OSDN Git Service
Richard Cochran [Thu, 14 Nov 2019 18:45:04 +0000 (10:45 -0800)]
dp83640: Reject requests to enable time stamping on both edges.
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:03 +0000 (10:45 -0800)]
mv88e6xxx: Reject requests to enable time stamping on both edges.
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:02 +0000 (10:45 -0800)]
ptp: Introduce strict checking of external time stamp options.
User space may request time stamps on rising edges, falling edges, or
both. However, the particular mode may or may not be supported in the
hardware or in the driver. This patch adds a "strict" flag that tells
drivers to ensure that the requested mode will be honored.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:45:01 +0000 (10:45 -0800)]
renesas: reject unsupported external timestamp flags
Fix the renesas PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:45:00 +0000 (10:45 -0800)]
mlx5: reject unsupported external timestamp flags
Fix the mlx5 core PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
[ RC: I'm not 100% sure what this driver does, but if I'm not wrong it
follows the dp83640:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge
]
Cc: Feras Daoud <ferasda@mellanox.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:59 +0000 (10:44 -0800)]
igb: reject unsupported external timestamp flags
Fix the igb PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
This HW always time stamps both edges:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp both edges
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:58 +0000 (10:44 -0800)]
dp83640: reject unsupported external timestamp flags
Fix the dp83640 PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
For the record, the semantics of this driver are:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge
Cc: Stefan Sørensen <stefan.sorensen@spectralink.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:57 +0000 (10:44 -0800)]
mv88e6xxx: reject unsupported external timestamp flags
Fix the mv88e6xxx PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
For the record, the semantics of this driver are:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp rising edge
Cc: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:56 +0000 (10:44 -0800)]
net: reject PTP periodic output requests with unsupported flags
Commit
823eb2a3c4c7 ("PTP: add support for one-shot output") introduced
a new flag for the PTP periodic output request ioctl. This flag is not
currently supported by any driver.
Fix all drivers which implement the periodic output request ioctl to
explicitly reject any request with flags they do not understand. This
ensures that the driver does not accidentally misinterpret the
PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future.
This is important for forward compatibility: if a new flag is
introduced, the driver should reject requests to enable the flag until
the driver has actually been modified to support the flag in question.
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Christopher Hall <christopher.s.hall@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:44:55 +0000 (10:44 -0800)]
ptp: Validate requests to enable time stamping of external signals.
Commit
415606588c61 ("PTP: introduce new versions of IOCTLs")
introduced a new external time stamp ioctl that validates the flags.
This patch extends the validation to ensure that at least one rising
or falling edge flag is set when enabling external time stamps.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chuhong Yuan [Thu, 14 Nov 2019 15:43:24 +0000 (23:43 +0800)]
net: ep93xx_eth: fix mismatch of request_mem_region in remove
The driver calls release_resource in remove to match request_mem_region
in probe, which is incorrect.
Fix it by using the right one, release_mem_region.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Thu, 14 Nov 2019 10:16:01 +0000 (11:16 +0100)]
ax88172a: fix information leak on short answers
If a malicious device gives a short MAC it can elicit up to
5 bytes of leaked memory out of the driver. We need to check for
ETH_ALEN instead.
Reported-by: syzbot+a8d4acdad35e6bbca308@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 14 Nov 2019 09:50:57 +0000 (11:50 +0200)]
selftests: mlxsw: Adjust test to recent changes
mlxsw does not support VXLAN devices with a physical device attached and
vetoes such configurations upon enslavement to an offloaded bridge.
Commit
0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
changed the VXLAN device to be an upper of the physical device which
causes mlxsw to veto the creation of the VXLAN device with "Unknown
upper device type".
This is OK as this configuration is not supported, but it prevents us
from testing bad flows involving the enslavement of VXLAN devices with a
physical device to a bridge, regardless if the physical device is an
mlxsw netdev or not.
Adjust the test to use a dummy device as a physical device instead of a
mlxsw netdev.
Fixes:
0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Nov 2019 02:06:34 +0000 (18:06 -0800)]
Merge branch 'hns3-fixes'
Huazhong Tan says:
====================
net: hns3: fixes for -net
This series includes misc fixes for the HNS3 ethernet driver.
[patch 1/3] adds a compatible handling for configuration of
MAC VLAN swithch parameter.
[patch 2/3] re-allocates SSU buffer when pfc_en changed.
[patch 3/3] fixes a bug for ETS bandwidth validation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 14 Nov 2019 02:32:41 +0000 (10:32 +0800)]
net: hns3: fix ETS bandwidth validation bug
Some device only support 4 TCs, but the driver check the total
bandwidth of 8 TCs, so may cause wrong configurations write to
the hw.
This patch uses hdev->tc_max to instead HNAE3_MAX_TC to fix it.
Fixes:
e432abfb99e5 ("net: hns3: add common validation in hclge_dcb")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Thu, 14 Nov 2019 02:32:40 +0000 (10:32 +0800)]
net: hns3: reallocate SSU' buffer size when pfc_en changes
When a TC's PFC is disabled or enabled, the RX private buffer for
this TC need to be changed too, otherwise this may cause packet
dropped problem.
This patch fixes it by calling hclge_buffer_alloc to reallocate
buffer when pfc_en changes.
Fixes:
cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 14 Nov 2019 02:32:39 +0000 (10:32 +0800)]
net: hns3: add compatible handling for MAC VLAN switch parameter configuration
Previously, hns3 driver just directly send specific setting bit
and mask bits of MAC VLAN switch parameter to the firmware, it
can not be compatible with the old firmware, because the old one
ignores mask bits and covers all bits with new setting bits.
So when running with old firmware, the communication between PF
and VF will fail after resetting or configuring spoof check, since
they will do the MAC VLAN switch parameter configuration.
This patch fixes this problem by reading switch parameter firstly,
then just modifies the corresponding bit and sends it to firmware.
Fixes:
dd2956eab104 ("net: hns3: not allow SSU loopback while execute ethtool -t dev")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ulrich Hecht [Thu, 14 Nov 2019 01:49:49 +0000 (02:49 +0100)]
ravb: implement MTU change while device is up
Pre-allocates buffers sufficient for the maximum supported MTU (2026) in
order to eliminate the possibility of resource exhaustion when changing the
MTU while the device is up.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Bennett [Wed, 13 Nov 2019 23:20:03 +0000 (12:20 +1300)]
tipc: add back tipc prefix to log messages
The tipc prefix for log messages generated by tipc was
removed in commit
07f6c4bc048a ("tipc: convert tipc reference
table to use generic rhashtable").
This is still a useful prefix so add it back.
Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 14 Nov 2019 09:50:52 +0000 (01:50 -0800)]
Merge tag 'linux-can-fixes-for-5.4-
20191114' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-11-14
here another pull request for net/master consisting of one patch (including my S-o-b).
Jouni Hogander's patch fixes a memory leak found by the syzbot in the slcan
driver's error path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 14 Nov 2019 09:50:10 +0000 (01:50 -0800)]
Merge tag 'wireless-drivers-2019-11-14' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.4
Hopefully last fixes for v5.4, only one iwlwifi fix this time.
iwlwifi
* fix A-MSDU data corruption when using CCMP/GCMP ciphers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jouni Hogander [Wed, 13 Nov 2019 10:08:01 +0000 (12:08 +0200)]
slcan: Fix memory leak in error path
This patch is fixing memory leak reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
comm "syz-executor043", pid 454, jiffies
4294759719 (age 11.930s)
hex dump (first 32 bytes):
73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000a06eec0d>] __kmalloc+0x18b/0x2c0
[<
0000000083306e66>] kvmalloc_node+0x3a/0xc0
[<
000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
[<
0000000061a996c9>] slcan_open+0x3ae/0x9a0
[<
000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
[<
0000000019289631>] tty_set_ldisc+0x28c/0x5f0
[<
000000004de5a617>] tty_ioctl+0x48d/0x1590
[<
00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
[<
0000000059068dbc>] ksys_ioctl+0x99/0xb0
[<
000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
[<
0000000053d0332e>] do_syscall_64+0x16f/0x580
[<
0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<
000000008ea75434>] 0xffffffffffffffff
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dan Carpenter [Wed, 13 Nov 2019 18:28:31 +0000 (21:28 +0300)]
net: cdc_ncm: Signedness bug in cdc_ncm_set_dgram_size()
This code is supposed to test for negative error codes and partial
reads, but because sizeof() is size_t (unsigned) type then negative
error codes are type promoted to high positive values and the condition
doesn't work as expected.
Fixes:
332f989a3b00 ("CDC-NCM: handle incomplete transfer of MTU")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jouni Hogander [Wed, 13 Nov 2019 11:45:02 +0000 (13:45 +0200)]
slip: Fix memory leak in slip_open error path
Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected
by Syzkaller in slcan. Same issue exists in slip.c and this patch is
addressing the leak in slip.c.
Here is the slcan memory leak trace reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
comm "syz-executor043", pid 454, jiffies
4294759719 (age 11.930s)
hex dump (first 32 bytes):
73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000a06eec0d>] __kmalloc+0x18b/0x2c0
[<
0000000083306e66>] kvmalloc_node+0x3a/0xc0
[<
000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
[<
0000000061a996c9>] slcan_open+0x3ae/0x9a0
[<
000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
[<
0000000019289631>] tty_set_ldisc+0x28c/0x5f0
[<
000000004de5a617>] tty_ioctl+0x48d/0x1590
[<
00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
[<
0000000059068dbc>] ksys_ioctl+0x99/0xb0
[<
000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
[<
0000000053d0332e>] do_syscall_64+0x16f/0x580
[<
0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<
000000008ea75434>] 0xfffffffffffffff
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Morgado [Wed, 13 Nov 2019 10:11:10 +0000 (11:11 +0100)]
net: usb: qmi_wwan: add support for Foxconn T77W968 LTE modules
These are the Foxconn-branded variants of the Dell DW5821e modules,
same USB layout as those.
The QMI interface is exposed in USB configuration #1:
P: Vendor=0489 ProdID=e0b4 Rev=03.18
S: Manufacturer=FII
S: Product=T77W968 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Nov 2019 19:47:02 +0000 (11:47 -0800)]
Merge tag 'linux-can-fixes-for-5.4-
20191113' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-11-13
this is a pull request of 9 patches for net/master, hopefully for the v5.4
release cycle.
All nine patches are by Oleksij Rempel and fix locking and use-after-free bugs
in the j1939 stack found by the syzkaller syzbot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Nov 2019 19:26:20 +0000 (11:26 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2019-11-13
1) Fix a page memleak on xfrm state destroy.
2) Fix a refcount imbalance if a xfrm_state
gets invaild during async resumption.
From Xiaodong Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel [Fri, 8 Nov 2019 12:57:14 +0000 (13:57 +0100)]
can: j1939: warn if resources are still linked on destroy
j1939_session_destroy() and __j1939_priv_release() should be called only
if session, ecu or socket are not linked or used by any one else. If at
least one of these resources is linked, then the reference counting is
broken somewhere.
This warning will be triggered before KASAN will do, and will make it
easier to debug initial issue. This works on platforms without KASAN
support.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Sat, 9 Nov 2019 15:11:18 +0000 (16:11 +0100)]
can: j1939: j1939_can_recv(): add priv refcounting
j1939_can_recv() can be called in parallel with socket release. In this
case sk_release and sk_destruct can be done earlier than
j1939_can_recv() is processed.
Reported-by: syzbot+ca172a0ac477ac90f045@syzkaller.appspotmail.com
Reported-by: syzbot+07ca5bce8530070a5650@syzkaller.appspotmail.com
Reported-by: syzbot+a47537d3964ef6c874e1@syzkaller.appspotmail.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Fri, 8 Nov 2019 13:02:10 +0000 (14:02 +0100)]
can: j1939: transport: j1939_cancel_active_session(): use hrtimer_try_to_cancel() instead of hrtimer_cancel()
This part of the code protected by lock used in the hrtimer as well.
Using hrtimer_cancel() will trigger dead lock.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Thu, 7 Nov 2019 17:51:40 +0000 (18:51 +0100)]
can: j1939: make sure socket is held as long as session exists
We link the socket to the session to be able provide socket specific
notifications. For example messages over error queue.
We need to keep the socket held, while we have a reference to it.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Thu, 7 Nov 2019 17:46:38 +0000 (18:46 +0100)]
can: j1939: transport: make sure the aborted session will be deactivated only once
j1939_session_cancel() was modifying session->state without protecting
it by locks and without checking actual state of the session.
This patch moves j1939_tp_set_rxtimeout() into j1939_session_cancel()
and adds the missing locking.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Tue, 5 Nov 2019 13:31:58 +0000 (14:31 +0100)]
can: j1939: socket: rework socket locking for j1939_sk_release() and j1939_sk_sendmsg()
j1939_sk_sendmsg() should be protected by lock_sock() to avoid race with
j1939_sk_bind() and j1939_sk_release().
Reported-by: syzbot+afd421337a736d6c1ee6@syzkaller.appspotmail.com
Reported-by: syzbot+6d04f6a1b31a0ae12ca9@syzkaller.appspotmail.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Tue, 5 Nov 2019 10:07:08 +0000 (11:07 +0100)]
can: j1939: main: j1939_ndev_to_priv(): avoid crash if can_ml_priv is NULL
This patch avoids a NULL pointer deref crash if ndev->ml_priv is NULL.
Reported-by: syzbot+95c8e0d9dffde15b6c5c@syzkaller.appspotmail.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Thu, 7 Nov 2019 10:57:36 +0000 (11:57 +0100)]
can: j1939: move j1939_priv_put() into sk_destruct callback
This patch delays the j1939_priv_put() until the socket is destroyed via
the sk_destruct callback, to avoid use-after-free problems.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Oleksij Rempel [Thu, 7 Nov 2019 10:55:42 +0000 (11:55 +0100)]
can: af_can: export can_sock_destruct()
In j1939 we need our own struct sock::sk_destruct callback. Export the
generic af_can can_sock_destruct() that allows us to chain-call it.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Ioana Ciornei [Tue, 12 Nov 2019 16:21:52 +0000 (18:21 +0200)]
dpaa2-eth: free already allocated channels on probe defer
The setup_dpio() function tries to allocate a number of channels equal
to the number of CPUs online. When there are not enough DPCON objects
already probed, the function will return EPROBE_DEFER. When this
happens, the already allocated channels are not freed. This results in
the incapacity of properly probing the next time around.
Fix this by freeing the channels on the error path.
Fixes:
d7f5a9d89a55 ("dpaa2-eth: defer probe on object allocate")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Tue, 12 Nov 2019 15:03:41 +0000 (16:03 +0100)]
net/smc: fix refcount non-blocking connect() -part 2
If an SMC socket is immediately terminated after a non-blocking connect()
has been called, a memory leak is possible.
Due to the sock_hold move in
commit
301428ea3708 ("net/smc: fix refcounting for non-blocking connect()")
an extra sock_put() is needed in smc_connect_work(), if the internal
TCP socket is aborted and cancels the sk_stream_wait_connect() of the
connect worker.
Reported-by: syzbot+4b73ad6fc767e576e275@syzkaller.appspotmail.com
Fixes:
301428ea3708 ("net/smc: fix refcounting for non-blocking connect()")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiaodong Xu [Mon, 11 Nov 2019 23:05:46 +0000 (15:05 -0800)]
xfrm: release device reference for invalid state
An ESP packet could be decrypted in async mode if the input handler for
this packet returns -EINPROGRESS in xfrm_input(). At this moment the device
reference in skb is held. Later xfrm_input() will be invoked again to
resume the processing.
If the transform state is still valid it would continue to release the
device reference and there won't be a problem; however if the transform
state is not valid when async resumption happens, the packet will be
dropped while the device reference is still being held.
When the device is deleted for some reason and the reference to this
device is not properly released, the kernel will keep logging like:
unregister_netdevice: waiting for ppp2 to become free. Usage count = 1
The issue is observed when running IPsec traffic over a PPPoE device based
on a bridge interface. By terminating the PPPoE connection on the server
end for multiple times, the PPPoE device on the client side will eventually
get stuck on the above warning message.
This patch will check the async mode first and continue to release device
reference in async resumption, before it is dropped due to invalid state.
v2: Do not assign address family from outer_mode in the transform if the
state is invalid
v3: Release device reference in the error path instead of jumping to resume
Fixes:
4ce3dbe397d7b ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)")
Signed-off-by: Xiaodong Xu <stid.smth@gmail.com>
Reported-by: Bo Chen <chenborfc@163.com>
Tested-by: Bo Chen <chenborfc@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
YueHaibing [Mon, 11 Nov 2019 07:13:47 +0000 (15:13 +0800)]
mdio_bus: Fix PTR_ERR applied after initialization to constant
Fix coccinelle warning:
./drivers/net/phy/mdio_bus.c:67:5-12: ERROR: PTR_ERR applied after initialization to constant on line 62
./drivers/net/phy/mdio_bus.c:68:5-12: ERROR: PTR_ERR applied after initialization to constant on line 62
Fix this by using IS_ERR before PTR_ERR
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
71dd6c0dff51 ("net: phy: add support for reset-controller")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephan Gerhold [Sun, 10 Nov 2019 16:19:15 +0000 (17:19 +0100)]
NFC: nxp-nci: Fix NULL pointer dereference after I2C communication error
I2C communication errors (-EREMOTEIO) during the IRQ handler of nxp-nci
result in a NULL pointer dereference at the moment:
BUG: kernel NULL pointer dereference, address:
0000000000000000
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 355 Comm: irq/137-nxp-nci Not tainted 5.4.0-rc6 #1
RIP: 0010:skb_queue_tail+0x25/0x50
Call Trace:
nci_recv_frame+0x36/0x90 [nci]
nxp_nci_i2c_irq_thread_fn+0xd1/0x285 [nxp_nci_i2c]
? preempt_count_add+0x68/0xa0
? irq_forced_thread_fn+0x80/0x80
irq_thread_fn+0x20/0x60
irq_thread+0xee/0x180
? wake_threads_waitq+0x30/0x30
kthread+0xfb/0x130
? irq_thread_check_affinity+0xd0/0xd0
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x40
Afterward the kernel must be rebooted to work properly again.
This happens because it attempts to call nci_recv_frame() with skb == NULL.
However, unlike nxp_nci_fw_recv_frame(), nci_recv_frame() does not have any
NULL checks for skb, causing the NULL pointer dereference.
Change the code to call only nxp_nci_fw_recv_frame() in case of an error.
Make sure to log it so it is obvious that a communication error occurred.
The error above then becomes:
nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121
nci: __nci_request: wait_for_completion_interruptible_timeout failed 0
nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121
Fixes:
6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 10 Nov 2019 15:31:23 +0000 (16:31 +0100)]
mlxsw: core: Enable devlink reload only on probe
Call devlink enable only during probe time and avoid deadlock
during reload.
Reported-by: Shalom Toledo <shalomt@mellanox.com>
Fixes:
5a508a254bed ("devlink: disallow reload operation during device cleanup")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Levin [Sun, 10 Nov 2019 12:11:56 +0000 (14:11 +0200)]
devlink: Add method for time-stamp on reporter's dump
When setting the dump's time-stamp, use ktime_get_real in addition to
jiffies. This simplifies the user space implementation and bypasses
some inconsistent behavior with translating jiffies to current time.
The time taken is transformed into nsec, to comply with y2038 issue.
Fixes:
c8e1da0bf923 ("devlink: Add health report functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corentin Labbe [Sun, 10 Nov 2019 11:30:48 +0000 (11:30 +0000)]
net: ethernet: dwmac-sun8i: Use the correct function in exit path
When PHY is not powered, the probe function fail and some resource are
still unallocated.
Furthermore some BUG happens:
dwmac-sun8i
5020000.ethernet: EMAC reset timeout
------------[ cut here ]------------
kernel BUG at /linux-next/net/core/dev.c:9844!
So let's use the right function (stmmac_pltfr_remove) in the error path.
Fixes:
9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Sat, 9 Nov 2019 10:43:06 +0000 (18:43 +0800)]
tcp: remove redundant new line from tcp_event_sk_skb
This removes '\n' from trace event class tcp_event_sk_skb to avoid
redundant new blank line and make output compact.
Fixes:
af4325ecc24f ("tcp: expose sk_state in tcp_retransmit_skb tracepoint")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 9 Nov 2019 10:29:46 +0000 (11:29 +0100)]
devlink: disallow reload operation during device cleanup
There is a race between driver code that does setup/cleanup of device
and devlink reload operation that in some drivers works with the same
code. Use after free could we easily obtained by running:
while true; do
echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/bind
devlink dev reload pci/0000:00:10.0 &
echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/unbind
done
Fix this by enabling reload only after setup of device is complete and
disabling it at the beginning of the cleanup process.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes:
2d8dc5bbf4e7 ("devlink: Add support for reload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 9 Nov 2019 02:21:05 +0000 (18:21 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
Linus Torvalds [Sat, 9 Nov 2019 02:15:55 +0000 (18:15 -0800)]
Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
David S. Miller [Sat, 9 Nov 2019 00:50:14 +0000 (16:50 -0800)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-11-08
This series contains fixes to igb, igc, ixgbe, i40e, iavf and ice
drivers.
Colin Ian King fixes a potentially wrap-around counter in a for-loop.
Nick fixes the default ITR values for the iavf driver to 50 usecs
interval.
Arkadiusz fixes 'ethtool -m' for X722 devices where the correct value
cannot be obtained from the firmware, so add X722 to the check to ensure
the wrong value is not returned.
Jake fixes igb and igc drivers in their implementation of launch time
support by declaring skb->tstamp value as ktime_t instead of s64.
Magnus fixes ixgbe and i40e where the need_wakeup flag for transmit may
not be set for AF_XDP sockets that are only used to send packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:10 +0000 (20:58 +0100)]
ixgbe: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:09 +0000 (20:58 +0100)]
i40e: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 6 Nov 2019 17:18:23 +0000 (09:18 -0800)]
igb/igc: use ktime accessors for skb->tstamp
When implementing launch time support in the igb and igc drivers, the
skb->tstamp value is assumed to be a s64, but it's declared as a ktime_t
value.
Although ktime_t is typedef'd to s64 it wasn't always, and the kernel
provides accessors for ktime_t values.
Use the ktime_to_timespec64 and ktime_set accessors instead of directly
assuming that the variable is always an s64.
This improves portability if the code is ever moved to another kernel
version, or if the definition of ktime_t ever changes again in the
future.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Arkadiusz Kubalewski [Wed, 6 Nov 2019 14:24:04 +0000 (06:24 -0800)]
i40e: Fix for ethtool -m issue on X722 NIC
This patch contains fix for a problem with command:
'ethtool -m <dev>'
which breaks functionality of:
'ethtool <dev>'
when called on X722 NIC
Disallowed update of link phy_types on X722 NIC
Currently correct value cannot be obtained from FW
Previously wrong value returned by FW was used and was
a root cause for incorrect output of 'ethtool <dev>' command
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Nicholas Nunley [Tue, 5 Nov 2019 12:22:14 +0000 (04:22 -0800)]
iavf: initialize ITRN registers with correct values
Since commit
92418fb14750 ("i40e/i40evf: Use usec value instead of reg
value for ITR defines") the driver tracks the interrupt throttling
intervals in single usec units, although the actual ITRN registers are
programmed in 2 usec units. Most register programming flows in the driver
correctly handle the conversion, although it is currently not applied when
the registers are initialized to their default values. Most of the time
this doesn't present a problem since the default values are usually
immediately overwritten through the standard adaptive throttling mechanism,
or updated manually by the user, but if adaptive throttling is disabled and
the interval values are left alone then the incorrect value will persist.
Since the intended default interval of 50 usecs (vs. 100 usecs as
programmed) performs better for most traffic workloads, this can lead to
performance regressions.
This patch adds the correct conversion when writing the initial values to
the ITRN registers.
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Colin Ian King [Fri, 1 Nov 2019 14:00:17 +0000 (14:00 +0000)]
ice: fix potential infinite loop because loop counter being too small
Currently the for-loop counter i is a u8 however it is being checked
against a maximum value hw->num_tx_sched_layers which is a u16. Hence
there is a potential wrap-around of counter i back to zero if
hw->num_tx_sched_layers is greater than 255. Fix this by making i
a u16.
Addresses-Coverity: ("Infinite loop")
Fixes:
b36c598c999c ("ice: Updates to Tx scheduler code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Manish Chopra [Fri, 8 Nov 2019 10:42:30 +0000 (02:42 -0800)]
qede: fix NULL pointer deref in __qede_remove()
While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())
This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.
[ 194.360134] BUG: unable to handle kernel NULL pointer dereference at
00000000000008dc
[ 194.360227] IP: [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.360304] PGD 0
[ 194.360325] Oops: 0000 [#1] SMP
[ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[ 194.361412] task:
ffff9cea9b360000 ti:
ffff9ceabebdc000 task.ti:
ffff9ceabebdc000
[ 194.361463] RIP: 0010:[<
ffffffffc03553c4>] [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.361534] RSP: 0018:
ffff9ceabebdfac0 EFLAGS:
00010282
[ 194.361570] RAX:
0000000000000000 RBX:
ffff9cd013846098 RCX:
0000000000000000
[ 194.361621] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff9cd013846098
[ 194.361668] RBP:
ffff9ceabebdfae8 R08:
0000000000000000 R09:
0000000000000000
[ 194.361715] R10:
00000000bfe14201 R11:
ffff9ceabfe141e0 R12:
0000000000000000
[ 194.361762] R13:
ffff9cd013846098 R14:
0000000000000000 R15:
ffff9ceab5e48000
[ 194.361810] FS:
00007f799c02d880(0000) GS:
ffff9ceacb0c0000(0000) knlGS:
0000000000000000
[ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 194.361903] CR2:
00000000000008dc CR3:
0000001bdac76000 CR4:
00000000007607e0
[ 194.361953] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 194.362002] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 194.362051] PKRU:
55555554
[ 194.362073] Call Trace:
[ 194.362109] [<
ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[ 194.362180] [<
ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[ 194.362240] [<
ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[ 194.362285] [<
ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[ 194.362343] [<
ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[ 194.362388] [<
ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[ 194.362450] [<
ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[ 194.362496] [<
ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[ 194.362534] [<
ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[ 194.362599] [<
ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[ 194.362658] [<
ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362709] [<
ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[ 194.362754] [<
ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362803] [<
ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[ 194.362854] [<
ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[ 194.362904] [<
ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[ 194.362956] [<
ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[ 194.363010] [<
ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[ 194.363066] [<
ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[ 194.363107] [<
ffffffffb94b66e2>] kernel_restart+0x12/0x60
[ 194.363146] [<
ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[ 194.363196] [<
ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[ 194.363253] [<
ffffffffb942b621>] ? __switch_to+0x151/0x580
[ 194.363304] [<
ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[ 194.363343] [<
ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[ 194.363387] [<
ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[ 194.363712] RIP [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.363764] RSP <
ffff9ceabebdfac0>
[ 194.363791] CR2:
00000000000008dc
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 8 Nov 2019 04:08:19 +0000 (20:08 -0800)]
net: fix data-race in neigh_event_send()
KCSAN reported the following data-race [1]
The fix will also prevent the compiler from optimizing out
the condition.
[1]
BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output
write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1:
neigh_event_send include/net/neighbour.h:443 [inline]
neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618
read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0:
neigh_event_send include/net/neighbour.h:442 [inline]
neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 8 Nov 2019 21:42:40 +0000 (13:42 -0800)]
Merge tag 'pwm/for-5.4-rc7' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"One more fix to keep a reference to the driver's module as long as
there are users of the PWM exposed by the driver"
* tag 'pwm/for-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: Prevent unloading the driver module while in use
Tejun Heo [Fri, 8 Nov 2019 20:18:29 +0000 (12:18 -0800)]
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead. This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).
Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups. When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.
While
c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages. However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.
Skip the immediate switching if the associated memcg is dying.
This is a simplified version of the following two patches:
* https://lore.kernel.org/linux-mm/
20190513183053.GA73423@dennisz-mbp/
* http://lkml.kernel.org/r/
156355839560.2063.
5265687291430814589.stgit@buzz
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes:
e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 8 Nov 2019 20:31:27 +0000 (12:31 -0800)]
Merge tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Some late-breaking dentry handling fixes from Al and Jeff, a patch to
further restrict copy_file_range() to avoid potential data corruption
from Luis and a fix for !CONFIG_CEPH_FSCACHE kernels.
Everything but the fscache fix is marked for stable"
* tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client:
ceph: return -EINVAL if given fsc mount option on kernel w/o support
ceph: don't allow copy_file_range when stripe_count != 1
ceph: don't try to handle hashed dentries in non-O_CREAT atomic_open
ceph: add missing check in d_revalidate snapdir handling
ceph: fix RCU case handling in ceph_d_revalidate()
ceph: fix use-after-free in __ceph_remove_cap()
Stefano Garzarella [Fri, 8 Nov 2019 16:08:50 +0000 (17:08 +0100)]
vsock/virtio: fix sock refcnt holding during the shutdown
The "
42f5cda5eaf4" commit rightly set SOCK_DONE on peer shutdown,
but there is an issue if we receive the SHUTDOWN(RDWR) while the
virtio_transport_close_timeout() is scheduled.
In this case, when the timeout fires, the SOCK_DONE is already
set and the virtio_transport_close_timeout() will not call
virtio_transport_reset() and virtio_transport_do_close().
This causes that both sockets remain open and will never be released,
preventing the unloading of [virtio|vhost]_transport modules.
This patch fixes this issue, calling virtio_transport_reset() and
virtio_transport_do_close() when we receive the SHUTDOWN(RDWR)
and there is nothing left to read.
Fixes:
42f5cda5eaf4 ("vsock/virtio: set SOCK_DONE on peer shutdown")
Cc: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Nov 2019 19:37:24 +0000 (11:37 -0800)]
Merge tag 'mac80211-for-net-2019-11-08' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Three small fixes:
* we hit a failure path bug related to
ieee80211_txq_setup_flows()
* also use kvmalloc() to make that less likely
* fix a timing value shortly after boot (during
INITIAL_JIFFIES)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mordechay Goodstein [Thu, 7 Nov 2019 11:51:47 +0000 (13:51 +0200)]
iwlwifi: pcie: don't consider IV len in A-MSDU
From gen2 PN is totally offloaded to hardware (also the space for the
IV isn't part of the skb). As you can see in mvm/mac80211.c:3545, the
MAC for cipher types CCMP/GCMP doesn't set
IEEE80211_KEY_FLAG_PUT_IV_SPACE for gen2 NICs.
This causes all the AMSDU data to be corrupted with cipher enabled.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Alexander Sverdlin [Fri, 8 Nov 2019 10:00:44 +0000 (10:00 +0000)]
net: ethernet: octeon_mgmt: Account for second possible VLAN header
Octeon's input ring-buffer entry has 14 bits-wide size field, so to account
for second possible VLAN header max_mtu must be further reduced.
Fixes:
109cc16526c6d ("ethernet/cavium: use core min/max MTU checking")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 8 Nov 2019 17:48:19 +0000 (09:48 -0800)]
Merge tag 'modules-for-v5.4-rc7' of git://git./linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix `make nsdeps` for modules composed of multiple source files.
Since $mod_source_files was not in quotes in the call to
generate_deps_for_ns(), not all the source files for a module were
being passed to spatch"
* tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: make sure to pass all module source files to spatch
Linus Torvalds [Fri, 8 Nov 2019 17:43:34 +0000 (09:43 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"Fix pte_same() to avoid getting stuck on write fault.
This single arm64 fix is a revert of
747a70e60b72 ("arm64: Fix
copy-on-write referencing in HugeTLB"), not because that patch was
wrong, but because it was broken by
aa57157be69f ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default") which we merged in
-rc6.
We spotted the issue in Android (AOSP), where one of the JIT threads
gets stuck on a write fault during boot because the faulting pte is
marked as PTE_DIRTY | PTE_WRITE | PTE_RDONLY and the fault handler
decides that there's nothing to do thanks to pte_same() masking out
PTE_RDONLY.
Thanks to John Stultz for reporting this and testing this so quickly,
and to Steve Capper for confirming that the HugeTLB tests continue to
pass"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Do not mask out PTE_RDONLY in pte_same()
Uwe Kleine-König [Thu, 17 Oct 2019 19:22:18 +0000 (21:22 +0200)]
pwm: bcm-iproc: Prevent unloading the driver module while in use
The owner member of struct pwm_ops must be set to THIS_MODULE to
increase the reference count of the module such that the module cannot
be removed while its code is in use.
Fixes:
daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Linus Torvalds [Fri, 8 Nov 2019 16:46:49 +0000 (08:46 -0800)]
Merge tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
"These all fix various bugs, some of which people have tripped over and
some of which have been caught by automatic tools"
* tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax:
idr: Fix idr_alloc_u32 on 32-bit systems
idr: Fix integer overflow in idr_for_each_entry
radix tree: Remove radix_tree_iter_find
idr: Fix idr_get_next_ul race with idr_remove
XArray: Fix xas_next() with a single entry at 0
Linus Torvalds [Fri, 8 Nov 2019 16:33:32 +0000 (08:33 -0800)]
Merge tag 'pm-5.4-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix an 'unchecked MSR access' warning in the intel_pstate cpufreq
driver (Srinivas Pandruvada)"
* tag 'pm-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix invalid EPB setting
Linus Torvalds [Fri, 8 Nov 2019 16:22:19 +0000 (08:22 -0800)]
Merge tag 'sound-5.4-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It became a bit largish, but all small and good for 5.4:
- A regression fix of ALSA timer code bug that sneaked in by a recent
cleanup; never trust innocent-looking guys...
- Fix for compress API max size check signedness
- Fixes in HD-audio: CA0132 work stall, Intel Tigerlake HDMI
- A few fixes for SOF: memory leak, sanity-check and build fixes
- A collection of device-specific fixes: firewire, rockchip, ASoC
HDMI, rsnd, ASoC HDA, stm32, TI, kirkwood, msm, max98373"
* tag 'sound-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix incorrectly assigned timer instance
ASoC: SOF: topology: Fix bytes control size checks
ALSA: hda: hdmi - add Tigerlake support
ASoC: max98373: replace gpio_request with devm_gpio_request
ASoC: stm32: sai: add restriction on mmap support
ALSA: hda/ca0132 - Fix possible workqueue stall
ASoC: hdac_hda: fix race in device removal
ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
ASoC: rockchip: rockchip_max98090: Enable SHDN to fix headset detection
ASoC: ti: sdma-pcm: Add back the flags parameter for non standard dma names
ASoC: SOF: ipc: Fix memory leak in sof_set_get_large_ctrl_data
ASoC: SOF: Fix memory leak in sof_dfsentry_write
ASoC: SOF: Intel: hda-stream: fix the CONFIG_ prefix missing
ASoC: kirkwood: fix device remove ordering
ASoC: rsnd: dma: fix SSI9 4/5/6/7 busif dma address
ASoC: hdmi-codec: drop mutex locking again
ASoC: kirkwood: fix external clock probe defer
ASoC: compress: fix unsigned integer overflow check
ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX
Linus Torvalds [Fri, 8 Nov 2019 16:17:22 +0000 (08:17 -0800)]
Merge tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm: amdgpu has a few but they are pretty scattered
fixes, the fbdev one is a build regression fix that we didn't want to
risk leaving out, otherwise a couple of i915, one radeon and a core
atomic fix.
core:
- add missing documentation for GEM shmem madvise helpers
- Fix for a state dereference in atomic self-refresh helpers
fbdev:
- One compilation fix for c2p fbdev helpers
amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus
radeon:
- Port an SI power fix from amdgpu
i915:
- Fix HPD poll to avoid kworker consuming a lot of cpu cycles.
- Do not use TBT type for non Type-C ports"
* tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm:
drm/radeon: fix si_enable_smc_cac() failed issue
drm/amdgpu/renoir: move gfxoff handling into gfx9 module
drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9
drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10
drm/amdgpu: register gpu instance before fan boost feature enablment
drm/amd/swSMU: fix smu workload bit map error
drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields
drm/amdgpu: add navi14 PCI ID
Revert "drm/amd/display: setting the DIG_MODE to the correct value."
drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14
drm/amdgpu: dont schedule jobs while in reset
drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZE
drm/atomic: fix self-refresh helpers crtc state dereference
drm/i915/dp: Do not switch aux to TBT mode for non-TC ports
drm/i915: Avoid HPD poll detect triggering a new detect cycle
fbdev: c2p: Fix link failure on non-inlining
Linus Torvalds [Fri, 8 Nov 2019 16:15:01 +0000 (08:15 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for various clk driver issues that happened because of code we
merged this merge window.
The Amlogic driver was missing some flags causing rates to be rounded
improperly or clk_set_rate() to fail. The Samsung driver wasn't
freeing everything on error paths and improperly saving/restoring PLL
state across suspend/resume. The at91 driver was calling msleep() too
early when scheduling hadn't started, so we put in place a quick
solution until we can handle this sort of problem in the core
framework.
There were also problems with the Allwinner driver and operator
precedence being incorrect causing subtle bugs. Finally, the TI driver
was duplicating aliases and not delaying long enough leading to some
unexpected timeouts"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
clk: ast2600: Fix enabling of clocks
clk: at91: avoid sleeping early
clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM
clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume
clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU
clk: samsung: exynos5433: Fix error paths
clk: at91: sam9x60: fix programmable clock
clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes
clk: meson: g12a: fix cpu clock rate setting
clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
Dan Carpenter [Thu, 7 Nov 2019 07:48:47 +0000 (10:48 +0300)]
block: drbd: remove a stray unlock in __drbd_send_protocol()
There are two callers of this function and they both unlock the mutex so
this ends up being a double unlock.
Fixes:
44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Srinivas Pandruvada [Thu, 31 Oct 2019 19:26:20 +0000 (12:26 -0700)]
cpufreq: intel_pstate: Fix invalid EPB setting
The max value of EPB can only be 0x0F. Attempting to set more than that
triggers an "unchecked MSR access error" warning which happens in
intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu().
However, it is not even necessary to touch the EPB from intel_pstate,
because it is restored on every CPU online by the intel_epb.c code,
so let that code do the right thing and drop the redundant (and
incorrect) EPB update from intel_pstate.
Fixes:
af3b7379e2d70 ("cpufreq: intel_pstate: Force HWP min perf before offline")
Reported-by: Qian Cai <cai@lca.pw>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ahmed Zaki [Thu, 31 Oct 2019 12:12:43 +0000 (06:12 -0600)]
mac80211: fix station inactive_time shortly after boot
In the first 5 minutes after boot (time of INITIAL_JIFFIES),
ieee80211_sta_last_active() returns zero if last_ack is zero. This
leads to "inactive time" showing jiffies_to_msecs(jiffies).
# iw wlan0 station get fc:ec:da:64:a6:dd
Station fc:ec:da:64:a6:dd (on wlan0)
inactive time:
4294894049 ms
.
.
connected time: 70 seconds
Fix by returning last_rx if last_ack == 0.
Signed-off-by: Ahmed Zaki <anzaki@gmail.com>
Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Toke Høiland-Jørgensen [Tue, 5 Nov 2019 15:57:50 +0000 (16:57 +0100)]
net/fq_impl: Switch to kvmalloc() for memory allocation
The FQ implementation used by mac80211 allocates memory using kmalloc(),
which can fail; and Johannes reported that this actually happens in
practice.
To avoid this, switch the allocation to kvmalloc() instead; this also
brings fq_impl in line with all the FQ qdiscs.
Fixes:
557fc4a09803 ("fq: add fair queuing framework")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20191105155750.547379-1-toke@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 5 Nov 2019 14:41:11 +0000 (15:41 +0100)]
mac80211: fix ieee80211_txq_setup_flows() failure path
If ieee80211_txq_setup_flows() fails, we don't clean up LED
state properly, leading to crashes later on, fix that.
Fixes:
dc8b274f0952 ("mac80211: Move up init of TXQs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20191105154110.1ccf7112ba5d.I0ba865792446d051867b33153be65ce6b063d98c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Dave Airlie [Fri, 8 Nov 2019 03:07:58 +0000 (13:07 +1000)]
Merge tag 'drm-fixes-5.4-2019-11-06' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.4-2019-11-06:
amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus
radeon:
- Port an SI power fix from amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107032241.1021217-1-alexander.deucher@amd.com
Dave Airlie [Fri, 8 Nov 2019 03:07:39 +0000 (13:07 +1000)]
Merge tag 'drm-intel-fixes-2019-11-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix HPD poll to avoid kworker consuming a lot of cpu cycles.
- Do not use TBT type for non Type-C ports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106213958.GA16525@intel.com
Dave Airlie [Fri, 8 Nov 2019 02:12:49 +0000 (12:12 +1000)]
Merge tag 'drm-misc-fixes-2019-11-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- Some new documentation for GEM shmem madvise helpers
- Fix for a state dereference in atomic self-refresh helpers
- One compilation fix for c2p fbdev helpers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107082215.GA34850@gilmour.lan
David Ahern [Thu, 7 Nov 2019 18:29:52 +0000 (18:29 +0000)]
ipv4: Fix table id reference in fib_sync_down_addr
Hendrik reported routes in the main table using source address are not
removed when the address is removed. The problem is that fib_sync_down_addr
does not account for devices in the default VRF which are associated
with the main table. Fix by updating the table id reference.
Fixes:
5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Hendrik Donner <hd@os-cillation.de>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 7 Nov 2019 17:26:19 +0000 (09:26 -0800)]
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
While looking at a syzbot KCSAN report [1], I found multiple
issues in this code :
1) fib6_nh->last_probe has an initial value of 0.
While probably okay on 64bit kernels, this causes an issue
on 32bit kernels since the time_after(jiffies, 0 + interval)
might be false ~24 days after boot (for HZ=1000)
2) The data-race found by KCSAN
I could use READ_ONCE() and WRITE_ONCE(), but we also can
take the opportunity of not piling-up too many rt6_probe_deferred()
works by using instead cmpxchg() so that only one cpu wins the race.
[1]
BUG: KCSAN: data-race in find_match / find_match
write to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 1:
rt6_probe net/ipv6/route.c:663 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x5bd/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
tcp_xmit_probe_skb+0x19b/0x1d0 net/ipv4/tcp_output.c:3735
read to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 0:
rt6_probe net/ipv6/route.c:657 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x521/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 18894 Comm: udevd Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh")
Fixes:
f547fac624be ("ipv6: rate-limit probes for neighbourless routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Thu, 7 Nov 2019 17:09:53 +0000 (17:09 +0000)]
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
This patch fixes the problem of the spin locks, originally
meant for the netpoll path of hns driver, causing deadlock in
the normal NAPI poll path. The issue happened due to the presence
of the stray leftover spin lock code related to the netpoll,
whose support was earlier removed from the HNS[1], got activated
due to enabling of NET_POLL_CONTROLLER switch.
Earlier background:
The netpoll handling code originally had this bug(as identified
by Marc Zyngier[2]) of wrong spin lock API being used which did
not disable the interrupts and hence could cause locking issues.
i.e. if the lock were first acquired in context to thread like
'ip' util and this lock if ever got later acquired again in
context to the interrupt context like TX/RX (Interrupts could
always pre-empt the lock holding task and acquire the lock again)
and hence could cause deadlock.
Proposed Solution:
1. If the netpoll was enabled in the HNS driver, which is not
right now, we could have simply used spin_[un]lock_irqsave()
2. But as netpoll is disabled, therefore, it is best to get rid
of the existing locks and stray code for now. This should
solve the problem reported by Marc.
[1] https://git.kernel.org/torvalds/c/
4bd2c03be7
[2] https://patchwork.ozlabs.org/patch/
1189139/
Fixes:
4bd2c03be707 ("net: hns: remove ndo_poll_controller")
Cc: lipeng <lipeng321@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Morgado [Thu, 7 Nov 2019 10:57:01 +0000 (11:57 +0100)]
net: usb: qmi_wwan: add support for DW5821e with eSIM support
Exactly same layout as the default DW5821e module, just a different
vid/pid.
The QMI interface is exposed in USB configuration #1:
P: Vendor=413c ProdID=81e0 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5821e-eSIM Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Thu, 7 Nov 2019 08:48:01 +0000 (09:48 +0100)]
CDC-NCM: handle incomplete transfer of MTU
A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.
V2: used sizeof as request by Alexander
Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Thu, 7 Nov 2019 06:29:50 +0000 (14:29 +0800)]
nfc: netlink: fix double device reference drop
The function nfc_put_device(dev) is called twice to drop the reference
to dev when there is no associated local llcp. Remove one of them to fix
the bug.
Fixes:
52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes:
d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 7 Nov 2019 19:54:54 +0000 (11:54 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"Two fixes for the HID subsystem:
- regression fix for i2c-hid power management (Hans de Goede)
- signed vs unsigned API fix for Wacom driver (Jason Gerecke)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: generic: Treat serial number and related fields as unsigned
HID: i2c-hid: Send power-on command after reset
Jeff Layton [Thu, 7 Nov 2019 14:39:32 +0000 (09:39 -0500)]
ceph: return -EINVAL if given fsc mount option on kernel w/o support
If someone requests fscache on the mount, and the kernel doesn't
support it, it should fail the mount.
[ Drop ceph prefix -- it's provided by pr_err. ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Takashi Iwai [Thu, 7 Nov 2019 12:52:17 +0000 (13:52 +0100)]
Merge tag 'asoc-fix-v5.4-rc6' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.
Steffen Klassert [Wed, 6 Nov 2019 07:13:49 +0000 (08:13 +0100)]
xfrm: Fix memleak on xfrm state destroy
We leak the page that we use to create skb page fragments
when destroying the xfrm_state. Fix this by dropping a
page reference if a page was assigned to the xfrm_state.
Fixes:
cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Reported-by: JD <jdtxs00@gmail.com>
Reported-by: Paul Wouters <paul@nohats.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pan Bian [Thu, 7 Nov 2019 01:33:20 +0000 (09:33 +0800)]
NFC: st21nfca: fix double free
The variable nfcid_skb is not changed in the callee nfc_hci_get_param()
if error occurs. Consequently, the freed variable nfcid_skb will be
freed again, resulting in a double free bug. Set nfcid_skb to NULL after
releasing it to fix the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 7 Nov 2019 01:30:19 +0000 (09:30 +0800)]
net: hns3: add compatible handling for command HCLGE_OPC_PF_RST_DONE
Since old firmware does not support HCLGE_OPC_PF_RST_DONE, it will
return -EOPNOTSUPP to the driver when received this command. So
for this case, it should just print a warning and return success
to the caller.
Fixes:
72e2fb07997c ("net: hns3: clear reset interrupt status in hclge_irq_handle()")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Nov 2019 05:39:48 +0000 (21:39 -0800)]
Merge tag 'mlx5-fixes-2019-11-06' of git://git./linux/kernel/git/saeed/linux
Saeed Mahamees says:
====================
Mellanox, mlx5 fixes 2019-11-06
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
No -stable this time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 6 Nov 2019 20:51:31 +0000 (21:51 +0100)]
r8169: fix page read in r8168g_mdio_read
Functions like phy_modify_paged() read the current page, on Realtek
PHY's this means reading the value of register 0x1f. Add special
handling for reading this register, similar to what we do already
in r8168g_mdio_write(). Currently we read a random value that by
chance seems to be 0 always.
Fixes:
a2928d28643e ("r8169: use paged versions of phylib MDIO access functions")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Nov 2019 05:22:56 +0000 (21:22 -0800)]
Merge branch 'stmmac-fixes'
Jose Abreu says:
====================
net: stmmac: Fixes for -net
Misc fixes for stmmac.
Patch 1/11 and 2/11, use the correct variable type for bitrev32() calls.
Patch 3/11, fixes the random failures the we were seing when running selftests.
Patch 4/11, prevents a crash that can occur when receiving AVB packets and with
SPH feature enabled on XGMAC.
Patch 5/11, fixes the correct settings for CBS on XGMAC.
Patch 6/11, corrects the interpretation of AVB feature on XGMAC.
Patch 7/11, disables Flow Control for AVB enabled queues on XGMAC.
Patch 8/11, disables MMC interrupts on XGMAC, preventing a storm of interrupts.
Patch 9/11, fixes the number of packets that were being taken into account in
the RX path cleaning function.
Patch 10/11, fixes an incorrect descriptor setting that could cause IP
misbehavior.
Patch 11/11, fixes the IOC generation mechanism when multiple descriptors
are used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 6 Nov 2019 15:03:05 +0000 (16:03 +0100)]
net: stmmac: Fix the TX IOC in xmit path
IOC bit must be only set in the last descriptor. Move the logic up a
little bit to make sure it's set in the correct descriptor.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 6 Nov 2019 15:03:04 +0000 (16:03 +0100)]
net: stmmac: Fix TSO descriptor with Enhanced Addressing
When using addressing > 32 bits the TSO first descriptor only has the
header so we can't set the payload field for this descriptor. Let's
reset the variable so that buffer 2 value is zero.
Fixes:
a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 6 Nov 2019 15:03:03 +0000 (16:03 +0100)]
net: stmmac: Fix the packet count in stmmac_rx()
Currently, stmmac_rx() is counting the number of descriptors but it
should count the number of packets as specified by the NAPI limit.
Fix this.
Fixes:
ec222003bd94 ("net: stmmac: Prepare to add Split Header support")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 6 Nov 2019 15:03:02 +0000 (16:03 +0100)]
net: stmmac: xgmac: Disable MMC interrupts by default
MMC interrupts were being enabled, which is not what we want because it
will lead to a storm of interrupts that are not handled at all. Fix it
by disabling all MMC interrupts for XGMAC.
Fixes:
b6cdf09f51c2 ("net: stmmac: xgmac: Implement MMC counters")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 6 Nov 2019 15:03:01 +0000 (16:03 +0100)]
net: stmmac: xgmac: Disable Flow Control when 1 or more queues are in AV
When in AVB mode we need to disable flow control to prevent MAC from
pausing in TX side.
Fixes:
ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>