OSDN Git Service
Eric Paris [Fri, 18 Dec 2009 02:24:28 +0000 (21:24 -0500)]
fanotify: infrastructure to add an remove marks on vfsmounts
infrastructure work to add and remove marks on vfsmounts. This should get
every set up except wiring the functions to the syscalls.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:28 +0000 (21:24 -0500)]
fanotify: should_send_event needs to handle vfsmounts
currently should_send_event in fanotify only cares about marks on inodes.
This patch extends that interface to indicate that it cares about events
that happened on vfsmounts.
Signed-off-by: Eric Paris <eparis@redhat.com>
Andreas Gruenbacher [Fri, 18 Dec 2009 02:24:27 +0000 (21:24 -0500)]
fsnotify: Infrastructure for per-mount watches
Per-mount watches allow groups to listen to fsnotify events on an entire
mount. This patch simply adds and initializes the fields needed in the
vfsmount struct to make this happen.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:27 +0000 (21:24 -0500)]
fsnotify: vfsmount marks generic functions
Much like inode-mark.c has all of the code dealing with marks on inodes
this patch adds a vfsmount-mark.c which has similar code but is intended
for marks on vfsmounts.
Signed-off-by: Eric Paris <eparis@redhat.com>
Andreas Gruenbacher [Fri, 18 Dec 2009 02:24:27 +0000 (21:24 -0500)]
fsnotify/vfsmount: add fsnotify fields to struct vfsmount
This patch adds the list and mask fields needed to support vfsmount marks.
These are the same fields fsnotify needs on an inode. They are not used,
just declared and we note where the cleanup hook should be (the function is
not yet defined)
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:27 +0000 (21:24 -0500)]
fsnotify: clear marks to 0 in fsnotify_init_mark
Currently fsnotify_init_mark sets some fields to 0/NULL. Some users
already used some sorts of zalloc, some didn't. This patch uses memset to
explicitly zero everything in the fsnotify_mark when it is initialized so we
don't have to be careful if fields are later added to marks.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:27 +0000 (21:24 -0500)]
fsnotify: split generic and inode specific mark code
currently all marking is done by functions in inode-mark.c. Some of this
is pretty generic and should be instead done in a generic function and we
should only put the inode specific code in inode-mark.c
Signed-off-by: Eric Paris <eparis@redhat.com>
Andreas Gruenbacher [Fri, 18 Dec 2009 02:24:27 +0000 (21:24 -0500)]
fanotify: Add pids to events
Pass the process identifiers of the triggering processes to fanotify
listeners: this information is useful for event filtering and logging.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Andreas Gruenbacher [Fri, 18 Dec 2009 02:24:26 +0000 (21:24 -0500)]
fanotify: create_fd cleanup
Code cleanup which does the fd creation work seperately from the userspace
metadata creation. It fits better with the other code.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Heiko Carstens [Fri, 18 Dec 2009 02:24:26 +0000 (21:24 -0500)]
fanotify: CONFIG_HAVE_SYSCALL_WRAPPERS for sys_fanotify_mark
Please note that you need the patch below in addition, otherwise the
syscall wrapper stuff won't work on those 32 bit architectures which enable
the wrappers.
When enabled the syscall wrapper defines always take long parameters and then
cast them to whatever is needed. This approach doesn't work for the 32 bit
case where the original syscall takes a long long parameter, since we would
lose the upper 32 bits.
So syscalls with 64 bit arguments are special cases wrt to syscall wrappers
and enp up in the ugliness below (see also sys_fallocate). In addition these
special cased syscall wrappers have the drawback that ftrace syscall tracing
doesn't work on them, since they don't get defined by using the usual macros.
Signed-off-by: Eric Paris <eparis@redhat.com>
Paul Mundt [Fri, 18 Dec 2009 02:24:26 +0000 (21:24 -0500)]
fanotify: select ANON_INODES.
fanotify references anon_inode_getfd(), which is only available with
ANON_INODES enabled. Presently this bails out with the following:
LD vmlinux
fs/built-in.o: In function `sys_fanotify_init':
(.text+0x26d1c): undefined reference to `anon_inode_getfd'
make: *** [vmlinux] Error 1
which is trivially corrected by adding an ANON_INODES select.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:26 +0000 (21:24 -0500)]
fanotify: send events using read
Send events to userspace by reading the file descriptor from fanotify_init().
One will get blocks of data which look like:
struct fanotify_event_metadata {
__u32 event_len;
__u32 vers;
__s32 fd;
__u64 mask;
__s64 pid;
__u64 cookie;
} __attribute__ ((packed));
Simple code to retrieve and deal with events is below
while ((len = read(fan_fd, buf, sizeof(buf))) > 0) {
struct fanotify_event_metadata *metadata;
metadata = (void *)buf;
while(FAN_EVENT_OK(metadata, len)) {
[PROCESS HERE!!]
if (metadata->fd >= 0 && close(metadata->fd) != 0)
goto fail;
metadata = FAN_EVENT_NEXT(metadata, len);
}
}
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:26 +0000 (21:24 -0500)]
fanotify: fanotify_mark syscall implementation
NAME
fanotify_mark - add, remove, or modify an fanotify mark on a
filesystem object
SYNOPSIS
int fanotify_mark(int fanotify_fd, unsigned int flags, u64 mask,
int dfd, const char *pathname)
DESCRIPTION
fanotify_mark() is used to add remove or modify a mark on a filesystem
object. Marks are used to indicate that the fanotify group is
interested in events which occur on that object. At this point in
time marks may only be added to files and directories.
fanotify_fd must be a file descriptor returned by fanotify_init()
The flags field must contain exactly one of the following:
FAN_MARK_ADD - or the bits in mask and ignored mask into the mark
FAN_MARK_REMOVE - bitwise remove the bits in mask and ignored mark
from the mark
The following values can be OR'd into the flags field:
FAN_MARK_DONT_FOLLOW - same meaning as O_NOFOLLOW as described in open(2)
FAN_MARK_ONLYDIR - same meaning as O_DIRECTORY as described in open(2)
dfd may be any of the following:
AT_FDCWD: the object will be lookup up based on pathname similar
to open(2)
file descriptor of a directory: if pathname is not NULL the
object to modify will be lookup up similar to openat(2)
file descriptor of the final object: if pathname is NULL the
object to modify will be the object referenced by dfd
The mask is the bitwise OR of the set of events of interest such as:
FAN_ACCESS - object was accessed (read)
FAN_MODIFY - object was modified (write)
FAN_CLOSE_WRITE - object was writable and was closed
FAN_CLOSE_NOWRITE - object was read only and was closed
FAN_OPEN - object was opened
FAN_EVENT_ON_CHILD - interested in objected that happen to
children. Only relavent when the object
is a directory
FAN_Q_OVERFLOW - event queue overflowed (not implemented)
RETURN VALUE
On success, this system call returns 0. On error, -1 is
returned, and errno is set to indicate the error.
ERRORS
EINVAL An invalid value was specified in flags.
EINVAL An invalid value was specified in mask.
EINVAL An invalid value was specified in ignored_mask.
EINVAL fanotify_fd is not a file descriptor as returned by
fanotify_init()
EBADF fanotify_fd is not a valid file descriptor
EBADF dfd is not a valid file descriptor and path is NULL.
ENOTDIR dfd is not a directory and path is not NULL
EACCESS no search permissions on some part of the path
ENENT file not found
ENOMEM Insufficient kernel memory is available.
CONFORMING TO
These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:26 +0000 (21:24 -0500)]
fanotify: sys_fanotify_mark declartion
This patch simply declares the new sys_fanotify_mark syscall
int fanotify_mark(int fanotify_fd, unsigned int flags, u64_mask,
int dfd const char *pathname)
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:26 +0000 (21:24 -0500)]
fanotify: fanotify_init syscall implementation
NAME
fanotify_init - initialize an fanotify group
SYNOPSIS
int fanotify_init(unsigned int flags, unsigned int event_f_flags, int priority);
DESCRIPTION
fanotify_init() initializes a new fanotify instance and returns a file
descriptor associated with the new fanotify event queue.
The following values can be OR'd into the flags field:
FAN_NONBLOCK Set the O_NONBLOCK file status flag on the new open file description.
Using this flag saves extra calls to fcntl(2) to achieve the same
result.
FAN_CLOEXEC Set the close-on-exec (FD_CLOEXEC) flag on the new file descriptor.
See the description of the O_CLOEXEC flag in open(2) for reasons why
this may be useful.
The event_f_flags argument is unused and must be set to 0
The priority argument is unused and must be set to 0
RETURN VALUE
On success, this system call return a new file descriptor. On error, -1 is
returned, and errno is set to indicate the error.
ERRORS
EINVAL An invalid value was specified in flags.
EINVAL A non-zero valid was passed in event_f_flags or in priority
ENFILE The system limit on the total number of file descriptors has been reached.
ENOMEM Insufficient kernel memory is available.
CONFORMING TO
These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:25 +0000 (21:24 -0500)]
fanotify: fanotify_init syscall declaration
This patch defines a new syscall fanotify_init() of the form:
int sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
unsigned int priority)
This syscall is used to create and fanotify group. This is very similar to
the inotify_init() syscall.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:25 +0000 (21:24 -0500)]
fanotify: do not clone on merge unless needed
Currently if 2 events are going to be merged on the notication queue with
different masks the second event will be cloned and will replace the first
event. However if this notification queue is the only place referencing
the event in question there is no reason not to just update the event in
place. We can tell this if the event->refcnt == 1. Since we hold a
reference for each queue this event is on we know that when refcnt == 1
this is the only queue. The other concern is that it might be about to be
added to a new queue, but this can't be the case since fsnotify holds a
reference on the event until it is finished adding it to queues.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:25 +0000 (21:24 -0500)]
fanotify: merge notification events with different masks
Instead of just merging fanotify events if they are exactly the same, merge
notification events with different masks. To do this we have to clone the
old event, update the mask in the new event with the new merged mask, and
put the new event in place of the old event.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:25 +0000 (21:24 -0500)]
fanotify:drop notification if they exist in the outgoing queue
fanotify listeners get an open file descriptor to the object in question so
the ordering of operations is not as important as in other notification
systems. inotify will drop events if the last event in the event FIFO is
the same as the current event. This patch will drop fanotify events if
they are the same as another event anywhere in the event FIFO.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:25 +0000 (21:24 -0500)]
fanotify: fscking all notification system
fanotify is a novel file notification system which bases notification on
giving userspace both an event type (open, close, read, write) and an open
file descriptor to the object in question. This should address a number of
races and problems with other notification systems like inotify and dnotify
and should allow the future implementation of blocking or access controlled
notification. These are useful for on access scanners or hierachical storage
management schemes.
This patch just implements the basics of the fsnotify functions.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Wu Fengguang [Mon, 8 Feb 2010 17:31:29 +0000 (12:31 -0500)]
fanotify: FMODE_NONOTIFY and __O_SYNC in sparc conflict
sparc used the same value as FMODE_NONOTIFY so change FMODE_NONOTIFY to be
something unique.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:25 +0000 (21:24 -0500)]
vfs: introduce FMODE_NONOTIFY
This is a new f_mode which can only be set by the kernel. It indicates
that the fd was opened by fanotify and should not cause future fanotify
events. This is needed to prevent fanotify livelock. An example of
obvious livelock is from fanotify close events.
Process A closes file1
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
notice a pattern?
The fix is to add the FMODE_NONOTIFY bit to the open filp done by the kernel
for fanotify. Thus when that file is used it will not generate future
events.
This patch simply defines the bit.
Signed-off-by: Eric Paris <eparis@redhat.com>
Andreas Gruenbacher [Fri, 18 Dec 2009 02:24:25 +0000 (21:24 -0500)]
fsnotify: take inode->i_lock inside fsnotify_find_mark_entry()
All callers to fsnotify_find_mark_entry() except one take and
release inode->i_lock around the call. Take the lock inside
fsnotify_find_mark_entry() instead.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:24 +0000 (21:24 -0500)]
dnotify: rename mark_entry to mark
nomenclature change. Used to call things 'entries' but now we just call
them 'marks.' Do those changes for dnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:24 +0000 (21:24 -0500)]
inotify: rename mark_entry to just mark
rename anything in inotify that deals with mark_entry to just be mark. It
makes a lot more sense.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:24 +0000 (21:24 -0500)]
fsnotify: rename mark_entry to just mark
previously I used mark_entry when talking about marks on inodes. The
_entry is pretty useless. Just use "mark" instead.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:24 +0000 (21:24 -0500)]
fsnotify: rename fsnotify_find_mark_entry to fsnotify_find_mark
the _entry portion of fsnotify functions is useless. Drop it.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:24 +0000 (21:24 -0500)]
fsnotify: rename fsnotify_mark_entry to just fsnotify_mark
The name is long and it serves no real purpose. So rename
fsnotify_mark_entry to just fsnotify_mark.
Signed-off-by: Eric Paris <eparis@redhat.com>
Andreas Gruenbacher [Fri, 18 Dec 2009 02:24:24 +0000 (21:24 -0500)]
fsnotify: kill FSNOTIFY_EVENT_FILE
Some fsnotify operations send a struct file. This is more information than
we technically need. We instead send a struct path in all cases instead of
sometimes a path and sometimes a file.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:24 +0000 (21:24 -0500)]
fsnotify: add flags to fsnotify_mark_entries
To differentiate between inode and vfsmount (or other future) types of
marks we add a flags field and set the inode bit on inode marks (the only
currently supported type of mark)
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:23 +0000 (21:24 -0500)]
fsnotify: add vfsmount specific fields to the fsnotify_mark_entry union
vfsmount marks need mostly the same data as inode specific fields, but for
consistency and understandability we put that data in a vfsmount specific
struct inside a union with inode specific data.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:23 +0000 (21:24 -0500)]
fsnotify: put inode specific fields in an fsnotify_mark in a union
The addition of marks on vfs mounts will be simplified if the inode
specific parts of a mark and the vfsmnt specific parts of a mark are
actually in a union so naming can be easy. This patch just implements the
inode struct and the union.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:23 +0000 (21:24 -0500)]
fsnotify: include vfsmount in should_send_event when appropriate
To ensure that a group will not duplicate events when it receives it based
on the vfsmount and the inode should_send_event test we should distinguish
those two cases. We pass a vfsmount to this function so groups can make
their own determinations.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:23 +0000 (21:24 -0500)]
fsnotify: mount point listeners list and global mask
currently all of the notification systems implemented select which inodes
they care about and receive messages only about those inodes (or the
children of those inodes.) This patch begins to flesh out fsnotify support
for the concept of listeners that want to hear notification for an inode
accessed below a given monut point. This patch implements a second list
of fsnotify groups to hold these types of groups and a second global mask
to hold the events of interest for this type of group.
The reason we want a second group list and mask is because the inode based
notification should_send_event support which makes each group look for a mark
on the given inode. With one nfsmount listener that means that every group would
have to take the inode->i_lock, look for their mark, not find one, and return
for every operation. By seperating vfsmount from inode listeners only when
there is a inode listener will the inode groups have to look for their
mark and take the inode lock. vfsmount listeners will have to grab the lock and
look for a mark but there should be fewer of them, and one vfsmount listener
won't cause the i_lock to be grabbed and released for every fsnotify group
on every io operation.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:23 +0000 (21:24 -0500)]
fsnotify: add groups to fsnotify_inode_groups when registering inode watch
Currently all fsnotify groups are added immediately to the
fsnotify_inode_groups list upon creation. This means, even groups with no
watches (common for audit) will be on the global tracking list and will
get checked for every event. This patch adds groups to the global list on
when the first inode mark is added to the group.
Signed-of-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:23 +0000 (21:24 -0500)]
fsnotify: initialize the group->num_marks in a better place
Currently the comments say that group->num_marks is held because the group
is on the fsnotify_group list. This isn't strictly the case, we really
just hold the num_marks for the life of the group (any time group->refcnt
is != 0) This patch moves the initialization stuff and makes it clear when
it is really being held.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:23 +0000 (21:24 -0500)]
fsnotify: rename fsnotify_groups to fsnotify_inode_groups
Simple renaming patch. fsnotify is about to support mount point listeners
so I am renaming fsnotify_groups and fsnotify_mask to indicate these are lists
used only for groups which have watches on inodes.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:22 +0000 (21:24 -0500)]
fsnotify: drop mask argument from fsnotify_alloc_group
Nothing uses the mask argument to fsnotify_alloc_group. This patch drops
that argument.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:22 +0000 (21:24 -0500)]
Audit: only set group mask when something is being watched
Currently the audit watch group always sets a mask equal to all events it
might care about. We instead should only set the group mask if we are
actually watching inodes. This should be a perf win when audit watches are
compiled in.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:22 +0000 (21:24 -0500)]
fsnotify: fsnotify_obtain_group should be fsnotify_alloc_group
fsnotify_obtain_group was intended to be able to find an already existing
group. Nothing uses that functionality. This just renames it to
fsnotify_alloc_group so it is clear what it is doing.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:22 +0000 (21:24 -0500)]
fsnotify: fsnotify_obtain_group kzalloc cleanup
fsnotify_obtain_group uses kzalloc but then proceedes to set things to 0.
This patch just deletes those useless lines.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:22 +0000 (21:24 -0500)]
fsnotify: remove group_num altogether
The original fsnotify interface has a group-num which was intended to be
able to find a group after it was added. I no longer think this is a
necessary thing to do and so we remove the group_num.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:22 +0000 (21:24 -0500)]
fsnotify: lock annotation for event replacement
fsnotify_replace_event need to lock both the old and the new event. This
causes lockdep to get all pissed off since it dosn't know this is safe.
It's safe in this case since the new event is impossible to be reached from
other places in the kernel.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:22 +0000 (21:24 -0500)]
fsnotify: replace an event on a list
fanotify would like to clone events already on its notification list, make
changes to the new event, and then replace the old event on the list with
the new event. This patch implements the replace functionality of that
process.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:21 +0000 (21:24 -0500)]
fsnotify: clone existing events
fsnotify_clone_event will take an event, clone it, and return the cloned
event to the caller. Since events may be in use by multiple fsnotify
groups simultaneously certain event entries (such as the mask) cannot be
changed after the event was created. Since fanotify would like to merge
events happening on the same file it needs a new clean event to work with
so it can change any fields it wishes.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:21 +0000 (21:24 -0500)]
fsnotify: per group notification queue merge types
inotify only wishes to merge a new event with the last event on the
notification fifo. fanotify is willing to merge any events including by
means of bitwise OR masks of multiple events together. This patch moves
the inotify event merging logic out of the generic fsnotify notification.c
and into the inotify code. This allows each use of fsnotify to provide
their own merge functionality.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:21 +0000 (21:24 -0500)]
fsnotify: send struct file when sending events to parents when possible
fanotify needs a path in order to open an fd to the object which changed.
Currently notifications to inode's parents are done using only the inode.
For some parental notification we have the entire file, send that so
fanotify can use it.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:21 +0000 (21:24 -0500)]
fsnotify: pass a file instead of an inode to open, read, and write
fanotify, the upcoming notification system actually needs a struct path so it can
do opens in the context of listeners, and it needs a file so it can get f_flags
from the original process. Close was the only operation that already was passing
a struct file to the notification hook. This patch passes a file for access,
modify, and open as well as they are easily available to these hooks.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:21 +0000 (21:24 -0500)]
fsnotify: include data in should_send calls
fanotify is going to need to look at file->private_data to know if an event
should be sent or not. This passes the data (which might be a file,
dentry, inode, or none) to the should_send function calls so fanotify can
get that information when available
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 02:24:21 +0000 (21:24 -0500)]
fsnotify: provide the data type to should_send_event
fanotify is only interested in event types which contain enough information
to open the original file in the context of the fanotify listener. Since
fanotify may not want to send events if that data isn't present we pass
the data type to the should_send_event function call so fanotify can express
its lack of interest.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Wed, 23 Dec 2009 04:16:33 +0000 (23:16 -0500)]
inotify: do not spam console without limit
inotify was supposed to have a dmesg printk ratelimitor which would cause
inotify to only emit one message per boot. The static bool was never set
so it kept firing messages. This patch correctly limits warnings in multiple
places.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:30:52 +0000 (20:30 -0500)]
inotify: remove inotify in kernel interface
nothing uses inotify in the kernel, drop it!
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:27:10 +0000 (20:27 -0500)]
inotify: do not reuse watch descriptors
Prior to 2.6.31 inotify would not reuse watch descriptors until all of
them had been used at least once. After the rewrite inotify would reuse
watch descriptors. The selinux utility 'restorecond' was found to have
problems when watch descriptors were reused. This patch reverts to the
pre inotify rewrite behavior to not reuse watch descriptors.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:07 +0000 (20:12 -0500)]
fsnotify: use kmem_cache_zalloc to simplify event initialization
fsnotify event initialization is done entry by entry with almost everything
set to either 0 or NULL. Use kmem_cache_zalloc and only initialize things
that need non-zero initialization. Also means we don't have to change
initialization entries based on the config options.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:06 +0000 (20:12 -0500)]
fsnotify: kzalloc fsnotify groups
Use kzalloc for fsnotify_groups so that none of the fields can leak any
information accidentally.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:06 +0000 (20:12 -0500)]
inotify: use container_of instead of casting
inotify_free_mark casts directly from an fsnotify_mark_entry to an
inotify_inode_mark_entry. This works, but should use container_of instead
for future proofing.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:06 +0000 (20:12 -0500)]
fsnotify: use fsnotify_create_event to allocate the q_overflow event
Currently fsnotify defines a static fsnotify event which is sent when a
group overflows its allotted queue length. This patch just allocates that
event from the event cache rather than defining it statically. There is no
known reason that the current implementation is wrong, but this makes sure the
event is initialized and created like any other.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:06 +0000 (20:12 -0500)]
Audit: audit watch init should not be before fsnotify init
Audit watch init and fsnotify init both use subsys_initcall() but since the
audit watch code is linked in before the fsnotify code the audit watch code
would be using the fsnotify srcu struct before it was initialized. This
patch fixes that problem by moving audit watch init to device_initcall() so
it happens after fsnotify is ready.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by : Sachin Sant <sachinp@in.ibm.com>
Eric Paris [Fri, 18 Dec 2009 01:12:06 +0000 (20:12 -0500)]
Audit: split audit watch Kconfig
Audit watch should depend on CONFIG_AUDIT_SYSCALL and should select
FSNOTIFY. This splits the spagetti like mixing of audit_watch and
audit_filter code so they can be configured seperately.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:06 +0000 (20:12 -0500)]
Audit: audit watches depend on fsnotify
CONFIG_AUDIT builds audit_watches which depend on fsnotify. Make
CONFIG_AUDIT select fsnotify.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:05 +0000 (20:12 -0500)]
audit: reimplement audit_trees using fsnotify rather than inotify
Simply switch audit_trees from using inotify to using fsnotify for it's
inode pinning and disappearing act information.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:05 +0000 (20:12 -0500)]
fsnotify: allow addition of duplicate fsnotify marks
This patch allows a task to add a second fsnotify mark to an inode for the
same group. This mark will be added to the end of the inode's list and
this will never be found by the stand fsnotify_find_mark() function. This
is useful if a user wants to add a new mark before removing the old one.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:05 +0000 (20:12 -0500)]
fsnotify: duplicate fsnotify_mark_entry data between 2 marks
Simple copy fsnotify information from one mark to another in preparation
for the second mark to replace the first.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:05 +0000 (20:12 -0500)]
audit: do not get and put just to free a watch
deleting audit watch rules is not currently done under audit_filter_mutex.
It was done this way because we could not hold the mutex during inotify
manipulation. Since we are using fsnotify we don't need to do the extra
get/put pair nor do we need the private list on which to store the parents
while they are about to be freed.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:04 +0000 (20:12 -0500)]
audit: redo audit watch locking and refcnt in light of fsnotify
fsnotify can handle mutexes to be held across all fsnotify operations since
it deals strickly in spinlocks. This can simplify and reduce some of the
audit_filter_mutex taking and dropping.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:04 +0000 (20:12 -0500)]
audit: convert audit watches to use fsnotify instead of inotify
Audit currently uses inotify to pin inodes in core and to detect when
watched inodes are deleted or unmounted. This patch uses fsnotify instead
of inotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:04 +0000 (20:12 -0500)]
Audit: clean up the audit_watch split
No real changes, just cleanup to the audit_watch split patch which we done
with minimal code changes for easy review. Now fix interfaces to make
things work better.
Signed-off-by: Eric Paris <eparis@redhat.com>
Eric Paris [Fri, 18 Dec 2009 01:12:04 +0000 (20:12 -0500)]
inotify: simplify the inotify idr handling
This patch moves all of the idr editing operations into their own idr
functions. It makes it easier to prove locking correctness and to to
understand the code flow.
Signed-off-by: Eric Paris <eparis@redhat.com>
Linus Torvalds [Tue, 27 Jul 2010 21:32:59 +0000 (14:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: Pass the correct end of buffer to p9stat_read
Jon Povey [Tue, 27 Jul 2010 20:18:06 +0000 (13:18 -0700)]
gpio: fix spurious printk when freeing a gpio
When freeing a gpio that has not been exported, gpio_unexport() prints a
debug message when it should just fall through silently.
Example spurious message:
gpio_unexport: gpio0 status -22
Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
Cc: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Vorontsov [Tue, 27 Jul 2010 20:18:05 +0000 (13:18 -0700)]
edac: mpc85xx: fix coldplug/hotplug module autoloading
The MPC85xx EDAC driver is missing module device aliases, so the driver
won't load automatically on boot. This patch fixes the issue by adding
proper MODULE_DEVICE_TABLE() macros.
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rudolf Marek [Tue, 27 Jul 2010 20:18:02 +0000 (13:18 -0700)]
drivers/rtc/rtc-rx8581.c: fix setdatetime
Fix the logic while writing new date/time to the chip. The driver
incorrectly wrote back register values to different registers and even
with wrong mask. The patch adds clearing of the VLF register, which
should be cleared if all date/time values are set.
Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Baron [Tue, 27 Jul 2010 20:18:01 +0000 (13:18 -0700)]
dynamic debug: move ddebug_remove_module() down into free_module()
The command
echo "file ec.c +p" >/sys/kernel/debug/dynamic_debug/control
causes an oops.
Move the call to ddebug_remove_module() down into free_module(). In this
way it should be called from all error paths. Currently, we are missing
the remove if the module init routine fails.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Reported-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Latchesar Ionkov [Mon, 19 Jul 2010 20:40:03 +0000 (15:40 -0500)]
9p: Pass the correct end of buffer to p9stat_read
Pass the correct end of the buffer to p9stat_read.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Linus Torvalds [Tue, 27 Jul 2010 16:23:39 +0000 (09:23 -0700)]
Merge branch 'urgent' of git://git./linux/kernel/git/paulus/perf
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perf:
perf, powerpc: Use perf_sample_data_init() for the FSL code
Linus Torvalds [Tue, 27 Jul 2010 16:22:55 +0000 (09:22 -0700)]
Merge git://git.infradead.org/users/cbou/battery-2.6.35
* git://git.infradead.org/users/cbou/battery-2.6.35:
ds2782_battery: Rename get_current to fix build failure / name conflict
Linus Torvalds [Tue, 27 Jul 2010 16:21:00 +0000 (09:21 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
s2io: fixing DBG_PRINT() macro
ath9k: fix dma direction for map/unmap in ath_rx_tasklet
net: dev_forward_skb should call nf_reset
net sched: fix race in mirred device removal
tun: avoid BUG, dump packet on GSO errors
bonding: set device in RLB ARP packet handler
wimax/i2400m: Add PID & VID for Intel WiMAX 6250
ipv6: Don't add routes to ipv6 disabled interfaces.
net: Fix skb_copy_expand() handling of ->csum_start
net: Fix corruption of skb csum field in pskb_expand_head() of net/core/skbuff.c
macvtap: Limit packet queue length
ixgbe/igb: catch invalid VF settings
bnx2x: Advance a module version
bnx2x: Protect statistics ramrod and sequence number
bnx2x: Protect a SM state change
wireless: use netif_rx_ni in ieee80211_send_layer2_update
Peter Zijlstra [Fri, 9 Jul 2010 08:21:21 +0000 (10:21 +0200)]
perf, powerpc: Use perf_sample_data_init() for the FSL code
We should use perf_sample_data_init() to initialize struct
perf_sample_data. As explained in the description of commit
dc1d628a
("perf: Provide generic perf_sample_data initialization"), it is
possible for userspace to get the kernel to dereference data.raw,
so if it is not initialized, that means that unprivileged userspace
can possibly oops the kernel. Using perf_sample_data_init makes sure
it gets initialized to NULL.
This conversion should have been included in commit
dc1d628a, but it
got missed.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linus Torvalds [Mon, 26 Jul 2010 23:02:07 +0000 (16:02 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Do not try to disable hpet if it hasn't been initialized before
x86, i8259: Only register sysdev if we have a real 8259 PIC
Breno Leitao [Mon, 26 Jul 2010 22:37:30 +0000 (15:37 -0700)]
s2io: fixing DBG_PRINT() macro
Patch
9e39f7c5b311a306977c5471f9e2ce4c456aa038 changed the
DBG_PRINT() macro and the if clause was wrongly changed. It means
that currently all the DBG_PRINT are being printed, flooding the
kernel log buffer with things like:
s2io: eth6: Next block at:
c0000000b9c90000
s2io: eth6: In Neterion Tx routine
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 26 Jul 2010 22:35:53 +0000 (15:35 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] powernow-k8: Limit Pstate transition latency check
[CPUFREQ] Fix PCC driver error path
[CPUFREQ] fix double freeing in error path of pcc-cpufreq
[CPUFREQ] pcc driver should check for pcch method before calling _OSC
[CPUFREQ] fix memory leak in cpufreq_add_dev
[CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
Linus Torvalds [Mon, 26 Jul 2010 22:35:04 +0000 (15:35 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
MIPS: Set io_map_base for several PCI bridges lacking it
MIPS: Alchemy: Define eth platform devices in the correct order
MIPS: BCM63xx: Prevent second enet registration on BCM6338
MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.
MIPS: N32: Define getdents64.
MIPS: MTX-1: Fix PCI on the MeshCube and related boards
MIPS: Make init_vdso a subsys_initcall.
MIPS: "Fix" useless 'init_vdso successfully' message.
MIPS: PowerTV: Move register setup to before reading registers.
SOUND: Au1000: Fix section mismatch
VIDEO: Au1100fb: Fix section mismatch
VIDEO: PMAGB-B: Fix section mismatch
VIDEO: PMAG-BA: Fix section mismatch
NET: declance: Fix section mismatches
VIDEO. gbefb: Fix section mismatches.
Jesse Barnes [Mon, 26 Jul 2010 20:51:22 +0000 (13:51 -0700)]
drm/i915: make sure we shut off the panel in eDP configs
Fix error from the last pull request. Making sure we shut the panel off
is more correct and saves power.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Mon, 26 Jul 2010 20:26:09 +0000 (13:26 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Linus Torvalds [Mon, 26 Jul 2010 20:07:25 +0000 (13:07 -0700)]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
sysfs: allow creating symlinks from untagged to tagged directories
sysfs: sysfs_delete_link handle symlinks from untagged to tagged directories.
sysfs: Don't allow the creation of symlinks we can't remove
Linus Torvalds [Mon, 26 Jul 2010 20:06:39 +0000 (13:06 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: musb: tusb6010: fix compile error with n8x0_defconfig
USB: FTDI: Add support for the RT System VX-7 radio programming cable
USB: add quirk for Broadcom BT dongle
USB: usb-storage: fix initializations of urb fields
USB: xhci: Set Mult field in endpoint context correctly.
USB: sisusbvga: Fix for USB 3.0
USB: adds Artisman USB dongle to list of quirky devices
USB: xhci: Set EP0 dequeue ptr after reset of configured device.
USB: Fix USB3.0 Port Speed Downgrade after port reset
USB: xHCI: Fix another bug in link TRB activation change.
USB: option: Add support for AMOI Skypephone S2
USB: New PIDs for Qualcomm gobi 2000 (qcserial)
USB: ftdi_sio: support for Signalyzer tools based on FTDI chips
USB: s3c2410_udc: be aware of connected gadget driver
USB: Expose vendor-specific ACM channel on Nokia 5230
USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c
USB: option: add support for 1da5:4518
Linus Torvalds [Mon, 26 Jul 2010 20:06:25 +0000 (13:06 -0700)]
Merge git://git./linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
serial: fix rs485 for atmel_serial on avr32
Linus Torvalds [Mon, 26 Jul 2010 20:04:25 +0000 (13:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: add pipe A force quirks to i915 driver
drm/i915: Fix panel fitting regression since
734b4157
drm/i915: fix deadlock in fb teardown
drm/i915: don't free non-existent compressed llb on ILK+
agp/intel: Use the correct mask to detect i830 aperture size.
drm/i915: disable FBC when more than one pipe is active
drm/i915: Use the correct scanout alignment for fbcon.
drm/i915: make sure eDP panel is turned on
drm/i915: add PANEL_UNLOCK_REGS definition
drm/i915: Make G4X-style PLL search more permissive
drm/i915: Clear any existing dither mode prior to enabling spatial dithering
drm/i915: handle shared framebuffers when flipping
drm/i915: Explosion following OOM in do_execbuffer.
gpu/drm/i915: Add a blacklist to omit modeset on LID open
Borislav Petkov [Thu, 8 Jul 2010 15:55:30 +0000 (17:55 +0200)]
[CPUFREQ] powernow-k8: Limit Pstate transition latency check
The Pstate transition latency check was added for broken F10h BIOSen
which wrongly contain a value of 0 for transition and bus master
latency. Fam11h and later, however, (will) have similar transition
latency so extend that behavior for them too.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Matthew Garrett [Thu, 15 Jul 2010 15:44:00 +0000 (11:44 -0400)]
[CPUFREQ] Fix PCC driver error path
The PCC cpufreq driver unmaps the mailbox address range if any CPUs fail to
initialise, but doesn't do anything to remove the registered CPUs from the
cpufreq core resulting in failures further down the line. We're better off
simply returning a failure - the cpufreq core will unregister us cleanly if
we end up with no successfully registered CPUs. Tidy up the failure path
and also add a sanity check to ensure that the firmware gives us a realistic
frequency - the core deals badly with that being set to 0.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Daniel J Blueman [Fri, 23 Jul 2010 22:06:52 +0000 (23:06 +0100)]
[CPUFREQ] fix double freeing in error path of pcc-cpufreq
Prevent double freeing on error path.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Matthew Garrett [Tue, 20 Jul 2010 17:52:00 +0000 (13:52 -0400)]
[CPUFREQ] pcc driver should check for pcch method before calling _OSC
The pcc specification documents an _OSC method that's incompatible with the
one defined as part of the ACPI spec. This shouldn't be a problem as both
are supposed to be guarded with a UUID. Unfortunately approximately nobody
(including HP, who wrote this spec) properly check the UUID on entry to the
_OSC call. Right now this could result in surprising behaviour if the pcc
driver performs an _OSC call on a machine that doesn't implement the pcc
specification. Check whether the PCCH method exists first in order to reduce
this probability.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Xiaotian Feng [Tue, 20 Jul 2010 12:11:02 +0000 (20:11 +0800)]
[CPUFREQ] fix memory leak in cpufreq_add_dev
We didn't free policy->related_cpus in error path err_unlock_policy.
This is catched by following kmemleak report:
unreferenced object 0xffff88022a0b96d0 (size 512):
comm "modprobe", pid 886, jiffies
4294689177 (age 780.694s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffff8111ebe5>] create_object+0x186/0x281
[<
ffffffff814fad4f>] kmemleak_alloc+0x60/0xa7
[<
ffffffff8111127a>] kmem_cache_alloc_node_notrace+0x120/0x142
[<
ffffffff81262e4f>] alloc_cpumask_var_node+0x2c/0xd7
[<
ffffffff81262f0b>] alloc_cpumask_var+0x11/0x13
[<
ffffffff81262f1c>] zalloc_cpumask_var+0xf/0x11
[<
ffffffff8140fac0>] cpufreq_add_dev+0x11f/0x547
[<
ffffffff81334bda>] sysdev_driver_register+0xc2/0x11d
[<
ffffffff8140e334>] cpufreq_register_driver+0xcb/0x1b8
[<
ffffffffa032e040>] 0xffffffffa032e040
[<
ffffffff810021ba>] do_one_initcall+0x5e/0x15c
[<
ffffffff81087f94>] sys_init_module+0xa6/0x1e6
[<
ffffffff81009bc2>] system_call_fastpath+0x16/0x1b
[<
ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Andrej Gelenberg [Fri, 14 May 2010 22:15:58 +0000 (15:15 -0700)]
[CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
395913d0b1db37092ea3d9d69b832183b1dd84c5 ("[CPUFREQ] remove rwsem lock
from CPUFREQ_GOV_STOP call (second call site)") is not needed, because
there is no rwsem lock in cpufreq_ondemand and cpufreq_conservative
anymore. Lock should not be released until the work done.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=1594
Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Eric W. Biederman [Wed, 21 Jul 2010 05:12:01 +0000 (22:12 -0700)]
sysfs: allow creating symlinks from untagged to tagged directories
Supporting symlinks from untagged to tagged directories is reasonable,
and needed to support CONFIG_SYSFS_DEPRECATED. So don't fail a prior
allowing that case to work.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric W. Biederman [Wed, 21 Jul 2010 05:10:58 +0000 (22:10 -0700)]
sysfs: sysfs_delete_link handle symlinks from untagged to tagged directories.
This happens for network devices when SYSFS_DEPRECATED is enabled.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric W. Biederman [Thu, 8 Jul 2010 16:31:24 +0000 (09:31 -0700)]
sysfs: Don't allow the creation of symlinks we can't remove
Recently my tagged sysfs support revealed a flaw in the device core
that a few rare drivers are running into such that we don't always put
network devices in a class subdirectory named net/.
Since we are not creating the class directory the network devices wind
up in a non-tagged directory, but the symlinks to the network devices
from /sys/class/net are in a tagged directory. All of which works
until we go to remove or rename the symlink. When we remove or rename
a symlink we look in the namespace of the target of the symlink.
Since the target of the symlink is in a non-tagged sysfs directory we
don't have a namespace to look in, and we fail to remove the symlink.
Detect this problem up front and simply don't create symlinks we won't
be able to remove later. This prevents symlink leakage and fails in
a much clearer and more understandable way.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Balbi [Mon, 5 Jul 2010 09:12:01 +0000 (12:12 +0300)]
USB: musb: tusb6010: fix compile error with n8x0_defconfig
Drop the unnecessary empty stubs in tusb6010.c and avoid
a compile error when building kernel for n8x0.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Corey Minyard [Wed, 21 Jul 2010 13:39:22 +0000 (08:39 -0500)]
USB: FTDI: Add support for the RT System VX-7 radio programming cable
RT Systems has put out bunch of ham radio cables based on the FT232RL
chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7
radios.
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Wed, 14 Jul 2010 16:26:22 +0000 (18:26 +0200)]
USB: add quirk for Broadcom BT dongle
This device needs to be reset when resuming
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>