OSDN Git Service
Richard Henderson [Fri, 12 May 2023 17:12:43 +0000 (18:12 +0100)]
tcg/i386: Set P_REXW in tcg_out_addi_ptr
The REXW bit must be set to produce a 64-bit pointer result; the
bit is disabled in 32-bit mode, so we can do this unconditionally.
Fixes:
7d9e1ee424b0 ("tcg/i386: Adjust assert in tcg_out_addi_ptr")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1592
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1642
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 16 May 2023 17:21:44 +0000 (10:21 -0700)]
Merge tag 'pull-9p-
20230516' of https://github.com/cschoenebeck/qemu into staging
9pfs: fixes
* Fixes for Xen, configure and a theoretical leak.
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmRjn00XHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5WsMQ/8CxhjMyFDRR+tkQyR0Cp17Wt3
# gspnxW01ieS/J5TKmeGPLqF8OG6HKCmK47jo/ADrxs2wgBIt8UvvH/F1Dkt5F2L3
# xxTQws6TXqdk2nuCAeNgAePlindhJpkiqjAupjrAsy/b4O1OqI42obGGdE4XEYDh
# XyHkQACoOj70MlN+sZ7B2FtNkLaQePOs07wzvD8OyBfjHBhfqLxg67ZcYXkKYaTq
# 4zaiZKSeGvMT9pMLgXmMscwQvs1Mk6RhmQPraYSbGuDcR4vHZquJY4brVpseGBPT
# ZhF/5YjAp6iRa13B9nnSk1/RlqEQPQ9Z4HDkDmtUY7as3GVC88n1N4mUzvrjrDgL
# 3v8Kr6QmjLxmjfuxdP1KhvrjhYqXdIwZ02TARQBUSEPS0GbJoNqkdzl4OsbvC7o9
# toGbgyg+H/6yBzPjT22za61M1vjkWfDc1JDmowgNy1QRSOSuYjRRGl1AiwsGrfU6
# BaV7N7sSGS03/1er1U9e47dNkC0wNrbT/KBBwqWFx/Mz2NLU7CK61hONOmEAy+nu
# Jn4xhWxQFxgRpRNJBY+e1sNy0rXztDStvM1o4qdeKL3l+N8egTeEStFjepLQ3tMK
# Jdqxw6W/jTyaEcz/IvUuId1eCKLaxBl/xmEVPx6/N2fh5gkWD+4ldUq1G/RW1KvP
# /rGR1Jbxs2jxhdPh13Y=
# =p8Bg
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 16 May 2023 08:20:45 AM PDT
# gpg: using RSA key
96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-
20230516' of https://github.com/cschoenebeck/qemu:
configure: make clear that VirtFS is 9p
9pfs/xen: Fix segfault on shutdown
tests/9p: fix potential leak in v9fs_rreaddir()
Don't require libcap-ng for virtfs support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Christian Schoenebeck [Thu, 11 May 2023 14:12:34 +0000 (16:12 +0200)]
configure: make clear that VirtFS is 9p
Add '9P' to the summary output section of 'VirtFS' to avoid being
confused with virtiofs.
Based-on: <
20230503130757.863824-1-pefoley@google.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <E1px7Id-0000NE-OQ@lizzy.crudebyte.com>
Jason Andryuk [Tue, 2 May 2023 14:37:22 +0000 (10:37 -0400)]
9pfs/xen: Fix segfault on shutdown
xen_9pfs_free can't use gnttabdev since it is already closed and NULL-ed
out when free is called. Do the teardown in _disconnect(). This
matches the setup done in _connect().
trace-events are also added for the XenDevOps functions.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <
20230502143722.15613-1-jandryuk@gmail.com>
[C.S.: - Remove redundant return in xen_9pfs_free().
- Add comment to trace-events. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Christian Schoenebeck [Sat, 29 Apr 2023 09:25:33 +0000 (11:25 +0200)]
tests/9p: fix potential leak in v9fs_rreaddir()
Free allocated directory entries in v9fs_rreaddir() if argument
`entries` was passed as NULL, to avoid a memory leak. It is
explicitly allowed by design for `entries` to be NULL. [1]
[1] https://lore.kernel.org/all/
1690923.g4PEXVpXuU@silver
Reported-by: Coverity (CID 1487558)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1psh5T-0002XN-1C@lizzy.crudebyte.com>
Peter Foley [Wed, 3 May 2023 13:07:56 +0000 (09:07 -0400)]
Don't require libcap-ng for virtfs support
It's only required for the proxy helper.
Add a new option for the proxy helper rather than enabling it
implicitly.
Change-Id: I95b73fca625529e99d16b0a64e01c65c0c1d43f2
Signed-off-by: Peter Foley <pefoley@google.com>
Message-Id: <
20230503130757.863824-1-pefoley@google.com>
[C.S.: - Resolve merge conflict. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Richard Henderson [Tue, 16 May 2023 13:24:33 +0000 (06:24 -0700)]
Merge tag 'pull-request-2023-05-15v2' of https://gitlab.com/thuth/qemu into staging
* Various small test updates
* Some small doc updates
* Introduce replacement for -async-teardown that shows up in the QAPI
* Make machine-qmp-cmds.c and xilinx_ethlite.c target-independent
* Fix s390x LDER instruction
* Fix s390x EXECUTE instruction with relative branches
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRjagURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVyPxAAhlqIbVWir264DQkpLKM/4CVWPxVPwBxh
# OPvSG42wM7+uCNefnIWYr4qT1+Iz14w8OYBCEON2u8Pwfgxrjf2ZkS2C79iL3FHG
# 37NsFGkxhLLeexzYyCpSg3FNikZql+RNg9I9um4NRPH0lgu4L3aQk58WyXFyBHU2
# mxvbAEOyiSbGr8bp6ZcU7k1UryRZ6qQoBUzFvMQpUD7jlo88MVUu5D+4xZclH6EV
# R6WerbyKUWnfY0rFWxA8RGt785aUVq9iD8tIkPkPhQ/UjvzZKosCHIpjF0qCkd6P
# 42Ahz6kP7Ce/XlTcS/Q3gIEzKViCFJtZiZIG/N2sBAWqisTkaSKDeQMrM6vAmmBr
# ju44CUk2tupZSG20G/Gz7a09ZKr3S7+6BpJ+tUdnK2W9PSU7CycesZ6s9hqKJL8W
# QUOMKyEMF/+W+pubdfYJNvUha6hYPoaR9vTNAhC50NiahhhIxIRcyRtpteVgsjwW
# lxHMeIz8PUHxp+tvl3CzLZyDWF0maq5/JzhkCoUhvzVUAh+tDYAfWOKxIxEVNPVt
# E1Igj6N4TYvkrXltSyxMxs9uHWhNi4ObETbB+7greYOWFVhtKhphnG78wt0uu81O
# iZIqdLzWFeqaH5/Li3VnuVhLDnhSfpDiWUNqaVvWu6V5WrXDuIGQoe7pxAhRvZTB
# zsOUpGdprPo=
# =sWOT
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 16 May 2023 04:33:25 AM PDT
# gpg: using RSA key
27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-05-15v2' of https://gitlab.com/thuth/qemu: (21 commits)
tests/tcg/s390x: Test EXECUTE of relative branches
target/s390x: Fix EXECUTE of relative branches
tests/tcg/s390x: Enable the multiarch system tests
tests/tcg/multiarch: Make the system memory test work on big-endian
s390x/tcg: Fix LDER instruction format
hw/net: Move xilinx_ethlite.c to the target-independent source set
hw/core: Move machine-qmp-cmds.c into the target independent source set
cpu: Introduce a wrapper for being able to use TARGET_NAME in common code
hw/core: Use a callback for target specific query-cpus-fast information
docs/about/emulation: fix typo
docs/devel: remind developers to run CI container pipeline when updating images
s390x/pv: Fix spurious warning with asynchronous teardown
util/async-teardown: wire up query-command-line-options
tests/lcitool: Add mtools and xorriso and remove genisoimage as dependencies
tests: libvirt-ci: Update to commit '
c8971e90ac' to pull in mformat and xorriso
Add information how to fix common build error on Windows in symlink-install-tree
hw/pci-bridge: Fix release ordering by embedding PCIBridgeWindows within PCIBridge
tests/qtest: replace qmp_discard_response with qtest_qmp_assert_success
net: stream: test reconnect option with an unix socket
sysemu/kvm: Remove unused headers
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ilya Leoshkevich [Wed, 26 Apr 2023 23:58:13 +0000 (01:58 +0200)]
tests/tcg/s390x: Test EXECUTE of relative branches
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20230426235813.198183-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ilya Leoshkevich [Wed, 26 Apr 2023 23:58:12 +0000 (01:58 +0200)]
target/s390x: Fix EXECUTE of relative branches
Fix a problem similar to the one fixed by commit
703d03a4aaf3
("target/s390x: Fix EXECUTE of relative long instructions"), but now
for relative branches.
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20230426235813.198183-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ilya Leoshkevich [Thu, 11 May 2023 11:46:51 +0000 (13:46 +0200)]
tests/tcg/s390x: Enable the multiarch system tests
Multiarch tests are written in C and need support for printing
characters. Instead of implementing the runtime from scratch, just
reuse the pc-bios/s390-ccw one.
Run tests with -nographic in order to enable SCLP (enable this for
the existing tests as well, since it does not hurt).
Use the default linker script for the new tests.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20230511114651.439872-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ilya Leoshkevich [Thu, 11 May 2023 11:46:50 +0000 (13:46 +0200)]
tests/tcg/multiarch: Make the system memory test work on big-endian
Store the bytes in descending order on big-endian.
Invert the logic in the multi-byte signed tests on big-endian.
Make the checks in the multi-byte signed tests stricter.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20230511114651.439872-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ilya Leoshkevich [Thu, 11 May 2023 13:47:26 +0000 (15:47 +0200)]
s390x/tcg: Fix LDER instruction format
It's RRE, not RXE.
Found by running valgrind's none/tests/s390x/bfp-2.
Fixes:
86b59624c4aa ("s390x/tcg: Implement LOAD LENGTHENED short HFP to long HFP")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <
20230511134726.469651-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 8 May 2023 12:03:14 +0000 (14:03 +0200)]
hw/net: Move xilinx_ethlite.c to the target-independent source set
Now that the tswap() functions are available for target-independent
code, too, we can move xilinx_ethlite.c from specific_ss to softmmu_ss
to avoid that we have to compile this file multiple times.
Message-Id: <
20230508120314.59274-1-thuth@redhat.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 24 Apr 2023 16:04:34 +0000 (18:04 +0200)]
hw/core: Move machine-qmp-cmds.c into the target independent source set
The only target specific code that is left in here are two spots that
use TARGET_NAME. Change them to use the new target_name() wrapper
function instead, so we can move the file into the common softmmu_ss
source set. That way we only have to compile this file once, and not
for each target anymore.
Message-Id: <
20230424160434.331175-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 24 Apr 2023 16:04:33 +0000 (18:04 +0200)]
cpu: Introduce a wrapper for being able to use TARGET_NAME in common code
In some spots, it would be helpful to be able to use TARGET_NAME
in common (target independent) code, too. Thus introduce a wrapper
that can be called from common code, too, just like we already
have one for target_words_bigendian().
Message-Id: <
20230424160434.331175-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 24 Apr 2023 16:04:32 +0000 (18:04 +0200)]
hw/core: Use a callback for target specific query-cpus-fast information
For being able to create a universal QEMU binary one day, core
files like machine-qmp-cmds.c must not contain any "#ifdef TARGET_..."
parts. Thus let's provide the target specific function via a
function pointer in CPUClass instead, as a first step towards
making this file target independent.
Message-Id: <
20230424160434.331175-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lizhi Yang [Thu, 11 May 2023 08:01:19 +0000 (16:01 +0800)]
docs/about/emulation: fix typo
Duplicated word "are".
Signed-off-by: Lizhi Yang <sledgeh4w@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230511080119.99018-1-sledgeh4w@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ani Sinha [Sat, 6 May 2023 07:20:12 +0000 (12:50 +0530)]
docs/devel: remind developers to run CI container pipeline when updating images
When new dependencies and packages are added to containers, its important to
run CI container generation pipelines on gitlab to make sure that there are no
obvious conflicts between packages that are being added and those that are
already present. Running CI container pipelines will make sure that there are
no such breakages before we commit the change updating the containers. Add a
line in the documentation reminding developers to run the pipeline before
submitting the change. It will also ease the life of the maintainers.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20230506072012.10350-1-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Claudio Imbrenda [Wed, 10 May 2023 10:55:31 +0000 (12:55 +0200)]
s390x/pv: Fix spurious warning with asynchronous teardown
Kernel commit
292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes:
c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <
20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Claudio Imbrenda [Fri, 5 May 2023 12:00:51 +0000 (14:00 +0200)]
util/async-teardown: wire up query-command-line-options
Add new -run-with option with an async-teardown=on|off parameter. It is
visible in the output of query-command-line-options QMP command, so it
can be discovered and used by libvirt.
The option -async-teardown is now redundant, deprecate it.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Fixes:
c891c24b1a ("os-posix: asynchronous teardown for shutdown on Linux")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <
20230505120051.36605-2-imbrenda@linux.ibm.com>
[thuth: Add curly braces to fix error with GCC 8.5, fix bug in deprecated.rst]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ani Sinha [Thu, 4 May 2023 15:46:11 +0000 (21:16 +0530)]
tests/lcitool: Add mtools and xorriso and remove genisoimage as dependencies
Bios bits avocado tests need mformat (provided by the mtools package) and
xorriso tools in order to run within gitlab CI containers. Add those
dependencies within the Dockerfiles so that containers can be built with
those tools present and bios bits avocado tests can be run there.
xorriso package conflicts with genisoimage package on some distributions.
Therefore, it is not possible to have both the packages at the same time
in the container image uniformly for all distribution flavors. Further,
on some distributions like RHEL, both xorriso and genisoimage
packages provide /usr/bin/genisoimage and on some other distributions like
Fedora, only genisoimage package provides the same utility.
Therefore, this change removes the dependency on geninsoimage for building
container images altogether keeping only xorriso package. At the same time,
cdrom-test.c is updated to use and check for existence of only xorrisofs.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <
20230504154611.85854-3-anisinha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ani Sinha [Thu, 4 May 2023 15:46:10 +0000 (21:16 +0530)]
tests: libvirt-ci: Update to commit '
c8971e90ac' to pull in mformat and xorriso
Pull in the following changes from lcitool:
* tests/lcitool/libvirt-ci
85487e1...
c8971e9 (18):
> mappings: add new package mappings for mformat and xorriso
> docs: testing: Update contents with tox
> .gitlab-ci.yml: Always test against installed lcitool
> gitlab-ci.yml: Start using tox for testing
> tox: Allow running with custom pytest options with {posargs}
> gitignore: Add the default .tox directory
> dev-requirements: Reference VM requirements
> requirements: Add tox to dev-requirements.txt and drop pytest and flake
> test-requirements: Rename to dev-requirements.txt
> Add tox.ini configuration file
> tests: commands: Consolidate the installed package/run from git tests
> Add a pytest.ini
> facts: targets: Drop Fedora 36 target
> gitlab-ci.yml: Add Fedora 38 target
> facts: targets: Add Fedora 38
> facts: mappings: Drop 'zstd' mapping
> facts: projects: nbdkit: Replace zstd mapping with libzstd
> docs: mappings: Add a section on the preferred mapping naming scheme
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <
20230504154611.85854-2-anisinha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mateusz Krawczuk [Thu, 4 May 2023 21:11:01 +0000 (23:11 +0200)]
Add information how to fix common build error on Windows in symlink-install-tree
By default, Windows doesn't allow to create soft links for user account
and only administrator is allowed to do this. To fix this problem you have
to raise your permissions or enable Developer Mode, which available since
Windows 10. Additional explanation when build fails will allow developer
to fix the problem on his computer faster.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1386
Signed-off-by: Mateusz Krawczuk <mat.krawczuk@gmail.com>
Message-Id: <
20230504211101.1386-1-mat.krawczuk@gmail.com>
[thuth: Drop the hunk with the white space changes]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Jonathan Cameron [Fri, 21 Apr 2023 12:25:50 +0000 (13:25 +0100)]
hw/pci-bridge: Fix release ordering by embedding PCIBridgeWindows within PCIBridge
The lifetime of the PCIBridgeWindows instance accessed via the windows pointer
in struct PCIBridge is managed separately from the PCIBridge itself.
Triggered by ./qemu-system-x86_64 -M x-remote -display none -monitor stdio
QEMU monitor: device_add cxl-downstream
In some error handling paths (such as the above due to attaching a cxl-downstream
port anything other than a cxl-upstream port) the g_free() of the PCIBridge
windows in pci_bridge_region_cleanup() is called before the final call of
flatview_uref() in address_space_set_flatview() ultimately from
drain_call_rcu()
At one stage this resulted in a crash, currently can still be observed using
valgrind which records a use after free.
When present, only one instance is allocated. pci_bridge_update_mappings()
can operate directly on an instance rather than creating a new one and
swapping it in. Thus there appears to be no reason to not directly
couple the lifetimes of the two structures by embedding the PCIBridgeWindows
within the PCIBridge removing the need for the problematic separate free.
Patch is same as was posted deep in the discussion.
https://lore.kernel.org/qemu-devel/
20230403171232.
000020bb@huawei.com/
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <
20230421122550.28234-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Fri, 21 Apr 2023 17:14:06 +0000 (18:14 +0100)]
tests/qtest: replace qmp_discard_response with qtest_qmp_assert_success
The qmp_discard_response method simply ignores the result of the QMP
command, merely unref'ing the object. This is a bad idea for tests
as it leaves no trace if the QMP command unexpectedly failed. The
qtest_qmp_assert_success method will validate that the QMP command
returned without error, and if errors occur, it will print a message
on the console aiding debugging.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20230421171411.566300-2-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Laurent Vivier [Wed, 3 May 2023 09:41:09 +0000 (11:41 +0200)]
net: stream: test reconnect option with an unix socket
We can have failure with the inet type test because the port address
is not allocated atomically and can be taken by another test between its
selection and the start of QEMU. To avoid that, use an unix socket with
a path that is unique
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <
20230503094109.
1198248-1-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Philippe Mathieu-Daudé [Wed, 5 Apr 2023 16:04:45 +0000 (18:04 +0200)]
sysemu/kvm: Remove unused headers
All types used are forward-declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230405160454.97436-2-philmd@linaro.org>
[thuth: Add hw/core/cpu.h to migration/dirtyrate.c to fix compile failure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 2 May 2023 10:57:21 +0000 (12:57 +0200)]
tests/avocado/virtio-gpu: Fix the URLs of the test_virtio_vga_virgl test
The URLs here are not valid anymore - looks like the assets got moved
into the pub/archive/ subfolder instead.
Message-Id: <
20230502105721.
1661930-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Richard Henderson [Mon, 15 May 2023 20:54:33 +0000 (13:54 -0700)]
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
# c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
# yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
# +wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
# QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
# R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
# CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
# =Q8xW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 09:04:56 AM PDT
# gpg: using RSA key
8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
docs/zoned-storage:add zoned emulation use case
virtio-blk: add some trace events for zoned emulation
block: add accounting for zone append operation
virtio-blk: add zoned storage emulation for zoned devices
block: add some trace events for zone append
qemu-iotests: test zone append operation
block: introduce zone append write for zoned devices
file-posix: add tracking of the zone write pointers
docs/zoned-storage: add zoned device documentation
block: add some trace events for new block layer APIs
iotests: test new zone operations
block: add zoned BlockDriver check to block layer
block/raw-format: add zone operations to pass through requests
block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
block/file-posix: introduce helper functions for sysfs attributes
block/block-common: add zoned device structs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 15 May 2023 18:33:39 +0000 (11:33 -0700)]
Merge tag 'migration-
20230515-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
20230515
Hi
On this PULL:
- use xxHash for calculate dirty_rate (andrei)
- Create qemu_target_pages_to_MiB() and use them (quintela)
- make dirtyrate target independent (quintela)
- Merge 5 patches from atomic counters series (quintela)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRiJoUACgkQ9IfvGFhy
# 1yO1ExAAsSStVAUh/tSgu5fhXydJVkBMO6LOj1k+tA7qylwv4QsqZ/pLNBvY8Zms
# 8/bpYtlvw1LwCSaq01oNA6RhBhkBaZ5x0PUViCY87dsJhu0hEo68Jcp0FkrkW93E
# OiIsp9NU7wpnqd88ZhzjcZ/viWebPw3660V5KY4/8ZZFVxJaKMhG+vW3pGYH8yDR
# TmZK5E5e3t5yiwDRRPrkAw3+e+GDwfwNuOBkk+NBJdL1mOZnIfVwFwxRAXWn/vEM
# f6NdT3aXplsNeKPCN1w9zrLhOJdHeu8IlhWhT/cjTgOKemBJBYzftH6dI/X9D0ix
# ghWAzFSJh1S38gw0mMef1VERJqh7JpAkTq7vT2x7J/0UIbIAru0yRiSrHbNBCcvL
# efsVFtjyseKq70qKN515uoqbK6mlnxP+eECIAUmesUx0bJI9jDWzn+KVc86xUvWy
# +98KDcPuYVxdVp4XHAIsyHYOfTY/tJwG5KI4hYgGP7uxFVr/qus3eBB/Q5BBVPOx
# X0A/760iehfV0V0UmVEt8mC7uDjI0JBouenUHcURAtbsnuGRMCz6s1kLsZYaHuGV
# NhihXq6jnwcvn2nGGnXY44TsgBWesfUrCFZOjJzbaSjGH5UpipC0SECKqh1GKoQP
# kdknvyej5h8egU2QFdS8sCUeXIfwAtHfCamtnui3b3E3iF3TSco=
# =8gfA
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 05:33:09 AM PDT
# gpg: using RSA key
1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-
20230515-pull-request' of https://gitlab.com/juan.quintela/qemu:
qemu-file: Remove total from qemu_file_total_transferred_*()
qemu-file: Make rate_limit_used an uint64_t
qemu-file: make qemu_file_[sg]et_rate_limit() use an uint64_t
migration: We set the rate_limit by a second
migration: A rate limit value of 0 is valid
migration: Make dirtyrate.c target independent
migration: Teach dirtyrate about qemu_target_page_bits()
migration: Teach dirtyrate about qemu_target_page_size()
Use new created qemu_target_pages_to_MiB()
softmmu: Create qemu_target_pages_to_MiB()
migration/calc-dirty-rate: replaced CRC32 with xxHash
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 15 May 2023 13:55:57 +0000 (06:55 -0700)]
Merge tag 'pull-loongarch-
20230515' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-
20230515
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZGIThgAKCRBAov/yOSY+
# 34NVA/0b99XxYeeOnJYspjKGgVk+R51+1ilMHqPGlNEG6HB2eHyIJdDgenBDaa/h
# lxqzDU9YQI4DzuvUcC75uWrShMkR5/Fb8Z0CCEToQUyAwfh2pNeAIzuB7TXHW5Ox
# SRGMs3eF23q5BUSCeD7DS2Ar1Zv4Gm3ytutiMAvCxNzxJWF1aA==
# =g93p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 04:12:06 AM PDT
# gpg: using RSA key
B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-
20230515' of https://gitlab.com/gaosong/qemu:
hw/intc: Add NULL pointer check on LoongArch ipi device
hw/loongarch/virt: Set max 256 cpus support on loongarch virt machine
hw/loongarch/virt: Modify ipi as percpu device
tests/avocado: Add LoongArch machine start test
loongarch: mark loongarch_ipi_iocsr re-entrnacy safe
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sam Li [Mon, 8 May 2023 05:19:16 +0000 (13:19 +0800)]
docs/zoned-storage:add zoned emulation use case
Add the documentation about the example of using virtio-blk driver
to pass the zoned block devices through to the guest.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id:
20230508051916.178322-5-faithilikerun@gmail.com
[Fix pre-formatted code syntax
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 05:19:15 +0000 (13:19 +0800)]
virtio-blk: add some trace events for zoned emulation
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508051916.178322-4-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 05:19:14 +0000 (13:19 +0800)]
block: add accounting for zone append operation
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id:
20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 05:19:13 +0000 (13:19 +0800)]
virtio-blk: add zoned storage emulation for zoned devices
This patch extends virtio-blk emulation to handle zoned device commands
by calling the new block layer APIs to perform zoned device I/O on
behalf of the guest. It supports Report Zone, four zone oparations (open,
close, finish, reset), and Append Zone.
The VIRTIO_BLK_F_ZONED feature bit will only be set if the host does
support zoned block devices. Regular block devices(conventional zones)
will not be set.
The guest os can use blktests, fio to test those commands on zoned devices.
Furthermore, using zonefs to test zone append write is also supported.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id:
20230508051916.178322-2-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 05:15:10 +0000 (13:15 +0800)]
block: add some trace events for zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508051510.177850-5-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 05:15:09 +0000 (13:15 +0800)]
qemu-iotests: test zone append operation
The patch tests zone append writes by reporting the zone wp after
the completion of the call. "zap -p" option can print the sector
offset value after completion, which should be the start sector
where the append write begins.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508051510.177850-4-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 05:15:08 +0000 (13:15 +0800)]
block: introduce zone append write for zoned devices
A zone append command is a write operation that specifies the first
logical block of a zone as the write position. When writing to a zoned
block device using zone append, the byte offset of the call may point at
any position within the zone to which the data is being appended. Upon
completion the device will respond with the position where the data has
been written in the zone.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508051510.177850-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 05:15:07 +0000 (13:15 +0800)]
file-posix: add tracking of the zone write pointers
Since Linux doesn't have a user API to issue zone append operations to
zoned devices from user space, the file-posix driver is modified to add
zone append emulation using regular writes. To do this, the file-posix
driver tracks the wp location of all zones of the device. It uses an
array of uint64_t. The most significant bit of each wp location indicates
if the zone type is conventional zones.
The zones wp can be changed due to the following operations issued:
- zone reset: change the wp to the start offset of that zone
- zone finish: change to the end location of that zone
- write to a zone
- zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id:
20230508051510.177850-2-faithilikerun@gmail.com
[Fix errno propagation from handle_aiocb_zone_mgmt()
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:33 +0000 (12:55 +0800)]
docs/zoned-storage: add zoned device documentation
Add the documentation about the zoned device support to virtio-blk
emulation.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-9-faithilikerun@gmail.com
Message-id:
20230324090605.28361-9-faithilikerun@gmail.com
[Add index-api.rst to fix "zoned-storage.rst:document isn't included in
any toctree" error and fix pre-formatted code syntax.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:32 +0000 (12:55 +0800)]
block: add some trace events for new block layer APIs
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-8-faithilikerun@gmail.com
Message-id:
20230324090605.28361-8-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:31 +0000 (12:55 +0800)]
iotests: test new zone operations
The new block layer APIs of zoned block devices can be tested by:
$ tests/qemu-iotests/check zoned
Run each zone operation on a newly created null_blk device
and see whether it outputs the same zone information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-7-faithilikerun@gmail.com
Message-id:
20230324090605.28361-7-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:30 +0000 (12:55 +0800)]
block: add zoned BlockDriver check to block layer
Putting zoned/non-zoned BlockDrivers on top of each other is not
allowed.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-6-faithilikerun@gmail.com
Message-id:
20230324090605.28361-6-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and clarify that the check is about zoned
BlockDrivers.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:29 +0000 (12:55 +0800)]
block/raw-format: add zone operations to pass through requests
raw-format driver usually sits on top of file-posix driver. It needs to
pass through requests of zone commands.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-5-faithilikerun@gmail.com
Message-id:
20230324090605.28361-5-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:28 +0000 (12:55 +0800)]
block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-4-faithilikerun@gmail.com
Message-id:
20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:27 +0000 (12:55 +0800)]
block/file-posix: introduce helper functions for sysfs attributes
Use get_sysfs_str_val() to get the string value of device
zoned model. Then get_sysfs_zoned_model() can convert it to
BlockZoneModel type of QEMU.
Use get_sysfs_long_val() to get the long value of zoned device
information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-3-faithilikerun@gmail.com
Message-id:
20230324090605.28361-3-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sam Li [Mon, 8 May 2023 04:55:26 +0000 (12:55 +0800)]
block/block-common: add zoned device structs
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20230508045533.175575-2-faithilikerun@gmail.com
Message-id:
20230324090605.28361-2-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Juan Quintela [Mon, 8 May 2023 13:08:54 +0000 (15:08 +0200)]
qemu-file: Remove total from qemu_file_total_transferred_*()
Function is already quite long.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20230508130909.65420-7-quintela@redhat.com>
Juan Quintela [Mon, 8 May 2023 13:08:53 +0000 (15:08 +0200)]
qemu-file: Make rate_limit_used an uint64_t
Change all the functions that use it. It was already passed as
uint64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20230508130909.65420-6-quintela@redhat.com>
Juan Quintela [Mon, 8 May 2023 13:08:52 +0000 (15:08 +0200)]
qemu-file: make qemu_file_[sg]et_rate_limit() use an uint64_t
It is really size_t. Everything else uses uint64_t, so move this to
uint64_t as well. A size can't be negative anyways.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20230508130909.65420-5-quintela@redhat.com>
Juan Quintela [Mon, 8 May 2023 13:08:51 +0000 (15:08 +0200)]
migration: We set the rate_limit by a second
That the implementation does the check every 100 milliseconds is an
implementation detail that shouldn't be seen on the interfaz.
Notice that all callers of qemu_file_set_rate_limit() used the
division or pass 0, so this change is a NOP.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20230508130909.65420-4-quintela@redhat.com>
Juan Quintela [Mon, 8 May 2023 13:08:49 +0000 (15:08 +0200)]
migration: A rate limit value of 0 is valid
And it is the best way to not have rate_limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20230508130909.65420-2-quintela@redhat.com>
Song Gao [Thu, 6 Apr 2023 07:11:31 +0000 (15:11 +0800)]
hw/intc: Add NULL pointer check on LoongArch ipi device
When ipi mailbox is used, cpu_index is decoded from iocsr register.
cpu maybe does not exist. This patch adds NULL pointer check on
ipi device.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <
20230512100421.
1867848-4-gaosong@loongson.cn>
Song Gao [Thu, 6 Apr 2023 07:25:28 +0000 (15:25 +0800)]
hw/loongarch/virt: Set max 256 cpus support on loongarch virt machine
Add separate macro EXTIOI_CPUS for extioi interrupt controller, extioi
only supports 4 cpu. And set macro LOONGARCH_MAX_CPUS as 256 so that
loongarch virt machine supports more cpus.
Interrupts from external devices can only be routed cpu 0-3 because
of extioi limits, cpu internal interrupt such as timer/ipi can be
triggered on all cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <
20230512100421.
1867848-3-gaosong@loongson.cn>
Song Gao [Thu, 6 Apr 2023 06:57:27 +0000 (14:57 +0800)]
hw/loongarch/virt: Modify ipi as percpu device
ipi is used to communicate between cpus, this patch modified
loongarch ipi device as percpu device, so that there are
2 MemoryRegions with ipi device, rather than 2*cpus
MemoryRegions, which may be large than QDEV_MAX_MMIO if
more cpus are added on loongarch virt machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <
20230512100421.
1867848-2-gaosong@loongson.cn>
Song Gao [Sat, 13 May 2023 01:27:44 +0000 (09:27 +0800)]
tests/avocado: Add LoongArch machine start test
Add a new test in tests/avocado to check LoongArch virt machine start.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <
20230513012744.
1885728-1-gaosong@loongson.cn>
Alexander Bulekov [Sat, 6 May 2023 11:21:45 +0000 (07:21 -0400)]
loongarch: mark loongarch_ipi_iocsr re-entrnacy safe
loongarch_ipi_iocsr MRs rely on re-entrant IO through the ipi_send
function. As such, mark these MRs re-entrancy-safe.
Fixes:
a2e1753b80 ("memory: prevent dma-reentracy issues")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <
20230506112145.
3563708-1-alxndr@bu.edu>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Juan Quintela [Thu, 11 May 2023 14:12:08 +0000 (16:12 +0200)]
migration: Make dirtyrate.c target independent
After the previous two patches, there is nothing else that is target
specific.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230511141208.17779-6-quintela@redhat.com>
Juan Quintela [Thu, 11 May 2023 14:12:07 +0000 (16:12 +0200)]
migration: Teach dirtyrate about qemu_target_page_bits()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20230511141208.17779-5-quintela@redhat.com>
Juan Quintela [Thu, 11 May 2023 14:12:06 +0000 (16:12 +0200)]
migration: Teach dirtyrate about qemu_target_page_size()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <
20230511141208.17779-4-quintela@redhat.com>
Juan Quintela [Thu, 11 May 2023 14:12:05 +0000 (16:12 +0200)]
Use new created qemu_target_pages_to_MiB()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20230511141208.17779-3-quintela@redhat.com>
Juan Quintela [Thu, 11 May 2023 14:12:04 +0000 (16:12 +0200)]
softmmu: Create qemu_target_pages_to_MiB()
Function that convert a number of target_pages into its size in MiB.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <
20230511141208.17779-2-quintela@redhat.com>
Andrei Gudkov [Thu, 27 Apr 2023 12:42:57 +0000 (15:42 +0300)]
migration/calc-dirty-rate: replaced CRC32 with xxHash
This significantly reduces overhead of dirty page
rate calculation in sampling mode.
Tested using 32GiB VM on E5-2690 CPU.
With CRC32:
total_pages=
8388608 sampled_pages=16384 millis=71
With xxHash:
total_pages=
8388608 sampled_pages=16384 millis=14
Signed-off-by: Andrei Gudkov <gudkov.andrei@huawei.com>
Message-Id: <
cd115a89fc81d5f2eeb4ea7d57a98b84f794f340.
1682598010.git.gudkov.andrei@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Richard Henderson [Sat, 13 May 2023 10:23:14 +0000 (11:23 +0100)]
Merge tag 'or1k-pull-request-
20230513' of https://github.com/stffrdhrn/qemu into staging
OpenRISC FPU Updates for 8.1
A few fixes and updates to bring OpenRISC inline with the latest
architecture spec updates:
- Allow FPCSR to be accessed in user mode
- Select tininess detection before rounding
- Fix FPE Exception PC value
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmRfPIEACgkQw7McLV5m
# J+RFuhAAt4xxci52fxvPpgUu/mjKU6mbYNjBEPEh+OAcb+m/BrvKhazZDACkyLMe
# ehavWtI856jfy6DsIA5wj5+zhgV8W5DR6a1mHIhmSAoVq7e+NnC5y0GJC9B0Xd/2
# FNOq/LZPtv/w7u+D1pFJaTb07hAaFVIC05Arn4dXa1k3yBuyjqIJnlrXa3Jt0pLW
# To/z1zch1rUp6RhFmGxU+8/qvTbzqkm/F3kbe8l2z34371lTd6KhPwvKaImMpTYQ
# dvULTMXjZ6Dp8BmUrDcnLMTL3NbYcPrI+qOHX1X+dwzNFyui2I8Ci7IfEKJ460ja
# Fe2Ku/aDfHSZYYayWaYSlrrZ1AH0fLLwIkHSs95+xUMsl81mtS6lIysj7fAFRnM5
# 7tU4ov1T/leupvvUCUX5N4Yje/yvbuoAqGyhjDHzJ98vIe6fDhutU4Bm8/30q6Dy
# nKnfSgRHrrTrH042xW32DJnzaN2pEWrNtOMaegLMaqZ60app2YDaKJvtHLua1VjD
# b+g+X/+xBNb34k5e/f4z+GeGPoqE2wvwMcSkD+NBE8je3idPdMS/u5lQrvqvcbI/
# DJBRoPifNME/oYoTxPVKRnrCQIWQ6YkeLWVmqMfCVpjCF97gexo+UBUawJimTXFr
# gmcIYxv87oKF4KbCn7LsLlXGSpWSihKSBTHDxFPaKiRbnYZ5ais=
# =zqbX
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 May 2023 08:30:09 AM BST
# gpg: using RSA key
D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-
20230513' of https://github.com/stffrdhrn/qemu:
target/openrisc: Setup FPU for detecting tininess before rounding
target/openrisc: Set PC to cpu state on FPU exception
target/openrisc: Allow fpcsr access in user mode
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sat, 13 May 2023 06:36:55 +0000 (07:36 +0100)]
Merge tag 'pull-target-arm-
20230512' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* More refactoring of files into tcg/
* Don't allow stage 2 page table walks to downgrade to NS
* Fix handling of SW and NSW bits for stage 2 walks
* MAINTAINERS: Update Akihiko Odaki's email address
* ui: Fix pixel colour channel order for PNG screenshots
* docs: Remove unused weirdly-named cross-reference targets
* hw/mips/malta: Fix minor dead code issue
* Fixes for the "allow CONFIG_TCG=n" changes
* tests/qtest: Don't run cdrom boot tests if no accelerator is present
* target/arm: Correct AArch64.S2MinTxSZ 32-bit EL1 input size check
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmReXCMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hUTEACL2MrxSmAssP0pZ6qQGqgM
# uKz1aL8WDz2MyDzgt0jvy+bRw6081k4iyFGLpsHPWjAm9lipwVSIbVKsvJOrXxpJ
# LDfllv6XtGF/W0o0NDB2KRjC9ro71JoWWJrvjXPYImid3cBfmSdgyR3eUgOLbfj6
# qT2U9nKk8heRDXVb/BWorvajbZm0GaIypL4wUh3Ab2W17Fot073QZLpwcI7LQTJR
# RkyyknzCfaN0xLQ4wEsqJjfLpxgnB2XubSXtG86or7kiIC5/sPivE7fDj0BK9hAM
# Lpe/fkqBrCMGH3K4AC6zDWHQyDtrUT8IKTjR/kIdkjTBcVSzTyfiGob8/Tlmsez9
# rv0vrRJdNguJVo7zd2F17HmsPf4fznS56Yz392kY16LEV/OC6gISz2Sp7qdgbqHA
# ArEFQaYDi2AE/u2wBduZV+SVgZaDrEVtTDo5aw7ms3ebnaMFjB1YmMdp0vZE0p89
# Nlx2ooh0DsYOSLHGWjgRmegGpHgiWcYIW2Ekj2BvzB11fH9lbxvHZMavYNGugdh+
# Z0zj3qRp58+Qg7529AvLe9BWSGhIg6GIuTR/ROux6UL0EV6IZNcjtXQhEOSBqFMF
# uRjcbWOKZtPcpgC7aJj8JeeuzzkaqvWziw8S/ajRes65PvCCQvlxNlJfv49MkS5S
# iMYyID863vocejQpGMqs6A==
# =D3ev
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 12 May 2023 04:32:51 PM BST
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-
20230512' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Correct AArch64.S2MinTxSZ 32-bit EL1 input size check
tests/qtest: Don't run cdrom boot tests if no accelerator is present
target/arm: Select CONFIG_ARM_V7M when TCG is enabled
target/arm: Select SEMIHOSTING when using TCG
hw/mips/malta: Fix minor dead code issue
docs: Remove unused weirdly-named cross-reference targets
ui: Fix pixel colour channel order for PNG screenshots
MAINTAINERS: Update Akihiko Odaki's email address
target/arm: Fix handling of SW and NSW bits for stage 2 walks
target/arm: Don't allow stage 2 page table walks to downgrade to NS
target/arm: Move helper-{a64,mve,sme,sve}.h to tcg/
target/arm: Move translate-a32.h, arm_ldst.h, sve_ldst_internal.h to tcg/
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 9 May 2023 09:20:59 +0000 (10:20 +0100)]
target/arm: Correct AArch64.S2MinTxSZ 32-bit EL1 input size check
In check_s2_mmu_setup() we have a check that is attempting to
implement the part of AArch64.S2MinTxSZ that is specific to when EL1
is AArch32:
if !s1aarch64 then
// EL1 is AArch32
min_txsz = Min(min_txsz, 24);
Unfortunately we got this wrong in two ways:
(1) The minimum txsz corresponds to a maximum inputsize, but we got
the sense of the comparison wrong and were faulting for all
inputsizes less than 40 bits
(2) We try to implement this as an extra check that happens after
we've done the same txsz checks we would do for an AArch64 EL1, but
in fact the pseudocode is *loosening* the requirements, so that txsz
values that would fault for an AArch64 EL1 do not fault for AArch32
EL1, because it does Min(old_min, 24), not Max(old_min, 24).
You can see this also in the text of the Arm ARM in table D8-8, which
shows that where the implemented PA size is less than 40 bits an
AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit
IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to
constrain the IPA to the implemented PA size.
Because of part (2), we can't do this as a separate check, but
have to integrate it into aa64_va_parameters(). Add a new argument
to that function to indicate that EL1 is 32-bit. All the existing
callsites except the one in get_phys_addr_lpae() can pass 'false',
because they are either doing a lookup for a stage 1 regime or
else they don't care about the tsz/tsz_oob fields.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230509092059.
3176487-1-peter.maydell@linaro.org
Fabiano Rosas [Mon, 8 May 2023 18:16:11 +0000 (15:16 -0300)]
tests/qtest: Don't run cdrom boot tests if no accelerator is present
On a build configured with: --disable-tcg --enable-xen it is possible
to produce a QEMU binary with no TCG nor KVM support. Skip the cdrom
boot tests if that's the case.
Fixes:
0c1ae3ff9d ("tests/qtest: Fix tests when no KVM or TCG are present")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20230508181611.2621-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fabiano Rosas [Mon, 8 May 2023 18:16:10 +0000 (15:16 -0300)]
target/arm: Select CONFIG_ARM_V7M when TCG is enabled
We cannot allow this config to be disabled at the moment as not all of
the relevant code is protected by it.
Commit
29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a
KVM-only build") moved the CONFIGs of several boards to Kconfig, so it
is now possible that nothing selects ARM_V7M (e.g. when doing a
--without-default-devices build).
Return the CONFIG_ARM_V7M entry to a state where it is always selected
whenever TCG is available.
Fixes:
29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230508181611.2621-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fabiano Rosas [Mon, 8 May 2023 18:16:09 +0000 (15:16 -0300)]
target/arm: Select SEMIHOSTING when using TCG
Semihosting has been made a 'default y' entry in Kconfig, which does
not work because when building --without-default-devices, the
semihosting code would not be available.
Make semihosting unconditional when TCG is present.
Fixes:
29d9efca16 ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230508181611.2621-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 12 May 2023 14:43:38 +0000 (15:43 +0100)]
hw/mips/malta: Fix minor dead code issue
Coverity points out (in CID
1508390) that write_bootloader has
some dead code, where we assign to 'p' and then in the following
line assign to it again. This happened as a result of the
refactoring in commit
cd5066f8618b.
Fix the dead code by removing the 'void *v' variable entirely and
instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as
we do at its other callsite in write_bootloader_nanomips().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Peter Maydell [Fri, 12 May 2023 14:43:38 +0000 (15:43 +0100)]
docs: Remove unused weirdly-named cross-reference targets
In the doc sources, we have a few cross-reference targets with odd
names "pcsys_005fxyz". These are the legacy of the semi-automated
conversion of the old info docs to rST (the '005f' is because ASCII
0x5f is '_' and the old info link names had underscores in them).
Remove the targets which nothing links to, and rename the two targets
which are used to something a bit more descriptive.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20230421163642.
1151904-1-peter.maydell@linaro.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Peter Maydell [Fri, 12 May 2023 14:43:38 +0000 (15:43 +0100)]
ui: Fix pixel colour channel order for PNG screenshots
When we take a PNG screenshot the ordering of the colour channels in
the data is not correct, resulting in the image having weird
colouring compared to the actual display. (Specifically, on a
little-endian host the blue and red channels are swapped; on
big-endian everything is wrong.)
This happens because the pixman idea of the pixel data and the libpng
idea differ. PIXMAN_a8r8g8b8 defines that pixels are 32-bit values,
with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits
0-7. This means that on little-endian systems the bytes in memory
are
B G R A
and on big-endian systems they are
A R G B
libpng, on the other hand, thinks of pixels as being a series of
values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA
always wants bytes in the order
R G B A
This isn't the same as the pixman order for either big or little
endian hosts.
The alpha channel is also unnecessary bulk in the output PNG file,
because there is no alpha information in a screenshot.
To handle the endianness issue, we already define in ui/qemu-pixman.h
various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent
byte-order pixel channel formats. So we can use PIXMAN_BE_r8g8b8 and
PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of
R G B
and 3 bytes per pixel.
(PPM format screenshots get this right; they already use the
PIXMAN_BE_r8g8b8 format.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622
Fixes:
9a0a119a382867 ("Added parameter to take screenshot with screendump as PNG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20230502135548.
2451309-1-peter.maydell@linaro.org
Akihiko Odaki [Fri, 12 May 2023 14:43:37 +0000 (15:43 +0100)]
MAINTAINERS: Update Akihiko Odaki's email address
I am now employed by Daynix. Although my role as a reviewer of
macOS-related change is not very relevant to the employment, I decided
to use the company email address to avoid confusions from different
addresses.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20230506072333.32510-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 12 May 2023 14:43:37 +0000 (15:43 +0100)]
target/arm: Fix handling of SW and NSW bits for stage 2 walks
We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW
configuration bits. These allow configuration of whether the stage 2
page table walks for Secure IPA and NonSecure IPA should do their
descriptor reads from Secure or NonSecure physical addresses. (This
is separate from how the translation table base address and other
parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2
for its base address and walk parameters, regardless of the NSW bit,
and similarly for Secure.)
Provide a new function ptw_idx_for_stage_2() which returns the
MMU index to use for descriptor reads, and use it to set up
the .in_ptw_idx wherever we call get_phys_addr_lpae().
For a stage 2 walk, wherever we call get_phys_addr_lpae():
* .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx
* .in_secure should be true if .in_mmu_idx is Stage2_S
This allows us to correct S1_ptw_translate() so that it consistently
always sets its (out_secure, out_phys) to the result it gets from the
S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup).
This makes better conceptual sense because the S2 walk should return
us an (address space, address) tuple, not an address that we then
randomly assign to S or NS.
Our previous handling of SW and NSW was broken, so guest code
trying to use these bits to put the s2 page tables in the "other"
address space wouldn't work correctly.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20230504135425.
2748672-3-peter.maydell@linaro.org
Peter Maydell [Fri, 12 May 2023 14:43:37 +0000 (15:43 +0100)]
target/arm: Don't allow stage 2 page table walks to downgrade to NS
Bit 63 in a Table descriptor is only the NSTable bit for stage 1
translations; in stage 2 it is RES0. We were incorrectly looking at
it all the time.
This causes problems if:
* the stage 2 table descriptor was incorrectly setting the RES0 bit
* we are doing a stage 2 translation in Secure address space for
a NonSecure stage 1 regime -- in this case we would incorrectly
do an immediate downgrade to NonSecure
A bug elsewhere in the code currently prevents us from getting
to the second situation, but when we fix that it will be possible.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230504135425.
2748672-2-peter.maydell@linaro.org
Richard Henderson [Fri, 12 May 2023 14:43:37 +0000 (15:43 +0100)]
target/arm: Move helper-{a64,mve,sme,sve}.h to tcg/
While we cannot move the main "helper.h" out of target/arm/,
due to usage by generic code, we can move the sub-includes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id:
20230504110412.
1892411-3-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 12 May 2023 14:43:36 +0000 (15:43 +0100)]
target/arm: Move translate-a32.h, arm_ldst.h, sve_ldst_internal.h to tcg/
These files got missed when populating tcg/.
Because they are included with "", no change to the users required.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230504110412.
1892411-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stafford Horne [Thu, 16 Mar 2023 19:18:36 +0000 (04:18 +0900)]
target/openrisc: Setup FPU for detecting tininess before rounding
OpenRISC defines tininess to be detected before rounding. Setup qemu to
obey this.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Stafford Horne [Tue, 14 Feb 2023 09:41:29 +0000 (18:41 +0900)]
target/openrisc: Set PC to cpu state on FPU exception
Store the PC to ensure the correct value can be read in the exception
handler.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Stafford Horne [Sun, 12 Feb 2023 09:08:13 +0000 (18:08 +0900)]
target/openrisc: Allow fpcsr access in user mode
As per OpenRISC spec 1.4 FPCSR can be read and written in user mode.
Update mtspr and mfspr helpers to support this by moving the is_user
check into the helper.
Link: https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.4-rev0.pdf
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 11 May 2023 10:44:23 +0000 (11:44 +0100)]
Merge tag 'pull-tcg-
20230511-2' of https://gitlab.com/rth7680/qemu into staging
target/m68k: Fix gen_load_fp regression
accel/tcg: Ensure fairness with icount
disas: Move disas.c into the target-independent source sets
tcg: Use common routines for calling slow path helpers
tcg/*: Cleanups to qemu_ld/st constraints
tcg: Remove TARGET_ALIGNED_ONLY
accel/tcg: Reorg system mode load/store helpers
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRcxtYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9arQf8Di7CnMQE/jW+8w6v
# 5af0dX8/St2JnCXzG+qiW6mJm50Cy4GunCN66JcCAswpENvQLLsJP13c+4KTeB1T
# rGBbedFXTw1LsaoOcBvwhq7RTIROz4GESTS4EZoJMlMhMv0VotekUPPz4NFMZRKX
# LMvShM2C+f2p4HmDnnbki7M3+tMqpgoGCeBFX8Jy7/5sbpS/7ceXRio3ZRAhasPu
# vjA0zqUtoTs7ijKpXf3uRl/c7xql+f0d7SDdCRt4OKasfLCCDwkjtMf6plZ2jzuS
# OgwKc5N1jaMF6erHYZJIbfLLdUl20/JJEcbpU3Eh1XuHnzn1msS9JDOm2tvzwsto
# OpOKUg==
# =Lhy3
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 May 2023 11:43:34 AM BST
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-
20230511-2' of https://gitlab.com/rth7680/qemu: (53 commits)
target/loongarch: Do not include tcg-ldst.h
accel/tcg: Reorg system mode store helpers
accel/tcg: Reorg system mode load helpers
accel/tcg: Introduce tlb_read_idx
accel/tcg: Add cpu_in_serial_context
tcg: Remove TARGET_ALIGNED_ONLY
target/sh4: Remove TARGET_ALIGNED_ONLY
target/sh4: Use MO_ALIGN where required
target/nios2: Remove TARGET_ALIGNED_ONLY
target/mips: Remove TARGET_ALIGNED_ONLY
target/mips: Use MO_ALIGN instead of 0
target/mips: Add missing default_tcg_memop_mask
target/mips: Add MO_ALIGN to gen_llwp, gen_scwp
tcg/s390x: Simplify constraints on qemu_ld/st
tcg/s390x: Use ALGFR in constructing softmmu host address
tcg/riscv: Simplify constraints on qemu_ld/st
tcg/ppc: Remove unused constraint J
tcg/ppc: Remove unused constraints A, B, C, D
tcg/ppc: Adjust constraints on qemu_ld/st
tcg/ppc: Reorg tcg_out_tlb_read
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Wed, 8 Mar 2023 20:48:13 +0000 (12:48 -0800)]
target/loongarch: Do not include tcg-ldst.h
This header is supposed to be private to tcg and in fact
does not need to be included here at all.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 30 Oct 2022 01:07:32 +0000 (12:07 +1100)]
accel/tcg: Reorg system mode store helpers
Instead of trying to unify all operations on uint64_t, use
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 28 Oct 2022 21:40:51 +0000 (08:40 +1100)]
accel/tcg: Reorg system mode load helpers
Instead of trying to unify all operations on uint64_t, pull out
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 5 May 2023 20:55:01 +0000 (21:55 +0100)]
accel/tcg: Introduce tlb_read_idx
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Wed, 26 Oct 2022 04:58:09 +0000 (14:58 +1000)]
accel/tcg: Add cpu_in_serial_context
Like cpu_in_exclusive_context, but also true if
there is no other cpu against which we could race.
Use it in tb_flush as a direct replacement.
Use it in cpu_loop_exit_atomic to ensure that there
is no loop against cpu_exec_step_atomic.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 15:25:02 +0000 (16:25 +0100)]
tcg: Remove TARGET_ALIGNED_ONLY
All uses have now been expunged.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 10:18:14 +0000 (11:18 +0100)]
target/sh4: Remove TARGET_ALIGNED_ONLY
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 09:50:35 +0000 (10:50 +0100)]
target/sh4: Use MO_ALIGN where required
Mark all memory operations that are not already marked with UNALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 09:38:52 +0000 (10:38 +0100)]
target/nios2: Remove TARGET_ALIGNED_ONLY
In gen_ldx/gen_stx, the only two locations for memory operations,
mark the operation as either aligned (softmmu) or unaligned
(user-only, as if emulated by the kernel).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 09:32:13 +0000 (10:32 +0100)]
target/mips: Remove TARGET_ALIGNED_ONLY
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 09:23:34 +0000 (10:23 +0100)]
target/mips: Use MO_ALIGN instead of 0
The opposite of MO_UNALN is MO_ALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 09:22:23 +0000 (10:22 +0100)]
target/mips: Add missing default_tcg_memop_mask
Memory operations that are not already aligned, or otherwise
marked up, require addition of ctx->default_tcg_memop_mask.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 2 May 2023 09:01:56 +0000 (10:01 +0100)]
target/mips: Add MO_ALIGN to gen_llwp, gen_scwp
These are atomic operations, so mark as requiring alignment.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 7 Apr 2023 21:16:12 +0000 (14:16 -0700)]
tcg/s390x: Simplify constraints on qemu_ld/st
Adjust the softmmu tlb to use R0+R1, not any of the normally available
registers. Since we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 3 Apr 2023 06:14:53 +0000 (06:14 +0000)]
tcg/s390x: Use ALGFR in constructing softmmu host address
Rather than zero-extend the guest address into a register,
use an add instruction which zero-extends the second input.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 3 Apr 2023 19:47:55 +0000 (19:47 +0000)]
tcg/riscv: Simplify constraints on qemu_ld/st
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 1 May 2023 07:32:09 +0000 (08:32 +0100)]
tcg/ppc: Remove unused constraint J
Never used since its introduction.
Fixes:
3d582c6179c ("tcg-ppc64: Rearrange integer constant constraints")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 7 Apr 2023 21:24:08 +0000 (14:24 -0700)]
tcg/ppc: Remove unused constraints A, B, C, D
These constraints have not been used for quite some time.
Fixes:
77b73de67632 ("Use rem/div[u]_i32 drop div[u]2_i32")
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 4 Apr 2023 00:04:49 +0000 (03:04 +0300)]
tcg/ppc: Adjust constraints on qemu_ld/st
The softmmu tlb uses TCG_REG_{TMP1,TMP2,R0}, not any of the normally
available registers. Now that we handle overlap betwen inputs and
helper arguments, we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>