OSDN Git Service
Alistair Francis [Sun, 1 Aug 2021 00:47:00 +0000 (10:47 +1000)]
drm/panel: Add support for E Ink VB3300-KCA
Add support for the 10.3" E Ink panel described at:
https://www.eink.com/product.html?type=productdetail&id=7
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210801004701.831-1-alistair@alistair23.me
Cai Huoqing [Tue, 27 Jul 2021 05:21:07 +0000 (13:21 +0800)]
drm/pl111: Remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727052107.659-1-caihuoqing@baidu.com
Douglas Anderson [Fri, 30 Jul 2021 15:46:05 +0000 (08:46 -0700)]
drm/panel: atna33xc20: Introduce the Samsung ATNA33XC20 panel
The Samsung ATNA33XC20 panel is an AMOLED eDP panel that has backlight
control over the DP AUX channel.
This panel is _almost_ able to be controlled in a "simple" way (and it
originally was implemented in panel-simple.c), but it's really
impossible to get the backlight semantics right there without adding
wacky special-case code to panel-simple. Let's give up and clone the
parts of panel-simple that we need and implement the power sequence
that this panel needs.
NOTE: we'll still leave the devicetree bindings alone. Even though the
power-sequencing is non-standard the bindings are still "simple".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.6.I3a2900080f8749d2bb4baf49ca902db4b0e1df7d@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:04 +0000 (08:46 -0700)]
Revert "drm/panel-simple: Support for delays between GPIO & regulator"
This reverts commit
18a1488bf1e13fc3fc96d7948466b2166067c6c8.
Those delays were added to support the Samsung ATNA33XC20
panel. However, we've moving that to its own panel driver and out of
panel-simple. That means we don't need the ability to specify this
delay.
NOTE: it's unlikely we want to keep this delay "just in case" some
other panel needs it. The enable-gpio and the power supply are really
supposed to be different ways to specify the same thing: the main
enable of the panel. Supporting a delay between them doesn't really
make sense.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.5.Ie44e3e5b7a926392541d575ca84c56931596513f@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:03 +0000 (08:46 -0700)]
Revert "drm/panel-simple: Add Samsung ATNA33XC20"
This reverts commit
4bfe6c8f7c23b01719671b69fd29b87a35ccd9d6.
This panel's power sequencing really can't be handled properly by
panel-simple because of the special sequencing needed for the EL_ON3
GPIO. The only way it was sorta working in the past was by trying to
jam that signal into the "enable-gpio", but that really wasn't a good
fit. We'll add a custom panel driver for this panel to do it right.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.4.Id9f076ec5f35633f8ce931051af268a04c45c075@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:02 +0000 (08:46 -0700)]
drm/bridge: ti-sn65dsi86: Add some 100 us delays
The manual has always said that we need 100 us delays in a few
places. Though it hasn't seemed to be a big deal to skip these, let's
add them in case it makes something happier.
NOTE: this fixes no known issues but it seems good to make it right.
Fixes:
a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.3.I842d483139531aa4651da8338512fdf0171ff23c@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:01 +0000 (08:46 -0700)]
drm/bridge: ti-sn65dsi86: Fix power off sequence
When testing with a panel that's apparently a little more persnickety
about the correct power sequence (specifically Samsung ATNA33XC20), we
found that the ti-sn65dsi86 was doing things just slightly wrong.
Looking closely at the ti-sn65dsi86's datasheet, the power off
sequence is supposed to be:
1. Clear VSTREAM_ENABLE bit
2. Stop DSI stream from GPU. DSI lanes must be placed in LP11 state.
3. Program the ML_TX_MODE to 0x0 (OFF)
4. Program the DP_NUM_LANES register to 0x0
5. Clear the DP_PLL_EN bit.
6. Deassert the EN pin.
7. Remove power from supply pins
Since we were doing the whole sequence in the "disable", I believe
that step #2 (stopping the DSI stream from the GPU) wasn't
happening. We also weren't setting DP_NUM_LANES to 0.
Let's fix this.
NOTE: things are a little asymmetric now. For instance, we turn the
PLL on in "enable" but now we're not turning it off until
"post_disable". It would seem to make sense to move the PLL turning on
to "pre_enable" to match. Unfortunately, I don't believe that's
allowed. It looks as if (in the non-refclk mode which probably nobody
is using) we have to wait until the MIPI clock is there before we can
enable the PLL. In any case, the way it is here won't really
hurt--it'll just leave the PLL on a little longer.
Fixes:
a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.2.If8a8ec3bf1855cf0dbb62c005a71d6698c99c125@changeid
Douglas Anderson [Fri, 30 Jul 2021 15:46:00 +0000 (08:46 -0700)]
drm/dp: Don't zero PWMGEN_BIT_COUNT when driver_pwm_freq_hz not specified
The function drm_edp_backlight_init() is defined such that the
"driver_pwm_freq_hz" parameter is optional--it's 0 if you don't want
to futz with it. If you follow this variable through, you'll find out
that if it's 0 we won't ever set the "bl->pwmgen_bit_count", leaving
it as 0.
That means that before using it in drm_edp_backlight_enable() we need
to check to see if it's non-zero.
Programming this field to zero was confusing the panel I tested with
(Samsung ATNA33XC20). The backlight still worked somewhat but the
brightness values didn't correspond to what they should have been.
Fixes:
867cf9cd73c3 ("drm/dp: Extract i915's eDP backlight code into DRM helpers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.1.If017efce7116ae8ba015ed7def840c390a0e0c77@changeid
Desmond Cheong Zhi Xi [Fri, 30 Jul 2021 05:17:59 +0000 (13:17 +0800)]
drm: clean up unused kerneldoc in drm_lease.c
The kerneldoc in drm_lease.c is unused because none of the functions
are driver interfaces as the symbols are not exported.
Since they aren't used and much of the existing comments don't provide
any insights (e.g. they just repeat the function name or list out the
function parameters), they should be removed to make them easier to
maintain and to make useful info more obvious.
As a note, many of the comments mention whether idr_mutex should be
held, but these are mostly redundant in cases where the function
contains lockdep assertions or grabs the mutex.
To simplify review, here's the reasoning behind each update.
drm_lease_owner:
function name is self-descriptive
_drm_find_lessee:
function name is self-descriptive
_drm_lease_held_master:
function name and signature are self-descriptive
_drm_has_leased:
kerneldoc is summarized into a comment because the function name could
be interpreted ambiguously (check if the object has been leased VS
check if the master has a lease on the object)
_drm_lease_held:
Retain the idr_mutex comment because the function does not directly
grab the mutex or use a lockdep assertion.
Otherwise, the function name is self-descriptive.
drm_lease_held:
function name is self-descriptive
drm_lease_filter_crtcs:
Kerneldoc is summarized into a comment because the function name could
be interpreted ambiguously (filter leases based on crtcs mask VS
filter crtcs mask based on leases)
drm_lease_create:
Kerneldoc removed.
Useful function details such as atomic leasing are retained.
Errno interpretations are useful and retained.
drm_lease_destroy:
function name is self-descriptive. Additional information is also
removed as they're already present as comments inside the function.
_drm_lease_revoke:
function name is self-descriptive
drm_lease_revoke:
function name is self-descriptive
drm_mode_create_lease_ioctl:
Kerneldoc removed, but useful function details retained.
drm_mode_list_lessees_ioctl:
function name is self-descriptive. Additional details restate what the
code does.
drm_mode_get_lease_ioctl:
Function summary retained to clarify that it's the leased objects that
are returned, not the lease structure.
drm_mode_revoke_lease_ioctl:
Kerneldoc removed, but useful function details retained.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730051759.1570630-1-desmondcheongzx@gmail.com
Dave Airlie [Fri, 30 Jul 2021 06:48:35 +0000 (16:48 +1000)]
Merge tag 'amd-drm-next-5.15-2021-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.15-2021-07-29:
amdgpu:
- VCN/JPEG power down sequencing fixes
- Various navi pcie link handling fixes
- Clockgating fixes
- Yellow Carp fixes
- Beige Goby fixes
- Misc code cleanups
- S0ix fixes
- SMU i2c bus rework
- EEPROM handling rework
- PSP ucode handling cleanup
- SMU error handling rework
- AMD HDMI freesync fixes
- USB PD firmware update rework
- MMIO based vram access rework
- Misc display fixes
- Backlight fixes
- Add initial Cyan Skillfish support
- Overclocking fixes suspend/resume
amdkfd:
- Sysfs leak fix
- Add counters for vm faults and migration
- GPUVM TLB optimizations
radeon:
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
Dave Airlie [Fri, 30 Jul 2021 06:05:58 +0000 (16:05 +1000)]
Merge tag 'drm-msm-next-2021-07-28' of https://gitlab.freedesktop.org/drm/msm into drm-next
An early pull for v5.15 (there'll be more coming in a week or two),
consisting of the drm/scheduler conversion and a couple other small
series that one was based one. Mostly sending this now because IIUC
danvet wanted it in drm-next so he could rebase on it. (Daniel, if
you disagree then speak up, and I'll instead include this in the main
pull request once that is ready.)
This also has a core patch to drop drm_gem_object_put_locked() now
that the last use of it is removed.
[airlied: add NULL to drm_sched_init]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGumRk7H88bqV=H9Fb1SM0zPBo5B7NsCU3jFFKBYxf5k+Q@mail.gmail.com
Dave Airlie [Fri, 30 Jul 2021 04:51:22 +0000 (14:51 +1000)]
Merge tag 'drm-misc-next-2021-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
- Add modifiers for arm fixed rate compression.
Cross-subsystem Changes:
- Assorted dt binding fixes.
- Convert ssd1307fb to json-schema.
- Update a lot of irc channels to point to OFTC, as everyone moved there.
- Fix the same divide by zero for asilantfb, kyro, rivafb.
Core Changes:
- Document requirements for new atomic properties.
- Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers.
- Document drm_property_enum.value for bitfields.
- Add explicit _NO_ for MIPI_DSI flags that disable features.
- Assorted documentation fixes.
- Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core.
- Add logging and docs to RMFB ioctl.
- Assorted small fixes to dp_mst, master handling.
- Clarify drm lease usage.
Driver Changes:
- Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4.
- More drm -> linux irq conversions.
- Add support for some Logic Technologies and Multi-Inno panels.
- Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem.
- Add support for 2 AUO panels.
- Add damage handling to ssd1307fb.
- Improve FIFO handling on mxsfb.
- Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls.
- Improve sony acx424akp backlight handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com
Dave Airlie [Fri, 30 Jul 2021 01:28:11 +0000 (11:28 +1000)]
Merge tag 'du-next-
20210728' of git://linuxtv.org/pinchartl/media into drm-next
- R-Car DU shutdown fixes
- R-Car DU conversion to bridge connector helper
- Misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQGHjOSOw2G4+A3x@pendragon.ideasonboard.com
Maxime Ripard [Wed, 7 Jul 2021 09:36:32 +0000 (11:36 +0200)]
drm/vc4: hdmi: Remove unused struct
Commit
91e99e113929 ("drm/vc4: hdmi: Register HDMI codec") removed the
references to the vc4_hdmi_audio_component_drv structure, but not the
structure itself resulting in a warning. Remove it.
Fixes:
91e99e113929 ("drm/vc4: hdmi: Register HDMI codec")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-2-maxime@cerno.tech
Maxime Ripard [Wed, 7 Jul 2021 09:36:31 +0000 (11:36 +0200)]
drm/vc4: hdmi: Remove redundant variables
The vc4_hdmi_audio_prepare function and the functions it's calling have
in several occurences multiple dereferences of either the sample rate or
the number of channels.
It turns out that these variables are also passed through the hdmi codec
parameters structure. Convert all the users to use this structure, and
if it's used multiple times use a variable to store it instead of
dereferencing it every time.
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-1-maxime@cerno.tech
Desmond Cheong Zhi Xi [Wed, 28 Jul 2021 10:27:39 +0000 (18:27 +0800)]
drm: clarify usage of drm leases
We make the following changes to the documentation of drm leases to
make it easier to reason about their usage. In particular, we clarify
the lifetime and locking rules of lease fields in drm_master:
1. Make it clear that &drm_device.mode_config.idr_mutex protects the
lease idr and list structures for drm_master. The lessor field itself
doesn't need to be protected as it doesn't change after it's set in
drm_lease_create.
2. Add descriptions for the lifetime of lessors and leases.
3. Add an overview DOC: section in drm-uapi.rst that defines the
terminology for drm leasing, and explains how leases work and why
they're used.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728102739.441543-1-desmondcheongzx@gmail.com
Luben Tuikov [Wed, 28 Jul 2021 15:07:03 +0000 (11:07 -0400)]
drm/amd/pm: Fix a bug in semaphore double-lock
Fix a bug in smu_cmn_send_msg_without_waiting() in
that this function does not need to take the
smu->message_lock mutex in order to send a message
down to the SMU. The mutex is acquired by the
caller of this function instead.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Changfeng Zhu <Changfeng.Zhu@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Fixes:
5810323ba69289 ("drm/amd/pm: Fix a bug communicating with the SMU (v5)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 28 Jul 2021 09:00:53 +0000 (17:00 +0800)]
drm/amdgpu: enable psp front door loading by default for cyan_skillfish2
The function is ready on psp firmware, and enable it by default.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Mon, 26 Jul 2021 09:17:52 +0000 (17:17 +0800)]
drm/amdgpu: adjust fence driver enable sequence
Fence driver was enabled per ring when sw init on per IP block before.
Change to enable all the fence driver at the same time after
amdgpu_device_ip_init finished.
Rename some function related to fence to make it reasonable for read.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Fri, 23 Jul 2021 05:53:20 +0000 (13:53 +0800)]
drm/amdgpu: Added PSP13 BL loading support for additional drivers
Added BL loading support for soc/intf/dbg drivers
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Fri, 23 Jul 2021 03:12:57 +0000 (11:12 +0800)]
drm/amdgpu: Consolidated PSP13 BL FW loading
Remove duplicate code
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 22 Jul 2021 06:48:59 +0000 (14:48 +0800)]
drm/amdgpu: Added support for added psp driver binaries FW
Detect psp driver binaries packed into FW and try to load the FW
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 22 Jul 2021 06:07:31 +0000 (14:07 +0800)]
drm/amdgpu: Added latest PSP FW header
Improved handling for scalling PSP FW binaries
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 28 Jul 2021 01:59:57 +0000 (09:59 +0800)]
drm/amdgpu: remove the access of xxx_PSP_DEBUG on cycan_skillfish
It won't need to clear the xxx_PSP_DEBUG registers, because firmware
will handle this change.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Jul 2021 20:31:10 +0000 (16:31 -0400)]
drm/amdgpu/display: add support for multiple backlights
On platforms that support multiple backlights, register
each one separately. This lets us manage them independently
rather than registering a single backlight and applying the
same settings to both.
v2: fix typo:
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Walleij [Thu, 15 Jul 2021 09:28:08 +0000 (11:28 +0200)]
drm/panel-sony-acx424akp: Modernize backlight handling
This converts the internal backlight in the Sony ACX424AKP
driver to do it the canonical way:
- Assign the panel->backlight during probe.
- Let the panel framework handle the backlight.
- Make the backlight .set_brightness() turn the backlight
off completely if blank.
- Fix some dev_err_probe() use cases along the way.
Tested on the U8500 HREF520 reference design.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715092808.1100106-1-linus.walleij@linaro.org
Desmond Cheong Zhi Xi [Sat, 24 Jul 2021 11:18:22 +0000 (19:18 +0800)]
drm: use the lookup lock in drm_is_current_master
Inside drm_is_current_master, using the outer drm_device.master_mutex
to protect reads of drm_file.master makes the function prone to creating
lock hierarchy inversions. Instead, we can use the
drm_file.master_lookup_lock that sits at the bottom of the lock
hierarchy.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210724111824.59266-2-desmondcheongzx@gmail.com
Simon Ser [Sun, 25 Jul 2021 16:49:01 +0000 (16:49 +0000)]
maintainers: add bugs and chat URLs for amdgpu
Add links to the issue tracker and the IRC channel for the amdgpu
driver.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Pan Xinhui <Xinhui.Pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 21 Jul 2021 22:11:51 +0000 (18:11 -0400)]
drm/amdgpu/display: only enable aux backlight control for OLED panels
We've gotten a number of reports about backlight control not
working on panels which indicate that they use aux backlight
control. A recent patch:
commit
2d73eabe2984a435737498ab39bb1500a9ffe9a9
Author: Camille Cho <Camille.Cho@amd.com>
Date: Thu Jul 8 18:28:37 2021 +0800
drm/amd/display: Only set default brightness for OLED
[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.
[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes some other code to only use aux for backlight control on
OLED panels. The commit message seems to indicate that PWM should
be used for SDR mode on HDR panels. Do something similar for
backlight control in general. This may need to be revisited if and
when HDR started to get used.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 21 Jul 2021 10:52:35 +0000 (18:52 +0800)]
drm/amd/pm: restore user customized OD settings properly for Sienna Cichlid
Properly restore those committed and non-committed user customized OD
settings.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 21 Jul 2021 10:19:38 +0000 (18:19 +0800)]
drm/amd/pm: restore user customized OD settings properly for NV1x
The customized OD settings can be divided into two parts: those
committed ones and non-committed ones.
- For those changes which had been fed to SMU before S3/S4/Runpm
suspend kicked, they are committed changes. They should be properly
restored and fed to SMU on S3/S4/Runpm resume.
- For those non-committed changes, they are restored only without feeding
to SMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 26 Jul 2021 15:29:10 +0000 (11:29 -0400)]
Revert "Revert "drm/amdkfd: Add memory sync before TLB flush on unmap""
This reverts commit
4bba567c8c35a9cbcd16fb4780a0c3dfd162e08e.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 26 Jul 2021 15:27:53 +0000 (11:27 -0400)]
Revert "Revert "drm/amdgpu: Fix warning of Function parameter or member not described""
This reverts commit
4e7b93ca52fb228b177168d436449c5671415a72.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 26 Jul 2021 15:24:20 +0000 (11:24 -0400)]
Revert "Revert "drm/amdkfd: Make TLB flush conditional on mapping""
This reverts commit
7ed9876c9793bfe96fed58ba645d6c8e32f26001.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 26 Jul 2021 15:23:17 +0000 (11:23 -0400)]
Revert "Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update""
This reverts commit
024d8811c90ed56d8b90cdcf71e51c9fedeff460.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 26 Jul 2021 15:21:14 +0000 (11:21 -0400)]
Revert "Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping""
This reverts commit
430f8e6edbaac8abfddf76f1aef732d9c6257211.
Revert reason: Issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 18 Jul 2021 17:08:37 +0000 (13:08 -0400)]
drm/amd/display: 3.2.146
This version brings along following fixed:
- Guard DST_Y_PREFETCH register overflow in DCN21
- Add missing DCN21 IP parameter
- Fix PSR command version
- Add ETW logging for AUX failures
- Add ETW log to dmub_psr_get_state
- Fixed EdidUtility build errors
- Fix missing reg offset for the dmcub test debug registers
- Adding update authentication interface
- Remove unused functions of opm state query support
- Always wait for update lock status
- Refactor riommu invalidation wa
- Ensure dentist display clock update finished in DCN20
Reviewed-by: Hsieh Mike <Mike.Hsieh@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sun, 18 Jul 2021 01:46:31 +0000 (21:46 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.76
Reviewed-by: Cyr Aric <aric.cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dale Zhao [Fri, 16 Jul 2021 01:38:17 +0000 (09:38 +0800)]
drm/amd/display: ensure dentist display clock update finished in DCN20
[Why]
We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist
display clockis updated to target value. In some scenarios with large
display clock margin, it will deliver unfinished display clock and cause
issues like display black screen.
[How]
Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock
has been update to target value before driver do other clock related
actions.
Reviewed-by: Cyr Aric <aric.cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Fri, 9 Jul 2021 21:47:39 +0000 (17:47 -0400)]
drm/amd/display: refactor riommu invalidation wa
[Why]
A cleaner solution, only done once on boot.
[How]
Remove previous workaround and configure an extra
vmid one time on boot
Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Wed, 14 Jul 2021 18:21:08 +0000 (14:21 -0400)]
drm/amd/display: Always wait for update lock status
Remove code that would skip wait for lock status for Diags
FPGA case
Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 15 Jul 2021 18:55:28 +0000 (14:55 -0400)]
drm/amd/display: remove unused functions
[why]
It has been decided that opm state query support will be dropped.
Therefore link encryption enabled and save current encryption states
won't be used anymore and there are no foreseeable usages in the future.
We will remove these two interfaces for clean up.
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Wed, 14 Jul 2021 18:14:53 +0000 (14:14 -0400)]
drm/amd/display: add update authentication interface
[why]
Previously to toggle authentication, we need to remove and
add the same display back with modified adjustment.
This method will toggle DTM state without actual hardware changes.
This is not per design and would cause potential issues in the long run.
[how]
We are creating a dedicated interface that does the same thing as
remove and add back the display without changing DTM state.
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Fri, 9 Jul 2021 21:11:34 +0000 (17:11 -0400)]
drm/amd/display: fix missing reg offset
[Why]
Initializing was missing reg offsets for the dmcub test debug registers
causing assert
[How]
Add initialization
Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mark Morra [Mon, 28 Jun 2021 22:00:30 +0000 (18:00 -0400)]
drm/amd/display: Fixed EdidUtility build errors
[HOW]
Added #ifdefs and refactored various parts of dc to
allow dc_link to be built by AMD EDID UTILITY
[WHY]
dc_dsc was refactored moving some of the code that AMD EDID UTILITY needed
to dc_link, so now dc_link needs to be included by AMD EDID UTILITY
Squash in DCN config fix (Alex)
Reviewed-by: Leung Martin <Martin.Leung@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Mark Morra <MarkAlbert.Morra@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zack Rusin [Fri, 23 Jul 2021 16:51:53 +0000 (12:51 -0400)]
drm/vmwgfx: Use 2.19 version number to recognize mks-stats ioctls
To let the userspace recognize that it's running on top of a vmwgfx
that supports mks-stat ioctls we need to bump the version number.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-4-zackr@vmware.com
Zack Rusin [Fri, 23 Jul 2021 16:51:52 +0000 (12:51 -0400)]
drm/vmwgfx: Be a lot more flexible with MOB limits
The code was trying to keep a strict limit on the amount of mob
memory that was used in the guest by making it match the host
settings. There's technically no reason to do that (guests can
certainly use more than the host can have resident in renderers
at the same time).
In particular this is problematic because our userspace is not
great at handling OOM conditions and running out of MOB space
results in GL apps crashing, e.g. gnome-shell likes to allocate
huge surfaces (~61MB for the desktop on 2560x1600 with two workspaces)
and running out of memory there means that the gnome-shell crashes
on startup taking us back to the login and resulting in a system
where one can not login in graphically anymore.
Instead of letting the userspace crash we can extend available
MOB space, we just don't want to use all of the RAM for graphics,
so we're going to limit it to half of RAM.
With the addition of some extra logging this should make the
"guest has been configured with not enough graphics memory"
errors a lot easier to diagnose in cases where the automatic
expansion of MOB space fails.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-3-zackr@vmware.com
Zack Rusin [Fri, 23 Jul 2021 16:51:51 +0000 (12:51 -0400)]
drm/vmwgfx: Cleanup logging
The code was using the old DRM logging functions, which made it
hard to figure out what was coming from vmwgfx. The newer logging
helpers include the driver name in the logs and make it explicit
which driver they're coming from. This allows us to standardize
our logging a bit and clean it up in the process.
vmwgfx is a little special because technically the hardware it's
running on can be anything from the last 12 years or so which is
why we need to include capabilities in the logs in the first
place or otherwise we'd have no way of knowing what were
the capabilities of the platform the guest was running in.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-2-zackr@vmware.com
Zack Rusin [Fri, 23 Jul 2021 16:51:50 +0000 (12:51 -0400)]
drm/vmwgfx: Switch to using DRM_IOCTL_DEF_DRV
The macro has been accounting for DRM_COMMAND_BASE for a long time
now so there's no reason to still be duplicating it. Plus we were
leaving the name undefined which meant that all the DRM ioctl
warnings/errors were always listing "null" ioctl at the culprit.
This fixes the undefined ioctl name and removes duplicated code.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-1-zackr@vmware.com
Rob Clark [Wed, 28 Jul 2021 01:06:18 +0000 (18:06 -0700)]
drm/msm/gem: Mark active before pinning
Mark all the bos in the submit as active, before pinning, to prevent
evicting a buffer in the same submit to make room for a buffer earlier
in the table.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210728010632.2633470-14-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:17 +0000 (18:06 -0700)]
drm/msm: Utilize gpu scheduler priorities
The drm/scheduler provides additional prioritization on top of that
provided by however many number of ringbuffers (each with their own
priority level) is supported on a given generation. Expose the
additional levels of priority to userspace and map the userspace
priority back to ring (first level of priority) and schedular priority
(additional priority levels within the ring).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-13-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:16 +0000 (18:06 -0700)]
drm/msm: Drop struct_mutex in submit path
It is sufficient to serialize on the submit queue now.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-12-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:15 +0000 (18:06 -0700)]
drm/msm: Drop submit bo_list
This was only used to detect userspace including the same bo multiple
times in a submit. But ww_mutex can already tell us this.
When we drop struct_mutex around the submit ioctl, we'd otherwise need
to lock the bo before adding it to the bo_list. But since ww_mutex can
already tell us this, it is simpler just to remove the bo_list.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210728010632.2633470-11-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:14 +0000 (18:06 -0700)]
drm/msm: Conversion to drm scheduler
For existing adrenos, there is one or more ringbuffer, depending on
whether preemption is supported. When preemption is supported, each
ringbuffer has it's own priority. A submitqueue (which maps to a
gl context or vk queue in userspace) is mapped to a specific ring-
buffer at creation time, based on the submitqueue's priority.
Each ringbuffer has it's own drm_gpu_scheduler. Each submitqueue
maps to a drm_sched_entity. And each submit maps to a drm_sched_job.
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/4
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-10-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Laurent Pinchart [Thu, 15 Apr 2021 02:23:15 +0000 (05:23 +0300)]
drm: rcar-du: lvds: Use dev_err_probe()
Simplify error handling by using the dev_err_probe() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 15 Apr 2021 02:16:42 +0000 (05:16 +0300)]
drm: rcar-du: lvds: Don't set bridge driver_private field
The drm_bridge.driver_private field is set but never used. Don't set it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Mon, 25 May 2020 03:18:01 +0000 (06:18 +0300)]
drm: rcar-du: Use drm_bridge_connector_init() helper
Use the drm_bridge_connector_init() helper to create a drm_connector for
each output, instead of relying on the bridge drivers doing so. Attach
the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct
them not to create a connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Mon, 25 May 2020 04:05:26 +0000 (07:05 +0300)]
drm: rcar-du: dw-hdmi: Set output port number
Report the DT output port number in dw_hdmi_plat_data to connect to the
next bridge in the dw-hdmi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 15 Apr 2020 22:29:53 +0000 (01:29 +0300)]
drm: rcar-du: lvds: Convert to DRM panel bridge helper
Replace the manual panel handling with usage of the DRM panel bridge
helper. This simplifies the driver, and brings support for
DRM_BRIDGE_ATTACH_NO_CONNECTOR as an added bonus.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 14 May 2020 01:03:07 +0000 (04:03 +0300)]
drm: bridge: dw-hdmi: Attach to next bridge if available
On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings
require a video output port connected to an HDMI sink (most likely an
HDMI connector, in rare cases another bridges converting HDMI to another
protocol). For those platforms, retrieve the next bridge and attach it
from the dw-hdmi bridge attach handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Tue, 23 Mar 2021 21:50:08 +0000 (23:50 +0200)]
drm/bridge: Centralize error message when bridge attach fails
Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm_bridge_attach() to avoid code duplication.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Laurent Pinchart [Tue, 23 Mar 2021 00:09:53 +0000 (02:09 +0200)]
drm: rcar-du: Shutdown the display on remove
When the device is unbound from the driver (the DU being a platform
device, this occurs either when removing the DU module, or when
unbinding the device manually through sysfs), the display may be active.
Make sure it gets shut down.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Tue, 23 Mar 2021 00:09:53 +0000 (02:09 +0200)]
drm: rcar-du: Don't put reference to drm_device in rcar_du_remove()
The reference to the drm_device that was acquired by
devm_drm_dev_alloc() is released automatically by the devres
infrastructure. It must not be released manually, as that causes a
reference underflow..
Fixes:
ea6aae151887 ("drm: rcar-du: Embed drm_device in rcar_du_device")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Tue, 23 Mar 2021 00:09:53 +0000 (02:09 +0200)]
drm: rcar-du: Shutdown the display on system shutdown
When the system shuts down or warm reboots, the display may be active,
with the hardware accessing system memory. Upon reboot, the DDR will not
be accessible, which may cause issues.
Implement the platform_driver .shutdown() operation and shut down the
display to fix this.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Colin Ian King [Thu, 4 Feb 2021 18:33:44 +0000 (18:33 +0000)]
drm/bridge: make a const array static, makes object smaller
Don't populate the const array frs_limits on the stack but instead make
it static. Makes the object code smaller by 128 bytes:
Before:
text data bss dec hex filename
24845 7440 64 32349 7e5d ./drivers/gpu/drm/bridge/tc358768.o
After:
text data bss dec hex filename
24749 7408 64 32221 7ddd ./drivers/gpu/drm/bridge/tc358768.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Rob Clark [Wed, 28 Jul 2021 01:06:13 +0000 (18:06 -0700)]
drm/msm: Return ERR_PTR() from submit_create()
In the next patch, we start having more than a single potential failure
reason.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-9-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:12 +0000 (18:06 -0700)]
drm/msm: Track "seqno" fences by idr
Previously the (non-fd) fence returned from submit ioctl was a raw
seqno, which is scoped to the ring. But from UABI standpoint, the
ioctls related to seqno fences all specify a submitqueue. We can
take advantage of that to replace the seqno fences with a cyclic idr
handle.
This is in preperation for moving to drm scheduler, at which point
the submit ioctl will return after queuing the submit job to the
scheduler, but before the submit is written into the ring (and
therefore before a ring seqno has been assigned). Which means we
need to replace the dma_fence that userspace may need to wait on
with a scheduler fence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-8-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:11 +0000 (18:06 -0700)]
drm/msm: Consolidate submit bo state
Move all the locked/active/pinned state handling to msm_gem_submit.c.
In particular, for drm/scheduler, we'll need to do all this before
pushing the submit job to the scheduler. But while we're at it we can
get rid of the dupicate pin and refcnt.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-7-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:10 +0000 (18:06 -0700)]
drm/msm/submit: Simplify out-fence-fd handling
No need for this to be split in two parts.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:09 +0000 (18:06 -0700)]
drm: Drop drm_gem_object_put_locked()
Now that no one is using it, remove it.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20210728010632.2633470-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:08 +0000 (18:06 -0700)]
drm/msm: drop drm_gem_object_put_locked()
No idea why we were still using this. It certainly hasn't been needed
for some time. So drop the pointless twin codepaths.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:07 +0000 (18:06 -0700)]
drm/msm: Small submitqueue creation cleanup
If we don't have a gpu, there is no need to create a submitqueue, which
lets us simplify the error handling and submitqueue creation.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 28 Jul 2021 01:06:06 +0000 (18:06 -0700)]
drm/msm: Docs and misc cleanup
Fix a couple incorrect or misspelt comments, and add submitqueue doc
comment.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Mon, 26 Jul 2021 14:46:50 +0000 (07:46 -0700)]
drm/msm: Devfreq tuning
This adds a few things to try and make frequency scaling better match
the workload:
1) Longer polling interval to avoid whip-lashing between too-high and
too-low frequencies in certain workloads, like mobile games which
throttle themselves to 30fps.
Previously our polling interval was short enough to let things
ramp down to minimum freq in the "off" frame, but long enough to
not react quickly enough when rendering started on the next frame,
leading to uneven frame times. (Ie. rather than a consistent 33ms
it would alternate between 16/33/48ms.)
2) Awareness of when the GPU is active vs idle. Since we know when
the GPU is active vs idle, we can clamp the frequency down to the
minimum while it is idle. (If it is idle for long enough, then
the autosuspend delay will eventually kick in and power down the
GPU.)
Since devfreq has no knowledge of powered-but-idle, this takes a
small bit of trickery to maintain a "fake" frequency while idle.
This, combined with the longer polling period allows devfreq to
arrive at a reasonable "active" frequency, while still clamping
to minimum freq when idle to reduce power draw.
3) Boost. Because simple_ondemand needs to see a certain threshold
of busyness to ramp up, we could end up needing multiple polling
cycles before it reacts appropriately on interactive workloads
(ex. scrolling a web page after reading for some time), on top
of the already lengthened polling interval, when we see a idle
to active transition after a period of idle time we boost the
frequency that we return to.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210726144653.2180096-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Mon, 26 Jul 2021 14:46:49 +0000 (07:46 -0700)]
drm/msm: Split out get_freq() helper
In the next patch, it grows a bit more, so lets not duplicate the logic
in multiple places.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210726144653.2180096-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Mon, 26 Jul 2021 14:46:48 +0000 (07:46 -0700)]
drm/msm: Split out devfreq handling
Before we start adding more cleverness, split it into it's own file.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210726144653.2180096-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Mon, 26 Jul 2021 14:43:58 +0000 (07:43 -0700)]
drm/msm: Signal fences sooner
Nothing we do to in update_fences() can't be done in an atomic context,
so move this into the GPU's irq context to reduce latency (and call
dma_fence_signal() so we aren't relying on dma_fence_is_signaled() which
would defeat the purpose).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210726144359.2179302-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Mon, 26 Jul 2021 14:43:57 +0000 (07:43 -0700)]
drm/msm: Let fences read directly from memptrs
Let dma_fence::signaled, etc, read directly from the address that the hw
is writing with updated completed fence seqno, so we can potentially
notice that the fence is signaled sooner.
Plus add some docs.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210726144359.2179302-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rajkumar Subbiah [Tue, 6 Jul 2021 15:30:34 +0000 (08:30 -0700)]
drm/dp_mst: Fix return code on sideband message failure
Commit
2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing +
selftests") added some debug code for sideband message tracing. But
it seems to have unintentionally changed the behavior on sideband message
failure. It catches and returns failure only if DRM_UT_DP is enabled.
Otherwise it ignores the error code and returns success. So on an MST
unplug, the caller is unaware that the clear payload message failed and
ends up waiting for 4 seconds for the response. Fixes the issue by
returning the proper error code.
Changes in V2:
-- Revise commit text as review comment
-- add Fixes text
Changes in V3:
-- remove "unlikely" optimization
Fixes:
2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1625585434-9562-1-git-send-email-khsieh@codeaurora.org
Marek Vasut [Sun, 20 Jun 2021 22:49:46 +0000 (00:49 +0200)]
drm: mxsfb: Clear FIFO_CLEAR bit
Make sure the FIFO_CLEAR bit is latched in when configuring the
controller, so that the FIFO is really cleared. And then clear
the FIFO_CLEAR bit, since it is not self-clearing.
Fixes:
45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # i.Core MX8MM
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224946.189524-1-marex@denx.de
Marek Vasut [Mon, 26 Jul 2021 19:44:57 +0000 (21:44 +0200)]
drm: mxsfb: Use bus_format from the nearest bridge if present
In case there is a bridge connected to the LCDIF, use bus_format
from the bridge, otherwise behave as before and use bus_format
from the connector. This way, even if there are multiple bridges
in the display pipeline, the LCDIF will use the correct format.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726194457.341696-1-marex@denx.de
Marek Vasut [Sun, 20 Jun 2021 22:47:59 +0000 (00:47 +0200)]
drm: mxsfb: Increase number of outstanding requests on V4 and newer HW
In case the DRAM is under high load, the MXSFB FIFO might underflow
and that causes visible artifacts. This could be triggered on i.MX8MM
using e.g. "$ memtester 128M" on a device with 1920x1080 panel. The
first "Stuck Address" test of the memtester will completely corrupt
the image on the panel and leave the MXSFB FIFO in odd state.
To avoid this underflow, increase number of outstanding requests to
DRAM from 2 to 16, which is the maximum. This mitigates the issue
and it can no longer be triggered.
Fixes:
45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224759.189351-1-marex@denx.de
Marek Vasut [Sun, 20 Jun 2021 22:47:01 +0000 (00:47 +0200)]
drm: mxsfb: Enable recovery on underflow
There is some sort of corner case behavior of the controller,
which could rarely be triggered at least on i.MX6SX connected
to 800x480 DPI panel and i.MX8MM connected to DPI->DSI->LVDS
bridged 1920x1080 panel (and likely on other setups too), where
the image on the panel shifts to the right and wraps around.
This happens either when the controller is enabled on boot or
even later during run time. The condition does not correct
itself automatically, i.e. the display image remains shifted.
It seems this problem is known and is due to sporadic underflows
of the LCDIF FIFO. While the LCDIF IP does have underflow/overflow
IRQs, neither of the IRQs trigger and neither IRQ status bit is
asserted when this condition occurs.
All known revisions of the LCDIF IP have CTRL1 RECOVER_ON_UNDERFLOW
bit, which is described in the reference manual since i.MX23 as
"
Set this bit to enable the LCDIF block to recover in the next
field/frame if there was an underflow in the current field/frame.
"
Enable this bit to mitigate the sporadic underflows.
Fixes:
45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224701.189289-1-marex@denx.de
Wyatt Wood [Mon, 12 Jul 2021 16:30:50 +0000 (12:30 -0400)]
drm/amd/display: Add ETW log to dmub_psr_get_state
[Why]
GPINT commands have the lowest priority in DMCUB, so it's possible
that the command isn't processed in time.
[How]
Add a log to help identify this case.
Reviewed-by: Koo Anthony <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Mon, 12 Jul 2021 16:12:48 +0000 (12:12 -0400)]
drm/amd/display: Add ETW logging for AUX failures
[Why]
Would like to identify the cause of AUX transactions failing
via ETW logs.
[How]
Add ETW logging for AUX failures.
Reviewed-by: Pavic Josip <Josip.Pavic@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Wed, 14 Jul 2021 10:41:13 +0000 (06:41 -0400)]
drm/amd/display: Fix PSR command version
[why]
For dual eDP when setting the new settings we need to set
command version to DMUB_CMD_PSR_CONTROL_VERSION_1, otherwise
DMUB will not read panel_inst parameter.
[how]
Instead of PSR_VERSION_1 pass DMUB_CMD_PSR_CONTROL_VERSION_1
Reviewed-by: Wood Wyatt <Wyatt.Wood@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Tue, 6 Jul 2021 19:45:11 +0000 (15:45 -0400)]
drm/amd/display: Add missing DCN21 IP parameter
[why]
IP parameter min_meta_chunk_size_bytes is read for bandwidth
calculations but it was never defined.
[how]
Define min_meta_chunk_size_bytes and initialize value to 256.
Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pratik Vishwakarma [Mon, 26 Jul 2021 08:24:25 +0000 (13:54 +0530)]
drm/amdgpu: Rename amdgpu_acpi_is_s0ix_supported
Rename amdgpu_acpi_is_s0ix_supported to better explain
functionality by renaming to amdgpu_acpi_is_s0ix_active
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Thu, 8 Jul 2021 18:50:48 +0000 (14:50 -0400)]
drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21
[why]
DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are
too large due to the former being limited to 8 bits.
[how]
Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk
period.
Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pratik Vishwakarma [Fri, 23 Jul 2021 12:38:40 +0000 (18:08 +0530)]
drm/amdgpu: Check pmops for desired suspend state
[Why]
User might change the suspend behaviour from OS.
[How]
Check with pm for target suspend state and set s0ix
flag only for s2idle state.
v2: User might change default suspend state, use target state
v3: squash in build fix
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Geert Uytterhoeven [Tue, 27 Jul 2021 13:47:30 +0000 (15:47 +0200)]
video: fbdev: ssd1307fb: Cache address ranges
Cache the column and page ranges, to avoid doing unneeded I2C transfers
when the values haven't changed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-6-geert@linux-m68k.org
Geert Uytterhoeven [Tue, 27 Jul 2021 13:47:29 +0000 (15:47 +0200)]
video: fbdev: ssd1307fb: Optimize screen updates
Currently, each screen update triggers an I2C transfer of all screen
data, up to 1 KiB of data for a 128x64 display, which takes at least 20
ms in Fast mode.
Reduce the amount of transferred data by only updating the rectangle
that changed. Remove the calls to ssd1307fb_set_col_range() and
ssd1307fb_set_page_range() during initialization, as
ssd1307fb_update_rect() now takes care of that.
Note that for now the optimized operation is only used for fillrect,
copyarea, and imageblit, which are used by fbcon.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-5-geert@linux-m68k.org
Geert Uytterhoeven [Tue, 27 Jul 2021 13:47:28 +0000 (15:47 +0200)]
video: fbdev: ssd1307fb: Extract ssd1307fb_set_{col,page}_range()
Extract the code to set the column and page ranges into two helper
functions.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-4-geert@linux-m68k.org
Geert Uytterhoeven [Tue, 27 Jul 2021 13:47:27 +0000 (15:47 +0200)]
video: fbdev: ssd1307fb: Simplify ssd1307fb_update_display()
Simplify the nested loops to handle conversion from linear frame buffer
to ssd1307 page layout:
1. Move last page handling one level up, as the value of "m" is the
same inside a page,
2. array->data[] is filled linearly, so there is no need to
recalculate array_idx over and over again; a simple increment is
sufficient.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-3-geert@linux-m68k.org
Geert Uytterhoeven [Tue, 27 Jul 2021 13:47:26 +0000 (15:47 +0200)]
video: fbdev: ssd1307fb: Propagate errors via ssd1307fb_update_display()
Make ssd1307fb_update_display() return an error code, so callers that
can handle failures can propagate it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727134730.3765898-2-geert@linux-m68k.org
Simon Ser [Mon, 26 Jul 2021 07:50:32 +0000 (07:50 +0000)]
drm: document DRM_IOCTL_MODE_RMFB
Since there's no struct to attach the docs to, document the IOCTL
definition.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ephVkof3uGu2RpOdBbrHE3qF98zBfIBRzXe4Vyoboh0@cp4-web-034.plabs.ch
Simon Ser [Mon, 26 Jul 2021 07:49:06 +0000 (07:49 +0000)]
drm: add logging for RMFB ioctl
We already have logging for ADDFB2. Add some logging for RMFB as
well.
This can be handy when trying to find out why a CRTC gets magically
disabled.
v2: make log message more explicit, add log messages to
drm_framebuffer_remove (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/EghsoRDcn1SJV0nxVqRCisPd7v0627yLZbBjn4A8Yg@cp3-web-048.plabs.ch
Maarten Lankhorst [Tue, 27 Jul 2021 10:48:17 +0000 (12:48 +0200)]
Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Daniel Vetter [Fri, 23 Jul 2021 08:34:57 +0000 (10:34 +0200)]
drm/plane: Move drm_plane_enable_fb_damage_clips into core
We're trying to have a fairly strict split between core functionality
that defines the uapi, including the docs, and the helper functions to
implement it.
Move drm_plane_enable_fb_damage_clips and associated kerneldoc into
drm_plane from drm_damage_helper.c to fix this.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-3-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 23 Jul 2021 08:34:56 +0000 (10:34 +0200)]
drm/plane: check that fb_damage is set up when used
There's two stages of manual upload/invalidate displays:
- just handling dirtyfb and uploading the entire fb all the time
- looking at damage clips
In the latter case we support it through fbdev emulation (with
fb_defio), atomic property, and with the dirtfy clip rects.
Make sure at least the atomic property is set up as the main official
interface for this. Ideally we'd also check that
drm_atomic_helper_dirtyfb() is used and that fbdev defio is set up,
but that's quite a bit harder to do. Ideas very much welcome.
From a cursor audit drivers seem to be getting this right mostly, but
better to make sure. At least no one is bypassing the accessor
function.
v2:
- use drm_warn_once with a meaningful warning string (José)
- don't splat in the atomic check code for everyone (intel-gfx-ci)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-2-daniel.vetter@ffwll.ch