Merge 4.4.105 into android-4.4

Changes in 4.4.105
bcache: only permit to recovery read error when cache device is clean
bcache: recover data from backing when data is clean
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
serial: 8250_pci: Add Amazon PCI serial device ID
s390/runtime instrumentation: simplify task exit handling
USB: serial: option: add Quectel BG96 id
ima: fix hash algorithm initialization
s390/pci: do not require AIS facility
selftests/x86/ldt_get: Add a few additional tests for limits
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
spi: sh-msiof: Fix DMA transfer size check
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
EDAC, sb_edac: Fix missing break in switch
sysrq : fix Show Regs call trace on ARM
perf test attr: Fix ignored test case result
kprobes/x86: Disable preemption in ftrace-based jprobes
net: systemport: Utilize skb_put_padto()
net: systemport: Pad packet before inserting TSB
ARM: OMAP1: DMA: Correct the number of logical channels
vti6: fix device register to report IFLA_INFO_KIND
net/appletalk: Fix kernel memory disclosure
ravb: Remove Rx overflow log messages
nfs: Don't take a reference on fl->fl_file for LOCK operation
KVM: arm/arm64: Fix occasional warning from the timer work function
NFSv4: Fix client recovery when server reboots multiple times
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
net: sctp: fix array overrun read on sctp_timer_tbl
tipc: fix cleanup at module unload
dmaengine: pl330: fix double lock
tcp: correct memory barrier usage in tcp_check_space()
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
xen-netfront: Improve error handling during initialization
net: fec: fix multicast filtering hardware setup
Revert "ocfs2: should wait dio before inode lock in ocfs2_setattr()"
usb: hub: Cycle HUB power when initialization fails
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
usb: Add USB 3.1 Precision time measurement capability descriptor support
usb: ch9: Add size macro for SSP dev cap descriptor
USB: core: Add type-specific length check of BOS descriptors
USB: Increase usbfs transfer limit
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: usbfs: Filter flags passed in from user space
usb: host: fix incorrect updating of offset
xen-netfront: avoid crashing on resume after a failure in talk_to_netback()
Linux 4.4.105

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.4.105

xen-netfront: avoid crashing on resume after a failure in talk_to_netback()

commit d86b5672b1adb98b4cdd6fbf0224bbfb03db6e2e upstream.

Unavoidable crashes in netfront_resume() and netback_changed() after a
previous fail in talk_to_netback() (e.g. when we fail to read MAC from
xenstore) were discovered. The failure path in talk_to_netback() does
unregister/free for netdev but we don't reset drvdata and we try accessing
it after resume.

Fix the bug by removing the whole xen device completely with
device_unregister(), this guarantees we won't have any calls into netfront
after a failure.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: fix incorrect updating of offset

commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream.

The variable temp is incorrectly being updated, instead it should
be offset otherwise the loop just reads the same capability value
and loops forever.  Thanks to Alan Stern for pointing out the
correct fix to my original fix.  Fix also cleans up clang warning:

drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp'
is never read

Fixes: d49d43174400 ("USB: misc ehci updates")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbfs: Filter flags passed in from user space

commit 446f666da9f019ce2ffd03800995487e79a91462 upstream.

USBDEVFS_URB_ISO_ASAP must be accepted only for ISO endpoints.
Improve sanity checking.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: devio: Prevent integer overflow in proc_do_submiturb()

commit 57999d1107c1e60c2ca7088f2ac0f819e2f554b3 upstream.

There used to be an integer overflow check in proc_do_submiturb() but
we removed it.  It turns out that it's still required.  The
uurb->buffer_length variable is a signed integer and it's controlled by
the user.  It can lead to an integer overflow when we do:

num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);

If we strip away the macro then that line looks like this:

num_sgs = (uurb->buffer_length + USB_SG_SIZE - 1) / USB_SG_SIZE;
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It's the first addition which can overflow.

Fixes: 1129d270cbfb ("USB: Increase usbfs transfer limit")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Increase usbfs transfer limit

commit 1129d270cbfbb7e2b1ec3dede4a13930bdd10e41 upstream.

Promote a variable keeping track of USB transfer memory usage to a
wider data type and allow for higher bandwidth transfers from a large
number of USB devices connected to a single host.

Signed-off-by: Mateusz Berezecki <mateuszb@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Add type-specific length check of BOS descriptors

commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream.

As most of BOS descriptors are longer in length than their header
'struct usb_dev_cap_header', comparing solely with it is not sufficient
to avoid out-of-bounds access to BOS descriptors.

This patch adds descriptor type specific length check in
usb_get_bos_descriptor() to fix the issue.

Signed-off-by: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ch9: Add size macro for SSP dev cap descriptor

commit 446fa3a95df1e8b78f25e1babc41e46edd200821 upstream.

The SuperspeedPlus Device Capability Descriptor has a variable size
depending on the number of sublink speed attributes.

This patch adds a macro to calculate that size. The macro takes one
argument, the Sublink Speed Attribute Count (SSAC) as reported by the
descriptor in bmAttributes[4:0].

See USB 3.1 9.6.2.5, Table 9-19.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Add USB 3.1 Precision time measurement capability descriptor support

commit faee822c5a7ab99de25cd34fcde3f8d37b6b9923 upstream.

USB 3.1 devices that support precision time measurement have an
additional PTM cabaility descriptor as part of the full BOS descriptor

Look for this descriptor while parsing the BOS descriptor, and store it in
struct usb_hub_bos if it exists.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix panic in xhci_free_virt_devices_depth_first

commit 80e457699a8dbdd70f2d26911e46f538645c55fc upstream.

Check vdev->real_port 0 to avoid panic
[    9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108
[    9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570
[    9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8
[    9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0
[    9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8
[    9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70
[    9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108
[    9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40
[    9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120
[    9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210
[    9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0
[    9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488
[    9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8
[    9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490
[    9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0
[    9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100
[    9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50

The problem can occur if xhci_plat_remove() is called shortly after
xhci_plat_probe(). While xhci_free_virt_devices_depth_first been
called before the device has been setup and get real_port initialized.
The problem occurred on Hikey960 and was reproduced by Guenter Roeck
on Kevin with chromeos-4.4.

Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first")
Cc: Guenter Roeck <groeck@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Fan Ning <fanning4@hisilicon.com>
Signed-off-by: Li Rui <lirui39@hisilicon.com>
Signed-off-by: yangdi <yangdi10@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Cycle HUB power when initialization fails

commit 973593a960ddac0f14f0d8877d2d0abe0afda795 upstream.

Sometimes the USB device gets confused about the state of the initialization and
the connection fails. In particular, the device thinks that it's already set up
and running while the host thinks the device still needs to be configured. To
work around this issue, power-cycle the hub's output to issue a sort of "reset"
to the device. This makes the device restart its state machine and then the
initialization succeeds.

This fixes problems where the kernel reports a list of errors like this:

usb 1-1.3: device not accepting address 19, error -71

The end result is a non-functioning device. After this patch, the sequence
becomes like this:

usb 1-1.3: new high-speed USB device number 18 using ci_hdrc
usb 1-1.3: device not accepting address 18, error -71
usb 1-1.3: new high-speed USB device number 19 using ci_hdrc
usb 1-1.3: device not accepting address 19, error -71
usb 1-1-port3: attempt power cycle
usb 1-1.3: new high-speed USB device number 21 using ci_hdrc
usb-storage 1-1.3:1.2: USB Mass Storage device detected

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ocfs2: should wait dio before inode lock in ocfs2_setattr()"

This reverts commit c4baa4a5870cb02f713def1620052bfca7a82bbb which is
commit 28f5a8a7c033cbf3e32277f4cc9c6afd74f05300 upstream.

It shouldn't be applied to the 4.4-stable tree.

Ben and Alex write:

> Now that ocfs2_setattr() calls this outside of the inode locked region,
> what prevents another task adding a new dio request immediately
> afterward?
>

In the kernel 4.6, firstly, we use the inode_lock() in do_truncate() to
prevent another bio to be issued from this node.
Furthermore, we use the ocfs2_rw_lock() and ocfs2_inode_lock() in ocfs2_setattr()
to guarantee no more bio will be issued from the other nodes in this cluster.

> Also, ocfs2_dio_end_io_write() was introduced in 4.6 and it looks like
> the dio completion path didn't previously take the inode lock.  So it
> doesn't look this fix is needed in 3.18 or 4.4.

Yes, ocfs2_dio_end_io_write() was introduced in 4.6 and the problem this patch
fixes is only exist in the kernel 4.6 and above 4.6.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Alex Chen <alex.chen@huawei.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: fix multicast filtering hardware setup

[ Upstream commit 01f8902bcf3ff124d0aeb88a774180ebcec20ace ]

Fix hardware setup of multicast address hash:
- Never clear the hardware hash (to avoid packet loss)
- Construct the hash register values in software and then write once
to hardware

Signed-off-by: Rui Sousa <rui.sousa@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: Improve error handling during initialization

[ Upstream commit e2e004acc7cbe3c531e752a270a74e95cde3ea48 ]

This fixes a crash when running out of grant refs when creating many
queues across many netdevs.

* If creating queues fails (i.e. there are no grant refs available),
call xenbus_dev_fatal() to ensure that the xenbus device is set to the
closed state.
* If no queues are created, don't call xennet_disconnect_backend as
netdev->real_num_tx_queues will not have been set correctly.
* If setup_netfront() fails, ensure that all the queues created are
cleaned up, not just those that have been set up.
* If any queues were set up and an error occurs, call
xennet_destroy_queues() to clean up the napi context.
* If any fatal error occurs, unregister and destroy the netdev to avoid
leaving around a half setup network device.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers

[ Upstream commit 0911d0041c22922228ca52a977d7b0b0159fee4b ]

Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this).  However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.

Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.

Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: correct memory barrier usage in tcp_check_space()

[ Upstream commit 56d806222ace4c3aeae516cd7a855340fb2839d8 ]

sock_reset_flag() maps to __clear_bit() not the atomic version clear_bit().
Thus, we need smp_mb(), smp_mb__after_atomic() is not sufficient.

Fixes: 3c7151275c0c ("tcp: add memory barriers to write space paths")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: pl330: fix double lock

[ Upstream commit 91539eb1fda2d530d3b268eef542c5414e54bf1a ]

The static bug finder EBA (http://www.iagoabal.eu/eba/) reported the
following double-lock bug:

    Double lock:
    1. spin_lock_irqsave(pch->lock, flags) at pl330_free_chan_resources:2236;
    2. call to function `pl330_release_channel' immediately after;
    3. call to function `dma_pl330_rqcb' in line 1753;
    4. spin_lock_irqsave(pch->lock, flags) at dma_pl330_rqcb:1505.

I have fixed it as suggested by Marek Szyprowski.

First, I have replaced `pch->lock' with `pl330->lock' in functions
`pl330_alloc_chan_resources' and `pl330_free_chan_resources'. This avoids
the double-lock by acquiring a different lock than `dma_pl330_rqcb'.

NOTE that, as a result, `pl330_free_chan_resources' executes
`list_splice_tail_init' on `pch->work_list' under lock `pl330->lock',
whereas in the rest of the code `pch->work_list' is protected by
`pch->lock'. I don't know if this may cause race conditions. Similarly
`pch->cyclic' is written by `pl330_alloc_chan_resources' under
`pl330->lock' but read by `pl330_tx_submit' under `pch->lock'.

Second, I have removed locking from `pl330_request_channel' and
`pl330_release_channel' functions. Function `pl330_request_channel' is
only called from `pl330_alloc_chan_resources', so the lock is already
held. Function `pl330_release_channel' is called from
`pl330_free_chan_resources', which already holds the lock, and from
`pl330_del'. Function `pl330_del' is called in an error path of
`pl330_probe' and at the end of `pl330_remove', but I assume that there
cannot be concurrent accesses to the protected data at those points.

Signed-off-by: Iago Abal <mail@iagoabal.eu>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix cleanup at module unload

[ Upstream commit 35e22e49a5d6a741ebe7f2dd280b2052c3003ef7 ]

In tipc_server_stop(), we iterate over the connections with limiting
factor as server's idr_in_use. We ignore the fact that this variable
is decremented in tipc_close_conn(), leading to premature exit.

In this commit, we iterate until the we have no connections left.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sctp: fix array overrun read on sctp_timer_tbl

[ Upstream commit 0e73fc9a56f22f2eec4d2b2910c649f7af67b74d ]

The comparison on the timeout can lead to an array overrun
read on sctp_timer_tbl because of an off-by-one error. Fix
this by using < instead of <= and also compare to the array
size rather than SCTP_EVENT_TIMEOUT_MAX.

Fixes CoverityScan CID#1397639 ("Out-of-bounds read")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement

[ Upstream commit 11d8bcef7a0399e1d2519f207fd575fc404306b4 ]

DECON_TV requires STANDALONE_UPDATE after output enabling, otherwise it does
not start. This change is neutral for DECON.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix client recovery when server reboots multiple times

[ Upstream commit c6180a6237174f481dc856ed6e890d8196b6f0fb ]

If the server reboots multiple times, the client should rely on the
server to tell it that it cannot reclaim state as per section 9.6.3.4
in RFC7530 and section 8.4.2.1 in RFC5661.
Currently, the client is being to conservative, and is assuming that
if the server reboots while state recovery is in progress, then it must
ignore state that was not recovered before the reboot.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Fix occasional warning from the timer work function

[ Upstream commit 63e41226afc3f7a044b70325566fa86ac3142538 ]

When a VCPU blocks (WFI) and has programmed the vtimer, we program a
soft timer to expire in the future to wake up the vcpu thread when
appropriate.  Because such as wake up involves a vcpu kick, and the
timer expire function can get called from interrupt context, and the
kick may sleep, we have to schedule the kick in the work function.

The work function currently has a warning that gets raised if it turns
out that the timer shouldn't fire when it's run, which was added because
the idea was that in that case the work should never have been cancelled.

However, it turns out that this whole thing is racy and we can get
spurious warnings.  The problem is that we clear the armed flag in the
work function, which may run in parallel with the
kvm_timer_unschedule->timer_disarm() call.  This results in a possible
situation where the timer_disarm() call does not call
cancel_work_sync(), which effectively synchronizes the completion of the
work function with running the VCPU.  As a result, the VCPU thread
proceeds before the work function completees, causing changes to the
timer state such that kvm_timer_should_fire(vcpu) returns false in the
work function.

All we do in the work function is to kick the VCPU, and an occasional
rare extra kick never harmed anyone.  Since the race above is extremely
rare, we don't bother checking if the race happens but simply remove the
check and the clearing of the armed flag from the work function.

Reported-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: Don't take a reference on fl->fl_file for LOCK operation

[ Upstream commit 4b09ec4b14a168bf2c687e1f598140c3c11e9222 ]

I have reports of a crash that look like __fput() was called twice for
a NFSv4.0 file.  It seems possible that the state manager could try to
reclaim a lock and take a reference on the fl->fl_file at the same time the
file is being released if, during the close(), a signal interrupts the wait
for outstanding IO while removing locks which then skips the removal
of that lock.

Since 83bfff23e9ed ("nfs4: have do_vfs_lock take an inode pointer") has
removed the need to traverse fl->fl_file->f_inode in nfs4_lock_done(),
taking that reference is no longer necessary.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ravb: Remove Rx overflow log messages

[ Upstream commit 18a3ed59d09cf81a6447aadf6931bf0c9ffec5e0 ]

Remove Rx overflow log messages as in an environment where logging results
in network traffic logging may cause further overflows.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[simon: reworked changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/appletalk: Fix kernel memory disclosure

[ Upstream commit ce7e40c432ba84da104438f6799d460a4cad41bc ]

ipddp_route structs contain alignment padding so kernel heap memory
is leaked when they are copied to user space in
ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear
that memory.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti6: fix device register to report IFLA_INFO_KIND

[ Upstream commit 93e246f783e6bd1bc64fdfbfe68b18161f69b28e ]

vti6 interface is registered before the rtnl_link_ops block
is attached. As a result the resulting RTM_NEWLINK is missing
IFLA_INFO_KIND. Re-order attachment of rtnl_link_ops block to fix.

Signed-off-by: Dave Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP1: DMA: Correct the number of logical channels

[ Upstream commit 657279778af54f35e54b07b6687918f254a2992c ]

OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels.
OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels
available.

The wired 17 for the lch_count must have been used to cover the 16 + 1
dedicated LCD channel, in reality we can only use 9 or 16 channels.

The d->chan_count is not used by the omap-dma stack, so we can skip the
setup. chan_count was configured to the number of logical channels and not
the actual number of physical channels anyways.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: Pad packet before inserting TSB

[ Upstream commit 38e5a85562a6cd911fc26d951d576551a688574c ]

Inserting the TSB means adding an extra 8 bytes in front the of packet
that is going to be used as metadata information by the TDMA engine, but
stripped off, so it does not really help with the packet padding.

For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP)
we can end-up padding them after the TSB insertion, thus making them 64
bytes, but with the TDMA stripping off the first 8 bytes, they could
still be smaller than 64 bytes which is required to ingress the switch.

Fix this by swapping the padding and TSB insertion, guaranteeing that
the packets have the right sizes.

Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: Utilize skb_put_padto()

[ Upstream commit bb7da333d0a9f3bddc08f84187b7579a3f68fd24 ]

Since we need to pad our packets, utilize skb_put_padto() which
increases skb->len by how much we need to pad, allowing us to eliminate
the test on skb->len right below.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/x86: Disable preemption in ftrace-based jprobes

[ Upstream commit 5bb4fc2d8641219732eb2bb654206775a4219aca ]

Disable preemption in ftrace-based jprobe handlers as
described in Documentation/kprobes.txt:

  "Probe handlers are run with preemption disabled."

This will fix jprobes behavior when CONFIG_PREEMPT=y.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/150581530024.32348.9863783558598926771.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf test attr: Fix ignored test case result

[ Upstream commit 22905582f6dd4bbd0c370fe5732c607452010c04 ]

Command perf test -v 16 (Setup struct perf_event_attr test) always
reports success even if the test case fails.  It works correctly if you
also specify -F (for don't fork).

   root@s35lp76 perf]# ./perf test -v 16
   15: Setup struct perf_event_attr               :
   --- start ---
   running './tests/attr/test-record-no-delay'
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.002 MB /tmp/tmp4E1h7R/perf.data
     (1 samples) ]
   expected task=0, got 1
   expected precise_ip=0, got 3
   expected wakeup_events=1, got 0
   FAILED './tests/attr/test-record-no-delay' - match failure
   test child finished with 0
   ---- end ----
   Setup struct perf_event_attr: Ok

The reason for the wrong error reporting is the return value of the
system() library call. It is called in run_dir() file tests/attr.c and
returns the exit status, in above case 0xff00.

This value is given as parameter to the exit() function which can only
handle values 0-0xff.

The child process terminates with exit value of 0 and the parent does
not detect any error.

This patch corrects the error reporting and prints the correct test
result.

Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170913081209.39570-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-rdube6rfcjsr1nzue72c7lqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysrq : fix Show Regs call trace on ARM

[ Upstream commit b00bebbc301c8e1f74f230dc82282e56b7e7a6db ]

When kernel configuration SMP,PREEMPT and DEBUG_PREEMPT are enabled,
echo 1 >/proc/sys/kernel/sysrq
echo p >/proc/sysrq-trigger
kernel will print call trace as below:

sysrq: SysRq : Show Regs
BUG: using __this_cpu_read() in preemptible [00000000] code: sh/435
caller is __this_cpu_preempt_check+0x18/0x20
Call trace:
[<ffffff8008088e80>] dump_backtrace+0x0/0x1d0
[<ffffff8008089074>] show_stack+0x24/0x30
[<ffffff8008447970>] dump_stack+0x90/0xb0
[<ffffff8008463950>] check_preemption_disabled+0x100/0x108
[<ffffff8008463998>] __this_cpu_preempt_check+0x18/0x20
[<ffffff80084c9194>] sysrq_handle_showregs+0x1c/0x40
[<ffffff80084c9c7c>] __handle_sysrq+0x12c/0x1a0
[<ffffff80084ca140>] write_sysrq_trigger+0x60/0x70
[<ffffff8008251e00>] proc_reg_write+0x90/0xd0
[<ffffff80081f1788>] __vfs_write+0x48/0x90
[<ffffff80081f241c>] vfs_write+0xa4/0x190
[<ffffff80081f3354>] SyS_write+0x54/0xb0
[<ffffff80080833f0>] el0_svc_naked+0x24/0x28

This can be seen on a common board like an r-pi3.
This happens because when echo p >/proc/sysrq-trigger,
get_irq_regs() is called outside of IRQ context,
if preemption is enabled in this situation,kernel will
print the call trace. Since many prior discussions on
the mailing lists have made it clear that get_irq_regs
either just returns NULL or stale data when used outside
of IRQ context,we simply avoid calling it outside of
IRQ context.

Signed-off-by: Jibin Xu <jibin.xu@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, sb_edac: Fix missing break in switch

[ Upstream commit a8e9b186f153a44690ad0363a56716e7077ad28c ]

Add missing break statement in order to prevent the code from falling
through.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20171016174029.GA19757@embeddedor.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()

[ Upstream commit da20ab35180780e4a6eadc804544f1fa967f3567 ]

We do not have tracepoints for sys_modify_ldt() because we define
it directly instead of using the normal SYSCALL_DEFINEx() macros.

However, there is a reason sys_modify_ldt() does not use the macros:
it has an 'int' return type instead of 'unsigned long'.  This is
a bug, but it's a bug cemented in the ABI.

What does this mean?  If we return -EINVAL from a function that
returns 'int', we have 0x00000000ffffffea in %rax.  But, if we
return -EINVAL from a function returning 'unsigned long', we end
up with 0xffffffffffffffea in %rax, which is wrong.

To work around this and maintain the 'int' behavior while using
the SYSCALL_DEFINEx() macros, so we add a cast to 'unsigned int'
in both implementations of sys_modify_ldt().

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171018172107.1A79C532@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X

[ Upstream commit 0ab84da2e076948c49d36197ee7d254125c53eab ]

The upper four bits of the XR17V35x fractional divisor register (DLD)
control general chip function (RS-485 direction pin polarity, multidrop
mode, XON/XOFF parity check, and fast IR mode). Don't allow these bits
to be clobbered when setting the baudrate.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: tahvo: fix error handling in tahvo_usb_probe()

[ Upstream commit ce035409bfa892a2fabb89720b542e1b335c3426 ]

If devm_extcon_dev_allocate() fails, we should disable clk before return.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 860d2686fda7 ("usb: phy: tahvo: Use devm_extcon_dev_[allocate|register]() and replace deprecated API")
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: sh-msiof: Fix DMA transfer size check

[ Upstream commit 36735783fdb599c94b9c86824583df367c65900b ]

DMA supports 32-bit words only,
even if BITLEN1 of SITMDR2 register is 16bit.

Fixes: b0d0ce8b6b91 ("spi: sh-msiof: Add DMA support")
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()

[ Upstream commit 3236a965486ba0c6043cf2c7b51943d8b382ae29 ]

This driver's ->rs485_config callback checks if SER_RS485_RTS_ON_SEND
and SER_RS485_RTS_AFTER_SEND have the same value.  If they do, it means
the user has passed in invalid data with the TIOCSRS485 ioctl()
since RTS must have a different polarity when sending and when not
sending.  In this case, rs485 mode is not enabled (the RS485_URA bit
is not set in the RS485 Enable Register) and this is supposed to be
signaled back to the user by clearing the SER_RS485_ENABLED bit in
struct serial_rs485 ... except a missing tilde character is preventing
that from happening.

Fixes: 28e3fb6c4dce ("serial: Add support for Fintek F81216A LPC to 4 UART")
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Cc: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/ldt_get: Add a few additional tests for limits

[ Upstream commit fec8f5ae1715a01c72ad52cb2ecd8aacaf142302 ]

We weren't testing the .limit and .limit_in_pages fields very well.
Add more tests.

This addition seems to trigger the "bits 16:19 are undefined" issue
that was fixed in an earlier patch.  I think that, at least on my
CPU, the high nibble of the limit ends in LAR bits 16:19.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5601c15ea9b3113d288953fd2838b18bedf6bc67.1509794321.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: do not require AIS facility

[ Upstream commit 48070c73058be6de9c0d754d441ed7092dfc8f12 ]

As of today QEMU does not provide the AIS facility to its guest.  This
prevents Linux guests from using PCI devices as the ais facility is
checked during init. As this is just a performance optimization, we can
move the ais check into the code where we need it (calling the SIC
instruction). This is used at initialization and on interrupt. Both
places do not require any serialization, so we can simply skip the
instruction.

Since we will now get all interrupts, we can also avoid the 2nd scan.
As we can have multiple interrupts in parallel we might trigger spurious
irqs more often for the non-AIS case but the core code can handle that.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: fix hash algorithm initialization

[ Upstream commit ebe7c0a7be92bbd34c6ff5b55810546a0ee05bee ]

The hash_setup function always sets the hash_setup_done flag, even
when the hash algorithm is invalid.  This prevents the default hash
algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used.

This patch sets hash_setup_done flag only for valid hash algorithms.

Fixes: e7a2ad7eb6f4 "ima: enable support for larger default filedata hash algorithms"
Signed-off-by: Boshi Wang <wangboshi@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Quectel BG96 id

commit c654b21ede93845863597de9ad774fd30db5f2ab upstream.

Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both
CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel
development board (EVB). The USB id is added to option.c to allow
DIAG,GPS,AT and modem communication with the BG96.

Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/runtime instrumentation: simplify task exit handling

commit 8d9047f8b967ce6181fd824ae922978e1b055cc0 upstream.

Free data structures required for runtime instrumentation from
arch_release_task_struct(). This allows to simplify the code a bit,
and also makes the semantics a bit easier: arch_release_task_struct()
is never called from the task that is being removed.

In addition this allows to get rid of exit_thread() in a later patch.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_pci: Add Amazon PCI serial device ID

commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream.

This device will be used in future Amazon EC2 instances as the primary
serial port (i.e., data sent to this port will be available via the
GetConsoleOuput [1] EC2 API).

[1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.html

Signed-off-by: Matt Wilson <msw@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub

commit e43a12f1793ae1fe006e26fe9327a8840a92233c upstream.

KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect
to Realtek r8153.

Similar to commit ("7496cfe5431f2 usb: quirks: Add no-lpm quirk for Moshi
USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices

commit 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 upstream.

We've been adding this as a quirk on a per device basis hoping that
newer disk enclosures would do better, but that has not happened,
so simply apply this quirk to all Seagate devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: recover data from backing when data is clean

commit e393aa2446150536929140739f09c6ecbcbea7f0 upstream.

When we send a read request and hit the clean data in cache device, there
is a situation called cache read race in bcache(see the commit in the tail
of cache_look_up(), the following explaination just copy from there):
The bucket we're reading from might be reused while our bio is in flight,
and we could then end up reading the wrong data. We guard against this
by checking (in bch_cache_read_endio()) if the pointer is stale again;
if so, we treat it as an error (s->iop.error = -EINTR) and reread from
the backing device (but we don't pass that error up anywhere)

It should be noted that cache read race happened under normal
circumstances, not the circumstance when SSD failed, it was counted
and shown in  /sys/fs/bcache/XXX/internal/cache_read_races.

Without this patch, when we use writeback mode, we will never reread from
the backing device when cache read race happened, until the whole cache
device is clean, because the condition
(s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in
cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR)
will be passed up, at last, user will receive -EINTR when it's bio end,
this is not suitable, and wield to up-application.

In this patch, we use s->read_dirty_data to judge whether the read
request hit dirty data in cache device, it is safe to reread data from
the backing device when the read request hit clean data. This can not
only handle cache read race, but also recover data when failed read
request from cache device.

[edited by mlyle to fix up whitespace, commit log title, comment
spelling]

Fixes: d59b23795933 ("bcache: only permit to recovery read error when cache device is clean")
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: only permit to recovery read error when cache device is clean

commit d59b23795933678c9638fd20c942d2b4f3cd6185 upstream.

When bcache does read I/Os, for example in writeback or writethrough mode,
if a read request on cache device is failed, bcache will try to recovery
the request by reading from cached device. If the data on cached device is
not synced with cache device, then requester will get a stale data.

For critical storage system like database, providing stale data from
recovery may result an application level data corruption, which is
unacceptible.

With this patch, for a failed read request in writeback or writethrough
mode, recovery a recoverable read request only happens when cache device
is clean. That is to say, all data on cached device is up to update.

For other cache modes in bcache, read request will never hit
cached_dev_read_error(), they don't need this patch.

Please note, because cache mode can be switched arbitrarily in run time, a
writethrough mode might be switched from a writeback mode. Therefore
checking dc->has_data in writethrough mode still makes sense.

Changelog:
V4: Fix parens error pointed by Michael Lyle.
v3: By response from Kent Oversteet, he thinks recovering stale data is a
    bug to fix, and option to permit it is unnecessary. So this version
    the sysfs file is removed.
v2: rename sysfs entry from allow_stale_data_on_failure  to
    allow_stale_data_on_failure, and fix the confusing commit log.
v1: initial patch posted.

[small change to patch comment spelling by mlyle]

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Arne Wolf <awolf@lenovo.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Kai Krakow <hurikhan77@gmail.com>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: initramfs: call free_initrd() when skipping init

Memory allocated for initrd would not be reclaimed if initializing ramfs
was skipped.

Bug: 69901741
Test: "grep MemTotal /proc/meminfo" increases by a few MB on an Android
device with a/b boot.

Change-Id: Ifbe094d303ed12cfd6de6aa004a8a19137a2f58a
Signed-off-by: Nick Bray <ncbray@google.com>

Merge 4.4.104 into android-4.4

Changes in 4.4.104
netlink: add a start callback for starting a netlink dump
ipsec: Fix aborted xfrm policy dump crash
x86/mm/pat: Ensure cpa->pfn only contains page frame numbers
x86/efi: Hoist page table switching code into efi_call_virt()
x86/efi: Build our own page table structures
ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpio
x86/efi-bgrt: Fix kernel panic when mapping BGRT data
x86/efi-bgrt: Replace early_memremap() with memremap()
mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()
mm/madvise.c: fix madvise() infinite loop under special circumstances
btrfs: clear space cache inode generation always
KVM: x86: pvclock: Handle first-time write to pvclock-page contains random junk
KVM: x86: Exit to user-mode on #UD intercept when emulator requires
KVM: x86: inject exceptions produced by x86_decode_insn
mmc: core: Do not leave the block driver in a suspended state
eeprom: at24: check at24_read/write arguments
bcache: Fix building error on MIPS
Revert "drm/radeon: dont switch vt on suspend"
drm/radeon: fix atombios on big endian
drm/panel: simple: Add missing panel_simple_unprepare() calls
mtd: nand: Fix writing mtdoops to nand flash.
NFS: revalidate "." etc correctly on "open".
drm/i915: Don't try indexed reads to alternate slave addresses
drm/i915: Prevent zero length "index" write
nfsd: Make init_open_stateid() a bit more whole
nfsd: Fix stateid races between OPEN and CLOSE
nfsd: Fix another OPEN stateid race
Linux 4.4.104

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.4.104

nfsd: Fix another OPEN stateid race

commit d8a1a000555ecd1b824ac1ed6df8fe364dfbbbb0 upstream.

If nfsd4_process_open2() is initialising a new stateid, and yet the
call to nfs4_get_vfs_file() fails for some reason, then we must
declare the stateid closed, and unhash it before dropping the mutex.

Right now, we unhash the stateid after dropping the mutex, and without
changing the stateid type, meaning that another OPEN could theoretically
look it up and attempt to use it.

Reported-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Fix stateid races between OPEN and CLOSE

commit 15ca08d3299682dc49bad73251677b2c5017ef08 upstream.

Open file stateids can linger on the nfs4_file list of stateids even
after they have been closed. In order to avoid reusing such a
stateid, and confusing the client, we need to recheck the
nfs4_stid's type after taking the mutex.
Otherwise, we risk reusing an old stateid that was already closed,
which will confuse clients that expect new stateids to conform to
RFC7530 Sections 9.1.4.2 and 16.2.5 or RFC5661 Sections 8.2.2 and 18.2.4.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Make init_open_stateid() a bit more whole

commit 8c7245abda877d4689b3371db8ae2a4400d7d9ce upstream.

Move the state selection logic inside from the caller,
always making it return correct stp to use.

Signed-off-by: J . Bruce Fields <bfields@fieldses.org>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Prevent zero length "index" write

commit 56350fb8978bbf4aafe08f21234e161dd128b417 upstream.

The hardware always writes one or two bytes in the index portion of
an indexed transfer. Make sure the message we send as the index
doesn't have a zero length.

Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit bb9e0d4bca50f429152e74a459160b41f3d60fb2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Don't try indexed reads to alternate slave addresses

commit ae5c631e605a452a5a0e73205a92810c01ed954b upstream.

We can only specify the one slave address to indexed reads/writes.
Make sure the messages we check are destined to the same slave
address before deciding to do an indexed transfer.

Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit c4deb62d7821672265b87952bcd1c808f3bf3e8f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: revalidate "." etc correctly on "open".

commit b688741cb06695312f18b730653d6611e1bad28d upstream.

For correct close-to-open semantics, NFS must validate
the change attribute of a directory (or file) on open.

Since commit ecf3d1f1aa74 ("vfs: kill FS_REVAL_DOT by adding a
d_weak_revalidate dentry op"), open() of "." or a path ending ".." is
not revalidated reliably (except when that direct is a mount point).

Prior to that commit, "." was revalidated using nfs_lookup_revalidate()
which checks the LOOKUP_OPEN flag and forces revalidation if the flag is
set.
Since that commit, nfs_weak_revalidate() is used for NFSv3 (which
ignores the flags) and nothing is used for NFSv4.

This is fixed by using nfs_lookup_verify_inode() in
nfs_weak_revalidate().  This does the revalidation exactly when needed.
Also, add a definition of .d_weak_revalidate for NFSv4.

The incorrect behavior is easily demonstrated by running "echo *" in
some non-mountpoint NFS directory while watching network traffic.
Without this patch, "echo *" sometimes doesn't produce any traffic.
With the patch it always does.

Fixes: ecf3d1f1aa74 ("vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op")
cc: stable@vger.kernel.org (3.9+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: Fix writing mtdoops to nand flash.

commit 30863e38ebeb500a31cecee8096fb5002677dd9b upstream.

When mtdoops calls mtd_panic_write(), it eventually calls
panic_nand_write() in nand_base.c. In order to properly wait for the
nand chip to be ready in panic_nand_wait(), the chip must first be
selected.

When using the atmel nand flash controller, a panic would occur due to
a NULL pointer exception.

Fixes: 2af7c6539931 ("mtd: Add panic_write for NAND flashes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brent Taylor <motobud@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panel: simple: Add missing panel_simple_unprepare() calls

commit f3621a8eb59a913612c8e6e37d81f16b649f8b6c upstream.

During panel removal or system shutdown panel_simple_disable() is called
which disables the panel backlight but the panel is still powered due to
missing calls to panel_simple_unprepare().

Fixes: d02fd93e2cd8 ("drm/panel: simple - Disable panel on shutdown")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170807115545.27747-1-net147@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix atombios on big endian

commit 4f626a4ac8f57ddabf06d03870adab91e463217f upstream.

The function for byteswapping the data send to/from atombios was buggy for
num_bytes not divisible by four. The function must be aware of the fact
that after byte-swapping the u32 units, valid bytes might end up after the
num_bytes boundary.

This patch was tested on kernel 3.12 and allowed us to sucesfully use
DisplayPort on and Radeon SI card. Namely it fixed the link training and
EDID readout.

The function is patched both in radeon and amd drivers, since the functions
and the fixes are identical.

Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/radeon: dont switch vt on suspend"

commit 18c437caa5b18a235dd65cec224eab54bebcee65 upstream.

Fixes distorted colors on some cards on resume from suspend.

This reverts commit b9729b17a414f99c61f4db9ac9f9ed987fa0cbfe.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98832
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99163
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=107001
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: Fix building error on MIPS

commit cf33c1ee5254c6a430bc1538232b49c3ea13e613 upstream.

This patch try to fix the building error on MIPS. The reason is MIPS
has already defined the PTR macro, which conflicts with the PTR macro
in include/uapi/linux/bcache.h.

[fixed by mlyle: corrected a line-length issue]

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eeprom: at24: check at24_read/write arguments

commit d9bcd462daf34aebb8de9ad7f76de0198bb5a0f0 upstream.

So far we completely rely on the caller to provide valid arguments.
To be on the safe side perform an own sanity check.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Do not leave the block driver in a suspended state

commit ebe7dd45cf49e3b49cacbaace17f9f878f21fbea upstream.

The block driver must be resumed if the mmc bus fails to suspend the card.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: inject exceptions produced by x86_decode_insn

commit 6ea6e84309ca7e0e850b3083e6b09344ee15c290 upstream.

Sometimes, a processor might execute an instruction while another
processor is updating the page tables for that instruction's code page,
but before the TLB shootdown completes.  The interesting case happens
if the page is in the TLB.

In general, the processor will succeed in executing the instruction and
nothing bad happens.  However, what if the instruction is an MMIO access?
If *that* happens, KVM invokes the emulator, and the emulator gets the
updated page tables.  If the update side had marked the code page as non
present, the page table walk then will fail and so will x86_decode_insn.

Unfortunately, even though kvm_fetch_guest_virt is correctly returning
X86EMUL_PROPAGATE_FAULT, x86_decode_insn's caller treats the failure as
a fatal error if the instruction cannot simply be reexecuted (as is the
case for MMIO).  And this in fact happened sometimes when rebooting
Windows 2012r2 guests.  Just checking ctxt->have_exception and injecting
the exception if true is enough to fix the case.

Thanks to Eduardo Habkost for helping in the debugging of this issue.

Reported-by: Yanan Fu <yfu@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Exit to user-mode on #UD intercept when emulator requires

commit 61cb57c9ed631c95b54f8e9090c89d18b3695b3c upstream.

Instruction emulation after trapping a #UD exception can result in an
MMIO access, for example when emulating a MOVBE on a processor that
doesn't support the instruction.  In this case, the #UD vmexit handler
must exit to user mode, but there wasn't any code to do so.  Add it for
both VMX and SVM.

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: pvclock: Handle first-time write to pvclock-page contains random junk

commit 51c4b8bba674cfd2260d173602c4dac08e4c3a99 upstream.

When guest passes KVM it's pvclock-page GPA via WRMSR to
MSR_KVM_SYSTEM_TIME / MSR_KVM_SYSTEM_TIME_NEW, KVM don't initialize
pvclock-page to some start-values. It just requests a clock-update which
will happen before entering to guest.

The clock-update logic will call kvm_setup_pvclock_page() to update the
pvclock-page with info. However, kvm_setup_pvclock_page() *wrongly*
assumes that the version-field is initialized to an even number. This is
wrong because at first-time write, field could be any-value.

Fix simply makes sure that if first-time version-field is odd, increment
it once more to make it even and only then start standard logic.
This follows same logic as done in other pvclock shared-pages (See
kvm_write_wall_clock() and record_steal_time()).

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: clear space cache inode generation always

commit 8e138e0d92c6c9d3d481674fb14e3439b495be37 upstream.

We discovered a box that had double allocations, and suspected the space
cache may be to blame.  While auditing the write out path I noticed that
if we've already setup the space cache we will just carry on.  This
means that any error we hit after cache_save_setup before we go to
actually write the cache out we won't reset the inode generation, so
whatever was already written will be considered correct, except it'll be
stale.  Fix this by _always_ resetting the generation on the block group
inode, this way we only ever have valid or invalid cache.

With this patch I was no longer able to reproduce cache corruption with
dm-log-writes and my bpf error injection tool.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/madvise.c: fix madvise() infinite loop under special circumstances

commit 6ea8d958a2c95a1d514015d4e29ba21a8c0a1a91 upstream.

MADVISE_WILLNEED has always been a noop for DAX (formerly XIP) mappings.
Unfortunately madvise_willneed() doesn't communicate this information
properly to the generic madvise syscall implementation.  The calling
convention is quite subtle there.  madvise_vma() is supposed to either
return an error or update &prev otherwise the main loop will never
advance to the next vma and it will keep looping for ever without a way
to get out of the kernel.

It seems this has been broken since introduction.  Nobody has noticed
because nobody seems to be using MADVISE_WILLNEED on these DAX mappings.

[mhocko@suse.com: rewrite changelog]
Link: http://lkml.kernel.org/r/20171127115318.911-1-guoxuenan@huawei.com
Fixes: fe77ba6f4f97 ("[PATCH] xip: madvice/fadvice: execute in place")
Signed-off-by: chenjie <chenjie6@huawei.com>
Signed-off-by: guoxuenan <guoxuenan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: zhangyi (F) <yi.zhang@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()

commit a8f97366452ed491d13cf1e44241bc0b5740b1f0 upstream.

Currently, we unconditionally make page table dirty in touch_pmd().
It may result in false-positive can_follow_write_pmd().

We may avoid the situation, if we would only make the page table entry
dirty if caller asks for write access -- FOLL_WRITE.

The patch also changes touch_pud() in the same way.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Salvatore Bonaccorso: backport for 3.16:
 - Adjust context
 - Drop specific part for PUD-sized transparent hugepages. Support
   for PUD-sized transparent hugepages was added in v4.11-rc1
]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/efi-bgrt: Replace early_memremap() with memremap()

commit e2c90dd7e11e3025b46719a79fb4bb1e7a5cef9f upstream.

Môshe reported the following warning triggered on his machine since
commit 50a0cb565246 ("x86/efi-bgrt: Fix kernel panic when mapping BGRT
data"),

  [    0.026936] ------------[ cut here ]------------
  [    0.026941] WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:137 __early_ioremap+0x102/0x1bb()
  [    0.026941] Modules linked in:
  [    0.026944] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1 #2
  [    0.026945] Hardware name: Dell Inc. XPS 13 9343/09K8G1, BIOS A05 07/14/2015
  [    0.026946]  0000000000000000 900f03d5a116524d ffffffff81c03e60 ffffffff813a3fff
  [    0.026948]  0000000000000000 ffffffff81c03e98 ffffffff810a0852 00000000d7b76000
  [    0.026949]  0000000000000000 0000000000000001 0000000000000001 000000000000017c
  [    0.026951] Call Trace:
  [    0.026955]  [<ffffffff813a3fff>] dump_stack+0x44/0x55
  [    0.026958]  [<ffffffff810a0852>] warn_slowpath_common+0x82/0xc0
  [    0.026959]  [<ffffffff810a099a>] warn_slowpath_null+0x1a/0x20
  [    0.026961]  [<ffffffff81d8c395>] __early_ioremap+0x102/0x1bb
  [    0.026962]  [<ffffffff81d8c602>] early_memremap+0x13/0x15
  [    0.026964]  [<ffffffff81d78361>] efi_bgrt_init+0x162/0x1ad
  [    0.026966]  [<ffffffff81d778ec>] efi_late_init+0x9/0xb
  [    0.026968]  [<ffffffff81d58ff5>] start_kernel+0x46f/0x49f
  [    0.026970]  [<ffffffff81d58120>] ? early_idt_handler_array+0x120/0x120
  [    0.026972]  [<ffffffff81d58339>] x86_64_start_reservations+0x2a/0x2c
  [    0.026974]  [<ffffffff81d58485>] x86_64_start_kernel+0x14a/0x16d
  [    0.026977] ---[ end trace f9b3812eb8e24c58 ]---
  [    0.026978] efi_bgrt: Ignoring BGRT: failed to map image memory

early_memremap() has an upper limit on the size of mapping it can
handle which is ~200KB. Clearly the BGRT image on Môshe's machine is
much larger than that.

There's actually no reason to restrict ourselves to using the early_*
version of memremap() - the ACPI BGRT driver is invoked late enough in
boot that we can use the standard version, with the benefit that the
late version allows mappings of arbitrary size.

Reported-by: Môshe van der Sterre <me@moshe.nl>
Tested-by: Môshe van der Sterre <me@moshe.nl>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1450707172-12561-1-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/efi-bgrt: Fix kernel panic when mapping BGRT data

commit 50a0cb565246f20d59cdb161778531e4b19d35ac upstream.

Starting with this commit 35eb8b81edd4 ("x86/efi: Build our own page
table structures") efi regions have a separate page directory called
"efi_pgd". In order to access any efi region we have to first shift %cr3
to this page table. In the bgrt code we are trying to copy bgrt_header
and image, but these regions fall under "EFI_BOOT_SERVICES_DATA"
and to access these regions we have to shift %cr3 to efi_pgd and not
doing so will cause page fault as shown below.

[    0.251599] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.259126] Freeing SMP alternatives memory: 32K (ffffffff8230e000 - ffffffff82316000)
[    0.271803] BUG: unable to handle kernel paging request at fffffffefce35002
[    0.279740] IP: [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd
[    0.286383] PGD 300f067 PUD 0
[    0.289879] Oops: 0000 [#1] SMP
[    0.293566] Modules linked in:
[    0.297039] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1-eywa-eywa-built-in-47041+ #2
[    0.306619] Hardware name: Intel Corporation Skylake Client platform/Skylake Y LPDDR3 RVP3, BIOS SKLSE2R1.R00.B104.B01.1511110114 11/11/2015
[    0.320925] task: ffffffff820134c0 ti: ffffffff82000000 task.ti: ffffffff82000000
[    0.329420] RIP: 0010:[<ffffffff821bca49>]  [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd
[    0.338821] RSP: 0000:ffffffff82003f18  EFLAGS: 00010246
[    0.344852] RAX: fffffffefce35000 RBX: fffffffefce35000 RCX: fffffffefce2b000
[    0.352952] RDX: 000000008a82b000 RSI: ffffffff8235bb80 RDI: 000000008a835000
[    0.361050] RBP: ffffffff82003f30 R08: 000000008a865000 R09: ffffffffff202850
[    0.369149] R10: ffffffff811ad62f R11: 0000000000000000 R12: 0000000000000000
[    0.377248] R13: ffff88016dbaea40 R14: ffffffff822622c0 R15: ffffffff82003fb0
[    0.385348] FS:  0000000000000000(0000) GS:ffff88016d800000(0000) knlGS:0000000000000000
[    0.394533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.401054] CR2: fffffffefce35002 CR3: 000000000300c000 CR4: 00000000003406f0
[    0.409153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    0.417252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    0.425350] Stack:
[    0.427638]  ffffffffffffffff ffffffff82256900 ffff88016dbaea40 ffffffff82003f40
[    0.436086]  ffffffff821bbce0 ffffffff82003f88 ffffffff8219c0c2 0000000000000000
[    0.444533]  ffffffff8219ba4a ffffffff822622c0 0000000000083000 00000000ffffffff
[    0.452978] Call Trace:
[    0.455763]  [<ffffffff821bbce0>] efi_late_init+0x9/0xb
[    0.461697]  [<ffffffff8219c0c2>] start_kernel+0x463/0x47f
[    0.467928]  [<ffffffff8219ba4a>] ? set_init_arg+0x55/0x55
[    0.474159]  [<ffffffff8219b120>] ? early_idt_handler_array+0x120/0x120
[    0.481669]  [<ffffffff8219b5ee>] x86_64_start_reservations+0x2a/0x2c
[    0.488982]  [<ffffffff8219b72d>] x86_64_start_kernel+0x13d/0x14c
[    0.495897] Code: 00 41 b4 01 48 8b 78 28 e8 09 36 01 00 48 85 c0 48 89 c3 75 13 48 c7 c7 f8 ac d3 81 31 c0 e8 d7 3b fb fe e9 b5 00 00 00 45 84 e4 <44> 8b 6b 02 74 0d be 06 00 00 00 48 89 df e8 ae 34 0$
[    0.518151] RIP  [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd
[    0.524888]  RSP <ffffffff82003f18>
[    0.528851] CR2: fffffffefce35002
[    0.532615] ---[ end trace 7b06521e6ebf2aea ]---
[    0.537852] Kernel panic - not syncing: Attempted to kill the idle task!

As said above one way to fix this bug is to shift %cr3 to efi_pgd but we
are not doing that way because it leaks inner details of how we switch
to EFI page tables into a new call site and it also adds duplicate code.
Instead, we remove the call to efi_lookup_mapped_addr() and always
perform early_mem*() instead of early_io*() because we want to remap RAM
regions and not I/O regions. We also delete efi_lookup_mapped_addr()
because we are no longer using it.

Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Reported-by: Wendy Wang <wendy.wang@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpio

commit b7ace5ed8867ca54503727988adec6b20af54eeb upstream.

Fixes commit 687c27676151 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")

This patch corrects an issue where the cd-gpios was improperly setup
using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/efi: Build our own page table structures

commit 67a9108ed4313b85a9c53406d80dc1ae3f8c3e36 upstream.

With commit e1a58320a38d ("x86/mm: Warn on W^X mappings") all
users booting on 64-bit UEFI machines see the following warning,

  ------------[ cut here ]------------
  WARNING: CPU: 7 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5dc/0x780()
  x86/mm: Found insecure W+X mapping at address ffff88000005f000/0xffff88000005f000
  ...
  x86/mm: Checked W+X mappings: FAILED, 165660 W+X pages found.
  ...

This is caused by mapping EFI regions with RWX permissions.
There isn't much we can do to restrict the permissions for these
regions due to the way the firmware toolchains mix code and
data, but we can at least isolate these mappings so that they do
not appear in the regular kernel page tables.

In commit d2f7cbe7b26a ("x86/efi: Runtime services virtual
mapping") we started using 'trampoline_pgd' to map the EFI
regions because there was an existing identity mapping there
which we use during the SetVirtualAddressMap() call and for
broken firmware that accesses those addresses.

But 'trampoline_pgd' shares some PGD entries with
'swapper_pg_dir' and does not provide the isolation we require.
Notably the virtual address for __START_KERNEL_map and
MODULES_START are mapped by the same PGD entry so we need to be
more careful when copying changes over in
efi_sync_low_kernel_mappings().

This patch doesn't go the full mile, we still want to share some
PGD entries with 'swapper_pg_dir'. Having completely separate
page tables brings its own issues such as synchronising new
mappings after memory hotplug and module loading. Sharing also
keeps memory usage down.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1448658575-17029-6-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/efi: Hoist page table switching code into efi_call_virt()

commit c9f2a9a65e4855b74d92cdad688f6ee4a1a323ff upstream.

This change is a prerequisite for pending patches that switch to
a dedicated EFI page table, instead of using 'trampoline_pgd'
which shares PGD entries with 'swapper_pg_dir'. The pending
patches make it impossible to dereference the runtime service
function pointer without first switching %cr3.

It's true that we now have duplicated switching code in
efi_call_virt() and efi_call_phys_{prolog,epilog}() but we are
sacrificing code duplication for a little more clarity and the
ease of writing the page table switching code in C instead of
asm.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1448658575-17029-5-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pat: Ensure cpa->pfn only contains page frame numbers

commit edc3b9129cecd0f0857112136f5b8b1bc1d45918 upstream.

The x86 pageattr code is confused about the data that is stored
in cpa->pfn, sometimes it's treated as a page frame number,
sometimes it's treated as an unshifted physical address, and in
one place it's treated as a pte.

The result of this is that the mapping functions do not map the
intended physical address.

This isn't a problem in practice because most of the addresses
we're mapping in the EFI code paths are already mapped in
'trampoline_pgd' and so the pageattr mapping functions don't
actually do anything in this case. But when we move to using a
separate page table for the EFI runtime this will be an issue.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1448658575-17029-3-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipsec: Fix aborted xfrm policy dump crash

commit 1137b5e2529a8f5ca8ee709288ecba3e68044df2 upstream.

An independent security researcher, Mohamed Ghannam, has reported
this vulnerability to Beyond Security's SecuriTeam Secure Disclosure
program.

The xfrm_dump_policy_done function expects xfrm_dump_policy to
have been called at least once or it will crash.  This can be
triggered if a dump fails because the target socket's receive
buffer is full.

This patch fixes it by using the cb->start mechanism to ensure that
the initialisation is always done regardless of the buffer situation.

Fixes: 12a169e7d8f4 ("ipsec: Put dumpers on the dump list")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: add a start callback for starting a netlink dump

commit fc9e50f5a5a4e1fa9ba2756f745a13e693cf6a06 upstream.

The start callback allows the caller to set up a context for the
dump callbacks. Presumably, the context can then be destroyed in
the done callback.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: tee subsystem and op-tee driver

Change-Id: Ib5a195b501598bd6c7b869849938ab61797309ee
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit 6a6e77006fcdba89708214556c6d560323e850fc)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

tee: add OP-TEE driver

Adds a OP-TEE driver which also can be compiled as a loadable module.

* Targets ARM and ARM64
* Supports using reserved memory from OP-TEE as shared memory
* Probes OP-TEE version using SMCs
* Accepts requests on privileged and unprivileged device
* Uses OPTEE message protocol version 2 to communicate with secure world

Change-Id: Iffaf30a91fff2d29dd87e61173c564271bcc7776
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Tested-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit 4fb0a5eb364d239722e745c02aef0dbd4e0f1ad2)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

tee: generic TEE subsystem

Initial patch for generic TEE subsystem.
This subsystem provides:
* Registration/un-registration of TEE drivers.
* Shared memory between normal world and secure world.
* Ioctl interface for interaction with user space.
* Sysfs implementation_id of TEE driver

A TEE (Trusted Execution Environment) driver is a driver that interfaces
with a trusted OS running in some secure environment, for example,
TrustZone on ARM cpus, or a separate secure co-processor etc.

The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.

This patch builds on other similar implementations trying to solve
the same problem:
* "optee_linuxdriver" by among others
  Jean-michel DELORME<jean-michel.delorme@st.com> and
  Emmanuel MICHEL <emmanuel.michel@st.com>
* "Generic TrustZone Driver" by Javier González <javier@javigon.com>

Change-Id: I35b763e23b706383df5013c429c510c68d7f4176
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Tested-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit 967c9cca2cc50569efc65945325c173cecba83bd)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

dt/bindings: add bindings for optee

Introduces linaro prefix and adds bindings for ARM TrustZone based OP-TEE
implementation.

Change-Id: If4b626d0e8a14e2f1cdeac8aa0837e8ddc4dcbdd
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit c8bfafb1594435889b571b79325011e8b7fd087b)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

kernel.h: add u64_to_user_ptr()

This function had copies in 3 different files. Unify them in kernel.h.

Change-Id: Iff8fbe002d3ceb81068e9cbd0acdf5fd5be14783
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@intel.com> [drm/i915/]
Acked-by: Rob Clark <robdclark@gmail.com> [drm/msm/]
Acked-by: Lucas Stach <l.stach@pengutronix.de> [drm/etinav/]
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 3ed605bc8a0a688d8750a1e2eff39c854418c5cf)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

ARM: 8481/2: drivers: psci: replace psci firmware calls

Switch to use a generic interface for issuing SMC/HVC based on ARM SMC
Calling Convention. Removes now the now unused psci-call.S.

Change-Id: Ic3be85884c9d4726211346c6ecfff60ca51b08b7
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit e679660dbb8347f275fe5d83a5dd59c1fb6c8e63)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

ARM: 8480/2: arm64: add implementation for arm-smccc

Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC.

Change-Id: Iee20985ae688c68c5f3d6494545718c70057661b
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 14457459f9ca2ff8521686168ea179edc3a56a44)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

ARM: 8479/2: add implementation for arm-smccc

Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for
architectures that may support arm-smccc. It's the responsibility of the
caller to know if the SMC instruction is supported by the platform.

Change-Id: I11bacaf436a1178fee13169f8f65214011044783
Reviewed-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit b329f95d70f3f955093e9a2b18ac1ed3587a8f73)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

ARM: 8478/2: arm/arm64: add arm-smccc

Adds helpers to do SMC and HVC based on ARM SMC Calling Convention.
CONFIG_HAVE_ARM_SMCCC is enabled for architectures that may support the
SMC or HVC instruction. It's the responsibility of the caller to know if
the SMC instruction is supported by the platform.

This patch doesn't provide an implementation of the declared functions.
Later patches will bring in implementations and set
CONFIG_HAVE_ARM_SMCCC for ARM and ARM64 respectively.

Change-Id: I36d7927543c5bbb5313417e93e45fec1fb9997af
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 98dd64f34f47ce19b388d9015f767f48393a81eb)
Signed-off-by: Victor Chong <victor.chong@linaro.org>

UPSTREAM: net: xfrm: allow clearing socket xfrm policies.

Currently it is possible to add or update socket policies, but
not clear them. Therefore, once a socket policy has been applied,
the socket cannot be used for unencrypted traffic.

This patch allows (privileged) users to clear socket policies by
passing in a NULL pointer and zero length argument to the
{IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both
the incoming and outgoing policies being cleared.

The simple approach taken in this patch cannot clear socket
policies in only one direction. If desired this could be added
in the future, for example by continuing to pass in a length of
zero (which currently is guaranteed to return EMSGSIZE) and
making the policy be a pointer to an integer that contains one
of the XFRM_POLICY_{IN,OUT} enum values.

An alternative would have been to interpret the length as a
signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the
input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output
policy.

Bug: 65857891
Tested: https://android-review.googlesource.com/539816
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Merge 4.4.103 into android-4.4

Changes in 4.4.103
s390: fix transactional execution control register handling
s390/runtime instrumention: fix possible memory corruption
s390/disassembler: add missing end marker for e7 table
s390/disassembler: increase show_code buffer size
ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
AF_VSOCK: Shrink the area influenced by prepare_to_wait
vsock: use new wait API for vsock_stream_sendmsg()
sched: Make resched_cpu() unconditional
lib/mpi: call cond_resched() from mpi_powm() loop
x86/decoder: Add new TEST instruction pattern
ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
MIPS: ralink: Fix MT7628 pinmux
MIPS: ralink: Fix typo in mt7628 pinmux function
ALSA: hda: Add Raven PCI ID
dm bufio: fix integer overflow when limiting maximum cache size
dm: fix race between dm_get_from_kobject() and __dm_destroy()
MIPS: Fix an n32 core file generation regset support regression
MIPS: BCM47XX: Fix LED inversion for WRT54GSv1
autofs: don't fail mount for transient error
nilfs2: fix race condition that causes file system corruption
eCryptfs: use after free in ecryptfs_release_messaging()
bcache: check ca->alloc_thread initialized before wake up it
isofs: fix timestamps beyond 2027
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
nfsd: deal with revoked delegations appropriately
rtlwifi: rtl8192ee: Fix memory leak when loading firmware
rtlwifi: fix uninitialized rtlhal->last_suspend_sec time
ata: fixes kernel crash while tracing ata_eh_link_autopsy event
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ALSA: pcm: update tstamp only if audio_tstamp changed
ALSA: usb-audio: Add sanity checks to FE parser
ALSA: usb-audio: Fix potential out-of-bound access at parsing SU
ALSA: usb-audio: Add sanity checks in v2 clock parsers
ALSA: timer: Remove kernel warning at compat ioctl error paths
ALSA: hda/realtek - Fix ALC700 family no sound issue
fix a page leak in vhost_scsi_iov_to_sgl() error recovery
fs/9p: Compare qid.path in v9fs_test_inode
iscsi-target: Fix non-immediate TMR reference leak
target: Fix QUEUE_FULL + SCSI task attribute handling
KVM: nVMX: set IDTR and GDTR limits when loading L1 host state
KVM: SVM: obey guest PAT
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
clk: ti: dra7-atl-clock: Fix of_node reference counting
clk: ti: dra7-atl-clock: fix child-node lookups
libnvdimm, namespace: fix label initialization to use valid seq numbers
libnvdimm, namespace: make 'resource' attribute only readable by root
IB/srpt: Do not accept invalid initiator port names
IB/srp: Avoid that a cable pull can trigger a kernel crash
NFC: fix device-allocation error return
i40e: Use smp_rmb rather than read_barrier_depends
igb: Use smp_rmb rather than read_barrier_depends
igbvf: Use smp_rmb rather than read_barrier_depends
ixgbevf: Use smp_rmb rather than read_barrier_depends
i40evf: Use smp_rmb rather than read_barrier_depends
fm10k: Use smp_rmb rather than read_barrier_depends
ixgbe: Fix skb list corruption on Power systems
parisc: Fix validity check of pointer size argument in new CAS implementation
powerpc/signal: Properly handle return value from uprobe_deny_signal()
media: Don't do DMA on stack for firmware upload in the AS102 driver
media: rc: check for integer overflow
cx231xx-cards: fix NULL-deref on missing association descriptor
media: v4l2-ctrl: Fix flags field on Control events
sched/rt: Simplify the IPI based RT balancing logic
fscrypt: lock mutex before checking for bounce page pool
net/9p: Switch to wait_event_killable()
PM / OPP: Add missing of_node_put(np)
e1000e: Fix error path in link detection
e1000e: Fix return value test
e1000e: Separate signaling for link check/link up
RDS: RDMA: return appropriate error on rdma map failures
PCI: Apply _HPX settings only to relevant devices
dmaengine: zx: set DMA_CYCLIC cap_mask bit
net: Allow IP_MULTICAST_IF to set index to L3 slave
net: 3com: typhoon: typhoon_init_one: make return values more specific
net: 3com: typhoon: typhoon_init_one: fix incorrect return values
drm/armada: Fix compile fail
ath10k: fix incorrect txpower set by P2P_DEVICE interface
ath10k: ignore configuring the incorrect board_id
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
ath10k: set CTS protection VDEV param only if VDEV is up
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
drm: Apply range restriction after color adjustment when allocation
mac80211: Remove invalid flag operations in mesh TSF synchronization
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
iio: light: fix improper return value
staging: iio: cdc: fix improper return value
spi: SPI_FSL_DSPI should depend on HAS_DMA
netfilter: nft_queue: use raw_smp_processor_id()
netfilter: nf_tables: fix oob access
ASoC: rsnd: don't double free kctrl
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
s390/kbuild: enable modversions for symbols exported from asm
xen: xenbus driver must not accept invalid transaction ids
Revert "sctp: do not peel off an assoc from one netns to another one"
Linux 4.4.103

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.4.103

Revert "sctp: do not peel off an assoc from one netns to another one"

This reverts commit 2a0e60907e54dad75e9b3568d02bec11d6e74f6b which is
commit df80cd9b28b9ebaa284a41df611dbf3a2d05ca74 upstream as I messed up
by applying it to the tree twice.

Reported-by: Michal Kubecek <mkubecek@suse.cz>
Cc: ChunYu Wang <chunwang@redhat.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: xenbus driver must not accept invalid transaction ids

[ Upstream commit 639b08810d6ad74ded2c5f6e233c4fcb9d147168 ]

When accessing Xenstore in a transaction the user is specifying a
transaction id which he normally obtained from Xenstore when starting
the transaction. Xenstore is validating a transaction id against all
known transaction ids of the connection the request came in. As all
requests of a domain not being the one where Xenstore lives share
one connection, validation of transaction ids of different users of
Xenstore in that domain should be done by the kernel of that domain
being the multiplexer between the Xenstore users in that domain and
Xenstore.

In order to prohibit one Xenstore user "hijacking" a transaction from
another user the xenbus driver has to verify a given transaction id
against all known transaction ids of the user before forwarding it to
Xenstore.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kbuild: enable modversions for symbols exported from asm

[ Upstream commit cabab3f9f5ca077535080b3252e6168935b914af ]

s390 version of commit 334bb7738764 ("x86/kbuild: enable modversions
for symbols exported from asm") so we get also rid of all these
warnings:

WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memcpy" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memmove" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "save_fpu_regs" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie64a" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie_exit" [vmlinux] version generation failed, symbol will not be versioned.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data

[ Upstream commit 1cab2a84f470e15ecc8e5143bfe9398c6e888032 ]

Protect against corrupt firmware files by ensuring that the length we
get for the data in a region actually lies within the available firmware
file data buffer.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: return the actual error value from from btrfs_uuid_tree_iterate

[ Upstream commit 73ba39ab9307340dc98ec3622891314bbc09cc2e ]

In function btrfs_uuid_tree_iterate(), errno is assigned to variable ret
on errors. However, it directly returns 0. It may be better to return
ret. This patch also removes the warning, because the caller already
prints a warning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188731
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
[ edited subject ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: don't double free kctrl

[ Upstream commit 0ea617a298dcdc2251b4e10f83ac3f3e627b66e3 ]

On an error, snd_ctl_add already free's kctrl, so calling snd_ctl_free_one
to free it again leads to a double free error.  Fix this by removing
the extraneous snd_ctl_free_one call.

Issue found using static analysis with CoverityScan, CID 1372908

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix oob access

[ Upstream commit 3e38df136e453aa69eb4472108ebce2fb00b1ba6 ]

BUG: KASAN: slab-out-of-bounds in nf_tables_rule_destroy+0xf1/0x130 at addr ffff88006a4c35c8
Read of size 8 by task nft/1607

When we've destroyed last valid expr, nft_expr_next() returns an invalid expr.
We must not dereference it unless it passes != nft_expr_last() check.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_queue: use raw_smp_processor_id()

[ Upstream commit c2e756ff9e699865d294cdc112acfc36419cf5cc ]

Using smp_processor_id() causes splats with PREEMPT_RCU:

[19379.552780] BUG: using smp_processor_id() in preemptible [00000000] code: ping/32389
[19379.552793] caller is debug_smp_processor_id+0x17/0x19
[...]
[19379.552823] Call Trace:
[19379.552832]  [<ffffffff81274e9e>] dump_stack+0x67/0x90
[19379.552837]  [<ffffffff8129a4d4>] check_preemption_disabled+0xe5/0xf5
[19379.552842]  [<ffffffff8129a4fb>] debug_smp_processor_id+0x17/0x19
[19379.552849]  [<ffffffffa07c42dd>] nft_queue_eval+0x35/0x20c [nft_queue]

No need to disable preemption since we only fetch the numeric value, so
let's use raw_smp_processor_id() instead.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: SPI_FSL_DSPI should depend on HAS_DMA

[ Upstream commit dadab2d4e3cf708ceba22ecddd94aedfecb39199 ]

If NO_DMA=y:

    ERROR: "bad_dma_ops" [drivers/spi/spi-fsl-dspi.ko] undefined!

Add a dependency on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>