OSDN Git Service
Xin Long [Thu, 14 Dec 2017 16:41:26 +0000 (00:41 +0800)]
sctp: implement generate_ftsn for sctp_stream_interleave
generate_ftsn is added as a member of sctp_stream_interleave, used to
create fwdtsn or ifwdtsn chunk according to abandoned chunks, called
in sctp_retransmit and sctp_outq_sack.
sctp_generate_iftsn works for ifwdtsn, and sctp_generate_fwdtsn is
still used for making fwdtsn.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 14 Dec 2017 16:41:25 +0000 (00:41 +0800)]
sctp: add basic structures and make chunk function for ifwdtsn
sctp_ifwdtsn_skip, sctp_ifwdtsn_hdr and sctp_ifwdtsn_chunk are used to
define and parse I-FWD TSN chunk format, and sctp_make_ifwdtsn is a
function to build the chunk.
The I-FORWARD-TSN Chunk Format is defined in section 2.3.1 of RFC8260.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 14 Dec 2017 23:57:58 +0000 (15:57 -0800)]
net: phy: phylink: Handle NULL fwnode_handle
Unlike the various of_* routines to fetch properties, fwnode_* routines can
have an early check against a NULL fwnode_handle reference which makes them
return -EINVAL (see fwnode_call_int_op), thus making it virtually impossible to
differentiate what type of error is going on.
Have an early check in phylink_register_sfp() so we can keep proceeding with
the initialization, there is not much we can do without a valid fwnode_handle
except return early and treat this similarly to -ENOENT.
Fixes:
8fa7b9b6af25 ("phylink: convert to fwnode")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Thu, 14 Dec 2017 18:55:50 +0000 (19:55 +0100)]
qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect
It has been reported that the dummy byte we add to avoid
ZLPs can be forwarded by the modem to the PGW/GGSN, and that
some operators will drop the connection if this happens.
In theory, QMI devices are based on CDC ECM and should as such
both support ZLPs and silently ignore the dummy byte. The latter
assumption failed. Let's test out the first.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 14 Dec 2017 11:40:21 +0000 (11:40 +0000)]
net: alteon: acenic: clean up indentation issue
There is a hunk of code that is incorrectly indented with spaces
and rather than a tab. Clean this up.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 18:23:22 +0000 (13:23 -0500)]
Merge branch 'sfp-SFF-module-support'
Russell King says:
====================
Add SFF module support
Add support for SFF modules. SFF modules are similar to SFP modules,
but they have fewer control signals, and are soldered down rather than
pluggable.
They also have different IDs in the EEPROM to identify as soldered down
SFF modules.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Thu, 14 Dec 2017 10:27:47 +0000 (10:27 +0000)]
sfp: add sff module support
Add support for SFF modules, which are soldered down SFP modules.
These have a different phys_id value, and also have the present and
rate select signals omitted compared with their socketed counter-parts.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Thu, 14 Dec 2017 10:27:42 +0000 (10:27 +0000)]
dt-bindings: add sff,sff binding for SFP support
Add "sff,sff" for SFF module support with SFP. These have a different
phys_id value, and also have the present and rate select signals omitted
compared with their socketed counter-parts.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 17:48:46 +0000 (12:48 -0500)]
Merge branch 'nfp-fix-rtsym-and-XPB-register-handling-in-debug-dump'
Simon Horman says:
====================
nfp: fix rtsym and XPB register handling in debug dump
this series resolves two problems in the recently added debug dump facility.
* Correctly handle reading absolute rtysms
* Correctly handle special-case PB register reads
These fixes are for code only present in net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Carl Heymann [Thu, 14 Dec 2017 09:50:26 +0000 (10:50 +0100)]
nfp: fix XPB register reads in debug dump
For XPB registers reads, some island IDs require special handling (e.g.
ARM island), which is already taken care of in nfp_xpb_readl(), so use
that instead of a straight CPP read.
Without this fix all "xpbm:ArmIsldXpbmMap.*" registers are reported as
0xffffffff. It has also been observed to cause a system reboot.
With this fix correct values are reported, none of which are 0xffffffff.
The values may be read using ethtool debug level 2.
# ethtool -W <netdev> 2
# ethtool -w <netdev> data dump.dat
Fixes:
0e6c4955e149 ("nfp: dump CPP, XPB and direct ME CSRs")
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Carl Heymann [Thu, 14 Dec 2017 09:50:25 +0000 (10:50 +0100)]
nfp: fix absolute rtsym handling in debug dump
In TLV-based ethtool debug dumps, don't do a CPP read for absolute
rtsyms, use the addr field in the symbol table directly as the value.
Without this fix rtsym gro_release_ring_0 is 4 bytes of zeros.
With this fix the correct value, 0x0000004a 0x00000000 is reported.
The values may be read using ethtool debug level 2.
# ethtool -W <netdev> 2
# ethtool -w <netdev> data dump.dat
Fixes:
e1e798e3fd93 ("nfp: dump rtsyms")
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 17:34:01 +0000 (12:34 -0500)]
Merge branch 'erspan-version-2'
William Tu says:
====================
ERSPAN version 2 (type III) support
ERSPAN has two versions, v1 (type II) and v2 (type III). This patch
series add support for erspan v2 based on existing erspan v1
implementation. The first patch refactors the existing erspan v1's
header structure, making it extensible to put additional v2's header.
The second and third patch introduces erspan v2's implementation to
ipv4 and ipv6 erspan, for both native mode and collect metadata mode.
Finally, test cases are added under the samples/bpf.
Note:
ERSPAN version 2 has many features and this patch does not implement
all. One major use case of version 2 over version 1 is its timestamp
and direction. So the traffic collector is able to distinguish the
mirrorred traffic better. Other features such as SGT (security group
tag), FT (frame type) for carrying non-ethernet packet, and optional
subheader are not implemented yet.
Example commandline for ERSPAN version 2:
ip link add dev ip6erspan11 type ip6erspan seq key 102 \
local fc00:100::2 remote fc00:100::1 \
erspan_ver 2 erspan_dir 1 erspan_hwid 17
The corresponding iproute2 patch:
https://marc.info/?l=linux-netdev&m=
151321141525106&w=2
William Tu (4):
net: erspan: refactor existing erspan code
net: erspan: introduce erspan v2 for ip_gre
ip6_gre: add erspan v2 support
samples/bpf: add erspan v2 sample code
include/net/erspan.h | 152 ++++++++++++++++++++++++++++++++++++++---
include/net/ip6_tunnel.h | 3 +
include/net/ip_tunnels.h | 5 +-
include/uapi/linux/if_ether.h | 1 +
include/uapi/linux/if_tunnel.h | 3 +
net/ipv4/ip_gre.c | 124 +++++++++++++++++++++++++++------
net/ipv6/ip6_gre.c | 139 +++++++++++++++++++++++++++++++------
net/openvswitch/flow_netlink.c | 8 +--
samples/bpf/tcbpf2_kern.c | 77 ++++++++++++++++++---
samples/bpf/test_tunnel_bpf.sh | 38 ++++++++---
10 files changed, 472 insertions(+), 78 deletions(-)
--
A simple script to test it:
set -ex
function cleanup() {
set +ex
ip netns del ns0
ip link del ip6erspan11
ip link del veth1
}
function main() {
trap cleanup 0 2 3 9
ip netns add ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns ns0
# non-namespace
ip addr add dev veth1 fc00:100::2/96
if [ "$1" == "v1" ]; then
echo "create IP6 ERSPAN v1 tunnel"
ip link add dev ip6erspan11 type ip6erspan seq key 102 \
local fc00:100::2 remote fc00:100::1 \
erspan 123 erspan_ver 1
else
echo "create IP6 ERSPAN v2 tunnel"
ip link add dev ip6erspan11 type ip6erspan seq key 102 \
local fc00:100::2 remote fc00:100::1 \
erspan_ver 2 erspan_dir 1 erspan_hwid 17
fi
ip addr add dev ip6erspan11 fc00:200::2/96
ip addr add dev ip6erspan11 10.10.200.2/24
# namespace: ns0
ip netns exec ns0 ip addr add fc00:100::1/96 dev veth0
if [ "$1" == "v1" ]; then
ip netns exec ns0 \
ip link add dev ip6erspan00 type ip6erspan seq key 102 \
local fc00:100::1 remote fc00:100::2 \
erspan 123 erspan_ver 1
else
ip netns exec ns0 \
ip link add dev ip6erspan00 type ip6erspan seq key 102 \
local fc00:100::1 remote fc00:100::2 \
erspan_ver 2 erspan_dir 1 erspan_hwid 7
fi
ip netns exec ns0 ip addr add dev ip6erspan00 fc00:200::1/96
ip netns exec ns0 ip addr add dev ip6erspan00 10.10.200.1/24
ip link set dev veth1 up
ip link set dev ip6erspan11 up
ip netns exec ns0 ip link set dev ip6erspan00 up
ip netns exec ns0 ip link set dev veth0 up
}
main $1
ping6 -c 1 fc00:100::1 || true
ping -c 3 10.10.200.1
exit 0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 14 Dec 2017 00:38:58 +0000 (16:38 -0800)]
samples/bpf: add erspan v2 sample code
Extend the existing tests for ipv4 ipv6 erspan version 2.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 14 Dec 2017 00:38:57 +0000 (16:38 -0800)]
ip6_gre: add erspan v2 support
Similar to support for ipv4 erspan, this patch adds
erspan v2 to ip6erspan tunnel.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 14 Dec 2017 00:38:56 +0000 (16:38 -0800)]
net: erspan: introduce erspan v2 for ip_gre
The patch adds support for erspan version 2. Not all features are
supported in this patch. The SGT (security group tag), GRA (timestamp
granularity), FT (frame type) are set to fixed value. Only hardware
ID and direction are configurable. Optional subheader is also not
supported.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Thu, 14 Dec 2017 00:38:55 +0000 (16:38 -0800)]
net: erspan: refactor existing erspan code
The patch refactors the existing erspan implementation in order
to support erspan version 2, which has additional metadata. So, in
stead of having one 'struct erspanhdr' holding erspan version 1,
breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 17:26:13 +0000 (12:26 -0500)]
Merge branch 'nfp-ethtool-flash-updates'
Jakub Kicinski says:
====================
nfp: ethtool flash updates
Dirk says:
This series adds the ability to update the control FW with ethtool.
It should be noted that the locking scheme here is to release the RTNL
lock before the flashing operation and to take it again afterwards to
ensure consistent state from the core code point of view. In this time,
we take a reference to the device to prevent the device being freed
while its being flashed.
This provides protection for the device being flashed while at the same
time not holding up any networking related functions which would
otherwise be locked out due to RTNL being held.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Wed, 13 Dec 2017 22:45:02 +0000 (14:45 -0800)]
nfp: implement firmware flashing
Firmware flashing takes around 60s (specified to not take more than
70s). Prevent hogging the RTNL lock in this time and make use of the
longer timeout for the NSP command. The timeout is set to 2.5 * 70
seconds.
We only allow flashing the firmware from reprs or PF netdevs. VFs do not
have an app reference.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Wed, 13 Dec 2017 22:45:01 +0000 (14:45 -0800)]
nfp: extend NSP infrastructure for configurable timeouts
The firmware flashing NSP operation takes longer to execute than the
current default timeout. We need a mechanism to set a longer timeout for
some commands. This patch adds the infrastructure to this.
The default timeout is still 30 seconds.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 16:36:54 +0000 (11:36 -0500)]
Merge branch 'ipvlan-packet-scrub'
Mahesh Bandewar says:
====================
ipvlan: packet scrub
While crossing namespace boundary IPvlan aggressively scrubs packets.
This is creating problems. First thing is that scrubbing changes the
packet type in skb meta-data to PACKET_HOST. This causes erroneous
packet delivery when dev_forward_skb() has already marked the packet
type as OTHER_HOST.
On the egress side scrubbing just before calling dev_queue_xmit()
creates another set of problems. Scrubbing remove skb->sk so the
prio update gets missed and more seriously, socket back-pressure
fails making TSQ not function correctly.
The first patch in the series just reverts the earlier change which
was adding a mac-check, but that is unnecessary if packet_type that
dev_forward_skb() has set is honored. The second path removes two of
the scrubs which are causing problems described above.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Wed, 13 Dec 2017 22:40:26 +0000 (14:40 -0800)]
ipvlan: remove excessive packet scrubbing
IPvlan currently scrubs packets at every location where packets may be
crossing namespace boundary. Though this is desirable, currently IPvlan
does it more than necessary. e.g. packets that are going to take
dev_forward_skb() path will get scrubbed so no point in scrubbing them
before forwarding. Another side-effect of scrubbing is that pkt-type gets
set to PACKET_HOST which overrides what was already been set by the
earlier path making erroneous delivery of the packets.
Also scrubbing packets just before calling dev_queue_xmit() has detrimental
effects since packets lose skb->sk and because of that miss prio updates,
incorrect socket back-pressure and would even break TSQ.
Fixes:
b93dd49c1a35 ('ipvlan: Scrub skb before crossing the namespace boundary')
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Wed, 13 Dec 2017 22:40:23 +0000 (14:40 -0800)]
Revert "ipvlan: add L2 check for packets arriving via virtual devices"
This reverts commit
92ff42645028fa6f9b8aa767718457b9264316b4.
Even though the check added is not that taxing, it's not really needed.
First of all this will be per packet cost and second thing is that the
eth_type_trans() already does this correctly. The excessive scrubbing
in IPvlan was changing the pkt-type skb metadata of the packet which
made it necessary to re-check the mac. The subsequent patch in this
series removes the faulty packet-scrub.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 16:10:27 +0000 (11:10 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-12-15
1) Currently we can add or update socket policies, but
not clear them. Support clearing of socket policies
too. From Lorenzo Colitti.
2) Add documentation for the xfrm device offload api.
From Shannon Nelson.
3) Fix IPsec extended sequence numbers (ESN) for
IPsec offloading. From Yossef Efraim.
4) xfrm_dev_state_add function returns success even for
unsupported options, fix this to fail in such cases.
From Yossef Efraim.
5) Remove a redundant xfrm_state assignment.
From Aviv Heller.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 15 Dec 2017 01:59:40 +0000 (17:59 -0800)]
net: dsa: bcm_sf2: Update compatible string for 7278B0
Update the compatible string and Device Tree binding document for
7278B0.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 15:55:35 +0000 (10:55 -0500)]
Merge branch 'hnx3-vf'
Salil Mehta says:
====================
Hisilicon Network Subsystem 3 VF Ethernet Driver
This patch-set contains the support of the HNS3 (Hisilicon Network Subsystem 3)
Virtual Function Ethernet driver for hip08 family of SoCs. The Physical Function
driver is already part of the Linux mainline.
This VF driver has its Hardware Compatibility Layer and has commom/unified ENET
layer/client/ethtool code with the PF driver. It also has support of mailbox to
communicate with the HNS3 PF driver. The basic architecture of VF driver is
derivative of the PF driver. Just like PF driver, this driver is also PCI
Express based.
This driver is the ongoing development work and HNS3 VF Ethernet driver would be
incrementally enhanced with more new features.
High Level Architecture:
[ Ethtool ]
|
[ Ethernet Client ] ... [ RoCE Client ]
| |
[ HNAE Device ] |________
| | |
--------------------------------------------- |
|
[ HNAE3 Framework (Register/unregister) ] |
|
--------------------------------------------- |
| |
[ VF HCLGE Layer ] |
| | |
| | |
| | |
| [ VF Mailbox (To PF via IMP) ] |
| | |
[ IMP command Interface ] [ IMP command Interface ]
| |
| |
(A B O V E R U N S O N G U E S T S Y S T E M)
-------------------------------------------------------------
Q E M U / V F I O / K V M (on Host System)
-------------------------------------------------------------
HIP08 H A R D W A R E (limited to VF by SMMU)
[ IMP/Mgmt Processor (hardware common to system/cmd based) ]
Fig 1. HNS3 Virtual Function Driver
[ dcbnl ] [ Ethtool ]
| |
[ Ethernet Client ] [ ODP/UIO Client ] . . .[ RoCE Client ]
|_____________________| |
| _________|
[ HNAE Device ] | |
| | |
--------------------------------------------- |
|
[ HNAE3 Framework (Register/unregister) ] |
|
--------------------------------------------- |
| |
[ HCLGE Layer ] |
________________|_________________ |
| | | |
[ DCB ] | | |
| | | |
[ Scheduler/Shaper ] [ MDIO ] [ PF Mailbox ] |
| | | |
|________________|_________________| |
| |
[ IMP command Interface ] [ IMP command Interface ]
----------------------------------------------------------------
HIP08 H A R D W A R E
[ IMP/Mgmt Processor (hardware common to system/cmd based) ]
Fig 2. Existing HNS3 PF Driver (added with mailbox)
Change Log Summary:
Patch V4: Addressed SPDX related comment by Philippe Ombredanne
Patch V3: Addressed SPDX change requested by Philippe Ombredanne
Patch V2: 1. Addressed some comments by David Miller.
2. Addressed some internal comments on various patches
Patch V1: Initial Submit
====================
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:09 +0000 (18:03 +0000)]
net: hns3: Add mailbox interrupt handling to PF driver
All PF mailbox events are conveyed through a common interrupt
(vector 0). This interrupt vector is shared by reset and mailbox.
This patch adds the handling of mailbox interrupt event and its
deferred processing in context to a separate mailbox task.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:08 +0000 (18:03 +0000)]
net: hns3: Change PF to add ring-vect binding & resetQ to mailbox
This patch is required to support ring-vector binding and reset
of TQPs requested by the VF driver to the PF driver. Mailbox
handler is added with corresponding VF commands/messages to
handle the request.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:07 +0000 (18:03 +0000)]
net: hns3: Add mailbox support to PF driver
Command queue provides the provision of Mailbox command which
can be used for communication between PF and VF. PF handles
messages from various VFs for fetching various information like,
queue, vlan, link status related etc. It also handles the request
from various VFs to perform certain privileged operations.
This patch adds the support of a message handler for handling
such various command requests from VF.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:06 +0000 (18:03 +0000)]
net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC
Most of the NAPI handling interface, skb buffer management,
management of the RX/TX descriptors, ethool interface etc.
has quite a bit of code which is common to VF and PF driver.
This patch makes the exisitng PF's HNS3 ENET driver as the
common ENET driver for both Virtual & Physical Function. This
will help in reduction of redundancy and better management of
code.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:05 +0000 (18:03 +0000)]
net: hns3: Add HNS3 VF driver to kernel build framework
This patch introduces the new Makefiles and updates existing
Makefiles required to build the HNS3 Virtual Function driver.
This also updates the Kconfig for introduction of new menuconfig
entries related to VF driver.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:04 +0000 (18:03 +0000)]
net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support
This patch adds the support of hardware compatibiltiy layer to the
HNS3 VF Driver. This layer implements various {set|get} operations
over MAC address for a virtual port, RSS related configuration,
fetches the link status info from PF, does various VLAN related
configuration over the virtual port, queries the statistics from
the hardware etc.
This layer can directly interact with hardware through the
IMP(Integrated Mangement Processor) interface or can use mailbox
to interact with the PF driver.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:03 +0000 (18:03 +0000)]
net: hns3: Add mailbox support to VF driver
This patch adds the support of the mailbox to the VF driver. The
mailbox shall be used as an interface to communicate with the
PF driver for various purposes like {set|get} MAC related
operations, reset, link status etc. The mailbox supports both
synchronous and asynchronous command send to PF driver.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 14 Dec 2017 18:03:02 +0000 (18:03 +0000)]
net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface
This patch adds support of command interface for communication with
the IMP(Integrated Management Processor) for HNS3 Virtual Function
Driver.
Each VF has support of CQP(Command Queue Pair) ring interface.
Each CQP consis of send queue CSQ and receive queue CRQ.
There are various commands a VF may support, like to query frimware
version, TQP management, statistics, interrupt related, mailbox etc.
This also contains code to initialize the command queue, manage the
command queue descriptors and Rx/Tx protocol with the command processor
in the form of various commands/results and acknowledgements.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 15:31:55 +0000 (10:31 -0500)]
Merge branch 'dsa-MT7530-vlan'
Sean Wang says:
====================
add VLAN support to DSA MT7530
Changes sicne v2:
update to the latest code base from net-next and fix up all building
errors with -Werror.
Changes since v1:
- fix up the typo
- prefer ordering declarations longest to shortest
- update that vlan_prepare callback should not change any state
- use lower case letter for function naming
The patchset extends DSA MT7530 to VLAN support through filling required
callbacks in patch 1 and merging the special tag with VLAN tag in patch 2
for allowing that the hardware can handle these packets with VID from the
CPU port.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 15 Dec 2017 04:47:02 +0000 (12:47 +0800)]
net: dsa: mediatek: update MAINTAINERS entry with MediaTek switch driver
I work for MediaTek and maintain SoC targeting to home gateway and
also will keep extending and testing the function from MediaTek
switch.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 15 Dec 2017 04:47:01 +0000 (12:47 +0800)]
net: dsa: mediatek: combine MediaTek tag with VLAN tag
In order to let MT7530 switch can recognize well those egress packets
having both special tag and VLAN tag, the information about the special
tag should be carried on the existing VLAN tag. On the other hand, it's
unnecessary for extra handling for ingress packets when VLAN tag is
present since it is able to put the VLAN tag after the special tag and
then follow the existing way to parse.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 15 Dec 2017 04:47:00 +0000 (12:47 +0800)]
net: dsa: mediatek: add VLAN support for MT7530
MT7530 can treat each port as either VLAN-unaware port or VLAN-aware port
through the implementation of port matrix mode or port security mode on
the ingress port, respectively. On one hand, Each port has been acting as
the VLAN-unaware one whenever the device is created in the initial or
certain port joins or leaves into/from the bridge at the runtime. On the
other hand, the patch just filling the required callbacks for VLAN
operations is achieved via extending the port to be into port security
mode when the port is configured as VLAN-aware port. Which mode can make
the port be able to recognize VID from incoming packets and look up VLAN
table to validate and judge which port it should be going to. And the
range for VID from 1 to 4094 is valid for the hardware.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Egil Hjelmeland [Wed, 13 Dec 2017 14:42:50 +0000 (15:42 +0100)]
net: dsa: lan9303: Introduce lan9303_read_wait
Simplify lan9303_indirect_phy_wait_for_completion()
and lan9303_switch_wait_for_completion() by using a new function
lan9303_read_wait()
Changes v1 -> v2:
- param 'mask' type u32
- removed param 'value' (will probably never be used)
- add newline before return
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Dec 2017 20:57:39 +0000 (15:57 -0500)]
Merge branch 'hv_netvsc-minor-changes'
Stephen Hemminger says:
====================
hv_netvsc: minor changes
This includes minor cleanup of code in send and receive path and
also a new statistic to check for allocation failures. This also
eliminates some of the extra RCU when not needed.
There is a theoritical bug where buffered data could be blocked
for longer than necessary if the ring buffer got full. This
has not been seen in the wild, found by inspection.
The reference count between net device and internal RNDIS
is not needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Wed, 13 Dec 2017 00:48:40 +0000 (16:48 -0800)]
hv_netvsc: empty current transmit aggregation if flow blocked
If the transmit queue is known full, then don't keep aggregating
data. And the cp_partial flag which indicates that the current
aggregation buffer is full can be folded in to avoid more
conditionals.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Wed, 13 Dec 2017 00:48:39 +0000 (16:48 -0800)]
hv_netvsc: remove open_cnt reference count
There is only ever a single instance of network device object
referencing the internal rndis object. Therefore the open_cnt atomic
is not necessary.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Wed, 13 Dec 2017 00:48:38 +0000 (16:48 -0800)]
hv_netvsc: pass netvsc_device to receive callback
The netvsc_receive_callback function was using RCU to find the
appropriate underlying netvsc_device. Since calling function already
had that pointer, this was unnecessary.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Wed, 13 Dec 2017 00:48:37 +0000 (16:48 -0800)]
hv_netvsc: simplify function args in receive status path
The caller (netvsc_receive) already has the net device pointer,
and should just pass that to functions rather than the hyperv device.
This eliminates several impossible error paths in the process.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Wed, 13 Dec 2017 00:48:36 +0000 (16:48 -0800)]
hv_netvsc: track memory allocation failures in ethtool stats
When skb can not be allocated, update ethtool statisitics
rather than rx_dropped which is intended for netif_receive.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Wed, 13 Dec 2017 00:48:35 +0000 (16:48 -0800)]
hv_netvsc: copy_to_send buf can be void
Since only caller does not care about return value.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Dec 2017 20:55:02 +0000 (15:55 -0500)]
Merge branch 'phylink-dsa-prep'
Florian Fainelli says:
====================
PHYLINK preparatory patches for DSA
In preparation for having DSA migrate to PHYLINK, I had to come up with a
number of preparatory patches:
- we need to be able to pass phy_flags from an external component calling
phylink_of_phy_connect()
- DSA tries to connect through OF first, then fallsback using its own internal
MDIO bus, in that case we would both show an error, but also not know what
the correct phy_interface_t would be, instead use the PHY device/driver provided
one
- Finally bcm_sf2 makes use of all possible PHYs out there: internal, external,
fixed, and MoCA, the latter requires a bit of help to signal link notifications
through a MMIO interrupt, as well a report a correct PORT type
Changes in v2:
- rebased against latest net-next/master
- added kernel doc documentation
- dropped error message in phylink_of_phy_connect() as suggested by Russell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 13 Dec 2017 00:00:29 +0000 (16:00 -0800)]
net: phy: phylink: Report MoCA as PORT_BNC
Similarly to what PHYLIB already does, make sure that
PHY_INTERFACE_MODE_MOCA is reported as PORT_BNC.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 13 Dec 2017 00:00:28 +0000 (16:00 -0800)]
net: phy: phylink: Allow setting a custom link state callback
phylink_get_fixed_state() currently consults an optional "link_gpio"
GPIO descriptor, expand this mechanism to allow specifying a custom
callback. This is necessary to support out of band link notifcation
(e.g: from an interrupt within a MMIO register).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 13 Dec 2017 00:00:27 +0000 (16:00 -0800)]
net: phy: phylink: Remove error message
Some subsystems like DSA may be trying to connect to a PHY through OF first,
and then attempt a connect using a local MDIO bus, remove the error message:
"unable to find PHY node" so we can let MAC drivers whether to print it or not.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 13 Dec 2017 00:00:26 +0000 (16:00 -0800)]
net: phy: phylink: Use PHY device interface if N/A
We may not always be able to resolve a correct phy_interface_t value before
actually connecting to the PHY device, when that happens, just have
phylink_connect_phy() utilize what the PHY device/driver provided.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 13 Dec 2017 00:00:25 +0000 (16:00 -0800)]
net: phy: phylink: Allow specifying PHY device flags
In order to let subsystems like DSA fully utilize PHYLINK, we need to be able
to communicate phy_device::flags from of_phy_{connect,attach} even when using
PHYLINK APIs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Tue, 12 Dec 2017 21:10:40 +0000 (13:10 -0800)]
tcp: pause Fast Open globally after third consecutive timeout
Prior to this patch, active Fast Open is paused on a specific
destination IP address if the previous connections to the
IP address have experienced recurring timeouts . But recent
experiments by Microsoft (https://goo.gl/cykmn7) and Mozilla
browsers indicate the isssue is often caused by broken middle-boxes
sitting close to the client. Therefore it is much better user
experience if Fast Open is disabled out-right globally to avoid
experiencing further timeouts on connections toward other
destinations.
This patch changes the destination-IP disablement to global
disablement if a connection experiencing recurring timeouts
or aborts due to timeout. Repeated incidents would still
exponentially increase the pause time, starting from an hour.
This is extremely conservative but an unfortunate compromise to
minimize bad experience due to broken middle-boxes.
Reported-by: Dragana Damjanovic <ddamjanovic@mozilla.com>
Reported-by: Patrick McManus <mcmanus@ducksong.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 12 Dec 2017 21:06:35 +0000 (23:06 +0200)]
net: ethernet: ti: cpdma: correct error handling for chan create
It's not correct to return NULL when that is actually an error and
function returns errors in any other wrong case. In the same time,
the cpsw driver and davinci emac doesn't check error case while
creating channel and it can miss actual error. Also remove WARNs
replacing them on dev_err msgs.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Tue, 12 Dec 2017 19:34:05 +0000 (01:04 +0530)]
cxgb4: Add support for ethtool i2c dump
Adds support for ethtool get_module_info() and get_module_eeprom()
callbacks that will dump necessary information for a SFP.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Tue, 12 Dec 2017 16:39:04 +0000 (11:39 -0500)]
net: avoid skb_warn_bad_offload on IS_ERR
skb_warn_bad_offload warns when packets enter the GSO stack that
require skb_checksum_help or vice versa. Do not warn on arbitrary
bad packets. Packet sockets can craft many. Syzkaller was able to
demonstrate another one with eth_type games.
In particular, suppress the warning when segmentation returns an
error, which is for reasons other than checksum offload.
See also commit
36c92474498a ("net: WARN if skb_checksum_help() is
called on skb requiring segmentation") for context on this warning.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 12 Dec 2017 14:34:19 +0000 (06:34 -0800)]
net: sk_pacing_shift_update() helper
In commit
3a9b76fd0db9 ("tcp: allow drivers to tweak TSQ logic")
I gave a code sample to set sk->sk_pacing_shift that was not complete.
Better add a helper that can be used by drivers without worries,
and maybe amended in the future.
A wifi driver might use it from its ndo_start_xmit()
Following call would setup TCP to allow up to ~8ms of queued data per
flow.
sk_pacing_shift_update(skb->sk, 7);
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 12 Dec 2017 14:02:50 +0000 (16:02 +0200)]
net: bridge: use rhashtable for fdbs
Before this patch the bridge used a fixed 256 element hash table which
was fine for small use cases (in my tests it starts to degrade
above 1000 entries), but it wasn't enough for medium or large
scale deployments. Modern setups have thousands of participants in a
single bridge, even only enabling vlans and adding a few thousand vlan
entries will cause a few thousand fdbs to be automatically inserted per
participating port. So we need to scale the fdb table considerably to
cope with modern workloads, and this patch converts it to use a
rhashtable for its operations thus improving the bridge scalability.
Tests show the following results (10 runs each), at up to 1000 entries
rhashtable is ~3% slower, at 2000 rhashtable is 30% faster, at 3000 it
is 2 times faster and at 30000 it is 50 times faster.
Obviously this happens because of the properties of the two constructs
and is expected, rhashtable keeps pretty much a constant time even with
10000000 entries (tested), while the fixed hash table struggles
considerably even above 10000.
As a side effect this also reduces the net_bridge struct size from 3248
bytes to 1344 bytes. Also note that the key struct is 8 bytes.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 12 Dec 2017 12:53:18 +0000 (12:53 +0000)]
net: phy: marvell10g: remove XGMII as an option for 88x3310
Remove XGMII as an option for the 88x3310 PHY driver, as the PHY doesn't
support XGMII's 32-bit data lanes. It supports USXGMII, which is not
XGMII, but a single-lane serdes interface - see
https://developer.cisco.com/site/usgmii-usxgmii/
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Dec 2017 19:51:51 +0000 (14:51 -0500)]
Merge branch 'r8169-device-managed'
Heiner Kallweit says:
====================
r8169: extend PCI core and switch to device-managed functions in probe
Probe error path and remove callback can be significantly simplified
by using device-managed functions. To be able to do this in the r8169
driver we need a device-managed version of pci_set_mwi first.
v2:
Change patch 1 based on Björn's review comments and add his Acked-by.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 12 Dec 2017 06:41:06 +0000 (07:41 +0100)]
r8169: remove netif_napi_del in probe error path
netif_napi_del is called implicitely by free_netdev, therefore we
don't have to do it explicitely.
When the probe error path is reached, the net_device isn't
registered yet. Therefore reordering the call to netif_napi_del
shouldn't cause any issues.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 12 Dec 2017 06:41:02 +0000 (07:41 +0100)]
r8169: switch to device-managed functions in probe
Simplify probe error path and remove callback by using device-managed
functions.
rtl_disable_msi isn't needed any longer because the release callback
of pcim_enable_device does this implicitely.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 12 Dec 2017 06:40:56 +0000 (07:40 +0100)]
PCI: Add pcim_set_mwi(), a device-managed pci_set_mwi()
Add pcim_set_mwi(), a device-managed version of pci_set_mwi().
First user is the Realtek r8169 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 12 Dec 2017 05:25:12 +0000 (21:25 -0800)]
tcp/dccp: avoid one atomic operation for timewait hashdance
First, rename __inet_twsk_hashdance() to inet_twsk_hashdance()
Then, remove one inet_twsk_put() by setting tw_refcnt to 3 instead
of 4, but adding a fat warning that we do not have the right to access
tw anymore after inet_twsk_hashdance()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Dec 2017 19:01:09 +0000 (14:01 -0500)]
Merge branch 'rmnet-Configuration-options'
Subash Abhinov Kasiviswanathan says:
====================
net: qualcomm: rmnet: Configuration options
This series adds support for configuring features on rmnet devices.
The rmnet specific features to be configured here are aggregation and
control commands.
Patch 1 is a cleanup of return codes in the transmit path.
Patch 2 removes some redundant ingress and egress macros.
Patch 3 restricts the creation of rmnet dev to one dev per mux id for a
given real dev.
Patch 4 adds ethernet data path support.
Patches 5-6 add support for configuring features on new and existing
rmnet devices.
v1->v2:
The memory leak fixed as part of patch 1 is merged seperately as
a896d94abd2c ("net: qualcomm: rmnet: Fix leak on transmit failure").
Fix a use after free in patch 4 if a packet with headroom lesser than ethernet
header length is received.
v2->v3:
Fix formatting problem in patch 5 in the return statement.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 12 Dec 2017 00:30:15 +0000 (17:30 -0700)]
net: qualcomm: rmnet: Allow to configure flags for existing devices
Add an option to configure the mux id, aggregation and commad feature
for existing rmnet devices. Implement the changelink netlink
operation for this.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 12 Dec 2017 00:30:14 +0000 (17:30 -0700)]
net: qualcomm: rmnet: Allow to configure flags for new devices
Add an option to configure the rmnet aggregation and command features
on device creation. This is achieved by using the vlan flags option.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 12 Dec 2017 00:30:13 +0000 (17:30 -0700)]
net: qualcomm: rmnet: Process packets over ethernet
Add support to send and receive packets over ethernet.
An example of usage is testing the data path on UML. This can be
achieved by setting up two UML instances in multicast mode and
associating rmnet over the UML ethernet device.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 12 Dec 2017 00:30:12 +0000 (17:30 -0700)]
net: qualcomm: rmnet: Allow only one rmnet dev per muxid per real dev
Upon de-multiplexing data from one real dev, the packets can be sent
to an unique rmnet device for a given mux id.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 12 Dec 2017 00:30:11 +0000 (17:30 -0700)]
net: qualcomm: rmnet: Remove the some redundant macros
Multiplexing is always enabled when transmiting from a rmnet device,
so remove the redundant egress macros. De-multiplexing is always
enabled when receiving packets from a rmnet device, so remove those
ingress macros.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subash Abhinov Kasiviswanathan [Tue, 12 Dec 2017 00:30:10 +0000 (17:30 -0700)]
net: qualcomm: rmnet: Remove the rmnet_map_results enum
Only the success and consumed entries were actually in use.
Use standard error codes instead.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Mon, 11 Dec 2017 23:42:53 +0000 (15:42 -0800)]
tcp: allow TLP in ECN CWR
This patch enables tail loss probe in cwnd reduction (CWR) state
to detect potential losses. Prior to this patch, since the sender
uses PRR to determine the cwnd in CWR state, the combination of
CWR+PRR plus tcp_tso_should_defer() could cause unnecessary stalls
upon losses: PRR makes cwnd so gentle that tcp_tso_should_defer()
defers sending wait for more ACKs. The ACKs may not come due to
packet losses.
Disallowing TLP when there is unused cwnd had the primary effect
of disallowing TLP when there is TSO deferral, Nagle deferral,
or we hit the rwin limit. Because basically every application
write() or incoming ACK will cause us to run tcp_write_xmit()
to see if we can send more, and then if we sent something we call
tcp_schedule_loss_probe() to see if we should schedule a TLP. At
that point, there are a few common reasons why some cwnd budget
could still be unused:
(a) rwin limit
(b) nagle check
(c) TSO deferral
(d) TSQ
For (d), after the next packet tx completion the TSQ mechanism
will allow us to send more packets, so we don't really need a
TLP (in practice it shouldn't matter whether we schedule one
or not). But for (a), (b), (c) the sender won't send any more
packets until it gets another ACK. But if the whole flight was
lost, or all the ACKs were lost, then we won't get any more ACKs,
and ideally we should schedule and send a TLP to get more feedback.
In particular for a long time we have wanted some kind of timer for
TSO deferral, and at least this would give us some kind of timer
Reported-by: Steve Ibanez <sibanez@stanford.edu>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Nandita Dukkipati <nanditad@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Mon, 11 Dec 2017 23:35:03 +0000 (15:35 -0800)]
net_sched: switch to exit_batch for action pernet ops
Since we now hold RTNL lock in tc_action_net_exit(), it is good to
batch them to speedup tc action dismantle.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Dec 2017 18:25:05 +0000 (13:25 -0500)]
Merge branch 'hv_netvsc-Fix-default-and-limit-of-recv-buffer'
Stephen Hemminger says:
====================
hv_netvsc: Fix default and limit of recv buffer
The default for receive buffer descriptors is not correct, it should
match the default receive buffer size and the upper limit of receive
buffer size is too low. Also, for older versions of Window servers
hosts, different lower limit check is necessary, otherwise the buffer
request will be rejected by the host, resulting vNIC not come up.
This patch set corrects these problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Mon, 11 Dec 2017 16:56:58 +0000 (08:56 -0800)]
hv_netvsc: Fix the TX/RX buffer default sizes
The values were not computed correctly. There are no significant
visible impact, though.
The intended size of RX buffer is 16 MB, and the default slot size is 1728.
So, NETVSC_DEFAULT_RX should be 16*1024*1024 / 1728 = 9709.
The intended size of TX buffer is 1 MB, and the slot size is 6144.
So, NETVSC_DEFAULT_TX should be 1024*1024 / 6144 = 170.
The patch puts the formula directly into the macro, and moves them to
hyperv_net.h, together with related macros.
Fixes:
5023a6db73196 ("netvsc: increase default receive buffer size")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Mon, 11 Dec 2017 16:56:57 +0000 (08:56 -0800)]
hv_netvsc: Fix the receive buffer size limit
The max should be 31 MB on host with NVSP version > 2.
On legacy hosts (NVSP version <=2) only 15 MB receive buffer is allowed,
otherwise the buffer request will be rejected by the host, resulting
vNIC not coming up.
The NVSP version is only available after negotiation. So, we add the
limit checking for legacy hosts in netvsc_init_buf().
Fixes:
5023a6db73196 ("netvsc: increase default receive buffer size")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Dec 2017 16:22:54 +0000 (11:22 -0500)]
Merge branch 'fec-fix-refclk-enable-for-SMSC-LAN8710-20'
Richard Leitner says:
====================
net: fec: fix refclk enable for SMSC LAN8710/20
This patch series fixes the use of the SMSC LAN8710/20 with a Freescale ETH
when the refclk is generated by the FSL.
This patchset depends on the "phylib: Add device reset GPIO support" patch
submitted by Geert Uytterhoeven/Sergei Shtylyov, which was merged to
net-next as commit
bafbdd527d56 ("phylib: Add device reset GPIO support").
Changes v5:
- fix reset delay calculation (max_t instead of min_t)
Changes v4:
- simplify dts parsing
- simplify reset delay evaluation and execution
- fec: ensure to only reset once during fec_enet_open()
- remove dependency notes from commit message
- add reviews and acks
Changes v3:
- use phylib to hard-reset the PHY
- implement reset delays in phylib
- add new phylib API & flag (PHY_RST_AFTER_CLK_EN) to determine if
a PHY is affected
Changes v2:
- simplify and fix fec_reset_phy function to support multiple calls
- include: linux: phy: harmonize phy_id{,_mask} type
- reset the phy instead of not turning the clock on and off
(which would have caused a power consumption regression)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Leitner [Mon, 11 Dec 2017 12:17:00 +0000 (13:17 +0100)]
net: fec: add phy_reset_after_clk_enable() support
Some PHYs (for example the SMSC LAN8710/LAN8720) doesn't allow turning
the refclk on and off again during operation (according to their
datasheet). Nonetheless exactly this behaviour was introduced for power
saving reasons by commit
e8fcfcd5684a ("net: fec: optimize the clock management to save power").
Therefore add support for the phy_reset_after_clk_enable function from
phylib to mitigate this issue.
Generally speaking this issue is only relevant if the ref clk for the
PHY is generated by the SoC and therefore the PHY is configured to
"REF_CLK In Mode". In our specific case (PCB) this problem does occur at
about every 10th to 50th POR of an LAN8710 connected to an i.MX6SOLO
SoC. The typical symptom of this problem is a "swinging" ethernet link.
Similar issues were reported by users of the NXP forum:
https://community.nxp.com/thread/389902
https://community.nxp.com/message/309354
With this patch applied the issue didn't occur for at least a few
hundret PORs of our board.
Fixes:
e8fcfcd5684a ("net: fec: optimize the clock management to save power")
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Leitner [Mon, 11 Dec 2017 12:16:59 +0000 (13:16 +0100)]
net: phy: smsc: LAN8710/20: add PHY_RST_AFTER_CLK_EN flag
The Microchip/SMSC LAN8710/LAN8720 PHYs need (according to their
datasheet [1]) a continuous REF_CLK when configured to "REF_CLK In Mode".
Therefore set the PHY_RST_AFTER_CLK_EN flag for those PHYs to let the
ETH driver reset them after the REF_CLK is enabled.
[1] http://ww1.microchip.com/downloads/en/DeviceDoc/
00002165B.pdf
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Leitner [Mon, 11 Dec 2017 12:16:58 +0000 (13:16 +0100)]
phylib: add reset after clk enable support
Some PHYs need the refclk to be a continuous clock. Therefore they don't
allow turning it off and on again during operation. Nonetheless such a
clock switching is performed by some ETH drivers (namely FEC [1]) for
power saving reasons. An example for an affected PHY is the
SMSC/Microchip LAN8720 in "REF_CLK In Mode".
In order to provide a uniform method to overcome this problem this patch
adds a new phy_driver flag (PHY_RST_AFTER_CLK_EN) and corresponding
function phy_reset_after_clk_enable() to the phylib. These should be
used to trigger reset of the PHY after the refclk is switched on again.
[1] commit
e8fcfcd5684a ("net: fec: optimize the clock management to save power")
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Leitner [Mon, 11 Dec 2017 12:16:57 +0000 (13:16 +0100)]
phylib: Add device reset delay support
Some PHYs need a minimum time after the reset gpio was asserted and/or
deasserted. To ensure we meet these timing requirements add two new
optional devicetree parameters for the phy: reset-delay-us and
reset-post-delay-us.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Dec 2017 16:16:51 +0000 (11:16 -0500)]
Merge branch 'mvpp2-various-improvements'
Antoine Tenart says:
====================
net: mvpp2: various improvements
These patches are sent as a series to avoid any possible conflict, even
though there're not entirely related. I can send them separately if
needed. The series applies on today's net-next tree.
Since v1:
- Removed the patch disabling TSO on allocation errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 11 Dec 2017 08:13:29 +0000 (09:13 +0100)]
net: mvpp2: adjust the coalescing parameters
This patch adjust the coalescing parameters to the vendor
recommendations for the PPv2 network controller.
Suggested-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 11 Dec 2017 08:13:28 +0000 (09:13 +0100)]
net: mvpp2: report the tx-usec coalescing information to ethtool
This patch adds the tx-usec value to the informations reported to
ethtool by the get_coalesce function.
Suggested-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 11 Dec 2017 08:13:27 +0000 (09:13 +0100)]
net: mvpp2: align values in ethtool get_coalesce
Cosmetic patch aligning values in the ethtool get_coalesce function.
This patch do not modify in anyway the driver's behaviour.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yan Markman [Mon, 11 Dec 2017 08:13:26 +0000 (09:13 +0100)]
net: mvpp2: split the max ring size from the default one
The Rx/Tx ring sizes can be adjusted thanks to ethtool given specific
network needs. This commit splits the default ring size from its max
value to allow ethtool to vary the parameters in both ways.
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 11 Dec 2017 08:13:25 +0000 (09:13 +0100)]
net: mvpp2: only free the TSO header buffers when it was allocated
This patch adds a check to only free the TSO header buffer when its
allocation previously succeeded.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 12 Dec 2017 15:53:04 +0000 (10:53 -0500)]
Merge branch 'tcp-better-receiver-autotuning'
Eric Dumazet says:
====================
tcp: better receiver autotuning
Now TCP senders no longer backoff when a drop is detected,
it appears we are very often receive window limited.
This series makes tcp_rcv_space_adjust() slightly more robust
and responsive.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 11 Dec 2017 01:55:04 +0000 (17:55 -0800)]
tcp: smoother receiver autotuning
Back in linux-3.13 (commit
b0983d3c9b13 ("tcp: fix dynamic right sizing"))
I addressed the pressing issues we had with receiver autotuning.
But DRS suffers from extra latencies caused by rcv_rtt_est.rtt_us
drifts. One common problem happens during slow start, since the
apparent RTT measured by the receiver can be inflated by ~50%,
at the end of one packet train.
Also, a single drop can delay read() calls by one RTT, meaning
tcp_rcv_space_adjust() can be called one RTT too late.
By replacing the tri-modal heuristic with a continuous function,
we can offset the effects of not growing 'at the optimal time'.
The curve of the function matches prior behavior if the space
increased by 25% and 50% exactly.
Cost of added multiply/divide is small, considering a TCP flow
typically would run this part of the code few times in its life.
I tested this patch with 100 ms RTT / 1% loss link, 100 runs
of (netperf -l 5), and got an average throughput of 4600 Mbit
instead of 1700 Mbit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 11 Dec 2017 01:55:03 +0000 (17:55 -0800)]
tcp: avoid integer overflows in tcp_rcv_space_adjust()
When using large tcp_rmem[2] values (I did tests with 500 MB),
I noticed overflows while computing rcvwin.
Lets fix this before the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 11 Dec 2017 01:55:02 +0000 (17:55 -0800)]
tcp: do not overshoot window_clamp in tcp_rcv_space_adjust()
While rcvbuf is properly clamped by tcp_rmem[2], rcvwin
is left to a potentially too big value.
It has no serious effect, since :
1) tcp_grow_window() has very strict checks.
2) window_clamp can be mangled by user space to any value anyway.
tcp_init_buffer_space() and companions use tcp_full_space(),
we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Sun, 10 Dec 2017 03:07:26 +0000 (22:07 -0500)]
forcedeth: remove unnecessary structure member
Since both tx_ring and first_tx are the head of tx ring, it not
necessary to use two structure members to statically indicate
the head of tx ring. So first_tx is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 11 Dec 2017 17:08:23 +0000 (12:08 -0500)]
Merge branch 'nfp-dead-code-clean-ups-and-slight-improvements'
Jakub Kicinski says:
====================
nfp: dead code, clean ups and slight improvements
This series contains small clean ups from John and Carl, and brings
no functional changes.
John's improvements target the flower code. First he makes sure we don't
allocate space in FW request messages for MAC matches if the TC rule does
not contain any. The remaining two patches remove some dead code and
unused defines.
Carl follows up with a slight optimization to his recent ethtool FW state
dumps, byte swapping input parameters once instead of the data for every
dumped item.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Carl Heymann [Sat, 9 Dec 2017 03:37:04 +0000 (19:37 -0800)]
nfp: debug dump - decrease endian conversions
Convert the requested dump level parameter to big-endian at the start of
nfp_net_dump_calculate_size() and nfp_net_dump_populate_buffer(), then
compare and assign it directly where needed in the traversal and prolog
code. This decreases the total number of conversions used.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Sat, 9 Dec 2017 03:37:03 +0000 (19:37 -0800)]
nfp: flower: remove unused defines
Delete match field defines that are not supported at this time.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Sat, 9 Dec 2017 03:37:02 +0000 (19:37 -0800)]
nfp: flower: remove dead code paths
Port matching is selected by default on every rule so remove check for it
and delete 'else' side of the statement. Remove nfp_flower_meta_one as now
it will not feature in the code. Rename nfp_flower_meta_two given that one
has been removed.
'Additional metadata' if statement can never be true so remove it as well.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Sat, 9 Dec 2017 03:37:01 +0000 (19:37 -0800)]
nfp: flower: do not assume mac/mpls matches
Remove the matching of mac/mpls as a default selection. These are not
necessarily set by a TC rule (unlike the port). Previously a mac/mpls
field would exist in every match and be masked out if not used. This patch
has no impact on functionality but removes unnessary memory assignment in
the match cmsg.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Estevam [Fri, 8 Dec 2017 14:11:33 +0000 (12:11 -0200)]
dt-bindings: fec: Make the phy-reset-gpio polarity explicit
The GPIO polarity passed to phy-reset-gpio is ignored by the FEC
driver and it is assumed to be active low.
It can be active high only when the 'phy-reset-active-high' property
is present.
The current examples pass active high polarity and work fine, but
in order to improve the documentation make it explicit what the real
polarity is.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 11 Dec 2017 16:23:06 +0000 (11:23 -0500)]
Merge branch 'sctp-stream-interleave-part-1'
Xin Long says:
====================
sctp: Implement Stream Interleave: The I-DATA Chunk Supporting User Message Interleaving
Stream Interleave would be Implemented in two Parts:
1. The I-DATA Chunk Supporting User Message Interleaving
2. Interaction with Other SCTP Extensions
Overview in section 1.1 of RFC8260 for Part 1:
This document describes a new chunk carrying payload data called
I-DATA. This chunk incorporates the properties of the current SCTP
DATA chunk, all the flags and fields except the Stream Sequence
Number (SSN), and also adds two new fields in its chunk header -- the
Fragment Sequence Number (FSN) and the Message Identifier (MID). The
FSN is only used for reassembling all fragments that have the same
MID and the same ordering property. The TSN is only used for the
reliable transfer in combination with Selective Acknowledgment (SACK)
chunks.
In addition, the MID is also used for ensuring ordered delivery
instead of using the stream sequence number (the I-DATA chunk omits
an SSN).
As the 1st part of Stream Interleave Implementation, this patchset adds
an ops framework named sctp_stream_interleave with a bunch of stuff that
does lots of things needed somewhere.
Then it defines sctp_stream_interleave_0 to work for normal DATA chunks
and sctp_stream_interleave_1 for I-DATA chunks.
With these functions, hundreds of if-else checks for the different process
on I-DATA chunks would be avoided. Besides, very few codes could be shared
in these two function sets.
In this patchset, it adds some basic variables, structures and socket
options firstly, then implement these functions one by one to add the
procedures for ordered idata gradually, at last adjusts some codes to
make them work for unordered idata.
To make it safe to be implemented and also not break the normal data
chunk process, this feature can't be enabled to use until all stream
interleave codes are completely accomplished.
v1 -> v2:
- fixed a checkpatch warning that a blank line was missed.
- avoided a kbuild warning reported from gcc-4.9.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 8 Dec 2017 13:04:09 +0000 (21:04 +0800)]
sctp: add support for the process of unordered idata
Unordered idata process is more complicated than unordered data:
- It has to add mid into sctp_stream_out to save the next mid value,
which is separated from ordered idata's.
- To support pd for unordered idata, another mid and pd_mode need to
be added to save the message id and pd state in sctp_stream_in.
- To make unordered idata reasm easier, it adds a new event queue
to save frags for idata.
The patch mostly adds the samilar reasm functions for unordered idata
as ordered idata's, and also adjusts some other codes on assign_mid,
abort_pd and ulpevent_data for idata.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 8 Dec 2017 13:04:08 +0000 (21:04 +0800)]
sctp: implement abort_pd for sctp_stream_interleave
abort_pd is added as a member of sctp_stream_interleave, used to abort
partial delivery for data or idata, called in sctp_cmd_assoc_failed.
Since stream interleave allows to do partial delivery for each stream
at the same time, sctp_intl_abort_pd for idata would be very different
from the old function sctp_ulpq_abort_pd for data.
Note that sctp_ulpevent_make_pdapi will support per stream in this
patch by adding pdapi_stream and pdapi_seq in sctp_pdapi_event, as
described in section 6.1.7 of RFC6458.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>