OSDN Git Service
Alex Bennée [Fri, 6 Apr 2018 21:08:36 +0000 (22:08 +0100)]
tests/Makefile.include: add [build|clean|check]-tcg targets
This will ensure all linux-user targets build their guest test
programs and ensure check-tcg will run the respective tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 6 Apr 2018 10:08:37 +0000 (11:08 +0100)]
Makefile.target: add (clean-/build-)guest-tests targets
Now all the build infrastructure is in place we can build tests for
each guest that we support. That support mainly depends on having
cross compilers installed or docker setup. To keep all the logic for
that together we put the rules in tests/tcg/Makefile.include and
include it from the main Makefile.target.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 6 Apr 2018 12:32:18 +0000 (13:32 +0100)]
tests/tcg/Makefile: update to be called from Makefile.target
This make is now invoked from each individual target make with the
appropriate CC and EXTRA_CFLAGS set for each guest. It then includes
additional Makefile.targets from:
- tests/tcg/multiarch (always)
- tests/tcg/$(TARGET_BASE_ARCH) (if available)
- tests/tcg/$(TARGET_NAME)
The order is important as the later Makefile's may want to suppress
TESTS from its base arch profile. Each included Makefile.target is
responsible for adding TESTS as well as defining any special build
instructions for individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Thu, 24 May 2018 21:28:45 +0000 (22:28 +0100)]
tests/tcg: enable building for PowerPC
Now we have restored debian-image-powerpc-cross using Debian SID
compilers we can build for 32 bit powerpc. Although PPC32 supports a
range of pages sizes currently only 4k works so the others are
commented out for now.
We can also merge the ppc64 support under the base architecture
directory to avoid too much proliferation of directories.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Thu, 24 May 2018 21:12:15 +0000 (22:12 +0100)]
docker: move debian-powerpc-cross to sid based build
The original Jessie based cross builder hasn't worked for a while. The
state of the libraries is still perilous for cross-building QEMU but
we can use it for building TCG tests.
The debian-apt-fake.sh script can also be dropped as it is no longer
used.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Tue, 24 Apr 2018 15:41:18 +0000 (16:41 +0100)]
tests/tcg: enable building for RISCV64
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 23 Apr 2018 15:57:48 +0000 (16:57 +0100)]
tests/tcg: enable building for mips64
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 23 Apr 2018 15:49:09 +0000 (16:49 +0100)]
tests/tcg: enable building for sparc64
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 23 Apr 2018 15:25:06 +0000 (16:25 +0100)]
tests/tcg: enable building for sh4
As before, using Debian SID compilers. While the compiler can be
coerced into generating big-endian code it seems the linker can't deal
with it so we only enable the building for little endian SH4.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 23 Apr 2018 15:08:36 +0000 (16:08 +0100)]
tests/tcg: enable building for m68k
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 23 Apr 2018 15:00:13 +0000 (16:00 +0100)]
tests/tcg: enable building for HPPA
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 23 Apr 2018 14:48:06 +0000 (15:48 +0100)]
tests/tcg/alpha: add Alpha specific tests
These tests did use their own crt.o stub however that is a little
stone age so we drop crt.S and just statically link to the cross
compilers libraries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 23 Apr 2018 12:54:09 +0000 (13:54 +0100)]
tests/tcg: enable building for Alpha
We can't use our normal Debian based compilers as Alpha isn't an
officially supported architecture. However it is available as a port
and fortunately cross compilers for all these targets are included in
Debian Sid, the perpetual rolling/unstable/testing version of Debian.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Tue, 10 Apr 2018 16:45:56 +0000 (17:45 +0100)]
tests/tcg: enable building for ppc64
Currently this just enables building the multiarch tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 6 Apr 2018 20:43:57 +0000 (21:43 +0100)]
tests/tcg: enable building for s390x
This doesn't add any additional tests but enables building the
multiarch tests for s390x.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Alex Bennée [Tue, 17 Apr 2018 10:31:02 +0000 (11:31 +0100)]
tests/tcg/mips: include common mips hello-mips
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Mon, 11 Jun 2018 10:17:13 +0000 (11:17 +0100)]
tests/docker/Makefile.include: fix mipsel-cross dependancy
This got broken in commit
4319db7 but generally only shows up when you
try and do massive parallel builds on fresh machines.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Tue, 17 Apr 2018 13:55:17 +0000 (14:55 +0100)]
tests/tcg: enable building for MIPS
This doesn't add any additional tests but enables building the
multiarch tests for MIPS using docker cross compilers. We don't have a
cross compiler for mips64 big endian though.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Thu, 5 Apr 2018 14:50:08 +0000 (15:50 +0100)]
tests/tcg: move MIPS specific tests into subdir
These only need to be built for MIPS guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 13 Apr 2018 16:08:26 +0000 (17:08 +0100)]
tests/tcg/arm: add fcvt test cases for AArch32/64
This runs through the usual float to float conversions and crucially
also runs with ARM Alternative Half Precision Format.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Wed, 9 May 2018 09:31:30 +0000 (10:31 +0100)]
tests/tcg: enable building for AArch64
We only have compilers for the (default) little endian variants.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 13 Apr 2018 13:56:17 +0000 (14:56 +0100)]
tests/tcg/arm: fix up test-arm-iwmmxt test
We need to rename the source file to a .S so we can do a single-line
assemble and link invocation. We also specify the additional CFLAGS
for the compile as it's a non-standard ARM binary.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[rth: force fpu configuration]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Mon, 7 May 2018 20:53:43 +0000 (21:53 +0100)]
tests/tcg: enable building for ARM
This allows us to use the docker cross compiler image to build these
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Thu, 5 Apr 2018 14:45:32 +0000 (15:45 +0100)]
tests/tcg: move ARM specific tests into subdir
These only need to be built for ARM guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Fri, 13 Apr 2018 16:17:37 +0000 (17:17 +0100)]
tests/tcg/i386/test-i386: fix printf format
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 13 Apr 2018 16:16:00 +0000 (17:16 +0100)]
tests/tcg/i386/test-i386: use modern vector_size attributes
The compiler complains about the old __mode__ style attributes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Tue, 17 Apr 2018 10:14:37 +0000 (11:14 +0100)]
tests/tcg/x86_64: add Makefile.target
The sources for x86_64 are shared in the i386 directory which will be
included thanks to TARGET_BASE_ARCH. However not all sources build so
we need to filter out the ones we can't build in the 64 bit world and
those that can't be built for 32 bit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Tue, 10 Apr 2018 14:23:29 +0000 (15:23 +0100)]
tests/tcg/i386: add runner for test-i386-fprem
The runner needs to compare against a reference run. We also only run
this test when SPEED=slow as it takes a while.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Tue, 10 Apr 2018 14:16:45 +0000 (15:16 +0100)]
tests/tcg/i386: fix test-i386
We don't include anything from qemu itself for the build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fam Zheng [Fri, 8 Sep 2017 09:16:57 +0000 (17:16 +0800)]
tests/tcg/i386: Build fix for hello-i386
We have -Werror=missing-prototype, add a dummy prototype to avoid that
warning.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Tue, 17 Apr 2018 13:56:39 +0000 (14:56 +0100)]
tests/tcg: enable building for i386
While you can construct a compile command that does work using the
x86_64 host compiler that most people use this is flakey. Different
distros handle this is different ways so we default to using a known
good i386 compiler via docker.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Thu, 5 Apr 2018 14:35:11 +0000 (15:35 +0100)]
tests/tcg: move i386 specific tests into subdir
These only need to be built for i386 guests. This includes a stub
tests/tcg/i386/Makfile.target which absorbs some of what was in
tests/tcg/Makefile.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Tue, 24 Apr 2018 13:00:46 +0000 (14:00 +0100)]
tests/tcg/multiarch: move most output to stdout
The default test run outputs to stdout so it can be re-directed.
Errors are still reported to stderr.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Alex Bennée [Fri, 8 Jun 2018 19:15:03 +0000 (20:15 +0100)]
tests/tcg/multiarch: don't hard code paths/ports for linux-test
The fixed path and ports get in the way of running our tests and
builds in parallel. Instead of using TESTPATH we use mkdtemp() and
instead of a fixed port we allow the kernel to assign one and query it
afterwards.
Ideally test directory creation should be common functionally across
all TCG tests but this could complicate an already huge patch series
so we mark it as a TODO for next time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Thu, 19 Apr 2018 13:02:04 +0000 (14:02 +0100)]
tests/tcg/multiarch: enable additional linux-test tests
Un-comment the remaining tests.
I removed the itimer value tests because I'm fairly sure a re-arming
timer will always have a different value in it when you grab it.
I've also fixed up the clone thread flags as QEMU will only allow a
clone to use flags which match glibc. However the test is still racey
so it remains disabled by default - it can be run by passing any
additional parameters on the command line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fam Zheng [Fri, 8 Sep 2017 09:16:58 +0000 (17:16 +0800)]
tests/tcg/multiarch: Build fix for linux-test
To keep the compiler happy, and to fit in our buildsys flags:
- Make local functions "static"
- #ifdef out unused functions
- drop cutils/osdep dependencies
Signed-off-by: Fam Zheng <famz@redhat.com>
[AJB: drop cutils/osdep dependencies]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Thu, 5 Apr 2018 14:03:22 +0000 (15:03 +0100)]
tests/tcg: move architecture independent tests into subdir
We will want to build these for all supported guest architectures so
lets move them all into one place. We also drop test_path at this
point because it needs qemu utils and glib bits which is hard to
support for cross compiling.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Fri, 6 Apr 2018 15:25:39 +0000 (16:25 +0100)]
docker: Makefile.include introduce DOCKER_SCRIPT
Define this in one place to make it easy to re-use.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 6 Apr 2018 15:23:26 +0000 (16:23 +0100)]
docker: allow "cc" command to run in user context
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Thu, 12 Apr 2018 16:18:12 +0000 (17:18 +0100)]
docker: extend "cc" command to accept compiler
When calling our cross-compilation images we want to call something
other than the default cc.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Alex Bennée [Thu, 12 Apr 2018 15:49:11 +0000 (16:49 +0100)]
docker: Add "cc" subcommand
Signed-off-by: Fam Zheng <famz@redhat.com>
[AJB: add if args.paths check]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alex Bennée [Fri, 13 Apr 2018 15:15:07 +0000 (16:15 +0100)]
configure: set cross_cc_FOO for host compiler
We can build tests for the host system with the compiler that we have
selected.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Fri, 13 Apr 2018 10:07:58 +0000 (11:07 +0100)]
configure: allow user to specify --cross-cc-cflags-foo=
As an individual compiler may be able to support several targets with
the appropriate flags we need to expose this to the user as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Tue, 10 Apr 2018 11:19:40 +0000 (12:19 +0100)]
configure: move i386_cc to cross_cc_i386
Also dont assume x86_64 compiler can build i386 binaries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Wed, 4 Apr 2018 19:27:05 +0000 (20:27 +0100)]
configure: add support for --cross-cc-FOO
This allows us to specify cross compilers for our guests. This is
useful for building test images/programs. Currently we re-run the
compile test for each target. I couldn't think of a way to cache the
value for a given arch without getting messier configure code.
The cross compiler for the guest is visible to each target as
CROSS_CC_GUEST in config-target.mak. This is quoted to handle the case
of --cc="ccache gcc".
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alex Bennée [Wed, 20 Jun 2018 14:45:42 +0000 (15:45 +0100)]
docker: docker.py wrap StringIO import for python3
Although the docker.py is nominally python2 we actually invoke it with
the configured python from the configure script.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Peter Maydell [Wed, 20 Jun 2018 08:51:30 +0000 (09:51 +0100)]
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-
20180619' into staging
- cleanup in virtio-ccw
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
# gpg: Signature made Tue 19 Jun 2018 10:33:06 BST
# gpg: using RSA key
DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-
20180619:
pc-bios/s390-ccw: Update the s390-netboot.img binary
pc-bios/s390-ccw: Optimize the s390-netboot.img for size
pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
pc-bios/s390-ccw/net: Add support for pxelinux-style config files
pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
roms: Update SLOF submodule to current status
pc-bios/s390-ccw: define loadparm length
s390x/cpumodels: add z14 Model ZR1
s390x/ipl: Try to detect Linux vs non Linux for initial IPL PSW
vfio-ccw: remove orb.c64 (64 bit data addresses) check
vfio-ccw: add force unlimited prefetch property
virtio-ccw: clean up notify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 17:29:16 +0000 (18:29 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-
20180618' into staging
qemu-openbios queue
# gpg: Signature made Mon 18 Jun 2018 19:28:08 BST
# gpg: using RSA key
5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-
20180618:
Update OpenBIOS images to
8fe6f5f96f built from submodule.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 16:42:50 +0000 (17:42 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-
20180618' into staging
qemu-sparc queue
# gpg: Signature made Mon 18 Jun 2018 18:43:24 BST
# gpg: using RSA key
5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-
20180618:
SPARC64: add icount support
hw/sparc/sun4m: Fix problems with device introspection
hw/sparc64/sun4u: Fix introspection by converting prom instance_init to realize
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 15:57:43 +0000 (16:57 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-axp-
20180618' into staging
Place parallel device properly, fixing vga
# gpg: Signature made Mon 18 Jun 2018 17:45:50 BST
# gpg: using RSA key
64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-axp-
20180618:
hw/isa/smc37c669: Change the parallel I/O base to 378H
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 15:04:43 +0000 (16:04 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Active mirror (blockdev-mirror copy-mode=write-blocking)
- bdrv_drain_*() fixes and test cases
- Fix crash with scsi-hd and drive_del
# gpg: Signature made Mon 18 Jun 2018 17:44:10 BST
# gpg: using RSA key
7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (35 commits)
iotests: Add test for active mirroring
block/mirror: Add copy mode QAPI interface
block/mirror: Add active mirroring
job: Add job_progress_increase_remaining()
block/mirror: Add MirrorBDSOpaque
block/dirty-bitmap: Add bdrv_dirty_iter_next_area
test-hbitmap: Add non-advancing iter_next tests
hbitmap: Add @advance param to hbitmap_iter_next()
block: Generalize should_update_child() rule
block/mirror: Use source as a BdrvChild
block/mirror: Wait for in-flight op conflicts
block/mirror: Use CoQueue to wait on in-flight ops
block/mirror: Convert to coroutines
block/mirror: Pull out mirror_perform()
block: fix QEMU crash with scsi-hd and drive_del
test-bdrv-drain: Test graph changes in drain_all section
block: Allow graph changes in bdrv_drain_all_begin/end sections
block: ignore_bds_parents parameter for drain functions
block: Move bdrv_drain_all_begin() out of coroutine context
block: Allow AIO_WAIT_WHILE with NULL ctx
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 14:19:07 +0000 (15:19 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-06-18' into staging
Monitor patches for 2018-06-18
# gpg: Signature made Mon 18 Jun 2018 14:50:29 BST
# gpg: using RSA key
3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-monitor-2018-06-18:
monitor: add lock to protect mon_fdsets
monitor: move init global earlier
monitor: remove event_clock_type
monitor: fix comment for monitor_lock
monitor: more comments on lock-free elements
monitor: protect mon->fds with mon_lock
monitor: rename out_lock to mon_lock
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 13:34:06 +0000 (14:34 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/input-
20180618-pull-request' into staging
input: ps2 post_load fix.
# gpg: Signature made Mon 18 Jun 2018 11:18:30 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/input-
20180618-pull-request:
ps2: check PS2Queue wptr pointer in post_load routine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 12:43:35 +0000 (13:43 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/vga-
20180618-pull-request' into staging
vga: add ramfb, print virglrenderer version
# gpg: Signature made Mon 18 Jun 2018 10:57:38 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/vga-
20180618-pull-request:
Add ramfb MAINTAINERS entry
hw/display: add standalone ramfb device
hw/display: add ramfb, a simple boot framebuffer living in guest ram
configure: print virglrenderer version
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 11:58:06 +0000 (12:58 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/usb-
20180618-pull-request' into staging
usb: revert ccid / qom patches.
# gpg: Signature made Mon 18 Jun 2018 10:21:11 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-
20180618-pull-request:
Revert "bus: do not unref the added child bus on realize"
Revert "usb: release the created buses"
Revert "usb-ccid: fix bus leak"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 10:15:27 +0000 (11:15 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-
20180618' into staging
ppc patch queue 2018-06-18
Next batch of ppc and spapr related patches for the 3.0 release.
* Improved handling of Spectre/Meltdown mitigations for POWER8
* Numerous Mac machine type cleanups and improvements
* Cleanup to cpu realize/unrealize path for spapr
* Create a place for machine-specific per-cpu information, and
start moving some things to it
* Assorted bugfixes
# gpg: Signature made Mon 18 Jun 2018 04:52:37 BST
# gpg: using RSA key
6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-
20180618: (28 commits)
spapr: fix xics_system_init() error path
target/ppc, spapr: Move VPA information to machine_data
ppc/pnv: introduce a pnv_chip_core_realize() routine
spapr_cpu_core: introduce spapr_create_vcpu()
spapr_cpu_core: add missing rollback on realization path
spapr_cpu_core: fix potential leak in spapr_cpu_core_realize()
spapr_cpu_core: convert last snprintf() to g_strdup_printf()
pnv: Add cpu unrealize path
pnv: Clean up cpu realize path
pnv_core: Allocate cpu thread objects individually
pnv: Fix some error handling cpu realize()
spapr: Clean up cpu realize/unrealize paths
sm501: Do not clear read only bits when writing registers
mos6522: expose mos6522_update_irq() through MOS6522DeviceClass
mos6522: remove additional interrupt flag filter from mos6522_update_irq()
mos6522: only clear the shift register interrupt upon write
xics_kvm: fix a build break
mac_newworld: add PMU device
adb: add property to disable direct reg 3 writes
adb: fix read reg 3 byte ordering
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 Jun 2018 09:10:40 +0000 (10:10 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2018-06-15
* Add avocado_qemu: functional/acceptance test infrastructure
# gpg: Signature made Fri 15 Jun 2018 20:12:20 BST
# gpg: using RSA key
2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
configure: Enable out-of-tree acceptance tests
Acceptance tests: add Linux kernel boot and console checking test
scripts/qemu.py: introduce set_console() method
Acceptance tests: add quick VNC tests
scripts/qemu.py: allow adding to the list of extra arguments
Add functional/acceptance tests infrastructure
Remove COPYING.PYTHON
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Mon, 18 Jun 2018 18:21:43 +0000 (19:21 +0100)]
Update OpenBIOS images to
8fe6f5f96f built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Kevin Wolf [Mon, 18 Jun 2018 15:20:41 +0000 (17:20 +0200)]
Merge remote-tracking branch 'mreitz/tags/pull-block-2018-06-18' into queue-block
Block patches:
- Active mirror (blockdev-mirror copy-mode=write-blocking)
# gpg: Signature made Mon Jun 18 17:08:19 2018 CEST
# gpg: using RSA key
F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2018-06-18:
iotests: Add test for active mirroring
block/mirror: Add copy mode QAPI interface
block/mirror: Add active mirroring
job: Add job_progress_increase_remaining()
block/mirror: Add MirrorBDSOpaque
block/dirty-bitmap: Add bdrv_dirty_iter_next_area
test-hbitmap: Add non-advancing iter_next tests
hbitmap: Add @advance param to hbitmap_iter_next()
block: Generalize should_update_child() rule
block/mirror: Use source as a BdrvChild
block/mirror: Wait for in-flight op conflicts
block/mirror: Use CoQueue to wait on in-flight ops
block/mirror: Convert to coroutines
block/mirror: Pull out mirror_perform()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cornelia Huck [Mon, 18 Jun 2018 15:05:27 +0000 (17:05 +0200)]
Merge tag 'tags/s390x-2018-06-18' into staging
Add support for pxelinux.cfg-style network booting to the s390x firmware
# gpg: Signature made Mon 18 Jun 2018 03:59:06 PM CEST
# gpg: using RSA key
2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
* tag 'tags/s390x-2018-06-18':
pc-bios/s390-ccw: Update the s390-netboot.img binary
pc-bios/s390-ccw: Optimize the s390-netboot.img for size
pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
pc-bios/s390-ccw/net: Add support for pxelinux-style config files
pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
roms: Update SLOF submodule to current status
pc-bios/s390-ccw: define loadparm length
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:23 +0000 (20:18 +0200)]
iotests: Add test for active mirroring
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id:
20180613181823.13618-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:22 +0000 (20:18 +0200)]
block/mirror: Add copy mode QAPI interface
This patch allows the user to specify whether to use active or only
background mode for mirror block jobs. Currently, this setting will
remain constant for the duration of the entire block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id:
20180613181823.13618-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:21 +0000 (20:18 +0200)]
block/mirror: Add active mirroring
This patch implements active synchronous mirroring. In active mode, the
passive mechanism will still be in place and is used to copy all
initially dirty clusters off the source disk; but every write request
will write data both to the source and the target disk, so the source
cannot be dirtied faster than data is mirrored to the target. Also,
once the block job has converged (BLOCK_JOB_READY sent), source and
target are guaranteed to stay in sync (unless an error occurs).
Active mode is completely optional and currently disabled at runtime. A
later patch will add a way for users to enable it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
20180613181823.13618-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:20 +0000 (20:18 +0200)]
job: Add job_progress_increase_remaining()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20180613181823.13618-12-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:19 +0000 (20:18 +0200)]
block/mirror: Add MirrorBDSOpaque
This will allow us to access the block job data when the mirror block
driver becomes more complex.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
20180613181823.13618-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:18 +0000 (20:18 +0200)]
block/dirty-bitmap: Add bdrv_dirty_iter_next_area
This new function allows to look for a consecutively dirty area in a
dirty bitmap.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id:
20180613181823.13618-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:17 +0000 (20:18 +0200)]
test-hbitmap: Add non-advancing iter_next tests
Add a function that wraps hbitmap_iter_next() and always calls it in
non-advancing mode first, and in advancing mode next. The result should
always be the same.
By using this function everywhere we called hbitmap_iter_next() before,
we should get good test coverage for non-advancing hbitmap_iter_next().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id:
20180613181823.13618-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:16 +0000 (20:18 +0200)]
hbitmap: Add @advance param to hbitmap_iter_next()
This new parameter allows the caller to just query the next dirty
position without moving the iterator.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id:
20180613181823.13618-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:15 +0000 (20:18 +0200)]
block: Generalize should_update_child() rule
Currently, bdrv_replace_node() refuses to create loops from one BDS to
itself if the BDS to be replaced is the backing node of the BDS to
replace it: Say there is a node A and a node B. Replacing B by A means
making all references to B point to A. If B is a child of A (i.e. A has
a reference to B), that would mean we would have to make this reference
point to A itself -- so we'd create a loop.
bdrv_replace_node() (through should_update_child()) refuses to do so if
B is the backing node of A. There is no reason why we should create
loops if B is not the backing node of A, though. The BDS graph should
never contain loops, so we should always refuse to create them.
If B is a child of A and B is to be replaced by A, we should simply
leave B in place there because it is the most sensible choice.
A more specific argument would be: Putting filter drivers into the BDS
graph is basically the same as appending an overlay to a backing chain.
But the main child BDS of a filter driver is not "backing" but "file",
so restricting the no-loop rule to backing nodes would fail here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id:
20180613181823.13618-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:14 +0000 (20:18 +0200)]
block/mirror: Use source as a BdrvChild
With this, the mirror_top_bs is no longer just a technically required
node in the BDS graph but actually represents the block job operation.
Also, drop MirrorBlockJob.source, as we can reach it through
mirror_top_bs->backing.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id:
20180613181823.13618-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:13 +0000 (20:18 +0200)]
block/mirror: Wait for in-flight op conflicts
This patch makes the mirror code differentiate between simply waiting
for any operation to complete (mirror_wait_for_free_in_flight_slot())
and specifically waiting for all operations touching a certain range of
the virtual disk to complete (mirror_wait_on_conflicts()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
20180613181823.13618-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:12 +0000 (20:18 +0200)]
block/mirror: Use CoQueue to wait on in-flight ops
Attach a CoQueue to each in-flight operation so if we need to wait for
any we can use it to wait instead of just blindly yielding and hoping
for some operation to wake us.
A later patch will use this infrastructure to allow requests accessing
the same area of the virtual disk to specifically wait for each other.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
20180613181823.13618-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:11 +0000 (20:18 +0200)]
block/mirror: Convert to coroutines
In order to talk to the source BDS (and maybe in the future to the
target BDS as well) directly, we need to convert our existing AIO
requests into coroutine I/O requests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
20180613181823.13618-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 13 Jun 2018 18:18:10 +0000 (20:18 +0200)]
block/mirror: Pull out mirror_perform()
When converting mirror's I/O to coroutines, we are going to need a point
where these coroutines are created. mirror_perform() is going to be
that point.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id:
20180613181823.13618-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Peter Xu [Fri, 8 Jun 2018 03:55:11 +0000 (11:55 +0800)]
monitor: add lock to protect mon_fdsets
Introduce a new global big lock for mon_fdsets. Take it where needed.
The monitor_fdset_get_fd() handling is a bit tricky: now we need to call
qemu_mutex_unlock() which might pollute errno, so we need to make sure
the correct errno be passed up to the callers. To make things simpler,
we let monitor_fdset_get_fd() return the -errno directly when error
happens, then in qemu_open() we move it back into errno.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20180608035511.7439-8-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Fri, 8 Jun 2018 03:55:10 +0000 (11:55 +0800)]
monitor: move init global earlier
Before this patch, monitor fd helpers might be called even earlier than
monitor_init_globals(). This can be problematic.
After previous work, now monitor_init_globals() does not depend on
accelerator initialization any more. Call it earlier (before CLI
parsing; that's where the monitor APIs might be called) to make sure it
is called before any of the monitor APIs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20180608035511.7439-7-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Fri, 8 Jun 2018 03:55:09 +0000 (11:55 +0800)]
monitor: remove event_clock_type
Instead, use a dynamic function to detect which clock we'll use. The
problem is that the old code will let monitor initialization depend on
configure_accelerator() (that's where qtest_enabled() start to take
effect). After this change, we don't have such a dependency any more.
We just need to make sure configure_accelerator() is called when we
start to use it. Now it's only used in monitor_qapi_event_queue() and
monitor_qapi_event_handler(), so we're good.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20180608035511.7439-6-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[monitor_get_event_clock() name and comment tweaked]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Fri, 8 Jun 2018 03:55:08 +0000 (11:55 +0800)]
monitor: fix comment for monitor_lock
Fix typo in
d622cb5879c. Meanwhile move these variables close to each
other. monitor_qapi_event_state can be declared static, add that.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20180608035511.7439-5-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Fri, 8 Jun 2018 03:55:07 +0000 (11:55 +0800)]
monitor: more comments on lock-free elements
Add some explicit comments for both Readline and cpu_set/cpu_get helpers
that they do not need the mon_lock protection.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20180608035511.7439-4-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Fri, 8 Jun 2018 03:55:06 +0000 (11:55 +0800)]
monitor: protect mon->fds with mon_lock
mon->fds were protected by BQL. Now protect it by mon_lock so that it
can even be used in monitor iothread.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20180608035511.7439-3-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Fri, 8 Jun 2018 03:55:05 +0000 (11:55 +0800)]
monitor: rename out_lock to mon_lock
The out_lock is protecting a few Monitor fields. In the future the
monitor code will start to run in multiple threads. We are going to
turn it into a bigger lock to protect not only the out buffer but also
most of the rest.
Since at it, rearrange the Monitor struct a bit.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20180608035511.7439-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Thomas Huth [Mon, 18 Jun 2018 13:24:44 +0000 (15:24 +0200)]
pc-bios/s390-ccw: Update the s390-netboot.img binary
This binary now contains the support for pxelinux.cfg-style network
booting.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 14 Jun 2018 08:38:22 +0000 (10:38 +0200)]
pc-bios/s390-ccw: Optimize the s390-netboot.img for size
The -O2 optimization flag is passed via CFLAGS to the firmware Makefile,
but in netbook.mak, we've got some rules that only use QEMU_CFLAGS for
compiling the libc and libnet from SLOF, so these files get compiled
without optimization so far. Use CFLAGS here, too, to create faster
and smaller code.
We can additionally save some more bytes in the firmware images by compi-
ling the code with -fno-asynchronous-unwind-tables. This will omit some
ELF sections (used for stack unwinding for example) from the image that
we do not need in the firmware.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 22 May 2018 09:53:51 +0000 (11:53 +0200)]
pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
With the STSI instruction, we can get the UUID of the current VM instance,
so we can support loading pxelinux config files via UUID in the file name,
too.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 22 May 2018 09:37:29 +0000 (11:37 +0200)]
pc-bios/s390-ccw/net: Add support for pxelinux-style config files
Since it is quite cumbersome to manually create a combined kernel with
initrd image for network booting, we now support loading via pxelinux
configuration files, too. In these files, the kernel, initrd and command
line parameters can be specified seperately, and the firmware then takes
care of glueing everything together in memory after the files have been
downloaded. See this URL for details about the config file layout:
https://www.syslinux.org/wiki/index.php?title=PXELINUX
The user can either specify a config file directly as bootfile via DHCP
(but in this case, the file has to start either with "default" or a "#"
comment so we can distinguish it from binary kernels), or a folder (i.e.
the bootfile name must end with "/") where the firmware should look for
the typical pxelinux.cfg file names, e.g. based on MAC or IP address.
We also support the pxelinux.cfg DHCP options 209 and 210 from RFC 5071.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 18 May 2018 09:31:27 +0000 (11:31 +0200)]
pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
The ip_version information now has to be stored in the filename_ip_t
structure, and there is now a common function called tftp_get_error_info()
which can be used to get the error string for a TFTP error code.
We can also get rid of some superfluous "(char *)" casts now.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 5 Jun 2018 10:41:49 +0000 (12:41 +0200)]
roms: Update SLOF submodule to current status
We need the latest version of SLOF's libnet for adding pxelinux.cfg
support in the s390-ccw bios, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Collin Walling [Tue, 29 May 2018 04:40:09 +0000 (00:40 -0400)]
pc-bios/s390-ccw: define loadparm length
Loadparm is defined by the s390 architecture to be 8 bytes
in length. Let's define this size in the s390-ccw bios.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Greg Kurz [Mon, 28 May 2018 12:03:59 +0000 (14:03 +0200)]
block: fix QEMU crash with scsi-hd and drive_del
Removing a drive with drive_del while it is being used to run an I/O
intensive workload can cause QEMU to crash.
An AIO flush can yield at some point:
blk_aio_flush_entry()
blk_co_flush(blk)
bdrv_co_flush(blk->root->bs)
...
qemu_coroutine_yield()
and let the HMP command to run, free blk->root and give control
back to the AIO flush:
hmp_drive_del()
blk_remove_bs()
bdrv_root_unref_child(blk->root)
child_bs = blk->root->bs
bdrv_detach_child(blk->root)
bdrv_replace_child(blk->root, NULL)
blk->root->bs = NULL
g_free(blk->root) <============== blk->root becomes stale
bdrv_unref(child_bs)
bdrv_delete(child_bs)
bdrv_close()
bdrv_drained_begin()
bdrv_do_drained_begin()
bdrv_drain_recurse()
aio_poll()
...
qemu_coroutine_switch()
and the AIO flush completion ends up dereferencing blk->root:
blk_aio_complete()
scsi_aio_complete()
blk_get_aio_context(blk)
bs = blk_bs(blk)
ie, bs = blk->root ? blk->root->bs : NULL
^^^^^
stale
The problem is that we should avoid making block driver graph
changes while we have in-flight requests. Let's drain all I/O
for this BB before calling bdrv_root_unref_child().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 28 Mar 2018 16:29:06 +0000 (18:29 +0200)]
test-bdrv-drain: Test graph changes in drain_all section
This tests both adding and remove a node between bdrv_drain_all_begin()
and bdrv_drain_all_end(), and enabled the existing detach test for
drain_all.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 28 Mar 2018 16:29:18 +0000 (18:29 +0200)]
block: Allow graph changes in bdrv_drain_all_begin/end sections
bdrv_drain_all_*() used bdrv_next() to iterate over all root nodes and
did a subtree drain for each of them. This works fine as long as the
graph is static, but sadly, reality looks different.
If the graph changes so that root nodes are added or removed, we would
have to compensate for this. bdrv_next() returns each root node only
once even if it's the root node for multiple BlockBackends or for a
monitor-owned block driver tree, which would only complicate things.
The much easier and more obviously correct way is to fundamentally
change the way the functions work: Iterate over all BlockDriverStates,
no matter who owns them, and drain them individually. Compensation is
only necessary when a new BDS is created inside a drain_all section.
Removal of a BDS doesn't require any action because it's gone afterwards
anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 29 May 2018 15:17:45 +0000 (17:17 +0200)]
block: ignore_bds_parents parameter for drain functions
In the future, bdrv_drained_all_begin/end() will drain all invidiual
nodes separately rather than whole subtrees. This means that we don't
want to propagate the drain to all parents any more: If the parent is a
BDS, it will already be drained separately. Recursing to all parents is
unnecessary work and would make it an O(n²) operation.
Prepare the drain function for the changed drain_all by adding an
ignore_bds_parents parameter to the internal implementation that
prevents the propagation of the drain to BDS parents. We still (have to)
propagate it to non-BDS parents like BlockBackends or Jobs because those
are not drained separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 10 Apr 2018 14:07:55 +0000 (16:07 +0200)]
block: Move bdrv_drain_all_begin() out of coroutine context
Before we can introduce a single polling loop for all nodes in
bdrv_drain_all_begin(), we must make sure to run it outside of coroutine
context like we already do for bdrv_do_drained_begin().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 10 Apr 2018 13:51:52 +0000 (15:51 +0200)]
block: Allow AIO_WAIT_WHILE with NULL ctx
bdrv_drain_all() wants to have a single polling loop for draining the
in-flight requests of all nodes. This means that the AIO_WAIT_WHILE()
condition relies on activity in multiple AioContexts, which is polled
from the mainloop context. We must therefore call AIO_WAIT_WHILE() from
the mainloop thread and use the AioWait notification mechanism.
Just randomly picking the AioContext of any non-mainloop thread would
work, but instead of bothering to find such a context in the caller, we
can just as well accept NULL for ctx.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 23 Mar 2018 19:10:52 +0000 (20:10 +0100)]
test-bdrv-drain: Test that bdrv_drain_invoke() doesn't poll
This adds a test case that goes wrong if bdrv_drain_invoke() calls
aio_poll().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 23 Mar 2018 19:29:24 +0000 (20:29 +0100)]
block: Defer .bdrv_drain_begin callback to polling phase
We cannot allow aio_poll() in bdrv_drain_invoke(begin=true) until we're
done with propagating the drain through the graph and are doing the
single final BDRV_POLL_WHILE().
Just schedule the coroutine with the callback and increase bs->in_flight
to make sure that the polling phase will wait for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 23 Mar 2018 17:48:39 +0000 (18:48 +0100)]
test-bdrv-drain: Graph change through parent callback
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 23 Mar 2018 14:57:20 +0000 (15:57 +0100)]
block: Don't poll in parent drain callbacks
bdrv_do_drained_begin() is only safe if we have a single
BDRV_POLL_WHILE() after quiescing all affected nodes. We cannot allow
that parent callbacks introduce a nested polling loop that could cause
graph changes while we're traversing the graph.
Split off bdrv_do_drained_begin_quiesce(), which only quiesces a single
node without waiting for its requests to complete. These requests will
be waited for in the BDRV_POLL_WHILE() call down the call chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 23 Mar 2018 11:40:21 +0000 (12:40 +0100)]
test-bdrv-drain: Test node deletion in subtree recursion
If bdrv_do_drained_begin() polls during its subtree recursion, the graph
can change and mess up the bs->children iteration. Test that this
doesn't happen.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 23 Mar 2018 11:40:41 +0000 (12:40 +0100)]
block: Drain recursively with a single BDRV_POLL_WHILE()
Anything can happen inside BDRV_POLL_WHILE(), including graph
changes that may interfere with its callers (e.g. child list iteration
in recursive callers of bdrv_do_drained_begin).
Switch to a single BDRV_POLL_WHILE() call for the whole subtree at the
end of bdrv_do_drained_begin() to avoid such effects. The recursion
happens now inside the loop condition. As the graph can only change
between bdrv_drain_poll() calls, but not inside of it, doing the
recursion here is safe.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>