OSDN Git Service
Adrian Bunk [Fri, 13 May 2005 13:28:08 +0000 (15:28 +0200)]
[ALSA] make code static
CA0106 driver,HDA Codec driver
This patch makes needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 13 May 2005 09:01:13 +0000 (11:01 +0200)]
[ALSA] Remove obsolete mixer control
AC97 Codec
Removed the obsolete mixer control for AD1985.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Fri, 13 May 2005 05:50:28 +0000 (07:50 +0200)]
[ALSA] usb-audio - avoid unnecessary double buffering
USB generic driver
When a USB packet boundary falls exactly on a buffer boundary, hwptr
remains at the end of the buffer which causes an overflow in the next
iteration and triggers double buffering although the next packet would
actually be contiguous.
This patch ensures that hwptr is always smaller than buffer_size.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 13 May 2005 05:44:13 +0000 (07:44 +0200)]
[ALSA] usb-audio - sanity-check sync feedback frequency values
USB generic driver
Check that the synchronization feedback frequency values returned by the
device are more or less near the nominal frequency.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Takashi Iwai [Thu, 12 May 2005 14:49:45 +0000 (16:49 +0200)]
[ALSA] Rename pci_vendor/pci_device to pci_subvendor/pci_subdevice
HDA Codec driver,HDA generic driver
Renamed pci_vendor/pci_device fields to pci_subvendor/pci_subdevice.
They are really PCI subsystem IDs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 12 May 2005 13:00:41 +0000 (15:00 +0200)]
[ALSA] Add support of VIA VT8251/VT8237A HD-Audio controllers
Documentation,HDA Intel driver
Added the support of VIA VT8251/VT8237A HD-Audio controllers.
They are (almost) compatible with Intel ICH6/7.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Frederick Li [Thu, 12 May 2005 12:55:20 +0000 (14:55 +0200)]
[ALSA] Adding support for ATI IXP450 HD Audio device support
Documentation,HDA Intel driver
This patch changes the Intel HD Audio device driver to include
the support of HD Audio device embedded in ATI south bridge
IXP450. Because the design of ATI chipset follows intel HD Audio
specification 1.0, the programming method is the same as that
of intel HD Audio device exception one minor change which requires
to enable snoop for DMA transport. There are 3 changes that have been
made to hda_intel.c file.
1. Added device ID for ATI HD Audio device;
2. Increase maximum CODEC supported to 4;
3. Enable snoop during the driver initialization.
Signed-off-by: Frederick Li <fli@ati.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 12 May 2005 12:51:12 +0000 (14:51 +0200)]
[ALSA] Add test model for debugging ALC880 devices
HDA Codec driver
Added 'test' model for testing/debugging the devices with ALC880 codec.
This model is built only when CONFIG_SND_DEBUG is set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 12 May 2005 12:31:49 +0000 (14:31 +0200)]
[ALSA] Add ASUS Z71V support
Documentation,HDA Codec driver
Added the ASUS Z71V (or similar) laptop support.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 12 May 2005 12:26:27 +0000 (14:26 +0200)]
[ALSA] Add position_fix module option
Documentation,HDA Intel driver
Added position_fix module option to HDA-intel driver for fixing up
the DMA position (possibly hardware-) bugs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjala [Thu, 12 May 2005 12:20:57 +0000 (14:20 +0200)]
[ALSA] maestro3: HP OmniBook HW volume button magic
Maestro3 driver
Some HP OmniBook laptops (500 and 6000 at least) require some GPIO magic
before the HW volume buttons work. This patch makes them work mostly.
Something is still missing to make them work perfectly. However I have been
unable to figure out what exactly.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjala [Thu, 12 May 2005 12:19:32 +0000 (14:19 +0200)]
[ALSA] maestro3: Add HW volume button support
Maestro3 driver
Add support for hardware volume buttons.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjala [Thu, 12 May 2005 12:14:28 +0000 (14:14 +0200)]
[ALSA] maestro3: Fix interrupt ack and disable
Maestro3 driver
Due to a typo interrupts were never actually acked or disabled.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Russell King [Thu, 12 May 2005 12:04:59 +0000 (14:04 +0200)]
[ALSA] ARM AACI primecell driver
ARM,/arm/Makefile,ARM AACI PL041 driver
Add support for the ARM AACI Primecell, which provides an AC'97
based interface. This driver only provides playback support.
This has been extensively tested with an LM4549 AC'97 codec.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Russell King [Thu, 12 May 2005 08:25:58 +0000 (10:25 +0200)]
[ALSA] ARM DMA subsystem
ARM DMA routines
The patch below adds a convenient re-usable shim around the extended
ARM DMA API, and is used by several ARM ALSA drivers.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mikael Magnusson [Wed, 11 May 2005 09:13:26 +0000 (11:13 +0200)]
[ALSA] emu10k1 - add SB0060 to emu_chip_details
EMU10K1/EMU10K2 driver
The following patch adds SB0060 to emu_chip_details.
Signed-off-by: Mikael Magnusson <mikaelmagnusson@glocalnet.net>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Tue, 10 May 2005 12:51:40 +0000 (14:51 +0200)]
[ALSA] usb-audio - bind to control interface instead of usb_device
USB generic driver
Bind the device files to the (first) audio control interface instead of
the entire USB device.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Tue, 10 May 2005 12:50:31 +0000 (14:50 +0200)]
[ALSA] ac97 - enable multichannel output on AD198x codecs
AC97 Codec
The code for AD1980/AD1985/AD1986 codecs forgot to enable the code to
switch the jack sharing bits on AD1888-compatible codecs.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Tue, 10 May 2005 12:48:37 +0000 (14:48 +0200)]
[ALSA] ac97 - fix Mic jack sharing on AD1888 codecs
AC97 Codec
The code for modifying the center/LFE disable bit on AD1888 codecs
accidentally toggled the mute split bit instead.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Tue, 10 May 2005 12:47:38 +0000 (14:47 +0200)]
[ALSA] usb-audio - add a proc file for Audigy 2 NX jack status
USB generic driver
This patch adds a proc file for the SB Audigy 2 NX which shows the
connection status of the various jacks. Unfortunately, no SPDIF input
frequency (yet).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 9 May 2005 07:21:28 +0000 (09:21 +0200)]
[ALSA] usb-audio - remove superfluous LIRC ioctls
USB generic driver
The ioctls for LIRC compatibility can be removed because the
infrastructure and detection stuff is better done in user space.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 9 May 2005 07:20:31 +0000 (09:20 +0200)]
[ALSA] usb-audio - enable high speed (not) on Audigy 2 NX
USB generic driver
The SB Audigy 2 NX needs a special boot-up command before it works in
high speed mode.
However, we don't actually enable it yet because high speed
synchronization doesn't seem to work with this device.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
James Courtier-Dutton [Sun, 8 May 2005 20:22:27 +0000 (22:22 +0200)]
[ALSA] Fix snd-usb-audio dependency on snd-hwdep.
USB
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Arnaud Patard [Sat, 7 May 2005 16:51:51 +0000 (18:51 +0200)]
[ALSA] cs4281 - fix DLLRDY not seen problem
CS4281 driver
Reset the FPDN bit of the EPPMC register if needed.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Sat, 7 May 2005 14:13:40 +0000 (16:13 +0200)]
[ALSA] Increase capture buffer sizes.
EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Sat, 7 May 2005 13:34:13 +0000 (15:34 +0200)]
[ALSA] Implement different capture sources.
EMU10K1/EMU10K2 driver
e.g. When HD Capture source is set to SPDIF,
setting HD Capture channel to 0 captures from CDROM digital input.
setting HD Capture channel to 1 captures from SPDIF in.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Wed, 4 May 2005 15:26:28 +0000 (17:26 +0200)]
[ALSA] Support multiple capture rates on p16v.
EMU10K1/EMU10K2 driver
The capture rate does in fact vary, but it only captures anything if
the HD Capture source is set to I2S or AC97. I have not tested if the sound
is actually captured from an physical input of some type or not.
TODO: Get SPDIF capture working.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Wed, 4 May 2005 14:53:53 +0000 (16:53 +0200)]
[ALSA] Update A_SAMPLE_RATE register details.
EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Clemens Ladisch [Wed, 4 May 2005 12:56:04 +0000 (14:56 +0200)]
[ALSA] usb-audio - set sample rate attribute on Audigy 2 NX endpoints
USB generic driver
The SB Audigy 2 NX does not advertise the sample rate attribute in its
endpoint descriptors although it supports it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Tue, 3 May 2005 06:02:40 +0000 (08:02 +0200)]
[ALSA] usb-audio - Audigy 2 NX blinkenlights
USB generic driver
Adds mixer controls for the CMSS/Dolby Digital/Power LEDs
on the SB Audigy 2 NX.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 2 May 2005 06:58:31 +0000 (08:58 +0200)]
[ALSA] usb-audio - make SB remote control device LIRC compatible
USB generic driver
Add ioctls to the Sound Blaster remote control hwdep device so that it
can be used with LIRC.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 2 May 2005 06:55:54 +0000 (08:55 +0200)]
[ALSA] usb-audio - use only one packet in synchronization feedback URBs
USB generic driver
Do not use more than one packet in synchronization feedback URBs because
it would be pointless to send or receive more than one value at the same
time.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 2 May 2005 06:53:46 +0000 (08:53 +0200)]
[ALSA] usb-audio - use proper interval between synchronization packets
USB generic driver
Add sanity checks when reading the bRefresh value, and actually use it
for the synchronization packets instead of polling at 1000 Hz.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 2 May 2005 06:52:32 +0000 (08:52 +0200)]
[ALSA] usb-audio - allow type 0 extension units
USB generic driver
Extension units can have type 0, so do not ignore them when constructing
mixer controls.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 2 May 2005 06:51:26 +0000 (08:51 +0200)]
[ALSA] usb-audio - cache vendor/product IDs
USB generic driver
Cache the decoded values of idVendor/idProduct to get rid of most of
those ugly le16_to_cpu() calls.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 29 Apr 2005 14:29:28 +0000 (16:29 +0200)]
[ALSA] usb-audio - add Extigy/Audigy 2 NX remote control support
ALSA Core,USB generic driver
Add an hwdep interface that supports reading remote control data from
Sound Blaster Extigy and Audigy 2 NX devices.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 29 Apr 2005 14:26:14 +0000 (16:26 +0200)]
[ALSA] usb-audio - add mixer control notifications
USB generic driver
Add support for the optional status interrupt endpoint in audio control
interfaces, and translate USB status notifications into ALSA mixer
control notifications.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 29 Apr 2005 14:23:13 +0000 (16:23 +0200)]
[ALSA] usb-audio - move mixer data into separate struct
USB generic driver
Move all data related to audio control interfaces into a separate struct
local to usbmixer.c.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 29 Apr 2005 07:56:17 +0000 (09:56 +0200)]
[ALSA] usb-audio - reduce size of unitbitmap array
USB generic driver
Unit/terminal IDs are 8-bit integers, so the unitbitmap
variable does not need to be bigger than 256 bits.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Thu, 28 Apr 2005 07:31:53 +0000 (09:31 +0200)]
[ALSA] usb-audio - restrict Audigy 2 NX frequencies to 48/96 kHz
USB generic driver
On the SB Audigy 2 NX, frequency feedback doesn't quite work
when playing at 44.1 kHz, so temporarily disable this frequency.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Jaroslav Kysela [Wed, 27 Apr 2005 14:09:21 +0000 (16:09 +0200)]
ALSA CVS update
ALSA Version
1.0.9rc3
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Thomas Charbonnel [Mon, 25 Apr 2005 09:35:29 +0000 (11:35 +0200)]
[ALSA] hdsp - solved big endian problem
RME HDSP driver
ppc firmware upload fix
Signed-off-by: Thomas Charbonnel <thomas@undata.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Sergey Vlasov [Mon, 25 Apr 2005 09:34:33 +0000 (11:34 +0200)]
[ALSA] ac97 - add the 'Mic Front Input Switch' control (ALC850)
AC97 Codec
Add the 'Mic Front Input Switch' control to the mixer for ALC850.
Enabling this input is required for using the front panel microphone
connector with ASUS A8V motherboard.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Sergey Vlasov [Mon, 25 Apr 2005 09:22:20 +0000 (11:22 +0200)]
[ALSA] fix behaviour of ac97_enum_mixer elements
AC97 Codec
ac97_enum mixer elements (e.g., 'Capture Source') did not work because
of wrong bitmask calculation in snd_ac97_get_enum_double() and
snd_ac97_put_enum_double().
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1072
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 25 Apr 2005 08:34:13 +0000 (10:34 +0200)]
[ALSA] usb-audio - remove superfluous parameter
USB generic driver,USB USX2Y
This patch removes the superfluous driver parameter from the
disconnect functions.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 22 Apr 2005 13:49:52 +0000 (15:49 +0200)]
[ALSA] usb-audio - add selector unit names override for Audigy 2 NX
USB generic driver
Add a mechanism to specify source names of selector units,
and add such names for the SB Audigy 2 NX.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 22 Apr 2005 13:33:01 +0000 (15:33 +0200)]
[ALSA] usb-audio - show exact synchronous frequency in proc file
USB generic driver
In the streamX proc file, show the exact number of samples per
USB frame as 16.16 hexadecimal floating point value.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Fri, 22 Apr 2005 06:52:03 +0000 (08:52 +0200)]
[ALSA] usb-audio: add Audigy 2 NX control names
USB generic driver
Add a mixer control map for the SB Audigy 2 NX so
that we get meaningful mixer control names.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Takashi Iwai [Wed, 20 Apr 2005 18:54:43 +0000 (20:54 +0200)]
[ALSA] Add dxs_support entry for MSI K8T Neo-FIS2R
VIA82xx driver
Report by Ronny V. Vindenes <s864@ii.uib.no>
Add dxs_support=5 for MSI K8T Neo-FIS2R.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 20 Apr 2005 11:45:55 +0000 (13:45 +0200)]
[ALSA] Fix and cleanup of CM9880 auto-configuration
HDA Codec driver
Fix and cleanup of CM9880 automatic PIN configuration.
snd_hda_codec_setup_stream() doesn't do anything when NID is 0.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 20 Apr 2005 11:44:08 +0000 (13:44 +0200)]
[ALSA] Show PIN jack type
HDA generic driver
Show the jack type of each PIN default configuration entry.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 20 Apr 2005 11:43:00 +0000 (13:43 +0200)]
[ALSA] Fix a typo in comments
HDA generic driver
Fix a typo in comments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Karsten Wiese [Wed, 20 Apr 2005 08:12:35 +0000 (10:12 +0200)]
[ALSA] prevent oops & dead keyboard on usb unplugging while the device is being used
USB generic driver,USB USX2Y
Without this patch, some usb kobjects, which are parents to
the usx2y's kobjects can be freed before the usx2y's.
This led to an oops in get_kobj_path_length() and a dead
keyboard, when the usx2y's kobjects were freed.
The patch ensures the correct sequence.
Tested ok on kernel 2.6.12-rc2.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jesper Juhl [Wed, 20 Apr 2005 08:03:31 +0000 (10:03 +0200)]
[ALSA] trivial warning fix for emu10k1
EMU10K1/EMU10K2 driver
When building with gcc -W sound/pci/emu10k1/emupcm.c produces this little
warning in 2.6.12-rc2-mm3 :
sound/pci/emu10k1/emupcm.c:265: warning: 'inline' is not at beginning of
declaration
No big deal, but trivial to fix.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 15 Apr 2005 11:51:48 +0000 (13:51 +0200)]
[ALSA] Add dxs_support=5 for Insight P4-ITX
VIA82xx driver
Added dxs_support=5 entry for Insight P4-ITX.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Apr 2005 14:21:03 +0000 (16:21 +0200)]
[ALSA] Increase timer protocol number
ALSA Core
Increase the timer protocl number (to distinguish the fix for TREAD ioctls).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Apr 2005 11:37:13 +0000 (13:37 +0200)]
[ALSA] Misc clean up
HDA Codec driver
Misc clean up: move the definitions of constants for pinctl to a single place.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Apr 2005 11:36:24 +0000 (13:36 +0200)]
[ALSA] Remove dead code
HDA Codec driver
Removed the dead (duplicated) code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Apr 2005 11:35:51 +0000 (13:35 +0200)]
[ALSA] Add AD1981HD and AD1983 support
HDA Codec driver
Added the support of AD1981HD and AD1983 codecs.
Including the fix for
AD1986A.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matt [Wed, 13 Apr 2005 12:45:30 +0000 (14:45 +0200)]
[ALSA] add sigmatel codec support
HDA generic driver,HDA Codec driver
Add initial SigmaTel codec support for 9200 and 922x. Note that
this hda patch relies on the configuration default registers to
be set correctly (normally by BIOS/firmware) in order for it to
set up pin widgets properly. There's a test switch in the patch
so it will work with the SigmaTel reference boards that are usually
plugged into a system that doesn't set the configuration default
registers. It supports 2 channel analog out and line/mic in. I
plan to add >2 channel support and spdif support shortly.
Please apply.
Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matt [Wed, 13 Apr 2005 12:37:50 +0000 (14:37 +0200)]
[ALSA] hda: fix vref cap and ctl values
HDA Codec driver,HDA generic driver
Fix some vref defines so they are valid for the different bits in
the pin cap and pin control registers. Please apply.
Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 13 Apr 2005 12:32:57 +0000 (14:32 +0200)]
[ALSA] Improve the shared-jack handling on ac97
AC97 Codec
The handling of shared surround/clfe output jacks with line/mic-in
on some AC97 codecs is improved.
Instead of 'Line-In As Surround' or 'Mic As Center/LFE' switch, two
new enum controls are introduced: 'Channel Mode' and 'Surround Jack Mode'.
The formar changes the current output mode among 2, 4 and 6-channels.
The latter controls whether the jacks are shared or independent.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Wed, 13 Apr 2005 11:25:30 +0000 (13:25 +0200)]
[ALSA] replace SNDRV_PCM_HW_PARAMS_RUNTIME -> SNDRV_PCM_HW_PARAMS_NORESAMPLE
ALSA Core
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 12 Apr 2005 15:33:59 +0000 (17:33 +0200)]
[ALSA] Fix capture on OSS emulation
ALSA<-OSS emulation
Fix the noisy capture on some hardwares over OSS emulation.
Change back to avail_min = period_size for capture direction.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 12 Apr 2005 14:27:28 +0000 (16:27 +0200)]
[ALSA] Fix permissions in some /proc files
PCM Midlevel,CA0106 driver,EMU10K1/EMU10K2 driver
Fix by Guillaume Chazarain <guichaz@yahoo.fr>:
Some tunables in /proc have a write() function, but as their
permission does not reflect it, it can be confusing to the user.
So here is a patch that corrects the mode of those files. Note that I
have only tested the 'xrun_debug' entry.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 11 Apr 2005 15:03:03 +0000 (17:03 +0200)]
[ALSA] Fix compile warning
EMU10K1/EMU10K2 driver
Fix compile warnings regarding the unused variables/functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 11 Apr 2005 14:58:24 +0000 (16:58 +0200)]
[ALSA] Replace pci_module_init() with pci_register_driver()
Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver
EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver
RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver
Replace the obsolete pci_module_init() with pci_register_driver().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 11 Apr 2005 13:08:32 +0000 (15:08 +0200)]
[ALSA] Fix SPDIF rate with dxs_support=4
VIA82xx driver
Fix SPDIF rate setting with dxs_support=4. It should be 48k fixed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sergey Vlasov [Mon, 11 Apr 2005 13:04:33 +0000 (15:04 +0200)]
[ALSA] Support all sample rate conversion capabilities of DXS channels
Documentation,VIA82xx driver
Add support for full sample rate conversion capabilities of DXS
channels present in VIA VT8233/5/7 controllers:
- any sample rate in the 8000 ... 48000 Hz range is supported even if
the AC'97 codec supports only 48000 Hz output;
- different DXS channels can use different sample rates at the same
time (the controller performs required sample rate conversion and
mixing in hardware).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sergey Vlasov [Mon, 11 Apr 2005 12:17:19 +0000 (14:17 +0200)]
[ALSA] Add PCI ID for Gallant Odyssey Sound 4
FM801 driver
The Gallant Odyssey Sound 4 card is based on the ForteMedia FM801
chip, but has a different PCI ID.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adrian Bunk [Mon, 11 Apr 2005 12:11:00 +0000 (14:11 +0200)]
[ALSA] remove dead code
YMFPCI driver
This patch removes some dead code found by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Simone Zinanni [Mon, 11 Apr 2005 12:08:40 +0000 (14:08 +0200)]
[ALSA] Provides preliminary support for the Terratec Phase 28 card
ICE1712 driver
Provides preliminary support for the Terratec Phase 28 card.
Not extensively tested and probably buggy, but it seems to work.
Signed-off-by: Simone Zinanni <simone@develer.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
James Courtier-Dutton [Sun, 10 Apr 2005 13:43:35 +0000 (15:43 +0200)]
[ALSA] Fix typo in speaker routing. Now sound comes from the correct speakers
EMU10K1/EMU10K2 driver
when using the p16v HD device.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Sat, 9 Apr 2005 22:00:24 +0000 (00:00 +0200)]
[ALSA] Improve playback startup. Increase buffer size, and reduce xruns.
EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Sat, 9 Apr 2005 21:38:25 +0000 (23:38 +0200)]
[ALSA] Improve SPDIF playback via the P16V/CA0151 chip.
EMU10K1/EMU10K2 driver
Although we can set 44100 as the output rate, the SPDIF can do it, but the Analog output cannot.
The SPDIF has the bug, whereby the Left channel arrives one sample late, so although we don't do any resampling,
it is not good for AC3 non-audio output.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Sat, 9 Apr 2005 14:57:09 +0000 (16:57 +0200)]
[ALSA] Display SPDIF in status in proc fs 'spdif-in' file.
EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Takashi Iwai [Fri, 8 Apr 2005 13:05:13 +0000 (15:05 +0200)]
[ALSA] choose multi-channel jacks automatically
HDA Codec driver
Patch by C.L. Tien <cltien@cmedia.com.tw>:
The patch makes cm9880 to choose multi-channel jacks automatically.
1. I found the current code has basic_init, which already includes
necessary controls for 6-stack initialization, so I don't need
another model.
2. I add a new model 'auto' to let the driver find a. if there are
option real panel/front panel, b. the jacks to be used for multichannel.
Because the jack color are based on MS's channel sequence, so the 'auto'
model will pick the same jacks for multichannel MS uses. I did this to
hope to minimize users questions. These code can also be applied to other
codecs but I don't have any to test.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Fri, 8 Apr 2005 06:25:23 +0000 (08:25 +0200)]
[ALSA] virmidi - fix ioctl parameter passing when setting client name
ALSA sequencer
The last change to reduce stack usage did not adjust the parameter to
SNDRV_SEQ_IOCTL_SET_CLIENT_IOCTL which resulted in passing the address
of the pointer instead of the structure.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Sasha Khapyorsky [Thu, 7 Apr 2005 18:23:58 +0000 (20:23 +0200)]
[ALSA] MC97 registers reset
AC97 Codec
Separated ac97 registers reset for audio and modem (or both) as recommended
in AC97 spec.
Signed-off-by: Sasha Khapyorsky <sashak@smlink.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sasha Khapyorsky [Thu, 7 Apr 2005 18:22:58 +0000 (20:22 +0200)]
[ALSA] Fix MC97 codec initialization
AC97 Codec
This (especially 12000 -> 8000 sample rate replace) fix popular
'MC97 converters.. not ready' error with modem codecs initializations.
Signed-off-by: Sasha Khapyorsky <sashak@smlink.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sasha Khapyorsky [Thu, 7 Apr 2005 18:21:21 +0000 (20:21 +0200)]
[ALSA] Fix 'semaphore is not ready' problem with snd-intel8x0m
Intel8x0-modem driver
With some intel based ac97 modems codec access semaphore is not cleared
after 0x54 AC97 register (GPIO_STATUS) reads. This may causes problems
with newly applied modem mixer (Off-hook switch) and in other cases.
Signed-off-by: Sasha Khapyorsky <sashak@smlink.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 7 Apr 2005 13:53:20 +0000 (15:53 +0200)]
[ALSA] Add CM9780 support, fix CM9761 SPDIF
AC97 Codec
- Added CM9780 patch
- Fix the SPDIF support on CM9761/CM9780
- Allow the generic enum callback to pass any number (not power of 2)
as the value mask
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 7 Apr 2005 13:50:13 +0000 (15:50 +0200)]
[ALSA] Remove unused variables
AC97 Codec
Removed unused variables (the old control definitions).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 7 Apr 2005 13:48:42 +0000 (15:48 +0200)]
[ALSA] Check revision for the proper detection of audigy 2
EMU10K1/EMU10K2 driver
Check ther revision to detect non-listed audigy 2 boards.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Wed, 6 Apr 2005 07:47:02 +0000 (09:47 +0200)]
[ALSA] usb-audio - BOSS GS-10 PCM support
USB generic driver
This patch adds quirks to support 24-bit PCM I/O in the 'Advanced
Driver' mode of the BOSS GS-10.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Wed, 6 Apr 2005 07:43:59 +0000 (09:43 +0200)]
[ALSA] virmidi - fix ioctl parameter passing when creating seq port
ALSA sequencer
The last change to reduce stack usage did not adjust the parameter to
SNDRV_SEQ_IOCTL_CREATE_PORT which resulted in passing the address of
the pointer instead of the structure.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Jaroslav Kysela [Mon, 4 Apr 2005 14:44:58 +0000 (16:44 +0200)]
[ALSA] timer - added tread semaphore
Timer Midlevel
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Fri, 1 Apr 2005 11:14:14 +0000 (13:14 +0200)]
[ALSA] Add mixer map for Sound Blaster MP3+
USB generic driver
Added the mixer mapping for Sound Blaster MP3+
by Pavel Mihaylov <bin@bash.info>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Peter Zubaj [Fri, 1 Apr 2005 09:15:07 +0000 (11:15 +0200)]
[ALSA] Audigy SB0090 identification
EMU10K1/EMU10K2 driver
This add identification of Audigy 1 model SB0090 and fixes
problems with ac97 codec (mic not working).
Signed-off-by: Peter Zubaj <pzad@pobox.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Wed, 30 Mar 2005 14:22:01 +0000 (16:22 +0200)]
[ALSA] usb-audio - allow USB MIDI quirks to specify endpoints explicitly
USB generic driver
This patch reintroduces the check for endpoint numbers that are
specified explicitly in the quirk structure.
This check was accidentally dropped in the last rewrite of
snd_usbmidi_detect_endpoints().
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Takashi Iwai [Wed, 30 Mar 2005 12:40:25 +0000 (14:40 +0200)]
[ALSA] Fix the default id of multiple cards
EMU10K1/EMU10K2 driver
Fixed the default id string in case identical multiple cards exist.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 30 Mar 2005 12:22:25 +0000 (14:22 +0200)]
[ALSA] Use old default id strings for compatibility
EMU10K1/EMU10K2 driver
Use expliciitly the old default id strings for backward compatibility.
This will make 'alsactl restore' working again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lee Revell [Wed, 30 Mar 2005 12:04:34 +0000 (14:04 +0200)]
[ALSA] some docs for the new emu10k1 multichannel functionality
Documentation
Not complete, or even spell checked, but in case I don't get a chance to
work on it again before 1.0.9, here is what i have so far. It should go
in alsa-kernel/Documentation/emu10k1-jack.txt.
Signed-off-by: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lee Revell [Wed, 30 Mar 2005 11:51:18 +0000 (13:51 +0200)]
[ALSA] clean up card features
EMU10K1/EMU10K2 driver
This patch converts the emu10k1 driver to use the card capabilities
structure for some more things.
Not extensively tested but seems to work.
Signed-off-by: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 30 Mar 2005 11:49:06 +0000 (13:49 +0200)]
[ALSA] Fix memory leak
ALSA sequencer
Fixed memory leak by the last change of stack reduction.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 29 Mar 2005 14:33:28 +0000 (16:33 +0200)]
[ALSA] Fix the detection of resolution of ac97 controls
AC97 Codec
Fixed the detection of bit resolution of ac97 mixer controls.
This will fix the problem with TI ac97 codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
James Courtier-Dutton [Sun, 27 Mar 2005 13:00:54 +0000 (15:00 +0200)]
[ALSA] Added identification for the Audigy ES.
EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Sat, 26 Mar 2005 21:10:36 +0000 (22:10 +0100)]
[ALSA] Add's identification of the SB Live! Platinum [CT4760P]
EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Sat, 26 Mar 2005 18:35:29 +0000 (19:35 +0100)]
[ALSA] Adds Capture to P16V chip.
EMU10K1/EMU10K2 driver
One can select which capture source, but one cannot yet set volumes.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
ChenLi Tien [Thu, 24 Mar 2005 19:47:35 +0000 (20:47 +0100)]
[ALSA] fix multi-channel for model==full
HDA Codec driver
The patch_cm9880.c can't play side/C/B channels from front panel jacks.
I fixed it by adding select pin.
Signed-off-by: ChenLi Tien <cltien@cmedia.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>