OSDN Git Service
Ben Skeggs [Mon, 30 Jan 2023 22:37:15 +0000 (08:37 +1000)]
drm/nouveau/acr/gm20b: regression fixes
Missed some Tegra-specific quirks when reworking ACR to support Ampere.
Fixes:
2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-3-bskeggs@redhat.com
Ben Skeggs [Mon, 30 Jan 2023 22:37:14 +0000 (08:37 +1000)]
drm/nouveau/fb/tu102-: fix register used to determine scrub status
Turing apparently needs to use the same register we use on Ampere.
Not executing the scrubber ucode when required would result in large
areas of VRAM being inaccessible to the driver.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-2-bskeggs@redhat.com
Ben Skeggs [Mon, 30 Jan 2023 22:37:13 +0000 (08:37 +1000)]
drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
Starting from Turing, the driver is no longer responsible for initiating
DEVINIT when required as the GPU started loading a FW image from ROM and
executing DEVINIT itself after power-on.
However - we apparently still need to wait for it to complete.
This should correct some issues with runpm on some systems, where we get
control of the HW before it's been fully reinitialised after resume from
suspend.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-1-bskeggs@redhat.com
Danilo Krummrich [Thu, 26 Jan 2023 00:28:44 +0000 (01:28 +0100)]
dma-buf: actually set signaling bit for private stub fences
In dma_fence_allocate_private_stub() set the signaling bit of the newly
allocated private stub fence rather than the signaling bit of the
shared dma_fence_stub.
Cc: <stable@vger.kernel.org> # v6.1
Fixes:
c85d00d4fd8b ("dma-buf: set signaling bit for the stub fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126002844.339593-1-dakr@redhat.com
Javier Martinez Canillas [Wed, 25 Jan 2023 18:42:30 +0000 (19:42 +0100)]
drm/ssd130x: Init display before the SSD130X_DISPLAY_ON command
Commit
622113b9f11f ("drm/ssd130x: Replace simple display helpers with the
atomic helpers") changed the driver to just use the atomic helpers instead
of the simple KMS abstraction layer.
But the commit also made a subtle change on the display power sequence and
initialization order, by moving the ssd130x_power_on() call to the encoder
.atomic_enable handler and the ssd130x_init() call to CRTC .reset handler.
Before this change, both ssd130x_power_on() and ssd130x_init() were called
in the simple display pipeline .enable handler, so the display was already
initialized by the time the SSD130X_DISPLAY_ON command was sent.
For some reasons, it only made the ssd130x SPI driver to fail but the I2C
was still working. That is the reason why the bug was not noticed before.
To revert to the old driver behavior, move the ssd130x_init() call to the
encoder .atomic_enable as well. Besides fixing the panel not being turned
on when using SPI, it also gets rid of the custom CRTC .reset callback.
Fixes:
622113b9f11f ("drm/ssd130x: Replace simple display helpers with the atomic helpers")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125184230.3343206-1-javierm@redhat.com
Hans Verkuil [Thu, 19 Jan 2023 09:02:19 +0000 (10:02 +0100)]
drm/vc4: hdmi: make CEC adapter name unique
The bcm2711 has two HDMI outputs, each with their own CEC adapter.
The CEC adapter name has to be unique, but it is currently
hardcoded to "vc4" for both outputs. Change this to use the card_name
from the variant information in order to make the adapter name unique.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes:
15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/dcf1db75-d9cc-62cc-fa12-baf1b2b3bf31@xs4all.nl
Javier Martinez Canillas [Sat, 21 Jan 2023 19:24:18 +0000 (20:24 +0100)]
drm/fb-helper: Use a per-driver FB deferred I/O handler
The DRM fbdev emulation layer sets the struct fb_info .fbdefio field to
a struct fb_deferred_io pointer, that is shared across all drivers that
use the generic drm_fbdev_generic_setup() helper function.
It is a problem because the fbdev core deferred I/O logic assumes that
the struct fb_deferred_io data is not shared between devices, and it's
stored there state such as the list of pages touched and a mutex that
is use to synchronize between the fb_deferred_io_track_page() function
that track the dirty pages and fb_deferred_io_work() workqueue handler
doing the actual deferred I/O.
The latter can lead to the following error, since it may happen that two
drivers are probed and then one is removed, which causes the mutex bo be
destroyed and not existing anymore by the time the other driver tries to
grab it for the fbdev deferred I/O logic:
[ 369.756553] ------------[ cut here ]------------
[ 369.756604] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 369.756631] WARNING: CPU: 2 PID: 1023 at kernel/locking/mutex.c:582 __mutex_lock+0x348/0x424
[ 369.756744] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip
v6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr btsdio bluetooth sunrpc brcmfmac snd_soc_hdmi_codec cpufreq_dt cfg80211 vfat fat vc4 rfkill brcmutil raspberrypi_cpufreq i2c_bcm2835 iproc_rng200 bcm2711_thermal snd_soc_core snd_pcm_dmaen
gine leds_gpio nvmem_rmem joydev hid_cherry uas usb_storage gpio_raspberrypi_exp v3d snd_pcm raspberrypi_hwmon gpu_sched bcm2835_wdt broadcom bcm_phy_lib snd_timer genet snd mdio_bcm_unimac clk_bcm2711_dvp soundcore drm_display_helper pci
e_brcmstb cec ip6_tables ip_tables fuse
[ 369.757400] CPU: 2 PID: 1023 Comm: fbtest Not tainted 5.19.0-rc6+ #94
[ 369.757455] Hardware name: raspberrypi,4-model-b Raspberry Pi 4 Model B Rev 1.4/Raspberry Pi 4 Model B Rev 1.4, BIOS 2022.10 10/01/2022
[ 369.757538] pstate:
00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 369.757596] pc : __mutex_lock+0x348/0x424
[ 369.757635] lr : __mutex_lock+0x348/0x424
[ 369.757672] sp :
ffff80000953bb00
[ 369.757703] x29:
ffff80000953bb00 x28:
ffff17fdc087c000 x27:
0000000000000002
[ 369.757771] x26:
ffff17fdc349f9b0 x25:
fffffc5ff72e0100 x24:
0000000000000000
[ 369.757838] x23:
0000000000000000 x22:
0000000000000002 x21:
ffffa618df636f10
[ 369.757903] x20:
ffff80000953bb68 x19:
ffffa618e0f18138 x18:
0000000000000001
[ 369.757968] x17:
0000000020000000 x16:
0000000000000002 x15:
0000000000000000
[ 369.758032] x14:
0000000000000000 x13:
284e4f5f4e524157 x12:
5f534b434f4c5f47
[ 369.758097] x11:
00000000ffffdfff x10:
ffffa618e0c79f88 x9 :
ffffa618de472484
[ 369.758162] x8 :
000000000002ffe8 x7 :
c0000000ffffdfff x6 :
00000000000affa8
[ 369.758227] x5 :
0000000000001fff x4 :
0000000000000000 x3 :
0000000000000027
[ 369.758292] x2 :
0000000000000001 x1 :
ffff17fdc087c000 x0 :
0000000000000028
[ 369.758357] Call trace:
[ 369.758383] __mutex_lock+0x348/0x424
[ 369.758420] mutex_lock_nested+0x4c/0x5c
[ 369.758459] fb_deferred_io_mkwrite+0x78/0x1d8
[ 369.758507] do_page_mkwrite+0x5c/0x19c
[ 369.758550] wp_page_shared+0x70/0x1a0
[ 369.758590] do_wp_page+0x3d0/0x510
[ 369.758628] handle_pte_fault+0x1c0/0x1e0
[ 369.758670] __handle_mm_fault+0x250/0x380
[ 369.758712] handle_mm_fault+0x17c/0x3a4
[ 369.758753] do_page_fault+0x158/0x530
[ 369.758792] do_mem_abort+0x50/0xa0
[ 369.758831] el0_da+0x78/0x19c
[ 369.758864] el0t_64_sync_handler+0xbc/0x150
[ 369.758904] el0t_64_sync+0x190/0x194
[ 369.758942] irq event stamp: 11395
[ 369.758973] hardirqs last enabled at (11395): [<
ffffa618de472554>] __up_console_sem+0x74/0x80
[ 369.759042] hardirqs last disabled at (11394): [<
ffffa618de47254c>] __up_console_sem+0x6c/0x80
[ 369.760554] softirqs last enabled at (11392): [<
ffffa618de330a74>] __do_softirq+0x4c4/0x6b8
[ 369.762060] softirqs last disabled at (11383): [<
ffffa618de3c9124>] __irq_exit_rcu+0x104/0x214
[ 369.763564] ---[ end trace
0000000000000000 ]---
Fixes:
d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-4-javierm@redhat.com
Javier Martinez Canillas [Sat, 21 Jan 2023 19:24:17 +0000 (20:24 +0100)]
drm/fb-helper: Check fb_deferred_io_init() return value
The fb_deferred_io_init() can fail and return an errno code but currently
there is no check for its return value.
Fix that and propagate to errno to the caller in the case of a failure.
Fixes:
d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-3-javierm@redhat.com
Nirmoy Das [Tue, 17 Jan 2023 17:52:36 +0000 (18:52 +0100)]
drm/i915: Fix a memory leak with reused mmap_offset
drm_vma_node_allow() and drm_vma_node_revoke() should be called in
balanced pairs. We call drm_vma_node_allow() once per-file everytime a
user calls mmap_offset, but only call drm_vma_node_revoke once per-file
on each mmap_offset. As the mmap_offset is reused by the client, the
per-file vm_count may remain non-zero and the rbtree leaked.
Call drm_vma_node_allow_once() instead to prevent that memory leak.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Fixes:
786555987207 ("drm/i915/gem: Store mmap_offsets in an rbtree rather than a plain list")
Reported-by: Chuansheng Liu <chuansheng.liu@intel.com>
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230117175236.22317-2-nirmoy.das@intel.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Nirmoy Das [Tue, 17 Jan 2023 17:52:35 +0000 (18:52 +0100)]
drm/drm_vma_manager: Add drm_vma_node_allow_once()
Currently there is no easy way for a drm driver to safely check and allow
drm_vma_offset_node for a drm file just once. Allow drm drivers to call
non-refcounted version of drm_vma_node_allow() so that a driver doesn't
need to keep track of each drm_vma_node_allow() to call subsequent
drm_vma_node_revoke() to prevent memory leak.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230117175236.22317-1-nirmoy.das@intel.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Nirmoy Das [Wed, 18 Jan 2023 17:06:24 +0000 (18:06 +0100)]
drm/i915: Remove unused variable
Removed unused i915 var.
Fixes:
a273e95721e9 ("drm/i915: Allow switching away via vga-switcheroo if uninitialized")
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118170624.9326-1-nirmoy.das@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Thomas Zimmermann [Mon, 16 Jan 2023 11:54:24 +0000 (12:54 +0100)]
drm/fb-helper: Set framebuffer for vga-switcheroo clients
Set the framebuffer info for drivers that support VGA switcheroo. Only
affects the amdgpu and nouveau drivers, which use VGA switcheroo and
generic fbdev emulation. For other drivers, this does nothing.
This fixes a potential regression in the console code. Both, amdgpu and
nouveau, invoked vga_switcheroo_client_fb_set() from their internal fbdev
code. But the call got lost when the drivers switched to the generic
emulation.
Fixes:
087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Fixes:
4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: "Tianci.Yin" <tianci.yin@amd.com>
Cc: Xiaojian Du <Xiaojian.Du@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Bokun Zhang <Bokun.Zhang@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Solomon Chiu <solomon.chiu@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.17+
Link: https://patchwork.freedesktop.org/patch/msgid/20230116115425.13484-3-tzimmermann@suse.de
Thomas Zimmermann [Mon, 16 Jan 2023 11:54:23 +0000 (12:54 +0100)]
drm/i915: Allow switching away via vga-switcheroo if uninitialized
Always allow switching away via vga-switcheroo if the display is
uninitalized. Instead prevent switching to i915 if the device has
not been initialized.
This issue was introduced by commit
5df7bd130818 ("drm/i915: skip
display initialization when there is no display") protected, which
protects code paths from being executed on uninitialized devices.
In the case of vga-switcheroo, we want to allow a switch away from
i915's device. So run vga_switcheroo_process_delayed_switch() and
test in the switcheroo callbacks if the i915 device is available.
Fixes:
5df7bd130818 ("drm/i915: skip display initialization when there is no display")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: "Jouni Högander" <jouni.hogander@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20230116115425.13484-2-tzimmermann@suse.de
Arnd Bergmann [Tue, 17 Jan 2023 16:44:43 +0000 (17:44 +0100)]
drm/panfrost: fix GENERIC_ATOMIC64 dependency
On ARMv5 and earlier, a randconfig build can still run into
WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE
Depends on [n]: IOMMU_SUPPORT [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y]) && !GENERIC_ATOMIC64 [=y]
Selected by [y]:
- DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) && MMU [=y]
Rework the dependencies to always require a working cmpxchg64.
Fixes:
db594ba3fcf9 ("drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117164456.1591901-1-arnd@kernel.org
Maxime Ripard [Fri, 13 Jan 2023 15:46:37 +0000 (16:46 +0100)]
drm/vc4: bo: Fix unused variable warning
Commit
07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
removed the only use of the ret variable, but didn't remove the
variable itself leading to a unused variable warning.
Remove that variable.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113154637.1704116-1-maxime@cerno.tech
Maxime Ripard [Thu, 12 Jan 2023 09:12:43 +0000 (10:12 +0100)]
drm/vc4: bo: Fix drmm_mutex_init memory hog
Commit
374146cad469 ("drm/vc4: Switch to drmm_mutex_init") converted,
among other functions, vc4_create_object() to use drmm_mutex_init().
However, that function is used to allocate a BO, and therefore the
mutex needs to be freed much sooner than when the DRM device is removed
from the system.
For each buffer allocation we thus end up allocating a small structure
as part of the DRM-managed mechanism that is never freed, eventually
leading us to no longer having any free memory anymore.
Let's switch back to mutex_init/mutex_destroy to deal with it properly.
Fixes:
374146cad469 ("drm/vc4: Switch to drmm_mutex_init")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230112091243.490799-1-maxime@cerno.tech
Arunpravin Paneer Selvam [Thu, 12 Jan 2023 12:00:27 +0000 (04:00 -0800)]
drm: Optimize drm buddy top-down allocation method
We are observing performance drop in many usecases which include
games, 3D benchmark applications,etc.. To solve this problem, We
are strictly not allowing top down flag enabled allocations to
steal the memory space from cpu visible region.
The idea is, we are sorting each order list entries in
ascending order and compare the last entry of each order
list in the freelist and return the max block.
This patch improves the 3D benchmark scores and solves
fragmentation issues.
All drm buddy selftests are verfied.
drm_buddy: pass:6 fail:0 skip:0 total:6
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230112120027.3072-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: Cc: stable@vger.kernel.org # 5.18+
Zack Rusin [Wed, 11 Jan 2023 17:50:15 +0000 (12:50 -0500)]
drm/ttm: Fix a regression causing kernel oops'es
The branch is explicitly taken if ttm == NULL which means that to avoid
a null pointer reference the ttm object can not be used inside. Switch
back to dst_mem to avoid kernel oops'es.
This fixes kernel oops'es with any buffer objects which don't have ttm_tt,
e.g. with vram based screen objects on vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes:
e3c92eb4a84f ("drm/ttm: rework on ttm_resource to use size_t type")
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111175015.1134923-1-zack@kde.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Thomas Zimmermann [Tue, 10 Jan 2023 12:35:26 +0000 (13:35 +0100)]
drm/nouveau: Remove file nouveau_fbcon.c
Commit
4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
converted nouveau to generic fbdev emulation. The driver's internal
implementation later got accidentally restored during a merge commit.
Remove the file from the driver. No functional changes.
v2:
* point Fixes tag to merge commit (Alex)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes:
4e291f2f5853 ("Merge tag 'drm-misc-next-2022-11-10-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230110123526.28770-1-tzimmermann@suse.de
Christian König [Mon, 9 Jan 2023 08:06:03 +0000 (09:06 +0100)]
drm/amdgpu: fix pipeline sync v2
This fixes a potential memory leak of dma_fence objects in the CS code
as well as glitches in firefox because of missing pipeline sync.
v2: use the scheduler instead of the fence context
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2323
Tested-by: Michal Kubecek mkubecek@suse.cz
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109130120.73389-1-christian.koenig@amd.com
Zack Rusin [Wed, 7 Dec 2022 17:29:07 +0000 (12:29 -0500)]
drm/vmwgfx: Remove rcu locks from user resources
User resource lookups used rcu to avoid two extra atomics. Unfortunately
the rcu paths were buggy and it was easy to make the driver crash by
submitting command buffers from two different threads. Because the
lookups never show up in performance profiles replace them with a
regular spin lock which fixes the races in accesses to those shared
resources.
Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and
seen crashes with apps using shared resources.
Fixes:
e14c02e6b699 ("drm/vmwgfx: Look up objects without taking a reference")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207172907.959037-1-zack@kde.org
Rob Clark [Fri, 16 Dec 2022 23:33:55 +0000 (15:33 -0800)]
drm/virtio: Fix GEM handle creation UAF
Userspace can guess the handle value and try to race GEM object creation
with handle close, resulting in a use-after-free if we dereference the
object after dropping the handle's reference. For that reason, dropping
the handle's reference must be done *after* we are done dereferencing
the object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Fixes:
62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216233355.542197-2-robdclark@gmail.com
Patrick Thompson [Tue, 20 Dec 2022 20:58:26 +0000 (15:58 -0500)]
drm: Add orientation quirk for Lenovo ideapad D330-10IGL
Panel is 800x1280 but mounted on a detachable form factor sideways.
Signed-off-by: Patrick Thompson <ptf@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220205826.178008-1-ptf@google.com
Christian König [Thu, 5 Jan 2023 10:27:16 +0000 (11:27 +0100)]
drm/amdgpu: fix missing dma_fence_put in error path
When the fence can't be added we need to drop the reference.
Suggested-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105111703.52695-2-christian.koenig@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Christian König [Thu, 5 Jan 2023 09:45:36 +0000 (10:45 +0100)]
drm/amdgpu: fix another missing fence reference in the CS code
drm_sched_job_add_dependency() consumes the references of the gang
members. Only triggered by mesh shaders.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes:
1728baa7e4e6 ("drm/amdgpu: use scheduler dependencies for CS")
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Bert Karwatzki <spasswolf@web.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105111703.52695-1-christian.koenig@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Daniel Vetter [Thu, 5 Jan 2023 08:43:36 +0000 (09:43 +0100)]
Merge tag 'drm-misc-fixes-2023-01-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Several fixes to fix the error path of dma_buf_export, add a missing
structure declaration resulting in a compiler warning, fix the GEM
handle refcounting in panfrost, fix a corrupted image with AFBC on
meson, a memleak in virtio, improper plane width for imx, and a lockup
in drm_sched_entity_kill()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105074909.qd2h23hpxac4lxi7@houat
Daniel Vetter [Tue, 3 Jan 2023 20:02:28 +0000 (21:02 +0100)]
Merge tag 'drm-misc-next-fixes-2023-01-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Maxime writes:
"The drm-misc-next-fixes leftovers. It addresses a bug in drm/scheduler
ending up causing a lockup, and reduces the stack usage of some drm/mm
kunit tests."
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103144926.bmjjni3xnuis2jmq@houat
Dmitry Osipenko [Wed, 23 Nov 2022 00:13:03 +0000 (03:13 +0300)]
drm/scheduler: Fix lockup in drm_sched_entity_kill()
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes:
2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
Maxime Ripard [Tue, 3 Jan 2023 07:32:12 +0000 (08:32 +0100)]
Merge drm/drm-fixes into drm-misc-fixes
Let's start the fixes cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Philipp Zabel [Tue, 8 Nov 2022 14:14:20 +0000 (15:14 +0100)]
drm/imx: ipuv3-plane: Fix overlay plane width
ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.
drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.
Fixes:
94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221108141420.176696-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108141420.176696-1-p.zabel@pengutronix.de
Tested-by: Ian Ray <ian.ray@ge.com>
(cherry picked from commit
4333472f8d7befe62359fecb1083cd57a6e07bfc)
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Dmitry Osipenko [Wed, 23 Nov 2022 00:13:03 +0000 (03:13 +0300)]
drm/scheduler: Fix lockup in drm_sched_entity_kill()
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes:
2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
Xiu Jianfeng [Wed, 9 Nov 2022 09:19:05 +0000 (17:19 +0800)]
drm/virtio: Fix memory leak in virtio_gpu_object_create()
The virtio_gpu_object_shmem_init() will alloc memory and save it in
@ents, so when virtio_gpu_array_alloc() fails, this memory should be
freed, this patch fixes it.
Fixes:
e7fef0923303 ("drm/virtio: Simplify error handling of virtio_gpu_object_create()")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109091905.55451-1-xiujianfeng@huawei.com
Carlo Caione [Mon, 19 Dec 2022 08:43:05 +0000 (09:43 +0100)]
drm/meson: Reduce the FIFO lines held when AFBC is not used
Having a bigger number of FIFO lines held after vsync is only useful to
SoCs using AFBC to give time to the AFBC decoder to be reset, configured
and enabled again.
For SoCs not using AFBC this, on the contrary, is causing on some
displays issues and a few pixels vertical offset in the displayed image.
Conditionally increase the number of lines held after vsync only for
SoCs using AFBC, leaving the default value for all the others.
Fixes:
24e0d4058eff ("drm/meson: hold 32 lines after vsync to give time for AFBC start")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: added fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216-afbc_s905x-v1-0-033bebf780d9@baylibre.com
Linus Torvalds [Sun, 1 Jan 2023 21:53:16 +0000 (13:53 -0800)]
Linux 6.2-rc2
Linus Torvalds [Sun, 1 Jan 2023 19:27:00 +0000 (11:27 -0800)]
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
Linus Torvalds [Sun, 1 Jan 2023 19:19:50 +0000 (11:19 -0800)]
Merge tag 'x86_urgent_for_v6.2_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
Linus Torvalds [Sun, 1 Jan 2023 19:15:05 +0000 (11:15 -0800)]
Merge tag 'locking_urgent_for_v6.2_rc2' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Prevent the leaking of a debug timer in futex_waitv()
- A preempt-RT mutex locking fix, adding the proper acquire semantics
* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
Linus Torvalds [Sun, 1 Jan 2023 19:11:13 +0000 (11:11 -0800)]
Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
Daniel Vetter [Sun, 1 Jan 2023 10:52:11 +0000 (11:52 +0100)]
Merge tag 'drm-intel-fixes-2022-12-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
Linus Torvalds [Sat, 31 Dec 2022 18:21:47 +0000 (10:21 -0800)]
Merge tag 'kbuild-fixes-v6.2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
Linus Torvalds [Sat, 31 Dec 2022 18:01:44 +0000 (10:01 -0800)]
Merge tag 'ata-6.2-rc2' of git://git./linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
Linus Torvalds [Fri, 30 Dec 2022 18:47:25 +0000 (10:47 -0800)]
Merge tag 'acpi-6.2-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Linus Torvalds [Fri, 30 Dec 2022 18:30:54 +0000 (10:30 -0800)]
Merge tag 'sound-6.2-rc2' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
Rafael J. Wysocki [Fri, 30 Dec 2022 15:59:10 +0000 (16:59 +0100)]
Merge branches 'acpi-resource' and 'acpi-video'
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Jani Nikula [Tue, 20 Dec 2022 14:01:05 +0000 (16:01 +0200)]
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.
Fixes:
963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit
a561933c571798868b5fa42198427a7e6df56c09)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Jani Nikula [Mon, 19 Dec 2022 10:59:55 +0000 (12:59 +0200)]
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit
f087cfe6fcff58044f7aa3b284965af47f472fb0)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Masahiro Yamada [Fri, 30 Dec 2022 08:16:42 +0000 (17:16 +0900)]
fixdep: remove unneeded <stdarg.h> inclusion
This is unneeded since commit
69304379ff03 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Thu, 29 Dec 2022 12:16:42 +0000 (21:16 +0900)]
kbuild: sort single-targets alphabetically again
This was previously alphabetically sorted. Sort it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Masahiro Yamada [Wed, 28 Dec 2022 19:10:14 +0000 (04:10 +0900)]
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit
8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes:
8818039f959b ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Samuel Holland [Tue, 27 Dec 2022 21:48:21 +0000 (15:48 -0600)]
kbuild: Fix running modpost with musl libc
commit
3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes:
3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Jun ASAKA [Tue, 27 Dec 2022 09:21:57 +0000 (17:21 +0800)]
kbuild: add a missing line for help message
The help message line for building the source RPM package was missing.
Added it.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 26 Dec 2022 18:54:44 +0000 (03:54 +0900)]
.gitignore: ignore *.rpm
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit
8818039f959b ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 26 Dec 2022 18:45:37 +0000 (03:45 +0900)]
arch: fix broken BuildID for arm64 and riscv
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit
994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit
2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes:
994b7ac1697b ("arm64: remove special treatment for the link order of head.o")
Fixes:
2348e6bf4421 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
John Harrison [Wed, 21 Dec 2022 19:30:31 +0000 (11:30 -0800)]
drm/i915/uc: Fix two issues with over-size firmware files
In the case where a firmware file is too large (e.g. someone
downloaded a web page ASCII dump from github...), the firmware object
is released but the pointer is not zerod. If no other firmware file
was found then release would be called again leading to a double kfree.
Also, the size check was only being applied to the initial firmware
load not any of the subsequent attempts. So move the check into a
wrapper that is used for all loads.
Fixes:
016241168dc5 ("drm/i915/uc: use different ggtt pin offsets for uc loads")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com
(cherry picked from commit
4071d98b296a5bc5fd4b15ec651bd05800ec9510)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matthew Auld [Fri, 16 Dec 2022 11:34:56 +0000 (11:34 +0000)]
drm/i915: improve the catch-all evict to handle lock contention
The catch-all evict can fail due to object lock contention, since it
only goes as far as trylocking the object, due to us already holding the
vm->mutex. Doing a full object lock here can deadlock, since the
vm->mutex is always our inner lock. Add another execbuf pass which drops
the vm->mutex and then tries to grab the object will the full lock,
before then retrying the eviction. This should be good enough for now to
fix the immediate regression with userspace seeing -ENOSPC from execbuf
due to contended object locks during GTT eviction.
v2 (Mani)
- Also revamp the docs for the different passes.
Testcase: igt@gem_ppgtt@shrink-vs-evict-*
Fixes:
7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570
References: https://bugzilla.mozilla.org/show_bug.cgi?id=
1779558
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Mani Milani <mani@chromium.org>
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Mani Milani <mani@chromium.org>
Tested-by: Mani Milani <mani@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com
(cherry picked from commit
801fa7a81f6da533cc5442fc40e32c72b76cd42a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Lucas De Marchi [Wed, 14 Dec 2022 19:49:44 +0000 (11:49 -0800)]
drm/i915: Remove __maybe_unused from mtl_info
The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.
Fixes:
7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com
(cherry picked from commit
50490ce05b7a50b0bd4108fa7d6db3ca2972fa83)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Andrzej Hajda [Wed, 14 Dec 2022 07:54:39 +0000 (08:54 +0100)]
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
In case of Gen12.50 video and compute engines, TLB_INV registers are
masked - to modify one bit, corresponding bit in upper half of the register
must be enabled, otherwise nothing happens.
Fixes:
77fa9efc16a9 ("drm/i915/xehp: Create separate reg definitions for new MCR registers")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com
(cherry picked from commit
4d5cf7b1680a1e6db327e3c935ef58325cbedb2c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Linus Torvalds [Fri, 30 Dec 2022 00:57:29 +0000 (16:57 -0800)]
Merge tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
Linus Torvalds [Fri, 30 Dec 2022 00:48:21 +0000 (16:48 -0800)]
Merge tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Two fixes for mutex grabbing when the task state is != TASK_RUNNING
(me)
- Check for invalid opcode in io_uring_register() a bit earlier, to
avoid going through the quiesce machinery just to return -EINVAL
later in the process (me)
- Fix for the uapi io_uring header, skipping including time_types.h
when necessary (Stefan)
* tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux:
uapi:io_uring.h: allow linux/time_types.h to be skipped
io_uring: check for valid register opcode earlier
io_uring/cancel: re-grab ctx mutex after finishing wait
io_uring: finish waiting before flushing overflow entries
Linus Torvalds [Fri, 30 Dec 2022 00:43:25 +0000 (16:43 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
- alloc_string_stream_fragment() error path fix to free before
returning a failure.
* tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: alloc_string_stream_fragment error handling bug fix
Linus Torvalds [Thu, 29 Dec 2022 18:56:13 +0000 (10:56 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Changes that were posted too late for 6.1, or after the release.
x86:
- several fixes to nested VMX execution controls
- fixes and clarification to the documentation for Xen emulation
- do not unnecessarily release a pmu event with zero period
- MMU fixes
- fix Coverity warning in kvm_hv_flush_tlb()
selftests:
- fixes for the ucall mechanism in selftests
- other fixes mostly related to compilation with clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits)
KVM: selftests: restore special vmmcall code layout needed by the harness
Documentation: kvm: clarify SRCU locking order
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
KVM: x86/xen: Documentation updates and clarifications
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
KVM: x86/xen: Simplify eventfd IOCTLs
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
KVM: Delete extra block of "};" in the KVM API documentation
kvm: x86/mmu: Remove duplicated "be split" in spte.h
kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
MAINTAINERS: adjust entry after renaming the vmx hyperv files
KVM: selftests: Mark correct page as mapped in virt_map()
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
KVM: selftests: Use magic value to signal ucall_alloc() failure
KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning
KVM: selftests: Include lib.mk before consuming $(CC)
KVM: selftests: Explicitly disable builtins for mem*() overrides
...
Jens Axboe [Thu, 29 Dec 2022 18:31:45 +0000 (11:31 -0700)]
Merge tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme into block-6.2
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix various problems in handling the Command Supported and Effects log
(Christoph Hellwig)
- don't allow unprivileged passthrough of commands that don't transfer
data but modify logical block content (Christoph Hellwig)
- add a features and quirks policy document (Christoph Hellwig)
- fix some really nasty code that was correct but made smatch complain
(Sagi Grimberg)"
* tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
Bhaskar Chowdhury [Sat, 17 Dec 2022 05:51:48 +0000 (11:21 +0530)]
kconfig: Add static text for search information in help menu
Add few static text to explain how one can bring up the search dialog
box by pressing the forward slash key anywhere on this interface.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Sagi Grimberg [Sun, 25 Dec 2022 11:28:51 +0000 (13:28 +0200)]
nvme-auth: fix smatch warning complaints
When initializing auth context, there may be no secrets passed
by the user. Make return code explicit when returning successfully.
smatch warnings:
drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Tue, 13 Dec 2022 15:13:38 +0000 (16:13 +0100)]
nvme: consult the CSE log page for unprivileged passthrough
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes:
e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Christoph Hellwig [Wed, 21 Dec 2022 09:12:17 +0000 (10:12 +0100)]
nvme: also return I/O command effects from nvme_command_effects
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Christoph Hellwig [Wed, 21 Dec 2022 08:51:19 +0000 (09:51 +0100)]
nvmet: don't defer passthrough commands with trivial effects to the workqueue
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes:
c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Christoph Hellwig [Mon, 12 Dec 2022 14:20:56 +0000 (15:20 +0100)]
nvmet: set the LBCC bit for commands that modify data
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes:
b5d0b38c0475 ("nvmet: add Command Set Identifier support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Christoph Hellwig [Mon, 12 Dec 2022 14:20:04 +0000 (15:20 +0100)]
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Christoph Hellwig [Wed, 21 Dec 2022 09:30:45 +0000 (10:30 +0100)]
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.
Fixes:
84fef62d135b ("nvme: check admin passthru command effects")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Christoph Hellwig [Mon, 12 Dec 2022 10:09:55 +0000 (11:09 +0100)]
docs, nvme: add a feature and quirk policy document
This adds a document about what specification features are supported by
the Linux NVMe driver, and what qualifies for a quirk if an implementation
has problems following the specification.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Takashi Iwai [Wed, 28 Dec 2022 12:57:14 +0000 (13:57 +0100)]
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.
The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream. This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters. OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.
Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case. This may change the PCM stream assignment and
confuse users as well.
This patch fixes those problems by:
- Introducing a flag spec->static_pcm_mapping, and if it's set, the
driver applies the static mapping between pins and converters at the
probe time
- Limiting the number of PCM streams per pins, too; this avoids the
superfluous PCM streams
Fixes:
ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Paolo Bonzini [Wed, 28 Dec 2022 11:26:36 +0000 (06:26 -0500)]
Merge branch 'kvm-late-6.1-fixes' into HEAD
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
Paolo Bonzini [Wed, 30 Nov 2022 18:11:47 +0000 (13:11 -0500)]
KVM: selftests: restore special vmmcall code layout needed by the harness
Commit
8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes:
8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()"
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221130181147.9911-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 28 Dec 2022 11:00:22 +0000 (06:00 -0500)]
Documentation: kvm: clarify SRCU locking order
Currently only the locking order of SRCU vs kvm->slots_arch_lock
and kvm->slots_lock is documented. Extend this to kvm->lock
since Xen emulation got it terribly wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 28 Dec 2022 10:33:41 +0000 (05:33 -0500)]
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Metzmacher [Wed, 16 Nov 2022 20:25:24 +0000 (21:25 +0100)]
uapi:io_uring.h: allow linux/time_types.h to be skipped
include/uapi/linux/io_uring.h is synced 1:1 into
liburing:src/include/liburing/io_uring.h.
liburing has a configure check to detect the need for
linux/time_types.h. It can opt-out by defining
UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
Fixes:
78a861b94959 ("io_uring: add sync cancelation API through io_uring_register()")
Link: https://github.com/axboe/liburing/issues/708
Link: https://github.com/axboe/liburing/pull/709
Link: https://lore.kernel.org/io-uring/20221115212614.1308132-1-ammar.faizi@intel.com/T/#m9f5dd571cd4f6a5dee84452dbbca3b92ba7a4091
CC: Jens Axboe <axboe@kernel.dk>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://lore.kernel.org/r/7071a0a1d751221538b20b63f9160094fc7e06f4.1668630247.git.metze@samba.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mathieu Desnoyers [Wed, 14 Dec 2022 22:20:08 +0000 (17:20 -0500)]
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
In a scenario where kcalloc() fails to allocate memory, the futex_waitv
system call immediately returns -ENOMEM without invoking
destroy_hrtimer_on_stack(). When CONFIG_DEBUG_OBJECTS_TIMERS=y, this
results in leaking a timer debug object.
Fixes:
bf69bad38cf6 ("futex: Implement sys_futex_waitv()")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org # v5.16+
Link: https://lore.kernel.org/r/20221214222008.200393-1-mathieu.desnoyers@efficios.com
Masami Hiramatsu (Google) [Mon, 19 Dec 2022 14:35:19 +0000 (23:35 +0900)]
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after function return, kprobe jump optimization
always fails on the functions with such INT3 inside the function body.
(It already checks the INT3 padding between functions, but not inside
the function)
To avoid this issue, as same as kprobes, check whether the INT3 comes
from kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes:
e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
Masami Hiramatsu (Google) [Mon, 19 Dec 2022 14:35:10 +0000 (23:35 +0900)]
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after RET instruction, kprobes always failes to
check the probed instruction boundary by decoding the function body if
the probed address is after such sequence. (Note that some conditional
code blocks will be placed after function return, if compiler decides
it is not on the hot path.)
This is because kprobes expects kgdb puts the INT3 as a software
breakpoint and it will replace the original instruction.
But these INT3 are not such purpose, it doesn't need to recover the
original instruction.
To avoid this issue, kprobes checks whether the INT3 is owned by
kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes:
e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
Arnd Bergmann [Thu, 15 Dec 2022 16:43:23 +0000 (17:43 +0100)]
x86/calldepth: Fix incorrect init section references
The addition of callthunks_translate_call_dest means that
skip_addr() and patch_dest() can no longer be discarded
as part of the __init section freeing:
WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> skip_addr (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> patch_dest (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: is_callthunk.cold (section: .text.unlikely) -> skip_addr (section: .init.text)
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
Fixes:
b2e9dfe54be4 ("x86/bpf: Emit call depth accounting if required")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221215164334.968863-1-arnd@kernel.org
Namhyung Kim [Tue, 20 Dec 2022 22:31:40 +0000 (14:31 -0800)]
perf/core: Call LSM hook after copying perf_event_attr
It passes the attr struct to the security_perf_event_open() but it's
not initialized yet.
Fixes:
da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221220223140.4020470-1-namhyung@kernel.org
Peter Zijlstra [Mon, 19 Dec 2022 14:40:04 +0000 (15:40 +0100)]
perf: Fix use-after-free in error path
The syscall error path has a use-after-free; put_pmu_ctx() will
reference ctx, therefore we must ensure ctx is destroyed after pmu_ctx
is.
Fixes:
bd2756811766 ("perf: Rewrite core context handling")
Reported-by: syzbot+b8e8c01c8ade4fe6e48f@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lkml.kernel.org/r/Y6B3xEgkbmFUCeni@hirez.programming.kicks-ass.net
Colin Ian King [Fri, 2 Dec 2022 13:51:49 +0000 (13:51 +0000)]
perf/x86/amd: fix potential integer overflow on shift of a int
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then passed as a 64 bit function argument. In the case where
i is 32 or more this can lead to an overflow. Avoid this by shifting
using the BIT_ULL macro instead.
Fixes:
471af006a747 ("perf/x86/amd: Constrain Large Increment per Cycle events")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20221202135149.1797974-1-colin.i.king@gmail.com
Chengming Zhou [Wed, 7 Dec 2022 12:40:23 +0000 (20:40 +0800)]
perf/core: Fix cgroup events tracking
We encounter perf warnings when using cgroup events like:
cd /sys/fs/cgroup
mkdir test
perf stat -e cycles -a -G test
Which then triggers:
WARNING: CPU: 0 PID: 690 at kernel/events/core.c:849 perf_cgroup_switch+0xb2/0xc0
Call Trace:
<TASK>
__schedule+0x4ae/0x9f0
? _raw_spin_unlock_irqrestore+0x23/0x40
? __cond_resched+0x18/0x20
preempt_schedule_common+0x2d/0x70
__cond_resched+0x18/0x20
wait_for_completion+0x2f/0x160
? cpu_stop_queue_work+0x9e/0x130
affine_move_task+0x18a/0x4f0
WARNING: CPU: 0 PID: 690 at kernel/events/core.c:829 ctx_sched_in+0x1cf/0x1e0
Call Trace:
<TASK>
? ctx_sched_out+0xb7/0x1b0
perf_cgroup_switch+0x88/0xc0
__schedule+0x4ae/0x9f0
? _raw_spin_unlock_irqrestore+0x23/0x40
? __cond_resched+0x18/0x20
preempt_schedule_common+0x2d/0x70
__cond_resched+0x18/0x20
wait_for_completion+0x2f/0x160
? cpu_stop_queue_work+0x9e/0x130
affine_move_task+0x18a/0x4f0
The above two warnings are not complete here since I remove other
unimportant information. The problem is caused by the perf cgroup
events tracking:
CPU0 CPU1
perf_event_open()
perf_event_alloc()
account_event()
account_event_cpu()
atomic_inc(perf_cgroup_events)
__perf_event_task_sched_out()
if (atomic_read(perf_cgroup_events))
perf_cgroup_switch()
// kernel/events/core.c:849
WARN_ON_ONCE(cpuctx->ctx.nr_cgroups == 0)
if (READ_ONCE(cpuctx->cgrp) == cgrp) // false
return
perf_ctx_lock()
ctx_sched_out()
cpuctx->cgrp = cgrp
ctx_sched_in()
perf_cgroup_set_timestamp()
// kernel/events/core.c:829
WARN_ON_ONCE(!ctx->nr_cgroups)
perf_ctx_unlock()
perf_install_in_context()
cpu_function_call()
__perf_install_in_context()
add_event_to_ctx()
list_add_event()
perf_cgroup_event_enable()
ctx->nr_cgroups++
cpuctx->cgrp = X
We can see from above that we wrongly use percpu atomic perf_cgroup_events
to check if we need to perf_cgroup_switch(), which should only be used
when we know this CPU has cgroup events enabled.
The commit
bd2756811766 ("perf: Rewrite core context handling") change
to have only one context per-CPU, so we can just use cpuctx->cgrp to
check if this CPU has cgroup events enabled.
So percpu atomic perf_cgroup_events is not needed.
Fixes:
bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20221207124023.66252-1-zhouchengming@bytedance.com
Ravi Bangoria [Fri, 18 Nov 2022 05:15:39 +0000 (10:45 +0530)]
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
inherit_event() returns NULL only when it finds orphaned events
otherwise it returns either valid child_event pointer or an error
pointer. Follow the same when it fails to find pmu_ctx.
Fixes:
bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221118051539.820-1-ravi.bangoria@amd.com
David Woodhouse [Mon, 26 Dec 2022 12:03:20 +0000 (12:03 +0000)]
KVM: x86/xen: Documentation updates and clarifications
Most notably, the KVM_XEN_EVTCHN_RESET feature had escaped documentation
entirely. Along with how to turn most stuff off on SHUTDOWN_soft_reset.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <
20221226120320.
1125390-6-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Mon, 26 Dec 2022 12:03:19 +0000 (12:03 +0000)]
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
These are (uint64_t)-1 magic values are a userspace ABI, allowing the
shared info pages and other enlightenments to be disabled. This isn't
a Xen ABI because Xen doesn't let the guest turn these off except with
the full SHUTDOWN_soft_reset mechanism. Under KVM, the userspace VMM is
expected to handle soft reset, and tear down the kernel parts of the
enlightenments accordingly.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <
20221226120320.
1125390-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michal Luczaj [Mon, 26 Dec 2022 12:03:18 +0000 (12:03 +0000)]
KVM: x86/xen: Simplify eventfd IOCTLs
Port number is validated in kvm_xen_setattr_evtchn().
Remove superfluous checks in kvm_xen_eventfd_assign() and
kvm_xen_eventfd_update().
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <
20221222203021.
1944101-3-mhal@rbox.co>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <
20221226120320.
1125390-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 26 Dec 2022 12:03:17 +0000 (12:03 +0000)]
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
The evtchnfd structure itself must be protected by either kvm->lock or
SRCU. Use the former in kvm_xen_eventfd_update(), since the lock is
being taken anyway; kvm_xen_hcall_evtchn_send() instead is a reader and
does not need kvm->lock, and is called in SRCU critical section from the
kvm_x86_handle_exit function.
It is also important to use rcu_read_{lock,unlock}() in
kvm_xen_hcall_evtchn_send(), because idr_remove() will *not*
use synchronize_srcu() to wait for readers to complete.
Remove a superfluous if (kvm) check before calling synchronize_srcu()
in kvm_xen_eventfd_deassign() where kvm has been dereferenced already.
Co-developed-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <
20221226120320.
1125390-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Mon, 26 Dec 2022 12:03:16 +0000 (12:03 +0000)]
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
In particular, we shouldn't assume that being contiguous in guest virtual
address space means being contiguous in guest *physical* address space.
In dropping the manual calls to kvm_mmu_gva_to_gpa_system(), also drop
the srcu_read_lock() that was around them. All call sites are reached
from kvm_xen_hypercall() which is called from the handle_exit function
with the read lock already held.
536395260 ("KVM: x86/xen: handle PV timers oneshot mode")
1a65105a5 ("KVM: x86/xen: handle PV spinlocks slowpath")
Fixes:
2fd6df2f2 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <
20221226120320.
1125390-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michal Luczaj [Mon, 26 Dec 2022 12:03:15 +0000 (12:03 +0000)]
KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
Release page irrespectively of kvm_vcpu_write_guest() return value.
Suggested-by: Paul Durrant <paul@xen.org>
Fixes:
23200b7a30de ("KVM: x86/xen: intercept xen hypercalls if enabled")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <
20221220151454.712165-1-mhal@rbox.co>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <
20221226120320.
1125390-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 7 Dec 2022 00:36:37 +0000 (00:36 +0000)]
KVM: Delete extra block of "};" in the KVM API documentation
Delete an extra block of code/documentation that snuck in when KVM's
documentation was converted to ReST format.
Fixes:
106ee47dc633 ("docs: kvm: Convert api.txt to ReST format")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221207003637.
2041211-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Wed, 7 Dec 2022 12:05:05 +0000 (20:05 +0800)]
kvm: x86/mmu: Remove duplicated "be split" in spte.h
"be split be split" -> "be split"
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <
20221207120505.9175-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Wed, 7 Dec 2022 12:06:16 +0000 (20:06 +0800)]
kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
No code is using KVM_MMU_READ_LOCK() or KVM_MMU_READ_UNLOCK(). They
used to be in virt/kvm/pfncache.c:
KVM_MMU_READ_LOCK(kvm);
retry = mmu_notifier_retry_hva(kvm, mmu_seq, uhva);
KVM_MMU_READ_UNLOCK(kvm);
However, since
58cd407ca4c6 ("KVM: Fix multiple races in gfn=>pfn cache
refresh", 2022-05-25) the code is only relying on the MMU notifier's
invalidation count and sequence number.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <
20221207120617.9409-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lukas Bulwahn [Mon, 5 Dec 2022 08:20:44 +0000 (09:20 +0100)]
MAINTAINERS: adjust entry after renaming the vmx hyperv files
Commit
a789aeba4196 ("KVM: VMX: Rename "vmx/evmcs.{ch}" to
"vmx/hyperv.{ch}"") renames the VMX specific Hyper-V files, but does not
adjust the entry in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in KVM X86 HYPER-V (KVM/hyper-v).
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes:
a789aeba4196 ("KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}"")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221205082044.10141-1-lukas.bulwahn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Fri, 9 Dec 2022 01:53:02 +0000 (01:53 +0000)]
KVM: selftests: Mark correct page as mapped in virt_map()
The loop marks vaddr as mapped after incrementing it by page size,
thereby marking the *next* page as mapped. Set the bit in vpages_mapped
first instead.
Fixes:
56fc7732031d ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <
20221209015307.
1781352-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Fri, 9 Dec 2022 01:53:04 +0000 (01:53 +0000)]
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
Currently the ucall MMIO hole is placed immediately after slot0, which
is a relatively safe address in the PA space. However, it is possible
that the same address has already been used for something else (like the
guest program image) in the VA space. At least in my own testing,
building the vgic_irq test with clang leads to the MMIO hole appearing
underneath gicv3_ops.
Stop identity mapping the MMIO hole and instead find an unused VA to map
to it. Yet another subtle detail of the KVM selftests library is that
virt_pg_map() does not update vm->vpages_mapped. Switch over to
virt_map() instead to guarantee that the chosen VA isn't to something
else.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <
20221209015307.
1781352-6-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Dec 2022 10:36:53 +0000 (05:36 -0500)]
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap.
These correspond to the "canonical addresses" of x86 and other
architectures, but that is not obvious.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 9 Dec 2022 20:55:44 +0000 (12:55 -0800)]
KVM: selftests: Use magic value to signal ucall_alloc() failure
Use a magic value to signal a ucall_alloc() failure instead of simply
doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a
failure puts the guest into an infinite loop.
Use -1 as the magic value, as a real ucall struct should never wrap.
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>