OSDN Git Service
Christian König [Wed, 6 Mar 2013 11:08:54 +0000 (12:08 +0100)]
radeon/llvm: fix trivial warnings
Signed-off-by: Christian König <christian.koenig@amd.com>
Christian König [Wed, 6 Mar 2013 10:49:53 +0000 (11:49 +0100)]
radeonsi: fix trivial warning
Signed-off-by: Christian König <christian.koenig@amd.com>
Eric Anholt [Tue, 29 Jan 2013 00:59:29 +0000 (11:59 +1100)]
intel: Improve the matching (more formats!) for TexImage from PBOs.
Mesa core is the place for encoding what format/type matches a mesa
format, so rely on that.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Eric Anholt [Mon, 28 Jan 2013 06:44:17 +0000 (17:44 +1100)]
intel: Improve the test for readpixels blit path format checking.
We were allowing things like copying RG1616 to a user's ARGB8888
format, while we were denying anything that wasn't ARGB8888 or
RGB565.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Eric Anholt [Mon, 28 Jan 2013 00:32:49 +0000 (11:32 +1100)]
intel: Fold intel_region_copy() into its one caller.
This is similar code to intel_miptree_copy_slice, but the knobs
are all set differently.
v2: fix whitespace
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Eric Anholt [Sun, 27 Jan 2013 22:14:42 +0000 (09:14 +1100)]
intel: Transition intel_region_map() to being a miptree operation.
I'm trying to move us away from the region structure, and all the
callers are currently dereferencing a miptree to get the region.
In this change, the map_refcount is dropped. However, the bo->virtual is
itself map refcounted, so that's already dealt with.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Eric Anholt [Sun, 27 Jan 2013 21:57:15 +0000 (08:57 +1100)]
intel: Remove num_mapped_regions tracking.
The point of tracking the value was removed in February 2012
(
65b096aeddd9b45ca038f44cc9adfff86c8c48b2), and this should have
been removed at the same time.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Eric Anholt [Sun, 27 Jan 2013 19:37:43 +0000 (05:37 +1000)]
intel: Remove the struct intel_region reuse hash table.
I don't see any reason for it -- it was introduced with the DRI2
invalidate work by krh in 2010 with no explanation. I suspect it was
something about wanting the same drm_intel_bo struct underneath multiple
openings of the BO within one process, but that's covered by libdrm at
this point. As far as the struct region goes, it is not threadsafe, so
multiple contexts sharing a region could have mixed up the map_count and
assertion failed or worse.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
José Fonseca [Tue, 5 Mar 2013 22:46:38 +0000 (22:46 +0000)]
scons: Provide shorthand aliases for software winsyses.
José Fonseca [Tue, 5 Mar 2013 22:46:01 +0000 (22:46 +0000)]
scons: Fix llvm-config not found error message.
"% llvm_version" is bogus copy'n'past cruft.
Ian Romanick [Tue, 5 Mar 2013 22:51:26 +0000 (14:51 -0800)]
mesa: Modify candidate search string
Several commits on master for the 9.1 branch had "NOTE" messages in a
slightly different format.
NOTE: This is a candidate for stable branches
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Eric Anholt [Sat, 23 Feb 2013 00:09:19 +0000 (16:09 -0800)]
mesa: Remove the special enum for _mesa_error debug output.
Now all the per-message enums from mtypes are gone. Now we can extend
unique message IDs into all generators of debug output without having to
update mtypes.h for each one.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Sat, 23 Feb 2013 00:07:47 +0000 (16:07 -0800)]
mesa: Remove the enum for the oom-within-debug-output case.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 23:59:48 +0000 (15:59 -0800)]
mesa: Remove now-unused gl_winsys_error and gl_shader_error enums.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 23:57:25 +0000 (15:57 -0800)]
mesa: Report ARB_debug_output for both shader errors and warnings.
This ends up reusing the dynamic ID support, so a silly enum gets to go
away. We don't assign good IDs to different messages yet, but at least
that's tractable now.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 22:39:15 +0000 (14:39 -0800)]
intel: Add missing perf debug for a stall on mapping a BO.
I was testing the ARB_debug_output code and wrote an obvious sample that
should have hit this, and got confused that my ARB_debug_output was
broken.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 21:15:20 +0000 (13:15 -0800)]
i965: Make perf_debug() output to GL_ARB_debug_output in a debug context.
I tried to ensure that performance in the non-debug case doesn't change
(we still just check one condition up front), and I think the impact is
small enough in the debug context case to warrant including all of it.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 20:56:13 +0000 (12:56 -0800)]
intel: Finish renaming fallback_debug() to perf_debug().
They're about to change to handle GL_ARB_debug_output, so just make one
function.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 21:03:51 +0000 (13:03 -0800)]
intel: Hook up the WARN_ONCE macro to GL_ARB_debug_output.
This doesn't provide detailed error type information, but it's important
to get these relatively severe but rare error messages out to the
developer through whatever mechanism they are using.
v2: Rebase on new WARN_ONCE additions.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
Eric Anholt [Fri, 22 Feb 2013 18:43:40 +0000 (10:43 -0800)]
mesa: Add support for GL_ARB_debug_output with dynamic ID allocation.
We can emit messages now without always having to use the same ID for
each, or having a giant table of all possible errors in mtypes.h.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Thu, 12 Jul 2012 17:22:15 +0000 (10:22 -0700)]
mesa: Merge handling of application-provided and built-in error sources.
I want to have dynamic IDs so that we don't need to add to mtypes.h for
every error we might want to add. To do so, I need to get rid of the
static arrays and actually support all the crazy filtering of dynamic IDs
that we already support for application-provided error sources.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Sat, 23 Feb 2013 01:08:28 +0000 (17:08 -0800)]
mesa: Fix _mesa_problem() on context destroy after application debug output
This was apparently not noticed because we don't have any testing of
application-generated debug output. However, as I'm changing the
GL-generated debug output to use the same path as
application/middleware-generated debug output, this obviously became an
issue.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 23:06:19 +0000 (15:06 -0800)]
mesa: Move debug type/severity enums to mesa core.
These will get reused by new ARB_debug_output messages in drivers/core,
instead of having the caller pass GL enums and have us immediately
switch-statement those into enums.
Add source enums will be handled in the next commit, because the way
different sources are handled at the moment is pretty strange.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Fri, 22 Feb 2013 22:47:15 +0000 (14:47 -0800)]
mesa: Replace open-coded _mesa_lookup_enum_by_nr().
The new one doesn't have the same behavior for GL_NO_ERROR, but we don't
produce errors with GL_NO_ERROR as the error type.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Eric Anholt [Thu, 12 Jul 2012 17:21:13 +0000 (10:21 -0700)]
mesa: Remove extra #define MAXSTRING duplicating MAX_DEBUG_MESSAGE_LENGTH.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Marcin Slusarz [Sat, 16 Feb 2013 22:25:08 +0000 (23:25 +0100)]
dri/nouveau: NV17_3D class is not available for NV1a chipset
Should fix https://bugs.freedesktop.org/show_bug.cgi?id=60510
Note: this is a candidate for the stable branches
Acked-by: Francisco Jerez <currojerez@riseup.net>
Roland Scheidegger [Tue, 5 Mar 2013 16:24:32 +0000 (17:24 +0100)]
tgsi: handle projection modifier for array textures.
This partly reverts
6ace2e41da7dded630d932d03bacb7e14a93d47a.
Apparently with GL_MESA_texture_array fixed-function texturing
with texture arrays is possible, and hence we have to handle TXP.
(Though noone seems to know the semantics, softpipe now does what
it did before, which is to NOT project the array coord, llvmpipe
for instance however indeed does project the array coord. Unlike
before it will project the comparison coord for shadow1d array, as
that clearly was an error.)
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=61828.
Reviewed-by: Brian Paul <brianp@vmware.com>
Roland Scheidegger [Tue, 5 Mar 2013 01:02:13 +0000 (02:02 +0100)]
st/mesa: translate ir offset parameters for non-TXF opcodes.
Otherwise the state tracker will crash if the texture instructions
have offsets.
Reviewed-by: Brian Paul <brianp@vmware.com>
Matt Turner [Mon, 4 Mar 2013 18:29:57 +0000 (10:29 -0800)]
configure.ac: Remove stale comment about --x-* arguments.
Should have been removed with
e273ed37.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Matt Turner [Mon, 4 Mar 2013 18:23:54 +0000 (10:23 -0800)]
configure.ac: Don't check for X11 unconditionally.
X11 is already checked conditionally below.
Fixes OSMesa-only configurations to not require X11.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Alan Hourihane [Tue, 5 Mar 2013 12:05:26 +0000 (12:05 +0000)]
Add missing GL_TEXTURE_CUBE_MAP entry in _mesa_legal_texture_dimensions
This was hit on the glTexStorage2D() path.
Note: this is a candidate for the stable branches
Signed-off-by: Alan Hourihane <alanh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Jon TURNEY [Fri, 1 Mar 2013 15:21:07 +0000 (15:21 +0000)]
Fix out-of-tree build of 'make check' in src/mesa/main/tests
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Dave Airlie [Mon, 4 Mar 2013 07:18:24 +0000 (07:18 +0000)]
u_blitter: don't create illegal shaders for 1D/3D/RECT/CUBE MSAA
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Martin [Thu, 28 Feb 2013 18:39:06 +0000 (19:39 +0100)]
Fix build of swrast only without libdrm
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Brian Paul [Mon, 4 Mar 2013 15:41:45 +0000 (08:41 -0700)]
mesa: flush current state when querying GL_EDGE_FLAG
Fixes http://bugs.freedesktop.org/show_bug.cgi?id=61395
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Jakub Bogusz [Mon, 4 Mar 2013 06:51:01 +0000 (22:51 -0800)]
vdpau-softpipe: Build correct source file - vl_winsys_xsp.c
Copy-and-paste problem introduced by commit
7f24483e.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Fri, 1 Mar 2013 23:23:53 +0000 (15:23 -0800)]
i965: Fix Crystal Well PCI IDs.
The second digit was off by one, which meant we accidentally treated
GTn as GT(n-1). This also meant no support for GT1 at all.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Vincent Lejeune [Sun, 3 Mar 2013 20:35:38 +0000 (21:35 +0100)]
r600g: Check comp_mask before merging export instructions
Fixes a llvm uncovered (rare) bug where consecutive exports were
merged even if they have incompatible mask.
Vadim Girlin [Tue, 26 Feb 2013 16:50:25 +0000 (20:50 +0400)]
r600g: fix check_and_set_bank_swizzle for cayman
Tested-by: Vincent Lejeune <vljn at ovi.com>
Reviewed-by: Vincent Lejeune <vljn at ovi.com>
Brian Paul [Sat, 2 Mar 2013 00:36:34 +0000 (17:36 -0700)]
st/mesa: add switch case for ir_txf_ms to silence warning
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Brian Paul [Sat, 2 Mar 2013 00:36:24 +0000 (17:36 -0700)]
mesa: add switch case for ir_txf_ms to silence warning
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Wed, 27 Feb 2013 21:35:05 +0000 (13:35 -0800)]
i965: Pull query BO reallocation out into a helper function.
We'll want to reuse this for non-occlusion queries in the future.
Plus, it's a single logical task, so having it as a helper function
clarifies the code somewhat.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Tue, 26 Feb 2013 07:33:24 +0000 (23:33 -0800)]
i965: Replace the global brw->query.bo variable with query->bo.
Again, eliminating a global variable in favor of a per-query object
variable will help in a future where we have more queries in hardware.
Personally, I find this clearer: there's just the query object's BO,
rather than two variables that usually shadow each other.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Tue, 26 Feb 2013 07:31:10 +0000 (23:31 -0800)]
i965: Turn if (query->bo) into an assertion.
The code a few lines above calls brw_emit_query_begin() if !query->bo,
and that creates query->bo. So it should always be non-NULL.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Tue, 26 Feb 2013 07:17:57 +0000 (23:17 -0800)]
i965: Unify query object BO reallocation code.
If we haven't allocated a BO yet, we need to do that. Or, if there
isn't enough room to write another pair of values, we need to gather up
the existing results and start a new one. This is simple enough.
However, the old code was awkwardly split into two blocks, with a
write_depth_count() placed in the middle. The new depth count isn't
relevant to gathering the old BO's data, so that can go after the
reallocation is done. With the two blocks adjacent, we can merge them.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Tue, 26 Feb 2013 06:30:21 +0000 (22:30 -0800)]
i965: Use query->last_index instead of the global brw->query.index.
Since we already have an index in the brw_query_object, there's no need
to also keep a global variable that shadows it.
Plus, if we ever add support for more types of queries that still need
the per-batch before/after treatment we do for occlusion queries, we
won't be able to use a single global variable. In contrast, per-query
object variables will work fine.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Tue, 26 Feb 2013 02:05:55 +0000 (18:05 -0800)]
i965: Remove brw_query_object::first_index field as it's always 0.
brw->query.index is initialized to 0 just a few lines before it's
copied to first_index.
Presumably the idea here was to reuse the query BO for subsequent
queries of the same type, but since that doesn't happen, there's no need
to have the extra code complexity.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Mon, 25 Feb 2013 23:22:02 +0000 (15:22 -0800)]
i965: Add a pile of comments to brw_queryobj.c.
This code was really difficult to follow, for a number of reasons:
- Queries were handled in four different ways (TIMESTAMP writes a single
value, TIME_ELAPSED writes a single pair of values, occlusion queries
write pairs of values for the start and end of each batch, and other
queries are done entirely in software. It turns out that there are
very good reasons each query is handled the way it is, but
insufficient comments explaining the rationale.
- It wasn't immediately obvious which functions were driver hooks
and which were helper functions. For example, brw_query_begin() is
a driver hook that implements glBeginQuery() for all query types, but
the similarly named brw_emit_query_begin() is a helper function that's
only relevant for occlusion queries.
Extra explanatory comments should save me and others from constantly
having to ask how this code works and why various query types are
handled differently.
v2: Incorporate Eric's feedback: change "as soon as possible" to "the
results will be present when mapped."
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Mon, 25 Feb 2013 21:56:01 +0000 (13:56 -0800)]
i965: Write TIMESTAMP query values into the first buffer element.
For timestamp queries, we just write a single value to a BO. The
natural place to write that is element 0, so we should do that.
Previously, we wrote it into element 1 (the second slot) leaving
element 0 filled with garbage.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Mon, 25 Feb 2013 20:22:29 +0000 (12:22 -0800)]
i965: Implement the new QueryCounter() hook.
This moves the GL_TIMESTAMP handling out of EndQuery.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Mon, 25 Feb 2013 19:21:17 +0000 (11:21 -0800)]
mesa: Add a new QueryCounter() hook for TIMESTAMP queries.
In OpenGL, most queries record statistics about operations performed
between a defined beginning and ending point. However, TIMESTAMP
queries are different: they immediately return a single value, and there
is no start/stop mechanism.
Previously, Mesa implemented TIMESTAMP queries by calling EndQuery
without first calling BeginQuery. Apparently this is DirectX
convention, and Gallium followed suit. I personally find the asymmetry
jarring, however---having BeginQuery and EndQuery handle a different set
of enum values looks like a bug. It's also a bit confusing to mix the
one-shot query with the start/stop model.
So, add a new QueryCounter driver hook for implementing TIMESTAMP. For
now, fall back to EndQuery to support drivers that don't do the new
mechanism.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Roland Scheidegger [Fri, 1 Mar 2013 22:27:41 +0000 (23:27 +0100)]
tgsi: add texel offsets and derivatives to sampler interface
Something I never got around to implement, but this is the tgsi execution
side for implementing texel offsets (for ordinary texturing) and explicit
derivatives for sampling (though I guess the ordering of the components
for the derivs parameters is debatable).
There is certainly a runtime cost associated with this.
Unless there are different interfaces used depending on the "complexity"
of the texture instructions, this is impossible to avoid.
Offsets are always active (I think checking if they are active or not is
probably not worth it since it should mostly be an add), whereas the
sampler_control is extended for explicit derivatives.
For now softpipe (the only user of this) just drops all those new values
on the floor (which is the part I never implemented...).
Additionally this also fixes (discovered by accident) inconsistent
projective divide for the comparison coord - the code did do the
projection for shadow2d targets, but not shadow1d ones. This also
drops checking for projection modifier on array targets, since they
aren't possible in any extension I know of (hence we don't actually
know if the array layer should also be divided or not).
Reviewed-by: Brian Paul <brianp@vmware.com>
Roland Scheidegger [Sat, 2 Mar 2013 01:29:22 +0000 (02:29 +0100)]
draw: additional fix for the no-position case with llvm
Similar fix to what is done for the non-llvm case, we could otherwise still
hit the stages (near certainly with gs) which crash. It is probably a much
better idea to skip trying to draw at that point anyway.
Reviewed-by: Brian Paul <brianp@vmware.com>
Roland Scheidegger [Sat, 2 Mar 2013 01:49:28 +0000 (02:49 +0100)]
draw: fix no position output in non-llvm pipeline.
It seems easiest (and best) if we simply skip all the later stages
(after stream output).
(This is different to the llvm case at least for now where we will
simply try to render garbage, though both behaviors should be correct.)
Fixes piglit glsl-1.40-tf-no-position with softpipe.
Reviewed-by: Brian Paul <brianp@vmware.com>
Roland Scheidegger [Fri, 1 Mar 2013 13:50:40 +0000 (14:50 +0100)]
draw/llvm: skip clipping and viewport transform if there's no position output
With glsl 1.40 writing position is not required (useful for transform
feedback, though in fact it's still possible to rasterize such geometry
even if the results aren't too well defined).
Prevents crashes in that case. Fixes piglit glsl-1.40-tf-no-position.
Not quite sure this is 100% correct as it also skips clipdistance
clipping which could still work (but not sure if the result would
really be needed?)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com
Reviewed-by: Brian Paul <brianp@vmware.com>
Roland Scheidegger [Fri, 1 Mar 2013 14:32:03 +0000 (15:32 +0100)]
llvmpipe: don't assert on illegal surface creation.
Since
c8eb2d0e829d0d2aea6a982620da0d3cfb5982e2 llvmpipe checks if it's
actually legal to create a surface. The opengl state tracker doesn't quite
obey this so for now just warn instead of assert.
Also warn instead of disabled assert when creating sampler views
(same reasoning).
Addresses https://bugs.freedesktop.org/show_bug.cgi?id=61647.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Roland Scheidegger [Fri, 1 Mar 2013 13:50:32 +0000 (14:50 +0100)]
llvmpipe: bump glsl version to 140
texel offsets should have been the last missing feature for 130, and in
fact 140 as well (last there were texture buffers). In any case we still
don't do OpenGL 3.0 (missing MSAA which will be difficult,
plus EXT_packed_float, ARB_depth_buffer_float and EXT_framebuffer_sRGB).
v2: bump to 140 instead - we have everything except we crash when not writing
to gl_Position (but softpipe crashes as well) so let's just say this is a bug
instead. Also (by Dave Airlie's suggestion) update llvm-todo.txt.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Roland Scheidegger [Fri, 1 Mar 2013 01:25:13 +0000 (02:25 +0100)]
gallivm: add support for texel offsets for ordinary texturing.
This was previously only handled for texelFetch (much easier).
Depending on the wrap mode this works slightly differently (for somewhat
efficient implementation), hence have to do that separately in all roughly
137 places - it is easy if we use fixed point coords for wrapping, however
some wrapping modes are near impossible with fixed point (the repeat stuff)
hence we have to normalize the offsets if we can't do the wrapping in
unnormalized space (which is a division which is slow but should still be
much better than the alternative, which would be integer modulo for wrapping
which is just unusable). This should still give accurate results in all
cases that really matter, though it might be not quite conformant behavior
for some apis (but we have much worse problems there anyway even without
using offsets).
(Untested, no piglit test.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Brian Paul [Fri, 1 Mar 2013 23:53:22 +0000 (16:53 -0700)]
svga: always link with C++
Even when we don't have LLVM since there's other C++ code
in the resulting DRI driver object.
Note: This is a candidate for the stable branches.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Brian Paul [Fri, 1 Mar 2013 22:16:15 +0000 (15:16 -0700)]
st/mesa: convert ir_triop_lrp to TGSI_OPCODE_LRP
AFAICT, all gallium drivers implement TGSI_OPCODE_LRP.
Tested with softpipe, llvmpipe, svga drivers.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Chris Forbes [Fri, 1 Mar 2013 23:01:24 +0000 (12:01 +1300)]
docs: Mark some things done in GL3.txt
Martin Andersson [Fri, 1 Mar 2013 21:34:28 +0000 (22:34 +0100)]
winsys/radeon: Only add bo to hash table when creating flink
The problem is that we mix bo handles and flinked names in the hash
table. Because kms type handles are not flinked they should not be
added to the hash table. If we do that we will sooner or later
get a situation where we will overwrite a correct entry because
the bo handle was the same as a flinked name.
Note: this is a candidate for the stable branches.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Forbes [Sat, 29 Dec 2012 08:28:57 +0000 (21:28 +1300)]
i965: enable ARB_texture_multisample on Gen6+
V2: Works on Ivy Bridge now too, so this can be 6+.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Chris Forbes [Sat, 29 Dec 2012 07:12:26 +0000 (20:12 +1300)]
i965/fs: add support for ir_txf_ms on Gen6+
On Gen6, lower this to `ld` with lod=0 and an extra sample_index
parameter.
On Gen7, use `ld2dms`. We don't support CMS yet for multisample
textures, so we just hardcode MCS=0. This is ignored for IMS and UMS
surfaces.
Note: If we do end up emitting specialized shaders based on the MSAA
layout, we can emit a slightly shorter message here in the UMS case.
Note: According to the PRM, `ld2dms` takes one more parameter, lod.
However, it's always zero, and including it would make the message too
long for SIMD16, so we just omit it.
V2: Reworked completely, added support for Gen7.
V3: - Introduce sample_index parameter rather than reusing lod
- Removed spurious whitespace change
- Clarify commit message
V4: - Fix comment style
- Emit SHADER_OPCODE_TXF_MS on Gen6. This was benignly wrong since
it lowers to `ld` anyway on this gen, but still wrong.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Chris Forbes [Sat, 29 Dec 2012 07:12:26 +0000 (20:12 +1300)]
i965/vs: add support for ir_txf_ms on Gen6+
On Gen6, lower this to `ld` with lod=0 and an extra sample_index
parameter.
On Gen7, use `ld2dms`. This takes an additional MCS parameter to support
compressed multisample surfaces, but we're not enabling them for
multisample textures for now, so it's always ignored and can be safely
omitted.
V2: Reworked completely, added support for Gen7.
V3: - Use new sample_index, sample_index_type rather than reusing lod
- Clarify commit message.
V4: - Fix comment style
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Chris Forbes [Thu, 24 Jan 2013 08:35:15 +0000 (21:35 +1300)]
i965: add a new virtual opcode: SHADER_OPCODE_TXF_MS
This is very similar to the TXF opcode, but lowers to `ld2dms` rather
than `ld` on Gen7.
V4: - add SHADER_OPCODE_TXF_MS to is_tex() functions, so regalloc thinks
it actually writes the correct number of registers. Otherwise in
nontrivial shaders some of the registers tend to get clobbered,
producing bad results.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Chris Forbes [Thu, 24 Jan 2013 07:05:09 +0000 (20:05 +1300)]
i965: take the target into account for Gen7 MSAA modes
Gen7 has an erratum affecting the ld_mcs message, making it unsafe to
use when the surface doesn't have an associated MCS.
From the Ivy Bridge PRM, Vol4 Part1 p77 ("MCS Enable"):
"If this field is disabled and the sampling engine <ld_mcs>
message is issued on this surface, the MCS surface may be
accessed. Software must ensure that the surface is defined
to avoid GTT errors."
To allow the shader to treat all surfaces uniformly, force UMS if the
surface is to be used as a multisample texture, even if CMS would have
been possible.
V3: - Quoted erratum text
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Chris Forbes [Sat, 22 Dec 2012 10:27:24 +0000 (23:27 +1300)]
i965: Support multisampling in surface_state for textures
The surface_state setup for renderbuffers already worked; only the
texturing side needed work. BLORP does something similar, but does its
own surface_state setup.
On Gen6, we just need to set the correct sample count.
On Gen7: - set the correct sample count
- set the correct layout mode
- set GEN7_SURFACE_ARYSPC_LOD0 if it's set in the miptree.
V2: - Clarify commit message
- Rebased onto Paul's physical/logical dims cleanup
- Added Gen7 support
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Chris Forbes [Sun, 16 Dec 2012 06:50:26 +0000 (19:50 +1300)]
i965: add support for multisample textures
V2: - Fix for state moving from texobj to image
- Rebased onto Paul's logical/physical cleanup
- Fixed missing quantization of sample count
- Fold in IMS renderbuffer wrapper fixes from later in the series
- Use correct physical slice offset for UMS/CMS surfaces on Gen7
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Chris Forbes [Sat, 24 Nov 2012 08:47:46 +0000 (21:47 +1300)]
mesa: implement TexImage*Multisample
V2: - fix formatting issues
- generate GL_OUT_OF_MEMORY if teximage cannot be allocated
- fix for state moving from texobj to image
V3: - remove ridiculous stencil hack
- alter format check to not allow a base format of STENCIL_INDEX
- allow width/height/depth to be zero, to deallocate the texture
- dont forget to call _mesa_update_fbo_texture
V4: - fix indentation
- don't throw errors on proxy texture targets
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Chris Forbes [Sun, 16 Dec 2012 07:58:00 +0000 (20:58 +1300)]
mesa: support multisample textures in framebuffer completeness check
- sample count must be the same on all attachments
- fixedsamplepositions must be the same on all attachments
(renderbuffers have fixedsamplepositions=true implicitly; only
multisample textures can choose to have it false)
V2: - fix wrapping to 80 columns, debug message, fix for state moving
from texobj to image.
- stencil texturing tweaks tidied up and folded in here.
V3: - Removed silly stencil hacks entirely; the extension doesn't
actually make stencil-only textures legal at all.
- Moved sample count / fixed sample locations checks into
existing attachment-type-specific blocks, as suggested by Eric
V4: - Removed stencil hacks which were missed in V3 (thanks Eric)
- Don't move the declaration of texImg; only required pre-V3.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
[V2] Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Wed, 5 Dec 2012 03:27:42 +0000 (16:27 +1300)]
i965: expose sample positions
Moves the definition of the sample positions out of
gen6_emit_3dstate_multisample, and unpacks them in
gen6_get_sample_position.
V2: Be consistent about `sample position` rather than `location`.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Thu, 29 Nov 2012 09:24:43 +0000 (22:24 +1300)]
i965: add support for sample mask on Gen6+
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Fri, 30 Nov 2012 08:22:14 +0000 (21:22 +1300)]
mesa: implement sample mask
V2: - fix multiline comment style
- stop using ASSERT_OUTSIDE_BEGIN_END_AND_FLUSH since that
doesn't exist anymore.
V3: - check for the extension being enabled
- tidier flagging of _NEW_MULTISAMPLE
- fix weird indentation in get.c
V4: - move flush later in SampleMaski()
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Sun, 25 Nov 2012 07:23:32 +0000 (20:23 +1300)]
mesa: implement GetMultisamplefv
Actual sample locations deferred to a driverfunc since only the driver
really knows where they will be.
V2: - pass the draw buffer to the driverfunc; don't fallback to pixel
center if driverfunc is missing.
- rename GetSampleLocation to GetSamplePosition
- invert y sample position for winsys FBOs, at Paul's suggestion
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Fri, 30 Nov 2012 08:20:40 +0000 (21:20 +1300)]
i965: expose new max sample counts
V2: For now, only expose a depth sample count of 1, since there are
possible unresolved interactions with HiZ.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Fri, 30 Nov 2012 08:19:08 +0000 (21:19 +1300)]
mesa: add new max sample count state
- GL_MAX_COLOR_TEXTURE_SAMPLES
- GL_MAX_DEPTH_TEXTURE_SAMPLES
- GL_MAX_INTEGER_SAMPLES
V2: initialize limits to 1 in _mesa_init_constants as suggested by Brian
and Paul
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Fri, 21 Dec 2012 08:33:37 +0000 (21:33 +1300)]
glsl: add support for ARB_texture_multisample
V2: - emit `sample` parameter properly for multisample texelFetch()
- fix spurious whitespace change
- introduce a new opcode ir_txf_ms rather than overloading the
existing ir_txf further. This makes doing the right thing in
the driver somewhat simpler.
V3: - fix weird whitespace
V4: - don't forget to include the new opcode in tex_opcode_strs[]
(thanks Kenneth for spotting this)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
[V2] Reviewed-by: Eric Anholt <eric@anholt.net>
[V2] Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Sun, 25 Nov 2012 01:42:55 +0000 (14:42 +1300)]
tests: add ARB_texture_multisample enums to table
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Sat, 24 Nov 2012 08:46:56 +0000 (21:46 +1300)]
mesa: add texobj support for ARB_texture_multisample
Adds the new texture targets, and per-image state for GL_TEXTURE_SAMPLES
and GL_TEXTURE_FIXED_SAMPLE_LOCATIONS.
V2: - Allow multisample texture targets in glInvalidateTexSubImage too.
This was already partly there, but I missed it the first time around
since the interaction is defined in a newer extension. Fixed weird
indentation.
- Allow multisample array textures in glFramebufferTextureLayer.
This was overlooked as the tests originally only used 2d
multisample textures.
V3: - Set min/mag filters sensibly for multisample textures. This
can't actually be changed by the user, so it's more sensible to
initialize it correctly than to hack around it being bogus later.
V4: - Tidy up initial min/mag filter setup. Setup in
_mesa_initialize_texture_object was bogus, but benign since
finish_texture_init() clobbered everything with correct values. For V4,
just do the setup in finish_texture_init().
V5: - Don't break glPopAttrib(GL_TEXTURE_BIT)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
[V2] Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Sat, 24 Nov 2012 00:08:45 +0000 (13:08 +1300)]
glapi: add ARB_texture_multisample
Adds new enums, dispatch machinery, and stubs for the 4 new entrypoints.
V2: - Drop placeholder
- Align enum values
- Remove explicit exec=mesa; it *is* the dispatch flavor we want,
but it's also the default. I misunderstood how this worked before;
after actually reading the generator it makes good sense.
V3: - Squash in stubs for new entrypoints, and dispatch_sanity tweaks,
so we don't get build breakage between those patches.
V4: - Fix various remaining whitespace issues
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
[1/3 V2] Reviewed-by: Matt Turner <mattst88@gmail.com>
[V3] Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Eric Anholt [Fri, 22 Feb 2013 19:46:19 +0000 (11:46 -0800)]
intel: Use the new "ctx" local variable I just added some more.
Reviewed-and-tested-by: Ian Romanick <ian.d.romanick@intel.com>
Eric Anholt [Fri, 15 Feb 2013 15:41:42 +0000 (07:41 -0800)]
i965: Make sRGB-capable framebuffers by default.
The GLX extension lets you expose visuals that explicitly guarantee you
that the GL_FRAMEBUFFER_SRGB_CAPABLE flag will be set, but we can set
the flag even while the visual doesn't provide the guarantee. This
appears to be consistent with other implementations, as we've seen
several apps now that don't require an srgb visual and assume sRGB will
work without checking the GL_FRAMEBUFFER_SRGB_CAPABLE flag.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55783
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60633
Reviewed-and-tested-by: Ian Romanick <ian.d.romanick@intel.com>
Eric Anholt [Wed, 31 Oct 2012 21:42:39 +0000 (14:42 -0700)]
intel: Fix software copying of miptree faces for weird formats.
Now that we have W-tiled S8, we can't just region_map and poke at bits --
there has to be some swizzling. Rely on intel_miptree_map to get that job
done. This should also get the highest performance path we know of for the
mapping (interesting if I get around to finishing movntdqa some day).
v2: Fix stale name of the bit in a comment.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Eric Anholt [Tue, 26 Feb 2013 18:50:05 +0000 (10:50 -0800)]
intel: Add a flag for miptree mapping to disable transcoding.
I want to reuse intel_miptree_map() to replace some region mapping that's
broken for separate stencil, but doing so would result in new demands on
ETC transcode that we actually don't want to happen.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Eric Anholt [Tue, 26 Feb 2013 19:35:40 +0000 (11:35 -0800)]
i965: Add WARN_ONCE for depthstencil workarounds we shouldn't be hitting.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Alex Deucher [Fri, 1 Mar 2013 17:11:31 +0000 (12:11 -0500)]
r600g: enable CP DMA on 6xx
Tested across several 6xx parts, no piglit regressions.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Thu, 21 Feb 2013 16:06:26 +0000 (17:06 +0100)]
r600g: don't require dword alignment with CP DMA for buffer transfers
which is a leftover from the days when we used streamout to copy buffers
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Marek Olšák [Wed, 27 Feb 2013 22:50:15 +0000 (23:50 +0100)]
r600g: always map uninitialized buffer range as unsynchronized
Any driver can implement this simple and efficient optimization.
Team Fortress 2 hits it always. The DISCARD_RANGE codepath is not even used
with TF2 anymore, so we avoid a ton of useless buffer copies.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
Marek Olšák [Wed, 27 Feb 2013 22:34:29 +0000 (23:34 +0100)]
gallium/util: add helper code for 1D integer range
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: cosmetic changes based on Brian's review
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch. (the next patch depends on it)
Marek Olšák [Wed, 27 Feb 2013 11:43:19 +0000 (12:43 +0100)]
r600g: cleanup deprecated register tables
These registers are either already emitted elsewhere or moved to start_cs.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Marek Olšák [Wed, 27 Feb 2013 10:00:14 +0000 (11:00 +0100)]
r600g: unify vgt states
The states were split because we thought it caused a hardlock. Now we know
the hardlock was caused by something else and has since been fixed.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Marek Olšák [Tue, 26 Feb 2013 21:31:03 +0000 (22:31 +0100)]
r600g: flush and invalidate htile cache when appropriate
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
Marek Olšák [Tue, 26 Feb 2013 16:20:25 +0000 (17:20 +0100)]
r600g: atomize streamout enabling
This doesn't fix any issue we know of, but there indeed is a week spot
in draw_vbo where streamout can fail. After streamout is enabled,
the need_cs_space call can flush the context, which causes the streamout
to be disabled right after it was enabled and bad things happen.
One way to fix it is to atomize the beginning part, so that no context flush
can happen between streamout enabling and the first drawing.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Marek Olšák [Thu, 21 Feb 2013 15:54:46 +0000 (16:54 +0100)]
r600g: use async DMA with a non-zero src offset
probably a typo
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
Marek Olšák [Wed, 27 Feb 2013 20:24:02 +0000 (21:24 +0100)]
r600g: pad the DMA CS to a multiple of 8 dwords
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
Jordan Justen [Wed, 20 Feb 2013 08:14:13 +0000 (00:14 -0800)]
intel: Enable __DRI_API_OPENGL_CORE api with dri2 contexts
Without this set, dri_util.c:dri2CreateContextAttribs
will reject requests to create a context with
__DRI_API_OPENGL_CORE.
This prevents a 3.2 core profile context from being created
even when MESA_GL_OVERRIDE_VERSION=3.2 is used.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jordan Justen [Fri, 22 Feb 2013 00:59:33 +0000 (16:59 -0800)]
intel: update max versions based on MESA_GL_VERSION_OVERRIDE
If the override is version is >= 3.1, then update the
max_gl_core_version. Otherwise, update max_gl_compat_version.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jordan Justen [Thu, 21 Feb 2013 18:01:40 +0000 (10:01 -0800)]
mesa version: add _mesa_get_gl_version_override
This will allow other code to get access to the override
version before a context is available.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jordan Justen [Tue, 19 Feb 2013 17:23:51 +0000 (09:23 -0800)]
glsl: allow GLSL compiler version to be overridden to 1.50
Although GLSL 1.50 compiler support is not available,
this change will allow MESA_GLSL_VERSION_OVERRIDE=150 to be
used while 1.50 support is being developed.
Since no drivers claim 1.50 GLSL support, this change should
only impact Mesa when MESA_GLSL_VERSION_OVERRIDE=150 is set.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>