OSDN Git Service
Ville Syrjälä [Wed, 11 Sep 2019 13:31:29 +0000 (16:31 +0300)]
drm/i915: Remove duplicated bxt/cnl/icl .modeset_calc_cdclk() funcs
Reuse the same .modeset_calc_cdclk() function for all bxt+.
The only difference in between the cnl/icl and the bxt variants
is the call to cnl_compute_min_voltage_level(). We can do that call
just fine on older platforms since they leave min_voltage_level[]
zeroed. Let's rename the function to bxt_compute_min_voltage_level()
just so it stays consistent with the rest of the naming scheme.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 11 Sep 2019 13:31:28 +0000 (16:31 +0300)]
drm/i915: Reuse cnl_modeset_calc_cdclk() on icl+
The cnl and icl .modeset_calc_cdclk() functions are identical. Drop one
copy.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-3-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 11 Sep 2019 13:31:27 +0000 (16:31 +0300)]
drm/i915: Fix CD2X pipe select masking during cdclk sanitation
We're forgetting to mask off all three pipe select bits from the
CDCLK_CTL value on icl+ which may lead to the extra bit being
left in. That will cause us to consider the current hardware
cdclk state as invalid, and we proceed to sanitize it even
though the hardware may have active pipes and whatnot.
Fix up the mask so we get rid of all three pipe select bits
and thus hopefully no longer sanitize cdclk when it's already
correctly programmed.
Cc: Matt Roper <matthew.d.roper@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111641
Fixes:
0c1279b58fc7 ("drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-2-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 11 Sep 2019 13:31:26 +0000 (16:31 +0300)]
drm/i915: Fix cdclk bypass freq readout for tgl/bxt/glk
On tgl/bxt/glk the cdclk bypass frequency depends on the PLL
reference clock. So let's read out the ref clock before we
try to compute the bypass clock.
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes:
71dc367e2bc3 ("drm/i915: Consolidate bxt/cnl/icl cdclk readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-1-ville.syrjala@linux.intel.com
Jani Nikula [Wed, 11 Sep 2019 09:26:08 +0000 (12:26 +0300)]
drm/i915: add INTEL_NUM_PIPES() and use it
Abstract away direct access to ->num_pipes to allow further
refactoring. No functional changes.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911092608.13009-1-jani.nikula@intel.com
Chris Wilson [Wed, 11 Sep 2019 11:46:55 +0000 (12:46 +0100)]
drm/i915: Squeeze iommu status into debugfs/i915_capabilities
There's no easy way of checking whether iommu is enabled for the GPU
(you can grep dmesg if you know the device, or you can grep
i915_gpu_info if that's available). We do have a central
i915_capabilities with the intent of listing such pertinent information,
so add the iommu status.
Suggested-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911114655.9254-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 11 Sep 2019 12:57:17 +0000 (13:57 +0100)]
drm/i915/tgl: Disable read-only ppgtt support
The same read-only affliction as befell Icelake is affecting Tigerlake.
Disable the read-only support as clearly it was not fixed.
Testcase: igt/i915_selftests/live_gem_context
References:
3936867dbc1e ("drm/i915: Disable read only ppgtt support for gen11")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911125717.28997-1-chris@chris-wilson.co.uk
Ville Syrjälä [Mon, 8 Jul 2019 12:53:09 +0000 (15:53 +0300)]
drm/i915: Remove pointless planes_changed=true assignment
i915 doesn't use the crtc_state->plane_changed flag for anything,
so setting it is pointless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Ville Syrjälä [Tue, 10 Sep 2019 12:13:47 +0000 (15:13 +0300)]
drm/i915: Use a high priority wq for nonblocking plane updates
system_unbound_wq can't keep up sometimes and we get dropped frames.
Switch to a high priority variant.
Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910121347.22958-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Wed, 11 Sep 2019 07:47:27 +0000 (08:47 +0100)]
drm/i915/display: Add glk_cdclk_table
Commit
736da8112fee ("drm/i915: Use literal representation of cdclk
tables") pushed the cdclk logic into tables, adding glk_cdclk_table but
not using yet:
drivers/gpu/drm/i915/display/intel_cdclk.c:1173:38: error: ‘glk_cdclk_table’ defined but not used [-Werror=unused-const-variable=]
Fixes:
736da8112fee ("drm/i915: Use literal representation of cdclk tables")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911074727.32585-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 11 Sep 2019 09:02:43 +0000 (10:02 +0100)]
drm/i915: Make i915_vma.flags atomic_t for mutex reduction
In preparation for reducing struct_mutex stranglehold around the vm,
make the vma.flags atomic so that we can acquire a pin on the vma
atomically before deciding if we need to take the mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911090243.16786-1-chris@chris-wilson.co.uk
Kenneth Graunke [Wed, 11 Sep 2019 01:48:01 +0000 (18:48 -0700)]
drm/i915: Whitelist COMMON_SLICE_CHICKEN2
This allows userspace to use "legacy" mode for push constants, where
they are committed at 3DPRIMITIVE or flush time, rather than being
committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time. Gen6-8 and Gen11
both use the "legacy" behavior - only Gen9 works in the "new" way.
Conflating push constants with binding tables is painful for userspace,
we would like to be able to avoid doing so.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911014801.26821-1-kenneth@whitecape.org
Chris Wilson [Tue, 10 Sep 2019 21:22:04 +0000 (22:22 +0100)]
drm/i915: Make shrink/unshrink be atomic
Add an atomic counter and always take the spinlock around the pin/unpin
events, so that we can perform the list manipulation concurrently.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910212204.17190-1-chris@chris-wilson.co.uk
Tvrtko Ursulin [Tue, 10 Sep 2019 14:38:23 +0000 (15:38 +0100)]
drm/i915: Make pm_notify take intel_gt
These notifications operate on intel_gt so make the code take what it
needs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-5-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Tue, 10 Sep 2019 14:38:22 +0000 (15:38 +0100)]
drm/i915: Avoid round-trip via i915 in intel_gt_park
Both in the container_of and getting to gt->awake there is no need to go
via i915 since both the wakeref and awake are members of gt.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-4-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Tue, 10 Sep 2019 14:38:21 +0000 (15:38 +0100)]
drm/i915: Make wait_for_timelines take struct intel_gt
Timelines live in struct intel_gt so make wait_for_timelines take
exactly what it needs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-3-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Tue, 10 Sep 2019 14:38:20 +0000 (15:38 +0100)]
drm/i915: Move GT init to intel_gt.c
Code in i915_gem_init_hw is all about GT init so move it to intel_gt.c
renaming to intel_gt_init_hw.
Existing intel_gt_init_hw is renamed to intel_gt_init_hw_early since it
is currently called from driver probe.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-2-tvrtko.ursulin@linux.intel.com
Matt Roper [Tue, 10 Sep 2019 15:42:52 +0000 (08:42 -0700)]
drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk
The BXT and CNL functions were already basically identical, whereas
ICL's function tried to do its own sanitization rather than calling
bxt_sanitize_cdclk.
This should actually fix a bug in our ICL initialization where it would
consider the /2 CD2X divider invalid and force an unnecessary
sanitization (we now have valid clock frequencies that use this
divider).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-9-matthew.d.roper@intel.com
Matt Roper [Tue, 10 Sep 2019 15:42:51 +0000 (08:42 -0700)]
drm/i915: Enhance cdclk sanitization
When reading out the BIOS-programmed cdclk state, let's make sure that
the cdclk value is on the valid list for the platform, ensure that the
VCO matches the cdclk, and ensure that the CD2X divider was set
properly.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-8-matthew.d.roper@intel.com
Matt Roper [Tue, 10 Sep 2019 15:42:50 +0000 (08:42 -0700)]
drm/i915: Add calc_voltage_level display vfunc
With all of the cdclk function consolidation, we can cut down on a lot
of platform if/else logic by creating a vfunc that's initialized at
startup.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-7-matthew.d.roper@intel.com
Matt Roper [Tue, 10 Sep 2019 15:42:49 +0000 (08:42 -0700)]
drm/i915: Consolidate {bxt,cnl,icl}_uninit_cdclk
The uninitialize flow is the same on all of these platforms, aside from
calculating a different frequency level.
v2: Reverse platform conditional order for consistency. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-6-matthew.d.roper@intel.com
Matt Roper [Tue, 10 Sep 2019 15:42:48 +0000 (08:42 -0700)]
drm/i915: Kill cnl_sanitize_cdclk()
The CNL variant of this function is identical to the BXT variant aside
from not needing to handle SSA precharge.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-5-matthew.d.roper@intel.com
Matt Roper [Tue, 10 Sep 2019 15:42:47 +0000 (08:42 -0700)]
drm/i915: Combine bxt_set_cdclk and cnl_set_cdclk
We'd previously combined ICL/TGL logic into the cnl_set_cdclk function,
but BXT is pretty similar as well. Roll the cnl/icl/tgl logic back into
the bxt function; the only things we really need to handle separately
are punit notification and calling different functions to enable/disable
the cdclk PLL.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-4-matthew.d.roper@intel.com
Matt Roper [Tue, 10 Sep 2019 16:15:06 +0000 (09:15 -0700)]
drm/i915: Use literal representation of cdclk tables
The bspec lays out legal cdclk frequencies, PLL ratios, and CD2X
dividers in an easy-to-read table for most recent platforms. We've been
translating the data from that table into platform-specific code logic,
but it's easy to overlook an area we need to update when adding new
cdclk values or enabling new platforms. Let's just add a form of the
bspec table to the code and then adjust our functions to pull what they
need directly out of the table.
v2: Fix comparison when finding best cdclk.
v3: Another logic fix for calc_cdclk.
v4:
- Use named initializers for cdclk tables. (Ville)
- Include refclk as a field in the table instead of adding all three
ratios for each entry. (Ville)
- Terminate tables with an empty entry to avoid needing to store the
table size. (Ville)
- Don't try so hard to return reasonable values from our lookup
functions if we get impossible inputs; just WARN and return 0.
(Ville)
- Keep a bxt_ prefix on the lookup functions since they're still only
used on bxt+ for now. We can rename them later if we extend this
table-based approach back to older platforms. (Ville)
v5:
- Fix cnl table's ratios for 24mhz refclk. (Ville)
- Don't miss the named initializers on the cnl table. (Ville)
- Represent refclk in table as u16 rather than u32. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910161506.7158-1-matthew.d.roper@intel.com
Matt Roper [Tue, 10 Sep 2019 16:05:20 +0000 (09:05 -0700)]
drm/i915: Consolidate bxt/cnl/icl cdclk readout
Aside from a few minor register changes and some different clock values,
cdclk design hasn't changed much since gen9lp. Let's consolidate the
handlers for bxt, cnl, and icl to keep the codeflow consistent.
Also, while we're at it, s/bxt_de_pll_update/bxt_de_pll_readout/ since
"update" makes me think we should be writing to hardware rather than
reading from it.
v2:
- Fix icl_calc_voltage_level() limits. (Ville)
- Use CNL_CDCLK_PLL_RATIO_MASK rather than BXT_DE_PLL_RATIO_MASK on
gen10+ to avoid confusion. (Ville)
v3:
- Also fix ehl_calc_voltage_level() limits. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910160520.6587-1-matthew.d.roper@intel.com
Chris Wilson [Tue, 10 Sep 2019 16:16:57 +0000 (17:16 +0100)]
drm/i915/tgl: Disable rc6 for debugging
Empirical evidence from CI tells us that our rc6 setup for Tigerlake is
off. Disable rc6 on tgl temporary so that we gain CI coverage as we
prepare a fix. It also appears that the BIOS on our tgl leaves rc6
enabled, so we have to explicitly disable it on init.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111593
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910161657.23037-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Sep 2019 12:10:09 +0000 (13:10 +0100)]
drm/i915/selftests: Tighten the timeout testing for partial mmaps
Currently, if there is time remaining before the start of the loop, we
do one full iteration over many possible different chunks within the
object. A full loop may take 50+s (depending on speed of indirect GTT
mmapings) and we try separately with LINEAR, X and Y -- at which point
igt times out. If we check more frequently, we will interrupt the loop
upon our timeout -- it is hard to argue for as this significantly reduces
the test coverage as we dramatically reduce the runtime. In practical
terms, the coverage we should prioritise is in using different fence
setups, forcing verification of the tile row computations over the
current preference of checking extracting chunks. Though the exhaustive
search is great given an infinite timeout, to improve our current
coverage, we also add a randomised smoketest of partial mmaps. So let's
do both, add a randomised smoketest of partial tiling chunks and the
exhaustive (though time limited) search for failures.
Even in adding another subtest, we should shave 100s off BAT! (With,
hopefully, no loss in coverage, at least over multiple runs.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910121009.13431-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 9 Sep 2019 11:00:06 +0000 (12:00 +0100)]
drm/i915/selftests: Take runtime wakeref for igt_ggtt_lowlevel
Being a "low-level" test, we opt to bypass the normal bind/unbind hooks
for the lower level insert_entries/clear_range. For ggtt, the
bind/unbind hooks provide the runtime wakeref and so we must also handle
this in exercising the low level hooks.
<4> [538.151672] RPM raw-wakeref not held
<4> [538.151825] WARNING: CPU: 0 PID: 11 at ./drivers/gpu/drm/i915/intel_runtime_pm.h:107 fwtable_read32+0x1be/0x300 [i915]
<4> [538.151830] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp btusb btrtl btbcm x86_pkg_temp_thermal coretemp btintel crct10dif_pclmul bluetooth crc32_pclmul snd_intel_nhlt snd_hda_codec ecdh_generic ghash_clmulni_intel ecc snd_hwdep snd_hda_core lpc_ich r8169 realtek snd_pcm mei_me mei prime_numbers pinctrl_broxton pinctrl_intel [last unloaded: i915]
<4> [538.151861] CPU: 0 PID: 11 Comm: migration/0 Tainted: G U 5.3.0-rc7-CI-Trybot_4938+ #1
<4> [538.151864] Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0056.2018.0926.1100 09/26/2018
<4> [538.151960] RIP: 0010:fwtable_read32+0x1be/0x300 [i915]
<4> [538.151965] Code: e8 e7 f9 5f e0 e9 0b ff ff ff 80 3d d5 8d 26 00 00 0f 85 81 fe ff ff 48 c7 c7 ef 01 bd a0 c6 05 c1 8d 26 00 01 e8 b2 e4 6a e0 <0f> 0b e9 67 fe ff ff 80 3d ad 8d 26 00 00 0f 85 65 fe ff ff 48 c7
<4> [538.151969] RSP: 0018:
ffffc9000007be10 EFLAGS:
00010086
<4> [538.151972] RAX:
0000000000000000 RBX:
ffff88826be10d50 RCX:
0000000000000002
<4> [538.151975] RDX:
0000000080000002 RSI:
0000000000000000 RDI:
00000000ffffffff
<4> [538.151978] RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
<4> [538.151981] R10:
0000000000000000 R11:
ffffc9000007bcb0 R12:
0000000000101008
<4> [538.151984] R13:
0000000000000000 R14:
ffffc9000036f638 R15:
0000000000000002
<4> [538.151987] FS:
0000000000000000(0000) GS:
ffff888277a00000(0000) knlGS:
0000000000000000
<4> [538.151990] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [538.151993] CR2:
00007fd48e7052f8 CR3:
0000000005210000 CR4:
00000000003406f0
<4> [538.151995] Call Trace:
<4> [538.152106] bxt_vtd_ggtt_clear_range__cb+0x38/0x40 [i915]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 9 Sep 2019 11:00:08 +0000 (12:00 +0100)]
drm/i915: Perform GGTT restore much earlier during resume
As soon as we re-enable the various functions within the HW, they may go
off and read data via a GGTT offset. Hence, if we have not yet restored
the GGTT PTE before then, they may read and even *write* random locations
in memory.
Detected by DMAR faults during resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk
Chris Wilson [Mon, 9 Sep 2019 11:30:18 +0000 (12:30 +0100)]
drm/i915/ringbuffer: Flush writes before RING_TAIL update
Be paranoid and make sure we flush any and all writes out of the WCB
before performing the UC mmio to update the RING_TAIL. (An UC write
should itself be enough to do the flush, hence the paranoia here.) Quite
infrequently, we see problems where the GPU seems to overshoot the
RING_TAIL and so executes garbage, hence the speculation.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111598
References: https://bugs.freedesktop.org/show_bug.cgi?id=111417
References: https://bugs.freedesktop.org/show_bug.cgi?id=111034
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909113018.13300-1-chris@chris-wilson.co.uk
Chris Wilson [Sat, 7 Sep 2019 08:43:34 +0000 (09:43 +0100)]
drm/i915/execlists: Ignore lost completion events
Icelake hit an issue where it missed reporting a completion event and
instead jumped straight to a idle->active event (skipping over the
active->idle and not even hitting the lite-restore preemption).
661497511us : process_csb: rcs0 cs-irq head=11, tail=0
661497512us : process_csb: rcs0 csb[0]: status=0x10008002:0x00000020 [lite-restore]
661497512us : trace_ports: rcs0: preempted { 28cc8:11052, 0:0 }
661497513us : trace_ports: rcs0: promote { 28cc8:11054, 0:0 }
661497514us : __i915_request_submit: rcs0 fence 28cc8:11056, current 11052
661497514us : __execlists_submission_tasklet: rcs0: queue_priority_hint:-
2147483648, submit:yes
661497515us : trace_ports: rcs0: submit { 28cc8:11056, 0:0 }
661497530us : process_csb: rcs0 cs-irq head=0, tail=1
661497530us : process_csb: rcs0 csb[1]: status=0x10008002:0x00000020 [lite-restore]
661497531us : trace_ports: rcs0: preempted { 28cc8:11054!, 0:0 }
661497535us : trace_ports: rcs0: promote { 28cc8:11056, 0:0 }
661497540us : __i915_request_submit: rcs0 fence 28cc8:11058, current 11054
661497544us : __execlists_submission_tasklet: rcs0: queue_priority_hint:-
2147483648, submit:yes
661497545us : trace_ports: rcs0: submit { 28cc8:11058, 0:0 }
661497553us : process_csb: rcs0 cs-irq head=1, tail=2
661497553us : process_csb: rcs0 csb[2]: status=0x10000001:0x00000000 [idle->active]
661497574us : process_csb: process_csb:1538 GEM_BUG_ON(*execlists->active)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190907084334.28952-1-chris@chris-wilson.co.uk
Swati Sharma [Mon, 9 Sep 2019 12:01:43 +0000 (17:31 +0530)]
drm/i915/display: Extract chv_read_luts()
For cherryview, add hw read out to create hw blob of gamma
lut values.
Review comments from previous series:
https://patchwork.freedesktop.org/patch/328252
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed function cherryview_get_color_config() to chv_read_luts()
-Renamed cherryview_get_gamma_config() to chv_read_cgm_gamma_lut()
[Ville]
v9: -80 character limit [Uma]
-Made read func para as const [Ville, Uma]
-Renamed chv_read_cgm_gamma_lut() to chv_read_cgm_gamma_lut()
[Ville, Uma]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-4-git-send-email-swati2.sharma@intel.com
Swati Sharma [Mon, 9 Sep 2019 12:01:42 +0000 (17:31 +0530)]
drm/i915/display: Extract i965_read_luts()
For i965, add hw read out to create hw blob of gamma
lut values.
Review comments from old series:
https://patchwork.freedesktop.org/series/58039/
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally
within the function [Ville]
-Renamed i965_get_color_config() to i965_read_lut() [Ville]
-Renamed i965_get_gamma_config_10p6() to i965_read_gamma_lut_10p6()
[Ville]
v9: -Typo and 80 character limit [Uma]
-Made read func para as const [Ville, Uma]
-Renamed i965_read_gamma_lut_10p6() to i965_read_lut_10p6() [Ville, Uma]
v10: -Swapped ldw and udw while creating hw blob [Jani]
-Added last index rgb lut value from PIPEGCMAX to h/w blob [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-3-git-send-email-swati2.sharma@intel.com
Swati Sharma [Mon, 9 Sep 2019 12:01:41 +0000 (17:31 +0530)]
drm/i915/display: Add gamma precision function for CHV
intel_color_get_gamma_bit_precision() is extended for
cherryview by adding chv_gamma_precision(), i965 will use existing
i9xx_gamma_precision() func only.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-2-git-send-email-swati2.sharma@intel.com
Chris Wilson [Tue, 10 Sep 2019 08:02:08 +0000 (09:02 +0100)]
drm/i915/execlists: Clear STOP_RING bit on reset
During reset, we try to ensure no forward progress of the CS prior to
the reset by setting the STOP_RING bit in RING_MI_MODE. Since gen9, this
register is context saved and do we end up in the odd situation where we
save the STOP_RING bit and so try to stop the engine again immediately
upon resume. This is quite unexpected and causes us to complain about an
early CS completion event!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111514
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910080208.4223-1-chris@chris-wilson.co.uk
Matthew Auld [Mon, 9 Sep 2019 17:16:46 +0000 (18:16 +0100)]
drm/i915: include GTT page-size info in error state
It might prove useful in the future to know if the vma is utilising
huge-GTT-pages. Related to this is the GTT cache, where there is some HW
"quirkiness" where it must be disabled if using 2M pages, so include
that for good measure.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909171646.22090-1-matthew.auld@intel.com
Matthew Auld [Mon, 9 Sep 2019 12:40:52 +0000 (13:40 +0100)]
drm/i915: cleanup cache-coloring
Try to tidy up the cache-coloring such that we rid the code of any
mm.color_adjust assumptions, this should hopefully make it more obvious
in the code when we need to actually use the cache-level as the color,
and as a bonus should make adding a different color-scheme simpler.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-3-matthew.auld@intel.com
Matthew Auld [Mon, 9 Sep 2019 12:40:51 +0000 (13:40 +0100)]
drm/i915: s/i915_gtt_color_adjust/i915_ggtt_color_adjust
Make it clear that the color adjust callback applies to the ggtt.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-2-matthew.auld@intel.com
Matthew Auld [Mon, 9 Sep 2019 12:40:50 +0000 (13:40 +0100)]
drm/i915: export color_differs
Export color_differs so that we can use it elsewhere.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-1-matthew.auld@intel.com
Chris Wilson [Sat, 7 Sep 2019 10:50:46 +0000 (11:50 +0100)]
drm/i915/execlists: Remove incorrect BUG_ON for schedule-out
As we may unwind incomplete requests (for preemption) prior to
processing the CSB and the schedule-out events, we may update rq->engine
(resetting it to point back to the parent virtual engine) prior to
calling execlists_schedule_out(), invalidating the assertion that the
request still points to the inflight engine. (The likelihood of this is
increased if the CSB interrupt processing is pushed to the ksoftirqd for
being too slow and direct submission overtakes it.)
Tvrtko summarised it as:
"So unwind from direct submission resets rq->engine and races with
process_csb from the tasklet which notices request has actually
completed."
Reported-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes:
df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190907105046.19934-1-chris@chris-wilson.co.uk
Matthew Auld [Thu, 5 Sep 2019 07:29:21 +0000 (10:29 +0300)]
drm/i915/buddy: add missing call to i915_global_register
We are meant to register the kmem cache at init, such the supplied exit
and shrink hooks can be called.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905072921.7979-1-matthew.auld@intel.com
Andi Shyti [Thu, 5 Sep 2019 11:14:03 +0000 (14:14 +0300)]
drm/i915: Hook up GT power management
Refactor the GT power management interface to work through the GT now
that it is under the control of gt/
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905111403.10071-1-andi.shyti@intel.com
Michel Thierry [Fri, 6 Sep 2019 12:23:14 +0000 (15:23 +0300)]
drm/i915/tgl: Register state context definition for Gen12
Gen12 has subtle changes in the reg state context offsets (some fields
are gone, some are in a different location), compared to previous Gens.
The simplest approach seems to be keeping Gen12 (and future platform)
changes apart from the previous gens, while keeping the registers that
are contiguous in functions we can reuse.
v2: alias, virtual engine, rpcs, prune unused regs
v3: use engine base (Daniele), take ctx_bb for all
Bspec: 46255
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Tested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
[ickle: Tweaked the GEM_WARN_ON after settling on a compromise with
Daniele]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906122314.2146-2-mika.kuoppala@linux.intel.com
Mika Kuoppala [Fri, 6 Sep 2019 13:49:57 +0000 (16:49 +0300)]
drm/i915: Use engine relative LRIs on context setup
Daniele pointed out that relative mmio works differently in
on context restore. Instead of adding the engine mmio base to offset,
it masks out the base and adds bits [12:2] to current engine base.
This should allow us to construct context register state to be
applicable to all instances, including virtual. And avoid the trouble
of updating the registers on virtual instances when submitting work.
v2: only enable for gen12 for now (Mika)
v3: make enabling readable (Chris)
Bspec: 20206
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906134957.25909-1-mika.kuoppala@linux.intel.com
Matt Roper [Thu, 5 Sep 2019 18:13:37 +0000 (11:13 -0700)]
drm/i915/tgl: Use refclk/2 as bypass frequency
Unlike gen11, which always ran at 50MHz when the cdclk PLL was disabled,
TGL runs at refclk/2. The 50MHz croclk/2 is only used by hardware
during some power state transitions.
Bspec: 49201
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905181337.23727-1-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Sat, 13 Apr 2019 11:13:27 +0000 (11:13 +0000)]
drm/i915: add immutable zpos plane properties
This adds basic immutable support for the zpos property. The zpos increases
from bottom to top: primary, sprites, cursor.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[contact@emersion.fr: adapted for latest drm-tip]
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/YSH9PasoADJJdNJCSdI4m55ankIBsCaoSgkw-NQ5dlruCAxc8J-SQwVl5n3ddSAMDLTdbdyQvkONmtbjkUU-TQk5VIu1p-aZRO1OjjuSxjY=@emersion.fr
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Chris Wilson [Tue, 3 Sep 2019 06:21:33 +0000 (07:21 +0100)]
drm/i915: Protect debugfs per_file_stats with RCU lock
If we make sure we grab a strong reference to each object as we dump it,
we can reduce the locks outside of our iterators to an rcu_read_lock.
This should prevent errors like:
[ 2138.371911] BUG: KASAN: use-after-free in per_file_stats+0x43/0x380 [i915]
[ 2138.371924] Read of size 8 at addr
ffff888223651000 by task cat/8293
[ 2138.371947] CPU: 0 PID: 8293 Comm: cat Not tainted 5.3.0-rc6-CI-Custom_4352+ #1
[ 2138.371953] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017
[ 2138.371959] Call Trace:
[ 2138.371974] dump_stack+0x7c/0xbb
[ 2138.372099] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372108] print_address_description+0x73/0x3a0
[ 2138.372231] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372352] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372362] __kasan_report+0x14e/0x192
[ 2138.372489] ? per_file_stats+0x43/0x380 [i915]
[ 2138.372502] kasan_report+0xe/0x20
[ 2138.372625] per_file_stats+0x43/0x380 [i915]
[ 2138.372751] ? i915_panel_show+0x110/0x110 [i915]
[ 2138.372761] idr_for_each+0xa7/0x160
[ 2138.372773] ? idr_get_next_ul+0x110/0x110
[ 2138.372782] ? do_raw_spin_lock+0x10a/0x1d0
[ 2138.372923] print_context_stats+0x264/0x510 [i915]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903062133.27360-1-chris@chris-wilson.co.uk
José Roberto de Souza [Wed, 4 Sep 2019 23:02:41 +0000 (16:02 -0700)]
drm/i915/mst: Do not hardcoded the crtcs that encoder can connect
Tiger Lake has up to 4 pipes so the mask would need to be 0xf instead of
0x7. Do not hardcode the mask so it allows the fake MST encoders to
connect to all pipes no matter how many the platform has.
Iterating over all pipes to keep consistent with intel_ddi_init().
Initialy this patch was replaced by commit
4eaceea3a00f ("drm/i915:
Fix DP-MST crtc_mask") but userspace it not correctly using
encoder.possible_crtcs and it was reverted by
commit
e838bfa8e170 ("Revert "drm/i915: Fix DP-MST crtc_mask"")
Userspace should be fixed but it might take a while, so bringing this
patch back for now.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-2-jose.souza@intel.com
José Roberto de Souza [Wed, 4 Sep 2019 23:02:40 +0000 (16:02 -0700)]
drm/i915: Apply FBC WA for TGL too
WA
1409120013 is also valid for TGL, so lets check for ">= 11".
BSpec: 52890
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-1-jose.souza@intel.com
Lucas De Marchi [Wed, 4 Sep 2019 21:34:19 +0000 (14:34 -0700)]
drm/i915/tgl: add gen12 to stolen initialization
Add case for gen == 12 and add MISSING_CASE() for future gens. We were
already handling gen12 as the default, so this doesn't change the
current behavior.
BSpec: 19481 and 44980
Cc: CQ Tang <cq.tang@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-7-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Lucas De Marchi [Wed, 4 Sep 2019 21:34:18 +0000 (14:34 -0700)]
drm/i915/tgl: disable SAGV temporarily
SAGV is not currently working for Tiger Lake. We better disable it until
the implementation is stabilized and we can enable it.
HSDES:
1409542895 2208191909
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-6-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Lucas De Marchi [Wed, 4 Sep 2019 21:34:17 +0000 (14:34 -0700)]
drm/i915/tgl: move DP_TP_* to transcoder
Gen 12 onwards moves the DP_TP_* registers to be transcoder-based rather
than port-based. This adds the new register addresses and changes all
the callers to use the register saved in intel_dp->regs.*. This is
filled out when preparing to enable the port so we take into account if
we should use the transcoder or the port.
v2: reimplement by stashing the registers we want to access under
intel_dp->reg. Now they are initialized when enabling the port.
Ville suggested to store the transcoder to be used exclusively
by TGL+. After implementing I thought just storing the register directly
made it cleaner.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-5-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Lucas De Marchi [Wed, 4 Sep 2019 21:34:16 +0000 (14:34 -0700)]
drm/i915: protect access to DP_TP_* on non-dp
DP_TP_{CTL,STATUS} should only be programmed when the encoder is intel_dp.
Checking its current usages intel_disable_ddi_buf() is the only
offender, with other places being protected by checks like
pipe_config->fec_enable that is only set by intel_dp.
v3 (José):
- Using intel_crtc_has_dp_encoder() instead of intel_encoder_is_dp()
(Ville)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-4-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
José Roberto de Souza [Wed, 4 Sep 2019 21:34:15 +0000 (14:34 -0700)]
drm/i915/tgl: Access the right register when handling PSR interruptions
For older gens PSR IIR and IMR have fixed addresses. From TGL onwards those
registers moved to each transcoder offset. The bits for the registers
are defined without an offset per transcoder as right now we have one
register per transcoder. So add a fake "trans_shift" when calculating
the bits offsets: it will be 0 for gen12+ and psr.transcoder otherwise.
v2 (Lucas): change the implementation to use trans_shift instead of
getting each bit value with a different macro
Cc: Imre Deak <imre.deak@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-3-jose.souza@intel.com
José Roberto de Souza [Wed, 4 Sep 2019 21:34:14 +0000 (14:34 -0700)]
drm/i915/psr: Only handle interruptions of the transcoder in use
It was enabling and checking PSR interruptions in every transcoder
while it should keep the interruptions on the non-used transcoders
masked.
While doing this it gives us trouble on Tiger Lake if we are
reading/writing to registers of disabled transcoders since from gen12
onwards the registers are relative to the transcoder. Instead of forcing
them ON to access those registers, just avoid the accesses as they are
not needed.
v2 (Lucas):
- Explain why we can't keep accessing all transcoders
- Remove TODO about extending the irq handling to multiple instances:
when/if implementing multiple instances it's pretty clear by the
singleton psr that it needs to be extended
- Fix intel_psr_debug_set() calling psr_irq_control() with
psr.transcoder not set yet (from Imre). Now we only set the debug
register right away if psr is already enabled. Otherwise we just
record the value to be set when enabling the source.
- Do not depend on the value of TRANSCODER_A. Just be relative to it
(from Imre)
- handle psr error last so we don't schedule the work before handling
the other flags
v3:
- Adding a warning about setting reserverd bits on EDP_PSR_IMR
Cc: Imre Deak <imre.deak@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-2-jose.souza@intel.com
Daniel Vetter [Tue, 20 Aug 2019 19:54:51 +0000 (21:54 +0200)]
drm/i915: disable set/get_tiling ioctl on gen12+
The cpu (de)tiler hw is gone, this stopped being useful. Plus it never
supported any of the fancy new tiling formats, which means userspace
also stopped using the magic side-channel this provides.
This would totally break a lot of the igts, but they're already broken
for the same reasons as userspace on gen12 would be.
v2: Look at ggtt->num_fences instead, that also avoids the need for a
comment (Chris). This also means that gen12 support really needs to
make sure num_fences is set to 0. There is a patch for that, but it
checks for HAS_MAPPABLE_APERTURE, which I'm not sure is the right
thing really. Adding relevant people.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820195451.15671-1-daniel.vetter@ffwll.ch
Ville Syrjälä [Tue, 3 Sep 2019 15:40:18 +0000 (18:40 +0300)]
Revert "drm/i915: Fix DP-MST crtc_mask"
This reverts commit
4eaceea3a00f8e936a7f48dcd0c975a57f88930f.
Several userspace clients (modesetting ddx and mutter+wayland at least)
handle encoder.possible_crtcs incorrectly. What they essentially do is
the following:
possible_crtcs = ~0;
for_each_possible_encoder(connector)
possible_crtcs &= encoder->possible_crtcs;
Ie. they calculate the intersection of the possible_crtcs
for the connector when they really should be calculating the
union instead.
In our case each MST encoder now has just one unique bit set,
and so the intersection is always zero. The end result is that
MST connectors can't be lit up because no crtc can be found to
drive them.
I've submitted a fix for the modesetting ddx [1], and complained
on #wayland about mutter, so hopefully the situation will improve
in the future. In the meantime we have regression, and so must go
back to the old way of misconfiguring possible_crtcs in the kernel.
[1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277
Cc: Jonas Ådahl <jadahl@gmail.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Chris Wilson [Wed, 4 Sep 2019 10:07:07 +0000 (11:07 +0100)]
drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
This bit was fliped on for "syncing dependencies between camera and
graphics". BSpec has no recollection why, and it is causing
unrecoverable GPU hangs with Vulkan compute workloads.
From BSpec, setting bit5 to 0 enables relaxed padding requirements for
buffers, 1D and 2D non-array, non-MSAA, non-mip-mapped linear surfaces;
and *must* be set to 0h on skl+ to ensure "Out of Bounds" case is
suppressed.
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110998
Fixes:
8424171e135c ("drm/i915/gen9: h/w w/a: syncing dependencies between camera and graphics")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: denys.kostin@globallogic.com
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.1+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904100707.7377-1-chris@chris-wilson.co.uk
Swati Sharma [Tue, 3 Sep 2019 19:22:57 +0000 (00:52 +0530)]
drm/i915/display: Extract glk_read_luts()
For glk, add hw read out to create hw blob of gamma
lut values.
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed glk_get_color_config() to glk_read_luts() [Ville]
-Added degamma validation [Ville]
v9: -80 character limit [Uma]
-Made read func para as const [Ville, Uma]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-8-git-send-email-swati2.sharma@intel.com
Swati Sharma [Tue, 3 Sep 2019 19:22:56 +0000 (00:52 +0530)]
drm/i915/display: Extract ilk_read_luts()
For ilk, add hw read out to create hw blob of gamma
lut values.
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed ilk_get_color_config() to ilk_read_luts() [Ville]
v9: -80 character limit [Uma]
-Made read func para as const [Ville, Uma]
-Renamed ilk_read_gamma_lut() to ilk_read_lut_10() [Uma, Ville]
v10: -Made ilk_read_luts() static [Jani]
-ilk_load_lut_10 has lut_size, not (lut_size - 1) [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-7-git-send-email-swati2.sharma@intel.com
Swati Sharma [Tue, 3 Sep 2019 19:22:55 +0000 (00:52 +0530)]
drm/i915/display: Extract i9xx_read_luts()
For the legacy(gen < 4) gamma, add hw read out to create hw blob of gamma
lut values. Also, add function intel_color_lut_pack to convert hw value
with given bit precision to lut property val.
v4: -No need to initialize *blob [Jani]
-Removed right shifts [Jani]
-Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
function [Ville]
-Renamed function i9xx_get_color_config() to i9xx_read_luts()
-Renamed i9xx_get_config_internal() to i9xx_read_lut_8() [Ville]
v9: -Change in commit message [Jani, Uma]
-Wrap commit within 75 characters [Uma]
-Use macro for 256 [Uma]
-Made read func para as const [Ville, Uma]
v10: -Made i9xx_read_luts() static [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-6-git-send-email-swati2.sharma@intel.com
Swati Sharma [Tue, 3 Sep 2019 19:22:54 +0000 (00:52 +0530)]
drm/i915/display: Add macro to compare gamma hw/sw lut
Add macro to compare hw/sw gamma lut values. First need to
check whether hw/sw gamma mode matches or not. If not
no need to compare lut values, if matches then only compare
lut entries.
v5: -Called PIPE_CONF_CHECK_COLOR_LUT inside if (!adjust) [Jani]
-Added #undef PIPE_CONF_CHECK_COLOR_LUT [Jani]
v8: -Added check for gamma mode before gamma lut entry comparison
[Jani]
-Split patch 3 into 4 patches
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-5-git-send-email-swati2.sharma@intel.com
Swati Sharma [Tue, 3 Sep 2019 19:22:53 +0000 (00:52 +0530)]
drm/i915/display: Add func to compare hw/sw gamma lut
Add func intel_color_lut_equal() to compare hw/sw gamma
lut values. Since hw/sw gamma lut sizes and lut entries comparison
will be different for different gamma modes, add gamma mode dependent
checks.
v3: -Rebase
v4: -Renamed intel_compare_color_lut() to intel_color_lut_equal() [Jani]
-Added the default label above the correct label [Jani]
-Corrected smatch warn "variable dereferenced before check"
[Dan Carpenter]
v5: -Added condition (!blob1 && !blob2) return true [Jani]
v6: -Made patch11 as patch3 [Jani]
v8: -Split patch 3 into 4 patches
-Optimized blob check condition [Ville]
v9: -Exclude spilt gamma mode (bdw and ivb platforms)
as there is exception in way gamma values are written in
hardware [Ville]
-Added exception made in commit [Uma]
-Dropped else, character limit and indentation [Uma]
-Added multi segmented gama mode for icl+ platforms [Uma]
v10: -Dropped multi segmented mode for icl+ platforms [Jani]
-Removed references of sw and hw state in compare code [Jani]
-Dropped inline from func [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-4-git-send-email-swati2.sharma@intel.com
Swati Sharma [Tue, 3 Sep 2019 19:22:51 +0000 (00:52 +0530)]
drm/i915/display: Add func to get gamma bit precision
Each platform supports different gamma modes and each gamma mode
has different bit precision. Here bit precision corresponds
to number of bits the hw LUT supports.
Add func per platform to return bit precision corresponding to gamma mode
which will be later used as a parameter in lut comparison function
intel_color_lut_equal().
This is done for legacy, ilk, glk and their variant platforms.
v6: -Added func intel_color_get_bit_precision() to get bit precision for
gamma and degamma lut readout depending upon platform and
corresponding to load_luts() [Ankit]
-Made patch11 as patch3 [Jani]
v7: -Renamed func intel_color_get_bit_precision() to
intel_color_get_gamma_bit_precision()
-Added separate function/platform for gamma bit precision [Ville]
-Corrected checkpatch warnings
v8: -Split patch 3 into 4 separate patches
v9: -Changed commit message, gave more info [Uma]
-Added precision func for icl+ platform
v10: -Removed precision func for chv and icl+ platforms [Jani]
-Added gamma_enable check once [Jani]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-2-git-send-email-swati2.sharma@intel.com
Swati Sharma [Tue, 3 Sep 2019 19:22:52 +0000 (00:52 +0530)]
drm/i915/display: Add debug log for color parameters
Add debug log for color related parameters like gamma_mode, gamma_enable,
csc_enable, etc inside intel_dump_pipe_config().
v6: -Added debug log for color para in intel_dump_pipe_config [Jani]
v7: -Split patch 3 into 4 patches
v8: -Corrected alignment [Uma]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-3-git-send-email-swati2.sharma@intel.com
Chris Wilson [Mon, 2 Sep 2019 04:02:46 +0000 (05:02 +0100)]
drm/i915: Refresh the errno to vmf_fault translations
It's been a long time since we accidentally reported -EIO upon wedging,
it can now only be generated by failure to swap in a page.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902040303.14195-4-chris@chris-wilson.co.uk
Chris Wilson [Sun, 1 Sep 2019 11:04:31 +0000 (12:04 +0100)]
drm/i915/selftests: Remove unused __engines_name()
This function was never used and probably will never be used, so remove
it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190901110431.12393-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 2 Sep 2019 04:02:47 +0000 (05:02 +0100)]
drm/i915: Replace obj->pin_global with obj->frontbuffer
obj->pin_global was originally used as a means to keep the shrinker off
the active scanout, but we use the vma->pin_count itself for that and
the obj->frontbuffer to delay shrinking active framebuffers. The other
role that obj->pin_global gained was for spotting display objects inside
GEM and working harder to keep those coherent; for which we can again
simply inspect obj->frontbuffer directly.
Coming up next, we will want to manipulate the pin_global counter
outside of the principle locks, so would need to make pin_global atomic.
However, since obj->frontbuffer is already managed atomically, it makes
sense to use that the primary key for display objects instead of having
pin_global.
Ville pointed out the principle difference is that obj->frontbuffer is
set for as long as an intel_framebuffer is attached to an object, but
obj->pin_global was only raised for as long as the object was active. In
practice, this means that we consider the object as being on the scanout
for longer than is strictly required, causing us to be more proactive in
flushing -- though it should be true that we would have flushed
eventually when the back became the front, except that on the flip path
that flush is async but when hit from another ioctl it will be
synchronous.
v2: i915_gem_object_is_framebuffer()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902040303.14195-5-chris@chris-wilson.co.uk
Chris Wilson [Mon, 2 Sep 2019 04:02:44 +0000 (05:02 +0100)]
drm/i915: Report aliasing ppgtt size as ggtt size
The aliasing-ppgtt is constrained to be the same size as the Global GTT
since it aliases the same address space. Simplifying gtt size reporting
in this case.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902040303.14195-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 2 Sep 2019 04:02:43 +0000 (05:02 +0100)]
drm/i915: Restrict the aliasing-ppgtt to the size of the ggtt
The aliasing-ppgtt is not allowed to be smaller than the ggtt, nor
should we advertise it as being any bigger, or else we may get sued for
false advertisement.
Testcase: igt/gem_exec_big
Fixes:
0b718ba1e884 ("drm/i915/gtt: Downgrade Cherryview back to aliasing-ppgtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902040303.14195-1-chris@chris-wilson.co.uk
Ville Syrjälä [Wed, 28 Aug 2019 18:34:24 +0000 (21:34 +0300)]
drm/i915: Clean up HDMI deep color handling a bit
Reogranize the HDMI deep color state computation to just
loop over possible bpc values. Avoids having to maintain
so many variants of the clock etc.
The current code also looks confused w.r.t. port_clock vs.
bw_constrained. It would happily update port_clock for
deep color but then not actually enable deep color due to
bw_constrained being set. The new logic handles that case
correctly.
v2: Pull stuff into separate funcs (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828183424.7856-1-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 30 Aug 2019 18:27:19 +0000 (21:27 +0300)]
drm/i915: Prefer encoder->name over port_name()
enum port is a mess now because it no longer matches the spec
at all. Let's start to dig ourselves out of this hole by
reducing our reliance on port_name(). This should at least make
a bunch of debug messages a bit more sensible while we think how
to fill the the hole properly.
Based on the following cocci script with a lot of manual cleanup
(all the format strings etc.):
@@
expression E;
@@
(
- port_name(E->port)
+ E->base.base.id, E->base.name
|
- port_name(E.port)
+ E.base.base.id, E.base.name
)
@@
enum port P;
expression E;
@@
P = E->port
<...
- port_name(P)
+ E->base.base.id, E->base.name
...>
@@
enum port P;
expression E;
@@
P = E.port
<...
- port_name(P)
+ E.base.base.id, E.base.name
...>
@@
expression E;
@@
{
- enum port P = E;
... when != P
}
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830182719.32608-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Wed, 28 Aug 2019 10:20:59 +0000 (13:20 +0300)]
drm/i915: Limit MST to <= 8bpc once again
My attempt at allowing MST to use the higher color depths has
regressed some configurations. Apparently people have setups
where all MST streams will fit into the DP link with 8bpc but
won't fit with higher color depths.
What we really should be doing is reducing the bpc for all the
streams on the same link until they start to fit. But that requires
a bit more work, so in the meantime let's revert back closer to
the old behavior and limit MST to at most 8bpc.
Cc: stable@vger.kernel.org
Cc: Lyude Paul <lyude@redhat.com>
Tested-by: Geoffrey Bennett <gmux22@gmail.com>
Fixes:
f1477219869c ("drm/i915: Remove the 8bpc shackles from DP MST")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111505
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828102059.2512-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Chris Wilson [Fri, 30 Aug 2019 18:19:29 +0000 (19:19 +0100)]
drm/i915/perf: Assert locking for i915_init_oa_perf_state()
We use the context->pin_mutex to serialise updates to the OA config and
the registers values written into each new context. Document this
relationship and assert we do hold the context->pin_mutex as used by
gen8_configure_all_contexts() to serialise updates to the OA config
itself.
v2: Add a white-lie for when we call intel_gt_resume() from init.
v3: Lie while we have the context pinned inside atomic reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190830181929.18663-1-chris@chris-wilson.co.uk
Matt Roper [Mon, 26 Aug 2019 22:55:40 +0000 (15:55 -0700)]
drm/i915: Add 324mhz and 326.4mhz cdclks for gen11+
The bspec was recently updated with these new cdclk values for ICL, EHL,
and TGL.
Bspec: 20598
Bspec: 49201
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826225540.11987-3-matthew.d.roper@intel.com
Matt Roper [Fri, 30 Aug 2019 00:48:28 +0000 (17:48 -0700)]
drm/i915: Allow /2 CD2X divider on gen11+
The bspec has just recently been updated with new cdclk values that
require the use of a /2 CD2X divider rather than a /1 divider. Once we
add the divider selection logic to ICL+ cdclk programming, we have
pretty much the same logic we were already using on CNL, so it's simpler
to drop icl_set_cdclk() completely and reuse cnl_set_cdclk() on gen11+
platforms as well.
v2:
- Using ICL_CDCLK_CD2X_PIPE_NONE + BXT_CDCLK_CD2X_PIPE(pipe) for TGL is
correct, but looks really confusing. Add some TGL_ macros that alias
these to avoid confusion. (Ville)
- Use DIV_ROUND_CLOSEST rather than / when applying the divider. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830004828.19359-1-matthew.d.roper@intel.com
Maarten Lankhorst [Fri, 30 Aug 2019 10:16:44 +0000 (12:16 +0200)]
drm/i915: Fix regression with crtc disable ordering
When we moved the code to disable crtc's to a separate patch,
we forgot to ensure that for_each_oldnew_intel_crtc_in_state_reverse()
was moved as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes:
66d9cec8a6c9 ("drm/i915/display: Move the commit_tail() disable sequence to separate function")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830101644.8740-1-maarten.lankhorst@linux.intel.com
Chris Wilson [Fri, 30 Aug 2019 18:03:25 +0000 (19:03 +0100)]
drm/i915: Use RCU for unlocked vm_idr lookup
Since i915_address_space is now RCU protected, we can do the vm_idr lookup
without taking the vm_idr_mutex, just with the rcu_read_lock() instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830180325.7755-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 30 Aug 2019 18:00:00 +0000 (19:00 +0100)]
drm/i915: Remove ppgtt->dirty_engines
This is no longer used anywhere and so can be removed. However, tracking
the dirty status on the ppgtt doesn't work very well if the ppgtt is
shared, so perhaps for the best that it is no longer required.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830180000.24608-3-chris@chris-wilson.co.uk
Chris Wilson [Fri, 30 Aug 2019 17:59:59 +0000 (18:59 +0100)]
drm/i915/gtt: Downgrade Cherryview back to aliasing-ppgtt
With the upcoming change in timing (dramatically reducing the latency
between manipulating the ppGTT and execution), no amount of tweaking
could save Cherryview, it would always fail to invalidate its TLB.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830180000.24608-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 30 Aug 2019 17:59:58 +0000 (18:59 +0100)]
drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt
With the upcoming change in timing (dramatically reducing the latency
between manipulating the ppGTT and execution), no amount of tweaking
could save Baytrail, it would always fail to invalidate its TLB. Ville
was right, Baytrail is beyond hope.
v2: Rollback on all gen7; same timing instability on TLB invalidation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830180000.24608-1-chris@chris-wilson.co.uk
Lucas De Marchi [Thu, 29 Aug 2019 21:15:26 +0000 (14:15 -0700)]
drm/i915: unify icp, tgp and mcc irq setup
Use a single function to setup the SDE irq and make MCC, ICP and TGP use
it, just like was done for the irq handler.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-4-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Lucas De Marchi [Thu, 29 Aug 2019 21:15:25 +0000 (14:15 -0700)]
drm/i915: parameterize SDE hotplug registers
Ice Lake, Tiger Lake and Elkhart Lake all have different port
configurations and all of them can be parameterized the same way to form
the SDE hotplug bitmask. Avoid making them a special case an just use
the parameterized macros.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-3-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Lucas De Marchi [Thu, 29 Aug 2019 21:15:24 +0000 (14:15 -0700)]
drm/i915: unify icp, tgp and mcc irq handling
The differences are only on the pins, trigger and long_detect function.
The MCC handling is already partially merged, so merge TGP as well.
Remove the pins argument from icp_irq_handler() so we have all the
differences between the 3 set in a common if ladder.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-2-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Lucas De Marchi [Thu, 29 Aug 2019 21:15:23 +0000 (14:15 -0700)]
drm/i915: parameterize south hpd macros
South, follow the north.
Instead of defining separate macros for each port, make them take port
as parameter as done for TC ports and for north engine. This will allow
us to easily extend this as needed.
tgp_ddi_port_hotplug_long_detect() is also removed as after the EHL
introduction the tgp variant is an exact copy of icp.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829211526.30525-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Joonas Lahtinen [Fri, 30 Aug 2019 08:58:49 +0000 (11:58 +0300)]
drm/i915: Indent GuC/WOPCM documentation sections
Indent GuC/WOPCM documentation correctly to reside under
"Memory Management and Command Submission" section to avoid
it escaping to the upper level navigation.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830085849.12519-2-joonas.lahtinen@linux.intel.com
Joonas Lahtinen [Fri, 30 Aug 2019 08:58:48 +0000 (11:58 +0300)]
drm/i915: Remove link to missing "Batchbuffer Pools" documentation
The referenced documentation section has been removed. Remove the
link to avoid warning when building the documentation.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830085849.12519-1-joonas.lahtinen@linux.intel.com
Ramalingam C [Wed, 28 Aug 2019 16:42:16 +0000 (22:12 +0530)]
drm/i915/hdcp: Enable HDCP 1.4 and 2.2 on Gen12+
>From Gen12 onwards, HDCP HW block is implemented within transcoders.
Till Gen11 HDCP HW block was part of DDI.
Hence required changes in HW programming is handled here.
As ME FW needs the transcoder detail on which HDCP is enabled
on Gen12+ platform, we are populating the detail in hdcp_port_data.
v2:
_MMIO_TRANS is used [Lucas and Daniel]
platform check is moved into the caller [Lucas]
v3:
platform check is moved into a macro [Shashank]
v4:
Few optimizations in the coding [Shashank]
v5:
Fixed alignment in macro definition in i915_reg.h [Shashank]
unused variables "reg" is removed.
v6:
Configuring the transcoder at compute_config.
transcoder is used instead of pipe in macros.
Rebased.
v7:
transcoder is cached at intel_hdcp
hdcp_port_data is configured with transcoder index asper ME FW.
v8:
s/trans/cpu_transcoder
s/tc/cpu_transcoder
v9:
rep_ctl is prepared for TCD too.
return moved into deault of rep_ctl prepare function [Shashank]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-7-ramalingam.c@intel.com
Ramalingam C [Wed, 28 Aug 2019 16:42:15 +0000 (22:12 +0530)]
drm/i915/hdcp: update current transcoder into intel_hdcp
On gen12+ platforms, HDCP HW is associated to the transcoder.
Hence on every modeset update associated transcoder into the
intel_hdcp of the port.
v2:
s/trans/cpu_transcoder [Jani]
v3:
comment is added for fw_ddi init for gen12+ [Shashank]
only hdcp capable transcoder is translated into fw_tc [Shashank]
v4:
fw_tc initialization is kept for modeset. [Tomas]
few extra doc is added at port_data init [Tomas]
v5:
Few comments are improvised [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-6-ramalingam.c@intel.com
Ramalingam C [Wed, 28 Aug 2019 16:42:14 +0000 (22:12 +0530)]
misc/mei/hdcp: Fill transcoder index in port info
For gen12+ platform we need to pass the transcoder info
as part of the port info into ME FW.
This change fills the payload for ME FW from hdcp_port_data.
v2:
Doc is enhanced for physical_port and attached_transcoder [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-5-ramalingam.c@intel.com
Ramalingam C [Wed, 28 Aug 2019 16:42:13 +0000 (22:12 +0530)]
drm: Extend I915 mei interface for transcoder info
I915 needs to send the index of the transcoder as per ME FW.
To support this, define enum mei_fw_tc and add as a member into
the struct hdcp_port_data.
v2:
Typo in commit msg is fixed [Shashank]
v3:
kdoc is added for mei_fw_tc [Tomas]
s/MEI_TC_x/MEI_TRANSCODER_x
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-4-ramalingam.c@intel.com
Ramalingam C [Wed, 28 Aug 2019 16:42:12 +0000 (22:12 +0530)]
drm: Move port definition back to i915 header
We dont need the definition of the enum port outside I915, anymore.
Hence move enum port definition into I915 driver itself.
v2:
intel_display.h is included in intel_hdcp.h
v3:
enum port is declared in headers.
v4:
commit msg is rephrased.
v5:
copyright year is updated [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-3-ramalingam.c@intel.com
Ramalingam C [Wed, 28 Aug 2019 16:42:11 +0000 (22:12 +0530)]
drm/i915: mei_hdcp: I915 sends ddi index as per ME FW
I915 converts it's port value into ddi index defiend by ME FW
and pass it as a member of hdcp_port_data structure.
Hence expose the enum mei_fw_ddi to I915 through
i915_mei_interface.h.
v2:
Copyright years are bumped [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-2-ramalingam.c@intel.com
Chris Wilson [Thu, 29 Aug 2019 08:11:15 +0000 (09:11 +0100)]
drm/i915/execlists: Try rearranging breadcrumb flush
The addition of the DC_FLUSH failed to ensure sanctity of the post-sync
write as CI immediately got a completion CS-event before the breadcrumb
was coherent. So let's try the other idea of moving the post-sync write
into the CS_STALL.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111514
References:
e8f6b4952ec5 ("drm/i915/execlists: Flush the post-sync breadcrumb write harder")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829081150.10271-2-chris@chris-wilson.co.uk
Manasi Navare [Wed, 28 Aug 2019 22:47:01 +0000 (15:47 -0700)]
drm/i915/display: Move the commit_tail() disable sequence to separate function
Create a new function intel_commit_modeset_disables() consistent
with the naming in drm atomic helpers and similar to the enable function.
This helps better organize the disable sequence in atomic_commit_tail()
No functional change
v4:
* Do not create a function pointer, just a function (Maarten)
v3:
* Rebase (Manasi)
v2:
* Create a helper for old_crtc_state disables (Lucas)
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828224701.422-1-manasi.d.navare@intel.com
Manasi Navare [Tue, 27 Aug 2019 22:17:34 +0000 (15:17 -0700)]
drm/i915/display: Rename update_crtcs() to commit_modeset_enables()
This patch has no functional changes. This just renames the update_crtcs()
hooks to commit_modeset_enables() to match the drm_atomic helper naming
conventions.
v2:
* Rebase on drm-tip
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827221735.29351-2-manasi.d.navare@intel.com
Matthew Auld [Thu, 29 Aug 2019 20:19:19 +0000 (21:19 +0100)]
drm/i915: s/for_each_sgt_dma/for_each_sgt_daddr/
The sg_table for our backing store might contain addresses from
stolen-memory or in the future local-memory, at which point this is no
longer a dma-iterator. As a consequence we should now break on NULL
iter.sgp, instead of dmap == 0 which is considered an invalid dma
address.
As a bonus, gcc much prefers this construct,
Function old new delta
gen8_ggtt_insert_entries 211 192 -19
gen6_ggtt_insert_entries 292 262 -30
i915_error_object_create 996 954 -42
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829201919.21493-1-matthew.auld@intel.com
Fernando Pacheco [Thu, 29 Aug 2019 17:41:53 +0000 (10:41 -0700)]
drm/i915/uc: Extract common code from GuC stop/disable comm
During normal driver unload we attempt to disable GuC communication
while it is currently stopped. This results in a nop'd call to
intel_guc_ct_disable within guc_disable_communication because
stop/disable rely on the same flag to prevent further comms with CT.
We can avoid the call to disable and still leave communication in a
satisfactory state by extracting a set of shared steps from stop/disable.
This set can include guc_disable_interrupts as we do not require the
single caller of guc_stop_communication to be atomic:
"drm/i915/selftests: Fixup atomic reset checking".
This situation (stop -> disable) only occurs during intel_uc_fini_hw,
so during fini, call guc_disable_communication only if currently enabled.
The symmetric calls to enable/disable remain unmodified for all other
scenarios.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110943
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829174154.14675-1-fernando.pacheco@intel.com
Chris Wilson [Thu, 29 Aug 2019 17:08:48 +0000 (18:08 +0100)]
drm/i915/selftests: cond_resched() within the longer buddy tests
Let the scheduler have a breather in between passes of the longer buddy
tests. Important if we are running under kasan etc and this takes far
longer than usual!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829170848.969-1-chris@chris-wilson.co.uk
José Roberto de Souza [Fri, 23 Aug 2019 08:20:39 +0000 (01:20 -0700)]
drm/i915/tgl: PSR link standby is not supported anymore
According to BSpc if link standby is set on TGL+, PSR will not be
enabled. Vendors should not use panels that requires link standby and
even if they do, panel should assert a PSR error that will cause PSR to
be disabled.
BSpec: 50434
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-8-lucas.demarchi@intel.com