OSDN Git Service
tangbin [Wed, 11 Mar 2020 02:05:37 +0000 (10:05 +0800)]
ftgmac100: Remove redundant judgement
In this function, ftgmac100_probe() can be triggered only
if the platform_device and platform_driver matches, so the
judgement at the beginning is redundant.
Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 23:28:54 +0000 (16:28 -0700)]
Merge branch 'ethtool-consolidate-irq-coalescing-part-3'
Jakub Kicinski says:
====================
ethtool: consolidate irq coalescing - part 3
Convert more drivers following the groundwork laid in a recent
patch set [1] and continued in [2]. The aim of the effort is to
consolidate irq coalescing parameter validation in the core.
This set converts 15 drivers in drivers/net/ethernet.
3 more conversion sets to come.
None of the drivers here checked all unsupported parameters.
[1] https://lore.kernel.org/netdev/
20200305051542.991898-1-kuba@kernel.org/
[2] https://lore.kernel.org/netdev/
20200306010602.
1620354-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:12 +0000 (19:15 -0700)]
net: gemini: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:11 +0000 (19:15 -0700)]
net: cxgb4vf: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:10 +0000 (19:15 -0700)]
net: cxgb4: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:09 +0000 (19:15 -0700)]
net: cxgb3: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:08 +0000 (19:15 -0700)]
net: cxgb2: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:07 +0000 (19:15 -0700)]
net: mlx4: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:06 +0000 (19:15 -0700)]
net: liquidio: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:05 +0000 (19:15 -0700)]
net: bna: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:04 +0000 (19:15 -0700)]
net: tg3: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:03 +0000 (19:15 -0700)]
net: bcmgenet: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject all unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:02 +0000 (19:15 -0700)]
net: bnx2x: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:01 +0000 (19:15 -0700)]
net: bnx2: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:15:00 +0000 (19:15 -0700)]
net: systemport: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject most of unsupported
parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:14:59 +0000 (19:14 -0700)]
net: aquantia: reject all unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver only rejected some of the unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Mar 2020 02:14:58 +0000 (19:14 -0700)]
net: ena: reject unsupported coalescing params
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Sameeh Jubran <sameehj@amazon.com>
Acked-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 10 Mar 2020 22:15:00 +0000 (23:15 +0100)]
r8169: simplify getting stats by using netdev_stats_to_stats64
Let netdev_stats_to_stats64() do the copy work for us.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 10 Mar 2020 22:14:41 +0000 (23:14 +0100)]
r8169: let rtl8169_mark_to_asic clear rx descriptor field opts2
Clearing opts2 belongs to preparing the descriptor for DMA engine use.
Therefore move it into rtl8169_mark_to_asic().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 23:20:03 +0000 (16:20 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2020-03-10
This series contains updates to ice and iavf drivers.
Cleaned up unnecessary parenthesis, which was pointed out by Sergei
Shtylyov.
Mitch updates the iavf and ice drivers to expand the limitation on the
number of queues that the driver can support to account for the newer
800-series capabilities.
Brett cleans up the error messages for both SR-IOV and non SR-IOV use
cases. Fixed the logic when the ice driver is removed and a bare-metal
VF is passing traffic, which was causing a transmit hang on the VF.
Updated the ice driver to display "Link detected" field via ethtool,
when the driver is in safe mode. Updated ice driver to properly set
VLAN pruning when transmit anti-spoof is off.
Avinash fixed a corner case in DCB, when switching from IEEE to CEE
mode, the DCBX mode does not get properly updated.
Dave updates the logic when switching from software DCB to firmware DCB
to renegotiate DCBX to ensure the firmware agent has up to date
information about the DCB settings of the link partner.
Lukasz increases the PF's mailbox receive queue size to the maximum to
prevent potential bottleneck or slow down occurring from the PF's
mailbox receive queue being full.
Bruce updates the ice driver to use strscpy() instead of strlcpy().
Cleaned up variable names that were not very descriptive with names that
had more meaning.
Anirudh replaces the use of ENOTSUPP with EOPNOTSUPP in the ice driver.
Jake fixed up a function header comment to properly reflect the variable
size and use.
v2: Dropped patch 5 of the original series, where Tony added tunnel
offload support. Based on community feedback, the patch needed
changes, so giving Tony additional time to work on those changes and
not hold up the remaining changes in the series.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Tue, 10 Mar 2020 18:20:50 +0000 (02:20 +0800)]
net: dsa: mt7530: fix macro MIRROR_PORT
The inner pair of parentheses should be around the variable x
Fixes:
37feab6076aa ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
George McCollister [Tue, 10 Mar 2020 17:58:59 +0000 (12:58 -0500)]
net: dsa: microchip: use delayed_work instead of timer + work
Simplify ksz_common.c by using delayed_work instead of a combination of
timer and work.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 23:04:19 +0000 (16:04 -0700)]
Merge branch 'flow_offload-follow-ups-to-HW-stats-type-patchset'
Jiri Pirko says:
====================
flow_offload: follow-ups to HW stats type patchset
This patchset includes couple of patches in reaction to the discussions
to the original HW stats patchset. The first patch is a fix,
the other two patches are basically cosmetics.
====================
Acked-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 10 Mar 2020 15:49:09 +0000 (16:49 +0100)]
flow_offload: restrict driver to pass one allowed bit to flow_action_hw_stats_types_check()
The intention of this helper was to allow driver to specify one type
that it supports, so not only "any" value would pass. So make the API
more strict and allow driver to pass only 1 bit that is going
to be checked.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 10 Mar 2020 15:49:08 +0000 (16:49 +0100)]
flow_offload: turn hw_stats_type into dedicated enum
Put the values into enum and add an enum to define the bits.
Suggested-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 10 Mar 2020 15:49:07 +0000 (16:49 +0100)]
flow_offload: fix allowed types check
Change the check to see if the passed allowed type bit is enabled.
Fixes:
319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 22:48:54 +0000 (15:48 -0700)]
Merge branch 'enetc-Support-extended-BD-rings-at-runtime'
Claudiu Manoil says:
====================
enetc: Support extended BD rings at runtime
First two patches are just misc code cleanup.
The 3rd patch prepares the Rx BD processing code to be extended
to processing both normal and extended BDs.
The last one adds extended Rx BD support for timestamping
without the need of a static config. Finally, the config option
FSL_ENETC_HW_TIMESTAMPING can be dropped.
Care was taken not to impact non-timestamping usecases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Tue, 10 Mar 2020 12:51:24 +0000 (14:51 +0200)]
enetc: Add dynamic allocation of extended Rx BD rings
Hardware timestamping support (PTP) on Rx requires extended
buffer descriptors, double the size of normal Rx descriptors.
On the current controller revision only the timestamping offload
requires extended Rx descriptors.
Since Rx timestamping can be turned on/off at runtime, make Rx ring
allocation configurable at runtime too. As a result, the static
config option FSL_ENETC_HW_TIMESTAMPING can be dropped and the
extended descriptors can be used only when Rx timestamping gets
activated.
The extension has the same size as the base descriptor, making
the descriptor iterators easy to update for the extended case.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Tue, 10 Mar 2020 12:51:23 +0000 (14:51 +0200)]
enetc: Clean up Rx BD iteration
Improve maintainability of the code iterating the Rx buffer
descriptors to prepare it to support iterating extended Rx BD
descriptors as well.
Don't increment by one the h/w descriptor pointers explicitly,
provide an iterator that takes care of the h/w details.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Tue, 10 Mar 2020 12:51:22 +0000 (14:51 +0200)]
enetc: Clean up of ehtool stats len
Refactor the stats len computation code to make it easier
to add new stats counters.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Tue, 10 Mar 2020 12:51:21 +0000 (14:51 +0200)]
enetc: Drop redundant device node check
The existence of the DT port node is the first thing checked
at probe time, and probing won't reach this point if the node
is missing.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Wunner [Tue, 10 Mar 2020 10:49:46 +0000 (11:49 +0100)]
pktgen: Allow on loopback device
When pktgen is used to measure the performance of dev_queue_xmit()
packet handling in the core, it is preferable to not hand down
packets to a low-level Ethernet driver as it would distort the
measurements.
Allow using pktgen on the loopback device, thus constraining
measurements to core code.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 10 Mar 2020 10:11:57 +0000 (11:11 +0100)]
flow_offload: use flow_action_for_each in flow_action_mixed_hw_stats_types_check()
Instead of manually iterating over entries, use flow_action_for_each
helper. Move the helper and wrap it to fit to 80 cols on the way.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 27 Feb 2020 18:15:05 +0000 (10:15 -0800)]
ice: fix incorrect size description of ice_get_nvm_version
The function comment for ice_get_nvm_version indicated that the ver_hi
and ver_lo values were 16 bits. In fact, they are only uint8_t values,
meaning that they have a maximum size of 8 bits. Fix the comment to
match the correct size.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Bruce Allan [Thu, 27 Feb 2020 18:15:04 +0000 (10:15 -0800)]
ice: use variable name more descriptive than type
The variable name 'type' is not very descriptive. Replace instances of
those with a variable name that is more descriptive or replace it if not
needed.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Anirudh Venkataramanan [Thu, 27 Feb 2020 18:15:03 +0000 (10:15 -0800)]
ice: Use EOPNOTSUPP instead of ENOTSUPP
Using ENOTSUPP almost always results in some bizarre error message to
be printed in userspace. This is likely because ENOTSUPP was defined for
the NFS protocol (as per a comment in include/linux/errno.h). Use
EOPNOTSUPP instead.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Thu, 27 Feb 2020 18:15:02 +0000 (10:15 -0800)]
ice: Fix format specifier
Commit
ed5a3f664c55 ("ice: Removing hung_queue variable to use txqueue
function parameter") began utilizing the txqueue variable over the
hung_queue variable. hung_queue was an int where txqueue is an unsigned
int. Update the format specifiers to reflect the new type.
Fixes:
ed5a3f664c55 ("ice: Removing hung_queue variable to use txqueue function parameter")
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Bruce Allan [Thu, 27 Feb 2020 18:15:01 +0000 (10:15 -0800)]
ice: fix use of deprecated strlcpy()
checkpatch complains "CHECK:DEPRECATED_API: Deprecated use of 'strlcpy',
prefer 'stracpy or strscpy' instead"; use strscpy.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Lukasz Czapnik [Thu, 27 Feb 2020 18:15:00 +0000 (10:15 -0800)]
ice: Increase mailbox receive queue length to maximum
Currently the PF's mailbox receive queue is only 512 entries. This fine,
but considering that all VF's mailbox send queues funnel into the PF's
single mailbox receive queue, let's increase it to the maximum size. This
will help prevent any possible bottleneck/slowdown occurring from the PF's
mailbox receive queue being full.
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Thu, 27 Feb 2020 18:14:59 +0000 (10:14 -0800)]
ice: Correct setting VLAN pruning
VLAN pruning is not always being set correctly due to a previous change
that set Tx antispoof off. ice_vsi_is_vlan_pruning_ena() currently checks
for both Tx antispoof and Rx pruning. The expectation for this function is
to only check Rx pruning so fix the check.
Fixes:
cd6d6b83316a ("ice: Fix VF spoofchk")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Dave Ertman [Thu, 27 Feb 2020 18:14:58 +0000 (10:14 -0800)]
ice: renegotiate link after FW DCB on
When switching from SW DCB to FW DCB it is necessary
to renegotiate DCBx so that the FW agent can have up
to date information about the DCB settings of the link
partner.
Perform an autoneg restart on the link when activating
FW DCB.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Avinash JD [Thu, 27 Feb 2020 18:14:57 +0000 (10:14 -0800)]
ice: Fix corner case when switching from IEEE to CEE
While testing DCB for a corner case in which mode is switched from IEEE to
CEE and pfc_ena bitmask unchanged then DCBX mode doesn't get updated.
This is happening because the function ice_dcb_get_mode() is called
in a "no change detected block" instead of "change detected block".
Signed-off-by: Avinash JD <avinash.dayanand@intel.com>
Signed-off-by: Scott Register <scottx.register@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Thu, 27 Feb 2020 18:14:56 +0000 (10:14 -0800)]
ice: Display Link detected via Ethtool in safe mode
Currently the "Link detected" field is not shown when the device goes
into safe mode. This is because the safe mode Ethtool ops does not set the
get_link function. Fix this by setting the safe mode Ethtool op get_link
function.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Thu, 27 Feb 2020 18:14:55 +0000 (10:14 -0800)]
ice: Fix removing driver while bare-metal VFs pass traffic
Currently, if there are bare-metal VFs passing traffic and the ice
driver is removed, there is a possibility of VFs triggering a Tx timeout
right before iavf_remove(). This is causing iavf_close() to not be
called because there is a check in the beginning of iavf_remove() that
bails out early if (adapter->state < IAVF_DOWN_PENDING). This makes it
so some resources do not get cleaned up. Specifically, free_irq()
is never called for data interrupts, which results in the following line
of code to trigger:
pci_disable_msix()
free_msi_irqs()
...
BUG_ON(irq_has_action(entry->irq + i));
...
To prevent the Tx timeout from occurring on the VF during driver unload
for ice and the iavf there are a few changes that are needed.
[1] Don't disable all active VF Tx/Rx queues prior to calling
pci_disable_sriov.
[2] Call ice_free_vfs() before disabling the service task.
[3] Disable VF resets when the ice driver is being unloaded by setting
the pf->state flag __ICE_VF_RESETS_DISABLED.
Changing [1] and [2] allow each VF driver's remove flow to successfully
send VIRTCHNL requests, which includes queue disable. This prevents
unexpected Tx timeouts because the PF driver is no longer forcefully
disabling queues.
Due to [1] and [2] there is a possibility that the PF driver will get a
VFLR or reset request over VIRTCHNL from a VF during PF driver unload.
Prevent that by doing [3].
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Thu, 27 Feb 2020 18:14:53 +0000 (10:14 -0800)]
ice: Improve clarity of prints and variables
Currently when the device runs out of MSI-X interrupts a cryptic and
unhelpful message is printed. This will cause confusion when hitting this
case. Fix this by clearing up the error message for both SR-IOV and non
SR-IOV use cases.
Also, make a few minor changes to increase clarity of variables.
1. Change per VF MSI-X and queue pair variables in the PF structure.
2. Use ICE_NONQ_VECS_VF when determining pf->num_msix_per_vf instead of
the magic number "1". This vector is reserved for the OICR.
All of the resource tracking functions were moved to avoid adding
any forward declaration function prototypes.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Thu, 27 Feb 2020 18:14:52 +0000 (10:14 -0800)]
ice: allow bigger VFs
Unlike the XL710 series, 800-series hardware can allocate more than 4
MSI-X vectors per VF. This patch enables that functionality. We
dynamically allocate vectors and queues depending on how many VFs are
enabled. Allocating the maximum number of VFs replicates XL710
behavior with 4 queues and 4 vectors. But allocating a smaller number
of VFs will give you 16 queues and 16 vectors.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Thu, 27 Feb 2020 18:14:51 +0000 (10:14 -0800)]
iavf: Enable support for up to 16 queues
Previous devices could only allocate 4 MSI-X vectors per VF so there was a
limitation of 4 queues. 800-series hardware can allocate more than 4 MSI-X
vectors, so expand the limitation on the number of queues that the driver
can support to account for these capabilities.
Fix ethtool channel operations to accommodate this change and adjust the
reporting of max number of queues to what is given to us by the PF. Since
we're not requesting queues above this value, just trigger reset to
activate the queues, which we already own.
Finally, fix a test condition that would display an incorrect error
message.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jeff Kirsher [Fri, 21 Feb 2020 22:15:27 +0000 (14:15 -0800)]
ice: Cleanup unneeded parenthesis
Sergei Shtylyov pointed out that two instances of parenthesis are not
needed, so remove them.
Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
David S. Miller [Tue, 10 Mar 2020 03:13:16 +0000 (20:13 -0700)]
Merge branch 'net-Add-support-for-Synopsys-DesignWare-XPCS'
Jose Abreu says:
====================
net: Add support for Synopsys DesignWare XPCS
This adds support for Synopsys DesignWare XPCS in net subsystem and
integrates it into stmmac.
At 1/8, we start by removing the limitation of stmmac selftests that needed
a PHY to pass all the tests.
Then at 2/8 we use some helpers in stmmac so that some code can be
simplified.
At 3/8, we fallback to dev_fwnode() so that PCI based setups wich may
not have CONFIG_OF can still use FW node.
At 4/8, we adapt stmmac to the new PHYLINK changes as suggested by Russell
King.
We proceed by doing changes in PHYLINK in order to support XPCS: At 5/8 we
add some missing speeds that USXGMII supports and at 6/8 we check if
Autoneg is supported after initial parameters are validated.
Support for XPCS is finally introduced at 7/8, along with the usage of it
in stmmac driver at 8/8.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:27 +0000 (09:36 +0100)]
net: stmmac: Integrate it with DesignWare XPCS
Adds all the necessary logic so that stmmac can be used with Synopsys
DesignWare XPCS.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:26 +0000 (09:36 +0100)]
net: phy: Add Synopsys DesignWare XPCS MDIO module
Synopsys DesignWare XPCS is an MMD that can manage link status,
auto-negotiation, link training, ...
In this commit we add basic support for XPCS using USXGMII interface and
Clause 73 Auto-negotiation.
This is highly tied with PHYLINK and can't be used without it. A given
ethernet driver can use the provided callbacks to add the support for
XPCS.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:25 +0000 (09:36 +0100)]
net: phylink: Test if MAC/PCS support Autoneg
We may have cases where MAC or PCS do not support Autoneg. Check if it
is supported after validate callback is called.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:24 +0000 (09:36 +0100)]
net: phylink: Add missing Backplane speeds
USXGMII also supports these missing backplane speeds.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:23 +0000 (09:36 +0100)]
net: stmmac: Use resolved link config in mac_link_up()
Convert the stmmac ethernet driver to use the finalised link parameters
in mac_link_up() rather than the parameters in mac_config().
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:22 +0000 (09:36 +0100)]
net: stmmac: Fallback to dev_fwnode() if needed
When CONFIG_OF is not enabled, of_fwnode_handle() will return NULL, even
though we can have a FW handle from a given device.
Fallback to dev_fwnode() helper if needed.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:21 +0000 (09:36 +0100)]
net: stmmac: Switch to linkmode_and()/linkmode_andnot()
Use the linkmode_and()/linkmode_andnot() helpers to simplify the code.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Mon, 9 Mar 2020 08:36:20 +0000 (09:36 +0100)]
net: stmmac: selftests: Do not fail if PHY is not attached
If a PHY is not attached, we can still run the tests with MAC loopback
mode. Return -EOPNOTSUPP error code in PHY loopback test so that global
status is not a failure.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 02:40:42 +0000 (19:40 -0700)]
Merge tag 'mlx5-updates-2020-03-09' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-03-09
This series provides updates to mlx5 driver:
1) Use vport metadata matching only when mandatory
2) Introduce root flow table and ethtool steering for uplink representors
3) Expose port speed via FW when link modes are not available
3) Misc cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 02:36:13 +0000 (19:36 -0700)]
Merge branch 'hns3-next'
Huazhong Tan says:
====================
net: hns3: misc updates for -net-next
This series includes some misc updates for the HNS3 ethernet driver.
[patch 1] fixes some mixed type operation warning.
[patch 2] renames a macro to make it more readable.
[patch 3 & 4] removes some unnecessary code.
[patch 5] adds check before assert VF reset to prevent some unsuitable
error log.
[patch 6 - 9] some modifications related to printing.
Change log:
V1->V2: fixes a wrong print format in [patch 1] suggested by Jian Shen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Sat, 7 Mar 2020 03:42:50 +0000 (11:42 +0800)]
net: hns3: delete unnecessary logs after kzalloc fails
Since kernel already has logs after kzalloc fails,
it's unnecessary to print duplicate logs. So this
patch deletes these logs.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Sat, 7 Mar 2020 03:42:49 +0000 (11:42 +0800)]
net: hns3: synchronize some print relating to reset issue
This patch modifies some printing relating to reset issue.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Sat, 7 Mar 2020 03:42:48 +0000 (11:42 +0800)]
net: hns3: print out command code when dump fails in debugfs
This patch adds a local variable to save the command code in
some dump cases which need to modify the command code, then
the failing command code can be print out for debugging.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Sat, 7 Mar 2020 03:42:47 +0000 (11:42 +0800)]
net: hns3: print out status register when VF receives unknown source interrupt
When received an unknown vector 0 interrupt, there is not a
helpful information for user to realize that now. So this patch
prints out the value of the status register for this case, and
uses dev_info() instead of dev_dbg() in hclge_check_event_cause().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Sat, 7 Mar 2020 03:42:46 +0000 (11:42 +0800)]
net: hns3: add a check before PF inform VF to reset
When setting VF's MAC from PF, if the VF driver not loaded, the
firmware will return error to PF.
So PF should check whether VF is alive before sending message to
VF when setting VF's MAC.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Sat, 7 Mar 2020 03:42:45 +0000 (11:42 +0800)]
net: hns3: delete some reduandant code
In hclge_add_mc_addr_common() and hclge_rm_mc_addr_common(),
variable req had been set as "0" by memset(), so it's unnecessary
to set .entry_type field as "0" with hnae3_set_bit() again.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Sat, 7 Mar 2020 03:42:44 +0000 (11:42 +0800)]
net: hns3: remove an unnecessary resetting check in hclge_handle_hw_ras_error()
In hclge_handle_hw_ras_error(), it is unnecessary to check
HCLGE_STATE_RST_HANDLING flag, because the reset priority
has been ensured by the process itself.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Sat, 7 Mar 2020 03:42:43 +0000 (11:42 +0800)]
net: hns3: rename macro HCLGE_MAX_NCL_CONFIG_LENGTH
The name of macro HCLGE_MAX_NCL_CONFIG_LENGTH is inaccurate,
this patch renames it to HCLGE_NCL_CONFIG_LENGTH_IN_EACH_CMD.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Sat, 7 Mar 2020 03:42:42 +0000 (11:42 +0800)]
net: hns3: fix some mixed type assignment
This patch cleans up some incorrect type in assignment reported by sparse
and compiler.
The warning as below:
- warning : restricted __le16 degrades to integer
- warning : cast from restricted __le32
- warning : cast from restricted __be32
- warning : cast from restricted __be16
and "mixed operation".
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 02:34:04 +0000 (19:34 -0700)]
Merge branch 'ionic-updates'
Shannon Nelson says:
====================
ionic updates
This is a set of small updates for the Pensando ionic driver, some
from internal work, some a result of mailing list discussions.
v4 - don't register mgmt device netdev
v3 - changed __attribute__(packed)) to __packed
v2 - removed print from ionic_init_module()
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:08 +0000 (17:04 -0800)]
ionic: drop ethtool driver version
Use the default kernel version in ethtool drv_info output
and drop the module version.
Cc: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:07 +0000 (17:04 -0800)]
ionic: add support for device id 0x1004
Add support for the management port device id. This is to
capture the device and set it up for devlink use, but not set
it up for network operations. We still use a netdev object
in order to use the napi infrasucture for processing adminq
and notifyq messages, we just don't register the netdev.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:06 +0000 (17:04 -0800)]
ionic: print pci bus lane info
Print the PCI bus lane information so people can keep an
eye out for poor configurations that might not support
the advertised speed.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:05 +0000 (17:04 -0800)]
ionic: support ethtool rxhash disable
We can disable rxhashing by setting rss_types to 0. The user
can toggle this with "ethtool -K <ethX> rxhash off|on",
which calls into the .ndo_set_features callback with the
NETIF_F_RXHASH feature bit set or cleared. This patch adds
a check for that bit and updates the FW if necessary.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:04 +0000 (17:04 -0800)]
ionic: clean up bitflag usage
Remove the unused flags field and and fix the bitflag names
to include the _F_ flag hint.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:03 +0000 (17:04 -0800)]
ionic: improve irq numa locality
Spreading the interrupts across the CPU cores is good for load
balancing, but not necessarily as good when using a CPU/core
that is not part of the NUMA local CPU. If it can be localized,
the kernel's cpumask_local_spread() service will pick a core
that is on the node close to the PCI device.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:02 +0000 (17:04 -0800)]
ionic: remove pragma packed
Replace the misguided "#pragma packed" with tags on each
struct/union definition that actually needs it. This is safer
and more efficient on the various compilers and architectures.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sat, 7 Mar 2020 01:04:01 +0000 (17:04 -0800)]
ionic: keep ionic dev on lif init fail
If the basic ionic interface works but the lif creation fails,
don't fail the probe. This will allow us to use the driver to
help inspect the hw/fw/pci interface for debugging purposes.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 02:30:08 +0000 (19:30 -0700)]
Merge branch 'mptcp-don-t-auto-adjust-rcvbuf-size-if-locked'
Florian Westphal says:
====================
mptcp: don't auto-adjust rcvbuf size if locked
The mptcp receive buffer is auto-sized based on the subflow receive
buffer. Don't do this if userspace specfied a value via SO_RCVBUF
setsockopt.
Also update selftest program to provide a new option to set a fixed
size.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 6 Mar 2020 20:29:46 +0000 (21:29 +0100)]
mptcp: don't grow mptcp socket receive buffer when rcvbuf is locked
The mptcp rcvbuf size is adjusted according to the subflow rcvbuf size.
This should not be done if userspace did set a fixed value.
Fixes:
600911ff5f72bae ("mptcp: add rmem queue accounting")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 6 Mar 2020 20:29:45 +0000 (21:29 +0100)]
mptcp: selftests: add rcvbuf set option
allows to run the tests with fixed receive buffer by passing
"-R <value>" to mptcp_connect.sh.
While at it, add a default 10 second poll timeout so the "-t"
becomes optional -- this makes mptcp_connect simpler to use
during manual testing.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Fri, 6 Mar 2020 12:35:35 +0000 (20:35 +0800)]
net: dsa: mt7530: add support for port mirroring
Add support for configuring port mirroring through the cls_matchall
classifier. We do a full ingress and/or egress capture towards a
capture port.
MT7530 supports one monitor port and multiple mirrored ports.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 02:14:18 +0000 (19:14 -0700)]
Merge tag 'batadv-next-for-davem-
20200306' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Avoid RCU list-traversal in spinlock, by Sven Eckelmann
- Replace zero-length array with flexible-array member,
by Gustavo A. R. Silva
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 02:07:42 +0000 (19:07 -0700)]
Merge branch 'r8169-series-with-improvements-to-rtl_tx'
Heiner Kallweit says:
====================
r8169: series with improvements to rtl_tx
This series includes few improvements to rtl_tx().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 6 Mar 2020 22:58:50 +0000 (23:58 +0100)]
r8169: remove now unneeded barrier in rtl_tx
Until
ae84bc187337 ("r8169: don't use bit LastFrag in tx descriptor
after send") we used to access another bit in the descriptor, therefore
it seems the barrier was needed. Since this commit DescOwn is the
only bit we're interested in, so the barrier isn't needed any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 6 Mar 2020 22:56:38 +0000 (23:56 +0100)]
r8169: simplify usage of rtl8169_unmap_tx_skb
Simplify the parameters taken by rtl8169_unmap_tx_skb, this makes
usage of this function easier to read and understand.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 6 Mar 2020 22:55:42 +0000 (23:55 +0100)]
r8169: ensure tx_skb is fully reset after calling rtl8169_unmap_tx_skb
So far tx_skb->skb is the only member of the two structs that is not
reset. Make understanding the code easier by resetting both structs
completely in rtl8169_unmap_tx_skb.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 6 Mar 2020 22:54:47 +0000 (23:54 +0100)]
r8169: convert while to for loop in rtl_tx
Slightly improve the code by converting this while to a for loop.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Mar 2020 01:16:06 +0000 (18:16 -0700)]
Merge branch 's390-qeth-next'
Julian Wiedmann says:
====================
s390/qeth: updates 2020-03-06
please apply the following patch series for qeth to netdev's net-next
tree.
Just a small update to take care of a regression wrt to IRQ handling in
net-next, reported by Qian Cai. The fix needs some qdio layer changes,
so you will find Vasily's Acked-by in that patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 6 Mar 2020 08:13:11 +0000 (09:13 +0100)]
s390/qeth: remove VNICC callback parameter struct
After recent cleanups this is just a complicated wrapper around an u32*.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 6 Mar 2020 08:13:10 +0000 (09:13 +0100)]
s390/qdio: add tighter controls for IRQ polling
Once the call to qdio_establish() has completed, qdio is free to deliver
data IRQs to the device driver's IRQ poll handler.
For qeth (the only qdio driver that currently uses IRQ polling) this is
problematic, since the IRQs can arrive before its NAPI instance is
even registered. Calling napi_schedule() from qeth_qdio_start_poll()
then crashes in various nasty ways.
Until recently qeth checked for IFF_UP to drop such early interrupts,
but that's fragile as well since it doesn't enforce any ordering.
Fix this properly by bringing up the qdio device in IRQS_DISABLED mode,
and have the driver explicitly opt-in to receive data IRQs.
qeth does so from qeth_open(), which kick-starts a NAPI poll and then
calls qdio_start_irq() from qeth_poll().
Also add a matching qdio_stop_irq() in qeth_stop() to switch the qdio
dataplane back into a disabled state.
Fixes:
3d35dbe6224e ("s390/qeth: don't check for IFF_UP when scheduling napi")
CC: Qian Cai <cai@lca.pw>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leslie Monis [Mon, 9 Mar 2020 19:10:33 +0000 (00:40 +0530)]
net: sched: pie: change tc_pie_xstats->prob
Commit
105e808c1da2 ("pie: remove pie_vars->accu_prob_overflows")
changes the scale of probability values in PIE from (2^64 - 1) to
(2^56 - 1). This affects the precision of tc_pie_xstats->prob in
user space.
This patch ensures user space is unaffected.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yousuk Seung [Mon, 9 Mar 2020 20:16:40 +0000 (13:16 -0700)]
tcp: add bytes not sent to SCM_TIMESTAMPING_OPT_STATS
Add TCP_NLA_BYTES_NOTSENT to SCM_TIMESTAMPING_OPT_STATS that reports
bytes in the write queue but not sent. This is the same metric as
what is exported with tcp_info.tcpi_notsent_bytes.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Fri, 10 May 2019 17:42:49 +0000 (20:42 +0300)]
net/mlx5e: Show/set Rx network flow classification rules on ul rep
Reuse infrastructure that already exists for pf in legacy mode to show/set
Rx network flow classification rules for uplink representors.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Vlad Buslov [Fri, 10 May 2019 17:19:29 +0000 (20:19 +0300)]
net/mlx5e: Init ethtool steering for representors
During transition to uplink representors the code responsible for
initializing ethtool steering functionality wasn't added to representor
init rx routine. This causes NULL pointer dereference during configuration
of network flow classification rule with ethtool (only possible to
reproduce with next commit in this series which registers necessary ethtool
callbacks).
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Vlad Buslov [Fri, 10 May 2019 12:19:35 +0000 (15:19 +0300)]
net/mlx5e: Show/set Rx flow indir table and RSS hash key on ul rep
Reuse infrastructure that already exists for pf in legacy mode to show/set
Rx flow hash indirection table and RSS hash key for uplink representors.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Saeed Mahameed [Wed, 15 May 2019 09:21:35 +0000 (02:21 -0700)]
net/mlx5e: Introduce root ft concept for representors netdevs
Uplink representor traffic will be redirected to an empty root ft rather
than directly to a direct tir or ttc table, this root ft will be empty and
will be used as a link for auto-chaining with ttc table or ethtool tables
in downstream patches.
On load, fs core will connect uplink rep root_ft with ttc table. In case
ethtool steering will be used, fs core will auto connect root_ft with
the ethtool bypass tables, which will be connected with the ttc table.
vport_rx_rule[uplink_rep]->root_ft->ethtool->ttc.
For non-uplink representors, for simplicity root_ft will always point at
ttc table, hence the replace vport_rx rule logic is removed.
vport_rx_rule[non_uplink_rep]->root_ft(ttc).
For now ethtool steering support can only be available on uplink rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Parav Pandit [Wed, 18 Dec 2019 09:08:38 +0000 (03:08 -0600)]
net/mlx5: E-switch, make query inline mode a static function
mlx5_eswitch_inline_mode_get() is used only in eswitch_offloads.c.
Hence, make it static and adjacent to its caller function.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Paul Blakey [Wed, 8 Jan 2020 12:31:53 +0000 (14:31 +0200)]
net/mlx5: Allocate smaller size tables for ft offload
Instead of giving ft tables one of the largest tables available - 4M,
give it a more reasonable size - 64k. Especially since it will
always be created as a miss hook in the following patch.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Dan Carpenter [Wed, 4 Mar 2020 14:22:24 +0000 (17:22 +0300)]
net/mlx5e: Fix an IS_ERR() vs NULL check
The esw_vport_tbl_get() function returns error pointers on error.
Fixes:
96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eli Cohen [Tue, 18 Feb 2020 09:59:53 +0000 (11:59 +0200)]
net/mlx5: Verify goto chain offload support
According to PRM, forward to flow table along with either packet
reformat or decap is supported only if reformat_and_fwd_to_table
capability is set for the flow table.
Add dependency on the capability and pack all the conditions for "goto
chain" in a single function.
Fix language in error message in case of not supporting forward to a
lower numbered flow table.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>