OSDN Git Service
Laszlo Ersek [Fri, 16 Jun 2017 11:22:00 +0000 (13:22 +0200)]
tests/q35-test: push down qtest_start / qtest_end to test case(s)
A test program can start up QEMU several times, with different command
lines. For such cases, qtest_start() and qtest_end() are called from
within the individual test functions. Examples: "virtio-console-test.c",
"numa-test.c", and many others.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Laszlo Ersek [Thu, 8 Jun 2017 16:10:13 +0000 (18:10 +0200)]
q35/mch: implement extended TSEG sizes
The q35 machine type currently lets the guest firmware select a 1MB, 2MB
or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even
that is not enough when a lot of VCPUs (more than approx. 224) are
configured -- SMRAM footprint scales largely proportionally with VCPU
count.
Introduce a new property for "mch" called "extended-tseg-mbytes", which
expresses (in megabytes) the user's choice of TSEG (SMRAM) size.
Invent a new, QEMU-specific register in the config space of the DRAM
Controller, at offset 0x50, in order to allow guest firmware to query the
TSEG (SMRAM) size.
According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller
Register Address Map (D0:F0)":
Warning: Address locations that are not listed are considered Intel
Reserved registers locations. Reads to Reserved registers may
return non-zero values. Writes to reserved locations may
cause system failures.
All registers that are defined in the PCI 2.3 specification,
but are not necessary or implemented in this component are
simply not included in this document. The
reserved/unimplemented space in the PCI configuration header
space is not documented as such in this summary.
Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part
of the standard PCI config space header. And they precede the capability
list as well, which starts at 0xe0 for this device.
When the guest writes value 0xffff to this register, the value that can be
read back is that of "mch.extended-tseg-mbytes" -- unless it remains
0xffff. The guest is required to write 0xffff first (as opposed to a
read-only register) because PCI config space is generally not cleared on
QEMU reset, and after S3 resume or reboot, new guest firmware running on
old QEMU could read a guest OS-injected value from this register.
After reading the available "extended" TSEG size, the guest firmware may
actually request that TSEG size by writing pattern 11b to the ESMRAMC
register's TSEG_SZ bit-field. (The Intel spec referenced above defines
only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.)
On the QEMU command line, the value can be set with
-global mch.extended-tseg-mbytes=N
The default value for 2.10+ q35 machine types is 16. The value is limited
to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be
stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users
are responsible for choosing sensible TSEG sizes.
On 2.9 and earlier q35 machine types, the default value is 0. This lets
the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50,
keep their original behavior.
When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is
set to that value on reset, for completeness.
PCI config space is migrated automatically, so no VMSD changes are
necessary.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1447027
Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Thu, 15 Jun 2017 12:45:15 +0000 (13:45 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-s390-
20170613' into staging
Queued s390 patches
# gpg: Signature made Tue 13 Jun 2017 21:22:41 BST
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-s390-
20170613:
s390x/cpumodel: wire up cpu type + id for TCG
target/s390x: rework PGM interrupt psw.addr handling
target/s390x: correctly indicate PER nullification
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 15 Jun 2017 08:43:12 +0000 (09:43 +0100)]
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/
20170614' into staging
migration/next for
20170614
# gpg: Signature made Wed 14 Jun 2017 11:16:21 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/
20170614:
migration: Don't create decompression threads if not enabled
migration: Test for disabled features on reception
migration: Remove unneeded includes
migration: fix incorrect enable return path
migration: Fix compilation with older compilers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Juan Quintela [Wed, 20 Apr 2016 09:56:01 +0000 (11:56 +0200)]
migration: Don't create decompression threads if not enabled
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
I removed the [HACK] part because previous patch just check that
compression pages are not received.
Juan Quintela [Wed, 2 Nov 2016 11:40:46 +0000 (12:40 +0100)]
migration: Test for disabled features on reception
Right now, if we receive a compressed page while this features are
disabled, Bad Things (TM) can happen. Just add a test for them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
I had XBZRLE here also, but it don't need extra resources on
destination, only on source. Additionally libvirt don't enable it on
destination, so don't put it here.
- initialize invalid_flags at declaration time.
- remove extra space (peter)
Juan Quintela [Mon, 24 Apr 2017 14:51:10 +0000 (16:51 +0200)]
migration: Remove unneeded includes
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Peter Xu [Wed, 14 Jun 2017 07:55:58 +0000 (15:55 +0800)]
migration: fix incorrect enable return path
0425dc9 is actually v1 of that patch, but it was accidentally
merged (while there was a v2). That will cause problem when we try to
migrate to some old QEMUs when return path is not really there. Let's
fix it, then squashing this patch with
0425dc9 will be exactly patch
content of v2.
Fixes:
0425dc9 ("migration: isolate return path on src")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 14 Jun 2017 08:34:34 +0000 (10:34 +0200)]
migration: Fix compilation with older compilers
That typedefs are needed on both files. New compilers (F25 where I
work) don't complain about repeating a typedef. But older ones
complain.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Hildenbrand [Fri, 9 Jun 2017 13:34:26 +0000 (15:34 +0200)]
s390x/cpumodel: wire up cpu type + id for TCG
Let's properly expose the CPU type (machine-type number) via "STORE CPU
ID" and "STORE SUBSYSTEM INFORMATION".
As TCG emulates basic mode, the CPU identification number has the format
"Annnnn", whereby A is the CPU address, and n are parts of the CPU serial
number (0 for us for now).
A specification exception will be injected if the address is not aligned
to a double word. Low address protection will not be checked as
we're missing some more general support for that.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20170609133426.11447-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
David Hildenbrand [Fri, 9 Jun 2017 14:21:56 +0000 (16:21 +0200)]
target/s390x: rework PGM interrupt psw.addr handling
We can tell from the program interrupt code, whether a program interrupt
has to forward the address in the PGM new PSW
(suppressing/terminated/completed) to point at the next instruction, or
if it is nullifying and the PSW address does not have to be incremented.
So let's not modify the PSW address outside of the injection path and
handle this internally. We just have to handle instruction length
auto detection if no valid instruction length can be provided.
This should fix various program interrupt injection paths, where the
PSW was not properly forwarded.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20170609142156.18767-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
David Hildenbrand [Fri, 9 Jun 2017 14:21:55 +0000 (16:21 +0200)]
target/s390x: correctly indicate PER nullification
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20170609142156.18767-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Tue, 13 Jun 2017 14:49:07 +0000 (15:49 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20170613' into staging
target-arm queue:
* vITS: Support save/restore
* timer/aspeed: Fix timer enablement when reload is not set
* aspped: add temperature sensor device
* timer.h: Provide better monotonic time on ARM hosts
* exynos4210: various cleanups
* exynos4210: support system poweroff
# gpg: Signature made Tue 13 Jun 2017 15:05:49 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20170613:
hw/intc/arm_gicv3_its: Allow save/restore
hw/intc/arm_gicv3_kvm: Implement pending table save
hw/intc/arm_gicv3_its: Implement state save/restore
kvm-all: Pass an error object to kvm_device_access
timer/aspeed: fix timer enablement when a reload is not set
aspeed: add a temp sensor device on I2C bus 3
hw/misc: add a TMP42{1, 2, 3} device model
timer.h: Provide better monotonic time
hw/misc/exynos4210_pmu: Add support for system poweroff
hw/intc/exynos4210_gic: Constify array of combiner interrupts
hw/arm/exynos: Use type define instead of hard-coded a9mpcore_priv string
hw/arm/exynos: Declare local variables in some order
hw/arm/exynos: Move DRAM initialization next boards
hw/timer/exynos4210_mct: Remove unused defines
hw/timer/exynos4210_mct: Cleanup indentation and empty new lines
hw/timer/exynos4210_mct: Fix checkpatch style errors
hw/intc/exynos4210_gic: Use more meaningful name for local variable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Tue, 13 Jun 2017 13:57:01 +0000 (14:57 +0100)]
hw/intc/arm_gicv3_its: Allow save/restore
We change the restoration priority of both the GICv3 and ITS. The
GICv3 must be restored before the ITS and the ITS needs to be restored
before PCIe devices since it translates their MSI transactions.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id:
1497023553-18411-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Tue, 13 Jun 2017 13:57:00 +0000 (14:57 +0100)]
hw/intc/arm_gicv3_kvm: Implement pending table save
This patch adds the flush of the LPI pending bits into the
redistributor pending tables. This happens on VM stop.
There is no explicit restore as the tables are implicitly sync'ed
on ITS table restore and on LPI enable at redistributor level.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id:
1497023553-18411-4-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Tue, 13 Jun 2017 13:57:00 +0000 (14:57 +0100)]
hw/intc/arm_gicv3_its: Implement state save/restore
We need to handle both registers and ITS tables. While
register handling is standard, ITS table handling is more
challenging since the kernel API is devised so that the
tables are flushed into guest RAM and not in vmstate buffers.
Flushing the ITS tables on device pre_save() is too late
since the guest RAM is already saved at this point.
Table flushing needs to happen when we are sure the vcpus
are stopped and before the last dirty page saving. The
right point is RUN_STATE_FINISH_MIGRATE but sometimes the
VM gets stopped before migration launch so let's simply
flush the tables each time the VM gets stopped.
For regular ITS registers we just can use vmstate pre_save()
and post_load() callbacks.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id:
1497023553-18411-3-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Tue, 13 Jun 2017 13:57:00 +0000 (14:57 +0100)]
kvm-all: Pass an error object to kvm_device_access
In some circumstances, we don't want to abort if the
kvm_device_access fails. This will be the case during ITS
migration, in case the ITS table save/restore fails because
the guest did not program the vITS correctly. So let's pass an
error object to the function and return the ioctl value. New
callers will be able to make a decision upon this returned
value.
Existing callers pass &error_abort which will cause the
function to abort on failure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id:
1497023553-18411-2-git-send-email-eric.auger@redhat.com
[PMM: wrapped long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Tue, 13 Jun 2017 13:57:00 +0000 (14:57 +0100)]
timer/aspeed: fix timer enablement when a reload is not set
When a timer is enabled before a reload value is set, the controller
waits for a reload value to be set before starting decrementing. This
fix tries to cover that case by changing the timer expiry only when
a reload value is valid.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id:
1496739312-32304-1-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Tue, 13 Jun 2017 13:56:59 +0000 (14:56 +0100)]
aspeed: add a temp sensor device on I2C bus 3
Temperatures can be changed from the monitor with :
(qemu) qom-set /machine/unattached/device[2] temperature0 12000
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id:
1496739230-32109-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Tue, 13 Jun 2017 13:56:59 +0000 (14:56 +0100)]
hw/misc: add a TMP42{1, 2, 3} device model
Largely inspired by the TMP105 temperature sensor, here is a model for
the TMP42{1,2,3} temperature sensors.
Specs can be found here :
http://www.ti.com/lit/gpn/tmp421
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id:
1496739230-32109-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Pranith Kumar [Tue, 13 Jun 2017 13:56:59 +0000 (14:56 +0100)]
timer.h: Provide better monotonic time
Tested and confirmed that the stretch i386 debian qcow2 image on a
raspberry pi 2 works.
Fixes: LP#: 893208 <https://bugs.launchpad.net/qemu/+bug/893208/>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
20170418191817.10430-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:58 +0000 (14:56 +0100)]
hw/misc/exynos4210_pmu: Add support for system poweroff
On all Exynos-based boards, the system powers down itself by driving
PS_HOLD signal low - eight bit in PS_HOLD_CONTROL register of PMU.
Handle writing to respective PMU register to fix power off failure:
reboot: Power down
Unable to poweroff system
shutdown: 31 output lines suppressed due to ratelimiting
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
CPU: 0 PID: 1 Comm: shutdown Not tainted 4.11.0-rc8 #846
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c031050c>] (unwind_backtrace) from [<
c030ba6c>] (show_stack+0x10/0x14)
[<
c030ba6c>] (show_stack) from [<
c05b2800>] (dump_stack+0x88/0x9c)
[<
c05b2800>] (dump_stack) from [<
c03d3140>] (panic+0xdc/0x268)
[<
c03d3140>] (panic) from [<
c0343614>] (do_exit+0xa90/0xab4)
[<
c0343614>] (do_exit) from [<
c035f2dc>] (SyS_reboot+0x164/0x1d0)
[<
c035f2dc>] (SyS_reboot) from [<
c0307c80>] (ret_fast_syscall+0x0/0x3c)
Additionally the initial value of PS_HOLD has to be changed because
recent Linux kernel (v4.12-rc1) uses regmap cache for this access.
When the register is kept at reset value, the kernel will not issue a
write to it. Usually the bootloader sets the eight bit of PS_HOLD high
so mimic its existence here.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:58 +0000 (14:56 +0100)]
hw/intc/exynos4210_gic: Constify array of combiner interrupts
The static array of interrupt combiner mappings is not modified so it
can be made const for code safeness.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:58 +0000 (14:56 +0100)]
hw/arm/exynos: Use type define instead of hard-coded a9mpcore_priv string
Use a define for a9mpcore_priv device type name instead of hard-coded
string.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:57 +0000 (14:56 +0100)]
hw/arm/exynos: Declare local variables in some order
Bring some more readability by declaring local function variables: first
initialized ones and then the rest (with reversed-christmas-tree order).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:57 +0000 (14:56 +0100)]
hw/arm/exynos: Move DRAM initialization next boards
Before QOM-ifying the Exynos4 SoC model, move the DRAM initialization
from exynos4210.c to exynos4_boards.c because DRAM is board specific,
not SoC.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:57 +0000 (14:56 +0100)]
hw/timer/exynos4210_mct: Remove unused defines
Remove defines not used anywhere.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:57 +0000 (14:56 +0100)]
hw/timer/exynos4210_mct: Cleanup indentation and empty new lines
Statements under 'case' were in some places wrongly indented bringing
confusion and making the code less readable. Remove also few unneeded
blank lines. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:56 +0000 (14:56 +0100)]
hw/timer/exynos4210_mct: Fix checkpatch style errors
Fix checkpatch errors:
1. ERROR: spaces required around that '+' (ctx:VxV)
2. ERROR: spaces required around that '&' (ctx:VxV)
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Krzysztof Kozlowski [Tue, 13 Jun 2017 13:56:56 +0000 (14:56 +0100)]
hw/intc/exynos4210_gic: Use more meaningful name for local variable
There are to SysBusDevice variables in exynos4210_gic_realize()
function: one for the device itself and second for arm_gic device. Add
a prefix "gic" to the second one so it will be easier to understand the
code.
While at it, put local uninitialized 'i' variable at the end, next to
other uninitialized ones.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 13 Jun 2017 13:40:17 +0000 (14:40 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Tue 13 Jun 2017 14:35:25 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
monitor: resurrect handle_qmp_command trace event
monitor: add handle_hmp_command trace event
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Mon, 5 Jun 2017 10:42:16 +0000 (11:42 +0100)]
monitor: resurrect handle_qmp_command trace event
Commit
104fc3027960dd2aa9d310936a6cb201c60e1088 ("qmp: Drop duplicated
QMP command object checks") removed the call to
trace_handle_qmp_command() while eliminating code duplication.
This patch brings the trace event back so QEMU-internal trace events can
be correlated with the QMP commands that caused them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
20170605104216.22429-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 5 Jun 2017 10:42:15 +0000 (11:42 +0100)]
monitor: add handle_hmp_command trace event
It is often useful to correlate QEMU-internal events with monitor
commands that caused them. Trace the full HMP command being executed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
20170605104216.22429-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Tue, 13 Jun 2017 12:51:29 +0000 (13:51 +0100)]
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/
20170613' into staging
migration/next for
20170613
# gpg: Signature made Tue 13 Jun 2017 10:01:45 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/
20170613:
migration: Move migration.h to migration/
migration: Move remaining exported functions to migration/misc.h
migration: create global_state.c
migration: ram_control_* are implemented in qemu_file
migration: Commands are only used inside migration.c
migration: Move constants to savevm.h
migration: Move dump_vmsate_json_to_file() to misc.h
migration: Split registration functions from vmstate.h
migration: Move self_announce_delay() to misc.h
migration: Remove MigrationState from migration_channel_incomming()
ram: Now POSTCOPY_ACTIVE is the same that STATUS_ACTIVE
ram: Print block stats also in the complete case
migration: Don't try to set *errp directly
migration: isolate return path on src
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 13 Jun 2017 11:55:47 +0000 (12:55 +0100)]
Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging
# gpg: Signature made Fri 09 Jun 2017 13:41:59 BST
# gpg: using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* remotes/cody/tags/block-pull-request:
block/gluster.c: Handle qdict_array_entries() failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 13 Jun 2017 10:56:00 +0000 (11:56 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-
20170609' into staging
ppc patch queue 2017-06-09
This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.
It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes. There
are still a few missing pieces here, though.
# gpg: Signature made Fri 09 Jun 2017 06:26:03 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-
20170609:
Revert "spapr: fix memory hot-unplugging"
xics: drop ICPStateClass::cpu_setup() handler
xics: setup cpu at realize time
xics: pass appropriate types to realize() handlers.
xics: introduce macros for ICP/ICS link properties
hw/cpu: core.c can be compiled as common object
hw/ppc/spapr: Adjust firmware name for PCI bridges
xics: add reset() handler to ICPStateClass
pnv_core: drop reference on ICPState object during CPU realization
spapr: Rework DRC name handling
spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers
spapr: Change DRC attach & detach methods to functions
spapr: Clean up handling of DR-indicator
spapr: Clean up RTAS set-indicator
spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state()
spapr: Clean up DR entity sense handling
pseries: Correct panic behaviour for pseries machine type
spapr: fix memory leak in spapr_memory_pre_plug()
target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok()
target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 13 Jun 2017 10:14:06 +0000 (11:14 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, vhost: fixes
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 08 Jun 2017 20:04:24 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pcie: fix the generic pcie root port to support migration
nvdimm acpi: fix region format interface code
vhost-user-bridge: fix iov_restore_front() warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Juan Quintela [Mon, 24 Apr 2017 18:07:27 +0000 (20:07 +0200)]
migration: Move migration.h to migration/
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Mon, 24 Apr 2017 17:02:44 +0000 (19:02 +0200)]
migration: Move remaining exported functions to migration/misc.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Juan Quintela [Mon, 24 Apr 2017 16:53:30 +0000 (18:53 +0200)]
migration: create global_state.c
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Mon, 24 Apr 2017 16:24:28 +0000 (18:24 +0200)]
migration: ram_control_* are implemented in qemu_file
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Mon, 24 Apr 2017 15:37:14 +0000 (17:37 +0200)]
migration: Commands are only used inside migration.c
So, move them there. Notice that we export functions that send
commands, not the command themselves.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Mon, 24 Apr 2017 15:36:46 +0000 (17:36 +0200)]
migration: Move constants to savevm.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Mon, 24 Apr 2017 11:51:10 +0000 (13:51 +0200)]
migration: Move dump_vmsate_json_to_file() to misc.h
It was not from vmstate.c to start with.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Mon, 24 Apr 2017 11:42:55 +0000 (13:42 +0200)]
migration: Split registration functions from vmstate.h
They are indpendent, and nowadays almost every device register things
with qdev->vmsd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Juan Quintela [Fri, 21 Apr 2017 15:39:30 +0000 (17:39 +0200)]
migration: Move self_announce_delay() to misc.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Mon, 17 Apr 2017 15:15:02 +0000 (17:15 +0200)]
migration: Remove MigrationState from migration_channel_incomming()
All callers were calling migrate_get_current(), so do it inside the function.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Tue, 6 Jun 2017 17:21:29 +0000 (19:21 +0200)]
ram: Now POSTCOPY_ACTIVE is the same that STATUS_ACTIVE
Merge them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Juan Quintela [Thu, 4 May 2017 08:21:46 +0000 (10:21 +0200)]
ram: Print block stats also in the complete case
Once there, create populate_disk_info.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
--
- create populate_disk_info instead of "abusing" populate_ram_info
Eduardo Habkost [Thu, 8 Jun 2017 13:39:05 +0000 (10:39 -0300)]
migration: Don't try to set *errp directly
Assigning directly to *errp is not valid, as errp may be NULL,
&error_fatal, or &error_abort. Use error_propagate() instead.
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Wed, 31 May 2017 10:35:34 +0000 (18:35 +0800)]
migration: isolate return path on src
There are some places that binded "return path" with postcopy. Let's be
prepared for its usage even without postcopy. This patch mainly did this
on source side.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Maydell [Tue, 13 Jun 2017 08:27:17 +0000 (09:27 +0100)]
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-
20170608' into staging
s390x: misc fixes
bunch of fixes
- reject MIDA accesses for CCWs
- cpumodel fixes
- cross-build fix for bios
- migration improvements
# gpg: Signature made Thu 08 Jun 2017 14:10:29 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-
20170608:
s390x/cpumodel: improve defintion search without an IBC
s390x/cpumodel: take care of the cpuid format bit for KVM
pc-bios/s390-ccw: use STRIP variable in Makefile
s390x/css: fence off MIDA
s390x/css: catch section mismatch on load
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 12 Jun 2017 18:26:49 +0000 (19:26 +0100)]
Merge remote-tracking branch 'remotes/elmarco/tags/char-pull-request' into staging
# gpg: Signature made Thu 08 Jun 2017 15:12:11 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/char-pull-request:
test-char: start a /char/serial test
chardev: don't use alias names in parse_compat()
char: fix alias devices regression
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 12 Jun 2017 13:51:30 +0000 (14:51 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Wed 07 Jun 2017 19:55:32 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
simpletrace: Improve the error message if event is not declared
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 12 Jun 2017 13:14:42 +0000 (14:14 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Wed 07 Jun 2017 19:06:51 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
configure: split c and cxx extra flags
coroutine-lock: do not touch coroutine after another one has been entered
.gdbinit: load QEMU sub-commands when gdb starts
coccinelle: fix typo in comment
oslib: strip trailing '\n' from error_setg() string argument
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 12 Jun 2017 09:43:32 +0000 (10:43 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 09 Jun 2017 12:47:31 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: fix external snapshot abort permission error
block/qcow.c: Fix memory leak in qcow_create()
qemu-iotests: Test automatic commit job cancel on hot unplug
commit: Fix use after free in completion
qemu-iotests: Block migration test
migration/block: Clean up BBs in block_save_complete()
migration: Inactivate images after .save_live_complete_precopy()
block: Fix anonymous BBs in blk_root_inactivate()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 5 Jun 2017 17:01:38 +0000 (18:01 +0100)]
block/gluster.c: Handle qdict_array_entries() failure
In qemu_gluster_parse_json(), the call to qdict_array_entries()
could return a negative error code, which we were ignoring
because we assigned the result to an unsigned variable.
Fix this by using the 'int' type instead, which matches the
return type of qdict_array_entries() and also the type
we use for the loop enumeration variable 'i'.
(Spotted by Coverity, CID
1360960.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id:
1496682098-1540-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Jeff Cody <jcody@redhat.com>
Jeff Cody [Wed, 7 Jun 2017 13:55:22 +0000 (09:55 -0400)]
block: fix external snapshot abort permission error
In external_snapshot_abort(), we try to undo what was done in
external_snapshot_prepare() calling bdrv_replace_node() to swap the
nodes back. However, we receive a permissions error as writers are
blocked on the old node, which is now the new node backing file.
An easy fix (initially suggested by Kevin Wolf) is to call
bdrv_set_backing_hd() on the new node, to set the backing node to NULL.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Mon, 5 Jun 2017 13:55:54 +0000 (14:55 +0100)]
block/qcow.c: Fix memory leak in qcow_create()
Coverity points out that the code path in qcow_create() for
the magic "fat:" backing file name leaks the memory used to
store the filename (CID
1307771). Free the memory before
we overwrite the pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 2 Jun 2017 21:10:10 +0000 (23:10 +0200)]
qemu-iotests: Test automatic commit job cancel on hot unplug
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Fri, 2 Jun 2017 21:04:55 +0000 (23:04 +0200)]
commit: Fix use after free in completion
The final bdrv_set_backing_hd() could be working on already freed nodes
because the commit job drops its references (through BlockBackends) to
both overlay_bs and top already a bit earlier.
One way to trigger the bug is hot unplugging a disk for which
blockdev_mark_auto_del() cancels the block job.
Fix this by taking BDS-level references while we're still using the
nodes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Kevin Wolf [Tue, 23 May 2017 12:53:10 +0000 (14:53 +0200)]
qemu-iotests: Block migration test
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Mon, 22 May 2017 15:17:49 +0000 (17:17 +0200)]
migration/block: Clean up BBs in block_save_complete()
We need to release any block migrations BlockBackends on the source
before successfully completing the migration because otherwise
inactivating the images will fail (inactivation only tolerates device
BBs).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Kevin Wolf [Mon, 22 May 2017 15:10:38 +0000 (17:10 +0200)]
migration: Inactivate images after .save_live_complete_precopy()
Block migration may still access the image during its
.save_live_complete_precopy() implementation, so we should only
inactivate the image afterwards.
Another reason for the change is that inactivating an image fails when
there is still a non-device BlockBackend using it, which includes the
BBs used by block migration. We want to give block migration a chance to
release the BBs before trying to inactivate the image (this will be done
in another patch).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Kevin Wolf [Mon, 22 May 2017 15:03:39 +0000 (17:03 +0200)]
block: Fix anonymous BBs in blk_root_inactivate()
blk->name isn't an array, but a pointer that can be NULL. Checking for
an anonymous BB must involve a NULL check first, otherwise we get
crashes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Laurent Vivier [Thu, 8 Jun 2017 17:27:43 +0000 (19:27 +0200)]
Revert "spapr: fix memory hot-unplugging"
This reverts commit
fe6824d12642b005c69123ecf8631f9b13553f8b.
Conflicts hw/ppc/spapr_drc.c, because get_index() has been renamed
spapr_get_index().
This didn't fix the problem. Once the hotplug has been started
some memory is allocated and some structures are allocated.
We don't free it when we ignore the unplug, and we can't because
they can be in use by the kernel.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 8 Jun 2017 13:43:08 +0000 (15:43 +0200)]
xics: drop ICPStateClass::cpu_setup() handler
The cpu_setup() handler is only implemented by xics_kvm, where it really
does a typical "realize" job. Moreover, the realize() handler is called
shortly after cpu_setup(), on the same path.
This patch converts xics_kvm to implement realize() instead of cpu_setup().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 8 Jun 2017 13:42:59 +0000 (15:42 +0200)]
xics: setup cpu at realize time
Until recently, spapr used to allocate ICPState objects for the lifetime
of the machine. They would only be associated to vCPUs in xics_cpu_setup()
when plugging a CPU core.
Now that ICPState objects have the same lifecycle as vCPUs, it is
possible to associate them during realization.
This patch hence open-codes xics_cpu_setup() in icp_realize(). The vCPU
is passed as a property. Note that vCPU now needs to be realized first
for the IRQs to be allocated. It also needs to resetted before ICPState
realization in order to synchronize with KVM.
Since ICPState objects are freed when unrealized, xics_cpu_destroy() isn't
needed anymore and can be safely dropped.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 8 Jun 2017 13:42:50 +0000 (15:42 +0200)]
xics: pass appropriate types to realize() handlers.
It makes more sense to pass an IPCState * to handlers of ICPStateClass
instead of a DeviceState *, if only to benefit from compile time type
checking. The same goes with ICSStateClass.
While here, we also change the declaration of ICPStateClass in xics.h
for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 8 Jun 2017 13:42:41 +0000 (15:42 +0200)]
xics: introduce macros for ICP/ICS link properties
These properties are part of the XICS API. They deserve to appear
explicitely in the XICS header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Thu, 8 Jun 2017 13:18:54 +0000 (15:18 +0200)]
hw/cpu: core.c can be compiled as common object
There does not seem to be any target specific code in core.c, so we can
put it into "common-obj" instead of "obj" to compile it only once for
all targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Marcel Apfelbaum [Wed, 7 Jun 2017 12:43:59 +0000 (15:43 +0300)]
hw/pcie: fix the generic pcie root port to support migration
Add msix state to pcie-root-ports's vmstate
in order to support migration.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Haozhong Zhang [Wed, 7 Jun 2017 08:06:39 +0000 (16:06 +0800)]
nvdimm acpi: fix region format interface code
Per ACPI 6.2, section 5.2.25.6 and JEDEC Annex L Release 3, the
current region format interface code 0x201 indicates the block
addressed function interface 1, rather than a byte addressable
interface. Fix it by using 0x301 which indicates the byte addressable
no energy backed function interface 1.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Marc-André Lureau [Fri, 2 Jun 2017 08:15:19 +0000 (12:15 +0400)]
vhost-user-bridge: fix iov_restore_front() warning
CC tests/vhost-user-bridge.o
/home/dgilbert/git/qemu-world3/tests/vhost-user-bridge.c:228:23: warning: variables 'front' and 'iov' used in loop condition not modified in loop body [-Wfor-loop-analysis]
for (cur = front; front != iov; cur++) {
^~~~~ ~~~
1 warning generated.
Fix the loop, document the function, and fix some related assert().
In practice, the loop bug was harmless because the front sg buffer is
enough to discard/restore the header size.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Jens Freimann <jfreiman@redhat.com>
Marc-André Lureau [Wed, 7 Jun 2017 18:26:38 +0000 (22:26 +0400)]
test-char: start a /char/serial test
Quite limited test, to check that the chardev can be created with a
path and with the tty alias.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Marc-André Lureau [Wed, 7 Jun 2017 17:41:15 +0000 (21:41 +0400)]
chardev: don't use alias names in parse_compat()
"parport" is considered "old" since commit
88a946d32d, when "parallel"
was added. Similarly for "tty" in commit
d59044ef74d.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Marc-André Lureau [Wed, 7 Jun 2017 17:33:29 +0000 (21:33 +0400)]
char: fix alias devices regression
Fix regression from commit
4d43a603c71, where the serial and parallel
headers got removed from char.c, which broke the alias table.
Move the HAVE_CHARDEV_SERIAL/HAVE_CHARDEV_PARPORT to osdep.h instead
of being in separate headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Thomas Huth [Wed, 7 Jun 2017 08:20:27 +0000 (10:20 +0200)]
hw/ppc/spapr: Adjust firmware name for PCI bridges
SLOF uses "pci" as name for PCI bridges nodes in the device tree instead
of "pci-bridges", so booting via bootindex from a device behind a PCI
bridge currently does not work since QEMU passes the wrong name in the
"qemu,boot-list" property. Fix it by changing the name of the PCI bridge
nodes to "pci" instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1459170
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Wed, 7 Jun 2017 17:17:00 +0000 (19:17 +0200)]
xics: add reset() handler to ICPStateClass
Taking into account that qemu_set_irq() returns immediatly if its first
argument is NULL, icp_kvm_reset() largely duplicates icp_reset().
This patch introduces a reset() handler, so that the common logic can
be implemented in icp_reset() only.
While there we can also drop icp_kvm_realize() and icp_kvm_unrealize(). This
causes icp-kvm to be realized in icp_realize(), which sets icp->xics, but
it has no impact.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Wed, 7 Jun 2017 17:16:52 +0000 (19:16 +0200)]
pnv_core: drop reference on ICPState object during CPU realization
Similarly to what was done to spapr with commit
249127d0dfeb, this patch
ensures that we don't keep an extra reference on the ICPState object. Also
since the object was just created and not reparented yet, the call to
object_property_add_child() should never fail: let's pass &error_abort to
make this clear.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Wed, 7 Jun 2017 02:00:11 +0000 (12:00 +1000)]
spapr: Rework DRC name handling
DRC objects have a get_name method which returns the DRC name generated
when the DRC is created. Replace that with a fixed spapr_drc_name()
function which generates the name on the fly from other information. This
means:
* We get rid of a method with only one implementation, and only local
callers
* We don't have to carry the name string around for the lifetime of the
DRC
* We use information added to the class structure to generate the name
in standard format, so we don't need an explicit switch on drc type
any more
We also eliminate the 'name' property; it's basically useless since the
only information in it can easily be deduced from other things.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Wed, 7 Jun 2017 01:35:03 +0000 (11:35 +1000)]
spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers
Both functions are fairly short, and so are their callers. There's no
particular logical distinction between them, so fold them together.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Tue, 6 Jun 2017 07:44:11 +0000 (17:44 +1000)]
spapr: Change DRC attach & detach methods to functions
DRC objects have attach & detach methods, but there's only one
implementation. Although there are some differences in its behaviour for
different DRC types, the overall structure is the same, so while we might
want different method implementations for some parts, we're unlikely to
want them for the top-level functions.
So, replace them with direct function calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Tue, 6 Jun 2017 07:42:26 +0000 (17:42 +1000)]
spapr: Clean up handling of DR-indicator
There are 3 types of "indicator" associated with hotplug in the PAPR spec
the "allocation state", "isolation state" and "DR-indicator". The first
two are intimately tied to the various state transitions associated with
hotplug. The DR-indicator, however, is different and simpler.
It's basically just a guest controlled variable which can be used by the
guest to flag state or problems associated with a device. The idea is that
the hypervisor can use it to present information back on management
consoles (on some machines with PowerVM it may even control physical LEDs
on the machine case associated with the relevant device).
For that reason, there's only ever likely to be a single update
implementation so the set_indicator_state method isn't useful. Replace it
with a direct function call.
While we're there, make some small associated cleanups:
* PAPR doesn't use the term "indicator state", just "DR-indicator" and
the allocation state and isolation state are also considered "indicators".
Rename things to be less confusing
* Fold set_indicator_state() and rtas_set_indicator_state() into a single
rtas_set_dr_indicator() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Tue, 6 Jun 2017 07:05:53 +0000 (17:05 +1000)]
spapr: Clean up RTAS set-indicator
In theory the RTAS set-indicator call can be used for a number of
"indicators" defined by PAPR. In practice the only ones we're ever likely
to implement are those used for Dynamic Reconfiguration (i.e. hotplug).
Because of this, the current implementation determines the associated DRC
object, before dispatching based on the type of indicator.
However, this means we also need a check that we're dealing with a DR
related indicator at all, which duplicates some of the logic from the
switch further down.
Even though it means a bit of code duplication, things work out cleaner if
we delegate the DRC lookup to the individual indicator type functions -
and it also allows some further cleanups.
While we're there, remove references to "sensor", a copy/paste artefact
from the related, but distinct "get-sensor" call.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Tue, 6 Jun 2017 07:01:21 +0000 (17:01 +1000)]
spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state()
With some combinations of migration and hotplug we can lost temporary state
indicating how many DRCs (guest side hotplug handles) are still connected
to a DIMM object in the process of removal. When we hit that situation
spapr_recover_pending_dimm_state() is used to scan more extensively and
work out the right number.
It does this using drc->indicator state to determine what state of
disconnection the DRC is in. However, this is not safe, because the
indicator state is guest settable - in fact it's more-or-less a purely
guest->host notification mechanism which should have no bearing on the
internals of hotplug state management.
So, replace the test for this with a test on drc->dev, which is a purely
qemu side managed variable, and updated the same BQL critical section as
the indicator state.
This does introduce an off-by-one change, because the indicator state was
updated before the call to spapr_lmb_release() on the current DRC, whereas
drc->dev is updated afterwards. That's corrected by always decrementing
the nr_lmbs value instead of only doing so in the case where we didn't
have to recover information.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Wed, 7 Jun 2017 01:26:52 +0000 (11:26 +1000)]
spapr: Clean up DR entity sense handling
DRC classes have an entity_sense method to determine (in a specific PAPR
sense) the presence or absence of a device plugged into a DRC. However,
we only have one implementation of the method, which explicitly tests for
different DRC types. This changes it to instead have different method
implementations for the two cases: "logical" and "physical" DRCs.
While we're at it, the entity sense method always returns RTAS_OUT_SUCCESS,
and the interesting value is returned via pass-by-reference. Simplify this
to directly return the value we care about
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
David Gibson [Wed, 7 Jun 2017 07:06:44 +0000 (17:06 +1000)]
pseries: Correct panic behaviour for pseries machine type
The pseries machine type doesn't usually use the 'pvpanic' device as such,
because it has a firmware/hypervisor facility with roughly the same
purpose. The 'ibm,os-term' RTAS call notifies the hypervisor that the
guest has crashed.
Our implementation of this call was sending a GUEST_PANICKED qmp event;
however, it was not doing the other usual panic actions, making its
behaviour different from pvpanic for no good reason.
To correct this, we should call qemu_system_guest_panicked() rather than
directly sending the panic event.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Greg Kurz [Tue, 6 Jun 2017 15:22:58 +0000 (17:22 +0200)]
spapr: fix memory leak in spapr_memory_pre_plug()
The string returned by object_property_get_str() is dynamically allocated.
(Spotted by Coverity, CID
1375942)
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Tue, 6 Jun 2017 15:22:53 +0000 (17:22 +0200)]
target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok()
The string returned by object_property_get_str() is dynamically allocated.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Tue, 6 Jun 2017 16:12:24 +0000 (18:12 +0200)]
target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok()
This function has three implementations. Two are stubs that do nothing
and the third one only passes the obj_path argument to:
Object *object_resolve_path(const char *path, bool *ambiguous);
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell [Wed, 7 Jun 2017 17:24:08 +0000 (18:24 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* virtio-scsi use-after-free fix (Fam)
* SMM fixes and improvements for TCG (myself, Mihail)
* irqchip and AddressSpaceDispatch cleanups and fixes (Peter)
* Coverity fix (Stefano)
* NBD cleanups and fixes (Vladimir, Eric, myself)
* RTC accuracy improvements and code cleanups (Guangrong+Yunfang)
* socket error reporting improvement (Daniel)
* GDB XML description for SSE registers (Abdallah)
* kvmclock update fix (Denis)
* SMM memory savings (Gonglei)
* -cpu 486 fix (myself)
* various bugfixes (Roman, Peter, myself, Thomas)
* rtc-test improvement (Guangrong)
* migration throttling fix (Felipe)
* create docs/ subdirectories (myself)
# gpg: Signature made Wed 07 Jun 2017 17:22:07 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (31 commits)
docs: create config/, devel/ and spin/ subdirectories
cpus: reset throttle_thread_scheduled after sleep
kvm: don't register smram_listener when smm is off
nbd: make it thread-safe, fix qcow2 over nbd
target/i386: Add GDB XML description for SSE registers
i386/kvm: do not zero out segment flags if segment is unusable or not present
edu: fix memory leak on msi_broken platforms
linuxboot_dma: compile for i486
kvmclock: update system_time_msr address forcibly
nbd: Fully initialize client in case of failed negotiation
sockets: improve error reporting if UNIX socket path is too long
i386: fix read/write cr with icount option
target/i386: use multiple CPU AddressSpaces
target/i386: enable A20 automatically in system management mode
virtio-scsi: Unset hotplug handler when unrealize
exec: simplify phys_page_find() params
nbd/client.c: use errp instead of LOG
nbd: add errp to read_sync, write_sync and drop_sync
nbd: add errp parameter to nbd_wr_syncv()
nbd: read_sync and friends: return 0 on success
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Tue, 6 Jun 2017 14:46:26 +0000 (16:46 +0200)]
docs: create config/, devel/ and spin/ subdirectories
Developer documentation should be its own manual. As a start, move all
developer-oriented files to a separate directory.
Also move non-text files to their own directories: docs/config/ for
QEMU -readconfig input, and docs/spin/ for formal models to be used
with the SPIN model checker.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Felipe Franciosi [Fri, 19 May 2017 21:29:50 +0000 (22:29 +0100)]
cpus: reset throttle_thread_scheduled after sleep
Currently, the throttle_thread_scheduled flag is reset back to 0 before
sleeping (as part of the throttling logic). Given that throttle_timer
(well, any timer) may tick with a slight delay, it so happens that under
heavy throttling (ie. close or on CPU_THROTTLE_PCT_MAX) the tick may
schedule a further cpu_throttle_thread() work item after the flag reset,
but before the previous sleep completed. This results on the vCPU thread
sleeping continuously for potentially several seconds in a row.
The chances of that happening can be drastically minimised by resetting
the flag after the sleep.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Malcolm Crossley <malcolm@nutanix.com>
Message-Id: <
1495229390-18909-1-git-send-email-felipe@nutanix.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gonglei [Thu, 1 Jun 2017 11:35:15 +0000 (19:35 +0800)]
kvm: don't register smram_listener when smm is off
If the user set disable smm by '-machine smm=off', we
should not register smram_listener so that we can
avoid waster memory in kvm since the added sencond
address space.
Meanwhile we should assign value of the global kvm_state
before invoking the kvm_arch_init(), because
pc_machine_is_smm_enabled() may use it by kvm_has_mm().
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <
1496316915-121196-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 1 Jun 2017 10:44:56 +0000 (12:44 +0200)]
nbd: make it thread-safe, fix qcow2 over nbd
NBD is not thread safe, because it accesses s->in_flight without
a CoMutex. Fixing this will be required for multiqueue.
CoQueue doesn't have spurious wakeups but, when another coroutine can
run between qemu_co_queue_next's wakeup and qemu_co_queue_wait's
re-locking of the mutex, the wait condition can become false and
a loop is necessary.
In fact, it turns out that the loop is necessary even without this
multi-threaded scenario. A particular sequence of coroutine wakeups
is happening ~80% of the time when starting a guest with qcow2 image
served over NBD (i.e. qemu-nbd --format=raw, and QEMU's -drive option
has -format=qcow2). This patch fixes that issue too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Abdallah Bouassida [Thu, 1 Jun 2017 09:33:15 +0000 (11:33 +0200)]
target/i386: Add GDB XML description for SSE registers
Add an XML description for SSE registers (XMM+MXCSR) for both X86
and X86-64 architectures in the GDB stub:
- configure: Define gdb_xml_files for the X86 targets (32 and 64bit).
- gdb-xml/i386-32bit-sse.xml & gdb-xml/i386-64bit-sse.xml: The XML files
that contain a description of the XMM + MXCSR registers.
- gdb-xml/i386-32bit.xml & gdb-xml/i386-64bit.xml: wrappers that include
the XML file of the core registers and the other XML file of the SSE registers.
- target/i386/cpu.c: Modify the gdb_core_xml_file to the new XML wrapper,
modify the gdb_num_core_regs to fit the registers number defined in each
XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Pen [Thu, 1 Jun 2017 08:56:04 +0000 (10:56 +0200)]
i386/kvm: do not zero out segment flags if segment is unusable or not present
This is a fix for the problem [1], where VMCB.CPL was set to 0 and interrupt
was taken on userspace stack. The root cause lies in the specific AMD CPU
behaviour which manifests itself as unusable segment attributes on SYSRET[2].
Here in this patch flags are not touched even segment is unusable or is not
present, therefore CPL (which is stored in DPL field) should not be lost and
will be successfully restored on kvm/svm kernel side.
Also current patch should not break desired behavior described in this commit:
4cae9c97967a ("target-i386: kvm: clear unusable segments' flags in migration")
since present bit will be dropped if segment is unusable or is not present.
This is the second part of the whole fix of the corresponding problem [1],
first part is related to kvm/svm kernel side and does exactly the same:
segment attributes are not zeroed out.
[1] Message id: CAJrWOzD6Xq==b-zYCDdFLgSRMPM-NkNuTSDFEtX=7MreT45i7Q@mail.gmail.com
[2] Message id:
5d120f358612d73fc909f5bfa47e7bd082db0af0.
1429841474.git.luto@kernel.org
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Mikhail Sennikovskii <mikhail.sennikovskii@profitbricks.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael Chapman <mike@very.puzzling.org>
Cc: qemu-devel@nongnu.org
Message-Id: <
20170601085604.12980-1-roman.penyaev@profitbricks.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 31 May 2017 12:56:37 +0000 (14:56 +0200)]
edu: fix memory leak on msi_broken platforms
If msi_init fails, the thread has already been created and the
mutex/condvar are not destroyed. Initialize everything only
after the point where pci_edu_realize cannot fail.
Reported-by: Markus Armbruster <armbru@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 31 May 2017 12:37:15 +0000 (14:37 +0200)]
linuxboot_dma: compile for i486
The ROM uses the cmovne instruction, which is new in Pentium Pro and does not
work when running QEMU with "-cpu 486". Avoid producing that instruction.
Suggested-by: Richard W.M. Jones <rjones@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reported-by: Rob Landley <rob@landley.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>