OSDN Git Service
Kevin Hilman [Wed, 22 Jan 2014 00:55:05 +0000 (16:55 -0800)]
Merge tag 'bcm-for-3.14-dt' of git://github.com/broadcom/bcm11351 into next/dt
From Christian Daudt:
Add i2c, usb and clock DT configuration to bcm mobile.
* tag 'bcm-for-3.14-dt' of git://github.com/broadcom/bcm11351: (697 commits)
clk: bcm281xx: define kona clock binding
ARM: dts: add usb udc support to bcm281xx
ARM: dts: Specify clocks for timer on bcm11351
Documentation: dt: kona-timer: Add clocks property
ARM: dts: Specify clocks for SDHCIs on bcm11351
Documentation: dt: kona-sdhci: Add clocks property
ARM: dts: Specify clocks for UARTs on bcm11351
ARM: dts: bcm281xx: Add i2c busses
ARM: dts: Declare clocks as fixed on bcm11351
ARM: dts: bcm28155-ap: Enable all the i2c busses
+Linux 3.13-rc5
...
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Thu, 16 Jan 2014 21:42:17 +0000 (13:42 -0800)]
Merge tag 'davinci-for-v3.14/dt' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/dt
From Sekhar Nori:
DaVinci device tree file updates to add GPIO
support.
* tag 'davinci-for-v3.14/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da850 evm: add GPIO pinumux entries DT node
ARM: davinci: da850: add GPIO DT node
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Wed, 15 Jan 2014 00:18:35 +0000 (16:18 -0800)]
Merge tag 'sirf-dts-for-3.14' of git://git./linux/kernel/git/baohua/linux into next/dt
ARM: sirf: dts update for 3.14
From Barry Song:
some missed dt nodes or props for sirf dts for 3.14.
Among them:
- add lost clocks for cphifbg
- add lost bus_width, clock and status for sdhci
- add clock, frequence-voltage table for CPU0
- add lost minigpsrtc device node
- add lost usp1_uart_nostreamctrl pin group for atlas6
- add pin group for USP0 with only RX or TX frame sync
* tag 'sirf-dts-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
ARM: dts: sirf: add lost minigpsrtc device node
ARM: dts: sirf: add clock, frequence-voltage table for CPU0
ARM: dts: sirf: add lost bus_width, clock and status for sdhci
ARM: dts: sirf: add lost clocks for cphifbg
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Wed, 15 Jan 2014 00:17:41 +0000 (16:17 -0800)]
Merge tag 'socfpga-dt-for-3.14' of git://git.rocketboards.org/linux-socfpga-next into next/dt
From Dinh Nguyen:
SOCFPGA DT updates for v3.14
* tag 'socfpga-dt-for-3.14' of git://git.rocketboards.org/linux-socfpga-next:
ARM: dts: socfpga: add pl330 clock
ARM: dts: socfpga: update L2 tag and data latency
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Wed, 15 Jan 2014 00:16:51 +0000 (16:16 -0800)]
Merge tag 'sunxi-dt-for-3.14-2' of https://github.com/mripard/linux into next/dt
From Maxime Ripard:
Second round of DT additions for 3.14
Mostly:
- Addition of the missing PLLs and module clocks
- Addition of the external clocks
- Addition of the touchscreen controler
- I2C nodes of the Cubietruck
* tag 'sunxi-dt-for-3.14-2' of https://github.com/mripard/linux:
arm: sun7i: cubietruck: Enable the i2c controllers
ARM: dts: sun7i: external clock outputs
ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
ARM: dts: sun7i: Add pin muxing options for clock outputs
ARM: dts: sun7i: Add rtp controller node
ARM: dts: sun5i: Add rtp controller node
ARM: dts: sun4i: Add rtp controller node
ARM: sun4i: dt: Remove chosen nodes
ARM: sun4i: dt: Move the aliases to the DTSI
ARM: sunxi: dt: add nodes for the mbus clock
ARM: sun7i: dt: mod0 clocks
ARM: sun5i: dt: mod0 clocks
ARM: sun4i: dt: mod0 clocks
ARM: sunxi: add PLL5 and PLL6 support
ARM: sunxi: add PLL4 support
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Rongjun Ying [Fri, 3 Jan 2014 02:59:26 +0000 (10:59 +0800)]
ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
add pin groups for USP0 only holding one of TX and RX frame sync. this
patch matches with the change in drivers/pinctrl/sirf.
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Barry Song <Barry.Song@csr.com>
Qipan Li [Fri, 3 Jan 2014 02:59:23 +0000 (10:59 +0800)]
ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
this patch adds lost usp1_uart_nostreamctrl pin group for atlas6, which
matches with the change in drivers/pinctrl/sirf/pinctrl-atlas6.c.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Xianglong Du [Thu, 9 Jan 2014 04:23:09 +0000 (12:23 +0800)]
ARM: dts: sirf: add lost minigpsrtc device node
This patch adds lost minigpsrtc device node for prima2 and atlas6,
which is behind rtc-iobg and whose offset is 2000.
Signed-off-by: Xianglong Du <Xianglong.Du@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Rongjun Ying [Thu, 9 Jan 2014 04:14:37 +0000 (12:14 +0800)]
ARM: dts: sirf: add clock, frequence-voltage table for CPU0
prima2 and atlas6 uses cpufreq_cpu0, here we put related clock, operation
points in dtsi.
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Bin Shi [Thu, 9 Jan 2014 04:08:46 +0000 (12:08 +0800)]
ARM: dts: sirf: add lost bus_width, clock and status for sdhci
some nodes missed bus_width, clocks and status properties, here we fix them
in prima2 and atlas6 dtsi.
Signed-off-by: Bin Shi <Bin.Shi@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Barry Song [Thu, 9 Jan 2014 04:02:53 +0000 (12:02 +0800)]
ARM: dts: sirf: add lost clocks for cphifbg
This patch adds lost clocks property(index 42) for cphifbg node in prima2 and
atlas6 dtsi.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Olof Johansson [Thu, 9 Jan 2014 06:09:14 +0000 (22:09 -0800)]
Merge tag 'ux500-devicetree-v3.14-2' of git://git./linux/kernel/git/linusw/linux-stericsson into next/dt
From Linus Walleij:
Ux500 device tree patches for v3.14, take 2
- Delete some unused U8540 UART platform data.
- MMC/SD-fixes from Ulf Hansson so everything works with
the device tree again.
* tag 'ux500-devicetree-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: regulators: Remove dead code for SD-card regulator
ARM: ux500: Configure regulator for I/O voltage for SD-card slot
ARM: ux500: Refactor common DT configs for sdi[n] devices
ARM: ux500: delete U8540 UART auxdata
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 9 Jan 2014 06:08:01 +0000 (22:08 -0800)]
Merge tag 'renesas-dt-fixes-for-v3.14' of git://git./linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Renesas ARM Based SoC DT Fixes for v3.14
Revert the addition of SSI clocks to DT for the
r8a7790 (R-Car H2) and r8a7791 (R-Car M2) SoCs.
Unfortunately these patches prevent booting the
r8a7790-based Lager board and r8a7791-based Koelsch board
to the point where a serial output is available.
A solution to this problem is being sought but has not
yet been finalised so in the mean time revert the changes.
* tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"
Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree"
Signed-off-by: Olof Johansson <olof@lixom.net>
Steffen Trumtrar [Wed, 8 Jan 2014 18:01:26 +0000 (12:01 -0600)]
ARM: dts: socfpga: add pl330 clock
The pl330 dmac won't be added to the list of amba devices, as it doesn't have
a clock entry.
Add the clock.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Dinh Nguyen [Tue, 7 Jan 2014 02:54:43 +0000 (20:54 -0600)]
ARM: dts: socfpga: update L2 tag and data latency
Sets the appropriate L2-cache latencies for the SOCFPGA platform.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Chen-Yu Tsai [Mon, 6 Jan 2014 05:58:12 +0000 (13:58 +0800)]
arm: sun7i: cubietruck: Enable the i2c controllers
The Cubietruck makes use of the first three i2c controllers found on the
Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on
the board headers, and i2c-2 is used for DDC on the VGA connector. This
patch enables them in the device tree.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Olof Johansson [Sat, 4 Jan 2014 19:43:53 +0000 (11:43 -0800)]
Merge tag 'samsung-dt-3' of git://git./linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
Samsung DT 3rd updates for v3.14
- add exynos4412-tiny4412 board dt for FriendlyARM's TINY4412
board including initial support UART, SD card and LEDs
- add exynos5420-arndale-octa board dt for Arndale Octa board
* tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: add support for EXYNOS4412 based TINY4412 board
ARM: dts: Add initial support for Arndale Octa board
Signed-off-by: Olof Johansson <olof@lixom.net>
Alex Ling [Wed, 18 Dec 2013 20:34:26 +0000 (05:34 +0900)]
ARM: dts: add support for EXYNOS4412 based TINY4412 board
Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
TINY4412 board. This patch including support peripherals like
UART, SD card on SDMMC2 port and GPIO connected LEDs.
Signed-off-by: Alex Ling <kasimling@gmail.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sachin Kamat [Wed, 11 Dec 2013 22:32:39 +0000 (07:32 +0900)]
ARM: dts: Add initial support for Arndale Octa board
Arndale Octa board is based on Exynos5420 SoC. This patch
adds the basic support required for booting it through DT.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Olof Johansson [Sat, 4 Jan 2014 05:09:51 +0000 (21:09 -0800)]
Merge tag 'renesas-dt3-for-v3.14' of git://git./linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Third Round of Renesas ARM Based SoC DT Updates for v3.14
* r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs
- Add SSI, QSPI and MSIOF clocks in device tree
r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards
- Remove reference DTS
- Specify external clock frequency in DT
- Sync non-reference DTS with referene DTS
- Add clocks to DTS
* r8a7740 (R-Mobile A1) based Armadillo board
- Add gpio-keys device
- Add PWM backlight enable GPIO
- Add PWM backlight power supply
* r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and
r8a73a4 (SH-Mobile APE6) SoCs
- Specify PFC interrupts in DT
* tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits)
ARM: shmobile: r8a7791: Add SSI clocks in device tree
ARM: shmobile: r8a7790: Add SSI clocks in device tree
ARM: shmobile: r8a7791: Add QSPI module clock in device tree
ARM: shmobile: r8a7790: Add QSPI module clock in device tree
ARM: shmobile: r8a7791: Add MSIOF clocks in device tree
ARM: shmobile: r8a7790: Add MSIOF clocks in device tree
ARM: shmobile: Remove Koelsch reference DTS
ARM: shmobile: Remove Lager reference DTS
ARM: shmobile: koelsch: Specify external clock frequency in DT
ARM: shmobile: lager: Specify external clock frequency in DT
ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS
ARM: shmobile: Sync Lager DTS with Lager reference DTS
ARM: shmobile: r8a7791: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: armadillo: dts: Add gpio-keys device
ARM: shmobile: sh73a0: Specify PFC interrupts in DT
ARM: shmobile: r8a7740: Specify PFC interrupts in DT
ARM: shmobile: r8a73a4: Specify PFC interrupts in DT
ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Warren [Fri, 27 Dec 2013 02:43:10 +0000 (19:43 -0700)]
ARM: bcm2835: add USB controller to device tree
The BCM2835 SoC contains a DWC2 USB controller. Add this to the DT.
Set up the pin controller to fully enable the USB controller on the
Raspberry Pi. The GPIO setup works because the default output value for
GPIO 6 (LAN_RUN/n_reset) just happens to be 1, which enables the
USB/LAN chip.
Note that you'll need a U-Boot which enables power to the USB controller;
search for U-Boot patch "ARM: rpi_b: power on SDHCI and USB HW modules".
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 2 Jan 2014 20:05:13 +0000 (12:05 -0800)]
Merge tag 'sunxi-dt-for-3.14' of https://github.com/mripard/linux into next/dt
From Maxime Ripard:
Allwinner sunXi DT Additions for 3.14
Various DT related patches, but mostly:
- Support for the Olimex A13-olinuxino-micro
- Added the needed IP in the A31 for the HS timer support and SMP bringup
- A10 and A20 RTC
* tag 'sunxi-dt-for-3.14' of https://github.com/mripard/linux:
ARM: sun6i: dt: Add IP needed to bring up the additional cores
ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
ARM: sun6i: Add the reset controller to the DTSI
ARM: sunxi: dt: add EMAC aliases
ARM: dts: sun4i/sun7i: add RTC node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 2 Jan 2014 19:17:05 +0000 (11:17 -0800)]
Merge tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu into next/dt
From Jason Cooper:
mvebu DT changes for v3.14 (incremental #5)
- mvebu
- add rtc chip isl12057 node to ReadyNAS boards
- fix register length in Armada XP pmsu
- kirkwood
- sort ocp nodes by address in 6282 dtsi file
- add 6192 dtsi file
- add LaPlug board
- add sata phy node
- dove
- add sata phy node
* tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu:
ARM: Kirkwood: DT board setup for LaPlug
ARM: Kirkwood: Add 6192 DTSI file
ARM: mvebu: fix register length for Armada XP PMSU
ARM: kirkwood: 6282: sort DT nodes by address
Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 2 Jan 2014 18:23:58 +0000 (10:23 -0800)]
Merge branch 'qcom/dt' into next/dt
* qcom/dt:
ARM: dts: MSM8974: Add MMIO architected timer node
ARM: dts: MSM8974: Add restart node
ARM: msm: Simplify ARCH_MSM_DT config
ARM: msm: Add support for MSM8974 SoC
ARM: msm: trout: fix uninit var warning
Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Boyd [Fri, 20 Dec 2013 19:09:19 +0000 (11:09 -0800)]
ARM: dts: MSM8974: Add MMIO architected timer node
Add the mmio architected timer node.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Boyd [Fri, 20 Dec 2013 19:09:18 +0000 (11:09 -0800)]
ARM: dts: MSM8974: Add restart node
Add the restart node so we can reboot the device.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Boyd [Fri, 20 Dec 2013 19:09:17 +0000 (11:09 -0800)]
ARM: msm: Simplify ARCH_MSM_DT config
This doesn't need to be a def_bool y. Instead we can have every
DT supported platform select ARCH_MSM_DT and we achieve the same
thing with less chance of conflicts.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rohit Vaswani [Fri, 20 Dec 2013 19:09:15 +0000 (11:09 -0800)]
ARM: msm: Add support for MSM8974 SoC
Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard
and others. Board support added in separate patch.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
[olof: split off SoC support in separate patch]
Signed-off-by: Olof Johansson <olof@lixom.net>
Josh Cartwright [Fri, 20 Dec 2013 19:09:14 +0000 (11:09 -0800)]
ARM: msm: trout: fix uninit var warning
Fix the following warning when !CONFIG_MMC:
arch/arm/mach-msm/board-trout.c: In function 'trout_init':
arch/arm/mach-msm/board-trout.c:67:6: warning: unused variable 'rc' [-Wunused-variable]
int rc;
^
Also, while we're here, rework explicit printk(KERN_CRIT..) to use
pr_crit.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Chen-Yu Tsai [Wed, 1 Jan 2014 02:30:48 +0000 (10:30 +0800)]
ARM: dts: sun7i: external clock outputs
This commit adds the two external clock outputs available on A20 to
its device tree. A dummy fixed factor clock is also added to serve as
the first input of the clock outputs, which according to AW's A20 user
manual, is the 24MHz oscillator divided by 750.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Wed, 1 Jan 2014 02:30:47 +0000 (10:30 +0800)]
ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
Device tree naming conventions state that node names should match
the nodes function. Change external low speed oscillator node name
to match.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Wed, 1 Jan 2014 02:30:50 +0000 (10:30 +0800)]
ARM: dts: sun7i: Add pin muxing options for clock outputs
This patch adds the clock output pin options on the A20.
The 2 pins can output a configurable clock to be used by
external modules. This is used on the CubieTruck, to supply
a 32768 Hz low power clock to the onboard Wifi+BT module.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Tue, 31 Dec 2013 16:20:52 +0000 (17:20 +0100)]
ARM: dts: sun7i: Add rtp controller node
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Tue, 31 Dec 2013 16:20:51 +0000 (17:20 +0100)]
ARM: dts: sun5i: Add rtp controller node
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Tue, 31 Dec 2013 16:20:50 +0000 (17:20 +0100)]
ARM: dts: sun4i: Add rtp controller node
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Alex Elder [Fri, 22 Nov 2013 18:44:32 +0000 (12:44 -0600)]
clk: bcm281xx: define kona clock binding
Document the device tree binding for Broadcom Kona architecture
clock control units and clocks. Kona device nodes are represented
with compatible strings having "bcm11351" in their name.
Kona clocks are managed by "clock control units" (CCUs). Each CCU
has a device tree node, and within that node are defined the names
of the clocks provided by the CCU.
The BCM281xx family of SoCs use Kona CCUs and clocks.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Maxime Ripard [Sun, 17 Nov 2013 09:05:22 +0000 (10:05 +0100)]
ARM: sun4i: dt: Remove chosen nodes
The chosen nodes are nowadays pretty useless, since they will be overriden by
the bootloader anyway.
We can thus safely remove them.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Sun, 17 Nov 2013 09:03:04 +0000 (10:03 +0100)]
ARM: sun4i: dt: Move the aliases to the DTSI
The aliases are shared across boards are really belong to the DTSI.
Move them there.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Sun, 29 Dec 2013 21:31:53 +0000 (22:31 +0100)]
Merge tag 'sunxi-clk-3.14-for-maxime' of https://bitbucket.org/emiliolopez/linux into sunxi/dt-for-3.14
Allwinner sunXi SoCs DT changes for clocks
This contains the DT parts of the "[PATCH v3 00/13] clk: sunxi: add PLL5
and PLL6 support" series. It adds DT nodes for PLL4/5/6 and mod0 clocks
on most sunxi platforms.
Olof Johansson [Sun, 29 Dec 2013 21:19:25 +0000 (13:19 -0800)]
Merge tag 'renesas-dt2-for-v3.14' of git://git./linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Second Round of Renesas ARM Based SoC DT Updates for v3.13
* r8a7791 (R-Car M2) based Koelsch board
- Add GPIO keys
* sh73a0 (SH-Mobile AG5) based kzm9g board
- Add FSI support
* tag 'renesas-dt2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: koelsch: dts: Add gpio-keys device
ARM: shmobile: kzm9g: add FSI support for DTS
ARM: shmobile: sh73a0: add FSI support via DTSI
Signed-off-by: Olof Johansson <olof@lixom.net>
Emilio López [Mon, 23 Dec 2013 03:32:44 +0000 (00:32 -0300)]
ARM: sunxi: dt: add nodes for the mbus clock
mbus is the memory bus clock, and it is present on both sun5i and sun7i
machines. Its register layout is compatible with the mod0 one.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Emilio López [Mon, 23 Dec 2013 03:32:43 +0000 (00:32 -0300)]
ARM: sun7i: dt: mod0 clocks
This commit adds all the mod0 clocks available on A20 to its device
tree. This list was created by looking at AW's code release.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Emilio López [Mon, 23 Dec 2013 03:32:42 +0000 (00:32 -0300)]
ARM: sun5i: dt: mod0 clocks
This commit adds all the mod0 clocks available on A10 and A13. The list
has been constructed by looking at the Allwinner code release for A10S
and A13.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Emilio López [Mon, 23 Dec 2013 03:32:41 +0000 (00:32 -0300)]
ARM: sun4i: dt: mod0 clocks
This commit adds all the mod0 clocks present on sun4i to its device tree
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Emilio López [Mon, 23 Dec 2013 03:32:38 +0000 (00:32 -0300)]
ARM: sunxi: add PLL5 and PLL6 support
This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i
device trees.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Emilio López [Mon, 23 Dec 2013 03:32:35 +0000 (00:32 -0300)]
ARM: sunxi: add PLL4 support
This commit adds the PLL4 definition to the sun4i, sun5i and sun7i
device trees. PLL4 is compatible with PLL1.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Olof Johansson [Fri, 27 Dec 2013 21:09:58 +0000 (13:09 -0800)]
Merge tag 'tegra-for-3.14-dt-2' of git://git./linux/kernel/git/tegra/linux into next/dt
From Stephen Warren:
ARM: tegra: second set of device tree changes
This branch contains changes to Tegra's device tree that came in after
I sent the previous pull-request/tag tegra-for-3.14-dt. Changes are:
* Set up aliases for RTCs, so that the correct RTC is chosen to
initialize the system date/time.
* Venice2 pinctrl and regulator configuration.
* Built-in panel enablement for Harmony, Cardhu, Dalmore.
* HDMI enablement for Dalmore.
* USB2 port enablement for Beaver.
* Keyboard and power key enablement for Venice2.
* tag 'tegra-for-3.14-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable power key on Venice2
ARM: tegra: Enable Venice2 keyboard
ARM: tegra: enable USB2 on Tegra30 Beaver
ARM: tegra: modify Tegra30 USB2 default phy_type to UTMI
ARM: tegra: Enable HDMI support on Dalmore
ARM: tegra: Enable DSI support on Dalmore
ARM: tegra: Add Tegra114 gr3d support
ARM: tegra: Add Tegra114 gr2d support
ARM: tegra: Add Tegra114 DSI support
ARM: tegra: Add host1x, DC and HDMI to Tegra114 device tree
ARM: tegra: Add MIPI calibration DT entries for Tegra114
ARM: tegra: Enable LVDS on Cardhu
ARM: tegra: Enable LVDS on Harmony
ARM: tegra: set up /aliases for RTCs on Venice2
ARM: tegra: add ams AS3722 device to Venice2 DT
ARM: tegra: fix missing pincontrol configuration for Venice2
ARM: tegra: set up /aliases entries for RTCs
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 26 Dec 2013 19:03:50 +0000 (11:03 -0800)]
Merge tag 'tegra-for-3.14-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
From Stephen Warren:
ARM: tegra: device tree changes
This branch contains all the changes to Tegra's device tree. The
highlights are:
* Many patches for Tegra124 SoC support, and the Venice2 board which
uses that SoC.
* Conversion to use more headers providing named constants for pinctrl
and key codes, which improves readability.
* A few cleanups.
This branch is based on tag tegra-for-3.14-dmas-resets-rework in order
to avoid conflicts with the DT changes required to use the common
bindings for DMAs and resets.
* tag 'tegra-for-3.14-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (24 commits)
ARM: tegra: Add SPI controller nodes for Tegra124
ARM: tegra: Fix misconfiguration of pin PH2 on Venice2
ARM: tegra: fix pinctrl misconfiguration on Venice2
ARM: tegra: add default pinctrl nodes for Venice2
ARM: tegra: correct Colibri T20 regulator settings
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines
ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
ARM: tegra: convert dts files of Tegra114 platforms to use pinctrl defines
ARM: tegra: Add header file for pinctrl constants
ARM: tegra: convert device tree files to use key defines
ARM: tegra: Enable PWM on Venice2
ARM: tegra: Add Tegra124 PWM support
ARM: tegra: add sound card to Venice2 DT
ARM: tegra: add audio-related device to Tegra124 DT
ARM: tegra: enable I2C controllers on Venice2
ARM: tegra: add I2C controllers to Tegra124 DT
ARM: tegra: add MMC controllers to Tegra124 DT
ARM: tegra: add Tegra124 pinmux node to DT
ARM: tegra: add APB DMA controller to Tegra124 DT
ARM: tegra: add reset properties to Tegra124 DTs
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 26 Dec 2013 19:03:29 +0000 (11:03 -0800)]
Merge branch 'tegra/dma-reset-rework' into next/dt
Bringing in the tegra dma/reset framework cleanup as a base for the DT changes.
* tegra/dma-reset-rework: (320 commits)
spi: tegra: checking for ERR_PTR instead of NULL
ASoC: tegra: update module reset list for Tegra124
clk: tegra: remove bogus PCIE_XCLK
clk: tegra: remove legacy reset APIs
ARM: tegra: remove legacy DMA entries from DT
ARM: tegra: remove legacy clock entries from DT
USB: EHCI: tegra: use reset framework
Input: tegra-kbc - use reset framework
serial: tegra: convert to standard DMA DT bindings
serial: tegra: use reset framework
spi: tegra: convert to standard DMA DT bindings
spi: tegra: use reset framework
staging: nvec: use reset framework
i2c: tegra: use reset framework
ASoC: tegra: convert to standard DMA DT bindings
ASoC: tegra: allocate AHUB FIFO during probe() not startup()
ASoC: tegra: call pm_runtime APIs around register accesses
ASoC: tegra: use reset framework
dma: tegra: register as an OF DMA controller
dma: tegra: use reset framework
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Simon Horman [Thu, 26 Dec 2013 05:16:54 +0000 (14:16 +0900)]
Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"
This reverts commit
b652896b02df3dfde3a68957cce01f2aa4585842.
Unfortunately this commit prevents multiplatform from booting to
the point where a serial console is available. Revert it while
a solution is sought.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Thu, 26 Dec 2013 05:15:47 +0000 (14:15 +0900)]
Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree"
This reverts commit
6dea2c1ebc6fc43852fd6125d75a75da223ff707.
Unfortunately this commit prevents multiplatform from booting to
the point where a serial console is available. Revert it while
a solution is sought.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Maxime Hadjinlian [Tue, 24 Dec 2013 12:53:19 +0000 (13:53 +0100)]
ARM: Kirkwood: DT board setup for LaPlug
This patch adds DT board setup for the LaCie NAS LaPlug.
Chipset list:
- CPU MARVELL 88FR131 800Mhz
- SDRAM memory: 128MB DDR2-800 400Mhz
- 1 Ethernet Gigabit port (PHY MARVELL
88E1318)
- 1 Mini PCI-Express port
- 1 NAND 512 MB
- 1 push button
- 2 LEDs (red and blue)
- 4 USB Ports
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Maxime Hadjinlian [Tue, 24 Dec 2013 12:53:18 +0000 (13:53 +0100)]
ARM: Kirkwood: Add 6192 DTSI file
This file is mainly a copy of kirkwood-6281.dtsi.
The pinctrl seems to be the same.
These platforms differs only with their CPU, memory capabilities and the
number of GPIO available (36 on 6192, 50 on 6281).
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Mon, 23 Dec 2013 08:48:10 +0000 (09:48 +0100)]
ARM: mvebu: fix register length for Armada XP PMSU
The per-CPU PMSU registers documented in the datasheet start at
0x22100 and the last register for CPU3 is at 0x22428. However, the DT
informations use <0x22100 0x430>, which makes the region end at
0x22530 and not 0x22430.
Moreover, looking at the datasheet, we can see that the registers for
CPU0 start at 0x22100, for CPU1 at 0x22200, for CPU2 at 0x22300 and
for CPU3 at 0x22400. It seems clear that 0x100 bytes of registers have
been used per CPU.
Therefore, this commit reduces the length of the PMSU per-CPU register
area from the incorrect 0x430 bytes to a more logical 0x400 bytes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Laurent Pinchart [Thu, 19 Dec 2013 15:51:06 +0000 (16:51 +0100)]
ARM: shmobile: r8a7791: Add SSI clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 19 Dec 2013 15:51:05 +0000 (16:51 +0100)]
ARM: shmobile: r8a7790: Add SSI clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 19 Dec 2013 15:51:04 +0000 (16:51 +0100)]
ARM: shmobile: r8a7791: Add QSPI module clock in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 19 Dec 2013 15:51:03 +0000 (16:51 +0100)]
ARM: shmobile: r8a7790: Add QSPI module clock in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 19 Dec 2013 15:51:02 +0000 (16:51 +0100)]
ARM: shmobile: r8a7791: Add MSIOF clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 19 Dec 2013 15:51:01 +0000 (16:51 +0100)]
ARM: shmobile: r8a7790: Add MSIOF clocks in device tree
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 19 Dec 2013 15:28:43 +0000 (16:28 +0100)]
ARM: shmobile: Remove Koelsch reference DTS
Now that the DTS file r8a7790-koelsch.dts can be used with
board-koelsch.c and board-koelsch-reference.c, proceed with removing
r8a7790-koelsch-reference.dts.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Olof Johansson [Tue, 24 Dec 2013 02:54:04 +0000 (18:54 -0800)]
Merge tag 'samsung-dt-2' of git://git./linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
Samsung DT 2nd updates for v3.14
- add DMA controller, SPI, and TMU DT nodes for exynos5420
- add PWM DT nodes for exynos5250 and exynos5420
- drop interrupt controller properties from MCT nodes
because MCT is not an interrupt controller
- move MCT nodes to exynos4x12 from board because it is
a per-processor interrupt and same 4212 and 4412
- use one cell for MCT interrupt map for exynos4 SoCs
- update Exynos MCT DT bindings accordingly
- fix missing spaces after labels for exynos
- fix mmc status property for exynos5250-snow
- add MCLK for codec for exynos5250-smdk5250
- disable SPI and I2C by default for exynos5250 SoC
and enable into requiring some boards
- rename cros5250-common to exynos5250-cros-common
* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (27 commits)
ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix
ARM: dts: Disable I2C controllers by default on Exynos5250
ARM: dts: Leave Exynos5250 SPI controller disabled by default
ARM: dts: Add CODEC MCLK for SMDK5250
ARM: dts: Add device nodes for TMU blocks for exynos5420
ARM: dts: Fix status property of mmc nodes for snow board
ARM: dts: Fix missing spaces after labels for exynos
ARM: dts: Simplify MCT interrupt map for exynos4 SoCs
ARM: dts: Move MCT node to exynos4x12.dtsi
ARM: dts: Drop interrupt controller properties from MCT nodes for exynos4 SoCs
Documentation: devicetree: Update Exynos MCT bindings description
ARM: dts: add pwm DT nodes to Exynos5250 and Exynos5420
ARM: dts: Add SPI nodes to the exynos5420 device tree file
ARM: dts: Add DMA controller node info on Exynos5420
ARM: dts: Use MSHC controller for eMMC memory for exynos4412-trats2
ARM: dts: Fix definition of MSHC device tree nodes for exynos4x12
ARM: dts: add clock provider for mshc node for Exynos4412 SOC
clk: samsung: exynos4: Fix definition of div_mmc_pre4 divider
ARM: dts: Fix exynos5250-snow's search key to be L_META
ARM: dts: Add the missing "\" key in non-US keyboards for exynos5250-snow
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Matt Porter [Thu, 19 Dec 2013 14:23:10 +0000 (09:23 -0500)]
ARM: dts: add usb udc support to bcm281xx
Adds USB OTG/PHY and clock support to BCM281xx and enables
UDC support on the bcm11351-brt and bcm28155-ap boards.
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Thu, 5 Dec 2013 19:20:44 +0000 (11:20 -0800)]
ARM: dts: Specify clocks for timer on bcm11351
Specify the external clock label in the timer node.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Thu, 5 Dec 2013 19:20:42 +0000 (11:20 -0800)]
Documentation: dt: kona-timer: Add clocks property
The frequency for the Kona timer can either be specified through the
device tree or determined by checking the rate of the clock specified
in the device tree. Update the documentation to reflect both ways.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Thu, 5 Dec 2013 19:20:40 +0000 (11:20 -0800)]
ARM: dts: Specify clocks for SDHCIs on bcm11351
Specify the external clock label in each SDHCI node.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Thu, 5 Dec 2013 19:20:39 +0000 (11:20 -0800)]
Documentation: dt: kona-sdhci: Add clocks property
The Kona SDHCI block requires a clock that must be specified in the
device tree. Update the documentation to reflect this requirement.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Thu, 5 Dec 2013 19:20:38 +0000 (11:20 -0800)]
ARM: dts: Specify clocks for UARTs on bcm11351
The frequency property in "snps,dw-apb-uart" entries are no longer
required if the rate of the external clock can be determined using the
clk api (see
e302cd9 serial: 8250_dw: add support for clk api).
This patch replaces the frequency property in the UART nodes of
bcm11351.dtsi with references to the relevant clocks following the
common clock binding.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Fri, 6 Dec 2013 23:45:27 +0000 (15:45 -0800)]
ARM: dts: bcm281xx: Add i2c busses
Add the DTS nodes for all the i2c busses in the SoC.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Thu, 5 Dec 2013 19:20:37 +0000 (11:20 -0800)]
ARM: dts: Declare clocks as fixed on bcm11351
Declare clocks that are enabled and configured by bootloaders as fixed
rate clocks in the DTS such that device drivers may use standard clock
function calls.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Tim Kryger [Fri, 6 Dec 2013 23:45:28 +0000 (15:45 -0800)]
ARM: dts: bcm28155-ap: Enable all the i2c busses
Enable all available i2c busses.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
Olof Johansson [Sun, 22 Dec 2013 22:21:06 +0000 (14:21 -0800)]
Merge tag 'at91-dt2' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre:
Second DT pull-request for 3.14
- now that PWM driver is on its way to mainline,
we can integrate the DT entries
- As an example, use PWM for at91sam9m10g45ek leds
- Addition of clock specification for newly introduced
crypto DT entries
* tag 'at91-dt2' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: add clk properties to sama5d3 TDES device node
ARM: at91/dt: add clk properties to sama5d3 AES device node
ARM: at91/dt: add clk properties to sama5d3 SHA device node
ARM: at91: at91sam9m10g45ek: switch to PWM leds
ARM: at91: add PWM device node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 22 Dec 2013 22:12:57 +0000 (14:12 -0800)]
Merge tag 'samsung-dt' of git://git./linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
Samsung DT updates for v3.14
- Add support Octa Cores for exynos5420
: populate CPU node entries to 8 Cores
: extend mct to support 8 local interrupts
- Update dwmmc nodes for exynos5250 and exynos5420
: change status property of dwmmc nodes for exynos5250
: move dwmmc nodes from exynos5 to exynos5250 because
it's different between exynos5250 and exynos5420
: rename mmc nodes from dwmmc for exynos5 SoCs
: add dwmmc nodes for exynos5420
- Add G-Scaler nodes for exynos5420
- Add HS-i2c nodes in exynos5420
: High Speed I2C 7 channels (4 to 10)
- Update sysreg binding and node name in exynos4
- Update min voltage on exynos5250-arndale
- Move fifo-depth property from boards to exynos5250 SoC
: because the fifo-depth property is SoC specific
* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Update Samsung sysreg binding document
ARM: dts: Fix sysreg node name in exynos4.dtsi
ARM: dts: Add hs-i2c nodes to exynos5420
ARM: dts: Update min voltage for vdd_arm on Arndale
ARM: dts: populate cpu node entries to 8 cpus for exynos5420
clocksource: mct: extend mct to support 8 local interrupts for Exynos5420
ARM: dts: Add device nodes for GScaler blocks for exynos5420
ARM: dts: Add dwmmc DT nodes for exynos5420 SOC
ARM: dts: rename mmc dts node for exynos5 series
ARM: dts: Move fifo-depth property from exynos5250 board dts
ARM: dts: change status property of dwmmc nodes for exynos5250
ARM: dts: Move dwmmc nodes from exynos5.dtsi to exynos5250.dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sun, 22 Dec 2013 21:08:32 +0000 (13:08 -0800)]
Linux 3.13-rc5
Jonas Jensen [Wed, 18 Dec 2013 12:58:46 +0000 (13:58 +0100)]
ARM: moxart: add MOXA ART SoC device tree files
Add a generic (dtsi) include file for MOXA ART SoCs.
Also add a file for UC-7112-LX.
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 22 Dec 2013 19:34:36 +0000 (11:34 -0800)]
Merge tag 'zynq-dt-for-3.14' of git://git.xilinx.com/linux-xlnx into next/dt
From Michal Simek:
arm: Xilinx Zynq dt patches for v3.14
- Add gem support
- Add cpus node
- TTC cleanup
* tag 'zynq-dt-for-3.14' of git://git.xilinx.com/linux-xlnx:
arm: dt: zynq: Add 'cpus' node
arm: dt: zynq: Remove 'clock-ranges' from TTC nodes
ARM: zynq: add gem support
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sun, 22 Dec 2013 19:13:02 +0000 (11:13 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Much smaller batch of fixes this week.
Biggest one is a revert of an OMAP display change that removed some
non-DT pinmux code that was still needed for 3.13 to get DSI displays
to work.
There's also a fix that resolves some misdescribed GPIO controller
resources on shmobile. The rest are mostly smaller fixes, a couple of
MAINTAINERS updates, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Revert "ARM: OMAP2+: Remove legacy mux code for display.c"
MAINTAINERS: Add keystone clock drivers
MAINTAINERS: Add keystone git tree information
ARM: s3c64xx: dt: Fix boot failure due to double clock initialization
ARM: shmobile: r8a7790: Fix GPIO resources in DTS
irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation
ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
Linus Torvalds [Sun, 22 Dec 2013 19:11:57 +0000 (11:11 -0800)]
Merge tag 'firewire-fix' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire fixlet from Stefan Richter:
"A one-liner to reenable WRITE SAME over SBP-2 like in v3.8...v3.12.
Buggy targets which could malfunction when being subjected to this
command are already sufficiently protected by a scsi_level check in sd
+ SCSI core"
* tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: sbp2: bring back WRITE SAME support
Linus Torvalds [Sun, 22 Dec 2013 19:11:20 +0000 (11:11 -0800)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Mostly minor items this time around, the most notable being a FILEIO
backend change to enforce hw_max_sectors based upon the current
block_size to address a bug where large sized I/Os (> 1M) where being
rejected"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
target: Remove extra percpu_ref_init
target/file: Update hw_max_sectors based on current block_size
iser-target: Move INIT_WORK setup into isert_create_device_ib_res
iscsi-target: Fix incorrect np->np_thread NULL assignment
qla2xxx: Fix schedule_delayed_work() for target timeout calculations
iser-target: fix error return code in isert_create_device_ib_res()
iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT set
target: Remove write-only stats fields and lock from struct se_node_acl
iscsi-target: return -EINVAL on oversized configfs parameter
Linus Torvalds [Sun, 22 Dec 2013 19:03:49 +0000 (11:03 -0800)]
Merge git://git.kvack.org/~bcrl/aio-next
Pull AIO leak fixes from Ben LaHaise:
"I've put these two patches plus Linus's change through a round of
tests, and it passes millions of iterations of the aio numa
migratepage test, as well as a number of repetitions of a few simple
read and write tests.
The first patch fixes the memory leak Kent introduced, while the
second patch makes aio_migratepage() much more paranoid and robust"
* git://git.kvack.org/~bcrl/aio-next:
aio/migratepages: make aio migrate pages sane
aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
Linus Torvalds [Thu, 19 Dec 2013 20:11:12 +0000 (05:11 +0900)]
aio: clean up and fix aio_setup_ring page mapping
Since commit
36bc08cc01709 ("fs/aio: Add support to aio ring pages
migration") the aio ring setup code has used a special per-ring backing
inode for the page allocations, rather than just using random anonymous
pages.
However, rather than remembering the pages as it allocated them, it
would allocate the pages, insert them into the file mapping (dirty, so
that they couldn't be free'd), and then forget about them. And then to
look them up again, it would mmap the mapping, and then use
"get_user_pages()" to get back an array of the pages we just created.
Now, not only is that incredibly inefficient, it also leaked all the
pages if the mmap failed (which could happen due to excessive number of
mappings, for example).
So clean it all up, making it much more straightforward. Also remove
some left-overs of the previous (broken) mm_populate() usage that was
removed in commit
d6c355c7dabc ("aio: fix race in ring buffer page
lookup introduced by page migration support") but left the pointless and
now misleading MAP_POPULATE flag around.
Tested-and-acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Cooper [Sun, 22 Dec 2013 17:16:36 +0000 (17:16 +0000)]
ARM: kirkwood: 6282: sort DT nodes by address
We recently sorted the nodes in dove, orion5x, kirkwood, and armada
370/xp. However, I missed this file. -6281 is fine.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Tue, 17 Dec 2013 20:21:52 +0000 (21:21 +0100)]
Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
Add nodes for the two SATA PHYs on kirkwood.
Add node for the one SATA PHY on Dove.
Add pHandles to the PHYs in the sata nodes.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Benjamin LaHaise [Sat, 21 Dec 2013 22:56:08 +0000 (17:56 -0500)]
aio/migratepages: make aio migrate pages sane
The arbitrary restriction on page counts offered by the core
migrate_page_move_mapping() code results in rather suspicious looking
fiddling with page reference counts in the aio_migratepage() operation.
To fix this, make migrate_page_move_mapping() take an extra_count parameter
that allows aio to tell the code about its own reference count on the page
being migrated.
While cleaning up aio_migratepage(), make it validate that the old page
being passed in is actually what aio_migratepage() expects to prevent
misbehaviour in the case of races.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Benjamin LaHaise [Sat, 21 Dec 2013 20:49:28 +0000 (15:49 -0500)]
aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
e34ecee2ae791df674dfb466ce40692ca6218e43 reworked the percpu reference
counting to correct a bug trinity found. Unfortunately, the change lead
to kioctxes being leaked because there was no final reference count to
put. Add that reference count back in to fix things.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org
Mark Brown [Sat, 21 Dec 2013 01:09:25 +0000 (10:09 +0900)]
ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix
Make it easier to notice the common file for ChromeOS devices based on
the Exynos5250 by giving it the exynos5250 prefix that the boards have.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Linus Torvalds [Sat, 21 Dec 2013 00:52:45 +0000 (16:52 -0800)]
Don't set the INITRD_COMPRESS environment variable automatically
Commit
1bf49dd4be0b ("./Makefile: export initial ramdisk compression
config option") started setting the INITRD_COMPRESS environment variable
depending on which decompression models the kernel had available.
That is completely broken.
For example, we by default have CONFIG_RD_LZ4 enabled, and are able to
decompress such an initrd, but the user tools to *create* such an initrd
may not be availble. So trying to tell dracut to generate an
lz4-compressed image just because we can decode such an image is
completely inappropriate.
Cc: J P <ppandit@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 Dec 2013 23:48:45 +0000 (15:48 -0800)]
Merge tag 'xfs-for-linus-v3.13-rc5' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
"This contains fixes for some asserts
related to project quotas, a memory leak, a hang when disabling group or
project quotas before disabling user quotas, Dave's email address, several
fixes for the alignment of file allocation to stripe unit/width geometry, a
fix for an assertion with xfs_zero_remaining_bytes, and the behavior of
metadata writeback in the face of IO errors.
Details:
- fix memory leak in xfs_dir2_node_removename
- fix quota assertion in xfs_setattr_size
- fix quota assertions in xfs_qm_vop_create_dqattach
- fix for hang when disabling group and project quotas before
disabling user quotas
- fix Dave Chinner's email address in MAINTAINERS
- fix for file allocation alignment
- fix for assertion in xfs_buf_stale by removing xfsbdstrat
- fix for alignment with swalloc mount option
- fix for "retry forever" semantics on IO errors"
* tag 'xfs-for-linus-v3.13-rc5' of git://oss.sgi.com/xfs/xfs:
xfs: abort metadata writeback on permanent errors
xfs: swalloc doesn't align allocations properly
xfs: remove xfsbdstrat error
xfs: align initial file allocations correctly
MAINTAINERS: fix incorrect mail address of XFS maintainer
xfs: fix infinite loop by detaching the group/project hints from user dquot
xfs: fix assertion failure at xfs_setattr_nonsize
xfs: fix false assertion at xfs_qm_vop_create_dqattach
xfs: fix memory leak in xfs_dir2_node_removename
Olof Johansson [Fri, 20 Dec 2013 22:28:05 +0000 (14:28 -0800)]
mm: fix build of split ptlock code
Commit
597d795a2a78 ('mm: do not allocate page->ptl dynamically, if
spinlock_t fits to long') restructures some allocators that are compiled
even if USE_SPLIT_PTLOCKS arn't used. It results in compilation
failure:
mm/memory.c:4282:6: error: 'struct page' has no member named 'ptl'
mm/memory.c:4288:12: error: 'struct page' has no member named 'ptl'
Add in the missing ifdef.
Fixes:
597d795a2a78 ('mm: do not allocate page->ptl dynamically, if spinlock_t fits to long')
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Fri, 20 Dec 2013 23:33:23 +0000 (08:33 +0900)]
ARM: dts: Disable I2C controllers by default on Exynos5250
Ensure that unused I2C controllers are not activated, causing problems due
to inappropriate pinmuxing or similar, by marking the controllers as
disabled by default and requiring boards to explicitly enable those that
are in use.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Mark Brown [Fri, 20 Dec 2013 23:31:30 +0000 (08:31 +0900)]
ARM: dts: Leave Exynos5250 SPI controller disabled by default
Rather than requiring each board to explicitly disable the SPI controllers
it is not using instead require boards to enable those that they are using.
This is less work overall since normally at most one of the controllers is
in use and avoids issues caused by inappropriate pinmuxing.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Mark Brown [Fri, 20 Dec 2013 22:24:26 +0000 (07:24 +0900)]
ARM: dts: Add CODEC MCLK for SMDK5250
There is a 16.934MHz fixed rate clock connected to MCLK1 on the CODEC, add
this to the device tree bindings.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Naveen Krishna Chatradhi [Fri, 20 Dec 2013 20:59:49 +0000 (05:59 +0900)]
ARM: dts: Add device nodes for TMU blocks for exynos5420
Exynos5420 SoC has per core thermal management unit.
5 TMU channels 4 for CPUs and 5th for GPU.
This patch adds the device tree nodes to the DT device list.
Nodes carry the misplaced second base address and the second
clock to access the misplaced base address.
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Yuvaraj Kumar C D [Wed, 18 Dec 2013 19:31:19 +0000 (04:31 +0900)]
ARM: dts: Fix status property of mmc nodes for snow board
Commit
e908d5c5 ("ARM: dts: change status property of dwmmc nodes
for exynos5250") missed out handling the exynos5250 snow dts file.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Wed, 18 Dec 2013 18:17:54 +0000 (03:17 +0900)]
ARM: dts: Fix missing spaces after labels for exynos
For consistency with other device tree nodes, this patch adds missing
spaces after node labels.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Wed, 18 Dec 2013 18:17:49 +0000 (03:17 +0900)]
ARM: dts: Simplify MCT interrupt map for exynos4 SoCs
There is no need to use two cells for interrupt specifiers inside the
MCT interrupt map, so this patch simplifies the map to use one cell.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Wed, 18 Dec 2013 18:17:43 +0000 (03:17 +0900)]
ARM: dts: Move MCT node to exynos4x12.dtsi
For MCT block compatible with "samsung,exynos4412-mct", that uses PPI
interrupts for local timers, only one local interrupt needs to be
specified, since it is a per-processor interrupt.
This allows moving MCT node of Exynos4x12 SoCs back to common
exynos4x12.dtsi, since they have the same set of interrupts to be
specified, which was the only difference.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Wed, 18 Dec 2013 18:17:39 +0000 (03:17 +0900)]
ARM: dts: Drop interrupt controller properties from MCT nodes for exynos4 SoCs
MCT is not an interrupt controller and so there is no point for device
tree nodes representing it to contain interrupt-controller
and #interrupt-cells properties.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Wed, 18 Dec 2013 18:17:31 +0000 (03:17 +0900)]
Documentation: devicetree: Update Exynos MCT bindings description
This patch updates description of device tree bindings for Exynos MCT
(multicore timers). Namely:
- added note about simplified specification of local timer interrupts,
when using single per-processor interrupt for all local timers,
- changed first example that was incorrectly suggesting that global
timer interrupts are optional,
- simplified example interrupt map,
- added example showing simplified local timer interrupt specification.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Leela Krishna Amudala [Wed, 18 Dec 2013 17:41:02 +0000 (02:41 +0900)]
ARM: dts: add pwm DT nodes to Exynos5250 and Exynos5420
Add the device-tree binding for the PWM controller to Exynos5250 and Exynos5420
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>