OSDN Git Service
Johannes Schindelin [Wed, 29 Nov 2006 23:24:32 +0000 (00:24 +0100)]
xdl_merge(): fix an off-by-one bug
The line range is i1 .. (i1 + chg1 - 1), not i1 .. (i1 + chg1).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 29 Nov 2006 20:07:37 +0000 (12:07 -0800)]
merge-recursive: use xdl_merge().
This seem to pass the existing tests already.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 29 Nov 2006 20:06:49 +0000 (12:06 -0800)]
xmerge: make return value from xdl_merge() more usable.
The callers would want to know if the resulting merge is clean;
do not discard that information away after calling xdl_do_merge().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Tue, 21 Nov 2006 22:24:34 +0000 (23:24 +0100)]
xdiff: add xdl_merge()
This new function implements the functionality of RCS merge, but
in-memory. It returns < 0 on error, otherwise the number of conflicts.
Finding the conflicting lines can be a very expensive task. You can
control the eagerness of this algorithm:
- a level value of 0 means that all overlapping changes are treated
as conflicts,
- a value of 1 means that if the overlapping changes are identical,
it is not treated as a conflict.
- If you set level to 2, overlapping changes will be analyzed, so that
almost identical changes will not result in huge conflicts. Rather,
only the conflicting lines will be shown inside conflict markers.
With each increasing level, the algorithm gets slower, but more accurate.
Note that the code for level 2 depends on the simple definition of
mmfile_t specific to git, and therefore it will be harder to port that
to LibXDiff.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 3 Dec 2006 01:26:58 +0000 (17:26 -0800)]
Merge branch 'maint'
* maint:
git-svn: avoid fetching files twice in the same revision
Eric Wong [Sun, 3 Dec 2006 00:19:31 +0000 (16:19 -0800)]
git-svn: avoid fetching files twice in the same revision
SVN is not entirely consistent in returning log information and
sometimes returns file information when adding subdirectories,
and sometimes it does not (only returning information about the
directory that was added). This caused git-svn to occasionally
add a file to the list of files to be fetched twice. Now we
change the data structure to be hash to avoid repeated fetches.
As of now (in master), this only affects repositories fetched
without deltas enabled (file://, and when manually overriden
with GIT_SVN_DELTA_FETCH=0); so this bug mainly affects users of
1.4.4.1 and maint.
Thanks to Florian Weimer for reporting this bug.
[jc: backported for maint]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 3 Dec 2006 00:58:30 +0000 (16:58 -0800)]
git-merge: fix confusion between tag and branch
In a repository with core.warnambiguousrefs turned off, and with
a branch and a tag that have the same name 'frotz',
git merge frotz
would merge the commit pointed at by the tag 'frotz' but
incorrectly would identify what was merged as 'branch frotz' in
the merge message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Thu, 30 Nov 2006 10:50:28 +0000 (10:50 +0000)]
De-emphasise the symbolic link documentation.
The fact that git has previously used symbolic links for representing
symbolic refs doesn't seem relevant to the current function of
git-symbolic-ref. This patch makes less of a big deal about the
symbolic link history and instead focuses on what git does now.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andreas Ericsson [Thu, 30 Nov 2006 11:43:13 +0000 (12:43 +0100)]
git-diff: Introduce --index and deprecate --cached.
'git diff --cached' still works, but its use is discouraged
in the documentation. 'git diff --index' does the same thing
and is consistent with how 'git apply --index' works.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andreas Ericsson [Thu, 30 Nov 2006 11:28:28 +0000 (12:28 +0100)]
ls-files: Give hints when errors happen.
Without this patch "git commit file.c file2.c" produces the not
so stellar output:
error: pathspec 'file.c' did not match any.
error: pathspec 'file2.c' did not match any.
With this patch, the output is changed to:
error: pathspec 'file.c' did not match any file(s) known to git.
error: pathspec 'file2.c' did not match any file(s) known to git.
Did you forget to 'git add'?
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicolas Pitre [Wed, 29 Nov 2006 22:15:48 +0000 (17:15 -0500)]
pack-objects: remove redundent status information
The final 'nr_result' and 'written' values must always be the same
otherwise we're in deep trouble. So let's remove a redundent report.
And for paranoia sake let's make sure those two variables are actually
equal after all objects are written (one never knows).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 29 Nov 2006 22:24:51 +0000 (14:24 -0800)]
Merge master.kernel.org:/pub/scm/gitk/gitk
* master.kernel.org:/pub/scm/gitk/gitk:
gitk: Fix enabling/disabling of menu items on Mac OS X
Junio C Hamano [Wed, 29 Nov 2006 20:16:55 +0000 (12:16 -0800)]
Merge branch 'maint'
* branch 'maint':
Document git-repo-config --bool/--int options.
tutorial: talk about user.name early and don't start with commit -a
git-blame: fix rev parameter handling.
Andy Parkins [Wed, 29 Nov 2006 08:25:40 +0000 (08:25 +0000)]
Document git-repo-config --bool/--int options.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 29 Nov 2006 08:17:01 +0000 (00:17 -0800)]
tutorial: talk about user.name early and don't start with commit -a
Introducing yourself to git early would be a good idea; otherwise
the user may not find the mistake until much later when "git log"
is learned.
Teaching "commit -a" without saying that it is a shortcut for
listing the paths to commit leaves the user puzzled. Teach the
form with explicit paths first.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alex Riesen [Wed, 15 Nov 2006 21:52:25 +0000 (22:52 +0100)]
git-blame: fix rev parameter handling.
We lacked "--" termination in the underlying init_revisions() call
which made it impossible to specify a revision that happens to
have the same name as an existing file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 29 Nov 2006 07:07:20 +0000 (23:07 -0800)]
Merge branch 'jc/globfetch'
* jc/globfetch:
fetch-pack: do not barf when duplicate re patterns are given
git-fetch: allow forcing glob pattern in refspec
git-fetch: allow glob pattern in refspec
git-fetch: fix dumb protocol transport to fetch from pack-pruned ref
git-fetch: reuse ls-remote result.
Junio C Hamano [Wed, 29 Nov 2006 06:32:41 +0000 (22:32 -0800)]
Merge branch 'maint'
* maint:
git blame -C: fix output format tweaks when crossing file boundary.
Junio C Hamano [Wed, 29 Nov 2006 06:29:18 +0000 (22:29 -0800)]
git blame -C: fix output format tweaks when crossing file boundary.
We used to get the case that more than two paths came from the
same commit wrong when computing the output width and deciding
to turn on --show-name option automatically. When we find that
lines that came from a path that is different from what we
started digging from, we should always turn --show-name on, and
we should count the name length for all files involved.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Wed, 29 Nov 2006 02:51:42 +0000 (18:51 -0800)]
git-svn: fix multi-init
After the bugfix to connect to repositories where the user has
limited read permissions, multi-init was broken due to our
SVN::Ra connection being limited to working in a subdirectory;
so we now create a new Ra connection for init-ing branches
and another for tags
Along with that fix, allow the user to use the command-line
option flags for multi-init (--revision being the most notable;
but also --no-auth-cache, --config-dir, --username (for passing
to SVN), and --shared/--template for passing to git-init-db
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Wed, 29 Nov 2006 02:51:41 +0000 (18:51 -0800)]
git-svn: documentation updates
Eliminate 'commit' from some places and plug 'dcommit' more.
Also update the section --id (GIT_SVN_ID) usage since we
have multi-init/multi-fetch now.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Wed, 29 Nov 2006 02:51:40 +0000 (18:51 -0800)]
git-svn: color support for the log command
* match LESS environment settings to those in pager.c
* parse diff.color and pager.color settings in the
config file, and pass --color to git-log
* --color and --pager= settings are supported
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Han-Wen Nienhuys [Tue, 28 Nov 2006 10:27:39 +0000 (11:27 +0100)]
ident.c: Trim hint printed when gecos is empty.
Also remove asterisks for readability, and suggest use of
git-config for easy cut & pasting.
Signed-off-by: Han-Wen Nienhuys <hanwen@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Tue, 28 Nov 2006 17:12:26 +0000 (12:12 -0500)]
Fix broken bash completion of local refs.
Commit
35e65ecc broke completion of local refs, e.g. "git pull . fo<tab>"
no longer would complete to "foo". Instead it printed out an internal
git error ("fatal: Not a git repository: '.'").
The break occurred when I tried to improve performance by switching from
git-peek-remote to git-for-each-ref. Apparently git-peek-remote will
drop into directory "$1/.git" (where $1 is its first parameter) if it
is given a repository with a working directory. This allowed the bash
completion code to work properly even though it was not handing over
the true repository directory.
So now we do a stat in bash to see if we need to add "/.git" to the
path string before running any command with --git-dir.
I also tried to optimize away two "git rev-parse --git-dir" invocations
in common cases like "git log fo<tab>" as typically the user is in the
top level directory of their project and therefore the .git subdirectory
is in the current working directory. This should make a difference on
systems where fork+exec might take a little while.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Tue, 28 Nov 2006 17:12:08 +0000 (12:12 -0500)]
Teach bash how to complete long options for git-commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 28 Nov 2006 10:50:17 +0000 (02:50 -0800)]
git-svn: fix output reporting from the delta fetcher
There was nothing printed in the code originally because I left
out a pair of parentheses. Nevertheless, the affected code has
been replaced with a more efficient version that respects the -q
flag as well as requiring less bandwidth.
We save some bandwidth by not requesting changed paths
information when calling get_log() since we're using the delta
fetcher.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 28 Nov 2006 22:06:05 +0000 (14:06 -0800)]
git-svn: error out when the SVN connection fails during a fetch
finish_report does seem to return a useful value indicating success
or failure, so we'll just set a flag when close_edit is called
(it is not called on failures, nor is abort_edit) and check
the flag before proceeding.
Thanks to Pazu for pointing this out.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
René Scharfe [Tue, 28 Nov 2006 21:49:17 +0000 (22:49 +0100)]
shortlog: remove range check
Don't force the user to specify more than one revision parameter,
thus making git-shortlog behave more like git-log.
'git-shortlog master' will now produce the expected results; the
other end of the range simply is the (oldest) root commit.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 28 Nov 2006 05:46:50 +0000 (21:46 -0800)]
git-svn: update tests for recent changes
* Enable test for delta transfers in full-svn-test.
* Run tests against the root of the repository so we won't have
to revisit
308906fa6e98132cab839a4f42701386fba368ef and
efe4631def181d32f932672a7ea31e52ee0ab308 again.
The graft-branches test still runs as before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 28 Nov 2006 05:44:48 +0000 (21:44 -0800)]
git-svn: enable delta transfers during fetches when using SVN:: libs
This should drastically reduce bandwidth used for network
transfers. This is not enabled for file:// repositories by
default because of the increased CPU usage and I/O needed.
GIT_SVN_DELTA_FETCH may be set to a true value to enable or
false (0) to disable delta transfers regardless of the
repository type.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Mon, 27 Nov 2006 23:18:55 +0000 (00:18 +0100)]
sha1_object_info(): be consistent with read_sha1_file()
We used to try loose objects first with sha1_object_info(), but packed
objects first with read_sha1_file(). Now, prefer packed objects over loose
ones with sha1_object_info(), too.
Usually the old behaviour would pose no problem, but when you tried to fix
a fscked up repository by inserting a known-good pack,
git cat-file $(git cat-file -t <sha1>) <sha1>
could fail, even when
git cat-file blob <sha1>
would _not_ fail. Worse, a repack would fail, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Mon, 27 Nov 2006 23:29:21 +0000 (00:29 +0100)]
shortlog: use pager
On request of the kingpenguin, shortlog now uses the pager if output
goes to a tty.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 27 Nov 2006 22:21:30 +0000 (14:21 -0800)]
cvsimport: style fixup.
This should not change any functionality, but just makes it readable by
having a space between syntactic construct keyword and open parenthesis
(e.g. "if (expr", not "if(expr") and between close parenthesis and open
brace (e.g. "if (expr) {" not "if (expr){").
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Mon, 27 Nov 2006 21:20:53 +0000 (13:20 -0800)]
git-svn: use ~/.subversion config files when using SVN:: libraries
This allows users to use HTTP proxy information (among other settings)
from ~/.subversion/servers and ~/.subversion/config
--config-dir (as before) may be passed to git-svn to override the
default choice of '~/.subversion' for the configuration directory.
Thanks to tko on #git for pointing this out.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 20:12:03 +0000 (15:12 -0500)]
Teach bash about git-am/git-apply and their whitespace options.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 20:11:52 +0000 (15:11 -0500)]
Cache the list of merge strategies and available commands during load.
Since the user's git installation is not likely to grow a new command
or merge strategy in the lifespan of the current shell process we can
save time during completion operations by caching these lists during
sourcing of the completion support.
If the git executable is not available or we run into errors while
caching at load time then we defer these to runtime and generate
the list on the fly. This might happen if the user doesn't put git
into their PATH until after the completion script gets sourced.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 20:10:42 +0000 (15:10 -0500)]
Support --strategy=x completion in addition to --strategy x.
Because git-merge and git-rebase both accept -s, --strategy or --strategy=
we should recognize all three formats in the bash completion functions and
issue back all merge strategies on demand.
I also moved the prior word testing to be before the current word testing,
as the current word cannot be completed with -- if the prior word was an
option which requires a parameter, such as -s or --strategy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 09:44:47 +0000 (04:44 -0500)]
Teach bash about git-repo-config.
This is a really ugly completion script for git-repo-config, but it has
some nice properties. I've added all of the documented configuration
parameters from Documentation/config.txt to the script, allowing the
user to complete any standard configuration parameter name.
We also have some intelligence for the remote.*.* and branch.*.* keys
by completing not only the key name (e.g. remote.origin) but also the
values (e.g. remote.*.fetch completes to the branches available on the
corresponding remote).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:42:32 +0000 (03:42 -0500)]
Support bash completion of refs/remote.
Now that people are really likely to start using separate remotes
(due to the default in git-clone changing) we should support ref
completion for these refs in as many commands as possible.
While we are working on this routine we should use for-each-ref
to obtain a list of local refs, as this should run faster than
peek-remote as it does not need to dereference tag objects in
order to produce the list of refs back to us. It should also
be more friendly to users of StGIT as we won't generate a list
of the StGIT metadata refs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:42:18 +0000 (03:42 -0500)]
Teach bash about git log/show/whatchanged options.
Typing out options to git log/show/whatchanged can take a while, but
we can easily complete them with bash. So list the most common ones,
especially --pretty=online|short|medium|... so that users don't need
to type everything out.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:42:07 +0000 (03:42 -0500)]
Teach bash how to complete git-rebase.
As git-rebase is a popular command bash should know how to complete
reference names and its long options. We only support completions
which make sense given the current state of the repository, that
way users don't get shown --continue/--skip/--abort on the first
execution.
Also added support for long option --strategy to git-merge, as I
missed that option earlier and just noticed it while implementing
git-rebase.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:59 +0000 (03:41 -0500)]
Teach bash how to complete git-cherry-pick.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:43 +0000 (03:41 -0500)]
Teach bash how to complete git-format-patch.
Provide completion for currently known long options supported by
git-format-patch as well as the revision list specification argument,
which is generally either a refname or in the form a..b.
Since _git_log was the only code that knew how to complete a..b, but
we want to start adding option support to _git_log also refactor the
a..b completion logic out into its own function.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:28 +0000 (03:41 -0500)]
Add current branch in PS1 support to git-completion.bash.
Many users want to display the current branch name of the current git
repository as part of their PS1 prompt, much as their PS1 prompt might
also display the current working directory name.
We don't force our own PS1 onto the user. Instead we let them craft
their own PS1 string and offer them the function __git_ps1 which they
can invoke to obtain either "" (when not in a git repository) or
"(%s)" where %s is the name of the current branch, as read from HEAD,
with the leading refs/heads/ removed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:12 +0000 (03:41 -0500)]
Teach bash how to complete options for git-name-rev.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:01 +0000 (03:41 -0500)]
Hide plumbing/transport commands from bash completion.
Users generally are not going to need to invoke plumbing-level commands
from within one line shell commands. If they are invoking these commands
then it is likely that they are glueing them together into a shell script
to perform an action, in which case bash completion for these commands is
of relatively little use.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:40:47 +0000 (03:40 -0500)]
Teach git-completion.bash how to complete git-merge.
Now that git-merge is high-level Porcelain users are going to expect
to be able to use it from the command line, in which case we really
should also be able to complete ref names as parameters.
I'm also including completion support for the merge strategies
that are supported by git-merge.sh, should the user wish to use a
different strategy than their default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sean [Mon, 27 Nov 2006 19:37:43 +0000 (14:37 -0500)]
Update documentation to remove incorrect GIT_DIFF_OPTS example.
Git no longer calls an external diff program to generate patches.
Remove the documentation which suggests that you can pass
arbitrary diff options via the GIT_DIFF_OPTS environment variable.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 27 Nov 2006 06:51:38 +0000 (22:51 -0800)]
Merge branch 'js/shortlog'
* js/shortlog:
git-shortlog: make common repository prefix configurable with .mailmap
git-shortlog: fix common repository prefix abbreviation.
builtin git-shortlog is broken
shortlog: fix "-n"
shortlog: handle email addresses case-insensitively
shortlog: read mailmap from ./.mailmap again
shortlog: do not crash on parsing "[PATCH"
Build in shortlog
Junio C Hamano [Mon, 27 Nov 2006 06:51:17 +0000 (22:51 -0800)]
Merge branch 'jc/push-delete-ref'
* jc/push-delete-ref:
Allow git push to delete remote ref.
Junio C Hamano [Mon, 27 Nov 2006 06:19:56 +0000 (22:19 -0800)]
Merge branch 'jc/merge'
* branch 'jc/merge':
git-merge: do not leak rev-parse output used for checking internally.
git-merge: tighten error checking.
merge: allow merging into a yet-to-be-born branch.
git-merge: make it usable as the first class UI
remove merge-recursive-old
Junio C Hamano [Mon, 27 Nov 2006 06:19:42 +0000 (22:19 -0800)]
git-merge: do not leak rev-parse output used for checking internally.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 27 Nov 2006 06:16:31 +0000 (22:16 -0800)]
git-merge: tighten error checking.
If a branch name to be merged is misspelled, the command leaked error
messages from underlying plumbing commands, which were helpful only
to people who know how the command are implemented to diagnose the
breakage, but simply puzzling and unhelpful for the end users.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 27 Nov 2006 06:09:41 +0000 (22:09 -0800)]
Merge branch 'jc/pack-peeled'
* jc/pack-peeled:
Store peeled refs in packed-refs (take 2).
Store peeled refs in packed-refs file.
Junio C Hamano [Sun, 26 Nov 2006 20:47:52 +0000 (12:47 -0800)]
grep: do not skip unmerged entries when grepping in the working tree.
We used to skip unmerged entries, which made sense for grepping
in the cached copies, but not for grepping in the working tree.
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Han-Wen Nienhuys [Sun, 26 Nov 2006 16:42:49 +0000 (17:42 +0100)]
git-tag: allow empty tag message if -m is given explicitly.
Signed-off-by: Han-Wen Nienhuys <hanwen@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 26 Nov 2006 06:54:45 +0000 (22:54 -0800)]
Merge branch 'jn/web'
* jn/web:
gitweb: Make project description in projects list link to summary view
gitweb: Use author_epoch for pubdate in gitweb feeds
gitweb: Add author and contributor email to Atom feed
gitweb: Add author and committer email extraction to parse_commit
gitweb: Use git-show-ref instead of git-peek-remote
gitweb: Do not use esc_html in esc_path
J. Bruce Fields [Sun, 26 Nov 2006 03:45:02 +0000 (22:45 -0500)]
Documentation: clarify tutorial pull/merge discussion
Attempt to clarify somewhat the difference between pull and merge,
and give a little more details on the pull syntax.
I'm still not happy with this section: the explanation of the origin
branch isn't great, but maybe that should be left alone pending the
use-separate-remotes change; and we need to explain how to set up a
public repository and push to it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 26 Nov 2006 01:18:26 +0000 (02:18 +0100)]
gitweb: Make project description in projects list link to summary view
Make (shortened) project description in the "projects list" view
hyperlink to the "summary" view of the project. Project names are
sometimes short; having project description be hyperling gives larger
are to click. While at it, display full description on mouseover via
'title' attribute to introduced link.
Additionally, fix whitespace usage in modified git_project_list_body
subroutine: tabs are for indent, spaces are for align.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sun, 26 Nov 2006 01:38:41 +0000 (17:38 -0800)]
git-svn: allow SVN:: lib users to track the root of the repository (again)
I broke this again in
747fa12cef73b6ca04fffaddaad7326cf546cdea.
Thanks to merlyn for pointing this out to me on IRC.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sat, 25 Nov 2006 14:54:34 +0000 (15:54 +0100)]
gitweb: Use author_epoch for pubdate in gitweb feeds
Use creation date (author_epoch) instead of former commit date
(committer_epoch) as publish date in gitweb feeds (RSS, Atom).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sat, 25 Nov 2006 14:54:33 +0000 (15:54 +0100)]
gitweb: Add author and contributor email to Atom feed
Add author email (from 'author_email') and contributor email (from
'committer_email') to items in the Atom format gitweb feed.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sat, 25 Nov 2006 14:54:32 +0000 (15:54 +0100)]
gitweb: Add author and committer email extraction to parse_commit
Extract author email to 'author_email' key, and comitter mail to
'committer_mail' key; uniquify committer and author lines handling
by the way.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sat, 25 Nov 2006 10:32:08 +0000 (11:32 +0100)]
gitweb: Use git-show-ref instead of git-peek-remote
Use "git show-ref --dereference" instead of "git peek-remote
$projectroot/project" in git_get_references. git-show-ref is faster
than git-peek-remote (40ms vs 56ms user+sys for git.git repository);
even faster is reading info/refs file (if it exists), but the
information in info/refs can be stale; that and the fact that
info/refs is meant for dumb protocol transports, not for gitweb.
git-show-ref is available since v1.4.4; the output format is slightly
different than git-peek-remote output format, but we accept both.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sat, 25 Nov 2006 08:43:59 +0000 (09:43 +0100)]
gitweb: Do not use esc_html in esc_path
Do not use esc_html in esc_path subroutine to avoid double quoting;
expand esc_html body (except quoting) in esc_path.
Move esc_path before quot_cec and quot_upr. Add some comments.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 09:33:06 +0000 (01:33 -0800)]
fetch-pack: do not barf when duplicate re patterns are given
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 09:10:10 +0000 (01:10 -0800)]
git-fetch: allow forcing glob pattern in refspec
Building on top of the earlier refspec glob pattern enhancement,
this allows a glob pattern to say the updates should be forced
by prefixing it with '+' as usual, like this:
Pull: +refs/heads/*:refs/remotes/origin/*
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 09:04:54 +0000 (01:04 -0800)]
Merge branch 'master' into jc/globfetch
This is to pick up the fix made on master:
git-fetch: exit with non-zero status when fast-forward check fails
Junio C Hamano [Sat, 25 Nov 2006 09:04:28 +0000 (01:04 -0800)]
git-fetch: exit with non-zero status when fast-forward check fails
When update_local_ref() refuses to update a branch head due to
fast-forward check, it was not propagated properly in the call
chain and the command did not exit with non-zero status as a
result.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 08:07:54 +0000 (00:07 -0800)]
git-shortlog: make common repository prefix configurable with .mailmap
The code had "/pub/scm/linux/kernel/git/" hardcoded which was
too specific to the kernel project.
With this, a line in the .mailmap file:
# repo-abbrev: /pub/scm/linux/kernel/git/
can be used to cause the substring to be abbreviated to /.../
on the title line of the commit message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 08:01:27 +0000 (00:01 -0800)]
git-shortlog: fix common repository prefix abbreviation.
The code to abbreviate the common repository prefix was totally
borked.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sat, 25 Nov 2006 06:38:18 +0000 (22:38 -0800)]
git-svn: exit with status 1 for test failures
Some versions of the SVN libraries cause die() to exit with 255,
and
40cf043389ef4cdf3e56e7c4268d6f302e387fa0 tightened up
test_expect_failure to reject return values >128.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sat, 25 Nov 2006 06:38:17 +0000 (22:38 -0800)]
git-svn: correctly access repos when only given partial read permissions
Sometimes users are given only read access to a subtree inside a
repository, and git-svn could not read log information (and thus
fetch commits) when connecting a session to the root of the
repository. We now start an SVN::Ra session with the full URL
of what we're tracking, and not the repository root as before.
This change was made much easier with a cleanup of
repo_path_split() usage as well as improving the accounting of
authentication batons.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 07:10:23 +0000 (23:10 -0800)]
git-branch -D: make it work even when on a yet-to-be-born branch
This makes "git branch -D other_branch" work even when HEAD
points at a yet-to-be-born branch.
Earlier, we checked the HEAD ref for the purpose of "subset"
check even when the deletion was forced (i.e. not -d but -D).
Because of this, you cannot delete a branch even with -D while
on a yet-to-be-born branch.
With this change, the following sequence that now works:
mkdir newdir && cd newdir
git init-db
git fetch -k $other_repo refs/heads/master:refs/heads/othre
# oops, typo
git branch other othre
git branch -D othre
Signed-off-by: Junio C Hamano <junkio@cox.net>
Lars Hjemli [Fri, 24 Nov 2006 13:45:10 +0000 (14:45 +0100)]
Add -v and --abbrev options to git-branch
The new -v option makes git-branch show the abbreviated sha1 + subjectline
for each branch.
Additionally, minimum abbreviation length can be specified with
--abbrev=<length>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 03:07:24 +0000 (19:07 -0800)]
git-clone: stop dumb protocol from copying refs outside heads/ and tags/.
Most notably, the original code first copied refs/remotes/ that
remote side had to local, and overwrote them by mapping refs/heads/
from the remote when a dumb protocol transport was used.
This makes the clone behaviour by dumb protocol in line with the
git native and rsync transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 24 Nov 2006 22:04:01 +0000 (14:04 -0800)]
gitweb: (style) use chomp without parentheses consistently.
It seems that gitweb tries to consistently use chomp without parentheses
around its operands, but there were two places that said "chomp($var);".
Let's be consistent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Fri, 24 Nov 2006 21:25:50 +0000 (22:25 +0100)]
gitweb: Replace SPC with also in tag comment
Commit messages had SPC replaced with entity;
make it so also in tag message (tag comment).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 24 Nov 2006 08:26:49 +0000 (00:26 -0800)]
Allow git push to delete remote ref.
This allows you to say
git send-pack $URL :refs/heads/$branch
to delete the named remote branch. The refspec $src:$dst means
replace the destination ref with the object known as $src on the
local side, so this is a natural extension to make an empty $src
mean "No object" to delete the target.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 24 Nov 2006 11:54:57 +0000 (03:54 -0800)]
Merge branch 'jn/web'
* jn/web:
gitweb: Finish restoring "blob" links in git_difftree_body
gitweb: Refactor feed generation, make output prettier, add Atom feed
gitweb: Add an option to href() to return full URL
gitweb: New improved formatting of chunk header in diff
gitweb: Default to $hash_base or HEAD for $hash in "commit" and "commitdiff"
gitweb: Buffer diff header to deal with split patches + git_patchset_body refactoring
gitweb: Protect against possible warning in git_commitdiff
Junio C Hamano [Fri, 24 Nov 2006 11:49:57 +0000 (03:49 -0800)]
Merge branch 'pb/diffroot'
* pb/diffroot:
config option log.showroot to show the diff of root commits
Junio C Hamano [Fri, 24 Nov 2006 11:46:44 +0000 (03:46 -0800)]
Merge branch 'jc/pack-heuristics'
* jc/pack-heuristics:
pack-objects: tweak "do not even attempt delta" heuristics
Junio C Hamano [Fri, 24 Nov 2006 11:46:40 +0000 (03:46 -0800)]
Merge branch 'jc/numstat'
* jc/numstat:
apply --numstat: mark binary diffstat with - -, not 0 0
Junio C Hamano [Fri, 24 Nov 2006 11:43:46 +0000 (03:43 -0800)]
Merge branch 'ap/branch-ref-display'
* ap/branch-ref-display:
Add support to git-branch to show local and remote branches
Junio C Hamano [Fri, 24 Nov 2006 11:42:36 +0000 (03:42 -0800)]
Merge branch 'ap/prune'
* ap/prune:
Typefix builtin-prune.c::prune_object()
Improve git-prune -n output
Junio C Hamano [Fri, 24 Nov 2006 10:54:37 +0000 (02:54 -0800)]
Typefix builtin-prune.c::prune_object()
It passed (const char*) to a function that took a (char *); the
buffer itself was of course writable, so pass the buffer itself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Peter Baumann [Thu, 23 Nov 2006 09:36:33 +0000 (10:36 +0100)]
config option log.showroot to show the diff of root commits
This allows one to see a root commit as a diff in commands like git-log,
git-show and git-whatchanged.
Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 24 Nov 2006 10:34:27 +0000 (02:34 -0800)]
Merge branch 'jc/upload-pack'
* jc/upload-pack:
upload-pack: stop the other side when they have more roots than we do.
Eric Wong [Fri, 24 Nov 2006 09:38:04 +0000 (01:38 -0800)]
git-svn: handle authentication without relying on cached tokens on disk
This is mostly gleaned off SVN::Mirror, with added support for
--no-auth-cache and --config-dir.
Even with this patch, git-svn does not yet support repositories
where the user only has partial read permissions.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Iñaki Arenaza [Wed, 22 Nov 2006 22:26:57 +0000 (23:26 +0100)]
git-cvsimport: add support for CVS pserver method HTTP/1.x proxying
This patch adds support for 'proxy' and 'proxyport' connection options
when using the pserver method for the CVS Root.
It has been tested with a Squid 2.5.x proxy server.
Quoting from the CVS info manual:
The `gserver' and `pserver' connection methods all accept optional
method options, specified as part of the METHOD string, like so:
:METHOD[;OPTION=ARG...]:
Currently, the only two valid connection options are `proxy', which
takes a hostname as an argument, and `proxyport', which takes a port
number as an argument. These options can be used to connect via an HTTP
tunnel style web proxy. For example, to connect pserver via a web proxy
at www.myproxy.net and port 8000, you would use a method of:
:pserver;proxy=www.myproxy.net;proxyport=8000:
*NOTE: The rest of the connection string is required to connect to
the server as noted in the upcoming sections on password authentication,
gserver and kserver. The example above would only modify the METHOD
portion of the repository name.*
PROXY must be supplied to connect to a CVS server via a proxy
server, but PROXYPORT will default to port 8080 if not supplied.
PROXYPORT may also be set via the CVS_PROXY_PORT environment variable.
Signed-off-by: Iñaki Arenaza <iarenuno@eteo.mondragon.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Petr Baudis [Thu, 23 Nov 2006 22:58:35 +0000 (23:58 +0100)]
Make git-clone --use-separate-remote the default
We've talked about this for quite some time on the list, and it
is a sane thing to do for a repository with an associcated
working tree.
For somebody who wants to use the traditional layout, there is a
backward compatibility option --use-immingled-remote, but it is
expected to be removed before the next major release.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 24 Nov 2006 05:52:18 +0000 (21:52 -0800)]
refs outside refs/{heads,tags} match less strongly.
This changes the refname matching logic used to decide which ref
is updated with git-send-pack. We used to error out when
pushing 'master' when the other end has both 'master' branch and
a tracking branch 'remotes/$name/master' but with this, 'master'
matches only 'refs/heads/master' when both and no other 'master'
exist.
Pushing 'foo' when both heads/foo and tags/foo exist at the
remote end is still considered an error and you would need to
disambiguate between them by being more explicit.
When neither heads/foo nor tags/foo exists at the remote,
pushing 'foo' when there is only remotes/origin/foo is not
ambiguous, while it still is ambiguous when there are more than
one such weaker match (remotes/origin/foo and remotes/alt/foo,
for example).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Thu, 23 Nov 2006 10:05:17 +0000 (10:05 +0000)]
Increase length of function name buffer
In xemit.c:xdl_emit_diff() a buffer for showing the function name as
commentary is allocated; this buffer was 40 characters. This is a bit
small; particularly for C++ function names where there is often an
identical prefix (like void LongNamespace::LongClassName) on multiple
functions, which makes the context the same everywhere. In other words
the context is useless. This patch increases that buffer to 80
characters - which may still not be enough, but is better
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 23 Nov 2006 07:15:00 +0000 (23:15 -0800)]
git-fetch: allow glob pattern in refspec
This adds Andy's refspec glob. You can have a single line:
Pull: refs/heads/*:refs/remotes/origin/*
in your ".git/remotes/origin" and say "git fetch" to retrieve
all refs under heads/ at the remote side to remotes/origin/ in
the local repository.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 23 Nov 2006 06:24:09 +0000 (22:24 -0800)]
git-fetch: fix dumb protocol transport to fetch from pack-pruned ref
Earlier, commit walkers downloaded loose refs from refs/ hierarchy
of the remote side to find where to start walking; this would
not work for a repository whose refs are packed and then pruned.
With the previous change, we have ls-remote output from the
remote in-core; we can use the value from there without
requiring loose refs anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 23 Nov 2006 05:57:14 +0000 (21:57 -0800)]
git-fetch: reuse ls-remote result.
This will become necessary to update the dumb protocol
transports to fetch from a repository with packed and then
pruned tags.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Thu, 23 Nov 2006 22:54:05 +0000 (14:54 -0800)]
git-svn: preserve uncommitted changes after dcommit
Using dcommit could cause the user to lose uncommitted changes
during the reset --hard operation, so change it to reset --mixed.
If dcommit chooses the rebase path, then git-rebase will already
error out when local changes are made.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Thu, 23 Nov 2006 22:54:04 +0000 (14:54 -0800)]
git-svn: correctly handle revision 0 in SVN repositories
some SVN repositories have a revision 0 (committed by no author
and no date) when created; so when we need to ensure that we
check any revision variables are defined, and not just
non-zero.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Thu, 23 Nov 2006 22:54:03 +0000 (14:54 -0800)]
git-svn: error out from dcommit on a parent-less commit
dcommit would unconditionally append "~1" to a commit in order
to generate a diff. Now we generate a meaningful error message
if we try to generate an impossible diff.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
René Scharfe [Thu, 23 Nov 2006 22:02:37 +0000 (23:02 +0100)]
archive-zip: don't use sizeof(struct ...)
We can't rely on sizeof(struct zip_*) returning the sum of
all struct members. At least on ARM padding is added at the
end, as Gerrit Pape reported. This fixes the problem but
still lets the compiler do the summing by introducing
explicit padding at the end of the structs and then taking
its offset as the combined size of the preceding members.
As Junio correctly notes, the _end[] marker array's size
must be greater than zero for compatibility with compilers
other than gcc. The space wasted by the markers can safely
be neglected because we only have one instance of each
struct, i.e. in sum 3 wasted bytes on i386, and 0 on ARM. :)
We still rely on the compiler to not add padding between the
struct members, but that's reasonable given that all of them
are unsigned char arrays.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>