OSDN Git Service
Edgar E. Iglesias [Wed, 4 Apr 2018 11:47:33 +0000 (13:47 +0200)]
target-microblaze: dec_load: Use bool instead of unsigned int
Use bool instead of unsigned int to represent flags.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Fri, 25 May 2018 09:04:36 +0000 (10:04 +0100)]
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-2.13-pull-request' into staging
This pull request includes:
- fixes for some comments
- netlink update and fix
- rework/cleanup fo socket.h,
including fixes for SPARC part.
# gpg: Signature made Fri 25 May 2018 09:16:21 BST
# gpg: using RSA key
F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-2.13-pull-request:
gdbstub: Clarify what gdb_handlesig() is doing
linux-user: define TARGET_SO_REUSEPORT
linux-user: copy sparc/sockbits.h definitions from linux
linux-user: update ARCH_HAS_SOCKET_TYPES use
linux-user: move ppc socket.h definitions to ppc/sockbits.h
linux-user: move socket.h generic definitions to generic/sockbits.h
linux-user: move sparc/sparc64 socket.h definitions to sparc/sockbits.h
linux-user: move alpha socket.h definitions to alpha/sockbits.h
linux-user: move mips socket.h definitions to mips/sockbits.h
linux-user: Fix payload size logic in host_to_target_cmsg()
linux-user: update comments to point to tcg_exec_init()
linux-user: update netlink emulation
linux-user: Assert on bad type in thunk_type_align() and thunk_type_size()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 15 May 2018 18:19:58 +0000 (19:19 +0100)]
gdbstub: Clarify what gdb_handlesig() is doing
gdb_handlesig()'s behaviour is not entirely obvious at first
glance. Add a doc comment for it, and also add a comment
explaining why it's ok for gdb_do_syscallv() to ignore
gdb_handlesig()'s return value. (Coverity complains about
this: CID
1390850.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20180515181958.25837-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:56 +0000 (11:29 +0200)]
linux-user: define TARGET_SO_REUSEPORT
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20180519092956.15134-9-laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:55 +0000 (11:29 +0200)]
linux-user: copy sparc/sockbits.h definitions from linux
Values defined for sparc are not correct.
Copy the content of "arch/sparc/include/uapi/asm/socket.h"
to fix them.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20180519092956.15134-8-laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:54 +0000 (11:29 +0200)]
linux-user: update ARCH_HAS_SOCKET_TYPES use
to be like in the kernel and rename it TARGET_ARCH_HAS_SOCKET_TYPES
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20180519092956.15134-7-laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:53 +0000 (11:29 +0200)]
linux-user: move ppc socket.h definitions to ppc/sockbits.h
Change conditional #ifdef part by #undef of the symbols
redefined for PPC relative to generic/socket.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20180519092956.15134-6-laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:52 +0000 (11:29 +0200)]
linux-user: move socket.h generic definitions to generic/sockbits.h
and include the file from architectures without specific definitions
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20180519092956.15134-5-laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:51 +0000 (11:29 +0200)]
linux-user: move sparc/sparc64 socket.h definitions to sparc/sockbits.h
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20180519092956.15134-4-laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:50 +0000 (11:29 +0200)]
linux-user: move alpha socket.h definitions to alpha/sockbits.h
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20180519092956.15134-3-laurent@vivier.eu>
Laurent Vivier [Sat, 19 May 2018 09:29:49 +0000 (11:29 +0200)]
linux-user: move mips socket.h definitions to mips/sockbits.h
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20180519092956.15134-2-laurent@vivier.eu>
Peter Maydell [Fri, 18 May 2018 18:47:15 +0000 (19:47 +0100)]
linux-user: Fix payload size logic in host_to_target_cmsg()
Coverity points out that there's a missing break in the switch in
host_to_target_cmsg() where we update tgt_len for
cmsg_level/cmsg_type combinations which require a different length
for host and target (CID
1385425). To avoid duplicating the default
case (target length same as host) in both switches, set that before
the switch so that only the cases which want to override it need any
code.
This fixes a bug where we would have used the wrong length
for SOL_SOCKET/SO_TIMESTAMP messages where the target and
host have differently sized 'struct timeval' (ie one is 32
bit and the other is 64 bit).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
20180518184715.29833-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Igor Mammedov [Thu, 17 May 2018 11:51:17 +0000 (13:51 +0200)]
linux-user: update comments to point to tcg_exec_init()
cpu_init() was replaced by cpu_create() since 2.12 but comments
weren't updated. So update stale comments to point that page
sizes arei actually initialized by tcg_exec_init(). Also move
another qemu_host_page_size related comment before tcg_exec_init()
where it belongs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
1526557877-293151-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Laurent Vivier [Wed, 16 May 2018 22:12:13 +0000 (00:12 +0200)]
linux-user: update netlink emulation
Update enums with entries from linux 4.17
Translate entries that generate logs with iproute2 4.9.0 and
host kernel 4.15:
# ip address show
Unknown host QEMU_IFLA type: 43
Unknown host QEMU_IFLA type: 43
Unknown host QEMU_IFLA type: 43
Unknown QEMU_IFLA_BR type 41
Unknown QEMU_IFLA_BR type 42
Unknown QEMU_IFLA_BR type 43
Unknown QEMU_IFLA_BR type 44
Unknown host QEMU_IFLA type: 43
Unknown QEMU_IFLA_BR type 41
Unknown QEMU_IFLA_BR type 42
Unknown QEMU_IFLA_BR type 43
Unknown QEMU_IFLA_BR type 44
Unknown host QEMU_IFLA type: 43
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
20180516221213.11111-1-laurent@vivier.eu>
Peter Maydell [Mon, 14 May 2018 17:46:16 +0000 (18:46 +0100)]
linux-user: Assert on bad type in thunk_type_align() and thunk_type_size()
In thunk_type_align() and thunk_type_size() we currently return
-1 if the value at the type_ptr isn't one of the TYPE_* values
we understand. However, this should never happen, and if it does
then the calling code will go confusingly wrong because none
of the callsites try to handle an error return. Switch to an
assertion instead, so that if this does somehow happen we'll have
a nice clear backtrace of what happened rather than a weird crash
or misbehaviour.
This also silences various Coverity complaints about not handling
the negative return value (CID
1005735,
1005736,
1005738,
1390582).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
20180514174616.19601-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Peter Maydell [Thu, 24 May 2018 16:48:01 +0000 (17:48 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/vga-
20180524-pull-request' into staging
vga: catch depth 0
hw/display: add new bochs-display device
some cleanups.
# gpg: Signature made Thu 24 May 2018 16:45:46 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/vga-
20180524-pull-request:
MAINTAINERS: add vga entries
bochs-display: add pcie support
bochs-display: add dirty tracking support
hw/display: add new bochs-display device
vga-pci: use PCI_VGA_MMIO_SIZE
vga: move bochs vbe defines to header file
vga: catch depth 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 24 May 2018 13:22:23 +0000 (14:22 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio, vhost: fixes, features
Beginning of merging vDPA, new PCI ID, a new virtio balloon stat, intel
iommu rework fixing a couple of security problems (no CVEs yet), fixes
all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 23 May 2018 15:41:32 BST
# gpg: using RSA key
281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (28 commits)
intel-iommu: rework the page walk logic
util: implement simple iova tree
intel-iommu: trace domain id during page walk
intel-iommu: pass in address space when page walk
intel-iommu: introduce vtd_page_walk_info
intel-iommu: only do page walk for MAP notifiers
intel-iommu: add iommu lock
intel-iommu: remove IntelIOMMUNotifierNode
intel-iommu: send PSI always even if across PDEs
nvdimm: fix typo in label-size definition
contrib/vhost-user-blk: enable protocol feature for vhost-user-blk
hw/virtio: Fix brace Werror with clang 6.0.0
libvhost-user: Send messages with no data
vhost-user+postcopy: Use qemu_set_nonblock
virtio: support setting memory region based host notifier
vhost-user: support receiving file descriptors in slave_read
vhost-user: add Net prefix to internal state structure
linux-headers: add kvm header for mips
linux-headers: add unistd.h on all arches
update-linux-headers.sh: unistd.h, kvm consistency
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 24 May 2018 12:24:22 +0000 (13:24 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Generic background jobs
- qemu-iotests fixes for NFS and the 'migration' group
- sheepdog: Minor code simplification
# gpg: Signature made Wed 23 May 2018 13:33:49 BST
# gpg: using RSA key
7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (46 commits)
qemu-iotests: Test job-* with block jobs
iotests: Move qmp_to_opts() to VM
blockjob: Remove BlockJob.driver
job: Add query-jobs QMP command
job: Add lifecycle QMP commands
job: Add JOB_STATUS_CHANGE QMP event
job: Introduce qapi/job.json
job: Move progress fields to Job
job: Add job_transition_to_ready()
job: Add job_is_ready()
job: Add job_dismiss()
job: Add job_yield()
block: Cancel job in bdrv_close_all() callers
job: Move completion and cancellation to Job
job: Move transactions to Job
job: Switch transactions to JobTxn
job: Move job_finish_sync() to Job
job: Move .complete callback to Job
job: Add job_drain()
job: Convert block_job_cancel_async() to Job
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 24 May 2018 10:30:59 +0000 (11:30 +0100)]
Merge remote-tracking branch 'remotes/sstabellini-http/tags/xen-
20180522-tag' into staging
Xen 2018/05/22
# gpg: Signature made Tue 22 May 2018 19:44:06 BST
# gpg: using RSA key
894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini-http/tags/xen-
20180522-tag:
xen_disk: be consistent with use of xendev and blkdev->xendev
xen_disk: use a single entry iovec
xen_backend: make the xen_feature_grant_copy flag private
xen_disk: remove use of grant map/unmap
xen_backend: add an emulation of grant copy
xen: remove other open-coded use of libxengnttab
xen_disk: remove open-coded use of libxengnttab
xen_backend: add grant table helpers
xen: add a meaningful declaration of grant_copy_segment into xen_common.h
checkpatch: generalize xen handle matching in the list of types
xen-hvm: create separate function for ioreq server initialization
xen_pt: Present the size of 64 bit BARs correctly
configure: Add explanation for --enable-xen-pci-passthrough
xen/pt: use address_space_memory object for memory region hooks
xen-pvdevice: Introduce a simplistic xen-pvdevice save state
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 24 May 2018 09:25:43 +0000 (10:25 +0100)]
Merge remote-tracking branch 'remotes/mwalle/tags/lm32-queue/
20180521' into staging
target/lm32: BQL patch
# gpg: Signature made Tue 22 May 2018 19:25:30 BST
# gpg: using RSA key
B458ABB0D8D378E3
# gpg: Good signature from "Michael Walle <michael@walle.cc>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2190 3E48 4537 A7C2 90CE 3EB2 B458 ABB0 D8D3 78E3
* remotes/mwalle/tags/lm32-queue/
20180521:
lm32: take BQL before writing IP/IM register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Tue, 22 May 2018 16:50:58 +0000 (18:50 +0200)]
MAINTAINERS: add vga entries
Add entries for standard vga, virtio-gpu and cirrus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180522165058.15404-7-kraxel@redhat.com
Gerd Hoffmann [Tue, 22 May 2018 16:50:57 +0000 (18:50 +0200)]
bochs-display: add pcie support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
20180522165058.15404-6-kraxel@redhat.com
Gerd Hoffmann [Tue, 22 May 2018 16:50:56 +0000 (18:50 +0200)]
bochs-display: add dirty tracking support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20180522165058.15404-5-kraxel@redhat.com
Gerd Hoffmann [Tue, 22 May 2018 16:50:55 +0000 (18:50 +0200)]
hw/display: add new bochs-display device
After writing up the virtual mdev device emulating a display supporting
the bochs vbe dispi interface (mbochs.ko) and seeing how simple it
actually is I've figured that would be useful for qemu too.
So, here it is, -device bochs-display. It is basically -device VGA
without legacy vga emulation. PCI bar 0 is the framebuffer, PCI bar 2
is mmio with the registers. The vga registers are simply not there
though, neither in the legacy ioport location nor in the mmio bar.
Consequently it is PCI class DISPLAY_OTHER not DISPLAY_VGA.
So there is no text mode emulation, no weird video modes (planar,
256color palette), no memory window at 0xa0000. Just a linear
framebuffer in the pci memory bar. And the amount of code to emulate
this (and therefore the attack surface) is an order of magnitude smaller
when compared to vga emulation.
Compatibility wise it works with OVMF (latest git master).
The bochs-drm.ko linux kernel module can handle it just fine too.
So UEFI guests should not see any functional difference to VGA.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20180522165058.15404-4-kraxel@redhat.com
Gerd Hoffmann [Tue, 22 May 2018 16:50:54 +0000 (18:50 +0200)]
vga-pci: use PCI_VGA_MMIO_SIZE
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180522165058.15404-3-kraxel@redhat.com
Gerd Hoffmann [Tue, 22 May 2018 16:50:53 +0000 (18:50 +0200)]
vga: move bochs vbe defines to header file
Create a new header file, move the bochs vbe dispi interface
defines to it, so they can be used outside vga code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20180522165058.15404-2-kraxel@redhat.com
Gerd Hoffmann [Mon, 14 May 2018 10:31:17 +0000 (12:31 +0200)]
vga: catch depth 0
depth == 0 is used to indicate 256 color modes. Our region calculation
goes wrong in that case. So detect that and just take the safe code
path we already have for the wraparound case.
While being at it also catch depth == 15 (where our region size
calculation goes wrong too). And make the comment more verbose,
explaining what is going on here.
Without this windows guest install might trigger an assert due to trying
to check dirty bitmap outside the snapshot region.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=
1575541
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
20180514103117.21059-1-kraxel@redhat.com
Peter Xu [Fri, 18 May 2018 07:25:17 +0000 (15:25 +0800)]
intel-iommu: rework the page walk logic
This patch fixes a potential small window that the DMA page table might
be incomplete or invalid when the guest sends domain/context
invalidations to a device. This can cause random DMA errors for
assigned devices.
This is a major change to the VT-d shadow page walking logic. It
includes but is not limited to:
- For each VTDAddressSpace, now we maintain what IOVA ranges we have
mapped and what we have not. With that information, now we only send
MAP or UNMAP when necessary. Say, we don't send MAP notifies if we
know we have already mapped the range, meanwhile we don't send UNMAP
notifies if we know we never mapped the range at all.
- Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call
in any places to resync the shadow page table for a device.
- When we receive domain/context invalidation, we should not really run
the replay logic, instead we use the new sync shadow page table API to
resync the whole shadow page table without unmapping the whole
region. After this change, we'll only do the page walk once for each
domain invalidations (before this, it can be multiple, depending on
number of notifiers per address space).
While at it, the page walking logic is also refactored to be simpler.
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Tested-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:16 +0000 (15:25 +0800)]
util: implement simple iova tree
Introduce a simplest iova tree implementation based on GTree.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:15 +0000 (15:25 +0800)]
intel-iommu: trace domain id during page walk
This patch only modifies the trace points.
Previously we were tracing page walk levels. They are redundant since
we have page mask (size) already. Now we trace something much more
useful which is the domain ID of the page walking. That can be very
useful when we trace more than one devices on the same system, so that
we can know which map is for which domain.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:14 +0000 (15:25 +0800)]
intel-iommu: pass in address space when page walk
We pass in the VTDAddressSpace too. It'll be used in the follow up
patches.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:13 +0000 (15:25 +0800)]
intel-iommu: introduce vtd_page_walk_info
During the recursive page walking of IOVA page tables, some stack
variables are constant variables and never changed during the whole page
walking procedure. Isolate them into a struct so that we don't need to
pass those contants down the stack every time and multiple times.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:12 +0000 (15:25 +0800)]
intel-iommu: only do page walk for MAP notifiers
For UNMAP-only IOMMU notifiers, we don't need to walk the page tables.
Fasten that procedure by skipping the page table walk. That should
boost performance for UNMAP-only notifiers like vhost.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:11 +0000 (15:25 +0800)]
intel-iommu: add iommu lock
SECURITY IMPLICATION: this patch fixes a potential race when multiple
threads access the IOMMU IOTLB cache.
Add a per-iommu big lock to protect IOMMU status. Currently the only
thing to be protected is the IOTLB/context cache, since that can be
accessed even without BQL, e.g., in IO dataplane.
Note that we don't need to protect device page tables since that's fully
controlled by the guest kernel. However there is still possibility that
malicious drivers will program the device to not obey the rule. In that
case QEMU can't really do anything useful, instead the guest itself will
be responsible for all uncertainties.
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:10 +0000 (15:25 +0800)]
intel-iommu: remove IntelIOMMUNotifierNode
That is not really necessary. Removing that node struct and put the
list entry directly into VTDAddressSpace. It simplfies the code a lot.
Since at it, rename the old notifiers_list into vtd_as_with_notifiers.
CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 18 May 2018 07:25:09 +0000 (15:25 +0800)]
intel-iommu: send PSI always even if across PDEs
SECURITY IMPLICATION: without this patch, any guest with both assigned
device and a vIOMMU might encounter stale IO page mappings even if guest
has already unmapped the page, which may lead to guest memory
corruption. The stale mappings will only be limited to the guest's own
memory range, so it should not affect the host memory or other guests on
the host.
During IOVA page table walking, there is a special case when the PSI
covers one whole PDE (Page Directory Entry, which contains 512 Page
Table Entries) or more. In the past, we skip that entry and we don't
notify the IOMMU notifiers. This is not correct. We should send UNMAP
notification to registered UNMAP notifiers in this case.
For UNMAP only notifiers, this might cause IOTLBs cached in the devices
even if they were already invalid. For MAP/UNMAP notifiers like
vfio-pci, this will cause stale page mappings.
This special case doesn't trigger often, but it is very easy to be
triggered by nested device assignments, since in that case we'll
possibly map the whole L2 guest RAM region into the device's IOVA
address space (several GBs at least), which is far bigger than normal
kernel driver usages of the device (tens of MBs normally).
Without this patch applied to L1 QEMU, nested device assignment to L2
guests will dump some errors like:
qemu-system-x86_64: VFIO_MAP_DMA: -17
qemu-system-x86_64: vfio_dma_map(0x557305420c30, 0xad000, 0x1000,
0x7f89a920d000) = -17 (File exists)
CC: QEMU Stable <qemu-stable@nongnu.org>
Acked-by: Jason Wang <jasowang@redhat.com>
[peterx: rewrite the commit message]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ross Zwisler [Mon, 21 May 2018 16:32:00 +0000 (10:32 -0600)]
nvdimm: fix typo in label-size definition
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Fixes: commit
da6789c27c2e ("nvdimm: add a macro for property "label-size"")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Cc: Haozhong Zhang <haozhong.zhang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changpeng Liu [Fri, 18 May 2018 22:20:46 +0000 (06:20 +0800)]
contrib/vhost-user-blk: enable protocol feature for vhost-user-blk
This patch reports the protocol feature that is only advertised by
QEMU if the device implements the config ops.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Richard Henderson [Sat, 12 May 2018 04:59:40 +0000 (21:59 -0700)]
hw/virtio: Fix brace Werror with clang 6.0.0
The warning is
hw/virtio/vhost-user.c:1319:26: error: suggest braces
around initialization of subobject [-Werror,-Wmissing-braces]
VhostUserMsg msg = { 0 };
^
{}
While the original code is correct, and technically exactly correct
as per ISO C89, both GCC and Clang support plain empty set of braces
as an extension.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dr. David Alan Gilbert [Fri, 4 May 2018 09:53:46 +0000 (10:53 +0100)]
libvhost-user: Send messages with no data
The response to a VHOST_USER_POSTCOPY_ADVISE contains a fd but doesn't
actually contain any data. FIx vu_message_write so that it doesn't
do a 0-byte write() call, since this was ending up with rc=0
that was confusing the error handling code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dr. David Alan Gilbert [Wed, 2 May 2018 10:55:52 +0000 (11:55 +0100)]
vhost-user+postcopy: Use qemu_set_nonblock
Use qemu_set_nonblock rather than a simple fcntl; cleaner
and I have no reason to change other flags.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tiwei Bie [Thu, 12 Apr 2018 15:12:30 +0000 (23:12 +0800)]
virtio: support setting memory region based host notifier
This patch introduces the support for setting memory region
based host notifiers for virtio device. This is helpful when
using a hardware accelerator for a virtio device, because
hardware heavily depends on the notification, this will allow
the guest driver in the VM to notify the hardware directly.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tiwei Bie [Thu, 12 Apr 2018 15:12:29 +0000 (23:12 +0800)]
vhost-user: support receiving file descriptors in slave_read
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kevin Wolf [Tue, 8 May 2018 12:04:58 +0000 (14:04 +0200)]
qemu-iotests: Test job-* with block jobs
This adds a test case that tests the new job-* QMP commands with
mirror and backup block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 8 May 2018 16:10:16 +0000 (18:10 +0200)]
iotests: Move qmp_to_opts() to VM
qmp_to_opts() used to be a method of QMPTestCase, but recently we
started to add more Python test cases that don't make use of
QMPTestCase. In order to make the method usable there, move it to VM.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 14 May 2018 12:51:21 +0000 (14:51 +0200)]
blockjob: Remove BlockJob.driver
BlockJob.driver is redundant with Job.driver and only used in very few
places any more. Remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 4 May 2018 14:25:43 +0000 (16:25 +0200)]
job: Add query-jobs QMP command
This adds a minimal query-jobs implementation that shouldn't pose many
design questions. It can later be extended to expose more information,
and especially job-specific information.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 3 May 2018 17:01:14 +0000 (19:01 +0200)]
job: Add lifecycle QMP commands
This adds QMP commands that control the transition between states of the
job lifecycle.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 30 Apr 2018 17:09:46 +0000 (19:09 +0200)]
job: Add JOB_STATUS_CHANGE QMP event
This adds a QMP event that is emitted whenever a job transitions from
one status to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Wed, 16 May 2018 14:03:10 +0000 (16:03 +0200)]
job: Introduce qapi/job.json
This adds a separate schema file for all job-related definitions that
aren't tied to the block layer.
For a start, move the enums JobType, JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 4 May 2018 10:17:20 +0000 (12:17 +0200)]
job: Move progress fields to Job
BlockJob has fields .offset and .len, which are actually misnomers today
because they are no longer tied to block device sizes, but just progress
counters. As such they make a lot of sense in generic Jobs.
This patch moves the fields to Job and renames them to .progress_current
and .progress_total to describe their function better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 25 Apr 2018 12:56:09 +0000 (14:56 +0200)]
job: Add job_transition_to_ready()
The transition to the READY state was still performed in the BlockJob
layer, in the same function that sent the BLOCK_JOB_READY QMP event.
This patch brings the state transition to the Job layer and implements
the QMP event using a notifier called from the Job layer, like we
already do for other events related to state transitions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 25 Apr 2018 13:09:58 +0000 (15:09 +0200)]
job: Add job_is_ready()
Instead of having a 'bool ready' in BlockJob, add a function that
derives its value from the job status.
At the same time, this fixes the behaviour to match what the QAPI
documentation promises for query-block-job: 'true if the job may be
completed'. When the ready flag was introduced in commit
ef6dbf1e46e,
the flag never had to be reset to match the description because after
being ready, the jobs would immediately complete and disappear.
Job transactions and manual job finalisation were introduced only later.
With these changes, jobs may stay around even after having completed
(and they are not ready to be completed a second time), however their
patches forgot to reset the ready flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Tue, 24 Apr 2018 15:10:12 +0000 (17:10 +0200)]
job: Add job_dismiss()
This moves block_job_dismiss() to the Job layer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Tue, 24 Apr 2018 14:55:04 +0000 (16:55 +0200)]
job: Add job_yield()
This moves block_job_yield() to the Job layer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 16 May 2018 11:46:37 +0000 (13:46 +0200)]
block: Cancel job in bdrv_close_all() callers
Now that we cancel all jobs and not only block jobs on shutdown, doing
that in bdrv_close_all() isn't really appropriate any more. Move the
job_cancel_sync_all() call to the callers, and only assert that there
are no job running in bdrv_close_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 24 Apr 2018 14:13:52 +0000 (16:13 +0200)]
job: Move completion and cancellation to Job
This moves the top-level job completion and cancellation functions from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 23 Apr 2018 14:06:26 +0000 (16:06 +0200)]
job: Move transactions to Job
This moves the logic that implements job transactions from BlockJob to
Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 19 Apr 2018 14:09:52 +0000 (16:09 +0200)]
job: Switch transactions to JobTxn
This doesn't actually move any transaction code to Job yet, but it
renames the type for transactions from BlockJobTxn to JobTxn and makes
them contain Jobs rather than BlockJobs
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 20 Apr 2018 13:33:57 +0000 (15:33 +0200)]
job: Move job_finish_sync() to Job
block_job_finish_sync() doesn't contain anything block job specific any
more, so it can be moved to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 23 Apr 2018 10:24:16 +0000 (12:24 +0200)]
job: Move .complete callback to Job
This moves the .complete callback that tells a READY job to complete
from BlockJobDriver to JobDriver. The wrapper function job_complete()
doesn't require anything block job specific any more and can be moved
to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 20 Apr 2018 15:00:29 +0000 (17:00 +0200)]
job: Add job_drain()
block_job_drain() contains a blk_drain() call which cannot be moved to
Job, so add a new JobDriver callback JobDriver.drain which has a common
implementation for all BlockJobs. In addition to this we keep the
existing BlockJobDriver.drain callback that is called by the common
drain implementation for all block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 20 Apr 2018 12:56:08 +0000 (14:56 +0200)]
job: Convert block_job_cancel_async() to Job
block_job_cancel_async() did two things that were still block job
specific:
* Setting job->force. This field makes sense on the Job level, so we can
just move it. While at it, rename it to job->force_cancel to make its
purpose more obvious.
* Resetting the I/O status. This can't be moved because generic Jobs
don't have an I/O status. What the function really implements is a
user resume, except without entering the coroutine. Consequently, it
makes sense to call the .user_resume driver callback here which
already resets the I/O status.
The old block_job_cancel_async() has two separate if statements that
check job->iostatus != BLOCK_DEVICE_IO_STATUS_OK and job->user_paused.
However, the former condition always implies the latter (as is
asserted in block_job_iostatus_reset()), so changing the explicit call
of block_job_iostatus_reset() on the former condition with the
.user_resume callback on the latter condition is equivalent and
doesn't need to access any BlockJob specific state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 19 Apr 2018 15:30:16 +0000 (17:30 +0200)]
job: Move single job finalisation to Job
This moves the finalisation of a single job from BlockJob to Job.
Some part of this code depends on job transactions, and job transactions
call this code, we introduce some temporary calls from Job functions to
BlockJob ones. This will be fixed once transactions move to Job, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 23 Apr 2018 16:04:57 +0000 (18:04 +0200)]
job: Add job_event_*()
Go through the Job layer in order to send QMP events. For the moment,
these functions only call a notifier in the BlockJob layer that sends
the existing commands.
This uses notifiers rather than JobDriver callbacks because internal
users of jobs won't receive QMP events, but might still be interested
in getting notified for the events.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 23 Apr 2018 15:09:42 +0000 (17:09 +0200)]
blockjob: Split block_job_event_pending()
block_job_event_pending() doesn't only send a QMP event, but it also
transitions to the PENDING state. Split the function so that we get one
part only sending the event (like other block_job_event_* functions) and
another part that does the state transition.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 19 Apr 2018 15:54:56 +0000 (17:54 +0200)]
job: Move BlockJobCreateFlags to Job
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 19 Apr 2018 11:04:01 +0000 (13:04 +0200)]
job: Replace BlockJob.completed with job_is_completed()
Since we introduced an explicit status to block job, BlockJob.completed
is redundant because it can be derived from the status. Remove the field
from BlockJob and add a function to derive it from the status at the Job
level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Wed, 18 Apr 2018 15:10:26 +0000 (17:10 +0200)]
job: Move pause/resume functions to Job
While we already moved the state related to job pausing to Job, the
functions to do were still BlockJob only. This commit moves them over to
Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Wed, 18 Apr 2018 14:32:20 +0000 (16:32 +0200)]
job: Add job_sleep_ns()
There is nothing block layer specific about block_job_sleep_ns(), so
move the function to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 13 Apr 2018 15:31:02 +0000 (17:31 +0200)]
job: Move coroutine and related code to Job
This commit moves some core functions for dealing with the job coroutine
from BlockJob to Job. This includes primarily entering the coroutine
(both for the first and reentering) and yielding explicitly and at pause
points.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Tue, 17 Apr 2018 14:41:17 +0000 (16:41 +0200)]
job: Move defer_to_main_loop to Job
Move the defer_to_main_loop functionality from BlockJob to Job.
The code can be simplified because we can use job->aio_context in
job_defer_to_main_loop_bh() now, instead of having to access the
BlockDriverState.
Probably taking the data->aio_context lock in addition was already
unnecessary in the old code because we didn't actually make use of
anything protected by the old AioContext except getting the new
AioContext, in case it changed between scheduling the BH and running it.
But it's certainly unnecessary now that the BDS isn't accessed at all
any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Tue, 17 Apr 2018 11:49:33 +0000 (13:49 +0200)]
job: Add Job.aio_context
When block jobs need an AioContext, they just take it from their main
block node. Generic jobs don't have a main block node, so we need to
assign them an AioContext explicitly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Tue, 17 Apr 2018 10:56:07 +0000 (12:56 +0200)]
job: Move cancelled to Job
We cannot yet move the whole logic around job cancelling to Job because
it depends on quite a few other things that are still only in BlockJob,
but we can move the cancelled field at least.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Fri, 13 Apr 2018 16:50:05 +0000 (18:50 +0200)]
job: Add reference counting
This moves reference counting from BlockJob to Job.
In order to keep calling the BlockJob cleanup code when the job is
deleted via job_unref(), introduce a new JobDriver.free callback. Every
block job must use block_job_free() for this callback, this is asserted
in block_job_create().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Fri, 13 Apr 2018 15:19:31 +0000 (17:19 +0200)]
job: Move state transitions to Job
This moves BlockJob.status and the closely related functions
(block_)job_state_transition() and (block_)job_apply_verb to Job. The
two QAPI enums are renamed to JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 12 Apr 2018 15:54:37 +0000 (17:54 +0200)]
job: Maintain a list of all jobs
This moves the job list from BlockJob to Job. Now we can check for
duplicate IDs in job_create().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Thu, 12 Apr 2018 17:06:53 +0000 (19:06 +0200)]
job: Add job_delete()
This moves freeing the Job object and its fields from block_job_unref()
to job_delete().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Thu, 12 Apr 2018 15:57:08 +0000 (17:57 +0200)]
job: Add JobDriver.job_type
This moves the job_type field from BlockJobDriver to JobDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Thu, 12 Apr 2018 16:01:07 +0000 (18:01 +0200)]
job: Rename BlockJobType into JobType
QAPI types aren't externally visible, so we can rename them without
causing problems. Before we add a job type to Job, rename the enum
so it can be used for more than just block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Thu, 12 Apr 2018 15:29:59 +0000 (17:29 +0200)]
job: Create Job, JobDriver and job_create()
This is the first step towards creating an infrastructure for generic
background jobs that aren't tied to a block device. For now, Job only
stores its ID and JobDriver, the rest stays in BlockJob.
The following patches will move over more parts of BlockJob to Job if
they are meaningful outside the context of a block job.
BlockJob.driver is now redundant, but this patch leaves it around to
avoid unnecessary churn. The next patches will get rid of almost all of
its uses anyway so that it can be removed later with much less churn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Wed, 16 May 2018 11:04:34 +0000 (13:04 +0200)]
blockjob: Improve BlockJobInfo.offset/len documentation
Clarify that len is just an estimation of the end value of offset, and
that offset increases monotonically while len can change arbitrarily.
While touching the documentation of offset, move it directly after len
to match the order of the declaration below.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Wed, 16 May 2018 10:55:48 +0000 (12:55 +0200)]
blockjob: Update block-job-pause/resume documentation
Commit
0ec4dfb8d changed block-job_pause/resume so that they return an
error if they don't do anything because the job is already
paused/running. It forgot to update the documentation, so do that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Wed, 23 May 2018 09:56:07 +0000 (11:56 +0200)]
qemu-iotests: Remove MIG_SOCKET from non-migration tests
185 and 191 define a MIG_SOCKET even though they don't do anything with
migration. Remove the useless variable.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Kevin Wolf [Wed, 23 May 2018 09:54:41 +0000 (11:54 +0200)]
qemu-iotests: Add more tests to "migration" group
grep for "migrate" turns up a few test cases which use migration, but
haven't been in the "migration" group so far. Add them to the group.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Peter Maydell [Fri, 18 May 2018 18:17:17 +0000 (19:17 +0100)]
sheepdog: Remove unnecessary NULL check in sd_prealloc()
In commit
8b9ad56e9cbfd852a, we removed the code that could result
in our getting to sd_prealloc()'s out_with_err_set label with a
NULL blk pointer. That makes the NULL check in the error-handling
path unnecessary, and Coverity gripes about it (CID
1390636).
Delete the redundant check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 17 May 2018 16:36:43 +0000 (18:36 +0200)]
qemu-iotests: 086 doesn't work with NFS
The reference output file only works for file. 'qemu-img convert -p'
makes a lot more progress updates for NFS than for file, so disable the
test for NFS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Kevin Wolf [Thu, 17 May 2018 16:33:52 +0000 (18:33 +0200)]
qemu-iotests: Filter NFS paths
NFS paths were only partially filtered in _filter_img_create, _img_info
and _filter_img_info, resulting in "nfs://127.0.0.1TEST_DIR/t.IMGFMT".
This adds another replacement to the sed calls that matches the test
directory not as a host path, but as an NFS URL (the prefix as used for
$TEST_IMG).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Kevin Wolf [Thu, 17 May 2018 15:26:14 +0000 (17:26 +0200)]
qemu-iotests: Fix paths for NFS
Test cases were trying to use nfs:// URLs as local filenames, which made
every test fail for NFS. With TEST_IMG and TEST_IMG_FILE set like for
the other protocols, NFS tests can pass again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tiwei Bie [Thu, 12 Apr 2018 15:12:27 +0000 (23:12 +0800)]
vhost-user: add Net prefix to internal state structure
We are going to introduce a shared vhost user state which
will be named as 'VhostUserState'. So add 'Net' prefix to
the existing internal state structure in the vhost-user
netdev to avoid conflict.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Tue, 20 Mar 2018 21:01:06 +0000 (23:01 +0200)]
linux-headers: add kvm header for mips
kvm header for MIPS was manually excluded from auto-updates.
Update it now to 4.17-rc2.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Tue, 20 Mar 2018 21:01:05 +0000 (23:01 +0200)]
linux-headers: add unistd.h on all arches
This adds unistd.h on ARM64 and MIPS and their dependencies.
Updated to Linux 4.17-rc2.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Tue, 20 Mar 2018 21:01:04 +0000 (23:01 +0200)]
update-linux-headers.sh: unistd.h, kvm consistency
Rework the update script slightly, add the unistd.h header and its
dependencies on all architectures.
This also removes the IA64 and MIPS from a KVM blacklist:
Linux dropped IA64, and there was never a reason to
exclude MIPS from kvm specifically - it was
excluded due to dependency of its unistd.h on sgidefs.h,
which we also import.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Michael S. Tsirkin [Tue, 17 Apr 2018 18:51:25 +0000 (21:51 +0300)]
linux-headers: drop kvm_para.h
Unused now and can be removed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Tue, 17 Apr 2018 18:47:50 +0000 (21:47 +0300)]
x86/cpu: use standard-headers/asm-x86.kvm_para.h
Switch to the header we imported from Linux,
this allows us to drop a hack in kvm_i386.h.
More code will be dropped in the next patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Tue, 17 Apr 2018 18:45:56 +0000 (21:45 +0300)]
include/standard-headers: add asm-x86/kvm_para.h
Import asm-x86/kvm_para.h from linux where it can
be easily used on Linux and non-Linux platforms.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Tue, 17 Apr 2018 18:42:21 +0000 (21:42 +0300)]
update-linux-headers.sh: drop kvm_para.h hacks
It turns out (as will be clear from follow-up patches)
we do not really need any kvm para macros host side
for now, except on x86, and there we need it
unconditionally whether we run on kvm or we don't.
Import the x86 asm/kvm_para.h into standard-headers,
follow-up patches remove a bunch of code using this.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 27 Apr 2018 09:07:24 +0000 (17:07 +0800)]
vhost: add trace for IOTLB miss
Add some trace points for IOTLB translation for vhost. After vhost-user
is setup, the only IO path that QEMU will participate should be the
IOMMU translation, so it'll be good we can track this with explicit
timestamps when needed to see how long time we take to do the
translation, and whether there's anything stuck inside. It might be
useful for triaging vhost-user problems.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Helman [Mon, 19 Mar 2018 22:28:49 +0000 (15:28 -0700)]
virtio-balloon: add hugetlb page allocation counts
qemu should read and report hugetlb page allocation
counts exported in the following kernel patch:
commit
4c3ca37c4a4394978fd0f005625f6064ed2b9a64
Author: Jonathan Helman <jonathan.helman@oracle.com>
Date: Mon Mar 19 11:00:35 2018 -0700
virtio_balloon: export hugetlb page allocation counts
Export the number of successful and failed hugetlb page
allocations via the virtio balloon driver. These 2 counts
come directly from the vm_events HTLB_BUDDY_PGALLOC and
HTLB_BUDDY_PGALLOC_FAIL.
Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Gerd Hoffmann [Tue, 24 Apr 2018 06:38:57 +0000 (08:38 +0200)]
allocate pci id for mdpy
mdpy is a sample pci device for vfio-mdev. Not (yet) merged upstream,
patch available here:
https://www.kraxel.org/cgit/linux/commit/?h=vfio-sample-display&id=
6fd86cff3d7df38ab89625b16fdd6434b1c18749
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>