OSDN Git Service
Omar Sandoval [Wed, 4 Sep 2019 19:13:25 +0000 (12:13 -0700)]
fs: export rw_verify_area()
I'm adding btrfs ioctls to read and write compressed data, and rather
than duplicating the checks in rw_verify_area(), let's just export it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sidong Yang [Fri, 11 Feb 2022 13:48:29 +0000 (13:48 +0000)]
btrfs: qgroup: remove outdated TODO comments
These comments are old, outdated and not very specific. It seems that it
doesn't help to inspire anybody to work on that. So we remove them.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sidong Yang [Sun, 6 Feb 2022 12:52:48 +0000 (12:52 +0000)]
btrfs: qgroup: remove duplicated check in adding qgroup relations
Removes duplicated check when adding qgroup relations.
btrfs_add_qgroup_relations function adds relations by calling
add_relation_rb(). add_relation_rb() checks that member/parentid exists
in current qgroup_tree. But it already checked before calling the
function. It seems that we don't need to double check.
Add new function __add_relation_rb() that adds relations with
qgroup structures and makes old function use the new one. And it makes
btrfs_add_qgroup_relation() function work without double checks by
calling the new function.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Dāvis Mosāns [Wed, 2 Feb 2022 21:44:54 +0000 (23:44 +0200)]
btrfs: add lzo workspace buffer length constants
It makes it more readable for length checking and is be used repeatedly.
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 8 Feb 2022 05:31:19 +0000 (13:31 +0800)]
btrfs: populate extent_map::generation when reading from disk
When btrfs_get_extent() tries to get some file extent from disk, it
never populates extent_map::generation, leaving the value to be 0.
On the other hand, for extent map generated by IO, it will get its
generation properly set at finish_ordered_io()
finish_ordered_io()
|- unpin_extent_cache(gen = trans->transid)
|- em->generation = gen;
[CAUSE]
Since extent_map::generation is mostly used by fsync code, and for fsync
they only care about modified extents, which all have their
em::generation > 0.
Thus it's fine to not populate em read from disk for fsync.
[CORNER CASE]
However autodefrag also relies on em::generation to determine if one
extent needs to be defragged.
This unpopulated extent_map::generation can prevent the following
autodefrag case from working:
mkfs.btrfs -f $dev
mount $dev $mnt -o autodefrag
# initial write to queue the inode for autodefrag
xfs_io -f -c "pwrite 0 4k" $mnt/file
sync
# Real fragmented write
xfs_io -f -s -c "pwrite -b 4096 0 32k" $mnt/file
sync
echo "=== before autodefrag ==="
xfs_io -c "fiemap -v" $mnt/file
# Drop cache to force em to be read from disk
echo 3 > /proc/sys/vm/drop_caches
mount -o remount,commit=1 $mnt
sleep 3
sync
echo "=== After autodefrag ==="
xfs_io -c "fiemap -v" $mnt/file
umount $mnt
The result looks like this:
=== before autodefrag ===
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..15]: 26672..26687 16 0x0
1: [16..31]: 26656..26671 16 0x0
2: [32..47]: 26640..26655 16 0x0
3: [48..63]: 26624..26639 16 0x1
=== After autodefrag ===
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..15]: 26672..26687 16 0x0
1: [16..31]: 26656..26671 16 0x0
2: [32..47]: 26640..26655 16 0x0
3: [48..63]: 26624..26639 16 0x1
This fragmented 32K will not be defragged by autodefrag.
[FIX]
To make things less weird, just populate extent_map::generation when
reading file extents from disk.
This would make above fragmented extents to be properly defragged:
== before autodefrag ===
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..15]: 26672..26687 16 0x0
1: [16..31]: 26656..26671 16 0x0
2: [32..47]: 26640..26655 16 0x0
3: [48..63]: 26624..26639 16 0x1
=== After autodefrag ===
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..63]: 26688..26751 64 0x1
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 15:36:45 +0000 (15:36 +0000)]
btrfs: assert we have a write lock when removing and replacing extent maps
Removing or replacing an extent map requires holding a write lock on the
extent map's tree. We currently do that everywhere, except in one of the
self tests, where it's harmless since there's no concurrency.
In order to catch possible races in the future, assert that we are holding
a write lock on the extent map tree before removing or replacing an extent
map in the tree, and update the self test to obtain a write lock before
removing extent maps.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 15:36:44 +0000 (15:36 +0000)]
btrfs: remove no longer used counter when reading data page
After commit
92082d40976ed0 ("btrfs: integrate page status update for
data read path into begin/end_page_read"), the 'nr' counter at
btrfs_do_readpage() is no longer used, we increment it but we never
read from it. So just remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 15:36:43 +0000 (15:36 +0000)]
btrfs: fix lost error return value when reading a data page
At btrfs_do_readpage(), if we get an error when trying to lookup for an
extent map, we end up marking the page with the error bit, clearing
the uptodate bit on it, and doing everything else that should be done.
However we return success (0) to the caller, when we should return the
error encoded in the extent map pointer. So fix that by returning the
error encoded in the pointer.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 15:36:42 +0000 (15:36 +0000)]
btrfs: stop checking for NULL return from btrfs_get_extent()
At extent_io.c, in the read page and write page code paths, we are testing
if the return value from btrfs_get_extent() can be NULL. However that is
not possible, as btrfs_get_extent() always returns either an error pointer
or a (non-NULL) pointer to an extent map structure.
Everywhere else outside extent_io.c we never check for NULL, we always
treat any returned value as a non-NULL pointer if it does not encode an
error.
So check only for the IS_ERR() case at extent_io.c.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:50 +0000 (14:55 +0000)]
btrfs: prepare extents to be logged before locking a log tree path
When we want to log an extent, in the fast fsync path, we obtain a path
to the leaf that will hold the file extent item either through a deletion
search, via btrfs_drop_extents(), or through an insertion search using
btrfs_insert_empty_item(). After that we fill the file extent item's
fields one by one directly on the leaf.
Instead of doing that, we could prepare the file extent item before
obtaining a btree path, and then copy the prepared extent item with a
single operation once we get the path. This helps avoid some contention
on the log tree, since we are holding write locks for longer than
necessary, especially in the case where the path is obtained via
btrfs_drop_extents() through a deletion search, which always keeps a
write lock on the nodes at levels 1 and 2 (besides the leaf).
This change does that, we prepare the file extent item that is going to
be inserted before acquiring a path, and then copy it into a leaf using
a single copy operation once we get a path.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The following test was run to measure the impact of the whole patchset:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-R free-space-tree -O no-holes"
NUM_JOBS=8
FILE_SIZE=128M
RUN_TIME=200
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=randwrite
fsync=1
fallocate=none
group_reporting=1
direct=0
bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5
ioengine=sync
filesize=$FILE_SIZE
runtime=$RUN_TIME
time_based
directory=$MNT
numjobs=$NUM_JOBS
thread
EOF
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The test ran inside a VM (8 cores, 32G of RAM) with the target disk
mapping to a raw NVMe device, and using a non-debug kernel config
(Debian's default config).
Before the patchset:
WRITE: bw=116MiB/s (122MB/s), 116MiB/s-116MiB/s (122MB/s-122MB/s), io=22.7GiB (24.4GB), run=200013-200013msec
After the patchset:
WRITE: bw=125MiB/s (131MB/s), 125MiB/s-125MiB/s (131MB/s-131MB/s), io=24.3GiB (26.1GB), run=200007-200007msec
A 7.8% gain on throughput and +7.0% more IO done in the same period of
time (200 seconds).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:49 +0000 (14:55 +0000)]
btrfs: remove useless path release in the fast fsync path
There's no point in calling btrfs_release_path() after finishing the loop
that logs the modified extents, since log_one_extent() returns with the
path released. In case the list of extents is empty, the path is already
released, so there's no need for that case as well.
So just remove that unnecessary btrfs_release_path() call.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:48 +0000 (14:55 +0000)]
btrfs: remove constraint on number of visited leaves when replacing extents
At btrfs_drop_extents(), we try to replace a range of file extent items
with a new file extent in a single btree search, to avoid the need to do
a search for deletion, followed by a path release and followed by yet
another search for insertion.
When I originally added that optimization, in commit
1acae57b161ef1
("Btrfs: faster file extent item replace operations"), I left a constraint
to do the fast replace only if we visited a single leaf. That was because
in the most common case we find all file extent items that need to be
deleted (or trimmed) in a single leaf, however it can work for other
common cases like when we need to delete a few file extent items located
at the end of a leaf and a few more located at the beginning of the next
leaf. The key for the new file extent item is greater than the key of
any deleted or trimmed file extent item from previous leaves, so we are
fine to use the last leaf that we found as long as we are holding a
write lock on it - even if the new key ends up at slot 0, as if that's
the case, the btree search has obtained a write lock on any upper nodes
that need to have a key pointer updated.
So removed the constraint that limits the optimization to the case where
we visited only a single leaf.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:47 +0000 (14:55 +0000)]
btrfs: avoid unnecessary computation when deleting items from a leaf
When deleting items from a leaf, we always compute the sum of the data
sizes of the items that are going to be deleted. However we only use
that sum when the last item to delete is behind the last item in the
leaf. This unnecessarily wastes CPU time when we are deleting either
the whole leaf or from some slot > 0 up to the last item in the leaf,
and both of these cases are common (e.g. truncation operation, either
as a result of truncate(2) or when logging inodes, deleting checksums
after removing a large enough extent, etc).
So compute only the sum of the data sizes if the last item to be
deleted does not match the last item in the leaf.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:46 +0000 (14:55 +0000)]
btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
When we delete items from a leaf, if we end up with more than two thirds
of unused leaf space, we try to delete the leaf by moving all its items
into its left and right neighbour leaves. Sometimes that is not possible
because there is not enough free space in the left and right leaves, and
in that case we end up not deleting our leaf.
The way we are doing this is not ideal and can be improved in the
following ways:
1) When we call push_leaf_left(), we pass a value of 1 byte to the data
size parameter of push_leaf_left(). This is not realistic value because
no item can have a size less than 25 bytes, which is the size of struct
btrfs_item. This means that means that if the left leaf has not enough
free space to push any item, we end up COWing it even if we end up not
changing its content at all.
COWing that leaf means allocating a new metadata extent, marking it
dirty and doing more IO when committing a transaction or when syncing a
log tree. For a log tree case, it's particularly more important to
avoid the useless COW operation, as more IO can imply a higher latency
for an fsync operation.
So instead of passing 1 as the minimum data size for push_leaf_left(),
pass the size of the first item in our leaf, as we don't want to COW
the left leaf if we can't at least push the first item of our leaf;
2) When we call push_leaf_right(), we also pass a value of 1 byte as the
data size parameter of push_leaf_right(). Like the previous case, it
will also result in COWing the right leaf even if we are not able to
move any items into it, since there can't be any item with a size
smaller than 25 bytes (the size of struct btrfs_item).
So instead of passing 1 as the minimum data size to push_leaf_right(),
pass a size that corresponds to the sum of the size of all the
remaining items in our leaf. We are not interested in moving less than
that, because if we do, we are not able to delete our leaf and we have
COWed the right leaf for nothing. Plus, moving only some of the items
of our leaf, it means an even less balanced tree.
Just like the previous case, we want to avoid the useless COW of the
right leaf, this way we don't have to spend time allocating one new
metadata extent, and doing more IO when committing a transaction or
syncing a log tree. For the log tree case it's specially more important
because more IO can result in a higher latency for a fsync operation.
So adjust the minimum data size passed to push_leaf_left() and
push_leaf_right() as mentioned above.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
Not being able to delete a leaf that became less than 1/3 full after
deleting items from it is actually common. For example, for the fio test
mentioned in the changelog of patch 6/6, we are only able to delete a
leaf at btrfs_del_items() about 5.3% of the time, due to its left and
right neighbour leaves not having enough free space to push all the
remaining items into them.
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:45 +0000 (14:55 +0000)]
btrfs: remove unnecessary leaf free space checks when pushing items
When trying to push items from a leaf into its left and right neighbours,
we lock the left or right leaf, check if it has the required minimum free
space, COW the leaf and then check again if it has the minimum required
free space. This second check is pointless:
1) Most and foremost because it's not needed. We have a write lock on the
leaf and on its parent node, so no one can come in and change either
the pre-COW or post-COW version of the leaf for the whole duration of
the push_leaf_left() and push_leaf_right() calls;
2) The call to btrfs_leaf_free_space() is not trivial, it has a fair
amount of arithmetic operations and access to fields in the leaf's
header and items, so it's not very cheap.
So remove the duplicated free space checks.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Fri, 4 Feb 2022 12:06:27 +0000 (04:06 -0800)]
btrfs: stop checking for NULL return from btrfs_get_extent_fiemap()
In get_extent_skip_holes() we're checking the return of
btrfs_get_extent_fiemap() for an error pointer or NULL, but
btrfs_get_extent_fiemap() will never return NULL, only error pointers or
a valid extent_map.
The other caller of btrfs_get_extent_fiemap(), find_desired_extent(),
correctly only checks for error-pointers.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pankaj Raghav [Fri, 4 Feb 2022 12:00:22 +0000 (13:00 +0100)]
btrfs: zoned: remove redundant assignment in btrfs_check_zoned_mode
Remove the redundant assignment to zone_info variable in
btrfs_check_zoned_mode function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 1 Feb 2022 14:42:07 +0000 (15:42 +0100)]
btrfs: replace BUILD_BUG_ON by static_assert
The static_assert introduced in
6bab69c65013 ("build_bug.h: add wrapper
for _Static_assert") has been supported by compilers for a long time
(gcc 4.6, clang 3.0) and can be used in header files. We don't need to
put BUILD_BUG_ON to random functions but rather keep it next to the
definition.
The exception here is the UAPI header btrfs_tree.h that could be
potentially included by userspace code and the static assert is not
defined (nor used in any other header).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Wed, 26 Jan 2022 13:46:23 +0000 (05:46 -0800)]
btrfs: zoned: allow DUP on meta-data block groups
Allow creating or reading block-groups on a zoned device with DUP as a
meta-data profile.
This works because we're using the zoned_meta_io_lock and REQ_OP_WRITE
operations for meta-data on zoned btrfs, so all writes to meta-data zones
are aligned to the zone's write-pointer.
Upon loading of the block-group, it is ensured both zones do have the same
zone capacity and write-pointer offsets, so no extra machinery is needed
to keep the write-pointers in sync for the meta-data zones. If this
prerequisite is not met, loading of the block-group is refused.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Wed, 26 Jan 2022 13:46:22 +0000 (05:46 -0800)]
btrfs: zoned: prepare for allowing DUP on zoned
Allow for a block-group to be placed on more than one physical zone.
This is a preparation for allowing DUP profiles for meta-data on a zoned
file-system.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Wed, 26 Jan 2022 13:46:21 +0000 (05:46 -0800)]
btrfs: zoned: make zone finishing multi stripe capable
Currently finishing of a zone only works if the block group isn't
spanning more than one zone.
This limitation is purely artificial and can be easily expanded to block
groups being places across multiple zones.
This is a preparation for allowing DUP and later more complex block-group
profiles on zoned btrfs.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Wed, 26 Jan 2022 13:46:20 +0000 (05:46 -0800)]
btrfs: zoned: make zone activation multi stripe capable
Currently activation of a zone only works if the block group isn't
spanning more than one zone.
This limitation is purely artificial and can be easily expanded to block
groups being places across multiple zones.
This is a preparation for allowing DUP and later more complex block-group
profiles on zoned btrfs.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:08 +0000 (15:40 -0500)]
btrfs: add support for multiple global roots
With extent tree v2 you will be able to create multiple csum, extent,
and free space trees. They will be used based on the block group, which
will now use the block_group_item->chunk_objectid to point to the set of
global roots that it will use. When allocating new block groups we'll
simply mod the gigabyte offset of the block group against the number of
global roots we have and that will be the block groups global id.
>From there we can take the bytenr that we're modifying in the respective
tree, look up the block group and get that block groups corresponding
global root id. From there we can get to the appropriate global root
for that bytenr.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:07 +0000 (15:40 -0500)]
btrfs: add code to support the block group root
This code adds the on disk structures for the block group root, which
will hold the block group items for extent tree v2.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:06 +0000 (15:40 -0500)]
btrfs: abstract out loading the tree root
We're going to be adding more roots that need to be loaded from the
super block, so abstract out the code to read the tree_root from the
super block, and use this helper for the chunk root as well. This will
make it simpler to load the new trees in the future.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:05 +0000 (15:40 -0500)]
btrfs: tree-checker: don't fail on empty extent roots for extent tree v2
For extent tree v2 we can definitely have empty extent roots, so skip
this particular check if we have that set.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:04 +0000 (15:40 -0500)]
btrfs: disable space cache related mount options for extent tree v2
We cannot fall back on the slow caching for extent tree v2, which means
we can't just arbitrarily clear the free space trees at mount time.
Furthermore we can't do v1 space cache with extent tree v2. Simply
ignore these mount options for extent tree v2 as they aren't relevant.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:03 +0000 (15:40 -0500)]
btrfs: disable snapshot creation/deletion for extent tree v2
When we stop tracking metadata blocks all of snapshotting will break, so
disable it until I add the snapshot root and drop tree support.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:02 +0000 (15:40 -0500)]
btrfs: disable scrub for extent-tree-v2
Scrub depends on extent references for every block, and with extent tree
v2 we won't have that, so disable scrub until we can add back the proper
code to handle extent-tree-v2.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:01 +0000 (15:40 -0500)]
btrfs: disable qgroups in extent tree v2
Backref lookups are going to be drastically different with extent tree
v2, disable qgroups until we do the work to add this support for extent
tree v2.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:00 +0000 (15:40 -0500)]
btrfs: disable device manipulation ioctl's EXTENT_TREE_V2
Device add, remove, and replace all require balance, which doesn't work
right now on extent tree v2, so disable these for now.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:39:59 +0000 (15:39 -0500)]
btrfs: disable balance for extent tree v2 for now
With global root id's it makes it problematic to do backref lookups for
balance. This isn't hard to deal with, but future changes are going to
make it impossible to lookup backrefs on any COWonly roots, so go ahead
and disable balance for now on extent tree v2 until we can add balance
support back in future patches.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:39:58 +0000 (15:39 -0500)]
btrfs: add definition for EXTENT_TREE_V2
This adds the initial definition of the EXTENT_TREE_V2 incompat feature
flag. This also hides the support behind CONFIG_BTRFS_DEBUG.
THIS IS A IN DEVELOPMENT FORMAT CHANGE, DO NOT USE UNLESS YOU ARE A
DEVELOPER OR A TESTER.
The format is in flux and will be added in stages, any fs will need to
be re-made between updates to the format.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:11 +0000 (11:00 +0000)]
btrfs: use single variable to track return value at btrfs_log_inode()
At btrfs_log_inode(), we have two variables to track errors and the
return value of the function, named 'ret' and 'err'. In some places we
use 'ret' and if gets a non-zero value we assign its value to 'err'
and then jump to the 'out' label, while in other places we use 'err'
directly without 'ret' as an intermediary. This is inconsistent, error
prone and not necessary. So change that to use only the 'ret' variable,
making this consistent with most functions in btrfs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:10 +0000 (11:00 +0000)]
btrfs: avoid inode logging during rename and link when possible
During a rename or link operation, we need to determine if an inode was
previously logged or not, and if it was, do some update to the logged
inode. We used to rely exclusively on the logged_trans field of struct
btrfs_inode to determine that, but that was not reliable because the
value of that field is not persisted in the inode item, so it's lost
when an inode is evicted and loaded back again. That led to several
issues in the past, such as not persisting deletions (such as the case
fixed by commit
803f0f64d17769 ("Btrfs: fix fsync not persisting dentry
deletions due to inode evictions")), or resulting in losing a file
after an inode eviction followed by a rename (commit
ecc64fab7d49c6
("btrfs: fix lost inode on log replay after mix of fsync, rename and
inode eviction")), besides other issues.
So the inode_logged() helper was introduced and used to determine if an
inode was possibly logged before in the current transaction, with the
caveat that it could return false positives, in the sense that even if an
inode was not logged before in the current transaction, it could still
return true, but never to return false in case the inode was logged.
>From a functional point of view that is fine, but from a performance
perspective it can introduce significant latencies to rename and link
operations, as they will end up doing inode logging even when it is not
necessary.
Recently on a 5.15 kernel, an openSUSE Tumbleweed user reported package
installations and upgrades, with the zypper tool, were often taking a
long time to complete. With strace it could be observed that zypper was
spending about 99% of its time on rename operations, and then with
further analysis we checked that directory logging was happening too
frequently. Taking into account that installation/upgrade of some of the
packages needed a few thousand file renames, the slowdown was very
noticeable for the user.
The issue was caused indirectly due to an excessive number of inode
evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14 or
a 5.16-rc8 kernel. While triggering the inode evictions if something
outside btrfs' control, btrfs could still behave better by eliminating
the false positives from the inode_logged() helper.
So change inode_logged() to actually eliminate such false positives caused
by inode eviction and when an inode was never logged since the filesystem
was mounted, as both cases relate to when the logged_trans field of struct
btrfs_inode has a value of zero. When it can not determine if the inode
was logged based only on the logged_trans value, lookup for the existence
of the inode item in the log tree - if it's there then we known the inode
was logged, if it's not there then it can not have been logged in the
current transaction. Once we determine if the inode was logged, update
the logged_trans value to avoid future calls to have to search in the log
tree again.
Alternatively, we could start storing logged_trans in the on disk inode
item structure (struct btrfs_inode_item) in the unused space it still has,
but that would be a bit odd because:
1) We only care about logged_trans since the filesystem was mounted, we
don't care about its value from a previous mount. Having it persisted
in the inode item structure would not make the best use of the precious
unused space;
2) In order to get logged_trans persisted before inode eviction, we would
have to update the delayed inode when we finish logging the inode and
update its logged_trans in struct btrfs_inode, which makes it a bit
cumbersome since we need to check if the delayed inode exists, if not
create it and populate it and deal with any errors (-ENOMEM mostly).
This change is part of a patchset comprised of the following patches:
1/5 btrfs: add helper to delete a dir entry from a log tree
2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
3/5 btrfs: avoid logging all directory changes during renames
4/5 btrfs: stop doing unnecessary log updates during a rename
5/5 btrfs: avoid inode logging during rename and link when possible
The following test script mimics part of what the zypper tool does during
package installations/upgrades. It does not triggers inode evictions, but
it's similar because it triggers false positives from the inode_logged()
helper, because the inodes have a logged_trans of 0, there's a log tree
due to a fsync of an unrelated file and the directory inode has its
last_trans field set to the current transaction:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Now do some change to an unrelated file and fsync it.
# This is just to create a log tree to make sure that inode_logged()
# does not return false when called against "testdir".
xfs_io -f -c "pwrite 0 4K" -c "fsync" $MNT/foo
# Do some change to testdir. This is to make sure inode_logged()
# will return true when called against "testdir", because its
# logged_trans is 0, it was changed in the current transaction
# and there's a log tree.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
dur=$(( (end - start) /
1000000 ))
echo "Renames took $dur milliseconds"
umount $MNT
Testing this change on a box using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before patchset: 27837 ms
NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9236 ms (-66.8%)
NUM_FILES=10000, after whole patchset applied: 8902 ms (-68.0%)
NUM_FILES=5000, before patchset: 9127 ms
NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4640 ms (-49.2%)
NUM_FILES=5000, after whole patchset applied: 4441 ms (-51.3%)
NUM_FILES=2000, before patchset: 2528 ms
NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1983 ms (-21.6%)
NUM_FILES=2000, after whole patchset applied: 1747 ms (-30.9%)
NUM_FILES=1000, before patchset: 1085 ms
NUM_FILES=1000, after patches 1/5 to 4/5 applied: 893 ms (-17.7%)
NUM_FILES=1000, after whole patchset applied: 867 ms (-20.1%)
Running dbench on the same physical machine with the following script:
$ cat run-dbench.sh
#!/bin/bash
NUM_JOBS=$(nproc --all)
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-O no-holes -R free-space-tree"
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 120 $NUM_JOBS
umount $MNT
Before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX
3761352 0.032 143.843
Close
2762770 0.002 2.273
Rename 159304 0.291 67.037
Unlink 759784 0.207 143.998
Deltree 72 4.028 15.977
Mkdir 36 0.003 0.006
Qpathinfo
3409780 0.013 9.678
Qfileinfo 596772 0.001 0.878
Qfsinfo 625189 0.003 1.245
Sfileinfo 306443 0.006 1.840
Find
1318106 0.063 19.798
WriteX
1871137 0.021 8.532
ReadX
5897325 0.003 3.567
LockX 12252 0.003 0.258
UnlockX 12252 0.002 0.100
Flush 263666 3.327 155.632
Throughput 980.047 MB/sec 12 clients 12 procs max_latency=155.636 ms
After whole patchset applied:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX
4195584 0.033 107.742
Close
3081932 0.002 1.935
Rename 177641 0.218 14.905
Unlink 847333 0.166 107.822
Deltree 118 5.315 15.247
Mkdir 59 0.004 0.048
Qpathinfo
3802612 0.014 10.302
Qfileinfo 666748 0.001 1.034
Qfsinfo 697329 0.003 0.944
Sfileinfo 341712 0.006 2.099
Find
1470365 0.065 9.359
WriteX
2093921 0.021 8.087
ReadX
6576234 0.003 3.407
LockX 13660 0.003 0.308
UnlockX 13660 0.002 0.114
Flush 294090 2.906 115.539
Throughput 1093.11 MB/sec 12 clients 12 procs max_latency=115.544 ms
+11.5% throughput -25.8% max latency rename max latency -77.8%
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:09 +0000 (11:00 +0000)]
btrfs: stop doing unnecessary log updates during a rename
During a rename, we call __btrfs_unlink_inode(), which will call
btrfs_del_inode_ref_in_log() and btrfs_del_dir_entries_in_log(), in order
to remove an inode reference and a directory entry from the log. These
are necessary when __btrfs_unlink_inode() is called from the unlink path,
but not necessary when it's called from a rename context, because:
1) For the btrfs_del_inode_ref_in_log() call, it's pointless to delete the
inode reference related to the old name, because later in the rename
path we call btrfs_log_new_name(), which will drop all inode references
from the log and copy all inode references from the subvolume tree to
the log tree. So we are doing one unnecessary btree operation which
adds additional latency and lock contention in case there are other
tasks accessing the log tree;
2) For the btrfs_del_dir_entries_in_log() call, we are now doing the
equivalent at btrfs_log_new_name() since the previous patch in the
series, that has the subject "btrfs: avoid logging all directory
changes during renames". In fact, having __btrfs_unlink_inode() call
this function not only adds additional latency and lock contention due
to the extra btree operation, but also can make btrfs_log_new_name()
unnecessarily log a range item to track the deletion of the old name,
since it has no way to known that the directory entry related to the
old name was previously logged and already deleted by
__btrfs_unlink_inode() through its call to
btrfs_del_dir_entries_in_log().
So skip those calls at __btrfs_unlink_inode() when we are doing a rename.
Skipping them also allows us now to reduce the duration of time we are
pinning a log transaction during renames, which is always beneficial as
it's not delaying so much other tasks trying to sync the log tree, in
particular we end up not holding the log transaction pinned while adding
the new name (adding inode ref, directory entry, etc).
This change is part of a patchset comprised of the following patches:
1/5 btrfs: add helper to delete a dir entry from a log tree
2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
3/5 btrfs: avoid logging all directory changes during renames
4/5 btrfs: stop doing unnecessary log updates during a rename
5/5 btrfs: avoid inode logging during rename and link when possible
Just like the previous patch in the series, "btrfs: avoid logging all
directory changes during renames", the following script mimics part of
what a package installation/upgrade with zypper does, which is basically
renaming a lot of files, in some directory under /usr, to a name with a
suffix of "-RPMDELETE":
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Do some change to testdir and fsync it.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
xfs_io -c "fsync" $MNT/testdir
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
dur=$(( (end - start) /
1000000 ))
echo "Renames took $dur milliseconds"
umount $MNT
Testing this change on box a using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before patchset: 27399 ms
NUM_FILES=10000, after patches 1/5 to 3/5 applied: 9093 ms (-66.8%)
NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9016 ms (-67.1%)
NUM_FILES=5000, before patchset: 9241 ms
NUM_FILES=5000, after patches 1/5 to 3/5 applied: 4642 ms (-49.8%)
NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4553 ms (-50.7%)
NUM_FILES=2000, before patchset: 2550 ms
NUM_FILES=2000, after patches 1/5 to 3/5 applied: 1788 ms (-29.9%)
NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1767 ms (-30.7%)
NUM_FILES=1000, before patchset: 1088 ms
NUM_FILES=1000, after patches 1/5 to 3/5 applied: 905 ms (-16.9%)
NUM_FILES=1000, after patches 1/5 to 4/5 applied: 883 ms (-18.8%)
The next patch in the series (5/5), also contains dbench results after
applying to whole patchset.
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:08 +0000 (11:00 +0000)]
btrfs: avoid logging all directory changes during renames
When doing a rename of a file, if the file or its old parent directory
were logged before, we log the new name of the file and then make sure
we log the old parent directory, to ensure that after a log replay the
old name of the file is deleted and the new name added.
The logging of the old parent directory can take some time, because it
will scan all leaves modified in the current transaction, check which
directory entries were already logged, copy the ones that were not
logged before, etc. In this rename context all we need to do is make
sure that the old name of the file is deleted on log replay, so instead
of triggering a directory log operation, we can just delete the old
directory entry from the log if it's there, or in case it isn't there,
just log a range item to signal log replay that the old name must be
deleted. So change btrfs_log_new_name() to do that.
This scenario is actually not uncommon to trigger, and recently on a
5.15 kernel, an openSUSE Tumbleweed user reported package installations
and upgrades, with the zypper tool, were often taking a long time to
complete, much more than usual. With strace it could be observed that
zypper was spending over 99% of its time on rename operations, and then
with further analysis we checked that directory logging was happening
too frequently and causing high latencies for the rename operations.
Taking into account that installation/upgrade of some of these packages
needed about a few thousand file renames, the slowdown was very noticeable
for the user.
The issue was caused indirectly due to an excessive number of inode
evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14
or a 5.16-rc8 kernel. After an inode eviction we can't tell for sure,
in an efficient way, if an inode was previously logged in the current
transaction, so we are pessimistic and assume it was, because in case
it was we need to update the logged inode. More details on that in one
of the patches in the same series (subject "btrfs: avoid inode logging
during rename and link when possible"). Either way, in case the parent
directory was logged before, we currently do more work then necessary
during a rename, and this change minimizes that amount of work.
The following script mimics part of what a package installation/upgrade
with zypper does, which is basically renaming a lot of files, in some
directory under /usr, to a name with a suffix of "-RPMDELETE":
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Do some change to testdir and fsync it.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
xfs_io -c "fsync" $MNT/testdir
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
dur=$(( (end - start) /
1000000 ))
echo "Renames took $dur milliseconds"
umount $MNT
Testing this change on box using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before this patch: 27399 ms
NUM_FILES=10000, after this patch: 9093 ms (-66.8%)
NUM_FILES=5000, before this patch: 9241 ms
NUM_FILES=5000, after this patch: 4642 ms (-49.8%)
NUM_FILES=2000, before this patch: 2550 ms
NUM_FILES=2000, after this patch: 1788 ms (-29.9%)
NUM_FILES=1000, before this patch: 1088 ms
NUM_FILES=1000, after this patch: 905 ms (-16.9%)
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:07 +0000 (11:00 +0000)]
btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
In the next patch in the series, there will be the need to access the old
name, and its length, of an inode when logging the inode during a rename.
So instead of passing the inode to btrfs_log_new_name() pass the dentry,
because from the dentry we can get the inode, the name and its length.
This will avoid passing 3 new parameters to btrfs_log_new_name() in the
next patch - the name, its length and an index number. This way we end
up passing only 1 new parameter, the index number.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:06 +0000 (11:00 +0000)]
btrfs: add helper to delete a dir entry from a log tree
Move the code that finds and deletes a logged dir entry out of
btrfs_del_dir_entries_in_log() into a helper function. This new helper
function will be used by another patch in the same series, and serves
to avoid having duplicated logic.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Minghao Chi [Tue, 11 Jan 2022 01:57:16 +0000 (01:57 +0000)]
btrfs: send: remove redundant ret variable in fs_path_copy
Return value from fs_path_add_path() directly instead of taking this in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 13 Jan 2022 15:16:18 +0000 (17:16 +0200)]
btrfs: move QUOTA_ENABLED check to rescan_should_stop from btrfs_qgroup_rescan_worker
Instead of having 2 places that short circuit the qgroup leaf scan have
everything in the qgroup_rescan_leaf function. In addition to that, also
ensure that the inconsistent qgroup flag is set when rescan_should_stop
returns true. This both retains the old behavior when -EINTR was set in
the body of the loop and at the same time also extends this behavior
when scanning is interrupted due to remount or unmount operations.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jiapeng Chong [Fri, 21 Jan 2022 11:42:24 +0000 (19:42 +0800)]
btrfs: scrub: remove redundant initialization of increment
increment is being initialized to map->stripe_len but this is never
read as increment is overwritten later on. Remove the redundant
initialization.
Cleans up the following clang-analyzer warning:
fs/btrfs/scrub.c:3193:6: warning: Value stored to 'increment' during its
initialization is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jiapeng Chong [Fri, 21 Jan 2022 11:43:51 +0000 (19:43 +0800)]
btrfs: zoned: remove redundant initialization of to_add
to_add is being initialized to len but this is never read as to_add is
overwritten later on. Remove the redundant initialization.
Cleans up the following clang-analyzer warning:
fs/btrfs/extent-tree.c:2769:8: warning: Value stored to 'to_add' during
its initialization is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 13 Jan 2022 04:44:10 +0000 (12:44 +0800)]
btrfs: cleanup temporary variables when finding rotational device status
The pointer to struct request_queue is used only to get device type
rotating or the non-rotating. So use it directly.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:06:02 +0000 (13:06 +0800)]
btrfs: use dev_t to match device in device_matched
Commit "btrfs: add device major-minor info in the struct btrfs_device"
saved the device major-minor number in the struct btrfs_device upon
discovering it.
So no need to lookup_bdev() again just match, which means
device_matched() can go away.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:06:01 +0000 (13:06 +0800)]
btrfs: add device major-minor info in the struct btrfs_device
Internally it is common to use the major-minor number to identify a
device and, at a few locations in btrfs, we use the major-minor number
to match the device.
So when we identify a new btrfs device through device add or device
replace or device-scan/ready save the device's major-minor (dev_t) in the
struct btrfs_device so that we don't have to call lookup_bdev() again.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:06:00 +0000 (13:06 +0800)]
btrfs: match stale devices by dev_t
After the commit "btrfs: harden identification of the stale device", we
don't have to match the device path anymore. Instead, we match the dev_t.
So pass in the dev_t instead of the device path, in the call chain
btrfs_forget_devices()->btrfs_free_stale_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:05:59 +0000 (13:05 +0800)]
btrfs: harden identification of a stale device
Identifying and removing the stale device from the fs_uuids list is done
by btrfs_free_stale_devices(). btrfs_free_stale_devices() in turn
depends on device_path_matched() to check if the device appears in more
than one btrfs_device structure.
The matching of the device happens by its path, the device path. However,
when device mapper is in use, the dm device paths are nothing but a link
to the actual block device, which leads to the device_path_matched()
failing to match.
Fix this by matching the dev_t as provided by lookup_bdev() instead of
plain string compare of the device paths.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Mon, 17 Jan 2022 15:50:39 +0000 (23:50 +0800)]
btrfs: simplify fs_devices member access in btrfs_init_dev_replace_tgtdev
In btrfs_init_dev_replace_tgtdev() we dereference fs_info to get
fs_devices many times, instead save a point to the fs_devices.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sahil Kang [Sun, 16 Jan 2022 02:48:47 +0000 (18:48 -0800)]
btrfs: reuse existing inode from btrfs_ioctl
btrfs_ioctl extracts inode from file so we can pass that into the
callbacks.
Signed-off-by: Sahil Kang <sahil.kang@asilaycomputing.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 11 Jan 2022 16:00:26 +0000 (18:00 +0200)]
btrfs: move missing device handling in a dedicate function
This simplifies the code flow in read_one_chunk and makes error handling
when handling missing devices a bit simpler by reducing it to a single
check if something went wrong. No functional changes.
Reviewed-by: Su Yue <l@damenly.su>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 15 Dec 2021 12:20:01 +0000 (12:20 +0000)]
btrfs: stop trying to log subdirectories created in past transactions
When logging a directory we are trying to log subdirectories that were
changed in the current transaction and created in a past transaction.
This type of behaviour was introduced by commit
2f2ff0ee5e4303 ("Btrfs:
fix metadata inconsistencies after directory fsync"), to fix some metadata
inconsistencies that in the meanwhile no longer need this behaviour due to
numerous other changes that happened throughout the years.
This behaviour, besides not needed anymore, it's also undesirable because:
1) It's not reliable because it's only triggered for the directories
of dentries (dir items) that happen to be present on a leaf that
was changed in the current transaction. If a dentry that points to
a directory resides on a leaf that was not changed in the current
transaction, then it's not logged, as at log_dir_items() and
log_new_dir_dentries() we use btrfs_search_forward();
2) It's not required by posix or any standard, it's undefined territory.
The only way to guarantee a subdirectory is logged, it to explicitly
fsync it;
Making the behaviour guaranteed would require scanning all directory
items, check which point to a directory, and then fsync each subdirectory
which was modified in the current transaction. This could be very
expensive for large directories with many subdirectories and/or large
subdirectories.
So remove that obsolete logic.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 15 Dec 2021 12:20:00 +0000 (12:20 +0000)]
btrfs: stop copying old dir items when logging a directory
When logging a directory, we go over every leaf of the subvolume tree that
was changed in the current transaction and copy all its dir index keys to
the log tree.
That includes copying dir index keys created in past transactions. This is
done mostly for simplicity, as after logging the keys we log an item that
specifies the start and end ranges of the keys we logged. That item is
then used during log replay to figure out which keys need to be deleted -
every key in that range that we find in the subvolume tree and is not in
the log tree, needs to be deleted.
Now that we log only dir index keys, and not dir item keys anymore, when
we remove dentries from a directory (due to unlink and rename operations),
we can get entire leaves that we changed only for deleting old dir index
keys, or that have few dir index keys that are new - this is due to the
fact that the offset for new index keys comes from a monotonically
increasing counter.
We can avoid logging dir index keys from past transactions, and in order
to track the deletions, only log range items (BTRFS_DIR_LOG_INDEX_KEY key
type) when we find gaps between consecutive index keys. This massively
reduces the amount of logged metadata when we have deleted directory
entries, even if it's a small percentage of the total number of entries.
The reduction comes from both less items that are logged and instead of
logging many dir index items (struct btrfs_dir_item), which have a size
of 30 bytes plus a file name, we typically log just a few range items
(struct btrfs_dir_log_item), which take only 8 bytes each.
Even if no entries were deleted from a directory and only new entries
were added, we typically still get a reduction on the amount of logged
metadata, because it's very likely the first leaf that got the new
dir index entries also has several old dir index entries.
So change the logging logic to not log dir index keys created in past
transactions and log a range item for every gap it finds between each
pair of consecutive index keys, to ensure deletions are tracked and
replayed on log replay.
This patch is part of a patchset comprised of the following patches:
1/4 btrfs: don't log unnecessary boundary keys when logging directory
2/4 btrfs: put initial index value of a directory in a constant
3/4 btrfs: stop copying old dir items when logging a directory
4/4 btrfs: stop trying to log subdirectories created in past transactions
The following test was run on a branch without this patchset and on a
branch with the first three patches applied:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=
1000000
NUM_FILE_DELETES=10000
MKFS_OPTIONS="-O no-holes -R free-space-tree"
MOUNT_OPTIONS="-o ssd"
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
del_inc=$(( $NUM_FILES / $NUM_FILE_DELETES ))
for ((i = 1; i <= $NUM_FILES; i += $del_inc)); do
rm -f $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) /
1000000 ))
echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"
echo
umount $MNT
The test was run on a non-debug kernel (Debian's default kernel config),
and the results were the following for various values of NUM_FILES and
NUM_FILE_DELETES:
** before, NUM_FILES = 1 000 000, NUM_FILE_DELETES = 10 000 **
dir fsync took 585 ms after deleting 10000 files
** after, NUM_FILES = 1 000 000, NUM_FILE_DELETES = 10 000 **
dir fsync took 34 ms after deleting 10000 files (-94.2%)
** before, NUM_FILES = 100 000, NUM_FILE_DELETES = 1 000 **
dir fsync took 50 ms after deleting 1000 files
** after, NUM_FILES = 100 000, NUM_FILE_DELETES = 1 000 **
dir fsync took 7 ms after deleting 1000 files (-86.0%)
** before, NUM_FILES = 10 000, NUM_FILE_DELETES = 100 **
dir fsync took 9 ms after deleting 100 files
** after, NUM_FILES = 10 000, NUM_FILE_DELETES = 100 **
dir fsync took 5 ms after deleting 100 files (-44.4%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 15 Dec 2021 12:19:59 +0000 (12:19 +0000)]
btrfs: put initial index value of a directory in a constant
At btrfs_set_inode_index_count() we refer twice to the number 2 as the
initial index value for a directory (when it's empty), with a proper
comment explaining the reason for that value. In the next patch I'll
have to use that magic value in the directory logging code, so put
the value in a #define at btrfs_inode.h, to avoid hardcoding the
magic value again at tree-log.c.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 15 Dec 2021 12:19:58 +0000 (12:19 +0000)]
btrfs: don't log unnecessary boundary keys when logging directory
Before we start to log dir index keys from a leaf, we check if there is a
previous index key, which normally is at the end of a leaf that was not
changed in the current transaction. Then we log that key and set the start
of logged range (item of type BTRFS_DIR_LOG_INDEX_KEY) to the offset of
that key. This is to ensure that if there were deleted index keys between
that key and the first key we are going to log, those deletions are
replayed in case we need to replay to the log after a power failure.
However we really don't need to log that previous key, we can just set the
start of the logged range to that key's offset plus 1. This achieves the
same and avoids logging one dir index key.
The same logic is performed when we finish logging the index keys of a
leaf and we find that the next leaf has index keys and was not changed in
the current transaction. We are logging the first key of that next leaf
and use its offset as the end of range we log. This is just to ensure that
if there were deleted index keys between the last index key we logged and
the first key of that next leaf, those index keys are deleted if we end
up replaying the log. However that is not necessary, we can avoid logging
that first index key of the next leaf and instead set the end of the
logged range to match the offset of that index key minus 1.
So avoid logging those index keys at the boundaries and adjust the start
and end offsets of the logged ranges as described above.
This patch is part of a patchset comprised of the following patches:
1/4 btrfs: don't log unnecessary boundary keys when logging directory
2/4 btrfs: put initial index value of a directory in a constant
3/4 btrfs: stop copying old dir items when logging a directory
4/4 btrfs: stop trying to log subdirectories created in past transactions
Performance test results are listed in the changelog of patch 3/4.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sahil Kang [Wed, 5 Jan 2022 08:30:06 +0000 (00:30 -0800)]
btrfs: reuse existing pointers from btrfs_ioctl
btrfs_ioctl already contains pointers to the inode and btrfs_root
structs, so we can pass them into the subfunctions instead of the
toplevel struct file.
Signed-off-by: Sahil Kang <sahil.kang@asilaycomputing.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 4 Jan 2022 12:53:41 +0000 (12:53 +0000)]
btrfs: remove write and wait of struct walk_control
The ->write and ->wait fields of struct walk_control, used for log trees,
are not used since 2008, more specifically since commit
d0c803c4049c5c
("Btrfs: Record dirty pages tree-log pages in an extent_io tree") and
since commit
d0c803c4049c5c ("Btrfs: Record dirty pages tree-log pages in
an extent_io tree"). So just remove them, along with the function
btrfs_write_tree_block(), which is also not used anymore after removing
the ->write member.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 13 Mar 2022 20:23:37 +0000 (13:23 -0700)]
Linux 5.17-rc8
Linus Torvalds [Sun, 13 Mar 2022 17:36:38 +0000 (10:36 -0700)]
Merge tag 'x86_urgent_for_v5.17_rc8' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Free shmem backing storage for SGX enclave pages when those are
swapped back into EPC memory
- Prevent do_int3() from being kprobed, to avoid recursion
- Remap setup_data and setup_indirect structures properly when
accessing their members
- Correct the alternatives patching order for modules too
* tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Free backing memory after faulting the enclave page
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
x86/boot: Fix memremap of setup_indirect structures
x86/module: Fix the paravirt vs alternative order
Linus Torvalds [Sat, 12 Mar 2022 18:29:25 +0000 (10:29 -0800)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix event parser error for hybrid systems
- Fix NULL check against wrong variable in 'perf bench' and in the
parsing code
- Update arm64 KVM headers from the kernel sources
- Sync cpufeatures header with the kernel sources
* tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf parse: Fix event parser error for hybrid systems
perf bench: Fix NULL check against wrong variable
perf parse-events: Fix NULL check against wrong variable
tools headers cpufeatures: Sync with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
Linus Torvalds [Sat, 12 Mar 2022 18:22:43 +0000 (10:22 -0800)]
Merge tag 'drm-fixes-2022-03-12' of git://anongit.freedesktop.org/drm/drm
Pull drm kconfig fix from Dave Airlie:
"Thorsten pointed out this had fallen down the cracks and was in -next
only, I've picked it out, fixed up it's Fixes: line.
- fix regression in Kconfig"
* tag 'drm-fixes-2022-03-12' of git://anongit.freedesktop.org/drm/drm:
drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
Zhengjun Xing [Mon, 7 Mar 2022 15:16:27 +0000 (23:16 +0800)]
perf parse: Fix event parser error for hybrid systems
This bug happened on hybrid systems when both cpu_core and cpu_atom
have the same event name such as "UOPS_RETIRED.MS" while their event
terms are different, then during perf stat, the event for cpu_atom
will parse fail and then no output for cpu_atom.
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/
It is because event terms in the "head" of parse_events_multi_pmu_add
will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS
for cpu_core, then when parsing the same event for cpu_atom, it still
uses the event terms for cpu_core, but event terms for cpu_atom are
different with cpu_core, the event parses for cpu_atom will fail. This
patch fixes it, the event terms should be parsed from the original
event.
This patch can work for the hybrid systems that have the same event
in more than 2 PMUs. It also can work in non-hybrid systems.
Before:
# perf stat -v -e UOPS_RETIRED.MS -a sleep 1
Using CPUID GenuineIntel-6-97-1
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
Control descriptor is not initialized
UOPS_RETIRED.MS:
2737845 16068518485 16068518485
Performance counter stats for 'system wide':
2,737,845 cpu_core/UOPS_RETIRED.MS/
1.
002553850 seconds time elapsed
After:
# perf stat -v -e UOPS_RETIRED.MS -a sleep 1
Using CPUID GenuineIntel-6-97-1
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/
Control descriptor is not initialized
UOPS_RETIRED.MS:
1977555 16076950711 16076950711
UOPS_RETIRED.MS: 568684
8038694234 8038694234
Performance counter stats for 'system wide':
1,977,555 cpu_core/UOPS_RETIRED.MS/
568,684 cpu_atom/UOPS_RETIRED.MS/
1.
004758259 seconds time elapsed
Fixes:
fb0811535e92c6c1 ("perf parse-events: Allow config on kernel PMU events")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220307151627.30049-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Weiguo Li [Fri, 11 Mar 2022 13:07:16 +0000 (21:07 +0800)]
perf bench: Fix NULL check against wrong variable
We did a NULL check after "epollfdp = calloc(...)", but we checked
"epollfd" instead of "epollfdp".
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/tencent_B5D64530EB9C7DBB8D2C88A0C790F1489D0A@qq.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Weiguo Li [Fri, 11 Mar 2022 13:06:57 +0000 (21:06 +0800)]
perf parse-events: Fix NULL check against wrong variable
We did a null check after "tmp->symbol = strdup(...)", but we checked
"list->symbol" other than "tmp->symbol".
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/tencent_DF39269807EC9425E24787E6DB632441A405@qq.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:39:15 +0000 (13:39 -0300)]
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
d45476d983240937 ("x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE")
Its just a comment fixup.
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YiyiHatGaJQM7l/Y@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 15:53:44 +0000 (12:53 -0300)]
tools kvm headers arm64: Update KVM headers from the kernel sources
To pick the changes from:
a5905d6af492ee6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/lkml/YiyhAK6sVPc83FaI@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Zimmermann [Thu, 3 Feb 2022 09:39:22 +0000 (10:39 +0100)]
drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.
arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
`panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
`drm_panel_dp_aux_backlight'
make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1
The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]
v2:
* fix and expand commit description (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
9d6366e743f3 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Fri, 11 Mar 2022 19:49:12 +0000 (11:49 -0800)]
ARM: Spectre-BHB: provide empty stub for non-config
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes:
b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 11 Mar 2022 20:28:21 +0000 (12:28 -0800)]
Merge tag 'riscv-for-linus-5.17-rc8' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- prevent users from enabling the alternatives framework (and thus
errata handling) on XIP kernels, where runtime code patching does not
function correctly.
- properly detect offset overflow for AUIPC-based relocations in
modules. This may manifest as modules calling arbitrary invalid
addresses, depending on the address allocated when a module is
loaded.
* tag 'riscv-for-linus-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix auipc+jalr relocation range checks
riscv: alternative only works on !XIP_KERNEL
Linus Torvalds [Fri, 11 Mar 2022 19:50:36 +0000 (11:50 -0800)]
Merge tag 'powerpc-5.17-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix STACKTRACE=n build, in particular for skiroot_defconfig"
* tag 'powerpc-5.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix STACKTRACE=n build
Russell King (Oracle) [Fri, 11 Mar 2022 17:13:17 +0000 (17:13 +0000)]
ARM: fix Thumb2 regression with Spectre BHB
When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.
Fixes:
b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 11 Mar 2022 19:24:58 +0000 (11:24 -0800)]
Merge tag 'mmc-v5.17-rc6' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Restore (mostly) the busy polling for MMC_SEND_OP_COND
MMC host:
- meson-gx: Fix DMA usage of meson_mmc_post_req()"
* tag 'mmc-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND
mmc: meson: Fix usage of meson_mmc_post_req()
Jarkko Sakkinen [Thu, 3 Mar 2022 22:38:58 +0000 (00:38 +0200)]
x86/sgx: Free backing memory after faulting the enclave page
There is a limited amount of SGX memory (EPC) on each system. When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code. Instead of
swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code. There is a hierarchy like this:
EPC <-> shmem <-> disk
After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed. Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running. The
memory is recovered when the enclave is destroyed and the backing
storage freed.
Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC. In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.
Cc: stable@vger.kernel.org
Fixes:
1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org
Linus Torvalds [Fri, 11 Mar 2022 18:28:32 +0000 (10:28 -0800)]
Merge branch 'davidh' (fixes from David Howells)
Merge misc fixes from David Howells:
"A set of patches for watch_queue filter issues noted by Jann. I've
added in a cleanup patch from Christophe Jaillet to convert to using
formal bitmap specifiers for the note allocation bitmap.
Also two filesystem fixes (afs and cachefiles)"
* emailed patches from David Howells <dhowells@redhat.com>:
cachefiles: Fix volume coherency attribute
afs: Fix potential thrashing in afs writeback
watch_queue: Make comment about setting ->defunct more accurate
watch_queue: Fix lack of barrier/sync/lock between post and read
watch_queue: Free the alloc bitmap when the watch_queue is torn down
watch_queue: Fix the alloc bitmap size to reflect notes allocated
watch_queue: Use the bitmap API when applicable
watch_queue: Fix to always request a pow-of-2 pipe ring size
watch_queue: Fix to release page in ->release()
watch_queue, pipe: Free watchqueue state after clearing pipe ring
watch_queue: Fix filter limit check
David Howells [Fri, 11 Mar 2022 16:02:18 +0000 (16:02 +0000)]
cachefiles: Fix volume coherency attribute
A network filesystem may set coherency data on a volume cookie, and if
given, cachefiles will store this in an xattr on the directory in the
cache corresponding to the volume.
The function that sets the xattr just stores the contents of the volume
coherency buffer directly into the xattr, with nothing added; the
checking function, on the other hand, has a cut'n'paste error whereby it
tries to interpret the xattr contents as would be the xattr on an
ordinary file (using the cachefiles_xattr struct). This results in a
failure to match the coherency data because the buffer ends up being
shifted by 18 bytes.
Fix this by defining a structure specifically for the volume xattr and
making both the setting and checking functions use it.
Since the volume coherency doesn't work if used, take the opportunity to
insert a reserved field for future use, set it to 0 and check that it is
0. Log mismatch through the appropriate tracepoint.
Note that this only affects cifs; 9p, afs, ceph and nfs don't use the
volume coherency data at the moment.
Fixes:
32e150037dce ("fscache, cachefiles: Store the volume coherency data")
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Steve French <smfrench@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 15:58:21 +0000 (15:58 +0000)]
afs: Fix potential thrashing in afs writeback
In afs_writepages_region(), if the dirty page we find is undergoing
writeback or write to cache, but the sync_mode is WB_SYNC_NONE, we go
round the loop trying the same page again and again with no pausing or
waiting unless and until another thread manages to clear the writeback
and fscache flags.
Fix this with three measures:
(1) Advance start to after the page we found.
(2) Break out of the loop and return if rescheduling is requested.
(3) Arbitrarily give up after a maximum of 5 skips.
Fixes:
31143d5d515e ("AFS: implement basic file write support")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/164692725757.2097000.2060513769492301854.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Huafei [Thu, 10 Mar 2022 12:09:15 +0000 (20:09 +0800)]
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.
Fixes:
21e28290b317 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220310120915.63349-1-lihuafei1@huawei.com
David Howells [Fri, 11 Mar 2022 13:24:47 +0000 (13:24 +0000)]
watch_queue: Make comment about setting ->defunct more accurate
watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications. Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.
Remove the "new additions" bit from the comment.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 13:24:36 +0000 (13:24 +0000)]
watch_queue: Fix lack of barrier/sync/lock between post and read
There's nothing to synchronise post_one_notification() versus
pipe_read(). Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.
Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().
If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 13:24:29 +0000 (13:24 +0000)]
watch_queue: Free the alloc bitmap when the watch_queue is torn down
Free the watch_queue note allocation bitmap when the watch_queue is
destroyed.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 13:24:22 +0000 (13:24 +0000)]
watch_queue: Fix the alloc bitmap size to reflect notes allocated
Currently, watch_queue_set_size() sets the number of notes available in
wqueue->nr_notes according to the number of notes allocated, but sets
the size of the bitmap to the unrounded number of notes originally asked
for.
Fix this by setting the bitmap size to the number of notes we're
actually going to make available (ie. the number allocated).
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christophe JAILLET [Fri, 11 Mar 2022 13:24:15 +0000 (13:24 +0000)]
watch_queue: Use the bitmap API when applicable
Use bitmap_alloc() to simplify code, improve the semantic and reduce
some open-coded arithmetic in allocator arguments.
Also change a memset(0xff) into an equivalent bitmap_fill() to keep
consistency.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 13:24:08 +0000 (13:24 +0000)]
watch_queue: Fix to always request a pow-of-2 pipe ring size
The pipe ring size must always be a power of 2 as the head and tail
pointers are masked off by AND'ing with the size of the ring - 1.
watch_queue_set_size(), however, lets you specify any number of notes
between 1 and 511. This number is passed through to pipe_resize_ring()
without checking/forcing its alignment.
Fix this by rounding the number of slots required up to the nearest
power of two. The request is meant to guarantee that at least that many
notifications can be generated before the queue is full, so rounding
down isn't an option, but, alternatively, it may be better to give an
error if we aren't allowed to allocate that much ring space.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 13:23:46 +0000 (13:23 +0000)]
watch_queue: Fix to release page in ->release()
When a pipe ring descriptor points to a notification message, the
refcount on the backing page is incremented by the generic get function,
but the release function, which marks the bitmap, doesn't drop the page
ref.
Fix this by calling generic_pipe_buf_release() at the end of
watch_queue_pipe_buf_release().
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 13:23:38 +0000 (13:23 +0000)]
watch_queue, pipe: Free watchqueue state after clearing pipe ring
In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.
Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared. We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 11 Mar 2022 13:23:31 +0000 (13:23 +0000)]
watch_queue: Fix filter limit check
In watch_queue_set_filter(), there are a couple of places where we check
that the filter type value does not exceed what the type_filter bitmap
can hold. One place calculates the number of bits by:
if (tf[i].type >= sizeof(wfilter->type_filter) * 8)
which is fine, but the second does:
if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)
which is not. This can lead to a couple of out-of-bounds writes due to
a too-large type:
(1) __set_bit() on wfilter->type_filter
(2) Writing more elements in wfilter->filters[] than we allocated.
Fix this by just using the proper WATCH_TYPE__NR instead, which is the
number of types we actually know about.
The bug may cause an oops looking something like:
BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740
Write of size 4 at addr
ffff88800d2c66bc by task watch_queue_oob/611
...
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x150
...
kasan_report.cold+0x7f/0x11b
...
watch_queue_set_filter+0x659/0x740
...
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 611:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
watch_queue_set_filter+0x23a/0x740
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at
ffff88800d2c66a0
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 28 bytes inside of
32-byte region [
ffff88800d2c66a0,
ffff88800d2c66c0)
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 11 Mar 2022 05:15:42 +0000 (21:15 -0800)]
Merge tag 'drm-fixes-2022-03-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected at this stage its pretty quiet, one sun4i mixer fix and
one i915 display flicker fix:
i915:
- fix psr screen flicker
sun4i:
- mixer format fix"
* tag 'drm-fixes-2022-03-11' of git://anongit.freedesktop.org/drm/drm:
drm/sun4i: mixer: Fix P010 and P210 format numbers
drm/i915/psr: Set "SF Partial Frame Enable" also on full update
Emil Renner Berthing [Wed, 23 Feb 2022 19:12:57 +0000 (20:12 +0100)]
riscv: Fix auipc+jalr relocation range checks
RISC-V can do PC-relative jumps with a 32bit range using the following
two instructions:
auipc t0, imm20 ; t0 = PC + imm20 * 2^12
jalr ra, t0, imm12 ; ra = PC + 4, PC = t0 + imm12
Crucially both the 20bit immediate imm20 and the 12bit immediate imm12
are treated as two's-complement signed values. For this reason the
immediates are usually calculated like this:
imm20 = (offset + 0x800) >> 12
imm12 = offset & 0xfff
..where offset is the signed offset from the auipc instruction. When
the 11th bit of offset is 0 the addition of 0x800 doesn't change the top
20 bits and imm12 considered positive. When the 11th bit is 1 the carry
of the addition by 0x800 means imm20 is one higher, but since imm12 is
then considered negative the two's complement representation means it
all cancels out nicely.
However, this addition by 0x800 (2^11) means an offset greater than or
equal to 2^31 - 2^11 would overflow so imm20 is considered negative and
result in a backwards jump. Similarly the lower range of offset is also
moved down by 2^11 and hence the true 32bit range is
[-2^31 - 2^11, 2^31 - 2^11)
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Fixes:
e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Dave Airlie [Fri, 11 Mar 2022 03:26:18 +0000 (13:26 +1000)]
Merge tag 'drm-intel-fixes-2022-03-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix PSR2 when selective fetch is enabled and cursor at (-1, -1) (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YinTFSFg++HvuFpZ@tursulin-mobl2
Dave Airlie [Fri, 11 Mar 2022 00:37:16 +0000 (10:37 +1000)]
Merge tag 'drm-misc-fixes-2022-03-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/sun4i: Fix P010 and P210 format numbers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YipS65Iuu7RMMlAa@linux-uq9g
Linus Torvalds [Fri, 11 Mar 2022 01:23:08 +0000 (17:23 -0800)]
Merge tag 'trace-v5.17-rc6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor tracing fixes:
- Fix unregistering the same event twice. A user could disable the
same event that osnoise will disable on unregistering.
- Inform RCU of a quiescent state in the osnoise testing thread.
- Fix some kerneldoc comments"
* tag 'trace-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix some W=1 warnings in kernel doc comments
tracing/osnoise: Force quiescent states while tracing
tracing/osnoise: Do not unregister events twice
Linus Torvalds [Fri, 11 Mar 2022 00:47:58 +0000 (16:47 -0800)]
Merge tag 'net-5.17-rc8' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work, make
connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available"
* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
ice: Fix race condition during interface enslave
net: phy: meson-gxl: improve link-up behavior
net: bcmgenet: Don't claim WOL when its not available
net: arc_emac: Fix use after free in arc_mdio_probe()
sctp: fix kernel-infoleak for SCTP sockets
net: phy: correct spelling error of media in documentation
net: phy: DP83822: clear MISR2 register to disable interrupts
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
selftests: pmtu.sh: Kill nettest processes launched in subshell.
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
NFC: port100: fix use-after-free in port100_send_complete
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
ax25: Fix NULL pointer dereference in ax25_kill_by_device
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
net: ethernet: lpc_eth: Handle error for clk_enable
...
Sebastian Andrzej Siewior [Wed, 9 Mar 2022 22:13:45 +0000 (23:13 +0100)]
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.
The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.
Skip that connect trace point if xdp_alloc is NULL.
[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
point ]
Fixes:
4a48ef70b93b8 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Thu, 10 Mar 2022 17:16:41 +0000 (18:16 +0100)]
ice: Fix race condition during interface enslave
Commit
5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.
Reproducer:
```
#!/bin/sh
ip link add lag0 type bond mode 1 miimon 100
ip link set lag0
for n in {1..10}; do
echo Cycle: $n
ip link set ens7f0 master lag0
sleep 1
ip link set ens7f0 nomaster
done
```
This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871] __schedule+0x2d1/0x830
[20976.219364] schedule+0x35/0xa0
[20976.222510] schedule_preempt_disabled+0xa/0x10
[20976.227043] __mutex_lock.isra.7+0x310/0x420
[20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079] ib_register_device+0x40d/0x580 [ib_core]
[20976.266139] irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409] irdma_probe+0x2c1/0x360 [irdma]
[20976.285691] auxiliary_bus_probe+0x45/0x70
[20976.289790] really_probe+0x1f2/0x480
[20976.298509] driver_probe_device+0x49/0xc0
[20976.302609] bus_for_each_drv+0x79/0xc0
[20976.306448] __device_attach+0xdc/0x160
[20976.310286] bus_probe_device+0x9d/0xb0
[20976.314128] device_add+0x43c/0x890
[20976.321287] __auxiliary_device_add+0x43/0x60
[20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109] ice_service_task+0xd0c/0xed0 [ice]
[20976.342591] process_one_work+0x1a7/0x360
[20976.350536] worker_thread+0x30/0x390
[20976.358128] kthread+0x10a/0x120
[20976.365547] ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921] __schedule+0x2d1/0x830
[20976.452414] schedule+0x35/0xa0
[20976.455559] schedule_preempt_disabled+0xa/0x10
[20976.460090] __mutex_lock.isra.7+0x310/0x420
[20976.464364] device_del+0x36/0x3c0
[20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288] notifier_call_chain+0x47/0x70
[20976.481386] __netdev_upper_dev_link+0x18b/0x280
[20976.489845] bond_enslave+0xe05/0x1790 [bonding]
[20976.494475] do_setlink+0x336/0xf50
[20976.502517] __rtnl_newlink+0x529/0x8b0
[20976.543441] rtnl_newlink+0x43/0x60
[20976.546934] rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238] netlink_rcv_skb+0x4c/0x120
[20976.563079] netlink_unicast+0x196/0x230
[20976.567005] netlink_sendmsg+0x204/0x3d0
[20976.570930] sock_sendmsg+0x4c/0x50
[20976.574423] ____sys_sendmsg+0x1eb/0x250
[20976.586807] ___sys_sendmsg+0x7c/0xc0
[20976.606353] __sys_sendmsg+0x57/0xa0
[20976.609930] do_syscall_64+0x5b/0x1a0
[20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca
1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
is called from ice_service_task() context, aux device is created
and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
RTNL lock and that notifier calls ice_unplug_aux_dev(). That
function tries to take aux device->lock but this is already taken
by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
taken in step 2
4. Dead-lock
The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
then ice_unplug_aux_dev() is called. If it is set (in other words
plugging of aux device was requested and ice_plug_aux_dev() is
potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
whether it was already cleared by ice_clear_rdma_cap(). If so then
aux device is unplugged.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Wed, 9 Mar 2022 21:04:47 +0000 (22:04 +0100)]
net: phy: meson-gxl: improve link-up behavior
Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.
According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.
Fixes:
84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeremy Linton [Thu, 10 Mar 2022 04:55:35 +0000 (22:55 -0600)]
net: bcmgenet: Don't claim WOL when its not available
Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:
"Supports Wake-on: gsf"
which is false.
Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:
"Supports Wake-on: d"
This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.
Fixes:
c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianglei Nie [Wed, 9 Mar 2022 12:18:24 +0000 (20:18 +0800)]
net: arc_emac: Fix use after free in arc_mdio_probe()
If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
the "bus". But bus->name is still used in the next line, which will lead
to a use after free.
We can fix it by putting the name in a local variable and make the
bus->name point to the rodata section "name",then use the name in the
error message without referring to bus to avoid the uaf.
Fixes:
95b5fc03c189 ("net: arc_emac: Make use of the helper function dev_err_probe()")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 10 Mar 2022 00:11:45 +0000 (16:11 -0800)]
sctp: fix kernel-infoleak for SCTP sockets
syzbot reported a kernel infoleak [1] of 4 bytes.
After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()
Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:154 [inline]
_copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
copy_to_iter include/linux/uio.h:162 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x795/0xa10 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3247 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1158 [inline]
netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
__netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1061
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at
ffff888114f9b000
Data copied to user address
00007f7fe09ff2e0
CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Foster [Wed, 9 Mar 2022 06:25:44 +0000 (22:25 -0800)]
net: phy: correct spelling error of media in documentation
The header file incorrectly referenced "median-independant interface"
instead of media. Correct this typo.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes:
4069a572d423 ("net: phy: Document core PHY structures")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220309062544.3073-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 10 Mar 2022 22:32:32 +0000 (14:32 -0800)]
Merge tag 'mlx5-fixes-2022-03-09' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-03-09
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
====================
Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>