OSDN Git Service
Alexander Shiyan [Wed, 1 Jun 2016 19:21:53 +0000 (22:21 +0300)]
pinctrl: imx: Do not treat a PIN without MUX register as an error
commit
ba562d5e54fd3136bfea0457add3675850247774 upstream.
Some PINs do not have a MUX register, it is not an error.
It is necessary to allow the continuation of the PINs configuration,
otherwise the whole PIN-group will be configured incorrectly.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Tue, 31 May 2016 21:17:06 +0000 (14:17 -0700)]
pinctrl: single: Fix missing flush of posted write for a wakeirq
commit
0ac3c0a4025f41748a083bdd4970cb3ede802b15 upstream.
With many repeated suspend resume cycles, the pin specific wakeirq
may not always work on omaps. This is because the write to enable the
pin interrupt may not have reached the device over the interconnect
before suspend happens.
Let's fix the issue with a flush of posted write with a readback.
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minfei Huang [Fri, 27 May 2016 06:17:10 +0000 (14:17 +0800)]
pvclock: Add CPU barriers to get correct version value
commit
749d088b8e7f4b9826ede02b9a043e417fa84aa1 upstream.
Protocol for the "version" fields is: hypervisor raises it (making it
uneven) before it starts updating the fields and raises it again (making
it even) when it is done. Thus the guest can make sure the time values
it got are consistent by checking the version before and after reading
them.
Add CPU barries after getting version value just like what function
vread_pvclock does, because all of callees in this function is inline.
Fixes:
502dfeff239e8313bfbe906ca0a1a6827ac8481b
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Welling [Wed, 20 Jul 2016 17:02:07 +0000 (10:02 -0700)]
Input: tsc200x - report proper input_dev name
commit
e9003c9cfaa17d26991688268b04244adb67ee2b upstream.
Passes input_id struct to the common probe function for the tsc200x drivers
instead of just the bustype.
This allows for the use of the product variable to set the input_dev->name
variable according to the type of touchscreen used. Note that when we
introduced support for TSC2004 we started calling everything TSC200X, so
let's keep this quirk.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Gutman [Wed, 29 Jun 2016 16:51:35 +0000 (09:51 -0700)]
Input: xpad - validate USB endpoint count during probe
commit
caca925fca4fb30c67be88cacbe908eec6721e43 upstream.
This prevents a malicious USB device from causing an oops.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ping Cheng [Thu, 23 Jun 2016 17:54:17 +0000 (10:54 -0700)]
Input: wacom_w8001 - w8001_MAX_LENGTH should be 13
commit
12afb34400eb2b301f06b2aa3535497d14faee59 upstream.
Somehow the patch that added two-finger touch support forgot to update
W8001_MAX_LENGTH from 11 to 13.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Gutman [Thu, 23 Jun 2016 17:24:42 +0000 (10:24 -0700)]
Input: xpad - fix oops when attaching an unknown Xbox One gamepad
commit
c7f1429389ec1aa25e042bb13451385fbb596f8c upstream.
Xbox One controllers have multiple interfaces which all have the
same class, subclass, and protocol. One of the these interfaces
has only a single endpoint. When Xpad attempts to bind to this
interface, it causes an oops when trying initialize the output URB
by trying to access the second endpoint's descriptor.
This situation was avoided for known Xbox One devices by checking
the XTYPE constant associated with the VID and PID tuple. However,
this breaks when new or previously unknown Xbox One controllers
are attached to the system.
This change addresses the problem by deriving the XTYPE for Xbox
One controllers based on the interface protocol before checking
the interface number.
Fixes:
1a48ff81b391 ("Input: xpad - add support for Xbox One controllers")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Tue, 21 Jun 2016 23:09:00 +0000 (16:09 -0700)]
Input: elantech - add more IC body types to the list
commit
226ba707744a51acb4244724e09caacb1d96aed9 upstream.
The touchpad in HP Pavilion 14-
ab057ca reports it's version as 12 and
according to Elan both 11 and 12 are valid IC types and should be
identified as hw_version 4.
Reported-by: Patrick Lessard <Patrick.Lessard@cogeco.com>
Tested-by: Patrick Lessard <Patrick.Lessard@cogeco.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sinclair Yeh [Fri, 24 Jun 2016 00:37:34 +0000 (17:37 -0700)]
Input: vmmouse - remove port reservation
commit
60842ef8128e7bf58c024814cd0dc14319232b6c upstream.
The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This
causes the port to be reserved by the APCI module as the system comes up,
making it unavailable to be reserved again by other drivers, thus
preserving this VMWare port for special use in a VMWare guest.
This port is designed to be shared among multiple VMWare services, such as
the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port
on its own.
The VMWare non-EFI BIOS does not do this to preserve compatibility with
existing/legacy VMs. It is known that there is small chance a VM may be
configured such that these ports get reserved by other non-VMWare devices,
and if this ever happens, the result is undefined.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kangjie Lu [Tue, 3 May 2016 20:44:32 +0000 (16:44 -0400)]
ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt
commit
e4ec8cc8039a7063e24204299b462bd1383184a5 upstream.
The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kangjie Lu [Tue, 3 May 2016 20:44:20 +0000 (16:44 -0400)]
ALSA: timer: Fix leak in events via snd_timer_user_ccallback
commit
9a47e9cff994f37f7f0dbd9ae23740d0f64f9fe6 upstream.
The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kangjie Lu [Tue, 3 May 2016 20:44:07 +0000 (16:44 -0400)]
ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS
commit
cec8f96e49d9be372fdb0c3836dcf31ec71e457e upstream.
The stack object “tread” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Beulich [Thu, 7 Jul 2016 07:32:04 +0000 (01:32 -0600)]
xenbus: don't bail early from xenbus_dev_request_and_reply()
commit
7469be95a487319514adce2304ad2af3553d2fc9 upstream.
xenbus_dev_request_and_reply() needs to track whether a transaction is
open. For XS_TRANSACTION_START messages it calls transaction_start()
and for XS_TRANSACTION_END messages it calls transaction_end().
If sending an XS_TRANSACTION_START message fails or responds with an
an error, the transaction is not open and transaction_end() must be
called.
If sending an XS_TRANSACTION_END message fails, the transaction is
still open, but if an error response is returned the transaction is
closed.
Commit
027bd7e89906 ("xen/xenbus: Avoid synchronous wait on XenBus
stalling shutdown/restart") introduced a regression where failed
XS_TRANSACTION_START messages were leaving the transaction open. This
can cause problems with suspend (and migration) as all transactions
must be closed before suspending.
It appears that the problematic change was added accidentally, so just
remove it.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Beulich [Thu, 7 Jul 2016 07:23:57 +0000 (01:23 -0600)]
xenbus: don't BUG() on user mode induced condition
commit
0beef634b86a1350c31da5fcc2992f0d7c8a622b upstream.
Inability to locate a user mode specified transaction ID should not
lead to a kernel crash. For other than XS_TRANSACTION_START also
don't issue anything to xenbus if the specified ID doesn't match that
of any active transaction.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Grodzovsky [Tue, 21 Jun 2016 18:26:36 +0000 (14:26 -0400)]
xen/pciback: Fix conf_space read/write overlap check.
commit
02ef871ecac290919ea0c783d05da7eedeffc10e upstream.
Current overlap check is evaluating to false a case where a filter
field is fully contained (proper subset) of a r/w request. This
change applies classical overlap check instead to include all the
scenarios.
More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver
the logic is such that the entire confspace is read and written in 4
byte chunks. In this case as an example, CACHE_LINE_SIZE,
LATENCY_TIMER and PCI_BIST are arriving together in one call to
xen_pcibk_config_write() with offset == 0xc and size == 4. With the
exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length
== 1) is fully contained in the write request and hence is excluded
from write, which is incorrect.
Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineet Gupta [Tue, 28 Jun 2016 04:12:25 +0000 (09:42 +0530)]
ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)
commit
f52e126cc7476196f44f3c313b7d9f0699a881fc upstream.
With recent binutils update to support dwarf CFI pseudo-ops in gas, we
now get .eh_frame vs. .debug_frame. Although the call frame info is
exactly the same in both, the CIE differs, which the current kernel
unwinder can't cope with.
This broke both the kernel unwinder as well as loadable modules (latter
because of a new unhandled relo R_ARC_32_PCREL from .rela.eh_frame in
the module loader)
The ideal solution would be to switch unwinder to .eh_frame.
For now however we can make do by just ensureing .debug_frame is
generated by removing -fasynchronous-unwind-tables
.eh_frame generated with -gdwarf-2 -fasynchronous-unwind-tables
.debug_frame generated with -gdwarf-2
Fixes STAR
9001058196
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Brodkin [Thu, 23 Jun 2016 08:00:39 +0000 (11:00 +0300)]
arc: unwind: warn only once if DW2_UNWIND is disabled
commit
9bd54517ee86cb164c734f72ea95aeba4804f10b upstream.
If CONFIG_ARC_DW2_UNWIND is disabled every time arc_unwind_core()
gets called following message gets printed in debug console:
----------------->8---------------
CONFIG_ARC_DW2_UNWIND needs to be enabled
----------------->8---------------
That message makes sense if user indeed wants to see a backtrace or
get nice function call-graphs in perf but what if user disabled
unwinder for the purpose? Why pollute his debug console?
So instead we'll warn user about possibly missing feature once and
let him decide if that was what he or she really wanted.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Thu, 9 Jun 2016 12:20:05 +0000 (15:20 +0300)]
kernel/sysrq, watchdog, sched/core: Reset watchdog on all CPUs while processing sysrq-w
commit
57675cb976eff977aefb428e68e4e0236d48a9ff upstream.
Lengthy output of sysrq-w may take a lot of time on slow serial console.
Currently we reset NMI-watchdog on the current CPU to avoid spurious
lockup messages. Sometimes this doesn't work since softlockup watchdog
might trigger on another CPU which is waiting for an IPI to proceed.
We reset softlockup watchdogs on all CPUs, but we do this only after
listing all tasks, and this may be too late on a busy system.
So, reset watchdogs CPUs earlier, in for_each_process_thread() loop.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1465474805-14641-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Wed, 20 Jul 2016 22:45:08 +0000 (15:45 -0700)]
pps: do not crash when failed to register
commit
368301f2fe4b07e5fb71dba3cc566bc59eb6705f upstream.
With this command sequence:
modprobe plip
modprobe pps_parport
rmmod pps_parport
the partport_pps modules causes this crash:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: parport_detach+0x1d/0x60 [pps_parport]
Oops: 0000 [#1] SMP
...
Call Trace:
parport_unregister_driver+0x65/0xc0 [parport]
SyS_delete_module+0x187/0x210
The sequence that builds up to this is:
1) plip is loaded and takes the parport device for exclusive use:
plip0: Parallel port at 0x378, using IRQ 7.
2) pps_parport then fails to grab the device:
pps_parport: parallel port PPS client
parport0: cannot grant exclusive access for device pps_parport
pps_parport: couldn't register with parport0
3) rmmod of pps_parport is then killed because it tries to access
pardev->name, but pardev (taken from port->cad) is NULL.
So add a check for NULL in the test there too.
Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Vyukov [Thu, 14 Jul 2016 19:07:29 +0000 (12:07 -0700)]
vmlinux.lds: account for destructor sections
commit
e41f501d391265ff568f3e49d6128cc30856a36f upstream.
If CONFIG_KASAN is enabled and gcc is configured with
--disable-initfini-array and/or gold linker is used, gcc emits
.ctors/.dtors and .text.startup/.text.exit sections instead of
.init_array/.fini_array. .dtors section is not explicitly accounted in
the linker script and messes vvar/percpu layout.
We want:
ffffffff822bfd80 D _edata
ffffffff822c0000 D __vvar_beginning_hack
ffffffff822c0000 A __vvar_page
ffffffff822c0080 0000000000000098 D vsyscall_gtod_data
ffffffff822c1000 A __init_begin
ffffffff822c1000 D init_per_cpu__irq_stack_union
ffffffff822c1000 A __per_cpu_load
ffffffff822d3000 D init_per_cpu__gdt_page
We got:
ffffffff8279a600 D _edata
ffffffff8279b000 A __vvar_page
ffffffff8279c000 A __init_begin
ffffffff8279c000 D init_per_cpu__irq_stack_union
ffffffff8279c000 A __per_cpu_load
ffffffff8279e000 D __vvar_beginning_hack
ffffffff8279e080 0000000000000098 D vsyscall_gtod_data
ffffffff827ae000 D init_per_cpu__gdt_page
This happens because __vvar_page and .vvar get different addresses in
arch/x86/kernel/vmlinux.lds.S:
. = ALIGN(PAGE_SIZE);
__vvar_page = .;
.vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
/* work around gold bug 13023 */
__vvar_beginning_hack = .;
Discard .dtors/.fini_array/.text.exit, since we don't call dtors.
Merge .text.startup into init text.
Link: http://lkml.kernel.org/r/1467386363-120030-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mel Gorman [Thu, 14 Jul 2016 19:07:23 +0000 (12:07 -0700)]
mm, meminit: ensure node is online before checking whether pages are uninitialised
commit
ef70b6f41cda6270165a6f27b2548ed31cfa3cb2 upstream.
early_page_uninitialised looks up an arbitrary PFN. While a machine
without node 0 will boot with "mm, page_alloc: Always return a valid
node from early_pfn_to_nid", it works because it assumes that nodes are
always in PFN order. This is not guaranteed so this patch adds
robustness by always checking if the node being checked is online.
Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mel Gorman [Thu, 14 Jul 2016 19:07:20 +0000 (12:07 -0700)]
mm, meminit: always return a valid node from early_pfn_to_nid
commit
e4568d3803852d00effd41dcdd489e726b998879 upstream.
early_pfn_to_nid can return node 0 if a PFN is invalid on machines that
has no node 0. A machine with only node 1 was observed to crash with
the following message:
BUG: unable to handle kernel paging request at
000000000002a3c8
PGD 0
Modules linked in:
Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011 06/30/2006
task:
ffffffff81c0d500 ti:
ffffffff81c00000 task.ti:
ffffffff81c00000
RIP: reserve_bootmem_region+0x6a/0xef
CR2:
000000000002a3c8 CR3:
0000000001c06000 CR4:
00000000000006b0
Call Trace:
free_all_bootmem+0x4b/0x12a
mem_init+0x70/0xa3
start_kernel+0x25b/0x49b
The problem is that early_page_uninitialised uses the early_pfn_to_nid
helper which returns node 0 for invalid PFNs. No caller of
early_pfn_to_nid cares except early_page_uninitialised. This patch has
early_pfn_to_nid always return a valid node.
Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Rientjes [Thu, 14 Jul 2016 19:06:50 +0000 (12:06 -0700)]
mm, compaction: prevent VM_BUG_ON when terminating freeing scanner
commit
a46cbf3bc53b6a93fb84a5ffb288c354fa807954 upstream.
It's possible to isolate some freepages in a pageblock and then fail
split_free_page() due to the low watermark check. In this case, we hit
VM_BUG_ON() because the freeing scanner terminated early without a
contended lock or enough freepages.
This should never have been a VM_BUG_ON() since it's not a fatal
condition. It should have been a VM_WARN_ON() at best, or even handled
gracefully.
Regardless, we need to terminate anytime the full pageblock scan was not
done. The logic belongs in isolate_freepages_block(), so handle its
state gracefully by terminating the pageblock loop and making a note to
restart at the same pageblock next time since it was not possible to
complete the scan this time.
[rientjes@google.com: don't rescan pages in a pageblock]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1607111244150.83138@chino.kir.corp.google.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606291436300.145590@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Tested-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Torsten Hilbrich [Fri, 24 Jun 2016 21:50:18 +0000 (14:50 -0700)]
fs/nilfs2: fix potential underflow in call to crc32_le
commit
63d2f95d63396059200c391ca87161897b99e74a upstream.
The value `bytes' comes from the filesystem which is about to be
mounted. We cannot trust that the value is always in the range we
expect it to be.
Check its value before using it to calculate the length for the crc32_le
call. It value must be larger (or equal) sumoff + 4.
This fixes a kernel bug when accidentially mounting an image file which
had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance.
The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a
s_bytes value of 1. This caused an underflow when substracting sumoff +
4 (20) in the call to crc32_le.
BUG: unable to handle kernel paging request at
ffff88021e600000
IP: crc32_le+0x36/0x100
...
Call Trace:
nilfs_valid_sb.part.5+0x52/0x60 [nilfs2]
nilfs_load_super_block+0x142/0x300 [nilfs2]
init_nilfs+0x60/0x390 [nilfs2]
nilfs_mount+0x302/0x520 [nilfs2]
mount_fs+0x38/0x160
vfs_kern_mount+0x67/0x110
do_mount+0x269/0xe00
SyS_mount+0x9f/0x100
entry_SYSCALL_64_fastpath+0x16/0x71
Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Rientjes [Fri, 24 Jun 2016 21:50:10 +0000 (14:50 -0700)]
mm, compaction: abort free scanner if split fails
commit
a4f04f2c6955aff5e2c08dcb40aca247ff4d7370 upstream.
If the memory compaction free scanner cannot successfully split a free
page (only possible due to per-zone low watermark), terminate the free
scanner rather than continuing to scan memory needlessly. If the
watermark is insufficient for a free page of order <= cc->order, then
terminate the scanner since all future splits will also likely fail.
This prevents the compaction freeing scanner from scanning all memory on
very large zones (very noticeable for zones > 128GB, for instance) when
all splits will likely fail while holding zone->lock.
compaction_alloc() iterating a 128GB zone has been benchmarked to take
over 400ms on some systems whereas any free page isolated and ready to
be split ends up failing in split_free_page() because of the low
watermark check and thus the iteration continues.
The next time compaction occurs, the freeing scanner will likely start
at the end of the zone again since no success was made previously and we
get the same lengthy iteration until the zone is brought above the low
watermark. All thp page faults can take >400ms in such a state without
this fix.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606211820350.97086@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mel Gorman [Fri, 24 Jun 2016 21:49:37 +0000 (14:49 -0700)]
mm, sl[au]b: add __GFP_ATOMIC to the GFP reclaim mask
commit
e838a45f9392a5bd2be1cd3ab0b16ae85857461c upstream.
Commit
d0164adc89f6 ("mm, page_alloc: distinguish between being unable
to sleep, unwilling to sleep and avoiding waking kswapd") modified
__GFP_WAIT to explicitly identify the difference between atomic callers
and those that were unwilling to sleep. Later the definition was
removed entirely.
The GFP_RECLAIM_MASK is the set of flags that affect watermark checking
and reclaim behaviour but __GFP_ATOMIC was never added. Without it,
atomic users of the slab allocator strip the __GFP_ATOMIC flag and
cannot access the page allocator atomic reserves. This patch addresses
the problem.
The user-visible impact depends on the workload but potentially atomic
allocations unnecessarily fail without this path.
Link: http://lkml.kernel.org/r/20160610093832.GK2527@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ludovic Desroches [Thu, 12 May 2016 14:54:10 +0000 (16:54 +0200)]
dmaengine: at_xdmac: double FIFO flush needed to compute residue
commit
9295c41d77ca93aac79cfca6fa09fa1ca5cab66f upstream.
Due to the way CUBC register is updated, a double flush is needed to
compute an accurate residue. First flush aim is to get data from the DMA
FIFO and second one ensures that we won't report data which are not in
memory.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel
eXtended DMA Controller driver")
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ludovic Desroches [Thu, 12 May 2016 14:54:09 +0000 (16:54 +0200)]
dmaengine: at_xdmac: fix residue corruption
commit
53398f488821c2b5b15291e3debec6ad33f75d3d upstream.
An unexpected value of CUBC can lead to a corrupted residue. A more
complex sequence is needed to detect an inaccurate value for NCA or CUBC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel
eXtended DMA Controller driver")
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ludovic Desroches [Thu, 12 May 2016 14:54:08 +0000 (16:54 +0200)]
dmaengine: at_xdmac: align descriptors on 64 bits
commit
4a9723e8df68cfce4048517ee32e37f78854b6fb upstream.
Having descriptors aligned on 64 bits allows update CNDA and CUBC in an
atomic way.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel
eXtended DMA Controller driver")
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Sun, 12 Jun 2016 10:31:53 +0000 (12:31 +0200)]
x86/quirks: Add early quirk to reset Apple AirPort card
commit
abb2bafd295fe962bbadc329dbfb2146457283ac upstream.
The EFI firmware on Macs contains a full-fledged network stack for
downloading OS X images from osrecovery.apple.com. Unfortunately
on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331
wireless card on every boot and leaves it enabled even after
ExitBootServices has been called. The card continues to assert its IRQ
line, causing spurious interrupts if the IRQ is shared. It also corrupts
memory by DMAing received packets, allowing for remote code execution
over the air. This only stops when a driver is loaded for the wireless
card, which may be never if the driver is not installed or blacklisted.
The issue seems to be constrained to the Broadcom 4331. Chris Milsted
has verified that the newer Broadcom 4360 built into the MacBookPro11,3
(2013/2014) does not exhibit this behaviour. The chances that Apple will
ever supply a firmware fix for the older machines appear to be zero.
The solution is to reset the card on boot by writing to a reset bit in
its mmio space. This must be done as an early quirk and not as a plain
vanilla PCI quirk to successfully combat memory corruption by DMAed
packets: Matthew Garrett found out in 2012 that the packets are written
to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html).
This type of memory is made available to the page allocator by
efi_free_boot_services(). Plain vanilla PCI quirks run much later, in
subsys initcall level. In-between a time window would be open for memory
corruption. Random crashes occurring in this time window and attributed
to DMAed packets have indeed been observed in the wild by Chris
Bainbridge.
When Matthew Garrett analyzed the memory corruption issue in 2012, he
sought to fix it with a grub quirk which transitions the card to D3hot:
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=
9d34bb85da56
This approach does not help users with other bootloaders and while it
may prevent DMAed packets, it does not cure the spurious interrupts
emanating from the card. Unfortunately the card's mmio space is
inaccessible in D3hot, so to reset it, we have to undo the effect of
Matthew's grub patch and transition the card back to D0.
Note that the quirk takes a few shortcuts to reduce the amount of code:
The size of BAR 0 and the location of the PM capability is identical
on all affected machines and therefore hardcoded. Only the address of
BAR 0 differs between models. Also, it is assumed that the BCMA core
currently mapped is the 802.11 core. The EFI driver seems to always take
care of this.
Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback
towards finding the best solution to this problem.
The following should be a comprehensive list of affected models:
iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16]
iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16]
Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12]
Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12]
Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12]
Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12]
Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12]
MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12]
MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12]
MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12]
MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12]
MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12]
MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12]
MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12]
For posterity, spurious interrupts caused by the Broadcom 4331 wireless
card resulted in splats like this (stacktrace omitted):
irq 17: nobody cared (try booting with the "irqpoll" option)
handlers:
[<
ffffffff81374370>] pcie_isr
[<
ffffffffc0704550>] sdhci_irq [sdhci] threaded [<
ffffffffc07013c0>] sdhci_thread_irq [sdhci]
[<
ffffffffc0a0b960>] azx_interrupt [snd_hda_codec]
Disabling IRQ #17
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
1009819
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
1098621
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
1149632#c5
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
1279130
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
1332732
Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1]
Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1]
Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2]
Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1]
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chris Milsted <cmilsted@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Michael Buesch <m@bues.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: b43-dev@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de
[ Did minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Sun, 12 Jun 2016 10:31:53 +0000 (12:31 +0200)]
x86/quirks: Reintroduce scanning of secondary buses
commit
850c321027c2e31d0afc71588974719a4b565550 upstream.
We used to scan secondary buses until the following commit that
was applied in 2009:
8659c406ade3 ("x86: only scan the root bus in early PCI quirks")
which commit constrained early quirks to the root bus only. Its
motivation was to prevent application of the nvidia_bugs quirk
on secondary buses.
We're about to add a quirk to reset the Broadcom 4331 wireless card on
2011/2012 Macs, which is located on a secondary bus behind a PCIe root
port. To facilitate that, reintroduce scanning of secondary buses.
The commit message of
8659c406ade3 notes that scanning only the root bus
"saves quite some unnecessary scanning work". The algorithm used prior
to
8659c406ade3 was particularly time consuming because it scanned
buses 0 to 31 brute force. To avoid lengthening boot time, employ a
recursive strategy which only scans buses that are actually reachable
from the root bus.
Yinghai Lu pointed out that the secondary bus number read from a
bridge's config space may be invalid, in particular a value of 0 would
cause an infinite loop. The PCI core goes beyond that and recurses to a
child bus only if its bus number is greater than the parent bus number
(see pci_scan_bridge()). Since the root bus is numbered 0, this implies
that secondary buses may not be 0. Do the same on early scanning.
If this algorithm is found to significantly impact boot time or cause
infinite loops on broken hardware, it would be possible to limit its
recursion depth: The Broadcom 4331 quirk applies at depth 1, all others
at depth 0, so the bus need not be scanned deeper than that for now. An
alternative approach would be to revert to scanning only the root bus,
and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12
and 8086:1e16. Apple always positioned the card behind either of these
three ports. The quirk would then check presence of the card in slot 0
below the root port and do its deed.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/f0daa70dac1a9b2483abdb31887173eb6ab77bdf.1465690253.git.lukas@wunner.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Sun, 12 Jun 2016 10:31:53 +0000 (12:31 +0200)]
x86/quirks: Apply nvidia_bugs quirk only on root bus
commit
447d29d1d3aed839e74c2401ef63387780ac51ed upstream.
Since the following commit:
8659c406ade3 ("x86: only scan the root bus in early PCI quirks")
... early quirks are only applied to devices on the root bus.
The motivation was to prevent application of the nvidia_bugs quirk on
secondary buses.
We're about to reintroduce scanning of secondary buses for a quirk to
reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent
regressions, open code the requirement to apply nvidia_bugs only on the
root bus.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/4d5477c1d76b2f0387a780f2142bbcdd9fee869b.1465690253.git.lukas@wunner.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michał Pecio [Tue, 7 Jun 2016 10:34:45 +0000 (12:34 +0200)]
USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails
commit
c66f59ee5050447b3da92d36f5385a847990a894 upstream.
Since ed_schedule begins with marking the ED as "operational",
the ED may be left in such state even if scheduling actually
fails.
This allows future submission attempts to smuggle this ED to the
hardware behind the scheduler's back and without linking it to
the ohci->eds_in_use list.
The former causes bandwidth saturation and data loss on isoc
endpoints, the latter crashes the kernel when attempt is made
to unlink such ED from this list.
Fix ed_schedule to update ED state only on successful return.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 27 Jul 2016 16:48:30 +0000 (09:48 -0700)]
Linux 4.4.16
Miklos Szeredi [Mon, 21 Mar 2016 16:31:44 +0000 (17:31 +0100)]
ovl: verify upper dentry before unlink and rename
commit
11f3710417d026ea2f4fcf362d866342c5274185 upstream.
Unlink and rename in overlayfs checked the upper dentry for staleness by
verifying upper->d_parent against upperdir. However the dentry can go
stale also by being unhashed, for example.
Expand the verification to actually look up the name again (under parent
lock) and check if it matches the upper dentry. This matches what the VFS
does before passing the dentry to filesytem's unlink/rename methods, which
excludes any inconsistency caused by overlayfs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Kahola [Mon, 20 Jun 2016 08:10:26 +0000 (11:10 +0300)]
drm/i915: Revert DisplayPort fast link training feature
commit
34511dce4b35685d3988d5c8b100d11a068db5bd upstream.
It has been found out that in some HW combination the DisplayPort
fast link training feature caused screen flickering. Let's revert
this feature for now until we can ensure that the feature works for
all platforms.
This is a manual revert of commits
5fa836a9d859 ("drm/i915: DP link
training optimization") and
4e96c97742f4 ("drm/i915: eDP link training
optimization").
Fixes:
5fa836a9d859 ("drm/i915: DP link training optimization")
Fixes:
4e96c97742f4 ("drm/i915: eDP link training optimization")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit
91df09d92ad82c8778ca218097bf827f154292ca)
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Sun, 10 Jul 2016 23:46:32 +0000 (16:46 -0700)]
tmpfs: fix regression hang in fallocate undo
commit
7f556567036cb7f89aabe2f0954b08566b4efb53 upstream.
The well-spotted fallocate undo fix is good in most cases, but not when
fallocate failed on the very first page. index 0 then passes lend -1
to shmem_undo_range(), and that has two bad effects: (a) that it will
undo every fallocation throughout the file, unrestricted by the current
range; but more importantly (b) it can cause the undo to hang, because
lend -1 is treated as truncation, which makes it keep on retrying until
every page has gone, but those already fully instantiated will never go
away. Big thank you to xfstests generic/269 which demonstrates this.
Fixes:
b9b4bb26af01 ("tmpfs: don't undo fallocate past its last page")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anthony Romano [Fri, 24 Jun 2016 21:48:43 +0000 (14:48 -0700)]
tmpfs: don't undo fallocate past its last page
commit
b9b4bb26af017dbe930cd4df7f9b2fc3a0497bfe upstream.
When fallocate is interrupted it will undo a range that extends one byte
past its range of allocated pages. This can corrupt an in-use page by
zeroing out its first byte. Instead, undo using the inclusive byte
range.
Fixes:
1635f6a74152f1d ("tmpfs: undo fallocation on failure")
Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.com
Signed-off-by: Anthony Romano <anthony.romano@coreos.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Brandon Philips <brandon@ifup.co>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Stancek [Thu, 30 Jun 2016 10:23:51 +0000 (12:23 +0200)]
crypto: qat - make qat_asym_algs.o depend on asn1 headers
commit
81dc0365cfa7bc7c08a0e44d9ee04964df782e19 upstream.
Parallel build can sporadically fail because asn1 headers may
not be built yet by the time qat_asym_algs.o is compiled:
drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory
#include "qat_rsapubkey-asn1.h"
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Beulich [Fri, 8 Jul 2016 12:15:07 +0000 (06:15 -0600)]
xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7
commit
6f2d9d99213514360034c6d52d2c3919290b3504 upstream.
As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and
CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on
both Intel and AMD systems. Doing any kind of hardware capability
checks in the driver as a prerequisite was wrong anyway: With the
hypervisor being in charge, all such checking should be done by it. If
ACPI data gets uploaded despite some missing capability, the hypervisor
is free to ignore part or all of that data.
Ditch the entire check_prereq() function, and do the only valid check
(xen_initial_domain()) in the caller in its place.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Thu, 23 Jun 2016 02:07:32 +0000 (21:07 -0500)]
File names with trailing period or space need special case conversion
commit
45e8a2583d97ca758a55c608f78c4cef562644d1 upstream.
POSIX allows files with trailing spaces or a trailing period but
SMB3 does not, so convert these using the normal Services For Mac
mapping as we do for other reserved characters such as
: < > | ? *
This is similar to what Macs do for the same problem over SMB3.
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jerome Marchand [Thu, 26 May 2016 09:52:25 +0000 (11:52 +0200)]
cifs: dynamic allocation of ntlmssp blob
commit
b8da344b74c822e966c6d19d6b2321efe82c5d97 upstream.
In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated
statically and its size is an "empirical" 5*sizeof(struct
_AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value
comes from or if it was ever appropriate, but it is currently
insufficient: the user and domain name in UTF16 could take 1kB by
themselves. Because of that, build_ntlmssp_auth_blob() might corrupt
memory (out-of-bounds write). The size of ntlmssp_blob in
SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE)
+ 500).
This patch allocates the blob dynamically in
build_ntlmssp_auth_blob().
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Thu, 23 Jun 2016 01:12:05 +0000 (20:12 -0500)]
Fix reconnect to not defer smb3 session reconnect long after socket reconnect
commit
4fcd1813e6404dd4420c7d12fb483f9320f0bf93 upstream.
Azure server blocks clients that open a socket and don't do anything on it.
In our reconnect scenarios, we can reconnect the tcp session and
detect the socket is available but we defer the negprot and SMB3 session
setup and tree connect reconnection until the next i/o is requested, but
this looks suspicous to some servers who expect SMB3 negprog and session
setup soon after a socket is created.
In the echo thread, reconnect SMB3 sessions and tree connections
that are disconnected. A later patch will replay persistent (and
resilient) handle opens.
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Bottomley [Tue, 14 Jun 2016 05:00:07 +0000 (22:00 -0700)]
53c700: fix BUG on untagged commands
commit
8beb330044d0d1878c7b92290e91c0b889e92633 upstream.
The untagged command case in the 53c700 driver has been broken since
host wide tags were enabled because the replaced scsi_find_tag()
function had a special case for the tag value SCSI_NO_TAG to retrieve
sdev->current_cmnd. The replacement function scsi_host_find_tag() has
no such special case and returns NULL causing untagged commands to
trigger a BUG() in the driver. Inspection shows that the 53c700 is the
only driver using this SCSI_NO_TAG case, so a local fix in the driver
suffices to fix this problem globally.
Fixes:
64d513ac31b - "scsi: use host wide tags by default"
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Schwidefsky [Mon, 27 Jun 2016 15:06:45 +0000 (17:06 +0200)]
s390: fix test_fp_ctl inline assembly contraints
commit
bcf4dd5f9ee096bd1510f838dd4750c35df4e38b upstream.
The test_fp_ctl function is used to test if a given value is a valid
floating-point control. The inline assembly in test_fp_ctl uses an
incorrect constraint for the 'orig_fpc' variable. If the compiler
chooses the same register for 'fpc' and 'orig_fpc' the test_fp_ctl()
function always returns true. This allows user space to trigger
kernel oopses with invalid floating-point control values on the
signal stack.
This problem has been introduced with git commit
4725c86055f5bbdcdf
"s390: fix save and restore of the floating-point-control register"
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Fang [Tue, 7 Jun 2016 06:53:56 +0000 (14:53 +0800)]
scsi: fix race between simultaneous decrements of ->host_failed
commit
72d8c36ec364c82bf1bf0c64dfa1041cfaf139f7 upstream.
sas_ata_strategy_handler() adds the works of the ata error handler to
system_unbound_wq. This workqueue asynchronously runs work items, so the
ata error handler will be performed concurrently on different CPUs. In
this case, ->host_failed will be decreased simultaneously in
scsi_eh_finish_cmd() on different CPUs, and become abnormal.
It will lead to permanently inequality between ->host_failed and
->host_busy, and scsi error handler thread won't start running. IO
errors after that won't be handled.
Since all scmds must have been handled in the strategy handler, just
remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after
the strategy handler to fix this race.
Fixes:
50824d6c5657 ("[SCSI] libsas: async ata-eh")
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxim Patlasov [Fri, 22 Jul 2016 01:24:26 +0000 (18:24 -0700)]
ovl: verify upper dentry in ovl_remove_and_whiteout()
commit
cfc9fde0b07c3b44b570057c5f93dda59dca1c94 upstream.
The upper dentry may become stale before we call ovl_lock_rename_workdir.
For example, someone could (mistakenly or maliciously) manually unlink(2)
it directly from upperdir.
To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir
and and check if it matches the upper dentry.
Essentially, it is the same problem and similar solution as in
commit
11f3710417d0 ("ovl: verify upper dentry before unlink and rename").
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vivek Goyal [Fri, 1 Jul 2016 20:34:25 +0000 (16:34 -0400)]
ovl: Copy up underlying inode's ->i_mode to overlay inode
commit
07a2daab49c549a37b5b744cbebb6e3f445f12bc upstream.
Right now when a new overlay inode is created, we initialize overlay
inode's ->i_mode from underlying inode ->i_mode but we retain only
file type bits (S_IFMT) and discard permission bits.
This patch changes it and retains permission bits too. This should allow
overlay to do permission checks on overlay inode itself in task context.
[SzM] It also fixes clearing suid/sgid bits on write.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes:
4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Thu, 16 Jun 2016 13:42:25 +0000 (15:42 +0200)]
ARM: mvebu: fix HW I/O coherency related deadlocks
commit
c5379ba8fccd99d5f99632c789f0393d84a57805 upstream.
Until now, our understanding for HW I/O coherency to work on the
Cortex-A9 based Marvell SoC was that only the PCIe regions should be
mapped strongly-ordered. However, we were still encountering some
deadlocks, especially when testing the CESA crypto engine. After
checking with the HW designers, it was concluded that all the MMIO
registers should be mapped as strongly ordered for the HW I/O coherency
mechanism to work properly.
This fixes some easy to reproduce deadlocks with the CESA crypto engine
driver (dmcrypt on a sufficiently large disk partition).
Tested-by: Terry Stockert <stockert@inkblotadmirer.me>
Tested-by: Romain Perier <romain.perier@free-electrons.com>
Cc: Terry Stockert <stockert@inkblotadmirer.me>
Cc: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Petazzoni [Thu, 16 Jun 2016 13:42:27 +0000 (15:42 +0200)]
ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
commit
929e604efa3dc0522214e0dc18984be23993e9f0 upstream.
When the support for the Marvell crypto engine was added in the Device
Tree of the various Armada 385 Device Tree files in commit
d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x
boards"), a typo was made in the MBus window attributes for the Armada
385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit
fixes this typo, which makes the CESA engines operational on Armada 385
Linksys boards.
Reported-by: Terry Stockert <stockert@inkblotadmirer.me>
Cc: Terry Stockert <stockert@inkblotadmirer.me>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes:
d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Wed, 15 Jun 2016 11:20:19 +0000 (13:20 +0200)]
ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
commit
5fc39d347267bd029fcc9099c70e2fe2d53130e9 upstream.
The sun4i-timer driver registers its sched_clock only if the machine is
compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or
"allwinner,sun4i-a10".
Add the missing "allwinner,sun5i-a13" string to the machine compatible.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes:
465a225fb2af ("ARM: sun5i: Add C.H.I.P DTS")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Awais Belal [Tue, 12 Jul 2016 10:21:28 +0000 (15:21 +0500)]
ALSA: hda: add AMD Stoney PCI ID with proper driver caps
commit
d716fb03f76411fc7e138692e33b749cada5c094 upstream.
This allows the device to correctly show up as ATI HDMI
rather than a generic one and allows the driver to use
the available caps.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Wu [Mon, 11 Jul 2016 17:51:06 +0000 (19:51 +0200)]
ALSA: hda - fix use-after-free after module unload
commit
ab58d8cc870ef3f0771c197700441936898d1f1d upstream.
register_vga_switcheroo() sets the PM ops from the hda structure which
is freed later in azx_free. Make sure that these ops are cleared.
Caught by KASAN, initially noticed due to a general protection fault.
Fixes:
246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)")
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 8 Jul 2016 06:05:19 +0000 (08:05 +0200)]
ALSA: ctl: Stop notification after disconnection
commit
f388cdcdd160687c6650833f286b9c89c50960ff upstream.
snd_ctl_remove() has a notification for the removal event. It's
superfluous when done during the device got disconnected. Although
the notification itself is mostly harmless, it may potentially be
harmful, and should be suppressed. Actually some components PCM may
free ctl elements during the disconnect or free callbacks, thus it's
no theoretical issue.
This patch adds the check of card->shutdown flag for avoiding
unnecessary notifications after (or during) the disconnect.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 8 Jul 2016 06:23:43 +0000 (08:23 +0200)]
ALSA: pcm: Free chmap at PCM free callback, too
commit
a8ff48cb70835f48de5703052760312019afea55 upstream.
The chmap ctls assigned to PCM streams are freed in the PCM disconnect
callback. However, since the disconnect callback isn't called when
the card gets freed before registering, the chmap ctls may still be
left assigned. They are eventually freed together with other ctls,
but it may cause an Oops at pcm_chmap_ctl_private_free(), as the
function refers to the assigned PCM stream, while the PCM objects have
been already freed beforehand.
The fix is to free the chmap ctls also at PCM free callback, not only
at PCM disconnect.
Reported-by: Laxminath Kasam <b_lkasam@codeaurora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Fri, 8 Jul 2016 06:26:57 +0000 (14:26 +0800)]
ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
commit
8a132099f080d7384bb6ab4cc168f76cb4b47d08 upstream.
We have some Dell laptops which can't detect headset mic, the machines
use the codec ALC225, they have some new pin configuration values,
after adding them in the alc225 pin quirk table, they work well.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Copeland [Sat, 25 Jun 2016 11:58:45 +0000 (07:58 -0400)]
ALSA: hda - fix read before array start
commit
81e43960dce1c8e58e682fb3ec26c1d8f83a9afc upstream.
UBSAN reports the following warning from accessing path->path[-1]
in set_path_power():
[ 16.078040] ================================================================================
[ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17
[ 16.078198] index -1 is out of range for type 'hda_nid_t [10]'
[ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47
[ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012
[ 16.078278]
ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032
[ 16.078286]
ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d
[ 16.078294]
ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292
[ 16.078302] Call Trace:
[ 16.078311] [<
ffffffff815c4fe3>] dump_stack+0x86/0xd3
[ 16.078317] [<
ffffffff8162443d>] ubsan_epilogue+0xd/0x40
[ 16.078324] [<
ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70
[ 16.078335] [<
ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic]
[ 16.078344] [<
ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic]
[ 16.078352] [<
ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic]
[ 16.078360] [<
ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic]
[ 16.078370] [<
ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic]
[ 16.078376] [<
ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0
[ 16.078390] [<
ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek]
[ 16.078402] [<
ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek]
[ 16.078417] [<
ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec]
[ 16.078424] [<
ffffffff817bbac1>] driver_probe_device+0x101/0x380
[ 16.078430] [<
ffffffff817bbdf9>] __driver_attach+0xb9/0x100
[ 16.078438] [<
ffffffff817bbd40>] ? driver_probe_device+0x380/0x380
[ 16.078444] [<
ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0
[ 16.078449] [<
ffffffff817bb087>] driver_attach+0x27/0x50
[ 16.078454] [<
ffffffff817ba956>] bus_add_driver+0x166/0x2c0
[ 16.078460] [<
ffffffffa0369000>] ? 0xffffffffa0369000
[ 16.078465] [<
ffffffff817bd13d>] driver_register+0x7d/0x130
[ 16.078477] [<
ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec]
[ 16.078488] [<
ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek]
[ 16.078493] [<
ffffffff8100215e>] do_one_initcall+0x4e/0x1d0
[ 16.078499] [<
ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80
[ 16.078504] [<
ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560
[ 16.078510] [<
ffffffff812bb314>] ? do_init_module+0x28/0x273
[ 16.078515] [<
ffffffff812bb387>] do_init_module+0x9b/0x273
[ 16.078522] [<
ffffffff811e3782>] load_module+0x20b2/0x3410
[ 16.078527] [<
ffffffff811df140>] ? m_show+0x210/0x210
[ 16.078533] [<
ffffffff813b2b26>] ? kernel_read+0x66/0xe0
[ 16.078541] [<
ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0
[ 16.078547] [<
ffffffff811e4d1e>] SyS_finit_module+0xe/0x10
[ 16.078552] [<
ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd
[ 16.078556] ================================================================================
Fix by checking path->depth before use.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vinod Koul [Wed, 29 Jun 2016 04:57:52 +0000 (10:27 +0530)]
ALSA: hda - Add PCI ID for Kabylake-H
commit
6858107e78b4ecb9f244db814ffbdba1b5ce759b upstream.
Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this
earlier with other KBL IDs.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Torsten Hilbrich [Tue, 5 Jul 2016 08:40:22 +0000 (10:40 +0200)]
ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup
commit
9cd25743765cfe851aed8d655a62d60156aed293 upstream.
This solves the issue that a headphone is not working on the docking
unit.
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 4 Jul 2016 12:02:15 +0000 (14:02 +0200)]
ALSA: timer: Fix negative queue usage by racy accesses
commit
3fa6993fef634e05d200d141a85df0b044572364 upstream.
The user timer tu->qused counter may go to a negative value when
multiple concurrent reads are performed since both the check and the
decrement of tu->qused are done in two individual locked contexts.
This results in bogus read outs, and the endless loop in the
user-space side.
The fix is to move the decrement of the tu->qused counter into the
same spinlock context as the zero-check of the counter.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Mon, 27 Jun 2016 19:06:51 +0000 (21:06 +0200)]
ALSA: echoaudio: Fix memory allocation
commit
9c6795a9b3cbb56a9fbfaf43909c5c22999ba317 upstream.
'commpage_bak' is allocated with 'sizeof(struct echoaudio)' bytes.
We then copy 'sizeof(struct comm_page)' bytes in it.
On my system, smatch complains because one is 2960 and the other is 3072.
This would result in memory corruption or a oops.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 29 Jun 2016 13:23:08 +0000 (15:23 +0200)]
ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift()
commit
62db7152c924e4c060e42b34a69cd39658e8a0dc upstream.
vortex_wtdma_bufshift() function does calculate the page index
wrongly, first masking then shift, which always results in zero.
The proper computation is to first shift, then mask.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaroslav Kysela [Fri, 24 Jun 2016 13:13:16 +0000 (15:13 +0200)]
ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup
commit
0f087ee3f3b86a4507db4ff1d2d5a3880e4cfd16 upstream.
See: https://bugzilla.redhat.com/show_bug.cgi?id=
1349539
See: https://bugzilla.kernel.org/show_bug.cgi?id=120961
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Woodrow Shen [Fri, 24 Jun 2016 07:58:34 +0000 (15:58 +0800)]
ALSA: hda - Fix the headset mic jack detection on Dell machine
commit
f83c32925d45926cd0e0f18bf28e6039116c4486 upstream.
The new Dell laptop with codec 3246 can't detect headset mic when
headset was inserted on the machine. So adding pin configurations
into quirk table makes headset mic work correctly.
Codec: Realtek ALC3246
Vendor Id: 0x10ec0256
Subsystem Id: 0x10280781
Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 24 Jun 2016 13:15:26 +0000 (15:15 +0200)]
ALSA: dummy: Fix a use-after-free at closing
commit
d5dbbe6569481bf12dcbe3e12cff72c5f78d272c upstream.
syzkaller fuzzer spotted a potential use-after-free case in snd-dummy
driver when hrtimer is used as backend:
> ==================================================================
> BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr
ffff88005e5b6f68
> Read of size 8 by task syz-executor/8984
> =============================================================================
> BUG kmalloc-192 (Not tainted): kasan: bad access detected
> -----------------------------------------------------------------------------
>
> Disabling lock debugging due to kernel taint
> INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=
18446705582212484632
> ....
> [< none >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464
> ....
> INFO: Freed in 0xfffd8e09 age=
18446705496313138713 cpu=
2164287125 pid=-1
> [< none >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481
> ....
> Call Trace:
> [<
ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333
> [< inline >] rb_set_parent include/linux/rbtree_augmented.h:111
> [< inline >] __rb_erase_augmented include/linux/rbtree_augmented.h:218
> [<
ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427
> [<
ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86
> [<
ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903
> [< inline >] remove_hrtimer kernel/time/hrtimer.c:945
> [<
ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046
> [<
ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066
> [<
ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417
> [<
ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507
> [<
ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106
> [<
ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956
> [<
ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974
> [< inline >] snd_pcm_stop sound/core/pcm_native.c:1139
> [<
ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784
> [<
ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805
> [<
ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976
> [<
ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020
> [<
ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693
> [<
ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483
> .....
A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which
is called certainly before other blocking ops.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Fri, 17 Jun 2016 22:54:47 +0000 (00:54 +0200)]
hwmon: (dell-smm) Cache fan_type() calls and change fan detection
commit
5ce91714b0d8c0a3ff9b858966721f508351cf4c upstream.
On more Dell machines (e.g. Dell Precision M3800) fan_type() call is too
expensive (CPU is too long in SMM mode) and cause kernel to hang. This is
bug in Dell SMM or BIOS.
This patch caches type for each fan (as it should not change) and changes
the way how fan presense is detected. First it try function fan_status()
as was before commit
f989e55452c7 ("i8k: Add support for fan labels"). And
if that fails fallback to fan_type(). *_status() functions can fail in case
fan is not currently accessible (e.g. present on GPU which is currently
turned off).
Reported-by: Tolga Cakir <cevelnet@gmail.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=112021
Tested-by: Tolga Cakir <cevelnet@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Fri, 17 Jun 2016 22:54:46 +0000 (00:54 +0200)]
hwmon: (dell-smm) Disallow fan_type() calls on broken machines
commit
2744d2fde00dc8bcc3679eb72c81a63058e90faa upstream.
Some Dell machines have especially broken SMM or BIOS which cause that once
fan_type() is called then CPU fan speed going randomly up and down. And for
fixing this behaviour reboot is required.
So this patch creates fan_type blacklist of affected Dell machines and
disallow fan_type() call on them to prevent that erratic behaviour.
Old blacklist which disabled loading driver on some machines added in
commits
a4b45b25f18d ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8100")
and
6220f4ebd7b4 ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8000") were
moved to FAN_TYPE blacklist.
Reported-by: Jan C Peters <jcpeters89@gmail.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100121
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Fri, 17 Jun 2016 22:54:45 +0000 (00:54 +0200)]
hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default
commit
7613663cc186f8f3c50279390ddc60286758001c upstream.
For security reasons ordinary user must not be able to control fan speed
via /proc/i8k by default. Some malicious software running under "nobody"
user could be able to turn fan off and cause HW problems. So this patch
changes default value of "restricted" parameter to 1.
Also restrict reading of DMI_PRODUCT_SERIAL from /proc/i8k via "restricted"
parameter. It is because non root user cannot read DMI_PRODUCT_SERIAL from
sysfs file /sys/class/dmi/id/product_serial.
Old non secure behaviour of file /proc/i8k can be achieved by loading this
module with "restricted" parameter set to 0.
Note that this patch has effects only for kernels compiled with CONFIG_I8K
and only for file /proc/i8k. Hwmon interface provided by this driver was
not changed and root access for setting fan speed was needed also before.
Reported-by: Mario Limonciello <Mario_Limonciello@dell.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Mon, 27 Jun 2016 21:12:34 +0000 (14:12 -0700)]
tty/vt/keyboard: fix OOB access in do_compute_shiftstate()
commit
510cccb5b0c8868a2b302a0ab524da7912da648b upstream.
The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS,
which is currently 256, whereas number of keys/buttons in input device (and
therefor in key_down) is much larger - KEY_CNT - 768, and that can cause
out-of-bound access when we do
sym = U(key_maps[0][k]);
with large 'k'.
To fix it we should not attempt iterating beyond smaller of NR_KEYS and
KEY_CNT.
Also while at it let's switch to for_each_set_bit() instead of open-coding
it.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Daney [Tue, 17 May 2016 18:41:04 +0000 (11:41 -0700)]
tty: vt: Fix soft lockup in fbcon cursor blink timer.
commit
1b45996d2ebf9680ccd0db875fc668aa025f40fd upstream.
We are getting somewhat random soft lockups with this signature:
[ 86.992215] [<
fffffc00080935e0>] el1_irq+0xa0/0x10c
[ 86.997082] [<
fffffc000841822c>] cursor_timer_handler+0x30/0x54
[ 87.002991] [<
fffffc000810ec44>] call_timer_fn+0x54/0x1a8
[ 87.008378] [<
fffffc000810ef88>] run_timer_softirq+0x1c4/0x2bc
[ 87.014200] [<
fffffc000809077c>] __do_softirq+0x114/0x344
[ 87.019590] [<
fffffc00080af45c>] irq_exit+0x74/0x98
[ 87.024458] [<
fffffc00080fac20>] __handle_domain_irq+0x98/0xfc
[ 87.030278] [<
fffffc000809056c>] gic_handle_irq+0x94/0x190
This is caused by the vt visual_init() function calling into
fbcon_init() with a vc_cur_blink_ms value of zero. This is a
transient condition, as it is later set to a non-zero value. But, if
the timer happens to expire while the blink rate is zero, it goes into
an endless loop, and we get soft lockup.
The fix is to initialize vc_cur_blink_ms before calling the con_init()
function.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Scot Doyle <lkml14@scotdoyle.com>
Tested-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Mon, 20 Jun 2016 12:53:34 +0000 (13:53 +0100)]
iio:ad7266: Fix probe deferral for vref
commit
68b356eb3d9f5e38910fb62e22a78e2a18d544ae upstream.
Currently the ad7266 driver treats any failure to get vref as though the
regulator were not present but this means that if probe deferral is
triggered the driver will act as though the regulator were not present.
Instead only use the internal reference if we explicitly got -ENODEV which
is what is returned for absent regulators.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Mon, 20 Jun 2016 12:53:33 +0000 (13:53 +0100)]
iio:ad7266: Fix support for optional regulators
commit
e5511c816e5ac4909bdd38e85ac344e2b9b8e984 upstream.
The ad7266 driver attempts to support deciding between the use of internal
and external power supplies by checking to see if an error is returned when
requesting the regulator. This doesn't work with the current code since the
driver uses a normal regulator_get() which is for non-optional supplies
and so assumes that if a regulator is not provided by the platform then
this is a bug in the platform integration and so substitutes a dummy
regulator. Use regulator_get_optional() instead which indicates to the
framework that the regulator may be absent and provides a dummy regulator
instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Mon, 20 Jun 2016 12:53:32 +0000 (13:53 +0100)]
iio:ad7266: Fix broken regulator error handling
commit
6b7f4e25f3309f106a5c7ff42c8231494cf285d3 upstream.
All regulator_get() variants return either a pointer to a regulator or an
ERR_PTR() so testing for NULL makes no sense and may lead to bugs if we
use NULL as a valid regulator. Fix this by using IS_ERR() as expected.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Fri, 17 Jun 2016 13:22:24 +0000 (15:22 +0200)]
iio: accel: kxsd9: fix the usage of spi_w8r8()
commit
0c1f91b98552da49d9d8eed32b3132a58d2f4598 upstream.
These two spi_w8r8() calls return a value with is used by the code
following the error check. The dubious use was caused by a cleanup
patch.
Fixes:
d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis de Bethencourt [Wed, 22 Jun 2016 19:43:30 +0000 (20:43 +0100)]
staging: iio: accel: fix error check
commit
ef3149eb3ddb7f9125e11c90f8330e371b55cffd upstream.
sca3000_read_ctrl_reg() returns a negative number on failure, check for
this instead of zero.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Ranostay [Mon, 30 May 2016 02:52:02 +0000 (19:52 -0700)]
iio: hudmidity: hdc100x: fix incorrect shifting and scaling
commit
94bef000f1d4aa111f4ddda1482cf3b30ad069ce upstream.
Shifting sensor data to the right 2 bits was incorrect and caused the
scaling values + offsets to be invalid.
Reported-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Tested-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Ranostay [Fri, 27 May 2016 02:55:06 +0000 (19:55 -0700)]
iio: humidity: hdc100x: fix IIO_TEMP channel reporting
commit
09bc0ddaab6cab0fa95a67d5535ec772e2671193 upstream.
IIO_TEMP channel was being incorrectly reported back as Celsius when it
should have been milliCelsius. This is via an incorrect scale value being
returned to userspace.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Schofield [Fri, 20 May 2016 17:06:41 +0000 (10:06 -0700)]
iio: humidity: hdc100x: correct humidity integration time mask
commit
0e35cf5ce00d873d6e529d2b2cd7598d52438051 upstream.
Apply the correct mask to enable all available humidity integration
times. Currently, the driver defaults to 6500 and all is okay with that.
However, if 3850 is selected we get a stuck bit and can't change back
to 6500 or select 2500. (Verified with HDC1008)
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Ranostay [Sun, 22 May 2016 03:01:03 +0000 (20:01 -0700)]
iio: proximity: as3935: fix buffer stack trashing
commit
37b1ba2c68cfbe37f5f45bb91bcfaf2b016ae6a1 upstream.
Buffer wasn't of a valid size to allow the timestamp, and correct padding.
This patchset also moves the buffer off the stack, and onto the heap.
Cc: george.mccollister@gmail.com
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Ranostay [Sun, 22 May 2016 03:01:02 +0000 (20:01 -0700)]
iio: proximity: as3935: remove triggered buffer processing
commit
7d0643634ea567969bf3f3ed6193a9d6fc75653b upstream.
Triggered buffers shouldn't return processed data, and the respective
conversion was overflowing the defined .realbits for the channel.
Cc: george.mccollister@gmail.com
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Ranostay [Sun, 22 May 2016 03:01:01 +0000 (20:01 -0700)]
iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output
commit
5138806f16c74c7cb8ac3e408a859c79eb7c9567 upstream.
IIO_CHAN_INFO_RAW was returning processed data which was incorrect.
This also adds the IIO_CHAN_INFO_SCALE value to convert to a processed value.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yong Li [Thu, 5 May 2016 08:10:49 +0000 (16:10 +0800)]
iio: light apds9960: Add the missing dev.parent
commit
590b92a30242dd3f73de3d9a51d9924f1ab33e93 upstream.
Without this, the iio:deviceX is missing in the /sys/bus/i2c/devices/0-0039
Some userspace tools use this path to identify a specific instance of the
device.
Signed-off-by: Yong Li <sdliyong@gmail.com>
Reviewed-By: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregor Boirie [Tue, 19 Apr 2016 09:18:33 +0000 (11:18 +0200)]
iio:st_pressure: fix sampling gains (bring inline with ABI)
commit
d43a41152f8e9e4c0d19850884d1fada076dee10 upstream.
Temperature channels report scaled samples in Celsius although expected as
milli degree Celsius in Documentation/ABI/testing/sysfs-bus-iio.
Gains are not implemented at all for LPS001WP pressure and temperature
channels.
This patch ensures that proper offsets and scales are exposed to userpace
for both pressure and temperature channels.
Also fix a NULL pointer exception when userspace reads content of sysfs
scale attribute when gains are not defined.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Crestez Dan Leonard [Tue, 3 May 2016 12:27:09 +0000 (15:27 +0300)]
iio: Fix error handling in iio_trigger_attach_poll_func
commit
99543823357966ac938d9a310947e731b67338e6 upstream.
When attaching a pollfunc iio_trigger_attach_poll_func will allocate a
virtual irq and call the driver's set_trigger_state function. Fix error
handling to undo previous steps if any fails.
In particular this fixes handling errors from a driver's
set_trigger_state function. When using triggered buffers a failure to
enable the trigger used to make the buffer unusable.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ross Lagerwall [Tue, 10 May 2016 09:27:54 +0000 (10:27 +0100)]
xen/balloon: Fix declared-but-not-defined warning
commit
842775f1509054ea969f1787f38d6a0ec2ccfaba upstream.
Fix a declared-but-not-defined warning when building with
XEN_BALLOON_MEMORY_HOTPLUG=n. This fixes a regression introduced by
commit
dfd74a1edfab ("xen/balloon: Fix crash when ballooning on x86 32
bit PAE").
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Wed, 11 May 2016 13:51:51 +0000 (16:51 +0300)]
perf/x86: Fix undefined shift on 32-bit kernels
commit
6d6f2833bfbf296101f9f085e10488aef2601ba5 upstream.
Jim reported:
UBSAN: Undefined behaviour in arch/x86/events/intel/core.c:3708:12
shift exponent 35 is too large for 32-bit type 'long unsigned int'
The use of 'unsigned long' type obviously is not correct here, make it
'unsigned long long' instead.
Reported-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Imre Palik <imrep@amazon.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes:
2c33645d366d ("perf/x86: Honor the architectural performance monitoring version")
Link: http://lkml.kernel.org/r/1462974711-10037-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Christopher <kevinc@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ocquidant, Sebastien [Wed, 15 Jun 2016 11:47:35 +0000 (13:47 +0200)]
memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
commit
8f50b8e57442d28e41bb736c173d8a2490549a82 upstream.
In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY
is overwritten by the WEEXTRADELAY value from the device tree and
GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device
tree.
As a consequence, the memory accesses cannot be configured properly when
the extra delay are needed for OE and WE.
Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the
device tree file and prevents GPMC_CONFIG4_OEXTRADELAY
being overwritten by the WEXTRADELAY value from the device tree.
Signed-off-by: Ocquidant, Sebastien <sebastienocquidant@eaton.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sinclair Yeh [Thu, 7 Jul 2016 18:01:30 +0000 (11:01 -0700)]
drm/vmwgfx: Fix error paths when mapping framebuffer
commit
58541f7a6458e17ab417321b284f0090f530aa91 upstream.
Rather than returning immediately, make sure to unlock the
mutexes first.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sinclair Yeh [Wed, 29 Jun 2016 20:23:18 +0000 (13:23 -0700)]
drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set
commit
d5f1a291e32309324a8c481ed84b5c118d1360ea upstream.
For the Screen Object display unit, we need to reserve a
guest-invisible region equal to the size of the framebuffer for
the host. This region can only be reserved in VRAM, whereas
the guest-visible framebuffer can be reserved in either VRAM or
GMR.
As such priority should be given to the guest-invisible
region otherwise in a limited VRAM situation, we can fail to
allocate this region.
This patch makes it so that vmw_sou_backing_alloc() is called
before the framebuffer is pinned.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sinclair Yeh [Wed, 29 Jun 2016 20:20:26 +0000 (13:20 -0700)]
drm/vmwgfx: Check pin count before attempting to move a buffer
commit
4ed7e2242b637bc4af0416e4aa9f945db30fb44a upstream.
In certain scenarios, e.g. when fbdev is enabled, we can get into
a situation where a vmw_framebuffer_pin() is called on a buffer
that is already pinned.
When this happens, ttm_bo_validate() will unintentially remove the
TTM_PL_FLAG_NO_EVICT flag, thus unpinning it, and leaving no way
to actually pin the buffer again.
To prevent this, if a buffer is already pinned, then instead of
calling ttm_bo_validate(), just make sure the proposed placement is
compatible with the existing placement.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sinclair Yeh [Wed, 29 Jun 2016 18:29:47 +0000 (11:29 -0700)]
drm/vmwgfx: Work around mode set failure in 2D VMs
commit
7c20d213dd3cd6295bf9162730e7a368af957854 upstream.
In a low-memory 2D VM, fbdev can take up a large percentage of
available memory, making them unavailable for other DRM clients.
Since we do not take fbdev into account when filtering modes,
we end up claiming to support more modes than we actually do.
As a result, users get a black screen when setting a mode too
large for current available memory. In a low-memory VM
configuration, users can get a black screen for a mode as low
as 1024x768.
The current mode filtering mechanism keys off of
SVGA_REG_SUGGESTED_GBOBJECT_MEM_SIZE_KB, i.e. the maximum amount
of surface memory we have. Since this value is a performance
suggestion, not a hard limit, and since there should not be much
of a performance impact for a 2D VM, rather than filtering out
more modes, we will just allow ourselves to exceed the SVGA's
performance suggestion.
Also changed assumed bpp to 32 from 16 to make sure we can
actually support all the modes listed.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sinclair Yeh [Wed, 29 Jun 2016 19:15:48 +0000 (12:15 -0700)]
drm/vmwgfx: Add an option to change assumed FB bpp
commit
04319d89fbec72dfd60738003c3813b97c1d5f5a upstream.
Offer an option for advanced users who want larger modes at 16bpp.
This becomes necessary after the fix: "Work around mode set
failure in 2D VMs." Without this patch, there would be no way
for existing advanced users to get to a high res mode, and the
regression is they will likely get a black screen after a software
update on their current VM.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sinclair Yeh [Wed, 29 Jun 2016 19:58:49 +0000 (12:58 -0700)]
drm/ttm: Make ttm_bo_mem_compat available
commit
94477bff390aa4612d2332c8abafaae0a13d6923 upstream.
There are cases where it is desired to see if a proposed placement
is compatible with a buffer object before calling ttm_bo_validate().
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Fri, 27 May 2016 14:09:25 +0000 (16:09 +0200)]
drm: atmel-hlcdc: actually disable scaling when no scaling is required
commit
1b7e38b92b0bbd363369f5160f13f4d26140972d upstream.
The driver is only enabling scaling, but never disabling it, thus, if you
enable the scaling feature once it stays enabled forever.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes:
1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomi Valkeinen [Tue, 31 May 2016 12:03:17 +0000 (15:03 +0300)]
drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
commit
6709887c448d1cff51b52d09763c7b834ea5f0be upstream.
drm_atomic_set_mode_prop_for_crtc() does not clear the state->mode, so
old data may be left there when a new mode is set, possibly causing odd
issues.
This patch improves the situation by always clearing the state->mode
first.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomi Valkeinen [Tue, 31 May 2016 12:03:15 +0000 (15:03 +0300)]
drm: add missing drm_mode_set_crtcinfo call
commit
b201e743f42d143f4bcdcb14587caf7cb1d99229 upstream.
When setting mode via MODE_ID property,
drm_atomic_set_mode_prop_for_crtc() does not call
drm_mode_set_crtcinfo() which possibly causes:
"[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 32: Can't
calculate constants, dotclock = 0!"
Whether the error is seen depends on the previous data in state->mode,
as state->mode is not cleared when setting new mode.
This patch adds drm_mode_set_crtcinfo() call to
drm_mode_convert_umode(), which is called in both legacy and atomic
paths. This should be fine as there's no reason to call
drm_mode_convert_umode() without also setting the crtc related fields.
drm_mode_set_crtcinfo() is removed from the legacy drm_mode_setcrtc() as
that is no longer needed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Tue, 26 Apr 2016 16:46:32 +0000 (19:46 +0300)]
drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency
commit
a04e23d42a1ce5d5f421692bb1c7e9352832819d upstream.
Update CDCLK_FREQ on BDW after changing the cdclk frequency. Not sure
if this is a late addition to the spec, or if I simply overlooked this
step when writing the original code.
This is what Bspec has to say about CDCLK_FREQ:
"Program this field to the CD clock frequency minus one. This is used to
generate a divided down clock for miscellaneous timers in display."
And the "Broadwell Sequences for Changing CD Clock Frequency" section
clarifies this further:
"For CD clock 337.5 MHz, program 337 decimal.
For CD clock 450 MHz, program 449 decimal.
For CD clock 540 MHz, program 539 decimal.
For CD clock 675 MHz, program 674 decimal."
Cc: stable@vger.kernel.org
Cc: Mika Kahola <mika.kahola@intel.com>
Fixes:
b432e5cfd5e9 ("drm/i915: BDW clock change support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461689194-6079-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit
7f1052a8fa38df635ab0dc0e6025b64ab9834824)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Mon, 11 Jul 2016 13:46:17 +0000 (14:46 +0100)]
drm/i915: Update ifdeffery for mutex->owner
commit
b19240062722c39fa92c99f04cbfd93034625123 upstream.
In commit
7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER when
appropriate") the owner field in the mutex was updated from being
dependent upon CONFIG_SMP to using optimistic spin. Update our peek
function to suite.
Fixes:
7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER...")
Reported-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1468244777-4888-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit
4f074a5393431a7d2cc0de7fcfe2f61d24854628)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Fri, 13 May 2016 17:53:56 +0000 (20:53 +0300)]
drm/i915: Refresh cached DP port register value on resume
commit
664a84d2c77cbff2945ed7f96d08afbba42b6293 upstream.
During hibernation the cached DP port register value will be left with
whatever value we have there when we create the hibernation image.
Currently that means the port (and eDP PLL) will be off in the cached
value. However when we resume there is no guarantee that the value
in the actual register will match the cached value. If i915 isn't
loaded in the kernel that loads the hibernation image, the port may
well be on (eg. left on by the BIOS). The encoder state readout
does the right thing in this case and updates our encoder state
to reflect the actual hardware state. However the post-resume modeset
will then use the stale cached port register value in
intel_dp_link_down() and potentially confuse the hardware.
This was caught by the following assert
WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915]
eDP PLL state assertion failure (expected on, current off)
on account of the eDP PLL getting prematurely turned off when
shutting down the port, since the DP_PLL_ENABLE bit wasn't set
in the cached register value.
Presumably I introduced this problem in
commit
6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup")
as before that we didn't update the cached value after shuttting the
port down. That's assuming the port got enabled at least once prior
to hibernating. If that didn't happen then the cached value would
still have been totally out of sync with reality (eg. first boot w/o
eDP on, then hibernate, and then resume with eDP on).
So, let's fix this properly and refresh the cached register value from
the hardware register during resume.
DDI platforms shouldn't use the cached value during port disable at
least, so shouldn't have this particular issue. They might still have
issues if we skip the initial modeset and then try to retrain the link
or something. But untangling this DP vs. DDI mess is a bigger topic,
so let's jut punt on DDI for now.
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes:
6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463162036-27931-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit
64989ca4b27acb026b6496ec21e43bee66f86a5b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude [Tue, 14 Jun 2016 15:04:09 +0000 (11:04 -0400)]
drm/i915/ilk: Don't disable SSC source if it's in use
commit
476490a945e1f0f6bd58e303058d2d8ca93a974c upstream.
Thanks to Ville Syrjälä for pointing me towards the cause of this issue.
Unfortunately one of the sideaffects of having the refclk for a DPLL set
to SSC is that as long as it's set to SSC, the GPU will prevent us from
powering down any of the pipes or transcoders using it. A couple of
BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL
configurations. This causes issues on the first modeset, since we don't
expect SSC to be left on and as a result, can't successfully power down
the pipes or the transcoders using it. Here's an example from this Dell
OptiPlex 990:
[drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
[drm:intel_modeset_init] 2 display pipes available.
[drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_reset] crt adpa set to 0xf40000
[drm:intel_dp_init_connector] Adding DP connector on port C
[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[drm:ironlake_init_pch_refclk] Disabling SSC entirely
… later we try committing the first modeset …
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config
ffff88041b02e800 for pipe A
[drm:intel_dump_pipe_config] cpu_transcoder: A
…
[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
[drm:intel_dump_pipe_config] planes on this crtc
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
[drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258
[drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
[drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
[drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
[drm:intel_disable_pipe] disabling pipe A
------------[ cut here ]------------
WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
pipe_off wait timed out
…
---[ end trace
94fc8aa03ae139e8 ]---
[drm:intel_dp_link_down]
[drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A
Later modesets succeed since they reset the DPLL's configuration anyway,
but this is enough to get stuck with a big fat warning in dmesg.
A better solution would be to add refcounts for the SSC source, but for
now leaving the source clock on should suffice.
Changes since v4:
- Fix calculation of final for systems with LVDS panels (fixes BUG() on
CI test suite)
Changes since v3:
- Move temp variable into loop
- Move checks for using_ssc_source to after we've figured out has_ck505
- Add using_ssc_source to debug output
Changes since v2:
- Fix debug output for when we disable the CPU source
Changes since v1:
- Leave the SSC source clock on instead of just shutting it off on all
of the DPLL configurations.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>