OSDN Git Service
Haim Dreyfuss [Sun, 29 Oct 2017 12:38:37 +0000 (14:38 +0200)]
iwlwifi: api: Add geographic profile information to MCC_UPDATE_CMD
Some geographic profiles require specific handling. For example ETSI
profile requires special channel access handling. Add geographic
profile information to MCC_UPDATE response to allow it.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Wed, 28 Mar 2018 08:15:09 +0000 (11:15 +0300)]
iwlwifi: add a bunch of new 9000 PCI IDs
A lot of new PCI IDs were added for the 9000 series. Add them to the
list of supported PCI IDs.
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ayala Beker [Wed, 13 Dec 2017 13:20:21 +0000 (15:20 +0200)]
iwlwifi: fw api: support the new scan request FW API version
Remove fragmented_dwell_time and add num_of_fragments to support
the new API version.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ilan Peer [Mon, 22 Jan 2018 14:44:09 +0000 (16:44 +0200)]
iwlwifi: mvm: Allow iwl_mvm_mac_mgd_prepare_tx() when associated
The FW does not allocate quota air time for the binding of a station
MAC before iwlmvm indicates that it is associated. Currently iwlmvm
indicates that the MAC is associated only after hearing a beacon from
the AP. In case a deauthentication frame is sent before the MAC is
associated, the frame might not be sent as the corresponding binding
is not scheduled.
To handle such cases, set IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP in the
HW flags, requesting mac80211 to call the mgd_prepare_tx() callback
before transmitting a deauthentication frame if associated but no
beacon was heard from the AP.
In addition, do not warn in iwl_mvm_mac_mgd_prepare_tx() when already
associated as now the callback can be called also when associated.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Zamir, Roee [Thu, 11 May 2017 08:56:15 +0000 (11:56 +0300)]
iwlwifi: mvm: add support for oce
Add support for Optimized Connectivity Experience (OCE). Get
capabilities from the fw, expose them with nl80211, and enable them in
UMAC scan if the relevant nl80211 flags are set by the userspace.
Signed-off-by: Roee Zamir <roee.zamir@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Zamir, Roee [Thu, 30 Mar 2017 13:34:51 +0000 (16:34 +0300)]
iwlwifi: mvm: add adaptive dwell support
Update the scan command API with support for adaptive dwell. Adaptive
dwell is a type of scan that dynamically changes the time it remains
on each channel listening for beacons or probe responses.
Signed-off-by: Roee Zamir <roee.zamir@intel.com>
Signed-off-by: Beni Lev <beni.lev@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Mon, 18 Dec 2017 18:13:07 +0000 (20:13 +0200)]
iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txq
Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue ==
IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF)
which is way too large for the u16 we used to store it in
hw_queue_to_mac820211. If this happens the following UBSAN warning
will be generated:
[ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5
[ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int'
Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and,
while at it, add a warning if the queue number is larger than
IEEE80211_MAX_QUEUES.
Fixes:
34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path")
Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Mordechay Goodstein [Tue, 19 Dec 2017 10:24:44 +0000 (10:24 +0000)]
iwlwifi: set default timstamp marker cmd
In case debug configuration is started with LDBG cmd also start timestamp
marker for syncing logs witn the FW.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Mon, 18 Dec 2017 12:10:47 +0000 (14:10 +0200)]
iwlwifi: mvm: move TSO segment to a separate function
This makes future bail-outs from transmitting an AMSDU more
readable.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Tue, 19 Dec 2017 07:19:32 +0000 (09:19 +0200)]
iwlwifi: mvm: take RCU lock before dereferencing
RCU isn't properly locked.
Fixes:
46d372af9935 ("iwlwifi: mvm: rs: new rate scale API - add FW notifications")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sara Sharon [Tue, 19 Dec 2017 09:09:41 +0000 (11:09 +0200)]
iwlwifi: mvm: flip AMSDU addresses only for 9000 family
Hardware bug was fixed in later generation.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Kalle Valo [Wed, 28 Mar 2018 08:57:34 +0000 (11:57 +0300)]
Merge git://git./linux/kernel/git/kvalo/wireless-drivers.git
Requested by Luca, needed for upcoming patch "iwlwifi: add a bunch of new 9000
PCI IDs".
Lorenzo Bianconi [Sat, 17 Mar 2018 14:01:39 +0000 (15:01 +0100)]
mt76x2: fix warning in ieee80211_get_key_rx_seq()
Fall back to software encryption for hw unsupported ciphers in order
to fix the following warning in ieee80211_get_key_rx_seq routine:
WARNING: CPU: 1 PID: 1277 at backports-2017-11-01/net/mac80211/key.c:
1010 mt76_wcid_key_setup+0x6c/0x138 [mt76]
CPU: 1 PID: 1277 Comm: hostapd Tainted: G W 4.9.86 #0
Stack :
00000000 00000000 80527b4a 00000042 80523824 00000000 00000000 80520000
8fd79a9c 804bbda7 80454c84 00000001 000004fd 80523824 8f7e4ba0 8eceda12
00000010 8006af94 00000001 80520000 804c1f04 804c1f08 80459890 8ec999b4
00000003 800a7840 8f7e4ba0 8eceda12 8121de20 00000000 00000001 00c999b4
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
...
Call Trace:
[<
8000f52c>] show_stack+0x70/0x8c
[<
801d8d04>] dump_stack+0x94/0xd0
[<
8002bcd4>] __warn+0x110/0x118
[<
8002bd70>] warn_slowpath_null+0x1c/0x2c
[<
8f0415cc>] mt76_wcid_key_setup+0x6c/0x138 [mt76]
[<
8f1311b4>] mt76x2_dma_cleanup+0xa38/0x1048 [mt76x2e]
Fixes:
30ce7f4456ae ("mt76: validate rx CCMP PN")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Lorenzo Bianconi [Sat, 17 Mar 2018 11:29:27 +0000 (12:29 +0100)]
mt76x2: fix possible NULL pointer dereferencing in mt76x2_tx()
Fix a theoretical NULL pointer dereferencing in mt76x2_tx routine that
can occurs for injected frames in a monitor vif since vif pointer could
be NULL for that interfaces
Fixes:
23405236460b ("mt76: fix transmission of encrypted mgmt frames")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Lorenzo Bianconi [Thu, 15 Mar 2018 17:24:20 +0000 (18:24 +0100)]
mt76: use mt76_poll_msec routine in mt76pci_load_firmware()
Use mt76_poll_msec() in mt76pci_load_firmware to check if the firmware
has been started instead of explicitly poll MCU running register
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Takashi Iwai [Fri, 16 Mar 2018 15:41:49 +0000 (16:41 +0100)]
brcmsmac: allocate ucode with GFP_KERNEL
The brcms_ucode_init_buf() duplicates the ucode chunks via kmemdup()
with GFP_ATOMIC as a precondition of wl->lock acquired. This caused
allocation failures sometimes as reported in the bugzilla below.
When looking at the the real usage, one can find that it's called
solely from brcms_request_fw(), and it's obviously outside the lock.
Hence we can use GFP_KERNEL there safely for avoiding such allocation
errors.
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=
1085174
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:31 +0000 (21:28 +0100)]
brcmfmac: add kerneldoc for struct brcmf_bus::msgbuf
This field did not have kerneldoc description so adding it now.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:30 +0000 (21:28 +0100)]
brcmfmac: get rid of brcmf_fw_get_full_name()
The function was pretty minimal and now it is called only from one
place so just get rid of it.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:29 +0000 (21:28 +0100)]
brcmfmac: get rid of brcmf_fw_map_chip_to_name()
The function is no longer used so removing it.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:28 +0000 (21:28 +0100)]
brcmfmac: add extension to .get_fwname() callbacks
This changes the bus layer api by having the caller provide an
extension. With this the callback can use brcmf_fw_alloc_request()
to get the needed firmware name.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:27 +0000 (21:28 +0100)]
brcmfmac: introduce brcmf_fw_alloc_request() function
The function brcmf_fw_alloc_request() takes a list of required files
and allocated the struct brcmf_fw_request instance accordingly. The
request can be modified by the caller before being passed to the
brcmf_fw_request_firmwares() function.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:26 +0000 (21:28 +0100)]
brcmfmac: pass struct in brcmf_fw_get_firmwares()
Make the function brcmf_fw_get_firmwares() a bit more easy to extend
using a structure to pass the request parameters.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:25 +0000 (21:28 +0100)]
brcmfmac: derive firmware filenames from basename mapping
Instead of defining individual filenames for firmware and nvram
use a basename and derive the names from that.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:24 +0000 (21:28 +0100)]
brcmfmac: use wiphy debugfs dir entry
The driver used to create a brcmfmac dir entry at the top level
debugfs mount point. This moves the debugfs entries into the
wiphy debugfs dir entry.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:23 +0000 (21:28 +0100)]
brcmfmac: allocate struct brcmf_pub instance using wiphy_new()
Rework the driver so the wiphy instance holds the main driver information
in its private buffer. Previously it held struct brcmf_cfg80211_info
instance so a bit of reorg was needed. This was done so that the wiphy
name or its parent device can be shown in debug output.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:22 +0000 (21:28 +0100)]
brcmfmac: use brcmf_chip_name() for consistency
When logging the chip id/revision information make use of
brcmf_chip_name() so it is always the same.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:21 +0000 (21:28 +0100)]
brcmfmac: use brcmf_chip_name() to store name in revinfo
The chip id can either be four or five digits. For the chip name either
the hexadecimal value needs to be taken (four digits) or the decimal
value (five digits). The function brcmf_chip_name() does this conversion
so use it to store the name in driver revision info.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:20 +0000 (21:28 +0100)]
brcmfmac: do not convert linux error to firmware error string
In case of a linux error brcmf_fil_cmd_data() blurts an error message
in which the error code is translated to an error string. However, it
maps it to a firmware error string which should not happen. Simply
print only the numeric error code and be done with it.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Mon, 19 Mar 2018 10:40:54 +0000 (10:40 +0000)]
rtlwifi: rtl8821ae: fix spelling mistake: "Aboslute" -> "Absolute"
Trivial fix to spelling mistake in RT_TRACE message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net?
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Kevin Lo [Sat, 17 Mar 2018 14:26:07 +0000 (22:26 +0800)]
rtlwifi: correct comment
Correct comment. Set bit 3 and bit 4 of 0x0005 register (REG_APS_FSMCO + 1)
to 0 which means disable WL suspend, not enable WL suspend.
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:50 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add new but dummy definitions introduced by 8822b
btcoex support multiple platforms, but this drivers doesn't support full
functions yet, so this commit adds dummy definitions.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:49 +0000 (09:25 +0800)]
rtlwifi: btcoex: new definitions introduced by 8822be
New constant and variables definitions are used by btcoex of 8822b, so
this commit add them.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:48 +0000 (09:25 +0800)]
rtlwifi: btcoex: add assoc type v2 to connection notify
In connection notify v1, btcoex only need to know start/end association,
and it will discriminate 2G and 5G band in v2.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:47 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add pre- and post- normal LPS function
Normal LPS is decomposed into pre- and post- parts, so we can issue H2C
with TDMA parameters in the "critical section" that dirver can't change
LPS state at the moment.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:46 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add interaction with phydm
Get phydm's counter and version from the module phydm that is not
submitted so we implement dummy functions.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:45 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add rate table for the use of btcoex
The btcoex use the rate to rsolve IOT issue that some APs reduce TX
rate quickly, so it uses the RX rate as a clue to decide TDMA.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger#lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:44 +0000 (09:25 +0800)]
rtlwifi: btcoex: Get status of multichannel concurrence
btcoex does different decision according to MCC or SCC status, but
driver is still SCC currently.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:43 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add customer_id to do special deal to oem vendor
Add customer_id field in structure, and then this is a clue to implement
the behavior defined by vendor LENOVO_CHINA.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:42 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add enum DM_INFO for btcoex to query dm's counters
btcoex uses dm's counters to check the environment is noisy or not. If it
is clean, btcoex set more time slots to WiFi so that it can transmit as
soon as possible. That will save time, and BT will have more time slots
after WiFi traffic is complete.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:41 +0000 (09:25 +0800)]
rtlwifi: remove redundant statement found by static checker
smatch reports "rtl_is_special_data() warn: inconsistent indenting", but
it is an obvious redundant statement so remove it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:40 +0000 (09:25 +0800)]
rtlwifi: Add modifier static to functions reported by sparse
sparse reports some functions were not declared, so add 'static' as
modifier. Remove an unused function btc8821a1ant_is_wifi_status_changed()
exposed due to 'static'.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Amitkumar Karwar [Tue, 20 Mar 2018 13:40:41 +0000 (19:10 +0530)]
rsi: fix kernel panic observed on 64bit machine
Following kernel panic is observed on 64bit machine while loading
the driver. It is fixed if we pass dynamically allocated memory to
SDIO for DMA.
BUG: unable to handle kernel paging request at
ffffeb04000172e0
IP: sg_miter_stop+0x56/0x70
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth
ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle
drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3
CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ #27
Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS
A19 06/13/2013
RIP: 0010:sg_miter_stop+0x56/0x70
RSP: 0018:
ffff88007d003e78 EFLAGS:
00010002
RAX:
0000000000000003 RBX:
0000000000000004 RCX:
0000000000000000
RDX:
ffffeb04000172c0 RSI:
ffff88002f58002c RDI:
ffff88007d003e80
RBP:
0000000000000004 R08:
ffff88007d003e80 R09:
0000000000000008
R10:
0000000000000003 R11:
0000000000000001 R12:
0000000000000004
R13:
ffff88002f580028 R14:
0000000000000000 R15:
0000000000000004
FS:
00007f35c29db700(0000) GS:
ffff88007d000000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffeb04000172e0 CR3:
000000007038e000 CR4:
00000000000406f0
Call Trace:
<IRQ>
sg_copy_buffer+0xc6/0xf0
sdhci_tasklet_finish+0x170/0x260 [sdhci]
tasklet_action+0xf4/0x100
__do_softirq+0xef/0x26e
irq_exit+0xbe/0xd0
do_IRQ+0x4a/0xc0
common_interrupt+0xa2/0xa2
</IRQ>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Amitkumar Karwar [Tue, 20 Mar 2018 13:40:40 +0000 (19:10 +0530)]
rsi: fix error path handling in SDIO probe
We miss to release IRQ in certain error path in SDIO probe which
causes following kernel panic. This patch corrects error path
handling
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: (null)
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
Call Trace:
<IRQ>
? call_timer_fn+0x29/0x120
? run_timer_softirq+0x1da/0x420
? timer_interrupt+0x11/0x20
? __do_softirq+0xef/0x26e
? irq_exit+0xbe/0xd0
? do_IRQ+0x4a/0xc0
? common_interrupt+0xa2/0xa2
</IRQ>
? cpuidle_enter_state+0x118/0x250
? do_idle+0x186/0x1e0
? cpu_startup_entry+0x6f/0x80
? start_kernel+0x47c/0x49c
? secondary_startup_64+0xa5/0xb0
Fixes:
50117605770c ("rsi: improve RX handling in SDIO interface")
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Wed, 14 Mar 2018 14:12:39 +0000 (14:12 +0000)]
rsi: remove redundant duplicate assignment of buffer_size
Variable buffer_size is re-assigned the same value, this duplicated
assignment is redundant and can be removed.
Cleans up clang warning:
drivers/net/wireless/rsi/rsi_91x_usb.c:140:4: warning: Value stored
to 'buffer_size' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tobin C. Harding [Thu, 15 Mar 2018 02:31:25 +0000 (13:31 +1100)]
rsi: Remove stack VLA usage
The use of stack Variable Length Arrays needs to be avoided, as they
can be a vector for stack exhaustion, which can be both a runtime bug
(kernel Oops) or a security flaw (overwriting memory beyond the
stack). Also, in general, as code evolves it is easy to lose track of
how big a VLA can get. Thus, we can end up having runtime failures
that are hard to debug. As part of the directive[1] to remove all VLAs
from the kernel, and build with -Wvla.
Currently rsi code uses a VLA based on a function argument to
`rsi_sdio_load_data_master_write()`. The function call chain is
Both these functions
rsi_sdio_reinit_device()
rsi_probe()
start the call chain:
rsi_hal_device_init()
rsi_load_fw()
auto_fw_upgrade()
ping_pong_write()
rsi_sdio_load_data_master_write()
[Without familiarity with the code] it appears that none of the 4 locks
mutex
rx_mutex
tx_mutex
tx_bus_mutex
are held when `rsi_sdio_load_data_master_write()` is called. It is therefore
safe to use kmalloc with GFP_KERNEL.
We can avoid using the VLA by using `kmalloc()` and free'ing the memory on all
exit paths.
Change buffer from 'u8 array' to 'u8 *'. Call `kmalloc()` to allocate memory for
the buffer. Using goto statement to call `kfree()` on all return paths.
It can be expected that this patch will result in a small increase in overhead
due to the use of `kmalloc()` however this code is only called on initialization
(and re-initialization) so this overhead should not degrade performance.
[1] https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ganapathi Bhat [Thu, 15 Mar 2018 06:20:32 +0000 (11:50 +0530)]
mwifiex: remove warnings in mwifiex_cmd_append_11n_tlv()
Fix the following sparse warning in mwifiex_cmd_append_11n_tlv:
drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:358:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:358:65: right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: right side has type int
Fixes:
77423fa73927 ("mwifiex: fix incorrect ht capability problem")
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Joe Perches [Fri, 23 Mar 2018 22:54:37 +0000 (15:54 -0700)]
wireless: Use octal not symbolic permissions
Prefer the direct use of octal for permissions.
Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.
Miscellanea:
o Whitespace neatening around these conversions.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arnd Bergmann [Thu, 15 Mar 2018 21:18:24 +0000 (22:18 +0100)]
Bluetooth: btrsi: rework dependencies
The linkage between the bluetooth driver and the wireless
driver is not defined properly, leading to build problems
such as:
warning: (BT_HCIRSI) selects RSI_COEX which has unmet direct dependencies (NETDEVICES && WLAN && WLAN_VENDOR_RSI && BT_HCIRSI && RSI_91X)
drivers/net/wireless/rsi/rsi_91x_main.o: In function `rsi_read_pkt':
(.text+0x205): undefined reference to `rsi_bt_ops'
As the dependency is actually the reverse (RSI_91X uses
the BT_RSI driver, not the other way round), this changes
the dependency to match, and enables the bluetooth driver
from the RSI_COEX symbol.
Fixes:
38aa4da50483 ("Bluetooth: btrsi: add new rsi bluetooth driver")
Acked-by; Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Kalle Valo [Tue, 27 Mar 2018 07:06:18 +0000 (10:06 +0300)]
Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git
ath.git patches for 4.17. Major changes:
wil6210
* support multiple virtual interfaces
Ramon Fried [Sun, 11 Mar 2018 12:01:43 +0000 (14:01 +0200)]
wcn36xx: Check DXE IRQ reason
IRQ reason was not cheked for errors.
Although error handing is not currently supported, it
will be nice to output an error value to the log if the
DMA operation failed.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ramon Fried [Sun, 11 Mar 2018 12:01:18 +0000 (14:01 +0200)]
wcn36xx: calculate DXE default channel values
DXE channel defaults used hardcoded magic values.
Added bit definitions of the control register and
calculate this values in compilation for clarity.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ramon Fried [Sun, 4 Mar 2018 16:31:34 +0000 (18:31 +0200)]
wcn36xx: calculate DXE control registers values
DXE descriptor control registers used hardcoded magic values. Added bit
definitions of the control register and calculate this values in compilation
for clarity. No functional changes.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Peter Große [Tue, 6 Mar 2018 14:57:18 +0000 (15:57 +0100)]
ath9k: spelling s/premble/preamble/
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Sebastian Gottschall [Sat, 3 Mar 2018 04:10:44 +0000 (05:10 +0100)]
ath9k: fix crash in spectral scan
Fixes crash seen on arm smp systems (gateworks ventana imx6):
Unable to handle kernel NULL pointer dereference at virtual address
00000014
pgd =
80004000
[
00000014] *pgd=
00000000
Internal error: Oops - BUG: 17 [#1] PREEMPT SMP ARM
Modules linked in: ip6table_filter nf_conntrack_ipv6 ip6_tables nf_log_ipv6 nf_defrag_ipv6 shortcut_fe ipcomp6 xfrm_ipcomp xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_ro xfrm6_mode_beet ip6_tunnel tunnel6 mip6 ah6 esp6 xfrm_algo sit ip_tunnel tunnel4 ipv6 ath10k_pci ath10k_core ath9k ath mac80211 cfg80211 compat ath_pci ath_hal(P) caamalg authencesn authenc caamrng caamhash caam_jr caam cdc_ncm usbnet usbcore sky2 imx2_wdt
CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: P 4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task:
bf064980 task.stack:
bf07c000
PC is at relay_buf_full+0xc/0x30
LR is at _674+0x740/0xf10 [ath9k]
pc : [<
8018bce0>] lr : [<
7f1aa604>] psr:
80000013
sp :
bf07dbf0 ip :
bf07dc00 fp :
bf07dbfc
r10:
0000003f r9 :
bf130e00 r8 :
809044b0
r7 :
00000000 r6 :
be67a9f0 r5 :
00000000 r4 :
809043e4
r3 :
c0864c24 r2 :
00000000 r1 :
00000004 r0 :
00000000
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control:
10c5387d Table:
4e6a004a DAC:
00000055
Process ksoftirqd/0 (pid: 3, stack limit = 0xbf07c210)
Stack: (0xbf07dbf0 to 0xbf07e000)
dbe0:
bf07dd04 bf07dc00 7f1aa604 8018bce0
dc00:
00004014 be59e010 bf07dc34 bf07dc18 7f1a7084 7f19c07c be59c010 be6470a0
dc20:
0000096c be648954 bf07dc6c bf07dc38 7f1c286c bf07dd90 bf07dc5c bf07dc48
dc40:
8029ea4c 0000003c 00000001 be59c010 00000094 00000000 00000000 00000000
dc60:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dc80:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dca0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dcc0:
00000000 00000000 00000000 00000000 00000000 00000000 8010ef24 00000030
dce0:
be94f5e8 be6485a0 bddf0200 be59c010 be6465a0 be6415a0 bf07ddf4 bf07dd08
dd00:
7f1cf800 7f1aa55c 1fc38c4c 00000000 bf07dd58 cccccccd 66666667 be640bc0
dd20:
bf07dd54 be6415a0 1fc38c4c 00000000 00000000 be59c038 be67a9c0 be59e010
dd40:
be67a9f0 be647170 8090c904 be59c010 00000000 00000001 1fc38e84 00000000
dd60:
be640bc0 bddf0200 00000200 00000010 0000003f 00000002 20000013 be59c010
dd80:
8092d940 bf7ca2c0 bf07ddb4 bf07dd98 1fc38c4c 2602003f 0100ff1b 80ff1b00
dda0:
00808080 00000000 00000000 80808080 80808080 80808080 80808080 00008080
ddc0:
00000000 00000000 7f1b62b8 00000002 be6470ec be6470f0 00000000 bf07de98
dde0:
8092d940 be6415a0 bf07de94 bf07ddf8 7f1d1ed8 7f1cf1fc 00000000 00000000
de00:
bf7cc4c0 00000400 be6470f0 bf07de18 8015165c be59c010 8090453c 8090453c
de20:
bf07dec4 be6465a0 8014f614 80148884 0000619a 00000001 bf07c000 00000100
de40:
bf07de78 00000001 7f327850 00000002 afb50401 bf064980 bf07de9c bf07de68
de60:
bf064a00 803cc668 bf064a00 be6470b4 be6470b8 80844180 00000000 bf07de98
de80:
8092d940 bf07c000 bf07dec4 bf07de98 80124d18 7f1d1c44 80124c94 00000000
dea0:
00000006 80902098 80902080 40000006 00000100 bf07c000 bf07df24 bf07dec8
dec0:
8012501c 80124ca0 bf7cc4c0 bf064980 be95e1c0 04208040 80902d00 000061c7
dee0:
0000000a 80600b54 8092d940 808441f8 80902080 bf07dec8 bf03b200 bf07c000
df00:
bf03b200 8090fe54 00000000 00000000 00000000 00000000 bf07df34 bf07df28
df20:
80125148 80124f28 bf07df5c bf07df38 8013deb4 8012511c 00000000 bf03b240
df40:
bf03b200 8013dc90 00000000 00000000 bf07dfac bf07df60 8013ad40 8013dc9c
df60:
70448040 00000001 00000000 bf03b200 00000000 00030003 bf07df78 bf07df78
df80:
00000000 00000000 bf07df88 bf07df88 bf03b240 8013ac48 00000000 00000000
dfa0:
00000000 bf07dfb0 80107760 8013ac54 00000000 00000000 00000000 00000000
dfc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0:
00000000 00000000 00000000 00000000 00000013 00000000 8c120004 1190ad04
Backtrace:
[<
8018bcd4>] (relay_buf_full) from [<
7f1aa604>] (_674+0x740/0xf10 [ath9k])
[<
7f1aa550>] (_674 [ath9k]) from [<
7f1cf800>] (_582+0x14b4/0x3708 [ath9k])
r10:
be6415a0 r9:
be6465a0 r8:
be59c010 r7:
bddf0200 r6:
be6485a0 r5:
be94f5e8
r4:
00000030
[<
7f1cf1f0>] (_582 [ath9k]) from [<
7f1d1ed8>] (_735+0x2a0/0xec4 [ath9k])
r10:
be6415a0 r9:
8092d940 r8:
bf07de98 r7:
00000000 r6:
be6470f0 r5:
be6470ec
r4:
00000002
[<
7f1d1c38>] (_735 [ath9k]) from [<
80124d18>] (tasklet_action+0x84/0xf8)
r10:
bf07c000 r9:
8092d940 r8:
bf07de98 r7:
00000000 r6:
80844180 r5:
be6470b8
r4:
be6470b4
[<
80124c94>] (tasklet_action) from [<
8012501c>] (__do_softirq+0x100/0x1f4)
r10:
bf07c000 r9:
00000100 r8:
40000006 r7:
80902080 r6:
80902098 r5:
00000006
r4:
00000000 r3:
80124c94
[<
80124f1c>] (__do_softirq) from [<
80125148>] (run_ksoftirqd+0x38/0x4c)
r10:
00000000 r9:
00000000 r8:
00000000 r7:
00000000 r6:
8090fe54 r5:
bf03b200
r4:
bf07c000
[<
80125110>] (run_ksoftirqd) from [<
8013deb4>] (smpboot_thread_fn+0x224/0x260)
[<
8013dc90>] (smpboot_thread_fn) from [<
8013ad40>] (kthread+0xf8/0x100)
r9:
00000000 r8:
00000000 r7:
8013dc90 r6:
bf03b200 r5:
bf03b240 r4:
00000000
[<
8013ac48>] (kthread) from [<
80107760>] (ret_from_fork+0x14/0x34)
r7:
00000000 r6:
00000000 r5:
8013ac48 r4:
bf03b240
Code:
e89da800 e1a0c00d e92dd800 e24cb004 (
e5901014)
---[ end trace
dddf11ac9111b272 ]---
Kernel panic - not syncing: Fatal exception in interrupt
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: P D 4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<
8010a708>] (dump_backtrace) from [<
8010a99c>] (show_stack+0x18/0x1c)
r7:
bf093f58 r6:
20000193 r5:
809168e8 r4:
00000000
[<
8010a984>] (show_stack) from [<
802a09c4>] (dump_stack+0x94/0xa8)
[<
802a0930>] (dump_stack) from [<
8010d184>] (handle_IPI+0xe8/0x180)
r7:
bf093f58 r6:
00000000 r5:
00000001 r4:
808478c4
[<
8010d09c>] (handle_IPI) from [<
801013e8>] (gic_handle_irq+0x78/0x7c)
r7:
f4000100 r6:
bf093f58 r5:
f400010c r4:
8090467c
[<
80101370>] (gic_handle_irq) from [<
8010b378>] (__irq_svc+0x58/0x8c)
Exception stack(0xbf093f58 to 0xbf093fa0)
3f40:
bf7d62a0 00000000
3f60:
0010a5f4 80113460 bf092000 809043e4 00000002 80904434 bf092008 412fc09a
3f80:
00000000 bf093fb4 bf093fb8 bf093fa8 8010804c 80108050 60000013 ffffffff
r9:
bf092000 r8:
bf092008 r7:
bf093f8c r6:
ffffffff r5:
60000013 r4:
80108050
[<
80108014>] (arch_cpu_idle) from [<
80553c2c>] (default_idle_call+0x30/0x34)
[<
80553bfc>] (default_idle_call) from [<
80158394>] (cpu_startup_entry+0xc4/0xfc)
[<
801582d0>] (cpu_startup_entry) from [<
8010ce40>] (secondary_start_kernel+0x168/0x174)
r7:
8092d2f8 r4:
80913568
[<
8010ccd8>] (secondary_start_kernel) from [<
10101488>] (0x10101488)
r5:
00000055 r4:
4f07806a
Rebooting in 10 seconds..
Reboot failed -- System halted
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Karthikeyan Periyasamy [Mon, 12 Mar 2018 11:39:40 +0000 (17:09 +0530)]
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
When attempt to run worker (ath10k_sta_rc_update_wk) after the station object
(ieee80211_sta) delete will trigger the kernel panic.
This problem arise in AP + Mesh configuration, Where the current node AP VAP
and neighbor node mesh VAP MAC address are same. When the current mesh node
try to establish the mesh link with neighbor node, driver peer creation for
the neighbor mesh node fails due to duplication MAC address. Already the AP
VAP created with same MAC address.
It is caused by the following scenario steps.
Steps:
1. In above condition, ath10k driver sta_state callback (ath10k_sta_state)
fails to do the state change for a station from IEEE80211_STA_NOTEXIST
to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is
called from ieee80211_add_station() to handle the new station
(neighbor mesh node) request from the wpa_supplicant.
2. Concurrently ath10k receive the sta_rc_update callback notification from
the mesh_neighbour_update() to handle the beacon frames of the above
neighbor mesh node. since its atomic callback, ath10k driver queue the
work (ath10k_sta_rc_update_wk) to handle rc update.
3. Due to driver sta_state callback fails (step 1), mac80211 free the station
object.
4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access
the station object which is already deleted. so it will trigger kernel
panic.
Added the peer exist check in sta_rc_update callback before queue the work.
Kernel Panic log:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
c0204000
[
00000000] *pgd=
00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1
task:
dcef0000 ti:
d72b6000 task.ti:
d72b6000
PC is at pwq_activate_delayed_work+0x10/0x40
LR is at pwq_activate_delayed_work+0xc/0x40
pc : [<
c023f988>] lr : [<
c023f984>] psr:
40000193
sp :
d72b7f18 ip :
0000007a fp :
d72b6000
r10:
00000000 r9 :
dd404414 r8 :
d8c31998
r7 :
d72b6038 r6 :
00000004 r5 :
d4907ec8 r4 :
dcee1300
r3 :
ffffffe0 r2 :
00000000 r1 :
00000001 r0 :
00000000
Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
10c5787d Table:
595bc06a DAC:
00000015
...
Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238)
Stack: (0xd72b7f18 to 0xd72b8000)
7f00:
00000001 dcee1300
7f20:
00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089
7f40:
00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000
7f60:
00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000
7f80:
d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340
7fa0:
c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000
7fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fe0:
00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<
c023f988>] (pwq_activate_delayed_work) from [<
c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4)
[<
c02410dc>] (pwq_dec_nr_in_flight) from [<
c0242790>] (worker_thread+0x228/0x360)
[<
c0242790>] (worker_thread) from [<
c02474dc>] (kthread+0xd8/0xec)
[<
c02474dc>] (kthread) from [<
c0208d20>] (ret_from_fork+0x14/0x34)
Code:
e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs
Rebooting in 3 seconds..
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Carl Huang [Mon, 5 Mar 2018 06:44:02 +0000 (14:44 +0800)]
ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowait
The skb may be freed in tx completion context before
trace_ath10k_wmi_cmd is called. This can be easily captured when
KASAN(Kernel Address Sanitizer) is enabled. The fix is to move
trace_ath10k_wmi_cmd before the send operation. As the ret has no
meaning in trace_ath10k_wmi_cmd then, so remove this parameter too.
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ramon Fried [Wed, 14 Mar 2018 10:14:11 +0000 (12:14 +0200)]
wcn36xx: reduce verbosity of drivers messages
Whenever the WLAN interface is started the FW
version and caps are printed.
The caps now will be displayed only in debug mode.
Firmware version will be displayed only once on first
startup of the interface.
Change-Id: I4db6ea7f384fe15eebe4c3ddb1d1ccab00094332
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Sriram R [Wed, 14 Mar 2018 10:14:10 +0000 (12:14 +0200)]
ath: fix false radar detection in JP region
This fixes false radar detection (of radar type 7)
in Japan region by correcting the radar pulse type
to Chirp as per specification.
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Maharaja Kennadyrajan [Wed, 14 Mar 2018 10:14:08 +0000 (12:14 +0200)]
ath10k: debugfs support to get final TPC stats for 10.4 variants
Export the final Transmit Power Control (TPC) value, which is the
minimum of control power and existing TPC value to user space via
a new debugfs file "tpc_stats_final" to help with debugging.
It works with the new wmi cmd and event introduced in 10.4 firmware
branch.
WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID
WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID
cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final
$ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final
TPC config for channel 5180 mode 10
CTL = 0x 0 Reg. Domain = 58
Antenna Gain = 0 Reg. Max Antenna Gain = 0
Power Limit = 60 Reg. Max Power = 60
Num tx chains = 2 Num supported rates = 109
******************* CDD POWER TABLE ****************
No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3
0 CCK 0x40 0 0
1 CCK 0x41 0 0
[...]
107 HTCUP 0x 0 46 46
108 HTCUP 0x 0 46 46
******************* STBC POWER TABLE ****************
No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3
0 CCK 0x40 0 0
1 CCK 0x41 0 0
[...]
107 HTCUP 0x 0 46 46
108 HTCUP 0x 0 46 46
***********************************
TXBF not supported
**********************************
The existing tpc_stats debugfs file provides the dump
which is minimum of target power and regulatory domain.
cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats
Hardware_used: QCA4019
Firmware version: firmware-5.bin_10.4-3.0-00209
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Vasanthakumar Thiagarajan [Wed, 14 Mar 2018 10:14:06 +0000 (12:14 +0200)]
ath10k: add sta rx packet stats per tid
Added per tid sta counters for the following
- Total number MSDUs received from firmware
- Number of MSDUs received with errors like decryption, crc, mic ,etc.
- Number of MSDUs dropped in the driver
- A-MPDU/A-MSDU subframe stats
- Number of MSDUS passed to mac80211
All stats other than A-MPDU stats are only for received data frames.
A-MPDU stats might have stats for management frames when monitor
interface is active where management frames are notified both in wmi
and HTT interfaces.
These per tid stats can be enabled with tid bitmask through a debugfs
like below
echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask
tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames
The stats are read from
/sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats
Sample output:
To enable rx stats for tid 0, 5 and 6,
echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask
cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats
Driver Rx pkt stats per tid, ([tid] count)
------------------------------------------
MSDUs from FW [00] 2567 [05] 3178 [06] 1089
MSDUs unchained [00] 0 [05] 0 [06] 0
MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0
MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0
MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089
MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2
MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0
MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0
MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0
A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087
A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0
A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0
A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0
A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0
A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0
A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0
A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089
A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0
A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0
A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0
A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
David S. Miller [Mon, 26 Mar 2018 01:27:38 +0000 (21:27 -0400)]
Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.17
The biggest changes are the bluetooth related patches to the rsi
driver. It adds a new bluetooth driver which communicates directly
with the wireless driver and the interface is defined in
include/net/rsi_91x.h.
Major changes:
wl1251
* read the MAC address from the NVS file
rtlwifi
* enable mac80211 fast-tx support
mt76
* add capability to select tx/rx antennas
mt7601
* let mac80211 validate rx CCMP Packet Number (PN)
rsi
* bluetooth: add new btrsi driver
* btcoex support with the new btrsi driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kbuild test robot [Fri, 23 Mar 2018 19:47:42 +0000 (03:47 +0800)]
tipc: tipc_disc_addr_trial_msg() can be static
Fixes:
25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Jon Maloy jon.maloy@ericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 23 Mar 2018 11:36:15 +0000 (14:36 +0300)]
ibmvnic: Potential NULL dereference in clean_one_tx_pool()
There is an && vs || typo here, which potentially leads to a NULL
dereference.
Fixes:
e9e1e97884b7 ("ibmvnic: Update TX pool cleaning routine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Fri, 23 Mar 2018 11:35:49 +0000 (17:05 +0530)]
cxgb4: support new ISSI flash parts
Add support for new 32MB and 64MB ISSI (Integrated Silicon
Solution, Inc.) FLASH parts.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Fri, 23 Mar 2018 11:33:10 +0000 (17:03 +0530)]
cxgb4: depend on firmware event for link status
Depend on the firmware sending us link status changes,
rather than assuming that the link goes down upon L1
configuration.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Fri, 23 Mar 2018 10:18:46 +0000 (15:48 +0530)]
cxgb4: copy vlan_id in ndo_get_vf_config
Copy vlan_id to get it displayed in vf info.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudhar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Fri, 23 Mar 2018 09:55:10 +0000 (15:25 +0530)]
cxgb4: Setup FW queues before registering netdev
When NetworkManager is enabled, there are chances that interface up
is called even before probe completes. This means we have not yet
allocated the FW sge queues, hence rest of ingress queue allocation
wont be proper. Fix this by calling setup_fw_sge_queues() before
register_netdev().
Fixes:
0fbc81b3ad51 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's')
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 26 Mar 2018 00:48:26 +0000 (20:48 -0400)]
Merge branch 'broadcom-Adaptive-interrupt-coalescing'
Florian Fainelli says:
====================
net: broadcom: Adaptive interrupt coalescing
This patch series adds adaptive interrupt coalescing for the Gigabit Ethernet
drivers SYSTEMPORT and GENET.
This really helps lower the interrupt count and system load, as measured by
vmstat for a Gigabit TCP RX session:
SYSTEMPORT:
without:
1 0 0 192188 0 25472 0 0 0 0 122100 38870 1 42 57 0 0
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 1.03 GBytes 884 Mbits/sec
with:
1 0 0 192288 0 25468 0 0 0 0 58806 44401 0 100 0 0 0
[ 5] 0.0-10.0 sec 1.04 GBytes 888 Mbits/sec
GENET:
without:
1 0 0
1170404 0 25420 0 0 0 0 130785 63402 2 85 12 0 0
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 1.04 GBytes 888 Mbits/sec
with:
1 0 0
1170560 0 25420 0 0 0 0 50610 48477 0 100 0 0 0
[ 5] 0.0-10.0 sec 1.05 GBytes 899 Mbits/sec
Please look at the implementation and let me know if you see any problems, this
was largely inspired by bnxt_en.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 23 Mar 2018 01:19:33 +0000 (18:19 -0700)]
net: bcmgenet: Add support for adaptive RX coalescing
Unlike the moder modern SYSTEMPORT hardware, we do not have a
configurable TDMA timeout, which limits us to implement adaptive RX
interrupt coalescing only. We have each of our RX rings implement a
bcmgenet_net_dim structure which holds an interrupt counter, number of
packets, bytes, and a container for a net_dim instance.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 23 Mar 2018 01:19:32 +0000 (18:19 -0700)]
net: systemport: Implement adaptive interrupt coalescing
Implement support for adaptive RX and TX interrupt coalescing using
net_dim. We have each of our TX ring and our single RX ring implement a
bcm_sysport_net_dim structure which holds an interrupt counter, number
of packets, bytes, and a container for a net_dim instance.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 26 Mar 2018 00:43:42 +0000 (20:43 -0400)]
Merge branch 'mv88e6xxx-module-reloading'
Andrew Lunn says:
====================
Fixes to allow mv88e6xxx module to be reloaded
As reported by Uwe Kleine-König, the interrupt trigger is first
configured by DT and then reconfigured to edge. This results in a
failure on EPROBE_DEFER, or if the module is unloaded and reloaded.
A second crash happens on module reload due to a missing call to the
common IRQ free code when using polled interrupts.
With these fixes in place, it becomes possible to load and unload the
kernel modules a few times without it crashing.
v2: Fix the ü in Künig a couple of times
v3: But the ü should be an ö!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 25 Mar 2018 21:43:15 +0000 (23:43 +0200)]
net: dsa: mv88e6xxx: Call the common IRQ free code
When free'ing the polled IRQs, call the common irq free code.
Otherwise the interrupts are left registered, and when we come to load
the driver a second time, we get an Opps.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 25 Mar 2018 21:43:14 +0000 (23:43 +0200)]
net: dsa: mv88e6xxx: Use the DT IRQ trigger mode
By calling request_threaded_irq() with the flag IRQF_TRIGGER_FALLING
we override the trigger mode provided in device tree. And the
interrupt is actually active low, which is what all the current device
tree descriptions use.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak [Sun, 25 Mar 2018 21:20:06 +0000 (17:20 -0400)]
tc-testing: updated police, mirred, skbedit and skbmod with more tests
Added extra test cases for control actions (reclassify, pipe etc.),
cookies, max index value and police args sanity check.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 25 Mar 2018 21:07:41 +0000 (17:07 -0400)]
Merge branch 'hv_netvsc-Fix-improve-RX-path-error-handling'
Haiyang Zhang says:
====================
hv_netvsc: Fix/improve RX path error handling
Fix the status code returned to the host. Also add range
check for rx packet offset and length.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 22 Mar 2018 19:01:14 +0000 (12:01 -0700)]
hv_netvsc: Add range checking for rx packet offset and length
This patch adds range checking for rx packet offset and length.
It may only happen if there is a host side bug.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 22 Mar 2018 19:01:13 +0000 (12:01 -0700)]
hv_netvsc: Fix the return status in RX path
As defined in hyperv_net.h, the NVSP_STAT_SUCCESS is one not zero.
Some functions returns 0 when it actually means NVSP_STAT_SUCCESS.
This patch fixes them.
In netvsc_receive(), it puts the last RNDIS packet's receive status
for all packets in a vmxferpage which may contain multiple RNDIS
packets.
This patch puts NVSP_STAT_FAIL in the receive completion if one of
the packets in a vmxferpage fails.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 25 Mar 2018 20:46:05 +0000 (16:46 -0400)]
Merge branch 'net-permit-skb_segment-on-head_frag-frag_list-skb'
Yonghong Song says:
====================
net: permit skb_segment on head_frag frag_list skb
One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.
...
3665 while (pos < offset + len) {
3666 if (i >= nfrags) {
3667 BUG_ON(skb_headlen(list_skb));
...
The triggering input skb has the following properties:
list_skb = skb->frag_list;
skb->nfrags != NULL && skb_headlen(list_skb) != 0
and skb_segment() is not able to handle a frag_list skb
if its headlen (list_skb->len - list_skb->data_len) is not 0.
Patch #1 provides a simple solution to avoid BUG_ON. If
list_skb->head_frag is true, its page-backed frag will
be processed before the list_skb->frags.
Patch #2 provides a test case in test_bpf module which
constructs a skb and calls skb_segment() directly. The test
case is able to trigger the BUG_ON without Patch #1.
The patch has been tested in the following setup:
ipv6_host <-> nat_server <-> ipv4_host
where nat_server has a bpf program doing ipv4<->ipv6
translation and forwarding through clsact hook
bpf_skb_change_proto.
Changelog:
v5 -> v6:
. Added back missed BUG_ON(!nfrags) for zero
skb_headlen(skb) case, plus a couple of
cosmetic changes, from Alexander.
v4 -> v5:
. Replace local variable head_frag with
a static inline function skb_head_frag_to_page_desc
which gets the head_frag on-demand. This makes
code more readable and also does not increase
the stack size, from Alexander.
. Remove the "if(nfrags)" guard for skb_orphan_frags
and skb_zerocopy_clone as I found that they can
handle zero-frag skb (with non-zero skb_headlen(skb))
properly.
. Properly release segment list from skb_segment()
in the test, from Eric.
v3 -> v4:
. Remove dynamic memory allocation and use rewinding
for both index and frag to remove one branch in fast path,
from Alexander.
. Fix a bunch of issues in test_bpf skb_segment() test,
including proper way to allocate skb, proper function
argument for skb_add_rx_frag and not freeint skb, etc.,
from Eric.
v2 -> v3:
. Use starting frag index -1 (instead of 0) to
special process head_frag before other frags in the skb,
from Alexander Duyck.
v1 -> v2:
. Removed never-hit BUG_ON, spotted by Linyu Yuan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Wed, 21 Mar 2018 23:31:04 +0000 (16:31 -0700)]
net: bpf: add a test for skb_segment in test_bpf module
Without the previous commit,
"modprobe test_bpf" will have the following errors:
...
[ 98.149165] ------------[ cut here ]------------
[ 98.159362] kernel BUG at net/core/skbuff.c:3667!
[ 98.169756] invalid opcode: 0000 [#1] SMP PTI
[ 98.179370] Modules linked in:
[ 98.179371] test_bpf(+)
...
which triggers the bug the previous commit intends to fix.
The skbs are constructed to mimic what mlx5 may generate.
The packet size/header may not mimic real cases in production. But
the processing flow is similar.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Wed, 21 Mar 2018 23:31:03 +0000 (16:31 -0700)]
net: permit skb_segment on head_frag frag_list skb
One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.
3472 struct sk_buff *skb_segment(struct sk_buff *head_skb,
3473 netdev_features_t features)
3474 {
3475 struct sk_buff *segs = NULL;
3476 struct sk_buff *tail = NULL;
...
3665 while (pos < offset + len) {
3666 if (i >= nfrags) {
3667 BUG_ON(skb_headlen(list_skb));
3668
3669 i = 0;
3670 nfrags = skb_shinfo(list_skb)->nr_frags;
3671 frag = skb_shinfo(list_skb)->frags;
3672 frag_skb = list_skb;
...
call stack:
...
#1 [
ffff883ffef03558] __crash_kexec at
ffffffff8110c525
#2 [
ffff883ffef03620] crash_kexec at
ffffffff8110d5cc
#3 [
ffff883ffef03640] oops_end at
ffffffff8101d7e7
#4 [
ffff883ffef03668] die at
ffffffff8101deb2
#5 [
ffff883ffef03698] do_trap at
ffffffff8101a700
#6 [
ffff883ffef036e8] do_error_trap at
ffffffff8101abfe
#7 [
ffff883ffef037a0] do_invalid_op at
ffffffff8101acd0
#8 [
ffff883ffef037b0] invalid_op at
ffffffff81a00bab
[exception RIP: skb_segment+3044]
RIP:
ffffffff817e4dd4 RSP:
ffff883ffef03860 RFLAGS:
00010216
RAX:
0000000000002bf6 RBX:
ffff883feb7aaa00 RCX:
0000000000000011
RDX:
ffff883fb87910c0 RSI:
0000000000000011 RDI:
ffff883feb7ab500
RBP:
ffff883ffef03928 R8:
0000000000002ce2 R9:
00000000000027da
R10:
000001ea00000000 R11:
0000000000002d82 R12:
ffff883f90a1ee80
R13:
ffff883fb8791120 R14:
ffff883feb7abc00 R15:
0000000000002ce2
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#9 [
ffff883ffef03930] tcp_gso_segment at
ffffffff818713e7
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 25 Mar 2018 20:24:34 +0000 (16:24 -0400)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2018-03-23
This series contains updates to ixgbe and ixgbevf only.
Paul adds status register reads to reduce a potential race condition
where registers can read 0xFFFFFFFF during a PCI reset, which in turn
causes the driver to remove the adapter. Then fixes an assignment
operation with an "OR" operation.
Shannon Nelson provides several IPsec offload cleanups to ixgbe, as well as a
patch to enable TSO with IPsec offload.
Tony provides the much anticipated XDP support for ixgbevf. Currently,
pass, drop and XDP_TX actions are supported, as well as meta data and
stats reporting.
Björn Töpel tweaks the page counting for XDP_REDIRECT, since a page can
have its reference count decreased via the xdp_do_redirect() call.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 25 Mar 2018 20:18:55 +0000 (16:18 -0400)]
Merge branch 'liquidio-Tx-queue-cleanup'
Intiyaz Basha says:
====================
liquidio: Tx queue cleanup
Moved some common function to octeon_network.h
Removed some unwanted functions and checks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:44 +0000 (17:37 -0700)]
liquidio: Renamed txqs_start to start_txqs
For consistency renaming txqs_start to start_txqs
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:41 +0000 (17:37 -0700)]
liquidio: Renamed txqs_stop to stop_txqs
For consistency renaming txqs_stop to stop_txqs
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:39 +0000 (17:37 -0700)]
liquidio: Renamed txqs_wake to wake_txqs
For consistency renaming txqs_wake to wake_txqs
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:36 +0000 (17:37 -0700)]
liquidio: Function call skb_iq for deriving queue from skb
Using skb_iq function for deriving queue from skb
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:33 +0000 (17:37 -0700)]
liquidio: Removed one line function wake_q
Removing one line function wake_q
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:30 +0000 (17:37 -0700)]
liquidio: Removed one line function stop_q
Removing one line function stop_q
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:28 +0000 (17:37 -0700)]
liquidio: Removed netif_is_multiqueue check
Removing checks for netif_is_multiqueue.
Configuring single queue will be a multiqueue netdev with one queues.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:25 +0000 (17:37 -0700)]
liquidio: Removed start_txq function
Removing start_txq function from VF and PF files
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:20 +0000 (17:37 -0700)]
liquidio: Removed one line function stop_txq
Removing one line function stop_txq
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:17 +0000 (17:37 -0700)]
liquidio: Moved common function skb_iq to to octeon_network.h
Moving common function skb_iq to to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:07 +0000 (17:37 -0700)]
liquidio: Moved common function txqs_start to octeon_network.h
Moving common function txqs_start to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:36:58 +0000 (17:36 -0700)]
liquidio: Moved common function txqs_wake to octeon_network.h
Moving common function txqs_wake to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:36:56 +0000 (17:36 -0700)]
liquidio: Moved common function txqs_stop to octeon_network.h
Moving common function txqs_stop to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Fri, 23 Mar 2018 18:31:30 +0000 (19:31 +0100)]
net/sched: act_vlan: declare push_vid with host byte order
use u16 in place of __be16 to suppress the following sparse warnings:
net/sched/act_vlan.c:150:26: warning: incorrect type in assignment (different base types)
net/sched/act_vlan.c:150:26: expected restricted __be16 [usertype] push_vid
net/sched/act_vlan.c:150:26: got unsigned short
net/sched/act_vlan.c:151:21: warning: restricted __be16 degrades to integer
net/sched/act_vlan.c:208:26: warning: incorrect type in assignment (different base types)
net/sched/act_vlan.c:208:26: expected unsigned short [unsigned] [usertype] tcfv_push_vid
net/sched/act_vlan.c:208:26: got restricted __be16 [usertype] push_vid
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Fri, 23 Mar 2018 18:09:39 +0000 (19:09 +0100)]
net/sched: remove tcf_idr_cleanup()
tcf_idr_cleanup() is no more used, so remove it.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 23 Mar 2018 18:03:58 +0000 (21:03 +0300)]
mlxsw: spectrum_span: Prevent duplicate mirrors
In net commit
8175f7c4736f ("mlxsw: spectrum: Prevent duplicate
mirrors") we prevented the user from mirroring more than once from a
single binding point (port-direction pair).
The fix was essentially reverted in a merge conflict resolution when net
was merged into net-next. Restore it.
Fixes:
03fe2debbb27 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Björn Töpel [Thu, 22 Mar 2018 09:02:36 +0000 (10:02 +0100)]
ixgbe: tweak page counting for XDP_REDIRECT
The current page counting scheme assumes that the reference count
cannot decrease until the received frame is sent to the upper layers
of the networking stack. This assumption does not hold for the
XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have
its reference count decreased via the xdp_do_redirect call.
To work around that, we now start off by a large page count and then
don't allow a refcount less than two.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Fri, 16 Mar 2018 22:34:06 +0000 (15:34 -0700)]
ixgbevf: Add XDP queue stats reporting
XDP stats are included in TX stats, however, they are not
reported in TX queue stats since they are setup on different
queues. Add reporting for XDP queue stats to provide
consistency between the total stats and per queue stats.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>