OSDN Git Service
Jiri Olsa [Wed, 6 Jun 2018 22:15:06 +0000 (00:15 +0200)]
perf stat: Add --interval-clear option
Adding --interval-clear option to clear the screen before next interval.
Committer testing:
# perf stat -I 1000 --interval-clear
And, as expected, it behaves almost like:
# watch -n 0 perf stat -a sleep 1
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 6 Jun 2018 22:15:05 +0000 (00:15 +0200)]
perf tools: Fix error index for pmu event parser
For events we provide specific error message we need to set error column
index, PMU parser is missing that, adding it.
Before:
$ perf stat -e cycles,krava/cycles/ kill
event syntax error: 'cycles,krava/cycles/'
\___ Cannot find PMU `krava'. Missing kernel support?
After:
$ perf stat -e cycles,krava/cycles/ kill
event syntax error: 'cycles,krava/cycles/'
\___ Cannot find PMU `krava'. Missing kernel support?
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 7 Jun 2018 17:42:27 +0000 (14:42 -0300)]
perf hists: Reimplement hists__has_callchains()
There are places where we have only access to struct hists and need to
know if any of its hist_entries has callchains, like when drawing
headers for the various output modes (stdio, TUI, etc), so, when adding
a new hist_entry, check if it has callchains, storing this info for
later use by hists__has_callchains().
This reimplementation is necessary because not always a 'struct hists'
is allocated together with a 'struct perf evsel', so we can't go from
'hists' to 'perf_event_attr.sample_type & PERF_SAMPLE_CALLCHAIN'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hg5g7yddjio3ljwyqnnaj5dt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 7 Jun 2018 17:33:31 +0000 (14:33 -0300)]
perf hists browser gtk: Use hist_entry__has_callchains()
Since we can't go from struct hists to struct evsel for all cases (c2c
is an exception) and we have access to the hist_entry, use
hist_entry__has_callchains() in the GTK+ hists browser to figure out
if callchains are available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8owkgrruzzi5emvblwh4e6le@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 7 Jun 2018 17:27:19 +0000 (14:27 -0300)]
perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
Since 'perf c2c' uses 'struct hists' not allocated together with a
'struct perf_evsel' instance, we can't go from a 'struct hist_entry'
pointer to a 'struct perf_evsel' via he->hists, so, instead, check if
space was set aside for hist_entry->callchain[0] at hist_entry__new()
time.
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
fabd37b837f6 ("perf hists: Check if a hist_entry has callchains before using them")
Link: https://lkml.kernel.org/n/tip-e8ife8djvvvwmeze3s4yodii@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 7 Jun 2018 17:19:54 +0000 (14:19 -0300)]
perf hists: Save the callchain_size in struct hist_entry
So that we can figure out the real size of the struct and also be able
to tell if callchains may be present in this histogram entry.
Since we can't always guarantee that from hist_entry->hists we can use
hists_to_evsel, to then look at evsel->attr.sample_type for
PERF_SAMPLE_CALLCHAIN, like with the 'perf c2c' tool, that uses plain
'struct hists' instances, we need another way of deciding if a specific
hist_entry instance has callchains associated with it, i.e. if its
hist_entry->callchain[0] has space allocated for.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ptvndealxs1k7myluvu9flnq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 7 Jun 2018 05:18:51 +0000 (07:18 +0200)]
Merge tag 'perf-core-for-mingo-4.18-
20180606' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf stat:
- Display user and system time for workload targets (Jiri Olsa)
perf record:
- Enable arbitrary event names thru name= modifier (Alexey Budankov)
PowerPC:
- Add a python script for hypervisor call statistics (Ravi Bangoria)
Intel PT: (Adrian Hunter)
- Fix sync_switch INTEL_PT_SS_NOT_TRACING
- Fix decoding to accept CBR between FUP and corresponding TIP
- Fix MTC timing after overflow
- Fix "Unexpected indirect branch" error
perf test:
- record+probe_libc_inet_pton:
- To get the symbol table for dynamic
shared objects on ubuntu we need to pass the -D/--dynamic command line
option, unlike with the fedora distros (Arnaldo Carvalho de Melo)
- code-reading:
- Fix perf_env setup for PTI entry trampolines (Adrian Hunter)
- kmod-path:
- Add tests for vdso32 and vdsox32 (Adrian Hunter)
- Use header file util/debug.h (Thomas Richter)
perf annotate:
- Make the various UI backends (stdio, TUI, gtk) use more consistently
structs with annotation options as specified by the user (Arnaldo Carvalho de Melo)
- Move annotation specific knobs from the symbol_conf global kitchen
sink to the annotation option structs (Arnaldo Carvalho de Melo)
perf script:
- Add more PMU fields to python scripts event handler dict (Jin Yao)
Core:
- Fix misleading error for some unparsable events mentioning PMUs when
those are not involved in the problem (Jiri Olsa)
- Consider BSS symbols when processing /proc/kallsyms ('B' and 'b')
(Arnaldo Carvalho de Melo)
- Be more robust when trying to use per-symbol histograms, checking for
unlikely but possible cases where the space for the histograms wasn't
allocated, print a debug message for such cases (Arnaldo Carvalho de Melo)
- Fix symbol and object code resolution for vdso32 and vdsox32 (Adrian Hunter)
- No need to check for null when passing pointers to foo__get() style
refcount grabbing helpers, just like in the kernel and with free(),
its safe to pass a NULL pointer to avoid having to check it before
each and every foo__get() call (Arnaldo Carvalho de Melo)
- Remove some dead code (quote.[ch]) (Arnaldo Carvalho de Melo)
- Remove some needless globals, making them local (Arnaldo Carvalho de Melo)
- Reduce usage of symbol_conf.use_callchain, using other means of
finding out if callchains are in use or available for specific events,
as we evolved this codebase to allow requesting callchains for just
a subset of the monitored events. In time it will help polish
recording and showing mixed sets accross the various tools:
perf record -e cycles/call-graph=fp/,cache-misses/call-graph=dwarf/,instructions'
(Arnaldo Carvalho de Melo)
- Consider PTI entry trampolines in map__rip_2objdump() (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jin Yao [Fri, 1 Jun 2018 09:01:03 +0000 (17:01 +0800)]
perf script python: Add dict fields introduction to Documentation
Add a brief introduction about fields to perf-script-python.txt.
It should help python script developers in easily finding what fields
are supported.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1527843663-32288-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Fri, 1 Jun 2018 09:01:02 +0000 (17:01 +0800)]
perf script python: Add more PMU fields to event handler dict
When doing pmu sampling and then running a script with perf script -s
script.py, the process_event function gets dictionary with some fields
from the perf ring buffer (like ip, sym, callchain etc).
But we miss quite a few fields we report now, for example, LBRs, data
source, weight, transaction, iregs, uregs, etc.
This patch reports these fields for perf script python processing.
New keys/items:
---------------
key : brstack
items: from, to, from_dsoname, to_dsoname, mispred,
predicted, in_tx, abort, cycles.
key : brstacksym
items: from, to, pred, in_tx, abort (converted string)
key : datasrc
key : datasrc_decode (decoded string)
key : iregs
key : uregs
key : weight
key : transaction
v2:
---
Add new fields for dso.
Use PyBool_FromLong() for mispred/predicted/in_tx/abort
Committer notes:
!sym->name isn't valid, as its not a pointer, its a [0] array, use
!sym->name[0] instead, guaranteed to be the case by symbol__new.
This was caught by just one of the containers:
52 54.22 ubuntu:17.04 : FAIL gcc (Ubuntu 6.3.0-12ubuntu2) 6.3.0
20170406
CC /tmp/build/perf/util/scripting-engines/trace-event-python.o
util/scripting-engines/trace-event-python.c:534:20: error: address of array 'sym->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (!sym || !sym->name)
~~~~~~^~~~
1 error generated.
mv: cannot stat '/tmp/build/perf/util/scripting-engines/.trace-event-python.o.tmp': No such file or directory
/git/linux/tools/build/Makefile.build:96: recipe for target '/tmp/build/perf/util/scripting-engines/trace-event-python.o' failed
make[5]: *** [/tmp/build/perf/util/scripting-engines/trace-event-python.o] Error 1
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1527843663-32288-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Fri, 1 Jun 2018 09:01:01 +0000 (17:01 +0800)]
perf script python: Move dsoname code to a new function
This patch creates a new function get_dsoname() and move the code which
gets the dsoname string to this function.
That's because in next patch, when we process LBR data, we will also
need get_dsoname() to return dsoname for branch from/to.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1527843663-32288-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 5 Jun 2018 20:06:57 +0000 (17:06 -0300)]
perf symbols: Add BSS symbols when reading from /proc/kallsyms
We were not considering 'B' and 'b' (BSS, uninitialized data objects,
that gets set to zero at program start), do it so that we can resolve
more symbols in tools doing resolution of data operands, like 'perf c2c'.
When using vmlinux, i.e. an ELF symbol table, those were already
considered, as the decision was about STT_FUNC or STT_OBJECT, and the
later covers BSS symbols.
# grep -i ' b ' /proc/kallsyms | head -20 | tail -5
ffffffffa789d030 b execute_command
ffffffffa789d038 b initcall_command_line
ffffffffa789d040 b static_command_line
ffffffffa789d048 B ROOT_DEV
ffffffffa789d050 b once.73786
#
# readelf -s /lib/modules/`uname -r`/build/vmlinux | grep ROOT_DEV
79219:
ffffffff8289d048 4 OBJECT GLOBAL DEFAULT 58 ROOT_DEV
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-z960xobig39ca1pmp5brl2fr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 5 Jun 2018 19:31:21 +0000 (16:31 -0300)]
perf annnotate: Make __symbol__inc_addr_samples handle src->histograms == NULL
Making it a bit more robust, this took place here when a sample appeared
right after:
ffffffff8a925000 D __nosave_end
And before the next considered symbol, which, using kallsyms make us
over guess the size of __nosave_end, and then the sequence:
hist_entry__inc_addr_samples ->
symbol__inc_addr_samples ->
symbol__hists ->
annotated_source__alloc_histograms
Ends up not liking to allocate gigabytes of ram for annotation...
This will be alleviated by considering BSS symbols, which we should but
don't so far, and then we should investigate those samples further.
The testcase was to have:
perf top -e cycles/call-graph=fp/,cache-misses/call-graph=dwarf/,instructions
Running for a while till it segfaulted trying to access NULL notes->src->histograms.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ndfjtpiop3tdcnyjgp320ra8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 31 May 2018 10:23:45 +0000 (13:23 +0300)]
perf intel-pt: Fix "Unexpected indirect branch" error
Some Atom CPUs can produce FUP packets that contain NLIP (next linear
instruction pointer) instead of CLIP (current linear instruction
pointer). That will result in "Unexpected indirect branch" errors. Fix
by comparing IP to NLIP in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 31 May 2018 10:23:44 +0000 (13:23 +0300)]
perf intel-pt: Fix MTC timing after overflow
On some platforms, overflows will clear before MTC wraparound, and there
is no following TSC/TMA packet. In that case the previous TMA is valid.
Since there will be a valid TMA either way, stop setting 'have_tma' to
false upon overflow.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 31 May 2018 10:23:43 +0000 (13:23 +0300)]
perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP
It is possible to have a CBR packet between a FUP packet and
corresponding TIP packet. Stop treating it as an error.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 31 May 2018 10:23:42 +0000 (13:23 +0300)]
perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
In one case, INTEL_PT_SS_NOT_TRACING state was not correctly
transitioning to INTEL_PT_SS_TRACING state due to a missing case clause.
Add it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1527762225-26024-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Tue, 5 Jun 2018 12:48:01 +0000 (18:18 +0530)]
perf script powerpc: Python script for hypervisor call statistics
Add python script to show hypervisor call statistics. Ex,
# perf record -a -e "{powerpc:hcall_entry,powerpc:hcall_exit}"
# perf script -s scripts/python/powerpc-hcalls.py
hcall count min(ns) max(ns) avg(ns)
--------------------------------------------------------------------
H_RANDOM 82 838 1164 904
H_PUT_TCE 47 1078 5928 2003
H_EOI 266 1336 3546 1654
H_ENTER 28 1646 4038 1952
H_PUT_TCE_INDIRECT 230 2166 18168 6109
H_IPI 238 1072 3232 1688
H_SEND_LOGICAL_LAN 42 5488 21366 7694
H_STUFF_TCE 294 986 6210 3591
H_XIRR 266 2286 6990 3783
H_PROTECT 10 2196 3556 2555
H_VIO_SIGNAL 294 1028 2784 1311
H_ADD_LOGICAL_LAN_BUFFER 53 1978 3450 2600
H_SEND_CRQ 77 1762 7240 2447
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180605124801.17210-1-ravi.bangoria@linux.ibm.com
[ Fixup typo: table_loockup -> table_lookup ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Jun 2018 14:11:13 +0000 (11:11 -0300)]
perf test record+probe_libc_inet_pton: Ask 'nm' for dynamic symbols
Adrian reported that this test fails in his system where:
probe libc's inet_pton & backtrace it with ping: FAILED!
root@kbl04:~/git/linux-perf# nm -g /lib/x86_64-linux-gnu/libc-2.19.so | grep inet_pton
nm: /lib/x86_64-linux-gnu/libc-2.19.so: no symbols
This fails on ubuntu systems, with Adrian's being kubuntu 14.04, I
tested with ubuntu 14.04.4 and 18.04, and there we need to use the
-D/--dynamic 'nm' option to have this test working. And it works as well
with that on fedora 27, so use it.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zlfnbauad3ljlmtjgo0v660u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 5 Jun 2018 07:30:00 +0000 (10:30 +0300)]
perf map: Consider PTI entry trampolines in rip_2objdump()
perf tools uses map__rip_2objdump() to calculate objdump virtual addresses.
map__rip_2objdump() needs to be amended to deal with PTI entry trampolines.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1528183800-21577-1-git-send-email-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 5 Jun 2018 07:30:00 +0000 (10:30 +0300)]
perf test code-reading: Fix perf_env setup for PTI entry trampolines
The "Object code reading" test will not create maps for the PTI entry
trampolines unless the machine environment exists to show that the arch is
x86_64.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1528183800-21577-1-git-send-email-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 5 Jun 2018 12:14:16 +0000 (14:14 +0200)]
perf tools: Fix pmu events parsing rule
Currently all the event parsing fails end up
in the event_pmu rule, and display misleading
help like:
$ perf stat -e inst kill
event syntax error: 'inst'
\___ Cannot find PMU `inst'. Missing kernel support?
...
The reason is that the event_pmu is too strong
and match also single string. Changing it to
force the '/' separators to be part of the rule,
and getting the proper error now:
$ perf stat -e inst kill
event syntax error: 'inst'
\___ parser error
Run 'perf list' for a list of valid events
...
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180605121416.31645-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 5 Jun 2018 12:13:13 +0000 (14:13 +0200)]
perf stat: Display user and system time
Adding the support to read rusage data once the workload is finished and
display the system/user time values:
$ perf stat --null perf bench sched pipe
...
Performance counter stats for 'perf bench sched pipe':
5.
342599256 seconds time elapsed
2.
544434000 seconds user
4.
549691000 seconds sys
It works only in non -r mode and only for workload target.
So as of now, for workload targets, we display 3 types of timings. The
time we meassure in perf stat from enable to disable+period:
5.
342599256 seconds time elapsed
The time spent in user and system lands, displayed only for workload
session/target:
2.
544434000 seconds user
4.
549691000 seconds sys
Those times are the very same displayed by 'time' tool. They are
returned by wait4 call via the getrusage struct interface.
Committer notes:
Had to rename some variables to avoid this on older systems such as
centos:6:
builtin-stat.c: In function 'print_footer':
builtin-stat.c:1831: warning: declaration of 'stime' shadows a global declaration
/usr/include/time.h:297: warning: shadowed declaration is here
Committer testing:
# perf stat --null time perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed
1000000 pipe operations between two processes
Total time: 5.526 [sec]
5.526534 usecs/op
180945 ops/sec
1.00user 6.25system 0:05.52elapsed 131%CPU (0avgtext+0avgdata 8056maxresident)k
0inputs+0outputs (0major+606minor)pagefaults 0swaps
Performance counter stats for 'time perf bench sched pipe':
5.
530978744 seconds time elapsed
1.
004037000 seconds user
6.
259937000 seconds sys
#
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180605121313.31337-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexey Budankov [Mon, 4 Jun 2018 06:50:56 +0000 (09:50 +0300)]
perf record: Enable arbitrary event names thru name= modifier
Enable complex event names containing [.:=,] symbols to be encoded into Perf
trace using name= modifier e.g. like this:
perf record -e cpu/name=\'OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM\',\
period=0x3567e0,event=0x3c,cmask=0x1/Duk ./futex
Below is how it looks like in the report output. Please note explicit escaped
quoting at cmdline string in the header so that thestring can be directly reused
for another collection in shell:
perf report --header
# ========
...
# cmdline : /root/abudanko/kernel/tip/tools/perf/perf record -v -e cpu/name=\'OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM\',period=0x3567e0,event=0x3c,cmask=0x1/Duk ./futex
# event : name = OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM, , type = 4, size = 112, config = 0x100003c, { sample_period, sample_freq } =
3500000, sample_type = IP|TID|TIME, disabled = 1, inh
...
# ========
#
#
# Total Lost Samples: 0
#
# Samples: 24K of event 'OFFCORE_RESPONSE:request=DEMAND_RFO:response=L3_HIT.SNOOP_HITM'
# Event count (approx.):
86492000000
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ..............................................
#
14.75% futex [kernel.vmlinux] [k] __entry_trampoline_start
...
perf stat -e cpu/name=\'CPU_CLK_UNHALTED.THREAD:cmask=0x1\',period=0x3567e0,event=0x3c,cmask=0x1/Duk ./futex
10000000 process context switches in 16678890291ns (1667.9ns/ctxsw)
Performance counter stats for './futex':
88,095,770,571 CPU_CLK_UNHALTED.THREAD:cmask=0x1
16.
679542407 seconds time elapsed
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c194b060-761d-0d50-3b21-bb4ed680002d@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 4 Jun 2018 12:56:54 +0000 (15:56 +0300)]
perf tools: Fix symbol and object code resolution for vdso32 and vdsox32
Fix __kmod_path__parse() so that perf tools does not treat vdso32 and
vdsox32 as kernel modules and fail to find the object.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes:
1f121b03d058 ("perf tools: Deal with kernel module names in '[]' correctly")
Link: http://lkml.kernel.org/r/1528117014-30032-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 4 Jun 2018 12:56:53 +0000 (15:56 +0300)]
perf tests kmod-path: Add tests for vdso32 and vdsox32
Add tests for vdso32 and vdsox32. This will cause the overall test to
fail because __kmod_path__parse() does not handle vdso32 or vdsox32.
Fixes:
1f121b03d058 ("perf tools: Deal with kernel module names in '[]' correctly")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1528117014-30032-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 29 May 2018 16:59:24 +0000 (13:59 -0300)]
perf hists: Check if a hist_entry has callchains before using them
So far if we use 'perf record -g' this will make
symbol_conf.use_callchain 'true' and logic will assume that all events
have callchains enabled, but ever since we added the possibility of
setting up callchains for some events (e.g.: -e
cycles/call-graph=dwarf/) while not for others, we limit usage scenarios
by looking at that symbol_conf.use_callchain global boolean, we better
look at each event attributes.
On the road to that we need to look if a hist_entry has callchains, that
is, to go from hist_entry->hists to the evsel that contains it, to then
look at evsel->sample_type for PERF_SAMPLE_CALLCHAIN.
The next step is to add a symbol_conf.ignore_callchains global, to use
in the places where what we really want to know is if callchains should
be ignored, even if present.
Then -g will mean just to select a callchain mode to be applied to all
events not explicitely setting some other callchain mode, i.e. a default
callchain mode, and --no-call-graph will set
symbol_conf.ignore_callchains with that clear intention.
That too will at some point become a per evsel thing, that tools can set
for all or just a few of its evsels.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0sas5cm4dsw2obn75g7ruz69@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 29 May 2018 16:28:24 +0000 (13:28 -0300)]
perf hists: Introduce hist_entry__has_callchain() method
We'll use this helper more frequently when reworking
symbol_conf.use_callchain logic, where knowing if a hist_entry has
callchains is the important bit, so make going from hist_entry to hists
to evsel easier, compact.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p6gioxkzpkpz71dtt4wcs36o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 19:07:56 +0000 (16:07 -0300)]
perf sched: Use sched->show_callchain where appropriate
Instead of using symbol_conf.use_callchain, reducing its usage a bit
more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-edgwb1b2mpbrdeg0w64wp7ms@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Jun 2018 13:34:20 +0000 (10:34 -0300)]
perf script: Check if evsel has callchains before trying to use it
We were checking just if callchain processing was asked for by the
user, not if the evsel itself has callchains, and since we can have
some evsels with callchains and others without, check that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-inxl7k49q9f9w1se039fbxuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 19:00:29 +0000 (16:00 -0300)]
perf evsel: Add has_callchain() helper to make code more compact/clear
Its common to have the (evsel->attr.sample_type & PERF_SAMPLE_CALLCHAIN),
so add an evsel__has_callchain(evsel) helper.
This will actually get more uses as we check that instead of
symbol_conf.use_callchain in places where that produces the same result
but makes this decision to be more fine grained, per evsel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-145340oytbthatpfeaq1do18@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Tue, 5 Jun 2018 02:23:13 +0000 (19:23 -0700)]
Merge branch 'x86-dax-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 dax updates from Ingo Molnar:
"This contains x86 memcpy_mcsafe() fault handling improvements the
nvdimm tree would like to make more use of"
* 'x86-dax-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()
x86/asm/memcpy_mcsafe: Add write-protection-fault handling
x86/asm/memcpy_mcsafe: Return bytes remaining
x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling
x86/asm/memcpy_mcsafe: Remove loop unrolling
Linus Torvalds [Tue, 5 Jun 2018 02:19:16 +0000 (19:19 -0700)]
Merge branch 'x86-debug-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 debug updates from Ingo Molnar:
"This contains the x86 oops code printing reorganization and cleanups
from Borislav Betkov, with a particular focus in enhancing opcode
dumping all around"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Explain the reasoning for the prologue and buffer size
x86/dumpstack: Save first regs set for the executive summary
x86/dumpstack: Add a show_ip() function
x86/fault: Dump user opcode bytes on fatal faults
x86/dumpstack: Add loglevel argument to show_opcodes()
x86/dumpstack: Improve opcodes dumping in the code section
x86/dumpstack: Carve out code-dumping into a function
x86/dumpstack: Unexport oops_begin()
x86/dumpstack: Remove code_bytes
Linus Torvalds [Tue, 5 Jun 2018 02:17:47 +0000 (19:17 -0700)]
Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apm: Fix spelling mistake: "caculate" -> "calculate"
x86/mtrr: Rename main.c to mtrr.c and remove duplicate prefixes
x86: Remove pr_fmt duplicate logging prefixes
x86/early-quirks: Rename duplicate define of dev_err
x86/bpf: Clean up non-standard comments, to make the code more readable
Linus Torvalds [Tue, 5 Jun 2018 02:16:16 +0000 (19:16 -0700)]
Merge branch 'x86-build-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
"A handful of build system (Makefile, linker script) cleanups by
Masahiro Yamada"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build/vdso: Put generated linker scripts to $(obj)/
x86/build/vdso: Remove unnecessary export in Makefile
x86/build/vdso: Remove unused $(vobjs-nox32) in Makefile
x86/build: Remove no-op macro VMLINUX_SYMBOL()
Linus Torvalds [Tue, 5 Jun 2018 01:47:06 +0000 (18:47 -0700)]
Merge branch 'x86-asm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
- better support (non-atomic) 64-bit readq()/writeq() variants (Andy
Shevchenko)
- __clear_user() micro-optimization (Alexey Dobriyan)
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/io: Define readq()/writeq() to use 64-bit type
x86/asm/64: Micro-optimize __clear_user() - Use immediate constants
Linus Torvalds [Tue, 5 Jun 2018 01:19:18 +0000 (18:19 -0700)]
Merge branch 'x86-boot-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Centaur CPU updates (David Wang)
- AMD and other CPU topology enumeration improvements and fixes
(Borislav Petkov, Thomas Gleixner, Suravee Suthikulpanit)
- Continued 5-level paging work (Kirill A. Shutemov)
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Mark __pgtable_l5_enabled __initdata
x86/mm: Mark p4d_offset() __always_inline
x86/mm: Introduce the 'no5lvl' kernel parameter
x86/mm: Stop pretending pgtable_l5_enabled is a variable
x86/mm: Unify pgtable_l5_enabled usage in early boot code
x86/boot/compressed/64: Fix trampoline page table address calculation
x86/CPU: Move x86_cpuinfo::x86_max_cores assignment to detect_num_cpu_cores()
x86/Centaur: Report correct CPU/cache topology
x86/CPU: Move cpu_detect_cache_sizes() into init_intel_cacheinfo()
x86/CPU: Make intel_num_cpu_cores() generic
x86/CPU: Move cpu local function declarations to local header
x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available
x86/CPU: Modify detect_extended_topology() to return result
x86/CPU/AMD: Calculate last level cache ID from number of sharing threads
x86/CPU: Rename intel_cacheinfo.c to cacheinfo.c
perf/events/amd/uncore: Fix amd_uncore_llc ID to use pre-defined cpu_llc_id
x86/CPU/AMD: Have smp_num_siblings and cpu_llc_id always be present
x86/Centaur: Initialize supported CPU features properly
Linus Torvalds [Tue, 5 Jun 2018 00:45:38 +0000 (17:45 -0700)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- power-aware scheduling improvements (Patrick Bellasi)
- NUMA balancing improvements (Mel Gorman)
- vCPU scheduling fixes (Rohit Jain)
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Update util_est before updating schedutil
sched/cpufreq: Modify aggregate utilization to always include blocked FAIR utilization
sched/deadline/Documentation: Add overrun signal and GRUB-PA documentation
sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu()
sched/wait: Include <linux/wait.h> in <linux/swait.h>
sched/numa: Stagger NUMA balancing scan periods for new threads
sched/core: Don't schedule threads on pre-empted vCPUs
sched/fair: Avoid calling sync_entity_load_avg() unnecessarily
sched/fair: Rearrange select_task_rq_fair() to optimize it
Linus Torvalds [Tue, 5 Jun 2018 00:14:22 +0000 (17:14 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- x86 Intel uncore driver cleanups and enhancements (Kan Liang)
- group scheduling and other fixes (Song Liu
- store frame pointer in the sample traces for better profiling
(Alexey Budankov)
- compat fixes/enhancements (Eugene Syromiatnikov)
Tooling side changes, which you can build and install in a single step
via:
make -C tools/perf clean install
perf annotate:
- Support 'perf annotate --group' for non-explicit recorded event
"groups", showing multiple columns, one for each event, just like
when dealing with explicit event groups (those enclosed with {})
(Jin Yao)
- Record min/max LBR cycles (>= Skylake) and add 'perf annotate' TUI
hotkey to show it (c) (Jin Yao)
perf bpf:
- Add infrastructure to help in writing eBPF C programs to be used
with '-e name.c' type events in tools such as 'record' and 'trace',
with headers for common constructs and an examples directory that
will get populated as we add more such helpers and the 'perf bpf'
(Arnaldo Carvalho de Melo)
perf stat:
- Display time in precision based on std deviation (Jiri Olsa)
- Add --table option to display time of each run (Jiri Olsa)
- Display length strings of each run for --table option (Jiri Olsa)
perf buildid-cache:
- Add --list and --purge-all options (Ravi Bangoria)
perf test:
- Let 'perf test list' display subtests (Hendrik Brueckner)
perf pti:
- Create extra kernel maps to help in decoding samples in x86 PTI
entry trampolines (Adrian Hunter)
- Copy x86 PTI entry trampoline sections in the kcore copy used for
annotation and intel_pt CPU traces decoding (Adrian Hunter)
... and a lot of other fixes, enhancements and cleanups I did not
list, see the shortlog and git log for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
perf/x86/intel/uncore: Clean up client IMC uncore
perf/x86/intel/uncore: Expose uncore_pmu_event*() functions
perf/x86/intel/uncore: Support IIO free-running counters on SKX
perf/x86/intel/uncore: Add infrastructure for free running counters
perf/x86/intel/uncore: Add new data structures for free running counters
perf/x86/intel/uncore: Correct fixed counter index check in generic code
perf/x86/intel/uncore: Correct fixed counter index check for NHM
perf/x86/intel/uncore: Introduce customized event_read() for client IMC uncore
perf/x86: Store user space frame-pointer value on a sample
perf/core: Wire up compat PERF_EVENT_IOC_QUERY_BPF, PERF_EVENT_IOC_MODIFY_ATTRIBUTES
perf/core: Fix bad use of igrab()
perf/core: Fix group scheduling with mixed hw and sw events
perf kcore_copy: Amend the offset of sections that remap kernel text
perf kcore_copy: Copy x86 PTI entry trampoline sections
perf kcore_copy: Get rid of kernel_map
perf kcore_copy: Iterate phdrs
perf kcore_copy: Layout sections
perf kcore_copy: Calculate offset from phnum
perf kcore_copy: Keep a count of phdrs
perf kcore_copy: Keep phdr data in a list
...
Linus Torvalds [Tue, 5 Jun 2018 00:12:50 +0000 (17:12 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Ingo Molnar:
"Leftover perf tooling fixes from the v4.17 cycle: they sync up updated
ABI headers with their tooling versions"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools intel-pt-decoder: Update insn.h from the kernel sources
tools headers: Sync x86 cpufeatures.h with the kernel sources
tools headers: Synchronize prctl.h ABI header
perf trace beauty prctl: Default header_dir to cwd to work without parms
Linus Torvalds [Mon, 4 Jun 2018 23:40:11 +0000 (16:40 -0700)]
Merge branch 'locking-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Lots of tidying up changes all across the map for Linux's formal
memory/locking-model tooling, by Alan Stern, Akira Yokosawa, Andrea
Parri, Paul E. McKenney and SeongJae Park.
Notable changes beyond an overall update in the tooling itself is the
tidying up of spin_is_locked() semantics, which spills over into the
kernel proper as well.
- qspinlock improvements: the locking algorithm now guarantees forward
progress whereas the previous implementation in mainline could starve
threads indefinitely in cmpxchg() loops. Also other related cleanups
to the qspinlock code (Will Deacon)
- misc smaller improvements, cleanups and fixes all across the locking
subsystem
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
locking/rwsem: Simplify the is-owner-spinnable checks
tools/memory-model: Add reference for 'Simplifying ARM concurrency'
tools/memory-model: Update ASPLOS information
MAINTAINERS, tools/memory-model: Update e-mail address for Andrea Parri
tools/memory-model: Fix coding style in 'lock.cat'
tools/memory-model: Remove out-of-date comments and code from lock.cat
tools/memory-model: Improve mixed-access checking in lock.cat
tools/memory-model: Improve comments in lock.cat
tools/memory-model: Remove duplicated code from lock.cat
tools/memory-model: Flag "cumulativity" and "propagation" tests
tools/memory-model: Add model support for spin_is_locked()
tools/memory-model: Add scripts to test memory model
tools/memory-model: Fix coding style in 'linux-kernel.def'
tools/memory-model: Model 'smp_store_mb()'
tools/memory-order: Update the cheat-sheet to show that smp_mb__after_atomic() orders later RMW operations
tools/memory-order: Improve key for SELF and SV
tools/memory-model: Fix cheat sheet typo
tools/memory-model: Update required version of herdtools7
tools/memory-model: Redefine rb in terms of rcu-fence
tools/memory-model: Rename link and rcu-path to rcu-link and rb
...
Linus Torvalds [Mon, 4 Jun 2018 23:31:06 +0000 (16:31 -0700)]
Merge branch 'efi-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
- decode x86 CPER data (Yazen Ghannam)
- ignore unrealistically large option ROMs (Hans de Goede)
- initialize UEFI secure boot state during Xen dom0 boot (Daniel Kiper)
- additional minor tweaks and fixes.
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/capsule-loader: Don't output reset log when reset flags are not set
efi/x86: Ignore unrealistically large option ROMs
efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function
efi: Align efi_pci_io_protocol typedefs to type naming convention
efi/libstub/tpm: Make function efi_retrieve_tpm2_eventlog_1_2() static
efi: Decode IA32/X64 Context Info structure
efi: Decode IA32/X64 MS Check structure
efi: Decode additional IA32/X64 Bus Check fields
efi: Decode IA32/X64 Cache, TLB, and Bus Check structures
efi: Decode UEFI-defined IA32/X64 Error Structure GUIDs
efi: Decode IA32/X64 Processor Error Info Structure
efi: Decode IA32/X64 Processor Error Section
efi: Fix IA32/X64 Processor Error Record definition
efi/cper: Remove the INDENT_SP silliness
x86/xen/efi: Initialize UEFI secure boot state during dom0 boot
Linus Torvalds [Mon, 4 Jun 2018 22:54:04 +0000 (15:54 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- updates to the handling of expedited grace periods
- updates to reduce lock contention in the rcu_node combining tree
[ These are in preparation for the consolidation of RCU-bh,
RCU-preempt, and RCU-sched into a single flavor, which was
requested by Linus in response to a security flaw whose root cause
included confusion between the multiple flavors of RCU ]
- torture-test updates that save their users some time and effort
- miscellaneous fixes
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rcu/x86: Provide early rcu_cpu_starting() callback
torture: Make kvm-find-errors.sh find build warnings
rcutorture: Abbreviate kvm.sh summary lines
rcutorture: Print end-of-test state in kvm.sh summary
rcutorture: Print end-of-test state
torture: Fold parse-torture.sh into parse-console.sh
torture: Add a script to edit output from failed runs
rcu: Update list of rcu_future_grace_period() trace events
rcu: Drop early GP request check from rcu_gp_kthread()
rcu: Simplify and inline cpu_needs_another_gp()
rcu: The rcu_gp_cleanup() function does not need cpu_needs_another_gp()
rcu: Make rcu_start_this_gp() check for out-of-range requests
rcu: Add funnel locking to rcu_start_this_gp()
rcu: Make rcu_start_future_gp() caller select grace period
rcu: Inline rcu_start_gp_advanced() into rcu_start_future_gp()
rcu: Clear request other than RCU_GP_FLAG_INIT at GP end
rcu: Cleanup, don't put ->completed into an int
rcu: Switch __rcu_process_callbacks() to rcu_accelerate_cbs()
rcu: Avoid __call_rcu_core() root rcu_node ->lock acquisition
rcu: Make rcu_migrate_callbacks wake GP kthread when needed
...
Linus Torvalds [Mon, 4 Jun 2018 22:50:22 +0000 (15:50 -0700)]
Merge tag 'm68k-for-v4.18-tag1' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- a few time-related fixes:
- off-by-one calendar month on some classes of machines
- Y2038 preparation
- build fix for ndelay() being called with a 64-bit type
- revive 64-bit get_user(), which is used by some Android code
- defconfig updates
- fix for a long-standing fatal bug in iounmap() on '020/030, which was
actually fixed in 2.4.23, but never in 2.5.x and later
- default DMA mask to avoid warning splats
- minor fixes and cleanups
* tag 'm68k-for-v4.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Set default dma mask for platform devices
m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()
m68k/defconfig: Update defconfigs for v4.17-rc3
m68k/uaccess: Revive 64-bit get_user()
m68k: Implement ndelay() as an inline function to force type checking/casting
zorro: Add a blank line after declarations
m68k: Use read_persistent_clock64() consistently
m68k: Fix off-by-one calendar month
m68k: Fix style, spelling, and grammar in siginfo_build_tests()
m68k/mac: Fix SWIM memory resource end address
Linus Torvalds [Mon, 4 Jun 2018 22:23:48 +0000 (15:23 -0700)]
Merge branch 'siginfo-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
Linus Torvalds [Mon, 4 Jun 2018 22:21:19 +0000 (15:21 -0700)]
Merge branch 'userns-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull userns updates from Eric Biederman:
"This is the last couple of vfs bits to enable root in a user namespace
to mount and manipulate a filesystem with backing store (AKA not a
virtual filesystem like proc, but a filesystem where the unprivileged
user controls the content). The target filesystem for this work is
fuse, and Miklos should be sending you the pull request for the fuse
bits this merge window.
The two key patches are "evm: Don't update hmacs in user ns mounts"
and "vfs: Don't allow changing the link count of an inode with an
invalid uid or gid". Those close small gaps in the vfs that would be a
problem if an unprivileged fuse filesystem is mounted.
The rest of the changes are things that are now safe to allow a root
user in a user namespace to do with a filesystem they have mounted.
The most interesting development is that remount is now safe"
* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
fs: Allow CAP_SYS_ADMIN in s_user_ns to freeze and thaw filesystems
capabilities: Allow privileged user in s_user_ns to set security.* xattrs
fs: Allow superblock owner to access do_remount_sb()
fs: Allow superblock owner to replace invalid owners of inodes
vfs: Allow userns root to call mknod on owned filesystems.
vfs: Don't allow changing the link count of an inode with an invalid uid or gid
evm: Don't update hmacs in user ns mounts
Linus Torvalds [Mon, 4 Jun 2018 21:42:46 +0000 (14:42 -0700)]
Merge tag '4.18-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- smb3 fixes for stable
- addition of ftrace hooks for cifs.ko
- improvements in compounding and smbdirect (rdma)
* tag '4.18-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (38 commits)
CIFS: Add support for direct pages in wdata
CIFS: Use offset when reading pages
CIFS: Add support for direct pages in rdata
cifs: update multiplex loop to handle compounded responses
cifs: remove header_preamble_size where it is always 0
cifs: remove struct smb2_hdr
CIFS:
511c54a2f69195b28afb9dd119f03787b1625bb4 adds a check for session expiry, status STATUS_NETWORK_SESSION_EXPIRED, however the server can also respond with STATUS_USER_SESSION_DELETED in cases where the session has been idle for some time and the server reaps the session to recover resources.
cifs: change smb2_get_data_area_len to take a smb2_sync_hdr as argument
cifs: update smb2_calc_size to use smb2_sync_hdr instead of smb2_hdr
cifs: remove struct smb2_oplock_break_rsp
cifs: remove rfc1002 header from all SMB2 response structures
smb3: on reconnect set PreviousSessionId field
smb3: Add posix create context for smb3.11 posix mounts
smb3: add tracepoints for smb2/smb3 open
cifs: add debug output to show nocase mount option
smb3: add define for id for posix create context and corresponding struct
cifs: update smb2_check_message to handle PDUs without a 4 byte length header
smb3: allow "posix" mount option to enable new SMB311 protocol extensions
smb3: add support for posix negotiate context
cifs: allow disabling less secure legacy dialects
...
Linus Torvalds [Mon, 4 Jun 2018 21:36:38 +0000 (14:36 -0700)]
Merge tag 'gfs2-4.18.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got nine more patches for this merge window.
- remove sd_jheightsize to greatly simplify some code (Andreas
Gruenbacher)
- fix some comments (Andreas)
- fix a glock recursion bug when allocation errors occur (Andreas)
- improve the hole_size function so it returns the entire hole rather
than figuring it out piecemeal (Andreas)
- clean up gfs2_stuffed_write_end to remove a lot of redundancy
(Andreas)
- clarify code with regard to the way ordered writes are processed
(Andreas)
- a bunch of improvements and cleanups of the iomap code to pave the
way for iomap writes, which is a future patch set (Andreas)
- fix a bug where block reservations can run off the end of a bitmap
(Bob Peterson)
- add Andreas to the MAINTAINERS file (Bob Peterson)"
* tag 'gfs2-4.18.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
MAINTAINERS: Add Andreas Gruenbacher as a maintainer for gfs2
gfs2: Iomap cleanups and improvements
gfs2: Remove ordered write mode handling from gfs2_trans_add_data
gfs2: gfs2_stuffed_write_end cleanup
gfs2: hole_size improvement
GFS2: gfs2_free_extlen can return an extent that is too long
GFS2: Fix allocation error bug with recursive rgrp glocking
gfs2: Update find_metapath comment
gfs2: Remove sdp->sd_jheightsize
Linus Torvalds [Mon, 4 Jun 2018 21:34:06 +0000 (14:34 -0700)]
Merge tag 'dlm-4.18' of git://git./linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"These three commits fix and clean up the flags dlm was using on its
SCTP sockets. This improves performance and fixes some bad connection
delays"
* tag 'dlm-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: remove O_NONBLOCK flag in sctp_connect_to_sock
dlm: make sctp_connect_to_sock() return in specified time
dlm: fix a clerical error when set SCTP_NODELAY
Linus Torvalds [Mon, 4 Jun 2018 21:29:13 +0000 (14:29 -0700)]
Merge tag 'for-4.18-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible features:
- added support for the ioctl FS_IOC_FSGETXATTR, per-inode flags,
successor of GET/SETFLAGS; now supports only existing flags:
append, immutable, noatime, nodump, sync
- 3 new unprivileged ioctls to allow users to enumerate subvolumes
- dedupe syscall implementation does not restrict the range to 16MiB,
though it still splits the whole range to 16MiB chunks
- on user demand, rmdir() is able to delete an empty subvolume,
export the capability in sysfs
- fix inode number types in tracepoints, other cleanups
- send: improved speed when dealing with a large removed directory,
measurements show decrease from 2000 minutes to 2 minutes on a
directory with 2 million entries
- pre-commit check of superblock to detect a mysterious in-memory
corruption
- log message updates
Other changes:
- orphan inode cleanup improved, does no keep long-standing
reservations that could lead up to early ENOSPC in some cases
- slight improvement of handling snapshotted NOCOW files by avoiding
some unnecessary tree searches
- avoid OOM when dealing with many unmergeable small extents at flush
time
- speedup conversion of free space tree representations from/to
bitmap/tree
- code refactoring, deletion, cleanups:
+ delayed refs
+ delayed iput
+ redundant argument removals
+ memory barrier cleanups
+ remove a redundant mutex supposedly excluding several ioctls to
run in parallel
- new tracepoints for blockgroup manipulation
- more sanity checks of compressed headers"
* tag 'for-4.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (183 commits)
btrfs: Add unprivileged version of ino_lookup ioctl
btrfs: Add unprivileged ioctl which returns subvolume's ROOT_REF
btrfs: Add unprivileged ioctl which returns subvolume information
Btrfs: clean up error handling in btrfs_truncate()
btrfs: Factor out write portion of btrfs_get_blocks_direct
btrfs: Factor out read portion of btrfs_get_blocks_direct
btrfs: return ENOMEM if path allocation fails in btrfs_cross_ref_exist
btrfs: raid56: Remove VLA usage
btrfs: return error value if create_io_em failed in cow_file_range
btrfs: drop useless member qgroup_reserved of btrfs_pending_snapshot
btrfs: drop unused parameter qgroup_reserved
btrfs: balance dirty metadata pages in btrfs_finish_ordered_io
btrfs: lift some btrfs_cross_ref_exist checks in nocow path
btrfs: Remove fs_info argument from btrfs_uuid_tree_rem
btrfs: Remove fs_info argument from btrfs_uuid_tree_add
Btrfs: remove unused check of skip_locking
Btrfs: remove always true check in unlock_up
Btrfs: grab write lock directly if write_lock_level is the max level
Btrfs: move get root out of btrfs_search_slot to a helper
Btrfs: use more straightforward extent_buffer_uptodate check
...
Linus Torvalds [Mon, 4 Jun 2018 21:27:09 +0000 (14:27 -0700)]
Merge tag 'affs-for-4.18-tag' of git://git./linux/kernel/git/kdave/linux
Pull affs fix from David Sterba:
"A potential memory leak fix for AFFS"
* tag 'affs-for-4.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: fix potential memory leak when parsing option 'prefix'
Linus Torvalds [Mon, 4 Jun 2018 20:57:43 +0000 (13:57 -0700)]
Merge branch 'work.aio-1' of git://git./linux/kernel/git/viro/vfs
Pull aio updates from Al Viro:
"Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly.
The only thing I'm holding back for a day or so is Adam's aio ioprio -
his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case),
but let it sit in -next for decency sake..."
* 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
aio: sanitize the limit checking in io_submit(2)
aio: fold do_io_submit() into callers
aio: shift copyin of iocb into io_submit_one()
aio_read_events_ring(): make a bit more readable
aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way
aio: take list removal to (some) callers of aio_complete()
aio: add missing break for the IOCB_CMD_FDSYNC case
random: convert to ->poll_mask
timerfd: convert to ->poll_mask
eventfd: switch to ->poll_mask
pipe: convert to ->poll_mask
crypto: af_alg: convert to ->poll_mask
net/rxrpc: convert to ->poll_mask
net/iucv: convert to ->poll_mask
net/phonet: convert to ->poll_mask
net/nfc: convert to ->poll_mask
net/caif: convert to ->poll_mask
net/bluetooth: convert to ->poll_mask
net/sctp: convert to ->poll_mask
net/tipc: convert to ->poll_mask
...
Linus Torvalds [Mon, 4 Jun 2018 20:46:22 +0000 (13:46 -0700)]
Merge branch 'work.lookup' of git://git./linux/kernel/git/viro/vfs
Pull dcache lookup cleanups from Al Viro:
"Cleaning ->lookup() instances up - mostly d_splice_alias() conversions"
* 'work.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (29 commits)
switch the rest of procfs lookups to d_splice_alias()
procfs: switch instantiate_t to d_splice_alias()
don't bother with tid_fd_revalidate() in lookups
proc_lookupfd_common(): don't bother with instantiate unless the file is open
procfs: get rid of ancient BS in pid_revalidate() uses
cifs_lookup(): switch to d_splice_alias()
cifs_lookup(): cifs_get_inode_...() never returns 0 with *inode left NULL
9p: unify paths in v9fs_vfs_lookup()
ncp_lookup(): use d_splice_alias()
hfsplus: switch to d_splice_alias()
hfs: don't allow mounting over .../rsrc
hfs: use d_splice_alias()
omfs_lookup(): report IO errors, use d_splice_alias()
orangefs_lookup: simplify
openpromfs: switch to d_splice_alias()
xfs_vn_lookup: simplify a bit
adfs_lookup: do not fail with ENOENT on negatives, use d_splice_alias()
adfs_lookup_byname: .. *is* taken care of in fs/namei.c
romfs_lookup: switch to d_splice_alias()
qnx6_lookup: switch to d_splice_alias()
...
Linus Torvalds [Mon, 4 Jun 2018 20:05:02 +0000 (13:05 -0700)]
Merge tag 'locks-v4.18-1' of git://git./linux/kernel/git/jlayton/linux
Pull fasync fix from Jeff Layton:
"Just a single fix for a deadlock in the fasync handling code that
Kirill observed while testing.
The fix is to change the fa_lock to be rwlock_t, and use a read lock
in kill_fasync_rcu"
* tag 'locks-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fasync: Fix deadlock between task-context and interrupt-context kill_fasync()
Linus Torvalds [Mon, 4 Jun 2018 19:34:27 +0000 (12:34 -0700)]
Merge tag 'docs-4.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of work in the docs tree this time around,
including:
- Extensive RST conversions and organizational work in the
memory-management docs thanks to Mike Rapoport.
- An update of Documentation/features from Andrea Parri and a script
to keep it updated.
- Various LICENSES updates from Thomas, along with a script to check
SPDX tags.
- Work to fix dangling references to documentation files; this
involved a fair number of one-liner comment changes outside of
Documentation/
... and the usual list of documentation improvements, typo fixes, etc"
* tag 'docs-4.18' of git://git.lwn.net/linux: (103 commits)
Documentation: document hung_task_panic kernel parameter
docs/admin-guide/mm: add high level concepts overview
docs/vm: move ksm and transhuge from "user" to "internals" section.
docs: Use the kerneldoc comments for memalloc_no*()
doc: document scope NOFS, NOIO APIs
docs: update kernel versions and dates in tables
docs/vm: transhuge: split userspace bits to admin-guide/mm/transhuge
docs/vm: transhuge: minor updates
docs/vm: transhuge: change sections order
Documentation: arm: clean up Marvell Berlin family info
Documentation: gpio: driver: Fix a typo and some odd grammar
docs: ranoops.rst: fix location of ramoops.txt
scripts/documentation-file-ref-check: rewrite it in perl with auto-fix mode
docs: uio-howto.rst: use a code block to solve a warning
mm, THP, doc: Add document for thp_swpout/thp_swpout_fallback
w1: w1_io.c: fix a kernel-doc warning
Documentation/process/posting: wrap text at 80 cols
docs: admin-guide: add cgroup-v2 documentation
Revert "Documentation/features/vm: Remove arch support status file for 'pte_special'"
Documentation: refcount-vs-atomic: Update reference to LKMM doc.
...
Linus Torvalds [Mon, 4 Jun 2018 19:01:15 +0000 (12:01 -0700)]
swait: strengthen language to discourage use
We already earlier discouraged people from using this interface in
commit
88796e7e5c45 ("sched/swait: Document it clearly that the swait
facilities are special and shouldn't be used"), but I just got a pull
request with a new broken user.
So make the comment *really* clear.
The swait interfaces are bad, and should not be used unless you have
some *very* strong reasons that include tons of hard performance numbers
on just why you want to use them, and you show that you actually
understand that they aren't at all like the normal wait/wakeup
interfaces.
So far, every single user has been suspect. The main user is KVM, which
is completely pointless (there is only ever one waiter, which avoids the
interface subtleties, but also means that having a queue instead of a
pointer is counter-productive and certainly not an "optimization").
So make the comments much stronger.
Not that anybody likely reads them anyway, but there's always some
slight hope that it will cause somebody to think twice.
I'd like to remove this interface entirely, but there is the theoretical
possibility that it's actually the right thing to use in some situation,
most likely some deep RT use.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 4 Jun 2018 18:38:16 +0000 (11:38 -0700)]
Merge tag 'regmap-v4.18' of git://git./linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is another quiet release for regmap, there's one minor feature
improvement for the recently added slimbus support and a few minor
fixes and cleanups"
* tag 'regmap-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: slimbus: allow register offsets up to 16 bits
regmap: add missing prototype for devm_init_slimbus
regmap: Skip clk_put for attached clocks when freeing context
regmap: include <linux/ktime.h> from include/linux/regmap.h
Linus Torvalds [Mon, 4 Jun 2018 18:34:06 +0000 (11:34 -0700)]
Merge tag 'spi-v4.18' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Quite a busy release for SPI, mainly as a result of Boris Brezillon's
work on improving the integration with MTD for accelerated SPI flash
controllers. He's added a new spi_mem interface which works a lot
better with general hardware and converted the users over to it, as a
result of this work we've got some MTD changes in here as well.
Other highlights include:
- Lots of spring cleaning for the s3c64xx driver.
- Removal of the bcm53xx, the hardware is also supported by the mspi
driver but SoC naming had caused people to miss the duplication.
- Conversion of the pxa2xx driver to use the standard message
processing loop rather than open coding.
- A bunch of improvements to the runtime PM of the OMAP McSPI driver"
* tag 'spi-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
spi: Fix typo on SPI_MEM help text
spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCAC
mtd: devices: m25p80: Use spi_mem_set_drvdata() instead of spi_set_drvdata()
spi: omap2-mcspi: Remove unnecessary pm_runtime_force_suspend()
spi: Add missing pm_runtime_put_noidle() after failed get
spi: ti-qspi: Make sure res_mmap != NULL before dereferencing it
spi: spi-s3c64xx: Fix system resume support
spi: bcm-qspi: Fix build failure caused by spi_flash_read() API removal
spi: Get rid of the spi_flash_read() API
mtd: spi-nor: Use the spi_mem_xx() API
spi: ti-qspi: Implement the spi_mem interface
spi: bcm-qspi: Implement the spi_mem interface
spi: Make support for regular transfers optional when ->mem_ops != NULL
spi: Extend the core to ease integration of SPI memory controllers
spi: remove forgotten CONFIG_SPI_BCM53XX
spi: remove the older/duplicated bcm53xx driver
spi: pxa2xx: check clk_prepare_enable() return value
spi: lpspi: Switch to SPDX identifier
spi: mxs: Switch to SPDX identifier
spi: imx: Switch to SPDX identifier
...
Linus Torvalds [Mon, 4 Jun 2018 18:28:58 +0000 (11:28 -0700)]
Merge tag 'chrome-platform-for-linus-4.18' of git://git./linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- further changes from Dmitry related to the removal of platform data
from atmel_mxt_ts and chromeos_laptop.
This time, we have some changes that teach chromeos_laptop how to
supply acpi properties for some input devices so that the peripheral
driver doesn't have to do dmi matching on some Chromebook platforms.
- new Chromebook Tablet switch driver, which is useful for x86
convertible Chromebooks.
- other misc cleanup
* tag 'chrome-platform-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: Use to_cros_ec_dev more broadly
platform/chrome: chromeos_laptop: fix touchpad button mapping on Celes
platform: chrome: Add input dependency for tablet switch driver
platform/chrome: chromeos_laptop - supply properties for ACPI devices
platform/chrome: chromeos_tbmc - add SPDX identifier
platform: chrome: Add Tablet Switch ACPI driver
platform/chrome: cros_ec_lpc: do not try DMI match when ACPI device found
Linus Torvalds [Mon, 4 Jun 2018 18:25:15 +0000 (11:25 -0700)]
Merge tag 'hwmon-for-linus-v4.18' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- asus_atk0110 driver modified to use new API
- k10temp supports new CPUs and reports both Tctl and Tdie
- minor fixes in gpio-fan, ltc2990, fschmd, and mc13783 drivers
* tag 'hwmon-for-linus-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus_atk0110) Make use of device managed memory
hwmon: (asus_atk0110) Replace deprecated device register call
hwmon: (k10temp) Make function get_raw_temp static
hwmon: (gpio-fan) Fix "#cooling-cells" property name in bindings
MAINTAINERS: hwmon: Add Documentation/devicetree/bindings/hwmon
hwmon: (ltc2990) support all measurement modes
hwmon: (ltc2990) add devicetree binding
hwmon: (ltc2990) Fix incorrect conversion of negative temperatures
hwmon: (core) check parent dev != NULL when chip != NULL
hwmon: (fschmd) fix typo 'can by' to 'can be'
hwmon: (k10temp) Display both Tctl and Tdie
hwmon: (k10temp) Add support for Stoney Ridge and Bristol Ridge CPUs
hwmon: MC13783: Add uid and die temperature sensor inputs
Linus Torvalds [Mon, 4 Jun 2018 17:58:12 +0000 (10:58 -0700)]
Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- replace the force_dma flag with a dma_configure bus method. (Nipun
Gupta, although one patch is Ñ–ncorrectly attributed to me due to a
git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few
cleanups to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
dma-direct: don't crash on device without dma_mask
nds32: use generic dma_noncoherent_ops
nds32: implement the unmap_sg DMA operation
nds32: consolidate DMA cache maintainance routines
x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
x86/pci-dma: remove the explicit nodac and allowdac option
x86/pci-dma: remove the experimental forcesac boot option
Documentation/x86: remove a stray reference to pci-nommu.c
core, dma-direct: add a flag 32-bit dma limits
dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
dma-debug: check scatterlist segments
c6x: use generic dma_noncoherent_ops
arc: use generic dma_noncoherent_ops
arc: fix arc_dma_{map,unmap}_page
arc: fix arc_dma_sync_sg_for_{cpu,device}
arc: simplify arc_dma_sync_single_for_{cpu,device}
dma-mapping: provide a generic dma-noncoherent implementation
dma-mapping: simplify Kconfig dependencies
riscv: add swiotlb support
riscv: only enable ZONE_DMA32 for 64-bit
...
Linus Torvalds [Mon, 4 Jun 2018 17:14:28 +0000 (10:14 -0700)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Misc bits and pieces not fitting into anything more specific"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: delete unnecessary assignment in vfs_listxattr
Documentation: filesystems: update filesystem locking documentation
vfs: namei: use path_equal() in follow_dotdot()
fs.h: fix outdated comment about file flags
__inode_security_revalidate() never gets NULL opt_dentry
make xattr_getsecurity() static
vfat: simplify checks in vfat_lookup()
get rid of dead code in d_find_alias()
it's SB_BORN, not MS_BORN...
msdos_rmdir(): kill BS comment
remove rpc_rmdir()
fs: avoid fdput() after failed fdget() in vfs_dedupe_file_range()
Linus Torvalds [Mon, 4 Jun 2018 17:00:01 +0000 (10:00 -0700)]
Merge branch 'hch.procfs' of git://git./linux/kernel/git/viro/vfs
Pull procfs updates from Al Viro:
"Christoph's proc_create_... cleanups series"
* 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits)
xfs, proc: hide unused xfs procfs helpers
isdn/gigaset: add back gigaset_procinfo assignment
proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields
tty: replace ->proc_fops with ->proc_show
ide: replace ->proc_fops with ->proc_show
ide: remove ide_driver_proc_write
isdn: replace ->proc_fops with ->proc_show
atm: switch to proc_create_seq_private
atm: simplify procfs code
bluetooth: switch to proc_create_seq_data
netfilter/x_tables: switch to proc_create_seq_private
netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data
neigh: switch to proc_create_seq_data
hostap: switch to proc_create_{seq,single}_data
bonding: switch to proc_create_seq_data
rtc/proc: switch to proc_create_single_data
drbd: switch to proc_create_single
resource: switch to proc_create_seq_data
staging/rtl8192u: simplify procfs code
jfs: simplify procfs code
...
Linus Torvalds [Mon, 4 Jun 2018 16:53:33 +0000 (09:53 -0700)]
Merge branch 'work.rmdir' of git://git./linux/kernel/git/viro/vfs
Pull rmdir update from Al Viro:
"More shrink_dcache_parent()-related stuff - killing the main source of
potentially contended calls of that on large subtrees"
* 'work.rmdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
rmdir(),rename(): do shrink_dcache_parent() only on success
Linus Torvalds [Mon, 4 Jun 2018 15:57:36 +0000 (08:57 -0700)]
Merge branch 'work.dcache' of git://git./linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"This is the first part of dealing with livelocks etc around
shrink_dcache_parent()."
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
restore cond_resched() in shrink_dcache_parent()
dput(): turn into explicit while() loop
dcache: move cond_resched() into the end of __dentry_kill()
d_walk(): kill 'finish' callback
d_invalidate(): unhash immediately
Linus Torvalds [Mon, 4 Jun 2018 14:58:06 +0000 (07:58 -0700)]
Merge tag 'for-4.18/block-
20180603' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- clean up how we pass around gfp_t and
blk_mq_req_flags_t (Christoph)
- prepare us to defer scheduler attach (Christoph)
- clean up drivers handling of bounce buffers (Christoph)
- fix timeout handling corner cases (Christoph/Bart/Keith)
- bcache fixes (Coly)
- prep work for bcachefs and some block layer optimizations (Kent).
- convert users of bio_sets to using embedded structs (Kent).
- fixes for the BFQ io scheduler (Paolo/Davide/Filippo)
- lightnvm fixes and improvements (Matias, with contributions from Hans
and Javier)
- adding discard throttling to blk-wbt (me)
- sbitmap blk-mq-tag handling (me/Omar/Ming).
- remove the sparc jsflash block driver, acked by DaveM.
- Kyber scheduler improvement from Jianchao, making it more friendly
wrt merging.
- conversion of symbolic proc permissions to octal, from Joe Perches.
Previously the block parts were a mix of both.
- nbd fixes (Josef and Kevin Vigor)
- unify how we handle the various kinds of timestamps that the block
core and utility code uses (Omar)
- three NVMe pull requests from Keith and Christoph, bringing AEN to
feature completeness, file backed namespaces, cq/sq lock split, and
various fixes
- various little fixes and improvements all over the map
* tag 'for-4.18/block-
20180603' of git://git.kernel.dk/linux-block: (196 commits)
blk-mq: update nr_requests when switching to 'none' scheduler
block: don't use blocking queue entered for recursive bio submits
dm-crypt: fix warning in shutdown path
lightnvm: pblk: take bitmap alloc. out of critical section
lightnvm: pblk: kick writer on new flush points
lightnvm: pblk: only try to recover lines with written smeta
lightnvm: pblk: remove unnecessary bio_get/put
lightnvm: pblk: add possibility to set write buffer size manually
lightnvm: fix partial read error path
lightnvm: proper error handling for pblk_bio_add_pages
lightnvm: pblk: fix smeta write error path
lightnvm: pblk: garbage collect lines with failed writes
lightnvm: pblk: rework write error recovery path
lightnvm: pblk: remove dead function
lightnvm: pass flag on graceful teardown to targets
lightnvm: pblk: check for chunk size before allocating it
lightnvm: pblk: remove unnecessary argument
lightnvm: pblk: remove unnecessary indirection
lightnvm: pblk: return NVM_ error on failed submission
lightnvm: pblk: warn in case of corrupted write buffer
...
Bob Peterson [Mon, 4 Jun 2018 14:05:50 +0000 (09:05 -0500)]
MAINTAINERS: Add Andreas Gruenbacher as a maintainer for gfs2
Add Andreas Gruenbacher as a maintainer for the gfs2 file system
and remove Steve Whitehouse.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 17:34:40 +0000 (14:34 -0300)]
perf report: No need to have report_callchain_help as a global
It is used in a single place, move the declaration to that function.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p650ofrl8xike4dewxod51gg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Mon, 28 May 2018 13:48:17 +0000 (15:48 +0200)]
perf test: Use header file util/debug.h
Use the header file util/debug.h instead of declaration of verbose
variable.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528134817.36643-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 17:24:45 +0000 (14:24 -0300)]
perf annotate: Move objdump_path to struct annotation_options
One more step in grouping annotation options.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-sogzdhugoavm6fyw60jnb0vs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 16:54:59 +0000 (13:54 -0300)]
perf hists browser: Pass annotation_options from tool to browser
So that things changed in the command line may percolate to the browser
code without using globals.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5daawc40zhl6gcs600com1ua@git.kernel.org
[ Merged fix for NO_SLANG=1 build provided by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 14:50:21 +0000 (11:50 -0300)]
perf annotate: Move disassembler_style global to annotation_options
Continuing to group annotation specific stuff into a struct.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p3cdhltj58jt0byjzg3g7obx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 14:42:59 +0000 (11:42 -0300)]
perf annotate: Adopt anotation options from symbol_conf
Continuing to group annotation options in an annotation specific struct.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-astei92tzxp4yccag5pxb2h7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 14:27:40 +0000 (11:27 -0300)]
perf annotate: Pass annotation_options to symbol__annotate()
Now all callers to symbol__disassemble() can hand it the per-tool
annotation_options, which will allow us to remove lots of stuff
from symbol_options, the kitchen sink of perf configs, reducing its
size and getting annotation specific stuff grouped together.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vpr7ys7ggvs2fzpg8wbjcw7e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 14:06:58 +0000 (11:06 -0300)]
perf srcline: Make hist_entry srcline helper consistent with map's
No need to have "get_srcline", plain hist_entry__srcline() is enough and
shorter.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-irhzpfmgdaf6cyk0uqqexoh9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 14:11:47 +0000 (11:11 -0300)]
perf sort: Introduce addr_map_symbol__srcline() to make code more compact
Since we have 'struct addr_map_symbol' and the srcline sort order keys
all operate on those, make the code more compact by introducing a
function that receives a pointer to such struct and expands the
arguments to map__srcline().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j540wq7n3ukkh70gk5be0in5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 28 May 2018 14:05:20 +0000 (11:05 -0300)]
perf srcline: Introduce map__srcline() to make code more compact
Replacing a common open coded sequence.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2d7d1nzd3ksqornloqeer99r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 May 2018 20:28:37 +0000 (17:28 -0300)]
perf annotate stdio: Use annotation_options consistently
Accross all the routines, this way we can have eventually have a
consistent set of defaults for all UIs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6qgtixurjgdk5u0n3rw78ges@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 May 2018 14:27:38 +0000 (11:27 -0300)]
perf annotate: Add comment about annotated_src->nr_histograms
When we have multiple groups in an evlist, say:
$ perf stat -e '{cycles,instructions},{cache-references,cache-misses}' sleep 1
Performance counter stats for 'sleep 1':
343,134 cycles:u
249,292 instructions:u # 0.73 insn per cycle
15,556 cache-references:u
8,925 cache-misses:u # 57.373 % of all cache refs
1.
000957550 seconds time elapsed
$
Then the perf_evsel instances for the two group leaders ("cycles" and
"cache-references") will have evsel->nr_members set to 2, while all the
evsel->evlist->nr_entries will be set to 4, so we can't use
evsel->evlist->nr_entries everywhere, as event groups need to be taken
into account.
But this probably requires us to audit at least the forced-group code,
where we want all of the events to be in a "group", to see them all in
the screen, one column for each, even knowing that they were not
necessarily scheduled to count at the same time by the kernel perf
subsystem.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2g0vwqnc49wl4ttjk8dvpgcc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 20:38:51 +0000 (17:38 -0300)]
perf tools: Ditch the symbol_conf.nr_events global
Since over time the places where we need to pass this got reduced
because we can obtain it from evsel->evlist->nr_entries, no need to have
this global anymore.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ovhikrfj8pzdv93yq3gt6sei@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 20:33:18 +0000 (17:33 -0300)]
perf annotate: Replace symbol__alloc_hists() with symbol__hists()
Its a bit shorter, so ditch the old symbol__alloc_hists() function.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-m7tienxk7dijh5ln62yln1m9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 20:20:53 +0000 (17:20 -0300)]
perf annotate: Stop using symbol_conf.nr_events global in symbol__hists()
Since now we have evsel->evlist->nr_entries in the single place calling
this function, use it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9mgosbqa977h39j4i9ys8t75@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 20:17:05 +0000 (17:17 -0300)]
perf annotate: Introduce symbol__cycle_hists()
In this case we're wanting just notes->src->cycles_hist, allocating it if needed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-pqj81aneunhftlntm66tmhz0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 19:37:53 +0000 (16:37 -0300)]
perf annotate: Introduce symbol__hists()
In this case we're wanting just notes->src->histograms, allocating it if needed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4iatualjskia7sojmdb65cmm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 19:28:29 +0000 (16:28 -0300)]
perf annotate: __symbol__inc_addr_samples() needs just annotated_source
It only operates on the histograms, so no need for the encompassing
'struct annotation'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2se2v7rrjil0kwqywks04ey2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 19:23:08 +0000 (16:23 -0300)]
perf annotate: Introduce annotated_source__alloc_histograms
So that we can call it independently, in contexts were we know we
already have notes->src allocated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-f5fn7tr1asey6g013wavpn4c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 19:01:31 +0000 (16:01 -0300)]
perf annotate: Introduce constructor/destructor for annotated_source
More stuff will go in there, all the parts that are not needed when a
symbol had no samples and that were mistakenly added to 'struct
annotation'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-u4761kyzhixw9ydk6kib3f0o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 18:31:40 +0000 (15:31 -0300)]
perf annotate: Split allocation of annotated_source struct
So that we can allocate just the notes->src->cyc_hist, that, unlike
notes->src->histograms, is not per event, and in paths where we
need to lazily allocate notes->src->cyc_hist we don't have the
number of events handy to also allocate ->histograms.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-tsx7dhxzpi0criyx0sio3pz3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 18:20:18 +0000 (15:20 -0300)]
perf annotate: __symbol__acount_cycles doesn't need notes
It only operates on the notes->src->cyc_hist, just pass that to it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zd1cu4zwmu21k0cxlr83y6vr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 15:05:39 +0000 (12:05 -0300)]
perf annotate: Pass perf_evsel instead of just evsel->idx
The code gets shorter and we'll be able to use evsel->evlist in a
followup patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-t0s7vy19wq5kak74kavm8swf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 14:20:39 +0000 (11:20 -0300)]
perf tools: No need to check if the argument to __get() function is NULL
Those functions always check if the argument is NULL before trying to
grab a reference count, and also will return the received object, so, to
make code more compact, no need to check for NULL.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i9wycjdxh0fwhryu55lmafks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 14:29:07 +0000 (11:29 -0300)]
perf cgroup: Make evlist__find_cgroup() more compact
By taking advantage that __get() routines return the pointer to the
object for which a reference count is being get.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-xnvd07rdxliy04oi062samik@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 14:17:34 +0000 (11:17 -0300)]
perf probe: Use return of map__get() to make code more compact
The __get() idiom returns a reference count for the object passed, i.e.
all functions of this type return the object passed, so take advantage
of that to make the code more compact.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ds6vdm7clh070512rpydidsc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 May 2018 13:49:25 +0000 (10:49 -0300)]
perf tools: Remove dead quote.[ch] code
In
c68677014bac ("perf tools: Remove support for command aliases") we
removed the only remaining use of a function provided by these files, so
ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mgnzqbi46gucs48d7bzfwr55@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Jun 2018 13:28:20 +0000 (10:28 -0300)]
Merge remote-tracking branch 'tip/perf/urgent' into perf/core
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andreas Gruenbacher [Mon, 4 Jun 2018 12:56:51 +0000 (07:56 -0500)]
gfs2: Iomap cleanups and improvements
Clean up gfs2_iomap_alloc and gfs2_iomap_get. Document how
gfs2_iomap_alloc works: it now needs to be called separately after
gfs2_iomap_get where necessary; this will be used later by iomap write.
Move gfs2_iomap_ops into bmap.c.
Introduce a new gfs2_iomap_get_alloc helper and use it in
fallocate_chunk: gfs2_iomap_begin will become unsuitable for fallocate
with proper iomap write support.
In gfs2_block_map and fallocate_chunk, zero-initialize struct iomap.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Andreas Gruenbacher [Mon, 4 Jun 2018 12:50:16 +0000 (07:50 -0500)]
gfs2: Remove ordered write mode handling from gfs2_trans_add_data
In journaled data mode, we need to add each buffer head to the current
transaction. In ordered write mode, we only need to add the inode to
the ordered inode list. So far, both cases are handled in
gfs2_trans_add_data. This makes the code look misleading and is
inefficient for small block sizes as well. Handle both cases separately
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Andreas Gruenbacher [Mon, 4 Jun 2018 12:45:53 +0000 (07:45 -0500)]
gfs2: gfs2_stuffed_write_end cleanup
First, change the sanity check in gfs2_stuffed_write_end to check for
the actual write size instead of the requested write size.
Second, use the existing teardown code in gfs2_write_end instead of
duplicating it in gfs2_stuffed_write_end.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Andreas Gruenbacher [Mon, 4 Jun 2018 12:39:23 +0000 (07:39 -0500)]
gfs2: hole_size improvement
Reimplement function hole_size based on a generic function for walking
the metadata tree and rename hole_size to gfs2_hole_size. While
previously, multiple invocations of hole_size were sometimes needed to
walk across the entire hole, the new implementation always returns the
entire hole at once (provided that the caller is interested in the total
size).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Bob Peterson [Sat, 2 Jun 2018 03:09:50 +0000 (22:09 -0500)]
GFS2: gfs2_free_extlen can return an extent that is too long
Function gfs2_free_extlen calculates the length of an extent of
free blocks that may be reserved. The end pointer was calculated as
end = start + bh->b_size but b_size is incorrect because the
bitmap usually stops prior to the end of the buffer data on
the last bitmap.
What this means is that when you do a write, you can reserve a
chunk of blocks that runs off the end of the last bitmap. For
example, I've got a file system where there is only one bitmap
for each rgrp, so ri_length==1. I saw cases in which iozone
tried to do a big write, grabbed a large block reservation,
chose rgrp
5464152, which has ri_data0
5464153 and ri_data 8188.
So
5464153 + 8188 =
5472341 which is the end of the rgrp.
When it grabbed a reservation it got back:
5470936, length 7229.
But
5470936 + 7229 =
5478165. So the reservation starts inside
the rgrp but runs 5824 blocks past the end of the bitmap.
This patch fixes the calculation so it won't exceed the last
bitmap. It also adds a BUG_ON to guard against overflows in the
future.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Andreas Gruenbacher [Thu, 31 May 2018 12:20:55 +0000 (07:20 -0500)]
GFS2: Fix allocation error bug with recursive rgrp glocking
Before this patch function gfs2_write_begin, upon discovering an
error, called gfs2_trim_blocks while the rgrp glock was still held.
That's because gfs2_inplace_release is not called until later.
This patch reorganizes the logic a bit so gfs2_inplace_release
is called to release the lock prior to the call to gfs2_trim_blocks,
thus preventing the glock recursion.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>