OSDN Git Service
Steve Longerbeam [Fri, 1 May 2020 17:15:36 +0000 (19:15 +0200)]
media: v4l2-subdev: add v4l2_subdev_get_fwnode_pad_1_to_1
Add a convenience function that can be used as the .get_fwnode_pad
operation for subdevices that map port numbers and pad indexes 1:1.
The function verifies the endpoint is owned by the subdevice, and if
so returns the endpoint port number.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Steve Longerbeam [Fri, 1 May 2020 17:15:35 +0000 (19:15 +0200)]
media: entity: Pass entity to get_fwnode_pad operation
Add a missing pointer to the entity in the media_entity operation
get_fwnode_pad. There are no implementers of this op yet, but a future
entity that does so will almost certainly need a reference to itself
to carry out the work.
operation")
Fixes:
ae45cd5efc120 ("[media] media: entity: Add get_fwnode_pad entity
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Tue, 31 Mar 2020 18:06:30 +0000 (20:06 +0200)]
media: i2c: imx219: Fix a bug in imx219_enum_frame_size
When enumerating the frame sizes, the value sent to
imx219_get_format_code should be fse->code
(the code from the ioctl) and not imx219->fmt.code
which is the code set currently in the driver.
Fixes:
22da1d56e982 ("media: i2c: imx219: Add support for RAW8 bit bayer format")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Wed, 29 Apr 2020 09:50:38 +0000 (11:50 +0200)]
media: i2c: imx219: Implement get_selection
Implement the get_selection pad operation for the IMX219 sensor driver.
The supported targets report the sensor's native size, the crop default
rectangle and the crop rectangle.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Geert Uytterhoeven [Thu, 7 May 2020 12:27:57 +0000 (14:27 +0200)]
media: media: sh_veu: Remove driver
Since its inclusion in v3.9, no users of the SuperH VEU mem2mem video
processing driver have appeared upstream. All VEU devices in SuperH
board code still bind to the "uio_pdrv_genirq" driver instead.
The original author marked the driver orphaned in v3.15.
Remove the driver; it can always be resurrected from git history when
needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Landley <rob@landley.net>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Thu, 7 May 2020 22:00:40 +0000 (00:00 +0200)]
media: dvb-frontends: remove redundant initialization of variable status
The variable status is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Thu, 7 May 2020 21:43:31 +0000 (23:43 +0200)]
media: mantis_dvb: remove redundant initialization to variable result
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jia-Ju Bai [Thu, 7 May 2020 10:25:21 +0000 (12:25 +0200)]
media: usb: ttusb-dec: reduce the number of memory reads in ttusb_dec_handle_irq()
In ttusb_dec_handle_irq(), buffer[4] is continuously read from memory
three times, without being modified.
To reduce the number of memory reads, buffer[4] is first assigned to a
local variable index, and then index is used to replace buffer[4].
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Sat, 25 Apr 2020 11:22:05 +0000 (13:22 +0200)]
media: stv0900_core: remove redundant assignment to variable val
The variable val is being initializeed with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Fri, 24 Apr 2020 11:16:00 +0000 (13:16 +0200)]
media: dvb: remove redundant assignment to variable bw
The variable bw is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 6 May 2020 09:54:39 +0000 (11:54 +0200)]
media: gpio-ir-tx: allow transmission without carrier
Some IR protocols do not use a carrier.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sat, 2 May 2020 12:50:52 +0000 (14:50 +0200)]
media: gpio-ir-tx: improve precision of transmitted signal due to scheduling
usleep_range() may take longer than the max argument due to scheduling,
especially under load. This is causing random errors in the transmitted
IR. Remove the usleep_range() in favour of busy-looping with udelay().
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 7 May 2020 15:12:53 +0000 (17:12 +0200)]
media: v4l: document VIDIOC_SUBDEV_QUERYCAP
Add documentation for the new VIDIOC_SUBDEV_QUERYCAP ioctl.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 7 May 2020 15:12:52 +0000 (17:12 +0200)]
media: v4l2-subdev: add VIDIOC_SUBDEV_QUERYCAP ioctl
While normal video/radio/vbi/swradio nodes have a proper QUERYCAP ioctl
that apps can call to determine that it is indeed a V4L2 device, there
is currently no equivalent for v4l-subdev nodes. Adding this ioctl will
solve that, and it will allow utilities like v4l2-compliance to be used
with these devices as well.
SUBDEV_QUERYCAP currently returns the version and capabilities of the
subdevice. Define a capability flag to report if the subdevice is
registered in read-only mode.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 7 May 2020 15:12:51 +0000 (17:12 +0200)]
media: v4l2-subdev: Guard whole fops and ioctl hdlr
A sub-device device node can be registered in user space only if the
CONFIG_VIDEO_V4L2_SUBDEV_API Kconfig option is selected. Currently the
open/close file operations and the ioctl handler have some parts of
their implementations guarded by #if
defined(CONFIG_VIDEO_V4L2_SUBDEV_API), while they are actually not
accessible without a video device node registered to user space.
Guard the whole open, close and ioctl handler and provide stubs if the
VIDEO_V4L2_SUBDEV_API Kconfig option is not selected.
This slightly reduces the kernel size when the option is not selected
and simplifies the file ops and ioctl implementations.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 7 May 2020 15:12:50 +0000 (17:12 +0200)]
media: v4l2-dev: Add v4l2_device_register_ro_subdev_node()
Add to the V4L2 core a function to register device nodes for video
subdevices in read-only mode.
Registering a device node in read-only mode is useful to expose to
userspace the current sub-device configuration, without allowing
application to change it by using the V4L2 subdevice ioctls.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 7 May 2020 15:12:49 +0000 (17:12 +0200)]
media: Documentation: media: Document read-only subdevice
Document a new kAPI function to register subdev device nodes in read only
mode and for each affected ioctl report how access is restricted.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jacopo Mondi [Thu, 7 May 2020 15:12:48 +0000 (17:12 +0200)]
media: Documentation: media: Update sub-device API intro
Update the V4L2 sub-device userspace API introduction to provide more
details on why complex devices might want to register devnodes for the
connected subdevices.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 6 May 2020 11:20:51 +0000 (13:20 +0200)]
media: ipu3.rst: fix a build warning
Sphinx 2.4.4 produces this warning:
Documentation/admin-guide/media/ipu3.rst:235: WARNING: Title underline too short.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 6 May 2020 12:16:00 +0000 (14:16 +0200)]
media: vidioc-enum-fmt.rst: make the ENUM_FMT text clearer
Rework the documentation to make it easier for the reader to understand
the differences in behavior of this ioctl between MC and non-MC drivers.
Note the addition of the 'video-node-centric' and 'MC-centric' terms to
help understand what the IO_MC capability really means.
Also mention in the beginning that mbus_code is one of the fields that
application should initialize, and add META_OUTPUT as one of the types that
this ioctl supports (that was never added here when the META_OUTPUT buffer
type was added).
Finally document that EINVAL will be returned if mbus_code is unsupported.
Fixes:
e5b6b07a1b45 ("media: v4l2: Extend VIDIOC_ENUM_FMT to support MC-centric devices")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Tue, 21 Apr 2020 13:57:43 +0000 (15:57 +0200)]
media: vimc: Make use of V4L2_CAP_IO_MC
Set the V4L2_CAP_IO_MC capability flag to report this vimc
inputs/outputs are controlled by the media graph.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Tue, 21 Apr 2020 13:57:42 +0000 (15:57 +0200)]
media: staging/intel-ipu3: Make use of V4L2_CAP_IO_MC
Set the V4L2_CAP_IO_MC capability flag and remove the driver specific
vidioc_enum_{input,output}, vidioc_g_{input,output} and
vidioc_s_{input,output} callbacks.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Tue, 21 Apr 2020 13:57:41 +0000 (15:57 +0200)]
media: rcar-vin: Make use of V4L2_CAP_IO_MC
Set the V4L2_CAP_IO_MC capability flag and remove the driver specific
vidioc_enum_input, vidioc_g_input and vidioc_s_input callbacks for the
media controller enabled part of the driver. Also add support mbus_code
filtering for format enumeration.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Fri, 24 Apr 2020 13:43:31 +0000 (15:43 +0200)]
media: v4l2: Extend VIDIOC_ENUM_FMT to support MC-centric devices
The VIDIOC_ENUM_FMT ioctl enumerates all formats supported by a video
node. For MC-centric devices, its behaviour has always been ill-defined,
with drivers implementing one of the following behaviours:
- No support for VIDIOC_ENUM_FMT at all
- Enumerating all formats supported by the video node, regardless of the
configuration of the pipeline
- Enumerating formats supported by the video node for the active
configuration of the connected subdevice
The first behaviour is obviously useless for applications. The second
behaviour provides the most information, but doesn't offer a way to find
what formats are compatible with a given pipeline configuration. The
third behaviour fixes that, but with the drawback that applications
can't enumerate all supported formats anymore, and have to modify the
active configuration of the pipeline to enumerate formats.
The situation is messy as none of the implemented behaviours are ideal,
and userspace can't predict what will happen as the behaviour is
driver-specific.
To fix this, let's extend the VIDIOC_ENUM_FMT with a missing capability:
enumerating pixel formats for a given media bus code. The media bus code
is passed through the v4l2_fmtdesc structure in a new mbus_code field
(repurposed from the reserved fields). With this capability in place,
applications can enumerate pixel formats for a given media bus code
without modifying the active configuration of the device.
The current behaviour of the ioctl is preserved when the new mbus_code
field is set to 0, ensuring compatibility with existing userspace. The
API extension is documented as mandatory for MC-centric devices (as
advertised through the V4L2_CAP_IO_MC capability), allowing applications
and compliance tools to easily determine the availability of the
VIDIOC_ENUM_FMT extension.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Tue, 21 Apr 2020 13:57:39 +0000 (15:57 +0200)]
media: pci: Fill v4l2_fmtdesc with designated initializers
Replace initialization of static const v4l2_fmtdesc instances that
specify every struct member with designated initializers. This allows
not zeroing the reserved fields explicitly, and will avoid a need to
patch these drivers every time a reserved field is repurposed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Tue, 21 Apr 2020 13:57:38 +0000 (15:57 +0200)]
media: v4l2-dev/ioctl: Add V4L2_CAP_IO_MC
Add a video device capability flag to indicate that its inputs and/or
outputs are controlled by the Media Controller instead of the V4L2 API.
When this flag is set, ioctl for enum inputs and outputs are
automatically enabled and programmed to call a helper function.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 22 Apr 2020 08:44:21 +0000 (10:44 +0200)]
media: admin-guide: split cardlist.rst file
After adding all cardlists, this file became too big. Split
it on smaller files, in order to make easier to maintain.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 22 Apr 2020 07:25:00 +0000 (09:25 +0200)]
media: admin-guide: make clear about PCI subsystem IDs
On several parts of the document, it mentions "PCI ID", when
it is actually referring to the subsystem's part of the PCI
ID.
Change the language to let it be clear.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Tue, 5 May 2020 08:25:56 +0000 (10:25 +0200)]
media: cec: silence shift wrapping warning in __cec_s_log_addrs()
The log_addrs->log_addr_type[i] value is a u8 which is controlled by
the user and comes from the ioctl. If it's over 31 then that results in
undefined behavior (shift wrapping) and that leads to a Smatch static
checker warning. We already cap the value later so we can silence the
warning just by re-ordering the existing checks.
I think the UBSan checker will also catch this bug at runtime and
generate a warning. But otherwise the bug is harmless.
Fixes:
9881fe0ca187 ("[media] cec: add HDMI CEC framework (adapter)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Christophe JAILLET [Tue, 5 May 2020 07:50:34 +0000 (09:50 +0200)]
media: sun8i: Fix an error handling path in 'deinterlace_runtime_resume()'
It is spurious to call 'clk_disable_unprepare()' when
'clk_prepare_enable()' has not been called yet.
Re-order the error handling path to avoid it.
Fixes:
a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: err_exlusive_rate -> err_exclusive_rate]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Nícolas F. R. A. Prado [Fri, 1 May 2020 13:11:23 +0000 (15:11 +0200)]
media: vimc: deb: Add support for {RGB,BGR,GBR}888 bus formats on source pad
Add support for RGB888_*, BGR888_* and GBR888_* media bus formats on
the source pad of debayer subdevices.
Acked-by: Helen Koike <helen.koike@collabora.com>
Co-developed-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Nícolas F. R. A. Prado [Fri, 1 May 2020 13:11:12 +0000 (15:11 +0200)]
media: vimc: Add missing {RGB,BGR,GBR}888 media bus codes
Add missing RGB888_*, BGR888_* and GBR888_* media bus codes in the
vimc_pix_map_list. Since there is no GBR24 pixelformat, use the RGB24
pixelformat for MEDIA_BUS_FMT_GBR888_1X24.
Acked-by: Helen Koike <helen.koike@collabora.com>
Co-developed-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Nícolas F. R. A. Prado [Fri, 1 May 2020 13:11:02 +0000 (15:11 +0200)]
media: vimc: Support multiple media bus codes for each pixelformat
Change vimc_pix_map_list to allow multiple media bus codes to map to the
same pixelformat, making it possible to add media bus codes for which
there are no pixelformat.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix sparse warning: const u32 -> u32]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Tue, 28 Apr 2020 21:34:19 +0000 (23:34 +0200)]
media: ti-vpe: avoid gcc-9 warning
gcc warns about empty array declarations, which we get in this driver
when compile-testing without CONFIG_OF:
drivers/media/platform/ti-vpe/cal.c:2194:34: warning: array 'cal_of_match' assumed to have one element
2194 | static const struct of_device_id cal_of_match[];
Since all users of this driver do need CONFIG_OF anyway, there is no
point in making the array definition conditional to save space, so
just remove the #ifdef and move the array up a little.
Fixes:
343e89a792a5 ("[media] media: ti-vpe: Add CAL v4l2 camera capture driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
John Oldman [Tue, 28 Apr 2020 17:26:55 +0000 (19:26 +0200)]
media: staging: media: usbvision: usbvision-core Correct spelling
Correct spelling in comment
Signed-off-by: John Oldman <john.oldman@polehill.co.uk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Greg Kroah-Hartman [Tue, 28 Apr 2020 17:04:05 +0000 (19:04 +0200)]
media: staging: media: imx: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Steve Longerbeam <slongerbeam@gmail.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Neil Armstrong [Tue, 28 Apr 2020 12:50:36 +0000 (14:50 +0200)]
media: MAINTAINERS: update the Amlogic VDEC driver maintainer entry
Add myself as co-maintainer of the Amlogic VDEC driver, and add the
missing vdec DT yaml bindings.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Maxime Jourdan [Tue, 28 Apr 2020 12:50:34 +0000 (14:50 +0200)]
media: meson: vdec: enable mcrcc for VP9
The motion compensation reference cache controller allows caching
parts of reference frames for faster decoding.
Fixes:
00c43088aa68 ("media: meson: vdec: add VP9 decoder support")
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Zou Wei [Tue, 28 Apr 2020 12:08:09 +0000 (14:08 +0200)]
media: cx231xx: Remove unneeded semicolon
Fixes coccicheck warnings:
drivers/media/usb/cx231xx/cx231xx-avcore.c:610:3-4: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Koji Matsuoka [Fri, 24 Apr 2020 10:39:45 +0000 (12:39 +0200)]
media: rcar-csi2: Fix comment of VCDT/VCDT2 register
According to latest H/W manual v1.50, the description of channel
number in the VCDT/VCDT2 register is decremented by one.
Therefore, this patch fixes it about comment.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Steve Longerbeam [Tue, 21 Apr 2020 16:29:40 +0000 (18:29 +0200)]
media: imx: utils: Default colorspace to SRGB
The function imx_media_init_mbus_fmt() initializes the imx subdevice
mbus colorimetry to some sane defaults when the subdevice is registered.
Currently it guesses at a colorspace based on the passed mbus pixel
format. If the format is RGB, it chooses colorspace V4L2_COLORSPACE_SRGB,
and if the format is YUV, it chooses V4L2_COLORSPACE_SMPTE170M.
While that might be a good guess, it's not necessarily true that a RGB
pixel format encoding uses a SRGB colorspace, or that a YUV encoding
uses a SMPTE170M colorspace. Instead of making this dubious guess,
just default the colorspace to SRGB.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Johan Jonker [Tue, 21 Apr 2020 15:51:31 +0000 (17:51 +0200)]
media: dt-bindings: media: rockchip-vpu: fix interrupt-names
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@
ff350000:
interrupts: [[0, 9, 4]] is too short
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@
ff350000:
interrupt-names: ['vdpu'] is too short
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@
ff350000:
interrupt-names:0: 'vepu' was expected
With the conversion of rockchip-vpu.txt to yaml the correct
'interrupt-names' for rk3328 was not included, so add them now.
Also add 'minItems' to 'interrupts'for the completeness.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-vpu.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Sun, 12 Apr 2020 12:05:04 +0000 (14:05 +0200)]
media: staging: rkisp1: cap: enable RGB capture format with YUV media bus
In selfpath, RGB capture formats are received in the sink pad as YUV
and are converted to RGB only when writing to memory. So the validation
function should accept YUV bus formats with RGB capture encoding.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Sun, 12 Apr 2020 12:05:03 +0000 (14:05 +0200)]
media: staging: rkisp1: rsz: change (hv)div only if capture format is YUV
RGB formats in selfpath should receive input format as YUV422.
The resizer input format is always YUV422 and therefore
if the capture format is RGB, the resizer should not change
the YUV rations.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Sun, 12 Apr 2020 12:05:02 +0000 (14:05 +0200)]
media: staging: rkisp1: rsz: remove redundant if statement and add inline doc
The statement "if (rsz->fmt_type == V4L2_PIXEL_ENC_YUV)"
can be removed since the value of rsz->fmt_type is either
V4L2_PIXEL_ENC_YUV or V4L2_PIXEL_ENC_BAYER and the function
returns if it is bayer. In addition some doc with clarification
is added.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Sun, 12 Apr 2020 12:05:01 +0000 (14:05 +0200)]
media: staging: rkisp1: rsz: get the capture format info from the capture struct
Currently the format info of the capture is retrieved by calling
the function v4l2_format_info. This is not needed since it is
already saved in the capture object.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Thu, 16 Apr 2020 07:45:07 +0000 (09:45 +0200)]
media: staging: ipu3-imgu: Add a sanity check for the parameter struct size
There have been cases where seemingly innocuous patches have broken the
uAPI by changing the memory layout of the parameter struct. Generally such
changes also introduce a change in the size of the entire struct. This
patch adds a sanity check to avoid such cases happening in the future.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Tested-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 15 Apr 2020 15:40:09 +0000 (17:40 +0200)]
media: staging: ipu3-imgu: Move alignment attribute to field
Move the alignment attribute of struct ipu3_uapi_awb_fr_config_s to the
field in struct ipu3_uapi_4a_config, the other location where the struct
is used.
Fixes: commit
c9d52c114a9f ("media: staging: imgu: Address a compiler warning on alignment")
Reported-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Bingbu Cao <bingbu.cao@intel.com>
Cc: stable@vger.kernel.org # for v5.3 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 15 Apr 2020 15:34:05 +0000 (17:34 +0200)]
media: Revert "staging: imgu: Address a compiler warning on alignment"
This reverts commit
c9d52c114a9fcc61c30512c7f810247a9f2812af.
The patch being reverted changed the memory layout of struct
ipu3_uapi_acc_param. Revert it, and address the compiler warning issues in
further patches.
Fixes: commit
c9d52c114a9f ("media: staging: imgu: Address a compiler warning on alignment")
Reported-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Bingbu Cao <bingbu.cao@intel.com>
Cc: stable@vger.kernel.org # for v5.3 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 22 Apr 2020 18:13:26 +0000 (20:13 +0200)]
media: MAINTAINERS: ipu3-imgu: Add Tian Shu and Bingbu as reviewers
Add Bingbu Cao and Tian Shu Qiu as reviewers for the IPU3 ImgU driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Bingbu Cao <bingbu.cao@intel.com>
Cc: Tian Shu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Fri, 17 Apr 2020 09:34:33 +0000 (11:34 +0200)]
media: ipu3.rst: add explanation for running mode
Add some explanation of the ImgU running mode and add more information
about firmware selection and running mode usage.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomasz Figa [Sat, 11 Apr 2020 17:37:10 +0000 (19:37 +0200)]
media: staging: ipu3: Fix stale list entries on parameter queue failure
When queuing parameters fails, current code bails out without deleting
the corresponding vb2 buffer from the driver buffer list, but the buffer
is returned to vb2. This leads to stale list entries and a crash when
the driver stops streaming:
[ 224.935561] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 224.998932] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.064430] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.128534] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.194945] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.360363] ------------[ cut here ]------------
[ 225.360372] WARNING: CPU: 0 PID: 6704 at
drivers/media/common/videobuf2/videobuf2-core.c:927
vb2_buffer_done+0x20f/0x21a [videobuf2_common]
[ 225.360374] Modules linked in: snd_seq_dummy snd_seq snd_seq_device
veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp
nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput
ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common
videobuf2_dma_sg videobuf2_memops ov13858 ov5670 v4l2_fwnode dw9714
acpi_als xt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring
cros_ec_light_prox cros_ec_sensors cros_ec_sensors_core
industrialio_triggered_buffer kfifo_buf industrialio
cros_ec_sensorsupport cdc_ether btusb btrtl btintel btbcm usbnet
bluetooth ecdh_generic ecc hid_google_hammer iwlmvm iwl7000_mac80211
r8152 mii lzo_rle lzo_compress iwlwifi zram cfg80211 joydev
[ 225.360400] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G
C 5.4.30 #5
[ 225.360402] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[ 225.360405] RIP: 0010:vb2_buffer_done+0x20f/0x21a [videobuf2_common]
[ 225.360408] Code: 5e 41 5f 5d e9 e0 16 5a d4 41 8b 55 08 48 c7 c7 8f
8b 5c c0 48 c7 c6 36 9a 5c c0 44 89 f9 31 c0 e8 a5 1c 5b d4 e9 53 fe ff
ff <0f> 0b eb a3 e8 12 d7 43 d4 eb 97 0f 1f 44 00 00 55 48 89 e5 41 56
[ 225.360410] RSP: 0018:
ffff9468ab32fba8 EFLAGS:
00010297
[ 225.360412] RAX:
ffff8aa7a51577a8 RBX:
dead000000000122 RCX:
ffff8aa7a51577a8
[ 225.360414] RDX:
0000000000000000 RSI:
0000000000000006 RDI:
ffff8aa7a5157400
[ 225.360416] RBP:
ffff9468ab32fbd8 R08:
ffff8aa64e47e600 R09:
0000000000000000
[ 225.360418] R10:
0000000000000000 R11:
ffffffffc06036e6 R12:
dead000000000100
[ 225.360420] R13:
ffff8aa7820f1940 R14:
ffff8aa7a51577a8 R15:
0000000000000006
[ 225.360422] FS:
00007c1146ffd700(0000) GS:
ffff8aa7baa00000(0000)
knlGS:
0000000000000000
[ 225.360424] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 225.360426] CR2:
00007aea3473a000 CR3:
00000000537d6004 CR4:
00000000003606f0
[ 225.360427] Call Trace:
[ 225.360434] imgu_return_all_buffers+0x6f/0x8e [ipu3_imgu]
[ 225.360438] imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu]
[ 225.360441] __vb2_queue_cancel+0x33/0x22d [videobuf2_common]
[ 225.360443] vb2_core_streamoff+0x16/0x78 [videobuf2_common]
[ 225.360448] __video_do_ioctl+0x33d/0x42a
[ 225.360452] video_usercopy+0x34a/0x615
[ 225.360455] ? video_ioctl2+0x16/0x16
[ 225.360458] v4l2_ioctl+0x46/0x53
[ 225.360462] do_vfs_ioctl+0x50a/0x787
[ 225.360465] ksys_ioctl+0x58/0x83
[ 225.360468] __x64_sys_ioctl+0x1a/0x1e
[ 225.360470] do_syscall_64+0x54/0x68
[ 225.360474] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 225.360476] RIP: 0033:0x7c118030f497
[ 225.360479] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48
[ 225.360480] RSP: 002b:
00007c1146ffa5a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 225.360483] RAX:
ffffffffffffffda RBX:
00007c1140010018 RCX:
00007c118030f497
[ 225.360484] RDX:
00007c114001019c RSI:
0000000040045613 RDI:
000000000000004c
[ 225.360486] RBP:
00007c1146ffa700 R08:
00007c1140010048 R09:
0000000000000000
[ 225.360488] R10:
0000000000000000 R11:
0000000000000246 R12:
00007c11400101b0
[ 225.360489] R13:
00007c1140010200 R14:
00007c1140010048 R15:
0000000000000001
[ 225.360492] ---[ end trace
73625ecfbd1c930e ]---
[ 225.360498] general protection fault: 0000 [#1] PREEMPT SMP PTI
[ 225.360501] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G
WC 5.4.30 #5
[ 225.360502] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[ 225.360505] RIP: 0010:imgu_return_all_buffers+0x52/0x8e [ipu3_imgu]
[ 225.360507] Code: d4 49 8b 85 70 0a 00 00 49 81 c5 70 0a 00 00 49 39
c5 74 3b 49 bc 00 01 00 00 00 00 ad de 49 8d 5c 24 22 4c 8b 30 48 8b 48
08 <49> 89 4e 08 4c 89 31 4c 89 20 48 89 58 08 48 8d b8 58 fc ff ff 44
[ 225.360509] RSP: 0018:
ffff9468ab32fbe8 EFLAGS:
00010293
[ 225.360511] RAX:
ffff8aa7a51577a8 RBX:
dead000000000122 RCX:
dead000000000122
[ 225.360512] RDX:
0000000000000000 RSI:
0000000000000006 RDI:
ffff8aa7a5157400
[ 225.360514] RBP:
ffff9468ab32fc18 R08:
ffff8aa64e47e600 R09:
0000000000000000
[ 225.360515] R10:
0000000000000000 R11:
ffffffffc06036e6 R12:
dead000000000100
[ 225.360517] R13:
ffff8aa7820f1940 R14:
dead000000000100 R15:
0000000000000006
[ 225.360519] FS:
00007c1146ffd700(0000) GS:
ffff8aa7baa00000(0000)
knlGS:
0000000000000000
[ 225.360521] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 225.360523] CR2:
00007aea3473a000 CR3:
00000000537d6004 CR4:
00000000003606f0
[ 225.360525] Call Trace:
[ 225.360528] imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu]
[ 225.360531] __vb2_queue_cancel+0x33/0x22d [videobuf2_common]
[ 225.360534] vb2_core_streamoff+0x16/0x78 [videobuf2_common]
[ 225.360537] __video_do_ioctl+0x33d/0x42a
[ 225.360540] video_usercopy+0x34a/0x615
[ 225.360542] ? video_ioctl2+0x16/0x16
[ 225.360546] v4l2_ioctl+0x46/0x53
[ 225.360548] do_vfs_ioctl+0x50a/0x787
[ 225.360551] ksys_ioctl+0x58/0x83
[ 225.360554] __x64_sys_ioctl+0x1a/0x1e
[ 225.360556] do_syscall_64+0x54/0x68
[ 225.360559] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 225.360561] RIP: 0033:0x7c118030f497
[ 225.360563] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48
[ 225.360565] RSP: 002b:
00007c1146ffa5a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 225.360567] RAX:
ffffffffffffffda RBX:
00007c1140010018 RCX:
00007c118030f497
[ 225.360569] RDX:
00007c114001019c RSI:
0000000040045613 RDI:
000000000000004c
[ 225.360570] RBP:
00007c1146ffa700 R08:
00007c1140010048 R09:
0000000000000000
[ 225.360572] R10:
0000000000000000 R11:
0000000000000246 R12:
00007c11400101b0
[ 225.360574] R13:
00007c1140010200 R14:
00007c1140010048 R15:
0000000000000001
[ 225.360576] Modules linked in: snd_seq_dummy snd_seq snd_seq_device
veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp
nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput
ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common
videobuf2_dma_sg videobuf2_memops ov13858 ov567
Fix this by moving the list_del() call just below the list_first_entry()
call when the buffer no longer needs to be in the list.
Fixes:
8ecc7c9da013 ("media: staging/intel-ipu3: parameter buffer refactoring")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Sat, 18 Apr 2020 09:06:22 +0000 (11:06 +0200)]
media: venus: venc,vdec: Return EBUSY on S_FMT while streaming
According to the v4l spec s_fmt must return EBUSY while the
particular queue is streaming. Add such check in encoder and
decoder s_fmt methods.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Fri, 3 Apr 2020 15:56:29 +0000 (17:56 +0200)]
media: venus: Mark last capture buffer
According to stateful Codec API the decoder will process all
remaining buffers from before the source change event in
dynamic-resolution-change state and mark the last buffer with
V4L2_BUF_FLAG_LAST.
In Venus case the firmware doesn't mark that last buffer and
some mechanism have to be created in v4l decoder driver.
Fortunately the firmware interface (HFI) claims that the
decoder output buffers will be returned to v4l decoder
driver before it send the insufficient event.
In order to do that we save last queued in the driver capture
buffer in the event_notify and issue flush on output firmware
buffers queue. Once the saved buffer is returned (as a result of
flush command) we mark it as LAST. For all that possible we
extend HFI flush command with one more argument and one more
flush_done HFI driver callback.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Fri, 3 Apr 2020 13:10:13 +0000 (15:10 +0200)]
media: venus: vdec: Init registered list unconditionally
Presently the list initialization is done only in
dynamic-resolution-change state, which leads to list corruptions
and use-after-free. Init list_head unconditionally in
vdec_stop_capture called by vb2 stop_streaming without takeing
into account current codec state.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Tue, 31 Mar 2020 16:19:51 +0000 (18:19 +0200)]
media: venus: vdec: Mark flushed buffers with error state
Once the hfi_session_flush is issued by the vdec all queued
buffers to firmware should be returned to the v4l driver. Some
of those buffers are not processed at the time of flush command,
those buffers has filled len zero (no data). Catch that in
buffer_done callback and mark not filled capture buffers with
error state so that client can discard them.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Tue, 31 Mar 2020 15:47:38 +0000 (17:47 +0200)]
media: venus: helpers: Done buffers per queue type
Currently calling venus_helper_buffers_done() will return buffers to
user for both capture and output queues in the same call. This is
wrong because both queues are really separate and calling
stop_streaming on one queue shouldn't return buffers for the other.
Solve this by add a new queue type argument and fix the clients of
the helper function.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Tue, 31 Mar 2020 15:42:52 +0000 (17:42 +0200)]
media: venus: core: Constify codec frequency data array
The array is not changed in the code, so make it const.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Tue, 31 Mar 2020 15:37:02 +0000 (17:37 +0200)]
media: venus: core: Fix mutex destroy in remove
The hfi_destroy function is called too early in remove method. It
destroys a mutex which is used later in the .remove from pmruntime.
Solve the issue by moving hfi_destroy after last usage of the mutex.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Tue, 31 Mar 2020 14:54:28 +0000 (16:54 +0200)]
media: venus: core: Add missing mutex destroy
This adds missing mutex_destroy in remove method of venus core driver.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 23 Apr 2020 11:42:32 +0000 (13:42 +0200)]
media: v4l2-ctrls.h: clarify the p_def argument of v4l2_ctrl_new_std_compound
It was not sufficiently clear how to create and use p_def.
Improve the documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 21 Apr 2020 09:23:41 +0000 (11:23 +0200)]
media: cec-gpio: handle gpiod_get_value errors correctly
gpiod_get_value() can return negative values if an error occurs.
In several places this error code was ignored.
Ensure that errors codes are handled correctly throughout the CEC
pin framework and CEC pin drivers.
The return code of the cec_pin_ops read() callback had to be changed
from 'bool' to 'int', which mean the prototype of that callback in the
sun4i drm driver also had to be changed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Mon, 20 Apr 2020 12:57:38 +0000 (14:57 +0200)]
media: vidioc-reqbufs/create-bufs.rst: fix typo
any others capabilities -> any other capabilities
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Lukas Bulwahn [Sat, 18 Apr 2020 09:45:46 +0000 (11:45 +0200)]
media: MAINTAINERS: adjust entries to moving CEC USB drivers
Commit
a81068181aad ("media: move CEC USB drivers to a separate directory")
moved drivers/media/usb/{pulse8,rainshadow}-cec to
drivers/media/cec/usb/{rainshadow,pulse8}, but did not adjust the entries
in MAINTAINERS.
Since then, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: drivers/media/usb/pulse8-cec/*
warning: no file matches F: drivers/media/usb/rainshadow-cec/*
Update the MAINTAINERS entries to the new file locations.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Fri, 17 Apr 2020 15:09:29 +0000 (17:09 +0200)]
media: vimc: cap: Report a colorspace
The colorspace reported by a video nodes should not be
V4L2_COLORSPACE_DEFAULT. Instead a default colorspace should be picked
by the driver if V4L2_COLORSPACE_DEFAULT is given by userspace to
{G,S,TRY}_FMT.
The colorspace V4L2_COLORSPACE_SRGB is arbitrary chosen as the vimc
default format to report as it's used for most webcams.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 22 Apr 2020 19:16:46 +0000 (21:16 +0200)]
media: si2157: ensure wait_status is initialized
smatch reports wait_status is uninitialized, because smatch cannot assume
the loop body is ever executed.
Clarify the code so that wait_status is retrieved at least once.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Tue, 21 Apr 2020 10:19:27 +0000 (12:19 +0200)]
media: rc: no need for decoder state if decoder not enabled
One struct ir_raw_event_ctrl is allocated per raw IR device; reduce the
amount allocated if not all decoders are enabled.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Thu, 16 Apr 2020 14:22:15 +0000 (16:22 +0200)]
media: m88ds3103: error in set_frontend is swallowed and not reported
Bail out if registers can not be updated.
Addresses-Coverity-ID:
1461655 ("Code maintainability issues")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Fixes:
e6089feca460 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 23 Apr 2020 15:58:13 +0000 (17:58 +0200)]
media: Kconfig: fix some dvb-usb-v2 dependencies
There are some tuners used by a few pure DVB boards that use
internally V4L2 function calls. Due to that, such drivers now
depends on v4l2 core support, and can't be auto-selected
if !VIDEO_V4L2:
WARNING: unmet direct dependencies detected for DVB_RTL2832_SDR
Depends on [n]: MEDIA_SUPPORT [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_CORE [=y] && I2C [=y] && I2C_MUX [=y] && VIDEO_V4L2 [=n] && MEDIA_SDR_SUPPORT [=y] && USB [=y]
Selected by [y]:
- DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y] && MEDIA_SDR_SUPPORT [=y]
WARNING: unmet direct dependencies detected for MEDIA_TUNER_E4000
Depends on [n]: (MEDIA_ANALOG_TV_SUPPORT [=y] || MEDIA_DIGITAL_TV_SUPPORT [=y] || MEDIA_RADIO_SUPPORT [=y] || MEDIA_SDR_SUPPORT [=y]) && MEDIA_SUPPORT [=y] && I2C [=y] && VIDEO_V4L2 [=n]
Selected by [y]:
- DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y]
WARNING: unmet direct dependencies detected for MEDIA_TUNER_FC2580
Depends on [n]: (MEDIA_ANALOG_TV_SUPPORT [=y] || MEDIA_DIGITAL_TV_SUPPORT [=y] || MEDIA_RADIO_SUPPORT [=y] || MEDIA_SDR_SUPPORT [=y]) && MEDIA_SUPPORT [=y] && I2C [=y] && VIDEO_V4L2 [=n]
Selected by [y]:
- DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y]
Detected via randconfig builds.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 23 Apr 2020 14:46:07 +0000 (16:46 +0200)]
media: platform: fix VIA_CAMERA dependencies
As detected by a randconfig:
WARNING: unmet direct dependencies detected for VIDEO_OV7670
Depends on [n]: MEDIA_SUPPORT [=y] && I2C [=y] && VIDEO_V4L2 [=n]
Selected by [y]:
- VIDEO_VIA_CAMERA [=y] && MEDIA_SUPPORT [=y] && MEDIA_PLATFORM_SUPPORT [=y] && V4L_PLATFORM_DRIVERS [=y] && FB_VIA [=y]
There's a missing dependency on VIDEO_V4L2 for VIA_CAMERA.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 22 Apr 2020 20:53:12 +0000 (22:53 +0200)]
media: tuners: Kconfig: add some missing VIDEO_V4L2 dependencies
There are three tuners that depend on some functions inside
V4L2 core:
$ git grep -l -E 'v4l2_[0-9a-zA-Z_]+\(' drivers/media/tuners/
drivers/media/tuners/e4000.c
drivers/media/tuners/fc2580.c
drivers/media/tuners/msi001.c
Make them dependent of VIDEO_V4L2, as otherwise, this would happen:
on x86_64:
CONFIG_VIDEO_V4L2=m
CONFIG_MEDIA_TUNER_E4000=y
ld: drivers/media/tuners/e4000.o: in function `e4000_remove':
e4000.c:(.text+0x34): undefined reference to `v4l2_ctrl_handler_free'
ld: drivers/media/tuners/e4000.o: in function `e4000_probe':
e4000.c:(.text+0x16c1): undefined reference to `v4l2_ctrl_handler_init_class'
ld: e4000.c:(.text+0x16eb): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x1731): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x1762): undefined reference to `v4l2_ctrl_auto_cluster'
ld: e4000.c:(.text+0x178c): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x17d6): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x1804): undefined reference to `v4l2_ctrl_auto_cluster'
ld: e4000.c:(.text+0x182e): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x1878): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x18a6): undefined reference to `v4l2_ctrl_auto_cluster'
ld: e4000.c:(.text+0x18d0): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x191a): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x1948): undefined reference to `v4l2_ctrl_auto_cluster'
ld: e4000.c:(.text+0x1972): undefined reference to `v4l2_ctrl_new_std'
ld: e4000.c:(.text+0x19a6): undefined reference to `v4l2_ctrl_handler_free'
ld: e4000.c:(.text+0x1a2a): undefined reference to `v4l2_i2c_subdev_init'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 22 Apr 2020 13:59:54 +0000 (15:59 +0200)]
MAINTAINERS: reorder media attributes
Some media entry attributes got out of the order after the
bug was split into 3. Also, as reported by Johan, the
Rockchip VPU entry also had their attributes at the wrong
order.
As those entries weren't merged yet upstream, let's reorder
them with:
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Reported-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ezequiel Garcia [Wed, 22 Apr 2020 11:14:03 +0000 (13:14 +0200)]
media: MAINTAINERS: Fix Hantro, Rga and Rkvdec entries
It seems recent merges introduced a couple issues
here, so let's fix them all. Also, reorder Rockchip
video decoder as per parse-maintainers.pl script
and add linux-rockchip mailing list.
Reported-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 22 Apr 2020 11:14:21 +0000 (13:14 +0200)]
media: rkisp1: fix missing mbus.type -> mbus_type conversion
There was one missing sensor->mbus.type to sensor->mbus_type
conversion which broke the build.
I suspect this was due to a merge conflict that was incorrectly resolved.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 10:07:11 +0000 (12:07 +0200)]
media: admin-guide: split driver-specific indexes to new files
In order to better organize the main admin-guide index,
place the driver-specific indexes on separate files.
This ensures a more consistent numbering at the main index.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 09:59:24 +0000 (11:59 +0200)]
media: admin-guide: reorganize the guide
Separate the generic documentation from the driver-specific
parts, and use a better title for the documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 09:59:20 +0000 (11:59 +0200)]
media: admin-guide: bt8xx.rst: fix a broken cross-reference
The old cards.rst file doesn't exist anymore. Also, it is not
the right reference there, as it should be pointing to the
bttv-specific cardlist.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 09:15:06 +0000 (11:15 +0200)]
media: admin-guide: add test-drivers
While test drivers is probably something that normal users
won't bother, it doesn't hurt to add them to the card list.
This way, all drivers, except for the ones under staging,
would be listed there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 09:13:58 +0000 (11:13 +0200)]
media: admin-guide: add card lists for radio and firewire
Document the supported radio devices, plus document the
firewire driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 09:13:58 +0000 (11:13 +0200)]
media: admin-guide: add SPI cards to platform drivers
The SPI cards are also under the concept of "platform" drivers
as defined at the section introduction.
So, add a SPI card list there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 09:08:54 +0000 (11:08 +0200)]
media: admin-guide: add a list of I2C drivers
For completeness, let's add a list of I2C drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 08:56:34 +0000 (10:56 +0200)]
media: admin-guide: add a list of platform drivers
There's no reason why to keep platform drivers out of the
card list. Add them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 08:48:04 +0000 (10:48 +0200)]
media: admin-guide: add a table with USB drivers
Having a table with a list of all USB drivers seems worth,
and it comes almost for free, as we can just use Kconfig
descriptions (with some adjustments).
So, add a table for that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 08:23:29 +0000 (10:23 +0200)]
media: admin-guide: add a list of media PCI cards
Instead of listing "other" PCI card list, just add a list with
the existing drivers (not including sub-drivers).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 08:16:06 +0000 (10:16 +0200)]
media: admin-guide: replace the frontend drivers list
The frontend drivers list is incomplete. Update it from
what's there at the Kernel Kconfig files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Sat, 18 Apr 2020 06:40:57 +0000 (08:40 +0200)]
media: admin-guide: split DVB cards.rst
The DVB cards.rst file is old and outdated. It also contains
data that are contained on other cardlists. Remove the
duplicated information and split frontends and PCI cards on
separate files.
As all USB cards already have their own card lists, just drop
the old USB data there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 17 Apr 2020 15:58:04 +0000 (17:58 +0200)]
media: admin-guide: add a cardlist for all other USB cards
There are several other USB cards. Most of them support just
one device. The only exception is the "pwc" driver. But, as
updates to it are not frequent, let's just place everything
manually into a single file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 17 Apr 2020 16:42:24 +0000 (18:42 +0200)]
media: admin-guide: add a card list for the Siano driver
The siano driver looks like em28xx, except that its cards
are split on 3 drivers.
Add a card list for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 17 Apr 2020 10:36:51 +0000 (12:36 +0200)]
media: admin-guide: add support for the remaining dvb-usb boards
Add documentation for the remaining dvb-usb boards.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 17 Apr 2020 08:58:43 +0000 (10:58 +0200)]
media: admin-guide: add dibusb-mb and dibusb-mc card lists
Document the supported dib0300 boards.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 15:07:03 +0000 (17:07 +0200)]
media: admin-guide: add cardlist for dib0700 driver
Document the cards supported by dib0700 driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 13:17:06 +0000 (15:17 +0200)]
media: admin-guide: add dvb-usb-v2 card lists
Include cardlist documentation for the sub-drivers supported by
dvb-usb-v2 core.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 12:20:54 +0000 (14:20 +0200)]
media: admin-guide: improve cardlist.rst documentation
The cardlist section is important for some boards, because they
may require extra modprobe parameters.
Improve the docs to mention that.
Thanks-to: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for providing me some PCI IDs
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 11:31:50 +0000 (13:31 +0200)]
media: admin-guide: add a generic building guide
Several of the existing documents under the media admin-guide
contain build procedures.
Add an specific chapter describing it. This document was
partially inspired on the modifications I made to the bttv.rst
file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 11:31:40 +0000 (13:31 +0200)]
media: admin-guide: Add an introduction chapter
The media's admin guide is currently just a group of
not-connected docs.
Add an introduction chapter for it to start making sense
to a random reader.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 10:37:23 +0000 (12:37 +0200)]
media: admin-guide: update em28xx cardlist
A new em28xx card was added upstream. Update cards list
accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 10:24:02 +0000 (12:24 +0200)]
media: admin-guide: add a card list for cx231xx boards
It is interesting to have a card list also for cx231xx
driver, as it currently supports 27 different boards.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 17 Apr 2020 15:29:40 +0000 (17:29 +0200)]
media: pwc-if: place USB device list on numberical order
It seems easier to maintain the list if the USB_DEVICE
is ordered.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 17 Apr 2020 15:26:56 +0000 (17:26 +0200)]
media: pwc-if.c: Update comments about each pwc supported model
The USB_DEVICE() list contain some of the product names, but
some are missing, and others are different than the message
printed during device detection.
Update the comments in order to match what the driver prints.
That makes easier to discover what model matches what physical
device.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Apr 2020 14:11:52 +0000 (16:11 +0200)]
media: dvb-usb-v2: use DVB_USB_DEVICE() macro
Instead of using USB_DEVICE() macro directly, use the
DVB_USB_DEVICE() one, as other dvb-usb-v2 devices.
The usage of the new macro makes cleaner and easier to
parse the supported device names in a way that it would
be easily parseable to generate cardlists.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>