delayed() to make
sure that btif_a2dp_audio_interface_end_session() is called when device
is disconnected.
Also, update existing log messages to make it easier to identify similar
issues in the future.
Bug:
110176990
Test: Manual: Pair with two headsets, start/suspend/stop/switch active
device
Change-Id: I248e5c3e2c4cf0ad820cef34ba859e9adc8dec8e
Tom Yan [Wed, 20 Jun 2018 04:10:45 +0000 (12:10 +0800)]
a2dp_vendor_ldac: add missing break
Bug:
110800823
Test: Code compilation
Change-Id: I9b40f63d176031087cb2ab2f2b5400b4d326cf8f
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Jakub Pawlowski [Thu, 21 Jun 2018 07:03:45 +0000 (09:03 +0200)]
Linux build fix
Add empty android_errorWriteLog implementation for Linux
Add missing license headers
Fix BUILD.gn files
Test: compile using ninja
Change-Id: I9be297d5847b4c0856786738eac2c30424593919
Treehugger Robot [Fri, 22 Jun 2018 05:26:17 +0000 (05:26 +0000)]
Merge "HFP: Don't use mSBC for HF devices not supporting Codec Negotiation"
Jakub Pawlowski [Tue, 19 Jun 2018 21:48:07 +0000 (14:48 -0700)]
Move crypto toolbox functions into separate file
Test: already covered by CryptoToolboxTest
Change-Id: I9ba12616d51744fe46648a00a73065cf66f54297
Jakub Pawlowski [Mon, 18 Jun 2018 20:33:26 +0000 (13:33 -0700)]
Add more crypto toolbox tests, plus minor fix in smp_keys.cc
This code extracts two new functions, smp_calculate_ltk_to_link_key
and smp_calculate_link_key_to_ltk, in order to test them.
Also use modulo operator to compute modulo in smp_calculate_g2.
Plus remove unused function definitions in smp_int.h, that were probably
previously used for testing.
Test: added and updated CryptoToolboxTest
Change-Id: Ia84f72af666fc8e34f887b65b07208bc786bf2e0
weichinweng [Thu, 21 Jun 2018 06:28:25 +0000 (14:28 +0800)]
HFP: Don't use mSBC for HF devices not supporting Codec Negotiation
* Some misbehaving HF devices (e.g. Sony XAV AX100 carkit, Sony MW600)
indicate their support on WBS but not support on Codec Negotiation.
In this condition, if Fluoride chooses mSBC will result in big noise or SCO
no sound.
* This CL adds a workaround for checking if HF device indicate codec negotiation is
not supported, Fluoride will assume CVSD codec by default.
Bug:
101592600
Test: make, connect SCO and check voice on carkit and headset.
Change-Id: If0d8779bcfd55b87852f56f0448fd1b585ee45ad
Jakub Pawlowski [Wed, 20 Jun 2018 21:09:21 +0000 (14:09 -0700)]
Remove unused MIP events, calbacks and structs
Test: compilation
Change-Id: I00e0fcfdea129f0f7eee16d69c5fc09451ad6746
Pavlin Radoslavov [Wed, 20 Jun 2018 02:10:43 +0000 (19:10 -0700)]
Gracefully handle A2DP hardware offload Audio HAL service death
Register for Audio HAL service death, and restart the Audio HAL session
if necessary.
Bug:
77926419
Test: Manual: stream Bluetooth audio and kill -9 the audioserver
Change-Id: I45e83aea0fb95301e6ceadee74661dd55f8c0f66
Jakub Pawlowski [Fri, 15 Jun 2018 00:40:34 +0000 (17:40 -0700)]
Replace BT_OCTET16 with Octet16
BT_OCTET16 was a uint8_t[16], that is a pointer.
This means that it was not copyable, and one had to be always aware of
what this type really means when passing it to function.
Octet16 is std::array<uint8_t, 16> and is copyable. It can also be
copied using "=" operator, instead of memcpy, or ARRAY_TO_STREAM.
Octet16 can also be returned from function by value. Thanks to it, some
smp functions can be simplified, by returning value instead of accepting
pointer to output.
Test: net_stack_smp_test
Change-Id: I0687a948e5807f76ec3d1b5d1d4d2ad2b50b87dd
Jakub Pawlowski [Mon, 18 Jun 2018 20:29:24 +0000 (13:29 -0700)]
Fix SMP_Encrypt for data shorter than 16 bytes
This bug was introduced in commit
c3e7c878fe8495590f059547153bd77cdea322a6
osi_calloc was replaced with raw array, that is not wiped clean.
Change-Id: I57a4e7a26108ad4672d2dd2ff25028653c96ca1b
Treehugger Robot [Mon, 18 Jun 2018 19:24:25 +0000 (19:24 +0000)]
Merge "SMP_Encrypt - convert p_out into raw array"
Greg Kaiser [Fri, 15 Jun 2018 21:30:50 +0000 (14:30 -0700)]
gatt: Avoid using erased iterator
After we've called erase() on an iterator, we can't safely use
it anymore. We avoid this, to assure consistent behavior from
this code.
Test: None
Change-Id: I4c9aecadc768d57f942669b7e68ee3a302e67e9c
Jakub Pawlowski [Thu, 14 Jun 2018 23:46:29 +0000 (16:46 -0700)]
SMP_Encrypt - convert p_out into raw array
SMP_Encrypt output is really 128bit value. No need for status or any
other additional fields.
Test: net_test_stack_smp.AesCmacTest covers that
Change-Id: Iabfaa85d6f4bd5715e0bdab9d3eaf22bb5c39239
Joseph Pirozzo [Fri, 15 Jun 2018 18:54:57 +0000 (18:54 +0000)]
Merge "Add support for AVRCP addressed player changed."
Treehugger Robot [Fri, 15 Jun 2018 17:40:32 +0000 (17:40 +0000)]
Merge "A2DP Offload: Log audio duration and codec metrics"
cheneyni [Mon, 11 Jun 2018 13:19:26 +0000 (21:19 +0800)]
Clear local suspending flag when the BTA_AV_STOP_EVT event received
The Stack would set the pending flag when received the Stop request but
did not clear it even state became Opened. This would cuase Stack
replied Suspended immediately to Audio HAL but kept peer at Started
state and failed to handle Start request again.
This change clears the local suspending flag when BTA_AV_STOP_EVT
received and also reset all pending status when becomes Opened so it
will take effect only when Stack is changing state from Started.
Bug:
110022304
Test: Manual: (1) Play A2DP music and switch codec
(2) Play A2DP music and change active device
Change-Id: I4b9aca33eb7eb6c40038e2082d23eb22e5830714
Treehugger Robot [Fri, 15 Jun 2018 06:22:30 +0000 (06:22 +0000)]
Merge "Fix the reconnect issue in hfp client"
Jack He [Fri, 15 Jun 2018 01:04:12 +0000 (18:04 -0700)]
A2DP Offload: Log audio duration and codec metrics
* Add A2dpOffloadAudioStats class to store metrics for A2DP offload
* Add logging statements to log A2DP start/suspend/stop events when A2DP
offload is enabled
* Separate software encoding logging from hardware encoding logging
Bug:
109953464
Test: make, run A2DP in offload mode and dump metrics
Change-Id: I1a19c64c6b1ee530e5927dd3d13e31b00729850b
Treehugger Robot [Fri, 15 Jun 2018 01:39:43 +0000 (01:39 +0000)]
Merge "Correctly initialize A2DP Sink codecs if A2DP Source HW offload is enabled"
Stanley Tng [Sat, 9 Jun 2018 00:09:00 +0000 (17:09 -0700)]
Hearing Aid: codec and connection interval switching
Added support to switch the LE Connection Interval between 10 msec and
20 msec. Uses the "persist.bluetooth.hearingaid.interval" to configure.
Test: Manually use hearing aid devices and switches between 10 msec and
20 msec connection interval
Bug:
79579786
Change-Id: Iec15a0c9f76afe265368fd90662ffe60a29fb27b
Pavlin Radoslavov [Thu, 14 Jun 2018 23:27:54 +0000 (16:27 -0700)]
Correctly initialize A2DP Sink codecs if A2DP Source HW offload is enabled
This also fixes unit test failures if A2DP Source HW offload is enabled.
Bug:
110228602
Test: Failing unit tests now succeed
Change-Id: I36678738bfcfcce0f2e8a055f10c86cc6b3e682a
Treehugger Robot [Thu, 14 Jun 2018 23:10:13 +0000 (23:10 +0000)]
Merge "Multi-A2DP: Fix timing and codec measurement in metrics"
Jack He [Sat, 9 Jun 2018 03:13:23 +0000 (20:13 -0700)]
Multi-A2DP: Fix timing and codec measurement in metrics
* Copy BtifMediaStats and SchedulingStats when updating metrics
to avoid race conditions
* Do not log audio_duration_ms if session_end_us <= session_start_us
* Clear cached A2DP metrics when LogBluetoothSessionEnd() is called
* Log codec information along-side A2DP metrics
* Log whether A2DP offload is enabled along-side A2DP metrics
Multi-A2DP:
* Log LogBluetoothSessionStart at btif_a2dp_source_start_session_delayed
* Log LogBluetoothSessionEnd at btif_a2dp_source_end_session_delayed
Unit Test:
* Wrote A2DPSessionTwoUpdatesSeparatedbyEndTest that will fail if A2DP
metrics are not cleared when LogBluetoothSessionEnd is called
Bug:
109953464
Test: make, net_test_osi::BluetoothMetricsLoggerTest,
net_test_osi::BluetoothA2DPSessionMetricsTest
Change-Id: I6a311dce8035ce2e3f39773c260ea9eaef73e45b
Jakub Pawlowski [Thu, 14 Jun 2018 16:03:47 +0000 (09:03 -0700)]
SMP_Encrypt refactor
* key must be 16bit, so no need to pass it's length, and check it's
value
* p_out being null is a bad call that should crash to be catched, not an
error we should handle
* hash computation always succeed, don't return any errors
Test: existing unit tests cover it, i.e. AesCmacTest
Change-Id: Ifba8902f3f1a7be3c54dd7a33d9ff1e52ffd237b
Jakub Pawlowski [Thu, 14 Jun 2018 07:20:13 +0000 (00:20 -0700)]
Add tests for AES_CMAC
Test: added AesCmacTest
Change-Id: I66615e581ee64debc2c25ae03e18decd2f8c8fa8
Jakub Pawlowski [Fri, 8 Jun 2018 16:32:57 +0000 (09:32 -0700)]
GATTC_Discover: pass parameters directly instead of through pointer
Bug:
67057055
Test: manual
Change-Id: I7be853241595b336e2d4b67bc57170ee01ce6e72
Jakub Pawlowski [Wed, 18 Apr 2018 14:31:30 +0000 (07:31 -0700)]
GATT database refactor
Move logic and data responsible for GATT Discovery into separate class.
Create clean representation of GATT database, and attributes for
storage.
Minor service discovery improvements:
* don't send requests to explore services with start handle equal to end handle.
* don't try to discover characteristic if only one handle is left at end
of service - it uses two handles, one for definition, one for value
* if secondary service is defined before service that includes it, it
should now be properly discovered.
Test: Added DatabaseBuilderTest, manual tests with LE HID devices, Daydream
Controller and Clips camera.
Bug:
67057055
Change-Id: I511f4ee7c56c8fa65f012de0b6d1291321840d11
Jacky Cheung [Thu, 29 Jun 2017 22:27:35 +0000 (15:27 -0700)]
Add storage API to get number of bonded devices
Test: manual
Change-Id: Iaded8031bf706d84cff68f78dff8feb887a159a4
Jinguang Dong [Tue, 12 Jun 2018 11:56:24 +0000 (19:56 +0800)]
Fix the reconnect issue in hfp client
The HFP client would not reconnect any more on collision scenario
as upper layer calls the connect API per 30s. which related with
CL of
5eccd90936d606e0070872b247fd3462e9c9c19b
Bug:
74518379
Test: Manual test for multiple incoming/outgoing HF connections
between Android Wear and Handset
Signed-off-by: Kai Huang <huangkai1@huawei.com>
Change-Id: I445f3633165d8ec12f91bc5fe5a8217505318cff
Treehugger Robot [Mon, 11 Jun 2018 20:06:20 +0000 (20:06 +0000)]
Merge "Hearing Aid - codec switching"
Jakub Pawlowski [Tue, 10 Apr 2018 07:16:53 +0000 (00:16 -0700)]
Hearing Aid - codec switching
StartSendingAudio internally sets the codec to the HearingAidAudioSource.
OnDeviceAvailable callback triggers audio framework to grab codec
configuration from HearingAidAudioSource. Those calls must be made in proper
order, otherwise audio framework will grab bad codec configuration.
This patch also remove default codec configuration, and crash if codec
configuration is not done correctly.
Test: use hearing aid supporting 24kHz codec
Change-Id: I9419d58fa8728fc8e0f0c2d2ed8d8d741309a9a3
Treehugger Robot [Mon, 11 Jun 2018 07:42:18 +0000 (07:42 +0000)]
Merge "Add documentation for enabling PTS mode"
Treehugger Robot [Mon, 11 Jun 2018 07:27:41 +0000 (07:27 +0000)]
Merge "Use ParcelFileDescriptor implementation in libbinder"
Treehugger Robot [Fri, 8 Jun 2018 05:39:40 +0000 (05:39 +0000)]
Merge "Send ACK for A2DP_CTRL_CMD_SUSPEND even if audio was no streaming"
Ajay Panicker [Thu, 31 May 2018 00:50:39 +0000 (17:50 -0700)]
Run the AVRCP Service interface functions on the BTA thread
Bug:
80416347
Test: Turn off Bluetooth while connected to a device we initiated the
connection to.
Change-Id: I8f10409c495213ef3117aedf66919de7c0b3d164
(cherry picked from commit
95e1a9e65f2d61523753f19d8855144672413506)
Ajay Panicker [Thu, 24 May 2018 18:26:15 +0000 (11:26 -0700)]
AVRCP: Narrow the scope of the lock in Init and Cleanup
Bug:
80227904
Test: Disable Bluetooth while connected to a device
Change-Id: I6c77e38ebaa84e4a075ef4636d6b519d4ccfb8c5
(cherry picked from commit
4369f6f7607c17ef0ab77bb52d23f20dbc54e424)
Ajay Panicker [Tue, 22 May 2018 21:42:16 +0000 (14:42 -0700)]
AVRCP: Cancel all pending messages and prevent future messages after cleanup
Bug:
79859133
Test: Regression test and repeatedly turn Bluetooth off and on
Change-Id: I1aa05cc5430dbda1d4bae6aa9543f655baed77b4
(cherry picked from commit
85624a8015128ec0bb846e539030d11b85952323)
Pavlin Radoslavov [Tue, 5 Jun 2018 05:18:32 +0000 (22:18 -0700)]
Send ACK for A2DP_CTRL_CMD_SUSPEND even if audio was no streaming
The A2DP_CTRL_CMD_SUSPEND command from the Audio HAL could be received
even if audio wasn't streaming before. Therefore, we should always
respond with an ACK once the command processing has been completed.
Bug:
109712592
Test: Manual: (1) Play music to Headset; (2) Select "This device" as output;
(3) Stop playing music; (4) Select Headset as output
Change-Id: I0f5d52d14b50882931b9d19de1a2f25204fce19e
Merged-In: I0f5d52d14b50882931b9d19de1a2f25204fce19e
(cherry picked from commit
3008cfbeb15605adb0c925d394d9e9934f74d6f6)
Jakub Pawlowski [Sat, 2 Jun 2018 06:34:40 +0000 (06:34 +0000)]
Revert "Don't start the authentication when peer device already started it"
This reverts commit
e75bd3aa3588a5616dfad6fe9f253cb58e65e3ed.
Reason for revert: It breaks pairing of Classic HID devices with Phones
Change-Id: I5dd703934c56387d279d350a36c135245a669b29
Test: Pair with Bluetooth Classic HID keyboard
Bug:
79941483
Stanley Tng [Mon, 4 Jun 2018 17:34:45 +0000 (10:34 -0700)]
Do completion callback during failed security authenication
This CL fixes a regression caused by the earlier commit SHA
6269f02 where the
completion callback for this failed security authenication attempt is
rejected incorrectly. The corner case is when the authenication failed
but the bonding address matches the current address.
Test: Run SL4A "BleCocTest:test_coc_secured_connection_throughput"
Change-Id: I68b75b0e96d2762dcd2862787d51aeb90d7b90a0
Hansong Zhang [Wed, 30 May 2018 23:08:28 +0000 (16:08 -0700)]
Add documentation for enabling PTS mode
Test: not needed
Change-Id: I8a65e3a4bac4de72ec20c73e6b553f2565c9e1de
Jakub Pawlowski [Thu, 24 May 2018 21:14:18 +0000 (21:14 +0000)]
Revert "GATT: Fix GATT error response for execute write"
This reverts commit
b8a5b213a63def7c0a0d09d322603ae5a9abd435.
Reason for revert: This patch does not make Fluoride comply with BT Spec,
it just make a false assumption to pass a test case.
Change-Id: I023b7673c52522e7c1a318f5b9596ebb4fbc99ec
Joseph Pirozzo [Thu, 31 May 2018 17:26:08 +0000 (10:26 -0700)]
Add support for AVRCP addressed player changed.
When the addressed player notification comes in decode it and provide
the status up to the java layer correctly.
Bug:
72495707
Test: change media player on paired phone and observe callback.
Change-Id: Iebaae524c06f5c4b7bc962d1f55d539910510e1f
Hansong Zhang [Wed, 30 May 2018 21:16:23 +0000 (14:16 -0700)]
AVRCP: Reject invalid PlayItem and SetAddressedPlayer command
* Use CType REJECT to reject invalid PlayItem command
* Reject SetAddressPlayer command as it is not implemented
Bug:
80481276
Bug:
80483247
Test: PTS AVRCP/TG/MCN/NP/BI-01-C
Change-Id: I837f6d2661e94e09afaa72a9c0c77d5c1ffe9e98
(cherry picked from commit
fe5d973670cc6f95d7431f5a0699a326032e8b06)
Treehugger Robot [Wed, 30 May 2018 16:42:33 +0000 (16:42 +0000)]
Merge changes from topic "avrcp-addressed-player-changed"
* changes:
Send addressed and available player change for PTS test
Add respond track not selected interim when register notification
Send UID 0 for track changed if there is no media ID
Ryo Hashimoto [Wed, 30 May 2018 07:34:19 +0000 (16:34 +0900)]
Use ParcelFileDescriptor implementation in libbinder
Bug:
80377815
Test: build
Change-Id: I0a415181827d6c4dc2243cf14b9fb120effce982
tedwang [Fri, 18 May 2018 10:16:40 +0000 (18:16 +0800)]
Send addressed and available player change for PTS test
Implement HandleAddressPlayerUpdate() and HandAvailablePlayerUpdate()
for PTS test.
Bug:
79375787 79376305
Test: PTS Test AVRCPTG/MPS/BV-05-C AVRCP/TG/MPS/BV-07-C
Change-Id: I6b976af8bdd1afcc9799c50c8e558939cf7be187
Merged-In: I6b976af8bdd1afcc9799c50c8e558939cf7be187
(cherry picked from commit
7a3f78eaa6294d5079312dc9f0e5c7d5c6b5e059)
tedwang [Wed, 16 May 2018 11:51:26 +0000 (19:51 +0800)]
Add respond track not selected interim when register notification
Respond interim with Identifier 0xFFFFFFFFFFFFFFFF register
notification for EVENT_TRACK_CHANGE for pts test
Bug:
79378129
Test: PTS AVRCP/TG/NFY/BV-04-C
Change-Id: Ia861bf4682e9daf9c7c3842df9f95381171da574
Merged-In: Ia861bf4682e9daf9c7c3842df9f95381171da574
(cherry picked from commit
a25fca2acb30aafab9cedc521888b794b703eff3)
Ajay Panicker [Tue, 8 May 2018 23:34:04 +0000 (16:34 -0700)]
Send UID 0 for track changed if there is no media ID
Some carkits need the track changed UID to change even though we
explicitly report that UID's are refreshed on any now playing list
change. UID 0 is special since it represents that the song has changed
and forces an update.
Bug:
72824896
Test: Tested with Audi carkit where Spotify wasn't updating past the
first song previously.
Change-Id: I033f9a2f96acfde25922d6912a4927b95fb89596
Merged-In: I033f9a2f96acfde25922d6912a4927b95fb89596
(cherry picked from commit
2789ae2b57085aad446d7e062f66f5d83cf26e0b)
Jakub Pawlowski [Tue, 29 May 2018 22:28:15 +0000 (15:28 -0700)]
LE Create Connection Complete - crash on Command Disallowed
When LE Create Connection Complete is received with status "Command
Disallowed", we can't tell which state we should transition to. This
can be triggered only in case of rare race condition. Crash to recover.
This was introduced in
24adb37e4106bf8544c7729d34451fdf2777c4dc, when
generic handling of all errors to this event was added.
Bug:
77429706
Test: sl4a GattConnectTest
Change-Id: I888861461da296876d97e8784a3dc7c53130fb51
Jakub Pawlowski [Wed, 30 May 2018 02:43:52 +0000 (02:43 +0000)]
Merge "Fix race condition in LE Create Connection Cancel handling"
Hansong Zhang [Tue, 17 Apr 2018 23:00:30 +0000 (16:00 -0700)]
Bluetooth HFP: Use WBS by default (1/5)
Bug:
72624793
Test: compilation
Change-Id: Ia64c49210769581bba5be7354b67fa50d89cfdaa
Pavlin Radoslavov [Mon, 28 May 2018 03:06:20 +0000 (20:06 -0700)]
Explicitly stop streaming when switching streaming to another device
* Explicitly call btif_av_stream_stop() inside
btif_a2dp_source_end_session_delayed() when ending the session.
It should be called regardless whether we are using software
or hardware based encoding.
* Removed extra btif_av_stream_stop() call inside
BtifAvSource::SetActivePeer(), because it is not needed anymore.
It is replaced by the call inside btif_a2dp_source_end_session_delayed()
* Added "peer_address" argument to btif_av_stream_stop()
so it can be used to stop the stream to a specific peer.
* Fix an issue inside bta_av_chk_2nd_start() that was triggering
extra start request to some headsets - the extra start request
was blocking follow-up legitimate requests.
* Simplify the logic inside bta_av_do_start() so it is easier to
identify issues when start streaming. The actual processing logic
itself is not changed.
* Add extra log messages or update existing ones to help debug
similar issues in the future.
Bug:
79909084
Test: Manual: streaming A2DP, connect a new device, change active device
Change-Id: Id583aa44aec7082dc5f94532e6b41a7ea33813a1
Merged-In: Id583aa44aec7082dc5f94532e6b41a7ea33813a1
(cherry picked from commit
7b97d4d4a45d25a4ac80f3b59a40c115f0a03af4)
Jakub Pawlowski [Tue, 29 May 2018 19:52:17 +0000 (12:52 -0700)]
Fix race condition in LE Create Connection Cancel handling
Message with description of the issue being fixed:
https://android-review.googlesource.com/c/platform/system/bt/+/646600#message-
4781dd6e3e74d8b11ef716bbf58edbc64645f18c
Bug:
77429706
Change-Id: I1c076c7f033fc3d1aaf47887ce691b6325721d85
Jakub Pawlowski [Sat, 26 May 2018 04:07:38 +0000 (21:07 -0700)]
Linux build and linking fix
Test: run bluetoothtbd on Linux
Change-Id: Id9d913f8766b71c77696df25f74a8e33ba57523e
Jakub Pawlowski [Tue, 29 May 2018 15:03:54 +0000 (15:03 +0000)]
Merge "Don't refresh GATT database after bonding"
Sunny Kapdi [Fri, 25 May 2018 16:29:16 +0000 (09:29 -0700)]
A2DP Offload: Avoid Offload_start/stop from remote
When DUT is A2DP Source, and remote initiates start
we suspend it immediately. There is no need to do
Offload_start/stop in this case. Also, the offload
start/stop was coming out of sync here.
Bug:
80284000
Test: Manual
Change-Id: If54c28188e7432ebcba639cd2fbfe81536c2f2e6
Joseph Pirozzo [Fri, 25 May 2018 19:31:06 +0000 (12:31 -0700)]
Inform AVRCP Controller before cleaning up.
Move the JNI callback earlier in the procedure before the device info is
zeroed out such that the higher levels know which device disconnected.
Bug:
80265765
Test: Disconnect AVRCP and verify bluetooth_manager reports it is
disconnected.
Change-Id: I1c69341227f4c1c1662022a4a77e1752f6306d2e
Jack He [Thu, 24 May 2018 22:53:27 +0000 (15:53 -0700)]
HFP: Only advance BTIF queue for outgoing connections
* Modify HFP btif layer to only advance queue when there is a
connection outcome for outgoing connections
* During an ACL collision, incoming connection may preempt outgoing
connection and come back to the upper layer in a separate control
block. In this case, we should not advance the btif queue until the
outgoing connection sends callback to the btif layer
* When RFCOMM connection is successful, but SLC connection failed, we
should also send callback to Java layer and advance the queue. We
should only do this when transition from RFCOMM connected to
Disconnected, not from SLC connected to Disconnected
* We should only advance the queue after sending connection state update
to Java layer
* This prevents the crash in connect_int() where we check for any
control block that is left in connecting state
Bug:
80251999
Test: connect HFP devices rapidly to trigger ACL collision
testplans/details/166812/3975
Change-Id: Iba3736c77d8ef4a4701896461042466c26bc4820
Jack He [Fri, 25 May 2018 01:59:13 +0000 (18:59 -0700)]
HFP: Fix ACL collision handling and WBS update
* Correctly set control block handle when passing WBS event data to
upstream
* Correctly reject local outgoing connection when a colliding incoming
connection is connected to RFCOMM
* Add more logging to help with future debugging
Bug:
80251999
Test: connect HFP devices rapidly and toggle Bluetooth rapidly
testplans/details/166812/3975
Change-Id: I90616d70335ca68c40251fb722146924c4801cbe
Jakub Pawlowski [Wed, 16 May 2018 21:46:40 +0000 (14:46 -0700)]
Don't refresh GATT database after bonding
According to the Bluetooth spec: "For a given client, the server shall have
one set of attributes.".
If we discover services before bonding, we should be fine using them
afterwards, without need to refresh whole GATT database.
This change should speed up bonding HOGP devces by around one second.
Refreshment of GATT database was tied to connection parameter
reenabling. Make sure bonding does not disable connection parameter
change.
Bug:
67057055
Test: Bond with HOGP device, verify profile is connected properly
Change-Id: I1e738c56e211cf3d9234b424f354bf3e468227aa
Treehugger Robot [Fri, 25 May 2018 21:09:38 +0000 (21:09 +0000)]
Merge "Linux build fix"
Jakub Pawlowski [Thu, 24 May 2018 19:27:10 +0000 (12:27 -0700)]
Fix log level - requesting MTU is not error
Test: compilation
Change-Id: Idf99af22cf4d29f6fb3da08e86e36b3394617c4f
Jakub Pawlowski [Fri, 25 May 2018 16:31:26 +0000 (09:31 -0700)]
Linux build fix
Test: compile on linux
Change-Id: I831df72da8bdec17c4d9c87ebdfb333024eb964c
Treehugger Robot [Thu, 24 May 2018 22:52:05 +0000 (22:52 +0000)]
Merge "Add separate sniff mode settings for gamepads"
Treehugger Robot [Thu, 24 May 2018 22:52:05 +0000 (22:52 +0000)]
Merge changes from topic "ds4-support"
* changes:
Add UHID GET_REPORT functionality
Option to send data report through BTA_HhSetReport
Kim Low [Wed, 20 Dec 2017 23:11:08 +0000 (15:11 -0800)]
Add separate sniff mode settings for gamepads
For gamepads, the sniff intervals need to be much shorter. The
min is set to 14 slots (8.75ms) and max is set to 18 slots
(11.25ms).
Test: Load >=4.10 hid-sony driver, connect a DualShock4, check its
responsiveness.
Wait for 5 minutes, wake it up (if it went into PARK mode)
and check that it's still as responsive.
Furthermore, use a Bluetooth sniffer to confirm the sniff
interval.
Bug:
38511270
Change-Id: I27e2e0c8e88ab51800c4976e0971c92a3793f8d2
Kim Low [Thu, 6 Apr 2017 20:16:26 +0000 (13:16 -0700)]
Add UHID GET_REPORT functionality
GET_REPORT wasn't supported previously. >=4.10 hid-sony driver
requires this feature to get the calibration data for DualShock4.
To be backwards compatible with kernel 3.10, UHID_FEATURE and
UHID_FEATURE_ANSWER are used instead of UHID_GET_REPORT and
UHID_GET_REPORT_REPLY. Also, UHID_SET_REPORT functionality cannot
be supported since it's not implemented in kernel 3.10.
Test: Load >=4.10 hid-sony driver, connect a DualShock4, and check
that the DualShock4 LED turns blue, which confirms both
get feature report and output data report working.
Bug:
38511270
Change-Id: Ic28760f423cc09754fd32a107a499be6677ca747
Kim Low [Thu, 6 Apr 2017 19:33:14 +0000 (12:33 -0700)]
Option to send data report through BTA_HhSetReport
Drivers may send SET_FEATURE_REPORT by using type UHID_OUTPUT
and output.rtype UHID_FEATURE_REPORT, or send OUTPUT_DATA_REPORT
by using type UHID_OUTPUT and output.rtype UHID_OUTPUT_REPORT.
For type UHID_OUTPUT, the Fluoride stack calls btif_hh_setreport()
which then calls BTA_HhSetReport() correspondingly. Hence it is
necessary for BTA_HhSetReport() to handle both the output.type
UHID_FEATURE_REPORT (BTA_HH_RPTT_FEATURE) and UHID_DATA_REPORT
(BTA_HH_RPTT_OUTPUT).
Test: No stand-alone test.
Bug:
38511270
Change-Id: I210f6338d3152dad100920dc8a1eb69b563b70ae
Sunny Kapdi [Wed, 23 May 2018 22:14:35 +0000 (15:14 -0700)]
A2DP Offload: Don't crash on repeated endSession
AudioOffload endSession is called from multiple places.
Do not crash if session has already ended.
Also, added/enabled extra log messages to help debug similar issues.
Bug:
80148693
Test: Manual
Change-Id: I409c0146f9629cee6bdabf16e52e88201ee02267
Treehugger Robot [Thu, 24 May 2018 03:37:54 +0000 (03:37 +0000)]
Merge "GATT: Fix GATT error response for execute write"
Treehugger Robot [Wed, 23 May 2018 23:59:08 +0000 (23:59 +0000)]
Merge "Increase LE connection interval with bonded Hearing Aids"
Treehugger Robot [Wed, 23 May 2018 23:52:58 +0000 (23:52 +0000)]
Merge "Enable the AVRCP Service by default (2/2)"
Ajay Panicker [Wed, 11 Apr 2018 18:16:26 +0000 (11:16 -0700)]
Enable the AVRCP Service by default (2/2)
Bug:
80188446
Test: Flash a device and see that AvrcpTargetService is enabled
Change-Id: I1ad1fff07b5ee6c553fc89a75e649789d82f85cc
Merged-In: I1ad1fff07b5ee6c553fc89a75e649789d82f85cc
Stanley Tng [Wed, 23 May 2018 01:15:42 +0000 (18:15 -0700)]
Increase LE connection interval with bonded Hearing Aids
When there are bonded Hearing Aids device, increase the minimum LE
Connection Interval to reduce the audio noises on the devices.
Bug:
80079923
Test: Manual test with RAT mouse and HA devices
Change-Id: I589bc574ef7ff3754a149e30fb3c0a685ce27823
Treehugger Robot [Wed, 23 May 2018 20:46:44 +0000 (20:46 +0000)]
Merge "HFP: Ignore DISCONNECTED state in PhoneStateChange"
Jack He [Wed, 23 May 2018 00:35:57 +0000 (17:35 -0700)]
HFP: Ignore DISCONNECTED state in PhoneStateChange
* DISCONNECTED state is a transient state from Telecom service and will
always lead to IDLE state when the call is completely disconnected
* This state should be ignored as HFP specification does not handle
cases when a call is being disconnected
Bug:
78674822
Test: Receive incoming call and hangup
Change-Id: Icebdf9b5fdffad3e2b78645d4f0c69ec13b2604c
Pavlin Radoslavov [Wed, 23 May 2018 14:40:09 +0000 (07:40 -0700)]
Reduce A2DP/AVDTP related dumpsys output
* Don't print control blocks that are not in use
* Print some sections only if the runtime trace level is DEBUG(=5) or above
* Renamed section "A2DP Codecs and Peers State:" to
"A2DP Peers State:"
Bug:
80179152
Test: Manual
Change-Id: I9fcd7387ed469094132d5be989d4976ce103cfc8
Subramanian Srinivasan [Wed, 23 May 2018 02:35:48 +0000 (19:35 -0700)]
GATT: Fix GATT error response for execute write
Usecaes:
Execute GATT/SR/GAW/BI-09C
Expected Result:
Test case passes
Observed Result:
Unable to pass the test cases
Root Cause:
Incorrect error response sent by DUT if there is no pending write request
Fix:
Send GATT_INVALID_OFFSET error when no pending write request
Test: GATT/SR/GAW/BI-09C passes
Bug:
80168519
Change-Id: I74e723ab0e39ce04e21f929a16dffcd996d1d23e
Pavlin Radoslavov [Wed, 23 May 2018 00:56:22 +0000 (17:56 -0700)]
Explicitly stop the stream when the A2DP session ends
Note: this needs to be done only for the A2DP HW offload scenario.
For the software data path, this will be done by the Audio HAL.
Bug:
80117050
Test: Manual
Change-Id: I4397d219d82d779706e946f0c7f833c1e93e91f4
Treehugger Robot [Tue, 22 May 2018 23:01:26 +0000 (23:01 +0000)]
Merge "Update connection parameters just once before GATT discovery"
Joseph Pirozzo [Tue, 22 May 2018 22:20:02 +0000 (22:20 +0000)]
Merge "Support AVRCP Controller on JNI thread"
Jakub Pawlowski [Tue, 22 May 2018 21:15:31 +0000 (14:15 -0700)]
Update connection parameters just once before GATT discovery
Call to L2CA_EnableUpdateBleConnParams is already made just before
call to bta_gattc_set_discover_st
Test: compilation
Change-Id: I30939065b5486e20c2f6f456dde96266e9395690
Treehugger Robot [Tue, 22 May 2018 18:17:38 +0000 (18:17 +0000)]
Merge "HFP: Set audio handle for active device during incoming call"
Treehugger Robot [Tue, 22 May 2018 17:32:18 +0000 (17:32 +0000)]
Merge "Use the effective peer MTU when preparing the codec configuration"
Treehugger Robot [Tue, 22 May 2018 17:25:31 +0000 (17:25 +0000)]
Merge "Don't mix internal AVDTP state when connecting to two devices"
Treehugger Robot [Tue, 22 May 2018 16:28:29 +0000 (16:28 +0000)]
Merge "gatt_api: Avoid possible NULL dereference"
Pavlin Radoslavov [Tue, 22 May 2018 09:03:20 +0000 (02:03 -0700)]
Use the effective peer MTU when preparing the codec configuration
Added new method A2dpCodecConfig::getEffectiveMtu() and use it
to obtain the effective MTU per peer per codec.
The effective peer MTU could be smaller than the one reported
by the peer (e.g., for interoperability reasons).
Bug:
77913350
Test: Manual
Change-Id: Idd5230681ac5856fd18dd33ac48723c6ea609e16