2009-10-15  Jim Blandy  <jimb@red-bean.com>

* libgnuintl.h (_INTL_MAY_RETURN_STRING_ARG, gettext, dgettext)
(dcgettext, ngettext, dngettext, dcngettext): Backport changes
from current gettext to provide GCC format_arg attributes.

*** empty log message ***

2009-10-14  Cary Coutant  <ccoutant@google.com>

* dwarf2read.c (read_import_statement): Call follow_die_ref_or_sig.

daily update

* dwarf2read.c (dwarf2_const_value): Fix order of arguments to
store_unsigned_integer.

Remove spurious gdb/ ...

gdb/
* configure.ac (build_warnings): Add -Wunused-value.
* configure: Regenerate.

2009-10-14  Tristan Gingold  <gingold@adacore.com>

* solib-darwin.c: Remove trailing whitespaces.
(darwin_dyld_version_ok): Fix typo.

PR 969
* m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.

2009-10-14  Andrew Stubbs  <ams@codesourcery.com>

* sh-tdep.c (sh_gdbarch_init): Add show_regs settings for
bfd_mach_sh3_nommu, bfd_mach_sh2a_nofpu_or_sh3_nommu,
bfd_mach_sh2a_or_sh3e, bfd_mach_sh2a_or_sh4, bfd_mach_sh4_nommu_nofpu,
and bfd_mach_sh2a_nofpu_or_sh4_nommu_nofpu.
Move bfd_mach_sh2a_or_sh4 to use the same configuration as
bfd_mach_sh4.

include/
* bfdlink.h (enum bfd_link_common_skip_ar_symbols): Rename from
bfd_link_common_skip_ar_aymbols.
(struct bfd_link_info): Here too.
bfd/
* aoutx.h (aout_link_check_ar_symbols): Typo fix.
ld/
* emultempl/netbsd.em (gldnetbsd_before_parse): Typo fix.

*** empty log message ***

* MAINTAINERS (common): Move myself to "past maintainers" section.

daily update

* arm-tdep.c (arm_push_dummy_call): Set the low bit of LR for
a Thumb entry point.
(thumb_get_next_pc): Handle Thumb-2 and ARM v6 instructions.  Refuse
to single step into IT blocks.

2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
and vex_w_done.

2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/10763
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Declare plt
earlier.

2009-10-13  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infcall.c (call_function_by_hand): Formatting.

2009-10-13  Pedro Alves  <pedro@codesourcery.com>

gdb/gdbserver/
* proc-service.c (ps_lgetregs): Formatting.

2009-10-13  Tristan Gingold  <gingold@adacore.com>

* solib-darwin.c: Add an empty line after comment for functions.
(struct gdb_dyld_all_image_infos): Improve comment.
(DYLD_VERSION): Removed and replaced by ...
(DYLD_VERSION_MAX, DYLD_VERSION_MIN): ... New macros.
(darwin_dyld_version_ok): New function.
(darwin_load_image_infos): Call darwin_dyld_version_ok.
(darwin_current_sos): Ditto.
(darwin_solib_create_inferior_hook): Ditto.

2009-10-13  Tristan Gingold  <gingold@adacore.com>

* machoread.c: Add an empty line after comment for functions.
(oso_el_compare_name): New function.
(macho_add_oso_symfile): New function.
(macho_oso_symfile): Use macho_add_oso_symfile.  Sort the oso
and optimize accesses to libraries.

2009-10-12  Tristan Gingold  <gingold@adacore.com>

* gdb.base/sepdebug.exp: Check debug info are found.

2009-10-12  Tristan Gingold  <gingold@adacore.com>

* objfiles.c (objfile_has_symbols): New function.
* objfiles.h (objfile_has_symbols): Add prototype.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Call
objfile_has_symbols.
(reread_symbols): Ditto.

* elflink.c (_bfd_elf_merge_symbol): Revert previous patch.

Fix toplevel 'config.status --recheck' for --enable-lto.

/:
* configure.ac: Add 'lto' to enable_languages, not
new_enable_languages, and only if not already present.
* configure: Regenerate.

Fix %s that should be %B in several message formats.

*** empty log message ***

daily update

doc/
2009-10-08  Paul Pluzhnikov  <ppluzhnikov@google.com>

* gdb.texinfo (Server): Document libthread-db-search-path.

gdbserver/
2009-10-08  Paul Pluzhnikov  <ppluzhnikov@google.com>

* acinclude.m4: (SRV_CHECK_THREAD_DB, SRV_CHECK_TLS_GET_ADDR): Remove.
* configure.ac: Adjust.
* linux-low.h (struct process_info_private): Move members to struct
thread_db.
(thread_db_free, thread_db_handle_monitor_command): New prototype.
* linux-low.c (linux_remove_process): Adjust.
(linux_wait_for_event_1, linux_look_up_symbols): Likewise.
* server.c (handle_query): Move code ...
(handle_monitor_command): ... here. New function.
* target.h (struct target_ops): New member.
* thread-db.c (struct thread_db): New.
(libthread_db_search_path): New variable.
(thread_db_create_event, thread_db_enable_reporting)
(find_one_thread, maybe_attach_thread, find_new_threads_callback)
(thread_db_find_new_threads, (thread_db_get_tls_address): Adjust.
(try_thread_db_load_1, dladdr_to_soname): New functions.
(try_thread_db_load, thread_db_load_search): New functions.
(thread_db_init): Search for libthread_db.
(thread_db_free): New function.
(thread_db_handle_monitor_command): Likewise.
* config.in: Regenerate.
* configure: Regenerate.

2009-10-12  Jiang Jilin  <freephp@gmail.com>

* i386-tdep.c (i386_process_record): Add xgetbv/xsetbv
instructions support.

2009-10-11  Michael Snyder  <msnyder@vmware.com>

* gdb.texinfo (ReverseStep): Show default as "unsupported".
(ReverseContinue): Ditto.

*** empty log message ***

daily update

* procfs.c (procfs_make_note_section): Go back to only outputing
an NT_PSTATUS note when UNIXWARE is defined.

* features/xinclude.dtd: Correct EMPTY typo.

2009-10-09  Michael Snyder  <msnyder@vmware.com>

* i386-tdep.c (i386_process_record): Or-equals, not not-equals.

*** empty log message ***

*** empty log message ***

daily update

* mi/mi-cmd-stack.c (list_args_or_locals): Use internal_error.
Put "break" statements on their own line.

* cofflink.c (_bfd_coff_link_input_bfd): Skip section symbols for
excluded output sections.

*** empty log message ***

daily update

merge from gcc

bfd/
2009-10-09  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_read_command): Handle BFD_MACH_O_LC_RPATH.
(bfd_mach_o_bfd_print_private_bfd_data): Ditto.

2009-10-09  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_scan_read_symtab_symbols): Rename to
bfd_mach_o_read_symtab_symbols.
(bfd_mach_o_scan_write_thread): Rename to bfd_mach_o_write_thread.
(bfd_mach_o_scan_write_relocs): Rename to bfd_mach_o_write_relocs.
(bfd_mach_o_scan_write_section_32): Rename to
bfd_mach_o_write_section_32.
(bfd_mach_o_scan_write_section_64): Rename to
bfd_mach_o_write_section_64.
(bfd_mach_o_scan_write_segment_32): Rename to
bfd_mach_o_write_segment_32.
(bfd_mach_o_scan_write_segment_64): Rename to
bfd_mach_o_write_segment_64.
(bfd_mach_o_scan_write_symtab): Rename to bfd_mach_o_write_symtab.
(bfd_mach_o_scan_read_section_32): Rename to
bfd_mach_o_read_section_32.
(bfd_mach_o_scan_read_section_64): Rename to
bfd_mach_o_read_section_64.
(bfd_mach_o_scan_read_section): Rename to bfd_mach_o_read_section.
(bfd_mach_o_scan_read_symtab_strtab): Rename to
bfd_mach_o_read_symtab_strtab.
(bfd_mach_o_scan_read_symtab_symbol): Rename to
bfd_mach_o_read_symtab_symbol.
(bfd_mach_o_scan_read_dysymtab_symbol): Rename to
bfd_mach_o_read_dysymtab_symbol.
(bfd_mach_o_scan_read_dylinker): Rename to bfd_mach_o_read_dylinker.
(bfd_mach_o_scan_read_dylib): Rename to bfd_mach_o_read_dylib.
(bfd_mach_o_scan_read_prebound_dylib): Rename to
bfd_mach_o_read_prebound_dylib.
(bfd_mach_o_scan_read_thread): Rename to bfd_mach_o_read_thread.
(bfd_mach_o_scan_read_dysymtab): Rename to bfd_mach_o_read_dysymtab.
(bfd_mach_o_scan_read_symtab): Rename to bfd_mach_o_read_symtab.
(bfd_mach_o_scan_read_uuid): Rename to bfd_mach_o_read_uuid.
(bfd_mach_o_scan_read_linkedit): Rename to bfd_mach_o_read_linkedit.
(bfd_mach_o_scan_read_str): Rename to bfd_mach_o_read_str.
(bfd_mach_o_scan_read_dyld_info): Rename to bfd_mach_o_read_dyld_info.
(bfd_mach_o_scan_read_segment): Rename to bfd_mach_o_read_segment.
(bfd_mach_o_scan_read_segment_32): Rename to
bfd_mach_o_read_segment_32.
(bfd_mach_o_scan_read_segment_64): Rename to
bfd_mach_o_read_segment_64.
(bfd_mach_o_scan_read_command): Rename to bfd_mach_o_read_command.
* mach-o.h (bfd_mach_o_scan_read_dysymtab_symbol): Rename to
bfd_mach_o_read_dysymtab_symbol.

2009-10-09  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_section_get_entry_size): Moved.
(bfd_mach_o_section_get_nbr_indirect): Ditto.
(bfd_mach_o_get_synthetic_symtab): New function.
(bfd_mach_o_print_private_header): Print the number of commands
in decimal.
* mach-o.h (bfd_mach_o_get_synthetic_symtab): Add prototype.
* mach-o-target.c: Do not defined bfd_mach_o_get_synthetic_symtab.

merge from gcc

* linux-nat.c (linux_nat_wait_1): Bail out, if TARGET_WNOHANG and
we found no event while waiting for a specific LWP.
* infrun.c (handle_inferior_event): Handle TARGET_WAITKIND_IGNORE
before anything else.

* procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
note when NEW_PROC_API is defined.

* corelow.c (add_to_thread_list): Fix typo.

* corelow.c (core_has_fake_pid): New.
(core_close): Clear it.
(add_to_thread_list): Fake a pid if one is not found on a Solaris
core.  Add the inferior here.  Always add the thread, don't use
thread_change_ptid.
(core_open): Don't add the main thread or the inferior here unless
we find that the core had no .reg/NN sections.
(get_core_register_section): Handle Solaris cores with fake pids.

doc/
2009-10-08  Paul Pluzhnikov  <ppluzhnikov@google.com>

* gdb.texinfo (Server): Document libthread-db-search-path.

gdbserver/
2009-10-08  Paul Pluzhnikov  <ppluzhnikov@google.com>

* acinclude.m4: (SRV_CHECK_THREAD_DB, SRV_CHECK_TLS_GET_ADDR): Remove.
* configure.ac: Adjust.
* linux-low.h (struct process_info_private): Move members to struct
thread_db.
(thread_db_free, thread_db_handle_monitor_command): New prototype.
* linux-low.c (linux_remove_process): Adjust.
(linux_wait_for_event_1, linux_look_up_symbols): Likewise.
* server.c (handle_query): Move code ...
(handle_monitor_command): ... here. New function.
* target.h (struct target_ops): New member.
* thread-db.c (struct thread_db): New.
(libthread_db_search_path): New variable.
(thread_db_create_event, thread_db_enable_reporting)
(find_one_thread, maybe_attach_thread, find_new_threads_callback)
(thread_db_find_new_threads, (thread_db_get_tls_address): Adjust.
(try_thread_db_load_1, dladdr_to_soname): New functions.
(try_thread_db_load, thread_db_load_search): New functions.
(thread_db_init): Search for libthread_db.
(thread_db_free): New function.
(thread_db_handle_monitor_command): Likewise.
* config.in: Regenerate.
* configure: Regenerate.

*** empty log message ***

daily update

gdb/testsuite/
* lib/gdb.exp (gdb_compile): Remove dead aix and irix related
bits.

2009-10-08  Paul Pluzhnikov  <ppluzhnikov@google.com>

PR gdb/10457
* elfread.c (elf_symtab_read): Don't use alloca in a loop.

gdb/doc/
* gdbint.texinfo (i386_stopped_by_hwbp): Remove.

2009-10-08  Tristan Gingold  <gingold@adacore.com>

* config.bfd: Add bfd_mach_o_i386_vec in x86_64-darwin targ_selvecs.

manually sync from the CVS repository

*** empty log message ***

daily update

gdb/testsuite/
* gdb.base/hbreak.exp, gdb.base/hbreak.c: New.

gdb/
* i386-nat.c (i386_stopped_by_hwbp): Remove.

    * NEWS: Update following the GDB 7.0 release.

    * gdb.base/watchpoints.c: Add copyright header.  Reformat one
        of the comments.

* opcodes/microblaze-dis.c: Add include for microblaze-dis.h,
eliminate local extern decls.
* opcodes/microblaze-dis.h: New.

Sync with gcc repository.

merge from gcc

*** empty log message ***

ARI fix: OP eol rule.
* doublest.c (floatformat_from_length): Avoid operator at end of line.
* dwarf2-frame.c (dwarf2_build_frame_info): Idem.
* dwarf2read.c (read_array_order, dwarf_decode_macros): Idem.
* eval.c (evaluate_subexp_standard): Idem.
* event-loop.c (create_timer, handle_timer_event): Idem.
* expprint.c (print_subexp_standard): Idem.
* f-exp.y (variable): Idem.
* f-typeprint.c (f_print_type): Idem.

ARI fix: OP eol rule.
* blockframe.c (find_pc_partial_function): Avoid operator at end of
line.
* buildsym.c (find_symbol_in_list): Idem.
(start_subfile, patch_subfile_names): Idem.
* c-exp.y (variable, yylex): Idem.
* c-typeprint.c (c_print_type, c_type_print_base): Idem.
* c-valprint.c (c_val_print): Idem.
* coffread.c (patch_opaque_types, process_coff_symbol): Idem.
* corelow.c (core_open): Idem.
* cris-tdep.c (move_reg_to_mem_movem_op): Idem.
* cli/cli-decode.c (help_cmd_list, find_command_name_length): Idem.

ARI fix: OP eol rule.
* ada-exp.y (block_lookup): Avoid operator at end of line.
* aix-thread.c (pd_enable): Idem.
* alpha-tdep.c (alpha_next_pc): Idem.
* arm-tdep.c (arm_skip_prologue, arm_scan_prologue): Idem.
(condition_true, coff_sym_is_thumb): Idem.

Merge from gcc repository.

2009-10-06  H.J. Lu  <hongjiu.lu@intel.com>

* bfd-in2.h: Regenerated.

* info (Contributors): Add self for Xilinx MicroBlaze.
(Embedded Processors): Add MicroBlaze.
(MicroBlaze): New.  Describe Xilinx MicroBlaze

GDB 7.0 released.

Minor reformatting of the last entry.

Updated Finnish translation

* ARI fix: "%p" rule.
target.c (debug_to_thread_architecture): Replace %p by %s using
host_address_to_string function.

* microblaze/interp.c: Add include microblaze-dis.h.

* gdb.base/annota1.exp: Remove obsolete match_max increase.
* gdb.base/annota3.exp: Idem.
* gdb.base/maint.exp: Idem.

2009-10-06  Tristan Gingold  <gingold@adacore.com>

* darwin-nat.c: Add __TEXT __info_plist content.
(darwin_attach_pid): Update error message.

    * MAINTAINERS: Add Tristan Gingold as Maintainer of the Darwin port.

    * MAINTAINERS: Add Jan Kratochvil as Maintainer of the ia64 target.

*** empty log message ***

daily update

Revert:
2009-10-04  Pedro Alves  <pedro@codesourcery.com>
* gdbinit.in: Set data-directory to @srcdir@.

    * opc2c.c: Include "libiberty.h" and <errno.h>.
        (orig_filename): Constify.
        (dump_lines): Fix line number directive.
        (main): Set orig_filename to basename of input file.  Use
        xstrerror.

        * Makefile.am (rx-dis.lo): Remove explicit dependencies.
        ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
        instead of $(EXEEXT).
        (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
        $(LINK_FOR_BUILD).  Link with libiberty.
        (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
        (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
        * Makefile.in: Regenerated.
        * rx-decode.c: Regenerated.

* lib/gdb.exp (default_gdb_init): Set current value of match_max
to default.

*** empty log message ***

daily update

* NEWS: Mention non-stop mode.

* gdb.texinfo (Remote Protocol): Don't mention vCont;T.

* gdbinit.in: Set data-directory to @srcdir@.

*** empty log message ***

daily update

Revert the last change.

2009-10-03  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am ($(srcdir)/rx-decode.c): Add @MAINT@.
(rx-dis.lo): Remove a space.
(pc2c$(EXEEXT)): Remove a space. Use $(LINK_FOR_BUILD) instead
of gcc.
(MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
* Makefile.in: Regenerated.

* arm-dis.c (print_insn): Check symtab_size not *symtab.

*** empty log message ***