HID: chicony: Add support for another ASUS Zen AiO keyboard

[ Upstream commit f2f10b7e722a75c6d75a7f7cd06b0eee3ae20f7c ]

Add support for media keys on the keyboard that comes with the
Asus V221ID and ZN241IC All In One computers.

The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP.

This device is not visibly branded as Chicony, and the USB Vendor ID
suggests that it is a JESS device. However this seems like the right place
to put it: the usage codes are identical to the currently supported
devices, and this driver already supports the ASUS AIO keyboard AK1D.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: altera: Use handle_level_irq when configured as a level_high

[ Upstream commit f759921cfbf4847319d197a6ed7c9534d593f8bc ]

When a threaded irq handler is chained attached to one of the gpio
pins when configure for level irq the altera_gpio_irq_leveL_high_handler
does not mask the interrupt while being handled by the chained irq.
This resulting in the threaded irq not getting enough cycles to complete
quickly enough before the irq was disabled as faulty. handle_level_irq
should be used in this situation instead of handle_simple_irq.

In gpiochip_irqchip_add set default handler to handle_bad_irq as
per Documentation/gpio/driver.txt. Then set the correct handler in
the set_type callback.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rcar: avoid SSI_MODEx settings for SSI8

[ Upstream commit 4b30eebfc35c67771b5f58d9274d3e321b72d7a8 ]

SSI8 is is sharing pin with SSI7, and nothing to do for SSI_MODEx.
It is special pin and it needs special settings whole system,
but we can't confirm it, because we never have SSI8 available board.

This patch fixup SSI_MODEx settings error for SSI8 on connection test,
but should be confirmed behavior on real board in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Release device node after it is no longer needed.

[ Upstream commit b92675d998a9fa37fe9e0e35053a95b4a23c158b ]

The device node returned by of_find_node_by_name() needs to be released
after it is no longer needed to avoid a device node leak.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix device node reference counts

[ Upstream commit 10e5778f54765c96fe0c8f104b7a030e5b35bc72 ]

After commit 0549bde0fcb1 ("of: fix of_node leak caused in
of_find_node_opts_by_path"), the following error may be
reported when running omap images.

OF: ERROR: Bad of_node_put() on /ocp@68000000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1
Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14)
[<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac)
[<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c)
[<c05af1b0>] (kobject_release)
from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94)
[<c0ad1aa4>] (of_find_node_by_name)
from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c)
[<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from
[<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274)
[<c1215d5c>] (omap3xxx_hwmod_init)
from [<c120faa8>] (omap3_init_early+0xa0/0x11c)
[<c120faa8>] (omap3_init_early)
from [<c120fb2c>] (omap3430_init_early+0x8/0x30)
[<c120fb2c>] (omap3430_init_early)
from [<c1204710>] (setup_arch+0xc04/0xc34)
[<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c)
[<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c)

of_find_node_by_name() drops the reference to the passed device node.
The commit referenced above exposes this problem.

To fix the problem, use of_get_child_by_name() instead of
of_find_node_by_name(); of_get_child_by_name() does not drop
the reference count of passed device nodes. While semantically
different, we only look for immediate children of the passed
device node, so of_get_child_by_name() is a more appropriate
function to use anyway.

Release the reference to the device node obtained with
of_get_child_by_name() after it is no longer needed to avoid
another device node leak.

While at it, clean up the code and change the return type of
omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use
and the return type of of_device_is_available().

Cc: Qi Hou <qi.hou@windriver.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64: Fix checksum folding in csum_add()

[ Upstream commit 6ad966d7303b70165228dba1ee8da1a05c10eefe ]

Paul's patch to fix checksum folding, commit b492f7e4e07a ("powerpc/64:
Fix checksum folding in csum_tcpudp_nofold and ip_fast_csum_nofold")
missed a case in csum_add(). Fix it.

Signed-off-by: Shile Zhang <shile.zhang@nokia.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module: set __jump_table alignment to 8

[ Upstream commit ab42632156becd35d3884ee5c14da2bedbf3149a ]

For powerpc the __jump_table section in modules is not aligned, this
causes a WARN_ON() splat when loading a module containing a __jump_table.

Strict alignment became necessary with commit 3821fd35b58d
("jump_label: Reduce the size of struct static_key"), currently in
linux-next, which uses the two least significant bits of pointers to
__jump_table elements.

Fix by forcing __jump_table to 8, which is the same alignment used for
this section in the kernel proper.

Link: http://lkml.kernel.org/r/20170301220453.4756-1-david.daney@cavium.com
Reviewed-by: Jason Baron <jbaron@akamai.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lirc: fix dead lock between open and wakeup_filter

[ Upstream commit db5b15b74ed9a5c04bb808d18ffa2c773f5c18c0 ]

The locking in lirc needs improvement, but for now just fix this potential
deadlock.

======================================================
[ INFO: possible circular locking dependency detected ]
4.10.0-rc1+ #1 Not tainted
-------------------------------------------------------
bash/2502 is trying to acquire lock:
 (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffc06f6a5e>] ir_raw_encode_scancode+0x3e/0xb0 [rc_core]

               but task is already holding lock:
 (&dev->lock){+.+.+.}, at: [<ffffffffc06f511f>] store_filter+0x9f/0x240 [rc_core]

               which lock already depends on the new lock.

               the existing dependency chain (in reverse order) is:

               -> #2 (&dev->lock){+.+.+.}:

[<ffffffffa110adad>] lock_acquire+0xfd/0x200
[<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0
[<ffffffffc06f436a>] rc_open+0x2a/0x80 [rc_core]
[<ffffffffc07114ca>] lirc_dev_fop_open+0xda/0x1e0 [lirc_dev]
[<ffffffffa12975e0>] chrdev_open+0xb0/0x210
[<ffffffffa128eb5a>] do_dentry_open+0x20a/0x2f0
[<ffffffffa128ffcc>] vfs_open+0x4c/0x80
[<ffffffffa12a35ec>] path_openat+0x5bc/0xc00
[<ffffffffa12a5271>] do_filp_open+0x91/0x100
[<ffffffffa12903f0>] do_sys_open+0x130/0x220
[<ffffffffa12904fe>] SyS_open+0x1e/0x20
[<ffffffffa19278c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2
               -> #1 (lirc_dev_lock){+.+.+.}:
[<ffffffffa110adad>] lock_acquire+0xfd/0x200
[<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0
[<ffffffffc0711f47>] lirc_register_driver+0x67/0x59b [lirc_dev]
[<ffffffffc06db7f4>] ir_lirc_register+0x1f4/0x260 [ir_lirc_codec]
[<ffffffffc06f6cac>] ir_raw_handler_register+0x7c/0xb0 [rc_core]
[<ffffffffc0398010>] 0xffffffffc0398010
[<ffffffffa1002192>] do_one_initcall+0x52/0x1b0
[<ffffffffa11ef5c8>] do_init_module+0x5f/0x1fa
[<ffffffffa11566b5>] load_module+0x2675/0x2b00
[<ffffffffa1156dcf>] SYSC_finit_module+0xdf/0x110
[<ffffffffa1156e1e>] SyS_finit_module+0xe/0x10
[<ffffffffa1003f5c>] do_syscall_64+0x6c/0x1f0
[<ffffffffa1927989>] return_from_SYSCALL_64+0x0/0x7a
               -> #0 (ir_raw_handler_lock){+.+.+.}:
[<ffffffffa110a7b7>] __lock_acquire+0x10f7/0x1290
[<ffffffffa110adad>] lock_acquire+0xfd/0x200
[<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0
[<ffffffffc06f6a5e>] ir_raw_encode_scancode+0x3e/0xb0 [rc_core]
[<ffffffffc0b0f492>] loop_set_wakeup_filter+0x62/0xbd [rc_loopback]
[<ffffffffc06f522a>] store_filter+0x1aa/0x240 [rc_core]
[<ffffffffa15e46f8>] dev_attr_store+0x18/0x30
[<ffffffffa13318e5>] sysfs_kf_write+0x45/0x60
[<ffffffffa1330b55>] kernfs_fop_write+0x155/0x1e0
[<ffffffffa1290797>] __vfs_write+0x37/0x160
[<ffffffffa12921f8>] vfs_write+0xc8/0x1e0
[<ffffffffa12936e8>] SyS_write+0x58/0xc0
[<ffffffffa19278c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2

               other info that might help us debug this:

Chain exists of:
                 ir_raw_handler_lock --> lirc_dev_lock --> &dev->lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&dev->lock);
                               lock(lirc_dev_lock);
                               lock(&dev->lock);
  lock(ir_raw_handler_lock);

                *** DEADLOCK ***

4 locks held by bash/2502:
 #0:  (sb_writers#4){.+.+.+}, at: [<ffffffffa12922c5>] vfs_write+0x195/0x1e0
 #1:  (&of->mutex){+.+.+.}, at: [<ffffffffa1330b1f>] kernfs_fop_write+0x11f/0x1e0
 #2:  (s_active#215){.+.+.+}, at: [<ffffffffa1330b28>] kernfs_fop_write+0x128/0x1e0
 #3:  (&dev->lock){+.+.+.}, at: [<ffffffffc06f511f>] store_filter+0x9f/0x240 [rc_core]

               stack backtrace:
CPU: 3 PID: 2502 Comm: bash Not tainted 4.10.0-rc1+ #1
Hardware name:                  /DG45ID, BIOS IDG4510H.86A.0135.2011.0225.1100 02/25/2011
Call Trace:
 dump_stack+0x86/0xc3
 print_circular_bug+0x1be/0x210
 __lock_acquire+0x10f7/0x1290
 lock_acquire+0xfd/0x200
 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core]
 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core]
 mutex_lock_nested+0x77/0x6d0
 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core]
 ? loop_set_wakeup_filter+0x44/0xbd [rc_loopback]
 ir_raw_encode_scancode+0x3e/0xb0 [rc_core]
 loop_set_wakeup_filter+0x62/0xbd [rc_loopback]
 ? loop_set_tx_duty_cycle+0x70/0x70 [rc_loopback]
 store_filter+0x1aa/0x240 [rc_core]
 dev_attr_store+0x18/0x30
 sysfs_kf_write+0x45/0x60
 kernfs_fop_write+0x155/0x1e0
 __vfs_write+0x37/0x160
 ? rcu_read_lock_sched_held+0x4a/0x80
 ? rcu_sync_lockdep_assert+0x2f/0x60
 ? __sb_start_write+0x10c/0x220
 ? vfs_write+0x195/0x1e0
 ? security_file_permission+0x3b/0xc0
 vfs_write+0xc8/0x1e0
 SyS_write+0x58/0xc0
 entry_SYSCALL_64_fastpath+0x1f/0xc2

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix compiling a BE kernel with a powerpc64le toolchain

[ Upstream commit 4dc831aa88132f835cefe876aa0206977c4d7710 ]

GCC can compile with either endian, but the default ABI version is set
based on the default endianness of the toolchain. Alan Modra says:

  you need both -mbig and -mabi=elfv1 to make a powerpc64le gcc
  generate powerpc64 code

The opposite is true for powerpc64 when generating -mlittle it
requires -mabi=elfv2 to generate v2 ABI, which we were already doing.

This change adds ABI annotations together with endianness for all cases,
LE and BE. This fixes the case of building a BE kernel with a toolchain
that is LE by default.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftest/powerpc: Fix false failures for skipped tests

[ Upstream commit a6d8a21596df041f36f4c2ccc260c459e3e851f1 ]

Tests under alignment subdirectory are skipped when executed on previous
generation hardware, but harness still marks them as failed.

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [FAIL]

The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till
the program exit which causes the test to be marked as failed.

This patch resets the value before returning to the main() routine.
With this patch the test o/p is as follows:

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [PASS]

Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64: Invalidate process table caching after setting process table

[ Upstream commit 7a70d7288c926ae88e0c773fbb506aa374e99c2d ]

The POWER9 MMU reads and caches entries from the process table.
When we kexec from one kernel to another, the second kernel sets
its process table pointer but doesn't currently do anything to
make the CPU invalidate any cached entries from the old process table.
This adds a tlbie (TLB invalidate entry) instruction with parameters
to invalidate caching of the process table after the new process
table is installed.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hpet: Prevent might sleep splat on resume

[ Upstream commit bb1a2c26165640ba2cbcfe06c81e9f9d6db4e643 ]

Sergey reported a might sleep warning triggered from the hpet resume
path. It's caused by the call to disable_irq() from interrupt disabled
context.

The problem with the low level resume code is that it is not accounted as a
special system_state like we do during the boot process. Calling the same
code during system boot would not trigger the warning. That's inconsistent
at best.

In this particular case it's trivial to replace the disable_irq() with
disable_hardirq() because this particular code path is solely used from
system resume and the involved hpet interrupts can never be force threaded.

Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703012108460.3684@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Make select_idle_cpu() more aggressive

[ Upstream commit 4c77b18cf8b7ab37c7d5737b4609010d2ceec5f0 ]

Kitsunyan reported desktop latency issues on his Celeron 887 because
of commit:

  1b568f0aabf2 ("sched/core: Optimize SCHED_SMT")

... even though his CPU doesn't do SMT.

The effect of running the SMT code on a !SMT part is basically a more
aggressive select_idle_cpu(). Removing the avg condition fixed things
for him.

I also know FB likes this test gone, even though other workloads like
having it.

For now, take it out by default, until we get a better idea.

Reported-by: kitsunyan <kitsunyan@inbox.ru>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register

[ Upstream commit 1b17c6df852851b40c3c27c66b8fa2fd99cf25d8 ]

Writing to the software acknowledge clear register when there are no
pending messages causes a HUB error to assert. The original intent of this
write was to clear the pending bits before start of operation, but this is
an incorrect method and has been determined to be unnecessary.

Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: rja@hpe.com
Cc: sivanich@hpe.com
Link: http://lkml.kernel.org/r/1487351269-181133-1-git-send-email-abanman@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/selftests: Add clobbers for int80 on x86_64

[ Upstream commit 2a4d0c627f5374f365a873dea4e10ae0bb437680 ]

Kernel erases R8..R11 registers prior returning to userspace
from int80:

  https://lkml.org/lkml/2009/10/1/164

GCC can reuse these registers and doesn't expect them to change
during syscall invocation. I met this kind of bug in CRIU once
GCC 6.1 and CLANG stored local variables in those registers
and the kernel zerofied them during syscall:

  https://github.com/xemul/criu/commit/990d33f1a1cdd17bca6c2eb059ab3be2564f7fa2

By that reason I suggest to add those registers to clobbers
in selftests.  Also, as noted by Andy - removed unneeded clobber
for flags in INT $0x80 inline asm.

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Link: http://lkml.kernel.org/r/20170213101336.20486-1-dsafonov@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure

[ Upstream commit 7807e086a2d1f69cc1a57958cac04fea79fc2112 ]

gpmc_probe_onenand_child returns success even on gpmc_onenand_init
failure. Fix that.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti6: Don't report path MTU below IPV6_MIN_MTU.

[ Upstream commit e3dc847a5f85b43ee2bfc8eae407a7e383483228 ]

In vti6_xmit(), the check for IPV6_MIN_MTU before we
send a ICMPV6_PKT_TOOBIG message is missing. So we might
report a PMTU below 1280. Fix this by adding the required
check.

Fixes: ccd740cbc6e ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8657/1: uaccess: consistently check object sizes

[ Upstream commit 32b143637e8180f5d5cea54320c769210dea4f19 ]

In commit 76624175dcae ("arm64: uaccess: consistently check object sizes"),
the object size checks are moved outside the access_ok() so that bad
destinations are detected before hitting the "memset(dest, 0, size)" in the
copy_from_user() failure path.

This makes the same change for arm, with attention given to possibly
extracting the uaccess routines into a common header file for all
architectures in the future.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA"

This reverts commit dadab2d4e3cf708ceba22ecddd94aedfecb39199.

Not required on < 4.10.

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/armada: Fix compile fail"

This reverts commit 82f260d472c3b4dbb7324624e395c3e91f73a040.

Not required on < 4.10.

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: drop unused pmdp_huge_get_and_clear_notify()

commit c0c379e2931b05facef538e53bf3b21f283d9a0b upstream.

Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the
last pmdp_huge_get_and_clear_notify() user is gone.

Let's drop the helper.

Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.9]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thp: fix MADV_DONTNEED vs. numa balancing race

commit ced108037c2aa542b3ed8b7afd1576064ad1362a upstream.

In case prot_numa, we are under down_read(mmap_sem).  It's critical to
not clear pmd intermittently to avoid race with MADV_DONTNEED which is
also under down_read(mmap_sem):

CPU0: CPU1:
change_huge_pmd(prot_numa=1)
 pmdp_huge_get_and_clear_notify()
madvise_dontneed()
 zap_pmd_range()
  pmd_trans_huge(*pmd) == 0 (without ptl)
  // skip the pmd
 set_pmd_at();
 // pmd is re-established

The race makes MADV_DONTNEED miss the huge pmd and don't clear it
which may break userspace.

Found by code analysis, never saw triggered.

Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.9 ]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thp: reduce indentation level in change_huge_pmd()

commit 0a85e51d37645e9ce57e5e1a30859e07810ed07c upstream.

Patch series "thp: fix few MADV_DONTNEED races"

For MADV_DONTNEED to work properly with huge pages, it's critical to not
clear pmd intermittently unless you hold down_write(mmap_sem).

Otherwise MADV_DONTNEED can miss the THP which can lead to userspace
breakage.

See example of such race in commit message of patch 2/4.

All these races are found by code inspection.  I haven't seen them
triggered.  I don't think it's worth to apply them to stable@.

This patch (of 4):

Restructure code in preparation for a fix.

Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.9]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: avoid faulting on qemu

commit 3aaf33bebda8d4ffcc0fc8ef39e6c1ac68823b11 upstream.

When qemu starts a kernel in a bare environment, the default SCR has
the AW and FW bits clear, which means that the kernel can't modify
the PSR A or PSR F bits, and means that FIQs and imprecise aborts are
always masked.

When running uboot under qemu, the AW and FW SCR bits are set, and the
kernel functions normally - and this is how real hardware behaves.

Fix this for qemu by ignoring the FIQ bit.

Fixes: 8bafae202c82 ("ARM: BUG if jumping to usermode address in kernel mode")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: BUG if jumping to usermode address in kernel mode

commit 8bafae202c82dc257f649ea3c275a0f35ee15113 upstream.

Detect if we are returning to usermode via the normal kernel exit paths
but the saved PSR value indicates that we are in kernel mode.  This
could occur due to corrupted stack state, which has been observed with
"ftracetest".

This ensures that we catch the problem case before we get to user code.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT

commit a3acc696085e112733d191a77b106e67a4fa110b upstream.

The specification says that the Reserved1 field in OS_DESC_EXT_COMPAT
must have the value "1", but when this feature was first implemented we
rejected any non-zero values.

This was adjusted to accept all non-zero values (while now rejecting
zero) in commit 53642399aa71 ("usb: gadget: f_fs: Fix wrong check on
reserved1 of OS_DESC_EXT_COMPAT"), but that breaks any userspace
programs that worked previously by returning EINVAL when Reserved1 == 0
which was previously the only value that succeeded!

If we just set the field to "1" ourselves, both old and new userspace
programs continue to work correctly and, as a bonus, old programs are
now compliant with the specification without having to fix anything
themselves.

Fixes: 53642399aa71 ("usb: gadget: f_fs: Fix wrong check on reserved1 of OS_DESC_EXT_COMPAT")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix ctr-aes-talitos

commit 70d355ccea899dad47dc22d3a4406998f55143fd upstream.

ctr-aes-talitos test fails as follows on SEC2

[    0.837427] alg: skcipher: Test 1 failed (invalid result) on encryption for ctr-aes-talitos
[    0.845763] 00000000: 16 36 d5 ee 34 f8 06 25 d7 7f 8e 56 ca 88 43 45
[    0.852345] 00000010: f9 3f f7 17 2a b2 12 23 30 43 09 15 82 dd e1 97
[    0.858940] 00000020: a7 f7 32 b5 eb 25 06 13 9a ec f5 29 25 f8 4d 66
[    0.865366] 00000030: b0 03 5b 8e aa 9a 42 b6 19 33 8a e2 9d 65 96 95

This patch fixes the descriptor type which is special for CTR AES

Fixes: 5e75ae1b3cef6 ("crypto: talitos - add new crypto modes")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix use of sg_link_tbl_len

commit fbb22137c4d9bab536958b152d096fb3f98020ea upstream.

sg_link_tbl_len shall be used instead of cryptlen, otherwise
SECs which perform HW CICV verification will fail.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix AEAD for sha224 on non sha224 capable chips

commit 6cda075aff67a1b9b5ba1b2818091dc939643b6c upstream.

sha224 AEAD test fails with:

[    2.803125] talitos ff020000.crypto: DEUISR 0x00000000_00000000
[    2.808743] talitos ff020000.crypto: MDEUISR 0x80100000_00000000
[    2.814678] talitos ff020000.crypto: DESCBUF 0x20731f21_00000018
[    2.820616] talitos ff020000.crypto: DESCBUF 0x0628d64c_00000010
[    2.826554] talitos ff020000.crypto: DESCBUF 0x0631005c_00000018
[    2.832492] talitos ff020000.crypto: DESCBUF 0x0628d664_00000008
[    2.838430] talitos ff020000.crypto: DESCBUF 0x061b13a0_00000080
[    2.844369] talitos ff020000.crypto: DESCBUF 0x0631006c_00000080
[    2.850307] talitos ff020000.crypto: DESCBUF 0x0631006c_00000018
[    2.856245] talitos ff020000.crypto: DESCBUF 0x063100ec_00000000
[    2.884972] talitos ff020000.crypto: failed to reset channel 0
[    2.890503] talitos ff020000.crypto: done overflow, internal time out, or rngu error: ISR 0x20000000_00020000
[    2.900652] alg: aead: encryption failed on test 1 for authenc-hmac-sha224-cbc-3des-talitos: ret=22

This is due to SHA224 not being supported by the HW. Allthough for
hash we are able to init the hash context by SW, it is not
possible for AEAD. Therefore SHA224 AEAD has to be deactivated.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix setkey to check key weakness

commit f384cdc4faf350fdb6ad93c5f26952b9ba7c7566 upstream.

Crypto manager test report the following failures:
[    3.061081] alg: skcipher: setkey failed on test 5 for ecb-des-talitos: flags=100
[    3.069342] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
[    3.077754] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100

This is due to setkey being expected to detect weak keys.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix memory corruption on SEC2

commit e04a61bebc5da1535b6f194b464295b8d558e2fc upstream.

On SEC2, when using the old descriptors type (hmac snoop no afeu)
for doing IPsec, the CICV out pointeur points out of the allocated
memory.

[    2.502554] =============================================================================
[    2.510740] BUG dma-kmalloc-256 (Not tainted): Redzone overwritten
[    2.516907] -----------------------------------------------------------------------------
[    2.516907]
[    2.526535] Disabling lock debugging due to kernel taint
[    2.531845] INFO: 0xde858108-0xde85810b. First byte 0xf8 instead of 0xcc
[    2.538549] INFO: Allocated in 0x806181a9 age=0 cpu=0 pid=58
[    2.544229]  __kmalloc+0x374/0x564
[    2.547649]  talitos_edesc_alloc+0x17c/0x48c
[    2.551929]  aead_edesc_alloc+0x80/0x154
[    2.555863]  aead_encrypt+0x30/0xe0
[    2.559368]  __test_aead+0x5a0/0x1f3c
[    2.563042]  test_aead+0x2c/0x110
[    2.566371]  alg_test_aead+0x5c/0xf4
[    2.569958]  alg_test+0x1dc/0x5a0
[    2.573305]  cryptomgr_test+0x50/0x70
[    2.576984]  kthread+0xd8/0x134
[    2.580155]  ret_from_kernel_thread+0x5c/0x64
[    2.584534] INFO: Freed in ipsec_esp_encrypt_done+0x130/0x240 age=6 cpu=0 pid=0
[    2.591839]  ipsec_esp_encrypt_done+0x130/0x240
[    2.596395]  flush_channel+0x1dc/0x488
[    2.600161]  talitos2_done_4ch+0x30/0x200
[    2.604185]  tasklet_action+0xa0/0x13c
[    2.607948]  __do_softirq+0x148/0x6cc
[    2.611623]  irq_exit+0xc0/0x124
[    2.614869]  call_do_irq+0x24/0x3c
[    2.618292]  do_IRQ+0x78/0x108
[    2.621369]  ret_from_except+0x0/0x14
[    2.625055]  finish_task_switch+0x58/0x350
[    2.629165]  schedule+0x80/0x134
[    2.632409]  schedule_preempt_disabled+0x38/0xc8
[    2.637042]  cpu_startup_entry+0xe4/0x190
[    2.641074]  start_kernel+0x3f4/0x408
[    2.644741]  0x3438
[    2.646857] INFO: Slab 0xdffbdb00 objects=9 used=1 fp=0xde8581c0 flags=0x0080
[    2.653978] INFO: Object 0xde858008 @offset=8 fp=0xca4395df
[    2.653978]
[    2.661032] Redzone de858000: cc cc cc cc cc cc cc cc                          ........
[    2.669029] Object de858008: 00 00 00 02 00 00 00 02 00 6b 6b 6b 1e 83 ea 28  .........kkk...(
[    2.677628] Object de858018: 00 00 00 70 1e 85 80 64 ff 73 1d 21 6b 6b 6b 6b  ...p...d.s.!kkkk
[    2.686228] Object de858028: 00 20 00 00 1e 84 17 24 00 10 00 00 1e 85 70 00  . .....$......p.
[    2.694829] Object de858038: 00 18 00 00 1e 84 17 44 00 08 00 00 1e 83 ea 28  .......D.......(
[    2.703430] Object de858048: 00 80 00 00 1e 84 f0 00 00 80 00 00 1e 85 70 10  ..............p.
[    2.712030] Object de858058: 00 20 6b 00 1e 85 80 f4 6b 6b 6b 6b 00 80 02 00  . k.....kkkk....
[    2.720629] Object de858068: 1e 84 f0 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  ....kkkkkkkkkkkk
[    2.729230] Object de858078: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[    2.737830] Object de858088: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[    2.746429] Object de858098: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[    2.755029] Object de8580a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[    2.763628] Object de8580b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[    2.772229] Object de8580c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[    2.780829] Object de8580d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
[    2.789430] Object de8580e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 73 b0 ea 9f  kkkkkkkkkkkks...
[    2.798030] Object de8580f8: e8 18 80 d6 56 38 44 c0 db e3 4f 71 f7 ce d1 d3  ....V8D...Oq....
[    2.806629] Redzone de858108: f8 bd 3e 4f                                      ..>O
[    2.814279] Padding de8581b0: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
[    2.822283] CPU: 0 PID: 0 Comm: swapper Tainted: G    B           4.9.50-g995be12679 #179
[    2.831819] Call Trace:
[    2.834301] [dffefd20] [c01aa9a8] check_bytes_and_report+0x100/0x194 (unreliable)
[    2.841801] [dffefd50] [c01aac3c] check_object+0x200/0x530
[    2.847306] [dffefd80] [c01ae584] free_debug_processing+0x290/0x690
[    2.853585] [dffefde0] [c01aec8c] __slab_free+0x308/0x628
[    2.859000] [dffefe80] [c05057f4] ipsec_esp_encrypt_done+0x130/0x240
[    2.865378] [dffefeb0] [c05002c4] flush_channel+0x1dc/0x488
[    2.870968] [dffeff10] [c05007a8] talitos2_done_4ch+0x30/0x200
[    2.876814] [dffeff30] [c002fe38] tasklet_action+0xa0/0x13c
[    2.882399] [dffeff60] [c002f118] __do_softirq+0x148/0x6cc
[    2.887896] [dffeffd0] [c002f954] irq_exit+0xc0/0x124
[    2.892968] [dffefff0] [c0013adc] call_do_irq+0x24/0x3c
[    2.898213] [c0d4be00] [c000757c] do_IRQ+0x78/0x108
[    2.903113] [c0d4be30] [c0015c08] ret_from_except+0x0/0x14
[    2.908634] --- interrupt: 501 at finish_task_switch+0x70/0x350
[    2.908634]     LR = finish_task_switch+0x58/0x350
[    2.919327] [c0d4bf20] [c085e1d4] schedule+0x80/0x134
[    2.924398] [c0d4bf50] [c085e2c0] schedule_preempt_disabled+0x38/0xc8
[    2.930853] [c0d4bf60] [c007f064] cpu_startup_entry+0xe4/0x190
[    2.936707] [c0d4bfb0] [c096c434] start_kernel+0x3f4/0x408
[    2.942198] [c0d4bff0] [00003438] 0x3438
[    2.946137] FIX dma-kmalloc-256: Restoring 0xde858108-0xde85810b=0xcc
[    2.946137]
[    2.954158] FIX dma-kmalloc-256: Object at 0xde858008 not freed

This patch reworks the handling of the CICV out in order
to properly handle all cases.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: talitos - fix AEAD test failures

commit ec8c7d14acc0a477429d3a6fade5dab72c996c82 upstream.

AEAD tests fail when destination SG list has more than 1 element.

[    2.058752] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[    2.066965] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: c0 43 ff 74 c0 43 ff e0 de 83 d1 20 de 84 8e 54
00000020: de 83 d7 c4
[    2.082138] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[    2.090435] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: de 84 ea 58 c0 93 1a 24 de 84 e8 59 de 84 f1 20
00000020: 00 00 00 00
[    2.105721] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[    2.114259] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[    2.166410] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[    2.174794] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[    2.226486] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[    2.236459] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[    2.247196] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[    2.255555] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[    2.309004] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[    2.317562] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[    2.370710] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[    2.379177] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[    2.397863] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[    2.406134] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[    2.424789] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[    2.433491] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc
[    2.488832] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[    2.497387] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc

This patch fixes that.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.

commit b69f63ebf553504739cc8534cbed31bd530c6f0b upstream.

Unregistering the driver before calling cpuhp_remove_multi_state() removes
any remaining hotplug cpu instances so __cpuhp_remove_state_cpuslocked()
doesn't emit this warning:

[  268.748362] Error: Removing state 147 which has instances left.
[  268.748373] ------------[ cut here ]------------
[  268.748386] WARNING: CPU: 2 PID: 5476 at kernel/cpu.c:1734 __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[  268.748389] Modules linked in: arm_ccn(-) [last unloaded: arm_ccn]
[  268.748403] CPU: 2 PID: 5476 Comm: rmmod Tainted: G        W       4.14.0-rc4+ #3
[  268.748406] Hardware name: AMD Seattle/Seattle, BIOS 10:18:39 Dec  8 2016
[  268.748410] task: ffff8001a18ca000 task.stack: ffff80019c120000
[  268.748416] PC is at __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[  268.748421] LR is at __cpuhp_remove_state_cpuslocked+0x448/0x4f0
[  268.748425] pc : [<ffff2000081729ec>] lr : [<ffff2000081729e0>] pstate: 60000145
[  268.748427] sp : ffff80019c127d30
[  268.748430] x29: ffff80019c127d30 x28: ffff8001a18ca000
[  268.748437] x27: ffff20000c2cb000 x26: 1fffe4000042d490
[  268.748443] x25: ffff20000216a480 x24: 0000000000000000
[  268.748449] x23: ffff20000b08e000 x22: 0000000000000001
[  268.748455] x21: 0000000000000093 x20: 00000000000016f8
[  268.748460] x19: ffff20000c2cbb80 x18: 0000ffffb5fe7c58
[  268.748466] x17: 00000000004402d0 x16: 1fffe40001864f01
[  268.748472] x15: ffff20000c4bf8b0 x14: 0000000000000000
[  268.748477] x13: 0000000000007032 x12: ffff20000829ae48
[  268.748483] x11: ffff20000c4bf000 x10: 0000000000000004
[  268.748488] x9 : 0000000000006fbc x8 : ffff20000c318a40
[  268.748494] x7 : 0000000000000000 x6 : ffff040001864f02
[  268.748500] x5 : 0000000000000000 x4 : 0000000000000000
[  268.748505] x3 : 0000000000000007 x2 : dfff200000000000
[  268.748510] x1 : 000000000000ad3d x0 : 00000000000001f0
[  268.748516] Call trace:
[  268.748521] Exception stack(0xffff80019c127bf0 to 0xffff80019c127d30)
[  268.748526] 7be0:                                   00000000000001f0 000000000000ad3d
[  268.748531] 7c00: dfff200000000000 0000000000000007 0000000000000000 0000000000000000
[  268.748535] 7c20: ffff040001864f02 0000000000000000 ffff20000c318a40 0000000000006fbc
[  268.748539] 7c40: 0000000000000004 ffff20000c4bf000 ffff20000829ae48 0000000000007032
[  268.748544] 7c60: 0000000000000000 ffff20000c4bf8b0 1fffe40001864f01 00000000004402d0
[  268.748548] 7c80: 0000ffffb5fe7c58 ffff20000c2cbb80 00000000000016f8 0000000000000093
[  268.748553] 7ca0: 0000000000000001 ffff20000b08e000 0000000000000000 ffff20000216a480
[  268.748557] 7cc0: 1fffe4000042d490 ffff20000c2cb000 ffff8001a18ca000 ffff80019c127d30
[  268.748562] 7ce0: ffff2000081729e0 ffff80019c127d30 ffff2000081729ec 0000000060000145
[  268.748566] 7d00: 00000000000001f0 0000000000000000 0001000000000000 0000000000000000
[  268.748569] 7d20: ffff80019c127d30 ffff2000081729ec
[  268.748575] [<ffff2000081729ec>] __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[  268.748580] [<ffff200008172adc>] __cpuhp_remove_state+0x54/0x80
[  268.748597] [<ffff20000215dd84>] arm_ccn_exit+0x2c/0x70 [arm_ccn]
[  268.748604] [<ffff20000834cfbc>] SyS_delete_module+0x5a4/0x708
[  268.748607] Exception stack(0xffff80019c127ec0 to 0xffff80019c128000)
[  268.748612] 7ec0: 0000000019bb7258 0000000000000800 ba64d0fb3d26a800 00000000000000da
[  268.748616] 7ee0: 0000ffffb6144e28 0000ffffcd95b409 fefefefefefefeff 7f7f7f7f7f7f7f7f
[  268.748621] 7f00: 000000000000006a 1999999999999999 0000ffffb6179000 0000000000bbcc6d
[  268.748625] 7f20: 0000ffffb6176b98 0000ffffcd95c2d0 0000ffffb5fe7b58 0000ffffb6163000
[  268.748630] 7f40: 0000ffffb60ad3e0 00000000004402d0 0000ffffb5fe7c58 0000000019bb71f0
[  268.748634] 7f60: 0000ffffcd95c740 0000000000000000 0000000019bb71f0 0000000000416700
[  268.748639] 7f80: 0000000000000000 00000000004402e8 0000000019bb6010 0000ffffcd95c748
[  268.748643] 7fa0: 0000000000000000 0000ffffcd95c460 00000000004113a8 0000ffffcd95c460
[  268.748648] 7fc0: 0000ffffb60ad3e8 0000000080000000 0000000019bb7258 000000000000006a
[  268.748652] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  268.748657] [<ffff200008084f9c>] __sys_trace_return+0x0/0x4
[  268.748661] ---[ end trace a996d358dcaa7f9c ]---

Fixes: 8df038725ad5 ("bus/arm-ccn: Use cpu-hp's multi instance support instead custom list")
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-ccn: Fix use of smp_processor_id() in preemptible context

commit b18c2b9487d8e797fc0a757e57ac3645348c5fba upstream.

Booting a DEBUG_PREEMPT enabled kernel on a CCN-based system
results in the following splat:

[...]
arm-ccn e8000000.ccn: No access to interrupts, using timer.
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x1c/0x28
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0 #6111
Hardware name: AMD Seattle/Seattle, BIOS 17:08:23 Jun 26 2017
Call trace:
[<ffff000008089e78>] dump_backtrace+0x0/0x278
[<ffff00000808a22c>] show_stack+0x24/0x30
[<ffff000008bc3bc4>] dump_stack+0x8c/0xb0
[<ffff00000852b534>] check_preemption_disabled+0xfc/0x100
[<ffff00000852b554>] debug_smp_processor_id+0x1c/0x28
[<ffff000008551bd8>] arm_ccn_probe+0x358/0x4f0
[...]

as we use smp_processor_id() in the wrong context.

Turn this into a get_cpu()/put_cpu() that extends over the CPU hotplug
registration, making sure that we don't race against a CPU down operation.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-ccn: Check memory allocation failure

commit 24771179c5c138f0ea3ef88b7972979f62f2d5db upstream.

Check memory allocation failures and return -ENOMEM in such cases

This avoids a potential NULL pointer dereference.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-cci: Fix use of smp_processor_id() in preemptible context

commit 4608af8aa53e7f3922ddee695d023b7bcd5cb35b upstream.

The ARM CCI driver seem to be using smp_processor_id() in a
preemptible context, which is likely to make a DEBUG_PREMPT
kernel scream at boot time.

Turn this into a get_cpu()/put_cpu() that extends over the CPU
hotplug registration, making sure that we don't race against
a CPU down operation.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fpsimd: Prevent registers leaking from dead tasks

commit 071b6d4a5d343046f253a5a8835d477d93992002 upstream.

Currently, loading of a task's fpsimd state into the CPU registers
is skipped if that task's state is already present in the registers
of that CPU.

However, the code relies on the struct fpsimd_state * (and by
extension struct task_struct *) to unambiguously identify a task.

There is a particular case in which this doesn't work reliably:
when a task exits, its task_struct may be recycled to describe a
new task.

Consider the following scenario:

 1) Task P loads its fpsimd state onto cpu C.
        per_cpu(fpsimd_last_state, C) := P;
        P->thread.fpsimd_state.cpu := C;

 2) Task X is scheduled onto C and loads its fpsimd state on C.
        per_cpu(fpsimd_last_state, C) := X;
        X->thread.fpsimd_state.cpu := C;

 3) X exits, causing X's task_struct to be freed.

 4) P forks a new child T, which obtains X's recycled task_struct.
T == X.
T->thread.fpsimd_state.cpu == C (inherited from P).

 5) T is scheduled on C.
T's fpsimd state is not loaded, because
per_cpu(fpsimd_last_state, C) == T (== X) &&
T->thread.fpsimd_state.cpu == C.

        (This is the check performed by fpsimd_thread_switch().)

So, T gets X's registers because the last registers loaded onto C
were those of X, in (2).

This patch fixes the problem by ensuring that the sched-in check
fails in (5): fpsimd_flush_task_state(T) is called when T is
forked, so that T->thread.fpsimd_state.cpu == C cannot be true.
This relies on the fact that T is not schedulable until after
copy_thread() completes.

Once T's fpsimd state has been loaded on some CPU C there may still
be other cpus D for which per_cpu(fpsimd_last_state, D) ==
&X->thread.fpsimd_state.  But D is necessarily != C in this case,
and the check in (5) must fail.

An alternative fix would be to do refcounting on task_struct.  This
would result in each CPU holding a reference to the last task whose
fpsimd state was loaded there.  It's not clear whether this is
preferable, and it involves higher overhead than the fix proposed
in this patch.  It would also move all the task_struct freeing
work into the context switch critical section, or otherwise some
deferred cleanup mechanism would need to be introduced, neither of
which seems obviously justified.

Fixes: 005f78cd8849 ("arm64: defer reloading a task's FPSIMD state to userland resume")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: word-smithed the comment so it makes more sense]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: vgic-its: Check result of allocation before use

commit 686f294f2f1ae40705283dd413ca1e4c14f20f93 upstream.

We miss a test against NULL after allocation.

Fixes: 6d03a68f8054 ("KVM: arm64: vgic-its: Turn device_id validation into generic ID validation")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: vgic-irqfd: Fix MSI entry allocation

commit 150009e2c70cc3c6e97f00e7595055765d32fb85 upstream.

Using the size of the structure we're allocating is a good idea
and avoids any surprise... In this case, we're happilly confusing
kvm_kernel_irq_routing_entry and kvm_irq_routing_entry...

Fixes: 95b110ab9a09 ("KVM: arm/arm64: Enable irqchip routing")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion

commit fc396e066318c0a02208c1d3f0b62950a7714999 upstream.

We are incorrectly rearranging 32-bit words inside a 64-bit typed value
for big endian systems, which would result in never marking a virtual
interrupt as inactive on big endian systems (assuming 32 or fewer LRs on
the hardware).  Fix this by not doing any word order manipulation for
the typed values.

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: remove I/O port 0x80 bypass on Intel hosts

commit d59d51f088014f25c2562de59b9abff4f42a7468 upstream.

This fixes CVE-2017-1000407.

KVM allows guests to directly access I/O port 0x80 on Intel hosts.  If
the guest floods this port with writes it generates exceptions and
instability in the host kernel, leading to a crash.  With this change
guest writes to port 0x80 on Intel will behave the same as they
currently behave on AMD systems.

Prevent the flooding by removing the code that sets port 0x80 as a
passthrough port.  This is essentially the same as upstream patch
99f85a28a78e96d28907fe036e1671a218fee597, except that patch was
for AMD chipsets and this patch is for Intel.

Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes: fdef3ad1b386 ("KVM: VMX: Enable io bitmaps to avoid IO port 0x80 VMEXITs")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one

commit 5553b142be11e794ebc0805950b2e8313f93d718 upstream.

VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 39-bit addresses (instead of 40-bit) and also
insufficiently checking the alignment. This patch fixes it.

This patch is the 32bit pendent of Kristina's arm64 fix, and
she deserves the actual kudos for pinpointing that one.

Fixes: f7ed45be3ba52 ("KVM: ARM: World-switch implementation")
Reported-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one

commit 26aa7b3b1c0fb3f1a6176a0c1847204ef4355693 upstream.

VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 47-bit addresses (instead of 48-bit) and also
insufficiently checking the alignment. This patch fixes it.

As an example, with 4k pages, before this patch we have:

  PHYS_MASK_SHIFT = 48
  VTTBR_X = 37 - 24 = 13
  VTTBR_BADDR_SHIFT = 13 - 1 = 12
  VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000

Which is wrong, because the mask doesn't allow bit 47 of the VTTBR
address to be set, and only requires the address to be 12-bit (4k)
aligned, while it actually needs to be 13-bit (8k) aligned because we
concatenate two 4k tables.

With this patch, the mask becomes 0x0000ffffffffe000, which is what we
want.

Fixes: 0369f6a34b9f ("arm64: KVM: EL2 register definitions")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb: i2c transfers over usb cannot be done from stack

commit 6d33377f2abbf9f0e561b116dd468d1c3ff36a6a upstream.

Signed-off-by: Laurent Caumont <lcaumont2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU

commit 120a264f9c2782682027d931d83dcbd22e01da80 upstream.

When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver
are contiguous, because of the underlying dma_alloc_attrs() function
provides only such buffers. In such case it makes no sense to keep
BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid
failures for buffer contiguity checks in the subsequent operations on GEM
objects.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: Fix handling of kallsyms_symbol_next() return value

commit c07d35338081d107e57cf37572d8cc931a8e32e2 upstream.

kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.

This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: change driver unbind order of the sdio function devices

commit 5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 upstream.

In the function brcmf_sdio_firmware_callback() the driver is
unbound from the sdio function devices in the error path.
However, the order in which it is done resulted in a use-after-free
issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change
the order and first unbind sdio function #2 device and then
unbind sdio function #1 device.

Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Initialize ISAv3 MMU registers before setting partition table

commit 371b80447ff33ddac392c189cf884a5a3e18faeb upstream.

kexec can leave MMU registers set when booting into a new kernel,
the PIDR (Process Identification Register) in particular. The boot
sequence does not zero PIDR, so it only gets set when CPUs first
switch to a userspace processes (until then it's running a kernel
thread with effective PID = 0).

This leaves a window where a process table entry and page tables are
set up due to user processes running on other CPUs, that happen to
match with a stale PID. The CPU with that PID may cause speculative
accesses that address quadrant 0 (aka userspace addresses), which will
result in cached translations and PWC (Page Walk Cache) for that
process, on a CPU which is not in the mm_cpumask and so they will not
be invalidated properly.

The most common result is the kernel hanging in infinite page fault
loops soon after kexec (usually in schedule_tail, which is usually the
first non-speculative quadrant 0 access to a new PID) due to a stale
PWC. However being a stale translation error, it could result in
anything up to security and data corruption problems.

Fix this by zeroing out PIDR at boot and kexec.

Fixes: 7e381c0ff618 ("powerpc/mm/radix: Add mmu context handling callback for radix")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: Fix skey emulation permission check

commit ca76ec9ca871e67d8cd0b6caba24aca3d3ac4546 upstream.

All skey functions call skey_check_enable at their start, which checks
if we are in the PSTATE and injects a privileged operation exception
if we are.

Unfortunately they continue processing afterwards and perform the
operation anyhow as skey_check_enable does not deliver an error if the
exception injection was successful.

Let's move the PSTATE check into the skey functions and exit them on
such an occasion, also we now do not enable skey handling anymore in
such a case.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: a7e19ab ("KVM: s390: handle missing storage-key facility")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix compat system call table

commit e779498df587dd2189b30fe5b9245aefab870eb8 upstream.

When wiring up the socket system calls the compat entries were
incorrectly set. Not all of them point to the corresponding compat
wrapper functions, which clear the upper 33 bits of user space
pointers, like it is required.

Fixes: 977108f89c989 ("s390: wire up separate socketcalls system calls")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smp/hotplug: Move step CPUHP_AP_SMPCFD_DYING to the correct place

commit 46febd37f9c758b05cd25feae8512f22584742fe upstream.

Commit 31487f8328f2 ("smp/cfd: Convert core to hotplug state machine")
accidently put this step on the wrong place. The step should be at the
cpuhp_ap_states[] rather than the cpuhp_bp_states[].

grep smpcfd /sys/devices/system/cpu/hotplug/states
 40: smpcfd:prepare
129: smpcfd:dying

"smpcfd:dying" was missing before.
So was the invocation of the function smpcfd_dying_cpu().

Fixes: 31487f8328f2 ("smp/cfd: Convert core to hotplug state machine")
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20171128131954.81229-1-jiangshanlai@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix scatterlist offset handling

commit 29a90b70893817e2f2bb3cea40a29f5308e21b21 upstream.

The intel-iommu DMA ops fail to correctly handle scatterlists where
sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed
appropriately based on the page-aligned portion of the offset, but the
mapping is set up relative to sg->page, which means it fails to actually
cover the whole buffer (and in the worst case doesn't cover it at all):

    (sg->dma_address + sg->dma_len) ----+
    sg->dma_address ---------+          |
    iov_pfn------+           |          |
                 |           |          |
                 v           v          v
iova:   a        b        c        d        e        f
        |--------|--------|--------|--------|--------|
                          <...calculated....>
                 [_____mapped______]
pfn:    0        1        2        3        4        5
        |--------|--------|--------|--------|--------|
                 ^           ^          ^
                 |           |          |
    sg->page ----+           |          |
    sg->offset --------------+          |
    (sg->offset + sg->length) ----------+

As a result, the caller ends up overrunning the mapping into whatever
lies beyond, which usually goes badly:

[  429.645492] DMAR: DRHD: handling fault status reg 2
[  429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ...

Whilst this is a fairly rare occurrence, it can happen from the result
of intermediate scatterlist processing such as scatterwalk_ffwd() in the
crypto layer. Whilst that particular site could be fixed up, it still
seems worthwhile to bring intel-iommu in line with other DMA API
implementations in handling this robustly.

To that end, fix the intel_map_sg() path to line up the mapping
correctly (in units of MM pages rather than VT-d pages to match the
aligned_nrpages() calculation) regardless of the offset, and use
sg_phys() consistently for clarity.

Reported-by: Harsh Jain <Harsh@chelsio.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed by: Ashok Raj <ashok.raj@intel.com>
Tested by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add check return value for usb_string()

commit 89b89d121ffcf8d9546633b98ded9d18b8f75891 upstream.

snd_usb_copy_string_desc() returns zero if usb_string() fails.
In case of failure, we need to check the snd_usb_copy_string_desc()'s
return value and add an exception case

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix out-of-bound error

commit 251552a2b0d454badc8f486e6d79100970c744b0 upstream.

The snd_usb_copy_string_desc() retrieves the usb string corresponding to
the index number through the usb_string(). The problem is that the
usb_string() returns the length of the string (>= 0) when successful, but
it can also return a negative value about the error case or status of
usb_control_msg().

If iClockSource is '0' as shown below, usb_string() will returns -EINVAL.
This will result in '0' being inserted into buf[-22], and the following
KASAN out-of-bound error message will be output.

AudioControl Interface Descriptor:
  bLength                 8
  bDescriptorType        36
  bDescriptorSubtype     10 (CLOCK_SOURCE)
  bClockID                1
  bmAttributes         0x07 Internal programmable Clock (synced to SOF)
  bmControls           0x07
  Clock Frequency Control (read/write)
  Clock Validity Control (read-only)
  bAssocTerminal          0
  iClockSource            0

To fix it, check usb_string()'return value and bail out.

==================================================================
BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376

CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3
Hardware name: LG Electronics                   15N540-RFLGL/White Tip Mountain, BIOS 15N5
Call Trace:
dump_stack+0x63/0x8d
print_address_description+0x70/0x290
? parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
kasan_report+0x265/0x350
__asan_store1+0x4a/0x50
parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
? save_stack+0xb5/0xd0
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
? kasan_kmalloc+0xad/0xe0
? kmem_cache_alloc_trace+0xff/0x230
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? usb_probe_interface+0x1f5/0x440
? driver_probe_device+0x3ed/0x660
? build_feature_ctl+0xb10/0xb10 [snd_usb_audio]
? save_stack_trace+0x1b/0x20
? init_object+0x69/0xa0
? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio]
snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio]
? build_audio_procunit+0x890/0x890 [snd_usb_audio]
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? kmem_cache_alloc_trace+0xff/0x230
? usb_ifnum_to_if+0xbd/0xf0
snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio]
? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio]
usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio]
? __pm_runtime_idle+0x90/0x90
? kernfs_activate+0xa6/0xc0
? usb_match_one_id_intf+0xdc/0x130
? __pm_runtime_set_status+0x2d4/0x450
usb_probe_interface+0x1f5/0x440

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Remove spurious WARN_ON() at timer check

commit 43a3542870328601be02fcc9d27b09db467336ef upstream.

The use of snd_BUG_ON() in ALSA sequencer timer may lead to a spurious
WARN_ON() when a slave timer is deployed as its backend and a
corresponding master timer stops meanwhile.  The symptom was triggered
by syzkaller spontaneously.

Since the NULL timer is valid there, rip off snd_BUG_ON().

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: prevent UAF in snd_pcm_info

commit 362bca57f5d78220f8b5907b875961af9436e229 upstream.

When the device descriptor is closed, the `substream->runtime` pointer
is freed. But another thread may be in the ioctl handler, case
SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which
calls snd_pcm_info() which accesses the now freed `substream->runtime`.

Note: this fixes CVE-2017-0861

Signed-off-by: Robb Glasser <rglasser@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix missing error return in btrfs_drop_snapshot

commit e19182c0fff451e3744c1107d98f072e7ca377a0 upstream.

If btrfs_del_root fails in btrfs_drop_snapshot, we'll pick up the
error but then return 0 anyway due to mixing err and ret.

Fixes: 79787eaab4612 ("btrfs: replace many BUG_ONs with proper error handling")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix APIC page invalidation

commit b1394e745b9453dcb5b0671c205b770e87dedb87 upstream.

Implementation of the unpinned APIC page didn't update the VMCS address
cache when invalidation was done through range mmu notifiers.
This became a problem when the page notifier was removed.

Re-introduce the arch-specific helper and call it from ...range_start.

Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fixes: 38b9917350cb ("kvm: vmx: Implement set_apic_access_page_addr")
Fixes: 369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic v2")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Wanpeng Li <wanpeng.li@hotmail.com>
Tested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/PCI: Make broadcom_postcore_init() check acpi_disabled

commit ddec3bdee05b06f1dda20ded003c3e10e4184cab upstream.

acpi_os_get_root_pointer() may return a valid address even if acpi_disabled
is set, but the host bridge information from the ACPI tables is not going
to be used in that case and the Broadcom host bridge initialization should
not be skipped then, So make broadcom_postcore_init() check acpi_disabled
too to avoid this issue.

Fixes: 6361d72b04d1 (x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan)
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linux PCI <linux-pci@vger.kernel.org>
Link: https://lkml.kernel.org/r/3186627.pxZj1QbYNg@aspire.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: fix comparisons of ->pkey_algo

commit 54c1fb39fe0495f846539ab765925b008f86801c upstream.

->pkey_algo used to be an enum, but was changed to a string by commit
4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum").  But
two comparisons were not updated.  Fix them to use strcmp().

This bug broke signature verification in certain configurations,
depending on whether the string constants were deduplicated or not.

Fixes: 4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: reject invalid BIT STRING for subjectPublicKey

commit 0f30cbea005bd3077bd98cd29277d7fc2699c1da upstream.

Adding a specially crafted X.509 certificate whose subjectPublicKey
ASN.1 value is zero-length caused x509_extract_key_data() to set the
public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING
metadata byte.  Then, x509_cert_parse() called kmemdup() with that bogus
size, triggering the WARN_ON_ONCE() in kmalloc_slab().

This appears to be harmless, but it still must be fixed since WARNs are
never supposed to be user-triggerable.

Fix it by updating x509_cert_parse() to validate that the value has a
BIT STRING metadata byte, and that the byte is 0 which indicates that
the number of bits in the bitstring is a multiple of 8.

It would be nice to handle the metadata byte in asn1_ber_decoder()
instead.  But that would be tricky because in the general case a BIT
STRING could be implicitly tagged, and/or could legitimately have a
length that is not a whole number of bytes.

Here was the WARN (cleaned up slightly):

    WARNING: CPU: 1 PID: 202 at mm/slab_common.c:971 kmalloc_slab+0x5d/0x70 mm/slab_common.c:971
    Modules linked in:
    CPU: 1 PID: 202 Comm: keyctl Tainted: G    B            4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    task: ffff880033014180 task.stack: ffff8800305c8000
    Call Trace:
     __do_kmalloc mm/slab.c:3706 [inline]
     __kmalloc_track_caller+0x22/0x2e0 mm/slab.c:3726
     kmemdup+0x17/0x40 mm/util.c:118
     kmemdup include/linux/string.h:414 [inline]
     x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: add missing permission check for request_key() destination

commit 4dca6ea1d9432052afb06baf2e3ae78188a4410b upstream.

When the request_key() syscall is not passed a destination keyring, it
links the requested key (if constructed) into the "default" request-key
keyring.  This should require Write permission to the keyring.  However,
there is actually no permission check.

This can be abused to add keys to any keyring to which only Search
permission is granted.  This is because Search permission allows joining
the keyring.  keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING)
then will set the default request-key keyring to the session keyring.
Then, request_key() can be used to add keys to the keyring.

Both negatively and positively instantiated keys can be added using this
method.  Adding negative keys is trivial.  Adding a positive key is a
bit trickier.  It requires that either /sbin/request-key positively
instantiates the key, or that another thread adds the key to the process
keyring at just the right time, such that request_key() misses it
initially but then finds it in construct_alloc_key().

Fix this bug by checking for Write permission to the keyring in
construct_get_dest_keyring() when the default keyring is being used.

We don't do the permission check for non-default keyrings because that
was already done by the earlier call to lookup_user_key().  Also,
request_key_and_link() is currently passed a 'struct key *' rather than
a key_ref_t, so the "possessed" bit is unavailable.

We also don't do the permission check for the "requestor keyring", to
continue to support the use case described by commit 8bbf4976b59f
("KEYS: Alter use of key instantiation link-to-keyring argument") where
/sbin/request-key recursively calls request_key() to add keys to the
original requestor's destination keyring.  (I don't know of any users
who actually do that, though...)

Fixes: 3e30148c3d52 ("[PATCH] Keys: Make request-key create an authorisation key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: check for error from ASN1_OP_END__ACT actions

commit 81a7be2cd69b412ab6aeacfe5ebf1bb6e5bce955 upstream.

asn1_ber_decoder() was ignoring errors from actions associated with the
opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT,
ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT.  In practice, this
meant the pkcs7_note_signed_info() action (since that was the only user
of those opcodes).  Fix it by checking for the error, just like the
decoder does for actions associated with the other opcodes.

This bug allowed users to leak slab memory by repeatedly trying to add a
specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY).

In theory, this bug could also be used to bypass module signature
verification, by providing a PKCS#7 message that is misparsed such that
a signature's ->authattrs do not contain its ->msgdigest.  But it
doesn't seem practical in normal cases, due to restrictions on the
format of the ->authattrs.

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: fix out-of-bounds read when parsing indefinite length item

commit e0058f3a874ebb48b25be7ff79bc3b4e59929f90 upstream.

In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed
to the action functions before their lengths had been computed, using
the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH).  This resulted in
reading data past the end of the input buffer, when given a specially
crafted message.

Fix it by rearranging the code so that the indefinite length is resolved
before the action is called.

This bug was originally found by fuzzing the X.509 parser in userspace
using libFuzzer from the LLVM project.

KASAN report (cleaned up slightly):

    BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline]
    BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
    Read of size 128 at addr ffff880035dd9eaf by task keyctl/195

    CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:17 [inline]
     dump_stack+0xd1/0x175 lib/dump_stack.c:53
     print_address_description+0x78/0x260 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x23f/0x350 mm/kasan/report.c:409
     memcpy+0x1f/0x50 mm/kasan/kasan.c:302
     memcpy ./include/linux/string.h:341 [inline]
     x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
     asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447
     x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

    Allocated by task 195:
     __do_kmalloc_node mm/slab.c:3675 [inline]
     __kmalloc_node+0x47/0x60 mm/slab.c:3682
     kvmalloc ./include/linux/mm.h:540 [inline]
     SYSC_add_key security/keys/keyctl.c:104 [inline]
     SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/esrt: Use memunmap() instead of kfree() to free the remapping

commit 89c5a2d34bda58319e3075e8e7dd727ea25a435c upstream.

The remapping result of memremap() should be freed with memunmap(), not kfree().

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Move some sysfs files to be read-only by root

commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.

Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.

So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: align sata_device's rps_resp on a cacheline

commit c2e8fbf908afd81ad502b567a6639598f92c9b9d upstream.

The rps_resp buffer in ata_device is a DMA target, but it isn't
explicitly cacheline aligned. Due to this, adjacent fields can be
overwritten with stale data from memory on non-coherent architectures.
As a result, the kernel is sometimes unable to communicate with an SATA
device behind a SAS expander.

Fix this by ensuring that the rps_resp buffer is cacheline aligned.

This issue is similar to that fixed by Commit 84bda12af31f93 ("libata:
align ap->sector_buf") and Commit 4ee34ea3a12396f35b26 ("libata: Align
ata_device's id on a cacheline").

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: use dma_get_cache_alignment() as minimum DMA alignment

commit 90addc6b3c9cda0146fbd62a08e234c2b224a80c upstream.

In non-coherent DMA mode, kernel uses cache flushing operations to
maintain I/O coherency, so scsi's block queue should be aligned to the
value returned by dma_get_cache_alignment().  Otherwise, If a DMA buffer
and a kernel structure share a same cache line, and if the kernel
structure has dirty data, cache_invalidate (no writeback) will cause
data corruption.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
[hch: rebased and updated the comment and changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: dma-mapping: always provide dma_get_cache_alignment

commit 860dd4424f344400b491b212ee4acb3a358ba9d9 upstream.

Provide the dummy version of dma_get_cache_alignment that always returns
1 even if CONFIG_HAS_DMA is not set, so that drivers and subsystems can
use it without ifdefs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isa: Prevent NULL dereference in isa_bus driver callbacks

commit 5a244727f428a06634f22bb890e78024ab0c89f3 upstream.

The isa_driver structure for an isa_bus device is stored in the device
platform_data member of the respective device structure. This
platform_data member may be reset to NULL if isa_driver match callback
for the device fails, indicating a device unsupported by the ISA driver.

This patch fixes a possible NULL pointer dereference if one of the
isa_driver callbacks to attempted for an unsupported device. This error
should not occur in practice since ISA devices are typically manually
configured and loaded by the users, but we may as well prevent this
error from popping up for the 0day testers.

Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv: kvp: Avoid reading past allocated blocks from KVP file

commit 297d6b6e56c2977fc504c61bbeeaa21296923f89 upstream.

While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).

Fix this by reading the correct number of KVP records from file each time.

Signed-off-by: Paul Meyer <Paul.Meyer@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio: release virtio index when fail to device_register

commit e60ea67bb60459b95a50a156296041a13e0e380e upstream.

index can be reused by other virtio device.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: usb_8dev: cancel urb on -EPIPE and -EPROTO

commit 12147edc434c9e4c7c2f5fee2e5519b2e5ac34ce upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: esd_usb2: cancel urb on -EPIPE and -EPROTO

commit 7a31ced3de06e9878e4f9c3abe8f87d9344d8144 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: ems_usb: cancel urb on -EPIPE and -EPROTO

commit bd352e1adfe0d02d3ea7c8e3fb19183dc317e679 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: cancel urb on -EPIPE and -EPROTO

commit 6aa8d5945502baf4687d80de59b7ac865e9e666b upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: ratelimit errors if incomplete messages are received

commit 8bd13bd522ff7dfa0eb371921aeb417155f7a3be upstream.

Avoid flooding the kernel log with "Formate error", if incomplete message
are received.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()

commit e84f44eb5523401faeb9cc1c97895b68e3cfb78d upstream.

The conditon in the while-loop becomes true when actual_length is less than
2 (MSG_HEADER_LEN). In best case we end up with a former, already
dispatched msg, that got msg->len greater than actual_length. This will
result in a "Format error" error printout.

Problem seen when unplugging a Kvaser USB device connected to a vbox guest.

warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: free buf in error paths

commit 435019b48033138581a6171093b181fc6b4d3d30 upstream.

The allocated buffer was not freed if usb_submit_urb() failed.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: ti_hecc: Fix napi poll return value for repoll

commit f6c23b174c3c96616514827407769cbcfc8005cf upstream.

After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.

Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: renesas_usb3: fix number of the pipes

commit a58204ab91ad8cae4d8474aa0ba5d1fc504860c9 upstream.

This controller on R-Car Gen3 has 6 pipes that included PIPE 0 for
control actually. But, the datasheet has error in writing as it has
31 pipes. (However, the previous code defined 30 pipes wrongly...)

Anyway, this patch fixes it.

Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.68

xen-netfront: avoid crashing on resume after a failure in talk_to_netback()

commit d86b5672b1adb98b4cdd6fbf0224bbfb03db6e2e upstream.

Unavoidable crashes in netfront_resume() and netback_changed() after a
previous fail in talk_to_netback() (e.g. when we fail to read MAC from
xenstore) were discovered. The failure path in talk_to_netback() does
unregister/free for netdev but we don't reset drvdata and we try accessing
it after resume.

Fix the bug by removing the whole xen device completely with
device_unregister(), this guarantees we won't have any calls into netfront
after a failure.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: fix incorrect updating of offset

commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream.

The variable temp is incorrectly being updated, instead it should
be offset otherwise the loop just reads the same capability value
and loops forever.  Thanks to Alan Stern for pointing out the
correct fix to my original fix.  Fix also cleans up clang warning:

drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp'
is never read

Fixes: d49d43174400 ("USB: misc ehci updates")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbfs: Filter flags passed in from user space

commit 446f666da9f019ce2ffd03800995487e79a91462 upstream.

USBDEVFS_URB_ISO_ASAP must be accepted only for ISO endpoints.
Improve sanity checking.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: devio: Prevent integer overflow in proc_do_submiturb()

commit 57999d1107c1e60c2ca7088f2ac0f819e2f554b3 upstream.

There used to be an integer overflow check in proc_do_submiturb() but
we removed it.  It turns out that it's still required.  The
uurb->buffer_length variable is a signed integer and it's controlled by
the user.  It can lead to an integer overflow when we do:

num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);

If we strip away the macro then that line looks like this:

num_sgs = (uurb->buffer_length + USB_SG_SIZE - 1) / USB_SG_SIZE;
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It's the first addition which can overflow.

Fixes: 1129d270cbfb ("USB: Increase usbfs transfer limit")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Increase usbfs transfer limit

commit 1129d270cbfbb7e2b1ec3dede4a13930bdd10e41 upstream.

Promote a variable keeping track of USB transfer memory usage to a
wider data type and allow for higher bandwidth transfers from a large
number of USB devices connected to a single host.

Signed-off-by: Mateusz Berezecki <mateuszb@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Add type-specific length check of BOS descriptors

commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream.

As most of BOS descriptors are longer in length than their header
'struct usb_dev_cap_header', comparing solely with it is not sufficient
to avoid out-of-bounds access to BOS descriptors.

This patch adds descriptor type specific length check in
usb_get_bos_descriptor() to fix the issue.

Signed-off-by: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix panic in xhci_free_virt_devices_depth_first

commit 80e457699a8dbdd70f2d26911e46f538645c55fc upstream.

Check vdev->real_port 0 to avoid panic
[    9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108
[    9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570
[    9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8
[    9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0
[    9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8
[    9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70
[    9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108
[    9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40
[    9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120
[    9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210
[    9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0
[    9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488
[    9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8
[    9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490
[    9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0
[    9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100
[    9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50

The problem can occur if xhci_plat_remove() is called shortly after
xhci_plat_probe(). While xhci_free_virt_devices_depth_first been
called before the device has been setup and get real_port initialized.
The problem occurred on Hikey960 and was reproduced by Guenter Roeck
on Kevin with chromeos-4.4.

Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first")
Cc: Guenter Roeck <groeck@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Fan Ning <fanning4@hisilicon.com>
Signed-off-by: Li Rui <lirui39@hisilicon.com>
Signed-off-by: yangdi <yangdi10@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Cycle HUB power when initialization fails

commit 973593a960ddac0f14f0d8877d2d0abe0afda795 upstream.

Sometimes the USB device gets confused about the state of the initialization and
the connection fails. In particular, the device thinks that it's already set up
and running while the host thinks the device still needs to be configured. To
work around this issue, power-cycle the hub's output to issue a sort of "reset"
to the device. This makes the device restart its state machine and then the
initialization succeeds.

This fixes problems where the kernel reports a list of errors like this:

usb 1-1.3: device not accepting address 19, error -71

The end result is a non-functioning device. After this patch, the sequence
becomes like this:

usb 1-1.3: new high-speed USB device number 18 using ci_hdrc
usb 1-1.3: device not accepting address 18, error -71
usb 1-1.3: new high-speed USB device number 19 using ci_hdrc
usb 1-1.3: device not accepting address 19, error -71
usb 1-1-port3: attempt power cycle
usb 1-1.3: new high-speed USB device number 21 using ci_hdrc
usb-storage 1-1.3:1.2: USB Mass Storage device detected

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: Update kerneldoc for sync_file_create

commit 24a367348a017555f982a9ee137070a7a821fa97 upstream.

This was missed when adding a dma_fence_get call. While at it also
remove the kerneldoc for the static inline helper - no point
documenting internals down to every detail.

Fixes: 30cd85dd6edc ("dma-buf/sync_file: hold reference to fence when creating sync_file")
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209185309.1682-3-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sync_file: hold reference to fence when creating sync_file

commit 30cd85dd6edc86ea8d8589efb813f1fad41ef233 upstream.

fence referencing was out of balance. It was not taking any ref to the
fence at creating time, but it was putting a reference when freeing the
sync file.

This patch fixes the balancing issue by getting a reference for the fence
when creating the sync_file.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476899313-22241-1-git-send-email-gustavo@padovan.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw_sync: force signal all unsignaled fences on dying timeline

commit ea4d5a270b57fa8d4871f372ca9b97b7697fdfda upstream.

To avoid hanging userspace components that might have been waiting on the
active fences of the destroyed timeline we need to signal with error all
remaining fences on such timeline.

This restore the default behaviour of the Android sw_sync framework, which
Android still relies on. It was broken on the dma fence conversion a few
years ago and never fixed.

v2: Do not bother with cleanup do the list (Chris Wilson)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907190246.16425-2-gustavo@padovan.org
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-fence: Introduce drm_fence_set_error() helper

commit a009e975da5c7d42a7f5eaadc54946eb5f76c9af upstream.

The dma_fence.error field (formerly known as dma_fence.status) is an
optional field that may be set by drivers before calling
dma_fence_signal(). The field can be used to indicate that the fence was
completed in err rather than with success, and is visible to other
consumers of the fence and to userspace via sync_file.

This patch renames the field from status to error so that its meaning is
hopefully more clear (and distinct from dma_fence_get_status() which is
a composite between the error state and signal state) and adds a helper
that validates the preconditions of when it is suitable to adjust the
error field.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-3-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-fence: Wrap querying the fence->status

commit d6c99f4bf093a58d3ab47caaec74b81f18bc4e3f upstream.

The fence->status is an optional field that is only valid once the fence
has been signaled. (Driver may fill the fence->status with an error code
prior to calling dma_fence_signal().) Given the restriction upon its
validity, wrap querying of the fence->status into a helper
dma_fence_get_status().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-2-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-fence: Clear fence->status during dma_fence_init()

commit 83dd1376fd92f33bdeca9e83d479534a4e7f870b upstream.

As the fence->status is an optional field that may be set before
dma_fence_signal() is called to convey that the fence completed with an
error, we have to ensure that it is always set to zero on initialisation
so that the typical use (i.e. unset) always flags a successful completion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-1-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw_sync: clean up list before signaling the fence

commit 3792b7c1a70815fe4e954221c096f9278638fd21 upstream.

If userspace already dropped its own reference by closing the sw_sync
fence fd we might end up in a deadlock where
dma_fence_is_signaled_locked() will trigger the release of the fence and
thus try to hold the lock to remove the fence from the list.

dma_fence_is_signaled_locked() tries to release/free the fence and hold
the lock in the process.

We fix that by changing the order operation and clean up the list and
rb-tree first.

v2: Drop fence get/put dance and manipulate the list first (Chris Wilson)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-2-gustavo@padovan.org
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw_sync: move timeline_fence_ops around

commit 150b6a9d7d6fffb95c0a5349960a10569e8218b5 upstream.

We are going to use timeline_fence_signaled() in a internal function in
the next commit.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-1-gustavo@padovan.org
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: Use an rbtree to sort fences in the timeline

commit f1e8c67123cf171e2b0357e885e426328b241d7d upstream.

Reduce the list iteration when incrementing the timeline by storing the
fences in increasing order.

v2: Prevent spinlock recursion on free during create
v3: Fixup rebase conflict inside comments that escaped the compiler.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629211253.22766-1-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sw-sync: Fix locking around sync_timeline lists

commit d3862e44daa7a0c94d2f6193502a8c49379acfce upstream.

The sync_pt were not adding themselves atomically to the timeline lists,
corruption imminent.  Only a single list is required to track the
unsignaled sync_pt, so reduce it and rename the lock more appropriately
along with using idiomatic names to distinguish a list from links along
it.

v2: Prevent spinlock recursion on free during create (next patch) and
fixup crossref in kerneldoc

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629210532.5617-1-chris@chris-wilson.co.uk
[s/dma_fence/fence/g - gregkh]
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>