OSDN Git Service
Axel Lin [Sat, 27 Aug 2011 06:37:33 +0000 (23:37 -0700)]
Input: adp5588-keys - remove incorrect modalias
For i2c drivers, we should use "i2c:" prefix for modalias.
MODULE_DEVICE_TABLE will setup the modulalias for us, thus adding
a MODULE_ALIAS is redundant (in addition to being incorrect).
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
axel lin [Thu, 25 Aug 2011 16:42:09 +0000 (09:42 -0700)]
Input: cm109 - fix checking return value of usb_control_msg
If successful, usb_control_msg returns the number of bytes transferred,
otherwise a negative error number.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jason Gerecke [Sat, 27 Aug 2011 06:18:22 +0000 (23:18 -0700)]
Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner
The Wacom PenPartner should advertise its stylus tip and button
in addition to the eraser tool. These are both physically
present on the hardware, and emitted from 'wacom_penpartner_irq'.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Sat, 27 Aug 2011 06:10:02 +0000 (23:10 -0700)]
Input: wacom - remove pressure for touch devices
Touch devices do not report valid pressure or capacitance.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Michael Hennerich [Mon, 22 Aug 2011 16:45:42 +0000 (09:45 -0700)]
Input: ad714x - read the interrupt status registers in a row
The interrupt status registers should be read in row to avoid invalid data.
Alter "read" method for both bus options to allow reading several registers
in a row and make sure we read interrupt status registers properly.
Read sequence saves 50% of bus transactions compared to single register
reads. So use it also for the result registers, which are also located
in a row.
Also update copyright notice.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Mon, 22 Aug 2011 16:45:39 +0000 (09:45 -0700)]
Input: ad714x - use DMA-safe buffers for spi_write()
spi_write() requires use of DMA-safe (cacheline aligned) buffers.
Also use the same buffers when reading data since to avoid extra
locking and potential memory allocation in spi_write_then_read().
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Michael Hennerich [Mon, 22 Aug 2011 04:04:12 +0000 (21:04 -0700)]
Input: ad714x - fix endianness issues
Allow driver to be used on Big Endian boxes.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Michael Hennerich [Mon, 22 Aug 2011 04:04:12 +0000 (21:04 -0700)]
Input: ad714xx-spi - force SPI bus into the default 8-bit mode
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Sun, 21 Aug 2011 19:48:08 +0000 (12:48 -0700)]
Input: ep93xx_keypad - add missing include of linux/module.h
ep93xx_keypad.c uses interfaces from linux/module.h,
so it should include that file. This patch fixes build errors.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Sun, 21 Aug 2011 19:48:04 +0000 (12:48 -0700)]
Input: tnetv107x-ts - add missing include of linux/module.h
tnetv107x-ts.c uses interfaces from linux/module.h,
so it should include that file. This patch fixes build errors.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jiejing Zhang [Sat, 20 Aug 2011 21:38:01 +0000 (14:38 -0700)]
Input: max11801_ts - correct license statement
The original license statement was confusing since it was unclear if
the license was pure GPLv2 or GPLv2+ and did not match the license
of the driver max11801_ts was derived from. The license is GPLv2+.
Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Yufeng Shen [Tue, 16 Aug 2011 07:40:54 +0000 (00:40 -0700)]
Input: atmel_mxt_ts - report pressure information from the driver
Atmel mxt1386 touch controller has the touch pressure information so
let's report it to the user space.
[dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.]
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Acked-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Andrew Drake [Tue, 16 Aug 2011 18:07:39 +0000 (11:07 -0700)]
Input: bcm5974 - Add support for newer MacBookPro8,2
New MacBook Pro devices reporting product name MacBookPro8,2 come with
newer/higher resolution touchpads than others with the same product
name with USB ID 05ac:0252. This patch adds support for these devices.
Signed-off-by: Andrew Drake <adrake@adrake.org>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Tue, 16 Aug 2011 07:17:57 +0000 (00:17 -0700)]
Input: wacom - report id 3 returns 4 bytes of data
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Tue, 16 Aug 2011 07:17:56 +0000 (00:17 -0700)]
Input: wacom - add WAC_MSG_RETRIES define
Use WAC_MSG_RETRIES define instead of a numeric constant.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Gerard Braad [Tue, 16 Aug 2011 07:17:56 +0000 (00:17 -0700)]
Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
Signed-off-by: Gerard Braad <me@gbraad.nl>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Thu, 11 Aug 2011 16:22:45 +0000 (09:22 -0700)]
Input: tegra-kbc - correct call to input_free_device
If kzalloc for kbc fails, then we have NULL pointer dereference while
calling input_free_device(kbc->idev) in the error handling.
So it is safer to always use the original name, input_dev.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Thu, 11 Aug 2011 16:19:29 +0000 (09:19 -0700)]
Input: mpu3050 - correct call to input_free_device
input_free_device() should be used if input_register_device() was not called
yet or if it failed.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Joshua V. Dillon [Tue, 9 Aug 2011 06:45:14 +0000 (23:45 -0700)]
Input: bcm5974 - add support for touchpads found in MacBookAir4,2
Added USB device IDs for MacBookAir4,2 trackpad. Device constants were
copied from the MacBookAir3,2 constants. The 4,2 device specification is
reportedly unchanged from the 3,2 predecessor and seems to work well.
Signed-off-by: Joshua V Dillon <jvdillon@gmail.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 9 Aug 2011 06:39:59 +0000 (23:39 -0700)]
Input: mma8450 - fix module device table type
The module device table for of_device_id should use "of" type.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Deepak Saxena [Fri, 5 Aug 2011 06:39:58 +0000 (23:39 -0700)]
Input: remove CLOCK_TICK_RATE from analog joystick driver
The analog joystick driver is written for x86 systems. This
patch updates it to use the PIT_TICK_RATE value instead of
CLOCK_TICK_RATE as they are equivalent on x86 and we want to
deprecate the latter.
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Michael Hennerich [Tue, 2 Aug 2011 22:41:37 +0000 (15:41 -0700)]
Input: ad7879 - fix deficient device disable
Input close or device disable should not interact with the exported
gpiolib functionality. However that's the case. __ad7879_disable()
clears the entire AD7879_REG_CTRL2, while it should just power down
the ADC and its reference.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Tobias Klauser [Tue, 2 Aug 2011 22:40:22 +0000 (15:40 -0700)]
Input: gpio_keys - fix two typos in devicetree documentation
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Shawn Guo [Mon, 1 Aug 2011 02:56:10 +0000 (19:56 -0700)]
Input: mma8450 - add device tree probe support
It adds device tree probe support for mma8450 driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Eric Miao <eric.miao@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Tobias Klauser [Sat, 30 Jul 2011 19:08:10 +0000 (12:08 -0700)]
Input: gpio_keys - return proper error code if memory allocation fails
Return -ENOMEM if kzalloc fails in gpio_keys_get_devtree_pdata().
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Sat, 30 Jul 2011 19:05:13 +0000 (12:05 -0700)]
Input: lm8323 - add missing device_remove_file for dev_attr_time
Add missing device_remove_file() for dev_attr_time in lm8323_remove().
Also calling device_remove_file() in lm8323_probe() error path to
remove sysfs attribute file.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Rakesh Iyer [Sat, 30 Jul 2011 19:01:48 +0000 (12:01 -0700)]
Input: tegra-kbc - fix computation of polling time
Fix a constant definition and computation of polling time.
[dtor@mail.ru: switched to using DIV_ROUND_UP as was suggested by
Thierry Reding <thierry.reding@avionic-design.de>]
Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Stephen Rothwell [Sat, 30 Jul 2011 18:55:38 +0000 (11:55 -0700)]
Input: kxtj9 - explicitly include module.h
We need to explicitly include module.h since some of its facilities
are used.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Randy Dunlap [Sat, 30 Jul 2011 18:53:47 +0000 (11:53 -0700)]
Input: psmouse - hgpk.c needs module.h
hgpk.c uses interfaces from linux/module.h, so it should include that file.
This fixes build errors.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Wed, 27 Jul 2011 07:54:47 +0000 (00:54 -0700)]
Merge branch 'next' into for-linus
Dmitry Torokhov [Mon, 25 Jul 2011 08:36:46 +0000 (01:36 -0700)]
Input: synaptics - fix reporting of min coordinates
We were testing wrong bit in the extended capability query.
Reported-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Rakesh Iyer [Mon, 25 Jul 2011 07:49:55 +0000 (00:49 -0700)]
Input: tegra-kbc - enable key autorepeat
To support key repeats, keyboard needs to be setup as an autorepeating
device.
Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dan Carpenter [Wed, 20 Jul 2011 06:16:29 +0000 (23:16 -0700)]
Input: kxtj9 - fix locking typo in kxtj9_set_poll()
According to the comments we want to call mutex_lock() here instead
of mutex_unlock(). That makes more sense.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dan Carpenter [Wed, 20 Jul 2011 06:12:21 +0000 (23:12 -0700)]
Input: kxtj9 - fix bug in probe()
We are testing the wrong variable here. I believe tj9->input_dev
is always NULL at this point, so probe() will fail.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 19 Jul 2011 00:09:05 +0000 (17:09 -0700)]
Input: intel-mid-touch - remove pointless checking for variable 'found'
The implementation does break from the for loop after we assign 'i' to
variable 'found'.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 19 Jul 2011 00:09:46 +0000 (17:09 -0700)]
Input: hp_sdc - staticize hp_sdc_kicker()
It's not referenced outside this file so there's no need for it to be in
the global name space.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 19 Jul 2011 00:09:22 +0000 (17:09 -0700)]
Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure
Make sure we are passing the same cookie in all calls to
request_any_context_irq() and free_irq().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 19 Jul 2011 00:09:37 +0000 (17:09 -0700)]
Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
The implementation in cy8ctmg110_probe() does not properly set reset_pin
and irq_pin from platform data. Let's fix it.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Wed, 13 Jul 2011 07:04:36 +0000 (00:04 -0700)]
Input: cy8ctmg110_ts - constify i2c_device_id table
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Wed, 13 Jul 2011 07:03:36 +0000 (00:03 -0700)]
Input: cy8ctmg110_ts - fix checking return value of i2c_master_send
i2c_master_send returns negative errno, or else the number of bytes written.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Wed, 13 Jul 2011 07:02:21 +0000 (00:02 -0700)]
Input: lifebook - make dmi callback functions return 1
We only care about if there is a successful match from the table (or
no match at all), so let's make dmi_check_system return immediately
instead of iterating thorough the whole table.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Wed, 13 Jul 2011 06:59:41 +0000 (23:59 -0700)]
Input: atkbd - make dmi callback functions return 1
We only care about if there is a successful match from the table (or
no match at all), so let's make dmi_check_system return immediately
instead of iterating thorough the whole table.
Make the dmi callback function return 1 then dmi_check_system
will return immediately if we have a successful match.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Sat, 9 Jul 2011 19:41:46 +0000 (12:41 -0700)]
Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
This reduces amount #ifdeds in the code.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
David Jander [Sat, 9 Jul 2011 19:41:46 +0000 (12:41 -0700)]
Input: gpio_keys - add support for device-tree platform data
This patch enables fetching configuration data, which is normally provided
via platform_data, from the device-tree instead.
If the device is configured from device-tree data, the platform_data struct
is not used, and button data needs to be allocated dynamically. Big part of
this patch deals with confining pdata usage to the probe function, to make
this possible.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Edwin van Vliet [Sun, 10 Jul 2011 23:07:28 +0000 (16:07 -0700)]
Input: aiptek - remove double define
Constant AIPTEK_TOOL_BUTTON_PEN_MODE was defined twice.
Signed-off-by: Edwin van Vliet <edwin@cheatah.nl>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Sat, 9 Jul 2011 19:32:56 +0000 (12:32 -0700)]
Input: synaptics - set minimum coordinates as reported by firmware
Newer Synaptics firmware allows to query minimum coordinates reported by
the device, let's use this data.
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Daniel Kurtz [Thu, 7 Jul 2011 05:57:39 +0000 (22:57 -0700)]
Input: synaptics - process button bits in AGM packets
AGM packets contain valid button bits, too.
This patch refactors packet processing to parse button bits in AGM packets.
However, they aren't actually used or reported.
The point is to more completely process AGM packets,
and prepare for future patches that may actually use AGM packet button bits.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Daniel Kurtz [Thu, 7 Jul 2011 05:42:52 +0000 (22:42 -0700)]
Input: synaptics - rename set_slot to be more descriptive
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Daniel Kurtz [Thu, 7 Jul 2011 05:39:14 +0000 (22:39 -0700)]
Input: synaptics - fuzz position for touchpad with reduced filtering
Synaptics touchpads indicate via a capability bit when they perform reduced
filtering on position data. In such a case, use a non-zero fuzz value.
Fuzz = 8 was chosen empirically by observing the raw position data
reported by a clickpad indicating it had reduced filtering.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Daniel Kurtz [Thu, 7 Jul 2011 05:27:47 +0000 (22:27 -0700)]
Input: synaptics - set resolution for MT_POSITION_X/Y axes
Set resolution for MT_POSITION_X and MT_POSITION_Y to match ABS_X and
ABS_Y, respectively.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Thu, 7 Jul 2011 01:05:43 +0000 (18:05 -0700)]
Input: wacom - cleanup a return value for the old Bamboo
The old code may call input_sync() without sending any other events.
While it will be suppressed by the input core not calling it at all
is still cheaper.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Thu, 7 Jul 2011 01:05:42 +0000 (18:05 -0700)]
Input: wacom - update Graphire4 and old Bamboo tablet buttons
Bamboo touch sets BTN_BACK, BTN_FORWARD, BTN_LEFT, and BTN_RIGHT
as the default button events for tablet buttons. Change Graphire4
and old Bamboo to the same settings.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Thu, 7 Jul 2011 01:05:41 +0000 (18:05 -0700)]
Input: wacom - add serial number for Graphire4 and old Bamboo
With the removal of BTN_TOOL_FINGER for tablet buttons and
expresskeys, serial number is needed to distingush if the
events were from a regular tool (stylus, eraser, or mouse)
or the attribures (buttons, strips, or wheels) on the tablet
since there are overlapped events between the tools and the
tablet attributes.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Thu, 7 Jul 2011 01:05:41 +0000 (18:05 -0700)]
Input: wacom - remove BTN_TOOL_FINGER for pad
BTN_TOOL_FINGER was designed to indicate a single finger touch.
Remove the lines that borrowed this type for expresskeys and
tablet buttons.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Chris Hudson [Thu, 7 Jul 2011 01:36:51 +0000 (18:36 -0700)]
Input: add support for Kionix KXTJ9 accelerometer
Signed-off-by: Chris Hudson <chudson@kionix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Simon Budig [Tue, 5 Jul 2011 02:56:01 +0000 (19:56 -0700)]
Input: add guarding parentheses to macros
Put parentheses around macro argument uses. This avoids pitfalls
for the programmer, where the argument expansion does not give the
expected result, for example:
ioctl (fd, EVIOCGABS (have_mt ? ABS_MT_POSITION_X : ABS_X), &abs);
Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Wolfram Sang [Tue, 5 Jul 2011 02:22:01 +0000 (19:22 -0700)]
Input: wm97xx - mark channels which need pen_down
Currently, battery drivers also use poll_sample() provided by the
wm97xx-core but this code always checks if the pen is down. Mark the
channels which really need this (i.e. for the touchscreen) with the
PEN_DOWN bit, and skip the checks otherwise. Now, the battery channels
can always be read.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Wolfram Sang [Tue, 5 Jul 2011 02:22:00 +0000 (19:22 -0700)]
Input: wm97xx - refactor channel selection in poll_sample()
The current implementation of poll_sample() has the problem that one of
its arguments, the channel to be selected, differs from wm9713 to other
variants. This parameter gets passed to the (currently unused)
mach-specific functions pre_sample() and post_sample() which thus have
to deal with codec-specific differences. Refactor the routine so that
the argument to poll_sample() is generic for all codecs and do necessary
conversions only in the codec-specific driver. The outcome even uses
less code and removes the non-standard use of the PEN_DOWN bit to mark
the AUX-channels.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Wolfram Sang [Tue, 5 Jul 2011 02:22:00 +0000 (19:22 -0700)]
Input: wm97xx - remove redundant define
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Stefano Stabellini [Tue, 5 Jul 2011 02:22:00 +0000 (19:22 -0700)]
Input: xen-kbdfront - enable driver for HVM guests
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Chris Moeller [Tue, 5 Jul 2011 02:21:59 +0000 (19:21 -0700)]
Input: xpad - enable rumble support for XBox360 Wireless Controllers
This patch implements rumble support for XBox360 Wireless Controllers.
Signed-off-by: Chris Moeller <kode54@gmail.c>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Mon, 4 Jul 2011 13:34:48 +0000 (06:34 -0700)]
Input: sh_keysc - fix compile warning
The "#if" above should really be an "#ifdef" to avoid this warning:
CC drivers/input/keyboard/sh_keysc.o
drivers/input/keyboard/sh_keysc.c:294:5: warning: "CONFIG_PM_SLEEP" is
not defined
Reported-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Iiro Valkonen [Mon, 4 Jul 2011 10:16:25 +0000 (03:16 -0700)]
Input: atmel_mxt_ts - handle objects with multiple instances correctly
Handle the objects with multiple instances correctly when the configuration
data is loaded.
Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Iiro Valkonen [Mon, 4 Jul 2011 10:08:25 +0000 (03:08 -0700)]
Input: atmel_mxt_ts - update object list
Update the object list to include new objects, and add unique identifiers
so we can distinguish between old & new generation of the same object.
Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jiejing Zhang [Wed, 29 Jun 2011 08:28:21 +0000 (01:28 -0700)]
Input: mpr121 - improve sensibility of touch key
The Quick Charge bit in Electrode conf register should be set in init
function. This bit was missed in chip's document, which may cause touch
controller charge too slow to generate an interrupt.
Also, adjust the default vlaue of touch and release threshold
to make touch key more sensitive, this fix touch may not sensitive
after setup with plastic case.
Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Joseph Lai [Mon, 27 Jun 2011 20:26:53 +0000 (13:26 -0700)]
Input: add a driver to support InvenSense mpu3050 gyroscope chip
This driver is registered as an input device. An IRQ is required in this
basic driver configuration.
Signed-off-by: Joseph Lai <joseph_lai@wistron.com>
[Cleaned up PM_RUNTIME defines]
Signed-off-by: Alan Cox <alan@linux.intel.com>
[dtor@mail.ru: consolidated PM methods, some code rearrangement]
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Hans-Christian Egtvedt [Wed, 29 Jun 2011 07:13:26 +0000 (00:13 -0700)]
Input: update author email for gpio_mouse, at32psif, and atmel-wm97xx
This patch updates the email address of the gpio_mouse, at32psif, and
atmel-wm97xx drivers supported by me to an email account I will use on a more
regular basis in the future.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 28 Jun 2011 21:23:30 +0000 (14:23 -0700)]
Input: gpio_keys - fix a memory leak
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Igor Grinberg [Mon, 27 Jun 2011 20:06:27 +0000 (13:06 -0700)]
Input: ads7846 - cleanup GPIO initialization
Use gpio_request_one() instead of multiple gpiolib calls.
This also simplifies error handling a bit.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Mon, 27 Jun 2011 19:57:58 +0000 (12:57 -0700)]
Input: wacom - add 3 new models - 6A, 6B, and 97
Tested-by: Alex Tervoort <alex.tervoort@gmail.com> for 6A
Signed-off-by: David Foley <favux.is@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Mon, 27 Jun 2011 19:57:58 +0000 (12:57 -0700)]
Input: wacom - Wacom Bamboo Pen D4 has 1024 pressure levels
D4 has 1024, not 512, pressure levels.
Reported-by: David Foley <favux.is@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
David Jander [Thu, 23 Jun 2011 08:30:09 +0000 (01:30 -0700)]
Input: gpio_keys - move to late_initcall
Initialize gpio_keys driver at late_initcall level, to give it a chance to
work with GPIO expanders that might not be ready yet if we initialize the
driver at module_init time.
This is strictly a band-aid until there is a better way to specify
inter-device dependencies.
Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Mon, 27 Jun 2011 19:42:12 +0000 (12:42 -0700)]
Input: tnetv107x-ts - fix MODULE_ALIAS
Remove the space between "platform:" prefix and the driver name.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Mon, 27 Jun 2011 19:38:43 +0000 (12:38 -0700)]
Input: tnetv107x-keypad - fix MODULE_ALIAS
Remove the space between "platform:" prefix and the driver name.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jesper Juhl [Mon, 27 Jun 2011 18:59:43 +0000 (11:59 -0700)]
Input: remove unneeded version.h includes
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/input/.
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Eric Miao [Wed, 22 Jun 2011 08:02:50 +0000 (01:02 -0700)]
Input: add support for mma8450 accelerometer
Signed-off-by: Sammy He <r62914@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Aristeu Rozanski [Wed, 22 Jun 2011 08:17:17 +0000 (01:17 -0700)]
Input: wacom - use only one interface with DTU-2231
The Wacom DTU-2231 tablet has two interfaces on its default configuration
and both have HID class, leading to the creation of two input devices
instead of one. Only the first one is used, so filter out the second.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ping Cheng [Wed, 22 Jun 2011 08:02:51 +0000 (01:02 -0700)]
Input: wacom - Cintiq 21UX2 does not have menu strips
So don't set ABS_RX/ABS_RY for them.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Magnus Hörlin [Tue, 21 Jun 2011 21:40:30 +0000 (14:40 -0700)]
Input: xpad - add support for two more dance pads and a guitar
Signed-off-by: Magnus Hörlin <magnus@alefors.se>
Reviewed-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
David Jander [Tue, 21 Jun 2011 21:26:18 +0000 (14:26 -0700)]
Input: gpio_keys - switch to using threaded IRQs
Use a threaded interrupt handler in order to permit the handler to use
a GPIO driver that causes things like I2C transactions being done inside
the handler context.
Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Leigh Brown [Tue, 21 Jun 2011 11:25:21 +0000 (04:25 -0700)]
Input: lm8323 - use oneshot level triggered interrupts
According to the data sheet the interrupt should be level rather than
edge triggered. This fixes the issue of the Nokia N810 keypad stopping
responding if multiple key events occur in quick succession.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Felipe Balbi [Tue, 21 Jun 2011 11:20:57 +0000 (04:20 -0700)]
Input: lm8323 - convert to threaded IRQ
There's no need for that workqueue anymore. Get rid of it and move to
threaded IRQs instead.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Wolfram Sang [Tue, 21 Jun 2011 11:20:57 +0000 (04:20 -0700)]
Input: qt1070 - remove obsolete cleanup for clientdata
A few new i2c-drivers came into the kernel which clear the clientdata
pointer on exit or error. This is not required anymore since the core
will do it for us.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Linus Torvalds [Tue, 21 Jun 2011 03:25:46 +0000 (20:25 -0700)]
Linux 3.0-rc4
Linus Torvalds [Tue, 21 Jun 2011 03:13:49 +0000 (20:13 -0700)]
vfs: i_state needs to be 'unsigned long' for now
Commit
13e12d14e2dc ("vfs: reorganize 'struct inode' layout a bit")
moved things around a bit changed i_state to be unsigned int instead of
unsigned long. That was to help structure layout for the 64-bit case,
and shrink 'struct inode' a bit (admittedly that only happened when
spinlock debugging was on and i_flags didn't pack with i_lock).
However, Meelis Roos reports that this results in unaligned exceptions
on sprc, and it turns out that the bit-locking primitives that we use
for the I_NEW bit want to use the bitops. Which want 'unsigned long',
not 'unsigned int'.
We really should fix the bit locking code to not have that kind of
requirement, but that's a much bigger change. So for now, revert that
field back to 'unsigned long' (but keep the other re-ordering changes
from the commit that caused this).
Andi points out that we have played games with this in 'struct page', so
it's solvable with other hacks too, but since right now the struct inode
size advantage only happens with some rare config options, it's not
worth fighting.
It _would_ be worth fixing the bitlocking code, though. Especially
since there is no type safety in the bitlocking code (this never caused
any warnings, and worked fine on x86-64, because the bitlocks take a
'void *' and x86-64 doesn't care that deeply about alignment). So it's
currently a very easy problem to trigger by mistake and never notice.
Reported-by: Meelis Roos <mroos@linux.ee>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 21 Jun 2011 03:12:48 +0000 (20:12 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms/r6xx+: voltage fixes
drm/nouveau: drop leftover debugging
drm/radeon: avoid warnings from r600/eg irq handlers on powered off card.
drm/radeon/kms: add missing param for dce3.2 DP transmitter setup
drm/radeon/kms/atom: fix duallink on some early DCE3.2 cards
drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync
drm/nv50/disp: fix gamma with page flipping overlay turned on
drm/nouveau/pm: Prevent overflow in nouveau_perf_init()
drm/nouveau: fix big-endian switch
Linus Torvalds [Tue, 21 Jun 2011 03:11:34 +0000 (20:11 -0700)]
Merge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm
* 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
msm: timer: Fix DGT rate on 8960 and 8660
msm: timer: compensate for timer shift in msm_read_timer_count
msm: timer: Fix SMP build error
Linus Torvalds [Tue, 21 Jun 2011 03:10:52 +0000 (20:10 -0700)]
Merge branch 'for-2.6.40' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux:
nfsd4: fix break_lease flags on nfsd open
nfsd: link returns nfserr_delay when breaking lease
nfsd: v4 support requires CRYPTO
nfsd: fix dependency of nfsd on auth_rpcgss
Linus Torvalds [Tue, 21 Jun 2011 03:10:18 +0000 (20:10 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
pxa168_eth: fix race in transmit path.
ipv4, ping: Remove duplicate icmp.h include
netxen: fix race in skb->len access
sgi-xp: fix a use after free
hp100: fix an skb->len race
netpoll: copy dev name of slaves to struct netpoll
ipv4: fix multicast losses
r8169: fix static initializers.
inet_diag: fix inet_diag_bc_audit()
gigaset: call module_put before restart of if_open()
farsync: add module_put to error path in fst_open()
net: rfs: enable RFS before first data packet is received
fs_enet: fix freescale FCC ethernet dp buffer alignment
netdev: bfin_mac: fix memory leak when freeing dma descriptors
vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support
caif: Bugfix - XOFF removed channel from caif-mux
tun: teach the tun/tap driver to support netpoll
dp83640: drop PHY status frames in the driver.
dp83640: fix phy status frame event parsing
phylib: Allow BCM63XX PHY to be selected only on BCM63XX.
...
Linus Torvalds [Tue, 21 Jun 2011 03:09:15 +0000 (20:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
devcgroup_inode_permission: take "is it a device node" checks to inlined wrapper
fix comment in generic_permission()
kill obsolete comment for follow_down()
proc_sys_permission() is OK in RCU mode
reiserfs_permission() doesn't need to bail out in RCU mode
proc_fd_permission() is doesn't need to bail out in RCU mode
nilfs2_permission() doesn't need to bail out in RCU mode
logfs doesn't need ->permission() at all
coda_ioctl_permission() is safe in RCU mode
cifs_permission() doesn't need to bail out in RCU mode
bad_inode_permission() is safe from RCU mode
ubifs: dereferencing an ERR_PTR in ubifs_mount()
Alex Deucher [Mon, 20 Jun 2011 17:00:31 +0000 (13:00 -0400)]
drm/radeon/kms/r6xx+: voltage fixes
0xff01 is not an actual voltage value, but a flag
for the driver. If the power state as that value,
skip setting the voltage.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Stephen Boyd [Thu, 21 Apr 2011 23:09:11 +0000 (23:09 +0000)]
msm: timer: Fix DGT rate on 8960 and 8660
The DGT runs at 27 MHz divided by 4 on 8660 and 8960.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Richard Cochran [Sun, 19 Jun 2011 21:48:06 +0000 (21:48 +0000)]
pxa168_eth: fix race in transmit path.
Because the socket buffer is freed in the completion interrupt, it is not
safe to access it after submitting it to the hardware.
Cc: stable@kernel.org
Cc: Sachin Sanap <ssanap@marvell.com>
Cc: Zhangfei Gao <zgao6@marvell.com>
Cc: Philip Rakity <prakity@marvell.com>
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Sun, 19 Jun 2011 22:31:20 +0000 (22:31 +0000)]
ipv4, ping: Remove duplicate icmp.h include
Remove the duplicate inclusion of net/icmp.h from net/ipv4/ping.c
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 19 Jun 2011 20:26:15 +0000 (20:26 +0000)]
netxen: fix race in skb->len access
As soon as skb is given to hardware, TX completion can free skb under
us.
Therefore, we should update dev stats before kicking the device.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 20 Jun 2011 16:01:33 +0000 (09:01 -0700)]
Merge branch 'stable/bug.fixes' of git://git./linux/kernel/git/konrad/xen
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/setup: Fix for incorrect xen_extra_mem_start.
xen: When calling power_off, don't call the halt function.
xen: Fix compile warning when CONFIG_SMP is not defined.
xen: support CONFIG_MAXSMP
xen: partially revert "xen: set max_pfn_mapped to the last pfn mapped"
Linus Torvalds [Mon, 20 Jun 2011 15:59:46 +0000 (08:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: sh_keysc - 8x8 MODE_6 fix
Input: omap-keypad - add missing input_sync()
Input: evdev - try to wake up readers only if we have full packet
Input: properly assign return value of clamp() macro.
Linus Torvalds [Mon, 20 Jun 2011 15:58:53 +0000 (08:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/btrfs-unstable
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: avoid delayed metadata items during commits
btrfs: fix uninitialized return value
btrfs: fix wrong reservation when doing delayed inode operations
btrfs: Remove unused sysfs code
btrfs: fix dereference of ERR_PTR value
Btrfs: fix relocation races
Btrfs: set no_trans_join after trying to expand the transaction
Btrfs: protect the pending_snapshots list with trans_lock
Btrfs: fix path leakage on subvol deletion
Btrfs: drop the delalloc_bytes check in shrink_delalloc
Btrfs: check the return value from set_anon_super
Linus Torvalds [Mon, 20 Jun 2011 15:58:07 +0000 (08:58 -0700)]
Merge branch 'kvm-updates/3.0' of git://git./virt/kvm/kvm
* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Fix register corruption in pvclock_scale_delta
KVM: MMU: fix opposite condition in mapping_level_dirty_bitmap
KVM: VMX: do not overwrite uptodate vcpu->arch.cr3 on KVM_SET_SREGS
KVM: MMU: Fix build warnings in walk_addr_generic()
Al Viro [Sun, 19 Jun 2011 17:01:04 +0000 (13:01 -0400)]
devcgroup_inode_permission: take "is it a device node" checks to inlined wrapper
inode_permission() calls devcgroup_inode_permission() and almost all such
calls are _not_ for device nodes; let's at least keep the common path
straight...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>