OSDN Git Service
Shuah Khan [Wed, 3 Jul 2013 22:07:59 +0000 (15:07 -0700)]
drivers/rtc/class: convert from Legacy pm ops to dev_pm_ops
Convert drivers/rtc/class to use dev_pm_ops for power management and
remove Legacy PM ops hooks. With this change, rtc class registers
suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy
class->suspend/resume. When __device_suspend() runs call-backs, it will
find class->pm ops for the rtc class.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:58 +0000 (15:07 -0700)]
drivers/rtc/rtc-pcf2123.c: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete. Thus, kstrtoul() should be used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Brand [Wed, 3 Jul 2013 22:07:57 +0000 (15:07 -0700)]
drivers/rtc/interface.c: return -EBUSY, not -EACCES when device is busy
If rtc->irq_task is non-NULL and task is NULL, they always
rtc_irq_set_freq(), whenever err is set to -EBUSY it will then immediately
be set to -EACCES, misleading the caller as to the underlying problem.
Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Ujfalusi [Wed, 3 Jul 2013 22:07:56 +0000 (15:07 -0700)]
drivers/rtc/rtc-twl.c: cleanup with module_platform_driver() conversion
Use module_platform_driver() to register the platform driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Ujfalusi [Wed, 3 Jul 2013 22:07:55 +0000 (15:07 -0700)]
drivers/rtc/rtc-twl.c: fix rtc_reg_map initialization
Initialize the rtc_reg_map in platform_driver's probe function instead at
module_init time. This way we can make sure that the twl-core has been
already probed and initialized (twl_priv->twl_id is valid) since the
platform device for the RTC driver will be created by the twl-core after
it finished its init.
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Derek Basehore [Wed, 3 Jul 2013 22:07:54 +0000 (15:07 -0700)]
drivers/rtc/rtc-cmos.c: work around bios clearing rtc control
The bios may clear the rtc control register when resuming the system. Since the
cmos interrupt handler may now be run before the rtc_cmos is resumed, this can
cause the interrupt handler to ignore an alarm since the alarm bit is not set in
the rtc control register. To work around this, check if the rtc_cmos is
suspended and use the stored value for the rtc control register.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kevin Hilman [Wed, 3 Jul 2013 22:07:53 +0000 (15:07 -0700)]
drivers/rtc/rtc-twl.c: ensure IRQ is wakeup enabled
Currently, the RTC IRQ is never wakeup-enabled so is not capable of
bringing the system out of suspend.
On OMAP platforms, we have gotten by without this because the TWL RTC is
on an I2C-connected chip which is capable of waking up the OMAP via the IO
ring when the OMAP is in low-power states.
However, if the OMAP suspends without hitting the low-power states (and
the IO ring is not enabled), RTC wakeups will not work because the IRQ is
not wakeup enabled.
To fix, ensure the RTC IRQ is wakeup enabled whenever the RTC alarm is
set.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:52 +0000 (15:07 -0700)]
drivers/rtc/rtc-pcf8583.c: use PTR_RET()
Use of PTR_RET() simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:51 +0000 (15:07 -0700)]
drivers/rtc/rtc-pcf8563.c: use PTR_RET()
Use of PTR_RET() simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:50 +0000 (15:07 -0700)]
drivers/rtc/rtc-m48t35.c: use PTR_RET()
Use of PTR_RET() simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:49 +0000 (15:07 -0700)]
drivers/rtc/rtc-isl12022.c: use PTR_RET()
Use of PTR_RET() simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:48 +0000 (15:07 -0700)]
drivers/rtc/rtc-da9052.c: use PTR_RET()
Use of PTR_RET() simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:47 +0000 (15:07 -0700)]
drivers/rtc/rtc-mpc5121.c: use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey Yanovich [Wed, 3 Jul 2013 22:07:46 +0000 (15:07 -0700)]
drivers/rtc/rtc-ds1302.c: handle write protection
This chip has a control register and can prevent altering saved clock.
Without this patch we could have:
(arm)root@pac14:~# date
Tue May 21 03:08:27 MSK 2013
(arm)root@pac14:~# /etc/init.d/hwclock.sh show
Tue May 21 11:13:58 2013 -0.067322 seconds
(arm)root@pac14:~# /etc/init.d/hwclock.sh stop
[info] Saving the system clock.
[info] Hardware Clock updated to Tue May 21 03:09:01 MSK 2013.
(arm)root@pac14:~# /etc/init.d/hwclock.sh show
Tue May 21 11:14:15 2013 -0.624272 seconds
The patch enables write access to rtc before the driver tries to write
time and re-disables when time data is written.
Signed-off-by: Sergey Yanovich <ynvich@gmail.com>
Acked-by: Marc Zyngier <maz@misterjones.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Torgue [Wed, 3 Jul 2013 22:07:45 +0000 (15:07 -0700)]
drivers/rtc/rtc-ab8500.c: add second resolution to rtc driver
Android expects the RTC to have second resolution. On ab8540 cut2 RTC
block has a new register which allows setting seconds for wakeup alarms.
Existing registers (minutes hi, mid and low) have seen their offsets
changed. Here is the new mapping:
* AlarmSec (A) 0x22
* AlarmMinLow (M) from 0x8 to 0x23
* AlarmMinMid (M) from 0x9 to 0x24
* AlarmMinHigh (M) from 0xA to 0x25
Signed-off-by: Julien Delacou <julien.delacou@stericsson.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:44 +0000 (15:07 -0700)]
drivers/rtc/rtc-wm831x.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:43 +0000 (15:07 -0700)]
drivers/rtc/rtc-tps80031.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:42 +0000 (15:07 -0700)]
drivers/rtc/rtc-sun4v.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:41 +0000 (15:07 -0700)]
drivers/rtc/rtc-starfire.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:40 +0000 (15:07 -0700)]
drivers/rtc/rtc-snvs.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:39 +0000 (15:07 -0700)]
drivers/rtc/rtc-rx8581.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:38 +0000 (15:07 -0700)]
drivers/rtc/rtc-rs5c348.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:37 +0000 (15:07 -0700)]
drivers/rtc/rtc-rx4581.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Torben Hohn <torbenh@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:36 +0000 (15:07 -0700)]
drivers/rtc/rtc-rv3029c2.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:36 +0000 (15:07 -0700)]
drivers/rtc/rtc-rs5c313.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:35 +0000 (15:07 -0700)]
drivers/rtc/rtc-ps3.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:34 +0000 (15:07 -0700)]
drivers/rtc/rtc-pcf8583.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:33 +0000 (15:07 -0700)]
drivers/rtc/rtc-pcf8563.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:32 +0000 (15:07 -0700)]
drivers/rtc/rtc-pcf8523.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:31 +0000 (15:07 -0700)]
drivers/rtc/rtc-max8997.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: <ms925.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:30 +0000 (15:07 -0700)]
drivers/rtc/rtc-max77686.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Chiwoong Byun <woong.byun@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:29 +0000 (15:07 -0700)]
drivers/rtc/rtc-max8907.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:28 +0000 (15:07 -0700)]
drivers/rtc/rtc-max6900.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:27 +0000 (15:07 -0700)]
drivers/rtc/rtc-max6902.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:26 +0000 (15:07 -0700)]
drivers/rtc/rtc-m41t94.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kim B. Heino <Kim.Heino@bluegiga.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:25 +0000 (15:07 -0700)]
drivers/rtc/rtc-generic.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:24 +0000 (15:07 -0700)]
drivers/rtc/rtc-m48t35.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:23 +0000 (15:07 -0700)]
drivers/rtc/rtc-m41t93.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:22 +0000 (15:07 -0700)]
drivers/rtc/rtc-isl12022.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:21 +0000 (15:07 -0700)]
drivers/rtc/rtc-fm3130.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:20 +0000 (15:07 -0700)]
drivers/rtc/rtc-em3027.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:19 +0000 (15:07 -0700)]
drivers/rtc/rtc-efi.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: dann frazier <dannf@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:18 +0000 (15:07 -0700)]
drivers/rtc/rtc-ds1390.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:17 +0000 (15:07 -0700)]
drivers/rtc/rtc-ds3234.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Dennis Aberilla <denzzzhome@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:17 +0000 (15:07 -0700)]
drivers/rtc/rtc-ds1672.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:16 +0000 (15:07 -0700)]
drivers/rtc/rtc-ds1286.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:15 +0000 (15:07 -0700)]
drivers/rtc/rtc-ds1216.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:07:14 +0000 (15:07 -0700)]
drivers/rtc/rtc-bq32k.c: remove empty function
After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:13 +0000 (15:07 -0700)]
rtc: rtc-rc5t583: use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:12 +0000 (15:07 -0700)]
rtc: rtc-coh901331: use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:11 +0000 (15:07 -0700)]
rtc: rtc-sh: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:10 +0000 (15:07 -0700)]
rtc: rtc-rx8025: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:09 +0000 (15:07 -0700)]
rtc: rtc-pxa: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:09 +0000 (15:07 -0700)]
rtc: rtc-pm8xxx: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:08 +0000 (15:07 -0700)]
rtc: rtc-m48t59: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:07 +0000 (15:07 -0700)]
rtc: rtc-mpc5121: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:06 +0000 (15:07 -0700)]
rtc: rtc-jz4740: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:07:05 +0000 (15:07 -0700)]
rtc: rtc-ds1307: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yongjun [Wed, 3 Jul 2013 22:07:04 +0000 (15:07 -0700)]
drivers/rtc/rtc-vr41xx.c: fix error return code in rtc_probe()
Fix to return -EBUSY in the platform irq get error handling case instead
of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bernie Thompson [Wed, 3 Jul 2013 22:07:03 +0000 (15:07 -0700)]
rtc: add ability to push out an existing wakealarm using sysfs
This adds the ability for the rtc sysfs code to handle += characters at
the beginning of a wakealarm setting string. This will allow the user
to attempt to push out an existing wakealarm by a provided amount.
In the case that the += characters are provided but the alarm is not
active -EINVAL is returned.
his is useful, at least for my purposes in suspend/resume testing. The
basic test goes something like:
1. Set a wake alarm from userspace 5 seconds in the future
2. Start the suspend process (echo mem > /sys/power/state)
3. After ~2.5 seconds if userspace is still running (using another
thread to check this), move the wake alarm 5 more seconds
If the "move" involves an unset of the wakealarm then there's a period
of time where the system is midway through suspending but has no wake
alarm. It will get stuck.
We'd rather not remove the "move" since the idea is to avoid a cancelled
suspend when the alarm fires _during_ suspend. It is difficult for the
test to tell the difference between a suspend that was cancelled because
the alarm fired too early and a suspend that was
Signed-off-by: Bernie Thompson <bhthompson@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Doug Anderson <dianders@chromium.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Holler [Wed, 3 Jul 2013 22:07:02 +0000 (15:07 -0700)]
rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes.
There is no real reason to not support 16 or 32 bit values too.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Holler [Wed, 3 Jul 2013 22:07:00 +0000 (15:07 -0700)]
rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports
The draft for HID-sensors (HUTRR39) currently doesn't define the range
for the attribute year. Asking one of the authors revealed that full
years (e.g. 2013 instead of just 13) were meant.
So we now allow both, 8 bit and 16 bit values for the attribute year and
assuming full years when the value is 16 bits wide.
We will still support 8 bit values until the specification gets final
(and maybe defines a way to set the time too).
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:59 +0000 (15:06 -0700)]
drivers/rtc/rtc-ab3100.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:58 +0000 (15:06 -0700)]
drivers/rtc/rtc-au1xxx.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:57 +0000 (15:06 -0700)]
drivers/rtc/rtc-bq4802.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:56 +0000 (15:06 -0700)]
drivers/rtc/rtc-da9052.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:56 +0000 (15:06 -0700)]
drivers/rtc/rtc-da9055.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:55 +0000 (15:06 -0700)]
drivers/rtc/rtc-dm355evm.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:54 +0000 (15:06 -0700)]
drivers/rtc/rtc-ds1302.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:53 +0000 (15:06 -0700)]
drivers/rtc/rtc-lp8788.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:51 +0000 (15:06 -0700)]
drivers/rtc/rtc-ls1x.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: zhao zhang <zhzhl555@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:51 +0000 (15:06 -0700)]
drivers/rtc/rtc-max8925.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:50 +0000 (15:06 -0700)]
drivers/rtc/rtc-max8998.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:49 +0000 (15:06 -0700)]
drivers/rtc/rtc-msm6242.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:48 +0000 (15:06 -0700)]
drivers/rtc/rtc-nuc900.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:47 +0000 (15:06 -0700)]
drivers/rtc/rtc-tile.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sachin Kamat [Wed, 3 Jul 2013 22:06:46 +0000 (15:06 -0700)]
drivers/rtc/rtc-m48t86.c: remove empty function
After the switch to devm_ functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Axel Lin [Wed, 3 Jul 2013 22:06:45 +0000 (15:06 -0700)]
drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq
In the disable AIE irq code path, current code passes "1" to enable
parameter of rv3029c2_rtc_i2c_alarm_set_irq(). Thus it does not disable
AIE irq.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Heiko Schocher <hs@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:44 +0000 (15:06 -0700)]
rtc: rtc-tile: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:43 +0000 (15:06 -0700)]
rtc: rtc-rp5c01: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:42 +0000 (15:06 -0700)]
rtc: rtc-puv3: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:41 +0000 (15:06 -0700)]
rtc: rtc-m48t86: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:40 +0000 (15:06 -0700)]
rtc: rtc-vt8500: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:39 +0000 (15:06 -0700)]
rtc: rtc-vr41xx: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:38 +0000 (15:06 -0700)]
rtc: rtc-twl: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:37 +0000 (15:06 -0700)]
rtc: rtc-stmp3xxx: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:36 +0000 (15:06 -0700)]
rtc: rtc-spear: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:36 +0000 (15:06 -0700)]
rtc: rtc-sh: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:35 +0000 (15:06 -0700)]
rtc: rtc-sa1100: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:34 +0000 (15:06 -0700)]
rtc: rtc-s3c: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:33 +0000 (15:06 -0700)]
rtc: rtc-pm8xxx: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:32 +0000 (15:06 -0700)]
rtc: rtc-pcap: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:31 +0000 (15:06 -0700)]
rtc: rtc-nuc900: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Wan Zongshun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:30 +0000 (15:06 -0700)]
rtc: rtc-mxc: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:29 +0000 (15:06 -0700)]
rtc: rtc-msm6242: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:29 +0000 (15:06 -0700)]
rtc: rtc-mc13xxx: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:28 +0000 (15:06 -0700)]
rtc: rtc-max8998: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:27 +0000 (15:06 -0700)]
rtc: rtc-max8925: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:26 +0000 (15:06 -0700)]
rtc: rtc-m48t59: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Wed, 3 Jul 2013 22:06:25 +0000 (15:06 -0700)]
rtc: rtc-ls1x: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or
on probe failure, since commit
0998d063100 ("device-core: Ensure drvdata
= NULL when no driver is bound"). Thus, it is not needed to manually
clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>