OSDN Git Service
Or Gerlitz [Tue, 6 Mar 2012 04:04:02 +0000 (04:04 +0000)]
net/mlx4: fix sparse warnings on TX blue flame buffer
The blue flame buffer is defined to be of type void __iomem *
but was passed to mlx4_bf_copy which gets unsigned long * .
This triggered sparse warning on different address spaces,
fix that by changing mlx4_bf_copy first param to be of type void __iomem * .
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Tue, 6 Mar 2012 04:03:41 +0000 (04:03 +0000)]
net/mlx4: fix sparse warnings on TX control flags, endianess
Fix sparse warnings on incompatibility between the endianess of the ctrl_flags
field of struct mlx4_en_priv to the srcrb_flags field of struct
mlx4_wqe_ctrl_seg by changing the former to be __be32 instead of u32.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevgeny Petrilin [Tue, 6 Mar 2012 04:03:34 +0000 (04:03 +0000)]
net/mlx4_en: Saving mem access on data path
Localized the pdev->dev, and using dma_map instead of pci_map
There are multiple map/unmap operations on data path,
optimizing those by saving redundant pointer access.
Those places were identified as hot-spots when running kernel profiling
during some benchmarks.
The fixes had most impact when testing packet rate with small packets,
reducing several % from CPU load, and in some case being the difference
between reaching wire speed or being CPU bound.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Santosh Nayak [Fri, 2 Mar 2012 05:09:39 +0000 (05:09 +0000)]
qla3xxx: ethernet: Silence static checker warning.
Silence the following warning:
"warn: returning -1 instead of -ENOMEM is sloppy".
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Junchang Wang [Mon, 5 Mar 2012 17:13:05 +0000 (17:13 +0000)]
8139too: Add 64bit statistics
Switch to use ndo_get_stats64 to get 64bit statistics.
Two sync entries are used (one for Rx and one for Tx).
Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Mar 2012 02:16:26 +0000 (21:16 -0500)]
Merge git://git./linux/kernel/git/davem/net
Conflicts:
drivers/net/vmxnet3/vmxnet3_drv.c
Small vmxnet3 conflict with header size bug fix in 'net'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 6 Mar 2012 00:23:12 +0000 (16:23 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"It contains three cherry-picked fixes from perf/core, which turned out
to be more urgent than we originally thought."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Handle kernels that don't support attr.exclude_{guest,host}
perf tools: Change perf_guest default back to false
perf record: No build id option fails
Linus Torvalds [Tue, 6 Mar 2012 00:10:44 +0000 (16:10 -0800)]
Merge tag 'usb-3.3-rc6' of git://git./linux/kernel/git/gregkh/usb
USB: revert a powerpc EHCI patch
There is just one patch in here, a revert of a powerpc EHCI driver
patch that was reported to cause problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'usb-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "powerpc/usb: fix issue of CPU halt when missing USB PHY clock"
Linus Torvalds [Tue, 6 Mar 2012 00:10:27 +0000 (16:10 -0800)]
Merge tag 'tty-3.3-rc6' of git://git./linux/kernel/git/gregkh/tty
tty: build fix for 3.3-rc6
This contains one build fix for the powerpc udbg driver that was reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'tty-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty/powerpc: early udbg consoles can't be modules
Linus Torvalds [Tue, 6 Mar 2012 00:01:25 +0000 (16:01 -0800)]
Merge tag 'md-3.3-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Three fixes for md in 3.3-rc: Two relate to the recently added drive
replacement. One fixes the problem where a read error in RAID10 would
sometimes be retried indefinitely."
* tag 'md-3.3-fixes' of git://neil.brown.name/md:
md/raid10: fix assembling of arrays with replacement devices.
md/raid10: fix handling of error on last working device in array.
md/raid1: fix buglet in md_raid1_contested.
Linus Torvalds [Mon, 5 Mar 2012 23:50:25 +0000 (15:50 -0800)]
Merge branch 'akpm' (Andrew's patch bomb)
Merge the emailed seties of 19 patches from Andrew Morton
* akpm:
rapidio/tsi721: fix queue wrapping bug in inbound doorbell handler
memcg: fix mapcount check in move charge code for anonymous page
mm: thp: fix BUG on mm->nr_ptes
alpha: fix 32/64-bit bug in futex support
memcg: fix GPF when cgroup removal races with last exit
debugobjects: Fix selftest for static warnings
floppy/scsi: fix setting of BIO flags
memcg: fix deadlock by inverting lrucare nesting
drivers/rtc/rtc-r9701.c: fix crash in r9701_remove()
c2port: class_create() returns an ERR_PTR
pps: class_create() returns an ERR_PTR, not NULL
hung_task: fix the broken rcu_lock_break() logic
vfork: kill PF_STARTING
coredump_wait: don't call complete_vfork_done()
vfork: make it killable
vfork: introduce complete_vfork_done()
aio: wake up waiters when freeing unused kiocbs
kprobes: return proper error code from register_kprobe()
kmsg_dump: don't run on non-error paths by default
Alexandre Bounine [Mon, 5 Mar 2012 22:59:21 +0000 (14:59 -0800)]
rapidio/tsi721: fix queue wrapping bug in inbound doorbell handler
Fix a bug that causes a kernel panic when the number of received doorbells
is larger than number of entries in the inbound doorbell queue (current
default value = 512).
Another possible indication for this bug is large number of spurious
doorbells reported by tsi721 driver after reaching the queue size maximum.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org> [3.2.x+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Mon, 5 Mar 2012 22:59:20 +0000 (14:59 -0800)]
memcg: fix mapcount check in move charge code for anonymous page
Currently the charge on shared anonyous pages is supposed not to moved in
task migration. To implement this, we need to check that mapcount > 1,
instread of > 2. So this patch fixes it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Mon, 5 Mar 2012 22:59:20 +0000 (14:59 -0800)]
mm: thp: fix BUG on mm->nr_ptes
Dave Jones reports a few Fedora users hitting the BUG_ON(mm->nr_ptes...)
in exit_mmap() recently.
Quoting Hugh's discovery and explanation of the SMP race condition:
"mm->nr_ptes had unusual locking: down_read mmap_sem plus
page_table_lock when incrementing, down_write mmap_sem (or mm_users
0) when decrementing; whereas THP is careful to increment and
decrement it under page_table_lock.
Now most of those paths in THP also hold mmap_sem for read or write
(with appropriate checks on mm_users), but two do not: when
split_huge_page() is called by hwpoison_user_mappings(), and when
called by add_to_swap().
It's conceivable that the latter case is responsible for the
exit_mmap() BUG_ON mm->nr_ptes that has been reported on Fedora."
The simplest way to fix it without having to alter the locking is to make
split_huge_page() a noop in nr_ptes terms, so by counting the preallocated
pagetables that exists for every mapped hugepage. It was an arbitrary
choice not to count them and either way is not wrong or right, because
they are not used but they're still allocated.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: <stable@vger.kernel.org> [3.0.x, 3.1.x, 3.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Mon, 5 Mar 2012 22:59:19 +0000 (14:59 -0800)]
alpha: fix 32/64-bit bug in futex support
Michael Cree said:
: : I have noticed some user space problems (pulseaudio crashes in pthread
: : code, glibc/nptl test suite failures, java compiler freezes on SMP alpha
: : systems) that arise when using a 2.6.39 or later kernel on Alpha.
: : Bisecting between 2.6.38 and 2.6.39 (using glibc/nptl test suite as
: : criterion for good/bad kernel) eventually leads to:
: :
: :
8d7718aa082aaf30a0b4989e1f04858952f941bc is the first bad commit
: : commit
8d7718aa082aaf30a0b4989e1f04858952f941bc
: : Author: Michel Lespinasse <walken@google.com>
: : Date: Thu Mar 10 18:50:58 2011 -0800
: :
: : futex: Sanitize futex ops argument types
: :
: : Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic
: : prototypes to use u32 types for the futex as this is the data type the
: : futex core code uses all over the place.
: :
: : Looking at the commit I see there is a change of the uaddr argument in
: : the Alpha architecture specific code for futexes from int to u32, but I
: : don't see why this should cause a problem.
Richard Henderson said:
: futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
: u32 oldval, u32 newval)
: ...
: : "r"(uaddr), "r"((long)oldval), "r"(newval)
:
:
: There is no 32-bit compare instruction. These are implemented by
: consistently extending the values to a 64-bit type. Since the
: load instruction sign-extends, we want to sign-extend the other
: quantity as well (despite the fact it's logically unsigned).
:
: So:
:
: - : "r"(uaddr), "r"((long)oldval), "r"(newval)
: + : "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
:
: should do the trick.
Michael said:
: This fixes the glibc test suite failures and the pulseaudio related
: crashes, but it does not fix the java compiiler lockups that I was (and
: are still) observing. That is some other problem.
Reported-by: Michael Cree <mcree@orcon.net.nz>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Mon, 5 Mar 2012 22:59:18 +0000 (14:59 -0800)]
memcg: fix GPF when cgroup removal races with last exit
When moving tasks from old memcg (with move_charge_at_immigrate on new
memcg), followed by removal of old memcg, hit General Protection Fault in
mem_cgroup_lru_del_list() (called from release_pages called from
free_pages_and_swap_cache from tlb_flush_mmu from tlb_finish_mmu from
exit_mmap from mmput from exit_mm from do_exit).
Somewhat reproducible, takes a few hours: the old struct mem_cgroup has
been freed and poisoned by SLAB_DEBUG, but mem_cgroup_lru_del_list() is
still trying to update its stats, and take page off lru before freeing.
A task, or a charge, or a page on lru: each secures a memcg against
removal. In this case, the last task has been moved out of the old memcg,
and it is exiting: anonymous pages are uncharged one by one from the
memcg, as they are zapped from its pagetables, so the charge gets down to
0; but the pages themselves are queued in an mmu_gather for freeing.
Most of those pages will be on lru (and force_empty is careful to
lru_add_drain_all, to add pages from pagevec to lru first), but not
necessarily all: perhaps some have been isolated for page reclaim, perhaps
some isolated for other reasons. So, force_empty may find no task, no
charge and no page on lru, and let the removal proceed.
There would still be no problem if these pages were immediately freed; but
typically (and the put_page_testzero protocol demands it) they have to be
added back to lru before they are found freeable, then removed from lru
and freed. We don't see the issue when adding, because the
mem_cgroup_iter() loops keep their own reference to the memcg being
scanned; but when it comes to mem_cgroup_lru_del_list().
I believe this was not an issue in v3.2: there, PageCgroupAcctLRU and
PageCgroupUsed flags were used (like a trick with mirrors) to deflect view
of pc->mem_cgroup to the stable root_mem_cgroup when neither set.
38c5d72f3ebe ("memcg: simplify LRU handling by new rule") mercifully
removed those convolutions, but left this General Protection Fault.
But it's surprisingly easy to restore the old behaviour: just check
PageCgroupUsed in mem_cgroup_lru_add_list() (which decides on which lruvec
to add), and reset pc to root_mem_cgroup if page is uncharged. A risky
change? just going back to how it worked before; testing, and an audit of
uses of pc->mem_cgroup, show no problem.
And there's a nice bonus: with mem_cgroup_lru_add_list() itself making
sure that an uncharged page goes to root lru, mem_cgroup_reset_owner() no
longer has any purpose, and we can safely revert
4e5f01c2b9b9 ("memcg:
clear pc->mem_cgroup if necessary").
Calling update_page_reclaim_stat() after add_page_to_lru_list() in swap.c
is not strictly necessary: the lru_lock there, with RCU before memcg
structures are freed, makes mem_cgroup_get_reclaim_stat_from_page safe
without that; but it seems cleaner to rely on one dependency less.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Boyd [Mon, 5 Mar 2012 22:59:17 +0000 (14:59 -0800)]
debugobjects: Fix selftest for static warnings
debugobjects is now printing a warning when a fixup for a NOTAVAILABLE
object is run. This causes the selftest to fail like:
ODEBUG: selftest warnings failed 4 != 5
We could just increase the number of warnings that the selftest is
expecting to see because that is actually what has changed. But, it turns
out that fixup_activate() was written with inverted logic and thus a fixup
for a static object returned 1 indicating the object had been fixed, and 0
otherwise. Fix the logic to be correct and update the counts to reflect
that nothing needed fixing for a static object.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muthu Kumar [Mon, 5 Mar 2012 22:59:16 +0000 (14:59 -0800)]
floppy/scsi: fix setting of BIO flags
Fix setting bio flags in drivers (sd_dif/floppy).
Signed-off-by: Muthukumar R <muthur@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Mon, 5 Mar 2012 22:59:16 +0000 (14:59 -0800)]
memcg: fix deadlock by inverting lrucare nesting
We have forgotten the rules of lock nesting: the irq-safe ones must be
taken inside the non-irq-safe ones, otherwise we are open to deadlock:
CPU0 CPU1
---- ----
lock(&(&pc->lock)->rlock);
local_irq_disable();
lock(&(&zone->lru_lock)->rlock);
lock(&(&pc->lock)->rlock);
<Interrupt>
lock(&(&zone->lru_lock)->rlock);
To check a different locking issue, I happened to add a spin_lock to
memcg's bit_spin_lock in lock_page_cgroup(), and lockdep very quickly
complained about __mem_cgroup_commit_charge_lrucare() (on CPU1 above).
So delete __mem_cgroup_commit_charge_lrucare(), passing a bool lrucare to
__mem_cgroup_commit_charge() instead, taking zone->lru_lock under
lock_page_cgroup() in the lrucare case.
The original was using spin_lock_irqsave, but we'd be in more trouble if
it were ever called at interrupt time: unconditional _irq is enough. And
ClearPageLRU before del from lru, SetPageLRU before add to lru: no strong
reason, but that is the ordering used consistently elsewhere.
Fixes
36b62ad539498d00c2d280a151a ("memcg: simplify corner case handling
of LRU").
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anatolij Gustschin [Mon, 5 Mar 2012 22:59:16 +0000 (14:59 -0800)]
drivers/rtc/rtc-r9701.c: fix crash in r9701_remove()
If probing the RTC didn't succeed due to failed RTC register access, the
RTC device will be unregistered. Then, when removing the module
r9701_remove() causes a kernel crash while trying to unregister a not
registered RTC device. Fix this by doing RTC register access test before
RTC device registration.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Mon, 5 Mar 2012 22:59:15 +0000 (14:59 -0800)]
c2port: class_create() returns an ERR_PTR
class_create() doesn't return a NULL, it only returns ERR_PTRs.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Mon, 5 Mar 2012 22:59:15 +0000 (14:59 -0800)]
pps: class_create() returns an ERR_PTR, not NULL
class_create() never returns NULLs only ERR_PTRs.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Mon, 5 Mar 2012 22:59:14 +0000 (14:59 -0800)]
hung_task: fix the broken rcu_lock_break() logic
check_hung_uninterruptible_tasks()->rcu_lock_break() introduced by
"softlockup: check all tasks in hung_task" commit
ce9dbe24 looks
absolutely wrong.
- rcu_lock_break() does put_task_struct(). If the task has exited
it is not safe to even read its ->state, nothing protects this
task_struct.
- The TASK_DEAD checks are wrong too. Contrary to the comment, we
can't use it to check if the task was unhashed. It can be unhashed
without TASK_DEAD, or it can be valid with TASK_DEAD.
For example, an autoreaping task can do release_task(current)
long before it sets TASK_DEAD in do_exit().
Or, a zombie task can have ->state == TASK_DEAD but release_task()
was not called, and in this case we must not break the loop.
Change this code to check pid_alive() instead, and do this before we drop
the reference to the task_struct.
Note: while_each_thread() under rcu_read_lock() is not really safe, it can
livelock. This will be fixed later, but fortunately in this case the
"max_count" logic saves us anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mandeep Singh Baines <msb@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Mon, 5 Mar 2012 22:59:14 +0000 (14:59 -0800)]
vfork: kill PF_STARTING
Previously it was (ab)used by utrace. Then it was wrongly used by the
scheduler code.
Currently it is not used, kill it before it finds the new erroneous user.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Mon, 5 Mar 2012 22:59:13 +0000 (14:59 -0800)]
coredump_wait: don't call complete_vfork_done()
Now that CLONE_VFORK is killable, coredump_wait() no longer needs
complete_vfork_done(). zap_threads() should find and kill all tasks with
the same ->mm, this includes our parent if ->vfork_done is set.
mm_release() becomes the only caller, unexport complete_vfork_done().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Mon, 5 Mar 2012 22:59:13 +0000 (14:59 -0800)]
vfork: make it killable
Make vfork() killable.
Change do_fork(CLONE_VFORK) to do wait_for_completion_killable(). If it
fails we do not return to the user-mode and never touch the memory shared
with our child.
However, in this case we should clear child->vfork_done before return, we
use task_lock() in do_fork()->wait_for_vfork_done() and
complete_vfork_done() to serialize with each other.
Note: now that we use task_lock() we don't really need completion, we
could turn task->vfork_done into "task_struct *wake_up_me" but this needs
some complications.
NOTE: this and the next patches do not affect in-kernel users of
CLONE_VFORK, kernel threads run with all signals ignored including
SIGKILL/SIGSTOP.
However this is obviously the user-visible change. Not only a fatal
signal can kill the vforking parent, a sub-thread can do execve or
exit_group() and kill the thread sleeping in vfork().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Mon, 5 Mar 2012 22:59:13 +0000 (14:59 -0800)]
vfork: introduce complete_vfork_done()
No functional changes.
Move the clear-and-complete-vfork_done code into the new trivial helper,
complete_vfork_done().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Moyer [Mon, 5 Mar 2012 22:59:12 +0000 (14:59 -0800)]
aio: wake up waiters when freeing unused kiocbs
Bart Van Assche reported a hung fio process when either hot-removing
storage or when interrupting the fio process itself. The (pruned) call
trace for the latter looks like so:
fio D
0000000000000001 0 6849 6848 0x00000004
ffff880092541b88 0000000000000046 ffff880000000000 ffff88012fa11dc0
ffff88012404be70 ffff880092541fd8 ffff880092541fd8 ffff880092541fd8
ffff880128b894d0 ffff88012404be70 ffff880092541b88 000000018106f24d
Call Trace:
schedule+0x3f/0x60
io_schedule+0x8f/0xd0
wait_for_all_aios+0xc0/0x100
exit_aio+0x55/0xc0
mmput+0x2d/0x110
exit_mm+0x10d/0x130
do_exit+0x671/0x860
do_group_exit+0x44/0xb0
get_signal_to_deliver+0x218/0x5a0
do_signal+0x65/0x700
do_notify_resume+0x65/0x80
int_signal+0x12/0x17
The problem lies with the allocation batching code. It will
opportunistically allocate kiocbs, and then trim back the list of iocbs
when there is not enough room in the completion ring to hold all of the
events.
In the case above, what happens is that the pruning back of events ends
up freeing up the last active request and the context is marked as dead,
so it is thus responsible for waking up waiters. Unfortunately, the
code does not check for this condition, so we end up with a hung task.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@kernel.org> [3.2.x only]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prashanth Nageshappa [Mon, 5 Mar 2012 22:59:12 +0000 (14:59 -0800)]
kprobes: return proper error code from register_kprobe()
register_kprobe() aborts if the address of the new request falls in a
prohibited area (such as ftrace pouch, __kprobes annotated functions,
non-kernel text addresses, jump label text). We however don't return the
right error on this abort, resulting in a silent failure - incorrect
adding/reporting of kprobes ('perf probe do_fork+18' or 'perf probe
mcount' for instance).
In V2 we are incorporating Masami Hiramatsu's feedback.
This patch fixes it by returning -EINVAL upon failure.
While we are here, rename the label used for exit to be more appropriate.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Prashanth K Nageshappa <prashanth@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Garrett [Mon, 5 Mar 2012 22:59:10 +0000 (14:59 -0800)]
kmsg_dump: don't run on non-error paths by default
Since commit
04c6862c055f ("kmsg_dump: add kmsg_dump() calls to the
reboot, halt, poweroff and emergency_restart paths"), kmsg_dump() gets
run on normal paths including poweroff and reboot.
This is less than ideal given pstore implementations that can only
represent single backtraces, since a reboot may overwrite a stored oops
before it's been picked up by userspace. In addition, some pstore
backends may have low performance and provide a significant delay in
reboot as a result.
This patch adds a printk.always_kmsg_dump kernel parameter (which can also
be changed from userspace). Without it, the code will only be run on
failure paths rather than on normal paths. The option can be enabled in
environments where there's a desire to attempt to audit whether or not a
reboot was cleanly requested or not.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Igor Maravic [Sun, 4 Mar 2012 23:01:25 +0000 (00:01 +0100)]
r8169: add byte queue limit support.
Nothing fancy:
- sent bytes count is notified in the start_xmit path right before
updating the owner bit in the hardware Tx descriptor (E. Dumazet)
- avoid useless tp->dev dereferencing in start_xmit (E. Dumazet)
Use of netdev_reset_queue is favored over proper accounting in
rtl8169_tx_clear_range since the latter would need more work for the
same result (nb: said accounting degenerates to nothing in xmit_frags).
Signed-off-by: Igor Maravic <igorm@etf.rs>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Junchang Wang [Sun, 4 Mar 2012 22:30:32 +0000 (23:30 +0100)]
r8169: add 64bit statistics.
Switch to use ndo_get_stats64 to get 64bit statistics.
Two sync entries are used (one for Rx and one for Tx).
Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
NeilBrown [Mon, 5 Mar 2012 06:48:12 +0000 (17:48 +1100)]
md/raid10: fix assembling of arrays with replacement devices.
commit
56a2559bb654a (md/raid10: recognise replacements ...)
changed 'run' to set ->replacement or ->rdev depending on the
'Replacement' status if the device, but it didn't remove the
old unconditional setting of 'rdev'. So it was largely ineffective.
So remove that now.
Signed-off-by: NeilBrown <neilb@suse.de>
Alan Cox [Mon, 5 Mar 2012 14:22:16 +0000 (14:22 +0000)]
drm, gma500: Fix Cedarview boot failures in 3.3-rc
Production GMA3600/3650 hardware turns out to be subtly different to the
development platforms. This combined with a minor driver bug is causing
the kernel to hang on these platforms.
This patch does the following
- turn down a couple of messages that were meant to be debug and are
causing much confusion
- ensure the hotplug interrupt is disabled on Cedartrail systems.
- fix a bug where gtt roll mode called psbfb_sync, which tries to sync
the 2D engine. On other devices it is harmless as the 2D engine is
present but not in use when in gtt roll mode, on Cedartrail it causes
a hang
Without these changes 3.3-rc hangs on boot on Cedartrail based systems.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 5 Mar 2012 22:30:54 +0000 (14:30 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) TCP SACK processing can calculate an incorrect reordering value in
some cases, fix from Neal Cardwell.
2) tcp_mark_head_lost() can split SKBs in situations where it should
not, violating send queue invariants expected by other pieces of
code and thus resulting (eventually) in corrupted retransmit state
counters. Also from Neal Cardwell.
3) qla3xxx erroneously calls spin_lock_irqrestore() with constant
hw_flags of zero. Fix from Santosh Nayak.
4) Fix NULL deref in rt2x00, from Gabor Juhos.
5) pch_gbe passes address of wrong typed object to pch_gbe_validate_option
thus corrupting part of the value. From Dan Carpenter.
6) We must check the return value of nlmsg_parse() before trying to use
the results. From Eric Dumazet.
7) Bridging code fails to check return value of ipv6_dev_get_saddr()
thus potentially leaving uninitialized garbage in the outgoing ipv6
header. From Ulrich Weber.
8) Due to rounding and a reversed operation on jiffies, bridge message
ages can go backwards instead of forwards, thus breaking STP. Fixes
from Joakim Tjernlund.
9) r8169 modifies Config* registers without properly holding the
Config9346 lock, resulting in corrupted IP fragments on some chips.
Fix from Francois Romieu.
10) NET_PACKET_ENGINE default wan't set properly during the network
driver mega-move. Fix from Stephen Hemminger.
11) vmxnet3 uses TCP header size where it actually should use the UDP
header size, fix from Shreyas Bhatewara.
12) Netfilter bridge module autoload is busted in the compat case, fix
from Florian Westphal.
13) Wireless Key removal was not setting multicast bits correctly thus
accidently killing the unicast key 0 and thus all traffic stops.
Fix from Johannes Berg.
14) Fix endless retries of A-MPDU transmissions in brcm80211 driver.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
qla3xxx: ethernet: Fix bogus interrupt state flag.
bridge: check return value of ipv6_dev_get_saddr()
rtnetlink: fix rtnl_calcit() and rtnl_dump_ifinfo()
bridge: message age needs to increase, not decrease.
bridge: Adjust min age inc for HZ > 256
tcp: don't fragment SACKed skbs in tcp_mark_head_lost()
r8169: corrupted IP fragments fix for large mtu.
packetengines: fix config default
vmxnet3: Fix transport header size
enic: fix an endian bug in enic_probe()
pch_gbe: memory corruption calling pch_gbe_validate_option()
tg3: Fix tg3_get_stats64 for 5700 / 5701 devs
tcp: fix false reordering signal in tcp_shifted_skb
tcp: fix comment for tp->highest_sack
netfilter: bridge: fix module autoload in compat case
brcm80211: smac: only print block-ack timeout message at trace level
brcm80211: smac: fix endless retry of A-MPDU transmissions
mac80211: Fix a warning on changing to monitor mode from STA
mac80211: zero initialize count field in ieee80211_tx_rate
iwlwifi: fix key removal
...
Linus Torvalds [Mon, 5 Mar 2012 22:30:12 +0000 (14:30 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci
Pull PCI fixes from Jesse Barnes:
"A couple of fixes for booting specific machines, and one for a minor
memory leak on pre-_CRS platforms."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
x86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS version
x86/PCI: use host bridge _CRS info on MSI MS-7253
PCI: fix memleak when ACPI _CRS is not used.
Linus Torvalds [Mon, 5 Mar 2012 22:28:36 +0000 (14:28 -0800)]
Merge branch 'for-3.3-fixes' of git://git./linux/kernel/git/tj/percpu
Pull per-cpu patches from Tejun Heo:
"This pull request contains four patches. One replaces manual clearing
with bitmap_clear(), two fix generic definition of __this_cpu ops so
that they don't choose unnecessarily strict arch version. One makes
_this_cpu definition use raw_local_irq_*() so that it doesn't end up
wrecking irq on/off state tracking when used from inside lockdep.
Of the four patches, the raw_local_irq_*() update is the most
important, so please feel free to cherry pick only that one patch and
ignore the rest if you want to - commit
e920d5971d 'percpu: use
raw_local_irq_* in _this_cpu op'."
* 'for-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: fix __this_cpu_{sub,inc,dec}_return() definition
percpu: use raw_local_irq_* in _this_cpu op
percpu: fix generic definition of __this_cpu_add_and_return()
percpu: use bitmap_clear
Linus Torvalds [Mon, 5 Mar 2012 22:27:34 +0000 (14:27 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"What's in there: a number of MIPS fixes and touchups. The most
important change in this pull request is Kautuk Consul's port of
changes to do_page_fault which fix a hang that affects some
configurations. Still not quite ready for a release, there are
problems with 64-bit platforms."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: traps.c: Fix typo
MIPS: PowerTV: Fix defconfigs for coverage builds
MIPS: Netlogic: Fix defconfigs for coverage builds
MIPS: ATH79: Avoid a kernel bug on AR913X
MIPS: PCI: use list_for_each_entry() for bus->devices traversal
MIPS: fault.c: Port OOM changes to do_page_fault
MIPS: vmlinux.lds.S: remove duplicate _sdata symbol
MIPS: Alchemy: Increase minimum timeout for 32kHz timer.
MIPS: txx9 7segled fix struct device has no member
MIPS: Alchemy: Update Au1300 inlined GPIO macros
MIPS: Remove temporary kludge from <asm/page.h>
MIPS: BMIPS: smp-bmips.c does not need to include version.h
Al Viro [Mon, 5 Mar 2012 06:40:29 +0000 (06:40 +0000)]
flush_tlb_range() needs ->page_table_lock when ->mmap_sem is not held
All other callers already hold either ->mmap_sem (exclusive) or
->page_table_lock. And we need it because some page table flushing
instanced do work explicitly with ge tables.
See e.g. arch/powerpc/mm/tlb_hash32.c, flush_tlb_range() and
flush_range() in there. The same goes for uml, with a lot more
extensive playing with page tables.
Almost all callers are actually fine - flush_tlb_range() may have no
need to bother playing with page tables, but it can do so safely; again,
this caller is the sole exception - everything else either has exclusive
->mmap_sem on the mm in question, or mm->page_table_lock is held.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Mon, 5 Mar 2012 06:39:47 +0000 (06:39 +0000)]
VM_GROWS{UP,DOWN} shouldn't be set on shmem VMAs
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Mon, 5 Mar 2012 06:38:42 +0000 (06:38 +0000)]
aout: move setup_arg_pages() prior to reading/mapping the binary
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Santosh Nayak [Fri, 2 Mar 2012 05:09:05 +0000 (05:09 +0000)]
qla3xxx: ethernet: Fix bogus interrupt state flag.
In 'ql_adapter_initialize'
the first call for 'spin_unlock_irqrestore()' is with hw_flags = 0,
which is as good as 'spin_unlock_irq()' (unconditional interrupt
enabling). If this is intended, then for better performance
'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()'
and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq()
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ulrich Weber [Mon, 5 Mar 2012 04:52:44 +0000 (04:52 +0000)]
bridge: check return value of ipv6_dev_get_saddr()
otherwise source IPv6 address of ICMPV6_MGM_QUERY packet
might be random junk if IPv6 is disabled on interface or
link-local address is not yet ready (DAD).
Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 5 Mar 2012 05:01:14 +0000 (05:01 +0000)]
mlx4_en: remove sparse errors
Fix new sparse errors introduced in commit
6221217199 (mlx4_en: dont
change mac_header on xmit)
Reported-by: Or Gerlitz <or.gerlitz@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Mar 2012 21:39:02 +0000 (16:39 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next
Eric Dumazet [Mon, 5 Mar 2012 04:50:09 +0000 (04:50 +0000)]
net: export netdev_stats_to_stats64
Some drivers use internal netdev stats member to store part of their
stats, yet advertize ndo_get_stats64() to implement some 64bit fields.
Allow them to use netdev_stats_to_stats64() helper to make the copy of
netdev stats before they compute their 64bit counters.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Mon, 5 Mar 2012 20:05:54 +0000 (15:05 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem
Linus Torvalds [Mon, 5 Mar 2012 16:51:10 +0000 (08:51 -0800)]
Merge tag 'mmc-fixes-for-3.3' of git://git./linux/kernel/git/cjb/mmc
MMC fixes from Chris Ball for 3.3:
- atmel-mci: oops fix against regression introduced in 3.2
- core: power saving regression fix against 3.3-rc1
- core: suspend/resume fix for UHS-I cards
- esdhc-imx: MMC card regression fix against 3.0
- mmci: oops fix for ARM systems with large (64k) pages
- MAINTAINERS update for atmel-mci.
* tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: core: Fixup suspend/resume issues for UHS-I cards
mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size
mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5
mmc: core: fix regression: set default clock gating delay to 0
MAINTAINERS: hand over atmel-mci (sd/mmc interface)
mmc: atmel-mci: don't use dma features when using DMA with no chan available
Linus Torvalds [Mon, 5 Mar 2012 16:48:24 +0000 (08:48 -0800)]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/jikos/hid
Pull from Jiri Kosina:
"Please pull to receive updates for HID layer. Nikolai's patch is
rather important and should still go in for 3.3, as it's a regression
fix for commit
b4b583d."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hid-input: allow array fields out of range
HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard
Nikolai Kondrashov [Fri, 2 Mar 2012 20:13:58 +0000 (22:13 +0200)]
HID: hid-input: allow array fields out of range
Allow array field values out of range as per HID 1.11 specification,
section 6.2.25:
Rather than returning a single bit for each button in the group, an
array returns an index in each field that corresponds to the pressed
button (like keyboard scan codes). An out-of range value in and array
field is considered no controls asserted.
Apparently, "and" above is a typo and should be "an".
This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never
released.
The relevant part of Waltop tablet report descriptors is this:
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x15, 0x01, /* Logical Minimum (1), */
0x25, 0x03, /* Logical Maximum (3), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x80, /* Input, */
This is a regression fix for commit
b4b583d ("HID: be more strict when
ignoring out-of-range fields").
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Ingo Molnar [Mon, 5 Mar 2012 08:05:44 +0000 (09:05 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Cherry picked fixes from perf/core, together with the kernel fix (
1018faa),
the sampling tools (top, record) are back working on AMD systems.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Eric Dumazet [Sun, 4 Mar 2012 12:32:10 +0000 (12:32 +0000)]
rtnetlink: fix rtnl_calcit() and rtnl_dump_ifinfo()
nlmsg_parse() might return an error, so test its return value before
potential random memory accesses.
Errors introduced in commit
115c9b81928 (rtnetlink: Fix problem with
buffer allocation)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Mar 2012 02:59:39 +0000 (21:59 -0500)]
Merge branch 'master' of git://gitorious.org/linux-can/linux-can-next
Joakim Tjernlund [Thu, 1 Mar 2012 08:12:19 +0000 (08:12 +0000)]
bridge: message age needs to increase, not decrease.
commit bridge: send proper message_age in config BPDU
added this gem:
bpdu.message_age = (jiffies - root->designated_age)
p->designated_age = jiffies + bpdu->message_age;
Notice how bpdu->message_age is negated when reassigned to
bpdu.message_age. This causes message age to decrease breaking the
STP protocol.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Tjernlund [Thu, 1 Mar 2012 08:12:18 +0000 (08:12 +0000)]
bridge: Adjust min age inc for HZ > 256
min age increment needs to round up its min age tick for all
HZ values to guarantee message age is increasing.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shreyas Bhatewara [Tue, 28 Feb 2012 22:08:39 +0000 (22:08 +0000)]
vmxnet3: Fix log messages and corrects some typos
Fix log messages and corrects some typos
Change logging of failure to enable MSI/MSI-X to display device's PCI
address instead of eth%d. Rectify a typo.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Mon, 27 Feb 2012 09:44:48 +0000 (09:44 +0000)]
tg3: Recode PCI MRRS adjustment as a PCI quirk
This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Gortmaker [Mon, 27 Feb 2012 02:36:29 +0000 (02:36 +0000)]
ucc_geth: separate out rx/tx ring alloc and free operations
Factor out the the existing allocation and free operations
so that they can be used individually.
This is to improve code readability, and also to prepare for
possible future changes like better error recovery and more
dynamic configuration (e.g on-the-fly resizing of the rings).
This change represents a straight up relocation of the existing
code into separate routines without changing any of the contained
code itself. Local variables are relocated as necessary.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Mackerras [Sun, 4 Mar 2012 12:56:55 +0000 (12:56 +0000)]
ppp: Replace uses of <linux/if_ppp.h> with <linux/ppp-ioctl.h>
Since all that include/linux/if_ppp.h does is #include <linux/ppp-ioctl.h>,
this replaces the occurrences of #include <linux/if_ppp.h> with
#include <linux/ppp-ioctl.h>.
It also corrects an error in Documentation/networking/l2tp.txt, where
it referenced include/linux/if_ppp.h as the source of some definitions
that are actually now defined in include/linux/if_pppol2tp.h.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Mackerras [Sun, 4 Mar 2012 12:56:04 +0000 (12:56 +0000)]
ppp: Move ioctl definitions from if_ppp.h to new ppp-ioctl.h
This moves the definitions of the ioctls, constants and structures
relating to the ppp_generic interface to userspace out from if_ppp.h
to a new file, ppp-ioctl.h. The new file has my copyright since I
designed and implemented the ppp_generic interface in the late 1990s.
None of the contents of this file comes from the original if_ppp.h
published by Carnegie Mellon University.
Of the remainder of if_ppp.h, only the PPP_MTU definition was being
used, and this replaces the uses of it with PPP_MRU (which is identical).
Therefore, this replaces the entire file with the single line
#include <linux/ppp-ioctl.h>
which clearly doesn't contain any CMU code. Thus I have removed the
CMU copyright notice with its problematic advertising clause, and in
fact since it's only one trivial line I have not added any other
copyright notice.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Mackerras [Sun, 4 Mar 2012 12:54:54 +0000 (12:54 +0000)]
ppp: Change copyright notices from ANU to me
This changes the copyright notices on the PPP code that I developed
in the late 1990s from being copyright The Australian National
University to copyright Paul Mackerras. I can do this as I have an
acknowledgement in writing from the Head of the Computer Science
Department at ANU (where I worked then) that ANU does not claim any
intellectual property in this code.
While I'm at it, change the copyright notice from BSD-style to
GNU GPL like the rest of the kernel.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 4 Mar 2012 14:48:15 +0000 (14:48 +0000)]
tg3: Fix poor tx performance on 57766 after MTU change
GRC reset causes the read DMA engine to go into a mode that breaks up
requests into 256 bytes. A PHY reset is required to bring it back to
the normal mode.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 4 Mar 2012 14:48:14 +0000 (14:48 +0000)]
tg3: Add memory barriers to sync BD data
for weak memory model architectures to ensure that the chip will DMA
valid BD data.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 4 Mar 2012 14:48:13 +0000 (14:48 +0000)]
tg3: Fix jumbo loopback test on 5719
Loopback on 9K packet fails because the chip has a DMA limit of 4K. The
loopback test logic uses a single BD for simplicity. Fix it by reducing
the jumbo packet size to the DMA limit.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 5 Mar 2012 01:10:06 +0000 (17:10 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6
MFD fixes from Samuel Ortiz:
"This is the pull request for the MFD fixes for 3.3. We have a few
NULL pointer dereferences fixes, an ACPI conflict check fix, and a
couple of wm8994 fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
mfd: Correct readability of WM8994 DC servo 4E register
mfd: Initialize tps65912 irq platform data properly
mfd: Fix ACPI conflict check
mfd: Fix ab8500 error path bug
mfd: Test for jack detection when deciding if wm8994 should suspend
mfd: Initialize tps65910 irq platform data properly
mfd: Fix possible s5m null pointer dereference
mfd: wm8350 variable dereferenced before check
Linus Torvalds [Sun, 4 Mar 2012 23:51:42 +0000 (15:51 -0800)]
vfs: move dentry_cmp from <linux/dcache.h> to fs/dcache.c
It's only used inside fs/dcache.c, and we're going to play games with it
for the word-at-a-time patches. This time we really don't even want to
export it, because it really is an internal function to fs/dcache.c, and
has been since it was introduced.
Having it in that extremely hot header file (it's included in pretty
much everything, thanks to <linux/fs.h>) is a disaster for testing
different versions, and is utterly pointless.
We really should have some kind of header file diet thing, where we
figure out which parts of header files are really better off private and
only result in more expensive compiles.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Tue, 28 Feb 2012 20:41:12 +0000 (00:41 +0400)]
percpu: fix __this_cpu_{sub,inc,dec}_return() definition
This patch adds missed "__" prefixes, otherwise these functions
works as irq/preemption safe.
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Ulf Hansson [Thu, 1 Mar 2012 12:18:05 +0000 (13:18 +0100)]
mmc: core: Fixup suspend/resume issues for UHS-I cards
Even if cards supports 1.8V I/O voltage those should anyway be
initialized at 3.3V I/O according to (e)MMC, SD and SDIO specs.
Some eMMC and embedded SDIO devices are able to be initialized
at 1.8V as well, but it is better to be safe.
Do note that initialization in this context means that the card
has been completely powered off, otherwise the card will remain
at the last I/O voltage level that were negotitiated.
Due to the above being taken care of the suspend/resume issues
for UHS-I SD-cards has been fixed.
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Will Deacon [Fri, 24 Feb 2012 11:25:21 +0000 (11:25 +0000)]
mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size
On a system with large pages (64k in my case), the following BUG is
triggered in MMC core:
[ 2.338023] BUG: failure at drivers/mmc/core/core.c:221/mmc_start_request()!
[ 2.338102] Kernel panic - not syncing: BUG!
[ 2.338155] Call trace:
[ 2.338228] [<
ffffffc00008635c>] dump_backtrace+0x0/0x120
[ 2.338317] [<
ffffffc0003365ec>] dump_stack+0x14/0x1c
[ 2.338403] [<
ffffffc000336990>] panic+0xbc/0x1f0
[ 2.338498] [<
ffffffc00027a494>] mmc_start_request+0x154/0x184
[ 2.338600] [<
ffffffc00027abdc>] mmc_start_req+0x110/0x140
[ 2.338701] [<
ffffffc00028604c>] mmc_blk_issue_rw_rq+0x7c/0x39c
[ 2.338804] [<
ffffffc00028652c>] mmc_blk_issue_rq+0x1c0/0x468
[ 2.338905] [<
ffffffc000287564>] mmc_queue_thread+0x68/0x118
[ 2.338995] [<
ffffffc0000bc308>] kthread+0x84/0x8c
This is because of a 64k request with a max_req_size of 64k-1 bytes.
The following patch fixes the problem by limiting the max_blk_count
such that max_blk_count * max_blk_size == max_req_size. I couldn't
pursuade the compiler to emit a shift instead of a div without encoding
the shift explicitly.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Sascha Hauer [Fri, 17 Feb 2012 10:51:49 +0000 (11:51 +0100)]
mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5
On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the
SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION
command. This works for SD cards. However, with MMC cards
the MMC_SET_BLOCK_COUNT command is used instead, but this
needs the same handling. Fix MMC cards by testing for the
MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53
board with a Transcend MMC+ card and eMMC.
The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this
is a regression for these boards introduced in 3.0; it should
go to 3.0/3.1/3.2-stable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Guennadi Liakhovetski [Thu, 23 Feb 2012 10:22:29 +0000 (11:22 +0100)]
mmc: core: fix regression: set default clock gating delay to 0
A recent commit "mmc: core: Use delayed work in clock gating framework"
(
597dd9d79cfbbb1) introduced a default 200ms delay before clock gating
actually takes place. This means that every time an MMC interface
becomes idle it first stays on for 200ms before gating its clock. This
leads to increased power consumption and is therefore a clear regression.
This patch restores the original behaviour by setting the default delay
to 0. Users prioritising throughput over power efficiency can still
modify the delay via sysfs.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
Nicolas Ferre [Fri, 17 Feb 2012 14:40:18 +0000 (15:40 +0100)]
MAINTAINERS: hand over atmel-mci (sd/mmc interface)
Modify MAINTAINERS entry for Atmel SD/MMC drivers.
I hand the atmel-mci and at91_mci drivers over to Ludovic.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Linus Torvalds [Sun, 4 Mar 2012 01:08:09 +0000 (17:08 -0800)]
Linux 3.3-rc6
Linus Torvalds [Sun, 4 Mar 2012 00:42:30 +0000 (16:42 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6
SCSI fixes from James Bottomley:
"There's just a single fix in here: the osd max device number fix."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
Linus Torvalds [Sun, 4 Mar 2012 00:33:51 +0000 (16:33 -0800)]
Merge tag 'parisc-fixes' of git://git./linux/kernel/git/jejb/parisc-2.6
PARISC fixes from James Bottomley:
"This is a set of build fixes to get the cross compiled architecture
testbeds building again"
* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
[PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.
[PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h
[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
David S. Miller [Sat, 3 Mar 2012 20:04:45 +0000 (15:04 -0500)]
mdio.h: Include linux/types.h
Fixes:
/home/davem/src/GIT/net-next/usr/include/linux/mdio.h:271: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Fri, 2 Mar 2012 21:36:51 +0000 (21:36 +0000)]
tcp: don't fragment SACKed skbs in tcp_mark_head_lost()
In tcp_mark_head_lost() we should not attempt to fragment a SACKed skb
to mark the first portion as lost. This is for two primary reasons:
(1) tcp_shifted_skb() coalesces adjacent regions of SACKed skbs. When
doing this, it preserves the sum of their packet counts in order to
reflect the real-world dynamics on the wire. But given that skbs can
have remainders that do not align to MSS boundaries, this packet count
preservation means that for SACKed skbs there is not necessarily a
direct linear relationship between tcp_skb_pcount(skb) and
skb->len. Thus tcp_mark_head_lost()'s previous attempts to fragment
off and mark as lost a prefix of length (packets - oldcnt)*mss from
SACKed skbs were leading to occasional failures of the WARN_ON(len >
skb->len) in tcp_fragment() (which used to be a BUG_ON(); see the
recent "crash in tcp_fragment" thread on netdev).
(2) there is no real point in fragmenting off part of a SACKed skb and
calling tcp_skb_mark_lost() on it, since tcp_skb_mark_lost() is a NOP
for SACKed skbs.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 3 Mar 2012 19:57:11 +0000 (14:57 -0500)]
Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next
Linus Torvalds [Sat, 3 Mar 2012 17:32:31 +0000 (09:32 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
Linus Torvalds [Sat, 3 Mar 2012 17:31:49 +0000 (09:31 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull from Herbert Xu:
"This push fixes a bug in mv_cesa that causes all hash operations
that supply data on a final operation to fail."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: mv_cesa - fix final callback not ignoring input data
Stephane Grosjean [Fri, 2 Mar 2012 15:13:06 +0000 (16:13 +0100)]
can: usb: PEAK-System Technik PCAN-USB Pro specific part
This patch adds the specific part which handles the PCAN-USB Pro adapter
from PEAK-System Technik (http://www.peak-system.com). The PCAN-USB Pro
adapter is a dual-channel USB 2.0 adapter compliant with CAN specifications
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Fri, 2 Mar 2012 15:13:05 +0000 (16:13 +0100)]
can: usb: PEAK-System Technik PCAN-USB specific part
This patch adds the specific part which handles the PCAN-USB adapter from
PEAK-System Technik (http://www.peak-system.com). The PCAN-USB adapter is
a sja1000 based, mono-channel USB 1.1 adapter compliant with CAN
specifications 2.0A (11-bit ID) and 2.0B (29-bit ID).
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Fri, 2 Mar 2012 15:13:04 +0000 (16:13 +0100)]
can: usb: PEAK-System Technik USB adapters driver core
This patch adds the core of the peak_usb driver which handles PEAK-System
Technik PCAN USB adapters. It defines the parts which are common to the
PCAN-USB adapters: can network interfaces management, network-to/from-usb
data path interface, timestamps management...
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Fri, 2 Mar 2012 15:21:20 +0000 (16:21 +0100)]
can: sja1000: add support for PEAK-System PCMCIA card
This patch adds support to the PCAN-PC Card PCMCIA card from
PEAK-System Technik (www.peak-system.com). This card is a CAN interface
for the PC Card slot. It is available as a single or dual-channel version.
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Fri, 2 Mar 2012 15:21:19 +0000 (16:21 +0100)]
can: peak_pci: add support of some new PEAK-System PCI cards
This patch adds the support of some new PEAK-System PCI cards in the CAN
network sub-system. These are:
PCAN-PCIeC (PCI-ExpressCard)
PCAN-mminiPCI (mini-PCI)
PCAN-PCI (PCI next-gen)
This patch also adds the control of the blinking leds of the PCAN-PCIeC.
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Danny Kukawka [Wed, 15 Feb 2012 17:55:01 +0000 (18:55 +0100)]
can: cc770: linux/can/dev.h included twice
drivers/net/can/cc770/cc770.c included 'linux/can/dev.h' twice,
remove the duplicate.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Samuel Jero [Mon, 27 Feb 2012 01:22:02 +0000 (18:22 -0700)]
dccp: fix bug in sequence number validation during connection setup
This fixes a bug in the sequence number validation during the initial handshake.
The code did not treat the initial sequence numbers ISS and ISR as read-only and
did not keep state for GSR and GSS as required by the specification. This causes
problems with retransmissions during the initial handshake, causing the
budding connection to be reset.
This patch now treats ISS/ISR as read-only and tracks GSS/GSR as required.
Signed-off-by: Samuel Jero <sj323707@ohio.edu>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Gerrit Renker [Mon, 27 Feb 2012 19:29:44 +0000 (12:29 -0700)]
dccp ccid-3: replace incorrect BUG_ON
This replaces an unjustified BUG_ON(), which could get triggered under normal
conditions: X_calc can be 0 when p > 0. X would in this case be set to the
minimum, s/t_mbi. Its replacement avoids t_ipi = 0 (unbounded sending rate).
Thanks to Jordi, Victor and Xavier who reported this.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.uk>
Arnaldo Carvalho de Melo [Tue, 14 Feb 2012 16:05:30 +0000 (14:05 -0200)]
perf tools: Handle kernels that don't support attr.exclude_{guest,host}
Just fall back to resetting those fields, if set, warning the user that
that feature is not available.
If guest samples appear they will just be discarded because no struct
machine will be found and thus the event will be accounted as not
handled and dropped, see
0c09571.
Reported-by: Namhyung Kim <namhyung@gmail.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vuwxig36mzprl5n7nzvnxxsh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joerg Roedel [Fri, 10 Feb 2012 17:05:05 +0000 (18:05 +0100)]
perf tools: Change perf_guest default back to false
Setting perf_guest to true by default makes no sense because the perf
subcommands can not setup guest symbol information and thus not process
and guest samples. The only exception is perf-kvm which changes the
perf_guest value on its own. So change the default for perf_guest back
to false.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328893505-4115-3-git-send-email-joerg.roedel@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 6 Feb 2012 22:27:52 +0000 (15:27 -0700)]
perf record: No build id option fails
A recent refactoring of perf-record introduced the following:
perf record -a -B
Couldn't generating buildids. Use --no-buildid to profile anyway.
sleep: Terminated
I believe the triple negative was meant to be only a double negative.
:-) While I'm there, fixed the grammar on the error message.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 3 Mar 2012 03:40:57 +0000 (19:40 -0800)]
vfs: export full_name_hash() function to modules
Commit
5707c87f "vfs: uninline full_name_hash()" broke the modular
build, because it needs exporting now that it isn't inlined any more.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Fastabend [Fri, 10 Feb 2012 03:19:41 +0000 (03:19 +0000)]
net: dcb: getnumtcs()/setnumtcs() should return an int
{g|s}etnumtcs() today returns a u8 that is only used by the DCB code
to verify no error occurred. Today the driver implementations return
negative error codes which end up being non-zero so the logic works
out but triggers some sparse warnings.
To fix the sparse warnings convert the return value to an int.
CC: Eilon Greenstein <eilong@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
John Fastabend [Fri, 10 Feb 2012 03:19:35 +0000 (03:19 +0000)]
ixgbe: dcb: check setup_tc return codes
dcb netlink code calls setup_tc to init hardware traffic classes
to use for DCB. At some call sites the return values are not
checked for errors and in one case may return -EINVAL back to
the net/dcbnl.c caller which is expecting a u8.
This fixes some smatch hits and although failures are never
seen in practive its best to check return codes.
Reported-by: Dan Carenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Ben Greear [Fri, 17 Feb 2012 13:44:28 +0000 (13:44 +0000)]
e100: Show short v/s long rx length errors in ethtool stats.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Ben Greear [Fri, 17 Feb 2012 13:44:23 +0000 (13:44 +0000)]
e100: Fix rx-over-length statistics.
The old code would += the total errors every time
stats were gathered. Instead, keep a count of short-pkt
and long-pkt counters and then simply add them together
for the rx-over-length stat.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
françois romieu [Fri, 2 Mar 2012 04:43:14 +0000 (04:43 +0000)]
r8169: corrupted IP fragments fix for large mtu.
Noticed with the 8168d (-vb-gr, aka RTL_GIGA_MAC_VER_26).
ConfigX registers should only be written while the Config9346 lock
is held.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Sat, 3 Mar 2012 00:08:54 +0000 (16:08 -0800)]
Revert "powerpc/usb: fix issue of CPU halt when missing USB PHY clock"
This reverts commit
529febeee680dc22416fca033151a5e8bc620447.
To quote Dirk:
This commit introduces a check for the USB PHY clock.
Problem is that CTRL_PHY_CLK_VALID bit seems not to be present
on all Freescale ehci implementations, at least P1022 does not
have it. So this check always fails and the driver never gets
loaded.
So we need to revert this patch.
Reported-by: Dirk Eibach <Eibach@gdsys.de>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
stephen hemminger [Fri, 2 Mar 2012 13:38:56 +0000 (13:38 +0000)]
packetengines: fix config default
As part of the big network driver reorg, each vendor directory defaults to
yes, so that older config's can migrate correctly. Looks like this one
got missed.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Mar 2012 23:21:48 +0000 (15:21 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
hhwmon fixes for 3.3-rc6 from Guenter Roeck:
These patches are necessary for correct operation and management of
F75387.
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (f75375s) Catch some attempts to write to r/o registers
hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable
hwmon: (f75375s) Make pwm*_mode writable for the F75387
hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387