OSDN Git Service
Colin Cross [Tue, 20 Jun 2017 20:54:44 +0000 (13:54 -0700)]
Add BINDER_GET_NODE_DEBUG_INFO ioctl
The BINDER_GET_NODE_DEBUG_INFO ioctl will return debug info on
a node. Each successive call reusing the previous return value
will return the next node. The data will be used by
libmemunreachable to mark the pointers with kernel references
as reachable.
Bug:
28275695
Change-Id: Idbbafa648a33822dc023862cd92b51a595cf7c1c
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Chris Redpath [Thu, 25 May 2017 14:27:07 +0000 (15:27 +0100)]
UPSTREAM: cpufreq: schedutil: Trace frequency only if it has changed
sugov_update_commit() calls trace_cpu_frequency() to record the
current CPU frequency if it has not changed in the fast switch case
to prevent utilities from getting confused (they may report that the
CPU is idle if the frequency has not been recorded for too long, for
example).
However, that may cause the tracepoint to be triggered quite often
for no real reason (if the frequency doesn't change, we will not
modify the last update time stamp and governor computations may
run again shortly when that happens), so don't do that (arguably, it
is done to work around a utilities bug anyway).
That allows code duplication in sugov_update_commit() to be reduced
somewhat too.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
(cherry picked from commit
38d4ea229d25d30be6bf41bcd6cd663a587866ca)
(conflicts with sugov_up_down_rate_limit resolved)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ia019dda29b8c1c4cf3553da75c88d066eb5674e9
Chris Redpath [Thu, 25 May 2017 14:24:58 +0000 (15:24 +0100)]
UPSTREAM: cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely
The way the schedutil governor uses the PELT metric causes it to
underestimate the CPU utilization in some cases.
That can be easily demonstrated by running kernel compilation on
a Sandy Bridge Intel processor, running turbostat in parallel with
it and looking at the values written to the MSR_IA32_PERF_CTL
register. Namely, the expected result would be that when all CPUs
were 100% busy, all of them would be requested to run in the maximum
P-state, but observation shows that this clearly isn't the case.
The CPUs run in the maximum P-state for a while and then are
requested to run slower and go back to the maximum P-state after
a while again. That causes the actual frequency of the processor to
visibly oscillate below the sustainable maximum in a jittery fashion
which clearly is not desirable.
That has been attributed to CPU utilization metric updates on task
migration that cause the total utilization value for the CPU to be
reduced by the utilization of the migrated task. If that happens,
the schedutil governor may see a CPU utilization reduction and will
attempt to reduce the CPU frequency accordingly right away. That
may be premature, though, for example if the system is generally
busy and there are other runnable tasks waiting to be run on that
CPU already.
This is unlikely to be an issue on systems where cpufreq policies are
shared between multiple CPUs, because in those cases the policy
utilization is computed as the maximum of the CPU utilization values
over the whole policy and if that turns out to be low, reducing the
frequency for the policy most likely is a good idea anyway. On
systems with one CPU per policy, however, it may affect performance
adversely and even lead to increased energy consumption in some cases.
On those systems it may be addressed by taking another utilization
metric into consideration, like whether or not the CPU whose
frequency is about to be reduced has been idle recently, because if
that's not the case, the CPU is likely to be busy in the near future
and its frequency should not be reduced.
To that end, use the counter of idle calls in the timekeeping code.
Namely, make the schedutil governor look at that counter for the
current CPU every time before its frequency is about to be reduced.
If the counter has not changed since the previous iteration of the
governor computations for that CPU, the CPU has been busy for all
that time and its frequency should not be decreased, so if the new
frequency would be lower than the one set previously, the governor
will skip the frequency update.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Joel Fernandes <joelaf@google.com>
(cherry picked from commit
b7eaf1aab9f8bd2e49fceed77ebc66c1b5800718)
(simple CPUFREQ_RT_DL vs CPUFREQ_DL usage conflicts)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: I531ec02c052944ee07a904dc2a25c59948ee762b
Chris Redpath [Thu, 25 May 2017 14:22:59 +0000 (15:22 +0100)]
UPSTREAM: cpufreq: schedutil: Refactor sugov_next_freq_shared()
The loop in sugov_next_freq_shared() contains an if block to skip the
loop for the current CPU. This turns out to be an unnecessary
conditional in the scheduler's hot-path for every CPU in the policy.
It would be better to drop the conditional and make the loop treat all
the CPUs in the same way. That would eliminate the need of calling
sugov_iowait_boost() at the top of the routine.
To keep the code optimized to return early if the current CPU has RT/DL
flags set, move the flags check to sugov_update_shared() instead in
order to avoid the function call entirely.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit
cba1dfb57b94c234728b689d9b00d4267fa1a879)
(modified for SCHED_CPUFREQ_DL vs SCHED_CPUFREQ_RT)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ie046fdc8eda46821356750edd0fb6f7d077af363
Chris Redpath [Thu, 25 May 2017 14:15:33 +0000 (15:15 +0100)]
UPSTREAM: cpufreq: schedutil: Fix per-CPU structure initialization in sugov_start()
sugov_start() only initializes struct sugov_cpu per-CPU structures
for shared policies, but it should do that for single-CPU policies too.
That in particular makes the IO-wait boost mechanism work in the
cases when cpufreq policies correspond to individual CPUs.
Fixes:
21ca6d2c52f8 (cpufreq: schedutil: Add iowait boosting)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
(cherry picked from commit
4296f23ed49a15d36949458adcc66ff993dee2a8)
(we use SCHED_CPUFREQ_DL instead of SCHED_CPUFREQ_RT in cpu->flags)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: I5b837a0ee4432115d85caa1a9808ea61e1e1b07f
Viresh Kumar [Thu, 2 Mar 2017 08:33:21 +0000 (14:03 +0530)]
UPSTREAM: cpufreq: schedutil: Pass sg_policy to get_next_freq()
get_next_freq() uses sg_cpu only to get sg_policy, which the callers of
get_next_freq() already have. Pass sg_policy instead of sg_cpu to
get_next_freq(), to make it more efficient.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit
655cb1ebff4b7918fc560502c3297af2d3c7d114)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ia210058da32930a6cdb18258aa679cd1a44a747e
Chris Redpath [Thu, 25 May 2017 14:12:38 +0000 (15:12 +0100)]
UPSTREAM: cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
cached_raw_freq applies to the entire cpufreq policy and not individual
CPUs. Apart from wasting per-cpu memory, it is actually wrong to keep it
in struct sugov_cpu as we may end up comparing next_freq with a stale
cached_raw_freq of a random CPU.
Move cached_raw_freq to struct sugov_policy.
Fixes:
5cbea46984d6 (cpufreq: schedutil: map raw required frequency to driver frequency)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry-picked from
6c4f0fa643cb9e775dcc976e3db00d649468ff1d)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ie91420f710819b383947f9031da9be1f3bb7f636
Viresh Kumar [Thu, 24 Nov 2016 08:21:11 +0000 (13:51 +0530)]
UPSTREAM: cpufreq: schedutil: Rectify comment in sugov_irq_work() function
This patch rectifies a comment present in sugov_irq_work() function to
follow proper grammar.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit
d06e622d3d9206e6a2cc45a0f9a3256da8773ff4)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Iaf996445d411725639d511432cc424086892a146
Chris Redpath [Thu, 25 May 2017 14:10:26 +0000 (15:10 +0100)]
UPSTREAM: cpufreq: schedutil: irq-work and mutex are only used in slow path
Execute the irq-work specific initialization/exit code only when the
fast path isn't available.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit
21ef57297b15a49b0c4dd4e7135c1a08e9a29a1c)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Icfd68f455ef71846d799fcd2d8ec6aa1bf59573e
Chris Redpath [Thu, 25 May 2017 14:06:27 +0000 (15:06 +0100)]
UPSTREAM: cpufreq: schedutil: enable fast switch earlier
The fast_switch_enabled flag will be used by both sugov_policy_alloc()
and sugov_policy_free() with a later patch.
Prepare for that by moving the calls to enable and disable it to the
beginning of sugov_init() and end of sugov_exit().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit
4a71ce4348bb61740d411822357061f8bf870f4c)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ia174f423ca02d59360657ac2e77a5098ce5cf99c
Chris Redpath [Thu, 25 May 2017 14:04:04 +0000 (15:04 +0100)]
UPSTREAM: cpufreq: schedutil: Avoid indented labels
Switch to the more common practice of writing labels.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit
8e2ddb03643eb9d0bc4926946d7ce0d308eef0a5)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ida75c99cf3dff5cae24d3866454c83bcdb3385b9
Greg Kroah-Hartman [Sat, 15 Jul 2017 11:29:08 +0000 (13:29 +0200)]
Merge 4.4.77 into android-4.4
Changes in 4.4.77
fs: add a VALID_OPEN_FLAGS
fs: completely ignore unknown open flags
driver core: platform: fix race condition with driver_override
bgmac: reset & enable Ethernet core before using it
mm: fix classzone_idx underflow in shrink_zones()
tracing/kprobes: Allow to create probe with a module name starting with a digit
drm/virtio: don't leak bo on drm_gem_object_init failure
usb: dwc3: replace %p with %pK
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Add USB quirk for HVR-950q to avoid intermittent device resets
usb: usbip: set buffer pointers to NULL after free
usb: Fix typo in the definition of Endpoint[out]Request
mac80211_hwsim: Replace bogus hrtimer clockid
sysctl: don't print negative flag for proc_douintvec
sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec
pinctrl: sh-pfc: r8a7791: Fix SCIF2 pinmux data
pinctrl: meson: meson8b: fix the NAND DQS pins
pinctrl: sunxi: Fix SPDIF function name for A83T
pinctrl: mxs: atomically switch mux and drive strength config
pinctrl: sh-pfc: Update info pointer after SoC-specific init
USB: serial: option: add two Longcheer device ids
USB: serial: qcserial: new Sierra Wireless EM7305 device ID
gfs2: Fix glock rhashtable rcu bug
x86/tools: Fix gcc-7 warning in relocs.c
x86/uaccess: Optimize copy_user_enhanced_fast_string() for short strings
ath10k: override CE5 config for QCA9377
KEYS: Fix an error code in request_master_key()
RDMA/uverbs: Check port number supplied by user verbs cmds
mqueue: fix a use-after-free in sys_mq_notify()
tools include: Add a __fallthrough statement
tools string: Use __fallthrough in perf_atoll()
tools strfilter: Use __fallthrough
perf top: Use __fallthrough
perf intel-pt: Use __fallthrough
perf thread_map: Correctly size buffer used with dirent->dt_name
perf scripting perl: Fix compile error with some perl5 versions
perf tests: Avoid possible truncation with dirent->d_name + snprintf
perf bench numa: Avoid possible truncation when using snprintf()
perf tools: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf script: Use readdir() instead of deprecated readdir_r()
perf tools: Remove duplicate const qualifier
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf pmu: Fix misleadingly indented assignment (whitespace)
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf trace: Do not process PERF_RECORD_LOST twice
perf tests: Remove wrong semicolon in while loop in CQM test
perf tools: Use readdir() instead of deprecated readdir_r() again
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
md: fix super_offset endianness in super_1_rdev_size_change
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
staging: comedi: fix clean-up of comedi_class in comedi_init()
ext4: check return value of kstrtoull correctly in reserved_clusters_store
x86/mm/pat: Don't report PAT on CPUs that don't support it
saa7134: fix warm Medion 7134 EEPROM read
Linux 4.4.77
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Sat, 15 Jul 2017 09:58:03 +0000 (11:58 +0200)]
Linux 4.4.77
Maciej S. Szmigiero [Sat, 2 Jul 2016 23:27:46 +0000 (20:27 -0300)]
saa7134: fix warm Medion 7134 EEPROM read
commit
5a91206ff0d0548939f3e85a65fb76b400fb0e89 upstream.
When saa7134 module driving a Medion 7134 card is reloaded reads of this
card EEPROM (required for automatic detection of tuner model) will be
corrupted due to I2C gate in DVB-T demod being left closed.
This sometimes also happens on first saa7134 module load after a warm
reboot.
Fix this by opening this I2C gate before doing EEPROM read during i2c
initialization.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Tue, 4 Jul 2017 23:04:23 +0000 (19:04 -0400)]
x86/mm/pat: Don't report PAT on CPUs that don't support it
commit
99c13b8c8896d7bcb92753bf0c63a8de4326e78d upstream.
The pat_enabled() logic is broken on CPUs which do not support PAT and
where the initialization code fails to call pat_init(). Due to that the
enabled flag stays true and pat_enabled() returns true wrongfully.
As a consequence the mappings, e.g. for Xorg, are set up with the wrong
caching mode and the required MTRR setups are omitted.
To cure this the following changes are required:
1) Make pat_enabled() return true only if PAT initialization was
invoked and successful.
2) Invoke init_cache_modes() unconditionally in setup_arch() and
remove the extra callsites in pat_disable() and the pat disabled
code path in pat_init().
Also rename __pat_enabled to pat_disabled to reflect the real purpose of
this variable.
Fixes:
9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bernhard Held <berny156@gmx.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: "Luis R. Rodriguez" <mcgrof@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Fri, 23 Jun 2017 05:08:22 +0000 (01:08 -0400)]
ext4: check return value of kstrtoull correctly in reserved_clusters_store
commit
1ea1516fbbab2b30bf98c534ecaacba579a35208 upstream.
kstrtoull returns 0 on success, however, in reserved_clusters_store we
will return -EINVAL if kstrtoull returns 0, it makes us fail to update
reserved_clusters value through sysfs.
Fixes:
76d33bca5581b1dd5c3157fa168db849a784ada4
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 16 Jun 2017 18:35:34 +0000 (19:35 +0100)]
staging: comedi: fix clean-up of comedi_class in comedi_init()
commit
a9332e9ad09c2644c99058fcf6ae2f355e93ce74 upstream.
There is a clean-up bug in the core comedi module initialization
functions, `comedi_init()`. If the `comedi_num_legacy_minors` module
parameter is non-zero (and valid), it creates that many "legacy" devices
and registers them in SysFS. A failure causes the function to clean up
and return an error. Unfortunately, it fails to destroy the "comedi"
class that was created earlier. Fix it by adding a call to
`class_destroy(comedi_class)` at the appropriate place in the clean-up
sequence.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sat, 29 Apr 2017 12:03:44 +0000 (13:03 +0100)]
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
commit
dc32190f2cd41c7dba25363ea7d618d4f5172b4e upstream.
The key table is not intialized correctly without this call.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neal Cardwell [Mon, 25 Jan 2016 22:01:53 +0000 (14:01 -0800)]
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
commit
d88270eef4b56bd7973841dd1fed387ccfa83709 upstream.
This commit fixes a corner case in tcp_mark_head_lost() which was
causing the WARN_ON(len > skb->len) in tcp_fragment() to fire.
tcp_mark_head_lost() was assuming that if a packet has
tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of
M*mss bytes, for any M < N. But with the tricky way TCP pcounts are
maintained, this is not always true.
For example, suppose the sender sends 4 1-byte packets and have the
last 3 packet sacked. It will merge the last 3 packets in the write
queue into an skb with pcount = 3 and len = 3 bytes. If another
recovery happens after a sack reneging event, tcp_mark_head_lost()
may attempt to split the skb assuming it has more than 2*MSS bytes.
This sounds very counterintuitive, but as the commit description for
the related commit
c0638c247f55 ("tcp: don't fragment SACKed skbs in
tcp_mark_head_lost()") notes, this is because tcp_shifted_skb()
coalesces adjacent regions of SACKed skbs, and when doing this it
preserves the sum of their packet counts in order to reflect the
real-world dynamics on the wire. The
c0638c247f55 commit tried to
avoid problems by not fragmenting SACKed skbs, since SACKed skbs are
where the non-proportionality between pcount and skb->len/mss is known
to be possible. However, that commit did not handle the case where
during a reneging event one of these weird SACKed skbs becomes an
un-SACKed skb, which tcp_mark_head_lost() can then try to fragment.
The fix is to simply mark the entire skb lost when this happens.
This makes the recovery slightly more aggressive in such corner
cases before we detect reordering. But once we detect reordering
this code path is by-passed because FACK is disabled.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Fri, 10 Mar 2017 03:27:23 +0000 (11:27 +0800)]
md: fix super_offset endianness in super_1_rdev_size_change
commit
3fb632e40d7667d8bedfabc28850ac06d5493f54 upstream.
The sb->super_offset should be big-endian, but the rdev->sb_start is in
host byte order, so fix this by adding cpu_to_le64.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Fri, 10 Mar 2017 03:49:12 +0000 (11:49 +0800)]
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
commit
1345921393ba23b60d3fcf15933e699232ad25ae upstream.
The sb->layout is of type __le32, so we shoud use le32_to_cpu.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:53:02 +0000 (11:53 -0300)]
perf tools: Use readdir() instead of deprecated readdir_r() again
commit
22a9f41b555673e7499b97acf3ffb07bf0af31ad upstream.
The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case when parsing tracepoint event definitions, to
avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it
instead of readdir_r().
See: http://man7.org/linux/man-pages/man3/readdir.3.html
"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe. In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."
Noticed while building on a Fedora Rawhide docker container.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wddn49r6bz6wq4ee3dxbl7lo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Trippelsdorf [Mon, 14 Dec 2015 15:43:35 +0000 (16:43 +0100)]
perf tests: Remove wrong semicolon in while loop in CQM test
commit
cf89813a5b514bff9b3b5e7eaf2090f22fba62e0 upstream.
The while loop was spinning. Fix by removing a semicolon.
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
035827e9f2bd ("perf tests: Add Intel CQM test")
Link: http://lkml.kernel.org/r/20151214154335.GA1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 30 Mar 2016 19:51:17 +0000 (16:51 -0300)]
perf trace: Do not process PERF_RECORD_LOST twice
commit
3ed5ca2efff70e9f589087c2013789572901112d upstream.
We catch this record to provide a visual indication that events are
getting lost, then call the default method to allow extra logging shared
with the other tools to take place.
This extra logging was done twice because we were continuing to the
"default" clause where machine__process_event() will end up calling
machine__process_lost_event() again, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wus2zlhw3qo24ye84ewu4aqw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 15:04:29 +0000 (12:04 -0300)]
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
commit
62aa0e177d278462145a29c30d3c8501ae57e200 upstream.
To fix the build on Fedora Rawhide (gcc 6.0.0
20160311 (Red Hat 6.0.0-0.17):
CC /tmp/build/perf/arch/x86/util/dwarf-regs.o
arch/x86/util/dwarf-regs.c:66:36: error: 'x86_32_regoffset_table' defined but not used [-Werror=unused-const-variable=]
static const struct pt_regs_offset x86_32_regoffset_table[] = {
^~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fghuksc1u8ln82bof4lwcj0o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Trippelsdorf [Mon, 14 Dec 2015 15:44:40 +0000 (16:44 +0100)]
perf pmu: Fix misleadingly indented assignment (whitespace)
commit
d85ce830eef6c10d1e9617172dea4681f02b8424 upstream.
One line in perf_pmu__parse_unit() is indented wrongly, leading to a
warning (=> error) from gcc 6:
util/pmu.c:156:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
sret = read(fd, alias->unit, UNIT_MAX_LEN);
^~~~
util/pmu.c:153:2: note: ...this 'if' clause, but it is not
if (fd == -1)
^~
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
410136f5dd96 ("tools/perf/stat: Add event unit and scale support")
Link: http://lkml.kernel.org/r/20151214154440.GC1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Trippelsdorf [Mon, 14 Dec 2015 15:44:03 +0000 (16:44 +0100)]
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
commit
d4913cbd05bab685e49c8174896e563b2487d054 upstream.
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
c97cf42219b7 ("perf top: Live TUI Annotation")
Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Engestrom [Mon, 25 Apr 2016 09:47:54 +0000 (10:47 +0100)]
perf tools: Remove duplicate const qualifier
commit
3b556bced46aa6b1873da7faa18eff235e896adc upstream.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461577678-29517-1-git-send-email-eric.engestrom@imgtec.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:25:59 +0000 (11:25 -0300)]
perf script: Use readdir() instead of deprecated readdir_r()
commit
a5e8e825bd1704c488bf6a46936aaf3b9f203d6a upstream.
The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case in 'perf script', so, to avoid breaking the build
with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r().
See: http://man7.org/linux/man-pages/man3/readdir.3.html
"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe. In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."
Noticed while building on a Fedora Rawhide docker container.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mt3xz7n2hl49ni2vx7kuq74g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:31:24 +0000 (11:31 -0300)]
perf thread_map: Use readdir() instead of deprecated readdir_r()
commit
3354cf71104de49326d19d2f9bdb1f66eea52ef4 upstream.
The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case in thread_map, so, to avoid breaking the build
with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r().
See: http://man7.org/linux/man-pages/man3/readdir.3.html
"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe. In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."
Noticed while building on a Fedora Rawhide docker container.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-del8h2a0f40z75j4r42l96l0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:32:15 +0000 (11:32 -0300)]
perf tools: Use readdir() instead of deprecated readdir_r()
commit
7093b4c963cc4e344e490c774924a180602a7092 upstream.
The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case when synthesizing events for pre-existing threads
by traversing /proc, so, to avoid breaking the build with glibc-2.23.90
(upcoming 2.24), use it instead of readdir_r().
See: http://man7.org/linux/man-pages/man3/readdir.3.html
"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe. In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."
Noticed while building on a Fedora Rawhide docker container.
CC /tmp/build/perf/util/event.o
util/event.c: In function '__event__synthesize_thread':
util/event.c:466:2: error: 'readdir_r' is deprecated [-Werror=deprecated-declarations]
while (!readdir_r(tasks, &dirent, &next) && next) {
^~~~~
In file included from /usr/include/features.h:368:0,
from /usr/include/stdint.h:25,
from /usr/lib/gcc/x86_64-redhat-linux/6.0.0/include/stdint.h:9,
from /git/linux/tools/include/linux/types.h:6,
from util/event.c:1:
/usr/include/dirent.h:189:12: note: declared here
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i1vj7nyjp2p750rirxgrfd3c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Thu, 9 Feb 2017 17:39:42 +0000 (14:39 -0300)]
perf bench numa: Avoid possible truncation when using snprintf()
commit
3aff8ba0a4c9c9191bb788171a1c54778e1246a2 upstream.
Addressing this warning from gcc 7:
CC /tmp/build/perf/bench/numa.o
bench/numa.c: In function '__bench_numa':
bench/numa.c:1582:42: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 8 and 17 [-Werror=format-truncation=]
snprintf(tname, 32, "process%d:thread%d", p, t);
^~
bench/numa.c:1582:25: note: directive argument in the range [0,
2147483647]
snprintf(tname, 32, "process%d:thread%d", p, t);
^~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:939:0,
from bench/../util/util.h:47,
from bench/../builtin.h:4,
from bench/numa.c:11:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 17 and 35 bytes into a destination of size 32
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-twa37vsfqcie5gwpqwnjuuz9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Thu, 9 Feb 2017 17:48:46 +0000 (14:48 -0300)]
perf tests: Avoid possible truncation with dirent->d_name + snprintf
commit
2e2bbc039fad9eabad6c4c1a473c8b2554cdd2d4 upstream.
Addressing a few cases spotted by a new warning in gcc 7:
tests/parse-events.c: In function 'test_pmu_events':
tests/parse-events.c:1790:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 90 [-Werror=format-truncation=]
snprintf(name, MAX_NAME, "cpu/event=%s/u", ent->d_name);
^~
In file included from /usr/include/stdio.h:939:0,
from /git/linux/tools/perf/util/map.h:9,
from /git/linux/tools/perf/util/symbol.h:7,
from /git/linux/tools/perf/util/evsel.h:10,
from tests/parse-events.c:3:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 13 and 268 bytes into a destination of size 100
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tests/parse-events.c:1798:29: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 100 [-Werror=format-truncation=]
snprintf(name, MAX_NAME, "%s:u,cpu/event=%s/u", ent->d_name, ent->d_name);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
945aea220bb8 ("perf tests: Move test objects into 'tests' directory")
Link: http://lkml.kernel.org/n/tip-ty4q2p8zp1dp3mskvubxskm5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang YanQing [Sun, 12 Feb 2017 02:46:55 +0000 (10:46 +0800)]
perf scripting perl: Fix compile error with some perl5 versions
commit
d7dd112ea5cacf91ae72c0714c3b911eb6016fea upstream.
Fix below compile error:
CC util/scripting-engines/trace-event-perl.o
In file included from /usr/lib/perl5/5.22.2/i686-linux/CORE/perl.h:5673:0,
from util/scripting-engines/trace-event-perl.c:31:
/usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h: In function 'S__is_utf8_char_slow':
/usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h:270:5: error: nested extern declaration of 'Perl___notused' [-Werror=nested-externs]
dTHX; /* The function called below requires thread context */
^
cc1: all warnings being treated as errors
After digging perl5 repository, I find out that we will meet this
compile error with perl from v5.21.1 to v5.25.4
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170212024655.GA15997@udknight
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 8 Feb 2017 20:01:46 +0000 (17:01 -0300)]
perf thread_map: Correctly size buffer used with dirent->dt_name
commit
bdf23a9a190d7ecea092fd5c4aabb7d4bd0a9980 upstream.
The size of dirent->dt_name is NAME_MAX + 1, but the size for the 'path'
buffer is hard coded at 256, which may truncate it because we also
prepend "/proc/", so that all that into account and thank gcc 7 for this
warning:
/git/linux/tools/perf/util/thread_map.c: In function 'thread_map__new_by_uid':
/git/linux/tools/perf/util/thread_map.c:119:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 250 [-Werror=format-truncation=]
snprintf(path, sizeof(path), "/proc/%s", dirent->d_name);
^~
In file included from /usr/include/stdio.h:939:0,
from /git/linux/tools/perf/util/thread_map.c:5:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 7 and 262 bytes into a destination of size 256
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-csy0r8zrvz5efccgd4k12c82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Thu, 9 Feb 2017 18:22:22 +0000 (15:22 -0300)]
perf intel-pt: Use __fallthrough
commit
7ea6856d6f5629d742edc23b8b76e6263371ef45 upstream.
To address new warnings emmited by gcc 7, e.g.::
CC /tmp/build/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.o
CC /tmp/build/perf/tests/parse-events.o
util/intel-pt-decoder/intel-pt-pkt-decoder.c: In function 'intel_pt_pkt_desc':
util/intel-pt-decoder/intel-pt-pkt-decoder.c:499:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (!(packet->count))
^
util/intel-pt-decoder/intel-pt-pkt-decoder.c:501:2: note: here
case INTEL_PT_CYC:
^~~~
CC /tmp/build/perf/util/intel-pt-decoder/intel-pt-decoder.o
cc1: all warnings being treated as errors
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mf0hw789pu9x855us5l32c83@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 8 Feb 2017 20:01:46 +0000 (17:01 -0300)]
perf top: Use __fallthrough
commit
7b0214b702ad8e124e039a317beeebb3f020d125 upstream.
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:
CC /tmp/build/perf/builtin-top.o
builtin-top.c: In function 'display_thread':
builtin-top.c:644:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (errno == EINTR)
^
builtin-top.c:647:3: note: here
default:
^~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lmcfnnyx9ic0m6j0aud98p4e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 8 Feb 2017 20:01:46 +0000 (17:01 -0300)]
tools strfilter: Use __fallthrough
commit
d64b721d27aef3fbeb16ecda9dd22ee34818ff70 upstream.
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:
util/strfilter.c: In function 'strfilter_node__sprint':
util/strfilter.c:270:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (len < 0)
^
util/strfilter.c:272:2: note: here
case '!':
^~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-z2dpywg7u8fim000hjfbpyfm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 8 Feb 2017 20:01:46 +0000 (17:01 -0300)]
tools string: Use __fallthrough in perf_atoll()
commit
94bdd5edb34e472980d1e18b4600d6fb92bd6b0a upstream.
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:
CC /tmp/build/perf/util/string.o
util/string.c: In function 'perf_atoll':
util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (*p)
^
util/string.c:24:3: note: here
case '\0':
^~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ophb30v9apkk6o95el0rqlq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 8 Feb 2017 20:01:46 +0000 (17:01 -0300)]
tools include: Add a __fallthrough statement
commit
b5bf1733d6a391c4e90ea8f8468d83023be74a2a upstream.
For cases where implicit fall through case labels are intended,
to let us inform that to gcc >= 7:
CC /tmp/build/perf/util/string.o
util/string.c: In function 'perf_atoll':
util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (*p)
^
util/string.c:24:3: note: here
case '\0':
^~~~
So we introduce:
#define __fallthrough __attribute__ ((fallthrough))
And use it in such cases.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/n/tip-qnpig0xfop4hwv6k4mv1wts5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Sun, 9 Jul 2017 20:19:55 +0000 (13:19 -0700)]
mqueue: fix a use-after-free in sys_mq_notify()
commit
f991af3daabaecff34684fd51fac80319d1baad1 upstream.
The retry logic for netlink_attachskb() inside sys_mq_notify()
is nasty and vulnerable:
1) The sock refcnt is already released when retry is needed
2) The fd is controllable by user-space because we already
release the file refcnt
so we when retry but the fd has been just closed by user-space
during this small window, we end up calling netlink_detachskb()
on the error path which releases the sock again, later when
the user-space closes this socket a use-after-free could be
triggered.
Setting 'sock' to NULL here should be sufficient to fix it.
Reported-by: GeneBlue <geneblue.mail@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Pismenny [Tue, 27 Jun 2017 12:09:13 +0000 (15:09 +0300)]
RDMA/uverbs: Check port number supplied by user verbs cmds
commit
5ecce4c9b17bed4dc9cb58bfb10447307569b77b upstream.
The ib_uverbs_create_ah() ind ib_uverbs_modify_qp() calls receive
the port number from user input as part of its attributes and assumes
it is valid. Down on the stack, that parameter is used to access kernel
data structures. If the value is invalid, the kernel accesses memory
it should not. To prevent this, verify the port number before using it.
BUG: KASAN: use-after-free in ib_uverbs_create_ah+0x6d5/0x7b0
Read of size 4 at addr
ffff880018d67ab8 by task syz-executor/313
BUG: KASAN: slab-out-of-bounds in modify_qp.isra.4+0x19d0/0x1ef0
Read of size 4 at addr
ffff88006c40ec58 by task syz-executor/819
Fixes:
67cdb40ca444 ("[IB] uverbs: Implement more commands")
Cc: Yevgeny Kliteynik <kliteyn@mellanox.com>
Cc: Tziporet Koren <tziporet@mellanox.com>
Cc: Alex Polak <alexpo@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 9 Feb 2017 17:17:52 +0000 (17:17 +0000)]
KEYS: Fix an error code in request_master_key()
commit
57cb17e764ba0aaa169d07796acce54ccfbc6cae upstream.
This function has two callers and neither are able to handle a NULL
return. Really, -EINVAL is the correct thing return here anyway. This
fixes some static checker warnings like:
security/keys/encrypted-keys/encrypted.c:709 encrypted_key_decrypt()
error: uninitialized symbol 'master_key'.
Fixes:
7e70cb497850 ("keys: add new key-type encrypted")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bartosz Markowski [Thu, 15 Dec 2016 09:23:22 +0000 (11:23 +0200)]
ath10k: override CE5 config for QCA9377
commit
b08b5b53a1ed2bd7a883f8fd29232c8f03604671 upstream.
Similarly to QCA6174, QCA9377 requires the CE5 configuration to be
available for other feature. Use the ath10k_pci_override_ce_config()
for it as well.
This is required for TF2.0 firmware. Previous FW revisions were
working fine without this patch.
Fixes:
a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Thu, 29 Jun 2017 13:55:58 +0000 (15:55 +0200)]
x86/uaccess: Optimize copy_user_enhanced_fast_string() for short strings
commit
236222d39347e0e486010f10c1493e83dbbdfba8 upstream.
According to the Intel datasheet, the REP MOVSB instruction
exposes a pretty heavy setup cost (50 ticks), which hurts
short string copy operations.
This change tries to avoid this cost by calling the explicit
loop available in the unrolled code for strings shorter
than 64 bytes.
The 64 bytes cutoff value is arbitrary from the code logic
point of view - it has been selected based on measurements,
as the largest value that still ensures a measurable gain.
Micro benchmarks of the __copy_from_user() function with
lengths in the [0-63] range show this performance gain
(shorter the string, larger the gain):
- in the [55%-4%] range on Intel Xeon(R) CPU E5-2690 v4
- in the [72%-9%] range on Intel Core i7-4810MQ
Other tested CPUs - namely Intel Atom S1260 and AMD Opteron
8216 - show no difference, because they do not expose the
ERMS feature bit.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4533a1d101fd460f80e21329a34928fad521c1d4.1498744345.git.pabeni@redhat.com
[ Clarified the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Markus Trippelsdorf [Thu, 15 Dec 2016 12:45:13 +0000 (13:45 +0100)]
x86/tools: Fix gcc-7 warning in relocs.c
commit
7ebb916782949621ff6819acf373a06902df7679 upstream.
gcc-7 warns:
In file included from arch/x86/tools/relocs_64.c:17:0:
arch/x86/tools/relocs.c: In function ‘process_64’:
arch/x86/tools/relocs.c:953:2: warning: argument 1 null where non-null expected [-Wnonnull]
qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/tools/relocs.h:6:0,
from arch/x86/tools/relocs_64.c:1:
/usr/include/stdlib.h:741:13: note: in a call to function ‘qsort’ declared here
extern void qsort
This happens because relocs16 is not used for ELF_BITS == 64,
so there is no point in trying to sort it.
Make the sort_relocs(&relocs16) call 32bit only.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/20161215124513.GA289@x4
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Fri, 7 Jul 2017 18:22:05 +0000 (13:22 -0500)]
gfs2: Fix glock rhashtable rcu bug
commit
961ae1d83d055a4b9ebbfb4cc8ca62ec1a7a3b74 upstream.
Before commit
88ffbf3e03 "GFS2: Use resizable hash table for glocks",
glocks were freed via call_rcu to allow reading the glock hashtable
locklessly using rcu. This was then changed to free glocks immediately,
which made reading the glock hashtable unsafe. Bring back the original
code for freeing glocks via call_rcu.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjørn Mork [Tue, 13 Jun 2017 17:11:42 +0000 (19:11 +0200)]
USB: serial: qcserial: new Sierra Wireless EM7305 device ID
commit
996fab55d864ed604158f71724ff52db1c2454a3 upstream.
A new Sierra Wireless EM7305 device ID used in a Toshiba laptop.
Reported-by: Petr Kloc <petr_kloc@yahoo.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 12 Jun 2017 14:30:16 +0000 (16:30 +0200)]
USB: serial: option: add two Longcheer device ids
commit
8fb060da715ad10fe956d7c0077b2fb0c12bb9d7 upstream.
Add two Longcheer device-id entries which specifically enables a
Telewell TW-3G HSPA+ branded modem (0x9801).
Reported-by: Teemu Likonen <tlikonen@iki.fi>
Reported-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Lars Melin <larsm17@gmail.com>
Tested-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Thu, 9 Mar 2017 18:20:48 +0000 (19:20 +0100)]
pinctrl: sh-pfc: Update info pointer after SoC-specific init
commit
3091ae775fae17084013021d01513bc1ad274e6a upstream.
Update the sh_pfc_soc_info pointer after calling the SoC-specific
initialization function, as it may have been updated to e.g. handle
different SoC revisions. This makes sure the correct subdriver name is
printed later.
Fixes:
0c151062f32c9db8 ("sh-pfc: Add support for SoC-specific initialization")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Thu, 18 May 2017 09:23:55 +0000 (11:23 +0200)]
pinctrl: mxs: atomically switch mux and drive strength config
commit
da6c2addf66d7ff7d0b090d6267d4292f951e4e6 upstream.
To set the mux mode of a pin two bits must be set. Up to now this is
implemented using the following idiom:
writel(mask, reg + CLR);
writel(value, reg + SET);
. This however results in the mux mode being 0 between the two writes.
On my machine there is an IC's reset pin connected to LCD_D20. The
bootloader configures this pin as GPIO output-high (i.e. not holding the
IC in reset). When Linux reconfigures the pin to GPIO the short time
LCD_D20 is muxed as LCD_D20 instead of GPIO_1_20 is enough to confuse
the connected IC.
The same problem is present for the pin's drive strength setting which is
reset to low drive strength before using the right value.
So instead of relying on the hardware to modify the register setting
using two writes implement the bit toggling using read-modify-write.
Fixes:
17723111e64f ("pinctrl: add pinctrl-mxs support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Mon, 22 May 2017 06:25:49 +0000 (14:25 +0800)]
pinctrl: sunxi: Fix SPDIF function name for A83T
commit
7903d4f5e1dec53963cba9b1bc472a76a3532e07 upstream.
We use well known standard names for functions that have name, such as
I2C, SPI, SPDIF, etc..
Fix the function name of SPDIF, which was named OWA (One Wire Audio)
based on Allwinner datasheets.
Fixes:
4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller
support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Sat, 1 Apr 2017 13:59:21 +0000 (15:59 +0200)]
pinctrl: meson: meson8b: fix the NAND DQS pins
commit
97ba26b8a9343008504d4e3a87d212bc07b05212 upstream.
The nand_groups table uses different names for the NAND DQS pins than
the GROUP() definition in meson8b_cbus_groups (nand_dqs_0 vs nand_dqs0).
This prevents using the NAND DQS pins in the devicetree.
Fix this by ensuring that the GROUP() definition and the
meson8b_cbus_groups use the same name for these pins.
Fixes:
0fefcb6876d0 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergei Shtylyov [Thu, 30 Mar 2017 20:20:48 +0000 (23:20 +0300)]
pinctrl: sh-pfc: r8a7791: Fix SCIF2 pinmux data
commit
58439280f84e6b39fd7d61f25ab30489c1aaf0a9 upstream.
PINMUX_IPSR_MSEL() macro invocation for the TX2 signal has apparently wrong
1st argument -- most probably a result of cut&paste programming...
Fixes:
508845196238 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liping Zhang [Fri, 7 Apr 2017 15:51:07 +0000 (23:51 +0800)]
sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec
commit
425fffd886bae3d127a08fa6a17f2e31e24ed7ff upstream.
Currently, inputting the following command will succeed but actually the
value will be truncated:
# echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat
This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.
Fixes:
e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liping Zhang [Fri, 7 Apr 2017 15:51:06 +0000 (23:51 +0800)]
sysctl: don't print negative flag for proc_douintvec
commit
5380e5644afbba9e3d229c36771134976f05c91e upstream.
I saw some very confusing sysctl output on my system:
# cat /proc/sys/net/core/xfrm_aevent_rseqth
-2
# cat /proc/sys/net/core/xfrm_aevent_etime
-10
# cat /proc/sys/net/ipv4/tcp_notsent_lowat
-
4294967295
Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.
Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.
Fixes:
e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Sat, 25 Feb 2017 10:27:37 +0000 (10:27 +0000)]
mac80211_hwsim: Replace bogus hrtimer clockid
commit
8fbcfeb8a9cc803464d6c166e7991913711c612c upstream.
mac80211_hwsim initializes a hrtimer with clockid
CLOCK_MONOTONIC_RAW. That's not supported.
Use CLOCK_MONOTONIC instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Herrenschmidt [Tue, 13 Jun 2017 06:01:13 +0000 (16:01 +1000)]
usb: Fix typo in the definition of Endpoint[out]Request
commit
7cf916bd639bd26db7214f2205bccdb4b9306256 upstream.
The current definition is wrong. This breaks my upcoming
Aspeed virtual hub driver.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Grzeschik [Mon, 22 May 2017 11:02:44 +0000 (13:02 +0200)]
usb: usbip: set buffer pointers to NULL after free
commit
b3b51417d0af63fb9a06662dc292200aed9ea53f upstream.
The usbip stack dynamically allocates the transfer_buffer and
setup_packet of each urb that got generated by the tcp to usb stub code.
As these pointers are always used only once we will set them to NULL
after use. This is done likewise to the free_urb code in vudc_dev.c.
This patch fixes double kfree situations where the usbip remote side
added the URB_FREE_BUFFER.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devin Heitmueller [Tue, 27 Jun 2017 17:08:51 +0000 (13:08 -0400)]
Add USB quirk for HVR-950q to avoid intermittent device resets
commit
6836796de4019944f4ba4c99a360e8250fd2e735 upstream.
The USB core and sysfs will attempt to enumerate certain parameters
which are unsupported by the au0828 - causing inconsistent behavior
and sometimes causing the chip to reset. Avoid making these calls.
This problem manifested as intermittent cases where the au8522 would
be reset on analog video startup, in particular when starting up ALSA
audio streaming in parallel - the sysfs entries created by
snd-usb-audio on streaming startup would result in unsupported control
messages being sent during tuning which would put the chip into an
unknown state.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremie Rapin [Wed, 28 Jun 2017 16:23:25 +0000 (18:23 +0200)]
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
commit
fd90f73a9925f248d696bde1cfc836d9fda5570d upstream.
Added the USB serial device ID for the CEL ZigBee EM3588
radio stick.
Signed-off-by: Jeremie Rapin <rapinj@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Wed, 17 May 2017 12:57:45 +0000 (15:57 +0300)]
usb: dwc3: replace %p with %pK
commit
04fb365c453e14ff9e8a28f1c46050d920a27a4a upstream.
%p will leak kernel pointers, so let's not expose the information on
dmesg and instead use %pK. %pK will only show the actual addresses if
explicitly enabled under /proc/sys/kernel/kptr_restrict.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gerd Hoffmann [Thu, 6 Apr 2017 15:59:40 +0000 (17:59 +0200)]
drm/virtio: don't leak bo on drm_gem_object_init failure
commit
385aee965b4e4c36551c362a334378d2985b722a upstream.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabrina Dubroca [Thu, 22 Jun 2017 09:24:42 +0000 (11:24 +0200)]
tracing/kprobes: Allow to create probe with a module name starting with a digit
commit
9e52b32567126fe146f198971364f68d3bc5233f upstream.
Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.
This allows creating a probe such as:
p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0
Which is necessary for this command to work:
perf probe -m 8021q -a vlan_gro_receive
Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net
Fixes:
413d37d1e ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlastimil Babka [Tue, 4 Jul 2017 08:45:43 +0000 (10:45 +0200)]
mm: fix classzone_idx underflow in shrink_zones()
[Not upstream as that would take 34+ patches]
We've got reported a BUG in do_try_to_free_pages():
BUG: unable to handle kernel paging request at
ffff8ffffff28990
IP: [<
ffffffff8119abe0>] do_try_to_free_pages+0x140/0x490
PGD 0
Oops: 0000 [#1] SMP
megaraid_sas sg scsi_mod efivarfs autofs4
Supported: No, Unsupported modules are loaded
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
task:
ffff88ffd0d4c540 ti:
ffff88ffd0e48000 task.ti:
ffff88ffd0e48000
RIP: 0010:[<
ffffffff8119abe0>] [<
ffffffff8119abe0>] do_try_to_free_pages+0x140/0x490
RSP: 0018:
ffff88ffd0e4ba60 EFLAGS:
00010206
RAX:
000006fffffff900 RBX:
00000000ffffffff RCX:
ffff88fffff29000
RDX:
000000ffffffff00 RSI:
0000000000000003 RDI:
00000000024200c8
RBP:
0000000001320122 R08:
0000000000000000 R09:
ffff88ffd0e4bbac
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88ffd0e4bae0
R13:
0000000000000e00 R14:
ffff88fffff2a500 R15:
ffff88fffff2b300
FS:
0000000000000000(0000) GS:
ffff88ffe6440000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff8ffffff28990 CR3:
0000000001c0a000 CR4:
00000000003406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Stack:
00000002db570a80 024200c80000001e ffff88fffff2b300 0000000000000000
ffff88fffffd5700 ffff88ffd0d4c540 ffff88ffd0d4c540 ffffffff0000000c
0000000000000000 0000000000000040 00000000024200c8 ffff88ffd0e4bae0
Call Trace:
[<
ffffffff8119afea>] try_to_free_pages+0xba/0x170
[<
ffffffff8118cf2f>] __alloc_pages_nodemask+0x53f/0xb20
[<
ffffffff811d39ff>] alloc_pages_current+0x7f/0x100
[<
ffffffff811e2232>] migrate_pages+0x202/0x710
[<
ffffffff815dadaa>] __offline_pages.constprop.23+0x4ba/0x790
[<
ffffffff81463263>] memory_subsys_offline+0x43/0x70
[<
ffffffff8144cbed>] device_offline+0x7d/0xa0
[<
ffffffff81392fa2>] acpi_bus_offline+0xa5/0xef
[<
ffffffff81394a77>] acpi_device_hotplug+0x21b/0x41f
[<
ffffffff8138dab7>] acpi_hotplug_work_fn+0x1a/0x23
[<
ffffffff81093cee>] process_one_work+0x14e/0x410
[<
ffffffff81094546>] worker_thread+0x116/0x490
[<
ffffffff810999ed>] kthread+0xbd/0xe0
[<
ffffffff815e4e7f>] ret_from_fork+0x3f/0x70
This translates to the loop in shrink_zone():
classzone_idx = requested_highidx;
while (!populated_zone(zone->zone_pgdat->node_zones +
classzone_idx))
classzone_idx--;
where no zone is populated, so classzone_idx becomes -1 (in RBX).
Added debugging output reveals that we enter the function with
sc->gfp_mask == GFP_NOFS|__GFP_NOFAIL|__GFP_HARDWALL|__GFP_MOVABLE
requested_highidx = gfp_zone(sc->gfp_mask) == 2 (ZONE_NORMAL)
Inside the for loop, however:
gfp_zone(sc->gfp_mask) == 3 (ZONE_MOVABLE)
This means we have gone through this branch:
if (buffer_heads_over_limit)
sc->gfp_mask |= __GFP_HIGHMEM;
This changes the gfp_zone() result, but requested_highidx remains unchanged.
On nodes where the only populated zone is movable, the inner while loop will
check only lower zones, which are not populated, and underflow classzone_idx.
To sum up, the bug occurs in configurations with ZONE_MOVABLE (such as when
booted with the movable_node parameter) and only in situations when
buffer_heads_over_limit is true, and there's an allocation with __GFP_MOVABLE
and without __GFP_HIGHMEM performing direct reclaim.
This patch makes sure that classzone_idx starts with the correct zone.
Mainline has been affected in versions 4.6 and 4.7, but the culprit commit has
been also included in stable trees.
In mainline, this has been fixed accidentally as part of 34-patch series (plus
follow-up fixes) "Move LRU page reclaim from zones to nodes", which makes the
mainline commit unsuitable for stable backport, unfortunately.
Fixes:
7bf52fb891b6 ("mm: vmscan: reclaim highmem zone if buffer_heads is over limit")
Obsoleted-by: b2e18757f2c9 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Debugged-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafał Miłecki [Tue, 12 Apr 2016 11:30:45 +0000 (13:30 +0200)]
bgmac: reset & enable Ethernet core before using it
commit
b4dfd8e92956b396d3438212bc9a0be6267b8b34 upstream.
This fixes Ethernet on D-Link DIR-885L with BCM47094 SoC. Felix reported
similar fix was needed for his BCM4709 device (Buffalo WXR-1900DHP?).
I tested this for regressions on BCM4706, BCM4708A0 and BCM47081A0.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Salido [Tue, 25 Apr 2017 23:55:26 +0000 (16:55 -0700)]
driver core: platform: fix race condition with driver_override
commit
6265539776a0810b7ce6398c27866ddb9c6bd154 upstream.
The driver_override implementation is susceptible to race condition when
different threads are reading vs storing a different driver override.
Add locking to avoid race condition.
Fixes:
3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Salido <salidoa@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Thu, 27 Apr 2017 07:42:25 +0000 (09:42 +0200)]
fs: completely ignore unknown open flags
commit
629e014bb8349fcf7c1e4df19a842652ece1c945 upstream.
Currently we just stash anything we got into file->f_flags, and the
report it in fcntl(F_GETFD). This patch just clears out all unknown
flags so that we don't pass them to the fs or report them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Thu, 27 Apr 2017 07:42:24 +0000 (09:42 +0200)]
fs: add a VALID_OPEN_FLAGS
commit
80f18379a7c350c011d30332658aa15fe49a8fa5 upstream.
Add a central define for all valid open flags, and use it in the uniqueness
check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martijn Coenen [Fri, 23 Jun 2017 17:13:43 +0000 (10:13 -0700)]
ANDROID: binder: add RT inheritance flag to node.
Allows a binder node to specify whether it wants to
inherit real-time scheduling policy from a caller.
Change-Id: I375b6094bf441c19f19cba06d5a6be02cd07d714
Signed-off-by: Martijn Coenen <maco@android.com>
Martijn Coenen [Wed, 7 Jun 2017 17:02:12 +0000 (10:02 -0700)]
ANDROID: binder: improve priority inheritance.
By raising the priority of a thread selected for
a transaction *before* we wake it up.
Delay restoring the priority when doing a reply
until after we wake-up the process receiving
the reply.
Change-Id: Ic332e4e0ed7d2d3ca6ab1034da4629c9eadd3405
Signed-off-by: Martijn Coenen <maco@google.com>
Martijn Coenen [Wed, 7 Jun 2017 16:29:14 +0000 (09:29 -0700)]
ANDROID: binder: add min sched_policy to node.
This change adds flags to flat_binder_object.flags
to allow indicating a minimum scheduling policy for
the node. It also clarifies the valid value range
for the priority bits in the flags.
Internally, we use the priority map that the kernel
uses, e.g. [0..99] for real-time policies and [100..139]
for the SCHED_NORMAL/SCHED_BATCH policies.
Bug:
34461621
Bug:
37293077
Change-Id: I12438deecb53df432da18c6fc77460768ae726d2
Signed-off-by: Martijn Coenen <maco@google.com>
Martijn Coenen [Wed, 7 Jun 2017 00:04:42 +0000 (17:04 -0700)]
ANDROID: binder: add support for RT prio inheritance.
Adds support for SCHED_BATCH/SCHED_FIFO/SCHED_RR
priority inheritance.
Change-Id: I71f356e476be2933713a0ecfa2cc31aa141e2dc6
Signed-off-by: Martijn Coenen <maco@google.com>
Martijn Coenen [Tue, 6 Jun 2017 22:17:46 +0000 (15:17 -0700)]
ANDROID: binder: push new transactions to waiting threads.
Instead of pushing new transactions to the process
waitqueue, select a thread that is waiting on proc
work to handle the transaction. This will make it
easier to improve priority inheritance in future
patches, by setting the priority before we wake up
a thread.
If we can't find a waiting thread, submit the work
to the proc waitqueue instead as we did previously.
Change-Id: I23cbfcca867bed7b86007e22137d0a8fad4b4001
Signed-off-by: Martijn Coenen <maco@google.com>
Martijn Coenen [Fri, 2 Jun 2017 18:15:44 +0000 (11:15 -0700)]
ANDROID: binder: remove proc waitqueue
Removes the process waitqueue, so that threads
can only wait on the thread waitqueue. Whenever
there is process work to do, pick a thread and
wake it up.
This also fixes an issue with using epoll(),
since we no longer have to block on different
waitqueues.
Bug:
34461621
Change-Id: I2950b9de6fa078ee72d53c667a03cbaf587f0849
Signed-off-by: Martijn Coenen <maco@google.com>
Todd Kjos [Mon, 14 Nov 2016 19:37:41 +0000 (11:37 -0800)]
FROMLIST: binder: remove global binder lock
(from https://patchwork.kernel.org/patch/
9817773/)
Remove global mutex and rely on fine-grained locking
Change-Id: Idd1ae2e52d654e5dd76d443a1ff97522e687fd4c
Signed-off-by: Todd Kjos <tkjos@google.com>
Martijn Coenen [Mon, 22 May 2017 18:26:23 +0000 (11:26 -0700)]
FROMLIST: binder: fix death race conditions
(from https://patchwork.kernel.org/patch/
9817765/)
A race existed where one thread could register
a death notification for a node, while another
thread was cleaning up that node and sending
out death notifications for its references,
causing simultaneous access to ref->death
because different locks were held.
Test: boots, manual testing
Change-Id: Iff73312f34f70374f417beba4c4c82dd33cac119
Signed-off-by: Martijn Coenen <maco@google.com>
Todd Kjos [Fri, 21 Apr 2017 21:32:11 +0000 (14:32 -0700)]
FROMLIST: binder: protect against stale pointers in print_binder_transaction
(from https://patchwork.kernel.org/patch/
9817761/)
When printing transactions there were several race conditions
that could cause a stale pointer to be deferenced. Fixed by
reading the pointer once and using it if valid (which is
safe). The transaction buffer also needed protection via proc
lock, so it is only printed if we are holding the correct lock.
Bug:
36650912
Test: tested manually
Change-Id: I78240f99cc1a070d70a841c0d84d4306e2fd528d
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Thu, 20 Oct 2016 23:43:34 +0000 (16:43 -0700)]
FROMLIST: binder: protect binder_ref with outer lock
(from https://patchwork.kernel.org/patch/
9817771/)
Use proc->outer_lock to protect the binder_ref structure.
The outer lock allows functions operating on the binder_ref
to do nested acquires of node and inner locks as necessary
to attach refs to nodes atomically.
Binder refs must never be accesssed without holding the
outer lock.
Change-Id: Icf6add0eddf70473b39239960b2d9a524775b53a
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Fri, 26 May 2017 00:35:02 +0000 (17:35 -0700)]
FROMLIST: binder: use inner lock to protect thread accounting
(from https://patchwork.kernel.org/patch/
9817763/)
Use the inner lock to protect thread accounting fields in
proc structure: max_threads, requested_threads,
requested_threads_started and ready_threads.
Change-Id: I5a17eb68812702f803d4e2806e7887de0b3af18e
Signed-off-by: Todd Kjos <tkjos@google.com>
Martijn Coenen [Fri, 2 Jun 2017 20:36:52 +0000 (13:36 -0700)]
FROMLIST: binder: protect transaction_stack with inner lock.
(from https://patchwork.kernel.org/patch/
9817779/)
This makes future changes to priority inheritance
easier, since we want to be able to look at a thread's
transaction stack when selecting a thread to inherit
priority for.
It also allows us to take just a single lock in a
few paths, where we used to take two in succession.
Change-Id: Idb1b6e9faa5c669978b2b3011fe326be8aece586
Signed-off-by: Martijn Coenen <maco@google.com>
Todd Kjos [Thu, 25 May 2017 22:52:17 +0000 (15:52 -0700)]
FROMLIST: binder: protect proc->threads with inner_lock
(from https://patchwork.kernel.org/patch/
9817775/)
proc->threads will need to be accessed with higher
locks of other processes held so use proc->inner_lock
to protect it. proc->tmp_ref now needs to be protected
by proc->inner_lock.
Change-Id: I176cfeca16bf7c9b34b428c16405f93db81d2ff8
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Mon, 12 Jun 2017 19:07:26 +0000 (12:07 -0700)]
FROMLIST: binder: protect proc->nodes with inner lock
(from https://patchwork.kernel.org/patch/
9817783/)
When locks for binder_ref handling are added, proc->nodes
will need to be modified while holding the outer lock
Change-Id: I17b39e981c55130c14a62fe49900eceff6e3642b
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Thu, 8 Jun 2017 20:45:59 +0000 (13:45 -0700)]
FROMLIST: binder: add spinlock to protect binder_node
(from https://patchwork.kernel.org/patch/
9817769/)
node->node_lock is used to protect elements of node. No
need to acquire for fields that are invariant: debug_id,
ptr, cookie.
Change-Id: Ib7738e52fa7689767f17136e18cc05ff548b5717
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Thu, 20 Oct 2016 17:33:00 +0000 (10:33 -0700)]
FROMLIST: binder: add spinlocks to protect todo lists
(from https://patchwork.kernel.org/patch/
9817769/)
The todo lists in the proc, thread, and node structures
are accessed by other procs/threads to place work
items on the queue.
The todo lists are protected by the new proc->inner_lock.
No locks should ever be nested under these locks. As the
name suggests, an outer lock will be introduced in
a later patch.
Change-Id: I7720bacf5ebae4af177e22fcab0900d54c94c11a
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Tue, 21 Mar 2017 20:06:01 +0000 (13:06 -0700)]
FROMLIST: binder: use inner lock to sync work dq and node counts
(from https://patchwork.kernel.org/patch/
9817789/)
For correct behavior we need to hold the inner lock when
dequeuing and processing node work in binder_thread_read.
We now hold the inner lock when we enter the switch statement
and release it after processing anything that might be
affected by other threads.
We also need to hold the inner lock to protect the node
weak/strong ref tracking fields as long as node->proc
is non-NULL (if it is NULL then we are guaranteed that
we don't have any node work queued).
This means that other functions that manipulate these fields
must hold the inner lock. Refactored these functions to use
the inner lock.
Change-Id: I02c5cfdd3ab6dadea7f07f2a275faf3e27be77ad
Test: tested manually
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Mon, 29 May 2017 23:44:24 +0000 (16:44 -0700)]
FROMLIST: binder: introduce locking helper functions
(from https://patchwork.kernel.org/patch/
9817791/)
There are 3 main spinlocks which must be acquired in this
order:
1) proc->outer_lock : protects most fields of binder_proc,
binder_thread, and binder_ref structures. binder_proc_lock()
and binder_proc_unlock() are used to acq/rel.
2) node->lock : protects most fields of binder_node.
binder_node_lock() and binder_node_unlock() are
used to acq/rel
3) proc->inner_lock : protects the thread and node lists
(proc->threads, proc->nodes) and all todo lists associated
with the binder_proc (proc->todo, thread->todo,
proc->delivered_death and node->async_todo).
binder_inner_proc_lock() and binder_inner_proc_unlock()
are used to acq/rel
Any lock under procA must never be nested under any lock at the same
level or below on procB.
Functions that require a lock held on entry indicate which lock
in the suffix of the function name:
foo_olocked() : requires node->outer_lock
foo_nlocked() : requires node->lock
foo_ilocked() : requires proc->inner_lock
foo_iolocked(): requires proc->outer_lock and proc->inner_lock
foo_nilocked(): requires node->lock and proc->inner_lock
Change-Id: Ied42674486092a0e3bdde64356e45b2494844558
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Tue, 9 May 2017 18:08:05 +0000 (11:08 -0700)]
FROMLIST: binder: use node->tmp_refs to ensure node safety
(from https://patchwork.kernel.org/patch/
9817795/)
When obtaining a node via binder_get_node(),
binder_get_node_from_ref() or binder_new_node(),
increment node->tmp_refs to take a
temporary reference on the node to ensure the node
persists while being used. binder_put_node() must
be called to remove the temporary reference.
Change-Id: I962b39d5cd80b2d7e4786bb87236ede7914e2db7
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Mon, 8 May 2017 16:16:27 +0000 (09:16 -0700)]
FROMLIST: binder: refactor binder ref inc/dec for thread safety
(from https://patchwork.kernel.org/patch/
9817781/)
Once locks are added, binder_ref's will only be accessed
safely with the proc lock held. Refactor the inc/dec paths
to make them atomic with the binder_get_ref* paths and
node inc/dec. For example, instead of:
ref = binder_get_ref(proc, handle, strong);
...
binder_dec_ref(ref, strong);
we now have:
ret = binder_dec_ref_for_handle(proc, handle, strong, &rdata);
Since the actual ref is no longer exposed to callers, a
new struct binder_ref_data is introduced which can be used
to return a copy of ref state.
Change-Id: I7de22107f8ebc967cee63251d584fceb4ea56250
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Fri, 12 May 2017 21:42:55 +0000 (14:42 -0700)]
FROMLIST: binder: make sure accesses to proc/thread are safe
(from https://patchwork.kernel.org/patch/
9817787/)
binder_thread and binder_proc may be accessed by other
threads when processing transaction. Therefore they
must be prevented from being freed while a transaction
is in progress that references them.
This is done by introducing a temporary reference
counter for threads and procs that indicates that the
object is in use and must not be freed. binder_thread_dec_tmpref()
and binder_proc_dec_tmpref() are used to decrement
the temporary reference.
It is safe to free a binder_thread if there
is no reference and it has been released
(indicated by thread->is_dead).
It is safe to free a binder_proc if it has no
remaining threads and no reference.
A spinlock is added to the binder_transaction
to safely access and set references for t->from
and for debug code to safely access t->to_thread
and t->to_proc.
Change-Id: I0a00a0294c3e93aea8b3f141c6f18e77ad244078
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Fri, 26 May 2017 18:56:29 +0000 (11:56 -0700)]
FROMLIST: binder: make sure target_node has strong ref
(from https://patchwork.kernel.org/patch/
9817787/)
When initiating a transaction, the target_node must
have a strong ref on it. Then we take a second
strong ref to make sure the node survives until the
transaction is complete.
Change-Id: If7429cb43eda520ab89d45df6c19327cee97c60c
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Sat, 22 Apr 2017 00:35:12 +0000 (17:35 -0700)]
FROMLIST: binder: guarantee txn complete / errors delivered in-order
(from https://patchwork.kernel.org/patch/
9817805/)
Since errors are tracked in the return_error/return_error2
fields of the binder_thread object and BR_TRANSACTION_COMPLETEs
can be tracked either in those fields or via the thread todo
work list, it is possible for errors to be reported ahead
of the associated txn complete.
Use the thread todo work list for errors to guarantee
order. Also changed binder_send_failed_reply to pop
the transaction even if it failed to send a reply.
Bug:
37218618
Test: tested manually
Change-Id: I196cfaeed09fdcd697f8ab25eea4e04241fdb08f
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Fri, 31 Mar 2017 01:02:13 +0000 (18:02 -0700)]
FROMLIST: binder: refactor binder_pop_transaction
(from https://lkml.org/lkml/2017/6/29/754)
binder_pop_transaction needs to be split into 2 pieces to
to allow the proc lock to be held on entry to dequeue the
transaction stack, but no lock when kfree'ing the transaction.
Split into binder_pop_transaction_locked and binder_free_transaction
(the actual locks are still to be added).
Change-Id: I848ae994cc27b3cd083cff2dbd1071762784f4a3
Test: tested manually
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Wed, 24 May 2017 20:33:28 +0000 (13:33 -0700)]
FROMLIST: binder: use atomic for transaction_log index
(from https://patchwork.kernel.org/patch/
9817807/)
The log->next index for the transaction log was
not protected when incremented. This led to a
case where log->next++ resulted in an index
larger than ARRAY_SIZE(log->entry) and eventually
a bad access to memory.
Fixed by making the log index an atomic64 and
converting to an array by using "% ARRAY_SIZE(log->entry)"
Also added "complete" field to the log entry which is
written last to tell the print code whether the
entry is complete
Bug:
62038227
Test: tested manually
Change-Id: I1bb1c1a332a6ac458a626f5bedd05022b56b91f2
Signed-off-by: Todd Kjos <tkjos@google.com>
Martijn Coenen [Wed, 15 Mar 2017 17:22:52 +0000 (18:22 +0100)]
FROMLIST: binder: add more debug info when allocation fails.
(from https://patchwork.kernel.org/patch/
9817797/)
Bug:
36088202
Test: tested manually
Change-Id: Ib526a9c375e6136669b72f341e0b54d896fd1cec
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Siqi Lin <siqilin@google.com>
Todd Kjos [Fri, 21 Apr 2017 21:32:11 +0000 (14:32 -0700)]
FROMLIST: binder: protect against two threads freeing buffer
(from https://patchwork.kernel.org/patch/
9817815/)
Adds protection against malicious user code freeing
the same buffer at the same time which could cause
a crash. Cannot happen under normal use.
Bug:
36650912
Change-Id: I43e078cbf31c0789aaff5ceaf8f1a94c75f79d45
Test: tested manually
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Tue, 2 May 2017 00:21:51 +0000 (17:21 -0700)]
FROMLIST: binder: remove dead code in binder_get_ref_for_node
(from https://patchwork.kernel.org/patch/
9817819/)
node is always non-NULL in binder_get_ref_for_node so the
conditional and else clause are not needed
Change-Id: I23f011ba59e1869d9577e6bf28e1f1dd38f45713
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Fri, 6 Jan 2017 22:19:25 +0000 (14:19 -0800)]
FROMLIST: binder: don't modify thread->looper from other threads
(from https://patchwork.kernel.org/patch/
9817799/)
The looper member of struct binder_thread is a bitmask
of control bits. All of the existing bits are modified
by the affected thread except for BINDER_LOOPER_STATE_NEED_RETURN
which can be modified in binder_deferred_flush() by
another thread.
To avoid adding a spinlock around all read-mod-writes to
modify a bit, the BINDER_LOOPER_STATE_NEED_RETURN flag
is replaced by a separate field in struct binder_thread.
Bug:
33250092 32225111
Change-Id: Ia4cefbdbd683c6cb17c323ba7d278de5f2ca0745
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Tue, 9 May 2017 15:31:32 +0000 (08:31 -0700)]
FROMLIST: binder: avoid race conditions when enqueuing txn
(from https://patchwork.kernel.org/patch/
9817813/)
Currently, the transaction complete work item is queued
after the transaction. This means that it is possible
for the transaction to be handled and a reply to be
enqueued in the current thread before the transaction
complete is enqueued, which violates the protocol
with userspace who may not expect the transaction
complete. Fixed by always enqueing the transaction
complete first.
Also, once the transaction is enqueued, it is unsafe
to access since it might be freed. Currently,
t->flags is accessed to determine whether a sync
wake is needed. Changed to access tr->flags
instead.
Change-Id: I6c01566e167a39cf17c9027c3817618182e56975
Signed-off-by: Todd Kjos <tkjos@google.com>
Todd Kjos [Wed, 24 May 2017 17:51:01 +0000 (10:51 -0700)]
FROMLIST: binder: refactor queue management in binder_thread_read
(from https://patchwork.kernel.org/patch/
9817757/)
In binder_thread_read, the BINDER_WORK_NODE command is used
to communicate the references on the node to userspace. It
can take a couple of iterations in the loop to construct
the list of commands for user space. When locking is added,
the lock would need to be release on each iteration which
means the state could change. The work item is not dequeued
during this process which prevents a simpler queue management
that can just dequeue up front and handle the work item.
Fixed by changing the BINDER_WORK_NODE algorithm in
binder_thread_read to determine which commands to send
to userspace atomically in 1 pass so it stays consistent
with the kernel view.
The work item is now dequeued immediately since only
1 pass is needed.
Change-Id: I9b4109997b2d53ba661867b14d7336cd076be06d
Signed-off-by: Todd Kjos <tkjos@google.com>