OSDN Git Service
Marcelo Leitner [Wed, 3 Dec 2014 19:30:19 +0000 (17:30 -0200)]
netfilter: conntrack: adjust nf_conntrack_buckets default value
Manually bumping either nf_conntrack_buckets or nf_conntrack_max has
become a common task as our Linux servers tend to serve more and more
clients/applications, so let's adjust nf_conntrack_buckets this to a
more updated value.
Now for systems with more than 4GB of memory, nf_conntrack_buckets
becomes 65536 instead of 16384, resulting in nf_conntrack_max=256k
entries.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Sat, 13 Dec 2014 00:11:12 +0000 (16:11 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull another networking update from David Miller:
"Small follow-up to the main merge pull from the other day:
1) Alexander Duyck's DMA memory barrier patch set.
2) cxgb4 driver fixes from Karen Xie.
3) Add missing export of fixed_phy_register() to modules, from Mark
Salter.
4) DSA bug fixes from Florian Fainelli"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
net/macb: add TX multiqueue support for gem
linux/interrupt.h: remove the definition of unused tasklet_hi_enable
jme: replace calls to redundant function
net: ethernet: davicom: Allow to select DM9000 for nios2
net: ethernet: smsc: Allow to select SMC91X for nios2
cxgb4: Add support for QSA modules
libcxgbi: fix freeing skb prematurely
cxgb4i: use set_wr_txq() to set tx queues
cxgb4i: handle non-pdu-aligned rx data
cxgb4i: additional types of negative advice
cxgb4/cxgb4i: set the max. pdu length in firmware
cxgb4i: fix credit check for tx_data_wr
cxgb4i: fix tx immediate data credit check
net: phy: export fixed_phy_register()
fib_trie: Fix trie balancing issue if new node pushes down existing node
vlan: Add ability to always enable TSO/UFO
r8169:update rtl8168g pcie ephy parameter
net: dsa: bcm_sf2: force link for all fixed PHY devices
fm10k/igb/ixgbe: Use dma_rmb on Rx descriptor reads
r8169: Use dma_rmb() and dma_wmb() for DescOwn checks
...
Linus Torvalds [Fri, 12 Dec 2014 23:40:30 +0000 (15:40 -0800)]
Merge git://git./linux/kernel/git/davem/ide
Pull IDE update from David Miller:
"Two small IDE layer adjustments"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
drivers: ide: Fix mostly harmless off-by-one hardcoded value
IDE: Deletion of an unnecessary check before the function call "module_put"
Linus Torvalds [Fri, 12 Dec 2014 23:36:40 +0000 (15:36 -0800)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc update from David Miller:
"Not a lot of stuff this time around, mostly bug fixing:
- Fix alignment of 32-bit crosscall datastructure on Leon, from
Andreas Larsson.
- Several fixes to the virtual disk driver on sparc64 by Dwight
Engen, including handling resets of the service domain properly"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sunvdc: reconnect ldc after vds service domain restarts
sparc/ldc: create separate ldc_unbind from ldc_free
vio: create routines for inc,dec vio dring indexes
sunvdc: fix module unload/reload
sparc32, leon: Align ccall_info to prevent unaligned traps on crosscall
Jaedon Shin [Fri, 12 Dec 2014 18:51:15 +0000 (19:51 +0100)]
MIPS: Use phys_addr_t instead of phys_t
Ralf Baechle says:
"This should have been part of the merge commit
c0222ac08666 (Merge
branch 'upstream' of git://git.linux-mips.org/pub/scm/-
ralf/upstream-linus) but I forgot to mention the need for this in my
pull request"
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 12 Dec 2014 23:26:48 +0000 (15:26 -0800)]
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"The major updates included in this update are:
- Clang compatible stack pointer accesses by Behan Webster.
- SA11x0 updates from Dmitry Eremin-Solenikov.
- kgdb handling of breakpoints with read-only text/modules
- Support for Privileged-no-execute feature on ARMv7 to prevent
userspace code execution by the kernel.
- AMBA primecell bus handling of irq-safe runtime PM
- Unwinding support for memset/memzero/memmove/memcpy functions
- VFP fixes for Krait CPUs and improvements in detecting the VFP
architecture
- A number of code cleanups (using pr_*, removing or reducing the
severity of a couple of kernel messages, splitting ftrace asm code
out to a separate file, etc.)
- Add machine name to stack dump output"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (62 commits)
ARM: 8247/2: pcmcia: sa1100: make use of device clock
ARM: 8246/2: pcmcia: sa1111: provide device clock
ARM: 8245/1: pcmcia: soc-common: enable/disable socket clocks
ARM: 8244/1: fbdev: sa1100fb: make use of device clock
ARM: 8243/1: sa1100: add a clock alias for sa1111 pcmcia device
ARM: 8242/1: sa1100: add cpu clock
ARM: 8221/1: PJ4: allow building in Thumb-2 mode
ARM: 8234/1: sa1100: reorder IRQ handling code
ARM: 8233/1: sa1100: switch to hwirq usage
ARM: 8232/1: sa1100: merge GPIO multiplexer IRQ to "normal" irq domain
ARM: 8231/1: sa1100: introduce irqdomains support
ARM: 8230/1: sa1100: shift IRQs by one
ARM: 8229/1: sa1100: replace irq numbers with names in irq driver
ARM: 8228/1: sa1100: drop entry-macro.S
ARM: 8227/1: sa1100: switch to MULTI_IRQ_HANDLER
ARM: 8241/1: Update processor_modes for hyp and monitor mode
ARM: 8240/1: MCPM: document mcpm_sync_init()
ARM: 8239/1: Introduce {set,clear}_pte_bit
ARM: 8238/1: mm: Refine set_memory_* functions
ARM: 8237/1: fix flush_pfn_alias
...
Linus Torvalds [Fri, 12 Dec 2014 23:10:34 +0000 (15:10 -0800)]
Merge tag 'iommu-updates-v3.19' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This time with:
- A new IOMMU-API call: iommu_map_sg() to map multiple non-contiguous
pages into an IO address space with only one API call. This allows
certain optimizations in the IOMMU driver.
- DMAR device hotplug in the Intel VT-d driver. It is now possible
to hotplug the IOMMU itself.
- A new IOMMU driver for the Rockchip ARM platform.
- Couple of cleanups and improvements in the OMAP IOMMU driver.
- Nesting support for the ARM-SMMU driver.
- Various other small cleanups and improvements.
Please note that this time some branches were also pulled into other
trees, like the DRI and the Tegra tree. The VT-d branch was also
pulled into tip/x86/apic.
Some patches for the AMD IOMMUv2 driver are not in the IOMMU tree but
were merged by Andrew (or finally ended up in the DRI tree)"
* tag 'iommu-updates-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
iommu: Decouple iommu_map_sg from CPU page size
iommu/vt-d: Fix an off-by-one bug in __domain_mapping()
pci, ACPI, iommu: Enhance pci_root to support DMAR device hotplug
iommu/vt-d: Enhance intel-iommu driver to support DMAR unit hotplug
iommu/vt-d: Enhance error recovery in function intel_enable_irq_remapping()
iommu/vt-d: Enhance intel_irq_remapping driver to support DMAR unit hotplug
iommu/vt-d: Search for ACPI _DSM method for DMAR hotplug
iommu/vt-d: Implement DMAR unit hotplug framework
iommu/vt-d: Dynamically allocate and free seq_id for DMAR units
iommu/vt-d: Introduce helper function dmar_walk_resources()
iommu/arm-smmu: add support for DOMAIN_ATTR_NESTING attribute
iommu/arm-smmu: Play nice on non-ARM/SMMU systems
iommu/amd: remove compiler warning due to IOMMU_CAP_NOEXEC
iommu/arm-smmu: add IOMMU_CAP_NOEXEC to the ARM SMMU driver
iommu: add capability IOMMU_CAP_NOEXEC
iommu/arm-smmu: change IOMMU_EXEC to IOMMU_NOEXEC
iommu/amd: Fix accounting of device_state
x86/vt-d: Fix incorrect bit operations in setting values
iommu/rockchip: Allow to compile with COMPILE_TEST
iommu/ipmmu-vmsa: Return proper error if devm_request_irq fails
...
Linus Torvalds [Fri, 12 Dec 2014 22:59:53 +0000 (14:59 -0800)]
Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Main features this time are:
- BAM v1.3.0 support form qcom bam dma
- support for Allwinner sun8i dma
- atmels eXtended DMA Controller driver
- chancnt cleanup by Maxime
- fixes spread over drivers"
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits)
dmaenegine: Delete a check before free_percpu()
dmaengine: ioatdma: fix dma mapping errors
dma: cppi41: add a delay while setting the TD bit
dma: cppi41: wait longer for the HW to return the descriptor
dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model
dmaengine: fsl-edma: fix calculation of remaining bytes
drivers/dma/pch_dma: declare pch_dma_id_table as static
dmaengine: ste_dma40: fix error return code
dma: imx-sdma: clarify about firmware not found error
Documentation: devicetree: Fix Xilinx VDMA specification
dmaengine: pl330: update author info
dmaengine: clarify the issue_pending expectations
dmaengine: at_xdmac: Add DMA_PRIVATE
ARM: dts: at_xdmac: fix bad value of dma-cells in documentation
dmaengine: at_xdmac: fix missing spin_unlock
dmaengine: at_xdmac: fix a bug in transfer residue computation
dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status()
dmaengine: at_xdmac: remove chancnt affectation
dmaengine: at_xdmac: prefer usage of readl/writel_relaxed
dmaengine: xdmac: fix print warning on dma_addr_t variable
...
Linus Torvalds [Fri, 12 Dec 2014 22:49:56 +0000 (14:49 -0800)]
Merge tag 'for-linus' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI driver updates from Corey Minyard:
- Quite a few bug fixes
- A new driver for the powernv
- A new driver for the SMBus interface from the IPMI 2.0 specification
* tag 'for-linus' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: Check the BT interrupt enable periodically
ipmi: Fix attention handling for system interfaces
ipmi: Periodically check to see if irqs and messages are set right
drivers/char/ipmi: Add powernv IPMI driver
ipmi: Add SMBus interface driver (SSIF)
ipmi: Remove the now unused priority from SMI sender
ipmi: Remove the now unnecessary message queue
ipmi: Make the message handler easier to use for SMI interfaces
ipmi: Move message sending into its own function
ipmi: rename waiting_msgs to waiting_rcv_msgs
ipmi: Fix handling of BMC flags
ipmi: Initialize BMC device attributes
ipmi: Unregister previously registered driver in error case
ipmi: Use the proper type for acpi_handle
ipmi: Fix a bug in hot add/remove
ipmi: Remove useless sysfs_name parameters
ipmi: clean up the device handling for the bmc device
ipmi: Move the address source to string to ipmi-generic code
ipmi: Ignore SSIF in the PNP handling
Linus Torvalds [Fri, 12 Dec 2014 22:42:48 +0000 (14:42 -0800)]
Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation update from Jonathan Corbet:
"Here's my set of accumulated documentation changes for 3.19.
It includes a couple of additions to the coding style document, some
fixes for minor build problems within the documentation tree, the
relocation of the kselftest docs, and various tweaks and additions.
A couple of changes reach outside of Documentation/; they only make
trivial comment changes and I did my best to get the required acks.
Complete with a shiny signed tag this time around"
* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
kobject: grammar fix
Input: xpad - update docs to reflect current state
Documentation: Build mic/mpssd only for x86_64
cgroups: Documentation: fix wrong cgroupfs paths
Documentation/email-clients.txt: add info about Claws Mail
CodingStyle: add some more error handling guidelines
kselftest: Move the docs to the Documentation dir
Documentation: fix formatting to make 's' happy
Documentation: power: Fix typo in Documentation/power
Documentation: vm: Add 1GB large page support information
ipv4: add kernel parameter tcpmhash_entries
Documentation: Fix a typo in mailbox.txt
treewide: Fix typo in Documentation/DocBook/device-drivers
CodingStyle: Add a chapter on conditional compilation
Rasmus Villemoes [Thu, 27 Nov 2014 21:57:29 +0000 (22:57 +0100)]
drivers: ide: Fix mostly harmless off-by-one hardcoded value
The string "IOMEGA Clik!" has length 12, not 11. Using strstarts
avoids the error-prone hardcoding of the prefix length. For
consistency, also change the occurence just above.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Fri, 21 Nov 2014 19:22:32 +0000 (20:22 +0100)]
IDE: Deletion of an unnecessary check before the function call "module_put"
The module_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Dec 2014 20:17:32 +0000 (15:17 -0500)]
Merge branch 'gem'
Cyrille Pitchen says:
====================
net/macb: add TX multiqueue support for gem
ChangeLog
v3:
- reduce the number of added #define in macb.h
- simplify the queue initialization
- add some more comments
- use "hw_q" index when dealing with the hardware queue mask and "q" index for
linux (software) queue index in "for" loops
v2:
fix compilation warnings for netdev_vdbg("%u...", queue - bp->queues, ...) calls
v1:
At the first look this patch may look quite big but it cannot be splitted.
Each queue has its own dedicated IRQ, which should be handled.
Also the Transmit Base Queue Pointer register of each available queue must be
initialized before starting the transmission, otherwise the transmission will be
halted immediately as HRESP errors are likely to occur.
In addition, some fields had to be moved from struct macb into struct macb_queue
so a common code could manage the queues.
This patch was applied to net-next and tested on a sama5d36ek board, which embeds
both macb and gem IPs, to check the backward compatibility.
Also it was tested on a sama5dx FPGA platform with a gem designed to use 3 queues.
Then we used the tc program to set a queue discipline policy as describe in the
Documentation/networking/multiqueue.txt: we successfully used each queue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cyrille Pitchen [Fri, 12 Dec 2014 12:26:44 +0000 (13:26 +0100)]
net/macb: add TX multiqueue support for gem
gem devices designed with multiqueue CANNOT work without this patch.
When probing a gem device, the driver must first prepare and enable the
peripheral clock before accessing I/O registers. The second step is to read the
MID register to find whether the device is a gem or an old macb IP.
For gem devices, it reads the Design Configuration Register 6 (DCFG6) to
compute to total number of queues, whereas macb devices always have a single
queue.
Only then it can call alloc_etherdev_mq() with the correct number of queues.
This is the reason why the order of some initializations has been changed in
macb_probe().
Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized
for each queue.
For backward compatibility reasons, queue0 uses the legacy registers ISR, IER,
IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers
ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7].
Except this hardware detail there is no real difference between queue0 and the
others. The driver hides that thanks to the struct macb_queue.
This structure allows us to share a common set of functions for all the queues.
Besides when a TX error occurs, the gem MUST be halted before writing any of
the TBQP registers to reset the relevant queue. An immediate side effect is
that the other queues too aren't processed anymore by the gem.
So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux
network engine that all transmissions are stopped.
Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the
interrupt handlers of the other queues from running as each of them may wake
its associated queue up (please refer to macb_tx_interrupt()).
Finally, as all queues have previously been stopped, they should be restarted
calling netif_tx_start_all_queues() and setting the TSTART bit into the Network
Control Register. Before this patch, when dealing with a single queue, the
driver used to defer the reset of the faulting queue and the write of the
TSTART bit until the next call of macb_start_xmit().
As explained before, this bit is now set by macb_tx_error_task() too. That's
why the faulting queue MUST be reset by setting the TX_USED bit in its first
buffer descriptor before writing the TSTART bit.
Queue 0 always exits and is the lowest priority when other queues are available.
The higher the index of the queue is, the higher its priority is.
When transmitting frames, the TX queue is selected by the skb->queue_mapping
value. So queue discipline can be used to define the queue priority policy.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Dec 2014 20:15:50 +0000 (15:15 -0500)]
Merge branch 'kill_tasklet_hi_enable'
Quentin Lambert says:
====================
Remove redundant function
tasklet_hi_enable and tasklet_enable are redundant. Since
tasklet_hi_enable is used only 6 times in 1 file, the first
patch changes calls to the function with calls to tasklet_enable.
The second patch removes tasklet_hi_enable definition.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Quentin Lambert [Fri, 12 Dec 2014 12:36:54 +0000 (13:36 +0100)]
linux/interrupt.h: remove the definition of unused tasklet_hi_enable
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quentin Lambert [Fri, 12 Dec 2014 12:35:52 +0000 (13:35 +0100)]
jme: replace calls to redundant function
Calls to tasklet_hi_enable are replaced by calls to
tasklet_enable since the 2 functions are redundant.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 12 Dec 2014 19:34:13 +0000 (11:34 -0800)]
Merge tag 'please-pull-morepstore' of git://git./linux/kernel/git/aegl/linux
Pull pstore update #2 from Tony Luck:
"Couple of pstore-ram enhancements to allow use of different memory
attributes"
* tag 'please-pull-morepstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore-ram: Allow optional mapping with pgprot_noncached
pstore-ram: Fix hangs by using write-combine mappings
Linus Torvalds [Fri, 12 Dec 2014 19:15:23 +0000 (11:15 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs update from Chris Mason:
"From a feature point of view, most of the code here comes from Miao
Xie and others at Fujitsu to implement scrubbing and replacing devices
on raid56. This has been in development for a while, and it's a big
improvement.
Filipe and Josef have a great assortment of fixes, many of which solve
problems corruptions either after a crash or in error conditions. I
still have a round two from Filipe for next week that solves
corruptions with discard and block group removal"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits)
Btrfs: make get_caching_control unconditionally return the ctl
Btrfs: fix unprotected deletion from pending_chunks list
Btrfs: fix fs mapping extent map leak
Btrfs: fix memory leak after block remove + trimming
Btrfs: make btrfs_abort_transaction consider existence of new block groups
Btrfs: fix race between writing free space cache and trimming
Btrfs: fix race between fs trimming and block group remove/allocation
Btrfs, replace: enable dev-replace for raid56
Btrfs: fix freeing used extents after removing empty block group
Btrfs: fix crash caused by block group removal
Btrfs: fix invalid block group rbtree access after bg is removed
Btrfs, raid56: fix use-after-free problem in the final device replace procedure on raid56
Btrfs, replace: write raid56 parity into the replace target device
Btrfs, replace: write dirty pages into the replace target device
Btrfs, raid56: support parity scrub on raid56
Btrfs, raid56: use a variant to record the operation type
Btrfs, scrub: repair the common data on RAID5/6 if it is corrupted
Btrfs, raid56: don't change bbio and raid_map
Btrfs: remove unnecessary code of stripe_index assignment in __btrfs_map_block
Btrfs: remove noused bbio_ret in __btrfs_map_block in condition
...
Linus Torvalds [Fri, 12 Dec 2014 18:26:47 +0000 (10:26 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- i2c-hid race condition fix from Jean-Baptiste Maneyrol
- Logitech driver now supports vendor-specific HID++ protocol, allowing
us to deliver a full multitouch support on wider range of Logitech
touchpads. Written by Benjamin Tissoires
- MS Surface Pro 3 Type Cover support added by Alan Wu
- RMI touchpad support improvements from Andrew Duggan
- a lot of updates to Wacom driver from Jason Gerecke and Ping Cheng
- various small fixes all over the place
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (56 commits)
HID: rmi: The address of query8 must be calculated based on which query registers are present
HID: rmi: Check for additional ACM registers appended to F11 data report
HID: i2c-hid: prevent buffer overflow in early IRQ
HID: logitech-hidpp: disable io in probe error path
HID: logitech-hidpp: add boundary check for name retrieval
HID: logitech-hidpp: check name retrieval return code
HID: logitech-hidpp: do not return the name length
HID: wacom: Report input events for each finger on generic devices
HID: wacom: Initialize MT slots for generic devices at post_parse_hid
HID: wacom: Update maximum X/Y accounding to outbound offset
HID: wacom: Add support for DTU-1031X
HID: wacom: add defines for new Cintiq and DTU outbound tracking
HID: wacom: fix freeze on open when autosuspend is on
HID: wacom: re-add accidentally dropped Lenovo PID
HID: make hid_report_len as a static inline function in hid.h
HID: wacom: Consult the application usage when determining field type
HID: wacom: PAD is independent with pen/touch
HID: multitouch: Add quirk for VTL touch panels
HID: i2c-hid: fix race condition reading reports
HID: wacom: Add angular resolution data to some ABS axes
...
Linus Torvalds [Fri, 12 Dec 2014 18:08:06 +0000 (10:08 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial
Pull trivial tree update from Jiri Kosina:
"Usual stuff: documentation updates, printk() fixes, etc"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
intel_ips: fix a type in error message
cpufreq: cpufreq-dt: Move newline to end of error message
ps3rom: fix error return code
treewide: fix typo in printk and Kconfig
ARM: dts: bcm63138: change "interupts" to "interrupts"
Replace mentions of "list_struct" to "list_head"
kernel: trace: fix printk message
scsi: mpt2sas: fix ioctl in comment
zbud, zswap: change module author email
clocksource: Fix 'clcoksource' typo in comment
arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
gpio: msm-v1: make boolean argument more obvious
usb: Fix typo in usb-serial-simple.c
PCI: Fix comment typo 'COMFIG_PM_OPS'
powerpc: Fix comment typo 'CONIFG_8xx'
powerpc: Fix comment typos 'CONFiG_ALTIVEC'
clk: st: Spelling s/stucture/structure/
isci: Spelling s/stucture/structure/
usb: gadget: zero: Spelling s/infrastucture/infrastructure/
treewide: Fix company name in module descriptions
...
Linus Torvalds [Fri, 12 Dec 2014 17:57:22 +0000 (09:57 -0800)]
Merge tag 'upstream-3.19-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Artem Bityutskiy:
"This includes the following UBI/UBIFS changes:
- UBI debug messages now include the UBI device number. This change
is responsible for the big diffstat since it touched every
debugging print statement.
- An Xattr bug-fix which fixes SELinux support
- Several error path fixes in UBI/UBIFS"
* tag 'upstream-3.19-rc1' of git://git.infradead.org/linux-ubifs:
UBI: Fix invalid vfree()
UBI: Fix double free after do_sync_erase()
UBIFS: fix a couple bugs in UBIFS xattr length calculation
UBI: vtbl: Use ubi_eba_atomic_leb_change()
UBI: Extend UBI layer debug/messaging capabilities
UBIFS: fix budget leak in error path
Linus Torvalds [Fri, 12 Dec 2014 17:48:17 +0000 (09:48 -0800)]
Merge tag 'xfs-for-linus-3.19-rc1' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs update from Dave Chinner:
"There's relatively little change in this update; it is mainly bug
fixes, cleanups and more of the on-going libxfs restructuring and
on-disk format header consolidation work.
Details:
- more on-disk format header consolidation
- move some structures shared with userspace to libxfs
- new per-mount workqueue to fix for deadlocks between nested loop
mounted filesystems
- various bug fixes for ENOSPC, stats, quota off and preallocation
- a bunch of compiler warning fixes for set-but-unused variables
- various code cleanups"
* tag 'xfs-for-linus-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (24 commits)
xfs: split metadata and log buffer completion to separate workqueues
xfs: fix set-but-unused warnings
xfs: move type conversion functions to xfs_dir.h
xfs: move ftype conversion functions to libxfs
xfs: lobotomise xfs_trans_read_buf_map()
xfs: active inodes stat is broken
xfs: cleanup xfs_bmse_merge returns
xfs: cleanup xfs_bmse_shift_one goto mess
xfs: fix premature enospc on inode allocation
xfs: overflow in xfs_iomap_eof_align_last_fsb
xfs: fix simple_return.cocci warning in xfs_bmse_shift_one
xfs: fix simple_return.cocci warning in xfs_file_readdir
libxfs: fix simple_return.cocci warnings
xfs: remove unnecessary null checks
xfs: merge xfs_inum.h into xfs_format.h
xfs: move most of xfs_sb.h to xfs_format.h
xfs: merge xfs_ag.h into xfs_format.h
xfs: move acl structures to xfs_format.h
xfs: merge xfs_dinode.h into xfs_format.h
xfs: catch invalid negative blknos in _xfs_buf_find()
...
Linus Torvalds [Fri, 12 Dec 2014 17:28:03 +0000 (09:28 -0800)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Lots of bugs fixes, including Zheng and Jan's extent status shrinker
fixes, which should improve CPU utilization and potential soft lockups
under heavy memory pressure, and Eric Whitney's bigalloc fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: ext4_da_convert_inline_data_to_extent drop locked page after error
ext4: fix suboptimal seek_{data,hole} extents traversial
ext4: ext4_inline_data_fiemap should respect callers argument
ext4: prevent fsreentrance deadlock for inline_data
ext4: forbid journal_async_commit in data=ordered mode
jbd2: remove unnecessary NULL check before iput()
ext4: Remove an unnecessary check for NULL before iput()
ext4: remove unneeded code in ext4_unlink
ext4: don't count external journal blocks as overhead
ext4: remove never taken branch from ext4_ext_shift_path_extents()
ext4: create nojournal_checksum mount option
ext4: update comments regarding ext4_delete_inode()
ext4: cleanup GFP flags inside resize path
ext4: introduce aging to extent status tree
ext4: cleanup flag definitions for extent status tree
ext4: limit number of scanned extents in status tree shrinker
ext4: move handling of list of shrinkable inodes into extent status code
ext4: change LRU to round-robin in extent status tree shrinker
ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
ext4: fix block reservation for bigalloc filesystems
...
Tobias Klauser [Fri, 12 Dec 2014 09:21:11 +0000 (10:21 +0100)]
net: ethernet: davicom: Allow to select DM9000 for nios2
This chip is present on older revisions of the DE2 development kit.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 12 Dec 2014 09:21:08 +0000 (10:21 +0100)]
net: ethernet: smsc: Allow to select SMC91X for nios2
This chip is present on the Nios2 Development Kit 2C35.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Fri, 12 Dec 2014 06:37:57 +0000 (12:07 +0530)]
cxgb4: Add support for QSA modules
Firmware 1.12.25.0 added support for QSA module, adding the driver code for it.
Also fixes some ethtool get settings for other module types.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Dec 2014 16:22:34 +0000 (11:22 -0500)]
Merge branch 'cxgb4'
Karen Xie says:
====================
cxgb4/cxgbi: misc. fixes for cxgb4i
This patch set fixes cxgb4i's tx credit calculation and adds handling of
additional rx message and negative advice types. It also removes the duplicate
code in cxgb4i to set the outgoing queues of a packet.
Karen Xie (7):
cxgb4i: fix tx immediate data credit check
cxgb4i: fix credit check for tx_data_wr
cxgb4/cxgb4i: set max. outgoing pdu length in the f/w
cxgb4i: add more types of negative advice
cxgb4i: handle non pdu-aligned rx data
cxgb4i: use cxgb4's set_wr_txq() for setting outgoing queues
libcxgbi: fix the debug print accessing skb after it is freed
Sending to net as the fixes are mostly in the network area and it touches
cxgb4's header file (t4fw_api.h).
v2 corrects the "CHECK"s flagged by checkpatch.pl --strict.
v3 splits the 3rd patch from v2 to two separate patches. Adds detailed commit
messages and makes subject more concise. Patch 3/6 also changes the return
value of is_neg_adv() from int to bool.
v4 -- please ignore.
v5 splits the 1st patch from v3 to two separate patches and reduces code
duplication in make_tx_data_wr().
v6 removed the code style cleanup in the 2nd patch. The style update will be
addressed in a separate patch.
v7 updates the 7th patch with more detailed commit message.
v8 removes the duplicate subject lines from the message bodies.
v9 reformatted the commit messages to be max. 80 characters per line.
v10 rebased to net-next tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Karen Xie [Fri, 12 Dec 2014 03:13:47 +0000 (19:13 -0800)]
libcxgbi: fix freeing skb prematurely
With debug turned on the debug print would access the skb after it is freed.
Fix it to free the skb after the debug print.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karen Xie [Fri, 12 Dec 2014 03:13:44 +0000 (19:13 -0800)]
cxgb4i: use set_wr_txq() to set tx queues
use cxgb4's set_wr_txq() for setting of the tx queue for a outgoing packet.
remove the similar function in cxgb4i.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karen Xie [Fri, 12 Dec 2014 03:13:41 +0000 (19:13 -0800)]
cxgb4i: handle non-pdu-aligned rx data
Abort the connection upon receiving of cpl_rx_data, which means the pdu cannot
be recovered from the tcp stream. This generally is due to pdu header
corruption.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karen Xie [Fri, 12 Dec 2014 03:13:38 +0000 (19:13 -0800)]
cxgb4i: additional types of negative advice
Treat both CPL_ERR_KEEPALV_NEG_ADVICE and CPL_ERR_PERSIST_NEG_ADVICE as
negative advice.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karen Xie [Fri, 12 Dec 2014 03:13:35 +0000 (19:13 -0800)]
cxgb4/cxgb4i: set the max. pdu length in firmware
Programs the firmware of the maximum outgoing iscsi pdu length per connection.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karen Xie [Fri, 12 Dec 2014 03:13:32 +0000 (19:13 -0800)]
cxgb4i: fix credit check for tx_data_wr
make sure any tx credit related checking is done before adding the wr header.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karen Xie [Fri, 12 Dec 2014 03:13:29 +0000 (19:13 -0800)]
cxgb4i: fix tx immediate data credit check
Only data skbs need the wr header added while control skbs do not. Make sure
they are treated differently.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Salter [Fri, 12 Dec 2014 04:03:26 +0000 (23:03 -0500)]
net: phy: export fixed_phy_register()
When building the bcmgenet driver as module, I get:
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/genet/genet.ko] undefined!
commit
b0ba512e225d72 ("net: bcmgenet: enable driver to work without device
tree") which added a call to fixed_phy_register. But fixed_phy_register
needs to be exported if used from a module.
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 11 Dec 2014 05:49:22 +0000 (21:49 -0800)]
fib_trie: Fix trie balancing issue if new node pushes down existing node
This patch addresses an issue with the level compression of the fib_trie.
Specifically in the case of adding a new leaf that triggers a new node to
be added that takes the place of the old node. The result is a trie where
the 1 child tnode is on one side and one leaf is on the other which gives
you a very deep trie. Below is the script I used to generate a trie on
dummy0 with a 10.X.X.X family of addresses.
ip link add type dummy
ipval=
184549374
bit=2
for i in `seq 1 23`
do
ifconfig dummy0:$bit $ipval/8
ipval=`expr $ipval - $bit`
bit=`expr $bit \* 2`
done
cat /proc/net/fib_triestat
Running the script before the patch:
Local:
Aver depth: 10.82
Max depth: 23
Leaves: 29
Prefixes: 30
Internal nodes: 27
1: 26 2: 1
Pointers: 56
Null ptrs: 1
Total size: 5 kB
After applying the patch and repeating:
Local:
Aver depth: 4.72
Max depth: 9
Leaves: 29
Prefixes: 30
Internal nodes: 12
1: 3 2: 2 3: 7
Pointers: 70
Null ptrs: 30
Total size: 4 kB
What this fix does is start the rebalance at the newly created tnode
instead of at the parent tnode. This way if there is a gap between the
parent and the new node it doesn't prevent the new tnode from being
coalesced with any pre-existing nodes that may have been pushed into one
of the new nodes child branches.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Wed, 10 Dec 2014 02:43:13 +0000 (11:43 +0900)]
vlan: Add ability to always enable TSO/UFO
Since the real device can segment packets by software, a vlan device
can set TSO/UFO even when the real device doesn't have those features.
Unlike GSO, this allows packets to be segmented after Qdisc.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Kosina [Fri, 12 Dec 2014 10:15:33 +0000 (11:15 +0100)]
Merge branches 'for-3.19/hid-report-len', 'for-3.19/i2c-hid', 'for-3.19/lenovo', 'for-3.19/logitech', 'for-3.19/microsoft', 'for-3.19/plantronics', 'for-3.19/rmi', 'for-3.19/sony' and 'for-3.19/wacom' into for-linus
Andrew Duggan [Mon, 8 Dec 2014 23:02:00 +0000 (15:02 -0800)]
HID: rmi: The address of query8 must be calculated based on which query registers are present
If a touchpad does not report relative data then query 6 will not be present and the address
of query 8 will be one less. This patches calculates the location of query 8 instead of
hardcoding the offset.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Andrew Duggan [Mon, 8 Dec 2014 23:01:59 +0000 (15:01 -0800)]
HID: rmi: Check for additional ACM registers appended to F11 data report
If a touchpad reports the F11 data40 register then this indicates that the touchpad reports
additional ACM (Accidental Contact Mitigation) data after the F11 data in the HID attention
report. These additional bytes shift the position of the F30 button data causing the driver
to incorrectly report button state when this functionality is present. This patch accounts
for the additional data in the report.
Fixes:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/
1398533
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina [Fri, 12 Dec 2014 10:09:23 +0000 (11:09 +0100)]
Merge branches 'for-3.18/upstream-fixes' and 'for-3.19/upstream' into for-linus
Conflicts:
drivers/hid/hid-input.c
Gwendal Grignou [Fri, 12 Dec 2014 00:02:45 +0000 (16:02 -0800)]
HID: i2c-hid: prevent buffer overflow in early IRQ
Before ->start() is called, bufsize size is set to HID_MIN_BUFFER_SIZE,
64 bytes. While processing the IRQ, we were asking to receive up to
wMaxInputLength bytes, which can be bigger than 64 bytes.
Later, when ->start is run, a proper bufsize will be calculated.
Given wMaxInputLength is said to be unreliable in other part of the
code, set to receive only what we can even if it results in truncated
reports.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Fri, 12 Dec 2014 02:57:19 +0000 (18:57 -0800)]
Merge branch 'for-3.19' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup update from Tejun Heo:
"cpuset got simplified a bit. cgroup core got a fix on unified
hierarchy and grew some effective css related interfaces which will be
used for blkio support for writeback IO traffic which is currently
being worked on"
* 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: implement cgroup_get_e_css()
cgroup: add cgroup_subsys->css_e_css_changed()
cgroup: add cgroup_subsys->css_released()
cgroup: fix the async css offline wait logic in cgroup_subtree_control_write()
cgroup: restructure child_subsys_mask handling in cgroup_subtree_control_write()
cgroup: separate out cgroup_calc_child_subsys_mask() from cgroup_refresh_child_subsys_mask()
cpuset: lock vs unlock typo
cpuset: simplify cpuset_node_allowed API
cpuset: convert callback_mutex to a spinlock
Dwight Engen [Thu, 11 Dec 2014 17:26:17 +0000 (12:26 -0500)]
sunvdc: reconnect ldc after vds service domain restarts
This change enables the sunvdc driver to reconnect and recover if a vds
service domain is disconnected or bounced.
By default, it will wait indefinitely for the service domain to become
available again, but will honor a non-zero vdc-timout md property if one
is set. If a timeout is reached, any in-progress I/O's are completed
with -EIO.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Reviewed-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dwight Engen [Thu, 11 Dec 2014 17:26:16 +0000 (12:26 -0500)]
sparc/ldc: create separate ldc_unbind from ldc_free
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dwight Engen [Thu, 11 Dec 2014 17:26:15 +0000 (12:26 -0500)]
vio: create routines for inc,dec vio dring indexes
Both sunvdc and sunvnet implemented distinct functionality for incrementing
and decrementing dring indexes. Create common functions for use by both
from the sunvnet versions, which were chosen since they will still work
correctly in case a non power of two ring size is used.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 12 Dec 2014 02:52:37 +0000 (18:52 -0800)]
Merge branch 'for-3.19' of git://git./linux/kernel/git/tj/libata
Pull libata changes from Tejun Heo:
"The only interesting piece is the support for shingled drives. The
changes in libata layer are minimal. All it does is identifying the
new class of device and report upwards accordingly"
* 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: Remove FIXME comment in atapi_request_sense()
sata_rcar: Document deprecated "renesas,rcar-sata"
sata_rcar: Add clocks to sata_rcar bindings
ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module option
libata-scsi: Update SATL for ZAC drives
libata: Implement ATA_DEV_ZAC
libsas: use ata_dev_classify()
Dwight Engen [Thu, 11 Dec 2014 17:25:42 +0000 (12:25 -0500)]
sunvdc: fix module unload/reload
Free resources allocated during port/disk probing so that the module may be
successfully reloaded after unloading.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Fri, 5 Dec 2014 09:55:28 +0000 (10:55 +0100)]
sparc32, leon: Align ccall_info to prevent unaligned traps on crosscall
It is being filled in using std in leon_cross_call.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 12 Dec 2014 02:48:45 +0000 (18:48 -0800)]
Merge branch 'for-3.19' of git://git./linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
"Work items which may be involved in memory reclaim path may be
executed by the rescuer under memory pressure. When a rescuer gets
activated, it processes whatever are on the pending list and then goes
back to sleep until the manager kicks it again which involves 100ms
delay.
This is problematic for self-requeueing work items or the ones running
on ordered workqueues as there always is only one work item on the
pending list when the rescuer kicks in. The execution of that work
item produces more to execute but the rescuer won't see them until
after the said 100ms has passed, so such workqueues would only execute
one work item every 100ms under prolonged memory pressure, which BTW
may be being prolonged due to the slow execution.
Neil wrote up a patch which fixes this issue by keeping the rescuer
working as long as the target workqueue is busy but doesn't have
enough workers"
* 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: allow rescuer thread to do more work.
workqueue: invert the order between pool->lock and wq_mayday_lock
workqueue: cosmetic update in rescuer_thread()
Chun-Hao Lin [Wed, 10 Dec 2014 13:28:38 +0000 (21:28 +0800)]
r8169:update rtl8168g pcie ephy parameter
Add ephy parameter to rtl8168g.
Also change the common function of rtl8168g from "rtl_hw_start_8168g_1" to
"rtl_hw_start_8168g". And function "rtl_hw_start_8168g_1" is used for
setting rtl8168g hardware parameters.
Following is the explanation of what hardware parameter change for.
rtl8168g may erroneous judge the PCIe signal quality and show the error bit
on PCI configuration space when in PCIe low power mode.
The following ephy parameters are for above issue.
{ 0x00, 0x0000, 0x0008 }
{ 0x0c, 0x37d0, 0x0820 }
{ 0x1e, 0x0000, 0x0001 }
rtl8168g may return to PCIe L0 from PCIe L0s low power mode too slow.
The following ephy parameter is for above issue.
{ 0x19, 0x8000, 0x0000 }
Signed-off-by: Chunhao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 12 Dec 2014 02:36:26 +0000 (18:36 -0800)]
Merge branch 'for-3.19' of git://git./linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
"Nothing interesting. A patch to convert the remaining __get_cpu_var()
users, another to fix non-critical off-by-one in an assertion and a
cosmetic conversion to lockless_dereference() in percpu-ref.
The back-merge from mainline is to receive lockless_dereference()"
* 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: Replace smp_read_barrier_depends() with lockless_dereference()
percpu: Convert remaining __get_cpu_var uses in 3.18-rcX
percpu: off by one in BUG_ON()
Florian Fainelli [Fri, 12 Dec 2014 02:12:42 +0000 (18:12 -0800)]
net: dsa: bcm_sf2: force link for all fixed PHY devices
For ports of the switch that we define as "fixed PHYs" such as MoCA, we
would have our Port 7 special handling that would allow us to assert the
link status indication.
For other ports, such as e.g: RGMII_1 connected to a cable modem, we
would rely on whatever the bootloader has left configured, which is a
bad assumption to make, we really need to force the link status
indication here.
Fixes:
246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Dec 2014 02:15:37 +0000 (21:15 -0500)]
Merge branch 'dma_mb'
Alexander Duyck says:
====================
arch: Add lightweight memory barriers for coherent memory access
These patches introduce two new primitives for synchronizing cache coherent
memory writes and reads. These two new primitives are:
dma_rmb()
dma_wmb()
The first patch cleans up some unnecessary overhead related to the
definition of read_barrier_depends, smp_read_barrier_depends, and comments
related to the barrier.
The second patch adds the primitives for the applicable architectures and
asm-generic.
The third patch adds the barriers to r8169 which turns out to be a good
example of where the new barriers might be useful as they have full
rmb()/wmb() barriers ordering accesses to the descriptors and the DescOwn
bit.
The fourth patch adds support for coherent_rmb() to the Intel fm10k, igb,
and ixgbe drivers. Testing with the ixgbe driver has shown a processing
time reduction of at least 7ns per 64B frame on a Core i7-4930K.
This patch series is essentially the v7 for:
v4-7: Add lightweight memory barriers for coherent memory access
v3: Add lightweight memory barriers fast_rmb() and fast_wmb()
v2: Introduce load_acquire() and store_release()
v1: Introduce read_acquire()
The key changes in this patch series versus the earlier patches are:
v7 resubmit:
- Added Acked-by: Ben Herrenschmidt from v5 to dma_rmb/wmb patch
- No code changes from previous set, still applies cleanly and builds.
v7:
- Dropped test/debug patch that was accidentally slipped in
v6:
- Replaced "memory based device I/O" with "consistent memory" in
docs
- Added reference to DMA-API.txt to explain consistent memory
v5:
- Renamed barriers dma_rmb and dma_wmb
- Undid smp_wmb changes in x86 and PowerPC
- Defined smp_rmb as __lwsync for SMP case on PowerPC
v4:
- Renamed barriers coherent_rmb and coherent_wmb
- Added smp_lwsync for use in smp_load_acquire/smp_store_release
v3:
- Moved away from acquire()/store() and instead focused on barriers
- Added cleanup of read_barrier_depends
- Added change in r8169 to fix cur_tx/DescOwn ordering
- Simplified changes to just replacing/moving barriers in r8169
- Added update to documentation with code example
v2:
- Renamed read_acquire() to be consistent with smp_load_acquire()
- Changed barrier used to be consistent with smp_load_acquire()
- Updated PowerPC code to use __lwsync based on IBM article
- Added store_release() as this is a viable use case for drivers
- Added r8169 patch which is able to fully use primitives
- Added fm10k/igb/ixgbe patch which is able to test performance
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 12 Dec 2014 02:15:33 +0000 (18:15 -0800)]
Merge tag 'stable/for-linus-3.19-rc0-tag' of git://git./linux/kernel/git/xen/tip
Pull xen features and fixes from David Vrabel:
- Fully support non-coherent devices on ARM by introducing the
mechanisms to request the hypervisor to perform the required cache
maintainance operations.
- A number of pciback bug fixes and cleanups. Notably a deadlock fix
if a PCI device was manually uunbound and a fix for incorrectly
restoring state after a function reset.
- In x86 PVHVM guests, use the APIC for interrupts if this has been
virtualized by the hardware. This reduces the number of interrupt-
related VM exits on such hardware.
* tag 'stable/for-linus-3.19-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (26 commits)
Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
xen/pci: Use APIC directly when APIC virtualization hardware is available
xen/pci: Defer initialization of MSI ops on HVM guests
xen-pciback: drop SR-IOV VFs when PF driver unloads
xen/pciback: Restore configuration space when detaching from a guest.
PCI: Expose pci_load_saved_state for public consumption.
xen/pciback: Remove tons of dereferences
xen/pciback: Print out the domain owning the device.
xen/pciback: Include the domain id if removing the device whilst still in use
driver core: Provide an wrapper around the mutex to do lockdep warnings
xen/pciback: Don't deadlock when unbinding.
swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single
swiotlb-xen: call xen_dma_sync_single_for_device when appropriate
swiotlb-xen: remove BUG_ON in xen_bus_to_phys
swiotlb-xen: pass dev_addr to xen_dma_unmap_page and xen_dma_sync_single_for_cpu
xen/arm: introduce GNTTABOP_cache_flush
xen/arm/arm64: introduce xen_arch_need_swiotlb
xen/arm/arm64: merge xen/mm32.c into xen/mm.c
xen/arm: use hypercall to flush caches in map_page
xen: add a dma_addr_t dev_addr argument to xen_dma_map_page
...
Alexander Duyck [Thu, 11 Dec 2014 23:02:28 +0000 (15:02 -0800)]
fm10k/igb/ixgbe: Use dma_rmb on Rx descriptor reads
This change makes it so that dma_rmb is used when reading the Rx
descriptor. The advantage of dma_rmb is that it allows for a much
lower cost barrier on x86, powerpc, arm, and arm64 architectures than a
traditional memory barrier when dealing with reads that only have to
synchronize to coherent memory.
In addition I have updated the code so that it just checks to see if any
bits have been set instead of just the DD bit since the DD bit will always
be set as a part of a descriptor write-back so we just need to check for a
non-zero value being present at that memory location rather than just
checking for any specific bit. This allows the code itself to appear much
cleaner and allows the compiler more room to optimize.
Cc: Matthew Vick <matthew.vick@intel.com>
Cc: Don Skidmore <donald.c.skidmore@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 11 Dec 2014 23:02:17 +0000 (15:02 -0800)]
r8169: Use dma_rmb() and dma_wmb() for DescOwn checks
The r8169 use a pair of wmb() calls when setting up the descriptor rings.
The first is to synchronize the descriptor data with the descriptor status,
and the second is to synchronize the descriptor status with the use of the
MMIO doorbell to notify the device that descriptors are ready. This can
come at a heavy price on some systems, and is not really necessary on
systems such as x86 as a simple barrier() would suffice to order store/store
accesses. As such we can replace the first memory barrier with
dma_wmb() to reduce the cost for these accesses.
In addition the r8169 uses a rmb() to prevent compiler optimization in the
cleanup paths, however by moving the barrier down a few lines and replacing
it with a dma_rmb() we should be able to use it to guarantee
descriptor accesses do not occur until the device has updated the DescOwn
bit from its end.
One last change I made is to move the update of cur_tx in the xmit path to
after the wmb. This way we can guarantee the device and all CPUs should
see the DescOwn update before they see the cur_tx value update.
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 11 Dec 2014 23:02:06 +0000 (15:02 -0800)]
arch: Add lightweight memory barriers dma_rmb() and dma_wmb()
There are a number of situations where the mandatory barriers rmb() and
wmb() are used to order memory/memory operations in the device drivers
and those barriers are much heavier than they actually need to be. For
example in the case of PowerPC wmb() calls the heavy-weight sync
instruction when for coherent memory operations all that is really needed
is an lsync or eieio instruction.
This commit adds a coherent only version of the mandatory memory barriers
rmb() and wmb(). In most cases this should result in the barrier being the
same as the SMP barriers for the SMP case, however in some cases we use a
barrier that is somewhere in between rmb() and smp_rmb(). For example on
ARM the rmb barriers break down as follows:
Barrier Call Explanation
--------- -------- ----------------------------------
rmb() dsb() Data synchronization barrier - system
dma_rmb() dmb(osh) data memory barrier - outer sharable
smp_rmb() dmb(ish) data memory barrier - inner sharable
These new barriers are not as safe as the standard rmb() and wmb().
Specifically they do not guarantee ordering between coherent and incoherent
memories. The primary use case for these would be to enforce ordering of
reads and writes when accessing coherent memory that is shared between the
CPU and a device.
It may also be noted that there is no dma_mb(). Most architectures don't
provide a good mechanism for performing a coherent only full barrier without
resorting to the same mechanism used in mb(). As such there isn't much to
be gained in trying to define such a function.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Miller <davem@davemloft.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 11 Dec 2014 23:01:55 +0000 (15:01 -0800)]
arch: Cleanup read_barrier_depends() and comments
This patch is meant to cleanup the handling of read_barrier_depends and
smp_read_barrier_depends. In multiple spots in the kernel headers
read_barrier_depends is defined as "do {} while (0)", however we then go
into the SMP vs non-SMP sections and have the SMP version reference
read_barrier_depends, and the non-SMP define it as yet another empty
do/while.
With this commit I went through and cleaned out the duplicate definitions
and reduced the number of definitions down to 2 per header. In addition I
moved the 50 line comments for the macro from the x86 and mips headers that
defined it as an empty do/while to those that were actually defining the
macro, alpha and blackfin.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Dec 2014 02:00:13 +0000 (21:00 -0500)]
Merge branch 'dsa'
Florian Fainelli says:
====================
net: dsa: two small bug fixes
Here are two small fixes for the DSA slave interface creation code:
- first patch fixes a null pointer de-reference with an invalid PHY
device pointer while calling phy_connect_direct()
- second path propagates the dsa_slave_phy_setup() error code down to
its caller: dsa_slave_create
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 11 Dec 2014 20:49:16 +0000 (12:49 -0800)]
net: dsa: propagate error code from dsa_slave_phy_setup
In case we cannot attach to our slave netdevice PHY, error out and
propagate that error up to the caller: dsa_slave_create().
Fixes:
0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups")
Signed-off-by: Andrey Volkov <andrey.volkov@nexvision.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 11 Dec 2014 20:49:15 +0000 (12:49 -0800)]
net: dsa: handle non-existing PHYs on switch internal bus
In case there is no PHY at the designated address on the internal
switch, we would basically de-reference a null pointer here:
dsa_slave_phy_setup(...)
{
p->phy = ds->slave_mii_bus->phy_map[p->port];
phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link,
^------
This can be triggered when the platform configuration (platform_data or
Device Tree) indicates there should be a PHY device at this address, but
the HW is non-responsive, such that we cannot attach a PHY device at
this specific location.
Fix this by checking the return value prior to calling
phy_connect_direct().
CC: Andrew Lunn <andrew@lunn.ch>
Fixes:
b31f65fb4383 ("net: dsa: slave: Fix autoneg for phys on switch MDIO bus")
Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Andrey Volkov <andrey.volkov@nexvision.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 12 Dec 2014 01:56:37 +0000 (17:56 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is an unusually large pull request for MIPS - in parts because
lots of patches missed the 3.18 deadline but primarily because some
folks opened the flood gates.
- Retire the MIPS-specific phys_t with the generic phys_addr_t.
- Improvments for the backtrace code used by oprofile.
- Better backtraces on SMP systems.
- Cleanups for the Octeon platform code.
- Cleanups and fixes for the Loongson platform code.
- Cleanups and fixes to the firmware library.
- Switch ATH79 platform to use the firmware library.
- Grand overhault to the SEAD3 and Malta interrupt code.
- Move the GIC interrupt code to drivers/irqchip
- Lots of GIC cleanups and updates to the GIC code to use modern IRQ
infrastructures and features of the kernel.
- OF documentation updates for the GIC bindings
- Move GIC clocksource driver to drivers/clocksource
- Merge GIC clocksource driver with clockevent driver.
- Further updates to bring the GIC clocksource driver up to date.
- R3000 TLB code cleanups
- Improvments to the Loongson 3 platform code.
- Convert pr_warning to pr_warn.
- Merge a bunch of small lantiq and ralink fixes that have been
staged/lingering inside the openwrt tree for a while.
- Update archhelp for IP22/IP32
- Fix a number of issues for Loongson 1B.
- New clocksource and clockevent driver for Loongson 1B.
- Further work on clk handling for Loongson 1B.
- Platform work for Broadcom BMIPS.
- Error handling cleanups for TurboChannel.
- Fixes and optimization to the microMIPS support.
- Option to disable the FTLB.
- Dump more relevant information on machine check exception
- Change binfmt to allow arch to examine PT_*PROC headers
- Support for new style FPU register model in O32
- VDSO randomization.
- BCM47xx cleanups
- BCM47xx reimplement the way the kernel accesses NVRAM information.
- Random cleanups
- Add support for ATH25 platforms
- Remove pointless locking code in some PCI platforms.
- Some improvments to EVA support
- Minor Alchemy cleanup"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
MIPS: Add MFHC0 and MTHC0 instructions to uasm.
MIPS: Cosmetic cleanups of page table headers.
MIPS: Add CP0 macros for extended EntryLo registers
MIPS: Remove now unused definition of phys_t.
MIPS: Replace use of phys_t with phys_addr_t.
MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
MIPS: <asm/types.h> fix indentation.
MAINTAINERS: Add entry for BMIPS multiplatform kernel
MIPS: Enable VDSO randomization
MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
MIPS: Remove declaration of obsolete arch_init_clk_ops()
MIPS: atomic.h: Reformat to fit in 79 columns
MIPS: Apply `.insn' to fixup labels throughout
MIPS: Fix microMIPS LL/SC immediate offsets
MIPS: Kconfig: Only allow 32-bit microMIPS builds
MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
MIPS: mm: Only build one microassembler that is suitable
...
Linus Torvalds [Fri, 12 Dec 2014 01:48:14 +0000 (17:48 -0800)]
Merge tag 'powerpc-3.19-1' of git://git./linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
"Some nice cleanups like removing bootmem, and removal of
__get_cpu_var().
There is one patch to mm/gup.c. This is the generic GUP
implementation, but is only used by us and arm(64). We have an ack
from Steve Capper, and although we didn't get an ack from Andrew he
told us to take the patch through the powerpc tree.
There's one cxl patch. This is in drivers/misc, but Greg said he was
happy for us to manage fixes for it.
There is an infrastructure patch to support an IPMI driver for OPAL.
There is also an RTC driver for OPAL. We weren't able to get any
response from the RTC maintainer, Alessandro Zummo, so in the end we
just merged the driver.
The usual batch of Freescale updates from Scott"
* tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits)
powerpc/powernv: Return to cpu offline loop when finished in KVM guest
powerpc/book3s: Fix partial invalidation of TLBs in MCE code.
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
powerpc/xmon: Cleanup the breakpoint flags
powerpc/xmon: Enable HW instruction breakpoint on POWER8
powerpc/mm/thp: Use tlbiel if possible
powerpc/mm/thp: Remove code duplication
powerpc/mm/hugetlb: Sanity check gigantic hugepage count
powerpc/oprofile: Disable pagefaults during user stack read
powerpc/mm: Check for matching hpte without taking hpte lock
powerpc: Drop useless warning in eeh_init()
powerpc/powernv: Cleanup unused MCE definitions/declarations.
powerpc/eeh: Dump PHB diag-data early
powerpc/eeh: Recover EEH error on ownership change for BCM5719
powerpc/eeh: Set EEH_PE_RESET on PE reset
powerpc/eeh: Refactor eeh_reset_pe()
powerpc: Remove more traces of bootmem
powerpc/pseries: Initialise nvram_pstore_info's buf_lock
cxl: Name interrupts in /proc/interrupt
cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
...
Linus Torvalds [Fri, 12 Dec 2014 01:30:55 +0000 (17:30 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"The most notable change for this pull request is the ftrace rework
from Heiko. It brings a small performance improvement and the ground
work to support a new gcc option to replace the mcount blocks with a
single nop.
Two new s390 specific system calls are added to emulate user space
mmio for PCI, an artifact of the how PCI memory is accessed.
Two patches for the memory management with changes to common code.
For KVM mm_forbids_zeropage is added which disables the empty zero
page for an mm that is used by a KVM process. And an optimization,
pmdp_get_and_clear_full is added analog to ptep_get_and_clear_full.
Some micro optimization for the cmpxchg and the spinlock code.
And as usual bug fixes and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
s390/cputime: fix 31-bit compile
s390/scm_block: make the number of reqs per HW req configurable
s390/scm_block: handle multiple requests in one HW request
s390/scm_block: allocate aidaw pages only when necessary
s390/scm_block: use mempool to manage aidaw requests
s390/eadm: change timeout value
s390/mm: fix memory leak of ptlock in pmd_free_tlb
s390: use local symbol names in entry[64].S
s390/ptrace: always include vector registers in core files
s390/simd: clear vector register pointer on fork/clone
s390: translate cputime magic constants to macros
s390/idle: convert open coded idle time seqcount
s390/idle: add missing irq off lockdep annotation
s390/debug: avoid function call for debug_sprintf_*
s390/kprobes: fix instruction copy for out of line execution
s390: remove diag 44 calls from cpu_relax()
s390/dasd: retry partition detection
s390/dasd: fix list corruption for sleep_on requests
s390/dasd: fix infinite term I/O loop
s390/dasd: remove unused code
...
Linus Torvalds [Thu, 11 Dec 2014 22:27:06 +0000 (14:27 -0800)]
Merge git://git./linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
Peter Wu [Thu, 11 Dec 2014 12:51:20 +0000 (13:51 +0100)]
HID: logitech-hidpp: disable io in probe error path
Balance a hid_device_io_start() call with hid_device_io_stop() in the
error path. This avoids processing of HID reports when the probe fails
which possibly leads to invalid memory access in hid_device_probe() as
report_enum->report_id_hash might already be freed via
hid_close_report().
hid_set_drvdata() is called before wtp_allocate, be consistent and clear
drvdata too on the error path of wtp_allocate.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Peter Wu [Thu, 11 Dec 2014 12:51:19 +0000 (13:51 +0100)]
HID: logitech-hidpp: add boundary check for name retrieval
The HID response has a limited size. Do not trust the value returned by
hardware, check that it really fits in the message.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Peter Wu [Thu, 11 Dec 2014 12:51:18 +0000 (13:51 +0100)]
HID: logitech-hidpp: check name retrieval return code
hidpp_devicenametype_get_device_name() may return a negative value on
protocol errors (for example, when the device is powered off).
Explicitly check this condition to avoid a long-running loop.
(0 cannot be returned as __name_length - index > 0, but check for it
anyway as it would otherwise result in an infinite loop.)
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Peter Wu [Thu, 11 Dec 2014 12:51:17 +0000 (13:51 +0100)]
HID: logitech-hidpp: do not return the name length
We do not make any use of the actual name length get through
hidpp_get_device_name(). Original patch by Benjamin Tissoires, this
patch also replaces a (now) unnecessary goto by return NULL.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jason Gerecke [Thu, 11 Dec 2014 00:26:04 +0000 (16:26 -0800)]
HID: wacom: Report input events for each finger on generic devices
The existing generic touch code only reports events after reading an
entire HID report, which practically means that only data about the last
contact in a report will ever be provided to userspace. This patch uses
a trick from hid-multitouch.c to discover what type of field is at the
end of each contact; when such a field is encountered all the stored
contact data will be reported.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tony Lindgren [Tue, 16 Sep 2014 20:50:01 +0000 (13:50 -0700)]
pstore-ram: Allow optional mapping with pgprot_noncached
On some ARMs the memory can be mapped pgprot_noncached() and still
be working for atomic operations. As pointed out by Colin Cross
<ccross@android.com>, in some cases you do want to use
pgprot_noncached() if the SoC supports it to see a debug printk
just before a write hanging the system.
On ARMs, the atomic operations on strongly ordered memory are
implementation defined. So let's provide an optional kernel parameter
for configuring pgprot_noncached(), and use pgprot_writecombine() by
default.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Rob Herring [Fri, 12 Sep 2014 18:32:24 +0000 (11:32 -0700)]
pstore-ram: Fix hangs by using write-combine mappings
Currently trying to use pstore on at least ARMs can hang as we're
mapping the peristent RAM with pgprot_noncached().
On ARMs, pgprot_noncached() will actually make the memory strongly
ordered, and as the atomic operations pstore uses are implementation
defined for strongly ordered memory, they may not work. So basically
atomic operations have undefined behavior on ARM for device or strongly
ordered memory types.
Let's fix the issue by using write-combine variants for mappings. This
corresponds to normal, non-cacheable memory on ARM. For many other
architectures, this change does not change the mapping type as by
default we have:
#define pgprot_writecombine pgprot_noncached
The reason why pgprot_noncached() was originaly used for pstore
is because Colin Cross <ccross@android.com> had observed lost
debug prints right before a device hanging write operation on some
systems. For the platforms supporting pgprot_noncached(), we can
add a an optional configuration option to support that. But let's
get pstore working first before adding new features.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Colin Cross <ccross@android.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[tony@atomide.com: updated description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Thu, 11 Dec 2014 21:20:50 +0000 (13:20 -0800)]
Merge tag 'sound-3.19-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This became a fairly large pull request. In addition to the usual
driver updates / fixes, there have been a high amount of cleanups in
ASoC area, as well as control API helpers and kernel documentations
fixes touching through the whole tree.
In the driver side, the biggest changes are the support for new Intel
SoC found on new x86 machines, and the updates of FireWire dice and
oxfw drivers.
Some remarkable items are below:
ALSA core:
- PCM mmap code cleanup, removal of arch-dependent codes
- PCM xrun injection support
- PCM hwptr tracepoint support
- Refactoring of snd_pcm_action(), simplification of PCM locking
- Robustified sequecner auto-load functionality
- New control API helpers and lots of cleanups along with them
- Lots of kerneldoc fixes and cleanups
USB-audio:
- The mixer resume code was largely rewritten, and the devices with
quirks are resumed properly.
- New hardware support: Focusrite Scarlett, Digidesign Mbox1,
Denon/Marantz DACs, Zoom R16/24
FireWire:
- DICE driver updates with better duplex and sync support, including
MIDI support
- New OXFW driver for Oxford Semiconductor FW970/971 chipset,
including the previous LaCie Speakers device. Fullduplex and MIDI
support included as well as DICE driver.
HD-audio:
- Refactoring the driver-caps quirk handling in snd-hda-intel
- More consistent control names representing the topology better
- Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
fix, ASUS Z99He laptop EAPD
ASoC:
- Conversion of AC'97 drivers to use regmap, bringing us closer to
the removal of the ASoC level I/O code
- Clean up a lot of old drivers that were open coding things that
have subsequently been implemented in the core
- Some DAPM performance improvements
- Removal of the now seldom used CODEC mutex
- Lots of updates for the newer Intel SoC support, including support
for the DSP and some Cherrytrail and Braswell machine drivers
- Support for Samsung boards using rt5631 as the CODEC
- Removal of the obsolete
AFEB9260 machine driver
- Driver support for the TI TS3A227E headset driver used in some
Chrombeooks
Others:
- ASIHPI driver update and cleanups
- Lots of dev_*() printk conversions
- Lots of trivial cleanups for the codes spotted by Coccinelle"
* tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
ALSA: pcxhr: NULL dereference on probe failure
ALSA: lola: NULL dereference on probe failure
ALSA: hda - Add "eapd" model string for
AD1986A codec
ALSA: hda - Add EAPD fixup for ASUS Z99He laptop
ALSA: oxfw: Add hwdep interface
ALSA: oxfw: Add support for capture/playback MIDI messages
ALSA: oxfw: add support for capturing PCM samples
ALSA: oxfw: Add support AMDTP in-stream
ALSA: oxfw: Add support for Behringer/Mackie devices
ALSA: oxfw: Change the way to start stream
ALSA: oxfw: Add proc interface for debugging purpose
ALSA: oxfw: Change the way to make PCM rules/constraints
ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation
ALSA: oxfw: Change the way to name card
ALSA: dice: Add support for MIDI capture/playback
ALSA: dice: Add support for capturing PCM samples
ALSA: dice: Support for non SYT-Match sampling clock source mode
ALSA: dice: Add support for duplex streams with synchronization
ALSA: dice: Change the way to start stream
ALSA: jack: Add dummy snd_jack_set_key() definition
...
Linus Torvalds [Thu, 11 Dec 2014 21:06:58 +0000 (13:06 -0800)]
Merge tag 'devicetree-for-linus' of git://git./linux/kernel/git/glikely/linux
Pull devicetree changes from Grant Likely:
"Lots of activity in the devicetree code for v3.18. Most of it is
related to getting all of the overlay support code in place, but there
are other important things in there.
Highlights:
- OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those
subsystems can now respond to live changes to the device tree.
- CONFIG_OF_OVERLAY method for applying live changes to the device
tree
- Removal of the of_allnodes list. This used to be used to iterate
over all the nodes in the device tree, but it is unnecessary
because the same thing can be done by iterating over the list of
child pointers. Getting rid of of_allnodes saves some memory and
avoids the possibility of of_allnodes being sorted differently from
the child lists.
- Support for retrieving original DTB blob via sysfs. Needed by
kexec.
- More unittests
- Documentation and minor bug fixes"
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits)
of: Delete unnecessary check before calling "of_node_put()"
of: Drop ->next pointer from struct device_node
spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y
of: support passing console options with stdout-path
of: add optional options parameter to of_find_node_by_path()
of: Add bindings for chosen node, stdout-path
of: Remove unneeded and incorrect MODULE_DEVICE_TABLE
ARM: dt: fix up PL011 device tree bindings
of: base, fix of_property_read_string_helper kernel-doc
of: remove select of non-existant OF_DEVICE config symbol
spi/of: Add OF notifier handler
spi/of: Create new device registration method and accessors
i2c/of: Add OF_RECONFIG notifier handler
i2c/of: Factor out Devicetree registration code
of/overlay: Add overlay unittests
of/overlay: Introduce DT overlay support
of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type
of/reconfig: Always use the same structure for notifiers
of/reconfig: Add debug output for OF_RECONFIG notifiers
of/reconfig: Add empty stubs for the of_reconfig methods
...
Corey Minyard [Thu, 20 Nov 2014 13:19:44 +0000 (07:19 -0600)]
ipmi: Check the BT interrupt enable periodically
On a reset, the BMC may reset the BT enable in the processor
registers (different than the global enables in the BMC). Check
it periodically and fix it if necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Tony Rex <tony.rex@ericsson.com>
Tested-by: Magnus Johansson E <magnus.e.johansson@ericsson.com>
Corey Minyard [Wed, 19 Nov 2014 17:47:17 +0000 (11:47 -0600)]
ipmi: Fix attention handling for system interfaces
If an attention came in while handling a message response, it
could cause the state machine to go into the wrong mode and lock
things up if the state machine wasn't in normal mode. So if the
state machine is not in normal mode, save the attention flag for
later.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Tony Rex <tony.rex@ericsson.com>
Tested-by: Magnus Johansson E <magnus.e.johansson@ericsson.com>
Cc: Per Fogelström <per.fogelstrom@ericsson.com>
Corey Minyard [Wed, 19 Nov 2014 10:03:26 +0000 (04:03 -0600)]
ipmi: Periodically check to see if irqs and messages are set right
The BMC can be reset while we are running; that means the interrupt
and event message buffer settings may be wrong. So periodically
check to see if these values are correct, and fix them if they
are wrong.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Tony Rex <tony.rex@ericsson.com>
Tested-by: Magnus Johansson E <magnus.e.johansson@ericsson.com>
Jeremy Kerr [Wed, 12 Nov 2014 07:41:05 +0000 (15:41 +0800)]
drivers/char/ipmi: Add powernv IPMI driver
This change adds an initial IPMI driver for powerpc OPAL firmware. The
interface is exposed entirely through firmware: we have two functions to
send and receive IPMI messages, and an interrupt notification from the
firmware to signify that a message is available.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Mon, 19 Mar 2012 21:00:55 +0000 (16:00 -0500)]
ipmi: Add SMBus interface driver (SSIF)
This patch adds the SMBus interface to the IPMI driver.
Signed-off-by: Corey Minyard <minyard@acm.org>
Documentation/IPMI.txt | 32
drivers/char/ipmi/Kconfig | 11
drivers/char/ipmi/Makefile | 1
drivers/char/ipmi/ipmi_smb.c | 1737 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 1769 insertions(+), 12 deletions(-)
Corey Minyard [Fri, 7 Nov 2014 13:57:31 +0000 (07:57 -0600)]
ipmi: Remove the now unused priority from SMI sender
Since the queue was moved into the message handler, the priority
field is now irrelevant.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Thu, 6 Nov 2014 23:01:59 +0000 (17:01 -0600)]
ipmi: Remove the now unnecessary message queue
A message queue was added to the message handler, so the SMI
interfaces only need to handle one message at a time. Pull out
the message queue. This also leads to some significant
simplification in the shutdown of an interface, since the
message handler now does a lot of the cleanup.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Thu, 6 Nov 2014 22:58:48 +0000 (16:58 -0600)]
ipmi: Make the message handler easier to use for SMI interfaces
The message handler expected the SMI interface to keep a queue of
messages, but that was kind of silly, the queue would be easier to
manage in the message handler itself. As part of that, fix the
message cleanup to make sure no messages are outstanding when an
SMI interface is unregistered. This makes it easier for an SMI
interface to unregister, it just has to call ipmi_unregister_smi()
first and all processing from the message handler will be cleaned
up.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Fri, 7 Nov 2014 02:52:24 +0000 (20:52 -0600)]
ipmi: Move message sending into its own function
Getting ready for a transmit queue.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Fri, 7 Nov 2014 02:48:02 +0000 (20:48 -0600)]
ipmi: rename waiting_msgs to waiting_rcv_msgs
To avoid confusion with the coming transmit message queue.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Fri, 7 Nov 2014 01:06:00 +0000 (19:06 -0600)]
ipmi: Fix handling of BMC flags
The handling of BMC flags wasn't quite right in a few places, mainly
around enabling and disabling interrupts in the BMC. Clean up the
code and fix the handling of the flags.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Fri, 7 Nov 2014 02:11:40 +0000 (20:11 -0600)]
ipmi: Initialize BMC device attributes
This avoids an oops at initialization time.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Sanjeev <singhsan@codeaurora.org>
trenn@suse.de [Tue, 14 Oct 2014 14:40:23 +0000 (16:40 +0200)]
ipmi: Unregister previously registered driver in error case
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Fri, 10 Oct 2014 22:47:04 +0000 (17:47 -0500)]
ipmi: Use the proper type for acpi_handle
Minor cleanup, don't use a void pointer, use the right type.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Fri, 10 Oct 2014 22:45:45 +0000 (17:45 -0500)]
ipmi: Fix a bug in hot add/remove
There was a wrong variable used in the name parsing.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Sat, 11 Oct 2014 03:11:05 +0000 (22:11 -0500)]
ipmi: Remove useless sysfs_name parameters
It was always "bmc", so just hardcode it. It makes no sense to
pass that in.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Sat, 11 Oct 2014 02:54:03 +0000 (21:54 -0500)]
ipmi: clean up the device handling for the bmc device
Embed the platform device in the bmc device instead of externally
allocating it, use more proper form for creating the device
attributes, and other general cleanups.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Thu, 9 Oct 2014 12:20:32 +0000 (07:20 -0500)]
ipmi: Move the address source to string to ipmi-generic code
It was in the system interface driver, but is generic functionality.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Thu, 9 Oct 2014 12:12:08 +0000 (07:12 -0500)]
ipmi: Ignore SSIF in the PNP handling
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Corey Minyard [Thu, 11 Dec 2014 21:03:46 +0000 (15:03 -0600)]
Merge branch 'topic/opal-ipmi' of git://git./linux/kernel/git/mpe/linux into for-linus
Changes needed for the powernv IPMI device driver.
Linus Torvalds [Thu, 11 Dec 2014 20:46:32 +0000 (12:46 -0800)]
Merge tag 'fbdev-3.19' of git://git./linux/kernel/git/tomba/linux
Pull fbdev updates from Tomi Valkeinen:
- support for mx6sl and mx6sx
- OMAP HDMI audio rewrite to make it finally work
- OMAP video PLL work to prepare for new DRA7xx SoCs
- simplefb DT related improvements
* tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (81 commits)
video: uvesafb: Deletion of an unnecessary check before the function call "platform_device_put"
video: fbdev-VIA: Deletion of an unnecessary check before the function call "framebuffer_release"
video: fbdev-MMP: Deletion of an unnecessary check before the function call "mmp_unregister_path"
video: mx3fb: Deletion of an unnecessary check before the function call "backlight_device_unregister"
video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter"
video: fbdev-SIS: Deletion of unnecessary checks before the function call "pci_dev_put"
video: smscufx: Deletion of unnecessary checks before the function call "vfree"
video: udlfb: Deletion of unnecessary checks before the function call "vfree"
video: uvesafb: Deletion of an unnecessary check before the function call "uvesafb_free"
video: fbdev-LCDC: Deletion of an unnecessary check before the function call "vfree"
video: fbdev: arkfb: suppress build warning
video: fbdev: s3fb: suppress build warning
video: fbdev: vt8623fb: suppress build warning
OMAPDSS: hdmi5: Fix bit field for IEC958_AES2_CON_SOURCE
OMAPDSS: hdmi: Remove __exit qualifier from hdmi_uninit_output()
OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback
OMAPDSS: Remove all references to obsolete HDMI audio callbacks
ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio
OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
...
Linus Torvalds [Thu, 11 Dec 2014 20:20:31 +0000 (12:20 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio: virtio 1.0 support, misc patches
This adds a lot of infrastructure for virtio 1.0 support. Notable
missing pieces: virtio pci, virtio balloon (needs spec extension),
vhost scsi.
Plus, there are some minor fixes in a couple of places.
Note: some net drivers are affected by these patches. David said he's
fine with merging these patches through my tree.
Rusty's on vacation, he acked using my tree for these, too"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits)
virtio_ccw: finalize_features error handling
virtio_ccw: future-proof finalize_features
virtio_pci: rename virtio_pci -> virtio_pci_common
virtio_pci: update file descriptions and copyright
virtio_pci: split out legacy device support
virtio_pci: setup config vector indirectly
virtio_pci: setup vqs indirectly
virtio_pci: delete vqs indirectly
virtio_pci: use priv for vq notification
virtio_pci: free up vq->priv
virtio_pci: fix coding style for structs
virtio_pci: add isr field
virtio: drop legacy_only driver flag
virtio_balloon: drop legacy_only driver flag
virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1
virtio: allow finalize_features to fail
virtio_ccw: legacy: don't negotiate rev 1/features
virtio: add API to detect legacy devices
virtio_console: fix sparse warnings
vhost: remove unnecessary forward declarations in vhost.h
...
Linus Torvalds [Thu, 11 Dec 2014 20:09:37 +0000 (12:09 -0800)]
Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox framework updates from Jassi Brar.
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
Mailbox: Add support for Platform Communication Channel
mailbox/omap: adapt to the new mailbox framework
mailbox: add tx_prepare client callback
mailbox: Don't unnecessarily re-arm the polling timer
Linus Torvalds [Thu, 11 Dec 2014 20:03:34 +0000 (12:03 -0800)]
Merge tag 'spi-v3.19' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Not a huge amount going on this release, mainly new drivers (there's a
couple more waiting that didn't quite make the cut for this release
too):
- An interface for querying if the current transfer is the last in a
message, allowing controllers that need special handling for the
final transfer to use the core message parsing.
- Support for Amlogic Meson SPIFC, Imagination Technologies SFPI,
Intel Quark X1000 and Samsung Exynos 7 controllers"
* tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (38 commits)
spi/s3c64xx: Remove redundant runtime PM management
spi: fsl-spi: remove unused variable assignment
spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg()
spi: core: Do not mangle error code from kthread_run()
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use
spi: fsl-(e)spi: migrate to generic master queueing
spi/txx9: Deletion of an unnecessary check before the function call "clk_disable"
spi: cadence: Fix 3-to-8 mux mode
spi: cadence: Init HW after reading devicetree attributes
spi: meson: Select REGMAP_MMIO
spi: s3c64xx: add support for exynos7 SPI controller
spi: spi-pxa2xx: SPI support for Intel Quark X1000
spi: meson: meson_spifc_setup_speed() can be static
spi: spi-pxa2xx: Add helpers for regiseters' accessing
spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter list
spi: atmel: introduce probe deferring
spi: atmel: remove compat for non DT board when requesting dma chan
spi: meson: Add support for Amlogic Meson SPIFC
spi: meson: Add device tree bindings documentation for SPIFC
spi: core: Add spi_transfer_is_last() helper
...