OSDN Git Service
Xin Long [Thu, 15 Jun 2017 09:49:08 +0000 (17:49 +0800)]
sctp: return next obj by passing pos + 1 into sctp_transport_get_idx
In sctp_for_each_transport, pos is used to save how many objs it has
dumped. Now it gets the last obj by sctp_transport_get_idx, then gets
the next obj by sctp_transport_get_next.
The issue is that in the meanwhile if some objs in transport hashtable
are removed and the objs nums are less than pos, sctp_transport_get_idx
would return NULL and hti.walker.tbl is NULL as well. At this moment
it should stop hti, instead of continue getting the next obj. Or it
would cause a NULL pointer dereference in sctp_transport_get_next.
This patch is to pass pos + 1 into sctp_transport_get_idx to get the
next obj directly, even if pos > objs nums, it would return NULL and
stop hti.
Fixes:
626d16f50f39 ("sctp: export some apis or variables for sctp_diag and reuse some for proc")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Wed, 14 Jun 2017 23:12:24 +0000 (00:12 +0100)]
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
This fixes CVE-2017-7482.
When a kerberos 5 ticket is being decoded so that it can be loaded into an
rxrpc-type key, there are several places in which the length of a
variable-length field is checked to make sure that it's not going to
overrun the available data - but the data is padded to the nearest
four-byte boundary and the code doesn't check for this extra. This could
lead to the size-remaining variable wrapping and the data pointer going
over the end of the buffer.
Fix this by making the various variable-length data checks use the padded
length.
Reported-by: 石磊 <shilei-c@360.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.c.dionne@auristor.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 15 Jun 2017 08:33:58 +0000 (16:33 +0800)]
ipv6: fix calling in6_ifa_hold incorrectly for dad work
Now when starting the dad work in addrconf_mod_dad_work, if the dad work
is idle and queued, it needs to hold ifa.
The problem is there's one gap in [1], during which if the pending dad work
is removed elsewhere. It will miss to hold ifa, but the dad word is still
idea and queue.
if (!delayed_work_pending(&ifp->dad_work))
in6_ifa_hold(ifp);
<--------------[1]
mod_delayed_work(addrconf_wq, &ifp->dad_work, delay);
An use-after-free issue can be caused by this.
Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in
net6_ifa_finish_destroy was hit because of it.
As Hannes' suggestion, this patch is to fix it by holding ifa first in
addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if
the dad_work is already in queue.
Note that this patch did not choose to fix it with:
if (!mod_delayed_work(delay))
in6_ifa_hold(ifp);
As with it, when delay == 0, dad_work would be scheduled immediately, all
addrconf_mod_dad_work(0) callings had to be moved under ifp->lock.
Reported-by: Wei Chen <weichen@redhat.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 15 Jun 2017 09:09:47 +0000 (18:09 +0900)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) The netlink attribute passed in to dev_set_alias() is not
necessarily NULL terminated, don't use strlcpy() on it. From
Alexander Potapenko.
2) Fix implementation of atomics in arm64 bpf JIT, from Daniel
Borkmann.
3) Correct the release of netdevs and driver private data in certain
circumstances.
4) Sanitize netlink message length properly in decnet, from Mateusz
Jurczyk.
5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From
Yuval Mintz.
6) Hash secret is never initialized in ipv6 ILA translation code, from
Arnd Bergmann. I guess those clang warnings about unused inline
functions are useful for something!
7) Fix endian selection in bpf_endian.h, from Daniel Borkmann.
8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX
and CAIF. From Mateusz Jurczyk.
9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario
Molitor.
10) Do not leak netdev on dev_alloc_name() errors in mac80211, from
Johannes Berg.
11) Fix locking in sctp_for_each_endpoint(), from Xin Long.
12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle.
13) Fix use after free in ip_mc_clear_src(), from WANG Cong.
14) Fix regressions caused by ICMP rate limiting changes in 4.11, from
Jesper Dangaard Brouer.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
i40e: Fix a sleep-in-atomic bug
net: don't global ICMP rate limit packets originating from loopback
net/act_pedit: fix an error code
net: update undefined ->ndo_change_mtu() comment
net_sched: move tcf_lock down after gen_replace_estimator()
caif: Add sockaddr length check before accessing sa_family in connect handler
qed: fix dump of context data
qmi_wwan: new Telewell and Sierra device IDs
net: phy: Fix MDIO_THUNDER dependencies
netconsole: Remove duplicate "netconsole: " logging prefix
igmp: acquire pmc lock for ip_mc_clear_src()
r8152: give the device version
net: rps: fix uninitialized symbol warning
mac80211: don't send SMPS action frame in AP mode when not needed
mac80211/wpa: use constant time memory comparison for MACs
mac80211: set bss_info data before configuring the channel
mac80211: remove 5/10 MHz rate code from station MLME
mac80211: Fix incorrect condition when checking rx timestamp
mac80211: don't look at the PM bit of BAR frames
i40e: fix handling of HW ATR eviction
...
Linus Torvalds [Thu, 15 Jun 2017 08:54:51 +0000 (17:54 +0900)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a bug on sparc where we may dereference freed stack memory"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: Work around deallocated stack frame reference gcc bug on sparc.
Linus Torvalds [Thu, 15 Jun 2017 08:51:19 +0000 (17:51 +0900)]
Merge tag 'acpi-4.12-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert an ACPICA commit from the 4.11 cycle that causes problems
to happen on some systems and add a protection against possible kernel
crashes due to table reference counter imbalance.
Specifics:
- Revert a 4.11 ACPICA change that made assumptions which are not
satisfied on some systems and caused the enumeration of resources
to fail on them (Rafael Wysocki).
- Add a mechanism to prevent tables from being unmapped prematurely
due to reference counter overflows (Lv Zheng)"
* tag 'acpi-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance
Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
Linus Torvalds [Thu, 15 Jun 2017 08:47:46 +0000 (17:47 +0900)]
Merge tag 'pm-4.12-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a recent cpufreq schedutil governor change that turned
out to be problematic and fix a few minor issues in cpufreq, cpuidle
and the Exynos devfreq drivers.
Specifics:
- Revert a recent cpufreq schedutil governor change that caused some
systems to behave undesirably (Rafael Wysocki).
- Fix a cpufreq conservative governor issue introduced during the
3.10 cycle that prevents it from working as expected in some
situations (Tomasz Wilczyński).
- Fix an error code path in the generic cpuidle driver for DT-based
systems (Christophe Jaillet).
- Fix three minor issues in devfreq drivers for Exynos (Arvind Yadav,
Krzysztof Kozlowski)"
* tag 'pm-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: dt: Add missing 'of_node_put()'
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
Revert "cpufreq: schedutil: Reduce frequencies slower"
PM / devfreq: exynos-ppmu: Staticize event list
PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable
PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
Linus Torvalds [Thu, 15 Jun 2017 08:44:41 +0000 (17:44 +0900)]
Merge branch 'for-4.12/driver-matching-fix' of git://git./linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
- ifdef-based bandaid for a long-standing issue with HID driver
matching, avoiding regressions in cases where specific driver is not
enabled in kernel .config, from Jiri Kosina
* 'for-4.12/driver-matching-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: let generic driver yield control iff specific driver has been enabled
Linus Torvalds [Thu, 15 Jun 2017 08:37:40 +0000 (17:37 +0900)]
Merge tag 'media/v4.12-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some build dependency issues at CEC core with randconfigs
- fix an off by one error at vb2
- a race fix at cec core
- driver fixes at tc358743, sir_ir and rainshadow-cec
* tag 'media/v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED
[media] cec: race fix: don't return -ENONET in cec_receive()
[media] sir_ir: infinite loop in interrupt handler
[media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE
[media] cec: improve MEDIA_CEC_RC dependencies
[media] vb2: Fix an off by one error in 'vb2_plane_vaddr'
[media] rainshadow-cec: Fix missing spin_lock_init()
[media] tc358743: fix register i2c_rd/wr function fix
Jia-Ju Bai [Wed, 14 Jun 2017 23:35:31 +0000 (16:35 -0700)]
i40e: Fix a sleep-in-atomic bug
The driver may sleep under a spin lock, and the function call path is:
i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh)
i40e_vsi_remove_pvid
i40e_vlan_stripping_disable
i40e_aq_update_vsi_params
i40e_asq_send_command
mutex_lock --> may sleep
To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and
the lock is acquired again after this function.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Wed, 14 Jun 2017 23:52:32 +0000 (01:52 +0200)]
Merge branch 'acpica-fixes'
* acpica-fixes:
ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance
Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
Rafael J. Wysocki [Wed, 14 Jun 2017 23:51:33 +0000 (01:51 +0200)]
Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'
* pm-cpufreq:
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
Revert "cpufreq: schedutil: Reduce frequencies slower"
* pm-cpuidle:
cpuidle: dt: Add missing 'of_node_put()'
* pm-devfreq:
PM / devfreq: exynos-ppmu: Staticize event list
PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable
PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
Jesper Dangaard Brouer [Wed, 14 Jun 2017 11:27:37 +0000 (13:27 +0200)]
net: don't global ICMP rate limit packets originating from loopback
Florian Weimer seems to have a glibc test-case which requires that
loopback interfaces does not get ICMP ratelimited. This was broken by
commit
c0303efeab73 ("net: reduce cycles spend on ICMP replies that
gets rate limited").
An ICMP response will usually be routed back-out the same incoming
interface. Thus, take advantage of this and skip global ICMP
ratelimit when the incoming device is loopback. In the unlikely event
that the outgoing it not loopback, due to strange routing policy
rules, ICMP rate limiting still works via peer ratelimiting via
icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812
(section 4.3.2.8 "Rate Limiting").
This seems to fix the reproducer given by Florian. While still
avoiding to perform expensive and unneeded outgoing route lookup for
rate limited packets (in the non-loopback case).
Fixes:
c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited")
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: "H.J. Lu" <hjl.tools@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 14 Jun 2017 10:29:31 +0000 (13:29 +0300)]
net/act_pedit: fix an error code
I'm reviewing static checker warnings where we do ERR_PTR(0), which is
the same as NULL. I'm pretty sure we intended to return ERR_PTR(-EINVAL)
here. Sometimes these bugs lead to a NULL dereference but I don't
immediately see that problem here.
Fixes:
71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Magnus Damm [Wed, 14 Jun 2017 07:15:24 +0000 (16:15 +0900)]
net: update undefined ->ndo_change_mtu() comment
Update ->ndo_change_mtu() callback comment to remove text
about returning error in case of undefined callback. This
change makes the comment match the existing code behavior.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 13 Jun 2017 20:36:24 +0000 (13:36 -0700)]
net_sched: move tcf_lock down after gen_replace_estimator()
Laura reported a sleep-in-atomic kernel warning inside
tcf_act_police_init() which calls gen_replace_estimator() with
spinlock protection.
It is not necessary in this case, we already have RTNL lock here
so it is enough to protect concurrent writers. For the reader,
i.e. tcf_act_police(), it needs to make decision based on this
rate estimator, in the worst case we drop more/less packets than
necessary while changing the rate in parallel, it is still acceptable.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Nick Huber <nicholashuber@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mateusz Jurczyk [Tue, 13 Jun 2017 18:06:12 +0000 (20:06 +0200)]
caif: Add sockaddr length check before accessing sa_family in connect handler
Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in the connect()
handler of the AF_CAIF socket. Since the syscall doesn't enforce a minimum
size of the corresponding memory region, very short sockaddrs (zero or one
byte long) result in operating on uninitialized memory while referencing
sa_family.
Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 13 Jun 2017 17:46:01 +0000 (13:46 -0400)]
Merge tag 'batadv-net-for-davem-
20170613' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are two batman-adv bugfixes:
- fix rx packet counters for local ARP replies, by Sven Eckelmann
- fix memory leaks for unicast packetes received from another gateway
in bridge loop avoidance, by Andreas Pape
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 13 Jun 2017 17:34:13 +0000 (13:34 -0400)]
Merge tag 'mac80211-for-davem-2017-06-13' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Some fixes:
* Avi fixes some fallout from my mac80211 RX flags changes
* Emmanuel fixes an issue with adhering to the spec, and
an oversight in the SMPS management code
* Jason's patch makes mac80211 use constant-time memory
comparisons for message authentication, to avoid having
potentially observable timing differences
* my fix makes mac80211 set the basic rates bitmap before
the channel so the next update to the driver has more
consistent data - this required another rework patch to
remove some useless 5/10 MHz code that can never be hit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tayar, Tomer [Tue, 13 Jun 2017 09:15:59 +0000 (12:15 +0300)]
qed: fix dump of context data
Currently when dumping a context data only word number '1' is read for the
entire context.
Fixes:
c965db444629 ("qed: Add support for debug data collection")
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Tue, 13 Jun 2017 17:10:18 +0000 (19:10 +0200)]
qmi_wwan: new Telewell and Sierra device IDs
A new Sierra Wireless EM7305 device ID used in a Toshiba laptop,
and two Longcheer device IDs entries used by Telewell TW-3G HSPA+
branded modems.
Reported-by: Petr Kloc <petr_kloc@yahoo.com>
Reported-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 13 Jun 2017 00:18:51 +0000 (17:18 -0700)]
net: phy: Fix MDIO_THUNDER dependencies
After commit
90eff9096c01 ("net: phy: Allow splitting MDIO
bus/device support from PHYs") we could create a configuration where
MDIO_DEVICE=y and PHYLIB=m which leads to the following undefined
references:
drivers/built-in.o: In function `thunder_mdiobus_pci_remove':
>> mdio-thunder.c:(.text+0x2a212f): undefined reference to
>> `mdiobus_unregister'
>> mdio-thunder.c:(.text+0x2a2138): undefined reference to
>> `mdiobus_free'
drivers/built-in.o: In function `thunder_mdiobus_pci_probe':
mdio-thunder.c:(.text+0x2a22e7): undefined reference to
`devm_mdiobus_alloc_size'
mdio-thunder.c:(.text+0x2a236f): undefined reference to
`of_mdiobus_register'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes:
90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 12 Jun 2017 23:39:51 +0000 (16:39 -0700)]
netconsole: Remove duplicate "netconsole: " logging prefix
It's already added by pr_fmt so remove the explicit use.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 12 Jun 2017 16:52:26 +0000 (09:52 -0700)]
igmp: acquire pmc lock for ip_mc_clear_src()
Andrey reported a use-after-free in add_grec():
for (psf = *psf_list; psf; psf = psf_next) {
...
psf_next = psf->sf_next;
where the struct ip_sf_list's were already freed by:
kfree+0xe8/0x2b0 mm/slub.c:3882
ip_mc_clear_src+0x69/0x1c0 net/ipv4/igmp.c:2078
ip_mc_dec_group+0x19a/0x470 net/ipv4/igmp.c:1618
ip_mc_drop_socket+0x145/0x230 net/ipv4/igmp.c:2609
inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:411
sock_release+0x8d/0x1e0 net/socket.c:597
sock_close+0x16/0x20 net/socket.c:1072
This happens because we don't hold pmc->lock in ip_mc_clear_src()
and a parallel mr_ifc_timer timer could jump in and access them.
The RCU lock is there but it is merely for pmc itself, this
spinlock could actually ensure we don't access them in parallel.
Thanks to Eric and Long for discussion on this bug.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Mon, 12 Jun 2017 11:56:51 +0000 (13:56 +0200)]
r8152: give the device version
Getting the device version out of the driver really aids debugging.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ashwanth Goli [Tue, 13 Jun 2017 11:24:55 +0000 (16:54 +0530)]
net: rps: fix uninitialized symbol warning
This patch fixes uninitialized symbol warning that
got introduced by the following commit
773fc8f6e8d6 ("net: rps: send out pending IPI's on CPU hotplug")
Signed-off-by: Ashwanth Goli <ashwanth@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Kosina [Fri, 9 Jun 2017 11:15:37 +0000 (13:15 +0200)]
HID: let generic driver yield control iff specific driver has been enabled
There are many situations where generic HID driver provides some basic level
of support for certain device, but later this support (usually by implementing
vendor-specific extensions of HID protocol) is extended and the support moved
over to a separate (usually per-vendor) specific driver.
This might bring a rather unpleasant suprise for users, as all of a sudden
there is a new config option they have to enable in order to get any support
for their device whatsoever, although previous kernel versions provided basic
support through the generic driver. Which is rightfully seen as a regression.
Fix this by including the entry for a particular device in
hid_have_special_driver[] iff the specific config option has been specified,
and let generic driver handle the device otherwise.
Also make the behavior of hid_scan_report() (where the same decision is being
taken on a per-report level) consistent.
While at it, reshuffle the hid_have_special_driver[] a bit to restore the
alphabetical ordering (first order by config option, and within those
sections order by VID).
This is considered a short-term solution, before generic way of giving
precedence to special drivers and falling back to generic driver is
figured out.
While at it, fixup a missing entry for GFRM driver; thanks to Hans de Geode for
spotting this (and for discovering a few issues in the conversion).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Emmanuel Grumbach [Sat, 10 Jun 2017 10:52:45 +0000 (13:52 +0300)]
mac80211: don't send SMPS action frame in AP mode when not needed
mac80211 allows to modify the SMPS state of an AP both,
when it is started, and after it has been started. Such a
change will trigger an action frame to all the peers that
are currently connected, and will be remembered so that
new peers will get notified as soon as they connect (since
the SMPS setting in the beacon may not be the right one).
This means that we need to remember the SMPS state
currently requested as well as the SMPS state that was
configured initially (and advertised in the beacon).
The former is bss->req_smps and the latter is
sdata->smps_mode.
Initially, the AP interface could only be started with
SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF
always. Later, a nl80211 API was added to be able to start
an AP with a different AP mode. That code forgot to update
bss->req_smps and because of that, if the AP interface was
started with SMPS_DYNAMIC, we had:
sdata->smps_mode = SMPS_DYNAMIC
bss->req_smps = SMPS_OFF
That configuration made mac80211 think it needs to fire off
an action frame to any new station connecting to the AP in
order to let it know that the actual SMPS configuration is
SMPS_OFF.
Fix that by properly setting bss->req_smps in
ieee80211_start_ap.
Fixes:
f69931748730 ("mac80211: set smps_mode according to ap params")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jason A. Donenfeld [Sat, 10 Jun 2017 02:59:12 +0000 (04:59 +0200)]
mac80211/wpa: use constant time memory comparison for MACs
Otherwise, we enable all sorts of forgeries via timing attack.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sat, 10 Jun 2017 10:52:43 +0000 (13:52 +0300)]
mac80211: set bss_info data before configuring the channel
When mac80211 changes the channel, it also calls into the driver's
bss_info_changed() callback, e.g. with BSS_CHANGED_IDLE. The driver
may, like iwlwifi does, access more data from bss_info in that case
and iwlwifi accesses the basic_rates bitmap, but if changing from a
band with more (basic) rates to one with fewer, an out-of-bounds
access of the rate array may result.
While we can't avoid having invalid data at some point in time, we
can avoid having it while we call the driver - so set up all the
data before configuring the channel, and then apply it afterwards.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195677
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Debugged-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sat, 10 Jun 2017 10:52:44 +0000 (13:52 +0300)]
mac80211: remove 5/10 MHz rate code from station MLME
There's no need for the station MLME code to handle bitrates for 5
or 10 MHz channels when it can't ever create such a configuration.
Remove the unnecessary code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avraham Stern [Mon, 12 Jun 2017 07:44:58 +0000 (10:44 +0300)]
mac80211: Fix incorrect condition when checking rx timestamp
If the driver reports the rx timestamp at PLCP start, mac80211 can
only handle legacy encoding, but the code checks that the encoding
is not legacy. Fix this.
Fixes:
da6a4352e7c8 ("mac80211: separate encoding/bandwidth from flags")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Emmanuel Grumbach [Thu, 8 Jun 2017 11:00:49 +0000 (14:00 +0300)]
mac80211: don't look at the PM bit of BAR frames
When a peer sends a BAR frame with PM bit clear, we should
not modify its PM state as madated by the spec in
802.11-20012 10.2.1.2.
Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Linus Torvalds [Tue, 13 Jun 2017 06:09:10 +0000 (15:09 +0900)]
Merge tag 'xtensa-
20170612' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- don't use linux IRQ #0 in legacy irq domains: fixes timer interrupt
assignment when it's hardware IRQ # is 0 and the kernel is built w/o
device tree support
- reduce reservation size for double exception vector literals from 48
to 20 bytes: fixes build on cores with small user exception vector
- cleanups: use kmalloc_array instead of kmalloc in simdisk_init and
seq_puts instead of seq_printf in c_show.
* tag 'xtensa-
20170612' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: don't use linux IRQ #0
xtensa: reduce double exception literal reservation
xtensa: ISS: Use kmalloc_array() in simdisk_init()
xtensa: Use seq_puts() in c_show()
Linus Torvalds [Tue, 13 Jun 2017 06:07:11 +0000 (15:07 +0900)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- A fix for KVM to avoid kernel oopses in case of host protection
faults due to runtime instrumentation
- A fix for the AP bus to avoid dead devices after unbind / bind
- A fix for a compile warning merged from the vfio_ccw tree
- Updated default configurations
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfig
s390/zcrypt: Fix blocking queue device after unbind/bind.
s390/vfio_ccw: make some symbols static
s390/kvm: do not rely on the ILC on kvm host protection fauls
Jacob Keller [Mon, 12 Jun 2017 22:38:36 +0000 (15:38 -0700)]
i40e: fix handling of HW ATR eviction
A recent commit to refactor the driver and remove the hw_disabled_flags
field accidentally introduced two regressions. First, we overwrote
pf->flags which removed various key flags including the MSI-X settings.
Additionally, it was intended that we have now two flags,
HW_ATR_EVICT_CAPABLE and HW_ATR_EVICT_ENABLED, but this was not done,
and we accidentally were mis-using HW_ATR_EVICT_CAPABLE everywhere.
This patch adds the missing piece, HW_ATR_EVICT_ENABLED, and safely
updates pf->flags instead of overwriting it.
Without this patch we will have many problems including disabling MSI-X
support, and we'll attempt to use HW ATR eviction on devices which do
not support it.
Fixes:
47994c119a36 ("i40e: remove hw_disabled_flags in favor of using separate flag bits", 2017-04-19)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karicheri, Muralidharan [Mon, 12 Jun 2017 19:06:26 +0000 (15:06 -0400)]
hsr: fix incorrect warning
When HSR interface is setup using ip link command, an annoying warning
appears with the trace as below:-
[ 203.019828] hsr_get_node: Non-HSR frame
[ 203.019833] Modules linked in:
[ 203.019848] CPU: 0 PID: 158 Comm: sd-resolve Tainted: G W
4.12.0-rc3-00052-g9fa6bf70 #2
[ 203.019853] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 203.019869] [<
c0110280>] (unwind_backtrace) from [<
c010c2f4>] (show_stack+0x10/0x14)
[ 203.019880] [<
c010c2f4>] (show_stack) from [<
c04b9f64>] (dump_stack+0xac/0xe0)
[ 203.019894] [<
c04b9f64>] (dump_stack) from [<
c01374e8>] (__warn+0xd8/0x104)
[ 203.019907] [<
c01374e8>] (__warn) from [<
c0137548>] (warn_slowpath_fmt+0x34/0x44)
root@am57xx-evm:~# [ 203.019921] [<
c0137548>] (warn_slowpath_fmt) from [<
c081126c>] (hsr_get_node+0x148/0x170)
[ 203.019932] [<
c081126c>] (hsr_get_node) from [<
c0814240>] (hsr_forward_skb+0x110/0x7c0)
[ 203.019942] [<
c0814240>] (hsr_forward_skb) from [<
c0811d64>] (hsr_dev_xmit+0x2c/0x34)
[ 203.019954] [<
c0811d64>] (hsr_dev_xmit) from [<
c06c0828>] (dev_hard_start_xmit+0xc4/0x3bc)
[ 203.019963] [<
c06c0828>] (dev_hard_start_xmit) from [<
c06c13d8>] (__dev_queue_xmit+0x7c4/0x98c)
[ 203.019974] [<
c06c13d8>] (__dev_queue_xmit) from [<
c0782f54>] (ip6_finish_output2+0x330/0xc1c)
[ 203.019983] [<
c0782f54>] (ip6_finish_output2) from [<
c0788f0c>] (ip6_output+0x58/0x454)
[ 203.019994] [<
c0788f0c>] (ip6_output) from [<
c07b16cc>] (mld_sendpack+0x420/0x744)
As this is an expected path to hsr_get_node() with frame coming from
the master interface, add a check to ensure packet is not from the
master port and then warn.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Perle [Mon, 12 Jun 2017 08:06:57 +0000 (10:06 +0200)]
proc: snmp6: Use correct type in memset
Reading /proc/net/snmp6 yields bogus values on 32 bit kernels.
Use "u64" instead of "unsigned long" in sizeof().
Fixes:
4a4857b1c81e ("proc: Reduce cache miss in snmp6_seq_show")
Signed-off-by: Christian Perle <christian.perle@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Mon, 12 Jun 2017 12:40:08 +0000 (14:40 +0200)]
Merge branch 'for-next' of https://git./linux/kernel/git/mzx/devfreq
Pull devfreq fixes from MyungJoo Ham.
* 'for-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
PM / devfreq: exynos-ppmu: Staticize event list
PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable
PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
Christophe Jaillet [Sun, 11 Jun 2017 12:28:54 +0000 (14:28 +0200)]
cpuidle: dt: Add missing 'of_node_put()'
'of_node_put()' should be called on pointer returned by
'of_parse_phandle()' when done. In this function this is done in all path
except this 'continue', so add it.
Fixes:
97735da074fd (drivers: cpuidle: Add status property to ARM idle states)
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tomasz Wilczyński [Sun, 11 Jun 2017 08:28:39 +0000 (17:28 +0900)]
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
Commit
27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency
decrease checking) removed the 10 point substraction when comparing the
load against down_threshold but did not remove the related limit for the
down_threshold value. As a result, down_threshold lower than 11 is not
allowed even though values from 1 to 10 do work correctly too. The
comment ("cannot be lower than 11 otherwise freq will not fall") also
does not apply after removing the substraction.
For this reason, allow down_threshold to take any value from 1 to 99
and fix the related comment.
Fixes:
27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency decrease checking)
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 12 Jun 2017 12:16:16 +0000 (14:16 +0200)]
Revert "cpufreq: schedutil: Reduce frequencies slower"
Revert commit
39b64aa1c007 (cpufreq: schedutil: Reduce frequencies
slower) that introduced unintentional changes in behavior leading
to adverse effects on some systems.
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lv Zheng [Wed, 7 Jun 2017 04:54:58 +0000 (12:54 +0800)]
ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance
Considering this case:
1. A program opens a sysfs table file 65535 times, it can increase
validation_count and first increment cause the table to be mapped:
validation_count = 65535
2. AML execution causes "Load" to be executed on the same
table, this time it cannot increase validation_count, so
validation_count remains:
validation_count = 65535
3. The program closes sysfs table file 65535 times, it can decrease
validation_count and the last decrement cause the table to be
unmapped:
validation_count = 0
4. AML code still accessing the loaded table, kernel crash can be
observed.
To prevent that from happening, add a validation_count threashold.
When it is reached, the validation_count can no longer be
incremented/decremented to invalidate the table descriptor (means
preventing table unmappings)
Note that code added in acpi_tb_put_table() is actually a no-op but
changes the warning message into a "warn once" one. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog, comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Krzysztof Kozlowski [Wed, 7 Jun 2017 18:12:28 +0000 (20:12 +0200)]
PM / devfreq: exynos-ppmu: Staticize event list
The ppmu_events array is accessed only in this compilation unit so it
can be made static.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Arvind Yadav [Fri, 19 May 2017 10:56:04 +0000 (16:26 +0530)]
PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Arvind Yadav [Fri, 19 May 2017 10:50:35 +0000 (16:20 +0530)]
PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Linus Torvalds [Sun, 11 Jun 2017 23:48:20 +0000 (16:48 -0700)]
Linux 4.12-rc5
Linus Torvalds [Sun, 11 Jun 2017 23:17:29 +0000 (16:17 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull key subsystem fixes from James Morris:
"Here are a bunch of fixes for Linux keyrings, including:
- Fix up the refcount handling now that key structs use the
refcount_t type and the refcount_t ops don't allow a 0->1
transition.
- Fix a potential NULL deref after error in x509_cert_parse().
- Don't put data for the crypto algorithms to use on the stack.
- Fix the handling of a null payload being passed to add_key().
- Fix incorrect cleanup an uninitialised key_preparsed_payload in
key_update().
- Explicit sanitisation of potentially secure data before freeing.
- Fixes for the Diffie-Helman code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
KEYS: fix refcount_inc() on zero
KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API
crypto : asymmetric_keys : verify_pefile:zero memory content before freeing
KEYS: DH: add __user annotations to keyctl_kdf_params
KEYS: DH: ensure the KDF counter is properly aligned
KEYS: DH: don't feed uninitialized "otherinfo" into KDF
KEYS: DH: forbid using digest_null as the KDF hash
KEYS: sanitize key structs before freeing
KEYS: trusted: sanitize all key material
KEYS: encrypted: sanitize all key material
KEYS: user_defined: sanitize key payloads
KEYS: sanitize add_key() and keyctl() key payloads
KEYS: fix freeing uninitialized memory in key_update()
KEYS: fix dereferencing NULL payload with nonzero length
KEYS: encrypted: use constant-time HMAC comparison
KEYS: encrypted: fix race causing incorrect HMAC calculations
KEYS: encrypted: fix buffer overread in valid_master_desc()
KEYS: encrypted: avoid encrypting/decrypting stack buffers
KEYS: put keyring if install_session_keyring_to_cred() fails
KEYS: Delete an error message for a failed memory allocation in get_derived_key()
...
Linus Torvalds [Sun, 11 Jun 2017 22:51:56 +0000 (15:51 -0700)]
compiler, clang: properly override 'inline' for clang
Commit
abb2ea7dfd82 ("compiler, clang: suppress warning for unused
static inline functions") just caused more warnings due to re-defining
the 'inline' macro.
So undef it before re-defining it, and also add the 'notrace' attribute
like the gcc version that this is overriding does.
Maybe this makes clang happier.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Donald Sharp [Sat, 10 Jun 2017 20:30:17 +0000 (16:30 -0400)]
net: ipmr: Fix some mroute forwarding issues in vrf's
This patch fixes two issues:
1) When forwarding on *,G mroutes that are in a vrf, the
kernel was dropping information about the actual incoming
interface when calling ip_mr_forward from ip_mr_input.
This caused ip_mr_forward to send the multicast packet
back out the incoming interface. Fix this by
modifying ip_mr_forward to be handed the correctly
resolved dev.
2) When a unresolved cache entry is created we store
the incoming skb on the unresolved cache entry and
upon mroute resolution from the user space daemon,
we attempt to forward the packet. Again we were
not resolving to the correct incoming device for
a vrf scenario, before calling ip_mr_forward.
Fix this by resolving to the correct interface
and calling ip_mr_forward with the result.
Fixes:
e58e41596811 ("net: Enable support for VRF with ipv4 multicast")
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 11 Jun 2017 20:40:52 +0000 (16:40 -0400)]
Merge tag 'mlx5-fixes-2017-06-11' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox mlx5 fixes 2017-06-11
This series contains some fixes for the mlx5 core and netdev driver.
Please pull and let me know if there's any problem.
For -stable:
("net/mlx5e: Added BW check for DIM decision mechanism") kernels >= 4.9
("net/mlx5e: Fix wrong indications in DIM due to counter wraparound") kernels >= 4.9
("net/mlx5: Remove several module events out of ethtool stats") kernels >= 4.10
("net/mlx5: Enable 4K UAR only when page size is bigger than 4K") kernels >= 4.11
*all patches apply with no issue on their -stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 11 Jun 2017 20:36:48 +0000 (16:36 -0400)]
Merge branch 'ena-fixes'
Netanel Belgazal says:
====================
Bugs fixes in ena ethernet driver
This patchset contains fixes for the bugs that were discovered so far.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:51 +0000 (15:42 +0300)]
net: ena: update ena driver to version 1.1.7
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:50 +0000 (15:42 +0300)]
net: ena: bug fix in lost tx packets detection mechanism
check_for_missing_tx_completions() is called from a timer
task and looking for lost tx packets.
The old implementation accumulate all the lost tx packets
and did not check if those packets were retrieved on a later stage.
This cause to a situation where the driver reset
the device for no reason.
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:49 +0000 (15:42 +0300)]
net: ena: disable admin msix while working in polling mode
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:48 +0000 (15:42 +0300)]
net: ena: fix theoretical Rx hang on low memory systems
For the rare case where the device runs out of free rx buffer
descriptors (in case of pressure on kernel memory),
and the napi handler continuously fail to refill new Rx descriptors
until device rx queue totally runs out of all free rx buffers
to post incoming packet, leading to a deadlock:
* The device won't send interrupts since all the new
Rx packets will be dropped.
* The napi handler won't try to allocate new Rx descriptors
since allocation is part of NAPI that's not being invoked any more
The fix involves detecting this scenario and rescheduling NAPI
(to refill buffers) by the keepalive/watchdog task.
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:47 +0000 (15:42 +0300)]
net: ena: add missing unmap bars on device removal
This patch also change the mapping functions to devm_ functions
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:46 +0000 (15:42 +0300)]
net: ena: fix race condition between submit and completion admin command
Bug:
"Completion context is occupied" error printout will be noticed in
dmesg.
This error will cause the admin command to fail, which will lead to
an ena_probe() failure or a watchdog reset (depends on which admin
command failed).
Root cause:
__ena_com_submit_admin_cmd() is the function that submits new entries to
the admin queue.
The function have a check that makes sure the queue is not full and the
function does not override any outstanding command.
It uses head and tail indexes for this check.
The head is increased by ena_com_handle_admin_completion() which runs
from interrupt context, and the tail index is increased by the submit
function (the function is running under ->q_lock, so there is no risk
of multithread increment).
Each command is associated with a completion context. This context
allocated before call to __ena_com_submit_admin_cmd() and freed by
ena_com_wait_and_process_admin_cq_interrupts(), right after the command
was completed.
This can lead to a state where the head was increased, the check passed,
but the completion context is still in use.
Solution:
Use the atomic variable ->outstanding_cmds instead of using the head and
the tail indexes.
This variable is safe for use since it is bumped in get_comp_ctx() in
__ena_com_submit_admin_cmd() and is freed by comp_ctxt_release()
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:45 +0000 (15:42 +0300)]
net: ena: add missing return when ena_com_get_io_handlers() fails
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:44 +0000 (15:42 +0300)]
net: ena: fix bug that might cause hang after consecutive open/close interface.
Fixing a bug that the driver does not unmask the IO interrupts
in ndo_open():
occasionally, the MSI-X interrupt (for one or more IO queues)
can be masked when ndo_close() was called.
If that is followed by ndo open(),
then the MSI-X will be still masked so no interrupt
will be received by the driver.
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Sun, 11 Jun 2017 12:42:43 +0000 (15:42 +0300)]
net: ena: fix rare uncompleted admin command false alarm
The current flow to detect admin completion is:
while (command_not_completed) {
if (timeout)
error
check_for_completion()
sleep()
}
So in case the sleep took more than the timeout
(in case the thread/workqueue was not scheduled due to higher priority
task or prolonged VMexit), the driver can detect a stall even if
the completion is present.
The fix changes the order of this function to first check for
completion and only after that check if the timeout expired.
Fixes:
1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 11 Jun 2017 19:02:01 +0000 (12:02 -0700)]
Merge tag 'random_for_linus_stable' of git://git./linux/kernel/git/tytso/random
Pull randomness fixes from Ted Ts'o:
"Improve performance by using a lockless update mechanism suggested by
Linus, and make sure we refresh per-CPU entropy returned get_random_*
as soon as the CRNG is initialized"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: invalidate batched entropy after crng init
random: use lockless method of accessing and updating f->reg_idx
Linus Torvalds [Sun, 11 Jun 2017 18:57:47 +0000 (11:57 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix various bug fixes in ext4 caused by races and memory allocation
failures"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fdatasync(2) after extent manipulation operations
ext4: fix data corruption for mmap writes
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO
ext4: fix quota charging for shared xattr blocks
ext4: remove redundant check for encrypted file on dio write path
ext4: remove unused d_name argument from ext4_search_dir() et al.
ext4: fix off-by-one error when writing back pages before dio read
ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()
ext4: keep existing extra fields when inode expands
ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors
ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff()
ext4: fix SEEK_HOLE
jbd2: preserve original nofs flag during journal restart
ext4: clear lockdep subtype for quota files on quota off
Linus Torvalds [Sun, 11 Jun 2017 18:34:27 +0000 (11:34 -0700)]
Merge tag 'gpio-v4.12-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A few overdue GPIO patches for the v4.12 kernel.
- Fix debounce logic on the Aspeed platform.
- Fix the "virtual gpio" things on the Intel Crystal Cove.
- Fix the blink counter selection on the MVEBU platform"
* tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: fix gpio bank registration when pwm is used
gpio: mvebu: fix blink counter register selection
MAINTAINERS: remove self from GPIO maintainers
gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs
gpio: aspeed: Don't attempt to debounce if disabled
Linus Torvalds [Sun, 11 Jun 2017 18:29:15 +0000 (11:29 -0700)]
Merge tag 'char-misc-4.12-rc5' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 4.12-rc5. Nothing major here,
just some small bugfixes found by people testing, and a MAINTAINERS
file update for the genwqe driver.
All have been in linux-next with no reported issues"
[ The cxl driver fix came in through the powerpc tree earlier ]
* tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
cxl: Avoid double free_irq() for psl,slice interrupts
mei: make sysfs modalias format similar as uevent modalias
drivers: char: mem: Fix wraparound check to allow mappings up to the end
MAINTAINERS: Change maintainer of genwqe driver
goldfish_pipe: use GFP_ATOMIC under spin lock
firmware: vpd: do not leak kobjects
firmware: vpd: avoid potential use-after-free when destroying section
firmware: vpd: do not leave freed section attributes to the list
Linus Torvalds [Sun, 11 Jun 2017 18:25:51 +0000 (11:25 -0700)]
Merge tag 'staging-4.12-rc5' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"These are mostly all IIO driver fixes, resolving a number of tiny
issues. There's also a ccree and lustre fix in here as well, both fix
problems found in those codebases.
All have been in linux-next with no reported issues"
* tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ccree: fix buffer copy
staging/lustre/lov: remove set_fs() call from lov_getstripe()
staging: ccree: add CRYPTO dependency
iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function
iio: light: ltr501 Fix interchanged als/ps register field
iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
iio: adc: max9611: Fix attribute measure unit
iio: adc: ti_am335x_adc: allocating too much in probe
iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
iio: proximity: as3935: fix iio_trigger_poll issue
iio: proximity: as3935: fix AS3935_INT mask
iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
iio: proximity: as3935: recalibrate RCO after resume
Linus Torvalds [Sun, 11 Jun 2017 18:23:10 +0000 (11:23 -0700)]
Merge tag 'usb-4.12-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.12-rc5
They are for some reported issues in the chipidea and gadget drivers.
Nothing major. All have been in linux-next for a while with no
reported issues"
* tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing
usb: gadget: udc: renesas_usb3: lock for PN_ registers access
usb: gadget: udc: renesas_usb3: fix deadlock by spinlock
usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling
usb: gadget: f_mass_storage: Serialize wake and sleep execution
usb: dwc2: add support for the DWC2 controller on Meson8 SoCs
phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer
usb: musb: dsps: keep VBUS on for host-only mode
usb: chipidea: core: check before accessing ci_role in ci_role_show
usb: chipidea: debug: check before accessing ci_role
phy: qcom-qmp: fix return value check in qcom_qmp_phy_create()
usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
usb: chipidea: imx: Do not access CLKONOFF on i.MX51
Linus Torvalds [Sun, 11 Jun 2017 18:21:08 +0000 (11:21 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of user visible fixes (excepting one format string
change).
Four of the qla2xxx fixes only affect the firmware dump path, but it's
still important to the enterprise. The rest are various NULL pointer
crash conditions or outright driver hangs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxgb4i: libcxgbi: in error case RST tcp conn
scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled
scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
scsi: lpfc: prevent potential null pointer dereference
scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort()
scsi: lpfc: nvmet_fc: fix format string
scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx
scsi: qla2xxx: Fix mailbox pointer error in fwdump capture
scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC
scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues
scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue
scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call
scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive
scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
scsi: qla2xxx: don't disable a not previously enabled PCI device
Linus Torvalds [Sun, 11 Jun 2017 18:15:09 +0000 (11:15 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"We expanded the device-dax fs type in 4.12 to be a generic provider of
a struct dax_device with an embedded inode. However, Sasha found some
basic negative testing was not run to verify that this fs cleanly
handles being mounted directly.
Note that the fresh rebase was done to remove an unnecessary Cc:
<stable> tag, but this commit otherwise had a build success
notification from the 0day robot."
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fix 'dax' device filesystem inode destruction crash
Linus Torvalds [Sun, 11 Jun 2017 18:09:15 +0000 (11:09 -0700)]
Merge tag 'hexagon-for-linus-v4.12-rc5' of git://git./linux/kernel/git/groeck/linux-staging
Pull hexagon fix from Guenter Roeck:
"This fixes a build error seen when building hexagon images.
Richard sent me an Ack, but didn't reply when asked if he wants me to
send the patch to you directly, so I figured I'd just do it"
* tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hexagon: Use raw_copy_to_user
Linus Torvalds [Sun, 11 Jun 2017 18:07:25 +0000 (11:07 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bug fixes (ARM, s390, x86)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: async_pf: avoid async pf injection when in guest mode
KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
arm: KVM: Allow unaligned accesses at HYP
arm64: KVM: Allow unaligned accesses at EL2
arm64: KVM: Preserve RES1 bits in SCTLR_EL2
KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
KVM: nVMX: Fix exception injection
kvm: async_pf: fix rcu_irq_enter() with irqs enabled
KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extraction
KVM: s390: fix ais handling vs cpu model
KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration
Majd Dibbiny [Sun, 28 May 2017 11:47:56 +0000 (14:47 +0300)]
net/mlx5: Enable 4K UAR only when page size is bigger than 4K
When the page size isn't bigger than 4K, there is no added value of enabling 4K
UAR feature in the Firmware.
Modified the condition of enabling the 4K UAR accordingly.
Fixes:
f502d834950a ("net/mlx5: Activate support for 4K UARs")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tal Gilboa [Mon, 29 May 2017 14:02:55 +0000 (17:02 +0300)]
net/mlx5e: Fix wrong indications in DIM due to counter wraparound
DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for
changing the channel interrupt moderation values in order to reduce CPU
overhead for all traffic types.
Each iteration of the algorithm, DIM calculates the difference in
throughput, packet rate and interrupt rate from last iteration in order
to make a decision. DIM relies on counters for each metric. When these
counters get to their type's max value they wraparound. In this case
the delta between 'end' and 'start' samples is negative and when
translated to unsigned integers - very high. This results in a false
indication to the algorithm and might result in a wrong decision.
The fix calculates the 'distance' between 'end' and 'start' samples in a
cyclic way around the relevant type's max value. It can also be viewed as
an absolute value around the type's max value instead of around 0.
Testing show higher stability in DIM profile selection and no wraparound
issues.
Fixes:
cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tal Gilboa [Mon, 15 May 2017 11:13:16 +0000 (14:13 +0300)]
net/mlx5e: Added BW check for DIM decision mechanism
DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for
changing the channel interrupt moderation values in order to reduce CPU
overhead for all traffic types.
Until now only interrupt and packet rate were sampled.
We found a scenario on which we get a false indication since a change in
DIM caused more aggregation and reduced packet rate while increasing BW.
We now regard a change as succesfull iff:
current_BW > (prev_BW + threshold) or
current_BW ~= prev_BW and current_PR > (prev_PR + threshold) or
current_BW ~= prev_BW and current_PR ~= prev_PR and
current_IR < (prev_IR - threshold)
Where BW = Bandwidth, PR = Packet rate and IR = Interrupt rate
Improvements (ConnectX-4Lx 25GbE, single RX queue, LRO off)
--------------------------------------------------
packet size | before[Mb/s] | after[Mb/s] | gain |
2B | 343.4 | 359.4 | 4.5% |
16B | 2739.7 | 2814.8 | 2.7% |
64B | 9739 | 10185.3 | 4.5% |
Fixes:
cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Mon, 8 May 2017 16:46:50 +0000 (11:46 -0500)]
net/mlx5: Remove several module events out of ethtool stats
Remove the following module event counters out of ethtool stats. The
reason for removing these event counters is that these events do not
occur without techinician's intervention.
module_pwr_budget_exd
module_long_range
module_no_eeprom
module_enforce_part
module_unknown_id
module_unknown_status
module_plug
Fixes:
bedb7c909c19 ("net/mlx5e: Add port module event counters to ethtool stats")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mohamad Haj Yahia [Sun, 9 Apr 2017 14:19:37 +0000 (17:19 +0300)]
net/mlx5: Continue health polling until it is explicitly stopped
The issue is that when we get an assert we will stop polling the health
and thus we cant enter error state when we have a real health issue.
Fixes:
fd76ee4da55a ('net/mlx5_core: Fix internal error detection conditions')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mohamad Haj Yahia [Thu, 25 May 2017 13:46:14 +0000 (16:46 +0300)]
net/mlx5: Fix create vport flow table flow
Send vport number to the create flow table inner method instead of
ignoring the vport argument and sending always 0.
Fixes:
b3ba51498bdd ('net/mlx5: Refactor create flow table method to accept underlay QP')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Wanpeng Li [Fri, 9 Jun 2017 03:13:40 +0000 (20:13 -0700)]
KVM: async_pf: avoid async pf injection when in guest mode
INFO: task gnome-terminal-:1734 blocked for more than 120 seconds.
Not tainted 4.12.0-rc4+ #8
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
gnome-terminal- D 0 1734 1015 0x00000000
Call Trace:
__schedule+0x3cd/0xb30
schedule+0x40/0x90
kvm_async_pf_task_wait+0x1cc/0x270
? __vfs_read+0x37/0x150
? prepare_to_swait+0x22/0x70
do_async_page_fault+0x77/0xb0
? do_async_page_fault+0x77/0xb0
async_page_fault+0x28/0x30
This is triggered by running both win7 and win2016 on L1 KVM simultaneously,
and then gives stress to memory on L1, I can observed this hang on L1 when
at least ~70% swap area is occupied on L0.
This is due to async pf was injected to L2 which should be injected to L1,
L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host
actually), and L1 guest starts accumulating tasks stuck in D state in
kvm_async_pf_task_wait() since missing PAGE_READY async_pfs.
This patch fixes the hang by doing async pf when executing L1 guest.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guenter Roeck [Wed, 3 May 2017 03:44:16 +0000 (20:44 -0700)]
hexagon: Use raw_copy_to_user
Commit
ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") replaced
__copy_to_user_hexagon() with raw_copy_to_user(), but did not catch
all callers, resulting in the following build error.
arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon':
arch/hexagon/mm/uaccess.c:40:3: error:
implicit declaration of function '__copy_to_user_hexagon'
Fixes:
ac4691fac8ad ("hexagon: switch to RAW_COPY_USER")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
David S. Miller [Sat, 10 Jun 2017 22:22:56 +0000 (18:22 -0400)]
Merge branch 'mvpp2-fixes'
Thomas Petazzoni says:
====================
net: mvpp2: driver fixes
As requested, here is a series of patches containing only bug fixes
for the mvpp2 driver. It is based on the latest "net" branch.
Changes since v1:
- Fixed a build breakage that occurred when only PATCH 1 was only,
and not later patches in the series. Was reported by the kbuild
report on the first submission.
- Added Tested-by from Marc Zyngier on PATCH 2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Sat, 10 Jun 2017 21:18:22 +0000 (23:18 +0200)]
net: mvpp2: use {get, put}_cpu() instead of smp_processor_id()
smp_processor_id() should not be used in migration-enabled contexts. We
originally thought it was OK in the specific situation of this driver,
but it was wrong, and calling smp_processor_id() in a migration-enabled
context prints a big fat warning when CONFIG_DEBUG_PREEMPT=y.
Therefore, this commit replaces the smp_processor_id() in
migration-enabled contexts by the appropriate get_cpu/put_cpu sections.
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Fixes:
a786841df72e ("net: mvpp2: handle register mapping and access for PPv2.2")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Sat, 10 Jun 2017 21:18:21 +0000 (23:18 +0200)]
net: mvpp2: remove mvpp2_bm_cookie_{build,pool_get}
This commit removes the useless remove
mvpp2_bm_cookie_{build,pool_get} functions. All what
mvpp2_bm_cookie_build() was doing is compute a 32-bit value by
concatenating the pool number and the CPU number... only to get the pool
number re-extracted by mvpp2_bm_cookie_pool_get() later on.
Instead, just get the pool number directly from RX descriptor status,
and pass it to mvpp2_pool_refill() and mvpp2_rx_refill().
This has the added benefit of dropping a smp_processor_id() call in a
migration-enabled context, which is wrong, and is the original
motivation for making this change.
Fixes:
3f518509dedc9 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Sat, 10 Jun 2017 09:03:35 +0000 (17:03 +0800)]
net: tipc: Fix a sleep-in-atomic bug in tipc_msg_reverse
The kernel may sleep under a rcu read lock in tipc_msg_reverse, and the
function call path is:
tipc_l2_rcv_msg (acquire the lock by rcu_read_lock)
tipc_rcv
tipc_sk_rcv
tipc_msg_reverse
pskb_expand_head(GFP_KERNEL) --> may sleep
tipc_node_broadcast
tipc_node_xmit_skb
tipc_node_xmit
tipc_sk_rcv
tipc_msg_reverse
pskb_expand_head(GFP_KERNEL) --> may sleep
To fix it, "GFP_KERNEL" is replaced with "GFP_ATOMIC".
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Sat, 10 Jun 2017 08:49:39 +0000 (16:49 +0800)]
net: caif: Fix a sleep-in-atomic bug in cfpkt_create_pfx
The kernel may sleep under a rcu read lock in cfpkt_create_pfx, and the
function call path is:
cfcnfg_linkup_rsp (acquire the lock by rcu_read_lock)
cfctrl_linkdown_req
cfpkt_create
cfpkt_create_pfx
alloc_skb(GFP_KERNEL) --> may sleep
cfserl_receive (acquire the lock by rcu_read_lock)
cfpkt_split
cfpkt_create_pfx
alloc_skb(GFP_KERNEL) --> may sleep
There is "in_interrupt" in cfpkt_create_pfx to decide use "GFP_KERNEL" or
"GFP_ATOMIC". In this situation, "GFP_KERNEL" is used because the function
is called under a rcu read lock, instead in interrupt.
To fix it, only "GFP_ATOMIC" is used in cfpkt_create_pfx.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 10 Jun 2017 20:44:28 +0000 (16:44 -0400)]
Revert "net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272"
This reverts commit
bf292f1b2c813f1d6ac49b04bd1a9863d8314266.
It belongs in 'net-next' not 'net'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 10 Jun 2017 06:48:14 +0000 (14:48 +0800)]
sctp: disable BH in sctp_for_each_endpoint
Now sctp holds read_lock when foreach sctp_ep_hashtable without disabling
BH. If CPU schedules to another thread A at this moment, the thread A may
be trying to hold the write_lock with disabling BH.
As BH is disabled and CPU cannot schedule back to the thread holding the
read_lock, while the thread A keeps waiting for the read_lock. A dead
lock would be triggered by this.
This patch is to fix this dead lock by calling read_lock_bh instead to
disable BH when holding the read_lock in sctp_for_each_endpoint.
Fixes:
626d16f50f39 ("sctp: export some apis or variables for sctp_diag and reuse some for proc")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Estevam [Sat, 10 Jun 2017 01:37:22 +0000 (22:37 -0300)]
net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272
Commit
2b30842b23b9 ("net: fec: Clear and enable MIB counters on imx51")
introduced fec_enet_clear_ethtool_stats(), but missed to add a stub
for the CONFIG_M5272=y case, causing build failure for the
m5272c3_defconfig.
Add the missing empty stub to fix the build failure.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dominik Heidler [Fri, 9 Jun 2017 14:29:47 +0000 (16:29 +0200)]
l2tp: cast l2tp traffic counter to unsigned
This fixes a counter problem on 32bit systems:
When the rx_bytes counter reached 2 GiB, it jumpd to (2^64 Bytes - 2GiB) Bytes.
rtnl_link_stats64 has __u64 type and atomic_long_read returns
atomic_long_t which is signed. Due to the conversation
we get an incorrect value on 32bit systems if the MSB of
the atomic_long_t value is set.
CC: Tom Parkin <tparkin@katalix.com>
Fixes:
7b7c0719cd7a ("l2tp: avoid deadlock in l2tp stats update")
Signed-off-by: Dominik Heidler <dheidler@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philippe Reynes [Fri, 9 Jun 2017 21:50:57 +0000 (23:50 +0200)]
net: aquantia: atlantic: remove declaration of hw_atl_utils_hw_set_power
This function is not defined, so no need to declare it.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 10 Jun 2017 20:02:56 +0000 (16:02 -0400)]
Merge branch 'bnx2x-Fix-malicious-VFs-indication'
Yuval Mintz says:
====================
bnx2x: Fix malicious VFs indication
It was discovered that for a VF there's a simple [yet uncommon] scenario
which would cause device firmware to declare that VF as malicious -
Add a vlan interface on top of a VF and disable txvlan offloading for
that VF [causing VF to transmit packets where vlan is on payload].
Patch #1 corrects driver transmission to prevent this issue.
Patch #2 is a by-product correcting PF behavior once a VF is declared
malicious.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Fri, 9 Jun 2017 14:17:02 +0000 (17:17 +0300)]
bnx2x: Don't post statistics to malicious VFs
Once firmware indicates that a given VF is malicious and until
that VF passes an FLR all bets are off - PF can't know anything
is happening to the VF [since VF can't communicate anything to its PF].
But PF is currently still periodically asking device to collect
statistics for the VF which might in turn fill logs by IOMMU blocking
memory access done by the VF's PCI function [in the case VF has unmapped
its buffers].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Fri, 9 Jun 2017 14:17:01 +0000 (17:17 +0300)]
bnx2x: Allow vfs to disable txvlan offload
VF clients are configured as enforced, meaning firmware is validating
the correctness of their ethertype/vid during transmission.
Once txvlan is disabled, VF would start getting SKBs for transmission
here vlan is on the payload - but it'll pass the packet's ethertype
instead of the vid, leading to firmware declaring it as malicious.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 10 Jun 2017 18:09:23 +0000 (11:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull UFS fixes from Al Viro:
"This is just the obvious backport fodder; I'm pretty sure that there
will be more - definitely so wrt performance and quite possibly
correctness as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: we need to sync inode before freeing it
excessive checks in ufs_write_failed() and ufs_evict_inode()
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
ufs: set correct ->s_maxsize
ufs: restore maintaining ->i_blocks
fix ufs_isblockset()
ufs: restore proper tail allocation
Linus Torvalds [Sat, 10 Jun 2017 18:06:05 +0000 (11:06 -0700)]
Merge branch 'for-linus-4.12' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Some fixes that Dave Sterba collected.
We've been hitting an early enospc problem on production machines that
Omar tracked down to an old int->u64 mistake. I waited a bit on this
pull to make sure it was really the problem from production, but it's
on ~2100 hosts now and I think we're good.
Omar also noticed a commit in the queue would make new early ENOSPC
problems. I pulled that out for now, which is why the top three
commits are younger than the rest.
Otherwise these are all fixes, some explaining very old bugs that
we've been poking at for a while"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix delalloc accounting leak caused by u32 overflow
Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
btrfs: tree-log.c: Wrong printk information about namelen
btrfs: fix race with relocation recovery and fs_root setup
btrfs: fix memory leak in update_space_info failure path
btrfs: use correct types for page indices in btrfs_page_exists_in_range
btrfs: fix incorrect error return ret being passed to mapping_set_error
btrfs: Make flush bios explicitely sync
btrfs: fiemap: Cache and merge fiemap extent before submit it to user
Linus Torvalds [Sat, 10 Jun 2017 17:51:25 +0000 (10:51 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a Geode fix plus a microcode loader fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/intel: Clear patch pointer before jettisoning the initrd
x86/cpu/cyrix: Add alternative Device ID of Geode GX1 SoC
Linus Torvalds [Sat, 10 Jun 2017 17:49:42 +0000 (10:49 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"An error handling corner case fix"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Drop the device lock on error
Linus Torvalds [Sat, 10 Jun 2017 17:22:35 +0000 (10:22 -0700)]
Merge branch 'rcu-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU fixes from Ingo Molnar:
"Fix an SRCU bug affecting KVM IRQ injection"
* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
srcu: Allow use of Classic SRCU from both process and interrupt context
srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
Linus Torvalds [Sat, 10 Jun 2017 17:15:47 +0000 (10:15 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This is mostly tooling fixes, plus an instruction pointer filtering
fix.
It's more fixes than usual - Arnaldo got back from a longer vacation
and there was a backlog"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf symbols: Kill dso__build_id_is_kmod()
perf symbols: Keep DSO->symtab_type after decompress
perf tests: Decompress kernel module before objdump
perf tools: Consolidate error path in __open_dso()
perf tools: Decompress kernel module when reading DSO data
perf annotate: Use dso__decompress_kmodule_path()
perf tools: Introduce dso__decompress_kmodule_{fd,path}
perf tools: Fix a memory leak in __open_dso()
perf annotate: Fix symbolic link of build-id cache
perf/core: Drop kernel samples even though :u is specified
perf script python: Remove dups in documentation examples
perf script python: Updated trace_unhandled() signature
perf script python: Fix wrong code snippets in documentation
perf script: Fix documentation errors
perf script: Fix outdated comment for perf-trace-python
perf probe: Fix examples section of documentation
perf report: Ensure the perf DSO mapping matches what libdw sees
perf report: Include partial stacks unwound with libdw
perf annotate: Add missing powerpc triplet
perf test: Disable breakpoint signal tests for powerpc
...
Linus Torvalds [Sat, 10 Jun 2017 17:12:14 +0000 (10:12 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fix from Ingo Molnar:
"A boot crash fix for certain systems where the kernel would trust a
piece of firmware data it should not have"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Fix boot panic because of invalid BGRT image address
Al Viro [Sat, 10 Jun 2017 16:01:50 +0000 (12:01 -0400)]
ufs: we need to sync inode before freeing it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>